Retlif Testing Laboratories

NVLAP Lab Code: 100267-0

Address and Contact Information:

NVLAP Accreditation Information

Send E-Mail to NVLAP at: NVLAP@nist.gov

Electromagnetic Compatibility & Telecommunications

• Emissions Test Methods:

[12/1399-30] MIL-STD 1399 Section 300A
Interface standard for Shipboard Systems: Electric Power, Alternating Current

[12/160D21] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 21 - Emission of Radio Frequency Energy

[12/160F21] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 21 - Emissions of Radio Frequency Energy

[12/60E213] RTCA DO-160E
Section 21.3, RF Emissions, Conducted

[12/60E214] RTCA DO-160E
Section 21.4, RF Emissions, Radiated

[12/610006c] EN 61000-6-3 (2001) and IEC 61000-6-3 (1996)
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments

[12/610006d] EN 61000-6-4 (2001) and IEC 61000-6-4 (1997)
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments

[12/610006k] IEC 61000-6-4 (2006-07)
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments

[12/CIS11b] IEC/CISPR 11(2003) & EN 55011(1998), A1(1999), A2(2002)
Industrial, scientific and medical (ISM) radio-frequency equipment - Radio disturbance characteristics - Limits and methods of measurement

[12/CIS13]
IEC/CISPR 13 (2001-04), EN 55013 (2001), AS/NZS CISPR 13 (2003), and CNS 13439 (2001): Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement

[12/CIS14] CISPR 14-1 (March 30, 2000)
Limits and Methods of Measurement of Radio interference Characteristics of Household Electrical Appliances, Portable Tools and Similiar Electrical Apparatus - Part 1: Emissions

[12/CIS14a] EN 55014-1 (1993), A1 (1997), A2 (1999)

[12/CIS14a3] EN 55014-1 (2000) with Amendments A1(2001) & A2 (2001)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

[12/CIS14a4] EN 55014-1 (2006)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

[12/CIS14b] AS/NZS 1044 (1995)

[12/CIS14x1] IEC/CISPR 14-1, Ed. 5.0 (2005)
Electromagnetic Compatibility - Requirements for Household Appliances, Electric Tools and Similar Apparatus - Part 1: Emission

[12/CIS22a] IEC/CISPR 22 (1993) and EN 55022 (1994)
Limits and methods of measurement of radio disturbance characteristics of information technology equipment, Amendment 1 (1995) and Amendment 2 (1996)

[12/CIS22a1] IEC/CISPR 22 (1997) A1(2002); EN55022(1998)A1(2000),A2(2003)
Limits and methods of measurement of radio disturbance characteristics of information technology equipment

[12/CIS22b] CNS 13438 (1997)
Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment

[12/CIS22g] IEC/CISPR 22, Edition 5 (2005-04) and EN 55022 (2006)
Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment

[12/CIS25] IEC/CISPR 25, Ed. 1 (1995-09)
Limits and methods of measurement of radio disturbance characteristics for the protection of receivers used on board vehicles

[12/EM02a]
IEC 61000-3-2, Edition 2.1 (2001-10), EN 61000-3-2 (2000), and AS/NZS 2279.1 (2000): Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A)

[12/EM03b] IEC 61000-3-3, Edition 1.1(2002-03) & EN 61000-3-3, A1(2001)
EMC - Part 3-3: Limits - Limitations of voltage changes, voltage flucuations and flicker, in public low-voltage supply-systems, for equipment with rated current <=16 A per phase and not subject to conditional connections

[12/EM03ii] IEC 61000-3-3, Edition 1.2 (2005-10)
EMC- Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low- voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection

[12/FCC15b] ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart B
Unintentional Radiators

[12/FORD01] Ford ES-XW7T-1A278-AA

[12/KN11b] KN11 (Annex 3) with RRL Notice No. 2006-126 (Dec. 29, 2006)
Technical Requirements for Electromagnetic Interference; With KN 11 (Annex 3)

[12/KN11c] KN11 (Annex 3) with RRL Notice No. 2006-128 (Dec. 29, 2006)
Conformity Assessment Procedure for Electromagnetic Interference; With KN 11 (Annex 3)

[12/KN13] KN13 with RRL Notice No. 2004-69 (Sept. 22, 2004)
Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement

[12/KN13a] KN13 (Annex 4) with RRL Notice No. 2007-100 (Dec. 26, 2007)
Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement

[12/KN14] KN14 with RRL Notice No. 2004-69 (Sept. 22, 2004)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Emission

[12/KN14a] KN14 (Annex 5) with RRL Notice No. 2007-100 (Dec. 26, 2007)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Emission

[12/KN15] KN15 with RRL Notice No. 2004-69 (Sept. 22, 2004)
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

[12/KN22] KN22 with RRL Notice No. 2005-82 (Sept. 29, 2005)
RRL Notice No. 2005-82: Technical Requirements for Electromagnetic Interference Annex 8 (KN-22), RRL Notice No. 2005-131: Conformity Assessment Procedures for Electromagnetic Interference

[12/KN22a] KN22 (Annex 8) with RRL Notice No. 2006-128 (Dec. 29, 2006)
Conformity Assessment Procedure for Electromagnetic Interference; With KN 22 (Annex 8)

[12/KN22b] KN22 (Annex 8) with RRL Notice No. 2006-126 (Dec. 29, 2006)
Technical Requirements for Electromagnetic Interference; With KN22 (Annex 8)

[12/KN22c] KN22 (Annex 8) with RRL Notice No. 2007-100 (Dec. 26, 2007)
Conformity Assessment Procedure for Electromagnetic Interference; With KN 22 (Annex 8)

[12/KN22d] KN22 (Annex 8) with RRL Notice No. 2008-04 (Feb. 11, 2008)
Conformity Assessment Procedure for Electromagnetic Interference; With KN 22 (Annex 8)

[12/KN30] Korea RRL Notice 30 (2004)
Conformity Assessment Procedures for Electromagnetic Interference using KN 16-1, KN 16-2, KN 11, KN 13, KN 14-1, KN 15, KN 19, KN 22, KN 41, and KN 50.

[12/KNcis11] KN11 with RRL Notice No. 2005-82 (Sept. 29, 2005)
Industrial, scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement

[12/KR126] RRL Notice No. 2006-126 (Dec. 29, 2006)
Technical Requirements for Electromagnetic Interference

[12/KR127a] RRL Notice No. 2006-127 (Dec. 29, 2006)
Technical Requirements for Electromagnetic Susceptibility

[12/KR128] RRL Notice No. 2006-128 (Dec. 29, 2006)
Conformity Assessment Procedure for Electromagnetic Interference

[12/KR129] RRL Notice No. 2006-129 (Dec. 29, 2006)
Conformity Assessment Procedure for Electronic Susceptibility

[12/KR66] RRL Notice No. 2004-66 (September 2004)
Technical Requirements for the Measurement of Electromagnetic Field Strength

[12/Kn11d] KN11 (Annex 3) with RRL Notice No. 2008-02
Conformity Assessment Procedure for Electromagnetic Interference; With KN 11 (Annex 3)

[12/T51a] AS/NZS CISPR 22 (2004)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement

[12/UMTA01] UMTA-MA-06-0153-85-9
Inductive Interference in Rapid Transit Signaling Systems - Volume III: Data and Test Results

[12/UMTA02] UMTA-MA-06-0153-85-11
Radiated Interference in Rapid Transit Signaling Systems - Volume II: Suggested Test Procedures

[12/UMTA03] UMTA-MA-06-0153-87-2
Conductive Interference in Rapid Transit Signaling Systems - Volume II: Suggested Test Procedures

• Immunity Test Methods:

[12/160D15] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 15 - Magnetic Effect

[12/160D16] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 16 - Power Input

[12/160D17] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 17 - Voltage Spike

[12/160D18] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 18 - Audio Frequency Conducted Susceptibility - Power Inputs

[12/160D19] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 19 - Induced Signal Susceptibility

[12/160D20] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 20 - Radio Frequency Susceptibility (Radiated and Conducted)

[12/160D22] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 22 - Lightning Induced Transient Susceptibility

[12/160D25] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 25 - Electrostatic Dischare (ESD)

[12/160F15] RTCA/DO 160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 15 - Magnetic Effect

[12/160F16] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 16 - Power Input

[12/160F17] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 17 - Voltage Spike

[12/160F18] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 18 - Audio Frequency Conducted Suspceptibility - Power Inputs

[12/160F19] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 19 - Induced Signal Susceptibility

[12/160F20] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 20 - Radio Frequency Susceptibility (Radiated and Conducted)

[12/160F22] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 22 - Lightning Induced Transient Susceptibility

