! Started logfile: J0415+7753_S_2006_02_16_yyk_uvs.log on Wed Jul  5 11:22:54 2006
obs J0415+7753_S_2006_02_16_yyk_uva.fits
! Reading UV FITS file: J0415+7753_S_2006_02_16_yyk_uva.fits
! AN table 1: 878 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.32779 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0415+7753
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2421 lines of history.
! 
! Reading 51804 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0415+7753_S_2006_02_16_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.116696 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.357 mas, bmaj=23.32 mas, bpa=53.23 degrees
! Estimated noise=2.20458 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0839334 Jy
! Component: 100  -  total flux cleaned = 0.117764 Jy
! Total flux subtracted in 100 components = 0.117764 Jy
! Clean residual min=-0.011222 max=0.011421 Jy/beam
! Clean residual mean=0.000314 rms=0.004788 Jy/beam
! Combined flux in latest and established models = 0.117764 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.117764 Jy
! 
! Correcting IF 1.
!  A total of 75 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 74 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 74 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 74 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.061776Jy  sigma=1.165778
! Fit after  self-cal, rms=0.061529Jy  sigma=1.158536
! Inverting map and beam 
! Estimated beam: bmin=8.357 mas, bmaj=23.32 mas, bpa=53.23 degrees
! Estimated noise=2.20458 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.564 mas, bmaj=22.65 mas, bpa=52.89 degrees
! Estimated noise=1.10679 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0160974 Jy
! Component: 100  -  total flux cleaned = 0.0221009 Jy
! Component: 150  -  total flux cleaned = 0.0224246 Jy
! Component: 200  -  total flux cleaned = 0.0203708 Jy
! Total flux subtracted in 200 components = 0.0203708 Jy
! Clean residual min=-0.003223 max=0.003227 Jy/beam
! Clean residual mean=0.000092 rms=0.001857 Jy/beam
! Combined flux in latest and established models = 0.138135 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 129 model components to the UV plane model.
! The established model now contains 154 components and 0.138135 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055016Jy  sigma=1.029422
! Fit after  self-cal, rms=0.054970Jy  sigma=1.028258
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.564 x 22.65 at 52.89 degrees (North through East)
! Clean map  min=-0.0065271  max=0.085992 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.01859
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        0.95     HN        1.00*    KP        1.01     
!   LA        1.05     MK        1.00*    NL        1.00*    OV        0.96     
!   PT        0.96     SC        1.00*    
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.995149
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.05     HN        1.00*    KP        0.96     
!   LA        1.09     MK        1.00*    NL        1.00*    OV        0.96     
!   PT        0.89     SC        1.00*    
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.992651
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.99     HN        1.00*    KP        1.04     
!   LA        0.85     MK        1.00*    NL        1.00*    OV        1.14     
!   PT        0.95     SC        1.00*    
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.054970Jy  sigma=1.028258
! Fit after  self-cal, rms=0.053844Jy  sigma=1.011057
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053844Jy  sigma=1.011057
! Fit after  self-cal, rms=0.053814Jy  sigma=1.010402
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.718 mas, bmaj=23.02 mas, bpa=52.36 degrees
! Estimated noise=1.10265 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00146718 Jy
! Component: 100  -  total flux cleaned = 0.00207768 Jy
! Component: 150  -  total flux cleaned = 0.00219044 Jy
! Component: 200  -  total flux cleaned = 0.00249257 Jy
! Total flux subtracted in 200 components = 0.00249257 Jy
! Clean residual min=-0.001162 max=0.001152 Jy/beam
! Clean residual mean=0.000019 rms=0.000609 Jy/beam
! Combined flux in latest and established models = 0.140628 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 96 model components to the UV plane model.
! The established model now contains 250 components and 0.140628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053026Jy  sigma=0.998309
! Fit after  self-cal, rms=0.053007Jy  sigma=0.997765
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053007Jy  sigma=0.997765
! Fit after  self-cal, rms=0.048554Jy  sigma=0.904916
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000704565 Jy
! Component: 100  -  total flux cleaned = -0.000128615 Jy
! Component: 150  -  total flux cleaned = -0.000298807 Jy
! Component: 200  -  total flux cleaned = -0.000546333 Jy
! Total flux subtracted in 200 components = -0.000546333 Jy
! Clean residual min=-0.000732 max=0.000725 Jy/beam
! Clean residual mean=0.000007 rms=0.000371 Jy/beam
! Combined flux in latest and established models = 0.140081 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 98 model components to the UV plane model.
