CURRICULUM VITAE

Dr. Velimir Radmilovic, principal investigator

 

National Center for Electron Microscopy

Lawrence Berkeley National Laboratory, MS-72

University of California at Berkeley, Berkeley, CA 94729, USA

1-510-486-5663

VRRadmilovic@lbl.gov

 

Education

 

1985     Ph.D. Degree, Physical Metallurgy, University of Belgrade, Serbia

 

Employment

 

2004-Present Principal Investigator, National Center for Electron Microscopy, Lawrence Berkeley National Laboratory, University of California, Berkeley

2002-Present Staff Scientist, National Center for Electron Microscopy, Lawrence Berkeley National Laboratory, University of California, Berkeley

2000-2002  Full Professor, University of Belgrade, Department of Metallurgical Engineering

1998-2000  Staff Scientist, National Center for Electron Microscopy, Lawrence Berkeley National Laboratory, University of California, Berkeley

1995-1998  Full Professor and Department Head, University of Belgrade, Department of Physical Metallurgy

1993-1994  Staff Scientist, National Center for Electron Microscopy, Lawrence Berkeley Laboratory, University of California, Berkeley

1992           Visiting Professor, University of Pittsburgh, Department of Materials Science and Engineering

1991-1993  Associate Professor, University of Belgrade, Department of Physical Metallurgy

1988-1990  Assistant Professor, University of Belgrade, Department of Physical Metallurgy

1987           Visiting Assistant Professor, University of California, Berkeley, Department of Materials Science and Mineral Engineering

1985-1986  Assistant Professor, University of Belgrade, Department of Physical Metallurgy

 

Honors

 

Fulbright Scholar, Fulbright Travel Fellowship, 1986/87

University of California, Berkeley, Postdoctoral Fellowship, 1986

Fellowship, Summer School for "Quantitative Electron Microscopy", University of Glasgow, Scotland, 1983

Fellowship, Summer School "Quantitative Microbeam Analysis", University of Dundee,1992

Steel Mill Niksic Scholarship, 1968/69, 1969/70, 1970/71, and 1971/72, (granted to students with high scholastic record)

 

Grants

 

Research Grant, Department of Energy, Lawrence Berkeley National Laboratory, University of California, Berkeley, 1999-Present.

Ministry of Science and Technology, Serbian Government, Research Grant, 2001-2003

University of Belgrade, Several Research Grants obtained from 1995-1998

University of Pittsburgh, Research Grant, 1992

Allied Signal Research Grants, 1988, 1989, 1990, 1991, 1993

 

Professional Societies

 

TMS, Member, United States

ASM International, Member, United States

Materials Research Society (MRS) Member, United States

Microscopy Society of America (MSA), Member, United States

Serbia Society for Electron Microscopy (SSEM), Vice President and Executive Board Member (1995-2005), Belgrade, Serbia

Yugoslav Materials Research Society (Yu-MRS), Vice President and Executive Board Member (2000-Present), Belgrade, Serbia

Serbian Chemical Society- President of Metallurgical Section (1992-1997), Belgrade, Serbia

Society of Engineers of Serbia (DIT), Member, Belgrade, Serbia

 

Professional Memberships and Services

 

Reviewer for: Metallurgical and Materials Transaction, Materials Science and Engineering, Science, Nanotechnology, Acta Materialia, Scripta Materialia, Diamond and Related Materials, Journal of Materials Science; Reviewer for DOE SBIR-STTR Grant Applications; Member of the ORNL SHaRE external proposal review committee; Organization and teaching of transmission electron microscopy courses at the National Center for Electron Microscopy at LBNL, Berkeley.

 

Research Interests

 

Fundamental aspects of structural phase transformations in solids and solid-solid interfaces. Structure-property relationship in solids. Deformation behavior and fracture mechanisms in solids. Electron microscopy investigation of the structure and distribution of defects such as inclusions, grain boundaries, and dislocations. Characterization of the atomic structure of interfaces by conventional and high-resolution electron microscopy in tandem with computer image simulation. Structure-property relationship in thin films. Nanowires. Catalysts.

 

Current Research Activity

 

- Alloy Design

- Alloy thin films: Al-X (X=Si, Mo,W), Ni-Zr, etc. for MEMS and NEMS applications

- Solid-state phase transformations and interfaces

- Nanostructures embedded in solids

- Pt-based nanoparticles – electrocatalysts,

- Mechanical behavior of structural materials

- SiC thin films and nanowires

- APS (Active Pixel Sensor) detectors for electron microscopy

 

Teaching Experience

 

Graduate and undergraduate courses: Physical Metallurgy, Phase Transformations, Crystallography and Crystal Defects, X-Ray Diffraction, Electron Microscopy, Mechanical Metallurgy, and Heat Treatment.

 

Publications and Citations

 

Over 250 publications in pear review journals (140) and conferences (150).

Publications

Paper published or submitted for publishing in international peer review journals

 

 

C. Ophus, N. Nelson Fitzpatrick, Z. Lee, E. Luber, C. Harrower, K. Westra, U. Dahmen, V. Radmilovic, S. Evoy, and D. Mitlin, “Resonance properties and microstructure of ultracompliant metallic nanoelectromechanical systems resonators synthesized from Al–32 at. %Mo amorphous-nanocrystalline metallic composites”, Applied Physics Letters 92(2008)123108.

 

N.T.Q. Noa, T. Nguyen, Z. Lee, S.H. Kang, V. Radmilovic, E.T. Kim, “Synthesis and ferromagnetism of Co-doped TiO2-delta nanobelts by metallorganic chemical vapor deposition”, Applied Physics Letters 92(2008)122508.

 

N.R. Elezovic, B.M. Babic, V.R. Radmilovic, Lj.M. Vracar and N.V. Krstajic, “Synthesis and characterization of MoOx-Pt/C and TiOx-Pt/C nano-catalysts for oxygen reduction”, Electrochimica Acta, In Press, Accepted Manuscript, Available online 15 March 2008.

 

N.R. Elezovic, B.M. Babic, V.R. Radmilovic, S. Gojkovic, N.V. Krstajic and Lj.M. Vracar, “Pt/C doped by MoOx as the electrocatalyst for oxygen reduction and methanol oxidation”, Journal of Power Sources, 175 (2008) 250-255.

 

Z. Lee, V. Radmilovic, E. Lavernia and S. Nutt, “Deformation and Failure of Bimodal Nanocrystalline Al Alloys”, Materials Science and Engineering A, 2008, Submitted.

 

I. Nikolic, V. Radmilovic, T.Z. Sholklapper, D. Blecic, “Using a FIB to prepare Al(OH)₃ samples for the TEM”, Materials and Technology, 42 (2008) 45-47.

 

Eugenio Zapata-Solvas, Rosalía Poyato, Diego Gómez-García, Arturo Domínguez-Rodríguez, Velimir Radmilovic, and Nitin P. Padture, “Creep-Resistant Composites of Alumina and Single-Wall Carbon Nanotubes”, Applied Physics Letters 92 (2008) 111912.

 

Christopher S. Roper, Velimir Radmilovic, Roger T. Howe, and Roya Maboudian, “Effects of annealing on residual stress and strain gradient of doped polycrystalline SiC thin films”, Elecrochemical and Solid State Letters, 11 (2008) D35-D37.

 

Christopher S. Roper, Velimir Radmilovic, Roger T. Howe, and Roya Maboudian, “Single-Source Chemical Vapor Deposition of SiC Films in a Large-scale LPCVD Reactor: Growth, Chemical, and Mechanical Characterization”, Journal of American Chemical Society, (2008) in press.

 

G.D. Hibbard, V. Radmilovic, K.T. Aust and U. Erb, “Grain boundary migration during abnormal grain growth in nanocrystalline Ni”, Materials Science and Engineering A, (2008) in press.

 

E. Luber, R. Mohammadi, C. Ophus, L. Zee, N. Nelson-Fitzpatrick, K. Westra, S. Evoy, U. Dahmen, V. Radmilovic and D. Mitlin, “Tailoring the microstructure and surface morphology of metal thin films for NEMS applications”, Nanotechnology, 19 (2008) 125705.

 

V. Radmilovic, A. Tolley, E. Marquis, M.D. Rossell, Z. Lee and U. Dahmen, “Monodisperse Al₃(LiScZr) core/shell precipitates in Al alloys”, Scripta Materialia, 58 (2008) 529-532.

 

A. Dato, V. Radmilovic, Z. Lee, J. Phillips, M. Frenklach, Substrate-Free Gas-Phase Synthesis of Graphene Sheets in a Microwave Plasma Reactor, Nanoletters (2008) in press.

 

J.R. Jinschek, K.J. Batenburg, H.A. Calderon, R. Kilaas, V. Radmilovic and C. Kisielowski, “3-D reconstruction of the atomic positions in a simulated gold nanocrystal based on discrete tomography: Prospects of atomic resolution electron tomography”, Ultramicroscopy, In Press, Corrected Proof, Available online 24 October 2007.

 

P. Denes, J.-M. Bussat, Z. Lee, V. Radmillovic, “Active Pixel Sensors for electron microscopy”, Nuclear Instruments and Methods in Physics Research A 579 (2007) 891–894.

 

N. Nelson-Fitzpatrick, C. Ophus, E. Luber, L. Gervais, Z. Lee, V. Radmilovic, D. Mitlin, S. Evoy, “Synthesis and characterization of Au-Ta nanocomposites for nanomechanical cantilever devices”, Nanotechnology, 18 (2007) Art. No. 355303.

 

B.M. Babic, B.V. Kaludjerovic, Lj.M. Vracar, V. Radmilovic, N.V. Krstajic, “Characterization of a surface modified carbon cryogel and a carbon supported Pt catalyst”, Journal of the Serbian Chemical Society, 72 (2007) 773-785.

 

Tal Z. Sholklapper, Velimir Radmilovic, Craig P. Jacobson, Steven J. Visco and Lutgard C. De Jonghe, “Nanocomposite Ag-LSM Solid Oxide Fuel Cell Electrodes”, Journal of Power Sources, 175 (2007) 206-210.

 

B. Jegdic, D.M. Drazic, J.P. Popic, and V. Radmilovic, “Structural effects of metallic chromium on its electrochemical behavior”, Journal of the Serbian Chemical Society, 72 (2007) 563-578.

 

W. Bras, S.M. Clark, G.N. Greaves, M. Kunz, W. van Beek, and V. Radmilovic, “Nano-crystal growth in cordierite glass ceramics studied with X-ray scattering”, Journal of Crystal Growth and Design, 2007, submitted.

 

Susan E. Habas, Hyunjoo Lee, Velimir Radmilovic, Gabor A. Somorjai, and Peidong Yang, “Shaping metal nanocrystals through epitaxial seeded growth”, Nature Materials, 6 (2007) 692 – 697.

 

L. Tomutsa, D. Silin, and V. Radmilovic, “Analysis of Chalk Petrophysical Properties Via Submicron Scale Pore Imaging and Modeling”, SPE Reservoir Evaluation & Engineering Journal, 10 (2007) 285-293; LBNL-59822, 2007.

 

V. Radmilovic, C. Taylor, A. Tolley, D. Mitlin and U. Dahmen, “Nanoindentation Properties and the Microstructure of Grain Boundary Precipitate-Free-Zones (PFZs) in an AlCuSiGe Alloy”, Philosophical magazine, 87 (2007) 3905-3919.

 

E. Spiecker, V. Radmilovic, U. Dahmen, „3D grain structure of CVD-grown polycrystalline SiC films – a quantitative TEM characterization using a new double-wedge geometry”, Acta Materialia, 55 (2007) 3521-3530.

 

Nedeljko V. Krstajic, Ljiljana M. Vracar, Velimir R. Radmilovic, Stelios G. Neophytides, Miranda Labou, Jelena M. Jaksic, Reidar Tunold, Polycarpos Falaras and Milan M. Jaksic, “Advances in interactive supported electrocatalysts for hydrogen and oxygen electrode reactions”, Surface Science, 601 (2007) 1949-1966.

 

Sueng-Hee Kang, Hoa Nguyen, Thi Quynh, Soon-Gil Yoon, Eui-Tae Kim, Zonghoon Lee, Velimir Radmilovic, “Cobalt clustering and ferromagnetism in chemical vapor deposited Ti_1-xCo_xO₂-delta thin films”, Applied Physics Letters 90 (2007) 102504.

 

Quoc Ngo, Alan M Cassell, Velimir Radmilovic, Jun Li, Shoba Krishnan, M. Meyyappan and Cary Y Yang, “Palladium catalyzed formation of carbon nanofibers by plasma enhanced chemical vapor deposition”, Carbon 45 (2007) 424-428.

 

V. Radmilovic, U. Dahmen, D. Gao, C.R. Stoldt, C. Carraro and R. Maboudian, “Formation of <111> fiber texture in b-SiC films deposited on Si(100) substrates”, Diamond and Related materials, 16 (2007) 74-80.

 

Tal Z. Sholklapper, Velimir Radmilovic, Craig P. Jacobson, Steven J. Visco, and Lutgard C. De Jonghe, “Synthesis and Stability of a Nanoparticle-Infiltrated Solid Oxide Fuel Cell Electrode”, Electrochemical and Solid-State Letters, 10 (2007) B74-B76.

 

Arnaud Grosjean, Olivier Sanseau, Velimir Radmilovic, Alain Thorel, “Reactivity and diffusion between La_0.8Sr_0.2MnO₃ and ZrO₂ at interfaces in SOFC cores by TEM analysis on FIB samples tape-casting”, Solid State Ionics, 177 (2006) 1977-1980.

 

D. Mitlin, V. Radmilovic, T.-Y. Pan, Z. Feng, M. L. Santella, “Structure-Properties Relations in Spot Friction Welded (also known as Friction Stir Spot Welded) 6111 Aluminum”, Materials Science and Engineering A, 441 (2006) 79-96.

 

B. Babic B, V. Radmilovic, N. Krstajic, B. Kaludjerovic, “Electrooxidation of hydrogen on nanostructured Pt/C catalysts for polymer electrolyte fuel cells”, Materials Science Forum, 518 (2006) 283-8.

 

Joshua D. Sugar, Joseph T. McKeown, Andreas M. Glaeser, Ronald Gronsky and Velimir Radmilovic, “Spatially confined alloy single crystals for model studies of volumetrically constrained phase transformations”, Applied Physics Letters, 89 (2006) 173102.

