The following information is also available:
Time column is TIME ORDERED-> Fetching fa940728_0101.0335.Z
ATTITUDE_V0.9j
reading attitude file:./merged.tmp
open asc output file:out.tmp
AVERAGE ASPECT AND OFFSET FOR THIS ATTITUDE FILE:
Attitude file start and stop ascatime : 49510887.952400 49520247.922000
Data file start and stop ascatime : 49510887.952400 49520247.922000
Aspecting run start and stop ascatime : 49510887.952517 49520247.921905
Time interval averaged over (seconds) : 9359.969388
Total pointing and manuver time (sec) : 5008.985352 4350.988770
Mean boresight Euler angles : 350.640684 31.498244 53.082478
RA DEC SUN ANGLE
Mean solar position (deg) : 126.16 19.29
Mean aberration (arcsec) : 25.08 -10.50
Mean sat X-axis (deg) : 47.997051 -18.290243 85.40
Mean sat Y-axis (deg) : 129.256494 24.690550 6.11
Mean sat Z-axis (deg) : 350.640684 58.501759 94.02
RA DEC ROLL OFFSET
(deg) (deg) (deg) (arcmin)
Average 350.727905 58.782364 323.007202 0.037312
Minimum 350.688293 58.781448 323.002380 0.000000
Maximum 350.729919 58.793327 323.074768 4.045215
Sigma (RMS) 0.000655 0.000154 0.001657 0.049420
Number of ASPECT records processed = 10923
Aspecting to RA/DEC : 350.72790527 58.78236389
closing output file...
closing attitude file...
-> Standard Output From STOOL checkatt:
Opening file: ./out.tmp
***************** Observation Info ******************
RA (J2000 deg): 350.728 DEC: 58.782
START TIME: SC 49510887.9525 = UT 28/07/94 01:01:27
****** Definition of Attitude SENSOR Bit Flags ******
Sensors used in the attitude determination and attitude control mode
1: USED, 0: NOT USED
B0:STT-A, B1:STT-B, B2:NSAS, B3:GAS, B4:SSAS-SA, B5:SSAS-SB,
B6:IRU-X, B7:IRU-Y, B8:IRU-Z, B9:IRU-S1, B10:IRU-S2,
B11: Attitude control mode 1: coarse, 0: fine
B12: Sun presence 1: day, 0: night
B13: STT-A earth occultation 1: earth occultation, 0: no occultation
B14: STT-B earth occultation 1: earth occultation, 0: no occultation
B16,17,18: STT-A track stars no.1,2,3, 1: USED, 0: NOT USED
B19,20,21: STT-B track stars no.1,2,3, 1: USED, 0: NOT USED
B22,23: always 0
******** Attitude File Reconstruction Summary *******
S S N G S S I I I I I A S S S S S
T T S A S S R R R R R C U T T T T
T T A S A A U U U U U M N T T T T
- - S . A A - - - - - . . - - - -
A B . . - - X Y Z S S . . A B A B
. . . . S S . . . 1 2 . . O O S S
offset_time separation sensor . . . . A B . . . . . . . C C T T
(sec) (arcmin) . . . . . . . . . . . . . C C R R
BIT: 0 1 2 3 4 5 6 7 8 9 A B C D E
16.000111 1.251 2603 1 1 0 0 0 0 0 0 0 1 1 0 0 1 0 0 0
271.999298 0.227 2603 1 1 0 0 0 0 0 0 0 1 1 0 0 1 0 0 0
1925.993774 0.050 2A03 1 1 0 0 0 0 0 0 0 1 0 1 0 1 0 0 0
4143.986816 0.017 1C2443 1 1 0 0 0 0 1 0 0 0 1 0 0 1 0 4 3
7819.974121 0.026 2A03 1 1 0 0 0 0 0 0 0 1 0 1 0 1 0 0 0
9359.969727 4.045 DC28C3 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 4 3
Attitude Records: 10923
Attitude Steps: 6
Maneuver ACM time: 4351.00 sec
Pointed ACM time: 5009.00 sec
-> Calculating aspect point95 106 count=1 sum1=350.563 sum2=31.552 sum3=53.149 100 100 count=4 sum1=1402.45 sum2=125.964 sum3=212.422 101 100 count=5 sum1=1753.12 sum2=157.469 sum3=265.483 102 100 count=30 sum1=10519.1 sum2=944.92 sum3=1592.6 103 100 count=10882 sum1=3.81567e+06 sum2=342767 sum3=577635 0 out of 10922 points outside bin structure-> Euler angles: 350.641, 31.4985, 53.0817
Interpolating 6 records in time interval 4.95201e+07 - 4.95202e+07
frf_directory,s,h,"./",,,"frf directory" frf_file,s,h,"ft940728_0101.0335",,,"frf telemetry file"-> Standard Output From FTOOL frfread:
Frfread version 3.00 patch 32 ASCA format Telemetry file: ft940728_0101.0335 Initial mode = 1 (Faint) Initial value for dummy = 0 Initial datamode = 0 (Observation) Initial sis = 0 Initial bit_rate = 1 Reading all superframes reading PH mode reading PCAL mode reading MPCmode No mode = 0 Faint = 174976 Bright = 0 Fast = 0 Frame = 0 Dark frame = 0 Histogram = 0 Integration = 0 PH = 174976 MPC = 0 PCAL = 0 Memory Check = 0 Number of superframes = 2761 no. of SIS events found = 658897-> Removing the following files with NEVENTS=0
ft940728_0101_0335G200870H.fits ft940728_0101_0335G200970H.fits ft940728_0101_0335G201070L.fits ft940728_0101_0335G201170L.fits ft940728_0101_0335G201270H.fits ft940728_0101_0335G201370H.fits ft940728_0101_0335G201470H.fits ft940728_0101_0335G201570H.fits ft940728_0101_0335G201670H.fits ft940728_0101_0335G202370H.fits ft940728_0101_0335G202670H.fits ft940728_0101_0335G202770H.fits ft940728_0101_0335G202870L.fits ft940728_0101_0335G300670H.fits ft940728_0101_0335G300770H.fits ft940728_0101_0335G300870L.fits ft940728_0101_0335G300970L.fits ft940728_0101_0335G301070H.fits ft940728_0101_0335G301170H.fits ft940728_0101_0335G301270H.fits ft940728_0101_0335G301370H.fits ft940728_0101_0335G302070H.fits ft940728_0101_0335G302270H.fits ft940728_0101_0335G302470H.fits ft940728_0101_0335G302570H.fits ft940728_0101_0335G302670L.fits ft940728_0101_0335S000301H.fits ft940728_0101_0335S000601L.fits ft940728_0101_0335S100301H.fits ft940728_0101_0335S100801L.fits-> Checking for empty GTI extensions
ft940728_0101_0335S000101L.fits[3] ft940728_0101_0335S000201H.fits[3] ft940728_0101_0335S000401H.fits[3] ft940728_0101_0335S000501L.fits[3] ft940728_0101_0335S000701L.fits[3] ft940728_0101_0335S000801H.fits[3] ft940728_0101_0335S000901L.fits[3] ft940728_0101_0335S001001H.fits[3] ft940728_0101_0335S001101L.fits[3]-> Merging GTIs from the following files:
ft940728_0101_0335S100101L.fits[3] ft940728_0101_0335S100201H.fits[3] ft940728_0101_0335S100401H.fits[3] ft940728_0101_0335S100501H.fits[3] ft940728_0101_0335S100601H.fits[3] ft940728_0101_0335S100701L.fits[3] ft940728_0101_0335S100901L.fits[3] ft940728_0101_0335S101001H.fits[3] ft940728_0101_0335S101101L.fits[3] ft940728_0101_0335S101201H.fits[3] ft940728_0101_0335S101301L.fits[3]-> Merging GTIs from the following files:
ft940728_0101_0335G200170L.fits[3] ft940728_0101_0335G200270H.fits[3] ft940728_0101_0335G200370H.fits[3] ft940728_0101_0335G200470H.fits[3] ft940728_0101_0335G200570H.fits[3] ft940728_0101_0335G200670H.fits[3] ft940728_0101_0335G200770H.fits[3] ft940728_0101_0335G201770H.fits[3] ft940728_0101_0335G201870H.fits[3] ft940728_0101_0335G201970H.fits[3] ft940728_0101_0335G202070L.fits[3] ft940728_0101_0335G202170L.fits[3] ft940728_0101_0335G202270H.fits[3] ft940728_0101_0335G202470H.fits[3] ft940728_0101_0335G202570H.fits[3]-> Merging GTIs from the following files:
ft940728_0101_0335G300170L.fits[3] ft940728_0101_0335G300270H.fits[3] ft940728_0101_0335G300370H.fits[3] ft940728_0101_0335G300470H.fits[3] ft940728_0101_0335G300570H.fits[3] ft940728_0101_0335G301470H.fits[3] ft940728_0101_0335G301570H.fits[3] ft940728_0101_0335G301670H.fits[3] ft940728_0101_0335G301770H.fits[3] ft940728_0101_0335G301870L.fits[3] ft940728_0101_0335G301970L.fits[3] ft940728_0101_0335G302170H.fits[3] ft940728_0101_0335G302370H.fits[3]
GISSORTCODE:LO:Start program GISSORTCODE:LO:End program-> Standard Error Output From STOOL gissortsplit:
GISSORTSPLIT:LO:Start program GISSORTSPLIT:LO:g200170h.prelist merge count = 1 photon cnt = 13 GISSORTSPLIT:LO:g200270h.prelist merge count = 1 photon cnt = 42 GISSORTSPLIT:LO:g200370h.prelist merge count = 1 photon cnt = 114 GISSORTSPLIT:LO:g200470h.prelist merge count = 4 photon cnt = 200001 GISSORTSPLIT:LO:g200570h.prelist merge count = 2 photon cnt = 111 GISSORTSPLIT:LO:g200670h.prelist merge count = 1 photon cnt = 107 GISSORTSPLIT:LO:g200770h.prelist merge count = 1 photon cnt = 96 GISSORTSPLIT:LO:g200870h.prelist merge count = 1 photon cnt = 1 GISSORTSPLIT:LO:g200170l.prelist merge count = 2 photon cnt = 1725 GISSORTSPLIT:LO:g200270l.prelist merge count = 1 photon cnt = 130 GISSORTSPLIT:LO:Total filenames split = 15 GISSORTSPLIT:LO:Total split file cnt = 10 GISSORTSPLIT:LO:End program-> Creating ad12002100g200170h.unf
---- cmerge: version 1.5 ---- A total of 4 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft940728_0101_0335G200570H.fits 2 -- ft940728_0101_0335G200770H.fits 3 -- ft940728_0101_0335G201970H.fits 4 -- ft940728_0101_0335G202570H.fits Merging binary extension #: 2 1 -- ft940728_0101_0335G200570H.fits 2 -- ft940728_0101_0335G200770H.fits 3 -- ft940728_0101_0335G201970H.fits 4 -- ft940728_0101_0335G202570H.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad12002100g200270l.unf
---- cmerge: version 1.5 ---- A total of 2 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft940728_0101_0335G200170L.fits 2 -- ft940728_0101_0335G202170L.fits Merging binary extension #: 2 1 -- ft940728_0101_0335G200170L.fits 2 -- ft940728_0101_0335G202170L.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Ignoring the following files containing 000000130 events
ft940728_0101_0335G202070L.fits-> Ignoring the following files containing 000000114 events
ft940728_0101_0335G200670H.fits-> Ignoring the following files containing 000000111 events
ft940728_0101_0335G200470H.fits ft940728_0101_0335G202470H.fits-> Ignoring the following files containing 000000107 events
ft940728_0101_0335G200270H.fits-> Ignoring the following files containing 000000096 events
ft940728_0101_0335G200370H.fits-> Ignoring the following files containing 000000042 events
ft940728_0101_0335G201870H.fits-> Ignoring the following files containing 000000013 events
ft940728_0101_0335G201770H.fits-> Ignoring the following files containing 000000001 events
ft940728_0101_0335G202270H.fits-> Collecting GIS3 event files by mode
GISSORTCODE:LO:Start program GISSORTCODE:LO:End program-> Standard Error Output From STOOL gissortsplit:
GISSORTSPLIT:LO:Start program GISSORTSPLIT:LO:g300170h.prelist merge count = 1 photon cnt = 2 GISSORTSPLIT:LO:g300270h.prelist merge count = 1 photon cnt = 19 GISSORTSPLIT:LO:g300370h.prelist merge count = 1 photon cnt = 69 GISSORTSPLIT:LO:g300470h.prelist merge count = 3 photon cnt = 226484 GISSORTSPLIT:LO:g300570h.prelist merge count = 1 photon cnt = 111 GISSORTSPLIT:LO:g300670h.prelist merge count = 1 photon cnt = 113 GISSORTSPLIT:LO:g300770h.prelist merge count = 1 photon cnt = 115 GISSORTSPLIT:LO:g300870h.prelist merge count = 1 photon cnt = 3 GISSORTSPLIT:LO:g300170l.prelist merge count = 2 photon cnt = 1698 GISSORTSPLIT:LO:g300270l.prelist merge count = 1 photon cnt = 134 GISSORTSPLIT:LO:Total filenames split = 13 GISSORTSPLIT:LO:Total split file cnt = 10 GISSORTSPLIT:LO:End program-> Creating ad12002100g300170h.unf
---- cmerge: version 1.5 ---- A total of 3 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft940728_0101_0335G300570H.fits 2 -- ft940728_0101_0335G301770H.fits 3 -- ft940728_0101_0335G302370H.fits Merging binary extension #: 2 1 -- ft940728_0101_0335G300570H.fits 2 -- ft940728_0101_0335G301770H.fits 3 -- ft940728_0101_0335G302370H.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad12002100g300270l.unf
---- cmerge: version 1.5 ---- A total of 2 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft940728_0101_0335G300170L.fits 2 -- ft940728_0101_0335G301970L.fits Merging binary extension #: 2 1 -- ft940728_0101_0335G300170L.fits 2 -- ft940728_0101_0335G301970L.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Ignoring the following files containing 000000134 events
ft940728_0101_0335G301870L.fits-> Ignoring the following files containing 000000115 events
ft940728_0101_0335G300370H.fits-> Ignoring the following files containing 000000113 events
ft940728_0101_0335G300270H.fits-> Ignoring the following files containing 000000111 events
ft940728_0101_0335G300470H.fits-> Ignoring the following files containing 000000069 events
ft940728_0101_0335G301670H.fits-> Ignoring the following files containing 000000019 events
ft940728_0101_0335G301570H.fits-> Ignoring the following files containing 000000003 events
ft940728_0101_0335G302170H.fits-> Ignoring the following files containing 000000002 events
ft940728_0101_0335G301470H.fits-> Collecting SIS0 event files by mode
SIS0SORTCODE:LO:Start program SIS0SORTCODE:LO:End program-> Standard Error Output From STOOL sis0sortsplit:
SIS0SORTSPLIT:LO:Start program SIS0SORTSPLIT:LO:s000101h.prelist merge count = 4 photon cnt = 326733 SIS0SORTSPLIT:LO:s000201l.prelist merge count = 5 photon cnt = 4360 SIS0SORTSPLIT:LO:Total filenames split = 9 SIS0SORTSPLIT:LO:Total split file cnt = 2 SIS0SORTSPLIT:LO:End program-> Creating ad12002100s000101h.unf
---- cmerge: version 1.5 ---- A total of 4 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft940728_0101_0335S000201H.fits 2 -- ft940728_0101_0335S000401H.fits 3 -- ft940728_0101_0335S000801H.fits 4 -- ft940728_0101_0335S001001H.fits Merging binary extension #: 2 1 -- ft940728_0101_0335S000201H.fits 2 -- ft940728_0101_0335S000401H.fits 3 -- ft940728_0101_0335S000801H.fits 4 -- ft940728_0101_0335S001001H.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad12002100s000201l.unf
---- cmerge: version 1.5 ---- A total of 5 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft940728_0101_0335S000101L.fits 2 -- ft940728_0101_0335S000501L.fits 3 -- ft940728_0101_0335S000701L.fits 4 -- ft940728_0101_0335S000901L.fits 5 -- ft940728_0101_0335S001101L.fits Merging binary extension #: 2 1 -- ft940728_0101_0335S000101L.fits 2 -- ft940728_0101_0335S000501L.fits 3 -- ft940728_0101_0335S000701L.fits 4 -- ft940728_0101_0335S000901L.fits 5 -- ft940728_0101_0335S001101L.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Collecting SIS1 event files by mode
SIS1SORTCODE:LO:Start program SIS1SORTCODE:LO:End program-> Standard Error Output From STOOL sis1sortsplit:
SIS1SORTSPLIT:LO:Start program SIS1SORTSPLIT:LO:s100101h.prelist merge count = 5 photon cnt = 323511 SIS1SORTSPLIT:LO:s100201h.prelist merge count = 1 photon cnt = 511 SIS1SORTSPLIT:LO:s100301l.prelist merge count = 5 photon cnt = 3782 SIS1SORTSPLIT:LO:Total filenames split = 11 SIS1SORTSPLIT:LO:Total split file cnt = 3 SIS1SORTSPLIT:LO:End program-> Creating ad12002100s100101h.unf
---- cmerge: version 1.5 ---- A total of 5 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft940728_0101_0335S100201H.fits 2 -- ft940728_0101_0335S100401H.fits 3 -- ft940728_0101_0335S100601H.fits 4 -- ft940728_0101_0335S101001H.fits 5 -- ft940728_0101_0335S101201H.fits Merging binary extension #: 2 1 -- ft940728_0101_0335S100201H.fits 2 -- ft940728_0101_0335S100401H.fits 3 -- ft940728_0101_0335S100601H.fits 4 -- ft940728_0101_0335S101001H.fits 5 -- ft940728_0101_0335S101201H.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad12002100s100201l.unf
---- cmerge: version 1.5 ---- A total of 5 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft940728_0101_0335S100101L.fits 2 -- ft940728_0101_0335S100701L.fits 3 -- ft940728_0101_0335S100901L.fits 4 -- ft940728_0101_0335S101101L.fits 5 -- ft940728_0101_0335S101301L.fits Merging binary extension #: 2 1 -- ft940728_0101_0335S100101L.fits 2 -- ft940728_0101_0335S100701L.fits 3 -- ft940728_0101_0335S100901L.fits 4 -- ft940728_0101_0335S101101L.fits 5 -- ft940728_0101_0335S101301L.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Ignoring the following files containing 000000511 events
ft940728_0101_0335S100501H.fits-> Tar-ing together the leftover raw files
a ft940728_0101_0335G200270H.fits 43K a ft940728_0101_0335G200370H.fits 40K a ft940728_0101_0335G200470H.fits 43K a ft940728_0101_0335G200670H.fits 43K a ft940728_0101_0335G201770H.fits 40K a ft940728_0101_0335G201870H.fits 40K a ft940728_0101_0335G202070L.fits 43K a ft940728_0101_0335G202270H.fits 40K a ft940728_0101_0335G202470H.fits 40K a ft940728_0101_0335G300270H.fits 43K a ft940728_0101_0335G300370H.fits 43K a ft940728_0101_0335G300470H.fits 43K a ft940728_0101_0335G301470H.fits 40K a ft940728_0101_0335G301570H.fits 40K a ft940728_0101_0335G301670H.fits 40K a ft940728_0101_0335G301870L.fits 43K a ft940728_0101_0335G302170H.fits 40K a ft940728_0101_0335S100501H.fits 60K-> Checking OBJECT keywords in HK and event files
temp2gain v4.2 opening ft940728_0101.0335 'ft940728_0101.0335' is successfully opened Data Start Time is 49510871.95 (940728 010111) Time Margin 2.0 sec included Sync error detected in 834 th SF Sync error detected in 835 th SF Sync error detected in 836 th SF Sync error detected in 837 th SF Sync error detected in 840 th SF Sync error detected in 870 th SF Sync error detected in 871 th SF Sync error detected in 872 th SF Sync error detected in 873 th SF Sync error detected in 908 th SF Sync error detected in 909 th SF Sync error detected in 910 th SF 'ft940728_0101.0335' EOF detected, sf=2761 Data End Time is 49520155.92 (940728 033555) Gain History is written in ft940728_0101_0335.ghf-> Checking if column CAL_START in ft940728_0101_0335.ghf[1] is in order
Time column is TIME ORDERED-> Checking if column CAL_STOP in ft940728_0101_0335.ghf[1] is in order
Time column is TIME ORDERED
ASCALIN_V0.9t-> Checking if ad12002100g200270l.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002100g300170h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002100g300270l.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002100s000101h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002100s000102h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002100s000112h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002100s000201l.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002100s000202l.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002100s000212l.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002100s100101h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002100s100102h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002100s100112h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002100s100201l.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002100s100202l.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad12002100s100212l.unf is covered by attitude file
ASCALIN_V0.9t
Date and time are: 94/ 7/28 1: 1 mjd=49561.042361 Orbit file name is ./frf.orbit.204 Epoch of Orbital Elements: 1994/7/25 15:0:0 Rigidity Data File: ./rigidity.data.1.23 Attitude FRF: fa940728_0101.0335 S0-HK file: ft940728_0101_0335S0HK.fits S1-HK file: ft940728_0101_0335S1HK.fits G2-HK file: ft940728_0101_0335G2HK.fits G3-HK file: ft940728_0101_0335G3HK.fits output FITS File: ft940728_0101_0335.mkf Total 290 Data bins were processed.-> Checking if column TIME in ft940728_0101_0335.mkf is in order
Time column is TIME ORDERED-> Calculating dead time values for filter file
The sum of the selected column is 3708.4871 The mean of the selected column is 109.07315 The standard deviation of the selected column is 28.344754 The minimum of selected column is 84.281525 The maximum of selected column is 249.56332 The number of points used in calculation is 34-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S0_PIXL0>24 && S0_PIXL0<194.1 ) ) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C0 BRIGHT HIGH 28/07/94 01:10:43 0.53E+04 300850 1000
Processing file: /data/data24/seq_proc/12002100.004/ad12002100s000102h.unf
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data24/seq_proc/12002100.004/screen_work1001.xsl
Total Good Bad: Region Time Phase Cut
286588 120198 0 166390 0 0
Writing events file
120198 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
286588 120198 0 166390 0 0
in 2057.76 seconds
CLEANSIS_V1.6
allocating image arrays...
PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
* Anomalous pixels may consist of at least two populations.
1. Persistent HOT pixels are removed by comparing to the chip mean.
2. Flickering WARM pixels are removed by comparing to the cell mean.
3. In faint areas (zero bgd), flickering pixels are removed with a
cutoff threshold.
Hints:
Choose cell size and thresholds based on the expected background and the PSF.
Use the DIRTYSIS option to examine the anomalous pixel spectra.
Try a multiple pass clean:
Choose a PHA cut to optimize the S/N of the flickering pixels,
then a broad band clean.
Be suspicious of extended source cleans.
For very bright sources you may need to turn off the iteration option.
See the help page for further info (fhelp cleansis)
Poisson clean cell size : 5
Poisson probability threshold : 0.631E-05
Zero Bgd Cutoff threshold (>) : 3
Iterate : T
Dirtysis : F
Minimum PHA value (inclusive) : 0
Maximum PHA value (inclusive) : 4095
open output file: /data/data24/seq_proc/12002100.004/screen_in_event.xsl
reading data file: /data/data24/seq_proc/12002100.004/screen_out_event.xsl
copying primary header to output file...
making chip image...
Total counts in chip images : 120198
copy bad pix array...
cleaning chip # 0
Hot pixels & counts : 16 6723
Flickering pixels iter, pixels & cnts : 1 13 625
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
Number of pixels rejected : 29
Number of (internal) image counts : 120198
Number of image cts rejected (N, %) : 7348 6.1132464
By chip : 0 1 2 3
Pixels rejected : 29 0 0 0
Image counts : 120198 0 0 0
Image cts rejected: 7348 0 0 0
Image cts rej (%) : 6.11 0.00 0.00 0.00
filtering data...
Total counts : 120198 0 0 0
Total cts rejected: 7348 0 0 0
Total cts rej (%) : 6.11 0.00 0.00 0.00
Number of clean counts accepted : 112850
writing history cards...
copying extensions...
writing out hot pixs...
Number of rejected pixels : 29
updating NEVENTS keywords...
closing data file...
closing clean file...
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!screen:ASCA > read events ad12002100s000102h.unf
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad12002100s000102h.evt use_events=no
Wrote cleaned events file to ad12002100s000102h.evt
!screen:ASCA-SIS0-BRIGHT > exit save_session=no
-> Filtering ad12002100s000112h.unf into ad12002100s000112h.evtThe sum of the selected column is 3708.4871 The mean of the selected column is 109.07315 The standard deviation of the selected column is 28.344754 The minimum of selected column is 84.281525 The maximum of selected column is 249.56332 The number of points used in calculation is 34-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S0_PIXL0>24 && S0_PIXL0<194.1 ) ) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C0 BRIGHT2 HIGH 28/07/94 01:10:43 0.53E+04 301098 1000
Processing file: /data/data24/seq_proc/12002100.004/ad12002100s000112h.unf
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data24/seq_proc/12002100.004/screen_work1001.xsl
Total Good Bad: Region Time Phase Cut
287201 120445 0 166756 0 0
Writing events file
120445 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
287201 120445 0 166756 0 0
in 2057.76 seconds
CLEANSIS_V1.6
allocating image arrays...
PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
* Anomalous pixels may consist of at least two populations.
1. Persistent HOT pixels are removed by comparing to the chip mean.
2. Flickering WARM pixels are removed by comparing to the cell mean.
3. In faint areas (zero bgd), flickering pixels are removed with a
cutoff threshold.
Hints:
Choose cell size and thresholds based on the expected background and the PSF.
Use the DIRTYSIS option to examine the anomalous pixel spectra.
Try a multiple pass clean:
Choose a PHA cut to optimize the S/N of the flickering pixels,
then a broad band clean.
Be suspicious of extended source cleans.
For very bright sources you may need to turn off the iteration option.
See the help page for further info (fhelp cleansis)
Poisson clean cell size : 5
Poisson probability threshold : 0.631E-05
Zero Bgd Cutoff threshold (>) : 3
Iterate : T
Dirtysis : F
Minimum PHA value (inclusive) : 0
Maximum PHA value (inclusive) : 4095
open output file: /data/data24/seq_proc/12002100.004/screen_in_event.xsl
reading data file: /data/data24/seq_proc/12002100.004/screen_out_event.xsl
copying primary header to output file...
making chip image...
Total counts in chip images : 120445
copy bad pix array...
cleaning chip # 0
Hot pixels & counts : 16 6723
Flickering pixels iter, pixels & cnts : 1 13 625
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
Number of pixels rejected : 29
Number of (internal) image counts : 120445
Number of image cts rejected (N, %) : 7348 6.1007099
By chip : 0 1 2 3
Pixels rejected : 29 0 0 0
Image counts : 120445 0 0 0
Image cts rejected: 7348 0 0 0
Image cts rej (%) : 6.10 0.00 0.00 0.00
filtering data...
Total counts : 120445 0 0 0
Total cts rejected: 7348 0 0 0
Total cts rej (%) : 6.10 0.00 0.00 0.00
Number of clean counts accepted : 113097
writing history cards...
copying extensions...
writing out hot pixs...
Number of rejected pixels : 29
updating NEVENTS keywords...
closing data file...
closing clean file...
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!screen:ASCA > read events ad12002100s000112h.unf
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 4095
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!screen:ASCA-SIS0-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4" save_file=no
!screen:ASCA-SIS0-BRIGHT2 > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS0-BRIGHT2 > extract events
!screen:ASCA-SIS0-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT2 > save clean outfile=ad12002100s000112h.evt use_events=no
Wrote cleaned events file to ad12002100s000112h.evt
!screen:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Skipping ad12002100s000201l.unf because of mode(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S0_PIXL0>0) ) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C0 BRIGHT LOW 28/07/94 01:02:11 0.22E+04 1245 1000
Processing file: /data/data24/seq_proc/12002100.004/ad12002100s000202l.unf
EXTRACTOR vers 2.0 11 Apr 1997.
Skipping file: /data/data24/seq_proc/12002100.004/screen_work1001.xsl
Writing events file
0 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
0 0 0 0 0 0
in 0.00 seconds
CLEANSIS_V1.6
allocating image arrays...
PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
* Anomalous pixels may consist of at least two populations.
1. Persistent HOT pixels are removed by comparing to the chip mean.
2. Flickering WARM pixels are removed by comparing to the cell mean.
3. In faint areas (zero bgd), flickering pixels are removed with a
cutoff threshold.
Hints:
Choose cell size and thresholds based on the expected background and the PSF.
Use the DIRTYSIS option to examine the anomalous pixel spectra.
Try a multiple pass clean:
Choose a PHA cut to optimize the S/N of the flickering pixels,
then a broad band clean.
Be suspicious of extended source cleans.
For very bright sources you may need to turn off the iteration option.
See the help page for further info (fhelp cleansis)
Poisson clean cell size : 5
Poisson probability threshold : 0.631E-05
Zero Bgd Cutoff threshold (>) : 3
Iterate : T
Dirtysis : F
Minimum PHA value (inclusive) : 0
Maximum PHA value (inclusive) : 4095
open output file: /data/data24/seq_proc/12002100.004/screen_in_event.xsl
reading data file: /data/data24/seq_proc/12002100.004/screen_out_event.xsl
copying primary header to output file...
making chip image...
Total counts in chip images : 0
copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
Number of pixels rejected : 0
Number of (internal) image counts : 0
Number of image cts rejected (N, %) : 0 0.0000000
By chip : 0 1 2 3
Pixels rejected : 0 0 0 0
Image counts : 0 0 0 0
Image cts rejected: 0 0 0 0
Image cts rej (%) : 0.00 0.00 0.00 0.00
filtering data...
Total counts : 0 0 0 0
Total cts rejected: 0 0 0 0
Total cts rej (%) : 0.00 0.00 0.00 0.00
Number of clean counts accepted : 0
writing history cards...
copying extensions...
writing out hot pixs...
Number of rejected pixels : 0
updating NEVENTS keywords...
closing data file...
closing clean file...
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!screen:ASCA > read events ad12002100s000202l.unf
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad12002100s000202l.evt use_events=no
Wrote cleaned events file to ad12002100s000202l.evt
!screen:ASCA-SIS0-BRIGHT > exit save_session=no
-> Deleting ad12002100s000202l.evt since it contains 0 events(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S0_PIXL0>0) ) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C0 BRIGHT2 LOW 28/07/94 01:02:11 0.22E+04 1251 1000
Processing file: /data/data24/seq_proc/12002100.004/ad12002100s000212l.unf
EXTRACTOR vers 2.0 11 Apr 1997.
Skipping file: /data/data24/seq_proc/12002100.004/screen_work1001.xsl
Writing events file
0 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
0 0 0 0 0 0
in 0.00 seconds
CLEANSIS_V1.6
allocating image arrays...
PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
* Anomalous pixels may consist of at least two populations.
1. Persistent HOT pixels are removed by comparing to the chip mean.
2. Flickering WARM pixels are removed by comparing to the cell mean.
3. In faint areas (zero bgd), flickering pixels are removed with a
cutoff threshold.
Hints:
Choose cell size and thresholds based on the expected background and the PSF.
Use the DIRTYSIS option to examine the anomalous pixel spectra.
Try a multiple pass clean:
Choose a PHA cut to optimize the S/N of the flickering pixels,
then a broad band clean.
Be suspicious of extended source cleans.
For very bright sources you may need to turn off the iteration option.
See the help page for further info (fhelp cleansis)
Poisson clean cell size : 5
Poisson probability threshold : 0.631E-05
Zero Bgd Cutoff threshold (>) : 3
Iterate : T
Dirtysis : F
Minimum PHA value (inclusive) : 0
Maximum PHA value (inclusive) : 4095
open output file: /data/data24/seq_proc/12002100.004/screen_in_event.xsl
reading data file: /data/data24/seq_proc/12002100.004/screen_out_event.xsl
copying primary header to output file...
making chip image...
Total counts in chip images : 0
copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
Number of pixels rejected : 0
Number of (internal) image counts : 0
Number of image cts rejected (N, %) : 0 0.0000000
By chip : 0 1 2 3
Pixels rejected : 0 0 0 0
Image counts : 0 0 0 0
Image cts rejected: 0 0 0 0
Image cts rej (%) : 0.00 0.00 0.00 0.00
filtering data...
Total counts : 0 0 0 0
Total cts rejected: 0 0 0 0
Total cts rej (%) : 0.00 0.00 0.00 0.00
Number of clean counts accepted : 0
writing history cards...
copying extensions...
writing out hot pixs...
Number of rejected pixels : 0
updating NEVENTS keywords...
closing data file...
closing clean file...
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!screen:ASCA > read events ad12002100s000212l.unf
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 4095
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!screen:ASCA-SIS0-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4" save_file=no
!screen:ASCA-SIS0-BRIGHT2 > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS0-BRIGHT2 > extract events
!screen:ASCA-SIS0-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT2 > save clean outfile=ad12002100s000212l.evt use_events=no
Wrote cleaned events file to ad12002100s000212l.evt
!screen:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Deleting ad12002100s000212l.evt since it contains 0 eventsThe sum of the selected column is 1751.2682 The mean of the selected column is 116.75121 The standard deviation of the selected column is 15.660710 The minimum of selected column is 94.000305 The maximum of selected column is 150.40674 The number of points used in calculation is 15-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S1_PIXL2>69.7 && S1_PIXL2<163.7 ) ) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C0 BRIGHT HIGH 28/07/94 01:10:43 0.53E+04 309430 0010
Processing file: /data/data24/seq_proc/12002100.004/ad12002100s100102h.unf
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data24/seq_proc/12002100.004/screen_work1001.xsl
Total Good Bad: Region Time Phase Cut
297396 53340 0 244056 0 0
Writing events file
53340 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
297396 53340 0 244056 0 0
in 883.95 seconds
CLEANSIS_V1.6
allocating image arrays...
PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
* Anomalous pixels may consist of at least two populations.
1. Persistent HOT pixels are removed by comparing to the chip mean.
2. Flickering WARM pixels are removed by comparing to the cell mean.
3. In faint areas (zero bgd), flickering pixels are removed with a
cutoff threshold.
Hints:
Choose cell size and thresholds based on the expected background and the PSF.
Use the DIRTYSIS option to examine the anomalous pixel spectra.
Try a multiple pass clean:
Choose a PHA cut to optimize the S/N of the flickering pixels,
then a broad band clean.
Be suspicious of extended source cleans.
For very bright sources you may need to turn off the iteration option.
See the help page for further info (fhelp cleansis)
Poisson clean cell size : 5
Poisson probability threshold : 0.631E-05
Zero Bgd Cutoff threshold (>) : 3
Iterate : T
Dirtysis : F
Minimum PHA value (inclusive) : 0
Maximum PHA value (inclusive) : 4095
open output file: /data/data24/seq_proc/12002100.004/screen_in_event.xsl
reading data file: /data/data24/seq_proc/12002100.004/screen_out_event.xsl
copying primary header to output file...
making chip image...
Total counts in chip images : 53340
copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
Hot pixels & counts : 0 0
Flickering pixels iter, pixels & cnts : 1 9 239
cleaning chip # 3
Number of pixels rejected : 9
Number of (internal) image counts : 53340
Number of image cts rejected (N, %) : 239 0.4480690
By chip : 0 1 2 3
Pixels rejected : 0 0 9 0
Image counts : 0 0 53340 0
Image cts rejected: 0 0 239 0
Image cts rej (%) : 0.00 0.00 0.45 0.00
filtering data...
Total counts : 0 0 53340 0
Total cts rejected: 0 0 239 0
Total cts rej (%) : 0.00 0.00 0.45 0.00
Number of clean counts accepted : 53101
writing history cards...
copying extensions...
writing out hot pixs...
Number of rejected pixels : 9
updating NEVENTS keywords...
closing data file...
closing clean file...
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!screen:ASCA > read events ad12002100s100102h.unf
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad12002100s100102h.evt use_events=no
Wrote cleaned events file to ad12002100s100102h.evt
!screen:ASCA-SIS1-BRIGHT > exit save_session=no
-> Filtering ad12002100s100112h.unf into ad12002100s100112h.evtThe sum of the selected column is 1751.2682 The mean of the selected column is 116.75121 The standard deviation of the selected column is 15.660710 The minimum of selected column is 94.000305 The maximum of selected column is 150.40674 The number of points used in calculation is 15-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S1_PIXL2>69.7 && S1_PIXL2<163.7 ) ) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C0 BRIGHT2 HIGH 28/07/94 01:10:43 0.53E+04 309515 0010
Processing file: /data/data24/seq_proc/12002100.004/ad12002100s100112h.unf
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data24/seq_proc/12002100.004/screen_work1001.xsl
Total Good Bad: Region Time Phase Cut
297610 53373 0 244237 0 0
Writing events file
53373 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
297610 53373 0 244237 0 0
in 883.95 seconds
CLEANSIS_V1.6
allocating image arrays...
PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
* Anomalous pixels may consist of at least two populations.
1. Persistent HOT pixels are removed by comparing to the chip mean.
2. Flickering WARM pixels are removed by comparing to the cell mean.
3. In faint areas (zero bgd), flickering pixels are removed with a
cutoff threshold.
Hints:
Choose cell size and thresholds based on the expected background and the PSF.
Use the DIRTYSIS option to examine the anomalous pixel spectra.
Try a multiple pass clean:
Choose a PHA cut to optimize the S/N of the flickering pixels,
then a broad band clean.
Be suspicious of extended source cleans.
For very bright sources you may need to turn off the iteration option.
See the help page for further info (fhelp cleansis)
Poisson clean cell size : 5
Poisson probability threshold : 0.631E-05
Zero Bgd Cutoff threshold (>) : 3
Iterate : T
Dirtysis : F
Minimum PHA value (inclusive) : 0
Maximum PHA value (inclusive) : 4095
open output file: /data/data24/seq_proc/12002100.004/screen_in_event.xsl
reading data file: /data/data24/seq_proc/12002100.004/screen_out_event.xsl
copying primary header to output file...
making chip image...
