The following information is also available:
Time column is TIME ORDERED-> Fetching fa950804_0022.0336.Z
ATTITUDE_V0.9j
reading attitude file:./merged.tmp
open asc output file:out.tmp
AVERAGE ASPECT AND OFFSET FOR THIS ATTITUDE FILE:
Attitude file start and stop ascatime : 81649411.163000 81660977.626700
Data file start and stop ascatime : 81649411.163000 81660977.626700
Aspecting run start and stop ascatime : 81649411.163096 81660977.626611
Time interval averaged over (seconds) : 11566.463515
Total pointing and manuver time (sec) : 7730.488770 3835.986816
Mean boresight Euler angles : 350.904766 31.459028 53.484288
RA DEC SUN ANGLE
Mean solar position (deg) : 132.74 17.66
Mean aberration (arcsec) : 27.74 -8.78
Mean sat X-axis (deg) : 48.629943 -18.092159 90.07
Mean sat Y-axis (deg) : 129.947942 24.799153 7.60
Mean sat Z-axis (deg) : 350.904766 58.540971 97.60
RA DEC ROLL OFFSET
(deg) (deg) (deg) (arcmin)
Average 350.988281 58.821892 323.414886 0.113108
Minimum 350.976562 58.819992 323.404938 0.019155
Maximum 350.992828 58.823555 323.425964 0.405701
Sigma (RMS) 0.001341 0.000132 0.003316 0.061485
Number of ASPECT records processed = 11223
Aspecting to RA/DEC : 350.98828125 58.82189178
closing output file...
closing attitude file...
-> Standard Output From STOOL checkatt:
Opening file: ./out.tmp
***************** Observation Info ******************
RA (J2000 deg): 350.988 DEC: 58.822
START TIME: SC 81649411.1631 = UT 04/08/95 00:23:31
****** Definition of Attitude SENSOR Bit Flags ******
Sensors used in the attitude determination and attitude control mode
1: USED, 0: NOT USED
B0:STT-A, B1:STT-B, B2:NSAS, B3:GAS, B4:SSAS-SA, B5:SSAS-SB,
B6:IRU-X, B7:IRU-Y, B8:IRU-Z, B9:IRU-S1, B10:IRU-S2,
B11: Attitude control mode 1: coarse, 0: fine
B12: Sun presence 1: day, 0: night
B13: STT-A earth occultation 1: earth occultation, 0: no occultation
B14: STT-B earth occultation 1: earth occultation, 0: no occultation
B16,17,18: STT-A track stars no.1,2,3, 1: USED, 0: NOT USED
B19,20,21: STT-B track stars no.1,2,3, 1: USED, 0: NOT USED
B22,23: always 0
******** Attitude File Reconstruction Summary *******
S S N G S S I I I I I A S S S S S
T T S A S S R R R R R C U T T T T
T T A S A A U U U U U M N T T T T
- - S . A A - - - - - . . - - - -
A B . . - - X Y Z S S . . A B A B
. . . . S S . . . 1 2 . . O O S S
offset_time separation sensor . . . . A B . . . . . . . C C T T
(sec) (arcmin) . . . . . . . . . . . . . C C R R
BIT: 0 1 2 3 4 5 6 7 8 9 A B C D E
16.000090 0.340 E02283 1 1 0 0 0 0 0 1 0 1 0 0 0 1 0 0 4
47.999996 0.300 FC28C3 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 4 7
2181.993408 0.085 2003 1 1 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0
5807.981934 0.048 FC28C3 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 4 7
8043.974609 0.047 2403 1 1 0 0 0 0 0 0 0 0 1 0 0 1 0 0 0
11521.963867 0.145 2803 1 1 0 0 0 0 0 0 0 0 0 1 0 1 0 0 0
11566.463867 0.104 3803 1 1 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0
Attitude Records: 11223
Attitude Steps: 7
Maneuver ACM time: 3836.00 sec
Pointed ACM time: 7730.49 sec
-> Calculating aspect point99 100 count=22 sum1=7719.67 sum2=692.179 sum3=1176.89 100 99 count=53 sum1=18597.9 sum2=1667.27 sum3=2834.78 100 100 count=7277 sum1=2.55351e+06 sum2=228935 sum3=389233 101 99 count=3183 sum1=1.11694e+06 sum2=100131 sum3=170235 101 100 count=687 sum1=241073 sum2=21612.4 sum3=36742.8 0 out of 11222 points outside bin structure-> Euler angles: 350.903, 31.4594, 53.4862
frf_directory,s,h,"./",,,"frf directory" frf_file,s,h,"ft950804_0022.0336",,,"frf telemetry file"-> Standard Output From FTOOL frfread:
Frfread version 3.00 patch 32 ASCA format Telemetry file: ft950804_0022.0336 Initial mode = 2 (Bright) Initial value for dummy = 0 Initial datamode = 0 (Observation) Initial sis = 0 Initial bit_rate = 1 Reading all superframes reading PH mode reading PCAL mode reading MPCmode No mode = 0 Faint = 174464 Bright = 5184 Fast = 0 Frame = 0 Dark frame = 0 Histogram = 0 Integration = 0 PH = 179648 MPC = 0 PCAL = 0 Memory Check = 0 Number of superframes = 2830 no. of SIS events found = 582892-> Removing the following files with NEVENTS=0
ft950804_0022_0336G200170L.fits ft950804_0022_0336G200670L.fits ft950804_0022_0336G200770H.fits ft950804_0022_0336G200870H.fits ft950804_0022_0336G300170L.fits ft950804_0022_0336G300770L.fits ft950804_0022_0336G300870H.fits ft950804_0022_0336S000202M.fits ft950804_0022_0336S100102L.fits ft950804_0022_0336S100202M.fits-> Checking for empty GTI extensions
ft950804_0022_0336S000102L.fits[3] ft950804_0022_0336S000302M.fits[3] ft950804_0022_0336S000402H.fits[3] ft950804_0022_0336S000502H.fits[3] ft950804_0022_0336S000601H.fits[3] ft950804_0022_0336S000701L.fits[3] ft950804_0022_0336S000801H.fits[3] ft950804_0022_0336S000901M.fits[3] ft950804_0022_0336S001001H.fits[3]-> Merging GTIs from the following files:
ft950804_0022_0336S100302M.fits[3] ft950804_0022_0336S100402H.fits[3] ft950804_0022_0336S100502H.fits[3] ft950804_0022_0336S100601H.fits[3] ft950804_0022_0336S100701L.fits[3] ft950804_0022_0336S100801H.fits[3] ft950804_0022_0336S100901M.fits[3] ft950804_0022_0336S101001H.fits[3]-> Merging GTIs from the following files:
ft950804_0022_0336G200270M.fits[3] ft950804_0022_0336G200370M.fits[3] ft950804_0022_0336G200470H.fits[3] ft950804_0022_0336G200570L.fits[3] ft950804_0022_0336G200970H.fits[3] ft950804_0022_0336G201070H.fits[3] ft950804_0022_0336G201170H.fits[3] ft950804_0022_0336G201270M.fits[3] ft950804_0022_0336G201370H.fits[3]-> Merging GTIs from the following files:
ft950804_0022_0336G300270M.fits[3] ft950804_0022_0336G300370M.fits[3] ft950804_0022_0336G300470M.fits[3] ft950804_0022_0336G300570H.fits[3] ft950804_0022_0336G300670L.fits[3] ft950804_0022_0336G300970H.fits[3] ft950804_0022_0336G301070H.fits[3] ft950804_0022_0336G301170H.fits[3] ft950804_0022_0336G301270H.fits[3] ft950804_0022_0336G301370M.fits[3] ft950804_0022_0336G301470H.fits[3]
GISSORTCODE:LO:Start program GISSORTCODE:LO:End program-> Standard Error Output From STOOL gissortsplit:
GISSORTSPLIT:LO:Start program GISSORTSPLIT:LO:g200170h.prelist merge count = 1 photon cnt = 9 GISSORTSPLIT:LO:g200270h.prelist merge count = 1 photon cnt = 43 GISSORTSPLIT:LO:g200370h.prelist merge count = 3 photon cnt = 254812 GISSORTSPLIT:LO:g200170l.prelist merge count = 1 photon cnt = 3310 GISSORTSPLIT:LO:g200170m.prelist merge count = 1 photon cnt = 11 GISSORTSPLIT:LO:g200270m.prelist merge count = 2 photon cnt = 4172 GISSORTSPLIT:LO:Total filenames split = 9 GISSORTSPLIT:LO:Total split file cnt = 6 GISSORTSPLIT:LO:End program-> Creating ad12002280g200170h.unf
---- cmerge: version 1.5 ---- A total of 3 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft950804_0022_0336G200470H.fits 2 -- ft950804_0022_0336G201170H.fits 3 -- ft950804_0022_0336G201370H.fits Merging binary extension #: 2 1 -- ft950804_0022_0336G200470H.fits 2 -- ft950804_0022_0336G201170H.fits 3 -- ft950804_0022_0336G201370H.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad12002280g200270m.unf
---- cmerge: version 1.5 ---- A total of 2 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft950804_0022_0336G200370M.fits 2 -- ft950804_0022_0336G201270M.fits Merging binary extension #: 2 1 -- ft950804_0022_0336G200370M.fits 2 -- ft950804_0022_0336G201270M.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Checking ft950804_0022_0336G200570L.fits
---- cmerge: version 1.5 ---- A total of 1 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft950804_0022_0336G200570L.fits Merging binary extension #: 2 1 -- ft950804_0022_0336G200570L.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Ignoring the following files containing 000000043 events
ft950804_0022_0336G201070H.fits-> Ignoring the following files containing 000000011 events
ft950804_0022_0336G200270M.fits-> Ignoring the following files containing 000000009 events
ft950804_0022_0336G200970H.fits-> Collecting GIS3 event files by mode
GISSORTCODE:LO:Start program GISSORTCODE:LO:End program-> Standard Error Output From STOOL gissortsplit:
GISSORTSPLIT:LO:Start program GISSORTSPLIT:LO:g300170h.prelist merge count = 1 photon cnt = 9 GISSORTSPLIT:LO:g300270h.prelist merge count = 1 photon cnt = 46 GISSORTSPLIT:LO:g300370h.prelist merge count = 1 photon cnt = 83 GISSORTSPLIT:LO:g300470h.prelist merge count = 3 photon cnt = 229264 GISSORTSPLIT:LO:g300170l.prelist merge count = 1 photon cnt = 3189 GISSORTSPLIT:LO:g300170m.prelist merge count = 1 photon cnt = 2 GISSORTSPLIT:LO:g300270m.prelist merge count = 1 photon cnt = 253 GISSORTSPLIT:LO:g300370m.prelist merge count = 2 photon cnt = 3781 GISSORTSPLIT:LO:Total filenames split = 11 GISSORTSPLIT:LO:Total split file cnt = 8 GISSORTSPLIT:LO:End program-> Creating ad12002280g300170h.unf
---- cmerge: version 1.5 ---- A total of 3 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft950804_0022_0336G300570H.fits 2 -- ft950804_0022_0336G301270H.fits 3 -- ft950804_0022_0336G301470H.fits Merging binary extension #: 2 1 -- ft950804_0022_0336G300570H.fits 2 -- ft950804_0022_0336G301270H.fits 3 -- ft950804_0022_0336G301470H.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad12002280g300270m.unf
---- cmerge: version 1.5 ---- A total of 2 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft950804_0022_0336G300470M.fits 2 -- ft950804_0022_0336G301370M.fits Merging binary extension #: 2 1 -- ft950804_0022_0336G300470M.fits 2 -- ft950804_0022_0336G301370M.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Checking ft950804_0022_0336G300670L.fits
---- cmerge: version 1.5 ---- A total of 1 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft950804_0022_0336G300670L.fits Merging binary extension #: 2 1 -- ft950804_0022_0336G300670L.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Ignoring the following files containing 000000253 events
ft950804_0022_0336G300370M.fits-> Ignoring the following files containing 000000083 events
ft950804_0022_0336G301170H.fits-> Ignoring the following files containing 000000046 events
ft950804_0022_0336G301070H.fits-> Ignoring the following files containing 000000009 events
ft950804_0022_0336G300970H.fits-> Ignoring the following files containing 000000002 events
ft950804_0022_0336G300270M.fits-> Collecting SIS0 event files by mode
SIS0SORTCODE:LO:Start program SIS0SORTCODE:LO:End program-> Standard Error Output From STOOL sis0sortsplit:
SIS0SORTSPLIT:LO:Start program SIS0SORTSPLIT:LO:s000101h.prelist merge count = 3 photon cnt = 297275 SIS0SORTSPLIT:LO:s000201l.prelist merge count = 1 photon cnt = 3762 SIS0SORTSPLIT:LO:s000301m.prelist merge count = 1 photon cnt = 10089 SIS0SORTSPLIT:LO:s000402h.prelist merge count = 1 photon cnt = 2035 SIS0SORTSPLIT:LO:s000502h.prelist merge count = 1 photon cnt = 113 SIS0SORTSPLIT:LO:s000602l.prelist merge count = 1 photon cnt = 1 SIS0SORTSPLIT:LO:s000702m.prelist merge count = 1 photon cnt = 15128 SIS0SORTSPLIT:LO:Total filenames split = 9 SIS0SORTSPLIT:LO:Total split file cnt = 7 SIS0SORTSPLIT:LO:End program-> Creating ad12002280s000101h.unf
---- cmerge: version 1.5 ---- A total of 3 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft950804_0022_0336S000601H.fits 2 -- ft950804_0022_0336S000801H.fits 3 -- ft950804_0022_0336S001001H.fits Merging binary extension #: 2 1 -- ft950804_0022_0336S000601H.fits 2 -- ft950804_0022_0336S000801H.fits 3 -- ft950804_0022_0336S001001H.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Checking ft950804_0022_0336S000302M.fits
---- cmerge: version 1.5 ---- A total of 1 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft950804_0022_0336S000302M.fits Merging binary extension #: 2 1 -- ft950804_0022_0336S000302M.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Checking ft950804_0022_0336S000901M.fits
---- cmerge: version 1.5 ---- A total of 1 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft950804_0022_0336S000901M.fits Merging binary extension #: 2 1 -- ft950804_0022_0336S000901M.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Checking ft950804_0022_0336S000701L.fits
---- cmerge: version 1.5 ---- A total of 1 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft950804_0022_0336S000701L.fits Merging binary extension #: 2 1 -- ft950804_0022_0336S000701L.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Checking ft950804_0022_0336S000502H.fits
---- cmerge: version 1.5 ---- A total of 1 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft950804_0022_0336S000502H.fits Merging binary extension #: 2 1 -- ft950804_0022_0336S000502H.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Ignoring the following files containing 000000113 events
ft950804_0022_0336S000402H.fits-> Ignoring the following files containing 000000001 events
ft950804_0022_0336S000102L.fits-> Collecting SIS1 event files by mode
SIS1SORTCODE:LO:Start program SIS1SORTCODE:LO:End program-> Standard Error Output From STOOL sis1sortsplit:
SIS1SORTSPLIT:LO:Start program SIS1SORTSPLIT:LO:s100101h.prelist merge count = 3 photon cnt = 224809 SIS1SORTSPLIT:LO:s100201l.prelist merge count = 1 photon cnt = 3761 SIS1SORTSPLIT:LO:s100301m.prelist merge count = 1 photon cnt = 7565 SIS1SORTSPLIT:LO:s100402h.prelist merge count = 1 photon cnt = 781 SIS1SORTSPLIT:LO:s100502h.prelist merge count = 1 photon cnt = 1080 SIS1SORTSPLIT:LO:s100602m.prelist merge count = 1 photon cnt = 16493 SIS1SORTSPLIT:LO:Total filenames split = 8 SIS1SORTSPLIT:LO:Total split file cnt = 6 SIS1SORTSPLIT:LO:End program-> Creating ad12002280s100101h.unf
---- cmerge: version 1.5 ---- A total of 3 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft950804_0022_0336S100601H.fits 2 -- ft950804_0022_0336S100801H.fits 3 -- ft950804_0022_0336S101001H.fits Merging binary extension #: 2 1 -- ft950804_0022_0336S100601H.fits 2 -- ft950804_0022_0336S100801H.fits 3 -- ft950804_0022_0336S101001H.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Checking ft950804_0022_0336S100302M.fits
---- cmerge: version 1.5 ---- A total of 1 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft950804_0022_0336S100302M.fits Merging binary extension #: 2 1 -- ft950804_0022_0336S100302M.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Checking ft950804_0022_0336S100901M.fits
---- cmerge: version 1.5 ---- A total of 1 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft950804_0022_0336S100901M.fits Merging binary extension #: 2 1 -- ft950804_0022_0336S100901M.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Checking ft950804_0022_0336S100701L.fits
---- cmerge: version 1.5 ---- A total of 1 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft950804_0022_0336S100701L.fits Merging binary extension #: 2 1 -- ft950804_0022_0336S100701L.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Checking ft950804_0022_0336S100502H.fits
---- cmerge: version 1.5 ---- A total of 1 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft950804_0022_0336S100502H.fits Merging binary extension #: 2 1 -- ft950804_0022_0336S100502H.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Ignoring the following files containing 000000781 events
ft950804_0022_0336S100402H.fits-> Tar-ing together the leftover raw files
a ft950804_0022_0336G200270M.fits 40K a ft950804_0022_0336G200970H.fits 40K a ft950804_0022_0336G201070H.fits 40K a ft950804_0022_0336G300270M.fits 40K a ft950804_0022_0336G300370M.fits 45K a ft950804_0022_0336G300970H.fits 40K a ft950804_0022_0336G301070H.fits 40K a ft950804_0022_0336G301170H.fits 40K a ft950804_0022_0336S000102L.fits 40K a ft950804_0022_0336S000402H.fits 43K a ft950804_0022_0336S100402H.fits 62K-> Checking OBJECT keywords in HK and event files
temp2gain v4.2 opening ft950804_0022.0336 'ft950804_0022.0336' is successfully opened Data Start Time is 81649395.16 (950804 002315) Time Margin 2.0 sec included 'ft950804_0022.0336' EOF detected, sf=2830 Data End Time is 81660979.13 (950804 033619) Gain History is written in ft950804_0022_0336.ghf-> Checking if column CAL_START in ft950804_0022_0336.ghf[1] is in order
Time column is TIME ORDERED-> Checking if column CAL_STOP in ft950804_0022_0336.ghf[1] is in order
Time column is TIME ORDERED
ASCALIN_V0.9t-> Checking if ad12002280g200270m.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002280g200370l.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002280g300170h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002280g300270m.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002280g300370l.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002280s000101h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002280s000102h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002280s000112h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002280s000202m.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002280s000301m.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002280s000401l.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002280s000502h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002280s100101h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002280s100102h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002280s100112h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002280s100202m.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002280s100301m.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002280s100401l.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002280s100402l.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002280s100412l.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002280s100502h.unf is covered by attitude file
ASCALIN_V0.9t
Date and time are: 95/ 8/ 4 0:22 mjd=49933.015278 Orbit file name is ./frf.orbit.204 Epoch of Orbital Elements: 1995/8/1 0:0:0 Rigidity Data File: ./rigidity.data.1.23 Attitude FRF: fa950804_0022.0336 S0-HK file: ft950804_0022_0336S0HK.fits S1-HK file: ft950804_0022_0336S1HK.fits G2-HK file: ft950804_0022_0336G2HK.fits G3-HK file: ft950804_0022_0336G3HK.fits output FITS File: ft950804_0022_0336.mkf Total 366 Data bins were processed.-> Checking if column TIME in ft950804_0022_0336.mkf is in order
Time column is TIME ORDERED-> Calculating dead time values for filter file
The sum of the selected column is 13054.608 The mean of the selected column is 99.653493 The standard deviation of the selected column is 37.378862 The minimum of selected column is 82.000267 The maximum of selected column is 392.93872 The number of points used in calculation is 131-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S0_PIXL2>0.0 && S0_PIXL2<211.7 ) ) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:46:11 0.51E+04 290010 0010
Processing file: /data/data17/seq_proc/12002280.003/ad12002280s000102h.unf
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/screen_work1001.xsl
Total Good Bad: Region Time Phase Cut
276151 232306 0 43845 0 0
Writing events file
232306 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
276151 232306 0 43845 0 0
in 4211.47 seconds
CLEANSIS_V1.6
allocating image arrays...
PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
* Anomalous pixels may consist of at least two populations.
1. Persistent HOT pixels are removed by comparing to the chip mean.
2. Flickering WARM pixels are removed by comparing to the cell mean.
3. In faint areas (zero bgd), flickering pixels are removed with a
cutoff threshold.
Hints:
Choose cell size and thresholds based on the expected background and the PSF.
Use the DIRTYSIS option to examine the anomalous pixel spectra.
Try a multiple pass clean:
Choose a PHA cut to optimize the S/N of the flickering pixels,
then a broad band clean.
Be suspicious of extended source cleans.
For very bright sources you may need to turn off the iteration option.
See the help page for further info (fhelp cleansis)
Poisson clean cell size : 5
Poisson probability threshold : 0.631E-05
Zero Bgd Cutoff threshold (>) : 3
Iterate : T
Dirtysis : F
Minimum PHA value (inclusive) : 0
Maximum PHA value (inclusive) : 4095
open output file: /data/data17/seq_proc/12002280.003/screen_in_event.xsl
reading data file: /data/data17/seq_proc/12002280.003/screen_out_event.xsl
copying primary header to output file...
making chip image...
Total counts in chip images : 232306
copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
Hot pixels & counts : 0 0
Flickering pixels iter, pixels & cnts : 1 4 43
cleaning chip # 3
Number of pixels rejected : 4
Number of (internal) image counts : 232306
Number of image cts rejected (N, %) : 43 0.0185101
By chip : 0 1 2 3
Pixels rejected : 0 0 4 0
Image counts : 0 0 232306 0
Image cts rejected: 0 0 43 0
Image cts rej (%) : 0.00 0.00 0.02 0.00
filtering data...
Total counts : 0 0 232306 0
Total cts rejected: 0 0 43 0
Total cts rej (%) : 0.00 0.00 0.02 0.00
Number of clean counts accepted : 232263
writing history cards...
copying extensions...
writing out hot pixs...
Number of rejected pixels : 4
updating NEVENTS keywords...
closing data file...
closing clean file...
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!screen:ASCA > read events ad12002280s000102h.unf
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad12002280s000102h.evt use_events=no
Wrote cleaned events file to ad12002280s000102h.evt
!screen:ASCA-SIS0-BRIGHT > exit save_session=no
-> Filtering ad12002280s000112h.unf into ad12002280s000112h.evtThe sum of the selected column is 13054.608 The mean of the selected column is 99.653493 The standard deviation of the selected column is 37.378862 The minimum of selected column is 82.000267 The maximum of selected column is 392.93872 The number of points used in calculation is 131-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S0_PIXL2>0.0 && S0_PIXL2<211.7 ) ) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C2 BRIGHT2 HIGH 04/08/95 00:46:11 0.51E+04 290437 0010
Processing file: /data/data17/seq_proc/12002280.003/ad12002280s000112h.unf
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/screen_work1001.xsl
Total Good Bad: Region Time Phase Cut
277120 233097 0 44023 0 0
Writing events file
233097 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
277120 233097 0 44023 0 0
in 4211.47 seconds
CLEANSIS_V1.6
allocating image arrays...
PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
* Anomalous pixels may consist of at least two populations.
1. Persistent HOT pixels are removed by comparing to the chip mean.
2. Flickering WARM pixels are removed by comparing to the cell mean.
3. In faint areas (zero bgd), flickering pixels are removed with a
cutoff threshold.
Hints:
Choose cell size and thresholds based on the expected background and the PSF.
Use the DIRTYSIS option to examine the anomalous pixel spectra.
Try a multiple pass clean:
Choose a PHA cut to optimize the S/N of the flickering pixels,
then a broad band clean.
Be suspicious of extended source cleans.
For very bright sources you may need to turn off the iteration option.
See the help page for further info (fhelp cleansis)
Poisson clean cell size : 5
Poisson probability threshold : 0.631E-05
Zero Bgd Cutoff threshold (>) : 3
Iterate : T
Dirtysis : F
Minimum PHA value (inclusive) : 0
Maximum PHA value (inclusive) : 4095
open output file: /data/data17/seq_proc/12002280.003/screen_in_event.xsl
reading data file: /data/data17/seq_proc/12002280.003/screen_out_event.xsl
copying primary header to output file...
making chip image...
Total counts in chip images : 233097
copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
Hot pixels & counts : 0 0
Flickering pixels iter, pixels & cnts : 1 3 38
cleaning chip # 3
Number of pixels rejected : 3
Number of (internal) image counts : 233097
Number of image cts rejected (N, %) : 38 0.0163022
By chip : 0 1 2 3
Pixels rejected : 0 0 3 0
Image counts : 0 0 233097 0
Image cts rejected: 0 0 38 0
Image cts rej (%) : 0.00 0.00 0.02 0.00
filtering data...
Total counts : 0 0 233097 0
Total cts rejected: 0 0 38 0
Total cts rej (%) : 0.00 0.00 0.02 0.00
Number of clean counts accepted : 233059
writing history cards...
copying extensions...
writing out hot pixs...
Number of rejected pixels : 3
updating NEVENTS keywords...
closing data file...
closing clean file...
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!screen:ASCA > read events ad12002280s000112h.unf
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 4095
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!screen:ASCA-SIS0-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4" save_file=no
!screen:ASCA-SIS0-BRIGHT2 > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS0-BRIGHT2 > extract events
!screen:ASCA-SIS0-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT2 > save clean outfile=ad12002280s000112h.evt use_events=no
Wrote cleaned events file to ad12002280s000112h.evt
!screen:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Filtering ad12002280s000202m.unf into ad12002280s000202m.evtThe sum of the selected column is 844.94022 The mean of the selected column is 105.61753 The standard deviation of the selected column is 22.798882 The minimum of selected column is 87.281593 The maximum of selected column is 150.81297 The number of points used in calculation is 8-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S0_PIXL2>37.2 && S0_PIXL2<174 ) ) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C2 BRIGHT MEDIUM 04/08/95 00:34:51 0.61E+03 15128 0010
Processing file: /data/data17/seq_proc/12002280.003/ad12002280s000202m.unf
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/screen_work1001.xsl
Total Good Bad: Region Time Phase Cut
14748 6375 0 8373 0 0
Writing events file
6375 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
14748 6375 0 8373 0 0
in 243.75 seconds
CLEANSIS_V1.6
allocating image arrays...
PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
* Anomalous pixels may consist of at least two populations.
1. Persistent HOT pixels are removed by comparing to the chip mean.
2. Flickering WARM pixels are removed by comparing to the cell mean.
3. In faint areas (zero bgd), flickering pixels are removed with a
cutoff threshold.
Hints:
Choose cell size and thresholds based on the expected background and the PSF.
Use the DIRTYSIS option to examine the anomalous pixel spectra.
Try a multiple pass clean:
Choose a PHA cut to optimize the S/N of the flickering pixels,
then a broad band clean.
Be suspicious of extended source cleans.
For very bright sources you may need to turn off the iteration option.
