Processing Job Log for Sequence 10012000, version 007

This is the complete and detailed record of how this sequence was processed.

The following information is also available:

Processing started ( 20:13:36 )

Fetching and uncompressing telemetry, attitude and orbit files ( 20:13:37 )

-> Fetching ft930415_2053.0240.Z
-> Uncompressing ft930415_2053.0240.Z
-> Checking if column TIME in ft930415_2053.0240 is in order
-> Standard Output From FTOOL cktime:

 
Time column is TIME ORDERED

-> Fetching fa930415_2053.0240.Z
-> Uncompressing fa930415_2053.0240.Z
-> Fetching ft930416_0239.0325.Z
-> Uncompressing ft930416_0239.0325.Z
-> Checking if column TIME in ft930416_0239.0325 is in order
-> Standard Output From FTOOL cktime:

 
Time column is TIME ORDERED

-> Fetching fa930416_0239.0325.Z
-> Uncompressing fa930416_0239.0325.Z
-> Checking for overlaps in frf files
-> Checking for overlaps in att files
-> Fetching the latest orbit file
-> Fetching frf.orbit.201

Determine nominal aspect point for the observation ( 20:15:12 )

-> Merging the attitude files

fa930415_2053.0240
fa930416_0239.0325

-> Checking if column TIME in merged.tmp is in order
-> Standard Output From FTOOL cktime:

 
Time column is TIME ORDERED

-> Running attitude FTOOL on merged attitude file
-> Standard Output From FTOOL attitude:

ATTITUDE_V0.9j
 
   reading attitude file:./merged.tmp
   open asc  output file:out.tmp
 
 AVERAGE ASPECT AND OFFSET FOR THIS ATTITUDE FILE:
 
 Attitude file start and stop ascatime :   9060828.203900   9084304.119400
 Data     file start and stop ascatime :   9060828.203900   9084304.119400
 Aspecting run start and stop ascatime :   9060828.203988   9084304.119301
 
 Time interval averaged over (seconds) :     23475.915313
 Total pointing and manuver time (sec) :     23475.982422         0.000000
 
 Mean boresight Euler angles :     94.547782      80.761946     172.643481
 
                                    RA             DEC         SUN ANGLE
 
 Mean solar position   (deg) :     23.20           9.69
 Mean aberration    (arcsec) :     -7.39          -4.45
 
 Mean sat X-axis       (deg) :    235.741111      78.210611      90.28
 Mean sat Y-axis       (deg) :      3.360427       7.260586      19.77
 Mean sat Z-axis       (deg) :     94.547782       9.238054      70.23
 
                      RA            DEC            ROLL          OFFSET
                    (deg)          (deg)          (deg)         (arcmin)
 
 Average            94.277946       9.138819      82.686569       0.111693
 Minimum            94.271492       9.109972      82.644150       0.000000
 Maximum            94.295860       9.140957      82.692757       1.992520
 Sigma (RMS)         0.000289       0.000430       0.002257       0.223425
 
 Number of ASPECT records processed =      31056
 
 Aspecting to RA/DEC                   :      94.27794647       9.13881874
    closing output   file...
    closing attitude file...

-> Standard Output From STOOL checkatt:

  
 Opening file: ./out.tmp                                                       
  
  ***************** Observation Info ******************
  
  RA (J2000 deg):   94.278 DEC:    9.139
  
  START TIME: SC   9060828.2040 = UT 15/04/93 20:53:48      
  
  ****** Definition of Attitude SENSOR Bit Flags ******
  
 Sensors used in the attitude determination and attitude control mode  
                                 1: USED,   0: NOT USED                
  
 B0:STT-A, B1:STT-B, B2:NSAS,  B3:GAS,    B4:SSAS-SA, B5:SSAS-SB,      
 B6:IRU-X, B7:IRU-Y, B8:IRU-Z, B9:IRU-S1, B10:IRU-S2,                  
 B11: Attitude control mode    1: coarse, 0: fine                      
 B12: Sun presence             1: day,    0: night                     
 B13: STT-A earth occultation  1: earth occultation, 0: no occultation 
 B14: STT-B earth occultation  1: earth occultation, 0: no occultation 
 B16,17,18: STT-A track stars no.1,2,3,     1: USED, 0: NOT USED       
 B19,20,21: STT-B track stars no.1,2,3,     1: USED, 0: NOT USED       
 B22,23: always 0                                                      
  
  ******** Attitude File Reconstruction Summary *******
  
                                    S S N G S S I I I I I A S S S S S
                                    T T S A S S R R R R R C U T T T T
                                    T T A S A A U U U U U M N T T T T
                                    - - S . A A - - - - - . . - - - -
                                    A B . . - - X Y Z S S . . A B A B
                                    . . . . S S . . . 1 2 . . O O S S
     offset_time separation sensor  . . . . A B . . . . . . . C C T T
        (sec)     (arcmin)          . . . . . . . . . . . . . C C R R
  
                             BIT:   0 1 2 3 4 5 6 7 8 9 A B C D E
  
       4.000107      1.621      0   0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
     854.496948      0.621      0   0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
   23475.916016      0.129      0   0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  
  Attitude  Records:   31056
  Attitude    Steps:   3
  
  Maneuver ACM time:   0. sec
  Pointed  ACM time:     23476.1 sec

-> Calculating aspect point
-> Output from aspect:

97 97 count=2165 sum1=204684 sum2=174847 sum3=373777
97 98 count=11 sum1=1039.99 sum2=888.393 sum3=1899.1
98 97 count=25595 sum1=2.41995e+06 sum2=2.06709e+06 sum3=4.41881e+06
98 98 count=2736 sum1=258687 sum2=220970 sum3=472351
98 99 count=17 sum1=1607.45 sum2=1373.16 sum3=2934.92
99 99 count=184 sum1=17398.8 sum2=14863.2 sum3=31766.3
99 100 count=341 sum1=32246.3 sum2=27548.7 sum3=58870.4
100 100 count=6 sum1=567.396 sum2=484.704 sum3=1035.67
0 out of 31055 points outside bin structure

-> Euler angles: 94.5475, 80.7616, 172.644
-> RA=94.2777 Dec=9.13916 Roll=82.6871
-> Galactic coordinates Lii=200.874133 Bii=-3.364837
-> Running fixatt on fa930415_2053.0240
-> Running fixatt on fa930416_0239.0325

Running frfread on telemetry files ( 20:16:14 )

-> Running frfread3.032 on the following telemetry files:

frf_directory,s,h,"./",,,"frf directory"
frf_file,s,h,"ft930415_2053.0240",,,"frf telemetry file"
frf_file,s,h,"ft930416_0239.0325",,,"frf telemetry file"

-> Standard Output From FTOOL frfread:

Frfread version 3.00 patch 32
ASCA format
Telemetry file: ft930415_2053.0240
Initial mode = 1  (Faint)
Initial value for dummy = 0
Initial datamode = 0  (Observation)
Initial sis = 0
Initial bit_rate = 2
Reading all superframes
reading PH mode
reading PCAL mode
reading MPCmode
No mode = 0
Faint = 317504
Bright = 141632
Fast = 0
Frame = 0
Dark frame = 1280
Histogram = 0
Integration = 0
PH = 460416
MPC = 0
PCAL = 0
Memory Check = 0
Number of superframes = 7215
no. of SIS events found = 798091
ASCA format
Telemetry file: ft930416_0239.0325
Initial mode = 1  (Faint)
Initial value for dummy = 0
Initial datamode = 0  (Observation)
Initial sis = 0
Initial bit_rate = 4
Reading all superframes
reading PH mode
reading PCAL mode
reading MPCmode
No mode = 0
Faint = 32448
Bright = 4096
Fast = 0
Frame = 0
Dark frame = 0
Histogram = 0
Integration = 0
PH = 36544
MPC = 0
PCAL = 0
Memory Check = 0
Number of superframes = 615
no. of SIS events found = 113564

-> Standard Error Output From FTOOL frfread

coordinate error 503 292

-> Removing the following files with NEVENTS=0

ft930415_2053_0240G200899.fits
ft930415_2053_0240G201070H.fits
ft930415_2053_0240G201170M.fits
ft930415_2053_0240G201270M.fits
ft930415_2053_0240G201399.fits
ft930415_2053_0240G201470H.fits
ft930415_2053_0240G201899.fits
ft930415_2053_0240G202170H.fits
ft930415_2053_0240G202270H.fits
ft930415_2053_0240G202370H.fits
ft930415_2053_0240G202870H.fits
ft930415_2053_0240G202970H.fits
ft930415_2053_0240G203070M.fits
ft930415_2053_0240G203899.fits
ft930415_2053_0240G204070H.fits
ft930415_2053_0240G204170H.fits
ft930415_2053_0240G204270M.fits
ft930415_2053_0240G204370M.fits
ft930415_2053_0240G204499.fits
ft930415_2053_0240G204570M.fits
ft930415_2053_0240G300170M.fits
ft930415_2053_0240G300899.fits
ft930415_2053_0240G301070H.fits
ft930415_2053_0240G301170H.fits
ft930415_2053_0240G301270M.fits
ft930415_2053_0240G301370M.fits
ft930415_2053_0240G301499.fits
ft930415_2053_0240G301999.fits
ft930415_2053_0240G302370H.fits
ft930415_2053_0240G302470H.fits
ft930415_2053_0240G302870H.fits
ft930415_2053_0240G302970H.fits
ft930415_2053_0240G303070M.fits
ft930415_2053_0240G303170M.fits
ft930415_2053_0240G303899.fits
ft930415_2053_0240G304070H.fits
ft930415_2053_0240G304170H.fits
ft930415_2053_0240G304270M.fits
ft930415_2053_0240G304370M.fits
ft930415_2053_0240G304499.fits
ft930415_2053_0240G304570M.fits
ft930415_2053_0240S000101M.fits
ft930415_2053_0240S000499.fits
ft930415_2053_0240S000901M.fits
ft930415_2053_0240S001099.fits
ft930415_2053_0240S001205H.fits
ft930415_2053_0240S001499.fits
ft930415_2053_0240S001701M.fits
ft930415_2053_0240S002099.fits
ft930415_2053_0240S002402M.fits
ft930415_2053_0240S002599.fits
ft930415_2053_0240S100101M.fits
ft930415_2053_0240S100499.fits
ft930415_2053_0240S100901M.fits
ft930415_2053_0240S101099.fits
ft930415_2053_0240S101205H.fits
ft930415_2053_0240S101499.fits
ft930415_2053_0240S101701M.fits
ft930415_2053_0240S102099.fits
ft930415_2053_0240S102402M.fits
ft930415_2053_0240S102599.fits
ft930416_0239_0325G200370M.fits
ft930416_0239_0325G300370M.fits
ft930416_0239_0325S000302M.fits
ft930416_0239_0325S100302M.fits

-> Checking for empty GTI extensions
-> Checking housekeeping files for valid TSTART and TSTOP
-> Appending ALLGTI extensions to housekeeping files
-> Merging GTIs from the following files:

ft930415_2053_0240S000201M.fits[3]
ft930415_2053_0240S000301H.fits[3]
ft930415_2053_0240S000501H.fits[3]
ft930415_2053_0240S000601H.fits[3]
ft930415_2053_0240S000701H.fits[3]
ft930415_2053_0240S000801M.fits[3]
ft930415_2053_0240S001101H.fits[3]
ft930415_2053_0240S001301H.fits[3]
ft930415_2053_0240S001501H.fits[3]
ft930415_2053_0240S001601H.fits[3]
ft930415_2053_0240S001801M.fits[3]
ft930415_2053_0240S001901H.fits[3]
ft930415_2053_0240S002101H.fits[3]
ft930415_2053_0240S002202H.fits[3]
ft930415_2053_0240S002302H.fits[3]
ft930415_2053_0240S002602M.fits[3]
ft930415_2053_0240S002702H.fits[3]
ft930415_2053_0240S002801H.fits[3]
ft930416_0239_0325S000101H.fits[3]
ft930416_0239_0325S000202M.fits[3]

-> Merging GTIs from the following files:

ft930415_2053_0240S100201M.fits[3]
ft930415_2053_0240S100301H.fits[3]
ft930415_2053_0240S100501H.fits[3]
ft930415_2053_0240S100601H.fits[3]
ft930415_2053_0240S100701H.fits[3]
ft930415_2053_0240S100801M.fits[3]
ft930415_2053_0240S101101H.fits[3]
ft930415_2053_0240S101301H.fits[3]
ft930415_2053_0240S101501H.fits[3]
ft930415_2053_0240S101601H.fits[3]
ft930415_2053_0240S101801M.fits[3]
ft930415_2053_0240S101901H.fits[3]
ft930415_2053_0240S102101H.fits[3]
ft930415_2053_0240S102202H.fits[3]
ft930415_2053_0240S102302H.fits[3]
ft930415_2053_0240S102602M.fits[3]
ft930415_2053_0240S102702H.fits[3]
ft930415_2053_0240S102801H.fits[3]
ft930416_0239_0325S100101H.fits[3]
ft930416_0239_0325S100202M.fits[3]

-> Merging GTIs from the following files:

ft930415_2053_0240G200170M.fits[3]
ft930415_2053_0240G200270M.fits[3]
ft930415_2053_0240G200370M.fits[3]
ft930415_2053_0240G200470H.fits[3]
ft930415_2053_0240G200570H.fits[3]
ft930415_2053_0240G200670H.fits[3]
ft930415_2053_0240G200770H.fits[3]
ft930415_2053_0240G200970H.fits[3]
ft930415_2053_0240G201570H.fits[3]
ft930415_2053_0240G201670H.fits[3]
ft930415_2053_0240G201770H.fits[3]
ft930415_2053_0240G201970H.fits[3]
ft930415_2053_0240G202070H.fits[3]
ft930415_2053_0240G202470H.fits[3]
ft930415_2053_0240G202570H.fits[3]
ft930415_2053_0240G202670H.fits[3]
ft930415_2053_0240G202770H.fits[3]
ft930415_2053_0240G203170M.fits[3]
ft930415_2053_0240G203270M.fits[3]
ft930415_2053_0240G203370M.fits[3]
ft930415_2053_0240G203470H.fits[3]
ft930415_2053_0240G203570H.fits[3]
ft930415_2053_0240G203670H.fits[3]
ft930415_2053_0240G203770H.fits[3]
ft930415_2053_0240G203970H.fits[3]
ft930415_2053_0240G204670M.fits[3]
ft930415_2053_0240G204770M.fits[3]
ft930415_2053_0240G204870H.fits[3]
ft930415_2053_0240G204970H.fits[3]
ft930415_2053_0240G205070H.fits[3]
ft930415_2053_0240G205170H.fits[3]
ft930416_0239_0325G200170H.fits[3]
ft930416_0239_0325G200270M.fits[3]

-> Merging GTIs from the following files:

ft930415_2053_0240G300270M.fits[3]
ft930415_2053_0240G300370M.fits[3]
ft930415_2053_0240G300470H.fits[3]
ft930415_2053_0240G300570H.fits[3]
ft930415_2053_0240G300670H.fits[3]
ft930415_2053_0240G300770H.fits[3]
ft930415_2053_0240G300970H.fits[3]
ft930415_2053_0240G301570H.fits[3]
ft930415_2053_0240G301670H.fits[3]
ft930415_2053_0240G301770H.fits[3]
ft930415_2053_0240G301870H.fits[3]
ft930415_2053_0240G302070H.fits[3]
ft930415_2053_0240G302170H.fits[3]
ft930415_2053_0240G302270H.fits[3]
ft930415_2053_0240G302570H.fits[3]
ft930415_2053_0240G302670H.fits[3]
ft930415_2053_0240G302770H.fits[3]
ft930415_2053_0240G303270M.fits[3]
ft930415_2053_0240G303370M.fits[3]
ft930415_2053_0240G303470H.fits[3]
ft930415_2053_0240G303570H.fits[3]
ft930415_2053_0240G303670H.fits[3]
ft930415_2053_0240G303770H.fits[3]
ft930415_2053_0240G303970H.fits[3]
ft930415_2053_0240G304670M.fits[3]
ft930415_2053_0240G304770M.fits[3]
ft930415_2053_0240G304870H.fits[3]
ft930415_2053_0240G304970H.fits[3]
ft930415_2053_0240G305070H.fits[3]
ft930415_2053_0240G305170H.fits[3]
ft930416_0239_0325G300170H.fits[3]
ft930416_0239_0325G300270M.fits[3]

Merging event files from frfread ( 20:29:11 )

-> Collecting GIS2 event files by mode
-> Standard Error Output From STOOL gissortcode:

GISSORTCODE:LO:Start program
GISSORTCODE:LO:End program

-> Standard Error Output From STOOL gissortsplit:

GISSORTSPLIT:LO:Start program
GISSORTSPLIT:LO:g200170h.prelist merge count = 1 photon cnt = 6
GISSORTSPLIT:LO:g200270h.prelist merge count = 1 photon cnt = 4
GISSORTSPLIT:LO:g200370h.prelist merge count = 8 photon cnt = 178048
GISSORTSPLIT:LO:g200470h.prelist merge count = 4 photon cnt = 16
GISSORTSPLIT:LO:g200570h.prelist merge count = 1 photon cnt = 5
GISSORTSPLIT:LO:g200670h.prelist merge count = 1 photon cnt = 2
GISSORTSPLIT:LO:g200770h.prelist merge count = 1 photon cnt = 3
GISSORTSPLIT:LO:g200870h.prelist merge count = 1 photon cnt = 4
GISSORTSPLIT:LO:g200970h.prelist merge count = 1 photon cnt = 6
GISSORTSPLIT:LO:g201070h.prelist merge count = 1 photon cnt = 5
GISSORTSPLIT:LO:g201170h.prelist merge count = 1 photon cnt = 2
GISSORTSPLIT:LO:g201270h.prelist merge count = 1 photon cnt = 26
GISSORTSPLIT:LO:g201370h.prelist merge count = 1 photon cnt = 160
GISSORTSPLIT:LO:g200170m.prelist merge count = 2 photon cnt = 3
GISSORTSPLIT:LO:g200270m.prelist merge count = 2 photon cnt = 67
GISSORTSPLIT:LO:g200370m.prelist merge count = 1 photon cnt = 35
GISSORTSPLIT:LO:g200470m.prelist merge count = 3 photon cnt = 106
GISSORTSPLIT:LO:Total filenames split = 31
GISSORTSPLIT:LO:Total split file cnt = 17
GISSORTSPLIT:LO:End program

-> Creating ad10012000g200170h.unf
-> Standard Output From STOOL cmerge:

---- cmerge:  version 1.5 ----

A total of  8  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930415_2053_0240G200770H.fits 
 2 -- ft930415_2053_0240G200970H.fits 
 3 -- ft930415_2053_0240G201770H.fits 
 4 -- ft930415_2053_0240G201970H.fits 
 5 -- ft930415_2053_0240G202770H.fits 
 6 -- ft930415_2053_0240G203770H.fits 
 7 -- ft930415_2053_0240G203970H.fits 
 8 -- ft930415_2053_0240G205170H.fits 
Merging binary extension #: 2 
 1 -- ft930415_2053_0240G200770H.fits 
 2 -- ft930415_2053_0240G200970H.fits 
 3 -- ft930415_2053_0240G201770H.fits 
 4 -- ft930415_2053_0240G201970H.fits 
 5 -- ft930415_2053_0240G202770H.fits 
 6 -- ft930415_2053_0240G203770H.fits 
 7 -- ft930415_2053_0240G203970H.fits 
 8 -- ft930415_2053_0240G205170H.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully!

-> Ignoring the following files containing 000000160 events

ft930415_2053_0240G202670H.fits

-> Ignoring the following files containing 000000106 events

ft930415_2053_0240G200370M.fits
ft930415_2053_0240G203370M.fits
ft930415_2053_0240G204770M.fits

-> Ignoring the following files containing 000000067 events

ft930415_2053_0240G200270M.fits
ft930415_2053_0240G203270M.fits

-> Ignoring the following files containing 000000035 events

ft930415_2053_0240G204670M.fits

-> Ignoring the following files containing 000000026 events

ft930415_2053_0240G202570H.fits

-> Ignoring the following files containing 000000016 events

ft930415_2053_0240G200670H.fits
ft930415_2053_0240G201670H.fits
ft930415_2053_0240G203670H.fits
ft930415_2053_0240G205070H.fits

-> Ignoring the following files containing 000000006 events

ft930415_2053_0240G204870H.fits

-> Ignoring the following files containing 000000006 events

ft930415_2053_0240G202470H.fits

-> Ignoring the following files containing 000000005 events

ft930415_2053_0240G204970H.fits

-> Ignoring the following files containing 000000005 events

ft930415_2053_0240G203470H.fits

-> Ignoring the following files containing 000000004 events

ft930415_2053_0240G200570H.fits

-> Ignoring the following files containing 000000004 events

ft930415_2053_0240G202070H.fits

-> Ignoring the following files containing 000000003 events

ft930415_2053_0240G200470H.fits

-> Ignoring the following files containing 000000003 events

ft930415_2053_0240G200170M.fits
ft930415_2053_0240G203170M.fits

-> Ignoring the following files containing 000000002 events

ft930415_2053_0240G201570H.fits

-> Ignoring the following files containing 000000002 events

ft930415_2053_0240G203570H.fits

-> Collecting GIS3 event files by mode
-> Standard Error Output From STOOL gissortcode:

GISSORTCODE:LO:Start program
GISSORTCODE:LO:End program

-> Standard Error Output From STOOL gissortsplit:

GISSORTSPLIT:LO:Start program
GISSORTSPLIT:LO:g300170h.prelist merge count = 1 photon cnt = 8
GISSORTSPLIT:LO:g300270h.prelist merge count = 1 photon cnt = 37
GISSORTSPLIT:LO:g300370h.prelist merge count = 8 photon cnt = 182456
GISSORTSPLIT:LO:g300470h.prelist merge count = 4 photon cnt = 25
GISSORTSPLIT:LO:g300570h.prelist merge count = 1 photon cnt = 7
GISSORTSPLIT:LO:g300670h.prelist merge count = 1 photon cnt = 2
GISSORTSPLIT:LO:g300770h.prelist merge count = 1 photon cnt = 5
GISSORTSPLIT:LO:g300870h.prelist merge count = 1 photon cnt = 3
GISSORTSPLIT:LO:g300970h.prelist merge count = 1 photon cnt = 1
GISSORTSPLIT:LO:g301070h.prelist merge count = 1 photon cnt = 5
GISSORTSPLIT:LO:g301170h.prelist merge count = 1 photon cnt = 6
GISSORTSPLIT:LO:g301270h.prelist merge count = 1 photon cnt = 6
GISSORTSPLIT:LO:g301370h.prelist merge count = 1 photon cnt = 2
GISSORTSPLIT:LO:g301470h.prelist merge count = 1 photon cnt = 43
GISSORTSPLIT:LO:g300170m.prelist merge count = 3 photon cnt = 79
GISSORTSPLIT:LO:g300270m.prelist merge count = 3 photon cnt = 90
GISSORTSPLIT:LO:Total filenames split = 30
GISSORTSPLIT:LO:Total split file cnt = 16
GISSORTSPLIT:LO:End program

-> Creating ad10012000g300170h.unf
-> Standard Output From STOOL cmerge:

---- cmerge:  version 1.5 ----

A total of  8  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930415_2053_0240G300770H.fits 
 2 -- ft930415_2053_0240G300970H.fits 
 3 -- ft930415_2053_0240G301870H.fits 
 4 -- ft930415_2053_0240G302070H.fits 
 5 -- ft930415_2053_0240G302770H.fits 
 6 -- ft930415_2053_0240G303770H.fits 
 7 -- ft930415_2053_0240G303970H.fits 
 8 -- ft930415_2053_0240G305170H.fits 
Merging binary extension #: 2 
 1 -- ft930415_2053_0240G300770H.fits 
 2 -- ft930415_2053_0240G300970H.fits 
 3 -- ft930415_2053_0240G301870H.fits 
 4 -- ft930415_2053_0240G302070H.fits 
 5 -- ft930415_2053_0240G302770H.fits 
 6 -- ft930415_2053_0240G303770H.fits 
 7 -- ft930415_2053_0240G303970H.fits 
 8 -- ft930415_2053_0240G305170H.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully!

-> Ignoring the following files containing 000000090 events

ft930415_2053_0240G300370M.fits
ft930415_2053_0240G303370M.fits
ft930415_2053_0240G304770M.fits

-> Ignoring the following files containing 000000079 events

ft930415_2053_0240G300270M.fits
ft930415_2053_0240G303270M.fits
ft930415_2053_0240G304670M.fits

-> Ignoring the following files containing 000000043 events

ft930415_2053_0240G302170H.fits

-> Ignoring the following files containing 000000037 events

ft930415_2053_0240G302670H.fits

-> Ignoring the following files containing 000000025 events

ft930415_2053_0240G300670H.fits
ft930415_2053_0240G301770H.fits
ft930415_2053_0240G303670H.fits
ft930415_2053_0240G305070H.fits

-> Ignoring the following files containing 000000008 events

ft930415_2053_0240G302570H.fits

-> Ignoring the following files containing 000000007 events

ft930415_2053_0240G303470H.fits

-> Ignoring the following files containing 000000006 events

ft930415_2053_0240G301670H.fits

-> Ignoring the following files containing 000000006 events

ft930415_2053_0240G301570H.fits

-> Ignoring the following files containing 000000005 events

ft930415_2053_0240G300570H.fits

-> Ignoring the following files containing 000000005 events

ft930415_2053_0240G304870H.fits

-> Ignoring the following files containing 000000003 events

ft930415_2053_0240G304970H.fits

-> Ignoring the following files containing 000000002 events

ft930415_2053_0240G302270H.fits

-> Ignoring the following files containing 000000002 events

ft930415_2053_0240G303570H.fits

-> Ignoring the following files containing 000000001 events

ft930415_2053_0240G300470H.fits

-> Collecting SIS0 event files by mode
-> Standard Error Output From STOOL sis0sortcode:

SIS0SORTCODE:LO:Start program
SIS0SORTCODE:LO:End program

-> Standard Error Output From STOOL sis0sortsplit:

SIS0SORTSPLIT:LO:Start program
SIS0SORTSPLIT:LO:s000101h.prelist merge count = 9 photon cnt = 310963
SIS0SORTSPLIT:LO:s000201h.prelist merge count = 2 photon cnt = 500
SIS0SORTSPLIT:LO:s000301m.prelist merge count = 3 photon cnt = 4635
SIS0SORTSPLIT:LO:s000402h.prelist merge count = 2 photon cnt = 91545
SIS0SORTSPLIT:LO:s000502h.prelist merge count = 1 photon cnt = 227
SIS0SORTSPLIT:LO:s000602m.prelist merge count = 1 photon cnt = 403
SIS0SORTSPLIT:LO:Total filenames split = 18
SIS0SORTSPLIT:LO:Total split file cnt = 6
SIS0SORTSPLIT:LO:End program

-> Creating ad10012000s000101h.unf
-> Standard Output From STOOL cmerge:

---- cmerge:  version 1.5 ----

A total of  9  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930415_2053_0240S000301H.fits 
 2 -- ft930415_2053_0240S000501H.fits 
 3 -- ft930415_2053_0240S000701H.fits 
 4 -- ft930415_2053_0240S001101H.fits 
 5 -- ft930415_2053_0240S001301H.fits 
 6 -- ft930415_2053_0240S001501H.fits 
 7 -- ft930415_2053_0240S001901H.fits 
 8 -- ft930415_2053_0240S002101H.fits 
 9 -- ft930415_2053_0240S002801H.fits 
Merging binary extension #: 2 
 1 -- ft930415_2053_0240S000301H.fits 
 2 -- ft930415_2053_0240S000501H.fits 
 3 -- ft930415_2053_0240S000701H.fits 
 4 -- ft930415_2053_0240S001101H.fits 
 5 -- ft930415_2053_0240S001301H.fits 
 6 -- ft930415_2053_0240S001501H.fits 
 7 -- ft930415_2053_0240S001901H.fits 
 8 -- ft930415_2053_0240S002101H.fits 
 9 -- ft930415_2053_0240S002801H.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully!

-> Creating ad10012000s000202h.unf
-> Standard Output From STOOL cmerge:

---- cmerge:  version 1.5 ----

A total of  2  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930415_2053_0240S002202H.fits 
 2 -- ft930415_2053_0240S002702H.fits 
Merging binary extension #: 2 
 1 -- ft930415_2053_0240S002202H.fits 
 2 -- ft930415_2053_0240S002702H.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully!

-> Creating ad10012000s000301m.unf
-> Standard Output From STOOL cmerge:

---- cmerge:  version 1.5 ----

A total of  3  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930415_2053_0240S000201M.fits 
 2 -- ft930415_2053_0240S000801M.fits 
 3 -- ft930415_2053_0240S001801M.fits 
Merging binary extension #: 2 
 1 -- ft930415_2053_0240S000201M.fits 
 2 -- ft930415_2053_0240S000801M.fits 
 3 -- ft930415_2053_0240S001801M.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully!

-> Ignoring the following files containing 000000500 events

ft930415_2053_0240S000601H.fits
ft930415_2053_0240S001601H.fits

-> Ignoring the following files containing 000000403 events

ft930415_2053_0240S002602M.fits

-> Ignoring the following files containing 000000227 events

ft930415_2053_0240S002302H.fits

-> Collecting SIS1 event files by mode
-> Standard Error Output From STOOL sis1sortcode:

SIS1SORTCODE:LO:Start program
SIS1SORTCODE:LO:End program

-> Standard Error Output From STOOL sis1sortsplit:

SIS1SORTSPLIT:LO:Start program
SIS1SORTSPLIT:LO:s100101h.prelist merge count = 9 photon cnt = 287153
SIS1SORTSPLIT:LO:s100201h.prelist merge count = 2 photon cnt = 216
SIS1SORTSPLIT:LO:s100301m.prelist merge count = 3 photon cnt = 4963
SIS1SORTSPLIT:LO:s100402h.prelist merge count = 2 photon cnt = 96854
SIS1SORTSPLIT:LO:s100502h.prelist merge count = 1 photon cnt = 264
SIS1SORTSPLIT:LO:s100602m.prelist merge count = 1 photon cnt = 367
SIS1SORTSPLIT:LO:Total filenames split = 18
SIS1SORTSPLIT:LO:Total split file cnt = 6
SIS1SORTSPLIT:LO:End program

-> Creating ad10012000s100101h.unf
-> Standard Output From STOOL cmerge:

---- cmerge:  version 1.5 ----

A total of  9  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930415_2053_0240S100301H.fits 
 2 -- ft930415_2053_0240S100501H.fits 
 3 -- ft930415_2053_0240S100701H.fits 
 4 -- ft930415_2053_0240S101101H.fits 
 5 -- ft930415_2053_0240S101301H.fits 
 6 -- ft930415_2053_0240S101501H.fits 
 7 -- ft930415_2053_0240S101901H.fits 
 8 -- ft930415_2053_0240S102101H.fits 
 9 -- ft930415_2053_0240S102801H.fits 
Merging binary extension #: 2 
 1 -- ft930415_2053_0240S100301H.fits 
 2 -- ft930415_2053_0240S100501H.fits 
 3 -- ft930415_2053_0240S100701H.fits 
 4 -- ft930415_2053_0240S101101H.fits 
 5 -- ft930415_2053_0240S101301H.fits 
 6 -- ft930415_2053_0240S101501H.fits 
 7 -- ft930415_2053_0240S101901H.fits 
 8 -- ft930415_2053_0240S102101H.fits 
 9 -- ft930415_2053_0240S102801H.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully!