 

Laurent Gremillard, Eduardo Saiz, Velimir R. Radmilovic, Antoni P. Tomsia, “Spreading and reaction of a lead-free solder on alumina”, Journal of Materials Research, 21 (2006) 3222-3233.

 

Z. Lee, C. Ophus, L.M. Fischer, N. Nelson-Fitzpatrick, K.L. Westra, S. Evoy, V. Radmilovic, U. Dahmen and D. Mitlin, “Metallic NEMS components fabricated from nanocomposite Al-Mo films”, Nanotechnology 17 (2006) 3063–3070.

 

Christopher S. Roper, Velimir Radmilovic, Roger T. Howe, and Roya Maboudian, “Large-scale Single-Source Chemical Vapor Deposition of SiC Films in a LPCVD Reactor”, Journal of the Electrochemical Society, 153 (2006) C562-C556.

 

J. T. Robinson, J. A. Liddle, A. Minor, V. Radmilovic, and O.D. Dubon, “Morphological evolution of Ge islands on Au-patterned Si”, J. of Crystal Growth, 287 (2006) 518-521.

 

Lj.M. Vracar, N.V. Krstajic, V.R. Radmilovic and M.M. Jaksic, “Electrocatalysis by nanoparticles - oxygen reduction on EBONEX/Pt electrode”, Journal of electroanalytical chemistry, 587 (2006) 99-107.

 

Lj.M. Vracar, S.Lj. Gojkovic, N.R. Elezovic, V.R. Radmilovic, M.M. Jaksic, N.V. Krstajic, “Magneli phase titanium oxides as catalystsupport-electrochemical behaviour of Ebonex/Pt catalyst“, J. of New Materials for Electrochemical Systems, 9 (2006) 99-106.

 

V. Radmilovic, M.K. Miller, D. Mitlin and U. Dahmen, “Strain-compensated nano-clusters in Al-Si-Ge alloys”, Scripta Materialia, 54 (2006) 1973-1978.

 

Y.Park, G.C. King, S.H. Choi, V.R. Radmilovic, A.M. Minor and E.R. Weber, "Ultra-flat GaN Surface Made by Lateral Milling with Ga+ Focused Ion Beam", Applied Physics Letters , 2007, submitted.

 

T.SMintz, Y.V. Bhargava, S.A. Thorne, R. Chopdekar, T. W. Olson, V. Radmilovic, Y. Suzuki, and T.M. Devine, “Electrochemical Synthesis of Funtionalized Oxide Nanowires”, Electrochemical and Solid-State Letters, 8 (2005) D26-D30.

 

J.T. Robinson, J.A. Liddle, A. Minor, V. Radmilovic, D. O. Yi, P. Alex Greaney, K. N. Long, A. Kubota, D. C. Chrzan and O.D. Dubon­, “Metal-mediated assembly of islands arrays: Ge epitaxy on Au-patterned Si (100)”, Nano Letters, 5 (2005) 2070-2073.

 

B.M. Babic, Lj. M. Vracar, V.R. Radmilovic, and N.V. Krstajic, “Carbon Cryogel as Support of Platinum Nano-sized Electrocatalyst for the Hydrogen Oxidation Reaction”, Electrochimica Acta, 51(2006) 3820-3826.

 

N. Ilic, M.T. Jovanovic, V. Radmilovic, Dj. Drobnjak, “Manifestations of dynamic strain ageing in 2090 Al-Li alloy”, Zeitschrift fur Metallkunde 96 (2005) 1386-1390.

 

A.E. Porter, R.K. Nalla, A. Minor, J.R. Jinschek, C. Kisielowski, V. Radmilovic, J.H. Kinney, A.P. Tomsia, R.O. Ritchie, “A transmission electron microscopy study of mineralization in age-induced transparent dentin”, Biomaterials, 26 (2005) 7650-7660.

 

D.D. Gorhe, K.S. Raja, S.A. Namjoshi, V. Radmilovic, A. Tolly, and D.A. Jones, “Electrochemical Methods to Detect Susceptibility of Ni-Cr-Mo-W Alloy-22 to Intergranular Corrosion”, Metallurgical and Materials Transaction, 36A (2005) 1153-1167.

 

R.K. Nalla, A.E. Porter, C. Daraio, A. Minor, V. Radmilovic, E.A. Stach, A.P. Tomsia and R.O. Ritchie, “Ultrastructural examination of dentin using focussed ion-beam cross-sectioning and transmission electron microscopy”, Micron, 36 (2005) 672-680.

 

Tolley, D. Mitlin, V. Radmilovic and U. Dahmen, "Transmission electron microscopy analysis of grain boundary precipitate-free-zones (PFZs) in an AlCuSiGe alloy", Materials Science and Engineering A, 412 (2005) 204-213.

 

Z. Lee, D.B. Witkin, V. Radmilovic, E.J. Lavernia and S.R. Nutt, “Bimodal Microstructure and Deformation of Cryomilled Bulk Nanocrystalline Al-7.5Mg Alloy”, Materials Science and Engineering A, 410-411 (2005) 462-467.

 

V. Radmilovic, T.J. Richardson, S.J. Chen, P.N. Ross Jr., “Carbon-supported Pt–Sn electrocatalysts for the anodic oxidation of H2, CO, and H2/CO mixtures. Part I. Microstructural characterization”, Journal of Catalysis, 232 (2005) 199–209.

 

A.V. Tripkovic, K.Dj. Popovic, J.D. Lovic, N.M. Markovic and V. Radmilovic, “Formic Acid Oxidation on Pt/Ru Nanoparticles: Temperature Effects”, Materials Science Forum, 494 (2005) 223-228.

 

Devesh Deshpande, Ajay Malshe, Eric A. Stach, Velimir Radmilovic, Dennis Alexander, and David Doerr, “Investigation of femtosecond laser assisted nano and microscale modifications in lithium niobate”, Journal of Applied Physics 97, (2005) 74316-1-9.

 

D. Mitlin, A. Schmid and V. Radmilovic, “Transmission Electron Microscopy Based Study of Epitaxy in (001)Cu-Nb Bi-Layer and Tri-Layer Nano-Scale Films”, Applied Physics Letters, 86 (2005) 51904.

 

V. Radmilovic, D. Mitlin and U. Dahmen, “Ultrahard Al-Si thin films”, Materials Science Forum, 494 (2005) 13-18.

 

Tolley, V. Radmilovic and U. Dahmen,”Segregation in Al₃(Sc,Zr) precipitates in Al-Sc-Zr alloys”, Scripta Materialia, 52 (2005) 621-625.

 

Di Gao, C. Carraro, V. Radmilovic, R.T. Howe, R. Maboudian, “Fracture of polycrystalline 3C-SiC films in microelectromechanical systems”, Journal of Microelectromechanical Systems, vol. 13 (2004) 972-976.

 

B. Dracup, P. Turchi, V. Radmilovic, U. Dahmen, and J.W. Morris, Jr., “Validation of Predicted Precipitate Compositions in Al-Si-Ge”, Metallurgical and Materials Transaction A, 35A (2004) 2305-2311.

 

Vidyut Gopal, Eric A. Stach, Velimir R. Radmilovic, and Ian A. Mowat, “Metal delocalization and surface decoration in direct-write nanolithography by electron beam induced deposition”, Applied Physics Letters, 85 (2004) 49-51.

 

Vidyut Gopal, Chiara Dariao, Velimir R. Radmilovic, and Sung-Ho Jin, Peidong Yang and Eric A. Stach “Rapid Prototyping of Site-specific Nanocontacts by Electron and Ion Beam Assisted Direct-write Nanolithography”, Nano Letters, 4 (2004) 2059-2063.

 

S. Bals , B. Kabius , M. Haider , V. Radmilovic and C. Kisielowski, “Annular dark field imaging in a TEM”, Solid State Communications, 130 (2004) 675-680.

 

T. Schenkel, I. W. Rangelow, R. Keller, S. J. Park, J. Nilsson, A. Persaud, V. R. Radmilovic, J. A. Liddle, P. Grabiec, J. Bokor, and D. H. Schneider, “Open questions in electronic sputtering of solids by slow highly charged ions with respect to applications in single ion implantation”, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 219–220 (2004) 200–205.

 

I. Nikolic, D. Blecic, N. Blagojevic, V. Radmilovic and K. Kovacevic, “Influence of oxalic acid on the kinetics of Al(OH)₃ growth from caustic soda solutions”, Hydrometallurgy, 74 (2004) 1-9.

 

V. Maksimovic, A. Tolley, M.T. Jovanovic and V. Radmilovic, “Aging of a commercial Al-Cu-Si based alloy modified with germanium”, Mat. Sci. Forum, 453-454 (2004) 323-328.

 

David Mitlin, Amit Misra, Velimir Radmilovic, Michael Nastasi, Richard Hoagland, David J. Embury, J. P. Hirth and Terence E. Mitchell, “Formation of Misfit Dislocations in Nano-Scale Ni-Cu Bilayer Films”, Phil. Mag. A, 84 (2004) 719-736.

 

Christopher R. Perrey, C. Barry Carter, Joseph Michael, Paul Kotula, Eric Stach, and Velimir Radmilovic, “Using the FIB to characterize nanoparticle materials”; Journal of Microscopy, the “NanoFIB” issue, 214 (2004) 222-236.

 

T. Schenkel, V. Radmilovic, E.A. Stach, S.-J. Park and A. Persaud, “Formation of a Few Nanometer Wide Holes in Membranes with a Dual Beam FIB”, Journal of Vacuum Science & Technology B (Microelectronics and Nanometer Structures), 21 (2003) 2720-3.

 

E. Stach, V. Radmilovic, D. Deshpande, A. Malshe, D. Alexander, D. Doerr, “Nanoscale defects induced by a femtosecond laser-the case of LiNbO₃”, Applied Physics Letters, 83 (2003) 4420-4422.

 

I. Nikolic, D. Blecic, N. Blagojevic, V. Radmilovic and K. Kovacevic, “Influence of oxalic acid on the agglomeration process and total soda content in precipitated Al(OH)₃”, Journal of Crystal Growth, 252 (2003) 360-366 .

 

U. Dahmen, C.J.D. Hethrington, V. Radmilovic, E. Jonson, S.Q. Xiao, C.P. Luo and K.H. Westmacott, “Electron Microscopy Observation on the Role of Twinning in the Evolution of Microstructure’, Journal of Microscopy and Microanalysis, Vol. 8 (2002) 247-256.

 

V. Radmilovic, U. Dahmen, D. Mitlin, and J.W. Morris, Jr., “The Effect of Thermal Cycling on the Size and the Shape of Si-Ge Precipitates in Aluminum”, Met. & Mater. Trans., 34 (2003) 543-551.

 

D. Mitlin, V. Radmilovic, U. Dahmen and J.W. Morris, Jr., “On the influence of Si-Ge Additions on the Aging Response of Al-Cu”, Metallurgical and Materials Transaction, 34A (2003) 735-742.

 

V. Radmilovic, U. Dahmen, B. Dracup, M.K. Miller, D. Mitlin, and J.W. Morris, “Clustering and precipitation in Al-Si-Ge and Al-Si-Ge-Cu alloys”, Materials Science Forum, vol. 396-402 (2002) 905-910.

 

V. Maksimovic, S. Zec, V. Radmilovic and M.T. Jovanovic, Jornal of Serbian Chemical Society, 68 (2003) 893-901.

 

K.I. Popov, Lj. J. Popovic, E. R. Ivanovic, V. Radmilovic and M. G. Pavlovic: “The effect of reversing current deposition on the apparent density of electrolytic copper powder”, J. Serb. Chem. Soc., vol. 67 (2002) 61-67.

 

U.A. Paulus, A. Wokaun, G.G. Scherer, T.J. Schmidt, V. Stamenkovic, V. Radmilovic, N.M. Markovic, and P.N. Ross, Oxigen Reduction on Carbon Supported Pt-Ni and Pt-Co Alloy Catalysts, Journal of Physical Chemistry, B, 106 (2002) 4181-4191.

 

C. Yanar, J.M.K. Wiezorek, V. Radmilovic and W.A. Soffa, “Massive transformation and the formation of ferromagnetic L1_o phase in Mn-Al-base alloys”, Met. & Mater. Trans., 33A (2002) 2413-2423.

 

M. G. Pavlovic, Lj. J. Popovic, E. R. Ivanovic, V. Radmilovic and K. I. Popov: “The effect of particle structure on apparent density of electrolytic copper powder”, J. Serb. Chem. Soc., vol. 66 (2001) 923-933.

 

D.Mitlin, U. Dahmen, V. Radmilovic and J.W. Morris, Jr., “Precipitation and hardening in Al–Si –Ge”, Mater. Sci. & Eng., A301 (2001) 232-238.

 

C. Yanar, V. Radmilovic, W.A. Soffa and J.M.K. Wiezorek, "Evolution of Microstructure and Defect Structure in L1_o-0rdered Manganese Aluminide Permanent Magnet Alloys”, Intermetallics, 9 (2001) 949-954.

 

V. Radmilovic, D. Mitlin, S. Hiderberger, U. Dahmen, “The use of Moiré patterns in TEM images to measure precipitate composition in Al-Si-Ge alloys”, Journal of Microscopy and Microanalysis, vol. 7 (Supplement 2), (2001) 238-239.

 

R. Kilaas and V. Radmilovic, “Structure Determination and Structure Refinement of Al₂CuMg Precipitates by Quantitative High-Resolution Electron Microscopy”, Ultramicroscopy, vol. 88 (2001) 63-72.

 

D. Mitlin, J.W. Morris, Jr., U. Dahmen, and V. Radmilovic, “Precipitation and strengthening phenomena in Al-Si-Ge and Al-Si-Ge-Cu alloys”, Journal of Advances in Techn. Mater. & Mater. Process., 2 (2000) 87-95.

 

E. Romhanji, D. Mitlin and V. Radmilovic, “Deformation Pattern and Strain Hardening in a Highly Textured 8090 Al-Li Alloy Sheet”, Journal Mater. Sci. and Eng. A, vol. A291 (2000) 160-167.

 

D. Mitlin, V. Radmilovic and J.W. Morris, JR., “Catalyzed precipitation in Al-Cu-Si”, Met. & Mat. Trans., 31A (2000) 2697-2711.

 

C. Yanar, J.M.K. Wiezorek, V. Radmilovic and W.A. Soffa, “Characterization of interphase interfaces developed during the ordering transformation (e (A3) ® t (L1₀)) in manganese-aluminum alloys”, Journal of Microscopy and Microanalysis, vol. 6 (2000) 364-365.

