perlfunc - Perl builtin functions
The functions in this section can serve as terms in an expression. They
fall into two major categories: list operators and named unary operators.
These differ in their precedence relationship with a following comma. (See
the precedence table in the perlop manpage.) List operators take more than one argument, while unary operators can
never take more than one argument. Thus, a comma terminates the argument of
a unary operator, but merely separates the arguments of a list operator. A
unary operator generally provides a scalar context to its argument, while a
list operator may provide either scalar or list contexts for its arguments.
If it does both, the scalar arguments will be first, and the list argument
will follow. (Note that there can ever be only one such list argument.) For
instance, splice()
has three scalar arguments followed by a
list, whereas gethostbyname()
has four scalar arguments.
In the syntax descriptions that follow, list operators that expect a list (and provide list context for the elements of the list) are shown with LIST as an argument. Such a list may consist of any combination of scalar arguments or list values; the list values will be included in the list as if each individual element were interpolated at that point in the list, forming a longer single-dimensional list value. Elements of the LIST should be separated by commas.
Any function in the list below may be used either with or without parentheses around its arguments. (The syntax descriptions omit the parentheses.) If you use the parentheses, the simple (but occasionally surprising) rule is this: It LOOKS like a function, therefore it IS a function, and precedence doesn't matter. Otherwise it's a list operator or unary operator, and precedence does matter. And whitespace between the function and left parenthesis doesn't count--so you need to be careful sometimes:
print 1+2+4; # Prints 7. print(1+2) + 4; # Prints 3. print (1+2)+4; # Also prints 3! print +(1+2)+4; # Prints 7. print ((1+2)+4); # Prints 7.
If you run Perl with the -w switch it can warn you about this. For example, the third line above produces:
print (...) interpreted as function at - line 1. Useless use of integer addition in void context at - line 1.
A few functions take no arguments at all, and therefore work as neither
unary nor list operators. These include such functions as time
and endpwent. For example, time+86_400
always means
time() + 86_400
.
For functions that can be used in either a scalar or list context, nonabortive failure is generally indicated in a scalar context by returning the undefined value, and in a list context by returning the null list.
Remember the following important rule: There is no rule that relates the behavior of an expression in list context to its behavior in scalar context, or vice versa. It might do two totally different things. Each operator and function decides which sort of value it would be most appropriate to return in scalar context. Some operators return the length of the list that would have been returned in list context. Some operators return the first value in the list. Some operators return the last value in the list. Some operators return a count of successful operations. In general, they do what you want, unless you want consistency.
An named array in scalar context is quite different from what would at
first glance appear to be a list in scalar context. You can't get a list
like (1,2,3)
into being in scalar context, because the compiler knows the context at
compile time. It would generate the scalar comma operator there, not the
list construction version of the comma. That means it was never a list to
start with.
In general, functions in Perl that serve as wrappers for system calls of
the same name (like chown(2),
fork(2),
closedir(2),
etc.) all return true when they succeed and undef otherwise, as is usually mentioned in the descriptions below. This is
different from the C interfaces, which return -1
on failure. Exceptions to this rule are wait(),
waitpid(), and syscall(). System calls also set the special $!
variable on failure. Other functions do not, except accidentally.
Here are Perl's functions (including things that look like functions, like some keywords and named operators) arranged by category. Some functions appear in more than one place.
chomp, chop, chr, crypt, hex, index, lc, lcfirst,
length, oct, ord, pack, q/STRING/
, qq/STRING/
, reverse,
rindex, sprintf, substr, tr///, uc, ucfirst, y///
abs, atan2, cos, exp, hex, int, log, oct, rand, sin, sqrt, srand
binmode, close, closedir, dbmclose, dbmopen, die, eof, fileno, flock, format, getc, print, printf, read, readdir, rewinddir, seek, seekdir, select, syscall, sysread, sysseek, syswrite, tell, telldir, truncate, warn, write
-<EM>X</EM>
, chdir, chmod, chown, chroot, fcntl, glob,
ioctl, link, lstat, mkdir, open, opendir,
readlink, rename, rmdir, stat, symlink, umask,
unlink, utime
caller, continue, die, do, dump, eval, exit, goto, last, next, redo, return, sub, wantarray
defined, dump, eval, formline, local, my, reset, scalar, undef, wantarray
alarm, exec, fork, getpgrp, getppid, getpriority, kill,
pipe, qx/STRING/
, setpgrp, setpriority, sleep, system,
times, wait, waitpid
bless, dbmclose, dbmopen, package, ref, tie, tied, untie, use
accept, bind, connect, getpeername, getsockname, getsockopt, listen, recv, send, setsockopt, shutdown, socket, socketpair
msgctl, msgget, msgrcv, msgsnd, semctl, semget, semop, shmctl, shmget, shmread, shmwrite
endgrent, endhostent, endnetent, endpwent, getgrent, getgrgid, getgrnam, getlogin, getpwent, getpwnam, getpwuid, setgrent, setpwent
endprotoent, endservent, gethostbyaddr, gethostbyname, gethostent, getnetbyaddr, getnetbyname, getnetent, getprotobyname, getprotobynumber, getprotoent, getservbyname, getservbyport, getservent, sethostent, setnetent, setprotoent, setservent
abs, bless, chomp, chr, exists, formline, glob, import, lc, lcfirst, map, my, no, prototype, qx, qw, readline, readpipe, ref, sub*, sysopen, tie, tied, uc, ucfirst, untie, use
* - sub was a keyword in perl4, but in perl5 it is an operator, which can be used in expressions.
Perl was born in Unix and can therefore access all common Unix system calls. In non-Unix environments, the functionality of some Unix system calls may not be available, or details of the available functionality may differ slightly. The Perl functions affected by this are:
-X
, binmode, chmod, chown, chroot, crypt,
dbmclose, dbmopen, dump, endgrent, endhostent,
endnetent, endprotoent, endpwent, endservent, exec,
fcntl, flock, fork, getgrent, getgrgid, gethostent,
getlogin, getnetbyaddr, getnetbyname, getnetent,
getppid, getprgp
, getpriority, getprotobynumber,
getprotoent, getpwent, getpwnam, getpwuid,
getservbyport, getservent, getsockopt, glob, ioctl,
kill, link, lstat, msgctl, msgget, msgrcv,
msgsnd, open, pipe, readlink, rename, select, semctl,
semget, semop, setgrent, sethostent, setnetent,
setpgrp, setpriority, setprotoent, setpwent,
setservent, setsockopt, shmctl, shmget, shmread,
shmwrite, socket, socketpair, stat, symlink, syscall,
sysopen, system, times, truncate, umask, unlink,
utime, wait, waitpid
For more information about the portability of these functions, see the perlport manpage and other available platform-specific documentation.
A file test, where X is one of the letters listed below. This unary
operator takes one argument, either a filename or a filehandle, and tests
the associated file to see if something is true about it. If the argument
is omitted, tests $_
, except for -t
, which tests STDIN. Unless otherwise documented, it returns 1
for TRUE and ''
for FALSE, or the undefined value if the file doesn't exist. Despite the
funny names, precedence is the same as any other named unary operator, and
the argument may be parenthesized like any other unary operator. The
operator may be any of:
X<-r>X<-w>X<-x>X<-o>X<-R>X<-W>X<-X>X<-O>X<-e>X<-z>X<-s>X<-f>X<-d>X<-l>X<-p>
X<-S>X<-b>X<-c>X<-t>X<-u>X<-g>X<-k>X<-T>X<-B>X<-M>X<-A>X<-C>
-r File is readable by effective uid/gid. -w File is writable by effective uid/gid. -x File is executable by effective uid/gid. -o File is owned by effective uid.
-R File is readable by real uid/gid. -W File is writable by real uid/gid. -X File is executable by real uid/gid. -O File is owned by real uid.
-e File exists. -z File has zero size. -s File has nonzero size (returns size).
-f File is a plain file. -d File is a directory. -l File is a symbolic link. -p File is a named pipe (FIFO), or Filehandle is a pipe. -S File is a socket. -b File is a block special file. -c File is a character special file. -t Filehandle is opened to a tty.
-u File has setuid bit set. -g File has setgid bit set. -k File has sticky bit set.
-T File is a text file. -B File is a binary file (opposite of -T).
-M Age of file in days when script started. -A Same for access time. -C Same for inode change time.
Example:
while (<>) { chop; next unless -f $_; # ignore specials #... }
The interpretation of the file permission operators -r
, -R
,
-w
, -W
, -x
, and -X
is by default based solely on the mode of the file and the uids and gids of
the user. There may be other reasons you can't actually read, write, or
execute the file. Such reasons may be for example network filesystem access
controls, ACLs (access control lists), read-only filesystems, and
unrecognized executable formats.
Also note that, for the superuser on the local filesystems, the -r
,
-R
, -w
, and -W
tests always return 1, and -x
and -X
return 1 if any execute bit is set in the mode. Scripts run by the
superuser may thus need to do a stat()
to determine the actual
mode of the file, or temporarily set their effective uid to something else.
Note that -s/a/b/
does not do a negated substitution. Saying
-exp($foo) still works as expected, however--only single letters following a minus are
interpreted as file tests.
The -T
and -B
switches work as follows. The first block or so of the file is examined for
odd characters such as strange control codes or characters with the high
bit set. If too many strange characters (>30%) are found, it's a -B
file, otherwise it's a -T
file. Also, any file containing null in the first block is considered a
binary file. If -T
or -B
is used on a filehandle, the current stdio buffer is examined rather than
the first block. Both -T
and -B
return TRUE on a null file, or a file at EOF when testing a filehandle.
Because you have to read a file to do the -T
test, on most occasions you want to use a -f
against the file first, as in next unless -f $file && -T $file
.
If any of the file tests (or either the stat() or lstat() operators) are given the special filehandle consisting of a solitary
underline, then the stat structure of the previous file test (or stat
operator) is used, saving a system call. (This doesn't work with -t
, and you need to remember that lstat()
and -l
will leave values in the stat structure for the symbolic link, not the real
file.) Example:
print "Can do.\n" if -r $a || -w _ || -x _;
stat($filename); print "Readable\n" if -r _; print "Writable\n" if -w _; print "Executable\n" if -x _; print "Setuid\n" if -u _; print "Setgid\n" if -g _; print "Sticky\n" if -k _; print "Text\n" if -T _; print "Binary\n" if -B _;
Returns the absolute value of its argument. If VALUE is omitted, uses $_
.
Accepts an incoming socket connect, just as the accept(2)
system call does. Returns the packed address if it succeeded, FALSE
otherwise. See the example in Sockets: Client/Server Communication.
Arranges to have a SIGALRM delivered to this process after the specified
number of seconds have elapsed. If SECONDS is not specified, the value
stored in $_
is used. (On some machines, unfortunately, the elapsed time may be up to
one second less than you specified because of how seconds are counted.)
Only one timer may be counting at once. Each call disables the previous
timer, and an argument of 0
may be supplied to cancel the previous timer without starting a new one.
The returned value is the amount of time remaining on the previous timer.
For delays of finer granularity than one second, you may use Perl's
four-arugment version of select()
leaving the first three
arguments undefined, or you might be able to use the syscall() interface to access setitimer(2)
if your system supports it.
The Time::HiRes module from CPAN may also prove useful.
It is usually a mistake to intermix alarm() and sleep() calls.
If you want to use alarm() to time out a system call you need to use an
eval()/die() pair. You can't rely on the alarm causing the system call to fail with $!
set to EINTR
because Perl sets up signal handlers to restart system calls on some
systems. Using eval()/die() always works, modulo the caveats given in Signals.
eval { local $SIG{ALRM} = sub { die "alarm\n" }; # NB: \n required alarm $timeout; $nread = sysread SOCKET, $buffer, $size; alarm 0; }; if ($@) { die unless $@ eq "alarm\n"; # propagate unexpected errors # timed out } else { # didn't }
Returns the arctangent of Y/X in the range -PI to PI.
For the tangent operation, you may use the POSIX::tan()
function, or use the familiar relation:
sub tan { sin($_[0]) / cos($_[0]) }
Binds a network address to a socket, just as the bind system call does. Returns TRUE if it succeeded, FALSE otherwise. NAME should be a packed address of the appropriate type for the socket. See the examples in Sockets: Client/Server Communication.
Arranges for the file to be read or written in ``binary'' mode in operating
systems that distinguish between binary and text files. Files that are not
in binary mode have CR LF sequences translated to LF on input and LF
translated to CR LF on output. Binmode has no effect under many sytems, but
in MS-DOS and similarly archaic systems, it may be imperative--otherwise
your MS-DOS-damaged C library may mangle your file. The key distinction
between systems that need binmode() and those that don't is their text file formats. Systems like Unix, MacOS,
and Plan9 that delimit lines with a single character, and that encode that
character in C as "\n"
, do not need binmode(). The rest may need it. If FILEHANDLE is an expression, the value is taken
as the name of the filehandle.
If the system does care about it, using it when you shouldn't is just as
perilous as failing to use it when you should. Fortunately for most of us,
you can't go wrong using binmode()
on systems that don't care
about it, though.
This function tells the thingy referenced by REF that it is now an object in the CLASSNAME package. If CLASSNAME is omitted, the current package is used. Because a bless() is often the last thing in a constructor. it returns the reference for convenience. Always use the two-argument version if the function doing the blessing might be inherited by a derived class. See the perltoot manpage and the perlobj manpage for more about the blessing (and blessings) of objects.
Consider always blessing objects in CLASSNAMEs that are mixed case. Namespaces with all lowercase names are considered reserved for Perl pragmata. Builtin types have all uppercase names, so to prevent confusion, you may wish to avoid such package names as well. Make sure that CLASSNAME is a true value.
See Perl Modules.
Returns the context of the current subroutine call. In scalar context, returns the caller's package name if there is a caller, that is, if we're in a subroutine or eval() or require(), and the undefined value otherwise. In list context, returns
($package, $filename, $line) = caller;
With EXPR, it returns some extra information that the debugger uses to print a stack trace. The value of EXPR indicates how many call frames to go back before the current one.
($package, $filename, $line, $subroutine, $hasargs, $wantarray, $evaltext, $is_require) = caller($i);
Here $subroutine
may be "(eval)"
if the frame is not a subroutine call, but an eval(). In such a case additional elements $evaltext
and
$is_require
are set: $is_require
is true if the frame is created by a
require or use statement, $evaltext
contains the text of the
eval EXPR
statement. In particular, for a eval BLOCK
statement,
$filename
is "(eval)"
, but $evaltext
is undefined. (Note also that each use statement creates a require frame inside an eval EXPR
) frame.
Furthermore, when called from within the DB package, caller returns more
detailed information: it sets the list variable @DB::args
to be the arguments with which the subroutine was invoked.
Be aware that the optimizer might have optimized call frames away before
caller() had a chance to get the information. That means that caller(N)
might not return information about the call frame you expect it do, for
N > 1
. In particular, @DB::args
might have information from the previous time caller() was called.
Changes the working directory to EXPR, if possible. If EXPR is omitted, changes to the user's home directory. Returns TRUE upon success, FALSE otherwise. See the example under die().
Changes the permissions of a list of files. The first element of the list
must be the numerical mode, which should probably be an octal number, and
which definitely should not a string of octal digits:
0644
is okay, '0644'
is not. Returns the number of files successfully changed. See also oct, if all you have is a string.
$cnt = chmod 0755, 'foo', 'bar'; chmod 0755, @executables; $mode = '0644'; chmod $mode, 'foo'; # !!! sets mode to # --w----r-T $mode = '0644'; chmod oct($mode), 'foo'; # this is better $mode = 0644; chmod $mode, 'foo'; # this is best
This safer version of chop removes any trailing string that corresponds to the current value of $/
(also known as $INPUT_RECORD_SEPARATOR
in the English
module). It returns the total number of characters removed from all its
arguments. It's often used to remove the newline from the end of an input
record when you're worried that the final record may be missing its
newline. When in paragraph mode ($/ = ""
), it removes all trailing newlines from the string. If VARIABLE is
omitted, it chomps $_
. Example:
while (<>) { chomp; # avoid \n on last field @array = split(/:/); # ... }
You can actually chomp anything that's an lvalue, including an assignment:
chomp($cwd = `pwd`); chomp($answer = <STDIN>);
If you chomp a list, each element is chomped, and the total number of characters removed is returned.
Chops off the last character of a string and returns the character chopped.
It's used primarily to remove the newline from the end of an input record,
but is much more efficient than s/\n//
because it neither scans nor copies the string. If VARIABLE is omitted,
chops $_
. Example:
while (<>) { chop; # avoid \n on last field @array = split(/:/); #... }
You can actually chop anything that's an lvalue, including an assignment:
chop($cwd = `pwd`); chop($answer = <STDIN>);
If you chop a list, each element is chopped. Only the value of the last chop() is returned.
Note that chop() returns the last character. To return all but the last character, use substr($string, 0, -1).
Changes the owner (and group) of a list of files. The first two elements of the list must be the NUMERICAL uid and gid, in that order. Returns the number of files successfully changed.
$cnt = chown $uid, $gid, 'foo', 'bar'; chown $uid, $gid, @filenames;
Here's an example that looks up nonnumeric uids in the passwd file:
print "User: "; chop($user = <STDIN>); print "Files: "; chop($pattern = <STDIN>);
($login,$pass,$uid,$gid) = getpwnam($user) or die "$user not in passwd file";
@ary = glob($pattern); # expand filenames chown $uid, $gid, @ary;
On most systems, you are not allowed to change the ownership of the file unless you're the superuser, although you should be able to change the group to any of your secondary groups. On insecure systems, these restrictions may be relaxed, but this is not a portable assumption.
Returns the character represented by that NUMBER in the character set. For
example, chr(65) is "A"
in ASCII. For the reverse, use ord.
If NUMBER is omitted, uses $_
.
This function works like the system call by the same name: it makes the
named directory the new root directory for all further pathnames that begin
with a "/"
by your process and all its children. (It doesn't change your current
working directory, which is unaffected.) For security reasons, this call is
restricted to the superuser. If FILENAME is omitted, does a chroot() to $_
.
