FASTData January 1999 ReleaseFASTData January 1999 Release| Descriptions | |
| FDMS: | Obtaining Data |
| Documentation Abstract: |
NIST / Dupont CRADA. |
| Material: | Modacrylic 75%, Nylon 25% Fabric |
| Lab: | National Institute of Standards and Technology |
| Sponsor: | National Institute of Standards and Technology |
| Date: | 10/20/1992 |
| Test Ref No: | t5609 |
| Tested by: | Jack Lee |
| Approved by Scientific Officer: | Thomas Ohlemiller |
| Mass Lost: | 2006.85 g/m2 | Total Heat Released: | 39.123 MJ/m2 |
| Peak RHR: | 274.81 kW/m2 | Peak Mass Loss Rate: | 11.756 g/m2s |
| Units | Test Mean | 60 s | 180 s | 300 s | |
| Heat Release | kW/m2 | 118.682 | 120.415 | 164.571 | 127.331 |
| Mass Loss Rate | g/m2s | 0.00815232 | 0.00827064 | 0.00851122 | 0.0061489 |
| Heat of Combustion | MJ/kg | 17362500 | 13.178 | 18.7269 | 20.4089 |
| Specific Ext. Area | m2/kg | - | 592.744 | 587.427 | 419.478 |
| Carbon Dioxide | kg/kg | 0.903673 | 0.788443 | 1.27543 | 0.994468 |
| Carbon Monoxide | kg/kg | 0.0517681 | 0.100221 | 0.0812833 | 0.0574342 |
Flaming out time 6 minutes and 55 seconds
Re adjust time to 6minutes and 55 seconds
| Heat Flux: | 35 kW/m2 | Nominal Flow: | 24 l/s |
| Orifice Constant: | 0.0393533 | Heat per Unit Mass O2: | 12.98 J/kg |
| Heater Orientation: | H | Spark Ignitor Used: | Y |
| Grid Used: | N | Frame Used: | N |
| Conditioning: | 50 RH @ 296 K | Test Conditions: | 50 RH |
| Specimen Thickness: | - | Specimen Area: | 0.01 m2 |
| Initial Mass: | 0.0265 g | Time of Peak RHR: | 150 s |
| Final Mass: | 0.0064315 g | Peak RHR: | 274.81 kW/m2 |
| Mass Lost: | 2006.85 g/m2 | Peak Mass Loss Rate: | 11.756 g/m2s |
| Ignition Time: | 21 s | Peak Extinction Area: | 871.815 m2/kg |
| Flameout Time: | 356 s | Total Heat Released: | 39.123 MJ/m2 |
| Publication Status: | Internally reviewed report |
| Statistical Basis of Data: | Replicate data available for the same test method and test conditions |
| Material Development/ Production Status: | Material currently in production |
| Evaluation Status: | Data have been validated |
| Laboratory Accreditation Status: | The laboratory is recognized by (inter)national accreditation bodies |
| Completeness of Material Description: | Full information on material |
| Completeness of Test Procedure Description: | Standard test procedure |
