This procurement is being procured in accordance with FAR Part 13, Simplified Acquisition Procedures. NOAA, Marine Engineering Division located in Seattle, WA requires a contractor is to install components listed on the attached sheets into new cabinets that will be installed on board the ship at a later date.

 The equipment being installed is to provide automatic load control for all four ship's generators that will control both loading and unloading generators as appropriate when putting a generator on line or taking it off line to ensure that electrical loads are minimized during this process. The system is to work directly with existing ship's generators and primary electrical systems. Regulating instruments and transformers are to be replaced as required for proper load monitoring and control. Specifically, the modifications will include providing a Woodward AGLC control panel, logic circuits for relays, and revision of the current transformers that feed the existing load share modules.

 In order to provide proper load sharing between generators under any configuration for power generation, the new cabinets are to also incorporate new Basler DECS 200 digital voltage regulators. The work for the new regulators will include replacement of droop current transformers, replacing voltage feedback transformers to reduce feedback from 600 to 120 volts, and replacement of switchboard and console meters to provide operators with accurate and reliable monitoring information.

 The new digital regulator and load control components will be delivered at a later date to a location that has yet to be determined. The contractor will store completed cabinets at his facility until this information is available.

PRINCIPAL PARTS DATA AND SOURCE INFORMATION
Device designation: Generator Voltage regulator
Description: 32/65/125 VDC output ,24/48 VDC control power
Manufacturer: Basler Electric Mfg. CO.
PIN: DECS2001L
Source: Basler Electric Mfg. Co, Highland II.
Device designation: Speed switch
Description: Digital programmable speed sensitive switch module
Manufacturer: Airpax Instrument Division of Phillips Inc.
PIN: T77430-02
Source: Spectrum Ind., Peabody, Ma.
Device designation: AGLC
Description: Generator loading control module
Manufacturer: Woodward Governor o.
PIN: 9905-096 M
Source: Seacoast Fuel Injection, Elliot, Me
Device designation: Keep aiive power supply
Description: 25 VDC output, 3.5 amps, 120 VAC input
Manufacturer: Accopian Co. Easton, Pa.
PIN: B25G3S0
Source: Accopian
Device designation: Lockout relay
Description: 4 stage, 120 VAC operating voltage, hand reset
Manufacturer: Shallco, Smithfield, NC 27577
PIN: 7604D
Source: Spectrum Ind. Peabody, Ma.
Device designation: Voltage control switch
Description: 3 position spring return to center engraved Raise norm Lower
Manufacturer: Shallco, Smithfield, NC 27577
PIN: 2627D
Source: Spectrum Ind., Peabody, Ma.
1

