========================= Version 1.2 (Released 3/9/90) Added a -p option to rpict and pfilt to set the pixel aspect ratio for output. Instead of giving the absolute x and y resolutions, the user now gives rpict and pfilt the maximum desired resolution for x and y and the pixel aspect ratio is used along with the given view to calculate appropriate values within this boundary. This makes for much more natural view specifications. For example, for a 512x400 device with a pixel aspect ratio of 1.0, the pfilt command: pfilt -x 512 -y 400 -p 1 will always produce the appropriate output, regardless of the aspect ratio of the input picture. If necessary, the x or y output resolution will be reduced to accommodate the device's resolution. A square image would occupy a region of 400x400 pixels. View shift and lift options were added to the list of standard view parameters, for specifying views for panoramas and holograms. Rview no longer takes options for x and y resolution, but instead gets them from the device driver along with the pixel ratio. This makes it much easier to change the view aspect ratio (with the vh and vv parameters). A -z option was added to rpict to write out the distances for each pixel in an image. This may be useful for z-buffer operations, and is used by the new program pinterp, described below. A program called pinterp was added to the burgeoning list of picture filters and converters. This program is designed primarily to interpolate animated frames for walk-throughs of static scenes, but it has a number of other useful functions besides. It takes as its input one or more rendered pictures (with their corresponding z value files) and desired viewpoint (hopefully not too far afield from the given images). Pinterp then takes the input frames and moves the pixels to their new computed location. Filling operations make sure that the final image does not have large unpainted regions. Added smoothing option to gensurf, using bilinear Phong surface normal interpolation. Not perfect, but it's better than nothing and permits the use of fewer polygons to represent smoothly curved surfaces. ========================= Version 1.3 (Released 10/22/90) Added conversion utility for IES (Illuminating Engineering Society) standard format luminaire data. The translator, called ies2rad, takes any number of luminaire data files and creates the necessary Radiance geometric descriptions and data files and puts them in the specified library location. A new data format was added to accommodate irregularly-spaced data points. Added rview driver for NeWS for Sun and Silicon Graphics workstations. This work was done by Isaac Kwo. Fixed oconv for scenes with many overlapping instances (runs faster now). Added consitency checks intended to detect stale octrees without restricting changes to surface modifiers. (But you still can't change total number of objects). Stale octrees caused some of the strangest behavior... Finally broke down and wrote my own malloc(3) routines. There is a CalTech module floating around Berkeley that caused a lot of trouble for bmalloc(), resulting in about twice the needed memory use. Added translator for Architrion. Arch2rad uses mapping rules to assign materials to surfaces from input file. This is a general method (dreamed up by Charles Ehrlich) that allows users to assign materials based on whatever information is available from the CAD file. See the accompanying description file on translators in the ray/doc/notes directory. Added fisheye view types to rpict and rview, useful for looking at entire scenes and for LEEP virtual reality wide field stereo viewer. Wrote xshowtrace, a fun program for watching rays as they are being traced on an X11 display. Write ra_pr24 for converting between 24-bit Sun rasterfiles and Radiance pictures. Perhaps this should be incorporated in ra_pr, as ra_t8 and ra_t16 should be one program, but the algorithms and memory requirements are totally different for colormapped images. Added routines for performing 24-bit gamma correction in integer domain, making programs like ra_pr24 and ra_t16 run faster. ========================= Version 1.4 (Released early 1991?) Fixed bug in IES translator that resulted in the incorrect interpretation of type B photometric data. (1.3.1) Added types for using BRDF data: plasfunc, metfunc, plasdata and metdata. Added interpretation of source color to ies2rad and color corrective filtering to pfilt. Reference file used by both is "lamp.tab" in library directory. Added picture flipping program, pflip, and pattern preprocessing script, normpat.csh, to the px directory. Fixed bug in ra_pr24 that caused the reversal of red and blue values. New version accepts both RT_STANDARD and RT_FORMAT_RGB files