! Started logfile: J0750+8241_S_2006_02_14_yyk_uvs.log on Wed Jul 5 11:41:50 2006 obs J0750+8241_S_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J0750+8241_S_2006_02_14_yyk_uva.fits ! AN table 1: 873 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.878325 visibilities/baseline/integration-bin. ! Found source: J0750+8241 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2686 lines of history. ! ! Reading 138020 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0750+8241_S_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.636314 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.388 mas, bmaj=10.19 mas, bpa=10.48 degrees ! Estimated noise=1.38814 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.499891 Jy ! Component: 100 - total flux cleaned = 0.617101 Jy ! Total flux subtracted in 100 components = 0.617101 Jy ! Clean residual min=-0.026073 max=0.035809 Jy/beam ! Clean residual mean=-0.000008 rms=0.008300 Jy/beam ! Combined flux in latest and established models = 0.617101 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.617101 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.161281Jy sigma=2.505055 ! Fit after self-cal, rms=0.160339Jy sigma=2.486195 ! Inverting map and beam ! Estimated beam: bmin=2.388 mas, bmaj=10.19 mas, bpa=10.48 degrees ! Estimated noise=1.38814 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.097 mas, bmaj=10.5 mas, bpa=10.23 degrees ! Estimated noise=0.761648 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0658869 Jy ! Component: 100 - total flux cleaned = 0.100144 Jy ! Component: 150 - total flux cleaned = 0.120019 Jy ! Component: 200 - total flux cleaned = 0.132171 Jy ! Total flux subtracted in 200 components = 0.132171 Jy ! Clean residual min=-0.019041 max=0.025790 Jy/beam ! Clean residual mean=-0.000406 rms=0.005677 Jy/beam ! Combined flux in latest and established models = 0.749272 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 55 components and 0.749272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134833Jy sigma=2.059737 ! Fit after self-cal, rms=0.133843Jy sigma=2.046758 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.097 x 10.5 at 10.23 degrees (North through East) ! Clean map min=-0.017677 max=0.59091 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01253 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.00 KP 0.92 ! LA 1.17 MK 0.89 NL 0.91 OV 1.04 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.992819 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 1.02 KP 0.94 ! LA 1.13 MK 0.99 NL 0.92 OV 1.06 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.985859 ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.03 HN 1.05 KP 0.95 ! LA 0.91 MK 1.08 NL 1.03 OV 1.10 ! PT 1.05 SC 1.06 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03651 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.05 HN 0.96 KP 0.87 ! LA 0.76 MK 1.08 NL 0.94 OV 0.91 ! PT 0.92 SC 1.14 ! ! ! Fit before self-cal, rms=0.133843Jy sigma=2.046758 ! Fit after self-cal, rms=0.110783Jy sigma=1.686278 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110783Jy sigma=1.686278 ! Fit after self-cal, rms=0.110799Jy sigma=1.686150 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.167 mas, bmaj=10.45 mas, bpa=10.24 degrees ! Estimated noise=0.762145 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, 19). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0279504 Jy ! Component: 100 - total flux cleaned = 0.0419382 Jy ! Component: 150 - total flux cleaned = 0.0509034 Jy ! Component: 200 - total flux cleaned = 0.05546 Jy ! Total flux subtracted in 200 components = 0.05546 Jy ! Clean residual min=-0.005786 max=0.007882 Jy/beam ! Clean residual mean=-0.000052 rms=0.001869 Jy/beam ! Combined flux in latest and established models = 0.804732 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 43 model components to the UV plane model. ! The established model now contains 93 components and 0.804732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105772Jy sigma=1.577466 ! Fit after self-cal, rms=0.105449Jy sigma=1.573714 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105449Jy sigma=1.573714 ! Fit after self-cal, rms=0.077278Jy sigma=1.175211 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000693294 Jy ! Component: 100 - total flux cleaned = 0.0022023 Jy ! Component: 150 - total flux cleaned = 0.00305115 Jy ! Component: 200 - total flux cleaned = 0.00359521 Jy ! Total flux subtracted in 200 components = 0.00359521 Jy ! Clean residual min=-0.005069 max=0.005462 Jy/beam ! Clean residual mean=-0.000050 rms=0.001543 Jy/beam ! Combined flux in latest and established models = 0.808327 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 122 components and 0.808327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075870Jy sigma=1.154075 ! Fit after