RELEASE
:
09-035
Segment of Ares I-X Test Rocket Arrives at Kennedy
CAPE CANAVERAL, Fla. -- The last newly manufactured section of the Ares I-X test rocket arrived at the Assembly and Refurbishment Facility of NASA's Kennedy Space Center on Friday.
Called the frustum, the section resembles a giant funnel. Its function is to transition the primary flight loads from the rocket's upper stage to the first stage. The frustum is located between the forward skirt extension and the upper stage of the Ares I-X.
“It is always great to get the hardware to the launch site, and once the motors arrive in just a few weeks, the entire launch vehicle can begin final processing prior to stacking operations in the Vehicle Assembly Building,” said Jon Cowart, the Ares I-X deputy mission manager at Kennedy.
The Ares I-X is targeted to launch in the summer of 2009. The flight will provide NASA with an early opportunity to test and prove hardware, facilities and ground operations associated with the Ares I launch vehicle. The flight test also will bring NASA a step closer to its exploration goals of sending humans to the moon and destinations beyond.
The frustum is manufactured by Major Tool and Machine Inc. in Indiana under a subcontract with Alliant Techsystems Inc., or ATK, the Ares first stage prime contractor. Weighing in at approximately 13,000 pounds, the 10-foot-long section is composed of two aluminum rings attached to a truncated conic section. The large diameter of the cone is 18 feet and the small diameter is 12 feet. The cone is 1.25 inches thick.
“We are thrilled to deliver this final segment to the ground processing team at Kennedy,” said Bob Herman, ATK’s Florida site director. “The arrival of the frustum is a significant milestone.
Much rigorous design, development and testing had to be accomplished prior to manufacturing all of the new segments that make up the Ares I-X first stage.”
The frustum will be integrated with the forward skirt and forward skirt extension, which already are in the Assembly and Refurbishment Facility. That will complete the forward assembly. The assembly then will be moved to the Vehicle Assembly Building for stacking operations, which are scheduled to begin in April.
Video B-roll of the hardware arrival will be available on NASA Television's Video File. For NASA TV streaming video, schedules, and downlink information, visit:
http://www.nasa.gov/ntv
For more information about Ares I-X and NASA's next-generation rockets, visit:
http://www.nasa.gov/ares
- end -
text-only version of this release
NASA press releases and other information are available automatically by sending a blank e-mail message to
hqnews-subscribe@mediaservices.nasa.gov.
To unsubscribe from this mailing list, send a blank e-mail message to
hqnews-unsubscribe@mediaservices.nasa.gov.
Back to NASA Newsroom |
Back to NASA Homepage
