! Started logfile: J0336+3218_S_2006_02_14_yyk_uvs.log on Wed Jul  5 11:12:30 2006
obs J0336+3218_S_2006_02_14_yyk_uva.fits
! Reading UV FITS file: J0336+3218_S_2006_02_14_yyk_uva.fits
! AN table 1: 226 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.786922 visibilities/baseline/integration-bin.
! Found source: J0336+3218
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2683 lines of history.
! 
! Reading 32012 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0336+3218_S_2006_02_14_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 1.76477 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.586 mas, bmaj=8.023 mas, bpa=-22.18 degrees
! Estimated noise=1.91297 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.5, 0.5).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.34986 Jy
! Component: 100  -  total flux cleaned = 1.87196 Jy
! Total flux subtracted in 100 components = 1.87196 Jy
! Clean residual min=-0.086916 max=0.254564 Jy/beam
! Clean residual mean=-0.000354 rms=0.035985 Jy/beam
! Combined flux in latest and established models = 1.87196 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 1.87196 Jy
! 
! Correcting IF 1.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.518422Jy  sigma=10.685272
! Fit after  self-cal, rms=0.515409Jy  sigma=10.607395
! Inverting map and beam 
! Estimated beam: bmin=2.586 mas, bmaj=8.023 mas, bpa=-22.18 degrees
! Estimated noise=1.91297 mJy/beam.
! Added new window around map position (5, -3.5).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.293977 Jy
! Component: 100  -  total flux cleaned = 0.448036 Jy
! Total flux subtracted in 100 components = 0.448036 Jy
! Clean residual min=-0.052004 max=0.072938 Jy/beam
! Clean residual mean=-0.000317 rms=0.018703 Jy/beam
! Combined flux in latest and established models = 2.31999 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 35 components and 2.31999 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.326378Jy  sigma=6.725662
! Fit after  self-cal, rms=0.324352Jy  sigma=6.687453
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.296 mas, bmaj=8.551 mas, bpa=-22.6 degrees
! Estimated noise=1.30091 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.180479 Jy
! Component: 100  -  total flux cleaned = 0.285937 Jy
! Component: 150  -  total flux cleaned = 0.350477 Jy
! Component: 200  -  total flux cleaned = 0.390679 Jy
! Total flux subtracted in 200 components = 0.390679 Jy
! Clean residual min=-0.050363 max=0.048657 Jy/beam
! Clean residual mean=-0.000879 rms=0.020001 Jy/beam
! Combined flux in latest and established models = 2.71067 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 50 model components to the UV plane model.
! The established model now contains 83 components and 2.71067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.272939Jy  sigma=5.119479
! Fit after  self-cal, rms=0.270586Jy  sigma=5.063224
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.296 x 8.551 at -22.6 degrees (North through East)
! Clean map  min=-0.049577  max=1.4463 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.0185
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.94     HN        0.95     KP        0.95     
!   LA        1.22     MK        0.89     NL        0.95     OV        1.00     
!   PT        1.06     SC        0.94     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.994934
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        0.98     KP        0.97     
!   LA        1.18     MK        1.00     NL        0.95     OV        1.03     
!   PT        1.02     SC        0.97     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.955477
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.24     FD        1.02     HN        1.01     KP        0.99     
!   LA        0.96     MK        1.07     NL        1.06     OV        1.07     
!   PT        1.10     SC        0.95     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1.05154
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.01     HN        0.91     KP        0.90     
!   LA        0.84     MK        1.05     NL        0.98     OV        0.88     
!   PT        0.98     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.270586Jy  sigma=5.063224
! Fit after  self-cal, rms=0.188792Jy  sigma=3.059926
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.188792Jy  sigma=3.059926
! Fit after  self-cal, rms=0.188768Jy  sigma=3.059709
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.299 mas, bmaj=8.575 mas, bpa=-22.61 degrees
! Estimated noise=1.30585 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0360904 Jy
! Component: 100  -  total flux cleaned = 0.0568434 Jy
! Component: 150  -  total flux cleaned = 0.069884 Jy
! Component: 200  -  total flux cleaned = 0.078164 Jy
! Total flux subtracted in 200 components = 0.078164 Jy