Closes the file or pipe associated with the file handle, returning TRUE only if stdio successfully flushes buffers and closes the system file descriptor. Closes the currently selected filehandle if the argument is omitted.
You don't have to close FILEHANDLE if you are immediately going to do
another open() on it, because open() will close it for you. (See
open().) However, an explicit close() on an input file resets the line counter ($.
), while the implicit close done by open() does not.
If the file handle came from a piped open close() will additionally return FALSE if one of the other system calls involved
fails or if the program exits with non-zero status. (If the only problem
was that the program exited non-zero $!
will be set to 0
.) Closing a pipe also waits for the process executing on the pipe to
complete, in case you want to look at the output of the pipe afterwards,
and implicitly puts the exit status value of that command into $?
.
Example:
open(OUTPUT, '|sort >foo') # pipe to sort or die "Can't start sort: $!"; #... # print stuff to output close OUTPUT # wait for sort to finish or warn $! ? "Error closing sort pipe: $!" : "Exit status $? from sort"; open(INPUT, 'foo') # get sort's results or die "Can't open 'foo' for input: $!";
FILEHANDLE may be an expression whose value can be used as an indirect filehandle, usually the real filehandle name.
Closes a directory opened by opendir() and returns the success of that system call.
DIRHANDLE may be an expression whose value can be used as an indirect dirhandle, usually the real dirhandle name.
Attempts to connect to a remote socket, just as the connect system call does. Returns TRUE if it succeeded, FALSE otherwise. NAME should be a packed address of the appropriate type for the socket. See the examples in Sockets: Client/Server Communication.
Actually a flow control statement rather than a function. If there is a
continue BLOCK attached to a BLOCK (typically in a while
or
foreach
), it is always executed just before the conditional is about to be
evaluated again, just like the third part of a for
loop in C. Thus it can be used to increment a loop variable, even when the
loop has been continued via the next statement (which is similar to the C continue
statement).
last, next, or redo may appear within a continue block. last and redo will behave as if they had been executed within the main block. So will next, but since it will execute a continue block, it may be more entertaining.
while (EXPR) { ### redo always comes here do_something; } continue { ### next always comes here do_something_else; # then back the top to re-check EXPR } ### last always comes here
Omitting the continue section is semantically equivalent to using an empty one, logically enough. In that case, next goes directly back to check the condition at the top of the loop.
Returns the cosine of EXPR (expressed in radians). If EXPR is omitted,
takes cosine of $_
.
For the inverse cosine operation, you may use the POSIX::acos()
function, or use this relation:
sub acos { atan2( sqrt(1 - $_[0] * $_[0]), $_[0] ) }
Encrypts a string exactly like the crypt(3)
function in the C
library (assuming that you actually have a version there that has not been
extirpated as a potential munition). This can prove useful for checking the
password file for lousy passwords, amongst other things. Only the guys
wearing white hats should do this.
Note that crypt() is intended to be a one-way function, much like breaking eggs to make an omelette. There is no (known) corresponding decrypt function. As a result, this function isn't all that useful for cryptography. (For that, see your nearby CPAN mirror.)
When verifying an existing encrypted string you should use the encrypted
text as the salt (like crypt($plain, $crypted) eq $crypted
). This allows your code to work with the standard crypt() and with more exotic implementations. When choosing a new salt create a
random two character string whose characters come from the set [./0-9A-Za-z]
(like join '', ('.', '/', 0..9, 'A'..'Z', 'a'..'z')[rand 64, rand 64]
).
Here's an example that makes sure that whoever runs this program knows their own password:
$pwd = (getpwuid($<))[1];
system "stty -echo"; print "Password: "; chomp($word = <STDIN>); print "\n"; system "stty echo";
if (crypt($word, $pwd) ne $pwd) { die "Sorry...\n"; } else { print "ok\n"; }
Of course, typing in your own password to whoever asks you for it is unwise.
[This function has been largely superseded by the untie() function.]
Breaks the binding between a DBM file and a hash.
[This function has been largely superseded by the tie() function.]
This binds a dbm(3),
ndbm(3),
sdbm(3),
gdbm(3),
or Berkeley DB file to a hash.
HASH is the name of the hash. (Unlike normal open(), the first argument is NOT a filehandle, even though it looks like one). DBNAME is the name of the
database (without the .dir or .pag extension if any). If the database does not exist, it is created with
protection specified by MODE (as modified by the umask()). If your system supports only the older DBM functions, you may perform
only one dbmopen() in your program. In older versions of Perl, if your system had neither DBM
nor ndbm, calling dbmopen() produced a fatal error; it now falls back to sdbm(3).
If you don't have write access to the DBM file, you can only read hash variables, not set them. If you want to test whether you can write, either use file tests or try setting a dummy hash entry inside an eval(), which will trap the error.
Note that functions such as keys() and values() may return huge lists when used on large DBM files. You may prefer to use the each() function to iterate over large DBM files. Example:
# print out history file offsets dbmopen(%HIST,'/usr/lib/news/history',0666); while (($key,$val) = each %HIST) { print $key, ' = ', unpack('L',$val), "\n"; } dbmclose(%HIST);
See also the AnyDBM_File manpage for a more general description of the pros and cons of the various dbm approaches, as well as the DB_File manpage for a particularly rich implementation.
You can control which DBM library you use by loading that library before
you call dbmopen():
use DB_File; dbmopen(%NS_Hist, "$ENV{HOME}/.netscape/history.db") or die "Can't open netscape history file: $!";
Returns a Boolean value telling whether EXPR has a value other than the
undefined value undef. If EXPR is not present, $_
will be checked.
Many operations return undef to indicate failure, end of file, system error, uninitialized variable, and
other exceptional conditions. This function allows you to distinguish undef from other values. (A simple Boolean test will not distinguish among
undef, zero, the empty string, and "0"
, which are all equally false.) Note that since undef is a valid scalar, its presence doesn't necessarily indicate an exceptional condition: pop()
returns undef when its argument is an empty array, or when the element to return happens to be undef.
You may also use defined() to check whether a subroutine exists, by saying defined &func
without parentheses. On the other hand, use of defined() upon aggregates (hashes and arrays) is not guaranteed to produce intuitive
results, and should probably be avoided.
When used on a hash element, it tells you whether the value is defined, not whether the key exists in the hash. Use exists for the latter purpose.
Examples:
print if defined $switch{'D'}; print "$val\n" while defined($val = pop(@ary)); die "Can't readlink $sym: $!" unless defined($value = readlink $sym); sub foo { defined &$bar ? &$bar(@_) : die "No bar"; } $debugging = 0 unless defined $debugging;
Note: Many folks tend to overuse defined(), and then are surprised to discover that the number 0
and ""
(the zero-length string) are, in fact, defined values. For example, if you
say
"ab" =~ /a(.*)b/;
The pattern match succeeds, and $1
is defined, despite the fact that it matched ``nothing''. But it didn't
really match nothing--rather, it matched something that happened to be zero
characters long. This is all very above-board and honest. When a function
returns an undefined value, it's an admission that it couldn't give you an
honest answer. So you should use defined() only when you're questioning the integrity of what you're trying to do. At
other times, a simple comparison to 0
or ""
is what you want.
Currently, using defined() on an entire array or hash reports whether memory for that aggregate has ever been allocated. So an array you set to the empty list appears undefined initially, and one that once was full and that you then set to the empty list still appears defined. You should instead use a simple test for size:
if (@an_array) { print "has array elements\n" } if (%a_hash) { print "has hash members\n" }
Using undef() on these, however, does clear their memory and then report them as not defined anymore, but you shouldn't do that unless you don't plan to use them again, because it saves time when you load them up again to have memory already ready to be filled. The normal way to free up space used by an aggregate is to assign the empty list.
This counterintuitive behavior of defined() on aggregates may be changed, fixed, or broken in a future release of Perl.
Deletes the specified key(s)
and their associated values from
a hash. For each key, returns the deleted value associated with that key,
or the undefined value if there was no such key. Deleting from $ENV{}
modifies the environment. Deleting from a hash tied to a DBM file deletes
the entry from the DBM file. (But deleting from a tie()d hash doesn't necessarily return anything.)
The following deletes all the values of a hash:
foreach $key (keys %HASH) { delete $HASH{$key}; }
And so does this:
delete @HASH{keys %HASH}
But both of these are slower than just assigning the empty list or undefining it:
%hash = (); # completely empty %hash undef %hash; # forget %hash every existed
Note that the EXPR can be arbitrarily complicated as long as the final operation is a hash element lookup or hash slice:
delete $ref->[$x][$y]{$key}; delete @{$ref->[$x][$y]}{$key1, $key2, @morekeys};
Outside an eval(), prints the value of LIST to STDERR
and exits with the current value of $!
(errno). If $!
is 0
, exits with the value of
($? >> 8)
(backtick `command` status). If ($? >> 8)
is 0
, exits with 255
. Inside an eval(), the error message is stuffed into
$@
and the eval() is terminated with the undefined value. This makes
die() the way to raise an exception.
Equivalent examples:
die "Can't cd to spool: $!\n" unless chdir '/usr/spool/news'; chdir '/usr/spool/news' or die "Can't cd to spool: $!\n"
If the value of EXPR does not end in a newline, the current script line
number and input line number (if any) are also printed, and a newline is
supplied. Note that the ``input line number'' (also known as ``chunk'') is
subject to whatever notion of ``line'' happens to be currently in effect,
and is also available as the special variable $.
. See $/ and $..
Hint: sometimes appending ", stopped"
to your message will cause it to make better sense when the string "at foo line 123"
is appended. Suppose you are running script ``canasta''.
die "/etc/games is no good"; die "/etc/games is no good, stopped";
produce, respectively
/etc/games is no good at canasta line 123. /etc/games is no good, stopped at canasta line 123.
See also exit(),
warn(),
and the Carp module.
If LIST is empty and $@
already contains a value (typically from a previous eval) that value is
reused after appending "\t...propagated"
. This is useful for propagating exceptions:
eval { ... }; die unless $@ =~ /Expected exception/;
If $@
is empty then the string "Died"
is used.
die()
can also be called with a reference argument. If this
happens to be trapped within an eval(),
$@ contains the
reference. This behavior permits a more elaborate exception handling
implementation using objects that maintain arbitary state about the nature
of the exception. Such a scheme is sometimes preferable to matching
particular string values of $@ using regular expressions. Here's an
example:
eval { ... ; die Some::Module::Exception->new( FOO => "bar" ) }; if ($@) { if (ref($@) && UNIVERSAL::isa($@,"Some::Module::Exception")) { # handle Some::Module::Exception } else { # handle all other possible exceptions } }
Since perl will stringify uncaught exception messages before displaying them, you may want to overload stringification operations on such custom exception objects. See the overload manpage for details about that.
You can arrange for a callback to be run just before the die() does its deed, by setting the $SIG{__DIE__}
hook. The associated handler will be called with the error text and can
change the error message, if it sees fit, by calling die() again. See $SIG{expr} for details on setting %SIG
entries, and eval BLOCK for some examples.
Note that the $SIG{__DIE__}
hook is currently called even inside eval()ed
blocks/strings!
If one wants the hook to do nothing in such situations, put
die @_ if $^S;
as the first line of the handler (see $^S). Because this promotes action at a distance, this counterintuitive behavior may be fixed in a future release.
Not really a function. Returns the value of the last command in the sequence of commands indicated by BLOCK. When modified by a loop modifier, executes the BLOCK once before testing the loop condition. (On other statements the loop modifiers test the conditional first.)
do BLOCK
does not count as a loop, so the loop control statements
next, last, or redo cannot be used to leave or restart the block. See the perlsyn manpage for alternative strategies.
A deprecated form of subroutine call. See the perlsub manpage.
Uses the value of EXPR as a filename and executes the contents of the file as a Perl script. Its primary use is to include subroutines from a Perl subroutine library.
do 'stat.pl';
is just like
scalar eval `cat stat.pl`;
except that it's more efficient and concise, keeps track of the current
filename for error messages, searches the @INC
libraries, and
updates
%INC
if the file is found. See Predefined Names for these variables. It also differs in that code evaluated with do FILENAME
cannot see lexicals in the enclosing scope; eval STRING
does. It's the same, however, in that it does reparse the file every time
you call it, so you probably don't want to do this inside a loop.
If do cannot read the file, it returns undef and sets $!
to the error. If do can read the file but cannot compile it, it returns undef and sets an error
message in $@
. If the file is successfully compiled, do returns the value of the last expression evaluated.
Note that inclusion of library modules is better done with the use() and require() operators, which also do automatic error checking and raise an exception if there's a problem.
You might like to use do to read in a program configuration file. Manual error checking can be done this way:
# read in config files: system first, then user for $file ("/share/prog/defaults.rc", "$ENV{HOME}/.someprogrc") { unless ($return = do $file) { warn "couldn't parse $file: $@" if $@; warn "couldn't do $file: $!" unless defined $return; warn "couldn't run $file" unless $return; } }
This causes an immediate core dump. Primarily this is so that you can use
the undump program to turn your core dump into an executable binary after having
initialized all your variables at the beginning of the program. When the
new binary is executed it will begin by executing a
goto LABEL
(with all the restrictions that goto suffers). Think of it as a goto with an intervening core dump and
reincarnation. If LABEL
is omitted, restarts the program from the top. WARNING: Any files opened at
the time of the dump will NOT be open any more when the program is
reincarnated, with possible resulting confusion on the part of Perl. See
also -u option in the perlrun manpage.
Example:
#!/usr/bin/perl require 'getopt.pl'; require 'stat.pl'; %days = ( 'Sun' => 1, 'Mon' => 2, 'Tue' => 3, 'Wed' => 4, 'Thu' => 5, 'Fri' => 6, 'Sat' => 7, );
dump QUICKSTART if $ARGV[0] eq '-d';
QUICKSTART: Getopt('f');
This operator is largely obsolete, partly because it's very hard to convert a core file into an executable, and because the real perl-to-C compiler has superseded it.
When called in list context, returns a 2-element list consisting of the key
and value for the next element of a hash, so that you can iterate over it.
When called in scalar context, returns the key for only the ``next''
element in the hash. (Note: Keys may be "0"
or ""
, which are logically false; you may wish to avoid constructs like while ($k = each %foo) {}
for this reason.)
Entries are returned in an apparently random order. The actual random order is subject to change in future versions of perl, but it is guaranteed to be in the same order as either the keys() or values() function would produce on the same (unmodified) hash.
When the hash is entirely read, a null array is returned in list context
(which when assigned produces a FALSE (0
) value), and undef in scalar context. The next call to each() after that will start iterating again. There is a single iterator for each
hash, shared by all each(),
keys(), and values() function calls in the program; it can be reset by reading all the elements
from the hash, or by evaluating keys HASH
or
values HASH
. If you add or delete elements of a hash while you're iterating over it,
you may get entries skipped or duplicated, so don't.
The following prints out your environment like the printenv(1)
program, only in a different order:
while (($key,$value) = each %ENV) { print "$key=$value\n"; }
Returns 1 if the next read on FILEHANDLE will return end of file, or if
FILEHANDLE is not open. FILEHANDLE may be an expression whose value gives
the real filehandle. (Note that this function actually reads a character
and then ungetc()
s it, so isn't very useful in an interactive context.) Do not read from a
terminal file (or call
eof(FILEHANDLE) on it) after end-of-file is reached. Filetypes such as terminals may lose
the end-of-file condition if you do.
An eof without an argument uses the last file read as argument. Using eof() with empty parentheses is very different. It indicates the pseudo file
formed of the files listed on the command line, i.e.,
eof() is reasonable to use inside a while (<>)
loop to detect the end of only the last file. Use eof(ARGV) or eof without the parentheses to test EACH file in a while (<>) loop. Examples:
# reset line numbering on each input file while (<>) { next if /^\s*#/; # skip comments print "$.\t$_"; } continue { close ARGV if eof; # Not eof()! }
# insert dashes just before last line of last file while (<>) { if (eof()) { # check for end of current file print "--------------\n"; close(ARGV); # close or last; is needed if we # are reading from the terminal } print; }
Practical hint: you almost never need to use eof in Perl, because the input operators return false values when they run out of data, or if there was an error.
In the first form, the return value of EXPR is parsed and executed as if it
were a little Perl program. The value of the expression (which is itself
determined within scalar context) is first parsed, and if there weren't any
errors, executed in the context of the current Perl program, so that any
variable settings or subroutine and format definitions remain afterwards.
Note that the value is parsed every time the eval executes. If EXPR is
omitted, evaluates $_
. This form is typically used to delay parsing and subsequent execution of
the text of EXPR until run time.
In the second form, the code within the BLOCK is parsed only once--at the same time the code surrounding the eval itself was parsed--and executed within the context of the current Perl program. This form is typically used to trap exceptions more efficiently than the first (see below), while also providing the benefit of checking the code within BLOCK at compile time.
The final semicolon, if any, may be omitted from the value of EXPR or within the BLOCK.
In both forms, the value returned is the value of the last expression evaluated inside the mini-program; a return statement may be also used, just as with subroutines. The expression providing the return value is evaluated in void, scalar, or list context, depending on the context of the eval itself. See wantarray for more on how the evaluation context can be determined.
If there is a syntax error or runtime error, or a die() statement is executed, an undefined value is returned by eval(), and $@
is set to the error message. If there was no error, $@
is guaranteed to be a null string. Beware that using eval() neither silences perl from printing warnings to STDERR, nor does it stuff
the text of warning messages into $@
. To do either of those, you have to use the $SIG{__WARN__}
facility. See
warn and the perlvar manpage.
Note that, because eval() traps otherwise-fatal errors, it is useful for determining whether a particular feature (such as socket() or symlink()) is implemented. It is also Perl's exception trapping mechanism, where the die operator is used to raise exceptions.