-> Creating ad10012000s100202h.unf
-> Standard Output From STOOL cmerge:

---- cmerge:  version 1.5 ----

A total of  2  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930415_2053_0240S102202H.fits 
 2 -- ft930415_2053_0240S102702H.fits 
Merging binary extension #: 2 
 1 -- ft930415_2053_0240S102202H.fits 
 2 -- ft930415_2053_0240S102702H.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully!

-> Creating ad10012000s100301m.unf
-> Standard Output From STOOL cmerge:

---- cmerge:  version 1.5 ----

A total of  3  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930415_2053_0240S100201M.fits 
 2 -- ft930415_2053_0240S100801M.fits 
 3 -- ft930415_2053_0240S101801M.fits 
Merging binary extension #: 2 
 1 -- ft930415_2053_0240S100201M.fits 
 2 -- ft930415_2053_0240S100801M.fits 
 3 -- ft930415_2053_0240S101801M.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully!

-> Ignoring the following files containing 000000367 events

ft930415_2053_0240S102602M.fits

-> Ignoring the following files containing 000000264 events

ft930415_2053_0240S102302H.fits

-> Ignoring the following files containing 000000216 events

ft930415_2053_0240S100601H.fits
ft930415_2053_0240S101601H.fits

-> Collecting GIS2 event files by mode
-> Standard Error Output From STOOL gissortcode:

GISSORTCODE:LO:Start program
GISSORTCODE:LO:End program

-> Standard Error Output From STOOL gissortsplit:

GISSORTSPLIT:LO:Start program
GISSORTSPLIT:LO:g200170h.prelist merge count = 1 photon cnt = 28126
GISSORTSPLIT:LO:g200170m.prelist merge count = 1 photon cnt = 6139
GISSORTSPLIT:LO:Total filenames split = 2
GISSORTSPLIT:LO:Total split file cnt = 2
GISSORTSPLIT:LO:End program

-> Creating ad10012000g200270h.unf
-> Standard Output From STOOL cmerge:

---- cmerge:  version 1.5 ----

A total of  1  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930416_0239_0325G200170H.fits 
Merging binary extension #: 2 
 1 -- ft930416_0239_0325G200170H.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully!

-> Checking ft930416_0239_0325G200270M.fits
-> Creating ad10012000g200370m.unf
-> Standard Output From STOOL cmerge:

---- cmerge:  version 1.5 ----

A total of  1  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930416_0239_0325G200270M.fits 
Merging binary extension #: 2 
 1 -- ft930416_0239_0325G200270M.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully!

-> Collecting GIS3 event files by mode
-> Standard Error Output From STOOL gissortcode:

GISSORTCODE:LO:Start program
GISSORTCODE:LO:End program

-> Standard Error Output From STOOL gissortsplit:

GISSORTSPLIT:LO:Start program
GISSORTSPLIT:LO:g300170h.prelist merge count = 1 photon cnt = 28746
GISSORTSPLIT:LO:g300170m.prelist merge count = 1 photon cnt = 6149
GISSORTSPLIT:LO:Total filenames split = 2
GISSORTSPLIT:LO:Total split file cnt = 2
GISSORTSPLIT:LO:End program

-> Creating ad10012000g300270h.unf
-> Standard Output From STOOL cmerge:

---- cmerge:  version 1.5 ----

A total of  1  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930416_0239_0325G300170H.fits 
Merging binary extension #: 2 
 1 -- ft930416_0239_0325G300170H.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully!

-> Checking ft930416_0239_0325G300270M.fits
-> Creating ad10012000g300370m.unf
-> Standard Output From STOOL cmerge:

---- cmerge:  version 1.5 ----

A total of  1  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930416_0239_0325G300270M.fits 
Merging binary extension #: 2 
 1 -- ft930416_0239_0325G300270M.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully!

-> Collecting SIS0 event files by mode
-> Standard Error Output From STOOL sis0sortcode:

SIS0SORTCODE:LO:Start program
SIS0SORTCODE:LO:End program

-> Standard Error Output From STOOL sis0sortsplit:

SIS0SORTSPLIT:LO:Start program
SIS0SORTSPLIT:LO:s000101h.prelist merge count = 1 photon cnt = 43500
SIS0SORTSPLIT:LO:s000202m.prelist merge count = 1 photon cnt = 13174
SIS0SORTSPLIT:LO:Total filenames split = 2
SIS0SORTSPLIT:LO:Total split file cnt = 2
SIS0SORTSPLIT:LO:End program

-> Creating ad10012000s000401h.unf
-> Standard Output From STOOL cmerge:

---- cmerge:  version 1.5 ----

A total of  1  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930416_0239_0325S000101H.fits 
Merging binary extension #: 2 
 1 -- ft930416_0239_0325S000101H.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully!

-> Checking ft930416_0239_0325S000202M.fits
-> Creating ad10012000s000502m.unf
-> Standard Output From STOOL cmerge:

---- cmerge:  version 1.5 ----

A total of  1  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930416_0239_0325S000202M.fits 
Merging binary extension #: 2 
 1 -- ft930416_0239_0325S000202M.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully!

-> Collecting SIS1 event files by mode
-> Standard Error Output From STOOL sis1sortcode:

SIS1SORTCODE:LO:Start program
SIS1SORTCODE:LO:End program

-> Standard Error Output From STOOL sis1sortsplit:

SIS1SORTSPLIT:LO:Start program
SIS1SORTSPLIT:LO:s100101h.prelist merge count = 1 photon cnt = 41959
SIS1SORTSPLIT:LO:s100202m.prelist merge count = 1 photon cnt = 14931
SIS1SORTSPLIT:LO:Total filenames split = 2
SIS1SORTSPLIT:LO:Total split file cnt = 2
SIS1SORTSPLIT:LO:End program

-> Creating ad10012000s100401h.unf
-> Standard Output From STOOL cmerge:

---- cmerge:  version 1.5 ----

A total of  1  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930416_0239_0325S100101H.fits 
Merging binary extension #: 2 
 1 -- ft930416_0239_0325S100101H.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully!

-> Checking ft930416_0239_0325S100202M.fits
-> Creating ad10012000s100502m.unf
-> Standard Output From STOOL cmerge:

---- cmerge:  version 1.5 ----

A total of  1  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930416_0239_0325S100202M.fits 
Merging binary extension #: 2 
 1 -- ft930416_0239_0325S100202M.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully!

-> Tar-ing together the leftover raw files

a ft930415_2053_0240G200170M.fits 40K
a ft930415_2053_0240G200270M.fits 40K
a ft930415_2053_0240G200370M.fits 40K
a ft930415_2053_0240G200470H.fits 40K
a ft930415_2053_0240G200570H.fits 40K
a ft930415_2053_0240G200670H.fits 40K
a ft930415_2053_0240G201570H.fits 40K
a ft930415_2053_0240G201670H.fits 40K
a ft930415_2053_0240G202070H.fits 40K
a ft930415_2053_0240G202470H.fits 40K
a ft930415_2053_0240G202570H.fits 40K
a ft930415_2053_0240G202670H.fits 43K
a ft930415_2053_0240G203170M.fits 40K
a ft930415_2053_0240G203270M.fits 40K
a ft930415_2053_0240G203370M.fits 40K
a ft930415_2053_0240G203470H.fits 40K
a ft930415_2053_0240G203570H.fits 40K
a ft930415_2053_0240G203670H.fits 40K
a ft930415_2053_0240G204670M.fits 40K
a ft930415_2053_0240G204770M.fits 40K
a ft930415_2053_0240G204870H.fits 40K
a ft930415_2053_0240G204970H.fits 40K
a ft930415_2053_0240G205070H.fits 40K
a ft930415_2053_0240G300270M.fits 40K
a ft930415_2053_0240G300370M.fits 40K
a ft930415_2053_0240G300470H.fits 40K
a ft930415_2053_0240G300570H.fits 40K
a ft930415_2053_0240G300670H.fits 40K
a ft930415_2053_0240G301570H.fits 40K
a ft930415_2053_0240G301670H.fits 40K
a ft930415_2053_0240G301770H.fits 40K
a ft930415_2053_0240G302170H.fits 40K
a ft930415_2053_0240G302270H.fits 40K
a ft930415_2053_0240G302570H.fits 40K
a ft930415_2053_0240G302670H.fits 40K
a ft930415_2053_0240G303270M.fits 40K
a ft930415_2053_0240G303370M.fits 40K
a ft930415_2053_0240G303470H.fits 40K
a ft930415_2053_0240G303570H.fits 40K
a ft930415_2053_0240G303670H.fits 40K
a ft930415_2053_0240G304670M.fits 40K
a ft930415_2053_0240G304770M.fits 40K
a ft930415_2053_0240G304870H.fits 40K
a ft930415_2053_0240G304970H.fits 40K
a ft930415_2053_0240G305070H.fits 40K
a ft930415_2053_0240S000601H.fits 48K
a ft930415_2053_0240S001601H.fits 48K
a ft930415_2053_0240S002302H.fits 45K
a ft930415_2053_0240S002602M.fits 51K
a ft930415_2053_0240S100601H.fits 43K
a ft930415_2053_0240S101601H.fits 43K
a ft930415_2053_0240S102302H.fits 45K
a ft930415_2053_0240S102602M.fits 48K

-> Checking OBJECT keywords in HK and event files

Converting FAINT mode files to BRIGHT and BRIGHT2 modes ( 20:38:48 )

-> Split threshold for SIS0=40, and SIS1=40
-> Fetching faintdfe.tbl
-> Calculating DFE values for ad10012000s000101h.unf with zerodef=1
-> Converting ad10012000s000101h.unf to ad10012000s000112h.unf
-> Calculating DFE values for ad10012000s000101h.unf with zerodef=2
-> Converting ad10012000s000101h.unf to ad10012000s000102h.unf
-> Generating corner pixel histogram ad10012000s000102h_0.cnr
-> Generating corner pixel histogram ad10012000s000102h_1.cnr
-> Generating corner pixel histogram ad10012000s000102h_2.cnr
-> Generating corner pixel histogram ad10012000s000102h_3.cnr
-> Calculating DFE values for ad10012000s000301m.unf with zerodef=1
-> Converting ad10012000s000301m.unf to ad10012000s000312m.unf
-> Calculating DFE values for ad10012000s000301m.unf with zerodef=2
-> Converting ad10012000s000301m.unf to ad10012000s000302m.unf
-> Generating corner pixel histogram ad10012000s000302m_0.cnr
-> Generating corner pixel histogram ad10012000s000302m_1.cnr
-> Generating corner pixel histogram ad10012000s000302m_2.cnr
-> Generating corner pixel histogram ad10012000s000302m_3.cnr
-> Calculating DFE values for ad10012000s000401h.unf with zerodef=1
-> Converting ad10012000s000401h.unf to ad10012000s000412h.unf
-> Calculating DFE values for ad10012000s000401h.unf with zerodef=2
-> Converting ad10012000s000401h.unf to ad10012000s000402h.unf
-> Generating corner pixel histogram ad10012000s000402h_0.cnr
-> Generating corner pixel histogram ad10012000s000402h_1.cnr
-> Generating corner pixel histogram ad10012000s000402h_2.cnr
-> Generating corner pixel histogram ad10012000s000402h_3.cnr
-> Calculating DFE values for ad10012000s100101h.unf with zerodef=1
-> Converting ad10012000s100101h.unf to ad10012000s100112h.unf
-> Calculating DFE values for ad10012000s100101h.unf with zerodef=2
-> Converting ad10012000s100101h.unf to ad10012000s100102h.unf
-> Generating corner pixel histogram ad10012000s100102h_0.cnr
-> Generating corner pixel histogram ad10012000s100102h_1.cnr
-> Generating corner pixel histogram ad10012000s100102h_2.cnr
-> Generating corner pixel histogram ad10012000s100102h_3.cnr
-> Calculating DFE values for ad10012000s100301m.unf with zerodef=1
-> Converting ad10012000s100301m.unf to ad10012000s100312m.unf
-> Calculating DFE values for ad10012000s100301m.unf with zerodef=2
-> Converting ad10012000s100301m.unf to ad10012000s100302m.unf
-> Generating corner pixel histogram ad10012000s100302m_0.cnr
-> Generating corner pixel histogram ad10012000s100302m_1.cnr
-> Generating corner pixel histogram ad10012000s100302m_2.cnr
-> Generating corner pixel histogram ad10012000s100302m_3.cnr
-> Calculating DFE values for ad10012000s100401h.unf with zerodef=1
-> Converting ad10012000s100401h.unf to ad10012000s100412h.unf
-> Calculating DFE values for ad10012000s100401h.unf with zerodef=2
-> Converting ad10012000s100401h.unf to ad10012000s100402h.unf
-> Generating corner pixel histogram ad10012000s100402h_0.cnr
-> Generating corner pixel histogram ad10012000s100402h_1.cnr
-> Generating corner pixel histogram ad10012000s100402h_2.cnr
-> Generating corner pixel histogram ad10012000s100402h_3.cnr

Creating GIS gain history file ( 20:56:46 )

-> Fetching gis_temp2gain.fits
-> Fetching leapsec.fits
-> Creating gain history file ft930415_2053_0240.ghf
-> Output from ISAS program temp2gain

temp2gain v4.2
opening ft930415_2053.0240
'ft930415_2053.0240' is successfully opened
Data Start Time is 9060826.20 (930415 205346)
Time Margin 2.0 sec included
'ft930415_2053.0240' EOF detected, sf=7216
Data End Time is 9081602.13 (930416 024002)
Gain History is written in ft930415_2053_0240.ghf

-> Checking if column CAL_START in ft930415_2053_0240.ghf[1] is in order
-> Standard Output From FTOOL cktime:

 
Time column is TIME ORDERED

-> Checking if column CAL_STOP in ft930415_2053_0240.ghf[1] is in order
-> Standard Output From FTOOL cktime:

 
Time column is TIME ORDERED

-> Creating gain history file ft930416_0239_0325.ghf
-> Output from ISAS program temp2gain

temp2gain v4.2
opening ft930416_0239.0325
'ft930416_0239.0325' is successfully opened
Data Start Time is 9081600.13 (930416 024000)
Time Margin 2.0 sec included
'ft930416_0239.0325' EOF detected, sf=615
Data End Time is 9084302.12 (930416 032502)
Gain History is written in ft930416_0239_0325.ghf

-> Checking if column CAL_START in ft930416_0239_0325.ghf[1] is in order
-> Standard Output From FTOOL cktime:

 
Time column is TIME ORDERED

-> Checking if column CAL_STOP in ft930416_0239_0325.ghf[1] is in order
-> Standard Output From FTOOL cktime:

 
Time column is TIME ORDERED

Running ASCALIN on unfiltered event files ( 20:58:34 )

-> Checking if ad10012000g200170h.unf is covered by attitude file
-> Running ascalin on ad10012000g200170h.unf
-> Fetching gis2_ano_on_flf_180295.fits
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

-> Checking if ad10012000g200270h.unf is covered by attitude file
-> Running ascalin on ad10012000g200270h.unf
-> gis2_ano_on_flf_180295.fits already present in current directory
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

-> Checking if ad10012000g200370m.unf is covered by attitude file
-> Running ascalin on ad10012000g200370m.unf
-> gis2_ano_on_flf_180295.fits already present in current directory
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

-> Checking if ad10012000g300170h.unf is covered by attitude file
-> Running ascalin on ad10012000g300170h.unf
-> Fetching gis3_ano_on_flf_180295.fits
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

-> Checking if ad10012000g300270h.unf is covered by attitude file
-> Running ascalin on ad10012000g300270h.unf
-> gis3_ano_on_flf_180295.fits already present in current directory
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

-> Checking if ad10012000g300370m.unf is covered by attitude file
-> Running ascalin on ad10012000g300370m.unf
-> gis3_ano_on_flf_180295.fits already present in current directory
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

-> Checking if ad10012000s000101h.unf is covered by attitude file
-> Running ascalin on ad10012000s000101h.unf
-> Fetching sisph2pi_110397.fits
-> Fetching s0_teldef_ascalin.fits
-> Sorting ad10012000s000101h.unf
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

-> Checking if ad10012000s000102h.unf is covered by attitude file
-> Running ascalin on ad10012000s000102h.unf
-> sisph2pi_110397.fits already present in current directory
-> s0_teldef_ascalin.fits already present in current directory
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

-> Checking if ad10012000s000112h.unf is covered by attitude file
-> Running ascalin on ad10012000s000112h.unf
-> sisph2pi_110397.fits already present in current directory
-> s0_teldef_ascalin.fits already present in current directory
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

-> Checking if ad10012000s000202h.unf is covered by attitude file
-> Running ascalin on ad10012000s000202h.unf
-> sisph2pi_110397.fits already present in current directory
-> s0_teldef_ascalin.fits already present in current directory
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

-> Checking if ad10012000s000301m.unf is covered by attitude file
-> Running ascalin on ad10012000s000301m.unf
-> sisph2pi_110397.fits already present in current directory
-> s0_teldef_ascalin.fits already present in current directory
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

-> Checking if ad10012000s000302m.unf is covered by attitude file
-> Running ascalin on ad10012000s000302m.unf
-> sisph2pi_110397.fits already present in current directory
-> s0_teldef_ascalin.fits already present in current directory
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

-> Checking if ad10012000s000312m.unf is covered by attitude file
-> Running ascalin on ad10012000s000312m.unf
-> sisph2pi_110397.fits already present in current directory
-> s0_teldef_ascalin.fits already present in current directory
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

-> Checking if ad10012000s000401h.unf is covered by attitude file
-> Running ascalin on ad10012000s000401h.unf
-> sisph2pi_110397.fits already present in current directory
-> s0_teldef_ascalin.fits already present in current directory
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

-> Checking if ad10012000s000402h.unf is covered by attitude file
-> Running ascalin on ad10012000s000402h.unf
-> sisph2pi_110397.fits already present in current directory
-> s0_teldef_ascalin.fits already present in current directory
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

-> Checking if ad10012000s000412h.unf is covered by attitude file
-> Running ascalin on ad10012000s000412h.unf
-> sisph2pi_110397.fits already present in current directory
-> s0_teldef_ascalin.fits already present in current directory
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

-> Checking if ad10012000s000502m.unf is covered by attitude file
-> Running ascalin on ad10012000s000502m.unf
-> sisph2pi_110397.fits already present in current directory
-> s0_teldef_ascalin.fits already present in current directory
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

-> Checking if ad10012000s100101h.unf is covered by attitude file
-> Running ascalin on ad10012000s100101h.unf
-> sisph2pi_110397.fits already present in current directory
-> Fetching s1_teldef_ascalin.fits
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

-> Checking if ad10012000s100102h.unf is covered by attitude file
-> Running ascalin on ad10012000s100102h.unf
-> sisph2pi_110397.fits already present in current directory
-> s1_teldef_ascalin.fits already present in current directory
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

-> Checking if ad10012000s100112h.unf is covered by attitude file
-> Running ascalin on ad10012000s100112h.unf
-> sisph2pi_110397.fits already present in current directory
-> s1_teldef_ascalin.fits already present in current directory
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

-> Checking if ad10012000s100202h.unf is covered by attitude file
-> Running ascalin on ad10012000s100202h.unf
-> sisph2pi_110397.fits already present in current directory
-> s1_teldef_ascalin.fits already present in current directory
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

-> Checking if ad10012000s100301m.unf is covered by attitude file
-> Running ascalin on ad10012000s100301m.unf
-> sisph2pi_110397.fits already present in current directory
-> s1_teldef_ascalin.fits already present in current directory
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

-> Checking if ad10012000s100302m.unf is covered by attitude file
-> Running ascalin on ad10012000s100302m.unf
-> sisph2pi_110397.fits already present in current directory
-> s1_teldef_ascalin.fits already present in current directory
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

-> Checking if ad10012000s100312m.unf is covered by attitude file
-> Running ascalin on ad10012000s100312m.unf
-> sisph2pi_110397.fits already present in current directory
-> s1_teldef_ascalin.fits already present in current directory
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

-> Checking if ad10012000s100401h.unf is covered by attitude file
-> Running ascalin on ad10012000s100401h.unf
-> sisph2pi_110397.fits already present in current directory
-> s1_teldef_ascalin.fits already present in current directory
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

-> Checking if ad10012000s100402h.unf is covered by attitude file
-> Running ascalin on ad10012000s100402h.unf
-> sisph2pi_110397.fits already present in current directory
-> s1_teldef_ascalin.fits already present in current directory
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

-> Checking if ad10012000s100412h.unf is covered by attitude file
-> Running ascalin on ad10012000s100412h.unf
-> sisph2pi_110397.fits already present in current directory
-> s1_teldef_ascalin.fits already present in current directory
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

-> Checking if ad10012000s100502m.unf is covered by attitude file
-> Running ascalin on ad10012000s100502m.unf
-> sisph2pi_110397.fits already present in current directory
-> s1_teldef_ascalin.fits already present in current directory
-> Standard Output From FTOOL ascalin:

ASCALIN_V0.9t

Creating filter files ( 21:27:23 )

-> Fetching rigidity.data.1.23
-> leapsec.fits already present in current directory
-> Making filter file ft930415_2053_0240.mkf
-> Standard Output From FTOOL mkfilter2:

Date and time are: 93/ 4/15 20:53  mjd=49092.870139 
Orbit file name is ./frf.orbit.201
Epoch of Orbital Elements: 1993/4/13 0:0:0
Rigidity Data File: ./rigidity.data.1.23
Attitude FRF: fa930415_2053.0240
S0-HK file: ft930415_2053_0240S0HK.fits
S1-HK file: ft930415_2053_0240S1HK.fits
G2-HK file: ft930415_2053_0240G2HK.fits
G3-HK file: ft930415_2053_0240G3HK.fits
output FITS File: ft930415_2053_0240.mkf
Total 650 Data bins were processed.

-> Checking if column TIME in ft930415_2053_0240.mkf is in order
-> Standard Output From FTOOL cktime:

 
Time column is TIME ORDERED

-> Calculating dead time values for filter file
-> Putting dark frame errors into filter files
-> Plotting quantities from ft930415_2053_0240.mkf
-> rigidity.data.1.23 already present in current directory
-> leapsec.fits already present in current directory
-> Making filter file ft930416_0239_0325.mkf
-> Standard Output From FTOOL mkfilter2:

Date and time are: 93/ 4/16  2:39  mjd=49093.110417 
Orbit file name is ./frf.orbit.201
Epoch of Orbital Elements: 1993/4/13 0:0:0
Rigidity Data File: ./rigidity.data.1.23
Attitude FRF: fa930416_0239.0325
S0-HK file: ft930416_0239_0325S0HK.fits
S1-HK file: ft930416_0239_0325S1HK.fits
G2-HK file: ft930416_0239_0325G2HK.fits
G3-HK file: ft930416_0239_0325G3HK.fits
output FITS File: ft930416_0239_0325.mkf
Total 85 Data bins were processed.

-> Checking if column TIME in ft930416_0239_0325.mkf is in order
-> Standard Output From FTOOL cktime:

 
Time column is TIME ORDERED

-> Calculating dead time values for filter file
-> Putting dark frame errors into filter files
-> Plotting quantities from ft930416_0239_0325.mkf

Cleaning and filtering the unfiltered event files ( 21:38:14 )

-> Skipping ad10012000s000101h.unf because of mode
-> Filtering ad10012000s000102h.unf into ad10012000s000102h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   3207.4699
 The mean of the selected column is                  29.976354
 The standard deviation of the selected column is    59.722888
 The minimum of selected column is                   12.468795
 The maximum of selected column is                   636.75232
 The number of points used in calculation is              107

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   3309.0536
 The mean of the selected column is                  44.120714
 The standard deviation of the selected column is    75.743119
 The minimum of selected column is                   21.250076
 The maximum of selected column is                   685.25250
 The number of points used in calculation is               75

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   3166.7510
 The mean of the selected column is                  31.046578
 The standard deviation of the selected column is    61.929271
 The minimum of selected column is                   11.343791
 The maximum of selected column is                   642.75232
 The number of points used in calculation is              102

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL0>0.0 && S0_PIXL0<209.1 )&&
(S0_PIXL1>0)&&
(S0_PIXL2>0.0 && S0_PIXL2<271.3 )&&
(S0_PIXL3>0.0 && S0_PIXL3<216.8 )  )
&&(  (S0_SATF0<1)
   ||(S0_SATF0>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF2<1)
   ||(S0_SATF2>1))
&&(  (S0_SATF3<1)
   ||(S0_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.83E+04   139029 1111
 
Processing file: /data/data24/seq_proc/10012000.007/ad10012000s000102h.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
         133438       301              0    133137         0         0
 Writing events file
    301 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        133438       301              0    133137         0         0
   in      13.93 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data24/seq_proc/10012000.007/screen_in_event.xsl
    reading data file: /data/data24/seq_proc/10012000.007/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 File NEVENTS keyword value  :          301
 Total counts in chip images :          300
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :               0           0
cleaning chip #           1
cleaning chip #           2
 Hot pixels & counts                   :               0           0
cleaning chip #           3
 Hot pixels & counts                   :               0           0
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :          300
 Number of image cts rejected (N, %) :            0      0.0000000
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :            98            0          157           45
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :            99            0          157           45
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :          301
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!screen:ASCA > read events ad10012000s000102h.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad10012000s000102h.evt use_events=no
 Wrote cleaned events file to ad10012000s000102h.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no

-> Filtering ad10012000s000112h.unf into ad10012000s000112h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   3207.4699
 The mean of the selected column is                  29.976354
 The standard deviation of the selected column is    59.722888
 The minimum of selected column is                   12.468795
 The maximum of selected column is                   636.75232
 The number of points used in calculation is              107

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   3309.0536
 The mean of the selected column is                  44.120714
 The standard deviation of the selected column is    75.743119
 The minimum of selected column is                   21.250076
 The maximum of selected column is                   685.25250
 The number of points used in calculation is               75

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   3166.7510
 The mean of the selected column is                  31.046578
 The standard deviation of the selected column is    61.929271
 The minimum of selected column is                   11.343791
 The maximum of selected column is                   642.75232
 The number of points used in calculation is              102

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL0>0.0 && S0_PIXL0<209.1 )&&
(S0_PIXL1>0)&&
(S0_PIXL2>0.0 && S0_PIXL2<271.3 )&&
(S0_PIXL3>0.0 && S0_PIXL3<216.8 )  )
&&(  (S0_SATF0<1)
   ||(S0_SATF0>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF2<1)
   ||(S0_SATF2>1))
&&(  (S0_SATF3<1)
   ||(S0_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT2  HIGH     15/04/93 21:03:28 0.83E+04   149210 1111
 
Processing file: /data/data24/seq_proc/10012000.007/ad10012000s000112h.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
         134166       303              0    133863         0         0
 Writing events file
    303 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        134166       303              0    133863         0         0
   in      13.93 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data24/seq_proc/10012000.007/screen_in_event.xsl
    reading data file: /data/data24/seq_proc/10012000.007/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :          303
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :               0           0
cleaning chip #           1
cleaning chip #           2
 Hot pixels & counts                   :               0           0
cleaning chip #           3
 Hot pixels & counts                   :               0           0
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :          303
 Number of image cts rejected (N, %) :            0      0.0000000
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :            99            0          159           45
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :            99            0          159           45
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :          303
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!screen:ASCA > read events ad10012000s000112h.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!screen:ASCA-SIS0-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT2 > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS0-BRIGHT2 > extract events
!screen:ASCA-SIS0-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT2 > save clean outfile=ad10012000s000112h.evt use_events=no
 Wrote cleaned events file to ad10012000s000112h.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Filtering ad10012000s000202h.unf into ad10012000s000202h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   1817.6316
 The mean of the selected column is                  25.244883
 The standard deviation of the selected column is    9.5134832
 The minimum of selected column is                   11.406291
 The maximum of selected column is                   75.437782
 The number of points used in calculation is               72

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   2979.6669
 The mean of the selected column is                  41.384263
 The standard deviation of the selected column is    7.6239081
 The minimum of selected column is                   28.500103
 The maximum of selected column is                   75.593994
 The number of points used in calculation is               72

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   5400.5196
 The mean of the selected column is                  75.007217
 The standard deviation of the selected column is    162.40853
 The minimum of selected column is                   18.343817
 The maximum of selected column is                   1086.2540
 The number of points used in calculation is               72

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   3425.7313
 The mean of the selected column is                  47.579601
 The standard deviation of the selected column is    154.42468
 The minimum of selected column is                   8.6875315
 The maximum of selected column is                   1252.5671
 The number of points used in calculation is               72

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL0>0.0 && S0_PIXL0<53.7 )&&
(S0_PIXL1>18.5 && S0_PIXL1<64.2 )&&
(S0_PIXL2>0.0 && S0_PIXL2<562.2 )&&
(S0_PIXL3>0.0 && S0_PIXL3<510.8 )  )
&&(  (S0_SATF0<1)
   ||(S0_SATF0>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF2<1)
   ||(S0_SATF2>1))
&&(  (S0_SATF3<1)
   ||(S0_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT   HIGH     16/04/93 00:49:08 0.42E+04    91545 1111
 
Processing file: /data/data24/seq_proc/10012000.007/ad10012000s000202h.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          87210     79580              0      7630         0         0
 Writing events file
  79580 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         87210     79580              0      7630         0         0
   in    2176.00 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data24/seq_proc/10012000.007/screen_in_event.xsl
    reading data file: /data/data24/seq_proc/10012000.007/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        79580
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              66        8261
 Flickering pixels iter, pixels & cnts :   1          28         573
cleaning chip #           1
 Hot pixels & counts                   :               9        1156
 Flickering pixels iter, pixels & cnts :   1          39         799
cleaning chip #           2
 Hot pixels & counts                   :               8         811
 Flickering pixels iter, pixels & cnts :   1          72         908
cleaning chip #           3
 Hot pixels & counts                   :              12        1119
 Flickering pixels iter, pixels & cnts :   1          24         187
 
 Number of pixels rejected           :          258
 Number of (internal) image counts   :        79580
 Number of image cts rejected (N, %) :        13814     17.3586330
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            94           48           80           36
 
 Image counts      :         15396        34971        22325         6888
 Image cts rejected:          8834         1955         1719         1306
 Image cts rej (%) :         57.38         5.59         7.70        18.96
 
    filtering data...
 