Total counts in chip images : 53373
copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
Hot pixels & counts : 0 0
Flickering pixels iter, pixels & cnts : 1 9 239
cleaning chip # 3
Number of pixels rejected : 9
Number of (internal) image counts : 53373
Number of image cts rejected (N, %) : 239 0.4477920
By chip : 0 1 2 3
Pixels rejected : 0 0 9 0
Image counts : 0 0 53373 0
Image cts rejected: 0 0 239 0
Image cts rej (%) : 0.00 0.00 0.45 0.00
filtering data...
Total counts : 0 0 53373 0
Total cts rejected: 0 0 239 0
Total cts rej (%) : 0.00 0.00 0.45 0.00
Number of clean counts accepted : 53134
writing history cards...
copying extensions...
writing out hot pixs...
Number of rejected pixels : 9
updating NEVENTS keywords...
closing data file...
closing clean file...
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!screen:ASCA > read events ad12002100s100112h.unf
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 4095
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4" save_file=no
!screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS1-BRIGHT2 > extract events
!screen:ASCA-SIS1-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT2 > save clean outfile=ad12002100s100112h.evt use_events=no
Wrote cleaned events file to ad12002100s100112h.evt
!screen:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Skipping ad12002100s100201l.unf because of mode(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S1_PIXL2>0) ) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C0 BRIGHT LOW 28/07/94 01:02:11 0.22E+04 1462 0010
Processing file: /data/data24/seq_proc/12002100.004/ad12002100s100202l.unf
EXTRACTOR vers 2.0 11 Apr 1997.
Skipping file: /data/data24/seq_proc/12002100.004/screen_work1001.xsl
Writing events file
0 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
0 0 0 0 0 0
in 0.00 seconds
CLEANSIS_V1.6
allocating image arrays...
PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
* Anomalous pixels may consist of at least two populations.
1. Persistent HOT pixels are removed by comparing to the chip mean.
2. Flickering WARM pixels are removed by comparing to the cell mean.
3. In faint areas (zero bgd), flickering pixels are removed with a
cutoff threshold.
Hints:
Choose cell size and thresholds based on the expected background and the PSF.
Use the DIRTYSIS option to examine the anomalous pixel spectra.
Try a multiple pass clean:
Choose a PHA cut to optimize the S/N of the flickering pixels,
then a broad band clean.
Be suspicious of extended source cleans.
For very bright sources you may need to turn off the iteration option.
See the help page for further info (fhelp cleansis)
Poisson clean cell size : 5
Poisson probability threshold : 0.631E-05
Zero Bgd Cutoff threshold (>) : 3
Iterate : T
Dirtysis : F
Minimum PHA value (inclusive) : 0
Maximum PHA value (inclusive) : 4095
open output file: /data/data24/seq_proc/12002100.004/screen_in_event.xsl
reading data file: /data/data24/seq_proc/12002100.004/screen_out_event.xsl
copying primary header to output file...
making chip image...
Total counts in chip images : 0
copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
Number of pixels rejected : 0
Number of (internal) image counts : 0
Number of image cts rejected (N, %) : 0 0.0000000
By chip : 0 1 2 3
Pixels rejected : 0 0 0 0
Image counts : 0 0 0 0
Image cts rejected: 0 0 0 0
Image cts rej (%) : 0.00 0.00 0.00 0.00
filtering data...
Total counts : 0 0 0 0
Total cts rejected: 0 0 0 0
Total cts rej (%) : 0.00 0.00 0.00 0.00
Number of clean counts accepted : 0
writing history cards...
copying extensions...
writing out hot pixs...
Number of rejected pixels : 0
updating NEVENTS keywords...
closing data file...
closing clean file...
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!screen:ASCA > read events ad12002100s100202l.unf
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad12002100s100202l.evt use_events=no
Wrote cleaned events file to ad12002100s100202l.evt
!screen:ASCA-SIS1-BRIGHT > exit save_session=no
-> Deleting ad12002100s100202l.evt since it contains 0 events(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S1_PIXL2>0) ) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C0 BRIGHT2 LOW 28/07/94 01:02:11 0.22E+04 1462 0010
Processing file: /data/data24/seq_proc/12002100.004/ad12002100s100212l.unf
EXTRACTOR vers 2.0 11 Apr 1997.
Skipping file: /data/data24/seq_proc/12002100.004/screen_work1001.xsl
Writing events file
0 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
0 0 0 0 0 0
in 0.00 seconds
CLEANSIS_V1.6
allocating image arrays...
PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
* Anomalous pixels may consist of at least two populations.
1. Persistent HOT pixels are removed by comparing to the chip mean.
2. Flickering WARM pixels are removed by comparing to the cell mean.
3. In faint areas (zero bgd), flickering pixels are removed with a
cutoff threshold.
Hints:
Choose cell size and thresholds based on the expected background and the PSF.
Use the DIRTYSIS option to examine the anomalous pixel spectra.
Try a multiple pass clean:
Choose a PHA cut to optimize the S/N of the flickering pixels,
then a broad band clean.
Be suspicious of extended source cleans.
For very bright sources you may need to turn off the iteration option.
See the help page for further info (fhelp cleansis)
Poisson clean cell size : 5
Poisson probability threshold : 0.631E-05
Zero Bgd Cutoff threshold (>) : 3
Iterate : T
Dirtysis : F
Minimum PHA value (inclusive) : 0
Maximum PHA value (inclusive) : 4095
open output file: /data/data24/seq_proc/12002100.004/screen_in_event.xsl
reading data file: /data/data24/seq_proc/12002100.004/screen_out_event.xsl
copying primary header to output file...
making chip image...
Total counts in chip images : 0
copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
Number of pixels rejected : 0
Number of (internal) image counts : 0
Number of image cts rejected (N, %) : 0 0.0000000
By chip : 0 1 2 3
Pixels rejected : 0 0 0 0
Image counts : 0 0 0 0
Image cts rejected: 0 0 0 0
Image cts rej (%) : 0.00 0.00 0.00 0.00
filtering data...
Total counts : 0 0 0 0
Total cts rejected: 0 0 0 0
Total cts rej (%) : 0.00 0.00 0.00 0.00
Number of clean counts accepted : 0
writing history cards...
copying extensions...
writing out hot pixs...
Number of rejected pixels : 0
updating NEVENTS keywords...
closing data file...
closing clean file...
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!screen:ASCA > read events ad12002100s100212l.unf
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 4095
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4" save_file=no
!screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS1-BRIGHT2 > extract events
!screen:ASCA-SIS1-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT2 > save clean outfile=ad12002100s100212l.evt use_events=no
Wrote cleaned events file to ad12002100s100212l.evt
!screen:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Deleting ad12002100s100212l.evt since it contains 0 events(SAA==0)&& (COR>4)&& (G2_H0+G2_H2+G3_H0+G3_H2<45)&& (G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&& (RBM_CONT<100)&& (ELV>5)&& (ACS==0)&& (ANG_DIST>0)&& (ANG_DIST<0.01)&& (G2_L1>0)-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C0 PH HIGH 28/07/94 01:10:55 0.44E+04 200001 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data24/seq_proc/12002100.004/ad12002100g200170h.unf
Total Good Bad: Region Time Phase Cut
200001 139818 4347 55836 0 0
Writing events file
139818 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
200001 139818 4347 55836 0 0
in 2765.97 seconds
Infile # of rows Outfile # of rows # filtered
---------------- ----------------- ----------
139818 138938 880
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!screen:ASCA > read events ad12002100g200170h.unf
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad12002100g200170h.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no
-> Setting NEVENTS to 138938 in ad12002100g200170h.unf(SAA==0)&& (COR>4)&& (G2_H0+G2_H2+G3_H0+G3_H2<45)&& (G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&& (RBM_CONT<100)&& (ELV>5)&& (ACS==0)&& (ANG_DIST>0)&& (ANG_DIST<0.01)&& (G2_L1>0)-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C0 PH LOW 28/07/94 01:02:17 0.14E+04 1725 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Skipping file: /data/data24/seq_proc/12002100.004/ad12002100g200270l.unf
Writing events file
0 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
0 0 0 0 0 0
in 0.00 seconds
Infile # of rows Outfile # of rows # filtered
---------------- ----------------- ----------
0 0 0
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!screen:ASCA > read events ad12002100g200270l.unf
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 2.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad12002100g200270l.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no
-> Deleting ad12002100g200270l.evt since it contains 0 events(SAA==0)&& (COR>4)&& (G2_H0+G2_H2+G3_H0+G3_H2<45)&& (G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&& (RBM_CONT<100)&& (ELV>5)&& (ACS==0)&& (ANG_DIST>0)&& (ANG_DIST<0.01)&& (G3_L1>0)-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C0 PH HIGH 28/07/94 01:10:55 0.44E+04 226484 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data24/seq_proc/12002100.004/ad12002100g300170h.unf
Total Good Bad: Region Time Phase Cut
226484 158898 2961 64625 0 0
Writing events file
158898 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
226484 158898 2961 64625 0 0
in 2767.97 seconds
Infile # of rows Outfile # of rows # filtered
---------------- ----------------- ----------
158898 158128 770
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!screen:ASCA > read events ad12002100g300170h.unf
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad12002100g300170h.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no
-> Setting NEVENTS to 158128 in ad12002100g300170h.unf(SAA==0)&& (COR>4)&& (G2_H0+G2_H2+G3_H0+G3_H2<45)&& (G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&& (RBM_CONT<100)&& (ELV>5)&& (ACS==0)&& (ANG_DIST>0)&& (ANG_DIST<0.01)&& (G3_L1>0)-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] screen
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C0 PH LOW 28/07/94 01:02:17 0.14E+04 1698 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Skipping file: /data/data24/seq_proc/12002100.004/ad12002100g300270l.unf
Writing events file
0 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
0 0 0 0 0 0
in 0.00 seconds
Infile # of rows Outfile # of rows # filtered
---------------- ----------------- ----------
0 0 0
Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!screen:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!screen:ASCA > read events ad12002100g300270l.unf
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 2.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad12002100g300270l.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no
-> Deleting ad12002100g300270l.evt since it contains 0 events-ANNULUS(128.5,128.5,192,88) -ELLIPSE(167.5,220,24.66,28.95,245.298)-> gis2_ano_on_flf_180295.fits already present in current directory
ASCAEXPO_V0.9b
reading data file: ad12002100g200170h.evt
reading gti ext: STDGTI
reading cal file: gis2_ano_on_flf_180295.fits
reading inst file: GIS2_REGION256.4_regionmap.tmp
making an inst map...
multiply inst map...
reading att file: ./fa940728_0101.0335
making an exposure map...
Aspect RA/DEC/ROLL : 350.7280 58.7821 323.0289
Mean RA/DEC/ROLL : 350.7605 58.7601 323.0289
Pnt RA/DEC/ROLL : 350.7020 58.8015 323.0289
Image rebin factor : 1
Attitude Records : 10930
GTI intervals : 11
Total GTI (secs) : 2765.973
Max attitude excursion (arcsecs) : 5.000
0 Percent Complete: Total/live time: 0.0000000 0.0000000
10 Percent Complete: Total/live time: 1489.9979248 1489.9979248
20 Percent Complete: Total/live time: 1489.9979248 1489.9979248
30 Percent Complete: Total/live time: 2765.9724121 2765.9724121
100 Percent Complete: Total/live time: 2765.9724121 2765.9724121
Number of attitude steps used: 3
Number of attitude steps avail: 9871
Mean RA/DEC pixel offset: -8.5242 -2.5157
writing expo file: ad12002100g200170h.expo
closing attitude file...
closing data file...
-> Generating low and high energy images for ad12002100g200170h.evt
** XSELECT V1.3 **
!> Enter session name >[xsel] ad12002100g200170h
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C0 PH HIGH 28/07/94 01:10:55 0.28E+04 138938 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data24/seq_proc/12002100.004/ad12002100g200170h.evt
Total Good Bad: Region Time Phase Cut
138938 138865 73 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
138938 138865 73 0 0 0
in 2765.97 seconds
Image has 138865 counts for 50.20 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data24/seq_proc/12002100.004/ad12002100g200170h.evt
Total Good Bad: Region Time Phase Cut
138938 86460 73 0 0 52405
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
138938 86460 73 0 0 52405
in 2765.97 seconds
Image has 86460 counts for 31.26 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data24/seq_proc/12002100.004/ad12002100g200170h.evt
Total Good Bad: Region Time Phase Cut
138938 53309 73 0 0 85556
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
138938 53309 73 0 0 85556
in 2765.97 seconds
Image has 53309 counts for 19.27 counts/sec
Command not found; type ? for a command listing
!ad12002100g200170h:ASCA >
!ad12002100g200170h:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!ad12002100g200170h:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!ad12002100g200170h:ASCA > read events ad12002100g200170h.evt
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!ad12002100g200170h:ASCA-GIS2-PH > set image sky
!ad12002100g200170h:ASCA-GIS2-PH > filter region corner_point.reg
!ad12002100g200170h:ASCA-GIS2-PH > extract image
!ad12002100g200170h:ASCA-GIS2-PH > save image outfile=ad12002100g200170h.img
Wrote image to file ad12002100g200170h.img
!ad12002100g200170h:ASCA-GIS2-PH > filter pha_cut 0 170
!ad12002100g200170h:ASCA-GIS2-PH > extract image
!ad12002100g200170h:ASCA-GIS2-PH > save image outfile=ad12002100g200170h_lo.img
Wrote image to file ad12002100g200170h_lo.img
!ad12002100g200170h:ASCA-GIS2-PH > clear pha_cut
!ad12002100g200170h:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound: 1024 is above the maximum value.
!ad12002100g200170h:ASCA-GIS2-PH > extract image
!ad12002100g200170h:ASCA-GIS2-PH > save image outfile=ad12002100g200170h_hi.img
Wrote image to file ad12002100g200170h_hi.img
!ad12002100g200170h:ASCA-GIS2-PH > exit save_session=no
-> Generating exposure map ad12002100g300170h.expo-ANNULUS(128.5,128.5,192,88) -ELLIPSE(217,95,21.56,25.92,169.216)-> gis3_ano_on_flf_180295.fits already present in current directory
ASCAEXPO_V0.9b
reading data file: ad12002100g300170h.evt
reading gti ext: STDGTI
reading cal file: gis3_ano_on_flf_180295.fits
reading inst file: GIS3_REGION256.4_regionmap.tmp
making an inst map...
multiply inst map...
reading att file: ./fa940728_0101.0335
making an exposure map...
Aspect RA/DEC/ROLL : 350.7280 58.7821 322.9988
Mean RA/DEC/ROLL : 350.7252 58.7770 322.9988
Pnt RA/DEC/ROLL : 350.7372 58.7847 322.9988
Image rebin factor : 1
Attitude Records : 10930
GTI intervals : 11
Total GTI (secs) : 2767.973
Max attitude excursion (arcsecs) : 5.000
0 Percent Complete: Total/live time: 0.0000000 0.0000000
10 Percent Complete: Total/live time: 1491.9979248 1491.9979248
20 Percent Complete: Total/live time: 1491.9979248 1491.9979248
30 Percent Complete: Total/live time: 2767.9724121 2767.9724121
100 Percent Complete: Total/live time: 2767.9724121 2767.9724121
Number of attitude steps used: 3
Number of attitude steps avail: 9871
Mean RA/DEC pixel offset: -0.4717 -1.7157
writing expo file: ad12002100g300170h.expo
closing attitude file...
closing data file...
-> Generating low and high energy images for ad12002100g300170h.evt
** XSELECT V1.3 **
!> Enter session name >[xsel] ad12002100g300170h
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C0 PH HIGH 28/07/94 01:10:55 0.28E+04 158128 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data24/seq_proc/12002100.004/ad12002100g300170h.evt
Total Good Bad: Region Time Phase Cut
158128 158080 48 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
158128 158080 48 0 0 0
in 2767.97 seconds
Image has 158080 counts for 57.11 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data24/seq_proc/12002100.004/ad12002100g300170h.evt
Total Good Bad: Region Time Phase Cut
158128 97371 48 0 0 60709
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
158128 97371 48 0 0 60709
in 2767.97 seconds
Image has 97371 counts for 35.18 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data24/seq_proc/12002100.004/ad12002100g300170h.evt
Total Good Bad: Region Time Phase Cut
158128 61716 48 0 0 96364
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
158128 61716 48 0 0 96364
in 2767.97 seconds
Image has 61716 counts for 22.30 counts/sec
Command not found; type ? for a command listing
!ad12002100g300170h:ASCA >
!ad12002100g300170h:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!ad12002100g300170h:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!ad12002100g300170h:ASCA > read events ad12002100g300170h.evt
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!ad12002100g300170h:ASCA-GIS3-PH > set image sky
!ad12002100g300170h:ASCA-GIS3-PH > filter region corner_point.reg
!ad12002100g300170h:ASCA-GIS3-PH > extract image
!ad12002100g300170h:ASCA-GIS3-PH > save image outfile=ad12002100g300170h.img
Wrote image to file ad12002100g300170h.img
!ad12002100g300170h:ASCA-GIS3-PH > filter pha_cut 0 170
!ad12002100g300170h:ASCA-GIS3-PH > extract image
!ad12002100g300170h:ASCA-GIS3-PH > save image outfile=ad12002100g300170h_lo.img
Wrote image to file ad12002100g300170h_lo.img
!ad12002100g300170h:ASCA-GIS3-PH > clear pha_cut
!ad12002100g300170h:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound: 1024 is above the maximum value.
!ad12002100g300170h:ASCA-GIS3-PH > extract image
!ad12002100g300170h:ASCA-GIS3-PH > save image outfile=ad12002100g300170h_hi.img
Wrote image to file ad12002100g300170h_hi.img
!ad12002100g300170h:ASCA-GIS3-PH > exit save_session=no
-> Generating exposure map ad12002100s000102h.expo
ASCAEXPO_V0.9b
reading data file: ad12002100s000102h.evt
reading gti ext: STDGTI
reading hp ext: HOT_PIXELS
reading cal file: s0_teldef_ascalin.fits
making an inst map...
SIS AREA DISC ENABL OFF
CHIP: 0 1 2 3
CCD POWER ON/OFF: ON OFF OFF OFF
AREA DISC IN/OUT: OUT OUT OUT OUT
AREA DISC H START: 6 6 6 6
AREA DISC H STOP: 425 425 425 425
AREA DISC V START: 2 2 2 2
AREA DISC V STOP: 422 422 422 422
reading att file: ./fa940728_0101.0335
making an exposure map...
Aspect RA/DEC/ROLL : 350.7280 58.7821 322.9984
Mean RA/DEC/ROLL : 350.7248 58.7564 322.9984
Pnt RA/DEC/ROLL : 350.7358 58.8058 322.9984
Image rebin factor : 4
Attitude Records : 10930
Hot Pixels : 29
GTI intervals : 10
Total GTI (secs) : 2057.756
Max attitude excursion (arcsecs) : 5.000
0 Percent Complete: Total/live time: 0.0000000 0.0000000
10 Percent Complete: Total/live time: 1013.8101196 1013.8101196
20 Percent Complete: Total/live time: 1013.8101196 1013.8101196
30 Percent Complete: Total/live time: 2057.7558594 2057.7558594
100 Percent Complete: Total/live time: 2057.7558594 2057.7558594
Number of attitude steps used: 3
Number of attitude steps avail: 8097
Mean RA/DEC pixel offset: -41.8641 -66.0263
writing expo file: ad12002100s000102h.expo
closing attitude file...
closing data file...