 

D. Mitlin, V. Radmilovic, U. Dahmen, and J.W. Morris, Jr., “Precipitation and Aging in Al- Si-Ge-Cu”, Met. & Mat. Trans. Vol. 32A(2000) 197-198.

 

V. Radmilovic, T. Richardson, S.J. Chen, and P.N. Ross, “Structure and composition of supported Pt-Sn electrocatalysts”, Proceed. 57th MSA Meeting, Springer, Portland, Journal of Microscopy and Microanalysis, vol. 5 (Supplement 2), (1999) 702-703.

 

T. Radetic, V. Radmilovic, and W.A. Soffa, “Strengthening and the Interplay of slip and twinning in copper-titanium alloy”, Inzeneria materialowa, vol. 20 (1999) 32-35.

 

E. Romhanji, M. Popovic, and V. Radmilovic, “Room temperature deformation behavior of AlMg6.5 alloy sheet”, Z. Metallkunde, vol.90 (1999) 305-310.

 

V. Radmilovic, M. Popovic, and E. Romhanji, “On serrated yielding in AlMg6.5 alloy sheet”, J. Serb. Chem. Soc., vol. 64 (1999).

 

V. Radmilovic, R. Kilaas, U. Dahmen, and G.J. Shiflet, “Structure and morphology of S-phase precipitates in aluminum”, Acta Materialia, vol. 47 (1999) 3987-3997.

 

V. Radmilovic, and K. Krishnan, “Magnetic domain wall-microstructure interfaces in low-carbon steel”, Journal of Microscopy and Microanalysis, vol. 5 (Supplement 2), (1999) 18-19.

 

V. Radmilovic, R. Kilaas, and U. Dahmen, “Structure determination of the Al₂CuMg imtermetallic phase”, Proceed. 57th MSA Meeting, Springer, Portland Journal of Microscopy and Microanalysis, vol. 5 (Supplement 2), (1999) 180-181.

 

T. Radetic, V. Radmilovic and W.A. Soffa, "Electron Microscopy Observations Of Twin-Twin Intersections in a Particle Hardened Copper-Titanium Alloy", Scripta Materialia, vol. 40 (1999) 845-852.

 

V. Radmilovic, R. Kilaas, and U. Dahmen, “Structure Determination of the Al₂CuMg Intermetallic Phase”, Microscopy & Microanalysis, vol. 5, supp. 2 (1999) 180-181.

 

V. Radmilovic, M. Popovic, and E. Romhanji, “On serrated yielding in AlMg6.5 alloy sheet”, Journal of Serbian Chemical Society, vol. 63 (1998) 823-832.

 

AT. Dimitrov, SH. Jordanov, KI. Popov, MG. Pavlovic, V. Radmilovic, “Electrodeposition of Ag from nitrate solutions: Part I. Effect of phosphate ions on morphology”, J. of Applied Electrochemistry, v28 (1998) 791-796.

 

A.Nikolic, V. Radmilovic, M. Simicic, Dj. Koruga, “Nanotubes: Basic structural and energy properties”, Materials Science Forum, Vol. 282-283 (1998) 83-92.

 

S.K. Zecevic, J.B. Zotovic, S. Lj. Gojkovic, and V. Radmilovic, “Electrochemically deposited thin films of amorphous Fe-P alloy. Part I: Chemical composition and phase structure characterization”, J. Electroanalytical Chemistry, v. 448 (1998) 245-252.

 

V. Radmilovic, K.I. Popov, M.G. Pavlovic, A.T. Dimitrov and S. Hadzi Jordanov, “The mechanism of silver granular electrodeposits formation", J. Solid State Electrochemistry, vol. 2 (1998) 162-169.

 

V.H. Crespi, N.G. Chopra, M.L. Cohen, A. Zettl, V. Radmilovic, “Site-selective radiation damage of collapsed carbon nanotubes“, Applied Physics Letters, vol.73 (1998) 2435-2357.

 

J.Y. Gu, S.B. Ogale, M. Rajeswari, T. Venkatesan, R. Ramesh, V. Radmilovic, U. Dahmen, G. Thomas, T.W. Noh, “In-plane grain boundary effects on the magnetotransport properties of La_0.7Sr_0.3MnO_3-x, Applied Physics Letters, vol.72 (1998) 1113-1115.

 

K.I. Popov, E. R. Stojilkovic, V. Radmilovic, M. G. Pavlovic, “Morphology of lead dendrites electrodeposited by square-wave pulsating overpotential”, Powder Technology, vol. 93 (1997) 55-61.

 

N. Ilic, Dj. Drobnjak, V. Radmilovic, M. Jovanovic, and D. Markovic, “Serrated yielding in Al-Li base alloys”, Scripta Materialia, vol. 34 (1996) 1123-1130.

 

K.I. Popov, M.G. Pavlovic, E.R. Stojiljkovic, and V. Radmilovic, “The silver powder electrodeposition by constant and pulsating overpotential”, J. Serb. Chem. Soc., vol. 61 (1996) 47-55.

 

V. Radmilovic, “Application of electron microscopy in studies of phase transformations and other phenomena in materials”, Advanced Materials for High Technology Applications; Materials Science Forum, Vol. 214 (1996) 21-32.

 

T. Radetic, V. Radmilovic, and W.A. Soffa, “Electron microscopy observations of deformation twinning in a precipitation hardened copper-titanium alloy”, Scripta Materialia, vol. 35 (1996) 1403-1409.

 

V. Radmilovic, H. Gasteiger, P. Ross, “Structure and chemical composition of a supported Pt-Ru electrocatalyst for methanol oxidation”, Journal of Catalysis, vol. 154 (1995) 98-106.

 

E. Romhanji and V. Radmilovic, “Effect of grain size on bonding procedure in steel/copper and steel/brass sandwiches”, Z. Metallkunde, vol. 86 (1995) 754-759.

 

S. Ratkovic, M. Djurdjevic, and V. Radmilovic, “Monte Carlo simulation of microstructure development during solidification in Al-5%Cu alloy”, J. Serb. Chem. Soc., vol. 60 (1995) 1167-1175.

 

S.K. Zecevic, J.B. Zotovic, S. Lj. Gojkovic, and V. Radmilovic, “Voltametric and Spectroscopic characterization of electrochemicaly deposited thin films of Fe-P alloys”, J. Serb. Chem. Soc., vol. 60 (1995) 827-839.

 

K.I. Popov, V. Radmilovic, B.N. Grgur, and M. G. Pavlovic, “The morphology of copper electrodeposits: Part II. The mechanisms of carrot like electrodeposits formation”, J. Serb. Chem. Soc., vol. 59 (1994) 47-52.

 

K.I. Popov, V. Radmilovic, B.N. Grgur, and M.G. Pavlovic, “The morphology of copper electrodeposits: Part III. Disperse deposits formation”, J. Serb. Chem. Soc., vol. 59 (1994) 119-125.

 

Dj. Drobnjak, P. Zivanovic, S. Vucic, V. Radmilovic, “Structure and properties of cold rolled and annealed commercial purity copper”, Materials Science Forum, Vol. 113-115 (1993) 703-708.

 

K.I. Popov, B.N. Grgur, M.G. Pavlovic, and V. Radmilovic, “The morphology of copper electrodeposits. Part I. The mechanism of copper cauliflower like electrodeposits formation”, J. Serb. Chem. Soc., vol. 58 (1993) 1055-1062.

 

S. Stevic, V. Radmilovic, Lj. Karanovic, V. Halilev, “Microstructure of As-Cast Lead Fluoroluminate Glass”, Science of Sintering, vol. 25 (1993) 199-206.

 

D.M. Drazic, S. Gojkovic, S.K. Zecevic, and V. Radmilovic, “Cathodic processes on corroding low carbon steel: the effect of the degree of deformation”, Corrosion Sci., vol. 33 (1992) 791-797.

 

D. Velimirovic, V. Radmilovic, M. Djordjevic, D. Kocovic, D. Kostic, and S. Pavlovic, “Epidural lead fracture caused by material processing fault”, PACE - pacing and clinical electrophysiology, vol. 14 (1991) 1425-1431.

 

A.G. Fox, S.C. Fuller, C.E. Whitman, and V. Radmilovic, “A powder X ray diffraction study of a solution treated and ice brine quenched Al 14.25at.% Li alloy”, Journal Mater. Res., vol. 6 (1991) 712-718.

 

J.S. Chen, V. Radmilovic, and T.M. Devine, “Comparison of the chromium concentration on grain boundaries in sensitized stainless steel measured by analytical electron microscopy and an electrochemical technique”, Corrosion Sci., vol. 30 (1990) 477-494.

 

V. Radmilovic, G. Thomas, and S.K. Das, “Microstructure of high temperature aluminum based matrix/SiC particulate composites”, Mater. Sci. and Eng. A, vol. A132 (1990) 171-179.

 

V. Radmilovic, A.G. Fox, R.M. Fisher, and G. Thomas, “Lithium depletion in precipitate free zones (PFZ's) in Al-Li base alloys”, Scripta Metallurgica., vol. 23 (1989) 75-79.

 

V. Radmilovic, G. Thomas, G.J. Shiflet, and E.A. Starke, “On the nucleation and growth of Al₂CuMg (S-phase) in Al-Li-Cu-Mg and Al-Cu-Mg alloys”, Scripta Metallurgica., vol. 23 (1989) 1141-1146.

 

V. Radmilovic, A.G. Fox, and G. Thomas, “Spinodal decomposition of Al rich Al-Li alloys”, Acta Metallurgica., vol. 37 (1989) 2385-2394.

 

V. Radmilovic, Dj. Drobnjak, and M. Jovanovic, “Serrated yielding in Nb-V dual phase steel”, Mater. Sci. and Tech., vol. 5 (1989) 908-912.

 

V. Radmilovic, G. Thomas, J. Glazer, and J.W. Morris, “The dislocation pair spacing in a binary Al-Li alloy”, Inst. of Physics, vol. 2 (1988) 467-468.

 

V. Radmilovic and G. Thomas, “Atomic resolution imaging in Al-Li-Cu alloy”, Journal de Physique, vol. 48 (C3) (1987) 385-396.

 

 

 

Papers published in international Serbian journals (in Serbian; abstract in English)

I. Nikolic, D. Blecic, N. Blagojevic, V. Radmilovic, K. Kovacevic: Fenomeni procesa kristalizacije Al(OH)₃ aluminatnih rastvora, Metalurgija, Vol 9 (2003) 245-293.

V. Maksimovic, M. Jovanovic i V. Radmilovic, “Efekti mikrolegiranja geermanijumom u modifikovanoj leguri aluminijuma tipa 2219”, Metalurgija, No. 4, vol. 8 (2002) 335-342. Zbornik radova Simpozijuma Deformacija i struktura metala, 25-26 jun, 2002, Beograd, 81-84.

V. Radmilovic, “High resolution electron microscopy of inorganic materials”, Bulletin de l'Academie Serbe des Sciences et des Arts, Classe des Sciences Mathématique et Naturelles, Sciences Naturalles, No. 37, vol. 115 (1998) 1-14.

Novovic, L. Sidjanin, P. Kovac, V. Radmilovic, “Some aspects of physics of strength, plasticity, and fracture in the cheap formation processes”, Metallurgy, vol. 2 (1996) 79-92.

V. Radmilovic, “Structure and composition of Al₃Zr intermetallic phase in aluminum alloys“ Metallurgy, vol. 1 (1995) 5-21.

Lj. Kukanjac, V. Radmilovic, Dj. Drobnjak, "Failure analysis of helicopter gear", Mining., Geology, and Metallurgy, vol. 45 (1994) 9-12.

G. Pavlovic, V. Radmilovic, A. Dekanski, E. R. Stojiljkovic, and K. I. Popov, "On the roughness of bright galvanic coatings on copper strip", Materials Protection., vol. 34 (1993) 7-13.

 

M.G. Pavlovic, V. Radmilovic, A. Dekanski, E. R. Stojiljkovic, and K. I. Popov, "The microscopic investigation of the brightness of electrodeposited metal coatings", Journal of Serbian Chemical Society, (1993) 24-29.

 

B. Bozic, N. Vidojevic, N. Novovic, and V. Radmilovic, "Some specific properties of tempered Cr-Mo-Zr low alloy steel", Glas, Classe des Sciences Techniques, l'Academie Serbe des Sciences et des Arts, Belgrade, (1992) p. 37.

D. M. Drazic, S. Gojkovic, S. K. Zecevic, and V. Radmilovic, "Effect of plastic deformation on cathode processes kinetics, significant for corrosion of low-carbon steel", Glas, Classe des Sciences Techniques, l'Academie Serbe des Sciences et des Arts, No. 365, vol. 29 (1991) 75-87.

B. Bozic, N. Vidojevic, N. Novovic-Simovic, V. Radmilovic, "The characteristics of the tempering process of high-strength low-carbon low alloyed Cr-Mo-Zr steel depending on the initial structure," Bulletin SANU, No. 25, (1989) pp.1-19.

Matijasevic, S. V. Markovic, B. Jordovic, and V. Radmilovic, "SEM quantitative metallographic analysis of porosity in high silicon cast iron", Foundry, 33 (1986) pp. 29-34.

 

M. Djordjevic, V. Radmilovic, and P. Stojanov, "Pacemaker lead fracture", Pacemaker Center, vol. 1 (1983) 1-4.

 

B. Bozic, D. Mihailovic, and V. Radmilovic, "The change of plastic strain amplitude in a total strain controlled low-cycle fatigue of an aged aluminum alloy", Bulletin de l'Academie Serbe des Sciences et des Arts, Tome LXV, Class des Sciencies Techniques, Belgrade, No. 15, vol. 65 (1979) pp. 47-53.

 

B. Bozic, D. Mihailovic, and V. Radmilovic, "The change in plasticity during low-cycle fatigue as a function aging and plastic strain amplitude of Al-Zn-Mg alloy", Glas, Classe des Sciences Techniques, l'Academie Serbe des Sciences et des Arts, No. 15, (1979) p. 61-70.

 

 

 

Papers published in the proceedings of international conferences (in English)

 

V. Radmilovic, Dj. Drobnjak, M. Rogulic, “Ductile fracture in a V/Nb Dual Phase Steel”; in: Fracture and the Role of Microstructure, 4th ECF Confer., Leoben, 1982, EMAS Publ., vol.1, 1983, pp. 322-326.