See the help page for further info (fhelp cleansis)
Poisson clean cell size : 5
Poisson probability threshold : 0.631E-05
Zero Bgd Cutoff threshold (>) : 3
Iterate : T
Dirtysis : F
Minimum PHA value (inclusive) : 0
Maximum PHA value (inclusive) : 4095
open output file: /data/data17/seq_proc/12002280.003/screen_in_event.xsl
reading data file: /data/data17/seq_proc/12002280.003/screen_out_event.xsl
copying primary header to output file...
making chip image...
Total counts in chip images : 6375
copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
Hot pixels & counts : 0 0
Flickering pixels iter, pixels & cnts : 1 4 12
cleaning chip # 3
Number of pixels rejected : 4
Number of (internal) image counts : 6375
Number of image cts rejected (N, %) : 12 0.1882353
By chip : 0 1 2 3
Pixels rejected : 0 0 4 0
Image counts : 0 0 6375 0
Image cts rejected: 0 0 12 0
Image cts rej (%) : 0.00 0.00 0.19 0.00
filtering data...
Total counts : 0 0 6375 0
Total cts rejected: 0 0 12 0
Total cts rej (%) : 0.00 0.00 0.19 0.00
Number of clean counts accepted : 6363
writing history cards...
copying extensions...
writing out hot pixs...
Number of rejected pixels : 4
updating NEVENTS keywords...
closing data file...
closing clean file...
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!screen:ASCA > read events ad12002280s000202m.unf
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad12002280s000202m.evt use_events=no
Wrote cleaned events file to ad12002280s000202m.evt
!screen:ASCA-SIS0-BRIGHT > exit save_session=no
-> Skipping ad12002280s000301m.unf because of mode(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S0_PIXL2>0) ) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:45:03 0.46E+02 2035 0010
Processing file: /data/data17/seq_proc/12002280.003/ad12002280s000502h.unf
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/screen_work1001.xsl
Total Good Bad: Region Time Phase Cut
1990 1990 0 0 0 0
Writing events file
1990 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1990 1990 0 0 0 0
in 45.91 seconds
CLEANSIS_V1.6
allocating image arrays...
PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
* Anomalous pixels may consist of at least two populations.
1. Persistent HOT pixels are removed by comparing to the chip mean.
2. Flickering WARM pixels are removed by comparing to the cell mean.
3. In faint areas (zero bgd), flickering pixels are removed with a
cutoff threshold.
Hints:
Choose cell size and thresholds based on the expected background and the PSF.
Use the DIRTYSIS option to examine the anomalous pixel spectra.
Try a multiple pass clean:
Choose a PHA cut to optimize the S/N of the flickering pixels,
then a broad band clean.
Be suspicious of extended source cleans.
For very bright sources you may need to turn off the iteration option.
See the help page for further info (fhelp cleansis)
Poisson clean cell size : 5
Poisson probability threshold : 0.631E-05
Zero Bgd Cutoff threshold (>) : 3
Iterate : T
Dirtysis : F
Minimum PHA value (inclusive) : 0
Maximum PHA value (inclusive) : 4095
open output file: /data/data17/seq_proc/12002280.003/screen_in_event.xsl
reading data file: /data/data17/seq_proc/12002280.003/screen_out_event.xsl
copying primary header to output file...
making chip image...
Total counts in chip images : 1990
copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
Hot pixels & counts : 0 0
Flickering pixels iter, pixels & cnts : 1 2 6
cleaning chip # 3
Number of pixels rejected : 2
Number of (internal) image counts : 1990
Number of image cts rejected (N, %) : 6 0.3015075
By chip : 0 1 2 3
Pixels rejected : 0 0 2 0
Image counts : 0 0 1990 0
Image cts rejected: 0 0 6 0
Image cts rej (%) : 0.00 0.00 0.30 0.00
filtering data...
Total counts : 0 0 1990 0
Total cts rejected: 0 0 6 0
Total cts rej (%) : 0.00 0.00 0.30 0.00
Number of clean counts accepted : 1984
writing history cards...
copying extensions...
writing out hot pixs...
Number of rejected pixels : 2
updating NEVENTS keywords...
closing data file...
closing clean file...
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!screen:ASCA > read events ad12002280s000502h.unf
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad12002280s000502h.evt use_events=no
Wrote cleaned events file to ad12002280s000502h.evt
!screen:ASCA-SIS0-BRIGHT > exit save_session=no
-> Skipping ad12002280s100101h.unf because of modeThe sum of the selected column is 9913.1248 The mean of the selected column is 76.254806 The standard deviation of the selected column is 49.520442 The minimum of selected column is 48.937656 The maximum of selected column is 459.50143 The number of points used in calculation is 130-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S1_PIXL0>0.0 && S1_PIXL0<224.8 ) ) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:46:11 0.51E+04 217775 1000
Processing file: /data/data17/seq_proc/12002280.003/ad12002280s100102h.unf
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/screen_work1001.xsl
Total Good Bad: Region Time Phase Cut
207878 173428 0 34450 0 0
Writing events file
173428 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
207878 173428 0 34450 0 0
in 4191.47 seconds
CLEANSIS_V1.6
allocating image arrays...
PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
* Anomalous pixels may consist of at least two populations.
1. Persistent HOT pixels are removed by comparing to the chip mean.
2. Flickering WARM pixels are removed by comparing to the cell mean.
3. In faint areas (zero bgd), flickering pixels are removed with a
cutoff threshold.
Hints:
Choose cell size and thresholds based on the expected background and the PSF.
Use the DIRTYSIS option to examine the anomalous pixel spectra.
Try a multiple pass clean:
Choose a PHA cut to optimize the S/N of the flickering pixels,
then a broad band clean.
Be suspicious of extended source cleans.
For very bright sources you may need to turn off the iteration option.
See the help page for further info (fhelp cleansis)
Poisson clean cell size : 5
Poisson probability threshold : 0.631E-05
Zero Bgd Cutoff threshold (>) : 3
Iterate : T
Dirtysis : F
Minimum PHA value (inclusive) : 0
Maximum PHA value (inclusive) : 4095
open output file: /data/data17/seq_proc/12002280.003/screen_in_event.xsl
reading data file: /data/data17/seq_proc/12002280.003/screen_out_event.xsl
copying primary header to output file...
making chip image...
Total counts in chip images : 173428
copy bad pix array...
cleaning chip # 0
Hot pixels & counts : 0 0
Flickering pixels iter, pixels & cnts : 1 9 463
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
Number of pixels rejected : 9
Number of (internal) image counts : 173428
Number of image cts rejected (N, %) : 463 0.2669696
By chip : 0 1 2 3
Pixels rejected : 9 0 0 0
Image counts : 173428 0 0 0
Image cts rejected: 463 0 0 0
Image cts rej (%) : 0.27 0.00 0.00 0.00
filtering data...
Total counts : 173428 0 0 0
Total cts rejected: 463 0 0 0
Total cts rej (%) : 0.27 0.00 0.00 0.00
Number of clean counts accepted : 172965
writing history cards...
copying extensions...
writing out hot pixs...
Number of rejected pixels : 9
updating NEVENTS keywords...
closing data file...
closing clean file...
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!screen:ASCA > read events ad12002280s100102h.unf
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad12002280s100102h.evt use_events=no
Wrote cleaned events file to ad12002280s100102h.evt
!screen:ASCA-SIS1-BRIGHT > exit save_session=no
-> Filtering ad12002280s100112h.unf into ad12002280s100112h.evtThe sum of the selected column is 9913.1248 The mean of the selected column is 76.254806 The standard deviation of the selected column is 49.520442 The minimum of selected column is 48.937656 The maximum of selected column is 459.50143 The number of points used in calculation is 130-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S1_PIXL0>0.0 && S1_PIXL0<224.8 ) ) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C2 BRIGHT2 HIGH 04/08/95 00:46:11 0.51E+04 217857 1000
Processing file: /data/data17/seq_proc/12002280.003/ad12002280s100112h.unf
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/screen_work1001.xsl
Total Good Bad: Region Time Phase Cut
208105 173605 0 34500 0 0
Writing events file
173605 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
208105 173605 0 34500 0 0
in 4191.47 seconds
CLEANSIS_V1.6
allocating image arrays...
PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
* Anomalous pixels may consist of at least two populations.
1. Persistent HOT pixels are removed by comparing to the chip mean.
2. Flickering WARM pixels are removed by comparing to the cell mean.
3. In faint areas (zero bgd), flickering pixels are removed with a
cutoff threshold.
Hints:
Choose cell size and thresholds based on the expected background and the PSF.
Use the DIRTYSIS option to examine the anomalous pixel spectra.
Try a multiple pass clean:
Choose a PHA cut to optimize the S/N of the flickering pixels,
then a broad band clean.
Be suspicious of extended source cleans.
For very bright sources you may need to turn off the iteration option.
See the help page for further info (fhelp cleansis)
Poisson clean cell size : 5
Poisson probability threshold : 0.631E-05
Zero Bgd Cutoff threshold (>) : 3
Iterate : T
Dirtysis : F
Minimum PHA value (inclusive) : 0
Maximum PHA value (inclusive) : 4095
open output file: /data/data17/seq_proc/12002280.003/screen_in_event.xsl
reading data file: /data/data17/seq_proc/12002280.003/screen_out_event.xsl
copying primary header to output file...
making chip image...
Total counts in chip images : 173605
copy bad pix array...
cleaning chip # 0
Hot pixels & counts : 0 0
Flickering pixels iter, pixels & cnts : 1 9 463
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
Number of pixels rejected : 9
Number of (internal) image counts : 173605
Number of image cts rejected (N, %) : 463 0.2666974
By chip : 0 1 2 3
Pixels rejected : 9 0 0 0
Image counts : 173605 0 0 0
Image cts rejected: 463 0 0 0
Image cts rej (%) : 0.27 0.00 0.00 0.00
filtering data...
Total counts : 173605 0 0 0
Total cts rejected: 463 0 0 0
Total cts rej (%) : 0.27 0.00 0.00 0.00
Number of clean counts accepted : 173142
writing history cards...
copying extensions...
writing out hot pixs...
Number of rejected pixels : 9
updating NEVENTS keywords...
closing data file...
closing clean file...
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!screen:ASCA > read events ad12002280s100112h.unf
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 4095
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4" save_file=no
!screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS1-BRIGHT2 > extract events
!screen:ASCA-SIS1-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT2 > save clean outfile=ad12002280s100112h.evt use_events=no
Wrote cleaned events file to ad12002280s100112h.evt
!screen:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Filtering ad12002280s100202m.unf into ad12002280s100202m.evtThe sum of the selected column is 768.35070 The mean of the selected column is 96.043838 The standard deviation of the selected column is 29.603305 The minimum of selected column is 64.285988 The maximum of selected column is 143.50044 The number of points used in calculation is 8-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S1_PIXL0>7.2 && S1_PIXL0<184.8 ) ) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C2 BRIGHT MEDIUM 04/08/95 00:34:51 0.61E+03 16493 1000
Processing file: /data/data17/seq_proc/12002280.003/ad12002280s100202m.unf
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/screen_work1001.xsl
Total Good Bad: Region Time Phase Cut
15561 6828 0 8733 0 0
Writing events file
6828 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
15561 6828 0 8733 0 0
in 243.75 seconds
CLEANSIS_V1.6
allocating image arrays...
PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
* Anomalous pixels may consist of at least two populations.
1. Persistent HOT pixels are removed by comparing to the chip mean.
2. Flickering WARM pixels are removed by comparing to the cell mean.
3. In faint areas (zero bgd), flickering pixels are removed with a
cutoff threshold.
Hints:
Choose cell size and thresholds based on the expected background and the PSF.
Use the DIRTYSIS option to examine the anomalous pixel spectra.
Try a multiple pass clean:
Choose a PHA cut to optimize the S/N of the flickering pixels,
then a broad band clean.
Be suspicious of extended source cleans.
For very bright sources you may need to turn off the iteration option.
See the help page for further info (fhelp cleansis)
Poisson clean cell size : 5
Poisson probability threshold : 0.631E-05
Zero Bgd Cutoff threshold (>) : 3
Iterate : T
Dirtysis : F
Minimum PHA value (inclusive) : 0
Maximum PHA value (inclusive) : 4095
open output file: /data/data17/seq_proc/12002280.003/screen_in_event.xsl
reading data file: /data/data17/seq_proc/12002280.003/screen_out_event.xsl
copying primary header to output file...
making chip image...
Total counts in chip images : 6828
copy bad pix array...
cleaning chip # 0
Hot pixels & counts : 0 0
Flickering pixels iter, pixels & cnts : 1 7 21
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
Number of pixels rejected : 7
Number of (internal) image counts : 6828
Number of image cts rejected (N, %) : 21 0.3075571
By chip : 0 1 2 3
Pixels rejected : 7 0 0 0
Image counts : 6828 0 0 0
Image cts rejected: 21 0 0 0
Image cts rej (%) : 0.31 0.00 0.00 0.00
filtering data...
Total counts : 6828 0 0 0
Total cts rejected: 21 0 0 0
Total cts rej (%) : 0.31 0.00 0.00 0.00
Number of clean counts accepted : 6807
writing history cards...
copying extensions...
writing out hot pixs...
Number of rejected pixels : 7
updating NEVENTS keywords...
closing data file...
closing clean file...
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!screen:ASCA > read events ad12002280s100202m.unf
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad12002280s100202m.evt use_events=no
Wrote cleaned events file to ad12002280s100202m.evt
!screen:ASCA-SIS1-BRIGHT > exit save_session=no
-> Skipping ad12002280s100301m.unf because of mode(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S1_PIXL0>0) ) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C2 BRIGHT LOW 04/08/95 01:22:55 0.26E+04 1099 1000
Processing file: /data/data17/seq_proc/12002280.003/ad12002280s100402l.unf
EXTRACTOR vers 2.0 11 Apr 1997.
Skipping file: /data/data17/seq_proc/12002280.003/screen_work1001.xsl
Writing events file
0 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
0 0 0 0 0 0
in 0.00 seconds
CLEANSIS_V1.6
allocating image arrays...
PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
* Anomalous pixels may consist of at least two populations.
1. Persistent HOT pixels are removed by comparing to the chip mean.
2. Flickering WARM pixels are removed by comparing to the cell mean.
3. In faint areas (zero bgd), flickering pixels are removed with a
cutoff threshold.
Hints:
Choose cell size and thresholds based on the expected background and the PSF.
Use the DIRTYSIS option to examine the anomalous pixel spectra.
Try a multiple pass clean:
Choose a PHA cut to optimize the S/N of the flickering pixels,
then a broad band clean.
Be suspicious of extended source cleans.
For very bright sources you may need to turn off the iteration option.
See the help page for further info (fhelp cleansis)
Poisson clean cell size : 5
Poisson probability threshold : 0.631E-05
Zero Bgd Cutoff threshold (>) : 3
Iterate : T
Dirtysis : F
Minimum PHA value (inclusive) : 0
Maximum PHA value (inclusive) : 4095
open output file: /data/data17/seq_proc/12002280.003/screen_in_event.xsl
reading data file: /data/data17/seq_proc/12002280.003/screen_out_event.xsl
copying primary header to output file...
making chip image...
Total counts in chip images : 0
copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
Number of pixels rejected : 0
Number of (internal) image counts : 0
Number of image cts rejected (N, %) : 0 0.0000000
By chip : 0 1 2 3
Pixels rejected : 0 0 0 0
Image counts : 0 0 0 0
Image cts rejected: 0 0 0 0
Image cts rej (%) : 0.00 0.00 0.00 0.00
filtering data...
Total counts : 0 0 0 0
Total cts rejected: 0 0 0 0
Total cts rej (%) : 0.00 0.00 0.00 0.00
Number of clean counts accepted : 0
writing history cards...
copying extensions...
writing out hot pixs...
Number of rejected pixels : 0
updating NEVENTS keywords...
closing data file...
closing clean file...
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!screen:ASCA > read events ad12002280s100402l.unf
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad12002280s100402l.evt use_events=no
Wrote cleaned events file to ad12002280s100402l.evt
!screen:ASCA-SIS1-BRIGHT > exit save_session=no
-> Deleting ad12002280s100402l.evt since it contains 0 events(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S1_PIXL0>0) ) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C2 BRIGHT2 LOW 04/08/95 01:22:55 0.26E+04 1103 1000
Processing file: /data/data17/seq_proc/12002280.003/ad12002280s100412l.unf
EXTRACTOR vers 2.0 11 Apr 1997.
Skipping file: /data/data17/seq_proc/12002280.003/screen_work1001.xsl
Writing events file
0 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
0 0 0 0 0 0
in 0.00 seconds
CLEANSIS_V1.6
allocating image arrays...
PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
* Anomalous pixels may consist of at least two populations.
1. Persistent HOT pixels are removed by comparing to the chip mean.
2. Flickering WARM pixels are removed by comparing to the cell mean.
3. In faint areas (zero bgd), flickering pixels are removed with a
cutoff threshold.
Hints:
Choose cell size and thresholds based on the expected background and the PSF.
Use the DIRTYSIS option to examine the anomalous pixel spectra.
Try a multiple pass clean:
Choose a PHA cut to optimize the S/N of the flickering pixels,
then a broad band clean.
Be suspicious of extended source cleans.
For very bright sources you may need to turn off the iteration option.
See the help page for further info (fhelp cleansis)
Poisson clean cell size : 5
Poisson probability threshold : 0.631E-05
Zero Bgd Cutoff threshold (>) : 3
Iterate : T
Dirtysis : F
Minimum PHA value (inclusive) : 0
Maximum PHA value (inclusive) : 4095
open output file: /data/data17/seq_proc/12002280.003/screen_in_event.xsl
reading data file: /data/data17/seq_proc/12002280.003/screen_out_event.xsl
copying primary header to output file...
making chip image...
Total counts in chip images : 0
copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
Number of pixels rejected : 0
Number of (internal) image counts : 0
Number of image cts rejected (N, %) : 0 0.0000000
By chip : 0 1 2 3
Pixels rejected : 0 0 0 0
Image counts : 0 0 0 0
Image cts rejected: 0 0 0 0
Image cts rej (%) : 0.00 0.00 0.00 0.00
filtering data...
Total counts : 0 0 0 0
Total cts rejected: 0 0 0 0
Total cts rej (%) : 0.00 0.00 0.00 0.00
Number of clean counts accepted : 0
writing history cards...
copying extensions...
writing out hot pixs...
Number of rejected pixels : 0
updating NEVENTS keywords...
closing data file...
closing clean file...
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!screen:ASCA > read events ad12002280s100412l.unf
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 4095
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4" save_file=no
!screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS1-BRIGHT2 > extract events
!screen:ASCA-SIS1-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT2 > save clean outfile=ad12002280s100412l.evt use_events=no
Wrote cleaned events file to ad12002280s100412l.evt
!screen:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Deleting ad12002280s100412l.evt since it contains 0 events(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S1_PIXL0>0) ) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:45:31 0.24E+02 1080 1000
Processing file: /data/data17/seq_proc/12002280.003/ad12002280s100502h.unf
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/screen_work1001.xsl
Total Good Bad: Region Time Phase Cut
1041 1041 0 0 0 0
Writing events file
1041 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1041 1041 0 0 0 0
in 23.94 seconds
CLEANSIS_V1.6
allocating image arrays...
PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
* Anomalous pixels may consist of at least two populations.
1. Persistent HOT pixels are removed by comparing to the chip mean.
2. Flickering WARM pixels are removed by comparing to the cell mean.
3. In faint areas (zero bgd), flickering pixels are removed with a
cutoff threshold.
Hints:
Choose cell size and thresholds based on the expected background and the PSF.
Use the DIRTYSIS option to examine the anomalous pixel spectra.
Try a multiple pass clean:
Choose a PHA cut to optimize the S/N of the flickering pixels,
then a broad band clean.
Be suspicious of extended source cleans.
For very bright sources you may need to turn off the iteration option.
See the help page for further info (fhelp cleansis)
Poisson clean cell size : 5
Poisson probability threshold : 0.631E-05
Zero Bgd Cutoff threshold (>) : 3
Iterate : T
Dirtysis : F
Minimum PHA value (inclusive) : 0
Maximum PHA value (inclusive) : 4095
open output file: /data/data17/seq_proc/12002280.003/screen_in_event.xsl
reading data file: /data/data17/seq_proc/12002280.003/screen_out_event.xsl
copying primary header to output file...
making chip image...
File NEVENTS keyword value : 1041
Total counts in chip images : 1040
copy bad pix array...
cleaning chip # 0
Hot pixels & counts : 0 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
Number of pixels rejected : 0
Number of (internal) image counts : 1040
Number of image cts rejected (N, %) : 0 0.0000000
By chip : 0 1 2 3
Pixels rejected : 0 0 0 0
Image counts : 1040 0 0 0
Image cts rejected: 0 0 0 0
Image cts rej (%) : 0.00 0.00 0.00 0.00
filtering data...
Total counts : 1041 0 0 0
Total cts rejected: 0 0 0 0
Total cts rej (%) : 0.00 0.00 0.00 0.00
Number of clean counts accepted : 1041
writing history cards...
copying extensions...
writing out hot pixs...
Number of rejected pixels : 0
updating NEVENTS keywords...
closing data file...
closing clean file...
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!screen:ASCA > read events ad12002280s100502h.unf
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad12002280s100502h.evt use_events=no
Wrote cleaned events file to ad12002280s100502h.evt
!screen:ASCA-SIS1-BRIGHT > exit save_session=no
-> Filtering ad12002280g200170h.unf into ad12002280g200170h.evt(SAA==0)&& (COR>4)&& (G2_H0+G2_H2+G3_H0+G3_H2<45)&& (G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&& (RBM_CONT<100)&& (ELV>5)&& (ACS==0)&& (ANG_DIST>0)&& (ANG_DIST<0.01)&& (G2_L1>0)-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.46E+04 254812 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200170h.unf
Total Good Bad: Region Time Phase Cut
254812 247573 3824 3415 0 0
Writing events file
247573 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
254812 247573 3824 3415 0 0
in 4499.96 seconds
Infile # of rows Outfile # of rows # filtered
---------------- ----------------- ----------
247573 246034 1539
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!screen:ASCA > read events ad12002280g200170h.unf
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad12002280g200170h.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no
-> Setting NEVENTS to 246034 in ad12002280g200170h.unf(SAA==0)&& (COR>4)&& (G2_H0+G2_H2+G3_H0+G3_H2<45)&& (G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&& (RBM_CONT<100)&& (ELV>5)&& (ACS==0)&& (ANG_DIST>0)&& (ANG_DIST<0.01)&& (G2_L1>0)-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH MEDIUM 04/08/95 00:43:01 0.20E+04 4172 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200270m.unf
Total Good Bad: Region Time Phase Cut
4172 2001 1051 1120 0 0
Writing events file
2001 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
4172 2001 1051 1120 0 0
in 128.03 seconds
Infile # of rows Outfile # of rows # filtered
---------------- ----------------- ----------
2001 1964 37
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!screen:ASCA > read events ad12002280g200270m.unf
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.50000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad12002280g200270m.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no
-> Setting NEVENTS to 1964 in ad12002280g200270m.unf(SAA==0)&& (COR>4)&& (G2_H0+G2_H2+G3_H0+G3_H2<45)&& (G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&& (RBM_CONT<100)&& (ELV>5)&& (ACS==0)&& (ANG_DIST>0)&& (ANG_DIST<0.01)&& (G2_L1>0)-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH LOW 04/08/95 01:23:01 0.25E+04 3310 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200370l.unf
Total Good Bad: Region Time Phase Cut
3310 1264 1094 952 0 0
Writing events file
1264 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
3310 1264 1094 952 0 0
in 320.01 seconds
Infile # of rows Outfile # of rows # filtered
---------------- ----------------- ----------
1264 1258 6
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!screen:ASCA > read events ad12002280g200370l.unf
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 2.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad12002280g200370l.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no
-> Setting NEVENTS to 1258 in ad12002280g200370l.unf(SAA==0)&& (COR>4)&& (G2_H0+G2_H2+G3_H0+G3_H2<45)&& (G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&& (RBM_CONT<100)&& (ELV>5)&& (ACS==0)&& (ANG_DIST>0)&& (ANG_DIST<0.01)&& (G3_L1>0)-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.46E+04 229264 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300170h.unf
Total Good Bad: Region Time Phase Cut
229264 222760 3641 2863 0 0
Writing events file
222760 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
229264 222760 3641 2863 0 0
in 4499.96 seconds
Infile # of rows Outfile # of rows # filtered
---------------- ----------------- ----------
222760 221737 1023
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!screen:ASCA > read events ad12002280g300170h.unf
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad12002280g300170h.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no
-> Setting NEVENTS to 221737 in ad12002280g300170h.unf(SAA==0)&& (COR>4)&& (G2_H0+G2_H2+G3_H0+G3_H2<45)&& (G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&& (RBM_CONT<100)&& (ELV>5)&& (ACS==0)&& (ANG_DIST>0)&& (ANG_DIST<0.01)&& (G3_L1>0)-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH MEDIUM 04/08/95 00:43:17 0.20E+04 3781 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300270m.unf
Total Good Bad: Region Time Phase Cut
3781 1753 866 1162 0 0
Writing events file
1753 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
3781 1753 866 1162 0 0
in 112.03 seconds
Infile # of rows Outfile # of rows # filtered
---------------- ----------------- ----------
1753 1748 5
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!screen:ASCA > read events ad12002280g300270m.unf
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.50000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad12002280g300270m.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no
-> Setting NEVENTS to 1748 in ad12002280g300270m.unf(SAA==0)&& (COR>4)&& (G2_H0+G2_H2+G3_H0+G3_H2<45)&& (G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&& (RBM_CONT<100)&& (ELV>5)&& (ACS==0)&& (ANG_DIST>0)&& (ANG_DIST<0.01)&& (G3_L1>0)-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH LOW 04/08/95 01:23:01 0.25E+04 3189 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300370l.unf
Total Good Bad: Region Time Phase Cut
3189 1268 925 996 0 0
Writing events file
1268 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
3189 1268 925 996 0 0
in 320.01 seconds
Infile # of rows Outfile # of rows # filtered
---------------- ----------------- ----------
1268 1265 3
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!screen:ASCA > read events ad12002280g300370l.unf
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 2.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad12002280g300370l.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no
-> Setting NEVENTS to 1265 in ad12002280g300370l.unf-ANNULUS(128.5,128.5,192,88) -ELLIPSE(167.5,220,24.66,28.95,245.298)-> gis2_ano_on_flf_180295.fits already present in current directory
ASCAEXPO_V0.9b
reading data file: ad12002280g200170h.evt
reading gti ext: STDGTI
reading cal file: gis2_ano_on_flf_180295.fits
reading inst file: GIS2_REGION256.4_regionmap.tmp
making an inst map...
multiply inst map...
reading att file: ./fa950804_0022.0336
making an exposure map...
Aspect RA/DEC/ROLL : 350.9870 58.8215 323.4366
Mean RA/DEC/ROLL : 351.0207 58.8000 323.4366
Pnt RA/DEC/ROLL : 350.9546 58.8391 323.4366
Image rebin factor : 1
Attitude Records : 11224
GTI intervals : 22
Total GTI (secs) : 4499.965
Max attitude excursion (arcsecs) : 5.000
0 Percent Complete: Total/live time: 0.0000000 0.0000000
10 Percent Complete: Total/live time: 1890.9940186 1890.9940186
20 Percent Complete: Total/live time: 1890.9940186 1890.9940186
30 Percent Complete: Total/live time: 2231.9931641 2231.9931641
40 Percent Complete: Total/live time: 2231.9931641 2231.9931641
50 Percent Complete: Total/live time: 2541.4711914 2541.4711914
60 Percent Complete: Total/live time: 2897.9702148 2897.9702148
70 Percent Complete: Total/live time: 4499.9648438 4499.9648438
100 Percent Complete: Total/live time: 4499.9648438 4499.9648438
Number of attitude steps used: 10
Number of attitude steps avail: 9062
Mean RA/DEC pixel offset: -11.8360 -2.7928
writing expo file: ad12002280g200170h.expo
closing attitude file...
closing data file...
