Here are the messages between 20080901 and 20080930. 1. PLOAD Problem 2. Re: PLOAD Problem 3. RE: BASINS 4.0 experience 4. FTableError 5. Re: FTableError 6. Re: PLOAD Problem 7. GIS Layer index error 8. RE: GIS Layer index error 9. Watershed Delineation 10. Problems with BASINS Update 11. Re: Problems with BASINS Update 12. Re: Problems with BASINS Update 13. RE: Problems with BASINS Update 14. Basins to HSPF error 15. RE: Problems with BASINS Update 16. RE: Basins to HSPF error 17. RE: Basins to HSPF error 18. RE: Problems with BASINS Update 19. RE: Problems with BASINS Update 20. RE: Problems with BASINS Update 21. Re: Basins to HSPF error 22. RE: Basins to HSPF error 23. BASINS 4.0 error message 24. HSPF performance in Arctic climate 25. Re: HSPF performance in Arctic climate 26. RE: BASINS 4.0 error message 27. WinHSPF error 341 28. Re: WinHSPF error 341 29. Re: WinHSPF error 341 30. RE: BASINS 4.0 error message 31. BASINS 4.0 Update 8/8/08 available 32. questions about WinHSPF within BASINS 33. Re: WinHSPF error 341 34. Re: ERROR/WARNING ID: 345 1 35. HSPF Limitations ----------------------------------------------------------- X-Message-Number: 1 X-lyris-Id: 173395 Date: Mon, 01 Sep 2008 15:37:05 +0200 From: "Bruce Eady" <205512889@ukzn.ac.za> Subject: PLOAD Problem This is a MIME message. If you are reading this text, you may want to consider changing to a mail reader or gateway that understands how to properly handle MIME multipart messages. --=__Part7A538411.1__= Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: quoted-printable Hello to the BASINS team. =20 My name is Bruce Eady. I'm currently doing my honours year at the = University of KwaZulu-Natal, South Africa. I am currently dealing with = BASINS 4.0 and am incorporating it into my research project, where the = PLOAD model is my focal point. I am using the PLOAD model for the = Hartbeespoort Dam, situated in the North West province of South Africa, = which is a very problematic reservoir with extensive eutrophication taking = place. I think BASINS 4.0 is a really great program and can be used = extensively in the future. =20 But, I seem to have a problem using the simple (EMC) method in PLOAD. I am = modeling PO4 and total nitrogen (TN). The problem is the output, where the = Load and load per acre output shapefiles (lbs) seem to be extremely low = (in between 5 x 10-7 and 2.7 x 10-5 lbs). I'm thinking the calculations = involved are not multiplying the area of the quaternary catchments (which = are in square meters) for the output. Below is what I have been inserting = for the input. =20 General tab: I am using the quaternary cathment layer for the Subbasins = layer. Land Use Type is 'Other Shapefile', as the USGS GIRAS shapefile = does not work in South Africa. =20 Precipitation: Have specified precipitation for each Subbasin (in inches), = with the subbasin ID field set to AREA. =20 Land Use: Have selected the land use layer (namely Transformed Rangelands) = and the Land Use ID Field to SYMBOL_COL (which is the field in the = attribute table containing values corresponding to those in the EMC table) =20 Event Mean Concentration: I have altered a few values here, but I don't = think this will make a difference to the output I am having problems with. = =20 =20 I am not dealing with the remaining tabs (Point Sources, BMPs and Bank = Erosion) for my project. =20 Please could you help me. If there is and additional information regarding = my procedures, please don't hesitate to ask. =20 Thank you. =20 Regards, =20 B.R.Eady =20 UKZN Honours Student=20 (Applied Environmental Science) Please find our Email Disclaimer here: http://www.ukzn.ac.za/disclaimer/ --=__Part7A538411.1__= Content-Type: text/html; charset=US-ASCII Content-Transfer-Encoding: quoted-printable Content-Description: HTML
Hello to the BASINS team.
 
My name is Bruce Eady. I'm currently doing my honours year at the = University of KwaZulu-Natal, South Africa. I am currently dealing with = BASINS 4.0 and am incorporating it into my research project, where the = PLOAD model is my focal point. I am using the PLOAD model for the = Hartbeespoort Dam, situated in the North West province of South Africa, = which is a very problematic reservoir with extensive eutrophication = taking place. I think BASINS 4.0 is a really great program and can be = used extensively in the future.
 
But, I seem to have a problem using the simple (EMC) method in PLOAD. = I am modeling PO4 and total nitrogen (TN). The problem is the output, = where the Load and load per acre output shapefiles (lbs) seem to = be extremely low (in between 5 x 10-7 and 2.7 x 10-5 lbs). I'm = thinking the calculations involved are not multiplying the area of the = quaternary catchments (which are in square meters) for the output. Below = is what I have been inserting for the input.
 