V. Radmilovic, Dj. Drobnjak, B. Djuric, “Elevated Temperature Strain Age Hardening of a V/Nb Dual Phase Steel”; in: Deformation of Multi Phase and Particle Containing Materials, Int. Conf., Roskilde, Denmark, RISØ Publ., 1984, pp. 499-502.

E. Romhanji, V. Radmilovic, V. Milenkovic, Dj. Drobnjak, “Deformation behaviour of Brass Steel Brass Sandwich Sheet Material”, in: Coating and Bimetallics for Energy Systems and Chemical Process Environments, ASM Conf. South Carolina, ASM Publ., 1985, pp. 53-60.

S. Matijasevic, S. Markovic, D. Mihajlovic, V. Radmilovic, “High silicon content castings”, BIFC, Int. Conf., Beijing International Foundry, Foundry Institution Publ., Beijing, 1986, pp. 1242-1248.

D. Manojlovic, R. Milovic, V. Radmilovic, Dj. Drobnjak, “SEM study of crack initiation and propagation in high speed steel”; in Failure Analysis Theory and Practice, 7th ECF Conf., Budapest, 1988, EMAS Publ., 1988, pp. 267-271.

G. Thomas, S. Miyasato, V. Radmilovic, “Electron Microscopy of Al-Li-Cu and Al-Li-Mg alloys; in. Al-Li alloys”, Los Angeles Chapter Publ., ASM Int. Conf., 1988. (Invited lectures).

Dj. Drobnjak, S. Vucic, V. Milenkovic, V. Radmilovic, “Abnormal annealing behaviour of commercial purity copper”; oral presentation at Recrysallization Conf. in Australia, 1990, Conf. Proceed., Recrystallization'90, ed. T. Chandra, TMS, 1990, pp. 517-522.

V. Radmilovic and G. Thomas, “Nonstoichiometry of Al-Zr intermetallic phases”, 4th Int. Conf. on: Aluminum Alloys: Their physical and mechanical properties1, Atlanta, 1994, pp. 153-160.

V. Radmilovic, “Application of electron microscopy in studies of phase transformations and other phenomena in materials”, in Advanced materials for high technology applications, ed. D. Uskokovic, Trans. Tech. Publ. Monograph Series, vol. 214 (1996), pp. 21-32.

M. Popovic, E. Romhanji, V. Radmilovic, V. Milenkovic, “Improvement of the AlMg6.5 alloy properties for forming application”, EUROMAT’97, Maastricht, 21-23 April, 1997.

J.Y. Gu, S.B. Ogale, K. Ghosh, T. Venkatesan, R. Ramesh, V. Radmilovic, U. Dahmen, G. Thomas, T.W. Noh, (Edited by: M.F. Hundley, J.H. Nickel, R. Ramesh, Y. Tokura,) “In-plane grain boundary effects on the transport properties of La_0.7Sr_0.3MnO_3-x thin films”, Science and Technology of Magnetic Oxides Symposium, Boston, MA, USA, 1-4 Dec. 1997, Warrendale, PA, USA: Mater. Res. Soc, 1998. pp. 257-62.

T. Radetic, W.A. Soffa, V. Radmilovic, ”HREM observations of mechanical twinning in Cu-Ti alloys: incoherent and coherent twin interfaces”, Boundaries and Interfaces in Materials: David A. Smith Symposium. Proceedings of the Memorial Symposium Held at the 1997 TMS Fall Meeting, Indianapolis, IN, USA, 15-18 Sept. 1997, Warrendale, PA, USA: TMS, (1998) pp.83-88.

A. Nikolic, V. Radmilovic, M. Simicic, Dj. Koruga, “Nanotubes: basic structural and energy properties”, Second Yugoslav Conference on Advanced Materials, Herceg-Novi, Yugoslavia, 15-19 Sept. 1997.

V. Radmilovic and G. Thomas, “Microstructure of High Temperature Al based Matrix/SiC Particulates Composites", in High Performance Composites for 1990’s, Ed’s., S.K. Das, C. K. Ballard, and F. Mariker, TMS Publ., Warrendale, 1991, pp. 83-92.

V. Radmilovic, D. Mihajlovic, M. Rogulic, “The development of dislocation structure during low cycle fatigue in Al-Zn-Mg alloy”, Proceed. Of the 7th EUREM, The Hague, 1980, pp. 156-157.

V. Radmilovic and Dj. Drobnjak, “A SEM Study of Tensile Fracture in Dual Phase and Multi Phase Steels”, Proceed. Of 8th EUREM, Budapest, 1984, vol. 1, pp. 793-794.

E. Romhanji, V. Radmilovic, and V. Milenkovic, “The Influence of Si Content on Structure and Strain Hardening in Cu76Zn Brass”, Proceed. Of 8th EUREM, 1984, vol. 2, pp. 879-880.

V. Radmilovic, C. Nelson, and G. Thomas, “Electron Microscopy of TMT Al-Li-Cu Alloys”; Proceed. Of the 45th EMSA Annual Meeting, 1987, pp. 605-606.

Dj. Drobnjak, S. Vucic, D. Manojlovic, and V. Radmilovic, “TEM Study of Interfaces in As Annealed Copper”; Proceed. Of III Balkan Congress on Electron Microscopy, 1989, pp. 261-262.

E. Romhanji, V. Radmilovic, and V. Milenkovic, “Microstructure development in Cu76ZnSi brass during uniaxial tension”; Proceed. Of III Balkan Congress on Electron Microscopy, 1989, pp. 263-264.

V. Radmilovic, S. Miyasato, and G. Thomas, “Subgrain boundary structure in Al-Li-Cu-Zr alloy”; Proceed. Of III Balkan Congress on Electron Microscopy, 1989, pp. 473-474.

V. Radmilovic, G. Thomas, R. Kilaas, and N.J. Kim, “HREM of a rapidly solidified Al-Li-Zr based alloys”, Proceed. of XIIth Int. Congress for Electron Microscopy, 1990, pp. 51-52.

M.A. O'Keefe and V. Radmilovic, “Extension of the "thin crystal" condition by small crystal tilts Why HREM images of SiC polytypes always look tilted”, Proceed. Of EMSA Conf., Boston, 1992, pp. 116-117.

V. Radmilovic, M.A. O'Keefe, and G. Thomas, “Imaging of SiC in metal matrix composites”, Proceed. of 10th EUREM Conf., Granada, Spain, 1992, pp. 449-450.

Dj. Drobnjak, S. Vucic, and V. Radmilovic, “Substructure in annealed commercial purity copper”, Proceed. of 10th EUREM Conf., Granada, Spain, 1992, pp. 247-248.

M.A. O'Keefe and V. Radmilovic, “The effect of small crystal tilts on dynamical scattering: Why simulated images are thinner than experimental ones”, Proceed. Of the MSA Annual Meeting, Cincinnati, 1993, pp. 980-981.

V. Radmilovic and G. Thomas, “Structure and chemical composition of nanophase particles in Mg based alloys”, Proceed. Of the MSA Annual Meeting, Cincinnati, 1993, pp. 990-991.

M.G. Pavlovic, V. Radmilovic, A. Dekanski, E.R. Stojiljkovic, and K.I. Popov, “The effects of structure and morphology of electrodeposited metals on the brightness of coatings”, 44th ISE Meeting, Berlin, 5 10. IX. 1993, p. II.4.40.

M.G. Pavlovic, V. Radmilovic, A. Dekanski, E.R. Stojiljkovic, and K. I. Popov, “The surface coarseness level determining the brightness of electrodeposeted metal coatings”, Int. Conference on "Modern Electrochemistry in Industry and for The Protection of the Environment", Krakow, Poland, 18 22.X. 1993, p. 2.6.

E.R. Stojiljkovic, V. Radmilovic, A. Dekanski, M.G. Pavlovic, K.I. Popov, “The surface coarseness of the bright metal electrodeposits”, Int. Seminar of Alloys and Composite Materials, Budva, Yugoslavia, 25 28. IX. 1994, p. P-12.

M.G. Pavlovic, B.N. Grgur, V. Radmilovic, K.I. Popov, “The morphology of copper electrodeposits”, 45th Annual Meeting of the Int. Society of electrochemistry, Porto, Portugal, 28. VIII 2.IX. 1994, p. VII-85.

M.A. O'Keefe and V. Radmilovic, "Specimen thickness derived from matching simulated HREM images are wrong", Abstracts from the 5th Conference on Frontier in Electron Microscopy in Materials Science, Berkeley, 1994, p. 50. (Invited paper)

M.A. O'Keefe and V. Radmilovic, "Specimen thickness from matching with simulated images are under estimated", International Conference on Electron Microscopy, Paris, 1994, pp.

V. Radmilovic, H. Gasteiger, P. Ross, "Structure and chemical composition of Pt-Ru nanoparticles supported on carbon black", Proceed. 52nd MSA Meeting, SF Press, San Francisco, 1994, pp. 782-783.

V. Radmilovic, R. Kilaas, and G. Thomas, “Amorphization of Al₁₀(V_x, Cr_1-x) intermetallic phase”, Proceed. 52nd MSA Meeting, SF Press, San Francisco, 1994, pp. 662-663.

V. Radmilovic and M.A. O’Keefe, “Bond relaxation on the high resolution TEM image of the beta-SiC twin interface, Proceed. Fall MRS, Boston, USA.

V. Radmilovic, M.A. O’Keefe, “Fresnel effect in high resolution TEM imaging of small particles”, Proceed. 53rd MSA Meeting, SF Press, San Francisco, 1995, pp. 590-591.

V. Radmilovic, M.A. O’Keefe, and R. Kilaas, “Application of cross correlation technique for the analysis of Fresnel effect in small particle HREM imaging”, CD-ROM, EUREM’96, Dublin, 1996, file: M/M2/Radmilov.

 

V. Radmilovic, S. Ratkovic, G.J. Shiflet, and U. Dahmen, “GPB zones as a precursor for S’ precipitation in Al based matrices”, Proceed. 54th MSA Meeting, SF Press, San Francisco, 1996, pp. 996-997.

 

M.G. Pavlovic, K.I. Popov, V. Radmilovic, A.T. Dimitrov and S. Hadzi Jordanov, “Granular silver electrodeposition", 48th Annual Meeting of the Int. Society of electrochemistry and 192^nd Meeting of The Electrochemical Soc., 1997 Joint International Meeting, Paris, August 31-September 5, 1997, p. 597.

 

V. Radmilovic, S. Ratkovic, and U. Dahmen, “Digital Moiré analysis of interface dislocation structure between S-phase (Al₂CuMg) and Al-based matrix”, Proceed. 55^th MSA Meeting, SF Press, San Francisco, 1997, pp. 665-666.

 

E.R. Stojiljkovic, K.I. Popov, V. Radmilovic, M.G. Pavlovic, "Dendritic electrocrystallization of lead", Proceed. Of 1^st International Conference of the Chemical Societies of the Southeast European Countries, Halkidiki, Greece, 1998, PO-727.

 

V. Radmilovic, "Precipitation phenomena in Al-alloys", Proceed. Of 1^st International Conference of the Chemical Societies of the Southeast European Countries, Halkidiki, Greece, 1998, p. SL20.

 

R. Etien, V. Radmilovic, and T.M. Devine, “Stress Corrosion Cracking of Thin Films of Stainless Steel”, MRS’99, Boston, (2000).

 

R. Kilaas, V. Radmilovic, and U. Dahmen, “Structure refinement of S-phase precipitates in Al-Cu-Mg alloys by quantitative HRTEM”, Advances in Materials Problem Solving with the Electron Microscopy. Symposium (Materials Research Society Symposium Proceedings Vol.589). Mater. Res. Soc. 2001, pp. 273-8. Warrendale, PA, USA.

 

C. Yanar, J.M.K. Wiezorek, V. Radmilovic and W.A. Soffa, “Transformation behavior in Mn-Al-base permanent magnet alloys: Defect structure and microstructure”, 10th International Metallurgy and Materials Congress, 24-28 May 2000, Istanbul, TURKEY.

 

V. Radmilovic, D. Mitlin, S. Hinderberger, U. Dahmen, and J.W. Morris, Jr., “Precipitation and strengthening phenomena in Al-Si-Ge and Al-Si-Ge-Cu alloys”, International Materials Research Congress, August 27-31, 2000, Cancun, Mexico (invited talk).

 

Cagatay Yanar, Jörg M.K. Wiezorek, Velimir R. Radmilovic, William A. Soffa, “Nucleation and Growth of the Ferromagnetic L1_o Phase in Manganese-Aluminum Permanent Magnet Alloys: Evolution of Micro-structure and Defect Structure”, 5th International Conference on Structural & Functional Intermetallics, July 16–19, 2000, Vancouver, British Columbia.

 

Cagatay Yanar, Jorg M.K. Wiezorek, Velimir Radmilovic and William A. Soffa, “Massive Transformation and the Formation of the Ferromagnetic t-MnAl Phase in Mn-Al Base Alloys”, TMS FALL MEETING 2000, October 8–12, 2000, St. Louis, Missouri, USA.

 

C. Yanar, V. Radmilovic, W.A. Soffa and J.M.K. Wiezorek , " Genesis of Defects in Massively Transformed L1 0-Ordered Tau-MnAl Alloys ", Influences of Interface and Dislocation Behavior on Microstructure Evolution. Symposium (Materials Research Society Symposium Proceedings Vol.652). Mater. Res. Soc. 2001, pp.Y8.3.1-6.

 

D. Mitlin, V. Radmilovic, U. Dahmen, and J.W. Morris, Jr., “The microstructure and properties of Al-Si-Ge-Cu Alloys”, THERMEC’2000, Las Vegas.

 

D. Mitlin, V. Radmilovic, U. Dahmen, and J.W. Morris, Jr., “Precipitation and Aging in Al-Si-Ge-Cu”, TMS SPRING MEETING 2001, New Orleans, Louisiana, February 11-15^th, 2001.

 

D. Mitlin, V. Radmilovic, U. Dahmen, and J.W. Morris, Jr., “The Hardness of Al-Ge-Si Ternary Alloys”, TMS SPRING MEETING 2001, New Orleans, Louisiana, February 11-15^th, 2001.

 

D. Mitlin, V. Radmilovic, U. Dahmen, and J.W. Morris, Jr., “Mechanical Strength and Thermal Stability in Al-Si-Ge-Cu Alloys”, TMS SPRING MEETING 2001, New Orleans, Louisiana, February 11-15^th, 2001.

 

D. Mitlin, V. Radmilovic, U. Dahmen and J.W. Morris, Jr., The Microstructure and Properties of

Al-Cu-Ge-Si Alloys, Advances in the Metallurgy of Aluminum Alloys, M. Turyakioglu, ed., ASM, Metals Park, 2001, p. 239-242.