-> Generating low and high energy images for ad12002280g200170h.evt
** XSELECT V1.3 **
!> Enter session name >[xsel] ad12002280g200170h
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.45E+04 246034 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200170h.evt
Total Good Bad: Region Time Phase Cut
246034 245922 112 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
246034 245922 112 0 0 0
in 4499.96 seconds
Image has 245922 counts for 54.65 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200170h.evt
Total Good Bad: Region Time Phase Cut
246034 152259 112 0 0 93663
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
246034 152259 112 0 0 93663
in 4499.96 seconds
Image has 152259 counts for 33.84 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200170h.evt
Total Good Bad: Region Time Phase Cut
246034 95142 112 0 0 150780
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
246034 95142 112 0 0 150780
in 4499.96 seconds
Image has 95142 counts for 21.14 counts/sec
Command not found; type ? for a command listing
!ad12002280g200170h:ASCA >
!ad12002280g200170h:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!ad12002280g200170h:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!ad12002280g200170h:ASCA > read events ad12002280g200170h.evt
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!ad12002280g200170h:ASCA-GIS2-PH > set image sky
!ad12002280g200170h:ASCA-GIS2-PH > filter region corner_point.reg
!ad12002280g200170h:ASCA-GIS2-PH > extract image
!ad12002280g200170h:ASCA-GIS2-PH > save image outfile=ad12002280g200170h.img
Wrote image to file ad12002280g200170h.img
!ad12002280g200170h:ASCA-GIS2-PH > filter pha_cut 0 170
!ad12002280g200170h:ASCA-GIS2-PH > extract image
!ad12002280g200170h:ASCA-GIS2-PH > save image outfile=ad12002280g200170h_lo.img
Wrote image to file ad12002280g200170h_lo.img
!ad12002280g200170h:ASCA-GIS2-PH > clear pha_cut
!ad12002280g200170h:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound: 1024 is above the maximum value.
!ad12002280g200170h:ASCA-GIS2-PH > extract image
!ad12002280g200170h:ASCA-GIS2-PH > save image outfile=ad12002280g200170h_hi.img
Wrote image to file ad12002280g200170h_hi.img
!ad12002280g200170h:ASCA-GIS2-PH > exit save_session=no
-> Generating exposure map ad12002280g200270m.expo
ASCAEXPO_V0.9b
reading data file: ad12002280g200270m.evt
reading gti ext: STDGTI
reading cal file: gis2_ano_on_flf_180295.fits
reading inst file: GIS2_REGION256.4_regionmap.tmp
making an inst map...
multiply inst map...
reading att file: ./fa950804_0022.0336
making an exposure map...
Aspect RA/DEC/ROLL : 350.9870 58.8215 323.4366
Mean RA/DEC/ROLL : 351.0234 58.8007 323.4366
Pnt RA/DEC/ROLL : 350.9540 58.8384 323.4366
Image rebin factor : 1
Attitude Records : 11224
GTI intervals : 2
Total GTI (secs) : 128.030
Max attitude excursion (arcsecs) : 5.000
0 Percent Complete: Total/live time: 0.0000000 0.0000000
10 Percent Complete: Total/live time: 127.9996490 127.9996490
20 Percent Complete: Total/live time: 127.9996490 127.9996490
30 Percent Complete: Total/live time: 128.0298157 128.0298157
100 Percent Complete: Total/live time: 128.0298157 128.0298157
Number of attitude steps used: 3
Number of attitude steps avail: 282
Mean RA/DEC pixel offset: -9.1032 -1.7424
writing expo file: ad12002280g200270m.expo
closing attitude file...
closing data file...
-> Generating low and high energy images for ad12002280g200270m.evt
** XSELECT V1.3 **
!> Enter session name >[xsel] ad12002280g200270m
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH MEDIUM 04/08/95 00:43:01 0.13E+03 1964 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200270m.evt
Total Good Bad: Region Time Phase Cut
1964 1962 2 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1964 1962 2 0 0 0
in 128.03 seconds
Image has 1962 counts for 15.32 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200270m.evt
Total Good Bad: Region Time Phase Cut
1964 1212 2 0 0 750
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1964 1212 2 0 0 750
in 128.03 seconds
Image has 1212 counts for 9.467 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200270m.evt
Total Good Bad: Region Time Phase Cut
1964 753 2 0 0 1209
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1964 753 2 0 0 1209
in 128.03 seconds
Image has 753 counts for 5.881 counts/sec
Command not found; type ? for a command listing
!ad12002280g200270m:ASCA >
!ad12002280g200270m:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!ad12002280g200270m:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!ad12002280g200270m:ASCA > read events ad12002280g200270m.evt
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.50000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!ad12002280g200270m:ASCA-GIS2-PH > set image sky
!ad12002280g200270m:ASCA-GIS2-PH > filter region corner_point.reg
!ad12002280g200270m:ASCA-GIS2-PH > extract image
!ad12002280g200270m:ASCA-GIS2-PH > save image outfile=ad12002280g200270m.img
Wrote image to file ad12002280g200270m.img
!ad12002280g200270m:ASCA-GIS2-PH > filter pha_cut 0 170
!ad12002280g200270m:ASCA-GIS2-PH > extract image
!ad12002280g200270m:ASCA-GIS2-PH > save image outfile=ad12002280g200270m_lo.img
Wrote image to file ad12002280g200270m_lo.img
!ad12002280g200270m:ASCA-GIS2-PH > clear pha_cut
!ad12002280g200270m:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound: 1024 is above the maximum value.
!ad12002280g200270m:ASCA-GIS2-PH > extract image
!ad12002280g200270m:ASCA-GIS2-PH > save image outfile=ad12002280g200270m_hi.img
Wrote image to file ad12002280g200270m_hi.img
!ad12002280g200270m:ASCA-GIS2-PH > exit save_session=no
-> Generating exposure map ad12002280g200370l.expo
ASCAEXPO_V0.9b
reading data file: ad12002280g200370l.evt
reading gti ext: STDGTI
reading cal file: gis2_ano_on_flf_180295.fits
reading inst file: GIS2_REGION256.4_regionmap.tmp
making an inst map...
multiply inst map...
reading att file: ./fa950804_0022.0336
making an exposure map...
Aspect RA/DEC/ROLL : 350.9870 58.8215 323.4332
Mean RA/DEC/ROLL : 351.0198 58.8006 323.4332
Pnt RA/DEC/ROLL : 350.9609 58.8400 323.4332
Image rebin factor : 1
Attitude Records : 11224
GTI intervals : 1
Total GTI (secs) : 320.011
Max attitude excursion (arcsecs) : 5.000
0 Percent Complete: Total/live time: 0.0000000 0.0000000
10 Percent Complete: Total/live time: 61.9997559 61.9997559
20 Percent Complete: Total/live time: 320.0109558 320.0109558
100 Percent Complete: Total/live time: 320.0109558 320.0109558
Number of attitude steps used: 2
Number of attitude steps avail: 23
Mean RA/DEC pixel offset: -6.4372 -1.5909
writing expo file: ad12002280g200370l.expo
closing attitude file...
closing data file...
-> Generating low and high energy images for ad12002280g200370l.evt
** XSELECT V1.3 **
!> Enter session name >[xsel] ad12002280g200370l
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH LOW 04/08/95 01:23:01 0.32E+03 1258 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200370l.evt
Total Good Bad: Region Time Phase Cut
1258 1258 0 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1258 1258 0 0 0 0
in 320.01 seconds
Image has 1258 counts for 3.931 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200370l.evt
Total Good Bad: Region Time Phase Cut
1258 788 0 0 0 470
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1258 788 0 0 0 470
in 320.01 seconds
Image has 788 counts for 2.462 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200370l.evt
Total Good Bad: Region Time Phase Cut
1258 478 0 0 0 780
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1258 478 0 0 0 780
in 320.01 seconds
Image has 478 counts for 1.494 counts/sec
Command not found; type ? for a command listing
!ad12002280g200370l:ASCA >
!ad12002280g200370l:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!ad12002280g200370l:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!ad12002280g200370l:ASCA > read events ad12002280g200370l.evt
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 2.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!ad12002280g200370l:ASCA-GIS2-PH > set image sky
!ad12002280g200370l:ASCA-GIS2-PH > filter region corner_point.reg
!ad12002280g200370l:ASCA-GIS2-PH > extract image
!ad12002280g200370l:ASCA-GIS2-PH > save image outfile=ad12002280g200370l.img
Wrote image to file ad12002280g200370l.img
!ad12002280g200370l:ASCA-GIS2-PH > filter pha_cut 0 170
!ad12002280g200370l:ASCA-GIS2-PH > extract image
!ad12002280g200370l:ASCA-GIS2-PH > save image outfile=ad12002280g200370l_lo.img
Wrote image to file ad12002280g200370l_lo.img
!ad12002280g200370l:ASCA-GIS2-PH > clear pha_cut
!ad12002280g200370l:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound: 1024 is above the maximum value.
!ad12002280g200370l:ASCA-GIS2-PH > extract image
!ad12002280g200370l:ASCA-GIS2-PH > save image outfile=ad12002280g200370l_hi.img
Wrote image to file ad12002280g200370l_hi.img
!ad12002280g200370l:ASCA-GIS2-PH > exit save_session=no
-> Generating exposure map ad12002280g300170h.expo-ANNULUS(128.5,128.5,192,88) -ELLIPSE(217,95,21.56,25.92,169.216)-> gis3_ano_on_flf_180295.fits already present in current directory
ASCAEXPO_V0.9b
reading data file: ad12002280g300170h.evt
reading gti ext: STDGTI
reading cal file: gis3_ano_on_flf_180295.fits
reading inst file: GIS3_REGION256.4_regionmap.tmp
making an inst map...
multiply inst map...
reading att file: ./fa950804_0022.0336
making an exposure map...
Aspect RA/DEC/ROLL : 350.9870 58.8215 323.4062
Mean RA/DEC/ROLL : 350.9852 58.8167 323.4062
Pnt RA/DEC/ROLL : 350.9901 58.8224 323.4062
Image rebin factor : 1
Attitude Records : 11224
GTI intervals : 22
Total GTI (secs) : 4499.965
Max attitude excursion (arcsecs) : 5.000
0 Percent Complete: Total/live time: 0.0000000 0.0000000
10 Percent Complete: Total/live time: 1890.9940186 1890.9940186
20 Percent Complete: Total/live time: 1890.9940186 1890.9940186
30 Percent Complete: Total/live time: 2231.9931641 2231.9931641
40 Percent Complete: Total/live time: 2231.9931641 2231.9931641
50 Percent Complete: Total/live time: 2541.4711914 2541.4711914
60 Percent Complete: Total/live time: 2897.9702148 2897.9702148
70 Percent Complete: Total/live time: 4499.9648438 4499.9648438
100 Percent Complete: Total/live time: 4499.9648438 4499.9648438
Number of attitude steps used: 10
Number of attitude steps avail: 9062
Mean RA/DEC pixel offset: -0.9652 -1.7130
writing expo file: ad12002280g300170h.expo
closing attitude file...
closing data file...
-> Generating low and high energy images for ad12002280g300170h.evt
** XSELECT V1.3 **
!> Enter session name >[xsel] ad12002280g300170h
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.45E+04 221737 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300170h.evt
Total Good Bad: Region Time Phase Cut
221737 221644 93 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
221737 221644 93 0 0 0
in 4499.96 seconds
Image has 221644 counts for 49.25 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300170h.evt
Total Good Bad: Region Time Phase Cut
221737 137194 93 0 0 84450
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
221737 137194 93 0 0 84450
in 4499.96 seconds
Image has 137194 counts for 30.49 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300170h.evt
Total Good Bad: Region Time Phase Cut
221737 85943 93 0 0 135701
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
221737 85943 93 0 0 135701
in 4499.96 seconds
Image has 85943 counts for 19.10 counts/sec
Command not found; type ? for a command listing
!ad12002280g300170h:ASCA >
!ad12002280g300170h:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!ad12002280g300170h:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!ad12002280g300170h:ASCA > read events ad12002280g300170h.evt
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!ad12002280g300170h:ASCA-GIS3-PH > set image sky
!ad12002280g300170h:ASCA-GIS3-PH > filter region corner_point.reg
!ad12002280g300170h:ASCA-GIS3-PH > extract image
!ad12002280g300170h:ASCA-GIS3-PH > save image outfile=ad12002280g300170h.img
Wrote image to file ad12002280g300170h.img
!ad12002280g300170h:ASCA-GIS3-PH > filter pha_cut 0 170
!ad12002280g300170h:ASCA-GIS3-PH > extract image
!ad12002280g300170h:ASCA-GIS3-PH > save image outfile=ad12002280g300170h_lo.img
Wrote image to file ad12002280g300170h_lo.img
!ad12002280g300170h:ASCA-GIS3-PH > clear pha_cut
!ad12002280g300170h:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound: 1024 is above the maximum value.
!ad12002280g300170h:ASCA-GIS3-PH > extract image
!ad12002280g300170h:ASCA-GIS3-PH > save image outfile=ad12002280g300170h_hi.img
Wrote image to file ad12002280g300170h_hi.img
!ad12002280g300170h:ASCA-GIS3-PH > exit save_session=no
-> Generating exposure map ad12002280g300270m.expo
ASCAEXPO_V0.9b
reading data file: ad12002280g300270m.evt
reading gti ext: STDGTI
reading cal file: gis3_ano_on_flf_180295.fits
reading inst file: GIS3_REGION256.4_regionmap.tmp
making an inst map...
multiply inst map...
reading att file: ./fa950804_0022.0336
making an exposure map...
Aspect RA/DEC/ROLL : 350.9870 58.8215 323.4063
Mean RA/DEC/ROLL : 350.9874 58.8172 323.4063
Pnt RA/DEC/ROLL : 350.9897 58.8221 323.4063
Image rebin factor : 1
Attitude Records : 11224
GTI intervals : 2
Total GTI (secs) : 112.030
Max attitude excursion (arcsecs) : 5.000
0 Percent Complete: Total/live time: 0.0000000 0.0000000
10 Percent Complete: Total/live time: 111.9997025 111.9997025
20 Percent Complete: Total/live time: 111.9997025 111.9997025
30 Percent Complete: Total/live time: 112.0298767 112.0298767
100 Percent Complete: Total/live time: 112.0298767 112.0298767
Number of attitude steps used: 3
Number of attitude steps avail: 280
Mean RA/DEC pixel offset: -1.0689 -0.9757
writing expo file: ad12002280g300270m.expo
closing attitude file...
closing data file...
-> Generating low and high energy images for ad12002280g300270m.evt
** XSELECT V1.3 **
!> Enter session name >[xsel] ad12002280g300270m
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH MEDIUM 04/08/95 00:43:17 0.11E+03 1748 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300270m.evt
Total Good Bad: Region Time Phase Cut
1748 1746 2 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1748 1746 2 0 0 0
in 112.03 seconds
Image has 1746 counts for 15.59 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300270m.evt
Total Good Bad: Region Time Phase Cut
1748 1076 2 0 0 670
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1748 1076 2 0 0 670
in 112.03 seconds
Image has 1076 counts for 9.605 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300270m.evt
Total Good Bad: Region Time Phase Cut
1748 685 2 0 0 1061
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1748 685 2 0 0 1061
in 112.03 seconds
Image has 685 counts for 6.114 counts/sec
Command not found; type ? for a command listing
!ad12002280g300270m:ASCA >
!ad12002280g300270m:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!ad12002280g300270m:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!ad12002280g300270m:ASCA > read events ad12002280g300270m.evt
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.50000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!ad12002280g300270m:ASCA-GIS3-PH > set image sky
!ad12002280g300270m:ASCA-GIS3-PH > filter region corner_point.reg
!ad12002280g300270m:ASCA-GIS3-PH > extract image
!ad12002280g300270m:ASCA-GIS3-PH > save image outfile=ad12002280g300270m.img
Wrote image to file ad12002280g300270m.img
!ad12002280g300270m:ASCA-GIS3-PH > filter pha_cut 0 170
!ad12002280g300270m:ASCA-GIS3-PH > extract image
!ad12002280g300270m:ASCA-GIS3-PH > save image outfile=ad12002280g300270m_lo.img
Wrote image to file ad12002280g300270m_lo.img
!ad12002280g300270m:ASCA-GIS3-PH > clear pha_cut
!ad12002280g300270m:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound: 1024 is above the maximum value.
!ad12002280g300270m:ASCA-GIS3-PH > extract image
!ad12002280g300270m:ASCA-GIS3-PH > save image outfile=ad12002280g300270m_hi.img
Wrote image to file ad12002280g300270m_hi.img
!ad12002280g300270m:ASCA-GIS3-PH > exit save_session=no
-> Generating exposure map ad12002280g300370l.expo
ASCAEXPO_V0.9b
reading data file: ad12002280g300370l.evt
reading gti ext: STDGTI
reading cal file: gis3_ano_on_flf_180295.fits
reading inst file: GIS3_REGION256.4_regionmap.tmp
making an inst map...
multiply inst map...
reading att file: ./fa950804_0022.0336
making an exposure map...
Aspect RA/DEC/ROLL : 350.9870 58.8215 323.4028
Mean RA/DEC/ROLL : 350.9842 58.8173 323.4028
Pnt RA/DEC/ROLL : 350.9965 58.8233 323.4028
Image rebin factor : 1
Attitude Records : 11224
GTI intervals : 1
Total GTI (secs) : 320.011
Max attitude excursion (arcsecs) : 5.000
0 Percent Complete: Total/live time: 0.0000000 0.0000000
10 Percent Complete: Total/live time: 61.9997559 61.9997559
20 Percent Complete: Total/live time: 320.0109558 320.0109558
100 Percent Complete: Total/live time: 320.0109558 320.0109558
Number of attitude steps used: 2
Number of attitude steps avail: 23
Mean RA/DEC pixel offset: -0.3978 -0.9910
writing expo file: ad12002280g300370l.expo
closing attitude file...
closing data file...
-> Generating low and high energy images for ad12002280g300370l.evt
** XSELECT V1.3 **
!> Enter session name >[xsel] ad12002280g300370l
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH LOW 04/08/95 01:23:01 0.32E+03 1265 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300370l.evt
Total Good Bad: Region Time Phase Cut
1265 1265 0 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1265 1265 0 0 0 0
in 320.01 seconds
Image has 1265 counts for 3.953 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300370l.evt
Total Good Bad: Region Time Phase Cut
1265 778 0 0 0 487
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1265 778 0 0 0 487
in 320.01 seconds
Image has 778 counts for 2.431 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300370l.evt
Total Good Bad: Region Time Phase Cut
1265 497 0 0 0 768
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1265 497 0 0 0 768
in 320.01 seconds
Image has 497 counts for 1.553 counts/sec
Command not found; type ? for a command listing
!ad12002280g300370l:ASCA >
!ad12002280g300370l:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!ad12002280g300370l:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!ad12002280g300370l:ASCA > read events ad12002280g300370l.evt
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 2.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!ad12002280g300370l:ASCA-GIS3-PH > set image sky
!ad12002280g300370l:ASCA-GIS3-PH > filter region corner_point.reg
!ad12002280g300370l:ASCA-GIS3-PH > extract image
!ad12002280g300370l:ASCA-GIS3-PH > save image outfile=ad12002280g300370l.img
Wrote image to file ad12002280g300370l.img
!ad12002280g300370l:ASCA-GIS3-PH > filter pha_cut 0 170
!ad12002280g300370l:ASCA-GIS3-PH > extract image
!ad12002280g300370l:ASCA-GIS3-PH > save image outfile=ad12002280g300370l_lo.img
Wrote image to file ad12002280g300370l_lo.img
!ad12002280g300370l:ASCA-GIS3-PH > clear pha_cut
!ad12002280g300370l:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound: 1024 is above the maximum value.
!ad12002280g300370l:ASCA-GIS3-PH > extract image
!ad12002280g300370l:ASCA-GIS3-PH > save image outfile=ad12002280g300370l_hi.img
Wrote image to file ad12002280g300370l_hi.img
!ad12002280g300370l:ASCA-GIS3-PH > exit save_session=no
-> Generating exposure map ad12002280s000102h.expo
ASCAEXPO_V0.9b
reading data file: ad12002280s000102h.evt
reading gti ext: STDGTI
reading hp ext: HOT_PIXELS
reading cal file: s0_teldef_ascalin.fits
making an inst map...
SIS AREA DISC ENABL ON
CHIP: 0 1 2 3
CCD POWER ON/OFF: OFF OFF ON OFF
AREA DISC IN/OUT: OUT OUT OUT OUT
AREA DISC H START: 6 96 6 6
AREA DISC H STOP: 425 425 342 425
AREA DISC V START: 2 180 180 2
AREA DISC V STOP: 422 422 422 422
reading att file: ./fa950804_0022.0336
making an exposure map...
Aspect RA/DEC/ROLL : 350.9870 58.8215 323.4062
Mean RA/DEC/ROLL : 350.9855 58.7962 323.4062
Pnt RA/DEC/ROLL : 350.9909 58.8429 323.4062
Image rebin factor : 4
Attitude Records : 11224
Hot Pixels : 4
GTI intervals : 20
Total GTI (secs) : 4211.475
Max attitude excursion (arcsecs) : 5.000
0 Percent Complete: Total/live time: 0.0000000 0.0000000
10 Percent Complete: Total/live time: 1762.5253906 1762.5253906
20 Percent Complete: Total/live time: 1762.5253906 1762.5253906
30 Percent Complete: Total/live time: 2071.5354004 2071.5354004
40 Percent Complete: Total/live time: 2071.5354004 2071.5354004
50 Percent Complete: Total/live time: 2436.5136719 2436.5136719
60 Percent Complete: Total/live time: 2712.5129395 2712.5129395
70 Percent Complete: Total/live time: 4211.4750977 4211.4750977
100 Percent Complete: Total/live time: 4211.4750977 4211.4750977
Number of attitude steps used: 11
Number of attitude steps avail: 8846
Mean RA/DEC pixel offset: -59.9690 -84.2171
writing expo file: ad12002280s000102h.expo
closing attitude file...
closing data file...
-> Generating low and high energy images for ad12002280s000102h.evt
** XSELECT V1.3 **
!> Enter session name >[xsel] ad12002280s000102h
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:46:11 0.42E+04 232263 0010
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s000102h.evt
Total Good Bad: Region Time Phase Cut
232263 232263 0 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
232263 232263 0 0 0 0
in 4211.47 seconds
Image has 232263 counts for 55.15 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s000102h.evt
Total Good Bad: Region Time Phase Cut
232263 146565 0 0 0 85698
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
232263 146565 0 0 0 85698
in 4211.47 seconds
Image has 146565 counts for 34.80 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s000102h.evt
Total Good Bad: Region Time Phase Cut
232263 86072 0 0 0 146191
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
232263 86072 0 0 0 146191
in 4211.47 seconds
Image has 86072 counts for 20.44 counts/sec
Command not found; type ? for a command listing
!ad12002280s000102h:ASCA >
!ad12002280s000102h:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!ad12002280s000102h:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!ad12002280s000102h:ASCA > read events ad12002280s000102h.evt
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!ad12002280s000102h:ASCA-SIS0-BRIGHT > set image sky
!ad12002280s000102h:ASCA-SIS0-BRIGHT > filter region corner_point.reg
!ad12002280s000102h:ASCA-SIS0-BRIGHT > extract image
!ad12002280s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad12002280s000102h.img
Wrote image to file ad12002280s000102h.img
!ad12002280s000102h:ASCA-SIS0-BRIGHT > filter pha_cut 0 547
!ad12002280s000102h:ASCA-SIS0-BRIGHT > extract image
!ad12002280s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad12002280s000102h_lo.img
Wrote image to file ad12002280s000102h_lo.img
!ad12002280s000102h:ASCA-SIS0-BRIGHT > clear pha_cut
!ad12002280s000102h:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound: 2048 is above the maximum value.
!ad12002280s000102h:ASCA-SIS0-BRIGHT > extract image
!ad12002280s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad12002280s000102h_hi.img
Wrote image to file ad12002280s000102h_hi.img
!ad12002280s000102h:ASCA-SIS0-BRIGHT > exit save_session=no
-> Generating exposure map ad12002280s000202m.expo
ASCAEXPO_V0.9b
reading data file: ad12002280s000202m.evt
reading gti ext: STDGTI
reading hp ext: HOT_PIXELS
reading cal file: s0_teldef_ascalin.fits
making an inst map...
SIS AREA DISC ENABL ON
CHIP: 0 1 2 3
CCD POWER ON/OFF: OFF OFF ON OFF
AREA DISC IN/OUT: OUT OUT OUT OUT
AREA DISC H START: 6 96 6 6
AREA DISC H STOP: 425 425 342 425
AREA DISC V START: 2 180 180 2
AREA DISC V STOP: 422 422 422 422
reading att file: ./fa950804_0022.0336
making an exposure map...
Aspect RA/DEC/ROLL : 350.9870 58.8215 323.4142
Mean RA/DEC/ROLL : 350.9930 58.7985 323.4142
Pnt RA/DEC/ROLL : 350.9879 58.8412 323.4142
Image rebin factor : 4
Attitude Records : 11224
Hot Pixels : 4
GTI intervals : 1
Total GTI (secs) : 243.746
Max attitude excursion (arcsecs) : 5.000
0 Percent Complete: Total/live time: 0.0000000 0.0000000
10 Percent Complete: Total/live time: 243.7463684 243.7463684
100 Percent Complete: Total/live time: 243.7463684 243.7463684
Number of attitude steps used: 2
Number of attitude steps avail: 137
Mean RA/DEC pixel offset: -36.2796 -39.3984
writing expo file: ad12002280s000202m.expo
closing attitude file...
closing data file...
-> Generating low and high energy images for ad12002280s000202m.evt
** XSELECT V1.3 **
!> Enter session name >[xsel] ad12002280s000202m
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C2 BRIGHT MEDIUM 04/08/95 00:34:51 0.24E+03 6363 0010
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s000202m.evt
Total Good Bad: Region Time Phase Cut
6363 6363 0 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
6363 6363 0 0 0 0
in 243.75 seconds
Image has 6363 counts for 26.11 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s000202m.evt
Total Good Bad: Region Time Phase Cut
6363 3114 0 0 0 3249
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
6363 3114 0 0 0 3249
in 243.75 seconds
Image has 3114 counts for 12.78 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s000202m.evt
Total Good Bad: Region Time Phase Cut
6363 3266 0 0 0 3097
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
6363 3266 0 0 0 3097
in 243.75 seconds
Image has 3266 counts for 13.40 counts/sec
Command not found; type ? for a command listing
!ad12002280s000202m:ASCA >
!ad12002280s000202m:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!ad12002280s000202m:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!ad12002280s000202m:ASCA > read events ad12002280s000202m.evt
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!ad12002280s000202m:ASCA-SIS0-BRIGHT > set image sky
!ad12002280s000202m:ASCA-SIS0-BRIGHT > filter region corner_point.reg
!ad12002280s000202m:ASCA-SIS0-BRIGHT > extract image
!ad12002280s000202m:ASCA-SIS0-BRIGHT > save image outfile=ad12002280s000202m.img
Wrote image to file ad12002280s000202m.img
!ad12002280s000202m:ASCA-SIS0-BRIGHT > filter pha_cut 0 547
!ad12002280s000202m:ASCA-SIS0-BRIGHT > extract image
!ad12002280s000202m:ASCA-SIS0-BRIGHT > save image outfile=ad12002280s000202m_lo.img
Wrote image to file ad12002280s000202m_lo.img
!ad12002280s000202m:ASCA-SIS0-BRIGHT > clear pha_cut
!ad12002280s000202m:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound: 2048 is above the maximum value.
