Mechanical Behavior of Advanced Materials Publications

(Oct. 2006 – Sep. 2007)

J.W. Ager

D. T. Jiang, K. Thomson, J. D. Kuntz, J. W. Ager and A. K. Mukherjee, "Effect of Sintering Temperature on a Single-Wall Carbon Nanotube-Toughened Alumina-Based Nanocomposite", Scripta Materialia 56 (11), 959-962 (2007).

L. De Jonghe

J. Jason Nicholas, and Craig P. Jacobson, "Sintering of Solid Oxide Fuel Cell Materials", Advances in Science and Technology 45, 549 (2007).
C. S. Lee, S. H. Ahn, L. C. DeJonghe and G. Thomas, "Effect of Functionally Graded Material (Fgm) Layers on the Residual Stress of Polytypoidally Joined Si3n4-Al2o3", Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 434 (1-2), 160-165 (2006).
C. S. Lee, S. G. Kim, S. H. Ahn, L. C. DeJonghe and G. Thomas, "Three Dimensional Analysis of Thermal Stress and Prediction of Failure of Polytypoidally Joined Si3n4-Al2o3 Functionally Graded Material (Fgm)", Materials Transactions 48 (9), 2489-2493 (2007).
R. Yu, L.C. De Jonghe, and R.O. Ritchie, "Elastic Constants and Tensile Properties of Al2oc by Density Functional Calculations", Phys.Rev. B 75, 104114 (2007).

P.Y. Hou

P. Y. Hou, A. P. Paulikas, B. W. Veal and J. L. Smialek, "Thermally Grown Al2o3 on a H-2-Annealed Fe3al Alloy: Stress Evolution and Film Adhesion", Acta Materialia 55 (16), 5601-5613 (2007).
M. S. Li and P. Y. Hou, "Improved Cr2o3 Adhesion by Ce Ion Implantation in the Presence of Interfacial Sulfur Segregation", Acta Materialia 55 (2), 443-453 (2007).
R. Molins and P. Y. Hou, "Characterization of Chemical and Microstructural Evolutions of a Niptal Bondcoat During High Temperature Oxidation", Surface & Coatings Technology 201 (7), 3841-3845 (2006).
R. Molins, I. Rouzou and P. Hou, "A Tem Study of Sulfur Distribution in Oxidized Ni40al and Its Effect on Oxide Growth and Adherence", Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 454, 80-88 (2007).
P. Y. Hou, "Strains in Thermally Grown Alumina Films Measured Using in-Situ Synchrotron X-Rays", Mater. Sci. Forum., 522-523, 433-440, (2006), 522-523, 433-440 (2006).
B. W. Veal, A. P. Paulikas and P. Y. Hou, "Creep in Protective Alpha-Al2o3 Thermally Grown on Beta-Nial", Applied Physics Letters 90 (12), 121914 (2007).
R. Yu and P. Y. Hou, "First-Principles Calculations of the Effect of Pt on Nial Surface Energy and the Site Preference of Pt", Applied Physics Letters 91 (1), 011907 (2007).
Z. G. Zhang, P. Y. Hou, F. Gesmundo and Y. Niu, "Effect of Surface Roughness on the Development of Protective Al2o3 on Fe-10al (At.%) Alloys Containing 0-10 At.% Cr", Applied Surface Science 253 (2), 881-888 (2006).