 

Jorg M.K. Wiezorek, Cagatay Yanar, Velimir Radmilovic and William A. Soffa, “Evolution of Microstructure and Defect Structure in Massively Transformed L1₀-ordered Manganese Aluminide Alloys”, TMS SPRING MEETING 2001, New Orleans, Louisiana, February 11-15^th, 2001.

 

T.J. Schmidt, N.M. Markovic, V. Stamenkovic, M. Arnez, V. Radmilovic, and P.N. Ross, Oxigen Reduction in Alcaline Solutions, Gordon Research Conference on Fuel Cells, July 2001, Rhode Island, USA.

 

V. Stamenkovic, T.J. Schmidt, U.A. Paulus, V. Radmilovic, N.M. Markovic, and P.N. Ross, Oxigen Reduction Reaction on Pt and Pt Bimetallic Surfaces, Joint International ECS Meeting 2001, San Francisco, USA.

 

U. Dahmen, C.J.D. Hethrington, V. Radmilovic, E. Jonson, S.Q. Xiao, and C.P., “TEM Observation on the Role of Twinning in the Evolution of Microstructures”, ICEM-15, Durban 2002, PP. 131-132.

 

Cagatay Yanar, Eric A. Stach, Velimir Radmilovic, William A. Soffa, and Jorg M.K. Wiezorek, “Evolution of microstructure and defect structure in ferromagnetic manganese-aluminium base intermetallics”, ICEM-15, Durban 2002, PP. 679-680.

 

V. Radmilovic, U. Dahmen, B. Dracup, P. Turchi and J.W. Morris, “TEM and CALPHAD assisted aluminum alloy design”, ICEM-15, Durban 2002, PP. 659-660.

 

V. Radmilovic, N.M. Markovic and P.N. Ross, “Structure-property relations in Pt-Mo electrocatalysts”, ICEM-15, Durban 2002, PP. 347-348.

 

William A. Soffa, Cagatay Yanar, Eric A. Stach, Velimir Radmilovic, Jorg M.K. Wiezorek, “Mechanisms of Twinning in the Ferromagnetic Phase in Manganese-Aluminum Alloys”, October 6-10, 2002 TMS FALL MEETING 2002 · Columbus, Ohio.

 

William A. Soffa, Cagatay Yanar, Velimir Radmilovic, Eric A. Stach, Jorg M.K. Wiezorek, “Diffusional and Displacive Modes of Transformation in the Formation of the Tau-Phase in Ferromagnetic Manganese-Aluminum Alloys”, October 6-10, 2002 TMS FALL MEETING 2002 · Columbus, Ohio.

 

 

V. Radmilovic,^. Di Gao, R. Maboudian, and U. Dahmen, “Growth Mechanism of (111)-Textured 3C-SiC Films on Si(100) Substrates”, MSA’2003, San Antonio, pp. 664-665CD.

 

E.A. Stach, V.R. Radmilovic, D. Deshpande, A. Malshe, D. Alexander, and D. Doerr, “FIB-TEM Characterization of Surface and Sub-Surface Defects Induced Into Lithium Niobate by a Femtosecond Laser”, MSA’2003, San Antonio, pp. 876-877CD.

 

V. Gopal, E.A. Stach, and V. R. Radmilovic, “Deposition of metallic nanowires by electron- and ion-beam assisted decomposition”, “Radiation Effects and Ion Beam Processing of Materials”, Fall 2003 Materials Research Society Meeting, December 2003, Boston, MA.

 

T. Schenkel, E. A. Stach, V. Radmilovic, S.-J. Park, and A. Persaud, “Formation of a few nanometer wide holes in membranes with a dual beam FIB”, EIPBN 2003, 47^th International Conf. on electron, ion, proton beam technology and nanofabrication, Tempa 2003.

 

Tomutsa, L. and V. Radmilovic, “Focussed ion beam assisted three-dimensional rock imaging at submicron scale”, Proceedings of the 2003 International Symposium of the Society of Core Analysts, Pau, France, September 21-24, 2003.

 

V. Maksimovic, S. Zec, M.T. Jovanovic and V. Radmilovic, “Aging of a commercial Al-Cu-Si based alloy modified with germanium “, Proc. YUCOMAT 2003.

 

David Mitlin; Amit Misra; Michael Nastasi; Velimir Radmilovic; Richard Hoagland; David J. Embury; J. P. Hirth; Terence E. Mitchell, “Formation of Misfit Dislocations in Nano-Scale Ni-Cu Bilayer Films”, TMS, Spring Conference 2004, Charlotte, NC.

 

S.-J. Park, V. R. Radmilovic, E. A. Stach, A. Persaud, J. Nilsson, and T. Schenkel, “Formation and characterization of nanopores”, submitted to the AVS Nanoscience and Bionanoscience Research Meeting, June 11^th, 2003, Berkeley, CA.

 

A. Tolley, V. Radmilovic and U. Dahmen, “Solute segregation in Al₃(Sc,Zr) intermetallic phase in Al-rich alloys”, European Congress on Electron Microscopy-ECM 2004, Antwerp, 2004, pp.

 

V. Radmilovic, “Ultra-hard nanostructured Al-Si thin films”, Sixth Yugoslav Materials Research Society Conference, “YUCOMAT 2004”, Herceg-Novi, September 13-17, 2004. (Invited plenary lectures).

 

A. Tolley, V. Radmilovic and U. Dahmen, “TEM Analysis of Grain Boundary Precipitate-Free-Zones (PFZs) in AlCuSiGe Alloy”, Microsc Microanal 10 (Suppl 2), 2004, pp. 313-314.

 

S. Bals, V. Radmilovic and C. Kisielowski, “TEM Annular Objective Apertures Fabricated by FIB”, Microsc Microanal 10 (Suppl 2), 2004, pp. 1148-1149.

 

E.A. Stach,V. Gopal, M. Jin, D.H. Alsem, M.J. Williamson, A. Minor, V. Radmilovic, C.L Muhlstein, J.W. Morris, Jr., and R.O. Ritchie, “Using the electron microscope to explore reliability in microelectromechanical systems and nanostructured materials”, Microscopy & Microanalysis, 10 (Suppl 2), 2004, pp. 354-355.

 

J.R. Jinschek, V. Radmilovic, Ch. Kisielowski, “FIB Preparation for HRTEM: GaN Based Devices”, Microsc Microanal 10 (Suppl 2), 2004, pp. 1142-1143.

 

J.R. Jinschek, K.J. Batenburg, H.A. Calderon, D. Van Dyck, F-R. Chen, C. Kisielowski, V. Radmilovic, " Prospects for Bright Field and Dark Field Electron Tomography on a Discrete Grid, (invited paper), Microscopy and Microanalysis Vol.10 (Suppl.3) 44-45 (2004).

 

J.R. Jinschek, K.J. Batenburg, H.A. Calderon, D. Van Dyck, F-R. Chen, V. Radmilovic, C. Kisielowski, "Prospects for Bright Field and Dark Field Electron Tomography on a Discrete Grid, (invited talk), Focused Interest Group (FIG) meeting: Materials Research in an Aberration-free Environment, Microscopy & Microanalysis 2004, Savannah, Ga., Aug. 2004.

 

A. M. Minor, F. Allen, V.R. Radmilovic, E.A. Stach and T. Schenkel, “Nanoscale holes formed by in situ thin film deposition in a FIB”, Microsc. and Microanal., 10 (Suppl 2), 2004, pp. 1118-1119.

 

Vidyut Gopal, Eric A. Stach, and Velimir R. Radmilovic, “Additive Nanopatterning by Platinum Deposition in a Dual Beam FIB”, Microsc Microanal 10 (Suppl 2), 2004, pp. 1120-1121.

 

D. Mitlin, A. Misra, V. Radmilovic, R.G. Hoagland, M. Nastasi, H. Kung and J.P. Hirth, “Analysis of Misfit Dislocations in Epitaxial Ni-Cu Bilayers”, TMS Annual Meeting, 2003, San Diego, CA.

 

J.T. Robinson, A. Minor, V. Radmilovic, J.A. Liddle, and O.D. Dubon, "Ordering and Morphological Evolution of Ge Islands on Metal Patterned Si," 16th American Conference on Crystal Growth and Epitaxy, Big Sky, Montana, July 12, 2005.

 

J.T. Robinson, A. Minor, V. Radmilovic, D. Walko, J.A. Liddle, and O.D. Dubón, “Metal Mediated Assembly of Ge island arrays using Au patterned Si”, APS March Meeting, Los Angeles, CA 2005.

 

J.T. Robinson, J.A. Liddle, A.M. Minor, V. Radmilovic, O.D. Dubon, “Directed assembly of Ge islands grown on Au-patterned Si(100)”, AIP, Proceedings of the 27th International Conference on the Physics of Semiconductors, eds. J. Menendez and C.G. Van de Walle (Springer, New York 2005), pp. 609-610.

 

J.T. Robinson, A. Minor, V. Radmilovic, J.A. Liddle, and O.D. Dubón, “Directed assembly of Ge islands on Au-patterned Si”, MRS, Boston, MA, 2004.

 

J.T. Robinson, J.A. Liddle, A. Minor, V. Radmilovic and O.D. Dubon, “Directed assembly of Ge islands grown on Au patterned Si(100)”, APS March Meeting, Montreal, Canada. 2004.

 

J.T. Robinson, J.A. Liddle, A.M. Minor, V. Radmilovic, and O.D. Dubon, "Directed assembly of Ge islands grown on Au-patterned Si(100)," Proceedings of 27th International Conference on the Physics of Semiconductors, Flagstaff, AZ July 26-30, 2004, 609-10.

 

D. Mitlin, V. Radmilovic, U. Dahmen, and J.W. Morris, Jr., “Al-Cu-Si-Ge: A New High Strength Aluminum Alloy”, TMS Annual Meeting, 2003, San Diego, CA.

 

Yash V. Bhargava, Shawn A. Thorne, Todd S. Mintz, Tzipi Cohen Hyams, Velimir Radmilovic, Yuri Suzuki, Thomas M. Devine, “Synthesis of Magnetic Self-Assembled Nickel-Rich Oxide Nanowires using a Novel Electrochemical Process”, S7.4.1 Mater. Res. Soc. Symp. Proc. Vol. 877E © 2005 Materials Research Society, pp. S.7.4.1-S7.4.6.

 

Shawn A. Thorne, Yash V. Bhargava, Todd S. Mintz, Velimir Radmilovic, Yuri Suzuki, Thomas M. Devine, “Novel method for the electrochemical synthesis of nickel-rich oxide nanowires”, 2005 NSTI Nanotechnology Conference and Trade Show. NSTI Nanotech 2005. Nano Science and Technology Institute. Part vol.2, 2005, pp. 630-3. Cambridge, MA, USA.

 

Arnaud Grosjean, Olivier Sanseau, Velimir Radmilovic, Alain Thorel, “Reactivity and diffusion between La_0.8Sr_0.2MnO₃ and ZrO₂ at interfaces in sofc cores by tem analysis on fib samples tape-casting”, International Conference on Solid State Ionics, Baden-Baden July 17-22, 2005.

 

V. Radmilovic, D. Mitlin, U. Dahmen, Nano-Structured Ultra-Hard Al-Si Films Displaying Elevated Temperature Stability, TMS Annual Meeting, 2005, San Francisco, CA. (Invited talk)

 

D. Mitlin, C. Ophus, V. Radmilovic, T.J. Richardson and U. Dahmen, “Ultra-Hard Al-Si Nanocomposites Synthesized by High-rate Co-evaporation”, AVS 52nd International Symposium and Exhibition, Boston, October 30-November 4, 2005, Boston, USA.

 

William Soffa, Jorg Wiezorek, Cagatay Yanar and Velimir Radmilovic, "Hybrid diffusional-displacive transformation in manganese-aluminum-base alloys"", Solid-Solid Phase Transformations in Inorganic Materials 2005, Phoenix, Arizona (Invited talk).

 

V. Radmilovic, “(111) fiber texture formation in 3C-SiC films deposited on (100) Si substrate”, European Ceramic Society Conference, Portoroz, Slovenia, June 17-24, 2005. (Invited talk)

 

 

David Mitlin, Tsung-Yu Pan, Michael L. Santella, Zhili Feng and Velimir Radmilovic, “The Effect of Spot Friction Welding (SFW) Parameters on the Strength and the Microstructure of Aluminum 6111-T4 Lap Joints”, TMS Annual Meeting, 2005, San Francisco, CA. (Invited talk)

 

Jorg M. K. Wiezorek, Cagatay Yanar, Eric Stach, Velemir Radmilovic and William Soffa, “Observation of a Hybrid Displacive-Diffusional Ordering Phase Transformation Mode in Near Equiatomic MnAl Alloys during in-situ TEM Heating Studies”, Mater. Res. Soc. Symp., 2005, Boston, USA.

 

Cagatay Yanar, Eric Stach, Velemir Radmilovic, William Soffa and Jorg M. K. Wiezorek, “In-situ Observations of Twin Formation Modes in L1₀-Ordered Intermetallic MnAl”, Mater. Res. Soc. Symp., 2005, Boston, USA.

 

J. R. Jinschek, H. A. Calderon, K. J. Batenburg V. Radmilovic and Ch. Kisielowski, “Discrete Tomography of Ga and InGa Particles from HREM Image Simulation and Exit Wave Reconstruction”, Mater. Res. Soc. Symp. Proc. Vol. 839 (2005) P451-P455.

 

J. R. Jinschek, H. A. Calderon, K. J. Batenburg V. Radmilovic and Ch. Kisielowski, “Discrete tomography of Ga and InGa particles from HREM image simulation and exit wave reconstruction”, Electron Microscopy of Molecular and Atom-Scale Mechanical Behavior, Chemistry and Structure. Symposium. Materials Research Society. 2005, pp.99-104. Warrendale, PA, USA.

 

J.M.K. Wiezorek, C. Yanar, E.A. Stach, V. Radmilovic and W.A. Soffa, “Hybrid displacive-diffusional transformation in manganese-aluminum base alloys”, Solid-solid phase transformations in Inorganic materials 2005, Edited by: J.M. Howe, D.E. Laughlin, J.K. Lee, U. Dahmen, and W.A. Soffa, TMS, 2005, pp. 523-528.