-> Generating low and high energy images for ad12002100s000102h.evt
** XSELECT V1.3 **
!> Enter session name >[xsel] ad12002100s000102h
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C0 BRIGHT HIGH 28/07/94 01:10:43 0.21E+04 112850 1000
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data24/seq_proc/12002100.004/ad12002100s000102h.evt
Total Good Bad: Region Time Phase Cut
112850 112850 0 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
112850 112850 0 0 0 0
in 2057.76 seconds
Image has 112850 counts for 54.84 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data24/seq_proc/12002100.004/ad12002100s000102h.evt
Total Good Bad: Region Time Phase Cut
112850 76240 0 0 0 36610
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
112850 76240 0 0 0 36610
in 2057.76 seconds
Image has 76240 counts for 37.05 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data24/seq_proc/12002100.004/ad12002100s000102h.evt
Total Good Bad: Region Time Phase Cut
112850 36802 0 0 0 76048
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
112850 36802 0 0 0 76048
in 2057.76 seconds
Image has 36802 counts for 17.88 counts/sec
Command not found; type ? for a command listing
!ad12002100s000102h:ASCA >
!ad12002100s000102h:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!ad12002100s000102h:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!ad12002100s000102h:ASCA > read events ad12002100s000102h.evt
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!ad12002100s000102h:ASCA-SIS0-BRIGHT > set image sky
!ad12002100s000102h:ASCA-SIS0-BRIGHT > filter region corner_point.reg
!ad12002100s000102h:ASCA-SIS0-BRIGHT > extract image
!ad12002100s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad12002100s000102h.img
Wrote image to file ad12002100s000102h.img
!ad12002100s000102h:ASCA-SIS0-BRIGHT > filter pha_cut 0 547
!ad12002100s000102h:ASCA-SIS0-BRIGHT > extract image
!ad12002100s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad12002100s000102h_lo.img
Wrote image to file ad12002100s000102h_lo.img
!ad12002100s000102h:ASCA-SIS0-BRIGHT > clear pha_cut
!ad12002100s000102h:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound: 2048 is above the maximum value.
!ad12002100s000102h:ASCA-SIS0-BRIGHT > extract image
!ad12002100s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad12002100s000102h_hi.img
Wrote image to file ad12002100s000102h_hi.img
!ad12002100s000102h:ASCA-SIS0-BRIGHT > exit save_session=no
-> Generating exposure map ad12002100s100102h.expo
ASCAEXPO_V0.9b
reading data file: ad12002100s100102h.evt
reading gti ext: STDGTI
reading hp ext: HOT_PIXELS
reading cal file: s1_teldef_ascalin.fits
making an inst map...
SIS AREA DISC ENABL ON
CHIP: 0 1 2 3
CCD POWER ON/OFF: OFF OFF ON OFF
AREA DISC IN/OUT: OUT OUT OUT OUT
AREA DISC H START: 6 6 6 6
AREA DISC H STOP: 425 425 342 425
AREA DISC V START: 2 2 123 2
AREA DISC V STOP: 422 422 422 422
reading att file: ./fa940728_0101.0335
making an exposure map...
Aspect RA/DEC/ROLL : 350.7280 58.7821 323.0154
Mean RA/DEC/ROLL : 350.7448 58.7685 323.0154
Pnt RA/DEC/ROLL : 350.7159 58.7937 323.0154
Image rebin factor : 4
Attitude Records : 10930
Hot Pixels : 9
GTI intervals : 18
Total GTI (secs) : 883.946
Max attitude excursion (arcsecs) : 5.000
0 Percent Complete: Total/live time: 0.0000000 0.0000000
10 Percent Complete: Total/live time: 416.0000000 416.0000000
20 Percent Complete: Total/live time: 416.0000000 416.0000000
30 Percent Complete: Total/live time: 883.9458008 883.9458008
100 Percent Complete: Total/live time: 883.9458008 883.9458008
Number of attitude steps used: 3
Number of attitude steps avail: 8097
Mean RA/DEC pixel offset: -44.8270 -18.1256
writing expo file: ad12002100s100102h.expo
closing attitude file...
closing data file...
-> Generating low and high energy images for ad12002100s100102h.evt
** XSELECT V1.3 **
!> Enter session name >[xsel] ad12002100s100102h
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C0 BRIGHT HIGH 28/07/94 01:10:43 0.88E+03 53101 0010
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data24/seq_proc/12002100.004/ad12002100s100102h.evt
Total Good Bad: Region Time Phase Cut
53101 53101 0 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
53101 53101 0 0 0 0
in 883.95 seconds
Image has 53101 counts for 60.07 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data24/seq_proc/12002100.004/ad12002100s100102h.evt
Total Good Bad: Region Time Phase Cut
53101 34350 0 0 0 18751
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
53101 34350 0 0 0 18751
in 883.95 seconds
Image has 34350 counts for 38.86 counts/sec
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data24/seq_proc/12002100.004/ad12002100s100102h.evt
Total Good Bad: Region Time Phase Cut
53101 18839 0 0 0 34262
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
53101 18839 0 0 0 34262
in 883.95 seconds
Image has 18839 counts for 21.31 counts/sec
Command not found; type ? for a command listing
!ad12002100s100102h:ASCA >
!ad12002100s100102h:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!ad12002100s100102h:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!ad12002100s100102h:ASCA > read events ad12002100s100102h.evt
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!ad12002100s100102h:ASCA-SIS1-BRIGHT > set image sky
!ad12002100s100102h:ASCA-SIS1-BRIGHT > filter region corner_point.reg
!ad12002100s100102h:ASCA-SIS1-BRIGHT > extract image
!ad12002100s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad12002100s100102h.img
Wrote image to file ad12002100s100102h.img
!ad12002100s100102h:ASCA-SIS1-BRIGHT > filter pha_cut 0 547
!ad12002100s100102h:ASCA-SIS1-BRIGHT > extract image
!ad12002100s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad12002100s100102h_lo.img
Wrote image to file ad12002100s100102h_lo.img
!ad12002100s100102h:ASCA-SIS1-BRIGHT > clear pha_cut
!ad12002100s100102h:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound: 2048 is above the maximum value.
!ad12002100s100102h:ASCA-SIS1-BRIGHT > extract image
!ad12002100s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad12002100s100102h_hi.img
Wrote image to file ad12002100s100102h_hi.img
!ad12002100s100102h:ASCA-SIS1-BRIGHT > exit save_session=no
-> Summing sis imagesad12002100s000102h.expo ad12002100s100102h.expo-> Summing the following images to produce ad12002100sis32002_all.totsky
ad12002100s000102h.img ad12002100s100102h.img-> Summing the following images to produce ad12002100sis32002_lo.totsky
ad12002100s000102h_lo.img ad12002100s100102h_lo.img-> Summing the following images to produce ad12002100sis32002_hi.totsky
ad12002100s000102h_hi.img ad12002100s100102h_hi.img-> Running XIMAGE to create ad12002100sis32002.gif
No of detectors read in: 20 ![1]XIMAGE> read/fits ad12002100sis32002_all.totsky Reading an image Telescope ASCA SIS0 Image display size = 320 Done, closing file Largest, Smallest 115.000 0. Bscale, Bzero from file 1.0000000000000 0. After internal scaling Bscale and Bzero 1.0000000000000 0. Image level, max: 115 min: 0 ![2]XIMAGE> read/exp_map ad12002100sis32002.totexpo Reading an image Telescope ASCA SIS0 Image display size = 320 Done, closing file Largest, Smallest 49.0284 0. Bscale, Bzero from file 1.0000000000000 0. After internal scaling Bscale and Bzero 1.0000000000000 0. Image level, max: 49 min: 0 ![3]XIMAGE> smooth ![4]XIMAGE> cpd /ppm ![5]XIMAGE> cey 2000 ![6]XIMAGE> disp/correct/noframe Displaying image The image is exposure corrected Min = 0 max = 32767 ![7]XIMAGE> grid ![8]XIMAGE> scale scal_f, min_inten 1.00000 0. i,inten,mm,pp 1 0. 0 0 i,inten,mm,pp 2 5.00000 50 -1 i,inten,mm,pp 3 18.0000 18 0 i,inten,mm,pp 4 54.0000 54 0 ![9]XIMAGE> exit-> Summing gis images
ad12002100g200170h.expo ad12002100g300170h.expo-> Summing the following images to produce ad12002100gis25670_all.totsky
ad12002100g200170h.img ad12002100g300170h.img-> Summing the following images to produce ad12002100gis25670_lo.totsky
ad12002100g200170h_lo.img ad12002100g300170h_lo.img-> Summing the following images to produce ad12002100gis25670_hi.totsky
ad12002100g200170h_hi.img ad12002100g300170h_hi.img-> Running XIMAGE to create ad12002100gis25670.gif
No of detectors read in: 20 ![1]XIMAGE> read/fits ad12002100gis25670_all.totsky Reading an image Telescope ASCA GIS2 Image display size = 256 Done, closing file Largest, Smallest 635.000 0. Bscale, Bzero from file 1.0000000000000 0. After internal scaling Bscale and Bzero 1.0000000000000 0. Image level, max: 635 min: 0 ![2]XIMAGE> read/exp_map ad12002100gis25670.totexpo Reading an image Telescope ASCA GIS2 Image display size = 256 Done, closing file Largest, Smallest 92.2324 0. Bscale, Bzero from file 1.0000000000000 0. After internal scaling Bscale and Bzero 1.0000000000000 0. Image level, max: 92 min: 0 ![3]XIMAGE> smooth ![4]XIMAGE> cpd /ppm ![5]XIMAGE> cey 2000 ![6]XIMAGE> disp/correct/noframe Displaying image The image is exposure corrected Min = 0 max = 575 ![7]XIMAGE> grid ![8]XIMAGE> scale scal_f, min_inten 1.00000 0. i,inten,mm,pp 1 0. 0 0 i,inten,mm,pp 2 4.00000 40 -1 i,inten,mm,pp 3 15.0000 15 0 i,inten,mm,pp 4 78.0000 78 0 ![9]XIMAGE> exit
109 134 0.0966761 111 15 2572.65-> Smoothing ad12002100gis25670_hi.totsky with ad12002100gis25670.totexpo
109 134 0.038309 111 15 1947.84-> Smoothing ad12002100gis25670_lo.totsky with ad12002100gis25670.totexpo
108 137 0.0601941 113 15 3628.38-> Determining extraction radii
109 134 24 T-> Standard Output From STOOL colorpic:
color plane 0 color plane 1 color plane 2 writing image image written-> Creating fits catalog of sources: ad12002100gis25670.src
107 172 0.031841 99 34 649.78-> Smoothing ad12002100sis32002_hi.totsky with ad12002100sis32002.totexpo
107 172 0.0111425 99 34 547.457-> Smoothing ad12002100sis32002_lo.totsky with ad12002100sis32002.totexpo
121 193 0.0211895 110 34 569.247-> Determining extraction radii
107 172 38 T-> Standard Output From STOOL colorpic:
color plane 0 color plane 1 color plane 2 writing image image written-> Creating fits catalog of sources: ad12002100sis32002.src
The sum of the selected column is 25241.000 The mean of the selected column is 467.42593 The standard deviation of the selected column is 1.3681257 The minimum of selected column is 464.00000 The maximum of selected column is 470.00000 The number of points used in calculation is 54-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 40975.000 The mean of the selected column is 758.79630 The standard deviation of the selected column is 1.5945619 The minimum of selected column is 755.00000 The maximum of selected column is 762.00000 The number of points used in calculation is 54-> Converting (428.0,688.0,2.0) to s1 detector coordinates
The sum of the selected column is 11632.000 The mean of the selected column is 465.28000 The standard deviation of the selected column is 1.2754084 The minimum of selected column is 463.00000 The maximum of selected column is 468.00000 The number of points used in calculation is 25-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 19845.000 The mean of the selected column is 793.80000 The standard deviation of the selected column is 1.4719601 The minimum of selected column is 791.00000 The maximum of selected column is 797.00000 The number of points used in calculation is 25-> Converting (109.0,134.0,2.0) to g2 detector coordinates
The sum of the selected column is 344386.00 The mean of the selected column is 109.53753 The standard deviation of the selected column is 1.1104415 The minimum of selected column is 107.00000 The maximum of selected column is 112.00000 The number of points used in calculation is 3144-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 450528.00 The mean of the selected column is 143.29771 The standard deviation of the selected column is 1.0907507 The minimum of selected column is 141.00000 The maximum of selected column is 145.00000 The number of points used in calculation is 3144-> Converting (109.0,134.0,2.0) to g3 detector coordinates
The sum of the selected column is 520444.00 The mean of the selected column is 115.55151 The standard deviation of the selected column is 1.0963013 The minimum of selected column is 113.00000 The maximum of selected column is 118.00000 The number of points used in calculation is 4504-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 647813.00 The mean of the selected column is 143.83060 The standard deviation of the selected column is 1.1075563 The minimum of selected column is 142.00000 The maximum of selected column is 146.00000 The number of points used in calculation is 4504
1 ad12002100s000102h.evt 112850-> Fetching SIS0_NOTCHIP1.1
ad12002100s000102h.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C0 BRIGHT HIGH 28/07/94 01:10:43 0.21E+04 112850 1000
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data24/seq_proc/12002100.004/ad12002100s000102h.evt
Total Good Bad: Region Time Phase Cut
112850 101222 11628 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
112850 101222 11628 0 0 0
in 2057.76 seconds
Spectrum has 101222 counts for 49.19 counts/sec
-------------------------
MANDATORY KEYWORDS/VALUES
-------------------------
--------------------------------------------------------------------
--------------------------------------------------------------------
EXTNAME - SPECTRUM Name of this BINTABLE
TELESCOP - ASCA Mission/Satellite name
INSTRUME - SIS0 Instrument/Detector
FILTER - Instrument filter in use
EXPOSURE - 2057.8 Integration time (in secs) of PHA data
AREASCAL - 1.0000 Area scaling factor
BACKSCAL - 4.12793E-02 Background scaling factor
BACKFILE - NONE Associated background file
CORRSCAL - 1.0000 Correlation scaling factor
CORRFILE - none Associated correlation file
RESPFILE - NONE Associated redistribution matrix file
ANCRFILE - none Associated ancillary response file
XFLT0001 - none XSPEC selection filter
POISSERR - TRUE Whether Poissonian errors apply
CHANTYPE - PI Whether channels have been corrected
TLMIN1 - 0 First legal Detector channel
DETCHANS - 512 No. of legal detector channels
NCHAN - 512 No. of detector channels in dataset
PHAVERSN - 1.1.0 OGIP FITS version number
STAT_ERR - FALSE Statistical Error
SYS_ERR - TRUE Fractional Systematic Error
QUALITY - TRUE Quality Flag
GROUPING - FALSE Grouping Flag
--------------------------------------------------------------------
--------------------------------------------------------------------
... QUALITY
...
... -------
... QUALITY
... -------
... Bad Channels (Channel - Channel)
... ---------------------------------------------
... 0 - 12 have quality 5
... ---------------------------------------------
...
...... exiting, changes written to file : ad12002100s010102_1.pi
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!xsel:ASCA > read events ad12002100s000102h.evt
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!xsel:ASCA-SIS0-BRIGHT > set phaname PI
!xsel:ASCA-SIS0-BRIGHT > filter region ad12002100s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP1.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.1
!xsel:ASCA-SIS0-BRIGHT > filter region ad12002100s010102.discrim
!xsel:ASCA-SIS0-BRIGHT > extract spectrum
!xsel:ASCA-SIS0-BRIGHT > save spectrum ad12002100s010102_1.pi group=yes
Wrote spectrum to ad12002100s010102_1.pi
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no
-> Grouping ad12002100s010102_1.pi to 40 counts/bin------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS0 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 2057.8 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 4.12793E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 12 of undefined grouping (Channel quality=bad) ... 13 - 15 are grouped by a factor 3 ... 16 - 21 are grouped by a factor 2 ... 22 - 175 are single channels ... 176 - 177 are grouped by a factor 2 ... 178 - 178 are single channels ... 179 - 180 are grouped by a factor 2 ... 181 - 181 are single channels ... 182 - 197 are grouped by a factor 2 ... 198 - 221 are grouped by a factor 3 ... 222 - 231 are grouped by a factor 2 ... 232 - 237 are grouped by a factor 3 ... 238 - 243 are grouped by a factor 6 ... 244 - 253 are grouped by a factor 10 ... 254 - 265 are grouped by a factor 12 ... 266 - 285 are grouped by a factor 20 ... 286 - 335 are grouped by a factor 50 ... 336 - 511 of undefined grouping (Channel quality=bad) ... --------------------------------------------- ... ...... exiting, changes written to file : ad12002100s010102_1.pi ** grppha 2.6.0 completed successfully-> Source occupies chip(s) 0
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x512 S0C0 Bright PI RMF Calibration data from ./ Please stand by... ...Done.-> Generating ad12002100s010102_1.arf with point=no
ASCAARF vers 2.72 14 Mar 1997.
Input WMAP array has size 39 by 33 bins
expanded to 39 by 33 bins
First WMAP bin is at detector pixel 320 656
8 detector pixels per WMAP bin
WMAP bin size is 0.21600 mm
0.21216 arcmin
Selected region size is 47.566 arcmin^2
Optical axis is detector pixel 662.72 559.02
1180 energies from RMF file
Effective area fudge applied
Arf filter applied
Total counts in region = 1.01164E+05
Weighted mean angle from optical axis = 6.843 arcmin
-> Standard Output From STOOL group_event_files:1 ad12002100s000112h.evt 113097-> SIS0_NOTCHIP1.1 already present in current directory
ad12002100s000112h.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C0 BRIGHT2 HIGH 28/07/94 01:10:43 0.21E+04 113097 1000
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data24/seq_proc/12002100.004/ad12002100s000112h.evt
Total Good Bad: Region Time Phase Cut
113097 101445 11652 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
113097 101445 11652 0 0 0
in 2057.76 seconds
Spectrum has 101445 counts for 49.30 counts/sec
-------------------------
MANDATORY KEYWORDS/VALUES
-------------------------
--------------------------------------------------------------------
--------------------------------------------------------------------
EXTNAME - SPECTRUM Name of this BINTABLE
TELESCOP - ASCA Mission/Satellite name
INSTRUME - SIS0 Instrument/Detector
FILTER - Instrument filter in use
EXPOSURE - 2057.8 Integration time (in secs) of PHA data
AREASCAL - 1.0000 Area scaling factor
BACKSCAL - 4.12793E-02 Background scaling factor
BACKFILE - NONE Associated background file
CORRSCAL - 1.0000 Correlation scaling factor
CORRFILE - none Associated correlation file
RESPFILE - NONE Associated redistribution matrix file
ANCRFILE - none Associated ancillary response file
XFLT0001 - none XSPEC selection filter
POISSERR - TRUE Whether Poissonian errors apply
CHANTYPE - PI Whether channels have been corrected
TLMIN1 - 0 First legal Detector channel
DETCHANS - 1024 No. of legal detector channels
NCHAN - 1024 No. of detector channels in dataset
PHAVERSN - 1.1.0 OGIP FITS version number
STAT_ERR - FALSE Statistical Error
SYS_ERR - TRUE Fractional Systematic Error
QUALITY - TRUE Quality Flag
GROUPING - FALSE Grouping Flag
--------------------------------------------------------------------
--------------------------------------------------------------------
... QUALITY
...