If the code to be executed doesn't vary, you may use the eval-BLOCK form to
trap run-time errors without incurring the penalty of recompiling each
time. The error, if any, is still returned in $@
. Examples:
# make divide-by-zero nonfatal eval { $answer = $a / $b; }; warn $@ if $@;
# same thing, but less efficient eval '$answer = $a / $b'; warn $@ if $@;
# a compile-time error eval { $answer = }; # WRONG
# a run-time error eval '$answer ='; # sets $@
Due to the current arguably broken state of __DIE__
hooks, when using the eval{} form as an exception trap in libraries, you may wish not to trigger any __DIE__
hooks that user code may have installed. You can use the local $SIG{__DIE__}
construct for this purpose, as shown in this example:
# a very private exception trap for divide-by-zero eval { local $SIG{'__DIE__'}; $answer = $a / $b; }; warn $@ if $@;
This is especially significant, given that __DIE__
hooks can call
die() again, which has the effect of changing their error messages:
# __DIE__ hooks may modify error messages { local $SIG{'__DIE__'} = sub { (my $x = $_[0]) =~ s/foo/bar/g; die $x }; eval { die "foo lives here" }; print $@ if $@; # prints "bar lives here" }
Because this promotes action at a distance, this counterintuive behavior may be fixed in a future release.
With an eval(), you should be especially careful to remember what's being looked at when:
eval $x; # CASE 1 eval "$x"; # CASE 2
eval '$x'; # CASE 3 eval { $x }; # CASE 4
eval "\$$x++"; # CASE 5 $$x++; # CASE 6
Cases 1 and 2 above behave identically: they run the code contained in the
variable $x
. (Although case 2 has misleading double quotes making the reader wonder
what else might be happening (nothing is).) Cases 3 and 4 likewise behave
in the same way: they run the code '$x'
, which does nothing but return the value of $x
. (Case 4 is preferred for purely visual reasons, but it also has the
advantage of compiling at compile-time instead of at run-time.) Case 5 is a
place where normally you WOULD like to use double quotes, except that in this particular situation, you
can just use symbolic references instead, as in case 6.
eval BLOCK
does not count as a loop, so the loop control statements
next, last, or redo cannot be used to leave or restart the block.
The exec() function executes a system command AND NEVER RETURNS - use system() instead of exec() if you want it to return. It fails and returns FALSE only if the command does not exist and it is executed directly instead of via your system's command shell (see below).
Since it's a common mistake to use exec() instead of system(), Perl warns you if there is a following statement which isn't die(), warn(), or exit() (if -w
is set - but you always do that). If you
really want to follow an exec() with some other statement, you can use one of these styles to avoid the
warning:
exec ('foo') or print STDERR "couldn't exec foo: $!"; { exec ('foo') }; print STDERR "couldn't exec foo: $!";
If there is more than one argument in LIST, or if LIST is an array with
more than one value, calls execvp(3)
with the arguments in
LIST. If there is only one scalar argument or an array with one element in
it, the argument is checked for shell metacharacters, and if there are any,
the entire argument is passed to the system's command shell for parsing
(this is /bin/sh -c
on Unix platforms, but varies on other platforms). If there are no shell
metacharacters in the argument, it is split into words and passed directly
to execvp()
, which is more efficient. Note:
exec() and system() do not flush your output buffer, so you may need to set $|
to avoid lost output. Examples:
exec '/bin/echo', 'Your arguments are: ', @ARGV; exec "sort $outfile | uniq";
If you don't really want to execute the first argument, but want to lie to the program you are executing about its own name, you can specify the program you actually want to run as an ``indirect object'' (without a comma) in front of the LIST. (This always forces interpretation of the LIST as a multivalued list, even if there is only a single scalar in the list.) Example:
$shell = '/bin/csh'; exec $shell '-sh'; # pretend it's a login shell
or, more directly,
exec {'/bin/csh'} '-sh'; # pretend it's a login shell
When the arguments get executed via the system shell, results will be subject to its quirks and capabilities. See `STRING` for details.
Using an indirect object with exec() or system() is also more secure. This usage forces interpretation of the arguments as a multivalued list, even if the list had just one argument. That way you're safe from the shell expanding wildcards or splitting up words with whitespace in them.
@args = ( "echo surprise" );
exec @args; # subject to shell escapes # if @args == 1 exec { $args[0] } @args; # safe even with one-arg list
The first version, the one without the indirect object, ran the echo
program, passing it "surprise"
an argument. The second version didn't--it tried to run a program literally
called "echo surprise", didn't find it, and set $?
to a non-zero value indicating failure.
Note that exec() will not call your END
blocks, nor will it call any DESTROY
methods in your objects.
Returns TRUE if the specified hash key exists in its hash array, even if the corresponding value is undefined.
print "Exists\n" if exists $array{$key}; print "Defined\n" if defined $array{$key}; print "True\n" if $array{$key};
A hash element can be TRUE only if it's defined, and defined if it exists, but the reverse doesn't necessarily hold true.
Note that the EXPR can be arbitrarily complicated as long as the final operation is a hash key lookup:
if (exists $ref->{A}->{B}->{$key}) { } if (exists $hash{A}{B}{$key}) { }
Although the last element will not spring into existence just because its
existence was tested, intervening ones will. Thus $ref->{"A"}
and $ref->{"A"}->{"B"}
will spring into existence due to the existence test for a
$key
element. This happens anywhere the arrow operator is
used, including even
undef $ref; if (exists $ref->{"Some key"}) { } print $ref; # prints HASH(0x80d3d5c)
This surprising autovivification in what does not at first--or even second--glance appear to be an lvalue context may be fixed in a future release.
Evaluates EXPR and exits immediately with that value. Example:
$ans = <STDIN>; exit 0 if $ans =~ /^[Xx]/;
See also die(). If EXPR is omitted, exits with 0
status. The only universally recognized values for EXPR are 0
for success and 1
for error; other values are subject to interpretation depending on the
environment in which the Perl program is running. For example, exiting 69
(EX_UNAVAILABLE) from a sendmail incoming-mail filter will cause the mailer to return the item undelivered,
but that's not true everywhere.
Don't use exit() to abort a subroutine if there's any chance that someone might want to trap whatever error happened. Use die() instead, which can be trapped by an eval().
The exit()
function does not always exit immediately. It calls
any defined END
routines first, but these END
routines may not themselves abort the exit. Likewise any object destructors
that need to be called are called before the real exit. If this is a
problem, you can call POSIX:_exit($status)
to avoid END and destructor processing. See the perlsub manpage for details.
Returns e (the natural logarithm base) to the power of EXPR. If EXPR is omitted, gives exp($_).
Implements the fcntl(2)
function. You'll probably have to say
use Fcntl;
first to get the correct constant definitions. Argument processing and value return works just like ioctl() below. For example:
use Fcntl; fcntl($filehandle, F_GETFL, $packed_return_buffer) or die "can't fcntl F_GETFL: $!";
You don't have to check for defined() on the return from fnctl()
. Like ioctl(), it maps a 0
return from the system call into ``0
but true'' in Perl. This string is true in boolean context and 0
in numeric context. It is also exempt from the normal -w warnings on improper numeric conversions.
Note that fcntl() will produce a fatal error if used on a machine that doesn't implement
fcntl(2).
See the Fcntl module or your fcntl(2)
manpage to learn what functions are available on your system.
Returns the file descriptor for a filehandle, or undefined if the filehandle is not open. This is mainly useful for constructing bitmaps for select() and low-level POSIX tty-handling operations. If FILEHANDLE is an expression, the value is taken as an indirect filehandle, generally its name.
You can use this to find out whether two handles refer to the same underlying descriptor:
if (fileno(THIS) == fileno(THAT)) { print "THIS and THAT are dups\n"; }
Calls flock(2),
or an emulation of it, on FILEHANDLE. Returns
TRUE for success, FALSE on failure. Produces a fatal error if used on a
machine that doesn't implement flock(2),
fcntl(2)
locking, or lockf(3).
flock() is Perl's portable file locking interface, although it locks only entire
files, not records.
Two potentially non-obvious but traditional flock semantics are that it waits indefinitely until the lock is granted, and that its locks merely advisory. Such discretionary locks are more flexible, but offer fewer guarantees. This means that files locked with flock() may be modified by programs that do not also use flock(). See the perlport manpage, your port's specific documentation, or your system-specific local manpages for details. It's best to assume traditional behavior if you're writing portable programs. (But if you're not, you should as always feel perfectly free to write for your own system's idiosyncrasies (sometimes called ``features''). Slavish adherence to portability concerns shouldn't get in the way of your getting your job done.)
OPERATION is one of LOCK_SH, LOCK_EX, or LOCK_UN, possibly combined with LOCK_NB. These constants are traditionally valued 1, 2, 8 and 4, but you can use the symbolic names if import them from the Fcntl module, either individually, or as a group using the ':flock' tag. LOCK_SH requests a shared lock, LOCK_EX requests an exclusive lock, and LOCK_UN releases a previously requested lock. If LOCK_NB is added to LOCK_SH or LOCK_EX then flock() will return immediately rather than blocking waiting for the lock (check the return status to see if you got it).
To avoid the possibility of miscoordination, Perl now flushes FILEHANDLE before locking or unlocking it.
Note that the emulation built with lockf(3)
doesn't provide
shared locks, and it requires that FILEHANDLE be open with write intent.
These are the semantics that lockf(3)
implements. Most if not
all systems implement lockf(3)
in terms of
fcntl(2)
locking, though, so the differing semantics shouldn't
bite too many people.
Note also that some versions of flock() cannot lock things over the network; you would need to use the more
system-specific fcntl() for that. If you like you can force Perl to ignore your system's
flock(2)
function, and so provide its own
fcntl(2)-based
emulation, by passing the switch -Ud_flock
to the Configure program when you configure perl.
Here's a mailbox appender for BSD systems.
use Fcntl ':flock'; # import LOCK_* constants
sub lock { flock(MBOX,LOCK_EX); # and, in case someone appended # while we were waiting... seek(MBOX, 0, 2); }
sub unlock { flock(MBOX,LOCK_UN); }
open(MBOX, ">>/usr/spool/mail/$ENV{'USER'}") or die "Can't open mailbox: $!";
lock(); print MBOX $msg,"\n\n"; unlock();
On systems that support a real flock(),
locks are inherited
across fork()
calls, whereas those that must resort to the
more capricious fcntl()
function lose the locks, making it
harder to write servers.
See also the DB_File manpage for other flock()
examples.
Does a fork(2)
system call to create a new process running the
same program at the same point. It returns the child pid to the parent
process, 0
to the child process, or undef if the fork is unsuccessful. File descriptors (and sometimes locks on those
descriptors) are shared, while everything else is copied. On most systems
supporting fork(),
great care has gone into making it
extremely efficient (for example, using copy-on-write technology on data
pages), making it the dominant paradigm for multitasking over the last few
decades.
Note: unflushed buffers remain unflushed in both processes, which means you
may need to set $|
($AUTOFLUSH in English) or call the autoflush()
method of IO::Handle
to avoid duplicate output.
If you fork() without ever waiting on your children, you will accumulate zombies. On some
systems, you can avoid this by setting
$SIG{CHLD}
to "IGNORE"
. See also the perlipc manpage for more examples of forking and reaping moribund children.
Note that if your forked child inherits system file descriptors like STDIN and STDOUT that are actually connected by a pipe or socket, even if you exit, then the remote server (such as, say, a CGI script or a backgrounded job launced from a remote shell) won't think you're done. You should reopen those to /dev/null if it's any issue.
Declare a picture format for use by the write() function. For example:
format Something = Test: @<<<<<<<< @||||| @>>>>> $str, $%, '$' . int($num) .
$str = "widget"; $num = $cost/$quantity; $~ = 'Something'; write;
See the perlform manpage for many details and examples.
This is an internal function used by formats, though you may call it, too. It formats (see the perlform manpage) a list of values according to the contents of PICTURE, placing the output
into the format output accumulator, $^A
(or $ACCUMULATOR
in English). Eventually, when a write() is done, the contents of
$^A
are written to some filehandle, but you could also read $^A
yourself and then set $^A
back to ""
. Note that a format typically does one formline() per line of form, but the formline() function itself doesn't care how many newlines are embedded in the PICTURE.
This means that the ~
and ~~
tokens will treat the entire PICTURE as a single line. You may therefore
need to use multiple formlines to implement a single record format, just
like the format compiler.
Be careful if you put double quotes around the picture, because an ``@
'' character may be taken to mean the beginning of an array name.
formline() always returns TRUE. See the perlform manpage for other examples.
Returns the next character from the input file attached to FILEHANDLE, or the undefined value at end of file, or if there was an error. If FILEHANDLE is omitted, reads from STDIN. This is not particularly efficient. However, it cannot be used by itself to fetch single characters without waiting for the user to hit enter. For that, try something more like:
if ($BSD_STYLE) { system "stty cbreak </dev/tty >/dev/tty 2>&1"; } else { system "stty", '-icanon', 'eol', "\001"; }
$key = getc(STDIN);
if ($BSD_STYLE) { system "stty -cbreak </dev/tty >/dev/tty 2>&1"; } else { system "stty", 'icanon', 'eol', '^@'; # ASCII null } print "\n";
Determination of whether $BSD_STYLE
should be set is left as
an exercise to the reader.
The POSIX::getattr()
function can do this more portably on systems purporting POSIX compliance.
See also the Term::ReadKey
module from your nearest CPAN site; details on CPAN can be found on
CPAN.
Implements the C library function of the same name, which on most systems returns the current login from /etc/utmp, if any. If null, use getpwuid().
$login = getlogin || getpwuid($<) || "Kilroy";
Do not consider getlogin() for authentication: it is not as secure as getpwuid().
Returns the packed sockaddr address of other end of the SOCKET connection.
use Socket; $hersockaddr = getpeername(SOCK); ($port, $iaddr) = unpack_sockaddr_in($hersockaddr); $herhostname = gethostbyaddr($iaddr, AF_INET); $herstraddr = inet_ntoa($iaddr);
Returns the current process group for the specified PID. Use a PID of 0
to get the current process group for the current process. Will raise an
exception if used on a machine that doesn't implement
getpgrp(2).
If PID is omitted, returns process group of
current process. Note that the POSIX version of getpgrp()
does not accept a PID argument, so only PID==0
is truly portable.
Returns the process id of the parent process.
Returns the current priority for a process, a process group, or a user.
(See getpriority(2).) Will raise a fatal exception if used on a machine that doesn't implement
getpriority(2).
These routines perform the same functions as their counterparts in the system library. In list context, the return values from the various get routines are as follows:
($name,$passwd,$uid,$gid, $quota,$comment,$gcos,$dir,$shell,$expire) = getpw* ($name,$passwd,$gid,$members) = getgr* ($name,$aliases,$addrtype,$length,@addrs) = gethost* ($name,$aliases,$addrtype,$net) = getnet* ($name,$aliases,$proto) = getproto* ($name,$aliases,$port,$proto) = getserv*
(If the entry doesn't exist you get a null list.)
In scalar context, you get the name, unless the function was a lookup by name, in which case you get the other thing, whatever it is. (If the entry doesn't exist you get the undefined value.) For example:
$uid = getpwnam($name); $name = getpwuid($num); $name = getpwent(); $gid = getgrnam($name); $name = getgrgid($num; $name = getgrent(); #etc.
In getpw*() the fields $quota
, $comment
, and $expire
are special cases in the sense that in many systems they are unsupported.
If the $quota
is unsupported, it is an empty scalar. If it is supported, it usually
encodes the disk quota. If the $comment
field is unsupported, it is an empty scalar. If it is supported it usually
encodes some administrative comment about the user. In some systems the
$quota
field may be $change
or $age
, fields that have to do with password aging. In some systems the $comment
field may be $class
. The $expire
field, if present, encodes the expiration period of the account or the
password. For the availability and the exact meaning of these fields in
your system, please consult your getpwnam(3)
documentation and
your pwd.h file. You can also find out from within Perl what your $quota
and $comment
fields mean and whether you have the $expire
field by using the Config
module and the values d_pwquota
, d_pwage
, d_pwchange
, d_pwcomment
, and d_pwexpire
. Shadow password files are only supported if your vendor has implemented
them in the intuitive fashion that calling the regular C library routines
gets the shadow versions if you're running under privilege. Those that
incorrectly implement a separate library call are not supported.
The $members
value returned by getgr*() is a space separated list of the login names of the members of the group.
For the gethost*() functions, if the h_errno
variable is supported in C, it will be returned to you via $?
if the function call fails. The
@addrs
value returned by a successful call is a list of the raw addresses returned
by the corresponding system library call. In the Internet domain, each
address is four bytes long and you can unpack it by saying something like:
($a,$b,$c,$d) = unpack('C4',$addr[0]);
The Socket library makes this slightly easier:
use Socket; $iaddr = inet_aton("127.1"); # or whatever address $name = gethostbyaddr($iaddr, AF_INET);
# or going the other way $straddr = inet_ntoa($iaddr");
If you get tired of remembering which element of the return list contains
which return value, by-name interfaces are also provided in modules:
File::stat
, Net::hostent
, Net::netent
, Net::protoent
, Net::servent
,
Time::gmtime
, Time::localtime
, and User::grent
. These override the normal built-in, replacing them with versions that
return objects with the appropriate names for each field. For example:
use File::stat; use User::pwent; $is_his = (stat($filename)->uid == pwent($whoever)->uid);
Even though it looks like they're the same method calls (uid), they aren't,
because a File::stat
object is different from a User::pwent
object.
Returns the packed sockaddr address of this end of the SOCKET connection.
use Socket; $mysockaddr = getsockname(SOCK); ($port, $myaddr) = unpack_sockaddr_in($mysockaddr);
Returns the socket option requested, or undef if there is an error.
Returns the value of EXPR with filename expansions such as the standard
Unix shell /bin/csh would do. This is the internal function implementing the <*.c>
operator, but you can use it directly. If EXPR is omitted, $_
is used. The <*.c>
operator is discussed in more detail in I/O Operators.
Converts a time as returned by the time function to a 9-element array with the time localized for the standard Greenwich time zone. Typically used as follows:
# 0 1 2 3 4 5 6 7 8 ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = gmtime(time);
All array elements are numeric, and come straight out of a struct tm. In
particular this means that $mon
has the range 0..11
and $wday
has the range 0..6
with sunday as day 0
. Also, $year
is the number of years since 1900, that is, $year
is 123
in year 2023,
not simply the last two digits of the year. If you assume it is, then you
create non-Y2K-compliant programs--and you wouldn't want to do that, would
you?