 

D. Mitlin, V. Radmilovic, U. Dahmen, “Overcoming the Solubility Problem Through High-Rate Co-Evaporation of Al-Si” Solid-solid phase transformations in Inorganic materials 2005, Pointe Hilton Resort at Squaw Peak, Phoenix, May 29-June 3, 2005. (Invited talk).

 

A. Tolley, V. Radmilovic and U. Dahmen, “Coarsening kinetics in Al-Sc-Zr alloys”, Solid-solid phase transformations in Inorganic materials 2005, Edited by: J.M. Howe, D.E. Laughlin, J.K. Lee, U. Dahmen, and W.A. Soffa, TMS, 2005, pp. 785-790.

 

V. Radmilovic, “(111) fiber texture formation in 3C-SiC films deposited on Si(001) substrates”, IX Conference of the European Ceramic Society, 19-23 June, 2005, Portoroz, Slovenia. (Invited talk).

 

P. Denes, JM Bussat, H. von der Lippe, V. Radmilovic, “High-Speed, High-DQE Detectors For Electron Microscopy”, Microsc Microanal 11(Suppl 2), 2005, pp. 1482-83. (Invited talk).

 

V. Radmilovic, A. Tolley and U. Dahmen, “HREM and HAADF Imaging of Al₃(Sc,Zr) Core/Shell Structure”, Microsc. & Microanal., 11 (Suppl 2) 2005, pp. 1712-13.

 

Vesna Maksimovic, Zorica Cvijovic, Velimir Radmilovic, “Microstructural Characterization of Modified Commercial 2219 Aluminum Alloy”, International Conference on Deformation Processing and Structure of Materials, 26-28 May, 2005, Belgrade, Serbia and Montenegro.

 

V. Radmilovic, A. Tolley and U. Dahmen, “The effect of Zr on Structure, Composition, and Precipitatation Kinetics of Al₃(Sc, Zr) Phase in Al Rich Alloys”, European Congress on Advanced Materials and Processes, EUROMAT 2005, 5-8 September, 2005, Prague, Czech Republic.

 

V. Radmilovic, “Core-shell structures in a precipitate-hardened Al-Sc-Zr alloys”, Seventh Yugoslav Materials Research Society Conference, “YUCOMAT 2005”, Herceg-Novi, September 12-16, 2005. (Invited plenary lectures).

 

Mitra L. Taheri, Eric Stach, Velimir Radmilovic, Hasso Weiland and Anthony D. Rollett, “The Impact of Length and Time Scale Limitations on Solute Drag Theory During Experiment and Modelling of Recrystallization in Aluminum Alloys”, MRS Spring Meeting, San Francisco, 2005.

 

M.L. Taheri, E. Stach, V. Radmilovic, H. Weiland, A.D. Rollett, “In-situ electron microscopy studies of the effect of solute segregation on grain boundary anisotropy and mobility in an Al-Zr alloy”, Electron Microscopy of Molecular and Atom-Scale Mechanical Behavior, Chemistry and Structure. Symposium. Materials Research Society. 2005, pp.187-93. Warrendale, PA, USA.

 

E.A. Stach, D. Ge, M. Jin, A. Minor, J.W. Morris, Jr., V. Gopal, and V. Radmilovic, “Thin Films Stresses and Mechanical Properties XI”, Spring 2005 MRS meeting, April 2005.

 

C. Ophus, D. Mitlin, V. Radmilovic, S. Evoy, L. Fischer, and U. Dahmen, “Aluminum-Molybdenum Nanocomposites for MEMS and NEMS Applications”, AVS, Fall 2005.

 

A. Tolley, V. Radmilovic, U. Dahmen, “On the Effect of Zr on Precipitate Evolution in Al-Sc-Zr alloys”, Anales Jornadas CONAMET / SAM 2004, 571-574, 2004.

 

A. Tolley, V. Radmilovic, U. Dahmen, “Evolución de la microestructura en aleaciones de Al-Cu-Si-Ge y su relación con las propiedades mecánicas” (Evolution of microstructure in Al-Cu-Si-Ge alloys and its relation to mechanical properties); Oral presentation at: First workshop on Mechanical Properties, Tandil, Argentina, 27-29 April 2005.

 

J. T. McKeown, J. D. Sugar, V. Radmilovic, A. M. Glaeser, and R. Gronsky, “Spinodal Decomposition of Geometrically Constrained CuNiFe Thin Films”, Microscopy and Microanalysis 2006, Chicago.

 

Erdmann Spiecker, Velimir Radmilovic and Ulrich Dahmen, „Novel Double-Wedge Technique for Quantitative Analysis of 3-D Structure in Thin Films”, International Microscopy Conference, IMC16, Sapporo, Japan, 2006. (Invited talk)

 

Velimir Radmilovic, Michael K. Miller, David Mitlin and Ulrich Dahmen, “Elastic-Strain Induced Cluster Formation in Al-Si-Ge Alloys”, IFES06, Guilin, China July 17-20, 2006.

 

Joshua D. Sugar, Joseph T. McKeown, Velimir Radmilovic, R. Ramesh, Andreas M. Glaeser, & Ronald Gronsky, “A Novel Approach to Model Studies of Volumetrically Constrained Spinodal Decomposition”, MS&T meeting Oct 15-19, Cincinnati.

 

Reza Mohammadi, Colin Ophus, Larry Kostiuk, Stephane Evoy, Ken Westra, Lee M. Fischer, Yongliang Wang, ZongHoon Lee, Velimir Radmilovic, Ulrich Dahmen and David Mitlin, “Gas-Sensor Cantilevers Synthesized from Ni-V-Zr Nanocomposites”, MRS 2006, Spring meeting, San Francisco.

 

Nathaniel Nelson-Fitzpatrick, Colin Ophus, Yongliang Wang, David Mitlin, ZongHoon Lee, Velimir Radmilovic, Ulrich Dahmen and Stephane Evoy, “Fabrication and Characterization of Ultra Thin Resonant Nanocantilevers in Aluminium-Molybdenum Composites”, MRS 2006, Spring meeting, San Francisco.

 

Thomas M Devine, Yash Bhargava, Shawn Thorne, Velimir Radmilovic, “Synthesis, Structure and Properties of NiO Nanowires”, The Materials Science & Technology, MS&T’06, October 15-19, Cinncinati (Invited talk)

 

N. Nelson-Fitzpatrick, L.M. Fischer, S. Evoy, C. Ophus, Y. Wang, D. Mitlin, Z-H. Lee, V. Radmilovic and U. Dahmen, “Fabrication and Characterization of Ultra Thin Resonant Nanocantilevers in Aluminium-Molybdenum Composites”, Modeling and Simulation of Microsystems, An Interdisciplinary Integrative Forum on Modeling, Simulation and Scientific Computing in the MEMS, Microelectronic, Semiconductor, Sensors, Materials and Biotechnology fields.,May 7 - 11, 2006, Boston, Massachusetts.

 

D. Bronfenbrenner, V. Radmilovic, S. McHugo, A. Pelton and R. Gronsky, “Characterization of As-Deposited Crystalline Thin Film NiTi”, The International Conference on Shape Memory and Superelastic Technologies, May 7-11, 2006, Asilomar Conference Grounds, Pacific Grove, California USA.

 

V. Radmilovic, M. Law, P. Yang, A. Radenovic and C. E. Nelson, “EFTEM Imaging of ZnO-TiO2 Core-Shell Nanowires and TiO2 Nanotubes”, Microsc Microanal 12(Supp 2), 2006, pp. 474-475 CD.

 

J. T. McKeown, J. D. Sugar, V. Radmilovic, A. M. Glaeser, and R. Gronsky, “Spinodal Decomposition of Geometrically Constrained CuNiFe Thin Films”, Microsc Microanal 12(Supp 2), 2006, pp. 522-523 CD.

 

D. Bronfenbrenner, V. Radmilovic, S. McHugo, R. Gronsky, “Characterization of As-Deposited Crystalline NiTi Thin Films”, Microscopy and Microanalysis, vol. 12 (Supp 2), 2006, pp. 708-709 CD.

 

J.R. Jinschek, K.J. Bathenburg, H.A.Calderon, R. Kilaas, V. Radmolivic, and C. Kisielowski, “Atomic Resolution Electron Tomography Based on Discrete Mathematics”, Microsc Microanal 12(Supp 2), 2006, pp. 1566-1567 CD.

 

V. Radmilovic, “Core-shell structures and precipitation kinetics of Al₃(Sc,Zr) L1₂ intermetallic phase in al-rich alloy, 4th Balkan Conference on Metallurgy, Zlatibor, September 27-29, 2006, Zlatibor, Serbia. (Invited plenary lecture)

 

V. Radmilovic, “(111) Fiber Texture Formation in 3C-SiC Films on Si(100) Substrates”, ICSFS-13, 6-10 November, 2006, Bariloche, Argentina. (Invited talk)

 

V. Radmilovic, Z. Lee, C. Ophus, L.M. Fischer, N. Nelson-Fitzpatrick, K.L. Westra, S. Evoy, U. Dahmen, and D. Mitlin, “Ultra-hard Nanostructured Al-Mo Thin Films for NEMS Application”, Aluminum 2006 Int. Conference, September 19-22, Essen, Germany.

 

Joseph T McKeown, Joshua Sugar, Velimir Radmilovic, Andreas M Glaeser and Ronald Gronsky, “Effects of Ceramic-Metal Interface Structure and Energetics on Phase Patterning by Constrained Spinodal Decomposition”, MRS Spring Meeting, San Francisco, April 9-13, 2007.

 

David Mitlin, Chris Gilkison, Kenneth Bosnick, Colin Ophus, Christopher Harrower, Reza Mohammadi, Ken Westra, Zonghoon Lee, Ulrich Dahmen and Velimir Radmilovic, “Hydrogen Detection using NEMS Devices Fabricated from Tunable Microstructure Pd-Ta Nanocomposites”, MRS Spring Meeting, San Francisco, April 9-13, 2007.

 

N. Nelson-Fitzpatrick, C. Ophus, E. Luber, L. Gervais, D. Mitlin, Z. Lee, V. Radmilovic, U. Dahmen and S. Evoy, “Gold-Tantalum Nanocomposite as Structural Material for Resonant NEMS Biosensing Cantilevers”, MRS Spring Meeting, San Francisco, April 9-13, 2007.

 

David Mitlin, Colin Ophus, Zonghoon Lee, Ken Westra, Reza Mohammadi, Erik Luber, Brian Olsen, Ulrich Dahmen and Velimir Radmilovic, “Integrated AFM Cantilevers-tips Synthesized From Metal Nanocomposites”, MRS Spring Meeting, San Francisco, April 9-13, 2007.

 

Velimir Radmilovic, Zonghoon Lee, Colin Ophus, Reza Mohammadi, Erik Luber, Nathan Nelson-Fitzpatrick, Stephane Evoy, Ken Westra, Brian Olsen, Chris Holt, Ulrich Dahmen and David Mitlin, “Fabrication and Testing of NEMS Components Made From Nanocomposite Ni-Mo and Al-Mo Films”, MRS Spring Meeting, San Francisco, April 9-13, 2007.

 

David Mitlin, Julian Haagsma, Erik Luber, Colin Ophus, Reza Mohammadi, Zonghoon Lee, Ulrich Dahmen and Velimir Radmilovic, “Hydrogen Sorption Properties and the Microstructure of the Mg-Al-X System”, MRS Spring Meeting, San Francisco, April 9-13, 2007.

 

A. Dato, V. Radmilovic, Z. Lee, J. Phillips, M. Frenklach, “Nanocarbon Synthesis in an Atmospheric-Pressure Microwave Plasma Reactor”, 5th WSS/CI US Combustion Meeting (March, 2007)

 

M.V. Brougham, C. Ophus, S. Melenchuk, J. Luo, E. Luber, M. Danaie, F. Forbes, V. Radmilovic, Z. Lee, D. Mitlin, “Multifunctional Ultracomposites: Piezoelectric Materials Grown on Binary Metallic Glasses”, MRS 2007, Fall meeting, Boston, November 6-30, 2007.

 

.J.T. McKeown, J.D. Sugar, V. Radmilovic, A.M. Glaeser, R. Gronsky, “Alloy Phase Patterning by Constrained Spinodal Decomposition”, MRS 2007, Fall meeting, Boston, November 6-30, 2007.

 

D. Mitlin, J. Haagsma, M. Danaie, B. Shalchi, E. Luber, C. Ophus, H. Fritzsche, V. Radmilovic, U. Dahmen, “Hydrogen Sorption Properties and the Microstructure of Mg-Al Alloys and of MgH2 - Carbon Nanotube Composites”, Fall meeting, Boston, November 6-30, 2007.

 

M.D. Rossell, R. Erni, A. Tolley, E.A. Marquis, V. Radmilovic, and U. Dahmen, “The Atomic Structure of Core-Shell Precipitates in Al-Li-Sc-Zr Alloys by Analytical and Aberration-Corrected Transmission Electron Microscopy”, M&M 2008, Albaquerque, New Mexico.

 

Z. Lee, A. Dato, J. Phillips, M. Frenklach, and V. Radmilovic, “STEM Parallel Beam Nano-diffraction of Graphene”, M&M 2008, Albaquerque, New Mexico.

 

Susan Habas, Hyunjoo Lee, Velimir Radmilovic, Gabor A. Somorjai, Taleb Mokari and Peidong Yang, “Shape Control and Selectivity of Multi-Material Heterostructures for Catalytic and Energy Applications”, MRS Spring Meeting, San Francisco, 2008.

 

V. Radmilovic, M.D. Rossell, A. Tolley, E.A. Marquis, R. Erni and U. Dahmen, “Core/Shell Precipitates in Al-Li-Sc-Zr Alloys”, EMC 2008, 14th European Microscopy Congress, Aachen, September 1 - 5, 2008, Germany.

 

U. Dahmen, M.D. Rossell, R. Erni and V. Radmilovic, “Aberration-Corrected Electron Microscopy of Li-Rich Precipitates in Al-Li-Sc-Zr Alloys – Some Initial Results from the TEAM 0.5 Microscope”, AMTC Conference , Japan (2008), Invited talk.

 

V. Radmilović, M.D. Rossell, R. Erni and U. Dahmen, “Monodispersed Al₃(LiScZr) core/shell nanostructuresembedded in Al rich matrices”, Yucomat 2008, Herceg Novi, Montenegro, Invited talk.

 

V. Radmilovic, M.D. Rossell, A. Tolley, E.A. Marquis, R. Erni and U. Dahmen, “L1₂ core/shell nanostructures embedded in solids”, EM’08 International Conference, Zakopane, Poland (2008). Invited talk.