R.O. Ritchie

D. H. Alsem, O. N. Pierron, E. A. Stach, C. L. Muhlstein and R. O. Ritchie, "Mechanisms for Fatigue of Micron-Scale Silicon Structural Films", Advanced Engineering Materials 9 (1-2), 15-30 (2007).
D. H. Alsem, E. A. Stach, M. T. Dugger, M. Enachescu and R. O. Ritchie, "An Electron Microscopy Study of Wear in Polysilicon Microelectromechanical Systems in Ambient Air", Thin Solid Films 515 (6), 3259-3266 (2007).
D. H. Alsem, R. Timmerman, B. L. Boyce, E. A. Stach, J. T. M. De Hosson and R. O. Ritchie, "Very High-Cycle Fatigue Failure in Micron-Scale Polycrystalline Silicon Films: Effects of Environment and Surface Oxide Thickness", Journal of Applied Physics 101 (1), 013515 (2007).
J. C. Card, R. M. Cannon, E. Saiz, A. P. Tomsia and R. O. Ritchie, "On the Physics of Moisture-Induced Cracking in Metal-Glass (Copper-Silica) Interfaces", Journal of Applied Physics 102 (5), 053516 (2007).
J. W. Foulk, R. M. Cannon, G. C. Johnson, P. A. Klein and R. O. Ritchie, "A Micromechanical Basis for Partitioning the Evolution of Grain Bridging in Brittle Materials", Journal of the Mechanics and Physics of Solids 55 (4), 719-743 (2007).
R. Yu, X. F. Zhang, L. C. De Jonghe and R. O. Ritchie, "Elastic Constants and Tensile Properties of Al2oc by Density Functional Calculations", Physical Review B 75 (10), 104114 (2007).

E. Saiz

A. Gauffier, A. P. Tomsia, P. Y. Hou, "The Wetting Behavior of Nial and Niptal on Polycrystalline Alumina", Journal of Materials Science 42, 9524 (2007).
S. Deville, E. Saiz and A. P. Tomsia, "Ice-Templated Porous Alumina Structures", Acta Materialia 55 (6), 1965-1974 (2007).
J. C. Card, R. M. Cannon, E. Saiz, A. P. Tomsia and R. O. Ritchie, "On the Physics of Moisture-Induced Cracking in Metal-Glass (Copper-Silica) Interfaces", Journal of Applied Physics 102 (5), 053516 (2007).
E. Saiz, N. Rauch, N., C. Scheu, M. Ruehle, M. Benhassine, D. Seveno, J. De Coninck, J., S. Lopez-Esteban, "Nonreactive Spreading at High Temperature: Molten Metals and Oxides on Molybdenum", Physical Review E 76, 041602 (2007).
L. Gremillard, E. Saiz, V. R. Radmilovic and A. P. Tomsia, "Role of Titanium on the Reactive Spreading of Lead-Free Solders on Alumina", Journal of Materials Research 21 (12), 3222-3233 (2006).

A.P. Tomsia

S. Deville, E. Saiz and A. P. Tomsia, "Ice-Templated Porous Alumina Structures", Acta Materialia 55 (6), 1965-1974 (2007).
A. Gauffier, A. P. Tomsia, P. Y. Hou, "The Wetting Behavior of Nial and Niptal on Polycrystalline Alumina", Journal of Materials Science, 42 (9524) 42, 9524 (2007).
J. C. Card, R. M. Cannon, E. Saiz, A. P. Tomsia and R. O. Ritchie, "On the Physics of Moisture-Induced Cracking in Metal-Glass (Copper-Silica) Interfaces", Journal of Applied Physics 102 (5), 053516 (2007).
L. Gremillard, E. Saiz, V. R. Radmilovic and A. P. Tomsia, "Role of Titanium on the Reactive Spreading of Lead-Free Solders on Alumina", Journal of Materials Research 21 (12), 3222-3233 (2006).

Laboratory Directed Research and Development

R.O. Ritchie
Aging, Disease and the Mechanical Response of Biological Tissues, Specifically Human Bone 

