BFRL Publications - Stone, W. C.
Stone, W. C.
- Architecture for Discrete Construction Component Tracking.
Automation and Robotics in Construction, 16th IAARC/IFAC/IEEE International Symposium. ISARC'99. Proceedings. September 22-24, 1999, Madrid, Spain, Universidad Carlos III de Madrid (UC3M), Spain, Balaguer, C., Editor(s), 289-294 pp, 1999.
Furlani, K. M.; Stone, W. C.
- Automated Earthmoving Status Determination.
Robotics 2000. ASCE Conference on Robotics for Challenging Environments. February 28-March 2, 2000, Albuquerque, NM, 2000.
Stone, W. C.; Cheok, G. S.; Lipman, R. R.
- Automated Part Tracking on the Construction Job Site.
Robotics 2000. ASCE Conference on Robotics for Challenging Environments. February 28-March 2, 2000, Albuquerque, NM, 2000.
Stone, W. C.; Pfeffer, L. E.; Furlani, K. M.
- Automation Infrastructure System for a Robotic 30-Ton Bridge Crane.
Robotics 98 Conference Proceedings. American Society of Civil Engineers. April 26-30, 1998, Albuquerque, NM, 195-201 pp, 1998.
Stone, W. C.; Pfeffer, L. E.
- Automation Infrastructure System for a Robotic 30-Ton Bridge Crane.
Robotics 98 Conference Proceedings. American Society of Civil Engineers. April 26-30, 1998, Albuquerque, NM, 195-201 pp, 1998.
Stone, W. C.; Pfeffer, L. E.
- Beam-to-Column Connections for Precast Concrete Moment-Resisting Frames.
Precast Seismic Structural Systems, 4th Joint Technical Coordinating Committee, Proceedings. May 16-17, 1994, Tsukuba, Japan, 1-8 pp, 1994.
Cheok, G. S.; Stone, W. C.; Stanton, J.; Seagren, D.
- Cumulative Seismic Damage of Circular Bridge Columns: Benchmark and Low-Cycle Fatigue Tests.
ACI Structural Journal, Vol. 96, No. 4, 633-641, July/August 1999.
El-Bahy, A.; Kunnath, S. K.; Stone, W. C.; Taylor, A. W.
- Cumulative Seismic Damage of Circular Bridge Columns: Variable Amplitude Tests.
ACI Structural Journal, Vol. 96, No. 5, 711-719, September/October 1999.
El-Bahy, A.; Kunnath, S. K.; Stone, W. C.; Taylor, A. W.
- Cumulative Seismic Damage of Reinforced Concrete Bridge Piers.
NISTIR 6075; 132 p. October 1997.
Kunnath, S. K.; El-Bahy, A.; Taylor, A. W.; Stone, W. C.
- Design of Extended Range EVA PLSS Systems: Lessons From Terrestrial Exploration Missions.
Space Manufacturing, 12th Conference. Proceedings. Space Studies Institute. May 8-11, 1997, Princeton, NJ, 1997.
Stone, W. C.
- Development of a Robotic Structural Steel Placement System.
NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 263-268 pp, 2002.
Lytle, A. M.; Saidi, K. S.; Stone, W. C.
- Effect of Load Path on Damage to Concrete Bridge Piers.
NIST SP 904; August 1996.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 28th. May 14-17, 1996, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 149-158 pp, 1996.
Taylor, A. W.; El-Bahy, A.; Stone, W. C.; Kunnath, S. K.
- Evaluation of Aerodynamic Drag and Torque for External Tanks in Low Earth Orbit.
Journal of Research of the National Institute of Standards and Technology, Vol. 111, No. 2, 143-159, March/April 2006.
Stone, W. C.; Witzgall, C.
- Fast Variable-Amplitude Cold Gas Thruster.
Journal of Spacecraft and Rockets, Vol. 32, No. 2, 335-343, March/April 1995.
Stone, W. C.
- Field Demonstration of Laser Scanning for Excavation Measurement.
Automation and Robotics in Construction, 17th International Symposium. Proceedings. 2000, 683-688 pp, 2000.
Cheok, G. S.; Lipman, R. R.; Witzgall, C.; Bernal, J.; Stone, W. C.
- Hybrid Reinforced Precast Frame for Seismic Regions.
PCI Journal, Vol. 42, No. 2, 20-32, March/April 1997.
Stanton, J.; Stone, W. C.; Cheok, G. S.
- International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002.
NIST SP 989; 557 p. September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 2002.
Stone, W. C.
- January 17, 1995 Hyogoken-Nanbu (Kobe) Earthquake: Performance of Structures, Lifelines, and Fire Protection Systems.
NIST SP 901; ISCCS TR18; 573 p. July 1996.
Chung, R. M.; Ballantyne, D. B.; Comeau, E.; Holzer, T. L.; Madrzykowski, D.; Schiff, A. J.; Stone, W. C.; Wilcoski, J.; Borcherdt, R. D.; Cooper, J. D.; Lew, H. S.; Moehle, J.; Sheng, L. H.; Taylor, A. W.; Bucker, I.; Hayes, J.; Leyendecker, E. V.; O'Rourke, T.; Singh, M. P.; Whitney, M.
- Ladars for Construction Assessment and Update.
Automation in Construction, Vol. 9, No. 5, 463-477, 2000.
Cheok, G. S.; Stone, W. C.; Lipman, R. R.; Witzgall, C.
- Laser Scanning for Construction Metrology.
Paper 082;Robotics and Remote Systems, 9th International Topical Meeting. Proceedings. American Nuclear Society. Paper 082. March 4-8, 2001, Seattle, WA, 1-9 pp, 2001.
Cheok, G. S.; Stone, W. C.; Lipman, R. R.; Witzgall, C.; Bernal, J.
