! Started logfile: J0336+3218_S_2006_02_23_yyk_uvs.log on Wed Jul  5 11:13:43 2006
obs J0336+3218_S_2006_02_23_yyk_uva.fits
! Reading UV FITS file: J0336+3218_S_2006_02_23_yyk_uva.fits
! AN table 1: 232 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.799904 visibilities/baseline/integration-bin.
! Found source: J0336+3218
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2423 lines of history.
! 
! Reading 33404 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0336+3218_S_2006_02_23_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 1.68303 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.779 mas, bmaj=8.337 mas, bpa=-24.76 degrees
! Estimated noise=1.89167 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.5, 0.5).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.35608 Jy
! Component: 100  -  total flux cleaned = 1.85723 Jy
! Total flux subtracted in 100 components = 1.85723 Jy
! Clean residual min=-0.078801 max=0.181129 Jy/beam
! Clean residual mean=-0.000218 rms=0.033016 Jy/beam
! Combined flux in latest and established models = 1.85723 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 1.85723 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.441067Jy  sigma=8.066752
! Fit after  self-cal, rms=0.437956Jy  sigma=8.003946
! Inverting map and beam 
! Estimated beam: bmin=2.779 mas, bmaj=8.337 mas, bpa=-24.76 degrees
! Estimated noise=1.89167 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.146 mas, bmaj=9.232 mas, bpa=-23.65 degrees
! Estimated noise=1.36024 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.2696 Jy
! Component: 100  -  total flux cleaned = 0.400012 Jy
! Component: 150  -  total flux cleaned = 0.470075 Jy
! Component: 200  -  total flux cleaned = 0.498004 Jy
! Total flux subtracted in 200 components = 0.498004 Jy
! Clean residual min=-0.051720 max=0.097107 Jy/beam
! Clean residual mean=-0.000497 rms=0.016076 Jy/beam
! Combined flux in latest and established models = 2.35524 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 40 model components to the UV plane model.
! The established model now contains 54 components and 2.35524 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.281060Jy  sigma=5.030179
! Fit after  self-cal, rms=0.280029Jy  sigma=5.003465
! Inverting map 
! Added new window around map position (6.5, -7.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0806165 Jy
! Component: 100  -  total flux cleaned = 0.091966 Jy
! Component: 150  -  total flux cleaned = 0.0989904 Jy
! Component: 200  -  total flux cleaned = 0.100125 Jy
! Total flux subtracted in 200 components = 0.100125 Jy
! Clean residual min=-0.041415 max=0.037362 Jy/beam
! Clean residual mean=-0.000455 rms=0.010709 Jy/beam
! Combined flux in latest and established models = 2.45536 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 86 components and 2.45536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.247922Jy  sigma=4.391495
! Fit after  self-cal, rms=0.244410Jy  sigma=4.345706
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.146 x 9.232 at -23.65 degrees (North through East)
! Clean map  min=-0.037905  max=1.3297 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00511
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.94     HN        0.98     KP        0.94     
!   LA        1.19     MK        0.89     NL        0.93     OV        0.98     
!   PT        1.03     SC        1.08     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.990523
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.01     KP        0.97     
!   LA        1.16     MK        0.96     NL        0.96     OV        1.01     
!   PT        0.98     SC        1.07     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.927853
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.47     FD        1.01     HN        1.03     KP        0.97     
!   LA        0.94     MK        1.08     NL        1.05     OV        1.05     
!   PT        1.08     SC        1.10     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.02218
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.96     KP        0.90     
!   LA        0.80     MK        1.04     NL        0.99     OV        0.89     
!   PT        0.94     SC        1.22     
! 
! 