but produces only RT_STANDARD rasterfiles as output. Added -m option to xform to change modifiers for surfaces. Wrote replmarks program to replace markers in a Radiance scene file for light sources or other objects. Added global compilation script, makeall. Fixed calculation of luminance in display programs and gensky to use white light assumption. Added options and features to pcomb. Added FORMAT= line to all Radiance file headers for improved error checking and clarity. Added icon bitmaps for rview and x11image under X11 and fixed a bug that caused x11image to ignore keyboard input. ****** COMPATIBILITY CHANGE ******** Added constant definitions to cal files using ':' instead of '='. This makes for faster calculations since many more constant expressions can be reduced at "compile" time. Created glare calculation programs in util directory. Findglare locates glare sources, xglaresrc circles sources on a displayed image, and glarendx computes various glare indices. ========================= Version 2.0 (Released 11/26/91) Added -i option to renderers for computing irradiance rather than radiance. Eliminated redundant -oI option from rtrace and added -I option to replace old -oi. This hack ignores glass and similar surfaces during the calculation. Changed icon for x11image (renamed ximage) to miniature bitmap of picture. Fixed bug in xshowtrace that prevented it from working with twm. Added memory recovery feature to rview so that when it refines itself out of memory it doesn't quit but instead gives the user a command line saying "out of memory:", which allows the output to be written and so forth before quitting or restarting the image. Added -g (gamma correction) option to pvalue. Added the more general BRTDfunc for procedural definition of bidirectional reflectance-transmittance distribution functions. Also added transfunc and transdata types. Changed trans types to modify the color of the transmitted specular component. Fixed a bug in ra_t16 introduced in the last change which caused problems for the (default) 16-bit output mode. Improved Monte Carlo sampling for penumbras (-dj) and ambient super-samples (-as) using stratified random number sequence introduced by Christophe Schlick at '91 Eurographics workshop on rendering. Wrote falsecolor program to transform images to false color with value labels. Modified pcomb to allow different output sizes and access to local pixel neighborhood for specialty filtering applications. Made cone and sphere routines more forgiving of negative radii, switching between inverted types as necessary and giving warning messages instead of bombing. Cones with equal radii are now silently converted into cylinders. Hopefully, these changes will make writing Radiance scene file translators a little bit easier. Unfortunately, we still bomb for zero-sized cones and spheres. Wrote a program called getbbox that just computes the bounding box for a set of Radiance scene files. It is basically a modified version of oconv that doesn't store objects in memory and doesn't care about undefined modifiers. Added -a and -l options to pcompos and made both pcompos and pcomb read from commands as well as files. Substantially improved the accuracy and appearance of the interreflection calculation by computing gradients at the same time as primary values and then using a first order interpolation scheme. This affects the information stored in ambient files, so old files will have to be thrown away. Added secondary light sources from planar mirror, prismatic and holographic surfaces. This created the new options -dr (direct relays) and -dp (direct presample density) to the renderers. The document secsrc.note describes this feature in greater detail. Put many of the routines into a common library. Wrote a replacement for makedist, called mkillum, which generates light distribtuions and illum descriptions for windows, skylights, etc. in a much more natural and automatic fashion. Fixed long-standing bug in text routines which caused slanted text to slant the wrong way! Added -e option to ra_bn, ra_pr, ra_pr24, ra_t8 and ra_t16 programs for faster and more convenient image conversion w/o using pfilt. ****** COMPATIBILITY CHANGE ******** Finally added contexts to calcomp routines so identical names in different function files no longer conflict. Loading of function files also works automatically without those nasty "key" variables. New context marks (backquote characters) appear in some local variables defined in some of the cal files. This is inconsistent with older versions, and must be changed back to and underscore or some other legal character if these files are used by 1.4 and earlier. Wrote ra_tiff program, using Sam Leffler's libtiff package to read and