self-cal, rms=0.075616Jy sigma=1.149592 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.167 x 10.45 at 10.24 degrees (North through East) ! Clean map min=-0.0049144 max=0.60241 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075616Jy sigma=1.149592 ! Fit after self-cal, rms=0.070197Jy sigma=1.063703 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070197Jy sigma=1.063703 ! Fit after self-cal, rms=0.070187Jy sigma=1.063356 ! Inverting map and beam ! Estimated beam: bmin=3.159 mas, bmaj=10.44 mas, bpa=10.03 degrees ! Estimated noise=0.758508 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00590666 Jy ! Component: 100 - total flux cleaned = 0.00810497 Jy ! Component: 150 - total flux cleaned = 0.00880968 Jy ! Component: 200 - total flux cleaned = 0.00909598 Jy ! Total flux subtracted in 200 components = 0.00909598 Jy ! Clean residual min=-0.004275 max=0.003808 Jy/beam ! Clean residual mean=-0.000038 rms=0.001192 Jy/beam ! Combined flux in latest and established models = 0.817423 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 153 components and 0.817423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069786Jy sigma=1.053612 ! Fit after self-cal, rms=0.069750Jy sigma=1.052867 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069750Jy sigma=1.052867 ! Fit after self-cal, rms=0.064273Jy sigma=0.943239 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064273Jy sigma=0.943239 ! Fit after self-cal, rms=0.064275Jy sigma=0.943205 ! Inverting map and beam ! Estimated beam: bmin=3.163 mas, bmaj=10.43 mas, bpa=9.984 degrees ! Estimated noise=0.758345 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00306589 Jy ! Component: 100 - total flux cleaned = 0.00410001 Jy ! Component: 150 - total flux cleaned = 0.00484874 Jy ! Component: 200 - total flux cleaned = 0.00497589 Jy ! Total flux subtracted in 200 components = 0.00497589 Jy ! Clean residual min=-0.003962 max=0.003165 Jy/beam ! Clean residual mean=-0.000037 rms=0.001003 Jy/beam ! Combined flux in latest and established models = 0.822399 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 178 components and 0.822399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064128Jy sigma=0.938982 ! Fit after self-cal, rms=0.064111Jy sigma=0.938540 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.705 mas, bmaj=12.15 mas, bpa=13.76 degrees ! Estimated noise=0.967305 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000224248 Jy ! Component: 100 - total flux cleaned = 0.000298653 Jy ! Component: 150 - total flux cleaned = 0.000298118 Jy ! Component: 200 - total flux cleaned = 0.0002426 Jy ! Total flux subtracted in 200 components = 0.0002426 Jy ! Clean residual min=-0.003806 max=0.003311 Jy/beam ! Clean residual mean=-0.000080 rms=0.001264 Jy/beam ! Combined flux in latest and established models = 0.822642 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 205 components and 0.822642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064084Jy sigma=0.937479 ! Fit after self-cal, rms=0.064074Jy sigma=0.937320 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.413 mas, bmaj=10.16 mas, bpa=10.45 degrees ! Estimated noise=1.37723 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.499699 Jy ! Component: 100 - total flux cleaned = 0.617601 Jy ! Component: 150 - total flux cleaned = 0.669148 Jy ! Component: 200 - total flux cleaned = 0.70256 Jy ! Total flux subtracted in 200 components = 0.70256 Jy ! Clean residual min=-0.009927 max=0.013956 Jy/beam ! Clean residual mean=0.000034 rms=0.003790 Jy/beam ! Combined flux in latest and established models = 0.70256 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.70256 Jy ! Inverting map and beam ! Estimated beam: bmin=3.163 mas, bmaj=10.43 mas, bpa=9.984 degrees ! Estimated noise=0.758345 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.035691 Jy ! Component: 100 - total flux cleaned = 0.0588438 Jy ! Component: 150 - total flux cleaned = 0.0746625 Jy ! Component: 200 - total flux cleaned = 0.0860077 Jy ! Total flux subtracted in 200 components = 0.0860077 Jy ! Clean residual min=-0.006026 max=0.005459 Jy/beam ! Clean residual mean=-0.000051 rms=0.001914 Jy/beam ! Combined flux in latest and established models = 0.788567 Jy ! Adding 87 model components to the UV plane model. ! The established model now contains 119 components and 0.788567 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.705 mas, bmaj=12.15 mas, bpa=13.76 degrees ! Estimated noise=0.967305 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142657 Jy ! Component: 100 - total flux cleaned = 0.0224687 Jy ! Component: 150 - total flux cleaned = 0.0275287 Jy ! Component: 200 - total flux cleaned = 0.0302138 Jy ! Total flux subtracted in 200 components = 0.0302138 Jy ! Clean residual min=-0.004782 max=0.003436 Jy/beam ! Clean residual mean=-0.000081 