! Clean residual min=-0.025142 max=0.025688 Jy/beam
! Clean residual mean=-0.000106 rms=0.009446 Jy/beam
! Combined flux in latest and established models = 2.78883 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 104 components and 2.78883 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.186809Jy  sigma=2.937648
! Fit after  self-cal, rms=0.187007Jy  sigma=2.932811
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.187007Jy  sigma=2.932811
! Fit after  self-cal, rms=0.178628Jy  sigma=2.812055
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00830509 Jy
! Component: 100  -  total flux cleaned = 0.00948549 Jy
! Component: 150  -  total flux cleaned = 0.0100905 Jy
! Component: 200  -  total flux cleaned = 0.0106236 Jy
! Total flux subtracted in 200 components = 0.0106236 Jy
! Clean residual min=-0.023009 max=0.024761 Jy/beam
! Clean residual mean=-0.000098 rms=0.008746 Jy/beam
! Combined flux in latest and established models = 2.79946 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 116 components and 2.79946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.178357Jy  sigma=2.800541
! Fit after  self-cal, rms=0.176980Jy  sigma=2.791182
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.299 x 8.575 at -22.61 degrees (North through East)
! Clean map  min=-0.022362  max=1.4476 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.176980Jy  sigma=2.791182
! Fit after  self-cal, rms=0.127576Jy  sigma=1.380831
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.127576Jy  sigma=1.380831
! Fit after  self-cal, rms=0.126955Jy  sigma=1.375957
! Inverting map and beam 
! Estimated beam: bmin=3.302 mas, bmaj=8.588 mas, bpa=-22.67 degrees
! Estimated noise=1.30805 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.011139 Jy
! Component: 100  -  total flux cleaned = -0.0138694 Jy
! Component: 150  -  total flux cleaned = -0.0150903 Jy
! Component: 200  -  total flux cleaned = -0.0157444 Jy
! Total flux subtracted in 200 components = -0.0157444 Jy
! Clean residual min=-0.010983 max=0.013273 Jy/beam
! Clean residual mean=0.000025 rms=0.003628 Jy/beam
! Combined flux in latest and established models = 2.78371 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 129 components and 2.78371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.125753Jy  sigma=1.344722
! Fit after  self-cal, rms=0.125598Jy  sigma=1.341957
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.125598Jy  sigma=1.341957
! Fit after  self-cal, rms=0.124043Jy  sigma=1.268273
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124043Jy  sigma=1.268273
! Fit after  self-cal, rms=0.124073Jy  sigma=1.267378
! Inverting map and beam 
! Estimated beam: bmin=3.299 mas, bmaj=8.623 mas, bpa=-22.69 degrees
! Estimated noise=1.31004 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00553338 Jy
! Component: 100  -  total flux cleaned = -0.00666001 Jy
! Component: 150  -  total flux cleaned = -0.00774593 Jy
! Component: 200  -  total flux cleaned = -0.0086486 Jy
! Total flux subtracted in 200 components = -0.0086486 Jy
! Clean residual min=-0.009613 max=0.013767 Jy/beam
! Clean residual mean=0.000005 rms=0.003380 Jy/beam
! Combined flux in latest and established models = 2.77507 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 139 components and 2.77507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.123383Jy  sigma=1.252906
! Fit after  self-cal, rms=0.123484Jy  sigma=1.252239
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.439 mas, bmaj=10.56 mas, bpa=-2.754 degrees
! Estimated noise=1.64316 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00297485 Jy
! Component: 100  -  total flux cleaned = 0.00283051 Jy
! Component: 150  -  total flux cleaned = 0.00296847 Jy
! Component: 200  -  total flux cleaned = 0.00296858 Jy
! Total flux subtracted in 200 components = 0.00296858 Jy
! Clean residual min=-0.013668 max=0.017345 Jy/beam
! Clean residual mean=0.000028 rms=0.004674 Jy/beam
! Combined flux in latest and established models = 2.77803 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 145 components and 2.77803 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.123454Jy  sigma=1.256465
! Fit after  self-cal, rms=0.123585Jy  sigma=1.255447
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.584 mas, bmaj=8.016 mas, bpa=-22.16 degrees
! Estimated noise=1.90712 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.35233 Jy
! Component: 100  -  total flux cleaned = 1.89894 Jy
! Component: 150  -  total flux cleaned = 2.17041 Jy
! Component: 200  -  total flux cleaned = 2.31737 Jy
! Total flux subtracted in 200 components = 2.31737 Jy
! Clean residual min=-0.036348 max=0.058914 Jy/beam
! Clean residual mean=-0.000068 rms=0.014235 Jy/beam
! Combined flux in latest and established models = 2.31737 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 51 model components to the UV plane model.