! Fit before self-cal, rms=0.244410Jy  sigma=4.345706
! Fit after  self-cal, rms=0.166886Jy  sigma=3.298893
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.166886Jy  sigma=3.298893
! Fit after  self-cal, rms=0.166804Jy  sigma=3.297440
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.184 mas, bmaj=9.631 mas, bpa=-24.81 degrees
! Estimated noise=1.33643 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.0492157 Jy
! Component: 100  -  total flux cleaned = -0.0494758 Jy
! Component: 150  -  total flux cleaned = -0.0494793 Jy
! Component: 200  -  total flux cleaned = -0.0512508 Jy
! Total flux subtracted in 200 components = -0.0512508 Jy
! Clean residual min=-0.015869 max=0.014668 Jy/beam
! Clean residual mean=0.000104 rms=0.004237 Jy/beam
! Combined flux in latest and established models = 2.40411 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 46 model components to the UV plane model.
! The established model now contains 115 components and 2.40411 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.155219Jy  sigma=2.954513
! Fit after  self-cal, rms=0.154840Jy  sigma=2.949946
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154840Jy  sigma=2.949946
! Fit after  self-cal, rms=0.137406Jy  sigma=2.747034
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00182911 Jy
! Component: 100  -  total flux cleaned = 0.00359371 Jy
! Component: 150  -  total flux cleaned = 0.00357834 Jy
! Component: 200  -  total flux cleaned = 0.00291913 Jy
! Total flux subtracted in 200 components = 0.00291913 Jy
! Clean residual min=-0.013719 max=0.012643 Jy/beam
! Clean residual mean=0.000104 rms=0.003668 Jy/beam
! Combined flux in latest and established models = 2.40703 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 141 components and 2.40703 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135931Jy  sigma=2.713171
! Fit after  self-cal, rms=0.134833Jy  sigma=2.702627
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.184 x 9.631 at -24.81 degrees (North through East)
! Clean map  min=-0.017351  max=1.3417 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134833Jy  sigma=2.702627
! Fit after  self-cal, rms=0.070726Jy  sigma=1.165707
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070726Jy  sigma=1.165707
! Fit after  self-cal, rms=0.070591Jy  sigma=1.164844
! Inverting map and beam 
! Estimated beam: bmin=3.192 mas, bmaj=9.607 mas, bpa=-24.72 degrees
! Estimated noise=1.33263 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00954293 Jy
! Component: 100  -  total flux cleaned = 0.008726 Jy
! Component: 150  -  total flux cleaned = 0.00822133 Jy
! Component: 200  -  total flux cleaned = 0.00821228 Jy
! Total flux subtracted in 200 components = 0.00821228 Jy
! Clean residual min=-0.011502 max=0.009468 Jy/beam
! Clean residual mean=0.000031 rms=0.002897 Jy/beam
! Combined flux in latest and established models = 2.41524 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 150 components and 2.41524 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068510Jy  sigma=1.121904
! Fit after  self-cal, rms=0.068250Jy  sigma=1.117416
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068250Jy  sigma=1.117416
! Fit after  self-cal, rms=0.067041Jy  sigma=1.095073
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067041Jy  sigma=1.095073
! Fit after  self-cal, rms=0.067040Jy  sigma=1.095068
! Inverting map and beam 
! Estimated beam: bmin=3.198 mas, bmaj=9.611 mas, bpa=-24.73 degrees
! Estimated noise=1.33348 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00444854 Jy
! Component: 100  -  total flux cleaned = 0.004018 Jy
! Component: 150  -  total flux cleaned = 0.00382269 Jy
! Component: 200  -  total flux cleaned = 0.00382552 Jy
! Total flux subtracted in 200 components = 0.00382552 Jy
! Clean residual min=-0.010202 max=0.008546 Jy/beam
! Clean residual mean=0.000029 rms=0.002632 Jy/beam
! Combined flux in latest and established models = 2.41907 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 157 components and 2.41907 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065794Jy  sigma=1.068694
! Fit after  self-cal, rms=0.065648Jy  sigma=1.065996
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.076 mas, bmaj=10.86 mas, bpa=-21.98 degrees
! Estimated noise=1.67241 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00152731 Jy
! Component: 100  -  total flux cleaned = -0.00152643 Jy
! Component: 150  -  total flux cleaned = -0.00175375 Jy
! Component: 200  -  total flux cleaned = -0.00197014 Jy
! Total flux subtracted in 200 components = -0.00197014 Jy
! Clean residual min=-0.011221 max=0.012930 Jy/beam
! Clean residual mean=0.000049 rms=0.003813 Jy/beam
! Combined flux in latest and established models = 2.4171 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 24 model components to the UV plane model.