... -------
... QUALITY
... -------
... Bad Channels (Channel - Channel)
... ---------------------------------------------
... 0 - 25 have quality 5
... ---------------------------------------------
...
...... exiting, changes written to file : ad12002100s010212_1.pi
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!xsel:ASCA > read events ad12002100s000112h.evt
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 4095
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!xsel:ASCA-SIS0-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad12002100s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP1.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_OFFCHIP.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad12002100s010212.discrim
!xsel:ASCA-SIS0-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS0-BRIGHT2 > save spectrum ad12002100s010212_1.pi group=yes
Wrote spectrum to ad12002100s010212_1.pi
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Grouping ad12002100s010212_1.pi to 40 counts/bin------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS0 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 2057.8 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 4.12793E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 1024 No. of legal detector channels NCHAN - 1024 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 25 of undefined grouping (Channel quality=bad) ... 26 - 31 are grouped by a factor 6 ... 32 - 40 are grouped by a factor 3 ... 41 - 44 are grouped by a factor 2 ... 45 - 280 are single channels ... 281 - 282 are grouped by a factor 2 ... 283 - 291 are single channels ... 292 - 293 are grouped by a factor 2 ... 294 - 296 are single channels ... 297 - 348 are grouped by a factor 2 ... 349 - 369 are grouped by a factor 3 ... 370 - 373 are grouped by a factor 4 ... 374 - 385 are grouped by a factor 3 ... 386 - 389 are grouped by a factor 4 ... 390 - 392 are grouped by a factor 3 ... 393 - 412 are grouped by a factor 5 ... 413 - 416 are grouped by a factor 4 ... 417 - 421 are grouped by a factor 5 ... 422 - 425 are grouped by a factor 4 ... 426 - 440 are grouped by a factor 5 ... 441 - 444 are grouped by a factor 4 ... 445 - 447 are grouped by a factor 3 ... 448 - 449 are grouped by a factor 2 ... 450 - 455 are grouped by a factor 3 ... 456 - 457 are grouped by a factor 2 ... 458 - 460 are grouped by a factor 3 ... 461 - 465 are grouped by a factor 5 ... 466 - 473 are grouped by a factor 8 ... 474 - 484 are grouped by a factor 11 ... 485 - 498 are grouped by a factor 14 ... 499 - 519 are grouped by a factor 21 ... 520 - 538 are grouped by a factor 19 ... 539 - 574 are grouped by a factor 36 ... 575 - 669 are grouped by a factor 95 ... 670 - 1023 of undefined grouping (Channel quality=bad) ... --------------------------------------------- ... ...... exiting, changes written to file : ad12002100s010212_1.pi ** grppha 2.6.0 completed successfully-> Source occupies chip(s) 0
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x1024 S0C0 Bright2 PI RMF Calibration data from ./ Please stand by... ...Done.-> Generating ad12002100s010212_1.arf with point=no
ASCAARF vers 2.72 14 Mar 1997.
Input WMAP array has size 39 by 33 bins
expanded to 39 by 33 bins
First WMAP bin is at detector pixel 320 656
8 detector pixels per WMAP bin
WMAP bin size is 0.21600 mm
0.21216 arcmin
Selected region size is 47.566 arcmin^2
Optical axis is detector pixel 662.72 559.02
1180 energies from RMF file
Effective area fudge applied
Arf filter applied
Total counts in region = 1.01387E+05
Weighted mean angle from optical axis = 6.844 arcmin
-> Standard Output From STOOL group_event_files:1 ad12002100s100102h.evt 53101-> Fetching SIS1_NOTCHIP0.1
ad12002100s100102h.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C0 BRIGHT HIGH 28/07/94 01:10:43 0.88E+03 53101 0010
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data24/seq_proc/12002100.004/ad12002100s100102h.evt
Total Good Bad: Region Time Phase Cut
53101 49501 3600 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
53101 49501 3600 0 0 0
in 883.95 seconds
Spectrum has 49501 counts for 56.00 counts/sec
-------------------------
MANDATORY KEYWORDS/VALUES
-------------------------
--------------------------------------------------------------------
--------------------------------------------------------------------
EXTNAME - SPECTRUM Name of this BINTABLE
TELESCOP - ASCA Mission/Satellite name
INSTRUME - SIS1 Instrument/Detector
FILTER - Instrument filter in use
EXPOSURE - 883.95 Integration time (in secs) of PHA data
AREASCAL - 1.0000 Area scaling factor
BACKSCAL - 4.31934E-02 Background scaling factor
BACKFILE - NONE Associated background file
CORRSCAL - 1.0000 Correlation scaling factor
CORRFILE - none Associated correlation file
RESPFILE - NONE Associated redistribution matrix file
ANCRFILE - none Associated ancillary response file
XFLT0001 - none XSPEC selection filter
POISSERR - TRUE Whether Poissonian errors apply
CHANTYPE - PI Whether channels have been corrected
TLMIN1 - 0 First legal Detector channel
DETCHANS - 512 No. of legal detector channels
NCHAN - 512 No. of detector channels in dataset
PHAVERSN - 1.1.0 OGIP FITS version number
STAT_ERR - FALSE Statistical Error
SYS_ERR - TRUE Fractional Systematic Error
QUALITY - TRUE Quality Flag
GROUPING - FALSE Grouping Flag
--------------------------------------------------------------------
--------------------------------------------------------------------
... QUALITY
...
... -------
... QUALITY
... -------
... Bad Channels (Channel - Channel)
... ---------------------------------------------
... 0 - 12 have quality 5
... ---------------------------------------------
...
...... exiting, changes written to file : ad12002100s110102_1.pi
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!xsel:ASCA > read events ad12002100s100102h.evt
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!xsel:ASCA-SIS1-BRIGHT > set phaname PI
!xsel:ASCA-SIS1-BRIGHT > filter region ad12002100s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP3.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.1
!xsel:ASCA-SIS1-BRIGHT > filter region ad12002100s110102.discrim
!xsel:ASCA-SIS1-BRIGHT > extract spectrum
!xsel:ASCA-SIS1-BRIGHT > save spectrum ad12002100s110102_1.pi group=yes
Wrote spectrum to ad12002100s110102_1.pi
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no
-> Grouping ad12002100s110102_1.pi to 40 counts/bin------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS1 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 883.95 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 4.31934E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 12 of undefined grouping (Channel quality=bad) ... 13 - 31 are grouped by a factor 19 ... 32 - 142 are single channels ... 143 - 144 are grouped by a factor 2 ... 145 - 147 are single channels ... 148 - 149 are grouped by a factor 2 ... 150 - 155 are single channels ... 156 - 157 are grouped by a factor 2 ... 158 - 158 are single channels ... 159 - 174 are grouped by a factor 2 ... 175 - 186 are grouped by a factor 3 ... 187 - 190 are grouped by a factor 4 ... 191 - 196 are grouped by a factor 3 ... 197 - 200 are grouped by a factor 4 ... 201 - 220 are grouped by a factor 5 ... 221 - 223 are grouped by a factor 3 ... 224 - 225 are grouped by a factor 2 ... 226 - 231 are grouped by a factor 3 ... 232 - 238 are grouped by a factor 7 ... 239 - 251 are grouped by a factor 13 ... 252 - 265 are grouped by a factor 14 ... 266 - 292 are grouped by a factor 27 ... 293 - 511 of undefined grouping (Channel quality=bad) ... --------------------------------------------- ... ...... exiting, changes written to file : ad12002100s110102_1.pi ** grppha 2.6.0 completed successfully-> Source occupies chip(s) 2
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x512 S1C2 Bright PI RMF Calibration data from ./ Please stand by... ...Done.-> Generating ad12002100s110102_1.arf with point=no
ASCAARF vers 2.72 14 Mar 1997.
Input WMAP array has size 37 by 38 bins
expanded to 37 by 38 bins
First WMAP bin is at detector pixel 336 656
8 detector pixels per WMAP bin
WMAP bin size is 0.21600 mm
0.21216 arcmin
Selected region size is 49.772 arcmin^2
Optical axis is detector pixel 618.28 773.83
1180 energies from RMF file
Effective area fudge applied
Arf filter applied
Total counts in region = 4.94440E+04
Weighted mean angle from optical axis = 3.303 arcmin
-> Standard Output From STOOL group_event_files:1 ad12002100s100112h.evt 53134-> SIS1_NOTCHIP0.1 already present in current directory
ad12002100s100112h.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C0 BRIGHT2 HIGH 28/07/94 01:10:43 0.88E+03 53134 0010
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data24/seq_proc/12002100.004/ad12002100s100112h.evt
Total Good Bad: Region Time Phase Cut
53134 49551 3583 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
53134 49551 3583 0 0 0
in 883.95 seconds
Spectrum has 49551 counts for 56.06 counts/sec
-------------------------
MANDATORY KEYWORDS/VALUES
-------------------------
--------------------------------------------------------------------
--------------------------------------------------------------------
EXTNAME - SPECTRUM Name of this BINTABLE
TELESCOP - ASCA Mission/Satellite name
INSTRUME - SIS1 Instrument/Detector
FILTER - Instrument filter in use
EXPOSURE - 883.95 Integration time (in secs) of PHA data
AREASCAL - 1.0000 Area scaling factor
BACKSCAL - 4.31934E-02 Background scaling factor
BACKFILE - NONE Associated background file
CORRSCAL - 1.0000 Correlation scaling factor
CORRFILE - none Associated correlation file
RESPFILE - NONE Associated redistribution matrix file
ANCRFILE - none Associated ancillary response file
XFLT0001 - none XSPEC selection filter
POISSERR - TRUE Whether Poissonian errors apply
CHANTYPE - PI Whether channels have been corrected
TLMIN1 - 0 First legal Detector channel
DETCHANS - 1024 No. of legal detector channels
NCHAN - 1024 No. of detector channels in dataset
PHAVERSN - 1.1.0 OGIP FITS version number
STAT_ERR - FALSE Statistical Error
SYS_ERR - TRUE Fractional Systematic Error
QUALITY - TRUE Quality Flag
GROUPING - FALSE Grouping Flag
--------------------------------------------------------------------
--------------------------------------------------------------------
... QUALITY
...
... -------
... QUALITY
... -------
... Bad Channels (Channel - Channel)
... ---------------------------------------------
... 0 - 25 have quality 5
... ---------------------------------------------
...
...... exiting, changes written to file : ad12002100s110212_1.pi
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!xsel:ASCA > read events ad12002100s100112h.evt
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 4095
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!xsel:ASCA-SIS1-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad12002100s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP3.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_OFFCHIP.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad12002100s110212.discrim
!xsel:ASCA-SIS1-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS1-BRIGHT2 > save spectrum ad12002100s110212_1.pi group=yes
Wrote spectrum to ad12002100s110212_1.pi
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Grouping ad12002100s110212_1.pi to 40 counts/bin------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS1 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 883.95 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 4.31934E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 1024 No. of legal detector channels NCHAN - 1024 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 25 of undefined grouping (Channel quality=bad) ... 26 - 62 are grouped by a factor 37 ... 63 - 224 are single channels ... 225 - 226 are grouped by a factor 2 ... 227 - 231 are single channels ... 232 - 233 are grouped by a factor 2 ... 234 - 234 are single channels ... 235 - 236 are grouped by a factor 2 ... 237 - 239 are single channels ... 240 - 241 are grouped by a factor 2 ... 242 - 242 are single channels ... 243 - 244 are grouped by a factor 2 ... 245 - 250 are single channels ... 251 - 256 are grouped by a factor 2 ... 257 - 259 are single channels ... 260 - 261 are grouped by a factor 2 ... 262 - 264 are single channels ... 265 - 266 are grouped by a factor 2 ... 267 - 267 are single channels ... 268 - 269 are grouped by a factor 2 ... 270 - 271 are single channels ... 272 - 285 are grouped by a factor 2 ... 286 - 288 are grouped by a factor 3 ... 289 - 306 are grouped by a factor 2 ... 307 - 309 are grouped by a factor 3 ... 310 - 311 are grouped by a factor 2 ... 312 - 341 are grouped by a factor 3 ... 342 - 345 are grouped by a factor 4 ... 346 - 348 are grouped by a factor 3 ... 349 - 352 are grouped by a factor 4 ... 353 - 357 are grouped by a factor 5 ... 358 - 361 are grouped by a factor 4 ... 362 - 371 are grouped by a factor 5 ... 372 - 383 are grouped by a factor 6 ... 384 - 387 are grouped by a factor 4 ... 388 - 393 are grouped by a factor 6 ... 394 - 400 are grouped by a factor 7 ... 401 - 409 are grouped by a factor 9 ... 410 - 417 are grouped by a factor 8 ... 418 - 426 are grouped by a factor 9 ... 427 - 437 are grouped by a factor 11 ... 438 - 443 are grouped by a factor 6 ... 444 - 453 are grouped by a factor 5 ... 454 - 457 are grouped by a factor 4 ... 458 - 462 are grouped by a factor 5 ... 463 - 475 are grouped by a factor 13 ... 476 - 497 are grouped by a factor 22 ... 498 - 525 are grouped by a factor 28 ... 526 - 561 are grouped by a factor 36 ... 562 - 1023 of undefined grouping (Channel quality=bad) ... --------------------------------------------- ... ...... exiting, changes written to file : ad12002100s110212_1.pi ** grppha 2.6.0 completed successfully-> Source occupies chip(s) 2
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x1024 S1C2 Bright2 PI RMF Calibration data from ./ Please stand by... ...Done.-> Generating ad12002100s110212_1.arf with point=no
ASCAARF vers 2.72 14 Mar 1997.
Input WMAP array has size 37 by 38 bins
expanded to 37 by 38 bins
First WMAP bin is at detector pixel 336 656
8 detector pixels per WMAP bin
WMAP bin size is 0.21600 mm
0.21216 arcmin
Selected region size is 49.772 arcmin^2
Optical axis is detector pixel 618.28 773.83
1180 energies from RMF file
Effective area fudge applied
Arf filter applied
Total counts in region = 4.94940E+04
Weighted mean angle from optical axis = 3.303 arcmin
-> Standard Output From STOOL group_event_files:1 ad12002100g200170h.evt 138938-> GIS2_REGION256.4 already present in current directory
ad12002100g200170h.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C0 PH HIGH 28/07/94 01:10:55 0.28E+04 138938 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data24/seq_proc/12002100.004/ad12002100g200170h.evt
Total Good Bad: Region Time Phase Cut
138938 117120 21818 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
138938 117120 21818 0 0 0
in 2765.97 seconds
Spectrum has 117120 counts for 42.34 counts/sec
-------------------------
MANDATORY KEYWORDS/VALUES
-------------------------
--------------------------------------------------------------------
--------------------------------------------------------------------
EXTNAME - SPECTRUM Name of this BINTABLE
TELESCOP - ASCA Mission/Satellite name
INSTRUME - GIS2 Instrument/Detector
FILTER - Instrument filter in use
EXPOSURE - 2766.0 Integration time (in secs) of PHA data
AREASCAL - 1.0000 Area scaling factor
BACKSCAL - 2.90070E-02 Background scaling factor
BACKFILE - NONE Associated background file
CORRSCAL - 1.0000 Correlation scaling factor
CORRFILE - none Associated correlation file
RESPFILE - NONE Associated redistribution matrix file
ANCRFILE - none Associated ancillary response file
XFLT0001 - none XSPEC selection filter
POISSERR - TRUE Whether Poissonian errors apply
CHANTYPE - PI Whether channels have been corrected
TLMIN1 - 0 First legal Detector channel
DETCHANS - 1024 No. of legal detector channels
NCHAN - 1024 No. of detector channels in dataset
PHAVERSN - 1992a OGIP FITS version number
STAT_ERR - FALSE Statistical Error
SYS_ERR - TRUE Fractional Systematic Error
QUALITY - TRUE Quality Flag
GROUPING - FALSE Grouping Flag
--------------------------------------------------------------------
--------------------------------------------------------------------
...
... --------
... GROUPING
... --------
... ---------------------------------------------
... Channel Grouping (Channel-Channel) :
... ---------------------------------------------
...
...... exiting, changes written to file : ad12002100g210170_1.pi
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!xsel:ASCA > read events ad12002100g200170h.evt
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!xsel:ASCA-GIS2-PH > set phaname PI
!xsel:ASCA-GIS2-PH > filter region ad12002100g225670_1.reg
!xsel:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!xsel:ASCA-GIS2-PH > extract spectrum
!xsel:ASCA-GIS2-PH > save spectrum ad12002100g210170_1.pi group=yes
Wrote spectrum to ad12002100g210170_1.pi
!xsel:ASCA-GIS2-PH > exit save_session=no
-> Correcting ad12002100g210170_1.pi for dead time... read all the files from deadlist.tmp-> Grouping ad12002100g210170_1.pi to 40 counts/bin
------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - GIS2 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 2766.0 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.90070E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 1024 No. of legal detector channels NCHAN - 1024 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - TRUE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 21 are grouped by a factor 22 ... 22 - 23 are grouped by a factor 2 ... 24 - 29 are single channels ... 30 - 33 are grouped by a factor 2 ... 34 - 349 are single channels ... 350 - 351 are grouped by a factor 2 ... 352 - 354 are single channels ... 355 - 356 are grouped by a factor 2 ... 357 - 362 are single channels ... 363 - 364 are grouped by a factor 2 ... 365 - 366 are single channels ... 367 - 368 are grouped by a factor 2 ... 369 - 369 are single channels ... 370 - 383 are grouped by a factor 2 ... 384 - 385 are single channels ... 386 - 389 are grouped by a factor 2 ... 390 - 390 are single channels ... 391 - 402 are grouped by a factor 2 ... 403 - 404 are single channels ... 405 - 456 are grouped by a factor 2 ... 457 - 459 are grouped by a factor 3 ... 460 - 461 are grouped by a factor 2 ... 462 - 464 are grouped by a factor 3 ... 465 - 466 are grouped by a factor 2 ... 467 - 481 are grouped by a factor 3 ... 482 - 483 are grouped by a factor 2 ... 484 - 489 are grouped by a factor 3 ... 490 - 493 are grouped by a factor 4 ... 494 - 499 are grouped by a factor 3 ... 500 - 507 are grouped by a factor 4 ... 508 - 519 are grouped by a factor 3 ... 520 - 523 are grouped by a factor 4 ... 524 - 535 are grouped by a factor 3 ... 536 - 541 are grouped by a factor 2 ... 542 - 544 are grouped by a factor 3 ... 545 - 570 are grouped by a factor 2 ... 571 - 573 are grouped by a factor 3 ... 574 - 575 are grouped by a factor 2 ... 576 - 587 are grouped by a factor 3 ... 588 - 597 are grouped by a factor 5 ... 598 - 603 are grouped by a factor 6 ... 604 - 627 are grouped by a factor 8 ... 628 - 636 are grouped by a factor 9 ... 637 - 649 are grouped by a factor 13 ... 650 - 660 are grouped by a factor 11 ... 661 - 684 are grouped by a factor 12 ... 685 - 720 are grouped by a factor 18 ... 721 - 743 are grouped by a factor 23 ... 744 - 776 are grouped by a factor 33 ... 777 - 834 are grouped by a factor 58 ... 835 - 922 are grouped by a factor 88 ... 923 - 1023 of undefined grouping (Channel quality=bad) ... --------------------------------------------- ... ...... exiting, changes written to file : ad12002100g210170_1.pi ** grppha 2.6.0 completed successfully-> Fetching gis2v4_0.rmf
ASCAARF vers 2.72 14 Mar 1997.