write 24-bit TIFF images. Wrote ra_ppm program to convert to and from Poskanzer Pixmaps. ****** COMPATIBILITY CHANGE ******** Changed run-length encoding of Radiance pictures to gain better compression. Routines can still read old format, but new ra_rgbe program must be used to write convert images to a more generic format that can be read by release 1.4 and earlier. Defined U and V parameters in rayinit.cal for more convenient (and sloppy) use of 2-dimensional textures and patterns on planar surfaces. Beefed up lampcolor program to compute spectral radiance for diffuse emitters. This was a previously a pain in the butt and a serious source of error for scenes not modeled using IES data files. Added version reporting to rpict, rtrace and rview. Use standalone -version option. Changed to quincunx initial sampling pattern in rpict. This should reduce artifacts from adaptive image sampling at no added cost. Added -rgb option to ra_pr24 to produce RT_FORMAT_RGB files. Added -ds option to renderers to make source sampling more accurate for large area sources. It is no longer necessary or recommended to break large sources (such as windows) into smaller pieces with gensurf unless their output distribution changes over their surface. Also, cylinders can now be used as light sources, provided they are not too short compared to their radius (causing them to be frequently missed). Added -I option to xform to invert surfaces. Added SMLFLT and BIGMEM defines to better control the sizes of data structures during compilation. Made their setting relatively straightforward in makeall and created a separate rmake program to hold the options generated by makeall. Made the programs more forgiving of machine differences on octrees. ****** COMPATIBILITY CHANGE ******** Fixed incorrect conversion factor between radiance and luminance. The correct luminous efficacy value is now defined in color.h as WHTEFFICACY. It was 470 lumens/watt previously, now it has been corrected to 179 lumens/watt. This affects the absolute values in the output of programs like gensky and ies2rad. Thus, these programs should be rerun to generate corrected files for this version of Radiance. Also, the new versions of display programs like ximage will give different values with the 'l' command on an image generated with 1.4 and previous releases. The following alias may be used to fix the radiance values in a picture generated using previous versions of gensky and ies2rad: alias pfixabs '( echo EXPOSURE=.381 ; cat \!:1 ) > \!:1.$$ ; mv \!:1.$$ \!:1' Improved accuracy of glass material type and added option for user-supplied index of refraction. Added sgi to rt/Makefile and px/Makefile SPECIAL category for compiling Isaac Kwo's NeWS driver for rview and the glimage program by Jim Winget. Also fixed various compile problems for the SGI. Improved handling of alternate scanline orientations. The programs pflip and protate (used to be prot) now affect the scanline ordering of the file without messing up the view parameters for programs like pinterp and findglare. ========================== Version 2.1 (Released 5/20/92) ****** COMPATIBILITY CHANGE ******** Changed function specifications to allow the use of expressions as well as variables in scene files. Use of this feature may result in some loss of backwards compatibility as older software does not support it. Added makeall option for NeXT machine and changed code to suit. ****** COMPATIBILITY CHANGE ******** Added off-specular sampling and anisotropic materials plastic2, metal2 and trans2. The old options -sp, -sj, -st and -p have been renamed to -ps, -pj, -pt and -pa, respectively. New options -sj and -st have been introduced. Improved ray intersection calculations using -DSMLFLT option by increasing epsilon used in tests. This eliminates most of the errors that occured when this compile option was used in version 2.0. Added capability to gensurf to read height or point data from a file. This makes it more convenient to make (optionally smoothed) landscapes from recorded measurements and the like. Corrected irradiance gradient calculation. New formula predicts gradient better and thus reduces artifacts in indirect calculation. Modified replmarks to accept multiple markers. Added -aI and -aE options to read ambient include/exclude materials from a file. Reduced effect of light leaks during interreflection calculation. Added -ang option to gensky for giving solar angles explicitly. Added ability of "view" command within rview to accept view options. Fixed a long-standing bug in gensky that caused it to report inaccurate values for the ground ambient level. Since the dayfact script uses this value in calculating its results, version 2.0 will be in error (by as much as 30 or 