If EXPR is omitted, does gmtime(time())
.
In scalar context, returns the ctime(3)
value:
$now_string = gmtime; # e.g., "Thu Oct 13 04:54:34 1994"
Also see the timegm()
function provided by the Time::Local
module, and the strftime(3)
function available via the POSIX
module.
This scalar value is not locale dependent (see the perllocale manpage), but is instead a Perl builtin. Also see the Time::Local
module, and the strftime(3)
and mktime(3)
functions available via the POSIX module. To get somewhat similar but
locale dependent date strings, set up your locale environment variables
appropriately (please see the perllocale manpage) and try for example:
use POSIX qw(strftime); $now_string = strftime "%a %b %e %H:%M:%S %Y", gmtime;
Note that the %a
and %b
escapes, which represent the short forms of the day of the week and the
month of the year, may not necessarily be three characters wide in all
locales.
The goto-LABEL
form finds the statement labeled with LABEL and resumes execution there. It
may not be used to go into any construct that requires initialization, such
as a subroutine or a foreach
loop. It also can't be used to go into a construct that is optimized away,
or to get out of a block or subroutine given to sort(). It can be used to go almost anywhere else within the dynamic scope,
including out of subroutines, but it's usually better to use some other
construct such as last or die(). The author of Perl has never felt the need to use this form of goto (in Perl, that is--C is another matter).
The goto-EXPR
form expects a label name, whose scope will be resolved dynamically. This
allows for computed gotos per FORTRAN, but isn't necessarily recommended if you're optimizing for
maintainability:
goto ("FOO", "BAR", "GLARCH")[$i];
The goto-&NAME
form is highly magical, and substitutes a call to the named subroutine for
the currently running subroutine. This is used by
AUTOLOAD
subroutines that wish to load another subroutine and then pretend that the
other subroutine had been called in the first place (except that any
modifications to @_
in the current subroutine are propagated to the other subroutine.) After
the goto, not even caller()
will be able to tell that this routine was called first.
This is similar in spirit to, but not the same as, grep(1)
and
its relatives. In particular, it is not limited to using regular
expressions.
Evaluates the BLOCK or EXPR for each element of LIST (locally setting
$_
to each element) and returns the list value consisting of those elements
for which the expression evaluated to TRUE. In scalar context, returns the
number of times the expression was TRUE.
@foo = grep(!/^#/, @bar); # weed out comments
or equivalently,
@foo = grep {!/^#/} @bar; # weed out comments
Note that, because $_
is a reference into the list value, it can be used to modify the elements
of the array. While this is useful and supported, it can cause bizarre
results if the LIST is not a named array. Similarly, grep returns aliases
into the original list, much as a for loop's index variable aliases the
list elements. That is, modifying an element of a list returned by grep
(for example, in a foreach
, map()
or another grep()) actually modifies the element in the original list. This is usually
something to be avoided when writing clear code.
See also map for an array composed of the results of the BLOCK or EXPR.
Interprets EXPR as a hex string and returns the corresponding value. (To
convert strings that might start with either 0, 0x, or 0b, see
oct.) If EXPR is omitted, uses $_
.
print hex '0xAf'; # prints '175' print hex 'aF'; # same
There is no builtin import() function. It is just an ordinary method (subroutine) defined (or inherited) by modules that wish to export names to another module. The use() function calls the import() method for the package used. See also use(), the perlmod manpage, and the Exporter manpage.
The index function searches for one string within another, but without the
wildcard-like behavior of a full regular-expression pattern match. It
returns the position of the first occurrence of SUBSTR in STR at or after
POSITION. If POSITION is omitted, starts searching from the beginning of
the string. The return value is based at 0
(or whatever you've set the $[
variable to--but don't do that). If the substring is not found, returns one
less than the base, ordinarily -1
.
Returns the integer portion of EXPR. If EXPR is omitted, uses $_
. You should not use this function for rounding: one because it truncates
towards 0
, and two because machine representations of floating point numbers can
sometimes produce counterintuitive results. For example,
int(-6.725/0.025) produces -268 rather than the correct -269; that's because it's really more
like -268.99999999999994315658 instead. Usually, the sprintf(), printf(), or the POSIX::floor
and POSIX::ceil
functions will serve you better than will int().
Implements the ioctl(2)
function. You'll probably first have
to say
require "ioctl.ph"; # probably in /usr/local/lib/perl/ioctl.ph
to get the correct function definitions. If ioctl.ph doesn't exist or doesn't have the correct definitions you'll have to roll
your own, based on your C header files such as <sys/ioctl.h>. (There is a Perl script called h2ph that comes with the Perl kit that may help you in this, but it's
nontrivial.) SCALAR will be read and/or written depending on the
FUNCTION--a pointer to the string value of SCALAR will be passed as the
third argument of the actual ioctl() call. (If SCALAR has no string value but does have a numeric value, that
value will be passed rather than a pointer to the string value. To
guarantee this to be TRUE, add a 0
to the scalar before using it.) The pack() and unpack()
functions are useful for manipulating the values of structures used by
ioctl(). The following example sets the erase character to DEL.
require 'ioctl.ph'; $getp = &TIOCGETP; die "NO TIOCGETP" if $@ || !$getp; $sgttyb_t = "ccccs"; # 4 chars and a short if (ioctl(STDIN,$getp,$sgttyb)) { @ary = unpack($sgttyb_t,$sgttyb); $ary[2] = 127; $sgttyb = pack($sgttyb_t,@ary); ioctl(STDIN,&TIOCSETP,$sgttyb) || die "Can't ioctl: $!"; }
The return value of ioctl() (and fcntl()) is as follows:
if OS returns: then Perl returns: -1 undefined value 0 string "0 but true" anything else that number
Thus Perl returns TRUE on success and FALSE on failure, yet you can still easily determine the actual value returned by the operating system:
$retval = ioctl(...) || -1; printf "System returned %d\n", $retval;
The special string ``0
but true'' is exempt from -w complaints about improper numeric conversions.
Joins the separate strings of LIST into a single string with fields separated by the value of EXPR, and returns that new string. Example:
$rec = join(':', $login,$passwd,$uid,$gid,$gcos,$home,$shell);
See split.
Returns a list consisting of all the keys of the named hash. (In a scalar context, returns the number of keys.) The keys are returned in an apparently random order. The actual random order is subject to change in future versions of perl, but it is guaranteed to be the same order as either the values() or each() function produces (given that the hash has not been modified). As a side effect, it resets HASH's iterator.
Here is yet another way to print your environment:
@keys = keys %ENV; @values = values %ENV; while ($#keys >= 0) { print pop(@keys), '=', pop(@values), "\n"; }
or how about sorted by key:
foreach $key (sort(keys %ENV)) { print $key, '=', $ENV{$key}, "\n"; }
To sort a hash by value, you'll need to use a sort() function. Here's a descending numeric sort of a hash by its values:
foreach $key (sort { $hash{$b} <=> $hash{$a} } keys %hash) { printf "%4d %s\n", $hash{$key}, $key; }
As an lvalue keys() allows you to increase the number of hash buckets allocated for the given hash. This can gain you a measure of efficiency if you know the hash is going to get big. (This is similar to pre-extending an array by assigning a larger number to $#array.) If you say
keys %hash = 200;
then %hash
will have at least 200 buckets allocated for it--256 of them, in fact,
since it rounds up to the next power of two. These buckets will be retained
even if you do %hash = ()
, use undef
%hash
if you want to free the storage while %hash
is still in scope. You can't shrink the number of buckets allocated for the
hash using
keys() in this way (but you needn't worry about doing this by accident, as trying
has no effect).
Sends a signal to a list of processes. The first element of the list must be the signal to send. Returns the number of processes successfully signaled.
$cnt = kill 1, $child1, $child2; kill 9, @goners;
Unlike in the shell, in Perl if the SIGNAL is negative, it kills process groups instead of processes. (On System V, a negative PROCESS number will also kill process groups, but that's not portable.) That means you usually want to use positive not negative signals. You may also use a signal name in quotes. See Signals for details.
The last command is like the break
statement in C (as used in loops); it immediately exits the loop in
question. If the LABEL is omitted, the command refers to the innermost
enclosing loop. The
continue block, if any, is not executed:
LINE: while (<STDIN>) { last LINE if /^$/; # exit when done with header #... }
last cannot be used to exit a block which returns a value such as
eval {}, sub {} or do {}, and should not be used to exit a grep()
or
map()
operation.
See also continue for an illustration of how last, next, and redo work.
Returns an lowercased version of EXPR. This is the internal function
implementing the \L
escape in double-quoted strings. Respects current LC_CTYPE locale if use locale
in force. See the perllocale manpage.
If EXPR is omitted, uses $_
.
Returns the value of EXPR with the first character lowercased. This is the
internal function implementing the \l
escape in double-quoted strings. Respects current LC_CTYPE locale if use locale
in force. See the perllocale manpage.
If EXPR is omitted, uses $_
.
Returns the length in characters of the value of EXPR. If EXPR is omitted,
returns length of $_
. Note that this cannot be used on an entire array or hash to find out how
many elements these have. For that, use scalar @array
and scalar keys %hash
respectively.
Creates a new filename linked to the old filename. Returns TRUE for success, FALSE otherwise.
Does the same thing that the listen system call does. Returns TRUE if it succeeded, FALSE otherwise. See the example in Sockets: Client/Server Communication.
You really probably want to be using my() instead, because local() isn't what most people think of as ``local''. See Private Variables via my() for details.
A local modifies the listed variables to be local to the enclosing block, file, or eval. If more than one value is listed, the list must be placed in parentheses. See Temporary Values via local() for details, including issues with tied arrays and hashes.
Converts a time as returned by the time function to a 9-element array with the time analyzed for the local time zone. Typically used as follows:
# 0 1 2 3 4 5 6 7 8 ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime(time);
All array elements are numeric, and come straight out of a struct tm. In
particular this means that $mon
has the range 0..11
and $wday
has the range 0..6
with sunday as day 0
. Also, $year
is the number of years since 1900, that is, $year
is 123
in year 2023, and not simply the last two digits of the year. If you assume it is, then you
create non-Y2K-compliant programs--and you wouldn't want to do that, would
you?
If EXPR is omitted, uses the current time (localtime(time)).
In scalar context, returns the ctime(3)
value:
$now_string = localtime; # e.g., "Thu Oct 13 04:54:34 1994"
This scalar value is not locale dependent, see the perllocale manpage, but instead a Perl builtin. Also see the Time::Local
module, and the strftime(3)
and mktime(3)
function available via the POSIX module. To get somewhat similar but locale
dependent date strings, set up your locale environment variables
appropriately (please see the perllocale manpage) and try for example:
use POSIX qw(strftime); $now_string = strftime "%a %b %e %H:%M:%S %Y", localtime;
Note that the %a
and %b
, the short forms of the day of the week and the month of the year, may not
necessarily be three characters wide.
Returns the natural logarithm (base e) of EXPR. If EXPR is omitted, returns log of $_
. To get the log of another base, use basic algebra: The base-N log of a
number is is equal to the natural log of that number divided by the natural
log of N. For example:
sub log10 { my $n = shift; return log($n)/log(10); }
See also exp for the inverse operation.
Does the same thing as the stat() function (including setting the special _
filehandle) but stats a symbolic link instead of the file the symbolic link
points to. If symbolic links are unimplemented on your system, a normal stat() is done.
If EXPR is omitted, stats $_
.
The match operator. See the perlop manpage.
Evaluates the BLOCK or EXPR for each element of LIST (locally setting $_
to each element) and returns the list value composed of the results of each
such evaluation. Evaluates BLOCK or EXPR in a list context, so each element
of LIST may produce zero, one, or more elements in the returned value.
In scalar context, returns the total number of elements so generated.
@chars = map(chr, @nums);
translates a list of numbers to the corresponding characters. And
%hash = map { getkey($_) => $_ } @array;
is just a funny way to write
%hash = (); foreach $_ (@array) { $hash{getkey($_)} = $_; }
Note that, because $_
is a reference into the list value, it can be used to modify the elements
of the array. While this is useful and supported, it can cause bizarre
results if the LIST is not a named array. Using a regular foreach
loop for this purpose would be clearer in most cases. See also grep for an array composed of those items of the original list for which the
BLOCK or EXPR evaluates to true.
Creates the directory specified by FILENAME, with permissions specified by
MODE (as modified by umask). If it succeeds it returns TRUE, otherwise it returns FALSE and sets $!
(errno).
In general, it is better to create directories with permissive MODEs, and
let the user modify that with their umask, than it is to supply a restrictive MODE and give the user no way to be
more permissive. The exceptions to this rule are when the file or directory
should be kept private (mail files, for instance). The
perlfunc(1)
entry on
umask discusses the choice of MODE in more detail.
Calls the System V IPC function msgctl(2).
You'll probably
have to say
use IPC::SysV;
first to get the correct constant definitions. If CMD is IPC_STAT
, then ARG must be a variable which will hold the returned msqid_ds
structure. Returns like ioctl(): the undefined value for error, ``0
but true'' for zero, or the actual return value otherwise. See also
IPC::SysV
and IPC::Semaphore::Msg
documentation.
Calls the System V IPC function msgget(2).
Returns the message
queue id, or the undefined value if there is an error. See also IPC::SysV
and IPC::SysV::Msg
documentation.
Calls the System V IPC function msgsnd to send the message MSG to the
message queue ID. MSG must begin with the long integer message type, which
may be created with pack("l", $type). Returns TRUE if successful, or FALSE if there is an error. See also IPC::SysV
and IPC::SysV::Msg
documentation.
Calls the System V IPC function msgrcv to receive a message from message
queue ID into variable VAR with a maximum message size of SIZE. Note that
if a message is received, the message type will be the first thing in VAR,
and the maximum length of VAR is SIZE plus the size of the message type.
Returns TRUE if successful, or FALSE if there is an error. See also IPC::SysV
and IPC::SysV::Msg
documentation.
A my() declares the listed variables to be local (lexically) to the enclosing block, file, or eval(). If more than one value is listed, the list must be placed in parentheses. See Private Variables via my() for details.
The next command is like the continue statement in C; it starts the next iteration of the loop:
LINE: while (<STDIN>) { next LINE if /^#/; # discard comments #... }
Note that if there were a continue block on the above, it would get executed even on discarded lines. If the LABEL is omitted, the command refers to the innermost enclosing loop.
next cannot be used to exit a block which returns a value such as
eval {}, sub {} or do {}, and should not be used to exit a grep()
or
map()
operation.
See also continue for an illustration of how last, next, and redo work.
Interprets EXPR as an octal string and returns the corresponding value. (If
EXPR happens to start off with 0x
, interprets it as a hex string. If EXPR starts off with 0b
, it is interpreted as a binary string.) The following will handle decimal,
binary, octal, and hex in the standard Perl or C notation:
$val = oct($val) if $val =~ /^0/;
If EXPR is omitted, uses $_
. This function is commonly used when a string such as 644
needs to be converted into a file mode, for example. (Although perl will
automatically convert strings into numbers as needed, this automatic
conversion assumes base 10.)
Opens the file whose filename is given by EXPR, and associates it with FILEHANDLE. If FILEHANDLE is an expression, its value is used as the name of the real filehandle wanted. If EXPR is omitted, the scalar variable of the same name as the FILEHANDLE contains the filename. (Note that lexical variables--those declared with my()--will not work for this purpose; so if you're using my(), specify EXPR in your call to open.) See the perlopentut manpage for a kinder, gentler explanation of opening files.
If the filename begins with '<'
or nothing, the file is opened for input. If the filename begins with '>'
, the file is truncated and opened for output, being created if necessary.
If the filename begins with '>>'
, the file is opened for appending, again being created if necessary. You
can put a '+'
in front of the '>'
or '<'
to indicate that you want both read and write access to the file; thus '+<'
is almost always preferred for read/write updates--the '+>'
mode would clobber the file first. You can't usually use either read-write
mode for updating textfiles, since they have variable length records. See
the -i
switch in the perlrun manpage for a better approach. The file is created with permissions of 0666
modified by the process' umask value.
The prefix and the filename may be separated with spaces. These various
prefixes correspond to the fopen(3)
modes of 'r'
, 'r+'
, 'w'
,
'w+'
, 'a'
, and 'a+'
.
If the filename begins with '|'
, the filename is interpreted as a command to which output is to be piped,
and if the filename ends with a
'|'
, the filename is interpreted as a command which pipes output to us. See Using open() for IPC
for more examples of this. (You are not allowed to open() to a command that pipes both in and out, but see IPC::Open2, IPC::Open3, and Bidirectional Communication for alternatives.)
Opening '-'
opens STDIN and opening '>-'
opens STDOUT. Open returns nonzero upon success, the undefined value
otherwise. If the open()
involved a pipe, the return value happens to be the pid of the subprocess.
If you're unfortunate enough to be running Perl on a system that
distinguishes between text files and binary files (modern operating systems
don't care), then you should check out binmode for tips for dealing with this. The key distinction between systems that
need binmode()
and those that don't is their text file formats. Systems like Unix, MacOS,
and Plan9, which delimit lines with a single character, and which encode
that character in C as "\n"
, do not need binmode(). The rest need it.
When opening a file, it's usually a bad idea to continue normal execution if the request failed, so open() is frequently used in connection with die(). Even if die() won't do what you want (say, in a CGI script, where you want to make a nicely formatted error message (but there are modules that can help with that problem)) you should always check the return value from opening a file. The infrequent exception is when working with an unopened filehandle is actually what you want to do.