Poster presentations

 

Velimir Radmilovic, Alfredo Tolley, Emmauelle Marquis, Marta D. Rossell, Zonghoon Lee and Ulrich Dahmen, “Al₃(LiScZr) Core/double-shell Precipitates in Al Rich Alloys”, MRS Spring Meeting, San Francisco, 2008.

 

M.K. Santala, V.R. Radmilovic, A.M. Glaeser and R. Gronsky, "Orientation relationships and morphology of platinum precipitates in sapphire", 108th Gordon Conference in Solid State Studies of Ceramics, Andover, NH, August 2007.

 

J.T. Robinson, D.A. Walko, D.A. Arms, J.A. Liddle, A. Minor, V. Radmilovic, and O.D. Dubon, “Metal-mediated assembly of Ge island arrays on Si”, Advanced Photon Source Users Meeting, Argonne, IL 2005.

 

J.T. Robinson, J.A. Liddle, A. Minor, V. Radmilovic, and O.D. Dubon, “Metalmediated assembly of Ge island arrays on Si”, Berkeley Nanotechnology Forum, Berkeley, CA 2005.

 

J.T. Robinson, J.A. Liddle, A. Minor, V. Radmilovic, and O.D. Dubon, “Directed assembly of Ge islands grown on Au patterned Si(100)”, Berkeley Nanotechnology Forum, Berkeley, CA 2004.

 

J.M.K. Wiezorek, W.A. Soffa, C. Yanar, E.A. Stach and V.R. Radmilovic, “Octahedral twins in L1o-ordered manganese-aluminum intermetallics”; Integrative and Interdisciplinary Aspects of Intermetallics, Fall 2004 Materials Research Society Meeting.

 

V. Gopal, E.A. Stach, and V.R. Radmilovic, “A comparison of focused ion beam and electron beam induced deposition of conductive platinum nanowires”, Frontiers of Electron Microscopy in Materials Science, Berkeley, CA, October 2003.

 

J.M.K. Wiezorek, W.A. Soffa, C. Yanar, V.R. Radmilovic, E. A. Stach, “The formation of twins and defect structures in the ferromagnetic L1O-ordered manganese-aluminides”; Materials Research Society Meeting, Boston, MA, December 2002.

 

 

Papers published in the proceedings of Serbian national conferences (in Serbian)

 

S. Tadic, M. Jovanovic, and V. Radmilovic, Deformation behavior of Al-Li-X alloys", Proceed. Int. Conf. PLOD-89 (Society for plasticity and plastic deformation), Herceg Novi, (1989), pp. 81-89.

 

V. Radmilovic, D. Kosanin, and Dj. Drobnjak, "Deformation behavior of room-temperature aged dual-phase steels", Proceed. Int. Conf. PLOD-86, Herceg Novi, (1986), p. 226-234.

 

V. Radmilovic, G. Shiflet, and G. Thomas, The role of vacancies during precipitation of S-phase in Al-Cu-Mg and Al-Li-Cu-Mg alloys", Proceed. Conf. YUSTOM-89 (Yugoslav Society for Heat and Surface Treatment), Vrnjacka Banja, (1989), p. 63-69.

 

V. Radmilovic, E. Romhanji, V. Milenkovic, and D. Nenadic, "Effect of processing parameters on brass formability", Proceed. Int. Conf. PLOD-80, Herceg Novi, (1980), p. 184.

 

Dj. Drobnjak, V. Radmilovic, D. Tirnanic and D. Popovic, "The properties of control rolled Nb and Nb/V high strength low alloy steels", Proceed. Int. Conf. PLOD-82, Herceg Novi, (1982), p. 77.

 

V. Radmilovic, Dj. Drobnjak, and B. Djuric, "Deformation behavior of dual-phase steels at elevated temperature", Proceed. Int. Conf. PLOD-82, Herceg Novi, (1982), p. 279.

 

V. Radmilovic, E. Romhanji, and Dj. Drobnjak, "Deformation behavior of dual-phase steel during dynamical strain aging", Proceed. Int. Conf. PLOD-84, Herceg Novi, (1984), p. 186.

 

E. Romhanji, V. Radmilovic, Dj. Drobnjak, and V. Milenkovic, "Deformation behavior of multilayer brass-steel-brass material", Proceed. Int. Conf. PLOD-84, Herceg Novi, (1984), pp. 316.

 

Lj. Kukanjac, V. Radmilovic, and Dj. Drobnjak, "Failure analysis of helicopter gear", Proceed. of Yugoslav metallurgical symposium, JSM'92, Belgrade, (1992), pp. 342-345.

 

T. Radetic and V. Radmilovic, "Modeling of deformation hardening of alloys containing ordered particles", Proceed. of Yugoslav metallurgical symposium, JSM'92, Belgrade, (1992), pp. 414-418.

 

P. Zivanovic, Dj. Drobnjak, S. Vucic, and V. Radmilovic, "Effect of texture on deformation behavior low-phosphorous copper", Proceed. of Yugoslav metallurgical symposium, JSM'92, Belgrade, (1992), p. 426-429.

 

V. Radmilovic, "Metal matrix composites" (invited), Proceed. of Yugoslav metallurgical symposium, JSM'92, Belgrade, (1992), p. 621-625.

 

V. Radmilovic, J. Glazer, J. W. Morris, and G. Thomas, The significance of d' size/superdislocation spacing ratio in Al-Li based alloys", Proceed. Symp. JSM-IV (Yugoslav Symposium on Metallurgy), Belgrade, (1987), p. 435.

 

Z. Odanovic, D. Tirnanic, V. Radmilovic, and Dj. Drobnjak, "Mechanical properties and transformation characteristics of V/Nb dual-phase steel", Proceed. Conf. XXV ETAN, Mostar (Bosnia & Herzegovina), vol. 1, (1981), p. 753.

 

V. Radmilovic, Dj. Drobnjak, M. Jovanovic, "Serrated yielding of V/Nb dual-phase steel", Proceed. Conf. XXVII ETAN, Struga (Macedonia), (1983), p. 121.

 

V. Radmilovic, Dj. Drobnjak, M. Jovanovic, "Apparent activation energy for serrated yielding of V/Nb dual-phase steel", Proceed. Symp. JSM-III, (Yugoslav Symposium on Metallurgy), Belgrade, (1984), p. 681.

 

V. Radmilovic, Dj. Drobnjak, and B. Djuric, "Fracture mechanisms of dual-phase ferrite-martensite steels", Proceed. Conf. XXVIII ETAN, Split (Croatia), (1984), p. 225.

S.V. Ratkovic, V. Radmilovic, “Computer simulation of AP domain formation in the presence of vacancies”, Proceed. of VI Yugoslav metallurgical symposium, JSM'96, Vrnjacka Banja, 1996, pp. 313-316.

N. Ilic, M. Jovanovic, V. Radmilovic, Dj. Drobnjak, “Dynamical deformation aging in Al-Li alloys”, Proceed. of VI Yugoslav metallurgical symposium, JSM'96, Vrnjacka Banja, 1996, pp. 273-276.

V. Radmilovic, D. Mihajlovic, M. Rogulic, “Some characteristics of structure of Al-Zn-Mg alloys under low cycle fatigue”, Proceed. of II JUGAS, Radenci, Kidricevo, Slovenia, 1980, p. 479.

V. Radmilovic, Dj. Drobnjak, M. Jovanovic, “Discontinuous yielding of V/Nb steel”, Proceed. of XXVII ETAN a, Struga, Macedonia, 1983, p. V.121.

V. Radmilovic and M. Rogulic, "Transmission electron microscopy in materials science" (invited), Proceed. Symp. YUSEM-86 (Yugoslav Society for Electron Microscopy), Plitvice (Croatia), (1986), pp. 9-15.

V. Radmilovic, G. Shiflet, G. Thomas, “The role of vacancies during S-phase precipitation in Al-Li-Cu-Mg and Al-Cu-Mg alloys”, Proceed. Symp. YUSTOM-89, Vrnjacka Banja, (1989), p. 63.

V. Radmilovic, "High resolution electron microscopy", (invited), Proceed. Symp. YUSEM-89 (Yugoslav Society for Electron Microscopy), Igman - Sarajevo (Bosnia & Herzegovina), (1989), pp. 174-180.

 

S. Matijasevic, S. V. Markovic, B. Jordovic, and V. Radmilovic, "Porosity in high silicon cast iron", Proceed. Of VII Yugoslav Foundry Congress, Novi Sad, (1986), p. 294-230.

 

M. Jovanovic, M. Stamatovic, and V. Radmilovic, "The effect of double stage heat treatment on Fe/Cu powder bimetallic strip", Proceed. Symp. JSM-IV (Yugoslav Symposium on Metallurgy), Belgrade, (1987), p. 381-388.

V. Radmilovic, J. Glazer, J.W. Morris, G. Thomas, “The significance of ratio d’ particle size/dislocation pair spacing in Al-Li alloys”, Proceed. Symp. JSM IV, Belgrade, (1987), p. 435.

M.G. Pavlovic, V. Radmilovic, A. Dekanski, E.R. Stojiljkovic, K.I. Popov, “Sjaj galvanskih prevlaka bakra kao funkcija njihove hrapavosti”, XIV Savetovanje Zastita materijala organskim, metalnim i konverzionim prevlakama, Zbornik radova, 1993, str. 133-140.

M.G. Pavlovic, E.R. Stojiljkovic, V. Radmilovic, A. Dekanski, and K.I. Popov, “Ispitivanje povrsine sjajnih galvanskih prevlaka bakra skenirajucim elektronskim mikroskopom (SEM) i skenirajucim tunelskim mikroskopom (STEM)”, XXV Oktobarsko savjetovanje rudara i metalurga, Zbornik radova, 1993., str. 779-782.

N. Ilic, Dj. Drobnjak, V. Radmilovic, M.T. Jovanovic, D. Markovic, "Discontinuous yielding in Al-Li alloys”, Proceed. Symp. Memorial Sci. Meet., "Metallurgy'94", (1994), pp. 299-302.

N. Ilic, Dj. Drobnjak, V. Radmilovic, M.T. Jovanovic, D. Markovic, " Apparent activation energy for discontinuous yielding in Al-Li alloys” Proceed. Conf. ETAN, 1995., pp. 448-451.

S. Ratkovic and V. Radmilovic, “Monte-Carlo simulation of AP L1₂domain formation”, Proceed. Conf. ETAN, (1995), pp. 456-459.

M. Popovic, E. Romhanji, V. Radmilovic, V. Milenkovic, “Structure and deformation behavior of AlMg6.5 alloy”, Proceed. Conf. ETAN, Zlatibor, 1997, pp. 512-515.

V. Radmilovic, Dj. Drobnjak, M. Rogulic, “Martensite deformability and fracture mechanisms in dual-phase carbon steel”, Proceed. Conf.YUSEM’83, Kranjska Gora, Slovenia, (1983), p. 271.

V. Radmilovic, Dj. Drobnjak, “Type of martensite and retained austenite morphology in dual-phase steels”, Proceed. Conf. YUSEM’83, Kranjska Gora, Slovenia, (1983), p. 273.

V. Radmilovic, M. Djordjevic, “Epidural lead fracture”; Proceed. Conf. YUSEM’83, Kranjska Gora, Slovenia, (1983), p. 247.

V. Radmilovic, “Amorphization of intermetallic phases in Al-based alloys”, Collection of abstracts of I Electron Microscopy Symp. Of Serbia, Novi Sad, 1994, p. 8.

V. Radmilovic, “Application of high resolution electron microscopy in nanocrystal investigation”, Collection of abstracts of III Electron Microscopy Symp. of Serbia, Belgrade, 1996.(plenary lecture-invited)

S. Ratkovic, V. Radmilovic, “Spinodal decomposition in Al-Li alloys”, Collection of abstracts of III Electron Microscopy Symp. of Serbia, Belgrade, 1996.

M. Novovic, L. Sidjanin, P. Kovac, V. Radmilovic, “Application of SEM in investigation of materials machinability”, Collection of abstracts of III Electron Microscopy Symp. of Serbia, Belgrade, 1996.

V. Radmilovic, S. Ratkovic, “Crystallography of Pt-Ru nanoparticles in real space”, Collection of abstracts of Symp on Crystallography, Palic, 1996, pp. 42-43.

V. Radmilovic, D. Mihajlovic, “The change in plastic/elastic deformation ratio in total strain during low cycle fatigue of Al-Zn-Mg alloys” Oral presentation at XIX Symp. of Chemists, Belgrade, 1975.

D. Mihajlovic, M. Rogulic, A. Mihajlovic, V. Radmilovic, “Structure of cycle deformed Al-4%Zn-1,6%Mg alloy”; II Yugoslav Congress for Industrial Chemistry, Skopje, Macedonia, (1976), p. VI-41.

D. Mihajlovic, M. Rogulic, V. Radmilovic, “The effect of precipitate on dislocation substructure formation in Al-4%Zn-1,6%Mg alloy during low cycle fatigue”; XXII SHD Conf., Belgrade, 1980, p. C.162.

Dj. Drobnjak, V. Milenkovic, V. Radmilovic, E. Romhanji, “The effect of rolling and annealing regime on the properties of Ms/Fe/Ms bimetallic strips”; Abstracts of Symp. "Materials’83", Titovo Uzice, 1983, p. 24.

D. Velimirovic, M. Djordjevic, S. Lotina, V. Radmilovic, D. Kocovic, D. Kostic, Z. Lovric, “Epidural lead fracture complications in the treatment of peripheral vascular disease with spinal cord stimulation”; 15th World Congress of IUA, 1989, p.456.

S. Miyasato, V. Radmilovic, G. Thomas, “Effect of cooling rate on the formation of delta prime (Al₃Li) precipitate in aluminum lithium based alloys”; TMS Annual Meeting, 1990, Anaheim, California.

P. Zivanovic, S. Vucic, V. Radmilovic, Dj. Drobnjak, “Texture and properties rolled and annealed low phosphorous copper of commercial purity”, Proceed. XXXIII SHD Conf., Novi Sad, 1991, p. 286.

J.B. Zotovic, S.Lj. Gojkovic, V. Radmilovic, and S.K. Zecevic, "Characterization and catalytic properties of electrochemically deposited iron-phosphorus alloys", 47th ISE Meeting, September 1-6, 1996, Veszprém-Balatonfüred, Hungary.