40%). Fixed a bug in the reflectance normalization for isotropic and anisotropic Gaussian highlights that caused too much light to be reflected near grazing angles. Much thanks to the folks at Ohio State University (Steve Spencer and Kevin Simon) who pointed this out to me! Fixed bug in xshowtrace introduced in 2.0. It absolutely didn't work after my most recent changes to image.c. (Sorry about that!) Finally fixed shortcoming of view reading routines so they can get the views from pictures created with absolute program paths (eg. /usr/local/bin/rpict). This affects programs like xshowtrace and glare, as well as the recover option of rpict. Fixed isotropic Gaussian distribution (highlights for types "metal" and "plastic") to make them more accurate and bring them into line with the new anisotropic Gaussian models ("metal2" and "plastic2"). This may affect the appearance of some hightlights. Added -H and -R options to pvalue to control resolution strings and color ordering. Fixed byte ordering for 24-bit color displays in ximage. ========================== Version 2.2 (No official release) Made more fixes in rview and ximage for different display hardware. Philip Thompson and Peter Apian helped with suggestions and testing. Fixed bug in -e option of xform that kept it from fully expanding some scene files. Added proportional text spacing (-s option for psign, new argument for text primitives). Added antialiasing (3x3 super-sampling) to psign. Added code in display drivers to read environment variable called "GAMMA" to set gamma correction for different monitors. See notes in this directory on gamma_corr. Added CC defines to all the Rmakefiles so that other C compilers may be used consistently. Added -x and -y options to psign to control output dimensions directly. Decreased value of FTINY with SMLFLT option once again in an attempt to further reduce errors. Reinstated rtrace's capability to produce 32-bit_rle_rgbe directly. Added -S and -o options to rpict for more flexible production of multiple images and slave operation. Rpict will also accept a recover file name the same as the output file for more convenient recovery. Added ra_ps program to translate Radiance picture into PostScript file. ****** COMPATIBILITY CHANGE ******** Made ambient files machine-independent so they can be conveniently moved and reused on any system. Also added coordinated reads and writes so that multiple processes may use the same ambient file at the same time. Along with the -S option of rpict, this should greatly facilitate parallel rendering. The new ambient file format also contains a header that can be read by getinfo. Lookamb now has a -h option. Created rpiece program for parallel rendering of a single image on multiple processors and workstations. Eliminated star artifacts in mkillum distribution patterns by improving data interpolation method. Improved ability of mkillum to correctly sample non-axis-aligned polygons. Added -s and -o options to pcompos for slightly more convenient use of the -a option. Also eliminated incompatibility between -a and -y options. Fixed bug in spotlight sources that caused incorrect boundaries to be cast by mirrors. Fixed rounding of scanlines in ra_pr24 to 16-bit boundaries. Added @file and $envar expansion capabilities to rtrace, rpict and rview. This is primarily to overcome the 128-byte command limit of MS-DOS. Added -r option to gensky for the direct specification of solar brightness. Added -oN option to rtrace for reporting unperturbed surface normals, and changed -on to report perturbed surface normals (used to be unperturbed). Changed -di switch of rtrace, rpict and rview to -dv and changed sense. Thus, instead of having a boolean variable called "source invisibility" that is normally off, there is now a boolean variable called "source visibility" that is normally on. More logical, and also allows for the addition of -di and -de options for direct include and exclude in the future. Fixed bug in image.c associated with -DSMLFLT that caused angular fisheye views to repeat the center pixel in the middle of an image. Modified colordata and colorpict to take functions of a single variable instead of always requiring functions of three variables (red, green, blue). Modified objview script to work in original object coordinates. Added -P and -PP options to rpict and rtrace for persistent and parallel processing, respectively. The -P option is most useful with the -fr option of pinterp, since rtrace doesn't have to be restarted for every frame in a long animation sequence. The -PP option is most useful when running rpiece on a multiprocessing platform, to get acceptable memory sharing without the hassle of threaded code. Changed signal handling in rpict so