 Total counts      :         15396        34971        22325         6888
 Total cts rejected:          8834         1955         1719         1306
 Total cts rej (%) :         57.38         5.59         7.70        18.96
 
 Number of clean counts accepted  :        65766
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          258
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!screen:ASCA > read events ad10012000s000202h.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad10012000s000202h.evt use_events=no
 Wrote cleaned events file to ad10012000s000202h.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no

-> Skipping ad10012000s000301m.unf because of mode
-> Filtering ad10012000s000302m.unf into ad10012000s000302m.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL0>0)&&
(S0_PIXL1>0)&&
(S0_PIXL2>0)&&
(S0_PIXL3>0)  )
&&(  (S0_SATF0<1)
   ||(S0_SATF0>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF2<1)
   ||(S0_SATF2>1))
&&(  (S0_SATF3<1)
   ||(S0_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT   MEDIUM   15/04/93 20:55:44 0.65E+03     2412 1111
 
Processing file: /data/data24/seq_proc/10012000.007/ad10012000s000302m.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data24/seq_proc/10012000.007/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data24/seq_proc/10012000.007/screen_in_event.xsl
    reading data file: /data/data24/seq_proc/10012000.007/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip #           0
cleaning chip #           1
cleaning chip #           2
cleaning chip #           3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0      0.0000000
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!screen:ASCA > read events ad10012000s000302m.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad10012000s000302m.evt use_events=no
 Wrote cleaned events file to ad10012000s000302m.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no

-> Deleting ad10012000s000302m.evt since it contains 0 events
-> Filtering ad10012000s000312m.unf into ad10012000s000312m.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL0>0)&&
(S0_PIXL1>0)&&
(S0_PIXL2>0)&&
(S0_PIXL3>0)  )
&&(  (S0_SATF0<1)
   ||(S0_SATF0>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF2<1)
   ||(S0_SATF2>1))
&&(  (S0_SATF3<1)
   ||(S0_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT2  MEDIUM   15/04/93 20:55:44 0.65E+03     2578 1111
 
Processing file: /data/data24/seq_proc/10012000.007/ad10012000s000312m.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data24/seq_proc/10012000.007/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data24/seq_proc/10012000.007/screen_in_event.xsl
    reading data file: /data/data24/seq_proc/10012000.007/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip #           0
cleaning chip #           1
cleaning chip #           2
cleaning chip #           3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0      0.0000000
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!screen:ASCA > read events ad10012000s000312m.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!screen:ASCA-SIS0-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT2 > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS0-BRIGHT2 > extract events
!screen:ASCA-SIS0-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT2 > save clean outfile=ad10012000s000312m.evt use_events=no
 Wrote cleaned events file to ad10012000s000312m.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Deleting ad10012000s000312m.evt since it contains 0 events
-> Skipping ad10012000s000401h.unf because of mode
-> Filtering ad10012000s000402h.unf into ad10012000s000402h.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL0>0)&&
(S0_PIXL1>0)&&
(S0_PIXL2>0)&&
(S0_PIXL3>0)  )
&&(  (S0_SATF0<1)
   ||(S0_SATF0>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF2<1)
   ||(S0_SATF2>1))
&&(  (S0_SATF3<1)
   ||(S0_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT   HIGH     16/04/93 02:39:52 0.10E+04    36050 1111
 
Processing file: /data/data24/seq_proc/10012000.007/ad10012000s000402h.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data24/seq_proc/10012000.007/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data24/seq_proc/10012000.007/screen_in_event.xsl
    reading data file: /data/data24/seq_proc/10012000.007/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip #           0
cleaning chip #           1
cleaning chip #           2
cleaning chip #           3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0      0.0000000
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!screen:ASCA > read events ad10012000s000402h.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad10012000s000402h.evt use_events=no
 Wrote cleaned events file to ad10012000s000402h.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no

-> Deleting ad10012000s000402h.evt since it contains 0 events
-> Filtering ad10012000s000412h.unf into ad10012000s000412h.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL0>0)&&
(S0_PIXL1>0)&&
(S0_PIXL2>0)&&
(S0_PIXL3>0)  )
&&(  (S0_SATF0<1)
   ||(S0_SATF0>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF2<1)
   ||(S0_SATF2>1))
&&(  (S0_SATF3<1)
   ||(S0_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT2  HIGH     16/04/93 02:39:52 0.10E+04    38131 1111
 
Processing file: /data/data24/seq_proc/10012000.007/ad10012000s000412h.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data24/seq_proc/10012000.007/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data24/seq_proc/10012000.007/screen_in_event.xsl
    reading data file: /data/data24/seq_proc/10012000.007/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip #           0
cleaning chip #           1
cleaning chip #           2
cleaning chip #           3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0      0.0000000
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!screen:ASCA > read events ad10012000s000412h.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!screen:ASCA-SIS0-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT2 > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS0-BRIGHT2 > extract events
!screen:ASCA-SIS0-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT2 > save clean outfile=ad10012000s000412h.evt use_events=no
 Wrote cleaned events file to ad10012000s000412h.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Deleting ad10012000s000412h.evt since it contains 0 events
-> Filtering ad10012000s000502m.unf into ad10012000s000502m.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL0>0)&&
(S0_PIXL1>0)&&
(S0_PIXL2>0)&&
(S0_PIXL3>0)  )
&&(  (S0_SATF0<1)
   ||(S0_SATF0>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF2<1)
   ||(S0_SATF2>1))
&&(  (S0_SATF3<1)
   ||(S0_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT   MEDIUM   16/04/93 02:57:32 0.60E+03    13174 1111
 
Processing file: /data/data24/seq_proc/10012000.007/ad10012000s000502m.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data24/seq_proc/10012000.007/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data24/seq_proc/10012000.007/screen_in_event.xsl
    reading data file: /data/data24/seq_proc/10012000.007/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip #           0
cleaning chip #           1
cleaning chip #           2
cleaning chip #           3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0      0.0000000
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!screen:ASCA > read events ad10012000s000502m.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad10012000s000502m.evt use_events=no
 Wrote cleaned events file to ad10012000s000502m.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no

-> Deleting ad10012000s000502m.evt since it contains 0 events
-> Skipping ad10012000s100101h.unf because of mode
-> Filtering ad10012000s100102h.unf into ad10012000s100102h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   3641.1968
 The mean of the selected column is                  34.029877
 The standard deviation of the selected column is    13.314320
 The minimum of selected column is                   11.854209
 The maximum of selected column is                   89.531578
 The number of points used in calculation is              107

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   3572.7739
 The mean of the selected column is                  33.390410
 The standard deviation of the selected column is    9.9007997
 The minimum of selected column is                   11.395875
 The maximum of selected column is                   81.437798
 The number of points used in calculation is              107

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   3728.3085
 The mean of the selected column is                  34.844004
 The standard deviation of the selected column is    10.821760
 The minimum of selected column is                   16.625061
 The maximum of selected column is                   73.844017
 The number of points used in calculation is              107

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   4579.8044
 The mean of the selected column is                  43.617185
 The standard deviation of the selected column is    14.115662
 The minimum of selected column is                   11.875043
 The maximum of selected column is                   145.31302
 The number of points used in calculation is              105

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL0>0.0 && S1_PIXL0<73.9 )&&
(S1_PIXL1>3.6 && S1_PIXL1<63 )&&
(S1_PIXL2>2.3 && S1_PIXL2<67.3 )&&
(S1_PIXL3>1.2 && S1_PIXL3<85.9 )  )
&&(  (S1_SATF0<1)
   ||(S1_SATF0>1))
&&(  (S1_SATF1<1)
   ||(S1_SATF1>1))
&&(  (S1_SATF2<1)
   ||(S1_SATF2>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.83E+04   154188 1111
 
Processing file: /data/data24/seq_proc/10012000.007/ad10012000s100102h.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
         146165     97393              0     48772         0         0
 Writing events file
  97393 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        146165     97393              0     48772         0         0
   in    3169.94 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data24/seq_proc/10012000.007/screen_in_event.xsl
    reading data file: /data/data24/seq_proc/10012000.007/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        97393
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              20        2703
 Flickering pixels iter, pixels & cnts :   1          40         604
cleaning chip #           1
 Hot pixels & counts                   :              23        4284
 Flickering pixels iter, pixels & cnts :   1          37         561
cleaning chip #           2
 Hot pixels & counts                   :              21        3739
 Flickering pixels iter, pixels & cnts :   1          33         448
cleaning chip #           3
 Hot pixels & counts                   :              14        2418
 Flickering pixels iter, pixels & cnts :   1          39         752
 
 Number of pixels rejected           :          227
 Number of (internal) image counts   :        97393
 Number of image cts rejected (N, %) :        15509     15.9241428
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            60           60           54           53
 
 Image counts      :         17765        20485        26944        32199
 Image cts rejected:          3307         4845         4187         3170
 Image cts rej (%) :         18.62        23.65        15.54         9.85
 
    filtering data...
 
 Total counts      :         17765        20485        26944        32199
 Total cts rejected:          3307         4845         4187         3170
 Total cts rej (%) :         18.62        23.65        15.54         9.85
 
 Number of clean counts accepted  :        81884
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          227
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!screen:ASCA > read events ad10012000s100102h.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad10012000s100102h.evt use_events=no
 Wrote cleaned events file to ad10012000s100102h.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no

-> Filtering ad10012000s100112h.unf into ad10012000s100112h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   3641.1968
 The mean of the selected column is                  34.029877
 The standard deviation of the selected column is    13.314320
 The minimum of selected column is                   11.854209
 The maximum of selected column is                   89.531578
 The number of points used in calculation is              107

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   3572.7739
 The mean of the selected column is                  33.390410
 The standard deviation of the selected column is    9.9007997
 The minimum of selected column is                   11.395875
 The maximum of selected column is                   81.437798
 The number of points used in calculation is              107

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   3728.3085
 The mean of the selected column is                  34.844004
 The standard deviation of the selected column is    10.821760
 The minimum of selected column is                   16.625061
 The maximum of selected column is                   73.844017
 The number of points used in calculation is              107

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   4579.8044
 The mean of the selected column is                  43.617185
 The standard deviation of the selected column is    14.115662
 The minimum of selected column is                   11.875043
 The maximum of selected column is                   145.31302
 The number of points used in calculation is              105

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL0>0.0 && S1_PIXL0<73.9 )&&
(S1_PIXL1>3.6 && S1_PIXL1<63 )&&
(S1_PIXL2>2.3 && S1_PIXL2<67.3 )&&
(S1_PIXL3>1.2 && S1_PIXL3<85.9 )  )
&&(  (S1_SATF0<1)
   ||(S1_SATF0>1))
&&(  (S1_SATF1<1)
   ||(S1_SATF1>1))
&&(  (S1_SATF2<1)
   ||(S1_SATF2>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT2  HIGH     15/04/93 21:03:28 0.83E+04   164889 1111
 
Processing file: /data/data24/seq_proc/10012000.007/ad10012000s100112h.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
         146763     97800              0     48963         0         0
 Writing events file
  97800 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        146763     97800              0     48963         0         0
   in    3169.94 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data24/seq_proc/10012000.007/screen_in_event.xsl
    reading data file: /data/data24/seq_proc/10012000.007/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        97800
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              20        2704
 Flickering pixels iter, pixels & cnts :   1          40         604
cleaning chip #           1
 Hot pixels & counts                   :              23        4287
 Flickering pixels iter, pixels & cnts :   1          37         562
cleaning chip #           2
 Hot pixels & counts                   :              21        3742
 Flickering pixels iter, pixels & cnts :   1          33         448
cleaning chip #           3
 Hot pixels & counts                   :              14        2424
 Flickering pixels iter, pixels & cnts :   1          39         756
 
 Number of pixels rejected           :          227
 Number of (internal) image counts   :        97800
 Number of image cts rejected (N, %) :        15527     15.8762779
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            60           60           54           53
 
 Image counts      :         17858        20587        27022        32333
 Image cts rejected:          3308         4849         4190         3180
 Image cts rej (%) :         18.52        23.55        15.51         9.84
 
    filtering data...
 
 Total counts      :         17858        20587        27022        32333
 Total cts rejected:          3308         4849         4190         3180
 Total cts rej (%) :         18.52        23.55        15.51         9.84
 
 Number of clean counts accepted  :        82273
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          227
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!screen:ASCA > read events ad10012000s100112h.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS1-BRIGHT2 > extract events
!screen:ASCA-SIS1-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT2 > save clean outfile=ad10012000s100112h.evt use_events=no
 Wrote cleaned events file to ad10012000s100112h.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Filtering ad10012000s100202h.unf into ad10012000s100202h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   2319.0083
 The mean of the selected column is                  32.208449
 The standard deviation of the selected column is    11.746790
 The minimum of selected column is                   16.093809
 The maximum of selected column is                   91.625328
 The number of points used in calculation is               72

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   2451.5713
 The mean of the selected column is                  34.049602
 The standard deviation of the selected column is    10.889574
 The minimum of selected column is                   16.312559
 The maximum of selected column is                   62.125221
 The number of points used in calculation is               72

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   2518.8736
 The mean of the selected column is                  34.984356
 The standard deviation of the selected column is    11.834812
 The minimum of selected column is                   17.645897
 The maximum of selected column is                   70.562752
 The number of points used in calculation is               72

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   3122.3216
 The mean of the selected column is                  43.365578
 The standard deviation of the selected column is    14.348808
 The minimum of selected column is                   25.156342
 The maximum of selected column is                   117.03167
 The number of points used in calculation is               72

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL0>0.0 && S1_PIXL0<67.4 )&&
(S1_PIXL1>1.3 && S1_PIXL1<66.7 )&&
(S1_PIXL2>0.0 && S1_PIXL2<70.4 )&&
(S1_PIXL3>0.3 && S1_PIXL3<86.4 )  )
&&(  (S1_SATF0<1)
   ||(S1_SATF0>1))
&&(  (S1_SATF1<1)
   ||(S1_SATF1>1))
&&(  (S1_SATF2<1)
   ||(S1_SATF2>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT   HIGH     16/04/93 00:49:52 0.42E+04    96854 1111
 
Processing file: /data/data24/seq_proc/10012000.007/ad10012000s100202h.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          91080     68437              0     22643         0         0
 Writing events file
  68437 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         91080     68437              0     22643         0         0
   in    2201.97 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data24/seq_proc/10012000.007/screen_in_event.xsl
    reading data file: /data/data24/seq_proc/10012000.007/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        68437
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              19        1824
 Flickering pixels iter, pixels & cnts :   1          35         526
cleaning chip #           1
 Hot pixels & counts                   :              24        3119
 Flickering pixels iter, pixels & cnts :   1          28         395
cleaning chip #           2
 Hot pixels & counts                   :              21        2635
 Flickering pixels iter, pixels & cnts :   1          33         331
cleaning chip #           3
 Hot pixels & counts                   :              14        1766
 Flickering pixels iter, pixels & cnts :   1          35         638
 
 Number of pixels rejected           :          209
 Number of (internal) image counts   :        68437
 Number of image cts rejected (N, %) :        11234     16.4150963
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            54           52           54           49
 
 Image counts      :         12767        14836        17783        23051
 Image cts rejected:          2350         3514         2966         2404
 Image cts rej (%) :         18.41        23.69        16.68        10.43
 
    filtering data...
 
 Total counts      :         12767        14836        17783        23051
 Total cts rejected:          2350         3514         2966         2404
 Total cts rej (%) :         18.41        23.69        16.68        10.43
 
 Number of clean counts accepted  :        57203
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          209
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!screen:ASCA > read events ad10012000s100202h.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad10012000s100202h.evt use_events=no
 Wrote cleaned events file to ad10012000s100202h.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no

-> Skipping ad10012000s100301m.unf because of mode
-> Filtering ad10012000s100302m.unf into ad10012000s100302m.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL0>0)&&
(S1_PIXL1>0)&&
(S1_PIXL2>0)&&
(S1_PIXL3>0)  )
&&(  (S1_SATF0<1)
   ||(S1_SATF0>1))
&&(  (S1_SATF1<1)
   ||(S1_SATF1>1))
&&(  (S1_SATF2<1)
   ||(S1_SATF2>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT   MEDIUM   15/04/93 20:55:44 0.65E+03     2530 1111
 
Processing file: /data/data24/seq_proc/10012000.007/ad10012000s100302m.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data24/seq_proc/10012000.007/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data24/seq_proc/10012000.007/screen_in_event.xsl
    reading data file: /data/data24/seq_proc/10012000.007/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip #           0
cleaning chip #           1
cleaning chip #           2
cleaning chip #           3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0      0.0000000
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!screen:ASCA > read events ad10012000s100302m.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad10012000s100302m.evt use_events=no
 Wrote cleaned events file to ad10012000s100302m.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no

-> Deleting ad10012000s100302m.evt since it contains 0 events
-> Filtering ad10012000s100312m.unf into ad10012000s100312m.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL0>0)&&
(S1_PIXL1>0)&&
(S1_PIXL2>0)&&
(S1_PIXL3>0)  )
&&(  (S1_SATF0<1)
   ||(S1_SATF0>1))
&&(  (S1_SATF1<1)
   ||(S1_SATF1>1))
&&(  (S1_SATF2<1)
   ||(S1_SATF2>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT2  MEDIUM   15/04/93 20:55:44 0.65E+03     2672 1111
 
Processing file: /data/data24/seq_proc/10012000.007/ad10012000s100312m.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data24/seq_proc/10012000.007/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data24/seq_proc/10012000.007/screen_in_event.xsl
    reading data file: /data/data24/seq_proc/10012000.007/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip #           0
cleaning chip #           1
cleaning chip #           2
cleaning chip #           3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0      0.0000000
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!screen:ASCA > read events ad10012000s100312m.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS1-BRIGHT2 > extract events
!screen:ASCA-SIS1-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT2 > save clean outfile=ad10012000s100312m.evt use_events=no
 Wrote cleaned events file to ad10012000s100312m.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Deleting ad10012000s100312m.evt since it contains 0 events
-> Skipping ad10012000s100401h.unf because of mode
-> Filtering ad10012000s100402h.unf into ad10012000s100402h.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL0>0)&&
(S1_PIXL1>0)&&
(S1_PIXL2>0)&&
(S1_PIXL3>0)  )
&&(  (S1_SATF0<1)
   ||(S1_SATF0>1))
&&(  (S1_SATF1<1)
   ||(S1_SATF1>1))
&&(  (S1_SATF2<1)
   ||(S1_SATF2>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT   HIGH     16/04/93 02:39:52 0.10E+04    34536 1111
 
Processing file: /data/data24/seq_proc/10012000.007/ad10012000s100402h.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          32775     28443              0      4332         0         0
 Writing events file
  28443 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         32775     28443              0      4332         0         0
   in     877.97 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data24/seq_proc/10012000.007/screen_in_event.xsl
    reading data file: /data/data24/seq_proc/10012000.007/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        28443
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              15         686
 Flickering pixels iter, pixels & cnts :   1          30         246
cleaning chip #           1
 Hot pixels & counts                   :              25        1284
 Flickering pixels iter, pixels & cnts :   1          19         150
cleaning chip #           2
 Hot pixels & counts                   :              19         993
 Flickering pixels iter, pixels & cnts :   1          20         160
cleaning chip #           3
 Hot pixels & counts                   :              12         611
 Flickering pixels iter, pixels & cnts :   1          27         430
 
 Number of pixels rejected           :          167
 Number of (internal) image counts   :        28443
 Number of image cts rejected (N, %) :         4560     16.0320644
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            45           44           39           39
 
 Image counts      :          5326         5912         7430         9775
 Image cts rejected:           932         1434         1153         1041
 Image cts rej (%) :         17.50        24.26        15.52        10.65
 
    filtering data...
 
 Total counts      :          5326         5912         7430         9775
 Total cts rejected:           932         1434         1153         1041
 Total cts rej (%) :         17.50        24.26        15.52        10.65
 
 Number of clean counts accepted  :        23883
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          167
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!screen:ASCA > read events ad10012000s100402h.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad10012000s100402h.evt use_events=no
 Wrote cleaned events file to ad10012000s100402h.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no

-> Filtering ad10012000s100412h.unf into ad10012000s100412h.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL0>0)&&
(S1_PIXL1>0)&&
(S1_PIXL2>0)&&
(S1_PIXL3>0)  )
&&(  (S1_SATF0<1)
   ||(S1_SATF0>1))
&&(  (S1_SATF1<1)
   ||(S1_SATF1>1))
&&(  (S1_SATF2<1)
   ||(S1_SATF2>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT2  HIGH     16/04/93 02:39:52 0.10E+04    36691 1111
 
Processing file: /data/data24/seq_proc/10012000.007/ad10012000s100412h.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          32872     28529              0      4343         0         0
 Writing events file
  28529 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         32872     28529              0      4343         0         0
   in     877.97 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data24/seq_proc/10012000.007/screen_in_event.xsl
    reading data file: /data/data24/seq_proc/10012000.007/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        28529
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              15         687
 Flickering pixels iter, pixels & cnts :   1          30         246
cleaning chip #           1
 Hot pixels & counts                   :              25        1284
 Flickering pixels iter, pixels & cnts :   1          19         150
cleaning chip #           2
 Hot pixels & counts                   :              19         993
 Flickering pixels iter, pixels & cnts :   1          20         160
cleaning chip #           3
 Hot pixels & counts                   :              12         613
 Flickering pixels iter, pixels & cnts :   1          27         434
 
 Number of pixels rejected           :          167
 Number of (internal) image counts   :        28529
 Number of image cts rejected (N, %) :         4567     16.0082722
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            45           44           39           39
 
 Image counts      :          5340         5923         7449         9817
 Image cts rejected:           933         1434         1153         1047
 Image cts rej (%) :         17.47        24.21        15.48        10.67
 
    filtering data...
 
 Total counts      :          5340         5923         7449         9817
 Total cts rejected:           933         1434         1153         1047
 Total cts rej (%) :         17.47        24.21        15.48        10.67
 
 Number of clean counts accepted  :        23962
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          167
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!screen:ASCA > read events ad10012000s100412h.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS1-BRIGHT2 > extract events
!screen:ASCA-SIS1-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT2 > save clean outfile=ad10012000s100412h.evt use_events=no
 Wrote cleaned events file to ad10012000s100412h.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Filtering ad10012000s100502m.unf into ad10012000s100502m.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL0>0)&&
(S1_PIXL1>0)&&
(S1_PIXL2>0)&&
(S1_PIXL3>0)  )
&&(  (S1_SATF0<1)
   ||(S1_SATF0>1))
&&(  (S1_SATF1<1)
   ||(S1_SATF1>1))
&&(  (S1_SATF2<1)
   ||(S1_SATF2>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT   MEDIUM   16/04/93 02:57:32 0.60E+03    14931 1111
 
Processing file: /data/data24/seq_proc/10012000.007/ad10012000s100502m.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data24/seq_proc/10012000.007/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data24/seq_proc/10012000.007/screen_in_event.xsl
    reading data file: /data/data24/seq_proc/10012000.007/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip #           0
cleaning chip #           1
cleaning chip #           2
cleaning chip #           3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0      0.0000000
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!screen:ASCA > read events ad10012000s100502m.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad10012000s100502m.evt use_events=no
 Wrote cleaned events file to ad10012000s100502m.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no

-> Deleting ad10012000s100502m.evt since it contains 0 events
-> Filtering ad10012000g200170h.unf into ad10012000g200170h.evt
-> Fetching GIS2_REGION256_OFF.4
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.13E+05   178048     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         178048    132314          22460     23274         0         0
 Writing events file
 132314 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        178048    132314          22460     23274         0         0
   in    5553.98 seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
      132314              131020              1294
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!screen:ASCA > read events ad10012000g200170h.unf
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256_OFF.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad10012000g200170h.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no

-> Setting NEVENTS to 131020 in ad10012000g200170h.unf
-> Filtering ad10012000g200270h.unf into ad10012000g200270h.evt
-> GIS2_REGION256_OFF.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     16/04/93 02:40:04 0.10E+04    28126     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g200270h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          28126     26270           1762        94         0         0
 Writing events file
  26270 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         28126     26270           1762        94         0         0
   in    1010.00 seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
       26270               26031               239
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!screen:ASCA > read events ad10012000g200270h.unf
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256_OFF.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad10012000g200270h.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no

-> Setting NEVENTS to 26031 in ad10012000g200270h.unf
-> Filtering ad10012000g200370m.unf into ad10012000g200370m.evt
-> GIS2_REGION256_OFF.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       MEDIUM   16/04/93 02:57:48 0.61E+03     6139     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g200370m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           6139      4503            459      1177         0         0
 Writing events file
   4503 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          6139      4503            459      1177         0         0
   in     304.00 seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
        4503                4460                43
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!screen:ASCA > read events ad10012000g200370m.unf
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256_OFF.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad10012000g200370m.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no

-> Setting NEVENTS to 4460 in ad10012000g200370m.unf
-> Filtering ad10012000g300170h.unf into ad10012000g300170h.evt
-> Fetching GIS3_REGION256_OFF.4
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.13E+05   182456     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         182456    135877          23002     23577         0         0
 Writing events file
 135877 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        182456    135877          23002     23577         0         0
   in    5553.98 seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
      135877              134746              1131
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!screen:ASCA > read events ad10012000g300170h.unf
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256_OFF.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad10012000g300170h.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no

-> Setting NEVENTS to 134746 in ad10012000g300170h.unf
-> Filtering ad10012000g300270h.unf into ad10012000g300270h.evt
-> GIS3_REGION256_OFF.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     16/04/93 02:40:04 0.10E+04    28746     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g300270h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          28746     26730           1918        98         0         0
 Writing events file
  26730 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         28746     26730           1918        98         0         0
   in    1010.00 seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
       26730               26530               200
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!screen:ASCA > read events ad10012000g300270h.unf
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256_OFF.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad10012000g300270h.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no

-> Setting NEVENTS to 26530 in ad10012000g300270h.unf
-> Filtering ad10012000g300370m.unf into ad10012000g300370m.evt
-> GIS3_REGION256_OFF.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       MEDIUM   16/04/93 02:57:48 0.61E+03     6149     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g300370m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           6149      4513            439      1197         0         0
 Writing events file
   4513 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          6149      4513            439      1197         0         0
   in     304.00 seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
        4513                4480                33
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!screen:ASCA > read events ad10012000g300370m.unf
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256_OFF.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad10012000g300370m.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no

-> Setting NEVENTS to 4480 in ad10012000g300370m.unf

Generating images and exposure maps ( 22:18:38 )

-> Generating exposure map ad10012000g200170h.expo
-> GIS2_REGION256_OFF.4 already present in current directory
-> Standard Output From STOOL regionmap:

-ANNULUS(128.5,128.5,192,81)
-ELLIPSE(167.5,220,24.66,28.95,245.298)

-> gis2_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad10012000g200170h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad10012000g200170h.evt
    reading   gti ext: STDGTI
    reading  cal file: gis2_ano_on_flf_180295.fits
    reading inst file: GIS2_REGION256_OFF.4_regionmap.tmp
 
    making an inst map...
     multiply inst map...
 
    reading att  file: ./fa930415_2053.0240
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       94.2777       9.1392      82.6880
 Mean   RA/DEC/ROLL :       94.2859       9.1586      82.6880
 Pnt    RA/DEC/ROLL :       94.2844       9.0895      82.6880
 
 Image rebin factor :             1
 Attitude Records   :         28760
 GTI intervals      :            11
 Total GTI (secs)   :      5553.985
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:        0.0000000       0.0000000
  10 Percent Complete: Total/live time:     1041.9842529    1041.9842529
  20 Percent Complete: Total/live time:     2495.9843750    2495.9843750
  30 Percent Complete: Total/live time:     2495.9843750    2495.9843750
  40 Percent Complete: Total/live time:     4799.9843750    4799.9843750
  50 Percent Complete: Total/live time:     4799.9843750    4799.9843750
  60 Percent Complete: Total/live time:     4800.4125977    4800.4125977
  70 Percent Complete: Total/live time:     4800.4125977    4800.4125977
  80 Percent Complete: Total/live time:     5553.9848633    5553.9848633
 100 Percent Complete: Total/live time:     5553.9848633    5553.9848633
 
 Number of attitude steps  used:            7
 Number of attitude steps avail:        16606
 Mean RA/DEC pixel offset:       -8.5364      -2.3809
 
    writing expo file: ad10012000g200170h.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad10012000g200170h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] ad10012000g200170h
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.56E+04   131020     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         131020    131020              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        131020    131020              0         0         0         0
   in    5553.98 seconds
 Image            has   131020 counts for  23.59     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         131020     75852              0         0         0     55168
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        131020     75852              0         0         0     55168
   in    5553.98 seconds
 Image            has    75852 counts for  13.66     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         131020     55768              0         0         0     75252
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        131020     55768              0         0         0     75252
   in    5553.98 seconds
 Image            has    55768 counts for  10.04     counts/sec
 Command not found; type ? for a command listing
!ad10012000g200170h:ASCA >
!ad10012000g200170h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!ad10012000g200170h:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!ad10012000g200170h:ASCA > read events ad10012000g200170h.evt
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!ad10012000g200170h:ASCA-GIS2-PH > set image sky
!ad10012000g200170h:ASCA-GIS2-PH > filter region corner_point.reg
!ad10012000g200170h:ASCA-GIS2-PH > extract image
!ad10012000g200170h:ASCA-GIS2-PH > save image outfile=ad10012000g200170h.img
Wrote image to file ad10012000g200170h.img
!ad10012000g200170h:ASCA-GIS2-PH > filter pha_cut 0 170
!ad10012000g200170h:ASCA-GIS2-PH > extract image
!ad10012000g200170h:ASCA-GIS2-PH > save image outfile=ad10012000g200170h_lo.img
Wrote image to file ad10012000g200170h_lo.img
!ad10012000g200170h:ASCA-GIS2-PH > clear pha_cut
!ad10012000g200170h:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad10012000g200170h:ASCA-GIS2-PH > extract image
!ad10012000g200170h:ASCA-GIS2-PH > save image outfile=ad10012000g200170h_hi.img
Wrote image to file ad10012000g200170h_hi.img
!ad10012000g200170h:ASCA-GIS2-PH > exit save_session=no