! The established model now contains 51 components and 2.31737 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.299 mas, bmaj=8.623 mas, bpa=-22.69 degrees
! Estimated noise=1.31004 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.184057 Jy
! Component: 100  -  total flux cleaned = 0.289078 Jy
! Component: 150  -  total flux cleaned = 0.351465 Jy
! Component: 200  -  total flux cleaned = 0.389498 Jy
! Total flux subtracted in 200 components = 0.389498 Jy
! Clean residual min=-0.015983 max=0.023452 Jy/beam
! Clean residual mean=-0.000065 rms=0.007255 Jy/beam
! Combined flux in latest and established models = 2.70686 Jy
! Adding 67 model components to the UV plane model.
! The established model now contains 107 components and 2.70686 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.439 mas, bmaj=10.56 mas, bpa=-2.754 degrees
! Estimated noise=1.64316 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0404602 Jy
! Component: 100  -  total flux cleaned = 0.0572168 Jy
! Component: 150  -  total flux cleaned = 0.0635474 Jy
! Component: 200  -  total flux cleaned = 0.0641786 Jy
! Total flux subtracted in 200 components = 0.0641786 Jy
! Clean residual min=-0.013972 max=0.018227 Jy/beam
! Clean residual mean=0.000015 rms=0.005062 Jy/beam
! Combined flux in latest and established models = 2.77104 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 120 components and 2.77104 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.299 mas, bmaj=8.623 mas, bpa=-22.69 degrees
! Estimated noise=1.31004 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00990105 Jy
! Component: 100  -  total flux cleaned = -0.00992314 Jy
! Component: 150  -  total flux cleaned = -0.00919613 Jy
! Component: 200  -  total flux cleaned = -0.00825127 Jy
! Total flux subtracted in 200 components = -0.00825127 Jy
! Clean residual min=-0.012455 max=0.015787 Jy/beam
! Clean residual mean=-0.000014 rms=0.003847 Jy/beam
! Combined flux in latest and established models = 2.76279 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 140 components and 2.76279 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124207Jy  sigma=1.295870
! Fit after  self-cal, rms=0.123732Jy  sigma=1.273845
wmodel J0336+3218_S_2006_02_14_yyk\_map.mod
! Writing 140 model components to file: J0336+3218_S_2006_02_14_yyk_map.mod
wobs J0336+3218_S_2006_02_14_yyk\_uvs.fits
! Writing UV FITS file: J0336+3218_S_2006_02_14_yyk_uvs.fits
wwins J0336+3218_S_2006_02_14_yyk\_map.win
! wwins: Wrote 2 windows to J0336+3218_S_2006_02_14_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00594339 Jy
! Component: 100  -  total flux cleaned = 0.00896601 Jy
! Component: 150  -  total flux cleaned = 0.0122807 Jy
! Component: 200  -  total flux cleaned = 0.0140736 Jy
! Component: 250  -  total flux cleaned = 0.0152533 Jy
! Component: 300  -  total flux cleaned = 0.016047 Jy
! Component: 350  -  total flux cleaned = 0.0166552 Jy
! Component: 400  -  total flux cleaned = 0.0176615 Jy
! Component: 450  -  total flux cleaned = 0.0186196 Jy
! Component: 500  -  total flux cleaned = 0.0195371 Jy
! Component: 550  -  total flux cleaned = 0.0205459 Jy