CONT is now used to elicit asynchronous progress reports. ALRM now causes rpict to die unconditionally. Created executive program called "rad" to run oconv, rview, rpict and pfilt automatically. This should greatly simplify use of Radiance and reduce the problems associated with poorly chosen parameter values. Added slave driver to rview to make it easier to run from other graphics applications. (Thanks to Chris Nicholas of Sun for the suggestion.) Fixed error in ies2rad.c and source.cal that caused incorrect interpretation of asymmetric Type C (A) fixture photometry. Note the new definition of src_phi in source.cal. This change may affect manually entered photometry. Added '@' command to ximage to adjust exposure based on Blackwell's model of human contrast sensitivity. Added functions to pcomb to get the ray origin and direction from the input picture view specifications. Removed Fresnel approximation to specular reflection from Radiance materials, since the direct component was not being computed correctly. This may have a slight affect on the appearance of surfaces, but it can't be helped. ****** COMPATIBILITY CHANGE ******** Changed the definition of the BRTDfunc type so as to be more general and to allow for different reflection properties depending on what side of the surface the ray is incident. Any scene and function files using the old definition of BRTDfunc must be updated. Implemented the approximation used in Window 4 to reflection from coated glazings in lib/glazing.cal. Added -ti, -te, -tI and -tE options to rtrace for including or excluding surfaces from those reported by the trace output specifier. Fixed long-standing bug in pfilt gaussian filter option, which caused the image to be excessively defocused. Added -m option to pfilt for image sample smoothing. This helps get rid of some of the "speckle" associated with specular sampling. Made -ovt* compatible with -I option of rtrace. Changed ximage to work with multiple pictures. It now opens one window for each picture file. Fixed error reporting in rpict for most machines. (Many thanks to Peter Apian-Bennewitz for his help and suggestions.) ****** COMPATIBILITY CHANGE ******** Added intermediate sky to gensky and changed its options slightly. The new gensky uses a new version of skybright.cal, so any old gensky output in files must be recomputed with the new gensky before it will work. (A "skybright: undefined" error should clue you in.) ========================== Version 2.3 (Released 11/16/93) No changes from the above, but the official release was designated 2.3 to avoid confusion with previous beta releases of 2.2. ========================== Version 2.4 (Released 4/20/94) Philip Thompson of MIT added use of a radiance.gamma resource to ximage and we added it to the x11 driver of rview as well. This is an alternative to setting the GAMMA environment variable for X11 servers. Added MLIB variable to Rmakefile's for defining alternate math libraries. I discovered that the default version of sqrt() under IRIX is a whole lot slower than what's in the libfastm.a library, and not much better. This can make a significant difference to the renderers, since sqrt() is relied on quite a bit, and it's assumed to be fast. Added =SS option to pcompos to allow anchor points for image positions other than the lower left corner. Wrote raddepend script for finding dependencies in scene files. Fixed a bug in mkillum that caused it to incorrectly sample ring sources. Finally allowed mixtures to work with materials, thanks to the encouragement and advice of Peter Apian-Bennewitz. Wrote a triangular mesh converter, called tmesh2rad. I defined my own format, since I wasn't too familiar with anyone else's format and I wanted to support some additional possibilities (most notably patterns). Added initial "#?RADIANCE" line to headers to simplify Radiance file identification by programs used to magic numbers. Created a translator for Wavefront .obj files, called obj2rad. It uses the same type of mapping rules as arch2rad. ============================= Version 2.5 (Released 6/26/95) Wrote translators to and from the new MGF (Materials and Geometry Format) specification. Changed color conversion routines to make light source colors (from lamp.tab) consistent with uniform white light standard. Fixed a bug that caused very small local sources not to be sampled at all! Added the ability for rview to read commands from its standard input under X11. ****************** COMPATIBILITY CHANGE *********************** Changed GAMMA environment variable to DISPLAY_GAMMA, to bring it in line with the xli program, so users don't have to give two variables for the same value! Added -t (touch) option to rad, to make it easier to deal with minor changes