-> Generating exposure map ad10012000g200270h.expo
-> GIS2_REGION256_OFF.4 already present in current directory
-> gis2_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad10012000g200270h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad10012000g200270h.evt
    reading   gti ext: STDGTI
    reading  cal file: gis2_ano_on_flf_180295.fits
    reading inst file: GIS2_REGION256_OFF.4_regionmap.tmp
 
    making an inst map...
     multiply inst map...
 
    reading att  file: ./fa930416_0239.0325
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       94.2777       9.1392      82.6901
 Mean   RA/DEC/ROLL :       94.2912       9.1577      82.6901
 Pnt    RA/DEC/ROLL :       94.2618       9.1194      82.6901
 
 Image rebin factor :             1
 Attitude Records   :          2297
 GTI intervals      :             6
 Total GTI (secs)   :      1009.996
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:        0.0000000       0.0000000
  10 Percent Complete: Total/live time:     1009.9964600    1009.9964600
 100 Percent Complete: Total/live time:     1009.9964600    1009.9964600
 
 Number of attitude steps  used:            2
 Number of attitude steps avail:         2028
 Mean RA/DEC pixel offset:       -4.9030      -2.6498
 
    writing expo file: ad10012000g200270h.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad10012000g200270h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] ad10012000g200270h
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     16/04/93 02:40:04 0.10E+04    26031     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g200270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          26031     26031              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         26031     26031              0         0         0         0
   in    1010.00 seconds
 Image            has    26031 counts for  25.77     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g200270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          26031     15266              0         0         0     10765
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         26031     15266              0         0         0     10765
   in    1010.00 seconds
 Image            has    15266 counts for  15.11     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g200270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          26031     10861              0         0         0     15170
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         26031     10861              0         0         0     15170
   in    1010.00 seconds
 Image            has    10861 counts for  10.75     counts/sec
 Command not found; type ? for a command listing
!ad10012000g200270h:ASCA >
!ad10012000g200270h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!ad10012000g200270h:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!ad10012000g200270h:ASCA > read events ad10012000g200270h.evt
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!ad10012000g200270h:ASCA-GIS2-PH > set image sky
!ad10012000g200270h:ASCA-GIS2-PH > filter region corner_point.reg
!ad10012000g200270h:ASCA-GIS2-PH > extract image
!ad10012000g200270h:ASCA-GIS2-PH > save image outfile=ad10012000g200270h.img
Wrote image to file ad10012000g200270h.img
!ad10012000g200270h:ASCA-GIS2-PH > filter pha_cut 0 170
!ad10012000g200270h:ASCA-GIS2-PH > extract image
!ad10012000g200270h:ASCA-GIS2-PH > save image outfile=ad10012000g200270h_lo.img
Wrote image to file ad10012000g200270h_lo.img
!ad10012000g200270h:ASCA-GIS2-PH > clear pha_cut
!ad10012000g200270h:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad10012000g200270h:ASCA-GIS2-PH > extract image
!ad10012000g200270h:ASCA-GIS2-PH > save image outfile=ad10012000g200270h_hi.img
Wrote image to file ad10012000g200270h_hi.img
!ad10012000g200270h:ASCA-GIS2-PH > exit save_session=no

-> Generating exposure map ad10012000g200370m.expo
-> GIS2_REGION256_OFF.4 already present in current directory
-> gis2_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad10012000g200370m.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad10012000g200370m.evt
    reading   gti ext: STDGTI
    reading  cal file: gis2_ano_on_flf_180295.fits
    reading inst file: GIS2_REGION256_OFF.4_regionmap.tmp
 
    making an inst map...
     multiply inst map...
 
    reading att  file: ./fa930416_0239.0325
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       94.2777       9.1392      82.6899
 Mean   RA/DEC/ROLL :       94.2908       9.1576      82.6899
 Pnt    RA/DEC/ROLL :       94.2622       9.1187      82.6899
 
 Image rebin factor :             1
 Attitude Records   :          2297
 GTI intervals      :             7
 Total GTI (secs)   :       303.999
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:        0.0000000       0.0000000
  10 Percent Complete: Total/live time:      267.9993591     267.9993591
  20 Percent Complete: Total/live time:      267.9993591     267.9993591
  30 Percent Complete: Total/live time:      275.9993896     275.9993896
  40 Percent Complete: Total/live time:      275.9993896     275.9993896
  50 Percent Complete: Total/live time:      303.9992676     303.9992676
 100 Percent Complete: Total/live time:      303.9992676     303.9992676
 
 Number of attitude steps  used:            4
 Number of attitude steps avail:           84
 Mean RA/DEC pixel offset:       -7.3332      -3.7319
 
    writing expo file: ad10012000g200370m.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad10012000g200370m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] ad10012000g200370m
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       MEDIUM   16/04/93 02:57:48 0.30E+03     4460     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g200370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4460      4460              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4460      4460              0         0         0         0
   in     304.00 seconds
 Image            has     4460 counts for  14.67     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g200370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4460      2609              0         0         0      1851
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4460      2609              0         0         0      1851
   in     304.00 seconds
 Image            has     2609 counts for  8.582     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g200370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4460      1873              0         0         0      2587
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4460      1873              0         0         0      2587
   in     304.00 seconds
 Image            has     1873 counts for  6.161     counts/sec
 Command not found; type ? for a command listing
!ad10012000g200370m:ASCA >
!ad10012000g200370m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!ad10012000g200370m:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!ad10012000g200370m:ASCA > read events ad10012000g200370m.evt
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!ad10012000g200370m:ASCA-GIS2-PH > set image sky
!ad10012000g200370m:ASCA-GIS2-PH > filter region corner_point.reg
!ad10012000g200370m:ASCA-GIS2-PH > extract image
!ad10012000g200370m:ASCA-GIS2-PH > save image outfile=ad10012000g200370m.img
Wrote image to file ad10012000g200370m.img
!ad10012000g200370m:ASCA-GIS2-PH > filter pha_cut 0 170
!ad10012000g200370m:ASCA-GIS2-PH > extract image
!ad10012000g200370m:ASCA-GIS2-PH > save image outfile=ad10012000g200370m_lo.img
Wrote image to file ad10012000g200370m_lo.img
!ad10012000g200370m:ASCA-GIS2-PH > clear pha_cut
!ad10012000g200370m:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad10012000g200370m:ASCA-GIS2-PH > extract image
!ad10012000g200370m:ASCA-GIS2-PH > save image outfile=ad10012000g200370m_hi.img
Wrote image to file ad10012000g200370m_hi.img
!ad10012000g200370m:ASCA-GIS2-PH > exit save_session=no

-> Generating exposure map ad10012000g300170h.expo
-> GIS3_REGION256_OFF.4 already present in current directory
-> Standard Output From STOOL regionmap:

-ANNULUS(128.5,128.5,192,73)
-ELLIPSE(217,95,21.56,25.92,169.216)

-> gis3_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad10012000g300170h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad10012000g300170h.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256_OFF.4_regionmap.tmp
 
    making an inst map...
     multiply inst map...
 
    reading att  file: ./fa930415_2053.0240
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       94.2777       9.1392      82.6872
 Mean   RA/DEC/ROLL :       94.2803       9.1344      82.6872
 Pnt    RA/DEC/ROLL :       94.2900       9.1137      82.6872
 
 Image rebin factor :             1
 Attitude Records   :         28760
 GTI intervals      :            11
 Total GTI (secs)   :      5553.985
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:        0.0000000       0.0000000
  10 Percent Complete: Total/live time:     1041.9842529    1041.9842529
  20 Percent Complete: Total/live time:     2495.9843750    2495.9843750
  30 Percent Complete: Total/live time:     2495.9843750    2495.9843750
  40 Percent Complete: Total/live time:     4799.9843750    4799.9843750
  50 Percent Complete: Total/live time:     4799.9843750    4799.9843750
  60 Percent Complete: Total/live time:     4800.4125977    4800.4125977
  70 Percent Complete: Total/live time:     4800.4125977    4800.4125977
  80 Percent Complete: Total/live time:     5553.9848633    5553.9848633
 100 Percent Complete: Total/live time:     5553.9848633    5553.9848633
 
 Number of attitude steps  used:            7
 Number of attitude steps avail:        16606
 Mean RA/DEC pixel offset:        1.8167      -1.3524
 
    writing expo file: ad10012000g300170h.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad10012000g300170h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] ad10012000g300170h
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.56E+04   134746     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         134746    134746              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        134746    134746              0         0         0         0
   in    5553.98 seconds
 Image            has   134746 counts for  24.26     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         134746     78550              0         0         0     56196
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        134746     78550              0         0         0     56196
   in    5553.98 seconds
 Image            has    78550 counts for  14.14     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         134746     56813              0         0         0     77933
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        134746     56813              0         0         0     77933
   in    5553.98 seconds
 Image            has    56813 counts for  10.23     counts/sec
 Command not found; type ? for a command listing
!ad10012000g300170h:ASCA >
!ad10012000g300170h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!ad10012000g300170h:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!ad10012000g300170h:ASCA > read events ad10012000g300170h.evt
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!ad10012000g300170h:ASCA-GIS3-PH > set image sky
!ad10012000g300170h:ASCA-GIS3-PH > filter region corner_point.reg
!ad10012000g300170h:ASCA-GIS3-PH > extract image
!ad10012000g300170h:ASCA-GIS3-PH > save image outfile=ad10012000g300170h.img
Wrote image to file ad10012000g300170h.img
!ad10012000g300170h:ASCA-GIS3-PH > filter pha_cut 0 170
!ad10012000g300170h:ASCA-GIS3-PH > extract image
!ad10012000g300170h:ASCA-GIS3-PH > save image outfile=ad10012000g300170h_lo.img
Wrote image to file ad10012000g300170h_lo.img
!ad10012000g300170h:ASCA-GIS3-PH > clear pha_cut
!ad10012000g300170h:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad10012000g300170h:ASCA-GIS3-PH > extract image
!ad10012000g300170h:ASCA-GIS3-PH > save image outfile=ad10012000g300170h_hi.img
Wrote image to file ad10012000g300170h_hi.img
!ad10012000g300170h:ASCA-GIS3-PH > exit save_session=no

-> Generating exposure map ad10012000g300270h.expo
-> GIS3_REGION256_OFF.4 already present in current directory
-> gis3_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad10012000g300270h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad10012000g300270h.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256_OFF.4_regionmap.tmp
 
    making an inst map...
     multiply inst map...
 
    reading att  file: ./fa930416_0239.0325
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       94.2777       9.1392      82.6892
 Mean   RA/DEC/ROLL :       94.2855       9.1335      82.6892
 Pnt    RA/DEC/ROLL :       94.2674       9.1436      82.6892
 
 Image rebin factor :             1
 Attitude Records   :          2297
 GTI intervals      :             6
 Total GTI (secs)   :      1009.996
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:        0.0000000       0.0000000
  10 Percent Complete: Total/live time:     1009.9964600    1009.9964600
 100 Percent Complete: Total/live time:     1009.9964600    1009.9964600
 
 Number of attitude steps  used:            2
 Number of attitude steps avail:         2028
 Mean RA/DEC pixel offset:        1.1363      -2.0498
 
    writing expo file: ad10012000g300270h.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad10012000g300270h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] ad10012000g300270h
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     16/04/93 02:40:04 0.10E+04    26530     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g300270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          26530     26530              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         26530     26530              0         0         0         0
   in    1010.00 seconds
 Image            has    26530 counts for  26.27     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g300270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          26530     15536              0         0         0     10994
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         26530     15536              0         0         0     10994
   in    1010.00 seconds
 Image            has    15536 counts for  15.38     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g300270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          26530     11100              0         0         0     15430
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         26530     11100              0         0         0     15430
   in    1010.00 seconds
 Image            has    11100 counts for  10.99     counts/sec
 Command not found; type ? for a command listing
!ad10012000g300270h:ASCA >
!ad10012000g300270h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!ad10012000g300270h:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!ad10012000g300270h:ASCA > read events ad10012000g300270h.evt
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!ad10012000g300270h:ASCA-GIS3-PH > set image sky
!ad10012000g300270h:ASCA-GIS3-PH > filter region corner_point.reg
!ad10012000g300270h:ASCA-GIS3-PH > extract image
!ad10012000g300270h:ASCA-GIS3-PH > save image outfile=ad10012000g300270h.img
Wrote image to file ad10012000g300270h.img
!ad10012000g300270h:ASCA-GIS3-PH > filter pha_cut 0 170
!ad10012000g300270h:ASCA-GIS3-PH > extract image
!ad10012000g300270h:ASCA-GIS3-PH > save image outfile=ad10012000g300270h_lo.img
Wrote image to file ad10012000g300270h_lo.img
!ad10012000g300270h:ASCA-GIS3-PH > clear pha_cut
!ad10012000g300270h:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad10012000g300270h:ASCA-GIS3-PH > extract image
!ad10012000g300270h:ASCA-GIS3-PH > save image outfile=ad10012000g300270h_hi.img
Wrote image to file ad10012000g300270h_hi.img
!ad10012000g300270h:ASCA-GIS3-PH > exit save_session=no

-> Generating exposure map ad10012000g300370m.expo
-> GIS3_REGION256_OFF.4 already present in current directory
-> gis3_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad10012000g300370m.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad10012000g300370m.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256_OFF.4_regionmap.tmp
 
    making an inst map...
     multiply inst map...
 
    reading att  file: ./fa930416_0239.0325
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       94.2777       9.1392      82.6891
 Mean   RA/DEC/ROLL :       94.2851       9.1334      82.6891
 Pnt    RA/DEC/ROLL :       94.2679       9.1429      82.6891
 
 Image rebin factor :             1
 Attitude Records   :          2297
 GTI intervals      :             7
 Total GTI (secs)   :       303.999
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:        0.0000000       0.0000000
  10 Percent Complete: Total/live time:      267.9993591     267.9993591
  20 Percent Complete: Total/live time:      267.9993591     267.9993591
  30 Percent Complete: Total/live time:      275.9993896     275.9993896
  40 Percent Complete: Total/live time:      275.9993896     275.9993896
  50 Percent Complete: Total/live time:      303.9992676     303.9992676
 100 Percent Complete: Total/live time:      303.9992676     303.9992676
 
 Number of attitude steps  used:            4
 Number of attitude steps avail:           84
 Mean RA/DEC pixel offset:        1.7257      -2.8320
 
    writing expo file: ad10012000g300370m.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad10012000g300370m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] ad10012000g300370m
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       MEDIUM   16/04/93 02:57:48 0.30E+03     4480     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g300370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4480      4480              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4480      4480              0         0         0         0
   in     304.00 seconds
 Image            has     4480 counts for  14.74     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g300370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4480      2627              0         0         0      1853
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4480      2627              0         0         0      1853
   in     304.00 seconds
 Image            has     2627 counts for  8.641     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g300370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4480      1865              0         0         0      2615
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4480      1865              0         0         0      2615
   in     304.00 seconds
 Image            has     1865 counts for  6.135     counts/sec
 Command not found; type ? for a command listing
!ad10012000g300370m:ASCA >
!ad10012000g300370m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!ad10012000g300370m:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!ad10012000g300370m:ASCA > read events ad10012000g300370m.evt
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!ad10012000g300370m:ASCA-GIS3-PH > set image sky
!ad10012000g300370m:ASCA-GIS3-PH > filter region corner_point.reg
!ad10012000g300370m:ASCA-GIS3-PH > extract image
!ad10012000g300370m:ASCA-GIS3-PH > save image outfile=ad10012000g300370m.img
Wrote image to file ad10012000g300370m.img
!ad10012000g300370m:ASCA-GIS3-PH > filter pha_cut 0 170
!ad10012000g300370m:ASCA-GIS3-PH > extract image
!ad10012000g300370m:ASCA-GIS3-PH > save image outfile=ad10012000g300370m_lo.img
Wrote image to file ad10012000g300370m_lo.img
!ad10012000g300370m:ASCA-GIS3-PH > clear pha_cut
!ad10012000g300370m:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad10012000g300370m:ASCA-GIS3-PH > extract image
!ad10012000g300370m:ASCA-GIS3-PH > save image outfile=ad10012000g300370m_hi.img
Wrote image to file ad10012000g300370m_hi.img
!ad10012000g300370m:ASCA-GIS3-PH > exit save_session=no

-> Generating exposure map ad10012000s000102h.expo
-> s0_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad10012000s000102h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad10012000s000102h.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s0_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:           ON          ON          ON          ON
 AREA DISC  IN/OUT:           IN          IN          IN          IN
 AREA DISC H START:            6           6         321           6
 AREA DISC H  STOP:            7         100         425           7
 AREA DISC V START:            2         252         354           2
 AREA DISC V  STOP:            3         422         422           3
  
    reading att  file: ./fa930415_2053.0240
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       94.2777       9.1392      82.6901
 Mean   RA/DEC/ROLL :       94.2979       9.1451      82.6901
 Pnt    RA/DEC/ROLL :       94.2718       9.1034      82.6901
 
 Image rebin factor :             4
 Attitude Records   :         28760
 Hot Pixels         :             0
 GTI intervals      :             1
 Total GTI (secs)   :        13.931
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:        0.0000000       0.0000000
  10 Percent Complete: Total/live time:       13.9314661      13.9314661
 100 Percent Complete: Total/live time:       13.9314661      13.9314661
 
 Number of attitude steps  used:            2
 Number of attitude steps avail:          188
 Mean RA/DEC pixel offset:      -18.4294     -42.4801
 
    writing expo file: ad10012000s000102h.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad10012000s000102h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] ad10012000s000102h
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.14E+02      301 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            301       301              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           301       301              0         0         0         0
   in      13.93 seconds
 Image            has      301 counts for  21.61     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            301       210              0         0         0        91
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           301       210              0         0         0        91
   in      13.93 seconds
 Image            has      210 counts for  15.07     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            301        91              0         0         0       210
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           301        91              0         0         0       210
   in      13.93 seconds
 Image            has       91 counts for  6.532     counts/sec
 Command not found; type ? for a command listing
!ad10012000s000102h:ASCA >
!ad10012000s000102h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!ad10012000s000102h:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!ad10012000s000102h:ASCA > read events ad10012000s000102h.evt
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!ad10012000s000102h:ASCA-SIS0-BRIGHT > set image sky
!ad10012000s000102h:ASCA-SIS0-BRIGHT > filter region corner_point.reg
!ad10012000s000102h:ASCA-SIS0-BRIGHT > extract image
!ad10012000s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad10012000s000102h.img
Wrote image to file ad10012000s000102h.img
!ad10012000s000102h:ASCA-SIS0-BRIGHT > filter pha_cut 0 547
!ad10012000s000102h:ASCA-SIS0-BRIGHT > extract image
!ad10012000s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad10012000s000102h_lo.img
Wrote image to file ad10012000s000102h_lo.img
!ad10012000s000102h:ASCA-SIS0-BRIGHT > clear pha_cut
!ad10012000s000102h:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad10012000s000102h:ASCA-SIS0-BRIGHT > extract image
!ad10012000s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad10012000s000102h_hi.img
Wrote image to file ad10012000s000102h_hi.img
!ad10012000s000102h:ASCA-SIS0-BRIGHT > exit save_session=no

-> Generating exposure map ad10012000s000202h.expo
-> s0_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad10012000s000202h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad10012000s000202h.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s0_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:           ON          ON          ON          ON
 AREA DISC  IN/OUT:           IN          IN          IN          IN
 AREA DISC H START:            6           6         321           6
 AREA DISC H  STOP:            7         100         425           7
 AREA DISC V START:            2         252         354           2
 AREA DISC V  STOP:            3         422         422           3
  
    reading att  file: ./fa930415_2053.0240
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       94.2777       9.1392      82.6902
 Mean   RA/DEC/ROLL :       94.2988       9.1441      82.6902
 Pnt    RA/DEC/ROLL :       94.2546       9.1331      82.6902
 
 Image rebin factor :             4
 Attitude Records   :         28760
 Hot Pixels         :           258
 GTI intervals      :             2
 Total GTI (secs)   :      2176.000
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:        0.0000000       0.0000000
  10 Percent Complete: Total/live time:     2176.0000000    2176.0000000
 100 Percent Complete: Total/live time:     2176.0000000    2176.0000000
 
 Number of attitude steps  used:            2
 Number of attitude steps avail:         4508
 Mean RA/DEC pixel offset:      -16.7668     -45.1925
 
    writing expo file: ad10012000s000202h.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad10012000s000202h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] ad10012000s000202h
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT   HIGH     16/04/93 00:49:08 0.22E+04    65766 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s000202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          65766     65766              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         65766     65766              0         0         0         0
   in    2176.00 seconds
 Image            has    65766 counts for  30.22     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s000202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          65766     45350              0         0         0     20416
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         65766     45350              0         0         0     20416
   in    2176.00 seconds
 Image            has    45350 counts for  20.84     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s000202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          65766     20471              0         0         0     45295
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         65766     20471              0         0         0     45295
   in    2176.00 seconds
 Image            has    20471 counts for  9.408     counts/sec
 Command not found; type ? for a command listing
!ad10012000s000202h:ASCA >
!ad10012000s000202h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!ad10012000s000202h:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!ad10012000s000202h:ASCA > read events ad10012000s000202h.evt
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!ad10012000s000202h:ASCA-SIS0-BRIGHT > set image sky
!ad10012000s000202h:ASCA-SIS0-BRIGHT > filter region corner_point.reg
!ad10012000s000202h:ASCA-SIS0-BRIGHT > extract image
!ad10012000s000202h:ASCA-SIS0-BRIGHT > save image outfile=ad10012000s000202h.img
Wrote image to file ad10012000s000202h.img
!ad10012000s000202h:ASCA-SIS0-BRIGHT > filter pha_cut 0 547
!ad10012000s000202h:ASCA-SIS0-BRIGHT > extract image
!ad10012000s000202h:ASCA-SIS0-BRIGHT > save image outfile=ad10012000s000202h_lo.img
Wrote image to file ad10012000s000202h_lo.img
!ad10012000s000202h:ASCA-SIS0-BRIGHT > clear pha_cut
!ad10012000s000202h:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad10012000s000202h:ASCA-SIS0-BRIGHT > extract image
!ad10012000s000202h:ASCA-SIS0-BRIGHT > save image outfile=ad10012000s000202h_hi.img
Wrote image to file ad10012000s000202h_hi.img
!ad10012000s000202h:ASCA-SIS0-BRIGHT > exit save_session=no

-> Generating exposure map ad10012000s100102h.expo
-> s1_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad10012000s100102h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad10012000s100102h.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s1_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:           ON          ON          ON          ON
 AREA DISC  IN/OUT:           IN          IN          IN          IN
 AREA DISC H START:          376           6           6           6
 AREA DISC H  STOP:          425           7           7          45
 AREA DISC V START:          410           2           2         308
 AREA DISC V  STOP:          422           3           3         422
  
    reading att  file: ./fa930415_2053.0240
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       94.2777       9.1392      82.6876
 Mean   RA/DEC/ROLL :       94.2821       9.1480      82.6876
 Pnt    RA/DEC/ROLL :       94.2876       9.1004      82.6876
 
 Image rebin factor :             4
 Attitude Records   :         28760
 Hot Pixels         :           227
 GTI intervals      :            10
 Total GTI (secs)   :      3169.945
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:        0.0000000       0.0000000
  10 Percent Complete: Total/live time:     1012.0133667    1012.0133667
  20 Percent Complete: Total/live time:     1012.0133667    1012.0133667
  30 Percent Complete: Total/live time:     1012.4824829    1012.4824829
  40 Percent Complete: Total/live time:     2689.9448242    2689.9448242
  50 Percent Complete: Total/live time:     2689.9448242    2689.9448242
  60 Percent Complete: Total/live time:     3169.9448242    3169.9448242
 100 Percent Complete: Total/live time:     3169.9448242    3169.9448242
 
 Number of attitude steps  used:            5
 Number of attitude steps avail:        11866
 Mean RA/DEC pixel offset:      -33.4301     -14.1819
 
    writing expo file: ad10012000s100102h.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad10012000s100102h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] ad10012000s100102h
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.32E+04    81884 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          81884     81884              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         81884     81884              0         0         0         0
   in    3169.94 seconds
 Image            has    81884 counts for  25.83     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          81884     56233              0         0         0     25651
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         81884     56233              0         0         0     25651
   in    3169.94 seconds
 Image            has    56233 counts for  17.74     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          81884     25718              0         0         0     56166
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         81884     25718              0         0         0     56166
   in    3169.94 seconds
 Image            has    25718 counts for  8.113     counts/sec
 Command not found; type ? for a command listing
!ad10012000s100102h:ASCA >
!ad10012000s100102h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!ad10012000s100102h:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!ad10012000s100102h:ASCA > read events ad10012000s100102h.evt
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!ad10012000s100102h:ASCA-SIS1-BRIGHT > set image sky
!ad10012000s100102h:ASCA-SIS1-BRIGHT > filter region corner_point.reg
!ad10012000s100102h:ASCA-SIS1-BRIGHT > extract image
!ad10012000s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad10012000s100102h.img
Wrote image to file ad10012000s100102h.img
!ad10012000s100102h:ASCA-SIS1-BRIGHT > filter pha_cut 0 547
!ad10012000s100102h:ASCA-SIS1-BRIGHT > extract image
!ad10012000s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad10012000s100102h_lo.img
Wrote image to file ad10012000s100102h_lo.img
!ad10012000s100102h:ASCA-SIS1-BRIGHT > clear pha_cut
!ad10012000s100102h:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad10012000s100102h:ASCA-SIS1-BRIGHT > extract image
!ad10012000s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad10012000s100102h_hi.img
Wrote image to file ad10012000s100102h_hi.img
!ad10012000s100102h:ASCA-SIS1-BRIGHT > exit save_session=no

-> Generating exposure map ad10012000s100202h.expo
-> s1_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad10012000s100202h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad10012000s100202h.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s1_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:           ON          ON          ON          ON
 AREA DISC  IN/OUT:           IN          IN          IN          IN
 AREA DISC H START:          376           6           6           6
 AREA DISC H  STOP:          425           7           7          45
 AREA DISC V START:          410           2           2         308
 AREA DISC V  STOP:          422           3           3         422
  
    reading att  file: ./fa930415_2053.0240
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       94.2777       9.1392      82.6877
 Mean   RA/DEC/ROLL :       94.2830       9.1470      82.6877
 Pnt    RA/DEC/ROLL :       94.2704       9.1302      82.6877
 
 Image rebin factor :             4
 Attitude Records   :         28760
 Hot Pixels         :           209
 GTI intervals      :             4
 Total GTI (secs)   :      2201.969
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:        0.0000000       0.0000000
  10 Percent Complete: Total/live time:     2169.9687500    2169.9687500
  20 Percent Complete: Total/live time:     2169.9687500    2169.9687500
  30 Percent Complete: Total/live time:     2170.3962402    2170.3962402
  40 Percent Complete: Total/live time:     2170.3962402    2170.3962402
  50 Percent Complete: Total/live time:     2201.9687500    2201.9687500
 100 Percent Complete: Total/live time:     2201.9687500    2201.9687500
 
 Number of attitude steps  used:            4
 Number of attitude steps avail:         5194
 Mean RA/DEC pixel offset:      -27.4805     -14.2117
 
    writing expo file: ad10012000s100202h.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad10012000s100202h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] ad10012000s100202h
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT   HIGH     16/04/93 00:49:52 0.22E+04    57203 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          57203     57203              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         57203     57203              0         0         0         0
   in    2201.97 seconds
 Image            has    57203 counts for  25.98     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          57203     39860              0         0         0     17343
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         57203     39860              0         0         0     17343
   in    2201.97 seconds
 Image            has    39860 counts for  18.10     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          57203     17395              0         0         0     39808
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         57203     17395              0         0         0     39808
   in    2201.97 seconds
 Image            has    17395 counts for  7.900     counts/sec
 Command not found; type ? for a command listing
!ad10012000s100202h:ASCA >
!ad10012000s100202h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!ad10012000s100202h:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!ad10012000s100202h:ASCA > read events ad10012000s100202h.evt
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!ad10012000s100202h:ASCA-SIS1-BRIGHT > set image sky
!ad10012000s100202h:ASCA-SIS1-BRIGHT > filter region corner_point.reg
!ad10012000s100202h:ASCA-SIS1-BRIGHT > extract image
!ad10012000s100202h:ASCA-SIS1-BRIGHT > save image outfile=ad10012000s100202h.img
Wrote image to file ad10012000s100202h.img
!ad10012000s100202h:ASCA-SIS1-BRIGHT > filter pha_cut 0 547
!ad10012000s100202h:ASCA-SIS1-BRIGHT > extract image
!ad10012000s100202h:ASCA-SIS1-BRIGHT > save image outfile=ad10012000s100202h_lo.img
Wrote image to file ad10012000s100202h_lo.img
!ad10012000s100202h:ASCA-SIS1-BRIGHT > clear pha_cut
!ad10012000s100202h:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad10012000s100202h:ASCA-SIS1-BRIGHT > extract image
!ad10012000s100202h:ASCA-SIS1-BRIGHT > save image outfile=ad10012000s100202h_hi.img
Wrote image to file ad10012000s100202h_hi.img
!ad10012000s100202h:ASCA-SIS1-BRIGHT > exit save_session=no

-> Generating exposure map ad10012000s100402h.expo
-> s1_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad10012000s100402h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad10012000s100402h.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s1_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:           ON          ON          ON          ON
 AREA DISC  IN/OUT:           IN          IN          IN          IN
 AREA DISC H START:          376           6           6           6
 AREA DISC H  STOP:          425           7           7          45
 AREA DISC V START:          410           2           2         308
 AREA DISC V  STOP:          422           3           3         422
  
    reading att  file: ./fa930416_0239.0325
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       94.2777       9.1392      82.6895
 Mean   RA/DEC/ROLL :       94.2879       9.1466      82.6895
 Pnt    RA/DEC/ROLL :       94.2651       9.1306      82.6895
 
 Image rebin factor :             4
 Attitude Records   :          2297
 Hot Pixels         :           167
 GTI intervals      :             5
 Total GTI (secs)   :       877.969
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:        0.0000000       0.0000000
  10 Percent Complete: Total/live time:      877.9687500     877.9687500
 100 Percent Complete: Total/live time:      877.9687500     877.9687500
 