J. W. Ager, R. K. Nalla, G. Balooch, G. Kim, M. Pugach, S. Habelitz, G. W. Marshall, J. H. Kinney and R. O. Ritchie, "On the Increasing Fragility of Human Teeth with Age: A Deep-Uv Resonance Raman Study", Journal of Bone and Mineral Research 21 (12), 1879-1887 (2006).
J. J. Kruzic and R. O. Ritchie, "Kitagawa-Takahashi Diagrams Define the Limiting Conditions for Cyclic Fatigue Failure in Human Dentin", Journal of Biomedical Materials Research Part A 79A (3), 747-751 (2006).
R. O. Ritchie, R. K. Nalla, J. J. Kruzic, J. W. Ager, G. Balooch and J. H. Kinney, "Fracture and Ageing in Bone: Toughness and Structural Characterization", Strain 42 (4), 225-232 (2006).
R. K. Nalla, J. H. Kinney, A. P. Tomsia and R. O. Ritchie, "Role of Alcohol in the Fracture Resistance of Teeth", Journal of Dental Research 85 (11), 1022-1026 (2006).
R. K. Nalla, A. E. Porter, C. Dariao, A. M. Minor, V. Radmilovic, E. A. Stach, A. P. Tomsia and R. O. Ritchie, "Ultrastructural Examination of Dentin Using Focused Ion-Beam Cross-Sectioning and Transmission Electron Microscopy (Vol 36, Pg 672, 2005)", Micron 38 (7), 771-771 (2007).

J. Ager
Aging, Disease and the Mechanical Response of Biological Tissues, Specifically Human Bone 

R. O. Ritchie, R. K. Nalla, J. J. Kruzic, J. W. Ager, G. Balooch and J. H. Kinney, "Fracture and Ageing in Bone: Toughness and Structural Characterization", Strain 42 (4), 225-232 (2006).

Non-DOE

E. Saiz
NIH -  Complex Nanocomposites for Bone Regeneration

A. P. Tomsia, S. Deville., "Artificial Bone and Teeth through Controlled Ice Growth in Colloidal Suspensions", AIP Conference Proceedings 916, 560 (2007).
A. P. Tomsia, S. Deville, "Artificial Bone and Teeth through Controlled Ice Growth in Colloidal Suspensions", Perspectives on Inorganic, Organic, and Biological Crystal Growth: From Fundamentals to Applications 30 (2007).
D. Zhao, E. Saiz, A. P. Tomsia, "Hydrogel-Based Bone Replacement Material", Polymeric Materials: Science & Engineering 97, 753 (2007).
S. Deville, E. Saiz and A. P. Tomsia, "Freeze Casting of Hydroxyapatite Scaffolds for Bone Tissue Engineering", Biomaterials 27 (32), 5480-5489 (2006).
J. Russias, S. Deville, K. Gryn, G. Liu, R. K. Nalla, A. P.Tomsia, "Fabrication and in Vitro Characterization of Three-Dimensional Organic/Inorganic Scaffolds by Robocasting", Journal of Biomedical Materials Research Part A 83, 434.
P. Miranda, E. Saiz, A. P. Tomsia, F. Guiberteau, "Fracture Modes under Uniaxial Compression in Hydroxyapatite Scaffolds Fabricated by Robocasting", Journal of Biomedical Materials Research Part A 83, 646.
S. Deville, A. P. Tomsia, "Using Ice to Mimic Nacre: From Structural Applications to Artificial Bone", Handbook of Biomineralization 173 (2007).
S. Deville, E. Saiz, E., A. P. Tomsia, "Fabrication of Porous Hydroxyapatite Scaffolds", Proceedings of the International Conference on Manufacturing Science and Engineering  (2006).
E. Saiz, L. Gremillard, G. Menendez, P. Miranda, K. Gryn and A. P. Tomsia, "Preparation of Porous Hydroxyapatite Scaffolds", Materials Science & Engineering C-Biomimetic and Supramolecular Systems 27 (3), 546-550 (2007).
V. G. Varanasi, P. M. Loomer, E. Saiz, A. P. Tomsia, S. J. Marshall, G. W. Marshall., "Improving Biomaterials from a Cellular Point of View", Materials Research Society Symposium Proceedings 13 (2007).