!ad12002280s000202m:ASCA-SIS0-BRIGHT > extract image
!ad12002280s000202m:ASCA-SIS0-BRIGHT > save image outfile=ad12002280s000202m_hi.img
Wrote image to file ad12002280s000202m_hi.img
!ad12002280s000202m:ASCA-SIS0-BRIGHT > exit save_session=no
-> Generating exposure map ad12002280s000502h.expo
ASCAEXPO_V0.9b
reading data file: ad12002280s000502h.evt
reading gti ext: STDGTI
reading hp ext: HOT_PIXELS
reading cal file: s0_teldef_ascalin.fits
making an inst map...
SIS AREA DISC ENABL ON
CHIP: 0 1 2 3
CCD POWER ON/OFF: OFF OFF ON OFF
AREA DISC IN/OUT: OUT OUT OUT OUT
AREA DISC H START: 6 96 6 6
AREA DISC H STOP: 425 425 342 425
AREA DISC V START: 2 180 180 2
AREA DISC V STOP: 422 422 422 422
reading att file: ./fa950804_0022.0336
making an exposure map...
Aspect RA/DEC/ROLL : 350.9870 58.8215 323.4124
Mean RA/DEC/ROLL : 350.9914 58.7977 323.4124
Pnt RA/DEC/ROLL : 350.9901 58.8427 323.4124
Image rebin factor : 4
Attitude Records : 11224
Hot Pixels : 2
GTI intervals : 3
Total GTI (secs) : 45.906
Max attitude excursion (arcsecs) : 5.000
0 Percent Complete: Total/live time: 0.0000000 0.0000000
10 Percent Complete: Total/live time: 45.9061241 45.9061241
100 Percent Complete: Total/live time: 45.9061241 45.9061241
Number of attitude steps used: 2
Number of attitude steps avail: 253
Mean RA/DEC pixel offset: -36.7194 -41.2986
writing expo file: ad12002280s000502h.expo
closing attitude file...
closing data file...
-> Generating low and high energy images for ad12002280s000502h.evt
** XSELECT V1.3 **
!> Enter session name >[xsel] ad12002280s000502h
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:45:03 0.46E+02 1984 0010
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s000502h.evt
Total Good Bad: Region Time Phase Cut
1984 1984 0 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1984 1984 0 0 0 0
in 45.91 seconds
Image has 1984 counts for 43.22 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s000502h.evt
Total Good Bad: Region Time Phase Cut
1984 1327 0 0 0 657
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1984 1327 0 0 0 657
in 45.91 seconds
Image has 1327 counts for 28.91 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s000502h.evt
Total Good Bad: Region Time Phase Cut
1984 658 0 0 0 1326
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1984 658 0 0 0 1326
in 45.91 seconds
Image has 658 counts for 14.33 counts/sec
Command not found; type ? for a command listing
!ad12002280s000502h:ASCA >
!ad12002280s000502h:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!ad12002280s000502h:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!ad12002280s000502h:ASCA > read events ad12002280s000502h.evt
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!ad12002280s000502h:ASCA-SIS0-BRIGHT > set image sky
!ad12002280s000502h:ASCA-SIS0-BRIGHT > filter region corner_point.reg
!ad12002280s000502h:ASCA-SIS0-BRIGHT > extract image
!ad12002280s000502h:ASCA-SIS0-BRIGHT > save image outfile=ad12002280s000502h.img
Wrote image to file ad12002280s000502h.img
!ad12002280s000502h:ASCA-SIS0-BRIGHT > filter pha_cut 0 547
!ad12002280s000502h:ASCA-SIS0-BRIGHT > extract image
!ad12002280s000502h:ASCA-SIS0-BRIGHT > save image outfile=ad12002280s000502h_lo.img
Wrote image to file ad12002280s000502h_lo.img
!ad12002280s000502h:ASCA-SIS0-BRIGHT > clear pha_cut
!ad12002280s000502h:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound: 2048 is above the maximum value.
!ad12002280s000502h:ASCA-SIS0-BRIGHT > extract image
!ad12002280s000502h:ASCA-SIS0-BRIGHT > save image outfile=ad12002280s000502h_hi.img
Wrote image to file ad12002280s000502h_hi.img
!ad12002280s000502h:ASCA-SIS0-BRIGHT > exit save_session=no
-> Generating exposure map ad12002280s100102h.expo
ASCAEXPO_V0.9b
reading data file: ad12002280s100102h.evt
reading gti ext: STDGTI
reading hp ext: HOT_PIXELS
reading cal file: s1_teldef_ascalin.fits
making an inst map...
SIS AREA DISC ENABL ON
CHIP: 0 1 2 3
CCD POWER ON/OFF: ON OFF OFF OFF
AREA DISC IN/OUT: OUT OUT OUT OUT
AREA DISC H START: 6 6 6 6
AREA DISC H STOP: 306 425 425 425
AREA DISC V START: 180 2 2 2
AREA DISC V STOP: 422 422 422 422
reading att file: ./fa950804_0022.0336
making an exposure map...
Aspect RA/DEC/ROLL : 350.9870 58.8215 323.4231
Mean RA/DEC/ROLL : 351.0053 58.8084 323.4231
Pnt RA/DEC/ROLL : 350.9711 58.8308 323.4231
Image rebin factor : 4
Attitude Records : 11224
Hot Pixels : 9
GTI intervals : 20
Total GTI (secs) : 4191.475
Max attitude excursion (arcsecs) : 5.000
0 Percent Complete: Total/live time: 0.0000000 0.0000000
10 Percent Complete: Total/live time: 1782.5253906 1782.5253906
20 Percent Complete: Total/live time: 1782.5253906 1782.5253906
30 Percent Complete: Total/live time: 2091.5354004 2091.5354004
40 Percent Complete: Total/live time: 2091.5354004 2091.5354004
50 Percent Complete: Total/live time: 2427.0136719 2427.0136719
60 Percent Complete: Total/live time: 2701.5129395 2701.5129395
70 Percent Complete: Total/live time: 4191.4750977 4191.4750977
100 Percent Complete: Total/live time: 4191.4750977 4191.4750977
Number of attitude steps used: 11
Number of attitude steps avail: 8782
Mean RA/DEC pixel offset: -63.9947 -19.0214
writing expo file: ad12002280s100102h.expo
closing attitude file...
closing data file...
-> Generating low and high energy images for ad12002280s100102h.evt
** XSELECT V1.3 **
!> Enter session name >[xsel] ad12002280s100102h
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:46:11 0.42E+04 172965 1000
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s100102h.evt
Total Good Bad: Region Time Phase Cut
172965 172965 0 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
172965 172965 0 0 0 0
in 4191.47 seconds
Image has 172965 counts for 41.27 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s100102h.evt
Total Good Bad: Region Time Phase Cut
172965 113257 0 0 0 59708
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
172965 113257 0 0 0 59708
in 4191.47 seconds
Image has 113257 counts for 27.02 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s100102h.evt
Total Good Bad: Region Time Phase Cut
172965 59986 0 0 0 112979
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
172965 59986 0 0 0 112979
in 4191.47 seconds
Image has 59986 counts for 14.31 counts/sec
Command not found; type ? for a command listing
!ad12002280s100102h:ASCA >
!ad12002280s100102h:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!ad12002280s100102h:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!ad12002280s100102h:ASCA > read events ad12002280s100102h.evt
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!ad12002280s100102h:ASCA-SIS1-BRIGHT > set image sky
!ad12002280s100102h:ASCA-SIS1-BRIGHT > filter region corner_point.reg
!ad12002280s100102h:ASCA-SIS1-BRIGHT > extract image
!ad12002280s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad12002280s100102h.img
Wrote image to file ad12002280s100102h.img
!ad12002280s100102h:ASCA-SIS1-BRIGHT > filter pha_cut 0 547
!ad12002280s100102h:ASCA-SIS1-BRIGHT > extract image
!ad12002280s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad12002280s100102h_lo.img
Wrote image to file ad12002280s100102h_lo.img
!ad12002280s100102h:ASCA-SIS1-BRIGHT > clear pha_cut
!ad12002280s100102h:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound: 2048 is above the maximum value.
!ad12002280s100102h:ASCA-SIS1-BRIGHT > extract image
!ad12002280s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad12002280s100102h_hi.img
Wrote image to file ad12002280s100102h_hi.img
!ad12002280s100102h:ASCA-SIS1-BRIGHT > exit save_session=no
-> Generating exposure map ad12002280s100202m.expo
ASCAEXPO_V0.9b
reading data file: ad12002280s100202m.evt
reading gti ext: STDGTI
reading hp ext: HOT_PIXELS
reading cal file: s1_teldef_ascalin.fits
making an inst map...
SIS AREA DISC ENABL ON
CHIP: 0 1 2 3
CCD POWER ON/OFF: ON OFF OFF OFF
AREA DISC IN/OUT: OUT OUT OUT OUT
AREA DISC H START: 6 6 6 6
AREA DISC H STOP: 306 425 425 425
AREA DISC V START: 180 2 2 2
AREA DISC V STOP: 422 422 422 422
reading att file: ./fa950804_0022.0336
making an exposure map...
Aspect RA/DEC/ROLL : 350.9870 58.8215 323.4312
Mean RA/DEC/ROLL : 351.0128 58.8107 323.4312
Pnt RA/DEC/ROLL : 350.9681 58.8290 323.4312
Image rebin factor : 4
Attitude Records : 11224
Hot Pixels : 7
GTI intervals : 1
Total GTI (secs) : 243.746
Max attitude excursion (arcsecs) : 5.000
0 Percent Complete: Total/live time: 0.0000000 0.0000000
10 Percent Complete: Total/live time: 243.7463684 243.7463684
100 Percent Complete: Total/live time: 243.7463684 243.7463684
Number of attitude steps used: 2
Number of attitude steps avail: 137
Mean RA/DEC pixel offset: -38.5018 -3.4728
writing expo file: ad12002280s100202m.expo
closing attitude file...
closing data file...
-> Generating low and high energy images for ad12002280s100202m.evt
** XSELECT V1.3 **
!> Enter session name >[xsel] ad12002280s100202m
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C2 BRIGHT MEDIUM 04/08/95 00:34:51 0.24E+03 6807 1000
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s100202m.evt
Total Good Bad: Region Time Phase Cut
6807 6807 0 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
6807 6807 0 0 0 0
in 243.75 seconds
Image has 6807 counts for 27.93 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s100202m.evt
Total Good Bad: Region Time Phase Cut
6807 3439 0 0 0 3368
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
6807 3439 0 0 0 3368
in 243.75 seconds
Image has 3439 counts for 14.11 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s100202m.evt
Total Good Bad: Region Time Phase Cut
6807 3385 0 0 0 3422
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
6807 3385 0 0 0 3422
in 243.75 seconds
Image has 3385 counts for 13.89 counts/sec
Command not found; type ? for a command listing
!ad12002280s100202m:ASCA >
!ad12002280s100202m:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!ad12002280s100202m:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!ad12002280s100202m:ASCA > read events ad12002280s100202m.evt
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!ad12002280s100202m:ASCA-SIS1-BRIGHT > set image sky
!ad12002280s100202m:ASCA-SIS1-BRIGHT > filter region corner_point.reg
!ad12002280s100202m:ASCA-SIS1-BRIGHT > extract image
!ad12002280s100202m:ASCA-SIS1-BRIGHT > save image outfile=ad12002280s100202m.img
Wrote image to file ad12002280s100202m.img
!ad12002280s100202m:ASCA-SIS1-BRIGHT > filter pha_cut 0 547
!ad12002280s100202m:ASCA-SIS1-BRIGHT > extract image
!ad12002280s100202m:ASCA-SIS1-BRIGHT > save image outfile=ad12002280s100202m_lo.img
Wrote image to file ad12002280s100202m_lo.img
!ad12002280s100202m:ASCA-SIS1-BRIGHT > clear pha_cut
!ad12002280s100202m:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound: 2048 is above the maximum value.
!ad12002280s100202m:ASCA-SIS1-BRIGHT > extract image
!ad12002280s100202m:ASCA-SIS1-BRIGHT > save image outfile=ad12002280s100202m_hi.img
Wrote image to file ad12002280s100202m_hi.img
!ad12002280s100202m:ASCA-SIS1-BRIGHT > exit save_session=no
-> Generating exposure map ad12002280s100502h.expo
ASCAEXPO_V0.9b
reading data file: ad12002280s100502h.evt
reading gti ext: STDGTI
reading hp ext: HOT_PIXELS
reading cal file: s1_teldef_ascalin.fits
making an inst map...
SIS AREA DISC ENABL ON
CHIP: 0 1 2 3
CCD POWER ON/OFF: ON OFF OFF OFF
AREA DISC IN/OUT: OUT OUT OUT OUT
AREA DISC H START: 6 6 6 6
AREA DISC H STOP: 306 425 425 425
AREA DISC V START: 180 2 2 2
AREA DISC V STOP: 422 422 422 422
reading att file: ./fa950804_0022.0336
making an exposure map...
Aspect RA/DEC/ROLL : 350.9870 58.8215 323.4296
Mean RA/DEC/ROLL : 351.0110 58.8098 323.4296
Pnt RA/DEC/ROLL : 350.9707 58.8302 323.4296
Image rebin factor : 4
Attitude Records : 11224
Hot Pixels : 0
GTI intervals : 2
Total GTI (secs) : 23.937
Max attitude excursion (arcsecs) : 5.000
0 Percent Complete: Total/live time: 0.0000000 0.0000000
10 Percent Complete: Total/live time: 23.9374371 23.9374371
100 Percent Complete: Total/live time: 23.9374371 23.9374371
Number of attitude steps used: 2
Number of attitude steps avail: 208
Mean RA/DEC pixel offset: -38.1920 -5.0792
writing expo file: ad12002280s100502h.expo
closing attitude file...
closing data file...
-> Generating low and high energy images for ad12002280s100502h.evt
** XSELECT V1.3 **
!> Enter session name >[xsel] ad12002280s100502h
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:45:31 0.24E+02 1041 1000
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s100502h.evt
Total Good Bad: Region Time Phase Cut
1041 1041 0 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1041 1041 0 0 0 0
in 23.94 seconds
Image has 1041 counts for 43.49 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s100502h.evt
Total Good Bad: Region Time Phase Cut
1041 651 0 0 0 390
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1041 651 0 0 0 390
in 23.94 seconds
Image has 651 counts for 27.20 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s100502h.evt
Total Good Bad: Region Time Phase Cut
1041 392 0 0 0 649
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1041 392 0 0 0 649
in 23.94 seconds
Image has 392 counts for 16.38 counts/sec
Command not found; type ? for a command listing
!ad12002280s100502h:ASCA >
!ad12002280s100502h:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!ad12002280s100502h:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!ad12002280s100502h:ASCA > read events ad12002280s100502h.evt
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!ad12002280s100502h:ASCA-SIS1-BRIGHT > set image sky
!ad12002280s100502h:ASCA-SIS1-BRIGHT > filter region corner_point.reg
!ad12002280s100502h:ASCA-SIS1-BRIGHT > extract image
!ad12002280s100502h:ASCA-SIS1-BRIGHT > save image outfile=ad12002280s100502h.img
Wrote image to file ad12002280s100502h.img
!ad12002280s100502h:ASCA-SIS1-BRIGHT > filter pha_cut 0 547
!ad12002280s100502h:ASCA-SIS1-BRIGHT > extract image
!ad12002280s100502h:ASCA-SIS1-BRIGHT > save image outfile=ad12002280s100502h_lo.img
Wrote image to file ad12002280s100502h_lo.img
!ad12002280s100502h:ASCA-SIS1-BRIGHT > clear pha_cut
!ad12002280s100502h:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound: 2048 is above the maximum value.
!ad12002280s100502h:ASCA-SIS1-BRIGHT > extract image
!ad12002280s100502h:ASCA-SIS1-BRIGHT > save image outfile=ad12002280s100502h_hi.img
Wrote image to file ad12002280s100502h_hi.img
!ad12002280s100502h:ASCA-SIS1-BRIGHT > exit save_session=no
-> Summing sis imagesad12002280s000102h.expo ad12002280s000202m.expo ad12002280s000502h.expo ad12002280s100102h.expo ad12002280s100202m.expo ad12002280s100502h.expo-> Summing the following images to produce ad12002280sis32002_all.totsky
ad12002280s000102h.img ad12002280s000202m.img ad12002280s000502h.img ad12002280s100102h.img ad12002280s100202m.img ad12002280s100502h.img-> Summing the following images to produce ad12002280sis32002_lo.totsky
ad12002280s000102h_lo.img ad12002280s000202m_lo.img ad12002280s000502h_lo.img ad12002280s100102h_lo.img ad12002280s100202m_lo.img ad12002280s100502h_lo.img-> Summing the following images to produce ad12002280sis32002_hi.totsky
ad12002280s000102h_hi.img ad12002280s000202m_hi.img ad12002280s000502h_hi.img ad12002280s100102h_hi.img ad12002280s100202m_hi.img ad12002280s100502h_hi.img-> Running XIMAGE to create ad12002280sis32002.gif
No of detectors read in: 20 ![1]XIMAGE> read/fits ad12002280sis32002_all.totsky Reading an image Telescope ASCA SIS0 Image display size = 320 Done, closing file Largest, Smallest 340.000 0. Bscale, Bzero from file 1.0000000000000 0. After internal scaling Bscale and Bzero 1.0000000000000 0. Image level, max: 340 min: 0 ![2]XIMAGE> read/exp_map ad12002280sis32002.totexpo Reading an image Telescope ASCA SIS0 Image display size = 320 Done, closing file Largest, Smallest 149.338 0. Bscale, Bzero from file 1.0000000000000 0. After internal scaling Bscale and Bzero 1.0000000000000 0. Image level, max: 149 min: 0 ![3]XIMAGE> smooth ![4]XIMAGE> cpd /ppm ![5]XIMAGE> cey 2000 ![6]XIMAGE> disp/correct/noframe Displaying image The image is exposure corrected Min = 0 max = 32767 ![7]XIMAGE> grid ![8]XIMAGE> scale scal_f, min_inten 1.00000 0. i,inten,mm,pp 1 0. 0 0 i,inten,mm,pp 2 20.0000 20 0 i,inten,mm,pp 3 63.0000 63 0 i,inten,mm,pp 4 183.000 183 0 ![9]XIMAGE> exit-> Summing gis images
ad12002280g200170h.expo ad12002280g200270m.expo ad12002280g200370l.expo ad12002280g300170h.expo ad12002280g300270m.expo ad12002280g300370l.expo-> Summing the following images to produce ad12002280gis25670_all.totsky
ad12002280g200170h.img ad12002280g200270m.img ad12002280g200370l.img ad12002280g300170h.img ad12002280g300270m.img ad12002280g300370l.img-> Summing the following images to produce ad12002280gis25670_lo.totsky
ad12002280g200170h_lo.img ad12002280g200270m_lo.img ad12002280g200370l_lo.img ad12002280g300170h_lo.img ad12002280g300270m_lo.img ad12002280g300370l_lo.img-> Summing the following images to produce ad12002280gis25670_hi.totsky
ad12002280g200170h_hi.img ad12002280g200270m_hi.img ad12002280g200370l_hi.img ad12002280g300170h_hi.img ad12002280g300270m_hi.img ad12002280g300370l_hi.img-> Running XIMAGE to create ad12002280gis25670.gif
No of detectors read in: 20 ![1]XIMAGE> read/fits ad12002280gis25670_all.totsky Reading an image Telescope ASCA GIS2 Image display size = 256 Done, closing file Largest, Smallest 935.000 0. Bscale, Bzero from file 1.0000000000000 0. After internal scaling Bscale and Bzero 1.0000000000000 0. Image level, max: 935 min: 0 ![2]XIMAGE> read/exp_map ad12002280gis25670.totexpo Reading an image Telescope ASCA GIS2 Image display size = 256 Done, closing file Largest, Smallest 164.667 0. Bscale, Bzero from file 1.0000000000000 0. After internal scaling Bscale and Bzero 1.0000000000000 0. Image level, max: 164 min: 0 ![3]XIMAGE> smooth ![4]XIMAGE> cpd /ppm ![5]XIMAGE> cey 2000 ![6]XIMAGE> disp/correct/noframe Displaying image The image is exposure corrected Min = 0 max = 3952 ![7]XIMAGE> grid ![8]XIMAGE> scale scal_f, min_inten 1.00000 0. i,inten,mm,pp 1 0. 0 0 i,inten,mm,pp 2 4.00000 40 -1 i,inten,mm,pp 3 15.0000 15 0 i,inten,mm,pp 4 84.0000 84 0 ![9]XIMAGE> exit
139 127 0.0794084 99 16 2126.89-> Smoothing ad12002280gis25670_hi.totsky with ad12002280gis25670.totexpo
141 124 0.0304206 102 16 1519.65-> Smoothing ad12002280gis25670_lo.totsky with ad12002280gis25670.totexpo
138 129 0.0507872 98 16 2686.66-> Determining extraction radii
139 127 24 T-> Standard Output From STOOL colorpic:
color plane 0 color plane 1 color plane 2 writing image image written-> Creating fits catalog of sources: ad12002280gis25670.src
182 151 0.0309421 79 41 100.037-> Smoothing ad12002280sis32002_hi.totsky with ad12002280sis32002.totexpo
182 151 0.0116134 79 40 104.817-> Smoothing ad12002280sis32002_lo.totsky with ad12002280sis32002.totexpo
199 173 0.0204855 69 31 100.392-> Determining extraction radii
182 151 41 T-> Standard Output From STOOL colorpic:
color plane 0 color plane 1 color plane 2 writing image image written-> Creating fits catalog of sources: ad12002280sis32002.src
The sum of the selected column is 93160.000 The mean of the selected column is 656.05634 The standard deviation of the selected column is 2.0517235 The minimum of selected column is 651.00000 The maximum of selected column is 660.00000 The number of points used in calculation is 142-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 72780.000 The mean of the selected column is 512.53521 The standard deviation of the selected column is 3.4201364 The minimum of selected column is 507.00000 The maximum of selected column is 523.00000 The number of points used in calculation is 142-> Converting (728.0,604.0,2.0) to s1 detector coordinates
The sum of the selected column is 60119.000 The mean of the selected column is 653.46739 The standard deviation of the selected column is 2.1404071 The minimum of selected column is 648.00000 The maximum of selected column is 657.00000 The number of points used in calculation is 92-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 50475.000 The mean of the selected column is 548.64130 The standard deviation of the selected column is 3.7900434 The minimum of selected column is 542.00000 The maximum of selected column is 558.00000 The number of points used in calculation is 92-> Converting (139.0,127.0,2.0) to g2 detector coordinates
The sum of the selected column is 746644.00 The mean of the selected column is 129.28900 The standard deviation of the selected column is 1.1156421 The minimum of selected column is 127.00000 The maximum of selected column is 132.00000 The number of points used in calculation is 5775-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 691765.00 The mean of the selected column is 119.78615 The standard deviation of the selected column is 1.1651691 The minimum of selected column is 117.00000 The maximum of selected column is 123.00000 The number of points used in calculation is 5775-> Converting (139.0,127.0,2.0) to g3 detector coordinates
The sum of the selected column is 745817.00 The mean of the selected column is 135.28333 The standard deviation of the selected column is 1.1103352 The minimum of selected column is 133.00000 The maximum of selected column is 138.00000 The number of points used in calculation is 5513-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 663575.00 The mean of the selected column is 120.36550 The standard deviation of the selected column is 1.1700885 The minimum of selected column is 118.00000 The maximum of selected column is 123.00000 The number of points used in calculation is 5513
1 ad12002280s000102h.evt 234247 1 ad12002280s000502h.evt 234247 2 ad12002280s000202m.evt 6363-> Fetching SIS0_NOTCHIP0.1
ad12002280s000102h.evt ad12002280s000502h.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:46:11 0.42E+04 232263 0010
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:46:11 0.42E+04 232263 0010
2 CAS_A_C2 BRIGHT HIGH 04/08/95 00:45:03 0.46E+02 1984 0010
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s000102h.evt
Total Good Bad: Region Time Phase Cut
232263 199571 32692 0 0 0
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s000502h.evt
Total Good Bad: Region Time Phase Cut
1984 1690 294 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
234247 201261 32986 0 0 0
in 4257.38 seconds
Spectrum has 201261 counts for 47.27 counts/sec
-------------------------
MANDATORY KEYWORDS/VALUES
-------------------------
--------------------------------------------------------------------
--------------------------------------------------------------------
EXTNAME - SPECTRUM Name of this BINTABLE
TELESCOP - ASCA Mission/Satellite name
INSTRUME - SIS0 Instrument/Detector
FILTER - Instrument filter in use
EXPOSURE - 4257.4 Integration time (in secs) of PHA data
AREASCAL - 1.0000 Area scaling factor
BACKSCAL - 2.53027E-02 Background scaling factor
BACKFILE - NONE Associated background file
CORRSCAL - 1.0000 Correlation scaling factor
CORRFILE - none Associated correlation file
RESPFILE - NONE Associated redistribution matrix file
ANCRFILE - none Associated ancillary response file
XFLT0001 - none XSPEC selection filter
POISSERR - TRUE Whether Poissonian errors apply
CHANTYPE - PI Whether channels have been corrected
TLMIN1 - 0 First legal Detector channel
DETCHANS - 512 No. of legal detector channels
NCHAN - 512 No. of detector channels in dataset
PHAVERSN - 1.1.0 OGIP FITS version number
STAT_ERR - FALSE Statistical Error
SYS_ERR - TRUE Fractional Systematic Error
QUALITY - TRUE Quality Flag
GROUPING - FALSE Grouping Flag
--------------------------------------------------------------------
--------------------------------------------------------------------
... QUALITY
...
... -------
... QUALITY
... -------
... Bad Channels (Channel - Channel)
... ---------------------------------------------
... 0 - 12 have quality 5
... ---------------------------------------------
...