Examples:
$ARTICLE = 100; open ARTICLE or die "Can't find article $ARTICLE: $!\n"; while (<ARTICLE>) {...
open(LOG, '>>/usr/spool/news/twitlog'); # (log is reserved) # if the open fails, output is discarded
open(DBASE, '+<dbase.mine') # open for update or die "Can't open 'dbase.mine' for update: $!";
open(ARTICLE, "caesar <$article |") # decrypt article or die "Can't start caesar: $!";
open(EXTRACT, "|sort >/tmp/Tmp$$") # $$ is our process id or die "Can't start sort: $!";
# process argument list of files along with any includes
foreach $file (@ARGV) { process($file, 'fh00'); }
sub process { my($filename, $input) = @_; $input++; # this is a string increment unless (open($input, $filename)) { print STDERR "Can't open $filename: $!\n"; return; }
local $_; while (<$input>) { # note use of indirection if (/^#include "(.*)"/) { process($1, $input); next; } #... # whatever } }
You may also, in the Bourne shell tradition, specify an EXPR beginning with '>&'
, in which case the rest of the string is interpreted as the name of a
filehandle (or file descriptor, if numeric) to be duped and opened. You may
use &
after >
, >>
, <
, +>
,
+>>
, and +<
. The mode you specify should match the mode of the original filehandle.
(Duping a filehandle does not take into account any existing contents of
stdio buffers.) Here is a script that saves, redirects, and restores STDOUT
and STDERR:
#!/usr/bin/perl open(OLDOUT, ">&STDOUT"); open(OLDERR, ">&STDERR");
open(STDOUT, ">foo.out") || die "Can't redirect stdout"; open(STDERR, ">&STDOUT") || die "Can't dup stdout";
select(STDERR); $| = 1; # make unbuffered select(STDOUT); $| = 1; # make unbuffered
print STDOUT "stdout 1\n"; # this works for print STDERR "stderr 1\n"; # subprocesses too
close(STDOUT); close(STDERR);
open(STDOUT, ">&OLDOUT"); open(STDERR, ">&OLDERR");
print STDOUT "stdout 2\n"; print STDERR "stderr 2\n";
If you specify '<&=N'
, where N
is a number, then Perl will do an equivalent of C's fdopen()
of that file descriptor; this is more parsimonious of file descriptors. For
example:
open(FILEHANDLE, "<&=$fd")
If you open a pipe on the command '-'
, i.e., either '|-'
or '-|'
, then there is an implicit fork done, and the return value of open is the
pid of the child within the parent process, and 0
within the child process. (Use defined($pid) to determine whether the open was successful.) The filehandle behaves
normally for the parent, but i/o to that filehandle is piped from/to the
STDOUT/STDIN of the child process. In the child process the filehandle
isn't opened--i/o happens from/to the new STDOUT or STDIN. Typically this
is used like the normal piped open when you want to exercise more control
over just how the pipe command gets executed, such as when you are running
setuid, and don't want to have to scan shell commands for metacharacters.
The following pairs are more or less equivalent:
open(FOO, "|tr '[a-z]' '[A-Z]'"); open(FOO, "|-") || exec 'tr', '[a-z]', '[A-Z]';
open(FOO, "cat -n '$file'|"); open(FOO, "-|") || exec 'cat', '-n', $file;
See Safe Pipe Opens for more examples of this.
NOTE: On any operation that may do a fork, any unflushed buffers remain
unflushed in both processes, which means you may need to set $|
to avoid duplicate output. On systems that support a close-on-exec flag on
files, the flag will be set for the newly opened file descriptor as
determined by the value of $^F. See $^F.
Closing any piped filehandle causes the parent process to wait for the
child to finish, and returns the status value in $?
.
The filename passed to open will have leading and trailing whitespace deleted, and the normal redirection characters honored. This property, known as ``magic open'', can often be used to good effect. A user could specify a filename of "rsh cat file |", or you could change certain filenames as needed:
$filename =~ s/(.*\.gz)\s*$/gzip -dc < $1|/; open(FH, $filename) or die "Can't open $filename: $!";
However, to open a file with arbitrary weird characters in it, it's necessary to protect any leading and trailing whitespace:
$file =~ s#^(\s)#./$1#; open(FOO, "< $file\0");
If you want a ``real'' C open() (see open(2) on your system), then you should use the sysopen() function, which involves no such magic. This is another way to protect your filenames from interpretation. For example:
use IO::Handle; sysopen(HANDLE, $path, O_RDWR|O_CREAT|O_EXCL) or die "sysopen $path: $!"; $oldfh = select(HANDLE); $| = 1; select($oldfh); print HANDLE "stuff $$\n"); seek(HANDLE, 0, 0); print "File contains: ", <HANDLE>;
Using the constructor from the IO::Handle
package (or one of its subclasses, such as IO::File
or IO::Socket
), you can generate anonymous filehandles that have the scope of whatever
variables hold references to them, and automatically close whenever and
however you leave that scope:
use IO::File; #... sub read_myfile_munged { my $ALL = shift; my $handle = new IO::File; open($handle, "myfile") or die "myfile: $!"; $first = <$handle> or return (); # Automatically closed here. mung $first or die "mung failed"; # Or here. return $first, <$handle> if $ALL; # Or here. $first; # Or here. }
See seek for some details about mixing reading and writing.
Opens a directory named EXPR for processing by readdir(), telldir(), seekdir(), rewinddir(), and closedir(). Returns TRUE if successful. DIRHANDLEs have their own namespace separate from FILEHANDLEs.
Returns the numeric ascii value of the first character of EXPR. If EXPR is
omitted, uses $_
. For the reverse, see chr.
Takes an array or list of values and packs it into a binary structure, returning the string containing the structure. The TEMPLATE is a sequence of characters that give the order and type of values, as follows:
a A string with arbitrary binary data, will be null padded. A An ascii string, will be space padded. Z A null terminated (asciz) string, will be null padded.
b A bit string (ascending bit order, like vec()). B A bit string (descending bit order). h A hex string (low nybble first). H A hex string (high nybble first).
c A signed char value. C An unsigned char value.
s A signed short value. S An unsigned short value. (This 'short' is _exactly_ 16 bits, which may differ from what a local C compiler calls 'short'.)
i A signed integer value. I An unsigned integer value. (This 'integer' is _at least_ 32 bits wide. Its exact size depends on what a local C compiler calls 'int', and may even be larger than the 'long' described in the next item.)
l A signed long value. L An unsigned long value. (This 'long' is _exactly_ 32 bits, which may differ from what a local C compiler calls 'long'.)
n A short in "network" (big-endian) order. N A long in "network" (big-endian) order. v A short in "VAX" (little-endian) order. V A long in "VAX" (little-endian) order. (These 'shorts' and 'longs' are _exactly_ 16 bits and _exactly_ 32 bits, respectively.)
q A signed quad (64-bit) value. Q An unsigned quad value. (Available only if your system supports 64-bit integer values _and_ if Perl has been compiled to support those. Causes a fatal error otherwise.)
f A single-precision float in the native format. d A double-precision float in the native format.
p A pointer to a null-terminated string. P A pointer to a structure (fixed-length string).
u A uuencoded string.
w A BER compressed integer. Its bytes represent an unsigned integer in base 128, most significant digit first, with as few digits as possible. Bit eight (the high bit) is set on each byte except the last.
x A null byte. X Back up a byte. @ Null fill to absolute position.
The following rules apply:
Each letter may optionally be followed by a number giving a repeat count.
With all types except "a"
, "A"
, "Z"
, "b"
, "B"
, "h"
,
"H"
, and "P"
the pack function will gobble up that many values from the LIST. A *
for the repeat count means to use however many items are left.
The "a"
, "A"
, and "Z"
types gobble just one value, but pack it as a string of length count,
padding with nulls or spaces as necessary. When unpacking, "A"
strips trailing spaces and nulls, "Z"
strips everything after the first null, and "a"
returns data verbatim.
Likewise, the "b"
and "B"
fields pack a string that many bits long.
The "h"
and "H"
fields pack a string that many nybbles long.
The "p"
type packs a pointer to a null-terminated string. You are responsible for
ensuring the string is not a temporary value (which can potentially get
deallocated before you get around to using the packed result). The "P"
type packs a pointer to a structure of the size indicated by the length. A
NULL pointer is created if the corresponding value for "p"
or
"P"
is undef.
The integer formats "s", "S"
, "i"
, "I"
, "l"
, and "L"
are inherently non-portable between processors and operating systems
because they obey the native byteorder and endianness. For example a 4-byte
integer 0x87654321 (2271560481 decimal) be ordered natively (arranged in
and handled by the CPU registers) into bytes as 0x12 0x34 0x56 0x78 #
little-endian 0x78 0x56 0x34 0x12 # big-endian Basically, the Intel, Alpha,
and VAX CPUs and little-endian, while everybody else, for example Motorola
m68k/88k, PPC, Sparc, HP PA, Power, and Cray are big-endian. MIPS can be
either: Digital used it in little-endian mode, SGI uses it in big-endian
mode.
The names `big-endian' and `little-endian' are joking references to the classic ``Gulliver's Travels'' (via the paper ``On Holy Wars and a Plea for Peace'' by Danny Cohen, USC/ISI IEN 137, April 1, 1980) and the egg-eating habits of the lilliputs. Some systems may even have weird byte orders such as 0x56 0x78 0x12 0x34 0x34 0x12 0x78 0x56 You can see your system's preference with
print join(" ", map { sprintf "%#02x", $_ } unpack("C*",pack("L",0x12345678))), "\n";
The byteorder on the platform where Perl was built is also available via the Config manpage:
use Config; print $Config{byteorder}, "\n";
Byteorders '1234'
and '12345678'
are little-endian, '4321'
and '87654321'
are big-endian.
If you want portable packed integers use the formats "n"
, "N"
,
"v"
, and "V"
, their byte endianness and size is known.
Real numbers (floats and doubles) are in the native machine format only; due to the multiplicity of floating formats around, and the lack of a standard ``network'' representation, no facility for interchange has been made. This means that packed floating point data written on one machine may not be readable on another - even if both use IEEE floating point arithmetic (as the endian-ness of the memory representation is not part of the IEEE spec).
Note that Perl uses doubles internally for all numeric calculation, and
converting from double into float and thence back to double again will lose
precision (i.e., unpack("f", pack("f", $foo)
) will not in general equal $foo
).
Examples:
$foo = pack("CCCC",65,66,67,68); # foo eq "ABCD" $foo = pack("C4",65,66,67,68); # same thing
$foo = pack("ccxxcc",65,66,67,68); # foo eq "AB\0\0CD"
$foo = pack("s2",1,2); # "\1\0\2\0" on little-endian # "\0\1\0\2" on big-endian
$foo = pack("a4","abcd","x","y","z"); # "abcd"
$foo = pack("aaaa","abcd","x","y","z"); # "axyz"
$foo = pack("a14","abcdefg"); # "abcdefg\0\0\0\0\0\0\0"
$foo = pack("i9pl", gmtime); # a real struct tm (on my system anyway)
$utmp_template = "Z8 Z8 Z16 L"; $utmp = pack($utmp_template, @utmp1); # a struct utmp (BSDish)
@utmp2 = unpack($utmp_template, $utmp); # "@utmp1" eq "@utmp2"
sub bintodec { unpack("N", pack("B32", substr("0" x 32 . shift, -32))); }
The same template may generally also be used in unpack().
Declares the compilation unit as being in the given namespace. The scope of
the package declaration is from the declaration itself through the end of
the enclosing block, file, or eval (the same as the my() operator). All further unqualified dynamic identifiers will be in this
namespace. A package statement affects only dynamic variables--including
those you've used local() on--but not lexical variables, which are created with my(). Typically it would be the first declaration in a file to be included by
the require or use operator. You can switch into a package in more than one place; it merely
influences which symbol table is used by the compiler for the rest of that
block. You can refer to variables and filehandles in other packages by
prefixing the identifier with the package name and a double colon: $Package::Variable
. If the package name is null, the main
package as assumed. That is,
$::sail
is equivalent to $main::sail
(as well as to $main'sail
, still seen in older code).
If NAMESPACE is omitted, then there is no current package, and all
identifiers must be fully qualified or lexicals. This is stricter than use strict
, since it also extends to function names.
See Packages for more information about packages, modules, and classes. See the perlsub manpage for other scoping issues.
Opens a pair of connected pipes like the corresponding system call. Note
that if you set up a loop of piped processes, deadlock can occur unless you
are very careful. In addition, note that Perl's pipes use stdio buffering,
so you may need to set $|
to flush your WRITEHANDLE after each command, depending on the application.
See IPC::Open2, IPC::Open3, and Bidirectional Communication for examples of such things.
On systems that support a close-on-exec flag on files, the flag will be set for the newly opened file descriptors as determined by the value of $^F. See $^F.
Pops and returns the last value of the array, shortening the array by one element. Has a similar effect to
$tmp = $ARRAY[$#ARRAY--];
If there are no elements in the array, returns the undefined value. If
ARRAY is omitted, pops the @ARGV
array in the main program, and the @_
array in subroutines, just like shift().
Returns the offset of where the last m//g
search left off for the variable is in question ($_
is used when the variable is not specified). May be modified to change that
offset. Such modification will also influence the \G
zero-width assertion in regular expressions. See the perlre manpage and
the perlop manpage.
Prints a string or a comma-separated list of strings. Returns TRUE if
successful. FILEHANDLE may be a scalar variable name, in which case the
variable contains the name of or a reference to the filehandle, thus
introducing one level of indirection. (NOTE: If FILEHANDLE is a variable
and the next token is a term, it may be misinterpreted as an operator
unless you interpose a +
or put parentheses around the arguments.) If FILEHANDLE is omitted, prints
by default to standard output (or to the last selected output channel--see select). If LIST is also omitted, prints $_
to the currently selected output channel. To set the default output channel
to something other than STDOUT use the select operation. Note that, because
print takes a LIST, anything in the LIST is evaluated in list context, and
any subroutine that you call will have one or more of its expressions
evaluated in list context. Also be careful not to follow the print keyword
with a left parenthesis unless you want the corresponding right parenthesis
to terminate the arguments to the print--interpose a +
or put parentheses around all the arguments.
Note that if you're storing FILEHANDLES in an array or other expression, you will have to use a block returning its value instead:
print { $files[$i] } "stuff\n"; print { $OK ? STDOUT : STDERR } "stuff\n";
Equivalent to print FILEHANDLE sprintf(FORMAT, LIST)
, except that $\
(the output record separator) is not appended. The first argument of the
list will be interpreted as the printf() format. If use locale
is in effect, the character used for the decimal point in formatted real
numbers is affected by the LC_NUMERIC locale. See the perllocale manpage.
Don't fall into the trap of using a printf() when a simple print() would do. The print() is more efficient and less error prone.
Returns the prototype of a function as a string (or undef if the function has no prototype). FUNCTION is a reference to, or the name of, the function whose prototype you want to retrieve.
If FUNCTION is a string starting with CORE::
, the rest is taken as a name for Perl builtin. If the builtin is not overridable (such as
qw//) or its arguments cannot be expressed by a prototype (such as
system()) returns undef because the builtin does not really behave like a Perl function. Otherwise,
the string describing the equivalent prototype is returned.
Treats ARRAY as a stack, and pushes the values of LIST onto the end of ARRAY. The length of ARRAY increases by the length of LIST. Has the same effect as
for $value (LIST) { $ARRAY[++$#ARRAY] = $value; }
but is more efficient. Returns the new number of elements in the array.
Generalized quotes. See Regexp Quote-Like Operators.
Returns the value of EXPR with all non-alphanumeric characters backslashed.
(That is, all characters not matching
/[A-Za-z_0-9]/
will be preceded by a backslash in the returned string, regardless of any
locale settings.) This is the internal function implementing the \Q
escape in double-quoted strings.
If EXPR is omitted, uses $_
.
Returns a random fractional number greater than or equal to 0
and less than the value of EXPR. (EXPR should be positive.) If EXPR is
omitted, the value 1
is used. Automatically calls srand() unless
srand() has already been called. See also srand().
(Note: If your rand function consistently returns numbers that are too large or too small, then your version of Perl was probably compiled with the wrong number of RANDBITS.)
Attempts to read LENGTH bytes of data into variable SCALAR from the
specified FILEHANDLE. Returns the number of bytes actually read,
0
at end of file, or undef if there was an error. SCALAR will be grown or
shrunk to the length actually read. An OFFSET may be specified to place the
read data at some other place than the beginning of the string. This call
is actually implemented in terms of stdio's fread(3)
call. To
get a true read(2)
system call, see sysread().
Returns the next directory entry for a directory opened by opendir(). If used in list context, returns all the rest of the entries in the directory. If there are no more entries, returns an undefined value in scalar context or a null list in list context.
If you're planning to filetest the return values out of a readdir(), you'd better prepend the directory in question. Otherwise, because we didn't chdir() there, it would have been testing the wrong file.
opendir(DIR, $some_dir) || die "can't opendir $some_dir: $!"; @dots = grep { /^\./ && -f "$some_dir/$_" } readdir(DIR); closedir DIR;
Reads from the filehandle whose typeglob is contained in EXPR. In scalar
context, each call reads and returns the next line, until end-of-file is
reached, whereupon the subsequent call returns undef. In list context,
reads until end-of-file is reached and returns a list of lines. Note that
the notion of ``line'' used here is however you may have defined it with $/
or $INPUT_RECORD_SEPARATOR
). See $/.
When $/
is set to undef, when readline()
is in scalar context (i.e. file slurp mode),
and when an empty file is read, it returns ''
the first time, followed by undef subsequently.
This is the internal function implementing the <EXPR>
operator, but you can use it directly. The <EXPR>
operator is discussed in more detail in I/O Operators.
$line = <STDIN>; $line = readline(*STDIN); # same thing
Returns the value of a symbolic link, if symbolic links are implemented. If
not, gives a fatal error. If there is some system error, returns the
undefined value and sets $!
(errno). If EXPR is omitted, uses $_
.
EXPR is executed as a system command. The collected standard output of the
command is returned. In scalar context, it comes back as a single
(potentially multi-line) string. In list context, returns a list of lines
(however you've defined lines with $/
or $INPUT_RECORD_SEPARATOR
). This is the internal function implementing the qx/EXPR/
operator, but you can use it directly. The qx/EXPR/
operator is discussed in more detail in I/O Operators.
Receives a message on a socket. Attempts to receive LENGTH bytes of data
into variable SCALAR from the specified SOCKET filehandle. Actually does a
C recvfrom()
, so that it can return the address of the sender. Returns the undefined
value if there's an error. SCALAR will be grown or shrunk to the length
actually read. Takes the same flags as the system call of the same name.
See UDP: Message Passing for examples.