[12/160F25] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 25 - Electrostatic Discharge (ESD)

[12/50121a] EN 50121-1 (2000) and prEN 50121-1 (1997)
Railway applications - Electromagnetic compatibility - Part 1: General

[12/501304a] EN 50130-4 (1995) + A1(1998) & A2(2003)
Alarm systems - Part 4. Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder and social alarm systems

[12/50199] EN 50199 (1996)
Electromagnetic compatibility (EMC) - Product standard for arc welding equipment

[12/60945] EN 60945 (1997) and IEC 945 (1996)
Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results

[12/60945a] EN 60945 (2002)
Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results

[12/60E15] RTCA DO 160E
Section 15, Magnetic Effects

[12/60E16] RTCA DO160E
Section 16, Power Input

[12/60E17] RTCA DO-160E
Section 17, Voltage Spikes

[12/60E18] RTCA DO-160E
Section 18, Audio Frequency Conducted Susceptibility

[12/60E19] RTCA DO-160E
Section 19, Induced Signal Susceptibility

[12/60E204] RTCA DO-160E
Section 20.4, RF Susceptibility, Conducted

[12/60E205] RTCA DO-160E
Section 20.5, RF Susceptibility, Radiated

[12/60E22] RTCA DO-160E
Section 22, Lightning Induced Transient Susceptibility

[12/60E25] RTCA DO-160E
Section 25, Electrostatic Discharge (ESD)

[12/610006a] EN 61000-6-1 (2001)
Electromagnetic compatibility (EMC) - Part 6 - 1: Generic standards - Immunity for residential, commercial and light-industrial environments

[12/610006b] EN 61000-6-2 (2001)
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments

[12/610006g] IEC 61000-6-2, 1st edition (1999-01)
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments

[12/61000k] EN 61000-6-1 (2007)
Electromagnetic compatibility (EMC) - Part 6 - 1: Generic standards - Immunity for residential, commercial and light-industrial environments

[12/61326a1] EN 61326(1998) and IEC 61326(1997) + A1(1998) & A2(2001)
Electrical equipment for measurement, control and laboratory use - EMC requirements

[12/ABS]
American Bureau of Shipping (ABS) Rules for Building and Classing Steel Vessels (2002): Part 4 - Vessel Systems and Machinery

[12/CIS14i1] EN 55014-2 (1997)
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2. Immunity - Product family standard

[12/CIS16a] IEC/CISPR 16-1, Ed. 2 (1999-10)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1: Radio disturbance and immunity measuring apparatus

[12/CIS24d] IEC/CISPR 24 (1997) & EN 55024 (1998) + A1 (2001), A2 (2002)
Information technology equipment - Immunity characteristics - Limits and methods of measurements

[12/EN82b] EN 50082-2 (March 1995)
Electromagnetic compatibility - Generic immunity standard - Part 2: Industrial environment

[12/ENV01] DD ENV 50204 (1996)
Radiated electromagnetic field from digital radio telephones - Immunity test

[12/I01] IEC 61000-4-2, Ed. 1.2 (2001) + A1, A2; EN 61000-4-2
Electrostatic Discharge Immunity Test

[12/I02] IEC 61000-4-3, Ed. 2.0 (2002-03); EN 61000-4-3 (2002)
Radiated Radio-Frequency Electromagnetic Field Immunity Test

[12/I02g] IEC 61000-4-3, Ed. 3.0 (2006-02)
Electromagnetic compatibility (EMC) - Part 4-3: Testing measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

[12/I03] IEC 61000-4-4(1995), A1(2000), A2(2001); EN 61000-4-4
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test

[12/I03c] IEC 61000-4-4, Ed. 2.0 (2004-07)
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test

[12/I04] IEC 61000-4-5, Ed. 1.1 (2001-04); EN 61000-4-5
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test

[12/I04aa] IEC 61000-4-5, Ed. 2.0 (2005-11); EN 61000-4-5
Electromagnetic Compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test

[12/I05] IEC 61000-4-6, Ed. 2.0 (2003-05); EN 61000-4-6
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

[12/I05g] EN 61000-4-6 (2006)
Immunity to Conducted Disturbances, Induced by Radio Frequency Fields

[12/I06] IEC 61000-4-8, Ed. 1.1 (2001); EN 61000-4-8
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test

[12/I07] IEC 61000-4-11, Ed. 1.1 (2001-03); EN 61000-4-11
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests

[12/I07c] IEC 61000-4-11, Ed. 2 (2004-03) & EN 61000-4-11
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests

[12/I09] EN 50082-1 (1998)
Electromagnetic compatibility - Generic immunity standard - Part 1: Residential, commercial and light industry

[12/J111301] SAE J1113/1 (2006-10)
Procedures and Limits for Components of Vehicles, Boats, and Machines (except Aircraft)

[12/J111302] SAE J1113-2 (1996-09)
Electromagnetic compatibility measurement procedures and limits for vehicle components (except aircraft) - Conducted immunity, 30 Hz to 250 kHz - all leads

[12/J111304] SAE J1113-4 (2004-08)
Immunity to Radiated Electromagnetic Fields - Bulk Current Injection (BCI) Method

[12/J111311] SAE J1113-11 (2006-01)
Immunity to Conducted Transients on Power Leads

[12/J111312] SAE J1113-12 (2006-08)
Electrical Interference by Conduction and Coupling

[12/J111313] SAE J1113-13 (2004-11)
Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 13 - Immunity to Electrostatic Discharge

[12/J111322] SAE J1113-22 (2003-11)
Immunity Radiated Magnetic Fields

[12/J111324] SAE J1113/24
Immunity to radiated electromagnetic fields; 10 kHz to 200 MHz - Crawford TEM cell and 10 kHz to 5 GHz - Wideband TEM cell

[12/J111341] SAE J1113/41 (2000-05)
Limits and methods of measurement of radio disturbance characteristics of components and modules for the protection of receivers used on board vehicles

[12/J111342] SAE J1113-42 (2006-10)
EMT-Component Test Procedure - Part 42- Conducted Transient Emission

[12/J1113a] SAE J1113-21 (2005-10)
Immunity to Electromagnetic Fields, Absorber Lined Chamber

[12/J1113b] SAE J1113-23 (2002-10)
Immunity Radiated Magnetic Fields, Strip Line Method

[12/J1113c] SAE J1113-41 (2006-09)
Radio Disturbance Characteristics for the Protection of Receivers Used on Board Vehicles

[12/KN11] KN 61000-4-11 with RRL Notice No. 2005-83 (Sept. 29, 2005)
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests

[12/KN11a] KN 61000-4-11 with RRL Notice No. 2005-130 (Dec 27, 2005)
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests

[12/KN11e] KN 61000-4-11 (Annex 7); RRL No. 2007-101 (Dec. 26, 2007)
Conformity Assessment Procedure for Electromagnetic Interference

[12/KN132] Korea RRL Notice 132 (october 2005)
Conformity Assessment Procedure for Electromagnetic Susceptibility

[12/KN150] EMS RRL Notice No. 2005-130: 2005.12.27
RRL Notice No. 2005-130: Technical Requirements for Electromagnetic Susceptibility Annex 1-7 (KN61000-4-2, -3, -4, -5, -6, -8, -11), RRL Notice No. 2005-132: Conformity Assessment Procedures for Electromagnetic Susceptibility

[12/KN2] KN 61000-4-2 with RRL Notice No. 2005-83 (Sept. 29, 2005)
Electrostatic Discharge Immunity Test

[12/KN24] KN24 (December 2005) with RRL Notice No. 2005-83
Information Technology Equipment - immunity charateristics - limits and methods of measurements

[12/KN24a] KN24 (December 2005) with RRL Notice No. 2006-127
Information technology equipment – Immunity characteristics – Limits and methods of measurement

[12/KN24b] KN24 (Annex 11) with RRL Notice No. 2007-11 (Dec. 29, 2006)
Information Technology Equipment - immunity charateristics - limits and methods of measurements

[12/KN2a] KN 61000-4-2 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Electrostatic Discharge Immunity Test

[12/KN2b] KN 61000-4-2 (Annex 1);RRL Notice No. 2007-101(Dec. 26 2007)
Electrostatic Discharge Immunity Test

[12/KN3] KN 61000-4-3 with RRL Notice No. 2005-83 (Sept. 29, 2005)
Radiated, radio-frequency, electromagnetic field immunity test

[12/KN31] Korea RRL Notice No. 31 (2004)
Conformity Assessment Procedures for Electromagnetic Susceptibility using KN 61000-4-2, KN 61000-4-3, KN 61000-4-4, KN 61000-4-5, KN 61000-4-8, KN 61000-4-11, KN 20, KN 41, and KN 50.