...... exiting, changes written to file : ad12002280s010102_1.pi
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280s000102h.evt
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-SIS0-BRIGHT > read events ad12002280s000502h.evt
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 2
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-SIS0-BRIGHT > set phaname PI
!xsel:ASCA-SIS0-BRIGHT > filter region ad12002280s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP0.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP1.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.1
!xsel:ASCA-SIS0-BRIGHT > filter region ad12002280s010102.discrim
!xsel:ASCA-SIS0-BRIGHT > extract spectrum
!xsel:ASCA-SIS0-BRIGHT > save spectrum ad12002280s010102_1.pi group=yes
Wrote spectrum to ad12002280s010102_1.pi
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no
-> Grouping ad12002280s010102_1.pi to 40 counts/bin------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS0 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 4257.4 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.53027E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 12 of undefined grouping (Channel quality=bad) ... 13 - 31 are grouped by a factor 19 ... 32 - 201 are single channels ... 202 - 203 are grouped by a factor 2 ... 204 - 206 are single channels ... 207 - 208 are grouped by a factor 2 ... 209 - 210 are single channels ... 211 - 220 are grouped by a factor 2 ... 221 - 232 are single channels ... 233 - 240 are grouped by a factor 2 ... 241 - 243 are grouped by a factor 3 ... 244 - 247 are grouped by a factor 4 ... 248 - 253 are grouped by a factor 3 ... 254 - 259 are grouped by a factor 6 ... 260 - 264 are grouped by a factor 5 ... 265 - 272 are grouped by a factor 8 ... 273 - 279 are grouped by a factor 7 ... 280 - 289 are grouped by a factor 10 ... 290 - 303 are grouped by a factor 14 ... 304 - 325 are grouped by a factor 22 ... 326 - 511 of undefined grouping (Channel quality=bad) ... --------------------------------------------- ... ...... exiting, changes written to file : ad12002280s010102_1.pi ** grppha 2.6.0 completed successfully-> Source occupies chip(s) 2
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x512 S0C2 Bright PI RMF Calibration data from ./ Please stand by... ...Done.-> Generating ad12002280s010102_1.arf with point=no
ASCAARF vers 2.72 14 Mar 1997.
Input WMAP array has size 23 by 35 bins
expanded to 23 by 35 bins
First WMAP bin is at detector pixel 648 352
8 detector pixels per WMAP bin
WMAP bin size is 0.21600 mm
0.21216 arcmin
Selected region size is 29.156 arcmin^2
Optical axis is detector pixel 662.72 559.02
1180 energies from RMF file
Effective area fudge applied
Arf filter applied
Total counts in region = 2.01214E+05
Weighted mean angle from optical axis = 2.602 arcmin
-> SIS0_NOTCHIP0.1 already present in current directoryad12002280s000202m.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C2 BRIGHT MEDIUM 04/08/95 00:34:51 0.24E+03 6363 0010
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s000202m.evt
Total Good Bad: Region Time Phase Cut
6363 5478 885 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
6363 5478 885 0 0 0
in 243.75 seconds
Spectrum has 5478 counts for 22.47 counts/sec
-------------------------
MANDATORY KEYWORDS/VALUES
-------------------------
--------------------------------------------------------------------
--------------------------------------------------------------------
EXTNAME - SPECTRUM Name of this BINTABLE
TELESCOP - ASCA Mission/Satellite name
INSTRUME - SIS0 Instrument/Detector
FILTER - Instrument filter in use
EXPOSURE - 243.75 Integration time (in secs) of PHA data
AREASCAL - 1.0000 Area scaling factor
BACKSCAL - 2.53027E-02 Background scaling factor
BACKFILE - NONE Associated background file
CORRSCAL - 1.0000 Correlation scaling factor
CORRFILE - none Associated correlation file
RESPFILE - NONE Associated redistribution matrix file
ANCRFILE - none Associated ancillary response file
XFLT0001 - none XSPEC selection filter
POISSERR - TRUE Whether Poissonian errors apply
CHANTYPE - PI Whether channels have been corrected
TLMIN1 - 0 First legal Detector channel
DETCHANS - 512 No. of legal detector channels
NCHAN - 512 No. of detector channels in dataset
PHAVERSN - 1.1.0 OGIP FITS version number
STAT_ERR - FALSE Statistical Error
SYS_ERR - TRUE Fractional Systematic Error
QUALITY - TRUE Quality Flag
GROUPING - FALSE Grouping Flag
--------------------------------------------------------------------
--------------------------------------------------------------------
... QUALITY
...
... -------
... QUALITY
... -------
... Bad Channels (Channel - Channel)
... ---------------------------------------------
... 0 - 12 have quality 5
... ---------------------------------------------
...
...... exiting, changes written to file : ad12002280s010202_1.pi
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280s000202m.evt
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-SIS0-BRIGHT > set phaname PI
!xsel:ASCA-SIS0-BRIGHT > filter region ad12002280s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP0.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP1.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.1
!xsel:ASCA-SIS0-BRIGHT > filter region ad12002280s010202.discrim
!xsel:ASCA-SIS0-BRIGHT > extract spectrum
!xsel:ASCA-SIS0-BRIGHT > save spectrum ad12002280s010202_1.pi group=yes
Wrote spectrum to ad12002280s010202_1.pi
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no
-> Grouping ad12002280s010202_1.pi to 40 counts/bin------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS0 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 243.75 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.53027E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 12 of undefined grouping (Channel quality=bad) ... 13 - 53 are grouped by a factor 41 ... 54 - 90 are single channels ... 91 - 110 are grouped by a factor 2 ... 111 - 122 are grouped by a factor 3 ... 123 - 126 are grouped by a factor 4 ... 127 - 132 are grouped by a factor 3 ... 133 - 136 are grouped by a factor 4 ... 137 - 142 are grouped by a factor 6 ... 143 - 149 are grouped by a factor 7 ... 150 - 158 are grouped by a factor 9 ... 159 - 166 are grouped by a factor 8 ... 167 - 181 are grouped by a factor 15 ... 182 - 214 are grouped by a factor 33 ... 215 - 511 of undefined grouping (Channel quality=bad) ... --------------------------------------------- ... ...... exiting, changes written to file : ad12002280s010202_1.pi ** grppha 2.6.0 completed successfully-> Source occupies chip(s) 2
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x512 S0C2 Bright PI RMF Calibration data from ./ Please stand by... ...Done.-> Generating ad12002280s010202_1.arf with point=no
ASCAARF vers 2.72 14 Mar 1997.
Input WMAP array has size 23 by 35 bins
expanded to 23 by 35 bins
First WMAP bin is at detector pixel 648 352
8 detector pixels per WMAP bin
WMAP bin size is 0.21600 mm
0.21216 arcmin
Selected region size is 29.156 arcmin^2
Optical axis is detector pixel 662.72 559.02
1180 energies from RMF file
Effective area fudge applied
Arf filter applied
Total counts in region = 5.43400E+03
Weighted mean angle from optical axis = 2.592 arcmin
-> Standard Output From STOOL group_event_files:1 ad12002280s000112h.evt 233059-> SIS0_NOTCHIP0.1 already present in current directory
ad12002280s000112h.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C2 BRIGHT2 HIGH 04/08/95 00:46:11 0.42E+04 233059 0010
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s000112h.evt
Total Good Bad: Region Time Phase Cut
233059 200273 32786 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
233059 200273 32786 0 0 0
in 4211.47 seconds
Spectrum has 200273 counts for 47.55 counts/sec
-------------------------
MANDATORY KEYWORDS/VALUES
-------------------------
--------------------------------------------------------------------
--------------------------------------------------------------------
EXTNAME - SPECTRUM Name of this BINTABLE
TELESCOP - ASCA Mission/Satellite name
INSTRUME - SIS0 Instrument/Detector
FILTER - Instrument filter in use
EXPOSURE - 4211.5 Integration time (in secs) of PHA data
AREASCAL - 1.0000 Area scaling factor
BACKSCAL - 2.53027E-02 Background scaling factor
BACKFILE - NONE Associated background file
CORRSCAL - 1.0000 Correlation scaling factor
CORRFILE - none Associated correlation file
RESPFILE - NONE Associated redistribution matrix file
ANCRFILE - none Associated ancillary response file
XFLT0001 - none XSPEC selection filter
POISSERR - TRUE Whether Poissonian errors apply
CHANTYPE - PI Whether channels have been corrected
TLMIN1 - 0 First legal Detector channel
DETCHANS - 1024 No. of legal detector channels
NCHAN - 1024 No. of detector channels in dataset
PHAVERSN - 1.1.0 OGIP FITS version number
STAT_ERR - FALSE Statistical Error
SYS_ERR - TRUE Fractional Systematic Error
QUALITY - TRUE Quality Flag
GROUPING - FALSE Grouping Flag
--------------------------------------------------------------------
--------------------------------------------------------------------
... QUALITY
...
... -------
... QUALITY
... -------
... Bad Channels (Channel - Channel)
... ---------------------------------------------
... 0 - 25 have quality 5
... ---------------------------------------------
...
...... exiting, changes written to file : ad12002280s010312_1.pi
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280s000112h.evt
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 4095
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-SIS0-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad12002280s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP0.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP1.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_OFFCHIP.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad12002280s010312.discrim
!xsel:ASCA-SIS0-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS0-BRIGHT2 > save spectrum ad12002280s010312_1.pi group=yes
Wrote spectrum to ad12002280s010312_1.pi
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Grouping ad12002280s010312_1.pi to 40 counts/bin------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS0 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 4211.5 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.53027E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 1024 No. of legal detector channels NCHAN - 1024 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 25 of undefined grouping (Channel quality=bad) ... 26 - 63 are grouped by a factor 38 ... 64 - 347 are single channels ... 348 - 349 are grouped by a factor 2 ... 350 - 353 are single channels ... 354 - 357 are grouped by a factor 2 ... 358 - 358 are single channels ... 359 - 360 are grouped by a factor 2 ... 361 - 363 are single channels ... 364 - 365 are grouped by a factor 2 ... 366 - 367 are single channels ... 368 - 371 are grouped by a factor 2 ... 372 - 372 are single channels ... 373 - 376 are grouped by a factor 2 ... 377 - 377 are single channels ... 378 - 387 are grouped by a factor 2 ... 388 - 388 are single channels ... 389 - 404 are grouped by a factor 2 ... 405 - 407 are grouped by a factor 3 ... 408 - 413 are grouped by a factor 2 ... 414 - 416 are grouped by a factor 3 ... 417 - 420 are grouped by a factor 2 ... 421 - 423 are grouped by a factor 3 ... 424 - 425 are grouped by a factor 2 ... 426 - 440 are grouped by a factor 3 ... 441 - 452 are grouped by a factor 2 ... 453 - 455 are single channels ... 456 - 459 are grouped by a factor 2 ... 460 - 460 are single channels ... 461 - 466 are grouped by a factor 2 ... 467 - 475 are grouped by a factor 3 ... 476 - 493 are grouped by a factor 6 ... 494 - 498 are grouped by a factor 5 ... 499 - 506 are grouped by a factor 8 ... 507 - 515 are grouped by a factor 9 ... 516 - 523 are grouped by a factor 8 ... 524 - 533 are grouped by a factor 10 ... 534 - 545 are grouped by a factor 12 ... 546 - 558 are grouped by a factor 13 ... 559 - 570 are grouped by a factor 12 ... 571 - 592 are grouped by a factor 22 ... 593 - 619 are grouped by a factor 27 ... 620 - 656 are grouped by a factor 37 ... 657 - 1023 of undefined grouping (Channel quality=bad) ... --------------------------------------------- ... ...... exiting, changes written to file : ad12002280s010312_1.pi ** grppha 2.6.0 completed successfully-> Source occupies chip(s) 2
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x1024 S0C2 Bright2 PI RMF Calibration data from ./ Please stand by... ...Done.-> Generating ad12002280s010312_1.arf with point=no
ASCAARF vers 2.72 14 Mar 1997.
Input WMAP array has size 23 by 35 bins
expanded to 23 by 35 bins
First WMAP bin is at detector pixel 648 352
8 detector pixels per WMAP bin
WMAP bin size is 0.21600 mm
0.21216 arcmin
Selected region size is 29.156 arcmin^2
Optical axis is detector pixel 662.72 559.02
1180 energies from RMF file
Effective area fudge applied
Arf filter applied
Total counts in region = 2.00226E+05
Weighted mean angle from optical axis = 2.603 arcmin
-> Standard Output From STOOL group_event_files:1 ad12002280s100102h.evt 174006 1 ad12002280s100502h.evt 174006 2 ad12002280s100202m.evt 6807-> Fetching SIS1_NOTCHIP1.1
ad12002280s100102h.evt ad12002280s100502h.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:46:11 0.42E+04 172965 1000
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:46:11 0.42E+04 172965 1000
2 CAS_A_C2 BRIGHT HIGH 04/08/95 00:45:31 0.24E+02 1041 1000
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s100102h.evt
Total Good Bad: Region Time Phase Cut
172965 151040 21925 0 0 0
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s100502h.evt
Total Good Bad: Region Time Phase Cut
1041 909 132 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
174006 151949 22057 0 0 0
in 4215.41 seconds
Spectrum has 151949 counts for 36.05 counts/sec
-------------------------
MANDATORY KEYWORDS/VALUES
-------------------------
--------------------------------------------------------------------
--------------------------------------------------------------------
EXTNAME - SPECTRUM Name of this BINTABLE
TELESCOP - ASCA Mission/Satellite name
INSTRUME - SIS1 Instrument/Detector
FILTER - Instrument filter in use
EXPOSURE - 4215.4 Integration time (in secs) of PHA data
AREASCAL - 1.0000 Area scaling factor
BACKSCAL - 2.17285E-02 Background scaling factor
BACKFILE - NONE Associated background file
CORRSCAL - 1.0000 Correlation scaling factor
CORRFILE - none Associated correlation file
RESPFILE - NONE Associated redistribution matrix file
ANCRFILE - none Associated ancillary response file
XFLT0001 - none XSPEC selection filter
POISSERR - TRUE Whether Poissonian errors apply
CHANTYPE - PI Whether channels have been corrected
TLMIN1 - 0 First legal Detector channel
DETCHANS - 512 No. of legal detector channels
NCHAN - 512 No. of detector channels in dataset
PHAVERSN - 1.1.0 OGIP FITS version number
STAT_ERR - FALSE Statistical Error
SYS_ERR - TRUE Fractional Systematic Error
QUALITY - TRUE Quality Flag
GROUPING - FALSE Grouping Flag
--------------------------------------------------------------------
--------------------------------------------------------------------
... QUALITY
...
... -------
... QUALITY
... -------
... Bad Channels (Channel - Channel)
... ---------------------------------------------
... 0 - 12 have quality 5
... ---------------------------------------------
...
...... exiting, changes written to file : ad12002280s110102_1.pi
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280s100102h.evt
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-SIS1-BRIGHT > read events ad12002280s100502h.evt
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 2
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-SIS1-BRIGHT > set phaname PI
!xsel:ASCA-SIS1-BRIGHT > filter region ad12002280s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP3.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.1
!xsel:ASCA-SIS1-BRIGHT > filter region ad12002280s110102.discrim
!xsel:ASCA-SIS1-BRIGHT > extract spectrum
!xsel:ASCA-SIS1-BRIGHT > save spectrum ad12002280s110102_1.pi group=yes
Wrote spectrum to ad12002280s110102_1.pi
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no
-> Grouping ad12002280s110102_1.pi to 40 counts/bin------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS1 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 4215.4 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.17285E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 12 of undefined grouping (Channel quality=bad) ... 13 - 20 are grouped by a factor 8 ... 21 - 183 are single channels ... 184 - 185 are grouped by a factor 2 ... 186 - 193 are single channels ... 194 - 195 are grouped by a factor 2 ... 196 - 196 are single channels ... 197 - 198 are grouped by a factor 2 ... 199 - 199 are single channels ... 200 - 219 are grouped by a factor 2 ... 220 - 220 are single channels ... 221 - 224 are grouped by a factor 2 ... 225 - 233 are single channels ... 234 - 237 are grouped by a factor 2 ... 238 - 240 are grouped by a factor 3 ... 241 - 250 are grouped by a factor 5 ... 251 - 257 are grouped by a factor 7 ... 258 - 263 are grouped by a factor 6 ... 264 - 270 are grouped by a factor 7 ... 271 - 278 are grouped by a factor 8 ... 279 - 291 are grouped by a factor 13 ... 292 - 307 are grouped by a factor 16 ... 308 - 352 are grouped by a factor 45 ... 353 - 511 of undefined grouping (Channel quality=bad) ... --------------------------------------------- ... ...... exiting, changes written to file : ad12002280s110102_1.pi ** grppha 2.6.0 completed successfully-> Source occupies chip(s) 0
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x512 S1C0 Bright PI RMF Calibration data from ./ Please stand by... ...Done.-> Generating ad12002280s110102_1.arf with point=no
ASCAARF vers 2.72 14 Mar 1997.
Input WMAP array has size 23 by 32 bins
expanded to 23 by 32 bins
First WMAP bin is at detector pixel 648 384
8 detector pixels per WMAP bin
WMAP bin size is 0.21600 mm
0.21216 arcmin
Selected region size is 25.038 arcmin^2
Optical axis is detector pixel 618.28 773.83
1180 energies from RMF file
Effective area fudge applied
Arf filter applied
Total counts in region = 1.51905E+05
Weighted mean angle from optical axis = 6.688 arcmin
-> SIS1_NOTCHIP1.1 already present in current directoryad12002280s100202m.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C2 BRIGHT MEDIUM 04/08/95 00:34:51 0.24E+03 6807 1000
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s100202m.evt
Total Good Bad: Region Time Phase Cut
6807 5950 857 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
6807 5950 857 0 0 0
in 243.75 seconds
Spectrum has 5950 counts for 24.41 counts/sec
-------------------------
MANDATORY KEYWORDS/VALUES
-------------------------
--------------------------------------------------------------------
--------------------------------------------------------------------
EXTNAME - SPECTRUM Name of this BINTABLE
TELESCOP - ASCA Mission/Satellite name
INSTRUME - SIS1 Instrument/Detector
FILTER - Instrument filter in use
EXPOSURE - 243.75 Integration time (in secs) of PHA data
AREASCAL - 1.0000 Area scaling factor
BACKSCAL - 2.17285E-02 Background scaling factor
BACKFILE - NONE Associated background file
CORRSCAL - 1.0000 Correlation scaling factor
CORRFILE - none Associated correlation file
RESPFILE - NONE Associated redistribution matrix file
ANCRFILE - none Associated ancillary response file
XFLT0001 - none XSPEC selection filter
POISSERR - TRUE Whether Poissonian errors apply
CHANTYPE - PI Whether channels have been corrected
TLMIN1 - 0 First legal Detector channel
DETCHANS - 512 No. of legal detector channels
NCHAN - 512 No. of detector channels in dataset
PHAVERSN - 1.1.0 OGIP FITS version number
STAT_ERR - FALSE Statistical Error
SYS_ERR - TRUE Fractional Systematic Error
QUALITY - TRUE Quality Flag
GROUPING - FALSE Grouping Flag
--------------------------------------------------------------------
--------------------------------------------------------------------
... QUALITY
...
... -------
... QUALITY
... -------
... Bad Channels (Channel - Channel)
... ---------------------------------------------
... 0 - 12 have quality 5
... ---------------------------------------------
...
...... exiting, changes written to file : ad12002280s110202_1.pi
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280s100202m.evt
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-SIS1-BRIGHT > set phaname PI
!xsel:ASCA-SIS1-BRIGHT > filter region ad12002280s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP3.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.1
!xsel:ASCA-SIS1-BRIGHT > filter region ad12002280s110202.discrim
!xsel:ASCA-SIS1-BRIGHT > extract spectrum
!xsel:ASCA-SIS1-BRIGHT > save spectrum ad12002280s110202_1.pi group=yes
Wrote spectrum to ad12002280s110202_1.pi
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no
-> Grouping ad12002280s110202_1.pi to 40 counts/bin------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS1 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 243.75 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.17285E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 12 of undefined grouping (Channel quality=bad) ... 13 - 48 are grouped by a factor 36 ... 49 - 87 are single channels ... 88 - 105 are grouped by a factor 2 ... 106 - 106 are single channels ... 107 - 112 are grouped by a factor 2 ... 113 - 115 are grouped by a factor 3 ... 116 - 119 are grouped by a factor 4 ... 120 - 137 are grouped by a factor 3 ... 138 - 141 are grouped by a factor 4 ... 142 - 146 are grouped by a factor 5 ... 147 - 152 are grouped by a factor 6 ... 153 - 157 are grouped by a factor 5 ... 158 - 164 are grouped by a factor 7 ... 165 - 173 are grouped by a factor 9 ... 174 - 184 are grouped by a factor 11 ... 185 - 198 are grouped by a factor 14 ... 199 - 223 are grouped by a factor 25 ... 224 - 261 are grouped by a factor 38 ... 262 - 511 of undefined grouping (Channel quality=bad) ... --------------------------------------------- ... ...... exiting, changes written to file : ad12002280s110202_1.pi ** grppha 2.6.0 completed successfully-> Source occupies chip(s) 0
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x512 S1C0 Bright PI RMF Calibration data from ./ Please stand by... ...Done.-> Generating ad12002280s110202_1.arf with point=no
ASCAARF vers 2.72 14 Mar 1997.
Input WMAP array has size 23 by 32 bins
expanded to 23 by 32 bins
First WMAP bin is at detector pixel 648 384
8 detector pixels per WMAP bin
WMAP bin size is 0.21600 mm
0.21216 arcmin
Selected region size is 25.038 arcmin^2
Optical axis is detector pixel 618.28 773.83
1180 energies from RMF file
Effective area fudge applied
Arf filter applied
Total counts in region = 5.90900E+03
Weighted mean angle from optical axis = 6.714 arcmin
-> Standard Output From STOOL group_event_files:1 ad12002280s100112h.evt 173142-> SIS1_NOTCHIP1.1 already present in current directory
ad12002280s100112h.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C2 BRIGHT2 HIGH 04/08/95 00:46:11 0.42E+04 173142 1000
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s100112h.evt
Total Good Bad: Region Time Phase Cut
173142 151211 21931 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
173142 151211 21931 0 0 0
in 4191.47 seconds
Spectrum has 151211 counts for 36.08 counts/sec
-------------------------
MANDATORY KEYWORDS/VALUES
-------------------------
--------------------------------------------------------------------
--------------------------------------------------------------------
EXTNAME - SPECTRUM Name of this BINTABLE
TELESCOP - ASCA Mission/Satellite name
INSTRUME - SIS1 Instrument/Detector
FILTER - Instrument filter in use
EXPOSURE - 4191.5 Integration time (in secs) of PHA data
AREASCAL - 1.0000 Area scaling factor
BACKSCAL - 2.17285E-02 Background scaling factor
BACKFILE - NONE Associated background file
CORRSCAL - 1.0000 Correlation scaling factor
CORRFILE - none Associated correlation file
RESPFILE - NONE Associated redistribution matrix file
ANCRFILE - none Associated ancillary response file
XFLT0001 - none XSPEC selection filter
POISSERR - TRUE Whether Poissonian errors apply
CHANTYPE - PI Whether channels have been corrected
TLMIN1 - 0 First legal Detector channel
DETCHANS - 1024 No. of legal detector channels
NCHAN - 1024 No. of detector channels in dataset
PHAVERSN - 1.1.0 OGIP FITS version number
STAT_ERR - FALSE Statistical Error
SYS_ERR - TRUE Fractional Systematic Error
QUALITY - TRUE Quality Flag
GROUPING - FALSE Grouping Flag
--------------------------------------------------------------------
--------------------------------------------------------------------
... QUALITY
...
... -------
... QUALITY
... -------
... Bad Channels (Channel - Channel)
... ---------------------------------------------
... 0 - 25 have quality 5
... ---------------------------------------------
...
...... exiting, changes written to file : ad12002280s110312_1.pi
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280s100112h.evt
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 4095
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-SIS1-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad12002280s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP3.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_OFFCHIP.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad12002280s110312.discrim
!xsel:ASCA-SIS1-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS1-BRIGHT2 > save spectrum ad12002280s110312_1.pi group=yes
Wrote spectrum to ad12002280s110312_1.pi
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Grouping ad12002280s110312_1.pi to 40 counts/bin------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS1 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 4191.5 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.17285E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 1024 No. of legal detector channels NCHAN - 1024 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 25 of undefined grouping (Channel quality=bad) ... 26 - 40 are grouped by a factor 15 ... 41 - 44 are grouped by a factor 2 ... 45 - 325 are single channels ... 326 - 329 are grouped by a factor 2 ... 330 - 330 are single channels ... 331 - 332 are grouped by a factor 2 ... 333 - 336 are single channels ... 337 - 338 are grouped by a factor 2 ... 339 - 342 are single channels ... 343 - 360 are grouped by a factor 2 ... 361 - 361 are single channels ... 362 - 383 are grouped by a factor 2 ... 384 - 386 are grouped by a factor 3 ... 387 - 388 are grouped by a factor 2 ... 389 - 391 are grouped by a factor 3 ... 392 - 393 are grouped by a factor 2 ... 394 - 399 are grouped by a factor 3 ... 400 - 401 are grouped by a factor 2 ... 402 - 422 are grouped by a factor 3 ... 423 - 426 are grouped by a factor 4 ... 427 - 435 are grouped by a factor 3 ... 436 - 439 are grouped by a factor 4 ... 440 - 441 are grouped by a factor 2 ... 442 - 447 are grouped by a factor 3 ... 448 - 467 are grouped by a factor 2 ... 468 - 473 are grouped by a factor 3 ... 474 - 477 are grouped by a factor 4 ... 478 - 484 are grouped by a factor 7 ... 485 - 504 are grouped by a factor 10 ... 505 - 517 are grouped by a factor 13 ... 518 - 528 are grouped by a factor 11 ... 529 - 544 are grouped by a factor 16 ... 545 - 561 are grouped by a factor 17 ... 562 - 590 are grouped by a factor 29 ... 591 - 630 are grouped by a factor 40 ... 631 - 751 are grouped by a factor 121 ... 752 - 1023 of undefined grouping (Channel quality=bad) ... --------------------------------------------- ... ...... exiting, changes written to file : ad12002280s110312_1.pi ** grppha 2.6.0 completed successfully-> Source occupies chip(s) 0
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x1024 S1C0 Bright2 PI RMF Calibration data from ./ Please stand by... ...Done.-> Generating ad12002280s110312_1.arf with point=no
ASCAARF vers 2.72 14 Mar 1997.
