BFRL Publications - Filliben, J. J.
Filliben, J. J.
- Calibration of Thin Heat Flux Sensors for Building Applications Using ASTM C 1130.
Journal of Testing and Evaluation, Vol. 29, No. 3, 293-300, May 2001.
Zarr, R. R.; Martinez-Fuentes, V.; Filliben, J. J.; Dougherty, B. P.
- Design Gust Wind Speeds in the United States.
Journal of Structural Engineering, 1077-1080, September 1999.
Simiu, E.; Filliben, J. J.
- Extreme Wind Load Estimates Based on Gumbel Distribution of Dynamic Pressures: An Assessment.
Structural Safety, Vol. 23, No. 3, 221-228, 2001.
Simiu, E.; Heckert, N. A.; Filliben, J. J.; Johnson, S. K.
- Fire Tests of Single Office Workstations. Federal Building and Fire Safety Investigation of the World Trade Center Disaster.
NIST NCSTAR 1-5C; 130 p. September 2005.
Ohlemiller, T. J.; Mulholland, G. W.; Maranghides, A.; Filliben, J. J.; Gann, R. G.
- Fragility Curves, Damage Matrices, and Wind-Induced Loss Estimation.
Computer Simulation in Risk Analysis and Hazard Mitigation, 3rd (Third) International Conference. Proceedings. June 19-21, 2002, Sintra, Portugal, 119-126 pp, 2002.
Filliben, J. J.; Gurley, K.; Pinelli, J. P.; Simiu, E.
- Hurricane Damage Prediction Model for Residential Structures.
Journal of Structural Engineering, Vol. 130, No. 11, 1685-1691, November 2004.
Pnelli, J. P.; Simiu, E.; Gurley, K.; Subramanian, C.; Zhang, L.; Cope, A.; Filliben, J. J.; Hamid, S.
- International Comparison of Guarded Hot Plate Apparatus Using National and Regional Reference Materials.
NIST TN 1444; 87 p. May 2002.
Zarr, R. R.; Filliben, J. J.
- International Study of Guarded Hot Plate Laboratories Using Fibrous Glass and Expanded Polystyrene Reference Materials.
Insulation Materials: Testing and Applications. Volume 4. ASTM STP 1426. 2002, ASTM International, West Conshohocken, PA, Desjarlais, A. O.; Zarr, R. R., Editor(s)(s), 3-16 pp, 2003.
Zarr, R. R.; Filliben, J. J.
- International Study of Guarded Hot Plate Laboratories Using Fibrous Glass and Expanded Polystyrene Reference Materials.
Insulation Materials: Testing and Applications. Volume 4. ASTM STP 1426. 2002, ASTM International, West Conshohocken, PA, Desjarlais, A. O.; Zarr, R. R., Editor(s)(s), 3-16 pp, 2003.
Zarr, R. R.; Filliben, J. J.
- Performance of Tape-Bonded Seams of EPDM Membranes: Effect of Material and Application Factors on Peel Creep-Rupture Response.
NIST BSS 176; 59 p. May 1997.
Rossiter, W. J., Jr.; Vangel, M. G.; Kraft, K. M.; Filliben, J. J.
Building and Fire Research Laboratory
National Institute of Standards and Technology
Gaithersburg, MD 20899