to input files. Created graphical user interface to rad, called trad. Based on Tcl/Tk, this should finally get people to start using this program! Added -vo and -va (view fore and view aft) clipping plane options to Radiance view parameters. Added -bv option for (opaque) back face visibility control. Added -q, -a and -e options to pinterp, and made it faster. (These should be big improvements.) Created tabfunc program for converting data tables to functional language. Wrote mgf2meta program to convert MGF data to line drawing. Updated ies2rad program to interpret MGF geometry in IESNA-LM-63-1995 files. Added sorting of ambient values according to access times to improve reference locality for better virtual memory performance. Added source solid angle argument to BRTD functions for averaging values. Wrote genclock program to create an analog clock. Fixed a bug for bitmaps using hexbit4x1.fnt with brighttext, which caused thin lines to appear. ============================= Version 3.0 (Released 6/19/96) Added comments to data and font files. Changed behavior of mirror to allow void alternate material. Added cylindrical view type for Quicktime VR authoring and other interesting applications. Increased default rtrace parameters for more accurate calculations when options are not specified. Added RAWFILE and ZFILE variables to rad for saving raw picture file and Z (distance) information from rpict. Ported trad for newer (4.0) version of Tk (wish). Thanks to Bob Lipman of NIST for helping me track down the changes. Added -B option to pinterp to blur multiple views into a single image, useful for motion blur and depth of field simulation. Created pdfblur script and modified vwright to automate depth-of-field simulation with pinterp. Added -c option for color PostScript output from ra_ps, and made both this program and psmeta produce EPS-compatible files. Created macbethcal program for calibrating color image scanners and film recorders or printers using the Macbeth ColorChecker chart. Created ra_xyze program for converting to and from new Radiance CIE XYZE picture type and calibrating monitor colors. Modified Radiance picture filters (pcompos, pflip, pcomb, pinterp, protate and pfilt) to handle new picture type without complaint. Added automatic ambient value computation to improve accuracy of results no matter what -av value is given. (Only works for -ab > 0.) This was a fairly obvious optomization I should have thought of ages ago. (Default is old behavior -- -aw option puts in new code.) Modified interreflection calculation to take textures (surface normal perturbations) into account in indirect illumination. This should improve the accuracy and appearance of textured surfaces in shadowed regions. Added -T option to rpiece to limit execution time. Fixed bug in mixtext type introduced in last release -- caused improper calculation of mixed modifiers. Added basic options and functionality for participating media. New material type "mist" and rendering options -me, -ma, -mg and -ms. This should permit the modeling of visible light beams, uniform smoke, fog, and some types of clouds. Added -o option to ximage to control output of 't' command (and middle mouse button). This adds the ability to produce pixel position, radiance value and luminance. The default action is the same as before. Created pmblur script to generate views for camera motion blur in walk-through animations. Added "inpic" variable to picture.cal for determining when the edge of a non-repeating image has been reached. Use with mixfunc primitive. Created ranimate program to control walk-through and dynamic animations on multiple hosts. Fixed problem with antimatter type referring to final definition of material names. Now, it uses the most recent ones. Added an MC macro for true Monte Carlo sampling rather than the default Quasi Monte Carlo. To enable, add -DMC to the OPT= line in rmake. Fixed bug in pfilt -m option that caused floating point exceptions on Alphas. Wrote xyzimage script for X11 display of XYZE and corrected RGBE pictures. Takes the same options as ximage with an added -p option, and checks the environment variable DISPLAY_PRIMARIES for setting of monitor primaries. (See the ra_xyze manual page for further explanation.) Made colorpict's use much less memory by storing data in RGBE format rather than floating point (takes 1/3 the space). This should help with large image patterns. At the insistence of Henrik Wann Jensen, changed the specular sampling code so that very rough specular surfaces will sample more truly, eliminating some strange mirror appearances evident using the old method. Added drawing of small and skinny light sources so rpict won't miss these from inadequate image sampling. The method used may not work perfectly for warped views (-vta, -vth and -vtc) having long, cylindrical light sources. (Rob Shakespeare, take note!) Added corner rounding to genprism command (-r option). Changed mixtures so that mixing material with void is allowed, allowing for opacity maps. Also altered general behavior so that surfaces without materials in their modifier list are invisible, not only surfaces with void modifiers. ****************** COMPATIBILITY CHANGE *********************** The behavior of xform has been changed to make object library organization and usage simpler. 