Innovative Technology Inventory (ITI)
Praxair Services, Inc.
Tracer Tight™
Company Address: 107 Clear Creek Drive Bear, DE 19701 Contact: Jerry Kolek Phone #: (302) 897-9582 Fax #: (609) 386-3474 E-mail: Jerry_Kolek@praxair.com Website: www.praxair.com ![]() |
Technology Type:
Detection/Monitoring and Remediation
Technology Description:
Service interruptions are costly and disruptive to tank owners.
When there is a leak, the Tracer Tight™ test
can discover it before it becomes a serious problem that may lead
to expensive remediation and liability expense. The Enhanced Tracer Tight™ is a variation of the standard Tracer
Tight™ test, but with greater leak sensitivity. The standard
test provides a leak sensitivity of 0.05 gallons per hour (gph),
while the enhanced version provides a leak sensitivity of 0.005
gph. The Enhanced Tracer Tight™ test was developed
to meet the 0.005 gph leak detection requirement set forth by the
State of California Water Resource Control Board (SWRCB). This one
order of magnitude improvement is achieved by strategically adding
additional data points (probes), and by altering the amount of "tracer"
compound introduced into the system. The objective is to identify
any releases from a system (liquid and/or vapor).
Application:
The Tracer Tight™ test is effective for all types of installations,
including tanks and pipes buried under pavement, concrete or buildings.
It provides a rapid and cost-effective means of assessing pipeline
integrity through new super-sensitive tracer chemical technology.
Environmental Benefits:
Pipeline integrity becomes more proactive and not reactive because
miles of line can be scanned for small "seeper" size leaks
quickly and inexpensively.
Performance:
Leaks as small as a gallon a day can be identified and located for
repair. Depending on pipeline route, up to 4-5 miles of pipeline
a day can be evaluated.
In addition, Tracer Tight™ has/is:
- No Fill Requirement: Enhanced Tracer Tight™ does not require specific levels of product, like some volumetric test methods. In fact, tanks can be tested completely empty.
- No Down Time: Enhanced Tracer Tight™ does not inhibit system operation. Your system will remain in use during the entire test period.
- Not affected by hydrocarbons in the soil from previous leaks or spills.
- Accepted by the State of California Water Resource Control Board as a method capable of achieving the 0.005 gph leak detection requirement.
- Third-Party approved evaluation by Ken Wilcox & Associates.
Limitations:
Pipeline route needs to be located accurately and cleared adequately
to allow sampling equipment to be dragged over the surface of the
ground.
Cost:
Please contact the company for pricing.