! Started logfile: J1607+8502_X_2006_02_14_yyk_uvs.log on Wed Jul 5 12:52:46 2006 obs J1607+8502_X_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J1607+8502_X_2006_02_14_yyk_uva.fits ! AN table 1: 874 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.382024 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1607+8502 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2304 lines of history. ! ! Reading 60100 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1607+8502_X_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0864589 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.236 mas, bmaj=2.839 mas, bpa=-3.655 degrees ! Estimated noise=1.31232 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0354245 Jy ! Component: 100 - total flux cleaned = 0.0534679 Jy ! Total flux subtracted in 100 components = 0.0534679 Jy ! Clean residual min=-0.006788 max=0.007112 Jy/beam ! Clean residual mean=0.000029 rms=0.002376 Jy/beam ! Combined flux in latest and established models = 0.0534679 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0534679 Jy ! ! Correcting IF 1. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 112 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.069712Jy sigma=1.628571 ! Fit after self-cal, rms=0.069672Jy sigma=1.623427 ! Inverting map and beam ! Estimated beam: bmin=1.236 mas, bmaj=2.839 mas, bpa=-3.655 degrees ! Estimated noise=1.31232 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.154 mas, bmaj=2.992 mas, bpa=1.069 degrees ! Estimated noise=0.735348 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00916261 Jy ! Component: 100 - total flux cleaned = 0.0151843 Jy ! Component: 150 - total flux cleaned = 0.0195181 Jy ! Component: 200 - total flux cleaned = 0.022195 Jy ! Total flux subtracted in 200 components = 0.022195 Jy ! Clean residual min=-0.002004 max=0.002001 Jy/beam ! Clean residual mean=-0.000000 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.0756629 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 53 model components to the UV plane model. ! The established model now contains 71 components and 0.0756629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066939Jy sigma=1.559837 ! Fit after self-cal, rms=0.066931Jy sigma=1.559441 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.154 x 2.992 at 1.069 degrees (North through East) ! Clean map min=-0.0025882 max=0.028579 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.0171 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 1.11 KP 0.90 ! LA 0.89 MK 1.00* NL 0.99 OV 1.00 ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.02731 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.87 HN 1.00* KP 0.86 ! LA 0.92 MK 1.00* NL 0.94 OV 1.11 ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.066931Jy sigma=1.559441 ! Fit after self-cal, rms=0.066315Jy sigma=1.565644 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066315Jy sigma=1.565644 ! Fit after self-cal, rms=0.066316Jy sigma=1.565634 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.183 mas, bmaj=2.952 mas, bpa=2.341 degrees ! Estimated noise=0.74053 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000865558 Jy ! Component: 100 - total flux cleaned = -0.000644201 Jy ! Component: 150 - total flux cleaned = -0.000520652 Jy ! Component: 200 - total flux cleaned = -0.000322677 Jy ! Total flux subtracted in 200 components = -0.000322676 Jy ! Clean residual min=-0.001088 max=0.001095 Jy/beam ! Clean residual mean=0.000001 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.0753403 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 54 model components to the UV plane model. ! The established model now contains 124 components and 0.0753403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065810Jy sigma=1.553766 ! Fit after self-cal, rms=0.065801Jy sigma=1.553637 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065801Jy sigma=1.553637 ! Fit after self-cal, rms=0.050960Jy sigma=1.191017 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161514 Jy ! Component: 100 - total flux cleaned = 0.0211905 Jy ! Component: 150 - total flux cleaned = 0.0233296 Jy ! Component: 200 - total flux cleaned = 0.0248271 Jy ! Total flux subtracted in 200 components = 0.0248271 Jy ! Clean residual min=-0.003238 max=0.003087 Jy/beam ! Clean residual mean=0.000016 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 0.100167 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 146 components and 0.100167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.045244Jy sigma=0.985742 ! Fit after self-cal, rms=0.043042Jy sigma=0.944453 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.183 x 2.952 at 2.341 degrees (North through East) ! Clean map min=-0.0034578 max=0.044591 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.653 mas, bmaj=3.194 mas, bpa=17.52 degrees ! Estimated noise=0.854157 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100466 Jy ! Component: 100 - total flux cleaned = -0.0010394 Jy ! Component: 150 - total flux cleaned = -0.00120939 Jy ! Component: 200 - total flux cleaned = -0.00135642 Jy ! Total flux subtracted in 200 components = -0.00135642 Jy ! Clean residual min=-0.003154 max=0.003387 Jy/beam ! Clean residual mean=0.000029 rms=0.001065 Jy/beam ! Combined flux in latest and established models = 0.098811 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 173 components and 0.098811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.042770Jy sigma=0.936591 ! Fit after self-cal, rms=0.042587Jy sigma=0.932397 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.255 mas, bmaj=2.824 mas, bpa=-3.374 degrees ! Estimated noise=1.31556 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0520277 Jy ! Component: 100 - total flux cleaned = 0.0742522 Jy ! Component: 150 - total flux cleaned = 0.0856667 Jy ! Component: 200 - total flux cleaned = 0.0908468 Jy ! Total flux subtracted in 200 components = 0.0908468 Jy ! Clean residual min=-0.005312 max=0.004180 Jy/beam ! Clean residual mean=0.000035 rms=0.001400 Jy/beam ! Combined flux in