! The established model now contains 178 components and 2.4171 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065353Jy  sigma=1.059972
! Fit after  self-cal, rms=0.065285Jy  sigma=1.058912
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.785 mas, bmaj=8.567 mas, bpa=-25.07 degrees
! Estimated noise=1.80301 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.31715 Jy
! Component: 100  -  total flux cleaned = 1.80051 Jy
! Component: 150  -  total flux cleaned = 2.01288 Jy
! Component: 200  -  total flux cleaned = 2.12662 Jy
! Total flux subtracted in 200 components = 2.12662 Jy
! Clean residual min=-0.030719 max=0.045227 Jy/beam
! Clean residual mean=-0.000024 rms=0.010910 Jy/beam
! Combined flux in latest and established models = 2.12662 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 43 model components to the UV plane model.
! The established model now contains 43 components and 2.12662 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.198 mas, bmaj=9.611 mas, bpa=-24.73 degrees
! Estimated noise=1.33348 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.106687 Jy
! Component: 100  -  total flux cleaned = 0.169397 Jy
! Component: 150  -  total flux cleaned = 0.210367 Jy
! Component: 200  -  total flux cleaned = 0.238071 Jy
! Total flux subtracted in 200 components = 0.238071 Jy
! Clean residual min=-0.014030 max=0.015354 Jy/beam
! Clean residual mean=0.000010 rms=0.004476 Jy/beam
! Combined flux in latest and established models = 2.36469 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 98 components and 2.36469 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.076 mas, bmaj=10.86 mas, bpa=-21.98 degrees
! Estimated noise=1.67241 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0286563 Jy
! Component: 100  -  total flux cleaned = 0.0412068 Jy
! Component: 150  -  total flux cleaned = 0.0456087 Jy
! Component: 200  -  total flux cleaned = 0.0466359 Jy
! Total flux subtracted in 200 components = 0.0466359 Jy
! Clean residual min=-0.011495 max=0.014461 Jy/beam
! Clean residual mean=0.000045 rms=0.003990 Jy/beam
! Combined flux in latest and established models = 2.41133 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 141 components and 2.41133 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.198 mas, bmaj=9.611 mas, bpa=-24.73 degrees
! Estimated noise=1.33348 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00283403 Jy
! Component: 100  -  total flux cleaned = 0.00326805 Jy
! Component: 150  -  total flux cleaned = 0.0029426 Jy
! Component: 200  -  total flux cleaned = 0.00265208 Jy
! Total flux subtracted in 200 components = 0.00265208 Jy
! Clean residual min=-0.009875 max=0.010966 Jy/beam
! Clean residual mean=0.000024 rms=0.002775 Jy/beam
! Combined flux in latest and established models = 2.41398 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 32 model components to the UV plane model.