Input WMAP array has size 49 by 49 bins
expanded to 128 by 128 bins
First WMAP bin is at detector pixel 48 81
1 detector pixels per WMAP bin
WMAP bin size is 0.25000 mm
0.24555 arcmin
Selected region size is 114.65 arcmin^2
Optical axis is detector pixel 133.00 130.96
201 energies from RMF file
Effective area fudge applied
Arf filter applied
Total counts in region = 1.17120E+05
Weighted mean angle from optical axis = 5.975 arcmin
-> Standard Output From STOOL group_event_files:1 ad12002100g300170h.evt 158128-> GIS3_REGION256.4 already present in current directory
ad12002100g300170h.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C0 PH HIGH 28/07/94 01:10:55 0.28E+04 158128 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data24/seq_proc/12002100.004/ad12002100g300170h.evt
Total Good Bad: Region Time Phase Cut
158128 137891 20237 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
158128 137891 20237 0 0 0
in 2767.97 seconds
Spectrum has 137891 counts for 49.82 counts/sec
-------------------------
MANDATORY KEYWORDS/VALUES
-------------------------
--------------------------------------------------------------------
--------------------------------------------------------------------
EXTNAME - SPECTRUM Name of this BINTABLE
TELESCOP - ASCA Mission/Satellite name
INSTRUME - GIS3 Instrument/Detector
FILTER - Instrument filter in use
EXPOSURE - 2768.0 Integration time (in secs) of PHA data
AREASCAL - 1.0000 Area scaling factor
BACKSCAL - 2.90070E-02 Background scaling factor
BACKFILE - NONE Associated background file
CORRSCAL - 1.0000 Correlation scaling factor
CORRFILE - none Associated correlation file
RESPFILE - NONE Associated redistribution matrix file
ANCRFILE - none Associated ancillary response file
XFLT0001 - none XSPEC selection filter
POISSERR - TRUE Whether Poissonian errors apply
CHANTYPE - PI Whether channels have been corrected
TLMIN1 - 0 First legal Detector channel
DETCHANS - 1024 No. of legal detector channels
NCHAN - 1024 No. of detector channels in dataset
PHAVERSN - 1992a OGIP FITS version number
STAT_ERR - FALSE Statistical Error
SYS_ERR - TRUE Fractional Systematic Error
QUALITY - TRUE Quality Flag
GROUPING - FALSE Grouping Flag
--------------------------------------------------------------------
--------------------------------------------------------------------
...
... --------
... GROUPING
... --------
... ---------------------------------------------
... Channel Grouping (Channel-Channel) :
... ---------------------------------------------
...
...... exiting, changes written to file : ad12002100g310170_1.pi
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!xsel:ASCA > read events ad12002100g300170h.evt
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!xsel:ASCA-GIS3-PH > set phaname PI
!xsel:ASCA-GIS3-PH > filter region ad12002100g325670_1.reg
!xsel:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!xsel:ASCA-GIS3-PH > extract spectrum
!xsel:ASCA-GIS3-PH > save spectrum ad12002100g310170_1.pi group=yes
Wrote spectrum to ad12002100g310170_1.pi
!xsel:ASCA-GIS3-PH > exit save_session=no
-> Correcting ad12002100g310170_1.pi for dead time... read all the files from deadlist.tmp-> Grouping ad12002100g310170_1.pi to 40 counts/bin
------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - GIS3 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 2768.0 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.90070E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 1024 No. of legal detector channels NCHAN - 1024 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - TRUE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 20 are grouped by a factor 21 ... 21 - 373 are single channels ... 374 - 375 are grouped by a factor 2 ... 376 - 377 are single channels ... 378 - 379 are grouped by a factor 2 ... 380 - 380 are single channels ... 381 - 382 are grouped by a factor 2 ... 383 - 385 are single channels ... 386 - 387 are grouped by a factor 2 ... 388 - 388 are single channels ... 389 - 392 are grouped by a factor 2 ... 393 - 396 are single channels ... 397 - 398 are grouped by a factor 2 ... 399 - 400 are single channels ... 401 - 402 are grouped by a factor 2 ... 403 - 403 are single channels ... 404 - 405 are grouped by a factor 2 ... 406 - 406 are single channels ... 407 - 410 are grouped by a factor 2 ... 411 - 411 are single channels ... 412 - 423 are grouped by a factor 2 ... 424 - 424 are single channels ... 425 - 470 are grouped by a factor 2 ... 471 - 473 are grouped by a factor 3 ... 474 - 475 are grouped by a factor 2 ... 476 - 484 are grouped by a factor 3 ... 485 - 486 are grouped by a factor 2 ... 487 - 507 are grouped by a factor 3 ... 508 - 515 are grouped by a factor 4 ... 516 - 524 are grouped by a factor 3 ... 525 - 526 are grouped by a factor 2 ... 527 - 532 are grouped by a factor 3 ... 533 - 572 are grouped by a factor 2 ... 573 - 575 are grouped by a factor 3 ... 576 - 577 are grouped by a factor 2 ... 578 - 586 are grouped by a factor 3 ... 587 - 598 are grouped by a factor 4 ... 599 - 608 are grouped by a factor 5 ... 609 - 615 are grouped by a factor 7 ... 616 - 621 are grouped by a factor 6 ... 622 - 628 are grouped by a factor 7 ... 629 - 636 are grouped by a factor 8 ... 637 - 657 are grouped by a factor 7 ... 658 - 675 are grouped by a factor 9 ... 676 - 687 are grouped by a factor 12 ... 688 - 703 are grouped by a factor 16 ... 704 - 721 are grouped by a factor 18 ... 722 - 743 are grouped by a factor 22 ... 744 - 768 are grouped by a factor 25 ... 769 - 796 are grouped by a factor 28 ... 797 - 831 are grouped by a factor 35 ... 832 - 882 are grouped by a factor 51 ... 883 - 1023 of undefined grouping (Channel quality=bad) ... --------------------------------------------- ... ...... exiting, changes written to file : ad12002100g310170_1.pi ** grppha 2.6.0 completed successfully-> Fetching gis3v4_0.rmf
ASCAARF vers 2.72 14 Mar 1997.
Input WMAP array has size 49 by 49 bins
expanded to 128 by 128 bins
First WMAP bin is at detector pixel 54 82
1 detector pixels per WMAP bin
WMAP bin size is 0.25000 mm
0.24555 arcmin
Selected region size is 114.65 arcmin^2
Optical axis is detector pixel 119.36 134.44
201 energies from RMF file
Effective area fudge applied
Arf filter applied
Total counts in region = 1.37891E+05
Weighted mean angle from optical axis = 3.267 arcmin
-> Plotting ad12002100g210170_1_pi.ps from ad12002100g210170_1.pi
XSPEC 9.01 03:48:19 23-Mar-98
Plot device not set, use "cpd" to set it
Type "help" or "?" for further information
!XSPEC> data ad12002100g210170_1.pi
Net count rate (cts/s) for file 1 42.34 +/- 0.1238
1 data set is in use
!XSPEC> setplot energy
!XSPEC> ignore bad
!XSPEC> iplot
!PLT> log y on
!PLT> rescale y
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
XSPEC: quit
-> Plotting ad12002100g310170_1_pi.ps from ad12002100g310170_1.pi
XSPEC 9.01 03:48:35 23-Mar-98
Plot device not set, use "cpd" to set it
Type "help" or "?" for further information
!XSPEC> data ad12002100g310170_1.pi
Net count rate (cts/s) for file 1 49.82 +/- 0.1342
1 data set is in use
!XSPEC> setplot energy
!XSPEC> ignore bad
!XSPEC> iplot
!PLT> log y on
!PLT> rescale y
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
XSPEC: quit
-> Plotting ad12002100s010102_1_pi.ps from ad12002100s010102_1.pi
XSPEC 9.01 03:48:48 23-Mar-98
Plot device not set, use "cpd" to set it
Type "help" or "?" for further information
!XSPEC> data ad12002100s010102_1.pi
Net count rate (cts/s) for file 1 49.19 +/- 0.1548
1 data set is in use
!XSPEC> setplot energy
!XSPEC> ignore bad
!XSPEC> iplot
!PLT> log y on
!PLT> rescale y
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
XSPEC: quit
-> Plotting ad12002100s010212_1_pi.ps from ad12002100s010212_1.pi
XSPEC 9.01 03:49:02 23-Mar-98
Plot device not set, use "cpd" to set it
Type "help" or "?" for further information
!XSPEC> data ad12002100s010212_1.pi
Net count rate (cts/s) for file 1 49.30 +/- 0.1551
1 data set is in use
!XSPEC> setplot energy
!XSPEC> ignore bad
!XSPEC> iplot
!PLT> log y on
!PLT> rescale y
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
XSPEC: quit
-> Plotting ad12002100s110102_1_pi.ps from ad12002100s110102_1.pi
XSPEC 9.01 03:49:18 23-Mar-98
Plot device not set, use "cpd" to set it
Type "help" or "?" for further information
!XSPEC> data ad12002100s110102_1.pi
Net count rate (cts/s) for file 1 56.00 +/- 0.2522
1 data set is in use
!XSPEC> setplot energy
!XSPEC> ignore bad
!XSPEC> iplot
!PLT> log y on
!PLT> rescale y
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
XSPEC: quit
-> Plotting ad12002100s110212_1_pi.ps from ad12002100s110212_1.pi
XSPEC 9.01 03:49:34 23-Mar-98
Plot device not set, use "cpd" to set it
Type "help" or "?" for further information
!XSPEC> data ad12002100s110212_1.pi
Net count rate (cts/s) for file 1 56.06 +/- 0.2530
1 data set is in use
!XSPEC> setplot energy
!XSPEC> ignore bad
!XSPEC> iplot
!PLT> log y on
!PLT> rescale y
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
XSPEC: quit
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C0 BRIGHT HIGH 28/07/94 01:10:43 0.21E+04 112850 1000
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data24/seq_proc/12002100.004/ad12002100s000102h.evt
Total Good Bad: Region Time Phase Cut
112850 101647 11203 0 0 0
Writing events file
101647 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
112850 101647 11203 0 0 0
in 2057.76 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!xsel:ASCA > read events ad12002100s000102h.evt
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!xsel:ASCA-SIS0-BRIGHT > filter region ad12002100s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
/data/data24/seq_proc/12002100.004/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no
-> Extracting ad12002100s000002_1.lc with binsize 4.0000000000E+00
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C0 BRIGHT HIGH 28/07/94 01:10:43 0.21E+04 101647 1000
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data24/seq_proc/12002100.004/events.tmp
Total Good Bad: Region Time Phase Cut
101647 101647 0 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
101647 101647 0 0 0 0
in 2057.76 seconds
Fits light curve has 101647 counts for 49.40 counts/sec
Thresholding removed significant counts
Try exposure=0.0 on the extract command in xselect
or lcthresh=0.0 if running extractor stand-alone
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!xsel:ASCA > read events events.tmp
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!xsel:ASCA-SIS0-BRIGHT > set binsize 4.0000000000E+00
!xsel:ASCA-SIS0-BRIGHT > extract curve exposure=0.5
!xsel:ASCA-SIS0-BRIGHT > save curve ad12002100s000002_1.lc
Wrote FITS light curve to file ad12002100s000002_1.lc
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no
-> Plotting light curve ad12002100s000002_1_lc.ps
Type "help" for information
[1]xronos> Current User Interface is ; command driven
[2]xronos> Enter up to 50 input filenames and options for series 1 (or rtn)
Ser. A filename 1 +options[.rbf]=> ad12002100s000002_1.lc
Selected FITS extensions: 1 - RATE TABLE;
Source ............ CAS_A_C0(o) Start Time (d) .... 9561 01:19:21.952
FITS Extension .... 1 - `RATE ` Stop Time (d) ..... 9561 03:27:21.952
No. of Rows ....... 516 Bin Time (s) ...... 4.000
Right Ascension ... 3.5073E+02 Internal time sys.. Converted to TJD
Declination ....... 5.8782E+01 Experiment ........ ASCA SIS0
Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
Selected Columns: 1 - Time; 2 - Y-axis; 3 - Y-error;
File contains binned data.
Ser. A filename 2 +options[.rbf]=>
Enter up to 50 input filenames and options for series 2 (or rtn)
Ser. B filename 1 +options[.rbf]=>
Enter up to 50 input filenames and options for series 3 (or rtn)
Ser. C filename 1 +options[.rbf]=>
[3]xronos>
Maximum of 1 Intvs. with 512 Newbins of 15.0176 (s)
Intv 1 Start 9561 1:19:29
Ser.1 Avg 49.70 Chisq 202.2 Var 8.506 Newbs. 145
Min 45.25 Max 71.66 expVar 3.937 Bins 516
Results from Statistical Analysis
Newbin Integration Time (s).. 15.018
Interval Duration (s)........ 7674.0
No. of Newbins .............. 145
Average (c/s) ............... 49.700 +/- 0.17
Standard Deviation (c/s)..... 2.9165
Minimum (c/s)................ 45.250
Maximum (c/s)................ 71.660
Variance ((c/s)**2).......... 8.5060 +/- 1.0
Expected Variance ((c/s)**2). 3.9365 +/- 0.46
Third Moment ((c/s)**3)...... 94.759
Average Deviation (c/s)...... 1.6771
Skewness..................... 3.8197 +/- 0.20
Kurtosis..................... 23.068 +/- 0.41
RMS fractional variation..... 0.43010E-01 +/- 0.47E-02
Chi-Square................... 202.16 dof 144
Chi-Square Prob of constancy. 0.10036E-02 (0 means < 1.e-38)
Kolm.-Smir. Prob of constancy 0.45404E-02 (0 means < 1.e-38)
[4]xronos> [5]xronos>
Maximum of 1 Intvs. with 512 Newbins of 15.0176 (s)
Intv 1 Start 9561 1:19:29
Ser.1 Avg 49.70 Chisq 202.2 Var 8.506 Newbs. 145
Min 45.25 Max 71.66 expVar 3.937 Bins 516
Light curve ready !
Frme 1 Written to output file : xronos.qlc1
PLT> PLT> PLT> [6]xronos>
-> TIMEDEL=4.0000000000E+00 for ad12002100s100102h.evt
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C0 BRIGHT HIGH 28/07/94 01:10:43 0.88E+03 53101 0010
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data24/seq_proc/12002100.004/ad12002100s100102h.evt
Total Good Bad: Region Time Phase Cut
53101 49543 3558 0 0 0
Writing events file
49543 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
53101 49543 3558 0 0 0
in 883.95 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!xsel:ASCA > read events ad12002100s100102h.evt
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!xsel:ASCA-SIS1-BRIGHT > filter region ad12002100s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
/data/data24/seq_proc/12002100.004/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no
-> Extracting ad12002100s100002_1.lc with binsize 4.0000000000E+00
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C0 BRIGHT HIGH 28/07/94 01:10:43 0.88E+03 49543 0010
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data24/seq_proc/12002100.004/events.tmp
Total Good Bad: Region Time Phase Cut
49543 49543 0 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
49543 49543 0 0 0 0
in 883.95 seconds
Fits light curve has 49543 counts for 56.05 counts/sec
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!xsel:ASCA > read events events.tmp
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!xsel:ASCA-SIS1-BRIGHT > set binsize 4.0000000000E+00
!xsel:ASCA-SIS1-BRIGHT > extract curve exposure=0.5
!xsel:ASCA-SIS1-BRIGHT > save curve ad12002100s100002_1.lc
Wrote FITS light curve to file ad12002100s100002_1.lc
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no
-> Plotting light curve ad12002100s100002_1_lc.ps
Type "help" for information
[1]xronos> Current User Interface is ; command driven
[2]xronos> Enter up to 50 input filenames and options for series 1 (or rtn)
Ser. A filename 1 +options[.rbf]=> ad12002100s100002_1.lc
Selected FITS extensions: 1 - RATE TABLE;
Source ............ CAS_A_C0(o) Start Time (d) .... 9561 01:19:21.952
FITS Extension .... 1 - `RATE ` Stop Time (d) ..... 9561 03:27:21.952
No. of Rows ....... 221 Bin Time (s) ...... 4.000
Right Ascension ... 3.5073E+02 Internal time sys.. Converted to TJD
Declination ....... 5.8782E+01 Experiment ........ ASCA SIS1
Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
Selected Columns: 1 - Time; 2 - Y-axis; 3 - Y-error;
File contains binned data.
Ser. A filename 2 +options[.rbf]=>
Enter up to 50 input filenames and options for series 2 (or rtn)
Ser. B filename 1 +options[.rbf]=>
Enter up to 50 input filenames and options for series 3 (or rtn)
Ser. C filename 1 +options[.rbf]=>
[3]xronos>
Maximum of 1 Intvs. with 512 Newbins of 15.0176 (s)
Intv 1 Start 9561 1:19:29
Ser.1 Avg 56.04 Chisq 20.30 Var 1.752 Newbs. 72
Min 51.92 Max 58.50 expVar 5.790 Bins 221
Results from Statistical Analysis
Newbin Integration Time (s).. 15.018
Interval Duration (s)........ 7674.0
No. of Newbins .............. 72
Average (c/s) ............... 56.040 +/- 0.29
Standard Deviation (c/s)..... 1.3236
Minimum (c/s)................ 51.917
Maximum (c/s)................ 58.500
Variance ((c/s)**2).......... 1.7520 +/- 0.29
Expected Variance ((c/s)**2). 5.7898 +/- 0.97
Third Moment ((c/s)**3)...... -1.3268
Average Deviation (c/s)...... 1.0288
Skewness.....................-0.57213 +/- 0.29
Kurtosis..................... 0.31116 +/- 0.58
RMS fractional variation....< 0.48504E-01 (3 sigma)
Chi-Square................... 20.303 dof 71
Chi-Square Prob of constancy. 1.0000 (0 means < 1.e-38)
Kolm.-Smir. Prob of constancy 0.84694 (0 means < 1.e-38)
[4]xronos> [5]xronos>
Maximum of 1 Intvs. with 512 Newbins of 15.0176 (s)
Intv 1 Start 9561 1:19:29
Ser.1 Avg 56.04 Chisq 20.30 Var 1.752 Newbs. 72
Min 51.92 Max 58.50 expVar 5.790 Bins 221
Light curve ready !