 Number of attitude steps  used:            2
 Number of attitude steps avail:         2020
 Mean RA/DEC pixel offset:      -20.1409     -20.6152
 
    writing expo file: ad10012000s100402h.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad10012000s100402h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] ad10012000s100402h
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT   HIGH     16/04/93 02:39:52 0.88E+03    23883 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100402h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          23883     23883              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         23883     23883              0         0         0         0
   in     877.97 seconds
 Image            has    23883 counts for  27.20     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100402h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          23883     16594              0         0         0      7289
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         23883     16594              0         0         0      7289
   in     877.97 seconds
 Image            has    16594 counts for  18.90     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100402h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          23883      7307              0         0         0     16576
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         23883      7307              0         0         0     16576
   in     877.97 seconds
 Image            has     7307 counts for  8.323     counts/sec
 Command not found; type ? for a command listing
!ad10012000s100402h:ASCA >
!ad10012000s100402h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!ad10012000s100402h:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!ad10012000s100402h:ASCA > read events ad10012000s100402h.evt
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!ad10012000s100402h:ASCA-SIS1-BRIGHT > set image sky
!ad10012000s100402h:ASCA-SIS1-BRIGHT > filter region corner_point.reg
!ad10012000s100402h:ASCA-SIS1-BRIGHT > extract image
!ad10012000s100402h:ASCA-SIS1-BRIGHT > save image outfile=ad10012000s100402h.img
Wrote image to file ad10012000s100402h.img
!ad10012000s100402h:ASCA-SIS1-BRIGHT > filter pha_cut 0 547
!ad10012000s100402h:ASCA-SIS1-BRIGHT > extract image
!ad10012000s100402h:ASCA-SIS1-BRIGHT > save image outfile=ad10012000s100402h_lo.img
Wrote image to file ad10012000s100402h_lo.img
!ad10012000s100402h:ASCA-SIS1-BRIGHT > clear pha_cut
!ad10012000s100402h:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad10012000s100402h:ASCA-SIS1-BRIGHT > extract image
!ad10012000s100402h:ASCA-SIS1-BRIGHT > save image outfile=ad10012000s100402h_hi.img
Wrote image to file ad10012000s100402h_hi.img
!ad10012000s100402h:ASCA-SIS1-BRIGHT > exit save_session=no

-> Summing sis images
-> Summing the following images to produce ad10012000sis32002.totexpo

ad10012000s000102h.expo
ad10012000s000202h.expo
ad10012000s100102h.expo
ad10012000s100202h.expo
ad10012000s100402h.expo

-> Summing the following images to produce ad10012000sis32002_all.totsky

ad10012000s000102h.img
ad10012000s000202h.img
ad10012000s100102h.img
ad10012000s100202h.img
ad10012000s100402h.img

-> Summing the following images to produce ad10012000sis32002_lo.totsky

ad10012000s000102h_lo.img
ad10012000s000202h_lo.img
ad10012000s100102h_lo.img
ad10012000s100202h_lo.img
ad10012000s100402h_lo.img

-> Summing the following images to produce ad10012000sis32002_hi.totsky

ad10012000s000102h_hi.img
ad10012000s000202h_hi.img
ad10012000s100102h_hi.img
ad10012000s100202h_hi.img
ad10012000s100402h_hi.img

-> Running XIMAGE to create ad10012000sis32002.gif
-> Standard Output From STOOL ximage:

 No of detectors read in:   20
![1]XIMAGE> read/fits ad10012000sis32002_all.totsky
 Reading an image
 Telescope ASCA SIS0
  Image display size =  320
 Done, closing file
  Largest, Smallest    390.000  0.
  Bscale, Bzero from file     1.0000000000000  0.
After internal scaling
  Bscale and Bzero    1.0000000000000  0.
 Image level, max:  390 min:  0
![2]XIMAGE> read/exp_map ad10012000sis32002.totexpo
 Reading an image
 Telescope ASCA SIS0
  Image display size =  320
 Done, closing file
  Largest, Smallest    140.664  0.
  Bscale, Bzero from file     1.0000000000000  0.
After internal scaling
  Bscale and Bzero    1.0000000000000  0.
 Image level, max:  140 min:  0
![3]XIMAGE> smooth
![4]XIMAGE> cpd /ppm
![5]XIMAGE> cey 2000
![6]XIMAGE> disp/correct/noframe
 Displaying image
 The image is exposure corrected
  Min =  0 max =   32767
![7]XIMAGE> grid
![8]XIMAGE> scale
 scal_f, min_inten    1.00000  0.
 i,inten,mm,pp  1  0.  0  0
 i,inten,mm,pp  2    4.00000  40  -1
 i,inten,mm,pp  3    12.0000  12  0
 i,inten,mm,pp  4    42.0000  42  0
![9]XIMAGE> exit

-> Summing gis images
-> Summing the following images to produce ad10012000gis25670.totexpo

ad10012000g200170h.expo
ad10012000g200270h.expo
ad10012000g200370m.expo
ad10012000g300170h.expo
ad10012000g300270h.expo
ad10012000g300370m.expo

-> Summing the following images to produce ad10012000gis25670_all.totsky

ad10012000g200170h.img
ad10012000g200270h.img
ad10012000g200370m.img
ad10012000g300170h.img
ad10012000g300270h.img
ad10012000g300370m.img

-> Summing the following images to produce ad10012000gis25670_lo.totsky

ad10012000g200170h_lo.img
ad10012000g200270h_lo.img
ad10012000g200370m_lo.img
ad10012000g300170h_lo.img
ad10012000g300270h_lo.img
ad10012000g300370m_lo.img

-> Summing the following images to produce ad10012000gis25670_hi.totsky

ad10012000g200170h_hi.img
ad10012000g200270h_hi.img
ad10012000g200370m_hi.img
ad10012000g300170h_hi.img
ad10012000g300270h_hi.img
ad10012000g300370m_hi.img

-> Running XIMAGE to create ad10012000gis25670.gif
-> Standard Output From STOOL ximage:

 No of detectors read in:   20
![1]XIMAGE> read/fits ad10012000gis25670_all.totsky
 Reading an image
 Telescope ASCA GIS2
  Image display size =  256
 Done, closing file
  Largest, Smallest    2474.00  0.
  Bscale, Bzero from file     1.0000000000000  0.
After internal scaling
  Bscale and Bzero    1.0000000000000  0.
 Image level, max:  2474 min:  0
![2]XIMAGE> read/exp_map ad10012000gis25670.totexpo
 Reading an image
 Telescope ASCA GIS2
  Image display size =  256
 Done, closing file
  Largest, Smallest    228.933  0.
  Bscale, Bzero from file     1.0000000000000  0.
After internal scaling
  Bscale and Bzero    1.0000000000000  0.
 Image level, max:  228 min:  0
![3]XIMAGE> smooth
![4]XIMAGE> cpd /ppm
![5]XIMAGE> cey 2000
![6]XIMAGE> disp/correct/noframe
 Displaying image
 The image is exposure corrected
  Min =  0 max =   1882
![7]XIMAGE> grid
![8]XIMAGE> scale
 scal_f, min_inten    1.00000  0.
 i,inten,mm,pp  1  0.  0  0
 i,inten,mm,pp  2    4.00000  40  -1
 i,inten,mm,pp  3    12.0000  12  0
 i,inten,mm,pp  4    57.0000  57  0
![9]XIMAGE> exit

Detecting sources in summed images ( 22:41:30 )

-> Smoothing ad10012000gis25670_all.totsky with ad10012000gis25670.totexpo
-> Clipping exposures below 2060.3941956 seconds
-> Detecting sources in ad10012000gis25670_all.smooth
-> Standard Output From STOOL ascasource:

127 129 0.142133 86 7 3288.54

-> Smoothing ad10012000gis25670_hi.totsky with ad10012000gis25670.totexpo
-> Clipping exposures below 2060.3941956 seconds
-> Detecting sources in ad10012000gis25670_hi.smooth
-> Standard Output From STOOL ascasource:

127 129 0.0690564 86 6 3496.41

-> Smoothing ad10012000gis25670_lo.totsky with ad10012000gis25670.totexpo
-> Clipping exposures below 2060.3941956 seconds
-> Detecting sources in ad10012000gis25670_lo.smooth
-> Standard Output From STOOL ascasource:

127 129 0.0738047 86 8 3000.31

-> Determining extraction radii
-> Eliminating redundant sources
-> Standard Output From STOOL sift_sources:

127 129 24 F

-> Standard Output From STOOL colorpic:

color plane 0
color plane 1
color plane 2
writing image
image written

-> Creating fits catalog of sources: ad10012000gis25670.src
-> Smoothing ad10012000sis32002_all.totsky with ad10012000sis32002.totexpo
-> Clipping exposures below 1265.9720685 seconds
-> Detecting sources in ad10012000sis32002_all.smooth
-> Standard Output From STOOL ascasource:

159 161 0.0375166 163 17 1711.56

-> Smoothing ad10012000sis32002_hi.totsky with ad10012000sis32002.totexpo
-> Clipping exposures below 1265.9720685 seconds
-> Detecting sources in ad10012000sis32002_hi.smooth
-> Standard Output From STOOL ascasource:

159 162 0.0185005 164 12 1680.8

-> Smoothing ad10012000sis32002_lo.totsky with ad10012000sis32002.totexpo
-> Clipping exposures below 1265.9720685 seconds
-> Detecting sources in ad10012000sis32002_lo.smooth
-> Standard Output From STOOL ascasource:

155 157 0.0231019 164 18 1699.28

-> Determining extraction radii
-> Eliminating redundant sources
-> Standard Output From STOOL sift_sources:

159 161 38 T

-> Standard Output From STOOL colorpic:

color plane 0
color plane 1
color plane 2
writing image
image written

-> Creating fits catalog of sources: ad10012000sis32002.src
-> Generating region files
-> Converting (636.0,644.0,2.0) to s0 detector coordinates
-> Using events in: ad10012000s000102h.evt ad10012000s000202h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   39692.000
 The mean of the selected column is                  620.18750
 The standard deviation of the selected column is    1.1251102
 The minimum of selected column is                   618.00000
 The maximum of selected column is                   623.00000
 The number of points used in calculation is               64

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   37834.000
 The mean of the selected column is                  591.15625
 The standard deviation of the selected column is    1.3940776
 The minimum of selected column is                   588.00000
 The maximum of selected column is                   594.00000
 The number of points used in calculation is               64

-> Converting (636.0,644.0,2.0) to s1 detector coordinates
-> Using events in: ad10012000s100102h.evt ad10012000s100202h.evt ad10012000s100402h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   29054.000
 The mean of the selected column is                  618.17021
 The standard deviation of the selected column is    1.2036024
 The minimum of selected column is                   616.00000
 The maximum of selected column is                   621.00000
 The number of points used in calculation is               47

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   29110.000
 The mean of the selected column is                  619.36170
 The standard deviation of the selected column is    4.6411465
 The minimum of selected column is                   613.00000
 The maximum of selected column is                   626.00000
 The number of points used in calculation is               47

-> Converting (127.0,129.0,2.0) to g2 detector coordinates
-> Using events in: ad10012000g200170h.evt ad10012000g200270h.evt ad10012000g200370m.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   1612851.0
 The mean of the selected column is                  123.88440
 The standard deviation of the selected column is    1.0692356
 The minimum of selected column is                   121.00000
 The maximum of selected column is                   126.00000
 The number of points used in calculation is            13019

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   1634021.0
 The mean of the selected column is                  125.51048
 The standard deviation of the selected column is    1.1836093
 The minimum of selected column is                   122.00000
 The maximum of selected column is                   128.00000
 The number of points used in calculation is            13019

-> Converting (127.0,129.0,2.0) to g3 detector coordinates
-> Using events in: ad10012000g300170h.evt ad10012000g300270h.evt ad10012000g300370m.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   1858446.0
 The mean of the selected column is                  129.76163
 The standard deviation of the selected column is    1.0595096
 The minimum of selected column is                   127.00000
 The maximum of selected column is                   132.00000
 The number of points used in calculation is            14322

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   1805652.0
 The mean of the selected column is                  126.07541
 The standard deviation of the selected column is    1.1575963
 The minimum of selected column is                   122.00000
 The maximum of selected column is                   129.00000
 The number of points used in calculation is            14322

Extracting spectra and generating response matrices ( 22:52:11 )

-> Fetching xrt_ea_v2_0.fits
-> Fetching xrt_psf_v2_0.fits
-> sisph2pi_110397.fits already present in current directory
-> Fetching sisechos_290296.fits
-> Fetching sisrddis_290296.fits
-> Standard Output From STOOL group_event_files:

1 ad10012000s000102h.evt 66067
1 ad10012000s000202h.evt 66067

-> Fetching SIS0_OFFCHIP.1
-> Extracting ad10012000s010102_1.pi from ad10012000s032002_1.reg and:

ad10012000s000102h.evt
ad10012000s000202h.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.14E+02      301 1111
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.14E+02      301 1111
      2 X0614+09 BRIGHT   HIGH     16/04/93 00:49:08 0.22E+04    65766 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            301       162            139         0         0         0
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s000202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          65766     49872          15894         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         66067     50034          16033         0         0         0
   in    2189.93 seconds
 Spectrum         has    50034 counts for  22.85     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 2189.9          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 3.87793E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      12  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10012000s010102_1.pi
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            301       162            139         0         0         0
 Writing events file
    162 events written to the output file
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s000202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          65766     49872          15894         0         0         0
 Writing events file
  50034 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         66067     50034          16033         0         0         0
   in    2189.93 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events ad10012000s000102h.evt
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS0-BRIGHT > read events ad10012000s000202h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS0-BRIGHT > set phaname PI
!xsel:ASCA-SIS0-BRIGHT > filter region ad10012000s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.1
!xsel:ASCA-SIS0-BRIGHT > filter region ad10012000s010102.discrim
!xsel:ASCA-SIS0-BRIGHT > extract spectrum
!xsel:ASCA-SIS0-BRIGHT > save spectrum ad10012000s010102_1.pi group=yes
Wrote spectrum to ad10012000s010102_1.pi
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data24/seq_proc/10012000.007/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Grouping ad10012000s010102_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 2189.9          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 3.87793E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      12  of undefined grouping (Channel quality=bad)
 ...        13 -     160  are single channels
 ...       161 -     162  are grouped by a factor        2
 ...       163 -     164  are single channels
 ...       165 -     166  are grouped by a factor        2
 ...       167 -     174  are single channels
 ...       175 -     176  are grouped by a factor        2
 ...       177 -     177  are single channels
 ...       178 -     207  are grouped by a factor        2
 ...       208 -     219  are grouped by a factor        3
 ...       220 -     227  are grouped by a factor        4
 ...       228 -     233  are grouped by a factor        3
 ...       234 -     237  are grouped by a factor        4
 ...       238 -     242  are grouped by a factor        5
 ...       243 -     254  are grouped by a factor        6
 ...       255 -     262  are grouped by a factor        8
 ...       263 -     272  are grouped by a factor       10
 ...       273 -     283  are grouped by a factor       11
 ...       284 -     299  are grouped by a factor       16
 ...       300 -     320  are grouped by a factor       21
 ...       321 -     363  are grouped by a factor       43
 ...       364 -     511  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10012000s010102_1.pi
 ** grppha 2.6.0 completed successfully

-> Source occupies chip(s) 0 1 2 3
-> Fetching SIS0_NOTCHIP1.1
-> Fetching SIS0_NOTCHIP2.1
-> Fetching SIS0_NOTCHIP3.1
-> Extracting spectrum from chip 0
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.22E+04    50034 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
          50034      3789          46245         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         50034      3789          46245         0         0         0
   in    2189.93 seconds
 Spectrum         has     3789 counts for  1.730     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 2189.9          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 6.95312E-03     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      12  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec0.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events events.tmp
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS0-BRIGHT > set phaname PI
!xsel:ASCA-SIS0-BRIGHT > filter region ad10012000s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.1
!xsel:ASCA-SIS0-BRIGHT > filter region ad10012000s010102.discrim
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP1.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT > extract spectrum
!xsel:ASCA-SIS0-BRIGHT > save spectrum spec0.tmp group=yes
Wrote spectrum to spec0.tmp
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Fetching sis0c0p40_290296.fits
-> Generating RMF for chip 0
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x512 S0C0 Bright PI RMF
Calibration data from ./
Please stand by...
...Done.

-> Fetching SIS0_NOTCHIP0.1
-> SIS0_NOTCHIP2.1 already present in current directory
-> SIS0_NOTCHIP3.1 already present in current directory
-> Extracting spectrum from chip 1
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.22E+04    50034 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
          50034     27904          22130         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         50034     27904          22130         0         0         0
   in    2189.93 seconds
 Spectrum         has    27904 counts for  12.74     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 2189.9          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 1.54590E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      12  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec1.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events events.tmp
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS0-BRIGHT > set phaname PI
!xsel:ASCA-SIS0-BRIGHT > filter region ad10012000s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.1
!xsel:ASCA-SIS0-BRIGHT > filter region ad10012000s010102.discrim
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP0.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT > extract spectrum
!xsel:ASCA-SIS0-BRIGHT > save spectrum spec1.tmp group=yes
Wrote spectrum to spec1.tmp
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Fetching sis0c1p40_290296.fits
-> Generating RMF for chip 1
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x512 S0C1 Bright PI RMF
Calibration data from ./
Please stand by...
...Done.

-> SIS0_NOTCHIP0.1 already present in current directory
-> SIS0_NOTCHIP1.1 already present in current directory
-> SIS0_NOTCHIP3.1 already present in current directory
-> Extracting spectrum from chip 2
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.22E+04    50034 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
          50034     15762          34272         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         50034     15762          34272         0         0         0
   in    2189.93 seconds
 Spectrum         has    15762 counts for  7.197     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 2189.9          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 1.18164E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      12  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec2.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events events.tmp
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS0-BRIGHT > set phaname PI
!xsel:ASCA-SIS0-BRIGHT > filter region ad10012000s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.1
!xsel:ASCA-SIS0-BRIGHT > filter region ad10012000s010102.discrim
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP0.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP1.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT > extract spectrum
!xsel:ASCA-SIS0-BRIGHT > save spectrum spec2.tmp group=yes
Wrote spectrum to spec2.tmp
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Fetching sis0c2p40_290296.fits
-> Generating RMF for chip 2
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x512 S0C2 Bright PI RMF
Calibration data from ./
Please stand by...
...Done.

-> SIS0_NOTCHIP0.1 already present in current directory
-> SIS0_NOTCHIP1.1 already present in current directory
-> SIS0_NOTCHIP2.1 already present in current directory
-> Extracting spectrum from chip 3
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.22E+04    50034 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
          50034      2579          47455         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         50034      2579          47455         0         0         0
   in    2189.93 seconds
 Spectrum         has     2579 counts for  1.178     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 2189.9          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.55078E-03     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      12  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec3.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events events.tmp
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS0-BRIGHT > set phaname PI
!xsel:ASCA-SIS0-BRIGHT > filter region ad10012000s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.1
!xsel:ASCA-SIS0-BRIGHT > filter region ad10012000s010102.discrim
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP0.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP1.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT > extract spectrum
!xsel:ASCA-SIS0-BRIGHT > save spectrum spec3.tmp group=yes
Wrote spectrum to spec3.tmp
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Fetching sis0c3p40_290296.fits
-> Generating RMF for chip 3
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x512 S0C3 Bright PI RMF
Calibration data from ./
Please stand by...
...Done.

-> Chip weights:

rmf0.tmp 0.0757285046168605
rmf1.tmp 0.557700763480833
rmf2.tmp 0.315025782467922
rmf3.tmp 0.0515449494343846

-> Standard Output From FTOOL addrmf:

ADDRMF vers 1.10  10 April, 1997.
Summing ...
 7.573E-02 * rmf0.tmp
 5.577E-01 * rmf1.tmp
 3.150E-01 * rmf2.tmp
 5.154E-02 * rmf3.tmp
 RMF #    1 : rmf0.tmp                   0.08
              ASCA       SIS0       NONE       NONE       PI
 RMF #    2 : rmf1.tmp                   0.56
              ASCA       SIS0       NONE       NONE       PI
 RMF #    3 : rmf2.tmp                   0.32
              ASCA       SIS0       NONE       NONE       PI
 RMF #    4 : rmf3.tmp                   0.05
              ASCA       SIS0       NONE       NONE       PI

-> Generating ad10012000s010102_1.arf with point=no
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 2.72  14 Mar 1997.
 
 Input WMAP array has size   39 by   40 bins
               expanded to   39 by   40 bins
 First WMAP bin is at detector pixel  472  440
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   44.686     arcmin^2
 Optical axis is detector pixel 662.72 559.02
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 4.99030E+04
 Weighted mean angle from optical axis  =  2.081 arcmin

-> Standard Output From STOOL group_event_files:

1 ad10012000s000112h.evt 303

-> Standard Output From STOOL group_event_files:

1 ad10012000s100102h.evt 162970
1 ad10012000s100202h.evt 162970
1 ad10012000s100402h.evt 162970

-> Fetching SIS1_OFFCHIP.1
-> Extracting ad10012000s110102_1.pi from ad10012000s132002_1.reg and:

ad10012000s100102h.evt
ad10012000s100202h.evt
ad10012000s100402h.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.32E+04    81884 1111
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.32E+04    81884 1111
      2 X0614+09 BRIGHT   HIGH     16/04/93 00:49:52 0.22E+04    57203 1111
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.32E+04    81884 1111
      2 X0614+09 BRIGHT   HIGH     16/04/93 00:49:52 0.22E+04    57203 1111
      3 X0614+09 BRIGHT   HIGH     16/04/93 02:39:52 0.88E+03    23883 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          81884     60154          21730         0         0         0
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          57203     42156          15047         0         0         0
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100402h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          23883     17537           6346         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        162970    119847          43123         0         0         0
   in    6249.88 seconds
 Spectrum         has   119847 counts for  19.18     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 6249.9          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 3.93066E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      12  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10012000s110102_1.pi
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          81884     60154          21730         0         0         0
 Writing events file
  60154 events written to the output file
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          57203     42156          15047         0         0         0
 Writing events file
 102310 events written to the output file
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100402h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          23883     17537           6346         0         0         0
 Writing events file
 119847 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        162970    119847          43123         0         0         0
   in    6249.88 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events ad10012000s100102h.evt
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS1-BRIGHT > read events ad10012000s100202h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS1-BRIGHT > read events ad10012000s100402h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS1-BRIGHT > set phaname PI
!xsel:ASCA-SIS1-BRIGHT > filter region ad10012000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.1
!xsel:ASCA-SIS1-BRIGHT > filter region ad10012000s110102.discrim
!xsel:ASCA-SIS1-BRIGHT > extract spectrum
!xsel:ASCA-SIS1-BRIGHT > save spectrum ad10012000s110102_1.pi group=yes
Wrote spectrum to ad10012000s110102_1.pi
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data24/seq_proc/10012000.007/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Grouping ad10012000s110102_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 6249.9          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 3.93066E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      12  of undefined grouping (Channel quality=bad)
 ...        13 -     207  are single channels
 ...       208 -     213  are grouped by a factor        2
 ...       214 -     214  are single channels
 ...       215 -     234  are grouped by a factor        2
 ...       235 -     237  are grouped by a factor        3
 ...       238 -     239  are grouped by a factor        2
 ...       240 -     242  are grouped by a factor        3
 ...       243 -     246  are grouped by a factor        2
 ...       247 -     252  are grouped by a factor        3
 ...       253 -     260  are grouped by a factor        4
 ...       261 -     266  are grouped by a factor        3
 ...       267 -     272  are grouped by a factor        6
 ...       273 -     280  are grouped by a factor        8
 ...       281 -     285  are grouped by a factor        5
 ...       286 -     292  are grouped by a factor        7
 ...       293 -     300  are grouped by a factor        8
 ...       301 -     309  are grouped by a factor        9
 ...       310 -     322  are grouped by a factor       13
 ...       323 -     342  are grouped by a factor       20
 ...       343 -     377  are grouped by a factor       35
 ...       378 -     431  are grouped by a factor       54
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10012000s110102_1.pi
 ** grppha 2.6.0 completed successfully

-> Source occupies chip(s) 0 1 2 3
-> Fetching SIS1_NOTCHIP1.1
-> Fetching SIS1_NOTCHIP2.1
-> Fetching SIS1_NOTCHIP3.1
-> Extracting spectrum from chip 0
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.62E+04   119847 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
         119847     22144          97703         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        119847     22144          97703         0         0         0
   in    6249.88 seconds
 Spectrum         has    22144 counts for  3.543     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 6249.9          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 9.50195E-03     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      12  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec0.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events events.tmp
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS1-BRIGHT > set phaname PI
!xsel:ASCA-SIS1-BRIGHT > filter region ad10012000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.1
!xsel:ASCA-SIS1-BRIGHT > filter region ad10012000s110102.discrim
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP3.1
!xsel:ASCA-SIS1-BRIGHT > extract spectrum
!xsel:ASCA-SIS1-BRIGHT > save spectrum spec0.tmp group=yes
Wrote spectrum to spec0.tmp
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Fetching sis1c0p40_290296.fits
-> Generating RMF for chip 0
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x512 S1C0 Bright PI RMF
Calibration data from ./
Please stand by...
...Done.

-> Fetching SIS1_NOTCHIP0.1
-> SIS1_NOTCHIP2.1 already present in current directory
-> SIS1_NOTCHIP3.1 already present in current directory
-> Extracting spectrum from chip 1
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.62E+04   119847 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
         119847     18266         101581         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        119847     18266         101581         0         0         0
   in    6249.88 seconds
 Spectrum         has    18266 counts for  2.923     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 6249.9          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 6.39648E-03     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      12  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec1.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events events.tmp
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS1-BRIGHT > set phaname PI
!xsel:ASCA-SIS1-BRIGHT > filter region ad10012000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.1
!xsel:ASCA-SIS1-BRIGHT > filter region ad10012000s110102.discrim
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP3.1
!xsel:ASCA-SIS1-BRIGHT > extract spectrum
!xsel:ASCA-SIS1-BRIGHT > save spectrum spec1.tmp group=yes
Wrote spectrum to spec1.tmp
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Fetching sis1c1p40_290296.fits
-> Generating RMF for chip 1
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x512 S1C1 Bright PI RMF
Calibration data from ./
Please stand by...
...Done.

-> SIS1_NOTCHIP0.1 already present in current directory
-> SIS1_NOTCHIP1.1 already present in current directory
-> SIS1_NOTCHIP3.1 already present in current directory
-> Extracting spectrum from chip 2
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.62E+04   119847 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
         119847     30259          89588         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        119847     30259          89588         0         0         0
   in    6249.88 seconds
 Spectrum         has    30259 counts for  4.842     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 6249.9          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 1.00293E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      12  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec2.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events events.tmp
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS1-BRIGHT > set phaname PI
!xsel:ASCA-SIS1-BRIGHT > filter region ad10012000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.1
!xsel:ASCA-SIS1-BRIGHT > filter region ad10012000s110102.discrim
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP3.1
!xsel:ASCA-SIS1-BRIGHT > extract spectrum
!xsel:ASCA-SIS1-BRIGHT > save spectrum spec2.tmp group=yes
Wrote spectrum to spec2.tmp
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Fetching sis1c2p40_290296.fits
-> Generating RMF for chip 2
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x512 S1C2 Bright PI RMF
Calibration data from ./
Please stand by...
...Done.

-> SIS1_NOTCHIP0.1 already present in current directory
-> SIS1_NOTCHIP1.1 already present in current directory
-> SIS1_NOTCHIP2.1 already present in current directory
-> Extracting spectrum from chip 3
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.62E+04   119847 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
         119847     49178          70669         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        119847     49178          70669         0         0         0
   in    6249.88 seconds
 Spectrum         has    49178 counts for  7.869     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 6249.9          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 1.33789E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      12  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec3.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events events.tmp
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS1-BRIGHT > set phaname PI
!xsel:ASCA-SIS1-BRIGHT > filter region ad10012000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.1
!xsel:ASCA-SIS1-BRIGHT > filter region ad10012000s110102.discrim
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT > extract spectrum
!xsel:ASCA-SIS1-BRIGHT > save spectrum spec3.tmp group=yes
Wrote spectrum to spec3.tmp
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Fetching sis1c3p40_290296.fits
-> Generating RMF for chip 3
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x512 S1C3 Bright PI RMF
Calibration data from ./
Please stand by...
...Done.

-> Chip weights:

rmf0.tmp 0.184768913698299
rmf1.tmp 0.152410990679783
rmf2.tmp 0.252480245646533
rmf3.tmp 0.410339849975385

-> Standard Output From FTOOL addrmf:

ADDRMF vers 1.10  10 April, 1997.
Summing ...
 1.848E-01 * rmf0.tmp
 1.524E-01 * rmf1.tmp
 2.525E-01 * rmf2.tmp
 4.103E-01 * rmf3.tmp
 RMF #    1 : rmf0.tmp                   0.18
              ASCA       SIS1       NONE       NONE       PI
 RMF #    2 : rmf1.tmp                   0.15
              ASCA       SIS1       NONE       NONE       PI
 RMF #    3 : rmf2.tmp                   0.25
              ASCA       SIS1       NONE       NONE       PI
 RMF #    4 : rmf3.tmp                   0.41
              ASCA       SIS1       NONE       NONE       PI

-> Generating ad10012000s110102_1.arf with point=no
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 2.72  14 Mar 1997.
 