The redo command restarts the loop block without evaluating the conditional again. The continue block, if any, is not executed. If the LABEL is omitted, the command refers to the innermost enclosing loop. This command is normally used by programs that want to lie to themselves about what was just input:
# a simpleminded Pascal comment stripper # (warning: assumes no { or } in strings) LINE: while (<STDIN>) { while (s|({.*}.*){.*}|$1 |) {} s|{.*}| |; if (s|{.*| |) { $front = $_; while (<STDIN>) { if (/}/) { # end of comment? s|^|$front\{|; redo LINE; } } } print; }
redo cannot be used to retry a block which returns a value such as
eval {}, sub {} or do {}, and should not be used to exit a grep()
or
map()
operation.
See also continue for an illustration of how last, next, and redo work.
Returns a TRUE value if EXPR is a reference, FALSE otherwise. If EXPR is
not specified, $_
will be used. The value returned depends on the type of thing the reference
is a reference to. Builtin types include:
REF SCALAR ARRAY HASH CODE GLOB
If the referenced object has been blessed into a package, then that package
name is returned instead. You can think of ref() as a typeof()
operator.
if (ref($r) eq "HASH") { print "r is a reference to a hash.\n"; } unless (ref($r)) { print "r is not a reference at all.\n"; } if (UNIVERSAL::isa($r, "HASH")) { # for subclassing print "r is a reference to something that isa hash.\n"; }
See also the perlref manpage.
Changes the name of a file. Returns 1
for success, 0
otherwise. Behavior of this function varies wildly depending on your system
implementation. For example, it will usually not work across file system
boundaries, even though the system mv command sometimes compensates for this. Other restrictions include whether
it works on directories, open files, or pre-existing files. Check the perlport manpage and either the rename(2)
manpage or equivalent system
documentation for details.
Demands some semantics specified by EXPR, or by $_
if EXPR is not supplied. If EXPR is numeric, demands that the current
version of Perl ($]
or $PERL_VERSION) be equal or greater than EXPR.
Otherwise, demands that a library file be included if it hasn't already been included. The file is included via the do-FILE mechanism, which is essentially just a variety of eval(). Has semantics similar to the following subroutine:
sub require { my($filename) = @_; return 1 if $INC{$filename}; my($realfilename,$result); ITER: { foreach $prefix (@INC) { $realfilename = "$prefix/$filename"; if (-f $realfilename) { $result = do $realfilename; last ITER; } } die "Can't find $filename in \@INC"; } die $@ if $@; die "$filename did not return true value" unless $result; $INC{$filename} = $realfilename; return $result; }
Note that the file will not be included twice under the same specified
name. The file must return TRUE as the last statement to indicate
successful execution of any initialization code, so it's customary to end
such a file with ``1;
'' unless you're sure it'll return TRUE otherwise. But it's better just to
put the ``1;
'', in case you add more statements.
If EXPR is a bareword, the require assumes a ``.pm'' extension and replaces ``::'' with ``/'' in the filename for you, to make it easy to load standard modules. This form of loading of modules does not risk altering your namespace.
In other words, if you try this:
require Foo::Bar; # a splendid bareword
The require function will actually look for the ``Foo/Bar.pm'' file in the directories specified in the @INC
array.
But if you try this:
$class = 'Foo::Bar'; require $class; # $class is not a bareword #or require "Foo::Bar"; # not a bareword because of the ""
The require function will look for the ``Foo::Bar'' file in the @INC
array and will complain about not finding
``Foo::Bar'' there. In this case you can do:
eval "require $class";
For a yet-more-powerful import facility, see use and the perlmod manpage.
Generally used in a continue block at the end of a loop to clear variables and reset ??
searches so that they work again. The expression is interpreted as a list
of single characters (hyphens allowed for ranges). All variables and arrays
beginning with one of those letters are reset to their pristine state. If
the expression is omitted, one-match searches (?pattern?
) are reset to match again. Resets only variables or searches in the
current package. Always returns 1. Examples:
reset 'X'; # reset all X variables reset 'a-z'; # reset lower case variables reset; # just reset ?one-time? searches
Resetting "A-Z"
is not recommended because you'll wipe out your
@ARGV
and @INC
arrays and your %ENV
hash. Resets only package variables--lexical variables are unaffected, but
they clean themselves up on scope exit anyway, so you'll probably want to
use them instead. See my.
Returns from a subroutine, eval(), or do FILE
with the value given in EXPR. Evaluation of EXPR may be in list, scalar, or
void context, depending on how the return value will be used, and the
context may vary from one execution to the next (see wantarray()). If no EXPR is given, returns an empty list in list context, the
undefined value in scalar context, and (of course) nothing at all in a void
context.
(Note that in the absence of a explicit return, a subroutine, eval, or do FILE will automatically return the value of the last expression evaluated.)
In list context, returns a list value consisting of the elements of LIST in the opposite order. In scalar context, concatenates the elements of LIST and returns a string value with all characters in the opposite order.
print reverse <>; # line tac, last line first
undef $/; # for efficiency of <> print scalar reverse <>; # character tac, last line tsrif
This operator is also handy for inverting a hash, although there are some caveats. If a value is duplicated in the original hash, only one of those can be represented as a key in the inverted hash. Also, this has to unwind one hash and build a whole new one, which may take some time on a large hash, such as from a DBM file.
%by_name = reverse %by_address; # Invert the hash
Sets the current position to the beginning of the directory for the readdir() routine on DIRHANDLE.
Works just like index()
except that it returns the position of
the LAST occurrence of SUBSTR in STR. If POSITION is specified, returns the
last occurrence at or before that position.
Deletes the directory specified by FILENAME if that directory is empty. If
it succeeds it returns TRUE, otherwise it returns FALSE and sets $!
(errno). If FILENAME is omitted, uses $_
.
The substitution operator. See the perlop manpage.
Forces EXPR to be interpreted in scalar context and returns the value of EXPR.
@counts = ( scalar @a, scalar @b, scalar @c );
There is no equivalent operator to force an expression to be interpolated
in list context because in practice, this is never needed. If you really
wanted to do so, however, you could use the construction @{[ (some expression) ]}
, but usually a simple
(some expression)
suffices.
Since scalar is a unary operator, if you accidentally use for EXPR a parenthesized list, this behaves as a scalar comma expression, evaluating all but the last element in void context and returning the final element evaluated in scalar context. This is seldom what you want.
The following single statement:
print uc(scalar(&foo,$bar)),$baz;
is the moral equivalent of these two:
&foo; print(uc($bar),$baz);
See the perlop manpage for more details on unary operators and the comma operator.
Sets FILEHANDLE's position, just like the fseek()
call of stdio()
. FILEHANDLE may be an expression whose value gives the name of the
filehandle. The values for WHENCE are 0
to set the new position to POSITION, 1
to set it to the current position plus POSITION, and 2
to set it to EOF plus POSITION (typically negative). For WHENCE you may use
the constants SEEK_SET
, SEEK_CUR
, and SEEK_END
from either the
IO::Seekable
or the POSIX module. Returns 1
upon success, 0
otherwise.
If you want to position file for sysread() or syswrite(), don't use seek() -- buffering makes its effect on the file's system position unpredictable and non-portable. Use sysseek() instead.
Due to the rules and rigors of ANSI C, on some systems you have to do a
seek whenever you switch between reading and writing. Amongst other things,
this may have the effect of calling stdio's clearerr(3).
A
WHENCE of 1
(SEEK_CUR
) is useful for not moving the file position:
seek(TEST,0,1);
This is also useful for applications emulating tail -f
. Once you hit EOF on your read, and then sleep for a while, you might have
to stick in a seek()
to reset things. The seek() doesn't change the current position, but it does clear the end-of-file condition on the handle, so that the next <FILE>
makes Perl try again to read something. We hope.
If that doesn't work (some stdios are particularly cantankerous), then you may need something more like this:
for (;;) { for ($curpos = tell(FILE); $_ = <FILE>; $curpos = tell(FILE)) { # search for some stuff and put it into files } sleep($for_a_while); seek(FILE, $curpos, 0); }
Sets the current position for the readdir() routine on DIRHANDLE. POS must be a value returned by telldir(). Has the same caveats about possible directory compaction as the corresponding system library routine.
Returns the currently selected filehandle. Sets the current default filehandle for output, if FILEHANDLE is supplied. This has two effects: first, a write() or a print() without a filehandle will default to this FILEHANDLE. Second, references to variables related to output will refer to this output channel. For example, if you have to set the top of form format for more than one output channel, you might do the following:
select(REPORT1); $^ = 'report1_top'; select(REPORT2); $^ = 'report2_top';
FILEHANDLE may be an expression whose value gives the name of the actual filehandle. Thus:
$oldfh = select(STDERR); $| = 1; select($oldfh);
Some programmers may prefer to think of filehandles as objects with methods, preferring to write the last example as:
use IO::Handle; STDERR->autoflush(1);
This calls the select(2)
system call with the bit masks
specified, which can be constructed using fileno() and vec(), along these lines:
$rin = $win = $ein = ''; vec($rin,fileno(STDIN),1) = 1; vec($win,fileno(STDOUT),1) = 1; $ein = $rin | $win;
If you want to select on many filehandles you might wish to write a subroutine:
sub fhbits { my(@fhlist) = split(' ',$_[0]); my($bits); for (@fhlist) { vec($bits,fileno($_),1) = 1; } $bits; } $rin = fhbits('STDIN TTY SOCK');
The usual idiom is:
($nfound,$timeleft) = select($rout=$rin, $wout=$win, $eout=$ein, $timeout);
or to block until something becomes ready just do this
$nfound = select($rout=$rin, $wout=$win, $eout=$ein, undef);
Most systems do not bother to return anything useful in $timeleft
, so calling select()
in scalar context just returns $nfound
.
Any of the bit masks can also be undef. The timeout, if specified, is in
seconds, which may be fractional. Note: not all implementations are capable
of returning the$timeleft
. If not, they always return
$timeleft
equal to the supplied $timeout
.
You can effect a sleep of 250 milliseconds this way:
select(undef, undef, undef, 0.25);
WARNING: One should not attempt to mix buffered I/O (like read() or <FH>) with select(), except as permitted by POSIX, and even then only on POSIX systems. You have to use sysread() instead.
Calls the System V IPC function semctl(). You'll probably have to say
use IPC::SysV;
first to get the correct constant definitions. If CMD is IPC_STAT or
GETALL, then ARG must be a variable which will hold the returned semid_ds
structure or semaphore value array. Returns like ioctl(): the undefined value for error, ``0
but true'' for zero, or the actual return value otherwise. See also IPC::SysV
and IPC::Semaphore
documentation.
Calls the System V IPC function semget. Returns the semaphore id, or the
undefined value if there is an error. See also IPC::SysV
and
IPC::SysV::Semaphore
documentation.
Calls the System V IPC function semop to perform semaphore operations such
as signaling and waiting. OPSTRING must be a packed array of semop
structures. Each semop structure can be generated with
pack("sss", $semnum, $semop, $semflag). The number of semaphore operations is implied by the length of OPSTRING.
Returns TRUE if successful, or FALSE if there is an error. As an example,
the following code waits on semaphore $semnum
of semaphore id $semid
:
$semop = pack("sss", $semnum, -1, 0); die "Semaphore trouble: $!\n" unless semop($semid, $semop);
To signal the semaphore, replace -1
with 1
. See also IPC::SysV
and IPC::SysV::Semaphore
documentation.
Sends a message on a socket. Takes the same flags as the system call of the
same name. On unconnected sockets you must specify a destination to send
TO, in which case it does a C sendto()
. Returns the number of characters sent, or the undefined value if there is
an error. The C system call sendmsg(2)
is currently
unimplemented. See UDP: Message Passing for examples.
Sets the current process group for the specified PID, 0
for the current process. Will produce a fatal error if used on a machine
that doesn't implement setpgrp(2).
If the arguments are
omitted, it defaults to
0,0
. Note that the POSIX version of setpgrp() does not accept any arguments, so only setpgrp(0,0) is portable. See also POSIX::setsid()
.
Sets the current priority for a process, a process group, or a user. (See
setpriority(2).)
Will produce a fatal error if used on a
machine that doesn't implement setpriority(2).
Sets the socket option requested. Returns undefined if there is an error. OPTVAL may be specified as undef if you don't want to pass an argument.
Shifts the first value of the array off and returns it, shortening the
array by 1 and moving everything down. If there are no elements in the
array, returns the undefined value. If ARRAY is omitted, shifts the
@_
array within the lexical scope of subroutines and formats, and the
@ARGV
array at file scopes or within the lexical scopes established by the eval '', BEGIN {}
, END {}
, and INIT {}
constructs. See also unshift(), push(), and pop(). Shift()
and unshift() do the same thing to the left end of an array that pop() and push() do to the right end.
Calls the System V IPC function shmctl. You'll probably have to say
use IPC::SysV;
first to get the correct constant definitions. If CMD is IPC_STAT
, then ARG must be a variable which will hold the returned shmid_ds
structure. Returns like ioctl: the undefined value for error, ``0
but true'' for zero, or the actual return value otherwise. See also IPC::SysV
documentation.
Calls the System V IPC function shmget. Returns the shared memory segment
id, or the undefined value if there is an error. See also IPC::SysV
documentation.
Reads or writes the System V shared memory segment ID starting at position
POS for size SIZE by attaching to it, copying in/out, and detaching from
it. When reading, VAR must be a variable that will hold the data read. When
writing, if STRING is too long, only SIZE bytes are used; if STRING is too
short, nulls are written to fill out SIZE bytes. Return TRUE if successful,
or FALSE if there is an error. See also IPC::SysV
documentation and the IPC::Shareable
module from CPAN.
Shuts down a socket connection in the manner indicated by HOW, which has the same interpretation as in the system call of the same name.
shutdown(SOCKET, 0); # I/we have stopped reading data shutdown(SOCKET, 1); # I/we have stopped writing data shutdown(SOCKET, 2); # I/we have stopped using this socket
This is useful with sockets when you want to tell the other side you're done writing but not done reading, or vice versa. It's also a more insistent form of close because it also disables the filedescriptor in any forked copies in other processes.
Returns the sine of EXPR (expressed in radians). If EXPR is omitted,
returns sine of $_
.
For the inverse sine operation, you may use the POSIX::asin()
function, or use this relation:
sub asin { atan2($_[0], sqrt(1 - $_[0] * $_[0])) }
Causes the script to sleep for EXPR seconds, or forever if no EXPR. May be
interrupted if the process receives a signal such as SIGALRM
. Returns the number of seconds actually slept. You probably cannot mix alarm() and sleep() calls, because sleep() is often implemented using alarm().
On some older systems, it may sleep up to a full second less than what you requested, depending on how it counts seconds. Most modern systems always sleep the full amount. They may appear to sleep longer than that, however, because your process might not be scheduled right away in a busy multitasking system.
For delays of finer granularity than one second, you may use Perl's
syscall() interface to access setitimer(2)
if your system supports it,
or else see select above.
See also the POSIX module's sigpause()
function.
Opens a socket of the specified kind and attaches it to filehandle SOCKET.
DOMAIN, TYPE, and PROTOCOL are specified the same as for the system call of
the same name. You should ``use Socket;
'' first to get the proper definitions imported. See the examples in Sockets: Client/Server Communication.
Creates an unnamed pair of sockets in the specified domain, of the specified type. DOMAIN, TYPE, and PROTOCOL are specified the same as for the system call of the same name. If unimplemented, yields a fatal error. Returns TRUE if successful.
Some systems defined pipe() in terms of socketpair(), in which a call to pipe(Rdr, Wtr) is essentially:
use Socket; socketpair(Rdr, Wtr, AF_UNIX, SOCK_STREAM, PF_UNSPEC); shutdown(Rdr, 1); # no more writing for reader shutdown(Wtr, 0); # no more reading for writer
See the perlipc manpage for an example of socketpair use.
Sorts the LIST and returns the sorted list value. If SUBNAME or BLOCK is
omitted, sort()s in standard string comparison order. If SUBNAME is specified, it gives
the name of a subroutine that returns an integer less than, equal to, or
greater than 0
, depending on how the elements of the array are to be ordered. (The <=>
and cmp
operators are extremely useful in such routines.) SUBNAME may be a scalar
variable name (unsubscripted), in which case the value provides the name of
(or a reference to) the actual subroutine to use. In place of a SUBNAME,
you can provide a BLOCK as an anonymous, in-line sort subroutine.
In the interests of efficiency the normal calling code for subroutines is
bypassed, with the following effects: the subroutine may not be a recursive
subroutine, and the two elements to be compared are passed into the
subroutine not via @_
but as the package global variables $a
and
$b
(see example below). They are passed by reference, so don't modify $a
and $b
. And don't try to declare them as lexicals either.
You also cannot exit out of the sort block or subroutine using any of the loop control operators described in the perlsyn manpage or with goto().
When use locale
is in effect, sort LIST
sorts LIST according to the current collation locale. See the perllocale manpage.