[12/KN3a] KN 61000-4-3 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Radiated, radio-frequency, electromagnetic field immunity test

[12/KN3b] KN 61000-4-3 (Annex 2); RRL Notice No. 2007-101(Dec.26,2007)
Radiated, radio-frequency, electromagnetic field immunity test

[12/KN4] KN 61000-4-4 with RRL Notice No. 2005-83 (Sept. 29, 2005)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test

[12/KN4a] KN 61000-4-4 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Electrical Fast Transient/Burst Immun

[12/KN4b] KN 61000-4-4 (Annex 3); RRL No. 2007-101 (Dec. 26, 2007)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test

[12/KN5] KN 61000-4-5 with RRL Notice No. 2005-83 (Sept. 29, 2005)
Surge Immunity Test

[12/KN5a] KN 61000-4-5 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Surge Immunity Test

[12/KN5b] KN 61000-4-5 (Annex 4); RRL No. 2007-101 (Dec. 26, 2007)
Surge Immunity Test

[12/KN6] KN 61000-4-6 with RRL Notice No. 2005-83 (Sept. 29, 2005)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

[12/KN6a] KN 61000-4-6 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Immunity to conducted disturbances,

[12/KN6b] KN 61000-4-6 (Annex 5); RRL No. 2007-101 (Dec. 26, 2007)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

[12/KN70] Korea RRL Notice 70 (2004)
Technical Requirements for Electromagnetic Susceptibility using KN 61000-4-2, KN 61000-4-3, KN61000-4-4, KN 61000-4-5, KN 61000-4-6, KN 61000-4-8, KN 20, KN 41, and KN 51

[12/KN8] KN 61000-4-8 with RRL Notice No. 2005-83 (Sept. 29, 2005)
Power Frequency Magnetic Field Immunity Test

[12/KN8a] KN 61000-4-8 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Power Frequency Magnetic Field Immunity Test

[12/KN8b] KN 61000-4-8 (Annex 6); RRL No. 2007-101 (Dec. 26, 2007)
Power Frequency Magnetic Field Immunity Test

[12/Lloyd1] Lloyd's Register - LR Type Approval System
Test Specification Number 1 (1996)

[12/M1275b] MIL-STD-1275B (November 20, 1997)
Characteristics of 28 Volt DC Electrical Systems in Military Vehicles

• MIL-STD-462 : Conducted Emissions:

[12/A01]
MIL-STD-462 Method CE01

[12/A04]
MIL-STD-462 Method CE02

[12/A06]
MIL-STD-462 Method CE03

[12/A08]
MIL-STD-462 Method CE04

[12/A10]
MIL-STD-462 Method CE06

[12/A12]
MIL-STD-462 Method CE07

[12/A13]
MIL-STD-462 Version D Method CE101

[12/A14]
MIL-STD-462 Version D Method CE102

[12/A15]
MIL-STD-462 Version D Method CE106

[12/A16]
MIL-STD-461 Version E Method CE101

[12/A17]
MIL-STD-461 Version E Method CE102

[12/A18]
MIL-STD-461 Version E Method CE106

[12/A19]
MIL-STD-461 Version F Method CE101

[12/A20]
MIL-STD-461 Version F Method CE102

[12/A21]
MIL-STD-461 Version F Method CE106

• MIL-STD-462 : Conducted Susceptibility:

[12/B01]
MIL-STD-462 Method CS01

[12/B02]
MIL-STD-462 Method CS02

[12/B04]
MIL-STD-462 Method CS03/CS04/CS05/CS08

[12/B05]
MIL-STD-462 Method CS06

[12/B06]
MIL-STD-462 Method CS07

[12/B07]
MIL-STD-462 Method CS09

[12/B08]
MIL-STD-462 Method CS10

[12/B09]
MIL-STD-462 Method CS11

[12/B10]
MIL-STD-462 Method CS12

[12/B11]
MIL-STD-462 Method CS13

[12/B12]
MIL-STD-462 Version D Method CS101

[12/B13]
MIL-STD-462 Version D Method CS103

[12/B14]
MIL-STD-462 Version D Method CS104

[12/B15]
MIL-STD-462 Version D Method CS105

[12/B16]
MIL-STD-462 Version D Method CS109

[12/B17]
MIL-STD-462 Version D Method CS114

[12/B18]
MIL-STD-462 Version D Method CS115

[12/B19]
MIL-STD-462 Version D Method CS116

[12/B20]
MIL-STD-461 Version E Method CS101

[12/B21]
MIL-STD-461 Version E Method CS103

[12/B22]
MIL-STD-461 Version E Method CS104

[12/B23]
MIL-STD-461 Version E Method CS105

[12/B24]
MIL-STD-461 Version E Method CS109

[12/B25]
MIL-STD-461 Version E Method CS114

[12/B26]
MIL-STD-461 Version E Method CS115

[12/B27]
MIL-STD-461 Version E Method CS116

[12/B28]
MIL-STD-461 Version F Method CS101

[12/B29]
MIL-STD-461 Version F Method CS103

[12/B30]
MIL-STD-461 Version F Method CS104

[12/B31]
MIL-STD-461 Version F Method CS105

[12/B32]
MIL-STD-461 Version F Method CS106

[12/B33]
MIL-STD-461 Version F Method CS109

[12/B34]
MIL-STD-461 Version F Method CS114

[12/B35]
MIL-STD-461 Version F Method CS115

[12/B36]
MIL-STD-461 Version F Method CS116

• MIL-STD-462 : Radiated Emissions:

[12/D01]
MIL-STD-462 Method RE01

[12/D02]
MIL-STD-462 Method RE02

[12/D03]
MIL-STD-462 Method RE03

[12/D04]
MIL-STD-462 Version D Method RE101

[12/D05]
MIL-STD-462 Version D Method RE102

[12/D06]
MIL-STD-462 Version D Method RE103

[12/D07]
MIL-STD-461 Version E Method RE101

[12/D08]
MIL-STD-461 Version E Method RE102

[12/D09]
MIL-STD-461 Version E Method RE103

[12/D10]
MIL-STD-461 Version F Method RE101

[12/D11]
MIL-STD-461 Version F Method RE102

[12/D12]
MIL-STD-461 Version F Method RE103

• MIL-STD-462 : Radiated Susceptibility:

[12/E01]
MIL-STD-462 Method RS01

[12/E02]
MIL-STD-462 Method RS02

[12/E04]
MIL-STD-462 Method RS03 employing RADHAZ procedures for high level testing (Consult laboratory for field strengths available)

[12/E05]
MIL-STD-462 Method RS05

[12/E07]
MIL-STD-462 Method RS06

[12/E08]
MIL-STD-462 Version D Method RS101

[12/E09]
MIL-STD-462 Version D Method RS103

[12/E10]
MIL-STD-462 Version D Method RS105

[12/E11]
MIL-STD-461 Version E Method RS101

[12/E12]
MIL-STD-461 Version E Method RS103

[12/E13]
MIL-STD-461 Version E Method RS105

[12/E14]
MIL-STD-461 Version F Method RS01

[12/E15]
MIL-STD-461 Version F Method RS101

[12/E16]
MIL-STD-461 Version F Method RS103

[12/E17]
MIL-STD-461 Version F Method RS105

• Product Safety Test Methods

[12/60601a] IEC 60601-1-2, Ed1(1993);Ed2(2001-09); JIS T0601-1-2(2002.7)
Medical electrical equipment - Part 1 and Part 1-2: General requirements for safety: Collateral standard: EMC - Requirements and tests

• Radio Test Methods

[12/300220a] EN 300 220-1 V1.3.1 (2000-09)
Electromagnetic compatibility and Radio spectrum Matters; Short Range Devices; Radio equipment to be used in the 25 MHz to 1,000 MHz frequency range with power levels ranging up to 500 mW; Part 1: Technical characteristics and test methods

[12/300328a] ETSI EN 300 328-1 V1.2.2 (2000-07)
ERM; Wideband Transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation techniques; Part 1: Technical characteristics and test conditions

[12/300330a] ETSI EN 300 330-1 v1.3.2 (2002-12)
ERM; Short Range Devices; Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 1: Technical characteristics and test methods

[12/300386b] EN 300 386 V1.3.1 (2001-09)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements

[12/300440a] ETSI EN 300 440-1 v1.3.1 (2001-09)
Electromagnetic compatibility and Radio spectrum Matters (ERM): Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 1: Technical characteristics and test methods

[12/301489b] ETSI EN 301 489-3 v1.4.1 (2002-08)
Electromagnetic compatibility and Radio spectrum Matters; ElectroMagnetic Compatibility standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz

[12/KN90] Korea RRL Notice No. 90 (2004)
Conformity Assessment Method for Type Approval and Registration (Radio Equipment)

[12/KR127] RRL Notice No. 2005-127 (Dec 2005)
Technical Requirement for the Radio Equipment for Other Services than Broadcasting, Maritime, Aeronautical and Telecommunications Service

[12/KR22] RRL Notice No. 2005-22 (March 18, 2005)
Technical Requirements for the Radio Equipment for Maritime Mobile Service & Maritime Radio Navigation Service

[12/KR23] RRL Notice No. 2005-23 (March 18, 2005)
Technical Requirements for the Radio Equipment for Aeronautical Mobile Service & Aeronautical Radio Navigation Service

[12/KR24] RRL Notice No. 2005-24 (March 18, 2005)
Technical Requirements for the Radio Equipment for Telecommunications Service

[12/KR25] RRL Notice No. 2005-25 (March 18, 2005)
Technical Requirements for the Radio Equipment for Other Services than Broadcasting, Maritime, Aeronautical and Telecommunications Service

[12/KR84] RRL Notice No. 2006-84 (November 4, 2005)
Technical Requirements for the Radio Equipment for Other Services than Broadcasting, Maritime, Aeronautical and Telecommunications Service

[12/RSS210a] RSS-210, Issue 7 (June 2007)
Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands): Category 1 Equipment

• Telecommunications Test Methods:

[12/300386d] EN 300 386-2 V1.1.3 (1997-12)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements; Part 2: Product family standard

[12/50121b] EN 50121-4 (2000)
EMC Part 4 - Emission and Immunity of the Signaling Telecommunications Apparatus

[12/50121c] EN 50121-3-2 (2000)
EMC Part 3-2: Rolling Stock Apparatus

[12/50155] EN 50155 (2001)
Railway applications - Electronic equipment used on rolling stock

[12/CS03a] Industry Canada CS-03, Issue 9, Amendment 1 (2005)
Compliance Specification for Terminal Equipment, Terminal Systems, Network Protection Devices, Connection Arrangements and Hearing Aids Compatibility

[12/T01]
Terminal Equipment Network Protection Standards, FCC/ACTA Method - 47 CFR Part 68 - Analog and Digital

[12/T01a]
68.302 (Par. c,d,e,f) Environmental simulation; 68.304 Leakage current limit.; 68.306 Hazardous voltage limit.; 68.308 Signal power limit.; 68.310 Longitudinal balance limit.; 68.312 On-hook impedance limit.; 68.314 Billing protection

[12/T01b]
68.316 and 68.317 Hearing Aid Compatibility: technical standards

[12/T01c]
68.302 Environmental simulation (Par. a,b)

[12/TIA968] ANSI/TIA-968-A (2003)
Telephone Terminal Equipment, Technical Requirements for Connection of Terminal Equipment to the Telephone Network

[12/TIA968a] ANSI/TIA-968-A-1 (2003)
Telephone Terminal Equipment, Technical Requirements for Connection of Terminal Equipment to the Telephone Network - Addendum 1

[12/TIA968b] ANSI/TIA-968-A-2 (2004)
Telephone Terminal Equipment, Technical Requirements for Connection of Terminal Equipment to the Telephone Network - Addendum 2

[12/TIA968c] ANSI/TIA-968-A-3 (2005)
Telephone Terminal Equipment, Technical Requirements for Connection of Terminal Equipment to the Telephone Network - Addendum 3

Personal Body Armor Testing

• Personal Body Armor Testing

[29/B01] NIJ 0101.06, July 2008, Sec. 5
Ballistic Resistance of Body Armor, Section 5, Flexible Armor Conditioning Protocol

Return to NVLAP Program Listing

NVLAP Home | Accredited Laboratories | Fields of Accreditation | Publications/Applications |
Mutual Recognition Arrangements | Assessor Resources | Contact NVLAP

For questions concerning the National Voluntary Laboratory Accreditation Program, contact us:

National Voluntary Laboratory Accreditation Program, Standards Services Division, NIST, 100 Bureau Drive, Stop 2140, Gaithersburg, MD 20899-2140
Phone: (301) 975-4016, Fax: (301) 926-2884, Email: NVLAP@nist.gov

Date created: July 26, 2002
Last Updated: February 27, 2009

Privacy Statement / Security Notice / Accessibility Statement | Disclaimer | FOIA