Grid export format (.gxf). A description of GXF format follows. _________________________ Projection: Lambert Conformal Conic Datum: NAD-27-USA Ellipsoid: Clarke 1866 Base Latitude: 0° Central Meridian: -100° Standard Parallels: 33° N. and 45° N. Major Axis: 6378206.4 Eccentricity: 0.08227185422 Prime Meridian: 0 _________________________ texas_mag file: No. of Columns: 1364 No. of Rows: 1268 Origin of all grids: -658000 meters East 315800 meters North Grid Interval: 1000 meters Location of the grid value within the cell: lower left corner Rotation: None Dummy value: -9999.000 texas_cbggrav and texas_isograv files: No. of Columns: 658 No. of Rows: 602 Origin of all grids: -666000 meters East 316800 meters North Grid Interval: 2000 meters Location of the grid value within the cell: lower left corner Rotation: None Dummy value: -9999.000 ------------------------------------------------------------------------ ------------------------------------------------------------------------ Grid eXchange Format (.gxf files) GXF (Grid eXchange File) is a standard ASCII file format for exchanging gridded data among different software systems. Software that supports the GXF standard will be able to import properly formatted GXF files and export grids in GXF format. Grid Description: A grid is a rectangular array of points at which single data values define a two dimensional function. Grid point locations are related to a Grid Coordinate System (GCS), which is a right-handed Cartesian system with X and Y axis defined by the bottom and left sides of a grid array. The grid point at the bottom, left corner of the array is the origin of the GCS. All distances are in meters. GCS coordinates are related to a Base Coordinate System (BCS) through a plane translation and rotation. The origin of the GCS is located at point (X0,Y0) in the BCS, and the X and Y grid indices are related to BCS units through the separation between points in the GCS X and Y directions. Labeled Data Objects and Comments: A GXF file is an ASCII file made up of a number of labeled data objects and comments. Each labeled data object has a label line followed by one or more data lines. A label line is identified by a '#' character in the first column followed immediately by an upper-case label. The data associated with that label are found on one or more lines that follow the label. Lines: All lines in a GXF file must be less than or equal to 80 characters in length. Any lines that are not part of a labeled data object are ignored and can be used to place comments within a GXF file. Programs that read GXF files will skip such comment lines while they search for the next GXF data object. ------------------------------------------------------------------------ GXF Object Definitions: #TITLE A one line descriptive title of the grid. Some grid formats include textual descriptions of the grid, and this information can be placed in a #TITLE object. Default: blank title #POINTS The number of points in each grid row (horizontal or vertical as defined by the #SENSE object). Default: no default - this object is required. #ROWS The number of rows in the grid. A grid row (or vector) is a collection of consecutive grid points that represent the grid values along a horizontal or vertical line in the grid. The complete grid is then defined by a consecutive sequence of grid rows. Default: no default - this object is required. #PTSEPARATION The separation between points in the grid. This should be in Base Coordinate System units (ground units for geographically based grids). Default: 1.0 #RWSEPARATION The separation between rows in the grid. These should be in Base Coordinate System units (ground units for geographically based grids). Default: 1.0 #XORIGIN The X location of the bottom left corner of the grid in the Base Coordinate System. Default: 0.0 #YORIGIN The Y location of the bottom left corner of the grid in the Base Coordinate System. Default: 0.0 #ROTATION The rotation angle of the grid. This is the counter-clockwise angle of the bottom edge of the grid with respect to the Base Coordinate System X axis. Rotation only has meaning for Base Coordinate Systems that use the same units on the X and Y axis. Default: 0.0 #SENSE The first point of the first row of the stored grid can be at any corner of the grid rectangle, and the grid rows can be run vertically or horizontally. The SENSE object defines this storage sense as follows: 1 first point at bottom left of grid 2 first point at upper left of grid 3 first point at upper right of grid 4 first point at bottom right of grid A positive SENSE stores rows in a right-handed sense; a negative SENSE stores rows in a left-handed sense. This means that if you were at the first grid point and looking into the grid, the first grid row would extend to your right for a right-handed grid (positive sense), or to your left for a left-handed grid (negative sense). (All grids in this report have SENSE=+1.) Default: 1 (first point at bottom left, rows left to right) #TRANSFORM This keyword is followed by two numbers on the same line: SCALE and OFFSET, which are used to transform the grid data to desired units: Z = G * SCALE + OFFSET where Z grid value in the desired unit G grid values as specified in the #GRID object Default: SCALE = 1.0, OFFSET = 0.0 #DUMMY The grid must be rectangular (every row must have the same number of points). The dummy value defined by this object is used to define blank areas of the grid. Any grids that include blank areas must define a dummy value. Default: no dummy value. #GRID The grid data is listed point by point and row by row. The #GRID object and data is always the last object in a GXF file. The first data point is at the location indicated by #SENSE, and is followed by successive points in that row of points (either horizontal or vertical), then the points in the next row, and so on. The points in a row can follow on to the next data line, although each new row must start on a new data line. A GXF reading program can expect #ROWS of #POINTS for a total of #ROWS times #POINTS data values. Default: none, must be included as the last object in a GXF file. ------------------------------------------------------------------------