1) The RAYPATH directories are searched for matching file names. 2) Filenames beginning with '.', '/' or '~' do not result in searches. 3) Xform performs a chdir to the found file's directory, obviating the need for peculiar inclusion names in subdirectories. 4) The array option (-a) now works when xform reads from stdin. 5) The expand option (-e) is now the default -- -c gets back old behavior. ============================= Version 3.1 (Released 7/24/97) Changed gensky so it will accept hour specifications as HH:MM, with designations for standard North American and European time zones. Increased buffer size for in-line commands from 512 to 1024. Added T(n), S(n), WE and pa(n) functions and constants to pcomb. Created histo utility to compute 1-dimensional histograms from data files. Created pacuity, pveil and psquish scripts (later combined in "pcond"): o The pacuity program takes a Radiance picture and defocuses it in places where the human eye loses resolution. Unless the scene contains very low luminances (below .1 cd/m^2 or so), this will not have an appreciable effect. The output can then be adjusted according to the Ferwerda, Pattanaik and Shirley tone mapping function using pcomb with the file src/cal/cal/ferwerda.cal. (See the header comments therein.) o The pveil program finds sources of glare in an image and adds a corresponding amount of background luminance surrounding each glare source according to the adaptation response of the human eye. This has the effect of reducing contrast around glare sources. o The psquish program is probably the most useful of the three, and must be applied after the other two if the others are used. With the -a option, psquish uses the human visual response to compress the dynamic range of an image to fit within the limited dynamic range of a display (assumed to go from 1 to 100 cd/m^2), and also reduces color visibility in pictures with low light levels (below 1 cd/m^2). Without the -a option, psquish simply does the best it can to fit a picture's dynamic range into what can be readily displayed, without regard to human visual response. This has the effect of making problem scenes viewable, such as indoor scenes with windows looking out to bright exteriors. Created pcond program, which combines pacuity, pveil and psquish in a more efficient, robust package. (See man page for details.) Renamed Perlin noise function partial functions, noise3a(), noise3b() and noise3c() to noise3x(), noise3y() and noise3z(). Added backward compatibility defines to rayinit.cal so nothing should be broken. Fixed double-counting bug in calculation of specular transmission of light sources for trans type. This might have caused unrealistically high estimates for illumination beneath trans surfaces with non-zero roughnesses when the interreflection calculation was used (-ab 1). Added routines for reading and writing separate RGB files in pvalue. Also added -pP (where P is one of 'R', 'G' or 'B' upper or lower case) and -s option to skip specified number of bytes on header. Finally, added a -n option for non-interleaved RGB input and output. Fixed obscure bug in rcalc that caused it to return "Bad call to argument!" for certain combinations of function and output channel definitions. Added "-e auto" and "-e human" options to ximage(1) and corresponding 'a' and 'h' commands to perform dynamic range compression similar to pcond(1). ============================== Version 3.4 Fixed bug in rpiece that caused it to incorrectly compute -vs and -vl (view shift and lift) offsets. (Included in 3.1.1.) Fixed bug in xform handling mist's with > 5 real arguments. (Included in 3.1.1.) Fixed bug in mist handling routines that caused some incorrect calculations for distant sources. (Included in 3.1.1.) Added ability for lam utility to read from commands. Created vwrays command to compute ray origins and directions for specified views or pictures. Changed rtrace behavior to send bogus record when ray direction is zero. (Before, it only flushed values with no corresponding record.) This change was needed to facilitate its use with the new vwrays program. Modified ies2rad so that it no longer