Automatic Generator Loading Control
QTY: 4
MFG: Woodward
PIN: 990S-096M (no substitution)
Unload pushbutton (required for local manual unload)
QTY: 4
MFG: Square D
Operator
?ize: 30MM
PIN: 9001KR2U with Yellow color cap
Contact block
PIN: 9001KA1
Logic relay:
Qty: 8
Mfg: Struthers Dunn
PIN: 219DXPL33-120 (no substitution)
Voltage: coil operating voltage 120 VAC
RELAY SOCKET:
Qty: 8
MFG: Struthers Dunn
PIN: 33377 (no substitution)
Terminal boards:
Qty: 12
MFG: General Electric Co.
PIN: CR1S1B213A (no substitution)
Relay S2 trip:
Qty: 4
MFG: Dayton I Grainger
PIN: SX824
Voltage: operating coil 120 VAC
Relay socket
Qty: 4
MFG: Dayton I Grainger
PIN: SX8S2
AGLC Modification and parts list description
Device designation: Over voltage module
Description: Time over voltage relay, Nom 120 VAC sense, adj to 1255 nom td 0 -10 sec
Manufacturer: Basler Electric Mfg. Co.
PIN: BE# 59t 1A1N1
Source: Basler Electric Mfg. Co, Highland II
Device designation: relay G!, G2, G3, G4
Description: 5 NIC, 1 NIO bifurcated contacts, 120 volt AC operating coil
Manufacturer: Struthers Dunn
PIN: 219AEXP33-120
Source: Universal Electric Supply Co. Auburn, NJ. 8003273529
Device designation: Relay bus tie & load share lines
Description: 4 form Ccontacts, bifurcated, 120 volt AC operating coil
Manufacturer: Struthers Dunn
PIN: 219XDXPL33-120
Source: Universal Electric Supply Co. Auburn, NJ. 800327 3529
Device designation: Relay socket
Description: socket for all type 219 relays
Manufacturer: Struthers Dunn
PIN: 33377
Source: Universal Electric Supply Co., Auburn, NJ. 800327 3529
Device designation: Resistor exciter field
Description: 1 ohm, 300 watt, adjustable
Manufacturer: Ohmite
PIN: E300K10E
Source: Allied Electronics 8004335700 (Allied PIN: 296-5922)
Device designation: Current transformer droop large generator
Description: 1600 I 5 amps ratio, C80 burden capacity
Manufacturer: ITI I GE
PIN: 561- 162
Source: Spectrum Ind., Peabody, Ma. 800 644 9773
Device designation: Current transformer droop small generator
Description: 1200 I 5 amps ratio, C80 burden cap
Manufacturer: ITI/GE
PIN: 561-122
Source: Spectrum Industries, Peabody, Ma. 8006449773
Device designation: Potential transformer Voltage regulator
Description: 600 volt primary, 120 volt secondary, SO VA thermal capacity
Manufacturer: ITI / GE
PIN: 468-600
Source: Spectrum Ind. peabody, Ma. 8006449773
Device designation: Potential transformer metering
Description: 600 volt primary, 120 volt secondary, 1S0 VA thermal capacity
Manufacturer: ITI / GE
PIN: 46S-600
Source: Spectrum Industries, Peabody, Ma. 8006449773
Device designation: Terminal board
Description: 13 point, 30 amp 600 volt, Hi barrier, pan head screw both sides
Manufacturer: GE
PIN: CR1S1B213A
Source: GE
Device designation: Terminal board
Description: 6 point, 30 amp, 600 volt, Hi barrier, pan head screw both sides
Manufacturer: GE
PIN: CR151B6
Source: GE
Device designation: KW / KVAR Meter
Description: 2 display digital power meter, 3 phase 3 wire 2000/5 ct ratio, 5/1 Pot ratio Power Rseries
Manufacturer: YEW
PIN: assigned at time of manufacturer due to special ct / pt ratio and scale
Source: Spectrum Industries, Peabody, Ma. 8006449773
Device designation: KW / KVAR Meter
Description: 2 display digital power meter, 3 phase 3 wire 1500/5 ct ratio, 5/1 Pot ratio Power Rseries
Manufacturer: YEW
PIN: assigned at time of manufacturer due to special ct / pt ratio and scale
Source: Spectrum Industries, Peabody, Ma. 8006449773
Device designation: Amps, Volts, Frequency Meter
Description: 3 line display single phase 120 volt sense,S amp sense, 120 volt Ac control power
Manufacturer: YEW
PIN: Assigned at time of manufacture
Source: Spectrum Industries, Peabody, Ma. 800 644 9773
Device designation: Metering transducer
Description: digital output, 3 phase 3 wire input, 120 volt AC / S amps nominal
Manufacturer: GE
PIN: IC660BpmlOO
Source: GE
Device designation: Regulator enclosure
Description: Special Mfg to order to specifications supplied by purchaser
Manufacturer: Barber Electric Mfg. Co., N Attleboro, Ma.
PIN: 11B781922-1
Source: Graybar Electric Supply, Manchester, NH
Device designation: Aux device enclosure
Description: Special Mfg to order to specifications supplied by purchaser
Manufacturer: Barber Electric Mfg. Co, N Attleboro, Ma.
PIN: 11B781922-2
Source: Graybar electric supply, Manchester, NH
Device designation: Metering device enclosure
Description: Special Mfg to order to specifications supplied by purchaser
Manufacturer: Barber Electric Mfg. Co. N. Attleboro, Ma.
PIN: number assigned at time of manufacture
Source: Graybar Electric supply, Manchester, NH
Device designation: Unload pushbutton operator
Description: 30MM Machine tool pushbutton operator with yellow color cap
Manufacturer: Square D
PIN: 9001KR2U
Source: Grainger Supply Co.
Device designation: Contact block
Description: contact block for AGLC unload function
Manufacturer: Square D
P/N: 9001KA1
Source: Grainger Supply
Device designation: Relay AGLC X
Description: 8 Pin octal base relay, 2 form Ccontacts, 120 volt AC operating coil
Manufacturer: Dayton
PIN: SX824
Source: Grainger Supply
Device designation: Relay socket AGLC X
Description: 8 pin octal base relay socket
Manufacturer: Dayton
PIN: 5X852
Source: Grainger Supply
Device designation: Meter blanking cover
Description: 4" sq meter blank cover with X X 20 studs to fit NEMA standard switchboard meter opening
Manufacturer: Barber Electric Mfg. N Attleboro, Ma.
PIN: No number assigned built on as ordered basis to sketch supplied
Source: Graybar Electric Supply, Manchester, NH
Device designation: Engraved nameplates
Description: Specified on individual basis to sketch
Manufacturer: McGill's dress and Uniform shop, Manchester, NH
PIN: none assigned
Source: McGill's dress and Uniform Shop, Hanover Street, Manchester, NH
Device designation: Power supply mounting plate
Description: Keep alive power supply mounting plate
Manufacturer: Barber Electric Mfg. Co. N Attleboro, Ma
PIN: No number assigned, made to sketch supplied
Source: Graybar Electric supply, Manchester, NH
Device designation:
Description:
Manufacturer:
PIN:
Source
Device designation:
Description:
Manufacturer:
PIN:
Source
Device designation:
Description:
Manufacturer:
PIN:
Source 

This is a simplified acquisition with an estimated value of less than $100,000

****The Western Regional Acquisition Division, requires that all contractors doing business with this Acquisition Office be registered with the Central Contractor Registry (CCR) as of October 1, 2003. After this date, NO award can be made unless the vender is registered in CCR. For additional information and to register in CCR please access the following web site: http://www.ccr.gov. In order to register with the CCR and to be eligible to receive an award from this acquisition office, all offerors must have a Dun & Bradstreet Number. A Dun & Bradstreet number may be acquired free of charge by contacting Dun & Bradstreet on-line at www.dnb.com/eupdate or by phone at (800) 333-0505. All contractors are also required to complete online Representations and Certifications at HTTP://ORCA.BPN.GOV.