Input WMAP array has size 23 by 32 bins
expanded to 23 by 32 bins
First WMAP bin is at detector pixel 648 384
8 detector pixels per WMAP bin
WMAP bin size is 0.21600 mm
0.21216 arcmin
Selected region size is 25.038 arcmin^2
Optical axis is detector pixel 618.28 773.83
1180 energies from RMF file
Effective area fudge applied
Arf filter applied
Total counts in region = 1.51167E+05
Weighted mean angle from optical axis = 6.689 arcmin
-> Standard Output From STOOL group_event_files:1 ad12002280g200170h.evt 249256 1 ad12002280g200270m.evt 249256 1 ad12002280g200370l.evt 249256-> GIS2_REGION256.4 already present in current directory
ad12002280g200170h.evt ad12002280g200270m.evt ad12002280g200370l.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.45E+04 246034 1024
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.45E+04 246034 1024
2 CAS_A_C2 PH MEDIUM 04/08/95 00:43:01 0.13E+03 1964 1024
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.45E+04 246034 1024
2 CAS_A_C2 PH MEDIUM 04/08/95 00:43:01 0.13E+03 1964 1024
3 CAS_A_C2 PH LOW 04/08/95 01:23:01 0.32E+03 1258 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200170h.evt
Total Good Bad: Region Time Phase Cut
246034 211722 34312 0 0 0
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200270m.evt
Total Good Bad: Region Time Phase Cut
1964 1688 276 0 0 0
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200370l.evt
Total Good Bad: Region Time Phase Cut
1258 1088 170 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
249256 214498 34758 0 0 0
in 4948.01 seconds
Spectrum has 214498 counts for 43.35 counts/sec
-------------------------
MANDATORY KEYWORDS/VALUES
-------------------------
--------------------------------------------------------------------
--------------------------------------------------------------------
EXTNAME - SPECTRUM Name of this BINTABLE
TELESCOP - ASCA Mission/Satellite name
INSTRUME - GIS2 Instrument/Detector
FILTER - Instrument filter in use
EXPOSURE - 4948.0 Integration time (in secs) of PHA data
AREASCAL - 1.0000 Area scaling factor
BACKSCAL - 2.90070E-02 Background scaling factor
BACKFILE - NONE Associated background file
CORRSCAL - 1.0000 Correlation scaling factor
CORRFILE - none Associated correlation file
RESPFILE - NONE Associated redistribution matrix file
ANCRFILE - none Associated ancillary response file
XFLT0001 - none XSPEC selection filter
POISSERR - TRUE Whether Poissonian errors apply
CHANTYPE - PI Whether channels have been corrected
TLMIN1 - 0 First legal Detector channel
DETCHANS - 1024 No. of legal detector channels
NCHAN - 1024 No. of detector channels in dataset
PHAVERSN - 1992a OGIP FITS version number
STAT_ERR - FALSE Statistical Error
SYS_ERR - TRUE Fractional Systematic Error
QUALITY - TRUE Quality Flag
GROUPING - FALSE Grouping Flag
--------------------------------------------------------------------
--------------------------------------------------------------------
...
... --------
... GROUPING
... --------
... ---------------------------------------------
... Channel Grouping (Channel-Channel) :
... ---------------------------------------------
...
...... exiting, changes written to file : ad12002280g210170_1.pi
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280g200170h.evt
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-GIS2-PH > read events ad12002280g200270m.evt
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.50000
Number of files read in: 2
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-GIS2-PH > read events ad12002280g200370l.evt
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 2.0000
Number of files read in: 3
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-GIS2-PH > set phaname PI
!xsel:ASCA-GIS2-PH > filter region ad12002280g225670_1.reg
!xsel:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!xsel:ASCA-GIS2-PH > extract spectrum
!xsel:ASCA-GIS2-PH > save spectrum ad12002280g210170_1.pi group=yes
Wrote spectrum to ad12002280g210170_1.pi
!xsel:ASCA-GIS2-PH > exit save_session=no
-> Correcting ad12002280g210170_1.pi for dead time... read all the files from deadlist.tmp-> Grouping ad12002280g210170_1.pi to 40 counts/bin
------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - GIS2 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 4948.0 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.90070E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 1024 No. of legal detector channels NCHAN - 1024 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - TRUE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 20 are grouped by a factor 21 ... 21 - 415 are single channels ... 416 - 417 are grouped by a factor 2 ... 418 - 428 are single channels ... 429 - 430 are grouped by a factor 2 ... 431 - 433 are single channels ... 434 - 435 are grouped by a factor 2 ... 436 - 436 are single channels ... 437 - 438 are grouped by a factor 2 ... 439 - 441 are single channels ... 442 - 443 are grouped by a factor 2 ... 444 - 444 are single channels ... 445 - 456 are grouped by a factor 2 ... 457 - 457 are single channels ... 458 - 495 are grouped by a factor 2 ... 496 - 498 are grouped by a factor 3 ... 499 - 504 are grouped by a factor 2 ... 505 - 507 are grouped by a factor 3 ... 508 - 535 are grouped by a factor 2 ... 536 - 536 are single channels ... 537 - 542 are grouped by a factor 2 ... 543 - 543 are single channels ... 544 - 545 are grouped by a factor 2 ... 546 - 548 are single channels ... 549 - 554 are grouped by a factor 2 ... 555 - 556 are single channels ... 557 - 564 are grouped by a factor 2 ... 565 - 567 are single channels ... 568 - 583 are grouped by a factor 2 ... 584 - 586 are grouped by a factor 3 ... 587 - 590 are grouped by a factor 2 ... 591 - 594 are grouped by a factor 4 ... 595 - 600 are grouped by a factor 3 ... 601 - 604 are grouped by a factor 4 ... 605 - 607 are grouped by a factor 3 ... 608 - 619 are grouped by a factor 4 ... 620 - 644 are grouped by a factor 5 ... 645 - 650 are grouped by a factor 6 ... 651 - 655 are grouped by a factor 5 ... 656 - 661 are grouped by a factor 6 ... 662 - 669 are grouped by a factor 8 ... 670 - 675 are grouped by a factor 6 ... 676 - 682 are grouped by a factor 7 ... 683 - 690 are grouped by a factor 8 ... 691 - 702 are grouped by a factor 12 ... 703 - 709 are grouped by a factor 7 ... 710 - 720 are grouped by a factor 11 ... 721 - 734 are grouped by a factor 14 ... 735 - 746 are grouped by a factor 12 ... 747 - 759 are grouped by a factor 13 ... 760 - 778 are grouped by a factor 19 ... 779 - 802 are grouped by a factor 24 ... 803 - 828 are grouped by a factor 26 ... 829 - 934 are grouped by a factor 53 ... 935 - 1023 of undefined grouping (Channel quality=bad) ... --------------------------------------------- ... ...... exiting, changes written to file : ad12002280g210170_1.pi ** grppha 2.6.0 completed successfully-> Fetching gis2v4_0.rmf
ASCAARF vers 2.72 14 Mar 1997.
Input WMAP array has size 49 by 49 bins
expanded to 128 by 128 bins
First WMAP bin is at detector pixel 67 58
1 detector pixels per WMAP bin
WMAP bin size is 0.25000 mm
0.24555 arcmin
Selected region size is 114.65 arcmin^2
Optical axis is detector pixel 133.00 130.96
201 energies from RMF file
Effective area fudge applied
Arf filter applied
Total counts in region = 2.14498E+05
Weighted mean angle from optical axis = 3.679 arcmin
-> Standard Output From STOOL group_event_files:1 ad12002280g300170h.evt 224750 1 ad12002280g300270m.evt 224750 1 ad12002280g300370l.evt 224750-> GIS3_REGION256.4 already present in current directory
ad12002280g300170h.evt ad12002280g300270m.evt ad12002280g300370l.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.45E+04 221737 1024
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.45E+04 221737 1024
2 CAS_A_C2 PH MEDIUM 04/08/95 00:43:17 0.11E+03 1748 1024
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.45E+04 221737 1024
2 CAS_A_C2 PH MEDIUM 04/08/95 00:43:17 0.11E+03 1748 1024
3 CAS_A_C2 PH LOW 04/08/95 01:23:01 0.32E+03 1265 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300170h.evt
Total Good Bad: Region Time Phase Cut
221737 191610 30127 0 0 0
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300270m.evt
Total Good Bad: Region Time Phase Cut
1748 1517 231 0 0 0
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300370l.evt
Total Good Bad: Region Time Phase Cut
1265 1110 155 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
224750 194237 30513 0 0 0
in 4932.01 seconds
Spectrum has 194237 counts for 39.38 counts/sec
-------------------------
MANDATORY KEYWORDS/VALUES
-------------------------
--------------------------------------------------------------------
--------------------------------------------------------------------
EXTNAME - SPECTRUM Name of this BINTABLE
TELESCOP - ASCA Mission/Satellite name
INSTRUME - GIS3 Instrument/Detector
FILTER - Instrument filter in use
EXPOSURE - 4932.0 Integration time (in secs) of PHA data
AREASCAL - 1.0000 Area scaling factor
BACKSCAL - 2.90070E-02 Background scaling factor
BACKFILE - NONE Associated background file
CORRSCAL - 1.0000 Correlation scaling factor
CORRFILE - none Associated correlation file
RESPFILE - NONE Associated redistribution matrix file
ANCRFILE - none Associated ancillary response file
XFLT0001 - none XSPEC selection filter
POISSERR - TRUE Whether Poissonian errors apply
CHANTYPE - PI Whether channels have been corrected
TLMIN1 - 0 First legal Detector channel
DETCHANS - 1024 No. of legal detector channels
NCHAN - 1024 No. of detector channels in dataset
PHAVERSN - 1992a OGIP FITS version number
STAT_ERR - FALSE Statistical Error
SYS_ERR - TRUE Fractional Systematic Error
QUALITY - TRUE Quality Flag
GROUPING - FALSE Grouping Flag
--------------------------------------------------------------------
--------------------------------------------------------------------
...
... --------
... GROUPING
... --------
... ---------------------------------------------
... Channel Grouping (Channel-Channel) :
... ---------------------------------------------
...
...... exiting, changes written to file : ad12002280g310170_1.pi
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280g300170h.evt
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-GIS3-PH > read events ad12002280g300270m.evt
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.50000
Number of files read in: 2
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-GIS3-PH > read events ad12002280g300370l.evt
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 2.0000
Number of files read in: 3
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-GIS3-PH > set phaname PI
!xsel:ASCA-GIS3-PH > filter region ad12002280g325670_1.reg
!xsel:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!xsel:ASCA-GIS3-PH > extract spectrum
!xsel:ASCA-GIS3-PH > save spectrum ad12002280g310170_1.pi group=yes
Wrote spectrum to ad12002280g310170_1.pi
!xsel:ASCA-GIS3-PH > exit save_session=no
-> Correcting ad12002280g310170_1.pi for dead time... read all the files from deadlist.tmp-> Grouping ad12002280g310170_1.pi to 40 counts/bin
------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - GIS3 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 4932.0 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.90070E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 1024 No. of legal detector channels NCHAN - 1024 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - TRUE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 20 are grouped by a factor 21 ... 21 - 372 are single channels ... 373 - 374 are grouped by a factor 2 ... 375 - 422 are single channels ... 423 - 424 are grouped by a factor 2 ... 425 - 425 are single channels ... 426 - 427 are grouped by a factor 2 ... 428 - 430 are single channels ... 431 - 432 are grouped by a factor 2 ... 433 - 434 are single channels ... 435 - 436 are grouped by a factor 2 ... 437 - 437 are single channels ... 438 - 445 are grouped by a factor 2 ... 446 - 447 are single channels ... 448 - 453 are grouped by a factor 2 ... 454 - 454 are single channels ... 455 - 484 are grouped by a factor 2 ... 485 - 487 are grouped by a factor 3 ... 488 - 495 are grouped by a factor 2 ... 496 - 498 are grouped by a factor 3 ... 499 - 504 are grouped by a factor 2 ... 505 - 507 are grouped by a factor 3 ... 508 - 515 are grouped by a factor 2 ... 516 - 518 are grouped by a factor 3 ... 519 - 520 are grouped by a factor 2 ... 521 - 523 are grouped by a factor 3 ... 524 - 545 are grouped by a factor 2 ... 546 - 546 are single channels ... 547 - 552 are grouped by a factor 2 ... 553 - 554 are single channels ... 555 - 556 are grouped by a factor 2 ... 557 - 558 are single channels ... 559 - 560 are grouped by a factor 2 ... 561 - 561 are single channels ... 562 - 563 are grouped by a factor 2 ... 564 - 564 are single channels ... 565 - 566 are grouped by a factor 2 ... 567 - 567 are single channels ... 568 - 583 are grouped by a factor 2 ... 584 - 595 are grouped by a factor 3 ... 596 - 603 are grouped by a factor 4 ... 604 - 613 are grouped by a factor 5 ... 614 - 627 are grouped by a factor 7 ... 628 - 632 are grouped by a factor 5 ... 633 - 638 are grouped by a factor 6 ... 639 - 652 are grouped by a factor 7 ... 653 - 660 are grouped by a factor 8 ... 661 - 666 are grouped by a factor 6 ... 667 - 674 are grouped by a factor 8 ... 675 - 679 are grouped by a factor 5 ... 680 - 687 are grouped by a factor 8 ... 688 - 696 are grouped by a factor 9 ... 697 - 708 are grouped by a factor 12 ... 709 - 736 are grouped by a factor 14 ... 737 - 757 are grouped by a factor 21 ... 758 - 789 are grouped by a factor 32 ... 790 - 820 are grouped by a factor 31 ... 821 - 875 are grouped by a factor 55 ... 876 - 1023 of undefined grouping (Channel quality=bad) ... --------------------------------------------- ... ...... exiting, changes written to file : ad12002280g310170_1.pi ** grppha 2.6.0 completed successfully-> Fetching gis3v4_0.rmf
ASCAARF vers 2.72 14 Mar 1997.
Input WMAP array has size 49 by 49 bins
expanded to 128 by 128 bins
First WMAP bin is at detector pixel 73 58
1 detector pixels per WMAP bin
WMAP bin size is 0.25000 mm
0.24555 arcmin
Selected region size is 114.65 arcmin^2
Optical axis is detector pixel 119.36 134.44
201 energies from RMF file
Effective area fudge applied
Arf filter applied
Total counts in region = 1.94237E+05
Weighted mean angle from optical axis = 6.386 arcmin
-> Plotting ad12002280g210170_1_pi.ps from ad12002280g210170_1.pi
XSPEC 9.01 18:27:43 23-Mar-98
Plot device not set, use "cpd" to set it
Type "help" or "?" for further information
!XSPEC> data ad12002280g210170_1.pi
Net count rate (cts/s) for file 1 43.35 +/- 9.3617E-02
1 data set is in use
!XSPEC> setplot energy
!XSPEC> ignore bad
!XSPEC> iplot
!PLT> log y on
!PLT> rescale y
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
XSPEC: quit
-> Plotting ad12002280g310170_1_pi.ps from ad12002280g310170_1.pi
XSPEC 9.01 18:28:15 23-Mar-98
Plot device not set, use "cpd" to set it
Type "help" or "?" for further information
!XSPEC> data ad12002280g310170_1.pi
Net count rate (cts/s) for file 1 39.38 +/- 8.9387E-02
1 data set is in use
!XSPEC> setplot energy
!XSPEC> ignore bad
!XSPEC> iplot
!PLT> log y on
!PLT> rescale y
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
XSPEC: quit
-> Plotting ad12002280s010102_1_pi.ps from ad12002280s010102_1.pi
XSPEC 9.01 18:28:44 23-Mar-98
Plot device not set, use "cpd" to set it
Type "help" or "?" for further information
!XSPEC> data ad12002280s010102_1.pi
Net count rate (cts/s) for file 1 47.27 +/- 0.1054
1 data set is in use
!XSPEC> setplot energy
!XSPEC> ignore bad
!XSPEC> iplot
!PLT> log y on
!PLT> rescale y
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
XSPEC: quit
-> Plotting ad12002280s010202_1_pi.ps from ad12002280s010202_1.pi
XSPEC 9.01 18:29:17 23-Mar-98
Plot device not set, use "cpd" to set it
Type "help" or "?" for further information
!XSPEC> data ad12002280s010202_1.pi
Net count rate (cts/s) for file 1 22.47 +/- 0.3117
1 data set is in use
!XSPEC> setplot energy
!XSPEC> ignore bad
!XSPEC> iplot
!PLT> log y on
!PLT> rescale y
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
XSPEC: quit
-> Plotting ad12002280s010312_1_pi.ps from ad12002280s010312_1.pi
XSPEC 9.01 18:29:48 23-Mar-98
Plot device not set, use "cpd" to set it
Type "help" or "?" for further information
!XSPEC> data ad12002280s010312_1.pi
Net count rate (cts/s) for file 1 47.55 +/- 0.1064
1 data set is in use
!XSPEC> setplot energy
!XSPEC> ignore bad
!XSPEC> iplot
!PLT> log y on
!PLT> rescale y
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
XSPEC: quit
-> Plotting ad12002280s110102_1_pi.ps from ad12002280s110102_1.pi
XSPEC 9.01 18:30:26 23-Mar-98
Plot device not set, use "cpd" to set it
Type "help" or "?" for further information
!XSPEC> data ad12002280s110102_1.pi
Net count rate (cts/s) for file 1 36.05 +/- 9.2520E-02
1 data set is in use
!XSPEC> setplot energy
!XSPEC> ignore bad
!XSPEC> iplot
!PLT> log y on
!PLT> rescale y
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
XSPEC: quit
-> Plotting ad12002280s110202_1_pi.ps from ad12002280s110202_1.pi
XSPEC 9.01 18:31:00 23-Mar-98
Plot device not set, use "cpd" to set it
Type "help" or "?" for further information
!XSPEC> data ad12002280s110202_1.pi
Net count rate (cts/s) for file 1 24.41 +/- 0.3230
1 data set is in use
!XSPEC> setplot energy
!XSPEC> ignore bad
!XSPEC> iplot
!PLT> log y on
!PLT> rescale y
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
XSPEC: quit
-> Plotting ad12002280s110312_1_pi.ps from ad12002280s110312_1.pi
XSPEC 9.01 18:31:32 23-Mar-98
Plot device not set, use "cpd" to set it
Type "help" or "?" for further information
!XSPEC> data ad12002280s110312_1.pi
Net count rate (cts/s) for file 1 36.08 +/- 9.2864E-02
1 data set is in use
!XSPEC> setplot energy
!XSPEC> ignore bad
!XSPEC> iplot
!PLT> log y on
!PLT> rescale y
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
XSPEC: quit
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:46:11 0.42E+04 232263 0010
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:46:11 0.42E+04 232263 0010
2 CAS_A_C2 BRIGHT MEDIUM 04/08/95 00:34:51 0.24E+03 6363 0010
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:46:11 0.42E+04 232263 0010
2 CAS_A_C2 BRIGHT MEDIUM 04/08/95 00:34:51 0.24E+03 6363 0010
3 CAS_A_C2 BRIGHT HIGH 04/08/95 00:45:03 0.46E+02 1984 0010
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s000102h.evt
Total Good Bad: Region Time Phase Cut
232263 202018 30245 0 0 0
Writing events file
202018 events written to the output file
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s000202m.evt
Total Good Bad: Region Time Phase Cut
6363 5538 825 0 0 0
Writing events file
207556 events written to the output file
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s000502h.evt
Total Good Bad: Region Time Phase Cut
1984 1712 272 0 0 0
Writing events file
209268 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
240610 209268 31342 0 0 0
in 4501.13 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280s000102h.evt
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-SIS0-BRIGHT > read events ad12002280s000202m.evt
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 2
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-SIS0-BRIGHT > read events ad12002280s000502h.evt
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 3
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-SIS0-BRIGHT > filter region ad12002280s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
/data/data17/seq_proc/12002280.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no
-> Extracting ad12002280s000002_1.lc with binsize 4.0000000000E+00
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:34:51 0.45E+04 209268 0010
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/events.tmp
Total Good Bad: Region Time Phase Cut
209268 209268 0 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
209268 209268 0 0 0 0
in 4501.13 seconds
Fits light curve has 209268 counts for 46.49 counts/sec
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events events.tmp
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-SIS0-BRIGHT > set binsize 4.0000000000E+00
!xsel:ASCA-SIS0-BRIGHT > extract curve exposure=0.5
!xsel:ASCA-SIS0-BRIGHT > save curve ad12002280s000002_1.lc
Wrote FITS light curve to file ad12002280s000002_1.lc
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no
-> Plotting light curve ad12002280s000002_1_lc.ps
Type "help" for information
[1]xronos> Current User Interface is ; command driven
[2]xronos> Enter up to 50 input filenames and options for series 1 (or rtn)
Ser. A filename 1 +options[.rbf]=> ad12002280s000002_1.lc
Selected FITS extensions: 1 - RATE TABLE;
Source ............ CAS_A_C2O Start Time (d) .... 9933 00:40:53.163
FITS Extension .... 1 - `RATE ` Stop Time (d) ..... 9933 02:59:33.163
No. of Rows ....... 1136 Bin Time (s) ...... 4.000
Right Ascension ... 3.5099E+02 Internal time sys.. Converted to TJD
Declination ....... 5.8821E+01 Experiment ........ ASCA SIS0
Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
Selected Columns: 1 - Time; 2 - Y-axis; 3 - Y-error;
File contains binned data.
Ser. A filename 2 +options[.rbf]=>
Enter up to 50 input filenames and options for series 2 (or rtn)
Ser. B filename 1 +options[.rbf]=>
Enter up to 50 input filenames and options for series 3 (or rtn)
Ser. C filename 1 +options[.rbf]=>
[3]xronos>
Maximum of 1 Intvs. with 512 Newbins of 16.2691 (s)
Intv 1 Start 9933 0:41: 1
Ser.1 Avg 47.02 Chisq 4054. Var 47.75 Newbs. 286
Min 20.62 Max 65.89 expVar 3.186 Bins 1136
Results from Statistical Analysis
Newbin Integration Time (s).. 16.269
Interval Duration (s)........ 8313.5
No. of Newbins .............. 286
Average (c/s) ............... 47.021 +/- 0.11
Standard Deviation (c/s)..... 6.9103
Minimum (c/s)................ 20.625
Maximum (c/s)................ 65.890
Variance ((c/s)**2).......... 47.752 +/- 4.0
Expected Variance ((c/s)**2). 3.1865 +/- 0.27
Third Moment ((c/s)**3)...... -579.70
Average Deviation (c/s)...... 3.4625
Skewness..................... -1.7568 +/- 0.14
Kurtosis..................... 6.6023 +/- 0.29
RMS fractional variation..... 0.14197 +/- 0.64E-02
Chi-Square................... 4054.5 dof 285
Chi-Square Prob of constancy. 0. (0 means < 1.e-38)
Kolm.-Smir. Prob of constancy 0. (0 means < 1.e-38)
[4]xronos> [5]xronos>
Maximum of 1 Intvs. with 512 Newbins of 16.2691 (s)
Intv 1 Start 9933 0:41: 1
Ser.1 Avg 47.02 Chisq 4054. Var 47.75 Newbs. 286
Min 20.62 Max 65.89 expVar 3.186 Bins 1136
Light curve ready !
Frme 1 Written to output file : xronos.qlc1
PLT> PLT> PLT> [6]xronos>
-> Standard Error Output From FTOOL xronosNote: the following IEEE floating-point arithmetic exceptions occurred and were never cleared; see ieee_flags(3M): Inexact; Underflow; Sun's implementation of IEEE arithmetic is discussed in the Numerical Computation Guide.-> TIMEDEL=4.0000000000E+00 for ad12002280s100102h.evt
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:46:11 0.42E+04 172965 1000
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:46:11 0.42E+04 172965 1000
2 CAS_A_C2 BRIGHT MEDIUM 04/08/95 00:34:51 0.24E+03 6807 1000
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:46:11 0.42E+04 172965 1000
2 CAS_A_C2 BRIGHT MEDIUM 04/08/95 00:34:51 0.24E+03 6807 1000
3 CAS_A_C2 BRIGHT HIGH 04/08/95 00:45:31 0.24E+02 1041 1000
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s100102h.evt
Total Good Bad: Region Time Phase Cut
172965 153661 19304 0 0 0
Writing events file
153661 events written to the output file
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s100202m.evt
Total Good Bad: Region Time Phase Cut
6807 6051 756 0 0 0
Writing events file
159712 events written to the output file
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s100502h.evt
Total Good Bad: Region Time Phase Cut
1041 923 118 0 0 0
Writing events file
160635 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
180813 160635 20178 0 0 0
in 4459.16 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280s100102h.evt
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-SIS1-BRIGHT > read events ad12002280s100202m.evt
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 2
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-SIS1-BRIGHT > read events ad12002280s100502h.evt
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 3
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-SIS1-BRIGHT > filter region ad12002280s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
/data/data17/seq_proc/12002280.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no
-> Extracting ad12002280s100002_1.lc with binsize 4.0000000000E+00
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:34:51 0.45E+04 160635 1000
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/events.tmp
Total Good Bad: Region Time Phase Cut
160635 160635 0 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
160635 160635 0 0 0 0
in 4459.16 seconds
Fits light curve has 160635 counts for 36.02 counts/sec
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events events.tmp
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-SIS1-BRIGHT > set binsize 4.0000000000E+00
!xsel:ASCA-SIS1-BRIGHT > extract curve exposure=0.5
!xsel:ASCA-SIS1-BRIGHT > save curve ad12002280s100002_1.lc
Wrote FITS light curve to file ad12002280s100002_1.lc
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no
-> Plotting light curve ad12002280s100002_1_lc.ps
Type "help" for information
[1]xronos> Current User Interface is ; command driven
[2]xronos> Enter up to 50 input filenames and options for series 1 (or rtn)
Ser. A filename 1 +options[.rbf]=> ad12002280s100002_1.lc
Selected FITS extensions: 1 - RATE TABLE;
Source ............ CAS_A_C2O Start Time (d) .... 9933 00:40:53.163
FITS Extension .... 1 - `RATE ` Stop Time (d) ..... 9933 02:59:33.163
No. of Rows ....... 1125 Bin Time (s) ...... 4.000
Right Ascension ... 3.5099E+02 Internal time sys.. Converted to TJD
Declination ....... 5.8821E+01 Experiment ........ ASCA SIS1
Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
Selected Columns: 1 - Time; 2 - Y-axis; 3 - Y-error;
File contains binned data.
Ser. A filename 2 +options[.rbf]=>
Enter up to 50 input filenames and options for series 2 (or rtn)
Ser. B filename 1 +options[.rbf]=>
Enter up to 50 input filenames and options for series 3 (or rtn)
Ser. C filename 1 +options[.rbf]=>
[3]xronos>
Maximum of 1 Intvs. with 512 Newbins of 16.2691 (s)
Intv 1 Start 9933 0:41: 1
Ser.1 Avg 36.43 Chisq 1893. Var 19.05 Newbs. 282
Min 22.19 Max 67.16 expVar 2.443 Bins 1125
Results from Statistical Analysis
Newbin Integration Time (s).. 16.269
Interval Duration (s)........ 8313.5
No. of Newbins .............. 282
Average (c/s) ............... 36.429 +/- 0.93E-01
Standard Deviation (c/s)..... 4.3644
Minimum (c/s)................ 22.188
Maximum (c/s)................ 67.157
Variance ((c/s)**2).......... 19.048 +/- 1.6
Expected Variance ((c/s)**2). 2.4427 +/- 0.21
Third Moment ((c/s)**3)...... 101.70
Average Deviation (c/s)...... 2.3407
Skewness..................... 1.2233 +/- 0.15
Kurtosis..................... 12.095 +/- 0.29
RMS fractional variation..... 0.11186 +/- 0.54E-02
Chi-Square................... 1893.2 dof 281
Chi-Square Prob of constancy. 0. (0 means < 1.e-38)
Kolm.-Smir. Prob of constancy 0.43440E-43 (0 means < 1.e-38)
[4]xronos> [5]xronos>
Maximum of 1 Intvs. with 512 Newbins of 16.2691 (s)
Intv 1 Start 9933 0:41: 1
Ser.1 Avg 36.43 Chisq 1893. Var 19.05 Newbs. 282
Min 22.19 Max 67.16 expVar 2.443 Bins 1125
Light curve ready !