Examples:
# sort lexically @articles = sort @files;
# same thing, but with explicit sort routine @articles = sort {$a cmp $b} @files;
# now case-insensitively @articles = sort {uc($a) cmp uc($b)} @files;
# same thing in reversed order @articles = sort {$b cmp $a} @files;
# sort numerically ascending @articles = sort {$a <=> $b} @files;
# sort numerically descending @articles = sort {$b <=> $a} @files;
# sort using explicit subroutine name sub byage { $age{$a} <=> $age{$b}; # presuming numeric } @sortedclass = sort byage @class;
# this sorts the %age hash by value instead of key # using an in-line function @eldest = sort { $age{$b} <=> $age{$a} } keys %age;
sub backwards { $b cmp $a; } @harry = ('dog','cat','x','Cain','Abel'); @george = ('gone','chased','yz','Punished','Axed'); print sort @harry; # prints AbelCaincatdogx print sort backwards @harry; # prints xdogcatCainAbel print sort @george, 'to', @harry; # prints AbelAxedCainPunishedcatchaseddoggonetoxyz
# inefficiently sort by descending numeric compare using # the first integer after the first = sign, or the # whole record case-insensitively otherwise
@new = sort { ($b =~ /=(\d+)/)[0] <=> ($a =~ /=(\d+)/)[0] || uc($a) cmp uc($b) } @old;
# same thing, but much more efficiently; # we'll build auxiliary indices instead # for speed @nums = @caps = (); for (@old) { push @nums, /=(\d+)/; push @caps, uc($_); }
@new = @old[ sort { $nums[$b] <=> $nums[$a] || $caps[$a] cmp $caps[$b] } 0..$#old ];
# same thing using a Schwartzian Transform (no temps) @new = map { $_->[0] } sort { $b->[1] <=> $a->[1] || $a->[2] cmp $b->[2] } map { [$_, /=(\d+)/, uc($_)] } @old;
If you're using strict, you MUST NOT declare $a
and $b
as lexicals. They are package globals. That means if you're in the main
package, it's
@articles = sort {$main::b <=> $main::a} @files;
or just
@articles = sort {$::b <=> $::a} @files;
but if you're in the FooPack
package, it's
@articles = sort {$FooPack::b <=> $FooPack::a} @files;
The comparison function is required to behave. If it returns inconsistent
results (sometimes saying $x[1]
is less than $x[2]
and sometimes saying the opposite, for example) the results are not
well-defined.
Removes the elements designated by OFFSET and LENGTH from an array, and
replaces them with the elements of LIST, if any. In list context, returns
the elements removed from the array. In scalar context, returns the last
element removed, or undef if no elements are removed. The array grows or shrinks as necessary. If
OFFSET is negative then it start that far from the end of the array. If
LENGTH is omitted, removes everything from OFFSET onward. If LENGTH is
negative, leave that many elements off the end of the array. The following
equivalences hold (assuming $[ == 0
):
push(@a,$x,$y) splice(@a,@a,0,$x,$y) pop(@a) splice(@a,-1) shift(@a) splice(@a,0,1) unshift(@a,$x,$y) splice(@a,0,0,$x,$y) $a[$x] = $y splice(@a,$x,1,$y)
Example, assuming array lengths are passed before arrays:
sub aeq { # compare two list values my(@a) = splice(@_,0,shift); my(@b) = splice(@_,0,shift); return 0 unless @a == @b; # same len? while (@a) { return 0 if pop(@a) ne pop(@b); } return 1; } if (&aeq($len,@foo[1..$len],0+@bar,@bar)) { ... }
Splits a string into an array of strings, and returns it. By default, empty leading fields are preserved, and empty trailing ones are deleted.
If not in list context, returns the number of fields found and splits into
the @_
array. (In list context, you can force the split into @_
by using ??
as the pattern delimiters, but it still returns the list value.) The use of
implicit split to @_
is deprecated, however, because it clobbers your subroutine arguments.
If EXPR is omitted, splits the $_
string. If PATTERN is also omitted, splits on whitespace (after skipping
any leading whitespace). Anything matching PATTERN is taken to be a
delimiter separating the fields. (Note that the delimiter may be longer
than one character.)
If LIMIT is specified and positive, splits into no more than that many fields (though it may split into fewer). If LIMIT is unspecified or zero, trailing null fields are stripped (which potential users of pop() would do well to remember). If LIMIT is negative, it is treated as if an arbitrarily large LIMIT had been specified.
A pattern matching the null string (not to be confused with a null pattern //
, which is just one member of the set of patterns matching a null string)
will split the value of EXPR into separate characters at each point it
matches that way. For example:
print join(':', split(/ */, 'hi there'));
produces the output 'h:i:t:h:e:r:e'.
The LIMIT parameter can be used to split a line partially
($login, $passwd, $remainder) = split(/:/, $_, 3);
When assigning to a list, if LIMIT is omitted, Perl supplies a LIMIT one larger than the number of variables in the list, to avoid unnecessary work. For the list above LIMIT would have been 4 by default. In time critical applications it behooves you not to split into more fields than you really need.
If the PATTERN contains parentheses, additional array elements are created from each matching substring in the delimiter.
split(/([,-])/, "1-10,20", 3);
produces the list value
(1, '-', 10, ',', 20)
If you had the entire header of a normal Unix email message in $header
, you could split it up into fields and their values this way:
$header =~ s/\n\s+/ /g; # fix continuation lines %hdrs = (UNIX_FROM => split /^(\S*?):\s*/m, $header);
The pattern /PATTERN/
may be replaced with an expression to specify patterns that vary at
runtime. (To do runtime compilation only once, use /$variable/o
.)
As a special case, specifying a PATTERN of space (' '
) will split on white space just as split() with no arguments does. Thus, split(' ') can be used to emulate awk's default behavior, whereas split(/ /)
will give you as many null initial fields as there are leading spaces. A split() on /\s+/ is like a split(' ') except that any leading whitespace produces a null first field. A split() with no arguments really does a split(' ', $_) internally.
Example:
open(PASSWD, '/etc/passwd'); while (<PASSWD>) { ($login, $passwd, $uid, $gid, $gcos, $home, $shell) = split(/:/); #... }
(Note that $shell
above will still have a newline on it. See chop,
chomp, and join.)
Returns a string formatted by the usual printf() conventions of the C library function sprintf(). See sprintf(3) or printf(3) on your system for an explanation of the general principles.
Perl does its own sprintf() formatting -- it emulates the C function sprintf(), but it doesn't use it (except for floating-point numbers, and even then only the standard modifiers are allowed). As a result, any non-standard extensions in your local sprintf() are not available from Perl.
Perl's sprintf() permits the following universally-known conversions:
%% a percent sign %c a character with the given number %s a string %d a signed integer, in decimal %u an unsigned integer, in decimal %o an unsigned integer, in octal %x an unsigned integer, in hexadecimal %e a floating-point number, in scientific notation %f a floating-point number, in fixed decimal notation %g a floating-point number, in %e or %f notation
In addition, Perl permits the following widely-supported conversions:
%X like %x, but using upper-case letters %E like %e, but using an upper-case "E" %G like %g, but with an upper-case "E" (if applicable) %p a pointer (outputs the Perl value's address in hexadecimal) %n special: *stores* the number of characters output so far into the next variable in the parameter list
Finally, for backward (and we do mean ``backward'') compatibility, Perl permits these unnecessary but widely-supported conversions:
%i a synonym for %d %D a synonym for %ld %U a synonym for %lu %O a synonym for %lo %F a synonym for %f
Perl permits the following universally-known flags between the %
and the conversion letter:
space prefix positive number with a space + prefix positive number with a plus sign - left-justify within the field 0 use zeros, not spaces, to right-justify # prefix non-zero octal with "0", non-zero hex with "0x" number minimum field width .number "precision": digits after decimal point for floating-point, max length for string, minimum length for integer l interpret integer as C type "long" or "unsigned long" h interpret integer as C type "short" or "unsigned short"
There is also one Perl-specific flag:
V interpret integer as Perl's standard integer type
Where a number would appear in the flags, an asterisk (``*
'') may be used instead, in which case Perl uses the next item in the
parameter list as the given number (that is, as the field width or
precision). If a field width obtained through ``*
'' is negative, it has the same effect as the ``-
'' flag: left-justification.
If use locale
is in effect, the character used for the decimal point in formatted real
numbers is affected by the LC_NUMERIC locale. See the perllocale manpage.
Return the square root of EXPR. If EXPR is omitted, returns square root of $_
. Only works on non-negative operands, unless you've loaded the standard
Math::Complex module.
use Math::Complex; print sqrt(-2); # prints 1.4142135623731i
Sets the random number seed for the rand() operator. If EXPR is omitted, uses a semi-random value supplied by the kernel (if it supports the /dev/urandom device) or based on the current time and process ID, among other things. In versions of Perl prior to 5.004 the default seed was just the current time(). This isn't a particularly good seed, so many old programs supply their own seed value (often time ^ $$ or time ^ ($$ + ($$ << 15))), but that isn't necessary any more.
In fact, it's usually not necessary to call srand() at all, because if it is not called explicitly, it is called implicitly at the first use of the rand() operator. However, this was not the case in version of Perl before 5.004, so if your script will run under older Perl versions, it should call srand().
Note that you need something much more random than the default seed for cryptographic purposes. Checksumming the compressed output of one or more rapidly changing operating system status programs is the usual method. For example:
srand (time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
If you're particularly concerned with this, see the Math::TrulyRandom
module in CPAN.
Do not call srand() multiple times in your program unless you know exactly what you're doing and why you're doing it. The point of the function is to ``seed'' the rand() function so that rand() can produce a different sequence each time you run your program. Just do it once at the top of your program, or you won't get random numbers out of rand()!
Frequently called programs (like CGI scripts) that simply use
time ^ $$
for a seed can fall prey to the mathematical property that
a^b == (a+1)^(b+1)
one-third of the time. So don't do that.
Returns a 13-element list giving the status info for a file, either the
file opened via FILEHANDLE, or named by EXPR. If EXPR is omitted, it stats $_
. Returns a null list if the stat fails. Typically used as follows:
($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size, $atime,$mtime,$ctime,$blksize,$blocks) = stat($filename);
Not all fields are supported on all filesystem types. Here are the meaning of the fields:
0 dev device number of filesystem 1 ino inode number 2 mode file mode (type and permissions) 3 nlink number of (hard) links to the file 4 uid numeric user ID of file's owner 5 gid numeric group ID of file's owner 6 rdev the device identifier (special files only) 7 size total size of file, in bytes 8 atime last access time since the epoch 9 mtime last modify time since the epoch 10 ctime inode change time (NOT creation time!) since the epoch 11 blksize preferred block size for file system I/O 12 blocks actual number of blocks allocated
(The epoch was at 00:00 January 1, 1970 GMT.)
If stat is passed the special filehandle consisting of an underline, no stat is done, but the current contents of the stat structure from the last stat or filetest are returned. Example:
if (-x $file && (($d) = stat(_)) && $d < 0) { print "$file is executable NFS file\n"; }
(This works on machines only for which the device number is negative under NFS.)
Because the mode contains both the file type and its permissions, you
should mask off the file type portion and (s)printf using a "%o"
if you want to see the real permissions.
$mode = (stat($filename))[2]; printf "Permissions are %04o\n", $mode & 07777;
In scalar context, stat() returns a boolean value indicating success or failure, and, if successful,
sets the information associated with the special filehandle _
.
The File::stat module provides a convenient, by-name access mechanism:
use File::stat; $sb = stat($filename); printf "File is %s, size is %s, perm %04o, mtime %s\n", $filename, $sb->size, $sb->mode & 07777, scalar localtime $sb->mtime;
Takes extra time to study SCALAR ($_
if unspecified) in anticipation of doing many pattern matches on the string
before it is next modified. This may or may not save time, depending on the
nature and number of patterns you are searching on, and on the distribution
of character frequencies in the string to be searched -- you probably want
to compare run times with and without it to see which runs faster. Those
loops which scan for many short constant strings (including the constant
parts of more complex patterns) will benefit most. You may have only one study() active at a time -- if you study a different scalar the first is
``unstudied''. (The way study() works is this: a linked list of every character in the string to be
searched is made, so we know, for example, where all the 'k'
characters are. From each search string, the rarest character is selected,
based on some static frequency tables constructed from some C programs and
English text. Only those places that contain this ``rarest'' character are
examined.)
For example, here is a loop that inserts index producing entries before any line containing a certain pattern:
while (<>) { study; print ".IX foo\n" if /\bfoo\b/; print ".IX bar\n" if /\bbar\b/; print ".IX blurfl\n" if /\bblurfl\b/; # ... print; }
In searching for /\bfoo\b/
, only those locations in $_
that contain "f"
will be looked at, because "f"
is rarer than "o"
. In general, this is a big win except in pathological cases. The only
question is whether it saves you more time than it took to build the linked
list in the first place.
Note that if you have to look for strings that you don't know till runtime,
you can build an entire loop as a string and eval() that to avoid recompiling all your patterns all the time. Together with
undefining $/
to input entire files as one record, this can be very fast, often faster
than specialized programs like fgrep(1).
The following scans a
list of files (@files
) for a list of words (@words
), and prints out the names of those files that contain a match:
$search = 'while (<>) { study;'; foreach $word (@words) { $search .= "++\$seen{\$ARGV} if /\\b$word\\b/;\n"; } $search .= "}"; @ARGV = @files; undef $/; eval $search; # this screams $/ = "\n"; # put back to normal input delimiter foreach $file (sort keys(%seen)) { print $file, "\n"; }
This is subroutine definition, not a real function per se. With just a NAME (and possibly prototypes), it's just a forward declaration. Without a NAME, it's an anonymous function declaration, and does actually return a value: the CODE ref of the closure you just created. See the perlsub manpage and the perlref manpage for details.
Extracts a substring out of EXPR and returns it. First character is at
offset 0
, or whatever you've set $[
to (but don't do that). If OFFSET is negative (or more precisely, less than $[
), starts that far from the end of the string. If LEN is omitted, returns
everything to the end of the string. If LEN is negative, leaves that many
characters off the end of the string.
If you specify a substring that is partly outside the string, the part within the string is returned. If the substring is totally outside the string a warning is produced.
You can use the substr()
function as an lvalue, in which case
EXPR must itself be an lvalue. If you assign something shorter than LEN,
the string will shrink, and if you assign something longer than LEN, the
string will grow to accommodate it. To keep the string the same length you
may need to pad or chop your value using sprintf().
An alternative to using substr()
as an lvalue is to specify
the replacement string as the 4th argument. This allows you to replace
parts of the EXPR and return what was there before in one operation, just
as you can with splice().
Creates a new filename symbolically linked to the old filename. Returns 1
for success, 0
otherwise. On systems that don't support symbolic links, produces a fatal
error at run time. To check for that, use eval:
$symlink_exists = eval { symlink("",""); 1 };
Calls the system call specified as the first element of the list, passing
the remaining elements as arguments to the system call. If unimplemented,
produces a fatal error. The arguments are interpreted as follows: if a
given argument is numeric, the argument is passed as an int. If not, the
pointer to the string value is passed. You are responsible to make sure a
string is pre-extended long enough to receive any result that might be
written into a string. You can't use a string literal (or other read-only
string) as an argument to syscall()
because Perl has to assume that any string pointer might be written
through. If your integer arguments are not literals and have never been
interpreted in a numeric context, you may need to add 0
to them to force them to look like numbers. This emulates the syswrite() function (or vice versa):
require 'syscall.ph'; # may need to run h2ph $s = "hi there\n"; syscall(&SYS_write, fileno(STDOUT), $s, length $s);
Note that Perl supports passing of up to only 14 arguments to your system call, which in practice should usually suffice.
Syscall returns whatever value returned by the system call it calls. If the
system call fails, syscall() returns -1
and sets $!
(errno). Note that some system calls can legitimately return -1
. The proper way to handle such calls is to assign $!=0;
before the call and check the value of $!
if syscall returns -1
.
There's a problem with syscall(&SYS_pipe): it returns the file number of the read end of the pipe it creates. There is no way to retrieve the file number of the other end. You can avoid this problem by using pipe() instead.
Opens the file whose filename is given by FILENAME, and associates it with FILEHANDLE. If FILEHANDLE is an expression, its value is used as the name of the real filehandle wanted. This function calls the underlying operating system's open() function with the parameters FILENAME, MODE, PERMS.
The possible values and flag bits of the MODE parameter are
system-dependent; they are available via the standard module Fcntl
. For historical reasons, some values work on almost every system supported
by perl: zero means read-only, one means write-only, and two means
read/write. We know that these values do not work under OS/390 & VM/ESA Unix and on the Macintosh; you probably
don't want to use them in new code.
If the file named by FILENAME does not exist and the open() call creates it (typically because MODE includes the O_CREAT
flag), then the value of PERMS specifies the permissions of the newly
created file. If you omit the PERMS argument to sysopen(), Perl uses the octal value 0666
. These permission values need to be in octal, and are modified by your
process's current umask.
You should seldom if ever use 0644
as argument to sysopen(), because that takes away the user's option to have a more permissive
umask. Better to omit it. See the perlfunc(1)
entry on umask for more on this.
See the perlopentut manpage for a kinder, gentler explanation of opening files.
Attempts to read LENGTH bytes of data into variable SCALAR from the
specified FILEHANDLE, using the system call read(2).
It
bypasses stdio, so mixing this with other kinds of reads, print(), write(),
seek(), tell(), or eof() can cause confusion because stdio usually buffers data. Returns the number
of bytes actually read, 0
at end of file, or undef if there was an error. SCALAR will be grown or
shrunk so that the last byte actually read is the last byte of the scalar
after the read.
An OFFSET may be specified to place the read data at some place in the
string other than the beginning. A negative OFFSET specifies placement at
that many bytes counting backwards from the end of the string. A positive
OFFSET greater than the length of SCALAR results in the string being padded
to the required size with "\0"
bytes before the result of the read is appended.
There is no syseof()
function, which is ok, since
eof()
doesn't work very well on device files (like ttys)
anyway. Use sysread()
and check for a return value for 0 to
decide whether you're done.
Sets FILEHANDLE's system position using the system call
lseek(2).
It bypasses stdio, so mixing this with reads (other
than sysread()),
print(), write(), seek(), tell(), or eof() may cause confusion. FILEHANDLE may be an expression whose value gives the
name of the filehandle. The values for WHENCE are 0
to set the new position to POSITION, 1
to set the it to the current position plus POSITION, and 2
to set it to EOF plus POSITION (typically negative). For WHENCE, you may
use the constants SEEK_SET
, SEEK_CUR
, and
SEEK_END
from either the IO::Seekable
or the POSIX module.
Returns the new position, or the undefined value on failure. A position of
zero is returned as the string ``0
but true''; thus sysseek() returns TRUE on success and FALSE on failure, yet you can still easily
determine the new position.
Does exactly the same thing as ``exec LIST
'', except that a fork is done first, and the parent process waits for the
child process to complete. Note that argument processing varies depending
on the number of arguments. If there is more than one argument in LIST, or
if LIST is an array with more than one value, starts the program given by
the first element of the list with arguments given by the rest of the list.
