! Started logfile: J0555+3948_X_2006_02_16_yyk_uvs.log on Wed Jul 5 11:31:22 2006 obs J0555+3948_X_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J0555+3948_X_2006_02_16_yyk_uva.fits ! AN table 1: 439 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.96983 visibilities/baseline/integration-bin. ! Found source: J0555+3948 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2424 lines of history. ! ! Reading 76636 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0555+3948_X_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 3.15244 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6953 mas, bmaj=2.43 mas, bpa=-34.8 degrees ! Estimated noise=1.74773 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.34881 Jy ! Component: 100 - total flux cleaned = 3.01067 Jy ! Total flux subtracted in 100 components = 3.01067 Jy ! Clean residual min=-0.165483 max=0.228086 Jy/beam ! Clean residual mean=-0.001547 rms=0.045926 Jy/beam ! Combined flux in latest and established models = 3.01067 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 3.01067 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.882378Jy sigma=14.182328 ! Fit after self-cal, rms=0.884295Jy sigma=14.047510 ! Inverting map and beam ! Estimated beam: bmin=0.6953 mas, bmaj=2.43 mas, bpa=-34.8 degrees ! Estimated noise=1.74773 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9014 mas, bmaj=2.524 mas, bpa=-35.91 degrees ! Estimated noise=1.05181 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.503023 Jy ! Component: 100 - total flux cleaned = 0.763504 Jy ! Component: 150 - total flux cleaned = 0.921826 Jy ! Component: 200 - total flux cleaned = 1.02639 Jy ! Total flux subtracted in 200 components = 1.02639 Jy ! Clean residual min=-0.125221 max=0.126199 Jy/beam ! Clean residual mean=-0.000108 rms=0.032558 Jy/beam ! Combined flux in latest and established models = 4.03707 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 28 components and 4.03707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.663290Jy sigma=9.133177 ! Fit after self-cal, rms=0.662583Jy sigma=9.116350 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9014 x 2.524 at -35.91 degrees (North through East) ! Clean map min=-0.11949 max=2.8339 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.999528 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 0.98 KP 0.95 ! LA 0.96 MK 1.06 NL 1.21 OV 0.94 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01493 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.98 KP 0.90 ! LA 0.92 MK 1.03 NL 1.17 OV 0.92 ! PT 1.03 SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00017 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 0.92 KP 0.84 ! LA 0.94 MK 1.05 NL 1.15 OV 0.96 ! PT 1.05 SC 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.979273 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.05 HN 0.96 KP 0.87 ! LA 0.93 MK 1.06 NL 1.13 OV 1.00 ! PT 1.13 SC 1.06 ! ! ! Fit before self-cal, rms=0.662583Jy sigma=9.116350 ! Fit after self-cal, rms=0.568558Jy sigma=7.216145 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.568558Jy sigma=7.216145 ! Fit after self-cal, rms=0.569055Jy sigma=7.220180 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9329 mas, bmaj=2.501 mas, bpa=-35.8 degrees ! Estimated noise=1.05351 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0917723 Jy ! Component: 100 - total flux cleaned = -0.0940041 Jy ! Component: 150 - total flux cleaned = -0.0928015 Jy ! Component: 200 - total flux cleaned = -0.0904107 Jy ! Total flux subtracted in 200 components = -0.0904107 Jy ! Clean residual min=-0.070458 max=0.050317 Jy/beam ! Clean residual mean=0.000238 rms=0.014071 Jy/beam ! Combined flux in latest and established models = 3.94665 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 3.94665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.549393Jy sigma=6.859056 ! Fit after self-cal, rms=0.549747Jy sigma=6.861321 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.549747Jy sigma=6.861321 ! Fit after self-cal, rms=0.258127Jy sigma=3.756158 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00292021 Jy ! Component: 100 - total flux cleaned = -0.00270233 Jy ! Component: 150 - total flux cleaned = -0.00447255 Jy ! Component: 200 - total flux cleaned = -0.00445532 Jy ! Total flux subtracted in 200 components = -0.00445532 Jy ! Clean residual min=-0.061208 max=0.057232 Jy/beam ! Clean residual mean=0.000211 rms=0.014091 Jy/beam ! Combined flux in latest and established models = 3.9422 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 47 components and 3.9422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246127Jy sigma=3.619646 ! Fit after self-cal, rms=0.231267Jy sigma=3.501117 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9329 x 2.501 