Frme 1 Written to output file : xronos.qlc1
PLT> PLT> PLT> [6]xronos>
-> Standard Error Output From FTOOL xronosNote: the following IEEE floating-point arithmetic exceptions occurred and were never cleared; see ieee_flags(3M): Inexact; Underflow; Sun's implementation of IEEE arithmetic is discussed in the Numerical Computation Guide.-> TIMEDEL=6.2500000000E-02 for ad12002280g200170h.evt
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.45E+04 246034 1024
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.45E+04 246034 1024
2 CAS_A_C2 PH MEDIUM 04/08/95 00:43:01 0.13E+03 1964 1024
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.45E+04 246034 1024
2 CAS_A_C2 PH MEDIUM 04/08/95 00:43:01 0.13E+03 1964 1024
3 CAS_A_C2 PH LOW 04/08/95 01:23:01 0.32E+03 1258 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200170h.evt
Total Good Bad: Region Time Phase Cut
246034 211722 34312 0 0 0
Writing events file
211722 events written to the output file
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200270m.evt
Total Good Bad: Region Time Phase Cut
1964 1688 276 0 0 0
Writing events file
213410 events written to the output file
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200370l.evt
Total Good Bad: Region Time Phase Cut
1258 1088 170 0 0 0
Writing events file
214498 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
249256 214498 34758 0 0 0
in 4948.01 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280g200170h.evt
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-GIS2-PH > read events ad12002280g200270m.evt
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.50000
Number of files read in: 2
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-GIS2-PH > read events ad12002280g200370l.evt
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 2.0000
Number of files read in: 3
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-GIS2-PH > filter region ad12002280g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
/data/data17/seq_proc/12002280.003/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no
-> Extracting ad12002280g200070_1.lc with binsize 2.0000000000E+00
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:43:01 0.49E+04 214498 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/events.tmp
Total Good Bad: Region Time Phase Cut
214498 214498 0 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
214498 214498 0 0 0 0
in 4948.01 seconds
Fits light curve has 214498 counts for 43.35 counts/sec
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events events.tmp
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-GIS2-PH > set binsize 2.0000000000E+00
!xsel:ASCA-GIS2-PH > extract curve exposure=0.5
!xsel:ASCA-GIS2-PH > save curve ad12002280g200070_1.lc
Wrote FITS light curve to file ad12002280g200070_1.lc
!xsel:ASCA-GIS2-PH > exit save_session=no
-> Plotting light curve ad12002280g200070_1_lc.ps
Type "help" for information
[1]xronos> Current User Interface is ; command driven
[2]xronos> Enter up to 50 input filenames and options for series 1 (or rtn)
Ser. A filename 1 +options[.rbf]=> ad12002280g200070_1.lc
Selected FITS extensions: 1 - RATE TABLE;
Source ............ CAS_A_C2O Start Time (d) .... 9933 00:43:01.160
FITS Extension .... 1 - `RATE ` Stop Time (d) ..... 9933 03:04:21.163
No. of Rows ....... 2474 Bin Time (s) ...... 2.000
Right Ascension ... 3.5099E+02 Internal time sys.. Converted to TJD
Declination ....... 5.8821E+01 Experiment ........ ASCA GIS2
Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
Selected Columns: 1 - Time; 2 - Y-axis; 3 - Y-error;
File contains binned data.
Ser. A filename 2 +options[.rbf]=>
Enter up to 50 input filenames and options for series 2 (or rtn)
Ser. B filename 1 +options[.rbf]=>
Enter up to 50 input filenames and options for series 3 (or rtn)
Ser. C filename 1 +options[.rbf]=>
[3]xronos>
Maximum of 1 Intvs. with 512 Newbins of 16.5819 (s)
Intv 1 Start 9933 0:43: 9
Ser.1 Avg 43.40 Chisq 0.1588E+05 Var 137.4 Newbs. 303
Min 2.812 Max 51.18 expVar 2.714 Bins 2474
Results from Statistical Analysis
Newbin Integration Time (s).. 16.582
Interval Duration (s)........ 8473.4
No. of Newbins .............. 303
Average (c/s) ............... 43.397 +/- 0.95E-01
Standard Deviation (c/s)..... 11.722
Minimum (c/s)................ 2.8125
Maximum (c/s)................ 51.176
Variance ((c/s)**2).......... 137.41 +/- 11.
Expected Variance ((c/s)**2). 2.7138 +/- 0.22
Third Moment ((c/s)**3)...... -4611.5
Average Deviation (c/s)...... 6.6096
Skewness..................... -2.8630 +/- 0.14
Kurtosis..................... 6.5764 +/- 0.28
RMS fractional variation..... 0.26743 +/- 0.11E-01
Chi-Square................... 15881. dof 302
Chi-Square Prob of constancy. 0. (0 means < 1.e-38)
Kolm.-Smir. Prob of constancy 0. (0 means < 1.e-38)
[4]xronos> [5]xronos>
Maximum of 1 Intvs. with 512 Newbins of 16.5819 (s)
Intv 1 Start 9933 0:43: 9
Ser.1 Avg 43.40 Chisq 0.1588E+05 Var 137.4 Newbs. 303
Min 2.812 Max 51.18 expVar 2.714 Bins 2474
Light curve ready !
Frme 1 Written to output file : xronos.qlc1
PLT> PLT> PLT> [6]xronos>
-> Standard Error Output From FTOOL xronosNote: the following IEEE floating-point arithmetic exceptions occurred and were never cleared; see ieee_flags(3M): Inexact; Underflow; Sun's implementation of IEEE arithmetic is discussed in the Numerical Computation Guide.-> TIMEDEL=6.2500000000E-02 for ad12002280g300170h.evt
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.45E+04 221737 1024
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.45E+04 221737 1024
2 CAS_A_C2 PH MEDIUM 04/08/95 00:43:17 0.11E+03 1748 1024
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.45E+04 221737 1024
2 CAS_A_C2 PH MEDIUM 04/08/95 00:43:17 0.11E+03 1748 1024
3 CAS_A_C2 PH LOW 04/08/95 01:23:01 0.32E+03 1265 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300170h.evt
Total Good Bad: Region Time Phase Cut
221737 191610 30127 0 0 0
Writing events file
191610 events written to the output file
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300270m.evt
Total Good Bad: Region Time Phase Cut
1748 1517 231 0 0 0
Writing events file
193127 events written to the output file
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300370l.evt
Total Good Bad: Region Time Phase Cut
1265 1110 155 0 0 0
Writing events file
194237 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
224750 194237 30513 0 0 0
in 4932.01 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280g300170h.evt
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-GIS3-PH > read events ad12002280g300270m.evt
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.50000
Number of files read in: 2
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-GIS3-PH > read events ad12002280g300370l.evt
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 2.0000
Number of files read in: 3
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-GIS3-PH > filter region ad12002280g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
/data/data17/seq_proc/12002280.003/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no
-> Extracting ad12002280g300070_1.lc with binsize 2.0000000000E+00
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:43:17 0.49E+04 194237 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/events.tmp
Total Good Bad: Region Time Phase Cut
194237 194237 0 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
194237 194237 0 0 0 0
in 4932.01 seconds
Fits light curve has 194237 counts for 39.38 counts/sec
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events events.tmp
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-GIS3-PH > set binsize 2.0000000000E+00
!xsel:ASCA-GIS3-PH > extract curve exposure=0.5
!xsel:ASCA-GIS3-PH > save curve ad12002280g300070_1.lc
Wrote FITS light curve to file ad12002280g300070_1.lc
!xsel:ASCA-GIS3-PH > exit save_session=no
-> Plotting light curve ad12002280g300070_1_lc.ps
Type "help" for information
[1]xronos> Current User Interface is ; command driven
[2]xronos> Enter up to 50 input filenames and options for series 1 (or rtn)
Ser. A filename 1 +options[.rbf]=> ad12002280g300070_1.lc
Selected FITS extensions: 1 - RATE TABLE;
Source ............ CAS_A_C2O Start Time (d) .... 9933 00:43:17.159
FITS Extension .... 1 - `RATE ` Stop Time (d) ..... 9933 03:04:21.163
No. of Rows ....... 2466 Bin Time (s) ...... 2.000
Right Ascension ... 3.5099E+02 Internal time sys.. Converted to TJD
Declination ....... 5.8821E+01 Experiment ........ ASCA GIS3
Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
Selected Columns: 1 - Time; 2 - Y-axis; 3 - Y-error;
File contains binned data.
Ser. A filename 2 +options[.rbf]=>
Enter up to 50 input filenames and options for series 2 (or rtn)
Ser. B filename 1 +options[.rbf]=>
Enter up to 50 input filenames and options for series 3 (or rtn)
Ser. C filename 1 +options[.rbf]=>
[3]xronos>
Maximum of 1 Intvs. with 512 Newbins of 16.5507 (s)
Intv 1 Start 9933 0:43:25
Ser.1 Avg 39.34 Chisq 0.1370E+05 Var 110.8 Newbs. 303
Min 3.000 Max 46.11 expVar 2.444 Bins 2466
Results from Statistical Analysis
Newbin Integration Time (s).. 16.551
Interval Duration (s)........ 8457.4
No. of Newbins .............. 303
Average (c/s) ............... 39.344 +/- 0.90E-01
Standard Deviation (c/s)..... 10.526
Minimum (c/s)................ 3.0000
Maximum (c/s)................ 46.111
Variance ((c/s)**2).......... 110.79 +/- 9.0
Expected Variance ((c/s)**2). 2.4444 +/- 0.20
Third Moment ((c/s)**3)...... -3367.3
Average Deviation (c/s)...... 5.8921
Skewness..................... -2.8876 +/- 0.14
Kurtosis..................... 6.6953 +/- 0.28
RMS fractional variation..... 0.26456 +/- 0.11E-01
Chi-Square................... 13703. dof 302
Chi-Square Prob of constancy. 0. (0 means < 1.e-38)
Kolm.-Smir. Prob of constancy 0. (0 means < 1.e-38)
[4]xronos> [5]xronos>
Maximum of 1 Intvs. with 512 Newbins of 16.5507 (s)
Intv 1 Start 9933 0:43:25
Ser.1 Avg 39.34 Chisq 0.1370E+05 Var 110.8 Newbs. 303
Min 3.000 Max 46.11 expVar 2.444 Bins 2466
Light curve ready !
Frme 1 Written to output file : xronos.qlc1
PLT> PLT> PLT> [6]xronos>
-> Standard Error Output From FTOOL xronosNote: the following IEEE floating-point arithmetic exceptions occurred and were never cleared; see ieee_flags(3M): Inexact; Underflow; Sun's implementation of IEEE arithmetic is discussed in the Numerical Computation Guide.-> Merging GTIs from the following files:
ad12002280g200170h.evt[2] ad12002280g200270m.evt[2] ad12002280g200370l.evt[2]-> Making L1 light curve of ft950804_0022_0336G2HK.fits with irate=HIGH
ghkcurve: ALLGTI found in input HK file, will be applied to data. ghkcurve: 35969 output records from 35991 good input G2_L1 records.-> Making L1 light curve of ft950804_0022_0336G2HK.fits with irate=HI+MED
ghkcurve: ALLGTI found in input HK file, will be applied to data. ghkcurve: 4607 output records from 36119 good input G2_L1 records.-> Merging GTIs from the following files:
ad12002280g300170h.evt[2] ad12002280g300270m.evt[2] ad12002280g300370l.evt[2]-> Making L1 light curve of ft950804_0022_0336G3HK.fits with irate=HIGH
ghkcurve: ALLGTI found in input HK file, will be applied to data. ghkcurve: 35939 output records from 35961 good input G3_L1 records.-> Making L1 light curve of ft950804_0022_0336G3HK.fits with irate=HI+MED
ghkcurve: ALLGTI found in input HK file, will be applied to data. ghkcurve: 4590 output records from 36073 good input G3_L1 records.
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.45E+04 246034 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200170h.evt
Total Good Bad: Region Time Phase Cut
246034 211722 34312 0 0 0
Writing events file
211722 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
246034 211722 34312 0 0 0
in 4499.96 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280g200170h.evt
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-GIS2-PH > filter region ad12002280g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad12002280g200170h_1.ulc use_events=yes
Wrote events list to file ad12002280g200170h_1.ulc
Changing Data directory from:
/data/data17/seq_proc/12002280.003/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no
-> Extracting unbinned light curve ad12002280g200270m_1.ulc
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH MEDIUM 04/08/95 00:43:01 0.13E+03 1964 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200270m.evt
Total Good Bad: Region Time Phase Cut
1964 1688 276 0 0 0
Writing events file
1688 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1964 1688 276 0 0 0
in 128.03 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280g200270m.evt
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.50000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-GIS2-PH > filter region ad12002280g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad12002280g200270m_1.ulc use_events=yes
Wrote events list to file ad12002280g200270m_1.ulc
Changing Data directory from:
/data/data17/seq_proc/12002280.003/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no
-> Extracting unbinned light curve ad12002280g200370l_1.ulc
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH LOW 04/08/95 01:23:01 0.32E+03 1258 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200370l.evt
Total Good Bad: Region Time Phase Cut
1258 1088 170 0 0 0
Writing events file
1088 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1258 1088 170 0 0 0
in 320.01 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280g200370l.evt
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 2.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-GIS2-PH > filter region ad12002280g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad12002280g200370l_1.ulc use_events=yes
Wrote events list to file ad12002280g200370l_1.ulc
Changing Data directory from:
/data/data17/seq_proc/12002280.003/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no
-> Extracting unbinned light curve ad12002280g300170h_1.ulc
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.45E+04 221737 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300170h.evt
Total Good Bad: Region Time Phase Cut
221737 191610 30127 0 0 0
Writing events file
191610 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
221737 191610 30127 0 0 0
in 4499.96 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280g300170h.evt
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-GIS3-PH > filter region ad12002280g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad12002280g300170h_1.ulc use_events=yes
Wrote events list to file ad12002280g300170h_1.ulc
Changing Data directory from:
/data/data17/seq_proc/12002280.003/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no
-> Extracting unbinned light curve ad12002280g300270m_1.ulc
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH MEDIUM 04/08/95 00:43:17 0.11E+03 1748 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300270m.evt
Total Good Bad: Region Time Phase Cut
1748 1517 231 0 0 0
Writing events file
1517 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1748 1517 231 0 0 0
in 112.03 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280g300270m.evt
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.50000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-GIS3-PH > filter region ad12002280g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad12002280g300270m_1.ulc use_events=yes
Wrote events list to file ad12002280g300270m_1.ulc
Changing Data directory from:
/data/data17/seq_proc/12002280.003/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no
-> Extracting unbinned light curve ad12002280g300370l_1.ulc
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH LOW 04/08/95 01:23:01 0.32E+03 1265 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300370l.evt
Total Good Bad: Region Time Phase Cut
1265 1110 155 0 0 0
Writing events file
1110 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1265 1110 155 0 0 0
in 320.01 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280g300370l.evt
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 2.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-GIS3-PH > filter region ad12002280g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad12002280g300370l_1.ulc use_events=yes
Wrote events list to file ad12002280g300370l_1.ulc
Changing Data directory from:
/data/data17/seq_proc/12002280.003/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no
-> Extracting unbinned light curve ad12002280s000102h_1.ulc
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:46:11 0.42E+04 232263 0010
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s000102h.evt
Total Good Bad: Region Time Phase Cut
232263 202018 30245 0 0 0
Writing events file
202018 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
232263 202018 30245 0 0 0
in 4211.47 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280s000102h.evt
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-SIS0-BRIGHT > filter region ad12002280s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=ad12002280s000102h_1.ulc use_events=yes
Wrote events list to file ad12002280s000102h_1.ulc
Changing Data directory from:
/data/data17/seq_proc/12002280.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no
-> Extracting unbinned light curve ad12002280s000112h_1.ulc
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C2 BRIGHT2 HIGH 04/08/95 00:46:11 0.42E+04 233059 0010
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s000112h.evt
Total Good Bad: Region Time Phase Cut
233059 202713 30346 0 0 0
Writing events file
202713 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
233059 202713 30346 0 0 0
in 4211.47 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280s000112h.evt
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 4095
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad12002280s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT2 > extract events
!xsel:ASCA-SIS0-BRIGHT2 > save events outfile=ad12002280s000112h_1.ulc use_events=yes
Wrote events list to file ad12002280s000112h_1.ulc
Changing Data directory from:
/data/data17/seq_proc/12002280.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Extracting unbinned light curve ad12002280s000202m_1.ulc
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C2 BRIGHT MEDIUM 04/08/95 00:34:51 0.24E+03 6363 0010
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s000202m.evt
Total Good Bad: Region Time Phase Cut
6363 5538 825 0 0 0
Writing events file
5538 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
6363 5538 825 0 0 0
in 243.75 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280s000202m.evt
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-SIS0-BRIGHT > filter region ad12002280s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=ad12002280s000202m_1.ulc use_events=yes
Wrote events list to file ad12002280s000202m_1.ulc
Changing Data directory from:
/data/data17/seq_proc/12002280.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no
-> Extracting unbinned light curve ad12002280s000502h_1.ulc
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:45:03 0.46E+02 1984 0010
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s000502h.evt
Total Good Bad: Region Time Phase Cut
1984 1712 272 0 0 0
Writing events file
1712 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1984 1712 272 0 0 0
in 45.91 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280s000502h.evt
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-SIS0-BRIGHT > filter region ad12002280s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=ad12002280s000502h_1.ulc use_events=yes
Wrote events list to file ad12002280s000502h_1.ulc
Changing Data directory from:
/data/data17/seq_proc/12002280.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no
-> Extracting unbinned light curve ad12002280s100102h_1.ulc
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:46:11 0.42E+04 172965 1000
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s100102h.evt
Total Good Bad: Region Time Phase Cut
172965 153661 19304 0 0 0
Writing events file
153661 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
172965 153661 19304 0 0 0
in 4191.47 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280s100102h.evt
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-SIS1-BRIGHT > filter region ad12002280s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=ad12002280s100102h_1.ulc use_events=yes
Wrote events list to file ad12002280s100102h_1.ulc
Changing Data directory from:
/data/data17/seq_proc/12002280.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no
-> Extracting unbinned light curve ad12002280s100112h_1.ulc
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C2 BRIGHT2 HIGH 04/08/95 00:46:11 0.42E+04 173142 1000
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s100112h.evt
Total Good Bad: Region Time Phase Cut
173142 153813 19329 0 0 0
Writing events file
153813 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
173142 153813 19329 0 0 0
in 4191.47 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280s100112h.evt
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 4095
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad12002280s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > extract events
!xsel:ASCA-SIS1-BRIGHT2 > save events outfile=ad12002280s100112h_1.ulc use_events=yes
Wrote events list to file ad12002280s100112h_1.ulc
Changing Data directory from:
/data/data17/seq_proc/12002280.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Extracting unbinned light curve ad12002280s100202m_1.ulc
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C2 BRIGHT MEDIUM 04/08/95 00:34:51 0.24E+03 6807 1000
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s100202m.evt
Total Good Bad: Region Time Phase Cut
6807 6051 756 0 0 0
Writing events file
6051 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
6807 6051 756 0 0 0
in 243.75 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280s100202m.evt
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-SIS1-BRIGHT > filter region ad12002280s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=ad12002280s100202m_1.ulc use_events=yes
Wrote events list to file ad12002280s100202m_1.ulc
Changing Data directory from:
/data/data17/seq_proc/12002280.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no
-> Extracting unbinned light curve ad12002280s100502h_1.ulc
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:45:31 0.24E+02 1041 1000
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s100502h.evt
Total Good Bad: Region Time Phase Cut
1041 923 118 0 0 0
Writing events file
923 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1041 923 118 0 0 0
in 23.94 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280s100502h.evt
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-SIS1-BRIGHT > filter region ad12002280s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=ad12002280s100502h_1.ulc use_events=yes
Wrote events list to file ad12002280s100502h_1.ulc
Changing Data directory from:
/data/data17/seq_proc/12002280.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no
*** tlmFrm Version 1.1 (1997-08-25) *** total number of superframes: 2830 Total of 0 sets of frame data are extracted.
1 ad12002280g200170h.unf 262294 1 ad12002280g200270m.unf 262294 1 ad12002280g200370l.unf 262294-> Fetching GIS2_CALSRC256.2
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.46E+04 254812 1024
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.46E+04 254812 1024
2 CAS_A_C2 PH MEDIUM 04/08/95 00:43:01 0.20E+04 4172 1024
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.46E+04 254812 1024
2 CAS_A_C2 PH MEDIUM 04/08/95 00:43:01 0.20E+04 4172 1024
3 CAS_A_C2 PH LOW 04/08/95 01:23:01 0.25E+04 3310 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200170h.unf
Total Good Bad: Region Time Phase Cut
254812 1192 253620 0 0 0
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200270m.unf
Total Good Bad: Region Time Phase Cut
4172 439 3733 0 0 0
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200370l.unf
Total Good Bad: Region Time Phase Cut
3310 511 2799 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
262294 2142 260152 0 0 0
in 9101.97 seconds
Spectrum has 2142 counts for 0.2353 counts/sec
-------------------------
MANDATORY KEYWORDS/VALUES
-------------------------
--------------------------------------------------------------------
--------------------------------------------------------------------
EXTNAME - SPECTRUM Name of this BINTABLE
TELESCOP - ASCA Mission/Satellite name
INSTRUME - GIS2 Instrument/Detector
FILTER - Instrument filter in use
EXPOSURE - 9102.0 Integration time (in secs) of PHA data
AREASCAL - 1.0000 Area scaling factor
BACKSCAL - 3.57971E-02 Background scaling factor
BACKFILE - NONE Associated background file
CORRSCAL - 1.0000 Correlation scaling factor
CORRFILE - none Associated correlation file
RESPFILE - NONE Associated redistribution matrix file
ANCRFILE - none Associated ancillary response file
XFLT0001 - none XSPEC selection filter
POISSERR - TRUE Whether Poissonian errors apply
CHANTYPE - PI Whether channels have been corrected
TLMIN1 - 0 First legal Detector channel
DETCHANS - 1024 No. of legal detector channels
NCHAN - 1024 No. of detector channels in dataset
PHAVERSN - 1992a OGIP FITS version number
STAT_ERR - FALSE Statistical Error
SYS_ERR - TRUE Fractional Systematic Error
QUALITY - TRUE Quality Flag
GROUPING - FALSE Grouping Flag
--------------------------------------------------------------------
--------------------------------------------------------------------
...
... --------
... GROUPING
... --------
... ---------------------------------------------
... Channel Grouping (Channel-Channel) :
... ---------------------------------------------
...
...... exiting, changes written to file : ad12002280g220170.cal
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280g200170h.unf
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-GIS2-PH > read events ad12002280g200270m.unf
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.50000
Number of files read in: 2
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-GIS2-PH > read events ad12002280g200370l.unf
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 2.0000
Number of files read in: 3
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-GIS2-PH > filter region GIS2_CALSRC256.2
!xsel:ASCA-GIS2-PH > extract spectrum
!xsel:ASCA-GIS2-PH > save spectrum ad12002280g220170.cal group=yes
Wrote spectrum to ad12002280g220170.cal
!xsel:ASCA-GIS2-PH > exit save_session=no
-> gis2v4_0.rmf already present in current directory
XSPEC 9.01 19:18:06 23-Mar-98
Plot device not set, use "cpd" to set it
Type "help" or "?" for further information
!XSPEC> query yes
Querying disabled - assuming answer is yes
!XSPEC> data ad12002280g220170.cal
Net count rate (cts/s) for file 1 0.2353 +/- 5.1485E-03
1 data set is in use
!XSPEC> ignore bad
!XSPEC> ignore **-4.0
!XSPEC> ignore 8.0-**
!XSPEC> model const/b + gauss/b + gauss/b
Background components must be from the additive model list
mo = constant[1] ) + gaussian/b[2] + gaussian/b[3]
Input parameter value, delta, min, bot, top, and max values for ...
Mod parameter 1 of component 1 constant factor
1.000 1.0000E-02 0. 0. 1.0000E+10 1.0000E+10
!
Mod parameter 2 of component 2 gaussian LineE
6.500 5.0000E-02 0. 0. 1.0000E+06 1.0000E+06
! 5.9
Mod parameter 3 of component 2 gaussian Sigma
0.1000 5.0000E-02 0. 0. 10.00 20.00
! 0.0
Mod parameter 4 of component 2 gaussian norm
1.000 1.0000E-02 0. 0. 1.0000E+24 1.0000E+24
!
Mod parameter 5 of component 3 gaussian LineE
6.500 5.0000E-02 0. 0. 1.0000E+06 1.0000E+06
! 6.5
Mod parameter 6 of component 3 gaussian Sigma
0.1000 5.0000E-02 0. 0. 10.00 20.00
! 0.0
Mod parameter 7 of component 3 gaussian norm
1.000 1.0000E-02 0. 0. 1.0000E+24 1.0000E+24
!
---------------------------------------------------------------------------
---------------------------------------------------------------------------
mo = constant[1] ) + gaussian/b[2] + gaussian/b[3]
Model Fit Model Component Parameter Value
par par comp
1 1 1 constant factor 1.00000 +/- 0.
2 2 2 gaussian/b LineE 5.90000 +/- 0.
3 3 2 gaussian/b Sigma 0. +/- 0.
4 4 2 gaussian/b norm 1.00000 +/- 0.
5 5 3 gaussian/b LineE 6.50000 +/- 0.
6 6 3 gaussian/b Sigma 0. +/- 0.
7 7 3 gaussian/b norm 1.00000 +/- 0.
---------------------------------------------------------------------------
---------------------------------------------------------------------------
7 variable fit parameters
Chi-Squared = 2.8113E+05 using 84 PHA bins.
Reduced chi-squared = 3651.
!XSPEC> newpar 5 = 2 1.101005
6 variable fit parameters
Chi-Squared = 2.7837E+05 using 84 PHA bins.
Reduced chi-squared = 3569.
!XSPEC> newpar 6 = 3 1.049288
5 variable fit parameters
Chi-Squared = 2.7837E+05 using 84 PHA bins.
Reduced chi-squared = 3524.
!XSPEC> renorm
Chi-Squared = 668.4 using 84 PHA bins.
Reduced chi-squared = 8.461
!XSPEC> fit
Chi-Squared Lvl Fit param # 1 2 3 4
5
Due to zero model norms
fit parameter 1 is temporarily frozen
551.94 0 1.000 5.892 7.5140E-02 6.3639E-02
5.4887E-02
Due to zero model norms
fit parameter 1 is temporarily frozen
225.12 0 1.000 5.858 0.1272 9.8888E-02
4.7788E-02
Due to zero model norms
fit parameter 1 is temporarily frozen
120.39 -1 1.000 5.881 0.1488 0.1365
3.5571E-02
Due to zero model norms
fit parameter 1 is temporarily frozen
100.55 -2 1.000 5.921 0.1733 0.1525
2.4914E-02
Due to zero model norms
fit parameter 1 is temporarily frozen
99.308 -3 1.000 5.931 0.1826 0.1564
2.1702E-02
Due to zero model norms
fit parameter 1 is temporarily frozen
99.250 -4 1.000 5.933 0.1857 0.1570
2.1050E-02
Due to zero model norms
fit parameter 1 is temporarily frozen
99.248 -5 1.000 5.934 0.1867 0.1572
2.0863E-02
---------------------------------------------------------------------------
---------------------------------------------------------------------------
mo = constant[1] ) + gaussian/b[2] + gaussian/b[3]
Model Fit Model Component Parameter Value
par par comp
1 1 1 constant factor 1.00000 +/- -1.0000
2 2 2 gaussian/b LineE 5.93358 +/- 0.11957E-01
3 3 2 gaussian/b Sigma 0.186719 +/- 0.13490E-01
4 4 2 gaussian/b norm 0.157218 +/- 0.51710E-02
5 2 3 gaussian/b LineE 6.53290 = par 2 * 1.1010
6 3 3 gaussian/b Sigma 0.195922 = par 3 * 1.0493
7 5 3 gaussian/b norm 2.086270E-02 +/- 0.33549E-02
---------------------------------------------------------------------------
---------------------------------------------------------------------------
Chi-Squared = 99.25 using 84 PHA bins.