Frme 1 Written to output file : xronos.qlc1
PLT> PLT> PLT> [6]xronos>
-> TIMEDEL=6.2500000000E-02 for ad12002100g200170h.evt
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C0 PH HIGH 28/07/94 01:10:55 0.28E+04 138938 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data24/seq_proc/12002100.004/ad12002100g200170h.evt
Total Good Bad: Region Time Phase Cut
138938 117120 21818 0 0 0
Writing events file
117120 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
138938 117120 21818 0 0 0
in 2765.97 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!xsel:ASCA > read events ad12002100g200170h.evt
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!xsel:ASCA-GIS2-PH > filter region ad12002100g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
/data/data24/seq_proc/12002100.004/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no
-> Extracting ad12002100g200070_1.lc with binsize 1.18082845654489
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C0 PH HIGH 28/07/94 01:10:55 0.28E+04 117120 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data24/seq_proc/12002100.004/events.tmp
Total Good Bad: Region Time Phase Cut
117120 117120 0 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
117120 117120 0 0 0 0
in 2765.97 seconds
Fits light curve has 117120 counts for 42.34 counts/sec
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!xsel:ASCA > read events events.tmp
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!xsel:ASCA-GIS2-PH > set binsize 1.18082845654489
!xsel:ASCA-GIS2-PH > extract curve exposure=0.5
!xsel:ASCA-GIS2-PH > save curve ad12002100g200070_1.lc
Wrote FITS light curve to file ad12002100g200070_1.lc
!xsel:ASCA-GIS2-PH > exit save_session=no
-> Plotting light curve ad12002100g200070_1_lc.ps
Type "help" for information
[1]xronos> Current User Interface is ; command driven
[2]xronos> Enter up to 50 input filenames and options for series 1 (or rtn)
Ser. A filename 1 +options[.rbf]=> ad12002100g200070_1.lc
Selected FITS extensions: 1 - RATE TABLE;
Source ............ CAS_A_C0(o) Start Time (d) .... 9561 01:10:55.951
FITS Extension .... 1 - `RATE ` Stop Time (d) ..... 9561 03:24:37.924
No. of Rows ....... 2340 Bin Time (s) ...... 1.181
Right Ascension ... 3.5073E+02 Internal time sys.. Converted to TJD
Declination ....... 5.8782E+01 Experiment ........ ASCA GIS2
Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
Selected Columns: 1 - Time; 2 - Y-axis; 3 - Y-error;
File contains binned data.
Ser. A filename 2 +options[.rbf]=>
Enter up to 50 input filenames and options for series 2 (or rtn)
Ser. B filename 1 +options[.rbf]=>
Enter up to 50 input filenames and options for series 3 (or rtn)
Ser. C filename 1 +options[.rbf]=>
[3]xronos>
Maximum of 1 Intvs. with 512 Newbins of 15.6863 (s)
Intv 1 Start 9561 1:11: 3
Ser.1 Avg 42.34 Chisq 136.9 Var 2.804 Newbs. 187
Min 35.85 Max 46.52 expVar 3.752 Bins 2340
Results from Statistical Analysis
Newbin Integration Time (s).. 15.686
Interval Duration (s)........ 8015.7
No. of Newbins .............. 187
Average (c/s) ............... 42.339 +/- 0.14
Standard Deviation (c/s)..... 1.6746
Minimum (c/s)................ 35.851
Maximum (c/s)................ 46.517
Variance ((c/s)**2).......... 2.8042 +/- 0.29
Expected Variance ((c/s)**2). 3.7523 +/- 0.39
Third Moment ((c/s)**3)......-0.97288
Average Deviation (c/s)...... 1.3149
Skewness.....................-0.20717 +/- 0.18
Kurtosis..................... 0.54683 +/- 0.36
RMS fractional variation....< 0.35220E-01 (3 sigma)
Chi-Square................... 136.94 dof 186
Chi-Square Prob of constancy. 0.99723 (0 means < 1.e-38)
Kolm.-Smir. Prob of constancy 0.57049E-01 (0 means < 1.e-38)
[4]xronos> [5]xronos>
Maximum of 1 Intvs. with 512 Newbins of 15.6863 (s)
Intv 1 Start 9561 1:11: 3
Ser.1 Avg 42.34 Chisq 136.9 Var 2.804 Newbs. 187
Min 35.85 Max 46.52 expVar 3.752 Bins 2340
Light curve ready !
Frme 1 Written to output file : xronos.qlc1
PLT> PLT> PLT> [6]xronos>
-> TIMEDEL=6.2500000000E-02 for ad12002100g300170h.evt
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C0 PH HIGH 28/07/94 01:10:55 0.28E+04 158128 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data24/seq_proc/12002100.004/ad12002100g300170h.evt
Total Good Bad: Region Time Phase Cut
158128 137891 20237 0 0 0
Writing events file
137891 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
158128 137891 20237 0 0 0
in 2767.97 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!xsel:ASCA > read events ad12002100g300170h.evt
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!xsel:ASCA-GIS3-PH > filter region ad12002100g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
/data/data24/seq_proc/12002100.004/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no
-> Extracting ad12002100g300070_1.lc with binsize 1.0036813751557
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C0 PH HIGH 28/07/94 01:10:55 0.28E+04 137891 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data24/seq_proc/12002100.004/events.tmp
Total Good Bad: Region Time Phase Cut
137891 137891 0 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
137891 137891 0 0 0 0
in 2767.97 seconds
Fits light curve has 137891 counts for 49.82 counts/sec
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!xsel:ASCA > read events events.tmp
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!xsel:ASCA-GIS3-PH > set binsize 1.0036813751557
!xsel:ASCA-GIS3-PH > extract curve exposure=0.5
!xsel:ASCA-GIS3-PH > save curve ad12002100g300070_1.lc
Wrote FITS light curve to file ad12002100g300070_1.lc
!xsel:ASCA-GIS3-PH > exit save_session=no
-> Plotting light curve ad12002100g300070_1_lc.ps
Type "help" for information
[1]xronos> Current User Interface is ; command driven
[2]xronos> Enter up to 50 input filenames and options for series 1 (or rtn)
Ser. A filename 1 +options[.rbf]=> ad12002100g300070_1.lc
Selected FITS extensions: 1 - RATE TABLE;
Source ............ CAS_A_C0(o) Start Time (d) .... 9561 01:10:55.951
FITS Extension .... 1 - `RATE ` Stop Time (d) ..... 9561 03:24:37.924
No. of Rows ....... 2758 Bin Time (s) ...... 1.004
Right Ascension ... 3.5073E+02 Internal time sys.. Converted to TJD
Declination ....... 5.8782E+01 Experiment ........ ASCA GIS3
Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
Selected Columns: 1 - Time; 2 - Y-axis; 3 - Y-error;
File contains binned data.
Ser. A filename 2 +options[.rbf]=>
Enter up to 50 input filenames and options for series 2 (or rtn)
Ser. B filename 1 +options[.rbf]=>
Enter up to 50 input filenames and options for series 3 (or rtn)
Ser. C filename 1 +options[.rbf]=>
[3]xronos>
Maximum of 1 Intvs. with 512 Newbins of 15.6863 (s)
Intv 1 Start 9561 1:11: 3
Ser.1 Avg 49.83 Chisq 126.3 Var 3.302 Newbs. 187
Min 42.84 Max 54.30 expVar 4.353 Bins 2758
Results from Statistical Analysis
Newbin Integration Time (s).. 15.686
Interval Duration (s)........ 8015.7
No. of Newbins .............. 187
Average (c/s) ............... 49.834 +/- 0.15
Standard Deviation (c/s)..... 1.8170
Minimum (c/s)................ 42.842
Maximum (c/s)................ 54.300
Variance ((c/s)**2).......... 3.3015 +/- 0.34
Expected Variance ((c/s)**2). 4.3527 +/- 0.45
Third Moment ((c/s)**3)...... -2.5403
Average Deviation (c/s)...... 1.4439
Skewness.....................-0.42346 +/- 0.18
Kurtosis..................... 0.64491 +/- 0.36
RMS fractional variation....< 0.31923E-01 (3 sigma)
Chi-Square................... 126.34 dof 186
Chi-Square Prob of constancy. 0.99974 (0 means < 1.e-38)
Kolm.-Smir. Prob of constancy 0.15306 (0 means < 1.e-38)
[4]xronos> [5]xronos>
Maximum of 1 Intvs. with 512 Newbins of 15.6863 (s)
Intv 1 Start 9561 1:11: 3
Ser.1 Avg 49.83 Chisq 126.3 Var 3.302 Newbs. 187
Min 42.84 Max 54.30 expVar 4.353 Bins 2758
Light curve ready !
Frme 1 Written to output file : xronos.qlc1
PLT> PLT> PLT> [6]xronos>
-> Merging GTIs from the following files:ad12002100g200170h.evt[2]-> Making L1 light curve of ft940728_0101_0335G2HK.fits with irate=HIGH
ghkcurve: ALLGTI found in input HK file, will be applied to data. ghkcurve: 22098 output records from 22109 good input G2_L1 records.-> Making L1 light curve of ft940728_0101_0335G2HK.fits with irate=HI+MED
ghkcurve: ALLGTI found in input HK file, will be applied to data. ghkcurve: 2756 output records from 22109 good input G2_L1 records.-> Merging GTIs from the following files:
ad12002100g300170h.evt[2]-> Making L1 light curve of ft940728_0101_0335G3HK.fits with irate=HIGH
ghkcurve: ALLGTI found in input HK file, will be applied to data. ghkcurve: 22121 output records from 22132 good input G3_L1 records.-> Making L1 light curve of ft940728_0101_0335G3HK.fits with irate=HI+MED
ghkcurve: ALLGTI found in input HK file, will be applied to data. ghkcurve: 2757 output records from 22132 good input G3_L1 records.
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C0 PH HIGH 28/07/94 01:10:55 0.28E+04 138938 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data24/seq_proc/12002100.004/ad12002100g200170h.evt
Total Good Bad: Region Time Phase Cut
138938 117120 21818 0 0 0
Writing events file
117120 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
138938 117120 21818 0 0 0
in 2765.97 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!xsel:ASCA > read events ad12002100g200170h.evt
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!xsel:ASCA-GIS2-PH > filter region ad12002100g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad12002100g200170h_1.ulc use_events=yes
Wrote events list to file ad12002100g200170h_1.ulc
Changing Data directory from:
/data/data24/seq_proc/12002100.004/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no
-> Extracting unbinned light curve ad12002100g300170h_1.ulc
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C0 PH HIGH 28/07/94 01:10:55 0.28E+04 158128 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data24/seq_proc/12002100.004/ad12002100g300170h.evt
Total Good Bad: Region Time Phase Cut
158128 137891 20237 0 0 0
Writing events file
137891 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
158128 137891 20237 0 0 0
in 2767.97 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!xsel:ASCA > read events ad12002100g300170h.evt
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!xsel:ASCA-GIS3-PH > filter region ad12002100g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad12002100g300170h_1.ulc use_events=yes
Wrote events list to file ad12002100g300170h_1.ulc
Changing Data directory from:
/data/data24/seq_proc/12002100.004/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no
-> Extracting unbinned light curve ad12002100s000102h_1.ulc
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C0 BRIGHT HIGH 28/07/94 01:10:43 0.21E+04 112850 1000
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data24/seq_proc/12002100.004/ad12002100s000102h.evt
Total Good Bad: Region Time Phase Cut
112850 101647 11203 0 0 0
Writing events file
101647 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
112850 101647 11203 0 0 0
in 2057.76 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!xsel:ASCA > read events ad12002100s000102h.evt
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!xsel:ASCA-SIS0-BRIGHT > filter region ad12002100s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=ad12002100s000102h_1.ulc use_events=yes
Wrote events list to file ad12002100s000102h_1.ulc
Changing Data directory from:
/data/data24/seq_proc/12002100.004/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no
-> Extracting unbinned light curve ad12002100s000112h_1.ulc
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C0 BRIGHT2 HIGH 28/07/94 01:10:43 0.21E+04 113097 1000
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data24/seq_proc/12002100.004/ad12002100s000112h.evt
Total Good Bad: Region Time Phase Cut
113097 101871 11226 0 0 0
Writing events file
101871 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
113097 101871 11226 0 0 0
in 2057.76 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!xsel:ASCA > read events ad12002100s000112h.evt
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 4095
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad12002100s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT2 > extract events
!xsel:ASCA-SIS0-BRIGHT2 > save events outfile=ad12002100s000112h_1.ulc use_events=yes
Wrote events list to file ad12002100s000112h_1.ulc
Changing Data directory from:
/data/data24/seq_proc/12002100.004/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Extracting unbinned light curve ad12002100s100102h_1.ulc
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C0 BRIGHT HIGH 28/07/94 01:10:43 0.88E+03 53101 0010
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data24/seq_proc/12002100.004/ad12002100s100102h.evt
Total Good Bad: Region Time Phase Cut
53101 49543 3558 0 0 0
Writing events file
49543 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
53101 49543 3558 0 0 0
in 883.95 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!xsel:ASCA > read events ad12002100s100102h.evt
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!xsel:ASCA-SIS1-BRIGHT > filter region ad12002100s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=ad12002100s100102h_1.ulc use_events=yes
Wrote events list to file ad12002100s100102h_1.ulc
Changing Data directory from:
/data/data24/seq_proc/12002100.004/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no
-> Extracting unbinned light curve ad12002100s100112h_1.ulc
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C0 BRIGHT2 HIGH 28/07/94 01:10:43 0.88E+03 53134 0010
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data24/seq_proc/12002100.004/ad12002100s100112h.evt
Total Good Bad: Region Time Phase Cut
53134 49592 3542 0 0 0
Writing events file
49592 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
53134 49592 3542 0 0 0
in 883.95 seconds
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!xsel:ASCA > read events ad12002100s100112h.evt
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 4095
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad12002100s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > extract events
!xsel:ASCA-SIS1-BRIGHT2 > save events outfile=ad12002100s100112h_1.ulc use_events=yes
Wrote events list to file ad12002100s100112h_1.ulc
Changing Data directory from:
/data/data24/seq_proc/12002100.004/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no
*** tlmFrm Version 1.1 (1997-08-25) *** total number of superframes: 2761 Total of 0 sets of frame data are extracted.
1 ad12002100g200170h.unf 201726 1 ad12002100g200270l.unf 201726-> Fetching GIS2_CALSRC256.2
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C0 PH HIGH 28/07/94 01:10:55 0.44E+04 200001 1024
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C0 PH HIGH 28/07/94 01:10:55 0.44E+04 200001 1024
2 CAS_A_C0 PH LOW 28/07/94 01:02:17 0.14E+04 1725 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data24/seq_proc/12002100.004/ad12002100g200170h.unf
Total Good Bad: Region Time Phase Cut
200001 1304 198697 0 0 0
Doing file: /data/data24/seq_proc/12002100.004/ad12002100g200270l.unf
Total Good Bad: Region Time Phase Cut
1725 348 1377 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
201726 1652 200074 0 0 0
in 5781.98 seconds
Spectrum has 1652 counts for 0.2857 counts/sec
-------------------------
MANDATORY KEYWORDS/VALUES
-------------------------
--------------------------------------------------------------------
--------------------------------------------------------------------
EXTNAME - SPECTRUM Name of this BINTABLE
TELESCOP - ASCA Mission/Satellite name
INSTRUME - GIS2 Instrument/Detector
FILTER - Instrument filter in use
EXPOSURE - 5782.0 Integration time (in secs) of PHA data
AREASCAL - 1.0000 Area scaling factor
BACKSCAL - 3.57971E-02 Background scaling factor
BACKFILE - NONE Associated background file
CORRSCAL - 1.0000 Correlation scaling factor
CORRFILE - none Associated correlation file
RESPFILE - NONE Associated redistribution matrix file
ANCRFILE - none Associated ancillary response file
XFLT0001 - none XSPEC selection filter
POISSERR - TRUE Whether Poissonian errors apply
CHANTYPE - PI Whether channels have been corrected
TLMIN1 - 0 First legal Detector channel
DETCHANS - 1024 No. of legal detector channels
NCHAN - 1024 No. of detector channels in dataset
PHAVERSN - 1992a OGIP FITS version number
STAT_ERR - FALSE Statistical Error
SYS_ERR - TRUE Fractional Systematic Error
QUALITY - TRUE Quality Flag
GROUPING - FALSE Grouping Flag
--------------------------------------------------------------------
--------------------------------------------------------------------
...
... --------
... GROUPING
... --------
... ---------------------------------------------
... Channel Grouping (Channel-Channel) :
... ---------------------------------------------
...
...... exiting, changes written to file : ad12002100g220170.cal
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!xsel:ASCA > read events ad12002100g200170h.unf
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!xsel:ASCA-GIS2-PH > read events ad12002100g200270l.unf
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 2.0000
Number of files read in: 2
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!xsel:ASCA-GIS2-PH > filter region GIS2_CALSRC256.2
!xsel:ASCA-GIS2-PH > extract spectrum
!xsel:ASCA-GIS2-PH > save spectrum ad12002100g220170.cal group=yes
Wrote spectrum to ad12002100g220170.cal
!xsel:ASCA-GIS2-PH > exit save_session=no
-> gis2v4_0.rmf already present in current directory
XSPEC 9.01 04:02:55 23-Mar-98
Plot device not set, use "cpd" to set it
Type "help" or "?" for further information
!XSPEC> query yes
Querying disabled - assuming answer is yes
!XSPEC> data ad12002100g220170.cal
Net count rate (cts/s) for file 1 0.2857 +/- 7.1769E-03
1 data set is in use
!XSPEC> ignore bad
!XSPEC> ignore **-4.0
!XSPEC> ignore 8.0-**
!XSPEC> model const/b + gauss/b + gauss/b
Background components must be from the additive model list
mo = constant[1] ) + gaussian/b[2] + gaussian/b[3]
Input parameter value, delta, min, bot, top, and max values for ...
Mod parameter 1 of component 1 constant factor
1.000 1.0000E-02 0. 0. 1.0000E+10 1.0000E+10
!
Mod parameter 2 of component 2 gaussian LineE
6.500 5.0000E-02 0. 0. 1.0000E+06 1.0000E+06
! 5.9
Mod parameter 3 of component 2 gaussian Sigma
0.1000 5.0000E-02 0. 0. 10.00 20.00
! 0.0
Mod parameter 4 of component 2 gaussian norm
1.000 1.0000E-02 0. 0. 1.0000E+24 1.0000E+24
!
Mod parameter 5 of component 3 gaussian LineE
6.500 5.0000E-02 0. 0. 1.0000E+06 1.0000E+06
! 6.5
Mod parameter 6 of component 3 gaussian Sigma
0.1000 5.0000E-02 0. 0. 10.00 20.00
! 0.0
Mod parameter 7 of component 3 gaussian norm
1.000 1.0000E-02 0. 0. 1.0000E+24 1.0000E+24
!
---------------------------------------------------------------------------
---------------------------------------------------------------------------
mo = constant[1] ) + gaussian/b[2] + gaussian/b[3]
Model Fit Model Component Parameter Value
par par comp
1 1 1 constant factor 1.00000 +/- 0.
2 2 2 gaussian/b LineE 5.90000 +/- 0.
3 3 2 gaussian/b Sigma 0. +/- 0.
4 4 2 gaussian/b norm 1.00000 +/- 0.
5 5 3 gaussian/b LineE 6.50000 +/- 0.
6 6 3 gaussian/b Sigma 0. +/- 0.
7 7 3 gaussian/b norm 1.00000 +/- 0.
---------------------------------------------------------------------------
---------------------------------------------------------------------------
7 variable fit parameters
Chi-Squared = 1.4629E+05 using 84 PHA bins.
Reduced chi-squared = 1900.
!XSPEC> newpar 5 = 2 1.101005
6 variable fit parameters
Chi-Squared = 1.4448E+05 using 84 PHA bins.
Reduced chi-squared = 1852.