at -35.8 degrees (North through East) ! Clean map min=-0.05712 max=2.9005 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.231267Jy sigma=3.501117 ! Fit after self-cal, rms=0.182030Jy sigma=2.697663 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182030Jy sigma=2.697663 ! Fit after self-cal, rms=0.180564Jy sigma=2.686788 ! Inverting map and beam ! Estimated beam: bmin=0.9361 mas, bmaj=2.474 mas, bpa=-35.34 degrees ! Estimated noise=1.05293 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0527867 Jy ! Component: 100 - total flux cleaned = -0.0559111 Jy ! Component: 150 - total flux cleaned = -0.0538678 Jy ! Component: 200 - total flux cleaned = -0.0521003 Jy ! Total flux subtracted in 200 components = -0.0521003 Jy ! Clean residual min=-0.044059 max=0.031977 Jy/beam ! Clean residual mean=0.000243 rms=0.009339 Jy/beam ! Combined flux in latest and established models = 3.8901 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 53 components and 3.8901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153636Jy sigma=2.226718 ! Fit after self-cal, rms=0.153333Jy sigma=2.223129 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153333Jy sigma=2.223129 ! Fit after self-cal, rms=0.138085Jy sigma=2.016280 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138085Jy sigma=2.016280 ! Fit after self-cal, rms=0.138076Jy sigma=2.016120 ! Inverting map and beam ! Estimated beam: bmin=0.9344 mas, bmaj=2.467 mas, bpa=-35.25 degrees ! Estimated noise=1.05095 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0370014 Jy ! Component: 100 - total flux cleaned = -0.0359697 Jy ! Component: 150 - total flux cleaned = -0.0335924 Jy ! Component: 200 - total flux cleaned = -0.0316944 Jy ! Total flux subtracted in 200 components = -0.0316944 Jy ! Clean residual min=-0.032143 max=0.022972 Jy/beam ! Clean residual mean=0.000211 rms=0.006885 Jy/beam ! Combined flux in latest and established models = 3.8584 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 57 components and 3.8584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121234Jy sigma=1.728575 ! Fit after self-cal, rms=0.121102Jy sigma=1.726450 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.393 mas, bmaj=2.764 mas, bpa=-32.77 degrees ! Estimated noise=1.29615 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00469294 Jy ! Component: 100 - total flux cleaned = 0.00442681 Jy ! Component: 150 - total flux cleaned = 0.00444833 Jy ! Component: 200 - total flux cleaned = 0.00445467 Jy ! Total flux subtracted in 200 components = 0.00445467 Jy ! Clean residual min=-0.034012 max=0.021240 Jy/beam ! Clean residual mean=0.000480 rms=0.008264 Jy/beam ! Combined flux in latest and established models = 3.86286 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 63 components and 3.86286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120375Jy sigma=1.719961 ! Fit after self-cal, rms=0.120207Jy sigma=1.714776 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7021 mas, bmaj=2.392 mas, bpa=-34.5 degrees ! Estimated noise=1.76293 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.39674 Jy ! Component: 100 - total flux cleaned = 3.05061 Jy ! Component: 150 - total flux cleaned = 3.30952 Jy ! Component: 200 - total flux cleaned = 3.44533 Jy ! Total flux subtracted in 200 components = 3.44533 Jy ! Clean residual min=-0.039599 max=0.054193 Jy/beam ! Clean residual mean=-0.000562 rms=0.012345 Jy/beam ! Combined flux in latest and established models = 3.44533 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 3.44533 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9344 mas, bmaj=2.467 mas, bpa=-35.25 degrees ! Estimated noise=1.05095 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.157904 Jy ! Component: 100 - total flux cleaned = 0.245659 Jy ! Component: 150 - total flux cleaned = 0.30051 Jy ! Component: 200 - total flux cleaned = 0.336119 Jy ! Total flux subtracted in 200 components = 0.336119 Jy ! Clean residual min=-0.029079 max=0.028904 Jy/beam ! Clean residual mean=-0.000089 rms=0.007631 Jy/beam ! Combined flux in latest and established models = 3.78145 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 65 components and 3.78145 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.393 mas, bmaj=2.764 mas, bpa=-32.77 degrees ! Estimated noise=1.29615 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0409383 Jy ! Component: 100 - total flux cleaned = 0.0590405 Jy ! Component: 150 - total flux cleaned = 0.0640576 Jy ! Component: 200 - total flux cleaned = 0.0661093 Jy ! Total flux subtracted in 200 components = 0.0661093 Jy ! Clean residual min=-0.033292 max=0.021339 Jy/beam ! Clean residual mean=0.000359 rms=0.008061 Jy/beam ! Combined flux in latest and established models = 3.84756 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 