! The established model now contains 341 components and 0.140082 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048079Jy  sigma=0.899079
! Fit after  self-cal, rms=0.047805Jy  sigma=0.893736
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.718 x 23.02 at 52.36 degrees (North through East)
! Clean map  min=-0.0054828  max=0.086561 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.773 mas, bmaj=22.98 mas, bpa=50.76 degrees
! Estimated noise=1.12366 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000216222 Jy
! Component: 100  -  total flux cleaned = -0.000271397 Jy
! Component: 150  -  total flux cleaned = -0.000312347 Jy
! Component: 200  -  total flux cleaned = -0.000433764 Jy
! Total flux subtracted in 200 components = -0.000433764 Jy
! Clean residual min=-0.000486 max=0.000484 Jy/beam
! Clean residual mean=0.000005 rms=0.000240 Jy/beam
! Combined flux in latest and established models = 0.139648 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 84 model components to the UV plane model.
! The established model now contains 416 components and 0.139648 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047670Jy  sigma=0.892217
! Fit after  self-cal, rms=0.047638Jy  sigma=0.891674
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.399 mas, bmaj=23.44 mas, bpa=53.1 degrees
! Estimated noise=2.19428 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0857861 Jy
! Component: 100  -  total flux cleaned = 0.11917 Jy
! Component: 150  -  total flux cleaned = 0.122222 Jy
! Component: 200  -  total flux cleaned = 0.127968 Jy
! Total flux subtracted in 200 components = 0.127968 Jy
! Clean residual min=-0.005068 max=0.005103 Jy/beam
! Clean residual mean=0.000152 rms=0.002450 Jy/beam
! Combined flux in latest and established models = 0.127968 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 87 model components to the UV plane model.
! The established model now contains 87 components and 0.127968 Jy
! Inverting map and beam 
! Estimated beam: bmin=8.718 mas, bmaj=23.02 mas, bpa=52.36 degrees
! Estimated noise=1.10265 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0030915 Jy
! Component: 100  -  total flux cleaned = 6.84276e-06 Jy
! Component: 150  -  total flux cleaned = -0.00277165 Jy
! Component: 200  -  total flux cleaned = -0.00473918 Jy
! Total flux subtracted in 200 components = -0.00473918 Jy
! Clean residual min=-0.001936 max=0.001925 Jy/beam
! Clean residual mean=0.000026 rms=0.001027 Jy/beam
! Combined flux in latest and established models = 0.123229 Jy
! Adding 93 model components to the UV plane model.
! The established model now contains 180 components and 0.123229 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.773 mas, bmaj=22.98 mas, bpa=50.76 degrees
! Estimated noise=1.12366 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000861213 Jy
! Component: 100  -  total flux cleaned = 0.000865 Jy
! Component: 150  -  total flux cleaned = 0.000956368 Jy
! Component: 200  -  total flux cleaned = 0.00165068 Jy
! Total flux subtracted in 200 components = 0.00165068 Jy
! Clean residual min=-0.000890 max=0.000881 Jy/beam
! Clean residual mean=0.000015 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.12488 Jy
! Adding 118 model components to the UV plane model.
! The established model now contains 295 components and 0.12488 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=8.718 mas, bmaj=23.02 mas, bpa=52.36 degrees
! Estimated noise=1.10265 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000471221 Jy
! Component: 100  -  total flux cleaned = -0.000518008 Jy
! Component: 150  -  total flux cleaned = -0.000613573 Jy
! Component: 200  -  total flux cleaned = -0.000616458 Jy
! Total flux subtracted in 200 components = -0.000616458 Jy
! Clean residual min=-0.000512 max=0.000516 Jy/beam
! Clean residual mean=0.000003 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.124263 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 86 model components to the UV plane model.
! The established model now contains 377 components and 0.124263 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047630Jy  sigma=0.891475
! Fit after  self-cal, rms=0.047618Jy  sigma=0.891310
wmodel J0415+7753_S_2006_02_16_yyk\_map.mod
! Writing 377 model components to file: J0415+7753_S_2006_02_16_yyk_map.mod
wobs J0415+7753_S_2006_02_16_yyk\_uvs.fits
! Writing UV FITS file: J0415+7753_S_2006_02_16_yyk_uvs.fits
wwins J0415+7753_S_2006_02_16_yyk\_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: muppet]
! 
wmap "J0415+7753_S_2006_02_16_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.718 x 23.02 at 52.36 degrees (North through East)
! Clean map  min=-0.0059386  max=0.087212 Jy/beam
! Writing clean map to FITS file: J0415+7753_S_2006_02_16_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0872122 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000265995 
device "J0415+7753_S_2006_02_16_yyk\_map.eps/VPS"
! Attempting to open device: 'J0415+7753_S_2006_02_16_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.914991 0.914991 1.82998 3.65996 7.31993 14.6399 29.2797 58.5594
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0007 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.087 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.718 x 23.02 at 52.36 degrees (North through East)
! Clean map  min=-0.0059386  max=0.087212 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0415+7753_S_2006_02_16_yyk\_map.gif/gif"
! Attempting to open device: 'J0415+7753_S_2006_02_16_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0415+7753_S_2006_02_16_yyk_uvs.log closed on Wed Jul  5 11:23:11 2006