|
Chapter 27
(06/16/2008)CBPL methods do not include proprietary information such as ASTM Standards.
( Download All CBPL Methods
(zip - 6,405 KB.) )
Mineral fuels, mineral oils and products of their distillation; bituminous substances; mineral waxes27-01 Standard Test Method for API Gravity of crude Petroleum and Petroleum Products (Hydrometer Method) (ASTM D 287)27-02 Standard Practice for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Meter (ASTM D 1298)27-03 Standard Test Method for Water in Crude Oil by Distillation (ASTM D 4006)27-04 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation (ASTM D 95)27-05 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration (ASTM D 4928-89)27-06 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method (ASTM D 473)27-07 Standard Test Method for Sediment in Crude Oil by Membrane Filtration (ASTM D 4807)27-08 Standard Test Method for Distillation of Petroleum Products (ASTM D 86)27-09 Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxgenate Blends (Dry Method) (ASTM D 4953)27-10 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) (ASTM D 323)27-11 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Velocity) (ASTM D 445)27-12 Standard Test Method for Saybolt Viscosity (ASTM D 88)27-13 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-ray Fluorescence Spectrometry (ASTM D 4294)27-14 Standard Test Method for Sulfur in Petroleum Products (X-Ray Spectrographic Methods) (ASTM D 2622)27-15 Standard Practice for Sampling and Handling Liquid Cyclic Products (ASTM D 3437)27-16 Standard Practice for Sampling Industrial Chemicals (ASTM E 300)27-17 Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride (ASTM D 3438)27-18 Standard Practice for Sampling and Handling Phenol and Cresylic Acid (ASTM D 3852)27-19 Standard Test Methods for Assay of Alkaline Cresylate Solutions from Petroleum Sources (ASTM D 3439)27-20 Standard Practice for Manual Sampling of Petroleum and Petroleum Products (ASTM D 4057)27-21 Standard Practice for the Automatic Sampling of Petroleum and Petroleum Products (ASTM D 4177)27-22 Standard Specification for Fuel Oils (ASTM D 396)27-23 Standard Specification for Diesel Fuel Oils (ASTM D 975)27-24 Standard Specification for Marine Fuels (ASTM D 2069)27-25 Standard Specification for Gas Turbine Fuel Oils (ASTM D 2880)27-26 Standard Specification for Automotive Spark-Ignition Engine Fuel27-27 Standard Specification for Aviation Turbine Fuels (ASTM D 1655)27-28 Standard Specification for Aviation Gasolines (ASTM D 910)27-29 Standard Specification for Kerosine (ASTM D 3699)27-30 Standard Specification for Mineral Spirits (Petroleum Spirit) (Hydrocarbon Dry Cleaning Solvent) (ASTM D 235)27-31 Standard Specification for VM&P Naphthas (ASTM D 3735)27-32 Standard Test Method for Congealing Point of Petroleum Waxes Including Petrolatum (ASTM D 938)27-33 Standard Test Method for Penetration of Bituminous Materials (ASTM D 5)27-34 Standard Test Method for Cone Penetration of Lubricating Grease (ASTM D 217)27-35 Standard Test Method for Cone Penetration of Petrolatum (ASTM D 937)27-36 Standard Practice for Sampling Liquid Petroleum (LP) Gases (Manual Method) (ASTM D 1265)27-37 Standard Practice for Evaluation of Mass Spectrometers for Quantitative Analysis from a Batch Inlet (ASTM E 137)27-38 Standard Test Method for Chemical Composition of Gases by Mass Spectrometry (ASTM D 2650)27-39 Standard Test Method for Oil Content of Petroleum Waxes (ASTM D 721)27-40 Standard Practice for Sampling Bituminous Materials (ASTM D 140)27-41 Standard Specifications for Emulsified Asphalts (ASTM D 977)27-42 Standard Test Methods for Emulsified Asphalts (ASTM D 244)27-43 Standard Specifications for Cutback Asphalt (Slow Curing Type) (ASTM D 2026)27-44 Standard Specifications for Cutback Asphalt (Medium Curing Type) (ASTM D 2027)27-45 Standard Specifications for Cutback Asphalt (Rapid Curing Type) (ASTM D 2028)27-46 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer (ASTM D 5002)27-47 Guidelines for Country-of-Origin Determinations of Distillate Petroleum Products from Iraq27-48 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter (ASTM D 4052)27-49 Nuclear Magnetic Resonance (USP 761)27-50 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester (ASTM D 93)27-51 Standard Test Method for Paraffin-Type Hydrocarbons in Carnauba Wax27-52 Thermal Analysis (USP 891)27-53 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge (ASTM D 2709)27-54 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)27-55 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures (ASTM D 5142) |
|
| | |
|