71 components and 3.84756 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9344 mas, bmaj=2.467 mas, bpa=-35.25 degrees ! Estimated noise=1.05095 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00376292 Jy ! Component: 100 - total flux cleaned = -0.00427394 Jy ! Component: 150 - total flux cleaned = -0.00391238 Jy ! Component: 200 - total flux cleaned = -0.00356923 Jy ! Total flux subtracted in 200 components = -0.00356923 Jy ! Clean residual min=-0.029209 max=0.021778 Jy/beam ! Clean residual mean=0.000170 rms=0.006694 Jy/beam ! Combined flux in latest and established models = 3.84399 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 75 components and 3.84399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120347Jy sigma=1.701860 ! Fit after self-cal, rms=0.120062Jy sigma=1.696354 wmodel J0555+3948_X_2006_02_16_yyk\_map.mod ! Writing 75 model components to file: J0555+3948_X_2006_02_16_yyk_map.mod wobs J0555+3948_X_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J0555+3948_X_2006_02_16_yyk_uvs.fits wwins J0555+3948_X_2006_02_16_yyk\_map.win ! wwins: Wrote 1 windows to J0555+3948_X_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0128285 Jy ! Component: 100 - total flux cleaned = -0.0239932 Jy ! Component: 150 - total flux cleaned = -0.0316093 Jy ! Component: 200 - total flux cleaned = -0.0338074 Jy ! Component: 250 - total flux cleaned = -0.0351807 Jy ! Component: 300 - total flux cleaned = -0.0364733 Jy ! Component: 350 - total flux cleaned = -0.0386094 Jy ! Component: 400 - total flux cleaned = -0.0409384 Jy ! Component: 450 - total flux cleaned = -0.0428983 Jy ! Component: 500 - total flux cleaned = -0.0445065 Jy ! Component: 550 - total flux cleaned = -0.0460534 Jy ! Component: 600 - total flux cleaned = -0.0470545 Jy ! Component: 650 - total flux cleaned = -0.0485068 Jy ! Component: 700 - total flux cleaned = -0.0501387 Jy ! Component: 750 - total flux cleaned = -0.0514911 Jy ! Component: 800 - total flux cleaned = -0.0528056 Jy ! Component: 850 - total flux cleaned = -0.0534507 Jy ! Component: 900 - total flux cleaned = -0.0546955 Jy ! Component: 950 - total flux cleaned = -0.0552994 Jy ! Component: 1000 - total flux cleaned = -0.0558865 Jy ! Component: 1050 - total flux cleaned = -0.0564595 Jy ! Component: 1100 - total flux cleaned = -0.0566456 Jy ! Component: 1150 - total flux cleaned = -0.0564659 Jy ! Component: 1200 - total flux cleaned = -0.056642 Jy ! Component: 1250 - total flux cleaned = -0.0557869 Jy ! Component: 1300 - total flux cleaned = -0.0554585 Jy ! Component: 1350 - total flux cleaned = -0.0551332 Jy ! Component: 1400 - total flux cleaned = -0.0548113 Jy ! Component: 1450 - total flux cleaned = -0.0546559 Jy ! Component: 1500 - total flux cleaned = -0.0541964 Jy ! Component: 1550 - total flux cleaned = -0.0540511 Jy ! Component: 1600 - total flux cleaned = -0.0541973 Jy ! Component: 1650 - total flux cleaned = -0.0536189 Jy ! Component: 1700 - total flux cleaned = -0.0536187 Jy ! Component: 1750 - total flux cleaned = -0.0530668 Jy ! Component: 1800 - total flux cleaned = -0.0523905 Jy ! Component: 1850 - total flux cleaned = -0.0519935 Jy ! Component: 1900 - total flux cleaned = -0.0517319 Jy ! Component: 1950 - total flux cleaned = -0.0514752 Jy ! Component: 2000 - total flux cleaned = -0.0514721 Jy ! Total flux subtracted in 2048 components = -0.0513477 Jy ! Clean residual min=-0.006504 max=0.006440 Jy/beam ! Clean residual mean=0.000024 rms=0.002404 Jy/beam ! Combined flux in latest and established models = 3.79265 Jy keep ! Adding 139 model components to the UV plane model. ! The established model now contains 214 components and 3.79264 Jy ![Exited script file: muppet] wmap "J0555+3948_X_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9344 x 2.467 at -35.25 degrees (North through East) ! Clean map min=-0.015144 max=2.9217 Jy/beam ! Writing clean map to FITS file: J0555+3948_X_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.92171 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00238095 device "J0555+3948_X_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J0555+3948_X_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.244475 0.244475 0.48895 0.9779 1.9558 3.9116 7.8232 15.6464 31.2928 62.5856 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0071 print "peak=",int(peak_flux*1000)/1000 ! peak= 2.921 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9344 x 2.467 at -35.25 degrees (North through East) ! Clean map min=-0.015144 max=2.9217 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0555+3948_X_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J0555+3948_X_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0555+3948_X_2006_02_16_yyk_uvs.log closed on Wed Jul 5 11:31:45 2006