! The established model now contains 170 components and 2.41398 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067114Jy  sigma=1.085561
! Fit after  self-cal, rms=0.065474Jy  sigma=1.065644
wmodel J0336+3218_S_2006_02_23_yyk\_map.mod
! Writing 170 model components to file: J0336+3218_S_2006_02_23_yyk_map.mod
wobs J0336+3218_S_2006_02_23_yyk\_uvs.fits
! Writing UV FITS file: J0336+3218_S_2006_02_23_yyk_uvs.fits
wwins J0336+3218_S_2006_02_23_yyk\_map.win
! wwins: Wrote 2 windows to J0336+3218_S_2006_02_23_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.0012597 Jy
! Component: 100  -  total flux cleaned = 0.000974966 Jy
! Component: 150  -  total flux cleaned = -0.00013542 Jy
! Component: 200  -  total flux cleaned = -0.00116639 Jy
! Component: 250  -  total flux cleaned = -0.00200869 Jy
! Component: 300  -  total flux cleaned = -0.00291876 Jy
! Component: 350  -  total flux cleaned = -0.00389788 Jy
! Component: 400  -  total flux cleaned = -0.0046258 Jy
! Component: 450  -  total flux cleaned = -0.00552075 Jy
! Component: 500  -  total flux cleaned = -0.0063773 Jy
! Component: 550  -  total flux cleaned = -0.00711138 Jy
! Component: 600  -  total flux cleaned = -0.00782055 Jy
! Component: 650  -  total flux cleaned = -0.0085114 Jy
! Component: 700  -  total flux cleaned = -0.0090124 Jy
! Component: 750  -  total flux cleaned = -0.00957843 Jy
! Component: 800  -  total flux cleaned = -0.0102841 Jy
! Component: 850  -  total flux cleaned = -0.0106629 Jy
! Component: 900  -  total flux cleaned = -0.0111818 Jy
! Component: 950  -  total flux cleaned = -0.0115412 Jy
! Component: 1000  -  total flux cleaned = -0.011963 Jy
! Component: 1050  -  total flux cleaned = -0.0125082 Jy
! Component: 1100  -  total flux cleaned = -0.0127104 Jy
! Component: 1150  -  total flux cleaned = -0.0133581 Jy
! Component: 1200  -  total flux cleaned = -0.0132943 Jy
! Component: 1250  -  total flux cleaned = -0.0136027 Jy
! Component: 1300  -  total flux cleaned = -0.0137829 Jy
! Component: 1350  -  total flux cleaned = -0.0138995 Jy
! Component: 1400  -  total flux cleaned = -0.0141292 Jy
! Component: 1450  -  total flux cleaned = -0.0142419 Jy
! Component: 1500  -  total flux cleaned = -0.0145149 Jy
! Component: 1550  -  total flux cleaned = -0.0148338 Jy
! Component: 1600  -  total flux cleaned = -0.0148325 Jy
! Component: 1650  -  total flux cleaned = -0.0148323 Jy
! Component: 1700  -  total flux cleaned = -0.0148821 Jy
! Component: 1750  -  total flux cleaned = -0.015175 Jy
! Component: 1800  -  total flux cleaned = -0.0152706 Jy
! Component: 1850  -  total flux cleaned = -0.0155057 Jy
! Component: 1900  -  total flux cleaned = -0.015735 Jy
! Component: 1950  -  total flux cleaned = -0.0158698 Jy
! Component: 2000  -  total flux cleaned = -0.0159584 Jy
! Total flux subtracted in 2048 components = -0.0161766 Jy
! Clean residual min=-0.002245 max=0.002322 Jy/beam
! Clean residual mean=-0.000002 rms=0.000879 Jy/beam
! Combined flux in latest and established models = 2.3978 Jy
keep
! Adding 124 model components to the UV plane model.
! The established model now contains 294 components and 2.3978 Jy
![Exited script file: muppet]
wmap "J0336+3218_S_2006_02_23_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.198 x 9.611 at -24.73 degrees (North through East)
! Clean map  min=-0.012809  max=1.3394 Jy/beam
! Writing clean map to FITS file: J0336+3218_S_2006_02_23_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.33944 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000854992 
device "J0336+3218_S_2006_02_23_yyk\_map.eps/VPS"
! Attempting to open device: 'J0336+3218_S_2006_02_23_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.191496 0.191496 0.382993 0.765985 1.53197 3.06394 6.12788 12.2558 24.5115 49.0231 98.0461
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0025 
print "peak=",int(peak_flux*1000)/1000
! peak= 1.339 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.198 x 9.611 at -24.73 degrees (North through East)
! Clean map  min=-0.012809  max=1.3394 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0336+3218_S_2006_02_23_yyk\_map.gif/gif"
! Attempting to open device: 'J0336+3218_S_2006_02_23_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0336+3218_S_2006_02_23_yyk_uvs.log closed on Wed Jul  5 11:14:25 2006