T. Radetic, W.A. Soffa, V. Radmilovic, ”HREM observations of mechanical twinning in Cu-Ti alloys: structure of incoherent and coherent twin interfaces. [Conference Paper] Boundaries and Interfaces in Materials: David A. Smith Symposium. Proceedings of the Memorial Symposium Held at the 1997 TMS Fall Meeting. TMS. 1998, pp.83-8. Warrendale, PA, USA.

K.I. Popov, M.G. Pavlovic, E.R. Stojiljkovic, V. Radmilovic, “Kelvinov efekat pri elektrohemijskom talozenju dendrita metala”, SHD, Jubilarni naucni skup, Zbornik apstrakta, 1997, str. PS-68.

B. Bozic, N. Vidojevic, N. Novovic-Simovic, V. Radmilovic, “Specificnosti strukture beinitnog konstituenta u niskougljenicnom niskolegiranom celiku povecane cvrstoce”; Odeljenje tehnickih nauka SANU, Belgrade, 1985.

V. Radmilovic and Dj. Drobnjak, "Type of martensite and retained austenite morphology in dual-phase steels", Proceed. Symp. YUSEM-83 (Yugoslav Society for Electron Microscopy), Kranjska Gora (Slovenia), (1983), p. 273.

 

V. Radmilovic and M. Djordjevic, "Lead fracture in endocardiac electrode system", Proceed. Symp. YUSEM-83 (Yugoslav Society for Electron Microscopy), Kranjska Gora (Slovenia), (1983), p. 247.

 

V. Radmilovic and D. Mihailovic, "Low-cycle fatigue of Al-Zn-Mg alloys", Serbian Chemical Society annual meeting, SHD-XIX, Belgrade, (1977), p. 27.

 

D. Mihailovic, M. Rogulic, and V. Radmilovic, "Effect of precipitates on dislocation substructure formation during low-cycle fatigue of Al-4Zn-2Mg alloy", Serbian Chemical Society annual meeting, SHD-XXII, Belgrade, (1980), p. 162.

 

Dj. Drobnjak, V. Milenkovic, V. Radmilovic, and E. Romhanji, "Effect of rolling and annealing practice on the properties of Ms/Fe/Ms bimetallic strip", Proceed. Symp. MATERIALS-83, Uzice, (1983), p. 24.

 

S. Stojanovic, M. Jovanovic, and V. Radmilovic, "Static and dynamic strain aging of Cu-Ti alloys", Serbian Chemical Society annual meeting, SHD-XXXIII, Novi Sad, (1991), p. 300.

 

T. Radetic and V. Radmilovic, "Mechanical properties and deformation behavior of Cu-Ti alloys", Serbian Chemical Society annual meeting, SHD-XXXIII, Novi Sad, (1991), p. 301.

 

V. Radmilovic, "Composite materials", (invited), Serbian Chemical Society annual meeting, SHD-XXXIII, Novi Sad, (1991), p. 285.

 

P. Zivanovic, S. Vucic, V. Radmilovic, and Dj. Drobnjak, "Texture and properties of rolled and annealed low phosphorous commercial purity copper", Serbian Chemical Society annual meeting, SHD-XXXIII, Novi Sad, (1991), p. 286.

 

V. Radmilovic, "Characterization of inorganic materials by transmission electron microscopy", (invited), Proceed. Symp. 3rd YUSEM, Nis, (1992), p. 8.

T. Radetic, W. A. Soffa, and V. Radmilovic, "Deformation twinning in Cu-Ti alloys", Proceed. Symp. 3rd YUSEM, Nis, (1992), p. 73.

V. Maksimovic, V. Radmilovic, and M. Jovanovic, “New aluminum alloys for structural application”, Symposium on deformation and processing of metals and alloys, Belgrade, June 2002, Serbia.

 

Lectures

V. Radmilovic, “Lithium detection using critical voltage experiment”, University of Virginia, Charlottesville, August, 1988 (invited lecture).

V. Radmilovic, “Ordering reaction in Al-Li base alloys”, University of Pittsburgh, Pittsburgh, PA, September, 1988 (invited lecture).

V. Radmilovic, “Precipitation reactions in Al-Li alloys”, University of California, Berkeley, September 1987.

V. Radmilovic, “Current objective of Al-Li alloys”, Exxon research laboratory, New Jersey, May 1987. (Invited lecture).

V. Radmilovic, “Recent results in Al-Li alloy development”, Serbian Chemical Society, Metallurgical section, Belgrade, October 1987. (Invited lecture).

V. Radmilovic, “Spinodal decomposition and heterogeneous precipitation in Al-Li-based alloys”, Serbian Chemical Society, Metallurgical section, Belgrade, October 1988. (Invited lecture).

V. Radmilovic, Series of lectures in the course: “Scanning and transmission electron microscopy”, University of Belgrade, Faculty of Technology and Metallurgy, Dept. of Metallurgy, Belgrade, June 1983.

V. Radmilovic, “Al-Zr alloys”, University of California, Berkeley, Professor Gareth Thomas’ research group seminar, September 1991.

V. Radmilovic, “Aluminium matrix based composite materials”, Technical Faculty Bor, Belgrade University, March 1992. (Invited lecture).

V. Radmilovic, “Metal matrix composites-State of art and contemporary trends”, University of Montenegro, Podgorica, March 1992. (Invited lecture).

V. Radmilovic, “Electron microscopy studies of precipitation in aluminum alloys”, University of Pittsburgh, USA, June 1992. (Invited lecture).

V. Radmilovic, “High resolution electron microscopy studies of S-phase (Al₂CuMg) in aluminum alloys”, McMaster University, Canada, July 1992. (Invited lecture).

V. Radmilovic, “Equilibrium and non-equilibrium phases in Al-Zr alloys”, University of Toronto, Canada, June 1992. (Invited lecture).

V. Radmilovic, “Precipitation phenomena in aluminum lithium alloys”, ALCOA-Aluminum Company of America, Research and Development Center, Pittsburgh, USA, August 1992. (Invited lecture).

V. Radmilovic, “Coherent and Non coherent Al₃Zr precipitates in Al-Zr and Al-Li-Zr alloys”, Allied Signal research laboratory, New Jersey, June 1992. (Invited lecture).

V. Radmilovic, “High resolution electron microscopy as a microbeam analytical tool”, QMA'92, 40th Scottish summer school on quantitative microanalysis, Dundee, Scotland, 1992. (Invited lecture).

V. Radmilovic, “Non stoichiometry of Al-Zr intermetallic compounds”, Allied Signal research laboratory, New Jersey, July 1994. (Invited lecture).

V. Radmilovic, “Precipitation sequences in Al based alloys”, Allied Signal research laboratory, New Jersey, July 1993. (Invited lecture).

V. Radmilovic, “Al-Nd-Zn nanophase particles in Al based alloys”, University of Pittsburgh, USA, August 1993. (Invited lecture).

V. Radmilovic, “Structure and chemical composition of Pt-Ru catalysts”, University of Pittsburgh, USA, September 1994. (Invited lecture).

V. Radmilovic, “Structure, morphology and distribution of Pt-Ru nanoparticles supported on carbon black”, Materials Science Division, Lawrence Berkeley Laboratory, University of California, Berkeley, USA, August 1994.

V. Radmilovic, “Atomic resolution microscopy of Pt-Ru nanoparticles - Fresnel effect”, National Center for Electron Microscopy, University of California, Berkeley, USA, September 1994.

V. Radmilovic, “Physical metallurgy fundamentals of Al-Li based alloys”, University “St. Kiril & Metodij”, Skopje, Macedonia, May 1997. (Invited lecture).

V. Radmilovic, “High resolution electron microscopy - Application in materials science”, University of Maryland, August 1997 (invited lecture).

V. Radmilovic, “S-phase precipitation in Al-based alloys”, General Motors-Technical Center, Detroit, August 1997 (invited lecture).

V. Radmilovic, “Structure of S-phase in Al-based alloys”, National Center for Electron Microscopy, Lawrence Berkeley National Laboratory, University of California, Berkeley, October 1998 (invited lecture).

V. Radmilovic, “Structure and morphology of S-phase precipitates in aluminum alloys”, University of Pittsburgh, School of Engineering, March 2000 (invited lecture).

V. Radmilovic, “Crystal and interfaces structure determination of Al₂CuMg precipitate in aluminum by quantitative high resolution electron microscopy”, University of Toronto, Faculty of Applied Science and Engineering, March 2000 (invited lecture).

V. Radmilovic, “Structure determination and structure refinment of Al₂CuMg precipitates by quantitative high resolution electron microscopy”, Aluminum company of America, ALCOA Technical Center, Pittsburgh, PA, March 2000 (invited lecture).

V. Radmilovic, “Precipitation phenomena in super-saturated solid solutions”, Oak Ridge National Laboratory, Oak Ridge, Tennessee, May 2000.

V. Radmilovic, “High resolution electron microscopy assisted alloy design”, National Center for Electron Microscopy, Lawrence Berkeley National Laboratory, University of California, Berkeley, February 2001 (invited lecture).

V. Radmilovic, “Precipitation and strengthening phenomena in Al-Si-Ge and Al-Si-Ge-Cu alloys”, Hungarian academy of science, Budapest, April 2001(invited lecture).

V. Radmilovic, “Microalloying in aluminum alloy design”, University of Montenegro, Podgorica, Montenegro, Yugoslavia, May 2001 (invited lecture).

V. Radmilovic, “Microstructural characterization of Platinum based electrocatalysts”, Materials Science Division, Lawrence Berkeley National Laboratory, University of California, Berkeley, June 2001.

V. Radmilovic, “TEM and CALPHAD assisted alloy design”, Max Planc Institute, Dusseldorf, August 2002. (Invited lecture).

V. Radmilovic, “TEM and CALPHAD assisted alloy design”, University of Pretoria, Pretoria, South Africa, August 2002. (Invited lecture).

V. Radmilovic, “Fundamentals of Alloy Design”, October 2003, Vandebilt university, Neshville, Tennessee (Invited lecture).

V. Radmilovic, “Precipitation hardening phenomena in Al-Si-Ge and Al-Cu-Si-Ge alloys”, September 2004, Delft University, Delft, Holland, (Invited lecture).

V. Radmilovic, “Nanopatterning by platinum deposition in a dual beam FIB”, University of Belgrade, Belgrade, Serbia, September 2004, (Invited lecture).

V. Radmilovic, “Structure and properties of nanovires”, University of Montenegro, Podgorica, Montenegro, September 2004, (Invited lecture).

V. Radmilovic, “Alloy Design”, March 2005, University of New Orleans, New Orleans, Louisiana, (Invited lecture).

V. Radmilovic, “Transmission electron aberration corrected microscope-a new era in biological and materials sciences”, Electron microscopy society of Serbia and Montenegro & Medical school, University of Belgrade, July 2005, (Invited lecture).

V. Radmilovic, “Core-Shell precipitate structure in AlScZr alloys”, University of Montenegro, Podgorica, Montenegro, September 2005, (Invited lecture).

V. Radmilovic, “Formation of <111> fiber texture in b-SiC films deposited on Si(100) substrates”, University of Alberta, Edmonton, October 2005 (Invited lecture).

V. Radmilovic, “Texture formation in polar crystals”, University of Antwerp, Antwerp, Belgium, June 2006 (Invited lecture).

V. Radmilovic, “Precipitation kinetics in AlScZr alloys”, National Institute for Materials Science, Tskuba, Japan, August 2006, (Invited lecture).

V. Radmilovic, “Precipitation phenomena in AlScZr alloys”, Purdue University, October 2006, (Department seminar, Invited lecture).

V. Radmilovic, “Coarsening of Core/Shell Nanostructures Embedded in Solids”, Electron Microscopy Laboratory, University of Vienna, June 2007, (Invited lecture).

V. Radmilovic, "Quantitative in-situ uniaxial compression testing of Nanostructured Pillars in a TEM". Deprtment of Physics, University off Vienna, June 2007. (Department seminar, Invited lecture).

V. Radmilovic, "Can metallic thin films be competitive to silicon for NEMS applications". University of Belgrade, Belgrade, Serbia, June 2007. (Department seminar, Invited lecture).

V. Radmilovic, "Can metallic thin films be competitive to silicon for NEMS applications". University of Montenegro, Podgorica, Montenegro, June 2007. (Department seminar, Invited lecture).

 

Text-books, lecture notes, and chapters in the books

 

V. Radmilovic, "Phase transformations in solids", Authorized Lecture notes, (1993), 284 pages, Department of Physical Metallurgy, University of Belgrade, Internal publication.

 

V. Radmilovic, "Fundamental of Crystallography and Diffraction", Authorized Lecture notes, (1993), 96 pages, Department of Physical Metallurgy, University of Belgrade, Internal publication.

 

N.M. Markovic, V. Radmilovic and P.N. Ross, “Physical and Electrochemical Characterization of Bimetallic Nanoparticle Electrcatalysts”; in: Catalysis and Electrocatalysis at Nanoparticle Surfaces, Eds.: E. Savinova, K. Vayenas and A. Wieckovski, Marcel Dekker Publ., 2003, pp. 311-342.

 

Patents

 

 

T. Devine, Y. Suzuki, T.S. Mintz, Y.B. Bhargava, S. Thorne, and V. Radmilovic, “Oxide nanowires”, U.S. patent disclosure submitted, patent application in progress, (2005).

 

V. Radmilovic, D. Mitlin and U. Dahmen, “Ultra-Hard, Ductile and Conductive Al-Si Nanocomposites Synthesized by High Rate Co-Evaporation”, U.S. patent disclosure submitted, patent application in progress, (2005).

 

D. Mitlin, C. Ophus, S. Evoy, V. Radmilovic and U. Dahmen, “NEMS cantilevers synthesized from atomically-smooth amotphous-nanocrystalline aluminum alloys”, patent disclosure submitted, patent application in progress, (2006).

 

D. Mitlin, C. Ophus, S. Evoy, V. Radmilovic, R. Mohammadi, K. Westra, N. Nelson-Fitzpatrick, and Z. Lee: “Nanocomposite films”, 2007, patent pending.

 

D. Mitlin, M. Brougham, C. Ophus, C. Harrower, J. Fraser Forbes and V. Radmilovic, “A method for Room-temperature synthesis of highly crystallographically oriented nanocrystalline AIN films using an amorphous nanocrystalline metallic AlMo substrate”, 2007, patent pending.

 

Thomas Duden and Velimir Radmilovic, “InterferometricTapered Fiber Based Displacement Sensor for Nanostructure Characterization”, U.S. patent disclosure submitted, patent application in progress, (2008).