 Input WMAP array has size   40 by   39 bins
               expanded to   40 by   39 bins
 First WMAP bin is at detector pixel  464  472
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   45.293     arcmin^2
 Optical axis is detector pixel 618.28 773.83
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 1.19712E+05
 Weighted mean angle from optical axis  =  4.096 arcmin

-> Standard Output From STOOL group_event_files:

1 ad10012000s100112h.evt 106235
1 ad10012000s100412h.evt 106235

-> SIS1_OFFCHIP.1 already present in current directory
-> Extracting ad10012000s110212_1.pi from ad10012000s132002_1.reg and:

ad10012000s100112h.evt
ad10012000s100412h.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT2  HIGH     15/04/93 21:03:28 0.32E+04    82273 1111
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT2  HIGH     15/04/93 21:03:28 0.32E+04    82273 1111
      2 X0614+09 BRIGHT2  HIGH     16/04/93 02:39:52 0.88E+03    23962 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          82273     60341          21932         0         0         0
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100412h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          23962     17612           6350         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        106235     77953          28282         0         0         0
   in    4047.91 seconds
 Spectrum         has    77953 counts for  19.26     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 4047.9          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 3.93066E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      25  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10012000s110212_1.pi
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          82273     60341          21932         0         0         0
 Writing events file
  60341 events written to the output file
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100412h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          23962     17612           6350         0         0         0
 Writing events file
  77953 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        106235     77953          28282         0         0         0
   in    4047.91 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events ad10012000s100112h.evt
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS1-BRIGHT2 > read events ad10012000s100412h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS1-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad10012000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_OFFCHIP.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad10012000s110212.discrim
!xsel:ASCA-SIS1-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS1-BRIGHT2 > save spectrum ad10012000s110212_1.pi group=yes
Wrote spectrum to ad10012000s110212_1.pi
!xsel:ASCA-SIS1-BRIGHT2 > extract events
!xsel:ASCA-SIS1-BRIGHT2 > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data24/seq_proc/10012000.007/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Grouping ad10012000s110212_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 4047.9          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 3.93066E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      25  of undefined grouping (Channel quality=bad)
 ...        26 -      27  are grouped by a factor        2
 ...        28 -     290  are single channels
 ...       291 -     292  are grouped by a factor        2
 ...       293 -     299  are single channels
 ...       300 -     301  are grouped by a factor        2
 ...       302 -     302  are single channels
 ...       303 -     304  are grouped by a factor        2
 ...       305 -     309  are single channels
 ...       310 -     311  are grouped by a factor        2
 ...       312 -     314  are single channels
 ...       315 -     316  are grouped by a factor        2
 ...       317 -     317  are single channels
 ...       318 -     319  are grouped by a factor        2
 ...       320 -     322  are single channels
 ...       323 -     324  are grouped by a factor        2
 ...       325 -     325  are single channels
 ...       326 -     331  are grouped by a factor        2
 ...       332 -     332  are single channels
 ...       333 -     336  are grouped by a factor        2
 ...       337 -     337  are single channels
 ...       338 -     339  are grouped by a factor        2
 ...       340 -     340  are single channels
 ...       341 -     384  are grouped by a factor        2
 ...       385 -     387  are grouped by a factor        3
 ...       388 -     389  are grouped by a factor        2
 ...       390 -     395  are grouped by a factor        3
 ...       396 -     401  are grouped by a factor        2
 ...       402 -     404  are grouped by a factor        3
 ...       405 -     408  are grouped by a factor        2
 ...       409 -     414  are grouped by a factor        3
 ...       415 -     416  are grouped by a factor        2
 ...       417 -     424  are grouped by a factor        4
 ...       425 -     430  are grouped by a factor        3
 ...       431 -     438  are grouped by a factor        4
 ...       439 -     443  are grouped by a factor        5
 ...       444 -     451  are grouped by a factor        4
 ...       452 -     466  are grouped by a factor        5
 ...       467 -     473  are grouped by a factor        7
 ...       474 -     479  are grouped by a factor        6
 ...       480 -     487  are grouped by a factor        8
 ...       488 -     492  are grouped by a factor        5
 ...       493 -     499  are grouped by a factor        7
 ...       500 -     507  are grouped by a factor        8
 ...       508 -     517  are grouped by a factor       10
 ...       518 -     525  are grouped by a factor        8
 ...       526 -     538  are grouped by a factor       13
 ...       539 -     553  are grouped by a factor       15
 ...       554 -     569  are grouped by a factor       16
 ...       570 -     591  are grouped by a factor       22
 ...       592 -     615  are grouped by a factor       24
 ...       616 -     659  are grouped by a factor       44
 ...       660 -     746  are grouped by a factor       87
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10012000s110212_1.pi
 ** grppha 2.6.0 completed successfully

-> Source occupies chip(s) 0 1 2 3
-> SIS1_NOTCHIP1.1 already present in current directory
-> SIS1_NOTCHIP2.1 already present in current directory
-> SIS1_NOTCHIP3.1 already present in current directory
-> Extracting spectrum from chip 0
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT2  HIGH     15/04/93 21:03:28 0.40E+04    77953 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
          77953     14239          63714         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         77953     14239          63714         0         0         0
   in    4047.91 seconds
 Spectrum         has    14239 counts for  3.518     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 4047.9          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 9.50195E-03     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      25  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec0.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events events.tmp
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS1-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad10012000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_OFFCHIP.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad10012000s110212.discrim
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP3.1
!xsel:ASCA-SIS1-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS1-BRIGHT2 > save spectrum spec0.tmp group=yes
Wrote spectrum to spec0.tmp
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> sis1c0p40_290296.fits already present in current directory
-> Generating RMF for chip 0
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x1024 S1C0 Bright2 PI RMF
Calibration data from ./
Please stand by...
...Done.

-> SIS1_NOTCHIP0.1 already present in current directory
-> SIS1_NOTCHIP2.1 already present in current directory
-> SIS1_NOTCHIP3.1 already present in current directory
-> Extracting spectrum from chip 1
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT2  HIGH     15/04/93 21:03:28 0.40E+04    77953 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
          77953     11752          66201         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         77953     11752          66201         0         0         0
   in    4047.91 seconds
 Spectrum         has    11752 counts for  2.903     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 4047.9          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 6.39648E-03     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      25  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec1.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events events.tmp
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS1-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad10012000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_OFFCHIP.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad10012000s110212.discrim
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP3.1
!xsel:ASCA-SIS1-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS1-BRIGHT2 > save spectrum spec1.tmp group=yes
Wrote spectrum to spec1.tmp
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> sis1c1p40_290296.fits already present in current directory
-> Generating RMF for chip 1
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x1024 S1C1 Bright2 PI RMF
Calibration data from ./
Please stand by...
...Done.

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT2  HIGH     15/04/93 21:03:28 0.40E+04    77953 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
          77953     20129          57824         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         77953     20129          57824         0         0         0
   in    4047.91 seconds
 Spectrum         has    20129 counts for  4.973     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 4047.9          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 1.00293E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      25  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec2.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events events.tmp
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS1-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad10012000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_OFFCHIP.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad10012000s110212.discrim
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP3.1
!xsel:ASCA-SIS1-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS1-BRIGHT2 > save spectrum spec2.tmp group=yes
Wrote spectrum to spec2.tmp
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> sis1c2p40_290296.fits already present in current directory
-> Generating RMF for chip 2
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x1024 S1C2 Bright2 PI RMF
Calibration data from ./
Please stand by...
...Done.

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT2  HIGH     15/04/93 21:03:28 0.40E+04    77953 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
          77953     31833          46120         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         77953     31833          46120         0         0         0
   in    4047.91 seconds
 Spectrum         has    31833 counts for  7.864     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 4047.9          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 1.33789E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      25  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec3.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events events.tmp
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS1-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad10012000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_OFFCHIP.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad10012000s110212.discrim
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS1-BRIGHT2 > save spectrum spec3.tmp group=yes
Wrote spectrum to spec3.tmp
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> sis1c3p40_290296.fits already present in current directory
-> Generating RMF for chip 3
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x1024 S1C3 Bright2 PI RMF
Calibration data from ./
Please stand by...
...Done.

-> Chip weights:

rmf0.tmp 0.182661347222044
rmf1.tmp 0.150757507729016
rmf2.tmp 0.258219696483779
rmf3.tmp 0.408361448565161

-> Standard Output From FTOOL addrmf:

ADDRMF vers 1.10  10 April, 1997.
Summing ...
 1.827E-01 * rmf0.tmp
 1.508E-01 * rmf1.tmp
 2.582E-01 * rmf2.tmp
 4.084E-01 * rmf3.tmp
 RMF #    1 : rmf0.tmp                   0.18
              ASCA       SIS1       NONE       NONE       PI
 RMF #    2 : rmf1.tmp                   0.15
              ASCA       SIS1       NONE       NONE       PI
 RMF #    3 : rmf2.tmp                   0.26
              ASCA       SIS1       NONE       NONE       PI
 RMF #    4 : rmf3.tmp                   0.41
              ASCA       SIS1       NONE       NONE       PI

-> Generating ad10012000s110212_1.arf with point=no
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 2.72  14 Mar 1997.
 
 Input WMAP array has size   40 by   39 bins
               expanded to   40 by   39 bins
 First WMAP bin is at detector pixel  464  472
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   45.293     arcmin^2
 Optical axis is detector pixel 618.28 773.83
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 7.78180E+04
 Weighted mean angle from optical axis  =  4.085 arcmin

-> Standard Output From STOOL group_event_files:

1 ad10012000g200170h.evt 161511
1 ad10012000g200270h.evt 161511
1 ad10012000g200370m.evt 161511

-> GIS2_REGION256_OFF.4 already present in current directory
-> Extracting ad10012000g210170_1.pi from ad10012000g225670_1.reg and:

ad10012000g200170h.evt
ad10012000g200270h.evt
ad10012000g200370m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.56E+04   131020     1024
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.56E+04   131020     1024
      2 X0614+09 PH       HIGH     16/04/93 02:40:04 0.10E+04    26031     1024
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.56E+04   131020     1024
      2 X0614+09 PH       HIGH     16/04/93 02:40:04 0.10E+04    26031     1024
      3 X0614+09 PH       MEDIUM   16/04/93 02:57:48 0.30E+03     4460     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         131020    114178          16842         0         0         0
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g200270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          26031     22749           3282         0         0         0
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g200370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4460      3923            537         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        161511    140850          20661         0         0         0
   in    6867.98 seconds
 Spectrum         has   140850 counts for  20.51     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 6868.0          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1992a           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10012000g210170_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events ad10012000g200170h.evt
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-GIS2-PH > read events ad10012000g200270h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-GIS2-PH > read events ad10012000g200370m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-GIS2-PH > set phaname PI
!xsel:ASCA-GIS2-PH > filter region ad10012000g225670_1.reg
!xsel:ASCA-GIS2-PH > filter region GIS2_REGION256_OFF.4
!xsel:ASCA-GIS2-PH > extract spectrum
!xsel:ASCA-GIS2-PH > save spectrum ad10012000g210170_1.pi group=yes
Wrote spectrum to ad10012000g210170_1.pi
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Correcting ad10012000g210170_1.pi for dead time
-> Standard Output From FTOOL deadtime:

... read all the files from deadlist.tmp

-> Grouping ad10012000g210170_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 6868.0          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - TRUE            Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      18  are grouped by a factor       19
 ...        19 -     475  are single channels
 ...       476 -     477  are grouped by a factor        2
 ...       478 -     478  are single channels
 ...       479 -     480  are grouped by a factor        2
 ...       481 -     481  are single channels
 ...       482 -     483  are grouped by a factor        2
 ...       484 -     487  are single channels
 ...       488 -     489  are grouped by a factor        2
 ...       490 -     491  are single channels
 ...       492 -     493  are grouped by a factor        2
 ...       494 -     495  are single channels
 ...       496 -     497  are grouped by a factor        2
 ...       498 -     500  are single channels
 ...       501 -     502  are grouped by a factor        2
 ...       503 -     508  are single channels
 ...       509 -     510  are grouped by a factor        2
 ...       511 -     513  are single channels
 ...       514 -     523  are grouped by a factor        2
 ...       524 -     524  are single channels
 ...       525 -     578  are grouped by a factor        2
 ...       579 -     584  are grouped by a factor        3
 ...       585 -     598  are grouped by a factor        2
 ...       599 -     601  are grouped by a factor        3
 ...       602 -     605  are grouped by a factor        2
 ...       606 -     608  are grouped by a factor        3
 ...       609 -     610  are grouped by a factor        2
 ...       611 -     616  are grouped by a factor        3
 ...       617 -     620  are grouped by a factor        2
 ...       621 -     650  are grouped by a factor        3
 ...       651 -     654  are grouped by a factor        4
 ...       655 -     656  are grouped by a factor        2
 ...       657 -     688  are grouped by a factor        4
 ...       689 -     691  are grouped by a factor        3
 ...       692 -     696  are grouped by a factor        5
 ...       697 -     700  are grouped by a factor        4
 ...       701 -     705  are grouped by a factor        5
 ...       706 -     723  are grouped by a factor        6
 ...       724 -     732  are grouped by a factor        9
 ...       733 -     740  are grouped by a factor        8
 ...       741 -     747  are grouped by a factor        7
 ...       748 -     753  are grouped by a factor        6
 ...       754 -     760  are grouped by a factor        7
 ...       761 -     766  are grouped by a factor        6
 ...       767 -     775  are grouped by a factor        9
 ...       776 -     782  are grouped by a factor        7
 ...       783 -     806  are grouped by a factor       12
 ...       807 -     815  are grouped by a factor        9
 ...       816 -     827  are grouped by a factor       12
 ...       828 -     845  are grouped by a factor       18
 ...       846 -     866  are grouped by a factor       21
 ...       867 -     886  are grouped by a factor       20
 ...       887 -     907  are grouped by a factor       21
 ...       908 -     937  are grouped by a factor       30
 ...       938 -    1023  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10012000g210170_1.pi
 ** grppha 2.6.0 completed successfully

-> Fetching gis2v4_0.rmf
-> Fetching s2bev1.fits
-> Fetching s2gridv3.fits
-> Generating ad10012000g210170_1.arf with point=yes
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 2.72  14 Mar 1997.
 
 Input WMAP array has size   49 by   49 bins
               expanded to  128 by  128 bins
 First WMAP bin is at detector pixel   62   64
   1 detector pixels per WMAP bin
 WMAP bin size is   0.25000 mm
                    0.24555 arcmin
 Selected region size is   114.65     arcmin^2
 Optical axis is detector pixel 133.00 130.96
 
  201 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Point source at  124.00  126.00 (detector coordinates)
 Point source at    9.00    4.96 (WMAP bins wrt optical axis)
 Point source at    2.52   28.86 (... in polar coordinates)
 
 Total counts in region = 1.40850E+05
 Weighted mean angle from optical axis  =  3.043 arcmin

-> Standard Output From STOOL group_event_files:

1 ad10012000g300170h.evt 165756
1 ad10012000g300270h.evt 165756
1 ad10012000g300370m.evt 165756

-> GIS3_REGION256_OFF.4 already present in current directory
-> Extracting ad10012000g310170_1.pi from ad10012000g325670_1.reg and:

ad10012000g300170h.evt
ad10012000g300270h.evt
ad10012000g300370m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.56E+04   134746     1024
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.56E+04   134746     1024
      2 X0614+09 PH       HIGH     16/04/93 02:40:04 0.10E+04    26530     1024
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.56E+04   134746     1024
      2 X0614+09 PH       HIGH     16/04/93 02:40:04 0.10E+04    26530     1024
      3 X0614+09 PH       MEDIUM   16/04/93 02:57:48 0.30E+03     4480     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         134746    119174          15572         0         0         0
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g300270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          26530     23581           2949         0         0         0
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g300370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4480      3952            528         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        165756    146707          19049         0         0         0
   in    6867.98 seconds
 Spectrum         has   146707 counts for  21.36     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 6868.0          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1992a           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10012000g310170_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events ad10012000g300170h.evt
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-GIS3-PH > read events ad10012000g300270h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-GIS3-PH > read events ad10012000g300370m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-GIS3-PH > set phaname PI
!xsel:ASCA-GIS3-PH > filter region ad10012000g325670_1.reg
!xsel:ASCA-GIS3-PH > filter region GIS3_REGION256_OFF.4
!xsel:ASCA-GIS3-PH > extract spectrum
!xsel:ASCA-GIS3-PH > save spectrum ad10012000g310170_1.pi group=yes
Wrote spectrum to ad10012000g310170_1.pi
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Correcting ad10012000g310170_1.pi for dead time
-> Standard Output From FTOOL deadtime:

... read all the files from deadlist.tmp

-> Grouping ad10012000g310170_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 6868.0          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - TRUE            Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      18  are grouped by a factor       19
 ...        19 -     471  are single channels
 ...       472 -     473  are grouped by a factor        2
 ...       474 -     478  are single channels
 ...       479 -     480  are grouped by a factor        2
 ...       481 -     491  are single channels
 ...       492 -     493  are grouped by a factor        2
 ...       494 -     502  are single channels
 ...       503 -     504  are grouped by a factor        2
 ...       505 -     505  are single channels
 ...       506 -     507  are grouped by a factor        2
 ...       508 -     511  are single channels
 ...       512 -     513  are grouped by a factor        2
 ...       514 -     517  are single channels
 ...       518 -     521  are grouped by a factor        2
 ...       522 -     522  are single channels
 ...       523 -     582  are grouped by a factor        2
 ...       583 -     585  are grouped by a factor        3
 ...       586 -     593  are grouped by a factor        2
 ...       594 -     599  are grouped by a factor        3
 ...       600 -     601  are grouped by a factor        2
 ...       602 -     604  are grouped by a factor        3
 ...       605 -     608  are grouped by a factor        2
 ...       609 -     611  are grouped by a factor        3
 ...       612 -     619  are grouped by a factor        2
 ...       620 -     640  are grouped by a factor        3
 ...       641 -     642  are grouped by a factor        2
 ...       643 -     645  are grouped by a factor        3
 ...       646 -     649  are grouped by a factor        4
 ...       650 -     652  are grouped by a factor        3
 ...       653 -     656  are grouped by a factor        4
 ...       657 -     659  are grouped by a factor        3
 ...       660 -     663  are grouped by a factor        4
 ...       664 -     673  are grouped by a factor        5
 ...       674 -     685  are grouped by a factor        4
 ...       686 -     690  are grouped by a factor        5
 ...       691 -     694  are grouped by a factor        4
 ...       695 -     704  are grouped by a factor        5
 ...       705 -     708  are grouped by a factor        4
 ...       709 -     723  are grouped by a factor        5
 ...       724 -     729  are grouped by a factor        6
 ...       730 -     744  are grouped by a factor        5
 ...       745 -     750  are grouped by a factor        6
 ...       751 -     766  are grouped by a factor        8
 ...       767 -     784  are grouped by a factor        9
 ...       785 -     800  are grouped by a factor        8
 ...       801 -     810  are grouped by a factor       10
 ...       811 -     823  are grouped by a factor       13
 ...       824 -     837  are grouped by a factor       14
 ...       838 -     852  are grouped by a factor       15
 ...       853 -     870  are grouped by a factor       18
 ...       871 -     884  are grouped by a factor       14
 ...       885 -     905  are grouped by a factor       21
 ...       906 -     942  are grouped by a factor       37
 ...       943 -    1023  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10012000g310170_1.pi
 ** grppha 2.6.0 completed successfully

-> Fetching gis3v4_0.rmf
-> Fetching s3bev1.fits
-> Fetching s3gridv3.fits
-> Generating ad10012000g310170_1.arf with point=yes
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 2.72  14 Mar 1997.
 
 Input WMAP array has size   49 by   49 bins
               expanded to  128 by  128 bins
 First WMAP bin is at detector pixel   68   64
   1 detector pixels per WMAP bin
 WMAP bin size is   0.25000 mm
                    0.24555 arcmin
 Selected region size is   114.65     arcmin^2
 Optical axis is detector pixel 119.36 134.44
 
  201 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Point source at  130.00  126.00 (detector coordinates)
 Point source at  -10.64    8.44 (WMAP bins wrt optical axis)
 Point source at    3.33  141.58 (... in polar coordinates)
 
 Total counts in region = 1.46707E+05
 Weighted mean angle from optical axis  =  3.781 arcmin

-> Plotting ad10012000g210170_1_pi.ps from ad10012000g210170_1.pi
-> Standard Output From STOOL xspec:

 
               XSPEC 9.01 23:30:30 11-Mar-98
 
 Plot device not set, use "cpd" to set it
 
 Type "help" or "?" for further information
!XSPEC> data ad10012000g210170_1.pi
 Net count rate (cts/s) for file   1   20.51    +/-  5.4661E-02
   1 data set is in use
!XSPEC> setplot energy
!XSPEC> ignore bad
!XSPEC> iplot
!PLT> log y on
!PLT> rescale y
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
 XSPEC: quit

-> Plotting ad10012000g310170_1_pi.ps from ad10012000g310170_1.pi
-> Standard Output From STOOL xspec:

 
               XSPEC 9.01 23:30:44 11-Mar-98
 
 Plot device not set, use "cpd" to set it
 
 Type "help" or "?" for further information
!XSPEC> data ad10012000g310170_1.pi
 Net count rate (cts/s) for file   1   21.36    +/-  5.5784E-02
   1 data set is in use
!XSPEC> setplot energy
!XSPEC> ignore bad
!XSPEC> iplot
!PLT> log y on
!PLT> rescale y
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
 XSPEC: quit

-> Plotting ad10012000s010102_1_pi.ps from ad10012000s010102_1.pi
-> Standard Output From STOOL xspec:

 
               XSPEC 9.01 23:30:55 11-Mar-98
 
 Plot device not set, use "cpd" to set it
 
 Type "help" or "?" for further information
!XSPEC> data ad10012000s010102_1.pi
 Net count rate (cts/s) for file   1   22.85    +/-  0.1023
   1 data set is in use
!XSPEC> setplot energy
!XSPEC> ignore bad
!XSPEC> iplot
!PLT> log y on
!PLT> rescale y
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
 XSPEC: quit

-> Plotting ad10012000s110102_1_pi.ps from ad10012000s110102_1.pi
-> Standard Output From STOOL xspec:

 
               XSPEC 9.01 23:31:06 11-Mar-98
 
 Plot device not set, use "cpd" to set it
 
 Type "help" or "?" for further information
!XSPEC> data ad10012000s110102_1.pi
 Net count rate (cts/s) for file   1   19.18    +/-  5.5394E-02
   1 data set is in use
!XSPEC> setplot energy
!XSPEC> ignore bad
!XSPEC> iplot
!PLT> log y on
!PLT> rescale y
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
 XSPEC: quit

-> Plotting ad10012000s110212_1_pi.ps from ad10012000s110212_1.pi
-> Standard Output From STOOL xspec:

 
               XSPEC 9.01 23:31:17 11-Mar-98
 
 Plot device not set, use "cpd" to set it
 
 Type "help" or "?" for further information
!XSPEC> data ad10012000s110212_1.pi
 Net count rate (cts/s) for file   1   19.26    +/-  6.8984E-02
   1 data set is in use
!XSPEC> setplot energy
!XSPEC> ignore bad
!XSPEC> iplot
!PLT> log y on
!PLT> rescale y
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
 XSPEC: quit

Extracting light curves ( 23:31:26 )

-> TIMEDEL=1.6000000000E+01 for ad10012000s000102h.evt
-> TIMEDEL=1.6000000000E+01 for ad10012000s000202h.evt
-> Minimum bin size is 1.6000000000E+01 seconds
-> Extracting events from region ad10012000s032002_1.reg
-> ... and files: ad10012000s000102h.evt ad10012000s000202h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.14E+02      301 1111
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.14E+02      301 1111
      2 X0614+09 BRIGHT   HIGH     16/04/93 00:49:08 0.22E+04    65766 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            301       169            132         0         0         0
 Writing events file
    169 events written to the output file
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s000202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          65766     51545          14221         0         0         0
 Writing events file
  51714 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         66067     51714          14353         0         0         0
   in    2189.93 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events ad10012000s000102h.evt
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS0-BRIGHT > read events ad10012000s000202h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS0-BRIGHT > filter region ad10012000s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data24/seq_proc/10012000.007/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Extracting ad10012000s000002_1.lc with binsize 1.6000000000E+01
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.22E+04    51714 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
          51714     51714              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         51714     51714              0         0         0         0
   in    2189.93 seconds
 Fits light curve has    51714 counts for  23.61     counts/sec
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events events.tmp
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS0-BRIGHT > set binsize 1.6000000000E+01
!xsel:ASCA-SIS0-BRIGHT > extract curve exposure=0.5
!xsel:ASCA-SIS0-BRIGHT > save curve ad10012000s000002_1.lc
Wrote FITS light curve to file ad10012000s000002_1.lc
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Plotting light curve ad10012000s000002_1_lc.ps
-> Standard Output From FTOOL xronos:


                                                     Type "help" for information


 [1]xronos>   Current User Interface is ;           command driven                          
 [2]xronos>       Enter up to  50 input filenames and options for series 1 (or rtn)    
      Ser. A filename   1 +options[.rbf]=> ad10012000s000002_1.lc                                                                                                              
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ X0614+091           Start Time (d) ....  9092 23:46:36.204
 FITS Extension ....  1 - `RATE      `   Stop Time (d) .....  9093 01:31:40.204
 No. of Rows .......          137        Bin Time (s) ......    16.00
 Right Ascension ... 9.4278E+01          Internal time sys.. Converted to TJD
 Declination ....... 9.1392E+00          Experiment ........ ASCA     SIS0
 
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:   1 - Time;   2 - Y-axis;   3 - Y-error;
 
 File contains binned data.
 
      Ser. A filename   2 +options[.rbf]=>                                                                                                                                     
      Enter up to  50 input filenames and options for series 2 (or rtn)    
      Ser. B filename   1 +options[.rbf]=>                                                                                                                                     
      Enter up to  50 input filenames and options for series 3 (or rtn)    
      Ser. C filename   1 +options[.rbf]=>                                                                                                                                     
 [3]xronos> 
 Maximum of      1 Intvs. with       395 Newbins of       16.0000     (s) 

 
 Intv    1   Start 9092 23:46:44
     Ser.1     Avg  23.60        Chisq  242.9       Var  2.617     Newbs.   137
               Min  12.13          Max  26.19    expVar  1.476      Bins    137

             Results from Statistical Analysis

             Newbin Integration Time (s)..  16.000    
             Interval Duration (s)........  6288.0    
             No. of Newbins ..............     137
             Average (c/s) ...............  23.604      +/-    0.10    
             Standard Deviation (c/s).....  1.6176    
             Minimum (c/s)................  12.131    
             Maximum (c/s)................  26.188    
             Variance ((c/s)**2)..........  2.6165     +/-    0.32    
             Expected Variance ((c/s)**2).  1.4760     +/-    0.18    
             Third Moment ((c/s)**3)...... -12.109    
             Average Deviation (c/s)......  1.0539    
             Skewness..................... -2.8610        +/-    0.21    
             Kurtosis.....................  17.148        +/-    0.42    
             RMS fractional variation..... 0.45244E-01    +/-    0.63E-02
             Chi-Square...................  242.85        dof     136
             Chi-Square Prob of constancy. 0.49159E-07 (0 means < 1.e-38)
             Kolm.-Smir. Prob of constancy 0.12589E-02 (0 means < 1.e-38)

 [4]xronos>  [5]xronos> 
 Maximum of      1 Intvs. with       395 Newbins of       16.0000     (s) 

 
 Intv    1   Start 9092 23:46:44
     Ser.1     Avg  23.60        Chisq  242.9       Var  2.617     Newbs.   137
               Min  12.13          Max  26.19    expVar  1.476      Bins    137
             Light curve ready !
 Frme    1  Written to output file : xronos.qlc1                                                                                                                         
 PLT>  PLT>  PLT>  [6]xronos>

-> TIMEDEL=1.6000000000E+01 for ad10012000s100102h.evt
-> TIMEDEL=1.6000000000E+01 for ad10012000s100202h.evt
-> TIMEDEL=1.6000000000E+01 for ad10012000s100402h.evt
-> Minimum bin size is 1.6000000000E+01 seconds
-> Extracting events from region ad10012000s132002_1.reg
-> ... and files: ad10012000s100102h.evt ad10012000s100202h.evt ad10012000s100402h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.32E+04    81884 1111
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.32E+04    81884 1111
      2 X0614+09 BRIGHT   HIGH     16/04/93 00:49:52 0.22E+04    57203 1111
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.32E+04    81884 1111
      2 X0614+09 BRIGHT   HIGH     16/04/93 00:49:52 0.22E+04    57203 1111
      3 X0614+09 BRIGHT   HIGH     16/04/93 02:39:52 0.88E+03    23883 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          81884     61330          20554         0         0         0
 Writing events file
  61330 events written to the output file
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          57203     43016          14187         0         0         0
 Writing events file
 104346 events written to the output file
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100402h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          23883     17902           5981         0         0         0
 Writing events file
 122248 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        162970    122248          40722         0         0         0
   in    6249.88 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events ad10012000s100102h.evt
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS1-BRIGHT > read events ad10012000s100202h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS1-BRIGHT > read events ad10012000s100402h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS1-BRIGHT > filter region ad10012000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data24/seq_proc/10012000.007/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Extracting ad10012000s100002_1.lc with binsize 1.6000000000E+01
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.62E+04   122248 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
         122248    122248              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        122248    122248              0         0         0         0
   in    6249.88 seconds
 Fits light curve has   122248 counts for  19.56     counts/sec
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events events.tmp
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS1-BRIGHT > set binsize 1.6000000000E+01
!xsel:ASCA-SIS1-BRIGHT > extract curve exposure=0.5
!xsel:ASCA-SIS1-BRIGHT > save curve ad10012000s100002_1.lc
Wrote FITS light curve to file ad10012000s100002_1.lc
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Plotting light curve ad10012000s100002_1_lc.ps
-> Standard Output From FTOOL xronos:


                                                     Type "help" for information


 [1]xronos>   Current User Interface is ;           command driven                          
 [2]xronos>       Enter up to  50 input filenames and options for series 1 (or rtn)    
      Ser. A filename   1 +options[.rbf]=> ad10012000s100002_1.lc                                                                                                              
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ X0614+091           Start Time (d) ....  9092 21:48:44.204
 FITS Extension ....  1 - `RATE      `   Stop Time (d) .....  9093 02:56:24.129
 No. of Rows .......          391        Bin Time (s) ......    16.00
 Right Ascension ... 9.4278E+01          Internal time sys.. Converted to TJD
 Declination ....... 9.1392E+00          Experiment ........ ASCA     SIS1
 
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:   1 - Time;   2 - Y-axis;   3 - Y-error;
 
 File contains binned data.
 