! Component: 600  -  total flux cleaned = 0.0211527 Jy
! Component: 650  -  total flux cleaned = 0.0217381 Jy
! Component: 700  -  total flux cleaned = 0.0221856 Jy
! Component: 750  -  total flux cleaned = 0.0223998 Jy
! Component: 800  -  total flux cleaned = 0.0228187 Jy
! Component: 850  -  total flux cleaned = 0.022918 Jy
! Component: 900  -  total flux cleaned = 0.0232148 Jy
! Component: 950  -  total flux cleaned = 0.0234101 Jy
! Component: 1000  -  total flux cleaned = 0.023783 Jy
! Component: 1050  -  total flux cleaned = 0.0240538 Jy
! Component: 1100  -  total flux cleaned = 0.0243175 Jy
! Component: 1150  -  total flux cleaned = 0.024401 Jy
! Component: 1200  -  total flux cleaned = 0.0243993 Jy
! Component: 1250  -  total flux cleaned = 0.0244827 Jy
! Component: 1300  -  total flux cleaned = 0.0248036 Jy
! Component: 1350  -  total flux cleaned = 0.0251165 Jy
! Component: 1400  -  total flux cleaned = 0.0251165 Jy
! Component: 1450  -  total flux cleaned = 0.0252681 Jy
! Component: 1500  -  total flux cleaned = 0.0254157 Jy
! Component: 1550  -  total flux cleaned = 0.0253429 Jy
! Component: 1600  -  total flux cleaned = 0.0256987 Jy
! Component: 1650  -  total flux cleaned = 0.0255591 Jy
! Component: 1700  -  total flux cleaned = 0.0257664 Jy
! Component: 1750  -  total flux cleaned = 0.0259676 Jy
! Component: 1800  -  total flux cleaned = 0.0260324 Jy
! Component: 1850  -  total flux cleaned = 0.0257738 Jy
! Component: 1900  -  total flux cleaned = 0.0259652 Jy
! Component: 1950  -  total flux cleaned = 0.0257776 Jy
! Component: 2000  -  total flux cleaned = 0.0257151 Jy
! Total flux subtracted in 2048 components = 0.0253497 Jy
! Clean residual min=-0.003781 max=0.003873 Jy/beam
! Clean residual mean=-0.000073 rms=0.001270 Jy/beam
! Combined flux in latest and established models = 2.78814 Jy
keep
! Adding 146 model components to the UV plane model.
! The established model now contains 286 components and 2.78814 Jy
![Exited script file: muppet]
wmap "J0336+3218_S_2006_02_14_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.299 x 8.623 at -22.69 degrees (North through East)
! Clean map  min=-0.008807  max=1.4532 Jy/beam
! Writing clean map to FITS file: J0336+3218_S_2006_02_14_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.45324 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0012322 
device "J0336+3218_S_2006_02_14_yyk\_map.eps/VPS"
! Attempting to open device: 'J0336+3218_S_2006_02_14_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.254369 0.254369 0.508738 1.01748 2.03495 4.0699 8.13981 16.2796 32.5592 65.1185
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0036 
print "peak=",int(peak_flux*1000)/1000
! peak= 1.453 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.299 x 8.623 at -22.69 degrees (North through East)
! Clean map  min=-0.008807  max=1.4532 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0336+3218_S_2006_02_14_yyk\_map.gif/gif"
! Attempting to open device: 'J0336+3218_S_2006_02_14_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0336+3218_S_2006_02_14_yyk_uvs.log closed on Wed Jul  5 11:13:04 2006