rms=0.001365 Jy/beam ! Combined flux in latest and established models = 0.818781 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 193 components and 0.818781 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.163 mas, bmaj=10.43 mas, bpa=9.984 degrees ! Estimated noise=0.758345 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193751 Jy ! Component: 100 - total flux cleaned = 0.00337488 Jy ! Component: 150 - total flux cleaned = 0.00418453 Jy ! Component: 200 - total flux cleaned = 0.0042563 Jy ! Total flux subtracted in 200 components = 0.0042563 Jy ! Clean residual min=-0.003638 max=0.003061 Jy/beam ! Clean residual mean=-0.000035 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 0.823037 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 218 components and 0.823037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064211Jy sigma=0.940025 ! Fit after self-cal, rms=0.064140Jy sigma=0.939203 wmodel J0750+8241_S_2006_02_14_yyk\_map.mod ! Writing 218 model components to file: J0750+8241_S_2006_02_14_yyk_map.mod wobs J0750+8241_S_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J0750+8241_S_2006_02_14_yyk_uvs.fits wwins J0750+8241_S_2006_02_14_yyk\_map.win ! wwins: Wrote 2 windows to J0750+8241_S_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0013717 Jy ! Component: 100 - total flux cleaned = -0.00214556 Jy ! Component: 150 - total flux cleaned = -0.00260786 Jy ! Component: 200 - total flux cleaned = -0.00299259 Jy ! Component: 250 - total flux cleaned = -0.00326725 Jy ! Component: 300 - total flux cleaned = -0.00339929 Jy ! Component: 350 - total flux cleaned = -0.00356755 Jy ! Component: 400 - total flux cleaned = -0.00360877 Jy ! Component: 450 - total flux cleaned = -0.00380582 Jy ! Component: 500 - total flux cleaned = -0.00369158 Jy ! Component: 550 - total flux cleaned = -0.00369217 Jy ! Component: 600 - total flux cleaned = -0.00362086 Jy ! Component: 650 - total flux cleaned = -0.00358638 Jy ! Component: 700 - total flux cleaned = -0.00348555 Jy ! Component: 750 - total flux cleaned = -0.00338695 Jy ! Component: 800 - total flux cleaned = -0.0034194 Jy ! Component: 850 - total flux cleaned = -0.00332336 Jy ! Component: 900 - total flux cleaned = -0.00323039 Jy ! Component: 950 - total flux cleaned = -0.00320157 Jy ! Component: 1000 - total flux cleaned = -0.00314341 Jy ! Component: 1050 - total flux cleaned = -0.00317238 Jy ! Component: 1100 - total flux cleaned = -0.00297231 Jy ! Component: 1150 - total flux cleaned = -0.00297301 Jy ! Component: 1200 - total flux cleaned = -0.00294518 Jy ! Component: 1250 - total flux cleaned = -0.00294558 Jy ! Component: 1300 - total flux cleaned = -0.00302486 Jy ! Component: 1350 - total flux cleaned = -0.00297241 Jy ! Component: 1400 - total flux cleaned = -0.00302459 Jy ! Component: 1450 - total flux cleaned = -0.00302425 Jy ! Component: 1500 - total flux cleaned = -0.00304934 Jy ! Component: 1550 - total flux cleaned = -0.00302472 Jy ! Component: 1600 - total flux cleaned = -0.00300044 Jy ! Component: 1650 - total flux cleaned = -0.00295276 Jy ! Component: 1700 - total flux cleaned = -0.0029056 Jy ! Component: 1750 - total flux cleaned = -0.00285917 Jy ! Component: 1800 - total flux cleaned = -0.00279065 Jy ! Component: 1850 - total flux cleaned = -0.00274558 Jy ! Component: 1900 - total flux cleaned = -0.00281235 Jy ! Component: 1950 - total flux cleaned = -0.00270242 Jy ! Component: 2000 - total flux cleaned = -0.00270257 Jy ! Total flux subtracted in 2048 components = -0.00265964 Jy ! Clean residual min=-0.001398 max=0.001692 Jy/beam ! Clean residual mean=-0.000025 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.820378 Jy keep ! Adding 162 model components to the UV plane model. ! The established model now contains 380 components and 0.820378 Jy ![Exited script file: muppet] wmap "J0750+8241_S_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.163 x 10.43 at 9.984 degrees (North through East) ! Clean map min=-0.002916 max=0.60173 Jy/beam ! Writing clean map to FITS file: J0750+8241_S_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.601732 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000437592 device "J0750+8241_S_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0750+8241_S_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.218167 0.218167 0.436333 0.872666 1.74533 3.49066 6.98133 13.9627 27.9253 55.8506 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.601 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.163 x 10.43 at 9.984 degrees (North through East) ! Clean map min=-0.002916 max=0.60173 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0750+8241_S_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0750+8241_S_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0750+8241_S_2006_02_14_yyk_uvs.log closed on Wed Jul 5 11:42:15 2006