      Ser. A filename   2 +options[.rbf]=>                                                                                                                                     
      Enter up to  50 input filenames and options for series 2 (or rtn)    
      Ser. B filename   1 +options[.rbf]=>                                                                                                                                     
      Enter up to  50 input filenames and options for series 3 (or rtn)    
      Ser. C filename   1 +options[.rbf]=>                                                                                                                                     
 [3]xronos> 
 Maximum of      1 Intvs. with       512 Newbins of       36.0968     (s) 

 
 Intv    1   Start 9092 21:49: 2
     Ser.1     Avg  19.60        Chisq  236.9       Var  1.241     Newbs.   181
               Min  15.50          Max  28.60    expVar 0.6190      Bins    391

             Results from Statistical Analysis

             Newbin Integration Time (s)..  36.097    
             Interval Duration (s)........  18445.    
             No. of Newbins ..............     181
             Average (c/s) ...............  19.599      +/-    0.59E-01
             Standard Deviation (c/s).....  1.1141    
             Minimum (c/s)................  15.504    
             Maximum (c/s)................  28.603    
             Variance ((c/s)**2)..........  1.2412     +/-    0.13    
             Expected Variance ((c/s)**2). 0.61897     +/-    0.65E-01
             Third Moment ((c/s)**3)......  3.5468    
             Average Deviation (c/s)...... 0.74177    
             Skewness.....................  2.5648        +/-    0.18    
             Kurtosis.....................  22.475        +/-    0.36    
             RMS fractional variation..... 0.40248E-01    +/-    0.42E-02
             Chi-Square...................  236.94        dof     180
             Chi-Square Prob of constancy. 0.28285E-02 (0 means < 1.e-38)
             Kolm.-Smir. Prob of constancy 0.33095E-10 (0 means < 1.e-38)

 [4]xronos>  [5]xronos> 
 Maximum of      1 Intvs. with       512 Newbins of       36.0968     (s) 

 
 Intv    1   Start 9092 21:49: 2
     Ser.1     Avg  19.60        Chisq  236.9       Var  1.241     Newbs.   181
               Min  15.50          Max  28.60    expVar 0.6190      Bins    391
             Light curve ready !
 Frme    1  Written to output file : xronos.qlc1                                                                                                                         
 PLT>  PLT>  PLT>  [6]xronos>

-> TIMEDEL=6.2500000000E-02 for ad10012000g200170h.evt
-> TIMEDEL=6.2500000000E-02 for ad10012000g200270h.evt
-> TIMEDEL=5.0000000000E-01 for ad10012000g200370m.evt
-> Minimum bin size is 5.0000000000E-01 seconds
-> Extracting events from region ad10012000g225670_1.reg
-> ... and files: ad10012000g200170h.evt ad10012000g200270h.evt ad10012000g200370m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.56E+04   131020     1024
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.56E+04   131020     1024
      2 X0614+09 PH       HIGH     16/04/93 02:40:04 0.10E+04    26031     1024
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.56E+04   131020     1024
      2 X0614+09 PH       HIGH     16/04/93 02:40:04 0.10E+04    26031     1024
      3 X0614+09 PH       MEDIUM   16/04/93 02:57:48 0.30E+03     4460     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         131020    114178          16842         0         0         0
 Writing events file
 114178 events written to the output file
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g200270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          26031     22749           3282         0         0         0
 Writing events file
 136927 events written to the output file
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g200370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4460      3923            537         0         0         0
 Writing events file
 140850 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        161511    140850          20661         0         0         0
   in    6867.98 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events ad10012000g200170h.evt
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-GIS2-PH > read events ad10012000g200270h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-GIS2-PH > read events ad10012000g200370m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-GIS2-PH > filter region ad10012000g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data24/seq_proc/10012000.007/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting ad10012000g200070_1.lc with binsize 2.43804775795611
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.69E+04   140850     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
         140850    140850              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        140850    140850              0         0         0         0
   in    6867.98 seconds
 Fits light curve has   140850 counts for  20.51     counts/sec
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events events.tmp
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-GIS2-PH > set binsize 2.43804775795611
!xsel:ASCA-GIS2-PH > extract curve exposure=0.5
!xsel:ASCA-GIS2-PH > save curve ad10012000g200070_1.lc
Wrote FITS light curve to file ad10012000g200070_1.lc
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Plotting light curve ad10012000g200070_1_lc.ps
-> Standard Output From FTOOL xronos:


                                                     Type "help" for information


 [1]xronos>   Current User Interface is ;           command driven                          
 [2]xronos>       Enter up to  50 input filenames and options for series 1 (or rtn)    
      Ser. A filename   1 +options[.rbf]=> ad10012000g200070_1.lc                                                                                                              
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ X0614+091           Start Time (d) ....  9092 21:50:20.204
 FITS Extension ....  1 - `RATE      `   Stop Time (d) .....  9093 03:05:48.123
 No. of Rows .......         2819        Bin Time (s) ......    2.438
 Right Ascension ... 9.4278E+01          Internal time sys.. Converted to TJD
 Declination ....... 9.1392E+00          Experiment ........ ASCA     GIS2
 
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:   1 - Time;   2 - Y-axis;   3 - Y-error;
 
 File contains binned data.
 
      Ser. A filename   2 +options[.rbf]=>                                                                                                                                     
      Enter up to  50 input filenames and options for series 2 (or rtn)    
      Ser. B filename   1 +options[.rbf]=>                                                                                                                                     
      Enter up to  50 input filenames and options for series 3 (or rtn)    
      Ser. C filename   1 +options[.rbf]=>                                                                                                                                     
 [3]xronos> 
 Maximum of      1 Intvs. with       512 Newbins of       37.0120     (s) 

 
 Intv    1   Start 9092 21:50:38
     Ser.1     Avg  20.35        Chisq  1118.       Var  5.105     Newbs.   198
               Min  12.36          Max  23.87    expVar 0.6396      Bins   2819

             Results from Statistical Analysis

             Newbin Integration Time (s)..  37.012    
             Interval Duration (s)........  18913.    
             No. of Newbins ..............     198
             Average (c/s) ...............  20.349      +/-    0.57E-01
             Standard Deviation (c/s).....  2.2595    
             Minimum (c/s)................  12.356    
             Maximum (c/s)................  23.872    
             Variance ((c/s)**2)..........  5.1053     +/-    0.51    
             Expected Variance ((c/s)**2). 0.63963     +/-    0.64E-01
             Third Moment ((c/s)**3)...... -24.347    
             Average Deviation (c/s)......  1.4425    
             Skewness..................... -2.1106        +/-    0.17    
             Kurtosis.....................  4.9085        +/-    0.35    
             RMS fractional variation..... 0.10385        +/-    0.60E-02
             Chi-Square...................  1118.4        dof     197
             Chi-Square Prob of constancy.      0.     (0 means < 1.e-38)
             Kolm.-Smir. Prob of constancy 0.16773E-33 (0 means < 1.e-38)

 [4]xronos>  [5]xronos> 
 Maximum of      1 Intvs. with       512 Newbins of       37.0120     (s) 

 
 Intv    1   Start 9092 21:50:38
     Ser.1     Avg  20.35        Chisq  1118.       Var  5.105     Newbs.   198
               Min  12.36          Max  23.87    expVar 0.6396      Bins   2819
             Light curve ready !
 Frme    1  Written to output file : xronos.qlc1                                                                                                                         
 PLT>  PLT>  PLT>  [6]xronos>

-> Standard Error Output From FTOOL xronos

 Note: the following IEEE floating-point arithmetic exceptions 
 occurred and were never cleared; see ieee_flags(3M): 
 Inexact;  Underflow; 
 Sun's implementation of IEEE arithmetic is discussed in 
 the Numerical Computation Guide.

-> TIMEDEL=6.2500000000E-02 for ad10012000g300170h.evt
-> TIMEDEL=6.2500000000E-02 for ad10012000g300270h.evt
-> TIMEDEL=5.0000000000E-01 for ad10012000g300370m.evt
-> Minimum bin size is 5.0000000000E-01 seconds
-> Extracting events from region ad10012000g325670_1.reg
-> ... and files: ad10012000g300170h.evt ad10012000g300270h.evt ad10012000g300370m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.56E+04   134746     1024
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.56E+04   134746     1024
      2 X0614+09 PH       HIGH     16/04/93 02:40:04 0.10E+04    26530     1024
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.56E+04   134746     1024
      2 X0614+09 PH       HIGH     16/04/93 02:40:04 0.10E+04    26530     1024
      3 X0614+09 PH       MEDIUM   16/04/93 02:57:48 0.30E+03     4480     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         134746    119174          15572         0         0         0
 Writing events file
 119174 events written to the output file
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g300270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          26530     23581           2949         0         0         0
 Writing events file
 142755 events written to the output file
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g300370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4480      3952            528         0         0         0
 Writing events file
 146707 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        165756    146707          19049         0         0         0
   in    6867.98 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events ad10012000g300170h.evt
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-GIS3-PH > read events ad10012000g300270h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-GIS3-PH > read events ad10012000g300370m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-GIS3-PH > filter region ad10012000g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data24/seq_proc/10012000.007/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting ad10012000g300070_1.lc with binsize 2.34071330412399
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.69E+04   146707     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
         146707    146707              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        146707    146707              0         0         0         0
   in    6867.98 seconds
 Fits light curve has   146707 counts for  21.36     counts/sec
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events events.tmp
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-GIS3-PH > set binsize 2.34071330412399
!xsel:ASCA-GIS3-PH > extract curve exposure=0.5
!xsel:ASCA-GIS3-PH > save curve ad10012000g300070_1.lc
Wrote FITS light curve to file ad10012000g300070_1.lc
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Plotting light curve ad10012000g300070_1_lc.ps
-> Standard Output From FTOOL xronos:


                                                     Type "help" for information


 [1]xronos>   Current User Interface is ;           command driven                          
 [2]xronos>       Enter up to  50 input filenames and options for series 1 (or rtn)    
      Ser. A filename   1 +options[.rbf]=> ad10012000g300070_1.lc                                                                                                              
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ X0614+091           Start Time (d) ....  9092 21:50:20.204
 FITS Extension ....  1 - `RATE      `   Stop Time (d) .....  9093 03:05:48.123
 No. of Rows .......         2931        Bin Time (s) ......    2.341
 Right Ascension ... 9.4278E+01          Internal time sys.. Converted to TJD
 Declination ....... 9.1392E+00          Experiment ........ ASCA     GIS3
 
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:   1 - Time;   2 - Y-axis;   3 - Y-error;
 
 File contains binned data.
 
      Ser. A filename   2 +options[.rbf]=>                                                                                                                                     
      Enter up to  50 input filenames and options for series 2 (or rtn)    
      Ser. B filename   1 +options[.rbf]=>                                                                                                                                     
      Enter up to  50 input filenames and options for series 3 (or rtn)    
      Ser. C filename   1 +options[.rbf]=>                                                                                                                                     
 [3]xronos> 
 Maximum of      1 Intvs. with       512 Newbins of       37.0120     (s) 

 
 Intv    1   Start 9092 21:50:38
     Ser.1     Avg  21.18        Chisq  1217.       Var  6.024     Newbs.   198
               Min  11.53          Max  24.84    expVar 0.6610      Bins   2931

             Results from Statistical Analysis

             Newbin Integration Time (s)..  37.012    
             Interval Duration (s)........  18913.    
             No. of Newbins ..............     198
             Average (c/s) ...............  21.184      +/-    0.58E-01
             Standard Deviation (c/s).....  2.4543    
             Minimum (c/s)................  11.535    
             Maximum (c/s)................  24.836    
             Variance ((c/s)**2)..........  6.0235     +/-    0.61    
             Expected Variance ((c/s)**2). 0.66100     +/-    0.67E-01
             Third Moment ((c/s)**3)...... -33.656    
             Average Deviation (c/s)......  1.5067    
             Skewness..................... -2.2766        +/-    0.17    
             Kurtosis.....................  5.5375        +/-    0.35    
             RMS fractional variation..... 0.10932        +/-    0.62E-02
             Chi-Square...................  1216.9        dof     197
             Chi-Square Prob of constancy.      0.     (0 means < 1.e-38)
             Kolm.-Smir. Prob of constancy 0.58754E-38 (0 means < 1.e-38)

 [4]xronos>  [5]xronos> 
 Maximum of      1 Intvs. with       512 Newbins of       37.0120     (s) 

 
 Intv    1   Start 9092 21:50:38
     Ser.1     Avg  21.18        Chisq  1217.       Var  6.024     Newbs.   198
               Min  11.53          Max  24.84    expVar 0.6610      Bins   2931
             Light curve ready !
 Frme    1  Written to output file : xronos.qlc1                                                                                                                         
 PLT>  PLT>  PLT>  [6]xronos>

-> Standard Error Output From FTOOL xronos

 Note: the following IEEE floating-point arithmetic exceptions 
 occurred and were never cleared; see ieee_flags(3M): 
 Inexact;  Underflow; 
 Sun's implementation of IEEE arithmetic is discussed in 
 the Numerical Computation Guide.

-> Merging GTIs from the following files:

ad10012000g200170h.evt[2]
ad10012000g200270h.evt[2]
ad10012000g200370m.evt[2]

-> Making L1 light curve of ft930415_2053_0240G2HK.fits with irate=HIGH
-> Standard Output From FTOOL ghkcurve:

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  42743 output records from   42754  good input G2_L1    records.

-> Making L1 light curve of ft930415_2053_0240G2HK.fits with irate=HI+MED
-> Standard Output From FTOOL ghkcurve:

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:   5545 output records from   42754  good input G2_L1    records.

-> Making L1 light curve of ft930416_0239_0325G2HK.fits with irate=HIGH
-> Standard Output From FTOOL ghkcurve:

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:   7849 output records from    7855  good input G2_L1    records.

-> Making L1 light curve of ft930416_0239_0325G2HK.fits with irate=HI+MED
-> Standard Output From FTOOL ghkcurve:

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:   1301 output records from    8159  good input G2_L1    records.

-> Merging GTIs from the following files:

ad10012000g300170h.evt[2]
ad10012000g300270h.evt[2]
ad10012000g300370m.evt[2]

-> Making L1 light curve of ft930415_2053_0240G3HK.fits with irate=HIGH
-> Standard Output From FTOOL ghkcurve:

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  42898 output records from   42909  good input G3_L1    records.

-> Making L1 light curve of ft930415_2053_0240G3HK.fits with irate=HI+MED
-> Standard Output From FTOOL ghkcurve:

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:   5544 output records from   42909  good input G3_L1    records.

-> Making L1 light curve of ft930416_0239_0325G3HK.fits with irate=HIGH
-> Standard Output From FTOOL ghkcurve:

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:   7871 output records from    7877  good input G3_L1    records.

-> Making L1 light curve of ft930416_0239_0325G3HK.fits with irate=HI+MED
-> Standard Output From FTOOL ghkcurve:

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:   1300 output records from    8180  good input G3_L1    records.

Extracting source event files ( 23:41:04 )

-> Extracting unbinned light curve ad10012000g200170h_1.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.56E+04   131020     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         131020    114178          16842         0         0         0
 Writing events file
 114178 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        131020    114178          16842         0         0         0
   in    5553.98 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events ad10012000g200170h.evt
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-GIS2-PH > filter region ad10012000g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad10012000g200170h_1.ulc use_events=yes
Wrote events list to file ad10012000g200170h_1.ulc
Changing Data directory from:
    /data/data24/seq_proc/10012000.007/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting unbinned light curve ad10012000g200270h_1.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     16/04/93 02:40:04 0.10E+04    26031     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g200270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          26031     22749           3282         0         0         0
 Writing events file
  22749 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         26031     22749           3282         0         0         0
   in    1010.00 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events ad10012000g200270h.evt
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-GIS2-PH > filter region ad10012000g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad10012000g200270h_1.ulc use_events=yes
Wrote events list to file ad10012000g200270h_1.ulc
Changing Data directory from:
    /data/data24/seq_proc/10012000.007/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting unbinned light curve ad10012000g200370m_1.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       MEDIUM   16/04/93 02:57:48 0.30E+03     4460     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g200370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4460      3923            537         0         0         0
 Writing events file
   3923 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4460      3923            537         0         0         0
   in     304.00 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events ad10012000g200370m.evt
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-GIS2-PH > filter region ad10012000g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad10012000g200370m_1.ulc use_events=yes
Wrote events list to file ad10012000g200370m_1.ulc
Changing Data directory from:
    /data/data24/seq_proc/10012000.007/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting unbinned light curve ad10012000g300170h_1.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.56E+04   134746     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         134746    119174          15572         0         0         0
 Writing events file
 119174 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        134746    119174          15572         0         0         0
   in    5553.98 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events ad10012000g300170h.evt
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-GIS3-PH > filter region ad10012000g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad10012000g300170h_1.ulc use_events=yes
Wrote events list to file ad10012000g300170h_1.ulc
Changing Data directory from:
    /data/data24/seq_proc/10012000.007/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting unbinned light curve ad10012000g300270h_1.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     16/04/93 02:40:04 0.10E+04    26530     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g300270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          26530     23581           2949         0         0         0
 Writing events file
  23581 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         26530     23581           2949         0         0         0
   in    1010.00 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events ad10012000g300270h.evt
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-GIS3-PH > filter region ad10012000g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad10012000g300270h_1.ulc use_events=yes
Wrote events list to file ad10012000g300270h_1.ulc
Changing Data directory from:
    /data/data24/seq_proc/10012000.007/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting unbinned light curve ad10012000g300370m_1.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       MEDIUM   16/04/93 02:57:48 0.30E+03     4480     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g300370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4480      3952            528         0         0         0
 Writing events file
   3952 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4480      3952            528         0         0         0
   in     304.00 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events ad10012000g300370m.evt
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-GIS3-PH > filter region ad10012000g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad10012000g300370m_1.ulc use_events=yes
Wrote events list to file ad10012000g300370m_1.ulc
Changing Data directory from:
    /data/data24/seq_proc/10012000.007/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting unbinned light curve ad10012000s000102h_1.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.14E+02      301 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            301       169            132         0         0         0
 Writing events file
    169 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           301       169            132         0         0         0
   in      13.93 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events ad10012000s000102h.evt
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS0-BRIGHT > filter region ad10012000s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=ad10012000s000102h_1.ulc use_events=yes
Wrote events list to file ad10012000s000102h_1.ulc
Changing Data directory from:
    /data/data24/seq_proc/10012000.007/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Extracting unbinned light curve ad10012000s000112h_1.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT2  HIGH     15/04/93 21:03:28 0.14E+02      303 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s000112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            303       171            132         0         0         0
 Writing events file
    171 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           303       171            132         0         0         0
   in      13.93 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events ad10012000s000112h.evt
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad10012000s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT2 > extract events
!xsel:ASCA-SIS0-BRIGHT2 > save events outfile=ad10012000s000112h_1.ulc use_events=yes
Wrote events list to file ad10012000s000112h_1.ulc
Changing Data directory from:
    /data/data24/seq_proc/10012000.007/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Extracting unbinned light curve ad10012000s000202h_1.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT   HIGH     16/04/93 00:49:08 0.22E+04    65766 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s000202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          65766     51545          14221         0         0         0
 Writing events file
  51545 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         65766     51545          14221         0         0         0
   in    2176.00 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events ad10012000s000202h.evt
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS0-BRIGHT > filter region ad10012000s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=ad10012000s000202h_1.ulc use_events=yes
Wrote events list to file ad10012000s000202h_1.ulc
Changing Data directory from:
    /data/data24/seq_proc/10012000.007/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Extracting unbinned light curve ad10012000s100102h_1.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.32E+04    81884 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          81884     61330          20554         0         0         0
 Writing events file
  61330 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         81884     61330          20554         0         0         0
   in    3169.94 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events ad10012000s100102h.evt
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS1-BRIGHT > filter region ad10012000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=ad10012000s100102h_1.ulc use_events=yes
Wrote events list to file ad10012000s100102h_1.ulc
Changing Data directory from:
    /data/data24/seq_proc/10012000.007/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Extracting unbinned light curve ad10012000s100112h_1.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT2  HIGH     15/04/93 21:03:28 0.32E+04    82273 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          82273     61513          20760         0         0         0
 Writing events file
  61513 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         82273     61513          20760         0         0         0
   in    3169.94 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events ad10012000s100112h.evt
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad10012000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > extract events
!xsel:ASCA-SIS1-BRIGHT2 > save events outfile=ad10012000s100112h_1.ulc use_events=yes
Wrote events list to file ad10012000s100112h_1.ulc
Changing Data directory from:
    /data/data24/seq_proc/10012000.007/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Extracting unbinned light curve ad10012000s100202h_1.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT   HIGH     16/04/93 00:49:52 0.22E+04    57203 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          57203     43016          14187         0         0         0
 Writing events file
  43016 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         57203     43016          14187         0         0         0
   in    2201.97 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events ad10012000s100202h.evt
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS1-BRIGHT > filter region ad10012000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=ad10012000s100202h_1.ulc use_events=yes
Wrote events list to file ad10012000s100202h_1.ulc
Changing Data directory from:
    /data/data24/seq_proc/10012000.007/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Extracting unbinned light curve ad10012000s100402h_1.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT   HIGH     16/04/93 02:39:52 0.88E+03    23883 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100402h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          23883     17902           5981         0         0         0
 Writing events file
  17902 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         23883     17902           5981         0         0         0
   in     877.97 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events ad10012000s100402h.evt
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS1-BRIGHT > filter region ad10012000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=ad10012000s100402h_1.ulc use_events=yes
Wrote events list to file ad10012000s100402h_1.ulc
Changing Data directory from:
    /data/data24/seq_proc/10012000.007/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Extracting unbinned light curve ad10012000s100412h_1.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT2  HIGH     16/04/93 02:39:52 0.88E+03    23962 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100412h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          23962     17968           5994         0         0         0
 Writing events file
  17968 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         23962     17968           5994         0         0         0
   in     877.97 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events ad10012000s100412h.evt
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad10012000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > extract events
!xsel:ASCA-SIS1-BRIGHT2 > save events outfile=ad10012000s100412h_1.ulc use_events=yes
Wrote events list to file ad10012000s100412h_1.ulc
Changing Data directory from:
    /data/data24/seq_proc/10012000.007/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

Extracting FRAME mode data ( 23:48:58 )

-> Extracting frame mode data from ft930415_2053.0240
-> Standard Output From STOOL tlmFrm:

 *** tlmFrm Version 1.1 (1997-08-25) *** 
total number of superframes: 7216

Total of 0 sets of frame data are extracted.

-> Extracting frame mode data from ft930416_0239.0325
-> Standard Output From STOOL tlmFrm:

 *** tlmFrm Version 1.1 (1997-08-25) *** 
total number of superframes: 615

Total of 0 sets of frame data are extracted.

Extracting GIS calibration source spectra ( 23:49:27 )

-> Standard Output From STOOL group_event_files:

1 ad10012000g200170h.unf 212313
1 ad10012000g200270h.unf 212313
1 ad10012000g200370m.unf 212313

-> Fetching GIS2_CALSRC256.2
-> Extracting ad10012000g220170.cal from ad10012000g200170h.unf ad10012000g200270h.unf ad10012000g200370m.unf
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.13E+05   178048     1024
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.13E+05   178048     1024
      2 X0614+09 PH       HIGH     16/04/93 02:40:04 0.10E+04    28126     1024
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.13E+05   178048     1024
      2 X0614+09 PH       HIGH     16/04/93 02:40:04 0.10E+04    28126     1024
      3 X0614+09 PH       MEDIUM   16/04/93 02:57:48 0.61E+03     6139     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         178048      5964         172084         0         0         0
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g200270h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          28126       484          27642         0         0         0
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g200370m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           6139       104           6035         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        212313      6552         205761         0         0         0
   in   14841.95 seconds
 Spectrum         has     6552 counts for 0.4415     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 14842.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 3.57971E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1992a           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10012000g220170.cal
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events ad10012000g200170h.unf
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-GIS2-PH > read events ad10012000g200270h.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-GIS2-PH > read events ad10012000g200370m.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-GIS2-PH > filter region GIS2_CALSRC256.2
!xsel:ASCA-GIS2-PH > extract spectrum
!xsel:ASCA-GIS2-PH > save spectrum ad10012000g220170.cal group=yes
Wrote spectrum to ad10012000g220170.cal
!xsel:ASCA-GIS2-PH > exit save_session=no

-> gis2v4_0.rmf already present in current directory
-> Plotting ad10012000g220170_cal.ps and finding peak
-> Standard Output From STOOL xspec:

 
               XSPEC 9.01 23:50:12 11-Mar-98
 
 Plot device not set, use "cpd" to set it
 
 Type "help" or "?" for further information
!XSPEC> query yes
Querying disabled - assuming answer is yes
!XSPEC> data ad10012000g220170.cal
 Net count rate (cts/s) for file   1  0.4415    +/-  5.4567E-03
   1 data set is in use
!XSPEC> ignore bad
!XSPEC> ignore **-4.0
!XSPEC> ignore 8.0-**
!XSPEC> model const/b + gauss/b + gauss/b
Background components must be from the additive model list
  mo = constant[1] ) + gaussian/b[2] + gaussian/b[3]
 Input parameter value, delta, min, bot, top, and max values for ...
 Mod parameter  1 of component  1 constant factor
    1.000      1.0000E-02      0.          0.      1.0000E+10  1.0000E+10
!
 Mod parameter  2 of component  2 gaussian LineE
    6.500      5.0000E-02      0.          0.      1.0000E+06  1.0000E+06
! 5.9
 Mod parameter  3 of component  2 gaussian Sigma
   0.1000      5.0000E-02      0.          0.       10.00       20.00
! 0.0
 Mod parameter  4 of component  2 gaussian norm
    1.000      1.0000E-02      0.          0.      1.0000E+24  1.0000E+24
!
 Mod parameter  5 of component  3 gaussian LineE
    6.500      5.0000E-02      0.          0.      1.0000E+06  1.0000E+06
! 6.5
 Mod parameter  6 of component  3 gaussian Sigma
   0.1000      5.0000E-02      0.          0.       10.00       20.00
! 0.0
 Mod parameter  7 of component  3 gaussian norm
    1.000      1.0000E-02      0.          0.      1.0000E+24  1.0000E+24
!
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  mo = constant[1] ) + gaussian/b[2] + gaussian/b[3]
  Model Fit Model   Component     Parameter   Value
  par   par comp
    1    1    1       constant    factor     1.00000     +/-      0.
    2    2    2       gaussian/b  LineE      5.90000     +/-      0.
    3    3    2       gaussian/b  Sigma           0.     +/-      0.
    4    4    2       gaussian/b  norm       1.00000     +/-      0.
    5    5    3       gaussian/b  LineE      6.50000     +/-      0.
    6    6    3       gaussian/b  Sigma           0.     +/-      0.
    7    7    3       gaussian/b  norm       1.00000     +/-      0.
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
    7 variable fit parameters
 Chi-Squared =     2.3333E+05 using    84 PHA bins.
 Reduced chi-squared =      3030.
!XSPEC> newpar 5 = 2 1.101005
    6 variable fit parameters
 Chi-Squared =     2.3152E+05 using    84 PHA bins.
 Reduced chi-squared =      2968.
!XSPEC> newpar 6 = 3 1.049288
    5 variable fit parameters
 Chi-Squared =     2.3152E+05 using    84 PHA bins.
 Reduced chi-squared =      2931.
!XSPEC> renorm
 Chi-Squared =      1883.     using    84 PHA bins.
 Reduced chi-squared =      23.83
!XSPEC> fit
 Chi-Squared  Lvl  Fit param # 1     2           3           4
                 5
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   1511.3      0      1.000       5.892      0.1021      0.1134
              9.8275E-02
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   596.35      0      1.000       5.858      0.1584      0.1763
              8.5911E-02
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   286.23     -1      1.000       5.893      0.1782      0.2503
              5.8459E-02
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   275.02     -2      1.000       5.913      0.1879      0.2686
              4.6433E-02
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   274.05     -3      1.000       5.905      0.1819      0.2651
              4.9951E-02
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   274.01     -4      1.000       5.907      0.1830      0.2662
              4.8784E-02
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   273.98     -5      1.000       5.907      0.1824      0.2659
              4.9156E-02
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   273.98      0      1.000       5.907      0.1824      0.2659
              4.9135E-02
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  mo = constant[1] ) + gaussian/b[2] + gaussian/b[3]
  Model Fit Model   Component     Parameter   Value
  par   par comp
    1    1    1       constant    factor     1.00000     +/- -1.0000
    2    2    2       gaussian/b  LineE      5.90669     +/- 0.75620E-02
    3    3    2       gaussian/b  Sigma     0.182372     +/- 0.82079E-02
    4    4    2       gaussian/b  norm      0.265887     +/- 0.55064E-02
    5    2    3       gaussian/b  LineE      6.50330     = par   2 *  1.1010
    6    3    3       gaussian/b  Sigma     0.191361     = par   3 *  1.0493
    7    5    3       gaussian/b  norm      4.913539E-02 +/- 0.39027E-02
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =      274.0     using    84 PHA bins.
 Reduced chi-squared =      3.468
!XSPEC> setplot energy
!XSPEC> iplot data
!PLT> label top GIS2 Calibration Source, should peak near 5.9 keV
!PLT> log x off
!PLT> rescale x 4 8
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
 XSPEC: quit

-> Calibration source ad10012000g220170.cal peaks at 5.90669 +/- 0.007562 keV
-> Standard Output From STOOL group_event_files:

1 ad10012000g300170h.unf 217351
1 ad10012000g300270h.unf 217351
1 ad10012000g300370m.unf 217351

-> Fetching GIS3_CALSRC256.2
-> Extracting ad10012000g320170.cal from ad10012000g300170h.unf ad10012000g300270h.unf ad10012000g300370m.unf
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.13E+05   182456     1024
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.13E+05   182456     1024
      2 X0614+09 PH       HIGH     16/04/93 02:40:04 0.10E+04    28746     1024
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.13E+05   182456     1024
      2 X0614+09 PH       HIGH     16/04/93 02:40:04 0.10E+04    28746     1024
      3 X0614+09 PH       MEDIUM   16/04/93 02:57:48 0.61E+03     6149     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         182456      5769         176687         0         0         0
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g300270h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          28746       492          28254         0         0         0
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g300370m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           6149        97           6052         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        217351      6358         210993         0         0         0
   in   14841.95 seconds
 Spectrum         has     6358 counts for 0.4284     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 14842.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.83356E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1992a           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10012000g320170.cal
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA > read events ad10012000g300170h.unf
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-GIS3-PH > read events ad10012000g300270h.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-GIS3-PH > read events ad10012000g300370m.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!xsel:ASCA-GIS3-PH > filter region GIS3_CALSRC256.2
!xsel:ASCA-GIS3-PH > extract spectrum
!xsel:ASCA-GIS3-PH > save spectrum ad10012000g320170.cal group=yes
Wrote spectrum to ad10012000g320170.cal
!xsel:ASCA-GIS3-PH > exit save_session=no

-> gis3v4_0.rmf already present in current directory
-> Plotting ad10012000g320170_cal.ps and finding peak
-> Standard Output From STOOL xspec:

 
               XSPEC 9.01 23:51:04 11-Mar-98
 
 Plot device not set, use "cpd" to set it
 
 Type "help" or "?" for further information
!XSPEC> query yes
Querying disabled - assuming answer is yes
!XSPEC> data ad10012000g320170.cal
 Net count rate (cts/s) for file   1  0.4284    +/-  5.3775E-03
   1 data set is in use
!XSPEC> ignore bad
!XSPEC> ignore **-4.0
!XSPEC> ignore 8.0-**
!XSPEC> model const/b + gauss/b + gauss/b
Background components must be from the additive model list
  mo = constant[1] ) + gaussian/b[2] + gaussian/b[3]
 Input parameter value, delta, min, bot, top, and max values for ...
 Mod parameter  1 of component  1 constant factor
    1.000      1.0000E-02      0.          0.      1.0000E+10  1.0000E+10
!
 Mod parameter  2 of component  2 gaussian LineE
    6.500      5.0000E-02      0.          0.      1.0000E+06  1.0000E+06
! 5.9
 Mod parameter  3 of component  2 gaussian Sigma
   0.1000      5.0000E-02      0.          0.       10.00       20.00
! 0.0
 Mod parameter  4 of component  2 gaussian norm
    1.000      1.0000E-02      0.          0.      1.0000E+24  1.0000E+24
!
 Mod parameter  5 of component  3 gaussian LineE
    6.500      5.0000E-02      0.          0.      1.0000E+06  1.0000E+06
! 6.5
 Mod parameter  6 of component  3 gaussian Sigma
   0.1000      5.0000E-02      0.          0.       10.00       20.00
! 0.0
 Mod parameter  7 of component  3 gaussian norm
    1.000      1.0000E-02      0.          0.      1.0000E+24  1.0000E+24
!
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  mo = constant[1] ) + gaussian/b[2] + gaussian/b[3]
  Model Fit Model   Component     Parameter   Value
  par   par comp
    1    1    1       constant    factor     1.00000     +/-      0.
    2    2    2       gaussian/b  LineE      5.90000     +/-      0.
    3    3    2       gaussian/b  Sigma           0.     +/-      0.
    4    4    2       gaussian/b  norm       1.00000     +/-      0.
    5    5    3       gaussian/b  LineE      6.50000     +/-      0.
    6    6    3       gaussian/b  Sigma           0.     +/-      0.
    7    7    3       gaussian/b  norm       1.00000     +/-      0.
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
    7 variable fit parameters
 Chi-Squared =     2.2316E+05 using    84 PHA bins.
 Reduced chi-squared =      2898.
!XSPEC> newpar 5 = 2 1.101005
    6 variable fit parameters
 Chi-Squared =     2.2160E+05 using    84 PHA bins.
 Reduced chi-squared =      2841.
!XSPEC> newpar 6 = 3 1.049288
    5 variable fit parameters
 Chi-Squared =     2.2160E+05 using    84 PHA bins.
 Reduced chi-squared =      2805.
!XSPEC> renorm
 Chi-Squared =      1659.     using    84 PHA bins.
 Reduced chi-squared =      21.00
!XSPEC> fit
 Chi-Squared  Lvl  Fit param # 1     2           3           4
                 5
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   1302.8      0      1.000       5.894      0.1131      0.1154
              0.1020
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   658.82      0      1.000       5.876      0.1596      0.1682
              8.9449E-02
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   297.02     -1      1.000       5.950      0.1816      0.2416
              5.4315E-02
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   266.18     -2      1.000       5.980      0.1854      0.2697
              3.7785E-02
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   260.98     -3      1.000       5.964      0.1684      0.2620
              4.5617E-02
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   260.30     -4      1.000       5.970      0.1721      0.2654
              4.2219E-02
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   260.09     -5      1.000       5.968      0.1696      0.2640
              4.3519E-02
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   260.08     -1      1.000       5.968      0.1700      0.2644
              4.3177E-02
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  mo = constant[1] ) + gaussian/b[2] + gaussian/b[3]
  Model Fit Model   Component     Parameter   Value
  par   par comp
    1    1    1       constant    factor     1.00000     +/- -1.0000
    2    2    2       gaussian/b  LineE      5.96837     +/- 0.68060E-02
    3    3    2       gaussian/b  Sigma     0.170011     +/- 0.79743E-02
    4    4    2       gaussian/b  norm      0.264371     +/- 0.52080E-02
    5    2    3       gaussian/b  LineE      6.57121     = par   2 *  1.1010
    6    3    3       gaussian/b  Sigma     0.178391     = par   3 *  1.0493
    7    5    3       gaussian/b  norm      4.317712E-02 +/- 0.34241E-02
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =      260.1     using    84 PHA bins.
 Reduced chi-squared =      3.292
!XSPEC> setplot energy
!XSPEC> iplot data
!PLT> label top GIS3 Calibration Source, should peak near 5.9 keV
!PLT> log x off
!PLT> rescale x 4 8
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
 XSPEC: quit

-> Calibration source ad10012000g320170.cal peaks at 5.96837 +/- 0.006806 keV

Extracting bright and dark Earth event files. ( 23:51:13 )

-> Extracting bright and dark Earth events from ad10012000s000102h.unf
-> Extracting ad10012000s000102h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.83E+04   139029 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s000102h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         139029     21735              0    117294         0         0
 Writing events file
  21735 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        139029     21735              0    117294         0         0
   in    2982.04 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000s000102h.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad10012000s000102h.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad10012000s000102h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        21735
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              75       12243
 Flickering pixels iter, pixels & cnts :   1          77         668
cleaning chip #           1
 Hot pixels & counts                   :              28        2852
 Flickering pixels iter, pixels & cnts :   1          57         333
cleaning chip #           2
 Hot pixels & counts                   :              26        1408
 Flickering pixels iter, pixels & cnts :   1          56         360
cleaning chip #           3
 Hot pixels & counts                   :              18        1769
 Flickering pixels iter, pixels & cnts :   1          69         412
 
 Number of pixels rejected           :          406
 Number of (internal) image counts   :        21735
 Number of image cts rejected (N, %) :        20045     92.2245255
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :           152           85           82           87
 
 Image counts      :         13452         3741         2054         2488
 Image cts rejected:         12911         3185         1768         2181
 Image cts rej (%) :         95.98        85.14        86.08        87.66
 
    filtering data...
 
 Total counts      :         13452         3741         2054         2488
 Total cts rejected:         12911         3185         1768         2181
 Total cts rej (%) :         95.98        85.14        86.08        87.66
 
 Number of clean counts accepted  :         1690
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          406
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad10012000s000112h.unf
-> Extracting ad10012000s000112h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT2  HIGH     15/04/93 21:03:28 0.83E+04   149210 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s000112h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         149210     22833              0    126377         0         0
 Writing events file
  22833 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        149210     22833              0    126377         0         0
   in    2982.04 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000s000112h.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-SIS0-BRIGHT2 > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS0-BRIGHT2 > extract events
!earthevents:ASCA-SIS0-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Cleaning hot pixels from ad10012000s000112h.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad10012000s000112h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        22833
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              76       12467
 Flickering pixels iter, pixels & cnts :   1          87         714
cleaning chip #           1
 Hot pixels & counts                   :              29        2891
 Flickering pixels iter, pixels & cnts :   1          56         322
cleaning chip #           2
 Hot pixels & counts                   :              27        1443
 Flickering pixels iter, pixels & cnts :   1          65         418
cleaning chip #           3
 Hot pixels & counts                   :              19        1801
 Flickering pixels iter, pixels & cnts :   1          72         421
 
 Number of pixels rejected           :          431
 Number of (internal) image counts   :        22833
 Number of image cts rejected (N, %) :        20477     89.6816025
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :           163           85           92           91
 
 Image counts      :         13873         3919         2368         2673
 Image cts rejected:         13181         3213         1861         2222
 Image cts rej (%) :         95.01        81.99        78.59        83.13
 
    filtering data...
 
 Total counts      :         13873         3919         2368         2673
 Total cts rejected:         13181         3213         1861         2222
 Total cts rej (%) :         95.01        81.99        78.59        83.13
 
 Number of clean counts accepted  :         2356
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          431
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad10012000s000202h.unf
-> Extracting ad10012000s000202h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT   HIGH     16/04/93 00:49:08 0.42E+04    91545 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s000202h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          91545      5393              0     86152         0         0
 Writing events file
   5393 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         91545      5393              0     86152         0         0
   in     736.07 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000s000202h.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad10012000s000202h.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad10012000s000202h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         5393
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              72        2892
 Flickering pixels iter, pixels & cnts :   1          23         137
cleaning chip #           1
 Hot pixels & counts                   :              26         729
 Flickering pixels iter, pixels & cnts :   1          10          53
cleaning chip #           2
 Hot pixels & counts                   :              18         396
 Flickering pixels iter, pixels & cnts :   1          33         158
cleaning chip #           3
 Hot pixels & counts                   :              19         505
 Flickering pixels iter, pixels & cnts :   1          21          83
 
 Number of pixels rejected           :          222
 Number of (internal) image counts   :         5393
 Number of image cts rejected (N, %) :         4953     91.8412781
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            95           36           51           40
 
 Image counts      :          3142          860          686          705
 Image cts rejected:          3029          782          554          588
 Image cts rej (%) :         96.40        90.93        80.76        83.40
 
    filtering data...
 
 Total counts      :          3142          860          686          705
 Total cts rejected:          3029          782          554          588
 Total cts rej (%) :         96.40        90.93        80.76        83.40
 
 Number of clean counts accepted  :          440
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          222
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad10012000s000302m.unf
-> Extracting ad10012000s000302m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT   MEDIUM   15/04/93 20:55:44 0.65E+03     2412 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s000302m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           2412       722              0      1690         0         0
 Writing events file
    722 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2412       722              0      1690         0         0
   in     223.50 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000s000302m.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad10012000s000302m.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad10012000s000302m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :          722
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              20         238
 Flickering pixels iter, pixels & cnts :   1          10          38
cleaning chip #           1
 Hot pixels & counts                   :              12         124
 Flickering pixels iter, pixels & cnts :   1           6          21
cleaning chip #           2
 Hot pixels & counts                   :               8          56
 Flickering pixels iter, pixels & cnts :   1           2           6
cleaning chip #           3
 Hot pixels & counts                   :               7          71
 Flickering pixels iter, pixels & cnts :   1           5          18
 
 Number of pixels rejected           :           70
 Number of (internal) image counts   :          722
 Number of image cts rejected (N, %) :          572     79.2243805
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            30           18           10           12
 
 Image counts      :           311          181          108          122
 Image cts rejected:           276          145           62           89
 Image cts rej (%) :         88.75        80.11        57.41        72.95
 
    filtering data...
 
 Total counts      :           311          181          108          122
 Total cts rejected:           276          145           62           89
 Total cts rej (%) :         88.75        80.11        57.41        72.95
 
 Number of clean counts accepted  :          150
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           70
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad10012000s000312m.unf
-> Extracting ad10012000s000312m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT2  MEDIUM   15/04/93 20:55:44 0.65E+03     2578 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s000312m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           2578       771              0      1807         0         0
 Writing events file
    771 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2578       771              0      1807         0         0
   in     223.50 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000s000312m.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-SIS0-BRIGHT2 > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS0-BRIGHT2 > extract events
!earthevents:ASCA-SIS0-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Cleaning hot pixels from ad10012000s000312m.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad10012000s000312m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :          771
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              20         239
 Flickering pixels iter, pixels & cnts :   1          10          38
cleaning chip #           1
 Hot pixels & counts                   :              12         124
 Flickering pixels iter, pixels & cnts :   1           6          21
cleaning chip #           2
 Hot pixels & counts                   :               8          56
 Flickering pixels iter, pixels & cnts :   1           2           6
cleaning chip #           3
 Hot pixels & counts                   :               7          72
 Flickering pixels iter, pixels & cnts :   1           5          18
 
 Number of pixels rejected           :           70
 Number of (internal) image counts   :          771
 Number of image cts rejected (N, %) :          574     74.4487686
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            30           18           10           12
 
 Image counts      :           321          202          116          132
 Image cts rejected:           277          145           62           90
 Image cts rej (%) :         86.29        71.78        53.45        68.18
 
    filtering data...
 
 Total counts      :           321          202          116          132
 Total cts rejected:           277          145           62           90
 Total cts rej (%) :         86.29        71.78        53.45        68.18
 
 Number of clean counts accepted  :          197
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           70
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad10012000s000402h.unf
-> Extracting ad10012000s000402h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT   HIGH     16/04/93 02:39:52 0.10E+04    36050 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data24/seq_proc/10012000.007/ad10012000s000402h.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000s000402h.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

-> Deleting ad10012000s000402h.drk since it contains 0 events
-> Extracting bright and dark Earth events from ad10012000s000412h.unf
-> Extracting ad10012000s000412h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT2  HIGH     16/04/93 02:39:52 0.10E+04    38131 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data24/seq_proc/10012000.007/ad10012000s000412h.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000s000412h.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-SIS0-BRIGHT2 > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS0-BRIGHT2 > extract events
!earthevents:ASCA-SIS0-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Deleting ad10012000s000412h.drk since it contains 0 events
-> Extracting bright and dark Earth events from ad10012000s000502m.unf
-> Extracting ad10012000s000502m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 X0614+09 BRIGHT   MEDIUM   16/04/93 02:57:32 0.60E+03    13174 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data24/seq_proc/10012000.007/ad10012000s000502m.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000s000502m.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

-> Deleting ad10012000s000502m.drk since it contains 0 events
-> Extracting bright and dark Earth events from ad10012000s100102h.unf
-> Extracting ad10012000s100102h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT   HIGH     15/04/93 21:03:28 0.83E+04   154188 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100102h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         154188     18793              0    135395         0         0
 Writing events file
  18793 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        154188     18793              0    135395         0         0
   in    2979.98 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000s100102h.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad10012000s100102h.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad10012000s100102h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        18793
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              35        3331
 Flickering pixels iter, pixels & cnts :   1          52         411
cleaning chip #           1
 Hot pixels & counts                   :              38        4876
 Flickering pixels iter, pixels & cnts :   1          67         482
cleaning chip #           2
 Hot pixels & counts                   :              33        4129
 Flickering pixels iter, pixels & cnts :   1          44         341
cleaning chip #           3
 Hot pixels & counts                   :              28        3623
 Flickering pixels iter, pixels & cnts :   1          34         314
 
 Number of pixels rejected           :          331
 Number of (internal) image counts   :        18793
 Number of image cts rejected (N, %) :        17507     93.1570282
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            87          105           77           62
 
 Image counts      :          4029         5774         4878         4112
 Image cts rejected:          3742         5358         4470         3937
 Image cts rej (%) :         92.88        92.80        91.64        95.74
 
    filtering data...
 
 Total counts      :          4029         5774         4878         4112
 Total cts rejected:          3742         5358         4470         3937
 Total cts rej (%) :         92.88        92.80        91.64        95.74
 
 Number of clean counts accepted  :         1286
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          331
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad10012000s100112h.unf
-> Extracting ad10012000s100112h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT2  HIGH     15/04/93 21:03:28 0.83E+04   164889 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100112h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         164889     19659              0    145230         0         0
 Writing events file
  19659 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        164889     19659              0    145230         0         0
   in    2979.98 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000s100112h.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS1-BRIGHT2 > extract events
!earthevents:ASCA-SIS1-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Cleaning hot pixels from ad10012000s100112h.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad10012000s100112h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        19659
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              35        3341
 Flickering pixels iter, pixels & cnts :   1          53         417
cleaning chip #           1
 Hot pixels & counts                   :              38        4879
 Flickering pixels iter, pixels & cnts :   1          68         493
cleaning chip #           2
 Hot pixels & counts                   :              33        4140
 Flickering pixels iter, pixels & cnts :   1          46         353
cleaning chip #           3
 Hot pixels & counts                   :              28        3900
 Flickering pixels iter, pixels & cnts :   1          37         347
 
 Number of pixels rejected           :          338
 Number of (internal) image counts   :        19659
 Number of image cts rejected (N, %) :        17870     90.8998413
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            88          106           79           65
 
 Image counts      :          4155         5901         5056         4547
 Image cts rejected:          3758         5372         4493         4247
 Image cts rej (%) :         90.45        91.04        88.86        93.40
 
    filtering data...
 
 Total counts      :          4155         5901         5056         4547
 Total cts rejected:          3758         5372         4493         4247
 Total cts rej (%) :         90.45        91.04        88.86        93.40
 
 Number of clean counts accepted  :         1789
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          338
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad10012000s100202h.unf
-> Extracting ad10012000s100202h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT   HIGH     16/04/93 00:49:52 0.42E+04    96854 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100202h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          96854      4805              0     92049         0         0
 Writing events file
   4805 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         96854      4805              0     92049         0         0
   in     736.07 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000s100202h.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad10012000s100202h.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad10012000s100202h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         4805
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              32         863
 Flickering pixels iter, pixels & cnts :   1          15          70
cleaning chip #           1
 Hot pixels & counts                   :              32        1215
 Flickering pixels iter, pixels & cnts :   1          18         100
cleaning chip #           2
 Hot pixels & counts                   :              27        1003
 Flickering pixels iter, pixels & cnts :   1          19         111
cleaning chip #           3
 Hot pixels & counts                   :              30         985
 Flickering pixels iter, pixels & cnts :   1          11          51
 
 Number of pixels rejected           :          184
 Number of (internal) image counts   :         4805
 Number of image cts rejected (N, %) :         4398     91.5296555
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            47           50           46           41
 
 Image counts      :          1023         1430         1237         1115
 Image cts rejected:           933         1315         1114         1036
 Image cts rej (%) :         91.20        91.96        90.06        92.91
 
    filtering data...
 
 Total counts      :          1023         1430         1237         1115
 Total cts rejected:           933         1315         1114         1036
 Total cts rej (%) :         91.20        91.96        90.06        92.91
 
 Number of clean counts accepted  :          407
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          184
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad10012000s100302m.unf
-> Extracting ad10012000s100302m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT   MEDIUM   15/04/93 20:55:44 0.65E+03     2530 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100302m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           2530       823              0      1707         0         0
 Writing events file
    823 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2530       823              0      1707         0         0
   in     223.50 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000s100302m.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad10012000s100302m.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad10012000s100302m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :          823
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              19         133
 Flickering pixels iter, pixels & cnts :   1           3          10
cleaning chip #           1
 Hot pixels & counts                   :              20         203
 Flickering pixels iter, pixels & cnts :   1           1           4
cleaning chip #           2
 Hot pixels & counts                   :              17         169
 Flickering pixels iter, pixels & cnts :   1           8          25
cleaning chip #           3
 Hot pixels & counts                   :              17         151
 Flickering pixels iter, pixels & cnts :   1           7          22
 
 Number of pixels rejected           :           92
 Number of (internal) image counts   :          823
 Number of image cts rejected (N, %) :          717     87.1202927
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            22           21           25           24
 
 Image counts      :           179          234          220          190
 Image cts rejected:           143          207          194          173
 Image cts rej (%) :         79.89        88.46        88.18        91.05
 
    filtering data...
 
 Total counts      :           179          234          220          190
 Total cts rejected:           143          207          194          173
 Total cts rej (%) :         79.89        88.46        88.18        91.05
 
 Number of clean counts accepted  :          106
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           92
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad10012000s100312m.unf
-> Extracting ad10012000s100312m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT2  MEDIUM   15/04/93 20:55:44 0.65E+03     2672 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000s100312m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           2672       870              0      1802         0         0
 Writing events file
    870 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2672       870              0      1802         0         0
   in     223.50 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000s100312m.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS1-BRIGHT2 > extract events
!earthevents:ASCA-SIS1-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Cleaning hot pixels from ad10012000s100312m.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad10012000s100312m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :          870
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              19         133
 Flickering pixels iter, pixels & cnts :   1           3          10
cleaning chip #           1
 Hot pixels & counts                   :              20         205
 Flickering pixels iter, pixels & cnts :   1           1           4
cleaning chip #           2
 Hot pixels & counts                   :              16         164
 Flickering pixels iter, pixels & cnts :   1           9          30
cleaning chip #           3
 Hot pixels & counts                   :              18         163
 Flickering pixels iter, pixels & cnts :   1           7          22
 
 Number of pixels rejected           :           93
 Number of (internal) image counts   :          870
 Number of image cts rejected (N, %) :          731     84.0229874
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            22           21           25           25
 
 Image counts      :           189          244          228          209
 Image cts rejected:           143          209          194          185
 Image cts rej (%) :         75.66        85.66        85.09        88.52
 
    filtering data...
 
 Total counts      :           189          244          228          209
 Total cts rejected:           143          209          194          185
 Total cts rej (%) :         75.66        85.66        85.09        88.52
 
 Number of clean counts accepted  :          139
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           93
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad10012000s100402h.unf
-> Extracting ad10012000s100402h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT   HIGH     16/04/93 02:39:52 0.10E+04    34536 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data24/seq_proc/10012000.007/ad10012000s100402h.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000s100402h.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

-> Deleting ad10012000s100402h.drk since it contains 0 events
-> Extracting bright and dark Earth events from ad10012000s100412h.unf
-> Extracting ad10012000s100412h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT2  HIGH     16/04/93 02:39:52 0.10E+04    36691 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data24/seq_proc/10012000.007/ad10012000s100412h.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000s100412h.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS1-BRIGHT2 > extract events
!earthevents:ASCA-SIS1-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Deleting ad10012000s100412h.drk since it contains 0 events
-> Extracting bright and dark Earth events from ad10012000s100502m.unf
-> Extracting ad10012000s100502m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 X0614+09 BRIGHT   MEDIUM   16/04/93 02:57:32 0.60E+03    14931 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data24/seq_proc/10012000.007/ad10012000s100502m.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000s100502m.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

-> Deleting ad10012000s100502m.drk since it contains 0 events
-> Extracting bright and dark Earth events from ad10012000g200170h.unf
-> Extracting ad10012000g200170h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.13E+05   178048     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         178048      6589              0    171459         0         0
 Writing events file
   6589 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        178048      6589              0    171459         0         0
   in    3644.14 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000g200170h.unf
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting ad10012000g200170h.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.13E+05   178048     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         178048      4611              0    173437         0         0
 Writing events file
   4611 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        178048      4611              0    173437         0         0
   in    1943.99 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000g200170h.unf
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting bright and dark Earth events from ad10012000g200270h.unf
-> Extracting ad10012000g200270h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     16/04/93 02:40:04 0.10E+04    28126     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data24/seq_proc/10012000.007/ad10012000g200270h.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000g200270h.unf
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Deleting ad10012000g200270h.drk since it contains 0 events
-> Extracting ad10012000g200270h.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     16/04/93 02:40:04 0.10E+04    28126     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data24/seq_proc/10012000.007/ad10012000g200270h.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000g200270h.unf
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Deleting ad10012000g200270h.brt since it contains 0 events
-> Extracting bright and dark Earth events from ad10012000g200370m.unf
-> Extracting ad10012000g200370m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       MEDIUM   16/04/93 02:57:48 0.61E+03     6139     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data24/seq_proc/10012000.007/ad10012000g200370m.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000g200370m.unf
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Deleting ad10012000g200370m.drk since it contains 0 events
-> Extracting ad10012000g200370m.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       MEDIUM   16/04/93 02:57:48 0.61E+03     6139     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data24/seq_proc/10012000.007/ad10012000g200370m.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000g200370m.unf
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Deleting ad10012000g200370m.brt since it contains 0 events
-> Extracting bright and dark Earth events from ad10012000g300170h.unf
-> Extracting ad10012000g300170h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.13E+05   182456     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         182456      6102              0    176354         0         0
 Writing events file
   6102 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        182456      6102              0    176354         0         0
   in    3644.14 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000g300170h.unf
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Extracting ad10012000g300170h.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     15/04/93 21:03:46 0.13E+05   182456     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data24/seq_proc/10012000.007/ad10012000g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         182456      4424              0    178032         0         0
 Writing events file
   4424 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        182456      4424              0    178032         0         0
   in    1943.99 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000g300170h.unf
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Extracting bright and dark Earth events from ad10012000g300270h.unf
-> Extracting ad10012000g300270h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     16/04/93 02:40:04 0.10E+04    28746     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data24/seq_proc/10012000.007/ad10012000g300270h.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000g300270h.unf
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Deleting ad10012000g300270h.drk since it contains 0 events
-> Extracting ad10012000g300270h.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       HIGH     16/04/93 02:40:04 0.10E+04    28746     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data24/seq_proc/10012000.007/ad10012000g300270h.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000g300270h.unf
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Deleting ad10012000g300270h.brt since it contains 0 events
-> Extracting bright and dark Earth events from ad10012000g300370m.unf
-> Extracting ad10012000g300370m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       MEDIUM   16/04/93 02:57:48 0.61E+03     6149     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data24/seq_proc/10012000.007/ad10012000g300370m.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000g300370m.unf
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Deleting ad10012000g300370m.drk since it contains 0 events
-> Extracting ad10012000g300370m.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 X0614+09 PH       MEDIUM   16/04/93 02:57:48 0.61E+03     6149     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data24/seq_proc/10012000.007/ad10012000g300370m.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data24/seq_proc/10012000.007/
Setting mkf directory to /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA > read events ad10012000g300370m.unf
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data24/seq_proc/10012000.007/
HK Directory is: /data/data24/seq_proc/10012000.007/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Deleting ad10012000g300370m.brt since it contains 0 events

Determining information about this observation ( 00:10:46 )

-> Calculating ISAS time for sis
-> Calculating ISAS time for gis
-> Recording dates of PI calibration files
-> Standard Output From FTOOL sec2time:

 Offset of  1.500000000000000E+08 from 1/1/93     0:0:0
 is date and time (including leapseconds) = 3/10/97    2:39:56.000000
 Modified Julian Day    =   50724.111064814816928

Generating event file information page ( 00:12:37 )

-> Summing time and events for s0 event files
-> Standard Output From STOOL get_uniq_keys:

ad10012000s000102h.unf|TLM_FILE|ft930415_2053.0240|Name of input telemetry file
ad10012000s000202h.unf|TLM_FILE|ft930415_2053.0240|Name of input telemetry file
ad10012000s000402h.unf|TLM_FILE|ft930416_0239.0325|Name of input telemetry file
ad10012000s000102h.unf|ORIGMODE|FAINT|DATAMODE before any conversion
ad10012000s000202h.unf|ORIGMODE|BRIGHT|DATAMODE before any conversion
ad10012000s000402h.unf|ORIGMODE|FAINT|DATAMODE before any conversion

-> listing ad10012000s000102h.unf
-> listing ad10012000s000202h.unf
-> listing ad10012000s000402h.unf
-> Standard Output From STOOL get_uniq_keys:

ad10012000s000302m.unf|TLM_FILE|ft930415_2053.0240|Name of input telemetry file
ad10012000s000502m.unf|TLM_FILE|ft930416_0239.0325|Name of input telemetry file
ad10012000s000302m.unf|ORIGMODE|FAINT|DATAMODE before any conversion
ad10012000s000502m.unf|ORIGMODE|BRIGHT|DATAMODE before any conversion

-> listing ad10012000s000302m.unf
-> listing ad10012000s000502m.unf
-> Standard Output From STOOL get_uniq_keys:

ad10012000s000112h.unf|TLM_FILE|ft930415_2053.0240|Name of input telemetry file
ad10012000s000412h.unf|TLM_FILE|ft930416_0239.0325|Name of input telemetry file

-> listing ad10012000s000112h.unf
-> listing ad10012000s000412h.unf
-> listing ad10012000s000312m.unf
-> Standard Output From STOOL get_uniq_keys:

ad10012000s000101h.unf|TLM_FILE|ft930415_2053.0240|Name of input telemetry file
ad10012000s000401h.unf|TLM_FILE|ft930416_0239.0325|Name of input telemetry file

-> listing ad10012000s000101h.unf
-> listing ad10012000s000401h.unf
-> listing ad10012000s000301m.unf
-> Summing time and events for s1 event files
-> Standard Output From STOOL get_uniq_keys:

ad10012000s100102h.unf|TLM_FILE|ft930415_2053.0240|Name of input telemetry file
ad10012000s100202h.unf|TLM_FILE|ft930415_2053.0240|Name of input telemetry file
ad10012000s100402h.unf|TLM_FILE|ft930416_0239.0325|Name of input telemetry file
ad10012000s100102h.unf|ORIGMODE|FAINT|DATAMODE before any conversion
ad10012000s100202h.unf|ORIGMODE|BRIGHT|DATAMODE before any conversion
ad10012000s100402h.unf|ORIGMODE|FAINT|DATAMODE before any conversion

-> listing ad10012000s100102h.unf
-> listing ad10012000s100202h.unf
-> listing ad10012000s100402h.unf
-> Standard Output From STOOL get_uniq_keys:

ad10012000s100302m.unf|TLM_FILE|ft930415_2053.0240|Name of input telemetry file
ad10012000s100502m.unf|TLM_FILE|ft930416_0239.0325|Name of input telemetry file
ad10012000s100302m.unf|ORIGMODE|FAINT|DATAMODE before any conversion
ad10012000s100502m.unf|ORIGMODE|BRIGHT|DATAMODE before any conversion

-> listing ad10012000s100302m.unf
-> listing ad10012000s100502m.unf
-> Standard Output From STOOL get_uniq_keys:

ad10012000s100112h.unf|TLM_FILE|ft930415_2053.0240|Name of input telemetry file
ad10012000s100412h.unf|TLM_FILE|ft930416_0239.0325|Name of input telemetry file

-> listing ad10012000s100112h.unf
-> listing ad10012000s100412h.unf
-> listing ad10012000s100312m.unf
-> Standard Output From STOOL get_uniq_keys:

ad10012000s100101h.unf|TLM_FILE|ft930415_2053.0240|Name of input telemetry file
ad10012000s100401h.unf|TLM_FILE|ft930416_0239.0325|Name of input telemetry file

-> listing ad10012000s100101h.unf
-> listing ad10012000s100401h.unf
-> listing ad10012000s100301m.unf
-> Summing time and events for g2 event files
-> Standard Output From STOOL get_uniq_keys:

ad10012000g200170h.unf|TLM_FILE|ft930415_2053.0240|Name of input telemetry file
ad10012000g200270h.unf|TLM_FILE|ft930416_0239.0325|Name of input telemetry file

-> listing ad10012000g200170h.unf
-> listing ad10012000g200270h.unf
-> listing ad10012000g200370m.unf
-> Summing time and events for g3 event files
-> Standard Output From STOOL get_uniq_keys:

ad10012000g300170h.unf|TLM_FILE|ft930415_2053.0240|Name of input telemetry file
ad10012000g300270h.unf|TLM_FILE|ft930416_0239.0325|Name of input telemetry file

-> listing ad10012000g300170h.unf
-> listing ad10012000g300270h.unf
-> listing ad10012000g300370m.unf

Creating sequence documentation ( 00:20:47 )

Creating HTML source list ( 00:21:26 )

Listing the files for distribution ( 00:22:42 )

-> Saving job.par as ad10012000_007_job.par and process.par as ad10012000_007_process.par
-> Creating the FITS format file catalog ad10012000_tape.cat
-> Creating the trend product catalog
-> Creating the FITS format file catalog ad10012000_trend.cat
-> Creating ad10012000_007_file_info.html

Doing final wrap up of all files ( 00:32:13 )

-> Adding FITS keywords to all distributed FITS files
-> Running fverify on all distributed files
-> Calculating checksums for all FITS files
-> Standard Output From FTOOL fchecksum:

Checksum keywords updated successfully.