produces glow sources for the sides of objects, which caused unnatural dark bands near the ceilings of direct/indirect installations. (Included in 3.1.4.) Fixed bug in rpiece that caused the -pa option to fail. (Included in 3.1.2.) Made ximage emphasize pixels in the selected region for the 'a' and 'h' commands to adjust the exposure using histogram compression. (Included in 3.1.4.) Fixed bug in trad which caused it to fail when there were tabs in the input. (Included in 3.1.3.) Fixed bug in pcond that caused it to white-out borders of some fisheye views. (Included in 3.1.3.) Added facility to ra_tiff to read and write new LogLuv high dynamic-range image formats. Changed ambient value averaging in rendering programs (-aw option) to use geometric mean rather than arithmetic mean, which tended to arrive at too-high estimates and cause runaway calculations. (Included in 3.1.4.) Added -g, -p, -m and -d options for gamma, paper size, margins and dpi to the ra_ps program. This allows for much better control over output to PostScript printers. Fixed compiles for AIX -- select() incompatibility and macro conflicts. (Included in 3.1.6.) Increased table sizes to allow up to 4 million primitives when -DBIGMEM is defined, provided there's enough virtual memory to hold them! Fixed error in viewloc() for computing view locations for cylindrical views. Wrote rholo, rhcopy, rhpict, and rhoptimize programs for holodeck creation, display, and manipulation. This is a much more powerful way to view a model than rview, though it lacks many of the utility commands. Added the ability to separate concatanated animation frames using ra_rgbe. This output facility of rpict was previously useless because nothing could get anything past the first frame. Wrote compamb program to compute a good ambient value for a rad input file. Using this script is preferable to setting the -aw option of rpict, which seems to result in splotchy artifacts in many situations. Changed rad so it doesn't use the -aw option, which was causing some rather annoying artifacts. (Added as patch to 3.1.8.) Modified ranimate to change directories before running transfer or archive commands. Added -pm option to rpict to perform jittered motion blurring. Created phisto script and added -I option to pcond for computing multiple, identical exposures. Fixed time zone specifications in gensky. (Added as patch to 3.1.9.) Fixed bug in mixture functions that caused erroneous modifier loops. (Added as patch to 3.1.10.) Wrote glrad program for interactive display of Radiance scenes using OpenGL. Modified objview program to use rad and glrad for rendering. Changed the way ray weights are computed for participating media (including dielectrics) so they more accurately reflect a ray's contribution, avoiding some artifacts with unsealed dielectric objects and the ambient calculation. Fixed problem with dielectric materials with textures where rays that should have penetrated or reflected do the opposite. Created ra_hexbit program to generate bitmap files for use with hexbit4x1.fnt. ****************** COMPATIBILITY CHANGE *********************** Altered mixtures to take the most recent modifier definition rather than the last one in the entire description. Made the same change for illum's and mirror's. Also, fixed a bug in the antimatter type where it didn't always get the correct material for shading. Wrote normtiff program to quickly tone-map and convert Radiance pictures and SGILOG-encoded TIFF's to flat RGB TIFF output. Added -r option to protate for CCW rotations. Added ability to load values from read-only ambient file in rpict, rtrace and rview. This may be useful when starting with the same values on many processors, where NFS lock contention would slow things down if they also wrote values back to the file. Wrote rhinfo program for printing out holodeck section information. Modified rad "scene" variable to allow in-line command specifications. Added added -s and -b options to ra_ppm for changing output scale and forcing greyscale output. Now allow negative distances for the fore clipping plane in rpict. This may be useful for rendering holographic stereograms. Added -f option to xform to read arguments from files. This can save a lot of scene loading time by reducing multiple xform invocations. Added support for 15-bit TrueColor visuals in ximage. Added (undocumented) -P option to macbethcal for picking chart corners directly using ximage. Added -r option to rholo for opening holodeck files read-only. Added correction factor for solid angle change in dielectrics as noted in Eric Veach's thesis. Added von Kries white balance transform for color conversion using CMCCAT2000 matrix. Added CAPDATE field to rendering headers to record render date.