Fracture Analog Project Data Holdings
Data were collected at locations both on the surface of the
pond and within six of the wells (E-1, E-2, E-3, E-4, I-3, and II-7).
The locations within the wells vary from a depth of 0.3 m (1.0 ft) to
13.5 m (44.3 ft) and are all located under the infiltration pond.
The data are contained within a single Excel file that gives resistance
vs. time. The probe locations are given in a separate file,
therm_locs.xls, described below.
File name
Therm96.xls
File type/format
Excel file
Quantity measured (units)
resistance (ohm)
Number of probes
38
Period of data collection
8/20/95 to 9/28/96 (not continuous)
Frequency of data collection
one- to ten-minute intervals
File name
therm_locs.xls
File type/format
Excel file
Description
Rows 9 and 10 contain location information for the thermistors. Row 9
gives the well id, and row 10 gives the distance down the borehole (ft).
Coordinates of each well are given in the file well_coords.xls.
(See the page on Site Characterization Data.)