INSTRUCTION CODE NUMBER: ERB-MTR-HV
INSTRUCTION CODE DESCRIPTION:
ERB MOTOR MEGGER
EQUIPMENT TO BE MAINTAINED:
100251 COMPRESSOR C3 MOTOR1005255 1001385 1001419 1002089 1000738 1000398 1005207 1005283 1005286 1005301 1005312 1000666 1000693 1000681 1000689 1000683 1000688 1000706 1000708 1000709 1002787 1002738 1005257 1005259 1005261 1005267 1005248 1006166 1004743 1004742 1004661 1004656 ERB CHILLER 1020 MOTOR
SPECIAL TOOLS / EQUIPMENT:
1. MEGGER INSULATION TESTER
PREREQUISITES / PRECAUTIONS:
1. NOTIFY CCB OF TASK TO BE PERFORMED.
2. COMPLETEN PROCEDURE SHEET AND ASSURE THAT EQUIPMENT IS PROPERLY TAGGED OUT.
SAFETY CODE:
TASK DESCRIPTION:
1. MEGGER THE MOTOR
Follow the meggering procedure IRA found in the Maintenance Procedure MP-D04-001.01-02a. A copy of this procedure can be acquired through Configuration Control, PABX 3-3133.
2. REMOVE BRUSHES FROM BRUSH RIGGING ASSEMBLY.(Insure brushes will not make contact with slip rings during M.C.E. testing)
3. REMOVE DIRT AND CARBON DUST FROM BRUSH HOLDERS.
4. DISCONNECT AND TAG THE MOTOR "SURGE" EQUIPMENT
5. M.C.E. TEST EACH MOTOR
6. RESTORE SYSTEM BACK TO SERVICES.
Take appropriate corrective action to report and repair any problems.
Record problems and corrective actions in MP2.
CLEAN EQUIPMENT AND SURROUNDING AREA.
Clean dust, oil, grease, water, etc., from the equipment and the surrounding area. Dispose of oil soaked rags, etc., properly.
RESTORE THE SYSTEM TO NORMAL STANDBY MODE.
WORKSHEET / CHECKLIST:
MAINTENANCE PERSONNEL FEEDBACK FORM
A response to the following questions is requested to incorporate any necessary changes. After the work is completed, please answer the following questions and feel free to mark-up the text as necessary.
Is the equipment barcode label number in place and correct? Yes____
No_____
If not, verify if the equipment has been replaced or if the barcode label is missing. Submit new equipment data and maintenance forms and/or replacement barcode label numbers to the facility manager.
Should the current frequency of this task be modified? If yes, why?
What is the condition of the equipment in the area work is being performed? Please note any discrepancies.
Are there any errors in the procedure text?
Should the order of any steps be changed?
Are there any safety concerns that should be addressed?
Would modifications to the work order make it easier to utilize?
Should this task or its instruction code be combined with other tasks or
Are there any steps or other useful information that you would like to be included? (i.e. special tools, part information, or helpful hints, etc.)
Is this a valid task? If not, why?
TASK START DATE:___________ TASK COMPLETION DATE:____________
TIME REQUIRED TO PERFORM TASK:___________
NAME(S)______________________________________________