- Measurement of Internal Strain in Cast-Concrete Structures.
Experimental Mechanics, Vol. 23, No. 4, 361-369, December 1983.
Stone, W. C.
- Mobile Robot Pose Tracking for Performance Analysis.
Performance Metrics for Intelligent Systems PerMIS 2002. August 13-15, 2002, Gaithersburg, MD, 2002.
Lytle, A. M.; Saidi, K. S.; Stone, W. C.; Shneier, M.
- NIST Construction Automation Initiative.
NISTIR 5856; May 1996.National Institute of Standards and Technology. NIST Construction Automation Program, Report No. 2. NIST Construction Automation Workshop. Proceedings. Chapter One: Topical Lectures. Paper 1.3. March 20-31, 1995, 13-21 pp, 1995.
Stone, W. C.
- NIST Construction Automation Program Report No. 1: Non-Line-of-Sight (NLS) Construction Metrology.
NISTIR 5825; 217 p. February 1996.
Stone, W. C.
- NIST Construction Automation Program, Report No. 2. NIST Construction Automation Workshop. Proceedings. March 20-31, 1995.
NISTIR 5856; 156 p. May 1996.National Institute of Standards and Technology. NIST Construction Automation Program, Report No. 2. NIST Construction Automation Workshop. Proceedings. March 20-31, 1995, 1996.
Stone, W. C.
- NIST Construction Automation Program, Report No. 2. NIST Construction Automation Workshop. Proceedings. March 20-31, 1995.
NISTIR 5856; 156 p. May 1996.National Institute of Standards and Technology. NIST Construction Automation Program, Report No. 2. NIST Construction Automation Workshop. Proceedings. March 20-31, 1995, 1996.
Stone, W. C.
- NIST Construction Automation Program Report No. 3: Electromagnetic Signal Attenuation in Construction Materials.
NISTIR 6055; 199 p. October 1997.
Stone, W. C.
- NIST Construction Automation Program Report No. 4: Non-Intrusive Scanning Technology for Construction Status Determination.
NISTIR 6457; 98 p. January 2000.
Cheok, G. S.; Lipman, R. R.; Witzgall, C.; Bernal, J.; Stone, W. C.
- NIST Research Toward Construction Site Integration and Automation.
Journal of Aerospace Engineering, Vol. 12, No. 2, 50-64, April 1999.
Stone, W. C.; Reed, K. A.; Chang, P.; Pfeffer, L. E.; Jacoff, A.
- Non-Intrusive Scanning Technology for Construction Assessment.
Automation and Robotics in Construction, 16th IAARC/IFAC/IEEE International Symposium. ISARC'99. Proceedings. September 22-24, 1999, Madrid, Spain, Universidad Carlos III de Madrid (UC3M), Spain, Balaguer, C., Editor(s), 645-650 pp, 1999.
Cheok, G. S.; Stone, W. C.
- Performance Analysis of Next-Generation LADAR for Manufacturing, Construction, and Mobility.
NISTIR 7117; 198 p. May 2004.
Stone, W. C.; Juberts, M.; Dagalakis, N.; Stone, J.; Gorman, J.
- Performance of 1/3-Scale Model Precast Concrete Beam-Column Connections Subjected to Cyclic Inelastic Loads. Report No. 4.
NISTIR 5436; 65 p. June 1994.
Cheok, G. S.; Stone, W. C.
- Performance of Hybrid Moment-Resisting Precast Beam-Column Concrete Connections Subjected to Cyclic Loading.
Title 92-S22;ACI Structural Journal, Vol. 91, No. 2, 229-249, March/April 1995.
Stone, W. C.; Cheok, G. S.; Stanton, J. F.
- Real-Time GPS and Non-Line-of-Sight Metrology.
NISTIR 5856; May 1996.National Institute of Standards and Technology. NIST Construction Automation Program, Report No. 2. NIST Construction Automation Workshop. Proceedings. Chapter One: Topical Lectures. Paper 1.5. March 20-31, 1995, 29-41 pp, 1995.
Stone, W. C.
- Report of the NIST Workshop on Automated Steel Construction.
NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 247-253 pp, 2002.
Lytle, A. M.; Saidi, K. S.; Stone, W. C.; Gross, J. L.
- Seismic Response of Precast Concrete Frames With Hybrid Connections.
ACI Structural Journal, Vol. 95, No. 5, 527-539, September/October 1998.
Cheok, G. S.; Stone, W. C.; Kunnath, S. K.
- Simplified Design Procedure for Hybrid Precast Concrete Connections.
NISTIR 5765; 92 p. February 1996.
Cheok, G. S.; Stone, W. C.; Nakaki, S. D.
- Surveying Through Solid Walls.
Automation and Robotics in Construction, 14th International Symposium. Proceedings. June 8-11, 1997, Pittsburgh, PA, 22-40 pp, 1997.
Stone, W. C.
- Survey of Construction Metrology Options for AEC Industry.
Journal of Aerospace Engineering, Vol. 12, No. 2, 58-64, April 1999.
Lindfors, C.; Chang, P.; Stone, W. C.
- Toward Next-Generation Construction Machines.
American Nuclear Society. Proceedings. March 4-8, 2001, Seattle, WA, 2001.
Bostelman, R.; Albus, J.; Stone, W. C.
- Towards the Ultimate Construction Site Sensor.
NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 393-400 pp, 2002.
Stone, W. C.; Juberts, M.
- Using LADAR to Characterize the 3-D Shape of Aggregates: Preliminary Results.
Cement and Concrete Research, Vol. 36, No. 6, 1072-1075, June 2006.
Garboczi, E. J.; Cheok, G. S.; Stone, W. C.
Building and Fire Research Laboratory
National Institute of Standards and Technology
Gaithersburg, MD 20899