If there is only one scalar argument, the argument is checked for shell
metacharacters, and if there are any, the entire argument is passed to the
system's command shell for parsing (this is
/bin/sh -c
on Unix platforms, but varies on other platforms). If there are no shell
metacharacters in the argument, it is split into words and passed directly
to execvp()
, which is more efficient.
The return value is the exit status of the program as returned by the wait() call. To get the actual exit value divide by 256. See also exec. This is NOT what you want to use to capture the output from a command, for that you should use merely backticks or qx//, as described in `STRING`.
Like exec(), system() allows you to lie to a program about its name if you use the ``system PROGRAM LIST
'' syntax. Again, see exec.
Because system() and backticks block SIGINT
and SIGQUIT
, killing the program they're running doesn't actually interrupt your
program.
@args = ("command", "arg1", "arg2"); system(@args) == 0 or die "system @args failed: $?"
You can check all the failure possibilities by inspecting
$?
like this:
$exit_value = $? >> 8; $signal_num = $? & 127; $dumped_core = $? & 128;
When the arguments get executed via the system shell, results and return codes will be subject to its quirks and capabilities. See `STRING` and exec for details.
Attempts to write LENGTH bytes of data from variable SCALAR to the
specified FILEHANDLE, using the system call write(2).
If
LENGTH is not specified, writes whole SCALAR. It bypasses stdio, so mixing
this with reads (other than sysread()), print(),
write(), seek(), tell(), or eof() may cause confusion because stdio usually buffers data. Returns the number
of bytes actually written, or undef if there was an error. If the LENGTH is greater than the available data in
the SCALAR after the OFFSET, only as much data as is available will be
written.
An OFFSET may be specified to write the data from some part of the string other than the beginning. A negative OFFSET specifies writing that many bytes counting backwards from the end of the string. In the case the SCALAR is empty you can use OFFSET but only zero offset.
Returns the current position for FILEHANDLE. FILEHANDLE may be an expression whose value gives the name of the actual filehandle. If FILEHANDLE is omitted, assumes the file last read.
There is no systell()
function. Use sysseek(FH, 0, 1) for that.
Returns the current position of the readdir() routines on DIRHANDLE. Value may be given to seekdir() to access a particular location in a directory. Has the same caveats about possible directory compaction as the corresponding system library routine.
This function binds a variable to a package class that will provide the
implementation for the variable. VARIABLE is the name of the variable to be
enchanted. CLASSNAME is the name of a class implementing objects of correct
type. Any additional arguments are passed to the ``new()
'' method of the class (meaning TIESCALAR
, TIEHANDLE
, TIEARRAY
, or TIEHASH
). Typically these are arguments such as might be passed to the dbm_open()
function of C. The object returned by the ``new()
'' method is also returned by the tie() function, which would be useful if you want to access other methods in
CLASSNAME.
Note that functions such as keys() and values() may return huge lists when used on large objects, like DBM files. You may prefer to use the each() function to iterate over such. Example:
# print out history file offsets use NDBM_File; tie(%HIST, 'NDBM_File', '/usr/lib/news/history', 1, 0); while (($key,$val) = each %HIST) { print $key, ' = ', unpack('L',$val), "\n"; } untie(%HIST);
A class implementing a hash should have the following methods:
TIEHASH classname, LIST FETCH this, key STORE this, key, value DELETE this, key CLEAR this EXISTS this, key FIRSTKEY this NEXTKEY this, lastkey DESTROY this
A class implementing an ordinary array should have the following methods:
TIEARRAY classname, LIST FETCH this, key STORE this, key, value FETCHSIZE this STORESIZE this, count CLEAR this PUSH this, LIST POP this SHIFT this UNSHIFT this, LIST SPLICE this, offset, length, LIST EXTEND this, count DESTROY this
A class implementing a file handle should have the following methods:
TIEHANDLE classname, LIST READ this, scalar, length, offset READLINE this GETC this WRITE this, scalar, length, offset PRINT this, LIST PRINTF this, format, LIST CLOSE this DESTROY this
A class implementing a scalar should have the following methods:
TIESCALAR classname, LIST FETCH this, STORE this, value DESTROY this
Not all methods indicated above need be implemented. See the perltie manpage, Tie::Hash, Tie::Array, Tie::Scalar, and Tie::Handle.
Unlike dbmopen(), the tie() function will not use or require a module for you--you need to do that explicitly yourself. See the DB_File manpage or the Config module for interesting tie() implementations.
For further details see the perltie manpage, tied VARIABLE.
Returns a reference to the object underlying VARIABLE (the same value that was originally returned by the tie() call that bound the variable to a package.) Returns the undefined value if VARIABLE isn't tied to a package.
Returns the number of non-leap seconds since whatever time the system considers to be the epoch (that's 00:00:00, January 1, 1904 for MacOS, and 00:00:00 UTC, January 1, 1970 for most other systems). Suitable for feeding to gmtime() and localtime().
Returns a four-element list giving the user and system times, in seconds, for this process and the children of this process.
($user,$system,$cuser,$csystem) = times;
The transliteration operator. Same as y///. See the perlop manpage.
Truncates the file opened on FILEHANDLE, or named by EXPR, to the specified length. Produces a fatal error if truncate isn't implemented on your system. Returns TRUE if successful, the undefined value otherwise.
Returns an uppercased version of EXPR. This is the internal function
implementing the \U
escape in double-quoted strings. Respects current LC_CTYPE locale if use locale
in force. See the perllocale manpage. (It does not attempt to do titlecase mapping on initial letters. See ucfirst() for that.)
If EXPR is omitted, uses $_
.
Returns the value of EXPR with the first character in uppercase. This is
the internal function implementing the \u
escape in double-quoted strings. Respects current LC_CTYPE locale if use locale
in force. See the perllocale manpage.
If EXPR is omitted, uses $_
.
Sets the umask for the process to EXPR and returns the previous value. If EXPR is omitted, merely returns the current umask.
The Unix permission rwxr-x---
is represented as three sets of three bits, or three octal digits: 0750
(the leading 0 indicates octal and isn't one of the digits). The umask value is such a number representing disabled permissions bits. The
permission (or ``mode'') values you pass mkdir or sysopen are modified by your umask, so even if you tell sysopen to create a file with permissions 0777
, if your umask is 0022
then the file will actually be created with permissions 0755
. If your umask were 0027
(group can't write; others can't read, write, or execute), then passing
sysopen() 0666
would create a file with mode 0640
(0666 &~
027
is 0640
).
Here's some advice: supply a creation mode of 0666
for regular files (in sysopen()) and one of 0777
for directories (in
mkdir()) and executable files. This gives users the freedom of choice: if they
want protected files, they might choose process umasks of 022
, 027
, or even the particularly antisocial mask of 077
. Programs should rarely if ever make policy decisions better left to the
user. The exception to this is when writing files that should be kept
private: mail files, web browser cookies, .rhosts files, and so on.
If umask(2)
is not implemented on your system and you are
trying to restrict access for yourself (i.e., (EXPR & 0700) > 0), produces a fatal error at run time. If
umask(2)
is not implemented and you are not trying to restrict
access for yourself, returns undef.
Remember that a umask is a number, usually given in octal; it is not a string of octal digits. See also oct, if all you have is a string.
Undefines the value of EXPR, which must be an lvalue. Use only on a scalar
value, an array (using ``@
''), a hash (using ``%
''), a subroutine (using ``&
''), or a typeglob (using ``<*>''). (Saying undef $hash{$key}
will probably not do what you expect on most predefined variables or DBM
list values, so don't do that; see delete.) Always returns the undefined value. You can omit the EXPR, in which case
nothing is undefined, but you still get an undefined value that you could,
for instance, return from a subroutine, assign to a variable or pass as a
parameter. Examples:
undef $foo; undef $bar{'blurfl'}; # Compare to: delete $bar{'blurfl'}; undef @ary; undef %hash; undef &mysub; undef *xyz; # destroys $xyz, @xyz, %xyz, &xyz, etc. return (wantarray ? (undef, $errmsg) : undef) if $they_blew_it; select undef, undef, undef, 0.25; ($a, $b, undef, $c) = &foo; # Ignore third value returned
Note that this is a unary operator, not a list operator.
Deletes a list of files. Returns the number of files successfully deleted.
$cnt = unlink 'a', 'b', 'c'; unlink @goners; unlink <*.bak>;
Note: unlink() will not delete directories unless you are superuser and the -U flag is supplied to Perl. Even if these conditions are met, be warned that unlinking a directory can inflict damage on your filesystem. Use rmdir() instead.
If LIST is omitted, uses $_
.
Unpack()
does the reverse of pack(): it takes a string representing a structure and expands it out into a list
value, returning the array value. (In scalar context, it returns merely the
first value produced.) The TEMPLATE has the same format as in the pack() function. Here's a subroutine that does substring:
sub substr { my($what,$where,$howmuch) = @_; unpack("x$where a$howmuch", $what); }
and then there's
sub ordinal { unpack("c",$_[0]); } # same as ord()
In addition, you may prefix a field with a %<number> to indicate that you want a <number>-bit checksum of the items instead of the items themselves. Default is a 16-bit checksum. For example, the following computes the same number as the System V sum program:
while (<>) { $checksum += unpack("%32C*", $_); } $checksum %= 65535;
The following efficiently counts the number of set bits in a bit vector:
$setbits = unpack("%32b*", $selectmask);
See pack for more examples.
Breaks the binding between a variable and a package. (See tie().)
Does the opposite of a shift(). Or the opposite of a push(), depending on how you look at it. Prepends list to the front of the array, and returns the new number of elements in the array.
unshift(ARGV, '-e') unless $ARGV[0] =~ /^-/;
Note the LIST is prepended whole, not one element at a time, so the prepended elements stay in the same order. Use reverse() to do the reverse.
Imports some semantics into the current package from the named module, generally by aliasing certain subroutine or variable names into your package. It is exactly equivalent to
BEGIN { require Module; import Module LIST; }
except that Module must be a bareword.
If the first argument to use is a number, it is treated as a version number instead of a module name. If the version of the Perl interpreter is less than VERSION, then an error message is printed and Perl exits immediately. This is often useful if you need to check the current Perl version before useing library modules that have changed in incompatible ways from older versions of Perl. (We try not to do this more than we have to.)
The BEGIN
forces the require and import() to happen at compile time. The
require makes sure the module is loaded into memory if it hasn't been yet. The import() is not a builtin--it's just an ordinary static method call into the ``Module
'' package to tell the module to import the list of features back into the
current package. The module can implement its
import() method any way it likes, though most modules just choose to derive their import() method via inheritance from the Exporter
class that is defined in the Exporter
module. See the Exporter manpage. If no import()
method can be found then the error is currently silently ignored. This may
change to a fatal error in a future version.
If you don't want your namespace altered, explicitly supply an empty list:
use Module ();
That is exactly equivalent to
BEGIN { require Module }
If the VERSION argument is present between Module and LIST, then the
use will call the VERSION method in class Module with the given version as an
argument. The default VERSION method, inherited from the Universal class,
croaks if the given version is larger than the value of the variable $Module::VERSION
. (Note that there is not a comma after VERSION!)
Because this is a wide-open interface, pragmas (compiler directives) are also implemented this way. Currently implemented pragmas are:
use integer; use diagnostics; use sigtrap qw(SEGV BUS); use strict qw(subs vars refs); use subs qw(afunc blurfl);
Some of these these pseudo-modules import semantics into the current block
scope (like strict
or integer
, unlike ordinary modules, which import symbols into the current package
(which are effective through the end of the file).
There's a corresponding ``no'' command that unimports meanings imported by use, i.e., it calls unimport Module LIST
instead of import().
no integer; no strict 'refs';
If no unimport()
method can be found the call fails with a fatal error.
See the perlmod manpage for a list of standard modules and pragmas.
Changes the access and modification times on each file of a list of files.
The first two elements of the list must be the NUMERICAL access and
modification times, in that order. Returns the number of files successfully
changed. The inode modification time of each file is set to the current
time. This code has the same effect as the ``touch
'' command if the files already exist:
#!/usr/bin/perl $now = time; utime $now, $now, @ARGV;
Returns a list consisting of all the values of the named hash. (In a scalar context, returns the number of values.) The values are returned in an apparently random order. The actual random order is subject to change in future versions of perl, but it is guaranteed to be the same order as either the keys() or each() function would produce on the same (unmodified) hash.
Note that you cannot modify the values of a hash this way, because the
returned list is just a copy. You need to use a hash slice for that, since
it's lvaluable in a way that values()
is not.
for (values %hash) { s/foo/bar/g } # FAILS! for (@hash{keys %hash}) { s/foo/bar/g } # ok
As a side effect, calling values()
resets the HASH's internal
iterator. See also keys(), each(), and sort().
Treats the string in EXPR as a vector of unsigned integers, and returns the value of the bit field specified by OFFSET. BITS specifies the number of bits that are reserved for each entry in the bit vector. This must be a power of two from 1 to 32. vec() may also be assigned to, in which case parentheses are needed to give the expression the correct precedence as in
vec($image, $max_x * $x + $y, 8) = 3;
Vectors created with vec() can also be manipulated with the logical operators |
, &
, and ^
, which will assume a bit vector operation is desired when both operands
are strings. See Bitwise String Operators.
The following code will build up an ASCII string saying 'PerlPerlPerl'
. The comments show the string after each step. Note that this code works
in the same way on big-endian or little-endian machines.
my $foo = ''; vec($foo, 0, 32) = 0x5065726C; # 'Perl' vec($foo, 2, 16) = 0x5065; # 'PerlPe' vec($foo, 3, 16) = 0x726C; # 'PerlPerl' vec($foo, 8, 8) = 0x50; # 'PerlPerlP' vec($foo, 9, 8) = 0x65; # 'PerlPerlPe' vec($foo, 20, 4) = 2; # 'PerlPerlPe' . "\x02" vec($foo, 21, 4) = 7; # 'PerlPerlPer' # 'r' is "\x72" vec($foo, 45, 2) = 3; # 'PerlPerlPer' . "\x0c" vec($foo, 93, 1) = 1; # 'PerlPerlPer' . "\x2c" vec($foo, 94, 1) = 1; # 'PerlPerlPerl' # 'l' is "\x6c"
To transform a bit vector into a string or array of 0's and 1's, use these:
$bits = unpack("b*", $vector); @bits = split(//, unpack("b*", $vector));
If you know the exact length in bits, it can be used in place of the *
.
Behaves like the wait(2)
system call on your system: it waits
for a child process to terminate and returns the pid of the deceased
process, or
-1
if there are no child processes. The status is rketurned in $?
. Note that a return value of -1
could mean that child processes are being automatically reaped, as
described in the perlipc manpage.
Waits for a particular child process to terminate and returns the pid of
the deceased process, or -1
if there is no such child process. On some systems, a value of 0 indicates
that there are processes still running. The status is returned in $?
. If you say
use POSIX ":sys_wait_h"; #... do { $kid = waitpid(-1,&WNOHANG); } until $kid == -1;
then you can do a non-blocking wait for all pending zombie processes.
Non-blocking wait is available on machines supporting either the
waitpid(2)
or wait4(2)
system calls. However,
waiting for a particular pid with FLAGS of 0
is implemented everywhere. (Perl emulates the system call by remembering
the status values of processes that have exited but have not been harvested
by the Perl script yet.)
Note that on some systems, a return value of -1
could mean that child processes are being automatically reaped. See the perlipc manpage for details, and for other examples.
Returns TRUE if the context of the currently executing subroutine is looking for a list value. Returns FALSE if the context is looking for a scalar. Returns the undefined value if the context is looking for no value (void context).
return unless defined wantarray; # don't bother doing more my @a = complex_calculation(); return wantarray ? @a : "@a";
Produces a message on STDERR just like die(), but doesn't exit or throw an exception.
If LIST is empty and $@
already contains a value (typically from a previous eval) that value is
used after appending "\t...caught"
to $@
. This is useful for staying almost, but not entirely similar to
die().
If $@
is empty then the string "Warning: Something's wrong"
is used.
No message is printed if there is a $SIG{__WARN__}
handler installed. It is the handler's responsibility to deal with the
message as it sees fit (like, for instance, converting it into a die()). Most handlers must therefore make arrangements to actually display the
warnings that they are not prepared to deal with, by calling warn()
again in the handler. Note that this is quite safe and will not produce an
endless loop, since __WARN__
hooks are not called from inside one.
You will find this behavior is slightly different from that of
$SIG{__DIE__}
handlers (which don't suppress the error text, but can instead call die() again to change it).
Using a __WARN__
handler provides a powerful way to silence all warnings (even the so-called
mandatory ones). An example:
# wipe out *all* compile-time warnings BEGIN { $SIG{'__WARN__'} = sub { warn $_[0] if $DOWARN } } my $foo = 10; my $foo = 20; # no warning about duplicate my $foo, # but hey, you asked for it! # no compile-time or run-time warnings before here $DOWARN = 1;
# run-time warnings enabled after here warn "\$foo is alive and $foo!"; # does show up
See the perlvar manpage for details on setting %SIG
entries, and for more examples. See the Carp module for other kinds of
warnings using its carp()
and cluck()
functions.
Writes a formatted record (possibly multi-line) to the specified
FILEHANDLE, using the format associated with that file. By default the
format for a file is the one having the same name as the filehandle, but
the format for the current output channel (see the select() function) may be set explicitly by assigning the name of the format to the $~
variable.
Top of form processing is handled automatically: if there is insufficient
room on the current page for the formatted record, the page is advanced by
writing a form feed, a special top-of-page format is used to format the new
page header, and then the record is written. By default the top-of-page
format is the name of the filehandle with ``_TOP'' appended, but it may be
dynamically set to the format of your choice by assigning the name to the $^
variable while the filehandle is selected. The number of lines remaining on
the current page is in variable $-
, which can be set to 0
to force a new page.
If FILEHANDLE is unspecified, output goes to the current default output channel, which starts out as STDOUT but may be changed by the select() operator. If the FILEHANDLE is an EXPR, then the expression is evaluated and the resulting string is used to look up the name of the FILEHANDLE at run time. For more on formats, see the perlform manpage.
Note that write is NOT the opposite of read(). Unfortunately.
The transliteration operator. Same as tr///. See the perlop manpage.