ornl
Ferrite Number Predictions
for Stainless Steel Welds
Instructions:
Type in the Stainless Steel Composition press 'Calculate'.
*NOTE: In the Function Model Minimum Concentration = 0.007 wt.%. If the input
is below this limit, the program automatically assumes it to be equal to
0.007 wt.%.
Limitations:
The function fit model is fair below 18 FN
Above 18 FN the function fit estimate may be better off then WRC-1988 interpolation
Minimum concentration for all the elements allowed
are 0.007 wt.%. If it is below this limit, the program automatically assumes
it to be equal to 0.007 wt.%
The calculation will output "not computed" for out-of-bound values