A.P. Tomsia
NIH -  Complex Nanocomposites for Bone Regeneration

A. P. Tomsia, S. Deville., "Artificial Bone and Teeth through Controlled Ice Growth in Colloidal Suspensions", AIP Conference Proceedings 916, 560 (2007).
A. P. Tomsia, S. Deville, "Artificial Bone and Teeth through Controlled Ice Growth in Colloidal Suspensions", Perspectives on Inorganic, Organic, and Biological Crystal Growth: From Fundamentals to Applications (30) 30 (2007).
D. Zhao, E. Saiz, A. P. Tomsia, "Hydrogel-Based Bone Replacement Material", Polymeric Materials: Science & Engineering, 97 (753) 97, 753 (2007).
S. Deville, E. Saiz and A. P. Tomsia, "Freeze Casting of Hydroxyapatite Scaffolds for Bone Tissue Engineering", Biomaterials 27 (32), 5480-5489 (2006).
J. Russias, S. Deville, K. Gryn, G. Liu, R. K. Nalla, A. P.Tomsia, "Fabrication and in Vitro Characterization of Three-Dimensional Organic/Inorganic Scaffolds by Robocasting", Journal of Biomedical Materials Research Part A 83, 434 (2007).
R. K. Nalla, J. H. Kinney, A. P. Tomsia and R. O. Ritchie, "Role of Alcohol in the Fracture Resistance of Teeth", Journal of Dental Research 85 (11), 1022-1026 (2006).
R. K. Nalla, A. E. Porter, C. Dariao, A. M. Minor, V. Radmilovic, E. A. Stach, A. P. Tomsia and R. O. Ritchie, "Ultrastructural Examination of Dentin Using Focused Ion-Beam Cross-Sectioning and Transmission Electron Microscopy (Vol 36, Pg 672, 2005)", Micron 38 (7), 771-771 (2007).
P. Miranda, E. Saiz, A. P. Tomsia, F. Guiberteau, "Fracture Modes under Uniaxial Compression in Hydroxyapatite Scaffolds Fabricated by Robocasting", Journal of Biomedical Materials Research Part A, 83 (646) 83, 646 (2007).
S. Deville, A. P. Tomsia, "Using Ice to Mimic Nacre: From Structural Applications to Artificial Bone", Handbook of Biomineralization 173 (2007).
E. Saiz, L. Gremillard, G. Menendez, P. Miranda, K. Gryn and A. P. Tomsia, "Preparation of Porous Hydroxyapatite Scaffolds", Materials Science & Engineering C-Biomimetic and Supramolecular Systems 27 (3), 546-550 (2007).
V. G. Varanasi, P. M. Loomer, E. Saiz, A. P. Tomsia, S. J. Marshall, G. W. Marshall., "Improving Biomaterials from a Cellular Point of View", Materials Research Society Symposium Proceedings, (13) 13 (2007).
S. Deville, E. Saiz, E., A. P. Tomsia, "Fabrication of Porous Hydroxyapatite Scaffolds", Proceedings of the International Conference on Manufacturing Science and Engineering  (2006).

E. Saiz
NIH -  Graded Bioactive Coatings for Implants

D. R. Bloyer, R.M. Cannon, E. Saiz, A. P. Tomsia, R. O. Ritchie, "Stress-Corrosion Crack Growth of Si-Na-K-Mg-Ca-P-O Bioactive Glasses in Simulated Human Physiological Environment", Biomaterials 28 (4901) 28, 4901 (2007).
S. Foppiano, S. J. Marshall, G. W. Marshall, E. Saiz and A. P. Tomsia, "Bioactive Glass Coatings Affect the Behavior of Osteoblast-Like Cells", Acta Biomaterialia 3 (5), 765-771 (2007).

A. Tomsia
NIH -  Graded Bioactive Coatings for Implants

D. R. Bloyer, R.M. Cannon, E. Saiz, A. P. Tomsia, R. O. Ritchie, "Stress-Corrosion Crack Growth of Si-Na-K-Mg-Ca-P-O Bioactive Glasses in Simulated Human Physiological Environment", Biomaterials 28, 4901 (2007).
S. Foppiano, S. J. Marshall, G. W. Marshall, E. Saiz and A. P. Tomsia, "Bioactive Glass Coatings Affect the Behavior of Osteoblast-Like Cells", Acta Biomaterialia 3 (5), 765-771 (2007).