Reduced chi-squared = 1.256
!XSPEC> setplot energy
!XSPEC> iplot data
!PLT> label top GIS2 Calibration Source, should peak near 5.9 keV
!PLT> log x off
!PLT> rescale x 4 8
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
XSPEC: quit
-> Calibration source ad12002280g220170.cal peaks at 5.93358 +/- 0.011957 keV1 ad12002280g300170h.unf 236234 1 ad12002280g300270m.unf 236234 1 ad12002280g300370l.unf 236234-> Fetching GIS3_CALSRC256.2
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.46E+04 229264 1024
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.46E+04 229264 1024
2 CAS_A_C2 PH MEDIUM 04/08/95 00:43:17 0.20E+04 3781 1024
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.46E+04 229264 1024
2 CAS_A_C2 PH MEDIUM 04/08/95 00:43:17 0.20E+04 3781 1024
3 CAS_A_C2 PH LOW 04/08/95 01:23:01 0.25E+04 3189 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300170h.unf
Total Good Bad: Region Time Phase Cut
229264 1417 227847 0 0 0
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300270m.unf
Total Good Bad: Region Time Phase Cut
3781 386 3395 0 0 0
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300370l.unf
Total Good Bad: Region Time Phase Cut
3189 414 2775 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
236234 2217 234017 0 0 0
in 9083.97 seconds
Spectrum has 2217 counts for 0.2441 counts/sec
-------------------------
MANDATORY KEYWORDS/VALUES
-------------------------
--------------------------------------------------------------------
--------------------------------------------------------------------
EXTNAME - SPECTRUM Name of this BINTABLE
TELESCOP - ASCA Mission/Satellite name
INSTRUME - GIS3 Instrument/Detector
FILTER - Instrument filter in use
EXPOSURE - 9084.0 Integration time (in secs) of PHA data
AREASCAL - 1.0000 Area scaling factor
BACKSCAL - 2.83356E-02 Background scaling factor
BACKFILE - NONE Associated background file
CORRSCAL - 1.0000 Correlation scaling factor
CORRFILE - none Associated correlation file
RESPFILE - NONE Associated redistribution matrix file
ANCRFILE - none Associated ancillary response file
XFLT0001 - none XSPEC selection filter
POISSERR - TRUE Whether Poissonian errors apply
CHANTYPE - PI Whether channels have been corrected
TLMIN1 - 0 First legal Detector channel
DETCHANS - 1024 No. of legal detector channels
NCHAN - 1024 No. of detector channels in dataset
PHAVERSN - 1992a OGIP FITS version number
STAT_ERR - FALSE Statistical Error
SYS_ERR - TRUE Fractional Systematic Error
QUALITY - TRUE Quality Flag
GROUPING - FALSE Grouping Flag
--------------------------------------------------------------------
--------------------------------------------------------------------
...
... --------
... GROUPING
... --------
... ---------------------------------------------
... Channel Grouping (Channel-Channel) :
... ---------------------------------------------
...
...... exiting, changes written to file : ad12002280g320170.cal
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!xsel:ASCA > read events ad12002280g300170h.unf
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-GIS3-PH > read events ad12002280g300270m.unf
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.50000
Number of files read in: 2
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-GIS3-PH > read events ad12002280g300370l.unf
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 2.0000
Number of files read in: 3
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!xsel:ASCA-GIS3-PH > filter region GIS3_CALSRC256.2
!xsel:ASCA-GIS3-PH > extract spectrum
!xsel:ASCA-GIS3-PH > save spectrum ad12002280g320170.cal group=yes
Wrote spectrum to ad12002280g320170.cal
!xsel:ASCA-GIS3-PH > exit save_session=no
-> gis3v4_0.rmf already present in current directory
XSPEC 9.01 19:20:23 23-Mar-98
Plot device not set, use "cpd" to set it
Type "help" or "?" for further information
!XSPEC> query yes
Querying disabled - assuming answer is yes
!XSPEC> data ad12002280g320170.cal
Net count rate (cts/s) for file 1 0.2441 +/- 5.2541E-03
1 data set is in use
!XSPEC> ignore bad
!XSPEC> ignore **-4.0
!XSPEC> ignore 8.0-**
!XSPEC> model const/b + gauss/b + gauss/b
Background components must be from the additive model list
mo = constant[1] ) + gaussian/b[2] + gaussian/b[3]
Input parameter value, delta, min, bot, top, and max values for ...
Mod parameter 1 of component 1 constant factor
1.000 1.0000E-02 0. 0. 1.0000E+10 1.0000E+10
!
Mod parameter 2 of component 2 gaussian LineE
6.500 5.0000E-02 0. 0. 1.0000E+06 1.0000E+06
! 5.9
Mod parameter 3 of component 2 gaussian Sigma
0.1000 5.0000E-02 0. 0. 10.00 20.00
! 0.0
Mod parameter 4 of component 2 gaussian norm
1.000 1.0000E-02 0. 0. 1.0000E+24 1.0000E+24
!
Mod parameter 5 of component 3 gaussian LineE
6.500 5.0000E-02 0. 0. 1.0000E+06 1.0000E+06
! 6.5
Mod parameter 6 of component 3 gaussian Sigma
0.1000 5.0000E-02 0. 0. 10.00 20.00
! 0.0
Mod parameter 7 of component 3 gaussian norm
1.000 1.0000E-02 0. 0. 1.0000E+24 1.0000E+24
!
---------------------------------------------------------------------------
---------------------------------------------------------------------------
mo = constant[1] ) + gaussian/b[2] + gaussian/b[3]
Model Fit Model Component Parameter Value
par par comp
1 1 1 constant factor 1.00000 +/- 0.
2 2 2 gaussian/b LineE 5.90000 +/- 0.
3 3 2 gaussian/b Sigma 0. +/- 0.
4 4 2 gaussian/b norm 1.00000 +/- 0.
5 5 3 gaussian/b LineE 6.50000 +/- 0.
6 6 3 gaussian/b Sigma 0. +/- 0.
7 7 3 gaussian/b norm 1.00000 +/- 0.
---------------------------------------------------------------------------
---------------------------------------------------------------------------
7 variable fit parameters
Chi-Squared = 3.2168E+05 using 84 PHA bins.
Reduced chi-squared = 4178.
!XSPEC> newpar 5 = 2 1.101005
6 variable fit parameters
Chi-Squared = 3.1805E+05 using 84 PHA bins.
Reduced chi-squared = 4078.
!XSPEC> newpar 6 = 3 1.049288
5 variable fit parameters
Chi-Squared = 3.1805E+05 using 84 PHA bins.
Reduced chi-squared = 4026.
!XSPEC> renorm
Chi-Squared = 668.6 using 84 PHA bins.
Reduced chi-squared = 8.464
!XSPEC> fit
Chi-Squared Lvl Fit param # 1 2 3 4
5
Due to zero model norms
fit parameter 1 is temporarily frozen
539.90 0 1.000 5.866 0.3127 8.8787E-02
4.2128E-02
Due to zero model norms
fit parameter 1 is temporarily frozen
147.98 -1 1.000 5.916 0.1873 0.1248
2.0736E-02
Due to zero model norms
fit parameter 1 is temporarily frozen
110.84 -2 1.000 5.938 0.1579 0.1465
1.7009E-02
Due to zero model norms
fit parameter 1 is temporarily frozen
110.17 -3 1.000 5.932 0.1506 0.1456
1.8364E-02
Due to zero model norms
fit parameter 1 is temporarily frozen
110.05 -4 1.000 5.931 0.1475 0.1451
1.8860E-02
Due to zero model norms
fit parameter 1 is temporarily frozen
110.03 -5 1.000 5.930 0.1463 0.1449
1.9045E-02
Due to zero model norms
fit parameter 1 is temporarily frozen
110.02 -6 1.000 5.930 0.1459 0.1449
1.9117E-02
---------------------------------------------------------------------------
---------------------------------------------------------------------------
mo = constant[1] ) + gaussian/b[2] + gaussian/b[3]
Model Fit Model Component Parameter Value
par par comp
1 1 1 constant factor 1.00000 +/- -1.0000
2 2 2 gaussian/b LineE 5.93013 +/- 0.10025E-01
3 3 2 gaussian/b Sigma 0.145868 +/- 0.13347E-01
4 4 2 gaussian/b norm 0.144878 +/- 0.46030E-02
5 2 3 gaussian/b LineE 6.52910 = par 2 * 1.1010
6 3 3 gaussian/b Sigma 0.153057 = par 3 * 1.0493
7 5 3 gaussian/b norm 1.911679E-02 +/- 0.26214E-02
---------------------------------------------------------------------------
---------------------------------------------------------------------------
Chi-Squared = 110.0 using 84 PHA bins.
Reduced chi-squared = 1.393
!XSPEC> setplot energy
!XSPEC> iplot data
!PLT> label top GIS3 Calibration Source, should peak near 5.9 keV
!PLT> log x off
!PLT> rescale x 4 8
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
XSPEC: quit
-> Calibration source ad12002280g320170.cal peaks at 5.93013 +/- 0.010025 keV
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:46:11 0.51E+04 290010 0010
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s000102h.unf
Total Good Bad: Region Time Phase Cut
290010 0 0 290010 0 0
Writing events file
0 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
290010 0 0 290010 0 0
in 38.04 seconds
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!earthevents:ASCA > read events ad12002280s000102h.unf
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no
-> Deleting ad12002280s000102h.drk since it contains 0 events
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C2 BRIGHT2 HIGH 04/08/95 00:46:11 0.51E+04 290437 0010
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s000112h.unf
Total Good Bad: Region Time Phase Cut
290437 0 0 290437 0 0
Writing events file
0 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
290437 0 0 290437 0 0
in 38.04 seconds
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!earthevents:ASCA > read events ad12002280s000112h.unf
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 4095
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!earthevents:ASCA-SIS0-BRIGHT2 > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS0-BRIGHT2 > extract events
!earthevents:ASCA-SIS0-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Deleting ad12002280s000112h.drk since it contains 0 events
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C2 BRIGHT MEDIUM 04/08/95 00:34:51 0.61E+03 15128 0010
EXTRACTOR vers 2.0 11 Apr 1997.
Skipping file: /data/data17/seq_proc/12002280.003/ad12002280s000202m.unf
Writing events file
0 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
0 0 0 0 0 0
in 0.00 seconds
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!earthevents:ASCA > read events ad12002280s000202m.unf
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no
-> Deleting ad12002280s000202m.drk since it contains 0 events
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:45:03 0.46E+02 2035 0010
EXTRACTOR vers 2.0 11 Apr 1997.
Skipping file: /data/data17/seq_proc/12002280.003/ad12002280s000502h.unf
Writing events file
0 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
0 0 0 0 0 0
in 0.00 seconds
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!earthevents:ASCA > read events ad12002280s000502h.unf
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no
-> Deleting ad12002280s000502h.drk since it contains 0 events
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:46:11 0.51E+04 217775 1000
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s100102h.unf
Total Good Bad: Region Time Phase Cut
217775 6 0 217769 0 0
Writing events file
6 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
217775 6 0 217769 0 0
in 38.04 seconds
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!earthevents:ASCA > read events ad12002280s100102h.unf
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no
-> Cleaning hot pixels from ad12002280s100102h.unf
CLEANSIS_V1.6
allocating image arrays...
PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
* Anomalous pixels may consist of at least two populations.
1. Persistent HOT pixels are removed by comparing to the chip mean.
2. Flickering WARM pixels are removed by comparing to the cell mean.
3. In faint areas (zero bgd), flickering pixels are removed with a
cutoff threshold.
Hints:
Choose cell size and thresholds based on the expected background and the PSF.
Use the DIRTYSIS option to examine the anomalous pixel spectra.
Try a multiple pass clean:
Choose a PHA cut to optimize the S/N of the flickering pixels,
then a broad band clean.
Be suspicious of extended source cleans.
For very bright sources you may need to turn off the iteration option.
See the help page for further info (fhelp cleansis)
Poisson clean cell size : 5
Poisson probability threshold : 0.575E-05
Zero Bgd Cutoff threshold (>) : 3
Iterate : F
Dirtysis : F
Minimum PHA value (inclusive) : 0
Maximum PHA value (inclusive) : 4095
open output file: ad12002280s100102h.drk
reading data file: event.tmp
copying primary header to output file...
making chip image...
Total counts in chip images : 6
copy bad pix array...
cleaning chip # 0
Hot pixels & counts : 0 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
Number of pixels rejected : 0
Number of (internal) image counts : 6
Number of image cts rejected (N, %) : 0 0.0000000
By chip : 0 1 2 3
Pixels rejected : 0 0 0 0
Image counts : 6 0 0 0
Image cts rejected: 0 0 0 0
Image cts rej (%) : 0.00 0.00 0.00 0.00
filtering data...
Total counts : 6 0 0 0
Total cts rejected: 0 0 0 0
Total cts rej (%) : 0.00 0.00 0.00 0.00
Number of clean counts accepted : 6
writing history cards...
copying extensions...
writing out hot pixs...
Number of rejected pixels : 0
updating NEVENTS keywords...
closing data file...
closing clean file...
-> Extracting bright and dark Earth events from ad12002280s100112h.unf
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C2 BRIGHT2 HIGH 04/08/95 00:46:11 0.51E+04 217857 1000
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s100112h.unf
Total Good Bad: Region Time Phase Cut
217857 6 0 217851 0 0
Writing events file
6 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
217857 6 0 217851 0 0
in 38.04 seconds
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!earthevents:ASCA > read events ad12002280s100112h.unf
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 4095
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS1-BRIGHT2 > extract events
!earthevents:ASCA-SIS1-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Cleaning hot pixels from ad12002280s100112h.unf
CLEANSIS_V1.6
allocating image arrays...
PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
* Anomalous pixels may consist of at least two populations.
1. Persistent HOT pixels are removed by comparing to the chip mean.
2. Flickering WARM pixels are removed by comparing to the cell mean.
3. In faint areas (zero bgd), flickering pixels are removed with a
cutoff threshold.
Hints:
Choose cell size and thresholds based on the expected background and the PSF.
Use the DIRTYSIS option to examine the anomalous pixel spectra.
Try a multiple pass clean:
Choose a PHA cut to optimize the S/N of the flickering pixels,
then a broad band clean.
Be suspicious of extended source cleans.
For very bright sources you may need to turn off the iteration option.
See the help page for further info (fhelp cleansis)
Poisson clean cell size : 5
Poisson probability threshold : 0.575E-05
Zero Bgd Cutoff threshold (>) : 3
Iterate : F
Dirtysis : F
Minimum PHA value (inclusive) : 0
Maximum PHA value (inclusive) : 4095
open output file: ad12002280s100112h.drk
reading data file: event.tmp
copying primary header to output file...
making chip image...
Total counts in chip images : 6
copy bad pix array...
cleaning chip # 0
Hot pixels & counts : 0 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
Number of pixels rejected : 0
Number of (internal) image counts : 6
Number of image cts rejected (N, %) : 0 0.0000000
By chip : 0 1 2 3
Pixels rejected : 0 0 0 0
Image counts : 6 0 0 0
Image cts rejected: 0 0 0 0
Image cts rej (%) : 0.00 0.00 0.00 0.00
filtering data...
Total counts : 6 0 0 0
Total cts rejected: 0 0 0 0
Total cts rej (%) : 0.00 0.00 0.00 0.00
Number of clean counts accepted : 6
writing history cards...
copying extensions...
writing out hot pixs...
Number of rejected pixels : 0
updating NEVENTS keywords...
closing data file...
closing clean file...
-> Extracting bright and dark Earth events from ad12002280s100202m.unf
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C2 BRIGHT MEDIUM 04/08/95 00:34:51 0.61E+03 16493 1000
EXTRACTOR vers 2.0 11 Apr 1997.
Skipping file: /data/data17/seq_proc/12002280.003/ad12002280s100202m.unf
Writing events file
0 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
0 0 0 0 0 0
in 0.00 seconds
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!earthevents:ASCA > read events ad12002280s100202m.unf
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no
-> Deleting ad12002280s100202m.drk since it contains 0 events
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C2 BRIGHT LOW 04/08/95 01:22:55 0.26E+04 1099 1000
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s100402l.unf
Total Good Bad: Region Time Phase Cut
1099 74 0 1025 0 0
Writing events file
74 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1099 74 0 1025 0 0
in 576.00 seconds
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!earthevents:ASCA > read events ad12002280s100402l.unf
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no
-> Cleaning hot pixels from ad12002280s100402l.unf
CLEANSIS_V1.6
allocating image arrays...
PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
* Anomalous pixels may consist of at least two populations.
1. Persistent HOT pixels are removed by comparing to the chip mean.
2. Flickering WARM pixels are removed by comparing to the cell mean.
3. In faint areas (zero bgd), flickering pixels are removed with a
cutoff threshold.
Hints:
Choose cell size and thresholds based on the expected background and the PSF.
Use the DIRTYSIS option to examine the anomalous pixel spectra.
Try a multiple pass clean:
Choose a PHA cut to optimize the S/N of the flickering pixels,
then a broad band clean.
Be suspicious of extended source cleans.
For very bright sources you may need to turn off the iteration option.
See the help page for further info (fhelp cleansis)
Poisson clean cell size : 5
Poisson probability threshold : 0.575E-05
Zero Bgd Cutoff threshold (>) : 3
Iterate : F
Dirtysis : F
Minimum PHA value (inclusive) : 0
Maximum PHA value (inclusive) : 4095
open output file: ad12002280s100402l.drk
reading data file: event.tmp
copying primary header to output file...
making chip image...
Total counts in chip images : 74
copy bad pix array...
cleaning chip # 0
Hot pixels & counts : 2 61
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
Number of pixels rejected : 2
Number of (internal) image counts : 74
Number of image cts rejected (N, %) : 61 82.4324341
By chip : 0 1 2 3
Pixels rejected : 2 0 0 0
Image counts : 74 0 0 0
Image cts rejected: 61 0 0 0
Image cts rej (%) : 82.43 0.00 0.00 0.00
filtering data...
Total counts : 74 0 0 0
Total cts rejected: 61 0 0 0
Total cts rej (%) : 82.43 0.00 0.00 0.00
Number of clean counts accepted : 13
writing history cards...
copying extensions...
writing out hot pixs...
Number of rejected pixels : 2
updating NEVENTS keywords...
closing data file...
closing clean file...
-> Extracting bright and dark Earth events from ad12002280s100412l.unf
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C2 BRIGHT2 LOW 04/08/95 01:22:55 0.26E+04 1103 1000
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280s100412l.unf
Total Good Bad: Region Time Phase Cut
1103 75 0 1028 0 0
Writing events file
75 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1103 75 0 1028 0 0
in 576.00 seconds
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!earthevents:ASCA > read events ad12002280s100412l.unf
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 4095
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS1-BRIGHT2 > extract events
!earthevents:ASCA-SIS1-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Cleaning hot pixels from ad12002280s100412l.unf
CLEANSIS_V1.6
allocating image arrays...
PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
* Anomalous pixels may consist of at least two populations.
1. Persistent HOT pixels are removed by comparing to the chip mean.
2. Flickering WARM pixels are removed by comparing to the cell mean.
3. In faint areas (zero bgd), flickering pixels are removed with a
cutoff threshold.
Hints:
Choose cell size and thresholds based on the expected background and the PSF.
Use the DIRTYSIS option to examine the anomalous pixel spectra.
Try a multiple pass clean:
Choose a PHA cut to optimize the S/N of the flickering pixels,
then a broad band clean.
Be suspicious of extended source cleans.
For very bright sources you may need to turn off the iteration option.
See the help page for further info (fhelp cleansis)
Poisson clean cell size : 5
Poisson probability threshold : 0.575E-05
Zero Bgd Cutoff threshold (>) : 3
Iterate : F
Dirtysis : F
Minimum PHA value (inclusive) : 0
Maximum PHA value (inclusive) : 4095
open output file: ad12002280s100412l.drk
reading data file: event.tmp
copying primary header to output file...
making chip image...
Total counts in chip images : 75
copy bad pix array...
cleaning chip # 0
Hot pixels & counts : 2 61
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
Number of pixels rejected : 2
Number of (internal) image counts : 75
Number of image cts rejected (N, %) : 61 81.3333359
By chip : 0 1 2 3
Pixels rejected : 2 0 0 0
Image counts : 75 0 0 0
Image cts rejected: 61 0 0 0
Image cts rej (%) : 81.33 0.00 0.00 0.00
filtering data...
Total counts : 75 0 0 0
Total cts rejected: 61 0 0 0
Total cts rej (%) : 81.33 0.00 0.00 0.00
Number of clean counts accepted : 14
writing history cards...
copying extensions...
writing out hot pixs...
Number of rejected pixels : 2
updating NEVENTS keywords...
closing data file...
closing clean file...
-> Extracting bright and dark Earth events from ad12002280s100502h.unf
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C2 BRIGHT HIGH 04/08/95 00:45:31 0.24E+02 1080 1000
EXTRACTOR vers 2.0 11 Apr 1997.
Skipping file: /data/data17/seq_proc/12002280.003/ad12002280s100502h.unf
Writing events file
0 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
0 0 0 0 0 0
in 0.00 seconds
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!earthevents:ASCA > read events ad12002280s100502h.unf
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no
-> Deleting ad12002280s100502h.drk since it contains 0 events
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.46E+04 254812 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200170h.unf
Total Good Bad: Region Time Phase Cut
254812 15 0 254797 0 0
Writing events file
15 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
254812 15 0 254797 0 0
in 32.04 seconds
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!earthevents:ASCA > read events ad12002280g200170h.unf
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no
-> Extracting ad12002280g200170h.brt
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.46E+04 254812 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Skipping file: /data/data17/seq_proc/12002280.003/ad12002280g200170h.unf
Writing events file
0 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
0 0 0 0 0 0
in 0.00 seconds
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!earthevents:ASCA > read events ad12002280g200170h.unf
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no
-> Deleting ad12002280g200170h.brt since it contains 0 events
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH MEDIUM 04/08/95 00:43:01 0.20E+04 4172 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200270m.unf
Total Good Bad: Region Time Phase Cut
4172 253 0 3919 0 0
Writing events file
253 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
4172 253 0 3919 0 0
in 351.96 seconds
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!earthevents:ASCA > read events ad12002280g200270m.unf
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.50000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no
-> Extracting ad12002280g200270m.brt
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH MEDIUM 04/08/95 00:43:01 0.20E+04 4172 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200270m.unf
Total Good Bad: Region Time Phase Cut
4172 1174 0 2998 0 0
Writing events file
1174 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
4172 1174 0 2998 0 0
in 1408.00 seconds
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!earthevents:ASCA > read events ad12002280g200270m.unf
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.50000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no
-> Extracting bright and dark Earth events from ad12002280g200370l.unf
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH LOW 04/08/95 01:23:01 0.25E+04 3310 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200370l.unf
Total Good Bad: Region Time Phase Cut
3310 363 0 2947 0 0
Writing events file
363 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
3310 363 0 2947 0 0
in 576.00 seconds
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!earthevents:ASCA > read events ad12002280g200370l.unf
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 2.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no
-> Extracting ad12002280g200370l.brt
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH LOW 04/08/95 01:23:01 0.25E+04 3310 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g200370l.unf
Total Good Bad: Region Time Phase Cut
3310 1245 0 2065 0 0
Writing events file
1245 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
3310 1245 0 2065 0 0
in 1440.00 seconds
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!earthevents:ASCA > read events ad12002280g200370l.unf
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 2.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no
-> Extracting bright and dark Earth events from ad12002280g300170h.unf
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.46E+04 229264 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300170h.unf
Total Good Bad: Region Time Phase Cut
229264 19 0 229245 0 0
Writing events file
19 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
229264 19 0 229245 0 0
in 32.04 seconds
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!earthevents:ASCA > read events ad12002280g300170h.unf
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no
-> Extracting ad12002280g300170h.brt
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH HIGH 04/08/95 00:45:09 0.46E+04 229264 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Skipping file: /data/data17/seq_proc/12002280.003/ad12002280g300170h.unf
Writing events file
0 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
0 0 0 0 0 0
in 0.00 seconds
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!earthevents:ASCA > read events ad12002280g300170h.unf
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no
-> Deleting ad12002280g300170h.brt since it contains 0 events
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH MEDIUM 04/08/95 00:43:17 0.20E+04 3781 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300270m.unf
Total Good Bad: Region Time Phase Cut
3781 211 0 3570 0 0
Writing events file
211 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
3781 211 0 3570 0 0
in 351.96 seconds
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!earthevents:ASCA > read events ad12002280g300270m.unf
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.50000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no
-> Extracting ad12002280g300270m.brt
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH MEDIUM 04/08/95 00:43:17 0.20E+04 3781 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300270m.unf
Total Good Bad: Region Time Phase Cut
3781 1081 0 2700 0 0
Writing events file
1081 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
3781 1081 0 2700 0 0
in 1408.00 seconds
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!earthevents:ASCA > read events ad12002280g300270m.unf
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.50000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no
-> Extracting bright and dark Earth events from ad12002280g300370l.unf
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH LOW 04/08/95 01:23:01 0.25E+04 3189 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300370l.unf
Total Good Bad: Region Time Phase Cut
3189 330 0 2859 0 0
Writing events file
330 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
3189 330 0 2859 0 0
in 576.00 seconds
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!earthevents:ASCA > read events ad12002280g300370l.unf
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 2.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no
-> Extracting ad12002280g300370l.brt
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C2 PH LOW 04/08/95 01:23:01 0.25E+04 3189 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data17/seq_proc/12002280.003/ad12002280g300370l.unf
Total Good Bad: Region Time Phase Cut
3189 1185 0 2004 0 0
Writing events file
1185 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
3189 1185 0 2004 0 0
in 1440.00 seconds
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data17/seq_proc/12002280.003/
Setting mkf directory to /data/data17/seq_proc/12002280.003/
!earthevents:ASCA > read events ad12002280g300370l.unf
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 2.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data17/seq_proc/12002280.003/
HK Directory is: /data/data17/seq_proc/12002280.003/
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no
Offset of 1.500000000000000E+08 from 1/1/93 0:0:0 is date and time (including leapseconds) = 3/10/97 2:39:56.000000 Modified Julian Day = 50724.111064814816928
ad12002280s000102h.unf|S0_GRADE|01111111|grade discrimination level ad12002280s000502h.unf|S0_GRADE|00000011|S0 grade discrimination level ad12002280s000102h.unf|ORIGMODE|FAINT|DATAMODE before any conversion ad12002280s000502h.unf|ORIGMODE|BRIGHT|DATAMODE before any conversion-> listing ad12002280s000102h.unf
ad12002280s100102h.unf|ORIGMODE|FAINT|DATAMODE before any conversion ad12002280s100502h.unf|ORIGMODE|BRIGHT|DATAMODE before any conversion-> listing ad12002280s100102h.unf
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Doing inventory of all files