latest and established models = 0.0908468 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0908468 Jy ! Inverting map and beam ! Estimated beam: bmin=1.183 mas, bmaj=2.952 mas, bpa=2.341 degrees ! Estimated noise=0.74053 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00344799 Jy ! Component: 100 - total flux cleaned = 0.00494699 Jy ! Component: 150 - total flux cleaned = 0.00566437 Jy ! Component: 200 - total flux cleaned = 0.006004 Jy ! Total flux subtracted in 200 components = 0.006004 Jy ! Clean residual min=-0.002391 max=0.002177 Jy/beam ! Clean residual mean=0.000012 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.0968508 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 70 components and 0.0968508 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.653 mas, bmaj=3.194 mas, bpa=17.52 degrees ! Estimated noise=0.854157 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -4.56592e-05 Jy ! Component: 100 - total flux cleaned = 0.000147834 Jy ! Component: 150 - total flux cleaned = 0.000298865 Jy ! Component: 200 - total flux cleaned = 0.000485925 Jy ! Total flux subtracted in 200 components = 0.000485925 Jy ! Clean residual min=-0.002620 max=0.002727 Jy/beam ! Clean residual mean=0.000020 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.0973367 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 90 components and 0.0973367 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.183 mas, bmaj=2.952 mas, bpa=2.341 degrees ! Estimated noise=0.74053 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107406 Jy ! Component: 100 - total flux cleaned = -0.000936843 Jy ! Component: 150 - total flux cleaned = -0.000862707 Jy ! Component: 200 - total flux cleaned = -0.0005933 Jy ! Total flux subtracted in 200 components = -0.0005933 Jy ! Clean residual min=-0.002252 max=0.002159 Jy/beam ! Clean residual mean=0.000011 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.0967434 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 121 components and 0.0967434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.042085Jy sigma=0.923277 ! Fit after self-cal, rms=0.041811Jy sigma=0.919436 wmodel J1607+8502_X_2006_02_14_yyk\_map.mod ! Writing 121 model components to file: J1607+8502_X_2006_02_14_yyk_map.mod wobs J1607+8502_X_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J1607+8502_X_2006_02_14_yyk_uvs.fits wwins J1607+8502_X_2006_02_14_yyk\_map.win ! wwins: Wrote 1 windows to J1607+8502_X_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000192417 Jy ! Component: 100 - total flux cleaned = 0.000397021 Jy ! Component: 150 - total flux cleaned = 0.00061695 Jy ! Component: 200 - total flux cleaned = 0.00070531 Jy ! Component: 250 - total flux cleaned = 0.000650683 Jy ! Component: 300 - total flux cleaned = 0.000676185 Jy ! Component: 350 - total flux cleaned = 0.00062742 Jy ! Component: 400 - total flux cleaned = 0.000512682 Jy ! Component: 450 - total flux cleaned = 0.000424324 Jy ! Component: 500 - total flux cleaned = 0.000403357 Jy ! Component: 550 - total flux cleaned = 0.000403425 Jy ! Component: 600 - total flux cleaned = 0.000304905 Jy ! Component: 650 - total flux cleaned = 0.000171809 Jy ! Component: 700 - total flux cleaned = 2.36554e-05 Jy ! Component: 750 - total flux cleaned = -0.000120428 Jy ! Component: 800 - total flux cleaned = -0.000295229 Jy ! Component: 850 - total flux cleaned = -0.000431525 Jy ! Component: 900 - total flux cleaned = -0.000564791 Jy ! Component: 950 - total flux cleaned = -0.000711307 Jy ! Component: 1000 - total flux cleaned = -0.000870419 Jy ! Component: 1050 - total flux cleaned = -0.00101017 Jy ! Component: 1100 - total flux cleaned = -0.00116198 Jy ! Component: 1150 - total flux cleaned = -0.00128098 Jy ! Component: 1200 - total flux cleaned = -0.00132477 Jy ! Component: 1250 - total flux cleaned = -0.00139674 Jy ! Component: 1300 - total flux cleaned = -0.00139662 Jy ! Component: 1350 - total flux cleaned = -0.00141062 Jy ! Component: 1400 - total flux cleaned = -0.00141035 Jy ! Component: 1450 - total flux cleaned = -0.00143759 Jy ! Component: 1500 - total flux cleaned = -0.0014373 Jy ! Component: 1550 - total flux cleaned = -0.00142375 Jy ! Component: 1600 - total flux cleaned = -0.00142392 Jy ! Component: 1650 - total flux cleaned = -0.00141069 Jy ! Component: 1700 - total flux cleaned = -0.00137177 Jy ! Component: 1750 - total flux cleaned = -0.00134613 Jy ! Component: 1800 - total flux cleaned = -0.00128238 Jy ! Component: 1850 - total flux cleaned = -0.00124461 Jy ! Component: 1900 - total flux cleaned = -0.00121953 Jy ! Component: 1950 - total flux cleaned = -0.00116989 Jy ! Component: 2000 - total flux cleaned = -0.00114519 Jy ! Total flux subtracted in 2048 components = -0.00108397 Jy ! Clean residual min=-0.000713 max=0.000664 Jy/beam ! Clean residual mean=0.000000 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.0956594 Jy keep ! Adding 119 model components to the UV plane model. ! The established model now contains 240 components and 0.0956594 Jy ![Exited script file: muppet] wmap "J1607+8502_X_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.183 x 2.952 at 2.341 degrees (North through East) ! Clean map min=-0.0020307 max=0.051089 Jy/beam ! Writing clean map to FITS file: J1607+8502_X_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0510891 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0002078 device "J1607+8502_X_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J1607+8502_X_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.22022 1.22022 2.44044 4.88088 9.76176 19.5235 39.047 78.0941 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.051 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.183 x 2.952 at 2.341 degrees (North through East) ! Clean map min=-0.0020307 max=0.051089 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1607+8502_X_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J1607+8502_X_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1607+8502_X_2006_02_14_yyk_uvs.log closed on Wed Jul 5 12:53:29 2006