!XSPEC> newpar 6 = 3 1.049288
5 variable fit parameters
Chi-Squared = 1.4448E+05 using 84 PHA bins.
Reduced chi-squared = 1829.
!XSPEC> renorm
Chi-Squared = 527.1 using 84 PHA bins.
Reduced chi-squared = 6.672
!XSPEC> fit
Chi-Squared Lvl Fit param # 1 2 3 4
5
Due to zero model norms
fit parameter 1 is temporarily frozen
439.95 0 1.000 5.891 7.0493E-02 7.5830E-02
6.5677E-02
Due to zero model norms
fit parameter 1 is temporarily frozen
191.70 0 1.000 5.853 0.1244 0.1166
5.7922E-02
Due to zero model norms
fit parameter 1 is temporarily frozen
119.59 -1 1.000 5.871 0.1501 0.1587
4.5689E-02
Due to zero model norms
fit parameter 1 is temporarily frozen
89.068 -2 1.000 5.929 0.1864 0.1836
2.8580E-02
Due to zero model norms
fit parameter 1 is temporarily frozen
84.190 -3 1.000 5.957 0.2051 0.1950
1.9996E-02
Due to zero model norms
fit parameter 1 is temporarily frozen
84.177 -4 1.000 5.959 0.2066 0.1956
1.9455E-02
Due to zero model norms
fit parameter 1 is temporarily frozen
84.177 3 1.000 5.959 0.2066 0.1956
1.9455E-02
---------------------------------------------------------------------------
---------------------------------------------------------------------------
mo = constant[1] ) + gaussian/b[2] + gaussian/b[3]
Model Fit Model Component Parameter Value
par par comp
1 1 1 constant factor 1.00000 +/- -1.0000
2 2 2 gaussian/b LineE 5.95852 +/- 0.13973E-01
3 3 2 gaussian/b Sigma 0.206619 +/- 0.14797E-01
4 4 2 gaussian/b norm 0.195610 +/- 0.71631E-02
5 2 3 gaussian/b LineE 6.56036 = par 2 * 1.1010
6 3 3 gaussian/b Sigma 0.216803 = par 3 * 1.0493
7 5 3 gaussian/b norm 1.945501E-02 +/- 0.44454E-02
---------------------------------------------------------------------------
---------------------------------------------------------------------------
Chi-Squared = 84.18 using 84 PHA bins.
Reduced chi-squared = 1.066
!XSPEC> setplot energy
!XSPEC> iplot data
!PLT> label top GIS2 Calibration Source, should peak near 5.9 keV
!PLT> log x off
!PLT> rescale x 4 8
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
XSPEC: quit
-> Calibration source ad12002100g220170.cal peaks at 5.95852 +/- 0.013973 keV1 ad12002100g300170h.unf 228182 1 ad12002100g300270l.unf 228182-> Fetching GIS3_CALSRC256.2
** XSELECT V1.3 **
!> Enter session name >[xsel] xsel
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C0 PH HIGH 28/07/94 01:10:55 0.44E+04 226484 1024
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C0 PH HIGH 28/07/94 01:10:55 0.44E+04 226484 1024
2 CAS_A_C0 PH LOW 28/07/94 01:02:17 0.14E+04 1698 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Getting FITS WCS Keywords
Doing file: /data/data24/seq_proc/12002100.004/ad12002100g300170h.unf
Total Good Bad: Region Time Phase Cut
226484 1089 225395 0 0 0
Doing file: /data/data24/seq_proc/12002100.004/ad12002100g300270l.unf
Total Good Bad: Region Time Phase Cut
1698 367 1331 0 0 0
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
228182 1456 226726 0 0 0
in 5781.98 seconds
Spectrum has 1456 counts for 0.2518 counts/sec
-------------------------
MANDATORY KEYWORDS/VALUES
-------------------------
--------------------------------------------------------------------
--------------------------------------------------------------------
EXTNAME - SPECTRUM Name of this BINTABLE
TELESCOP - ASCA Mission/Satellite name
INSTRUME - GIS3 Instrument/Detector
FILTER - Instrument filter in use
EXPOSURE - 5782.0 Integration time (in secs) of PHA data
AREASCAL - 1.0000 Area scaling factor
BACKSCAL - 2.83356E-02 Background scaling factor
BACKFILE - NONE Associated background file
CORRSCAL - 1.0000 Correlation scaling factor
CORRFILE - none Associated correlation file
RESPFILE - NONE Associated redistribution matrix file
ANCRFILE - none Associated ancillary response file
XFLT0001 - none XSPEC selection filter
POISSERR - TRUE Whether Poissonian errors apply
CHANTYPE - PI Whether channels have been corrected
TLMIN1 - 0 First legal Detector channel
DETCHANS - 1024 No. of legal detector channels
NCHAN - 1024 No. of detector channels in dataset
PHAVERSN - 1992a OGIP FITS version number
STAT_ERR - FALSE Statistical Error
SYS_ERR - TRUE Fractional Systematic Error
QUALITY - TRUE Quality Flag
GROUPING - FALSE Grouping Flag
--------------------------------------------------------------------
--------------------------------------------------------------------
...
... --------
... GROUPING
... --------
... ---------------------------------------------
... Channel Grouping (Channel-Channel) :
... ---------------------------------------------
...
...... exiting, changes written to file : ad12002100g320170.cal
Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!xsel:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!xsel:ASCA > read events ad12002100g300170h.unf
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!xsel:ASCA-GIS3-PH > read events ad12002100g300270l.unf
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 2.0000
Number of files read in: 2
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!xsel:ASCA-GIS3-PH > filter region GIS3_CALSRC256.2
!xsel:ASCA-GIS3-PH > extract spectrum
!xsel:ASCA-GIS3-PH > save spectrum ad12002100g320170.cal group=yes
Wrote spectrum to ad12002100g320170.cal
!xsel:ASCA-GIS3-PH > exit save_session=no
-> gis3v4_0.rmf already present in current directory
XSPEC 9.01 04:03:53 23-Mar-98
Plot device not set, use "cpd" to set it
Type "help" or "?" for further information
!XSPEC> query yes
Querying disabled - assuming answer is yes
!XSPEC> data ad12002100g320170.cal
Net count rate (cts/s) for file 1 0.2518 +/- 6.8201E-03
1 data set is in use
!XSPEC> ignore bad
!XSPEC> ignore **-4.0
!XSPEC> ignore 8.0-**
!XSPEC> model const/b + gauss/b + gauss/b
Background components must be from the additive model list
mo = constant[1] ) + gaussian/b[2] + gaussian/b[3]
Input parameter value, delta, min, bot, top, and max values for ...
Mod parameter 1 of component 1 constant factor
1.000 1.0000E-02 0. 0. 1.0000E+10 1.0000E+10
!
Mod parameter 2 of component 2 gaussian LineE
6.500 5.0000E-02 0. 0. 1.0000E+06 1.0000E+06
! 5.9
Mod parameter 3 of component 2 gaussian Sigma
0.1000 5.0000E-02 0. 0. 10.00 20.00
! 0.0
Mod parameter 4 of component 2 gaussian norm
1.000 1.0000E-02 0. 0. 1.0000E+24 1.0000E+24
!
Mod parameter 5 of component 3 gaussian LineE
6.500 5.0000E-02 0. 0. 1.0000E+06 1.0000E+06
! 6.5
Mod parameter 6 of component 3 gaussian Sigma
0.1000 5.0000E-02 0. 0. 10.00 20.00
! 0.0
Mod parameter 7 of component 3 gaussian norm
1.000 1.0000E-02 0. 0. 1.0000E+24 1.0000E+24
!
---------------------------------------------------------------------------
---------------------------------------------------------------------------
mo = constant[1] ) + gaussian/b[2] + gaussian/b[3]
Model Fit Model Component Parameter Value
par par comp
1 1 1 constant factor 1.00000 +/- 0.
2 2 2 gaussian/b LineE 5.90000 +/- 0.
3 3 2 gaussian/b Sigma 0. +/- 0.
4 4 2 gaussian/b norm 1.00000 +/- 0.
5 5 3 gaussian/b LineE 6.50000 +/- 0.
6 6 3 gaussian/b Sigma 0. +/- 0.
7 7 3 gaussian/b norm 1.00000 +/- 0.
---------------------------------------------------------------------------
---------------------------------------------------------------------------
7 variable fit parameters
Chi-Squared = 1.5264E+05 using 84 PHA bins.
Reduced chi-squared = 1982.
!XSPEC> newpar 5 = 2 1.101005
6 variable fit parameters
Chi-Squared = 1.5190E+05 using 84 PHA bins.
Reduced chi-squared = 1947.
!XSPEC> newpar 6 = 3 1.049288
5 variable fit parameters
Chi-Squared = 1.5190E+05 using 84 PHA bins.
Reduced chi-squared = 1923.
!XSPEC> renorm
Chi-Squared = 486.3 using 84 PHA bins.
Reduced chi-squared = 6.155
!XSPEC> fit
Chi-Squared Lvl Fit param # 1 2 3 4
5
Due to zero model norms
fit parameter 1 is temporarily frozen
393.00 0 1.000 5.895 0.1023 7.2929E-02
6.2689E-02
Due to zero model norms
fit parameter 1 is temporarily frozen
189.82 0 1.000 5.881 0.1377 0.1140
5.3000E-02
Due to zero model norms
fit parameter 1 is temporarily frozen
83.676 -1 1.000 5.950 0.1405 0.1668
3.0202E-02
Due to zero model norms
fit parameter 1 is temporarily frozen
78.549 -2 1.000 5.940 0.1183 0.1723
3.0265E-02
Due to zero model norms
fit parameter 1 is temporarily frozen
78.387 -3 1.000 5.944 0.1193 0.1737
2.9090E-02
Due to zero model norms
fit parameter 1 is temporarily frozen
78.359 -4 1.000 5.943 0.1175 0.1733
2.9470E-02
Due to zero model norms
fit parameter 1 is temporarily frozen
78.359 -3 1.000 5.943 0.1179 0.1734
2.9332E-02
---------------------------------------------------------------------------
---------------------------------------------------------------------------
mo = constant[1] ) + gaussian/b[2] + gaussian/b[3]
Model Fit Model Component Parameter Value
par par comp
1 1 1 constant factor 1.00000 +/- -1.0000
2 2 2 gaussian/b LineE 5.94343 +/- 0.10447E-01
3 3 2 gaussian/b Sigma 0.117862 +/- 0.15762E-01
4 4 2 gaussian/b norm 0.173435 +/- 0.62391E-02
5 2 3 gaussian/b LineE 6.54375 = par 2 * 1.1010
6 3 3 gaussian/b Sigma 0.123672 = par 3 * 1.0493
7 5 3 gaussian/b norm 2.933245E-02 +/- 0.36115E-02
---------------------------------------------------------------------------
---------------------------------------------------------------------------
Chi-Squared = 78.36 using 84 PHA bins.
Reduced chi-squared = 0.9919
!XSPEC> setplot energy
!XSPEC> iplot data
!PLT> label top GIS3 Calibration Source, should peak near 5.9 keV
!PLT> log x off
!PLT> rescale x 4 8
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
XSPEC: quit
-> Calibration source ad12002100g320170.cal peaks at 5.94343 +/- 0.010447 keV
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C0 BRIGHT HIGH 28/07/94 01:10:43 0.53E+04 300850 1000
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!earthevents:ASCA > read events ad12002100s000102h.unf
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
The selection criteria produced no GTI's
Failed to get mkf_exp
XSL_SELECT: Status = -10
earthevents:ASCA-SIS0-BRIGHT > Session saved, goodbye
-> ad12002100s000102h.drk not created
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C0 BRIGHT2 HIGH 28/07/94 01:10:43 0.53E+04 301098 1000
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!earthevents:ASCA > read events ad12002100s000112h.unf
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 4095
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!earthevents:ASCA-SIS0-BRIGHT2 > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
The selection criteria produced no GTI's
Failed to get mkf_exp
XSL_SELECT: Status = -10
earthevents:ASCA-SIS0-BRIGHT2 > Session saved, goodbye
-> ad12002100s000112h.drk not created
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C0 BRIGHT LOW 28/07/94 01:02:11 0.22E+04 1245 1000
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!earthevents:ASCA > read events ad12002100s000202l.unf
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
The selection criteria produced no GTI's
Failed to get mkf_exp
XSL_SELECT: Status = -10
earthevents:ASCA-SIS0-BRIGHT > Session saved, goodbye
-> ad12002100s000202l.drk not created
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW
1 CAS_A_C0 BRIGHT2 LOW 28/07/94 01:02:11 0.22E+04 1251 1000
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!earthevents:ASCA > read events ad12002100s000212l.unf
Got new instrument: SIS0
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 4095
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!earthevents:ASCA-SIS0-BRIGHT2 > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
The selection criteria produced no GTI's
Failed to get mkf_exp
XSL_SELECT: Status = -10
earthevents:ASCA-SIS0-BRIGHT2 > Session saved, goodbye
-> ad12002100s000212l.drk not created
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C0 BRIGHT HIGH 28/07/94 01:10:43 0.53E+04 309430 0010
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!earthevents:ASCA > read events ad12002100s100102h.unf
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
The selection criteria produced no GTI's
Failed to get mkf_exp
XSL_SELECT: Status = -10
earthevents:ASCA-SIS1-BRIGHT > Session saved, goodbye
-> ad12002100s100102h.drk not created
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C0 BRIGHT2 HIGH 28/07/94 01:10:43 0.53E+04 309515 0010
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!earthevents:ASCA > read events ad12002100s100112h.unf
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 4095
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
The selection criteria produced no GTI's
Failed to get mkf_exp
XSL_SELECT: Status = -10
earthevents:ASCA-SIS1-BRIGHT2 > Session saved, goodbye
-> ad12002100s100112h.drk not created
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C0 BRIGHT LOW 28/07/94 01:02:11 0.22E+04 1462 0010
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!earthevents:ASCA > read events ad12002100s100202l.unf
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 2047
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
The selection criteria produced no GTI's
Failed to get mkf_exp
XSL_SELECT: Status = -10
earthevents:ASCA-SIS1-BRIGHT > Session saved, goodbye
-> ad12002100s100202l.drk not created
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW
1 CAS_A_C0 BRIGHT2 LOW 28/07/94 01:02:11 0.22E+04 1462 0010
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!earthevents:ASCA > read events ad12002100s100212l.unf
Got new instrument: SIS1
Setting: IMAGE binning = 4
WMAP binning = 8
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 4095
Got the minimum time resolution of the read data: 4.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
The selection criteria produced no GTI's
Failed to get mkf_exp
XSL_SELECT: Status = -10
earthevents:ASCA-SIS1-BRIGHT2 > Session saved, goodbye
-> ad12002100s100212l.drk not created
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C0 PH HIGH 28/07/94 01:10:55 0.44E+04 200001 1024
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!earthevents:ASCA > read events ad12002100g200170h.unf
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
The selection criteria produced no GTI's
Failed to get mkf_exp
XSL_SELECT: Status = -10
earthevents:ASCA-GIS2-PH > Session saved, goodbye
-> ad12002100g200170h.drk not created
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C0 PH HIGH 28/07/94 01:10:55 0.44E+04 200001 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data24/seq_proc/12002100.004/ad12002100g200170h.unf
Total Good Bad: Region Time Phase Cut
200001 105 0 199896 0 0
Writing events file
105 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
200001 105 0 199896 0 0
in 122.02 seconds
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!earthevents:ASCA > read events ad12002100g200170h.unf
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no
-> Extracting bright and dark Earth events from ad12002100g200270l.unf
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C0 PH LOW 28/07/94 01:02:17 0.14E+04 1725 1024
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!earthevents:ASCA > read events ad12002100g200270l.unf
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 2.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
The selection criteria produced no GTI's
Failed to get mkf_exp
XSL_SELECT: Status = -10
earthevents:ASCA-GIS2-PH > Session saved, goodbye
-> ad12002100g200270l.drk not created
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C0 PH LOW 28/07/94 01:02:17 0.14E+04 1725 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data24/seq_proc/12002100.004/ad12002100g200270l.unf
Total Good Bad: Region Time Phase Cut
1725 1049 0 676 0 0
Writing events file
1049 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1725 1049 0 676 0 0
in 1184.00 seconds
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!earthevents:ASCA > read events ad12002100g200270l.unf
Got new instrument: GIS2
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 2.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no
-> Extracting bright and dark Earth events from ad12002100g300170h.unf
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C0 PH HIGH 28/07/94 01:10:55 0.44E+04 226484 1024
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!earthevents:ASCA > read events ad12002100g300170h.unf
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
The selection criteria produced no GTI's
Failed to get mkf_exp
XSL_SELECT: Status = -10
earthevents:ASCA-GIS3-PH > Session saved, goodbye
-> ad12002100g300170h.drk not created
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C0 PH HIGH 28/07/94 01:10:55 0.44E+04 226484 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data24/seq_proc/12002100.004/ad12002100g300170h.unf
Total Good Bad: Region Time Phase Cut
226484 103 0 226381 0 0
Writing events file
103 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
226484 103 0 226381 0 0
in 122.02 seconds
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!earthevents:ASCA > read events ad12002100g300170h.unf
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 0.62500E-01
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no
-> Extracting bright and dark Earth events from ad12002100g300270l.unf
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C0 PH LOW 28/07/94 01:02:17 0.14E+04 1698 1024
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!earthevents:ASCA > read events ad12002100g300270l.unf
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 2.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf
The selection criteria produced no GTI's
Failed to get mkf_exp
XSL_SELECT: Status = -10
earthevents:ASCA-GIS3-PH > Session saved, goodbye
-> ad12002100g300270l.drk not created
** XSELECT V1.3 **
!> Enter session name >[xsel] earthevents
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS
1 CAS_A_C0 PH LOW 28/07/94 01:02:17 0.14E+04 1698 1024
EXTRACTOR vers 2.0 11 Apr 1997.
Doing file: /data/data24/seq_proc/12002100.004/ad12002100g300270l.unf
Total Good Bad: Region Time Phase Cut
1698 1049 0 649 0 0
Writing events file
1049 events written to the output file
===============================================================================
Grand Total Good Bad: Region Time Phase Cut
1698 1049 0 649 0 0
in 1184.00 seconds
Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
Notes: XSELECT set up for ASCA
Keywords for time and pha are TIME PI
Units of time are s
Default timing binsize = 16.00
Keywords for images are DETX DETY
Keywords for the WMAP are DETX DETY
!earthevents:ASCA > set datadir .
Setting data directory to /data/data24/seq_proc/12002100.004/
Setting mkf directory to /data/data24/seq_proc/12002100.004/
!earthevents:ASCA > read events ad12002100g300270l.unf
Got new instrument: GIS3
Setting: IMAGE binning = 1
WMAP binning = 1
Energy Column = PI
Energy rebinning = 1
Getting Min and Max for Energy Column...
Got min and max for PI: 0 1023
Got the minimum time resolution of the read data: 2.0000
Number of files read in: 1
******************** Observation Catalogue ********************
Data Directory is: /data/data24/seq_proc/12002100.004/
HK Directory is: /data/data24/seq_proc/12002100.004/
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no
Offset of 1.500000000000000E+08 from 1/1/93 0:0:0 is date and time (including leapseconds) = 3/10/97 2:39:56.000000 Modified Julian Day = 50724.111064814816928
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Doing inventory of all files