General tab: I am using the quaternary = cathment layer for the Subbasins layer. Land Use Type is 'Other Shapefile',= as the USGS GIRAS shapefile does not work in South Africa.
 
Precipitation: Have specified precipitation = for each Subbasin (in inches), with the subbasin ID field set to AREA.
 
Land Use: Have selected the land use layer = (namely Transformed Rangelands) and the Land Use ID Field to SYMBOL_COL = (which is the field in the attribute table containing values correspon= ding to those in the EMC table)
 
Event Mean Concentration: I have altered a = few values here, but I don't think this will make a difference to the = output I am having problems with.  
 
I am not dealing with the remaining tabs (Point Sources, BMPs and = Bank Erosion) for my project.
 
Please could you help me. If there is and additional information = regarding my procedures, please don't hesitate to ask.
 
Thank you.
 
Regards,
 
B.R.Eady
 
UKZN Honours Student
(Applied Environmental Science)

Please find our Email Disclaimer here-->:= http://www.ukzn.ac.za/disclaimer

--=__Part7A538411.1__=-- ----------------------------------------------------------- X-Message-Number: 2 X-lyris-Id: 173444 Date: Tue, 02 Sep 2008 09:32:22 -1000 (HST) From: Tieshi Huang Subject: Re: PLOAD Problem Hi Bruce, I guess the problem was due to your Precipitation input. In my PLOAD model, there are four subbasins with subbasins 1 to 4. In my Precipitation setup, the Subbasin ID Field is the subbasins 1 to 4. Then PLOAD program will calculate runoff of each subbasin according to its area. Check your subbasin layer through attribute table, your Precipitation Tab - Subbasin ID Field should match the number of your subbasins instead of area, I guess. Tim Bruce Eady wrote: >Hello to the BASINS team. > >My name is Bruce Eady. I'm currently doing my honours year at the University of KwaZulu-Natal, South Africa. I am currently dealing with BASINS 4.0 and am incorporating it into my research project, where the PLOAD model is my focal point. I am using the PLOAD model for the Hartbeespoort Dam, situated in the North West province of South Africa, which is a very problematic reservoir with extensive eutrophication taking place. I think BASINS 4.0 is a really great program and can be used extensively in the future. > >But, I seem to have a problem using the simple (EMC) method in PLOAD. I am modeling PO4 and total nitrogen (TN). The problem is the output, where the Load and load per acre output shapefiles (lbs) seem to be extremely low (in between 5 x 10-7 and 2.7 x 10-5 lbs). I'm thinking the calculations involved are not multiplying the area of the quaternary catchments (which are in square meters) for the output. Below is what I have been inserting for the input. > >General tab: I am using the quaternary cathment layer for the Subbasins layer. Land Use Type is 'Other Shapefile', as the USGS GIRAS shapefile does not work in South Africa. > >Precipitation: Have specified precipitation for each Subbasin (in inches), with the subbasin ID field set to AREA. > >Land Use: Have selected the land use layer (namely Transformed Rangelands) and the Land Use ID Field to SYMBOL_COL (which is the field in the attribute table containing values corresponding to those in the EMC table) > >Event Mean Concentration: I have altered a few values here, but I don't think this will make a difference to the output I am having problems with. > >I am not dealing with the remaining tabs (Point Sources, BMPs and Bank Erosion) for my project. > >Please could you help me. If there is and additional information regarding my procedures, please don't hesitate to ask. > >Thank you. > >Regards, > >B.R.Eady > >UKZN Honours Student >(Applied Environmental Science) > >Please find our Email Disclaimer here: http://www.ukzn.ac.za/disclaimer/ > >------------------------------------------ >You are currently subscribed to the basinsinfo listserver. > >To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov >OR: >Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your >subscription. >OR >Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov >------------------------------------------ ----------------------------------------------------------- X-Message-Number: 3 X-lyris-Id: 173447 Date: Tue, 2 Sep 2008 16:15:04 -0400 From: "Paul Duda" Subject: RE: BASINS 4.0 experience Hi Tim, The BASINS 4.0 PLOAD model has been refined in response to your = feedback. As you note, the pollutant loads calculated using the EMC = method have always been based on weighted flow, and now the output EMCs = are as well. The second item on your list appears to be related to the = method of applying areal BMPs, and that has been refined as well. We've = also added the runoff volumes to the output for the EMC method as you = noted. These changes will be incorporated into the next BASINS 4.0 update, = update 3. We hope this resolves your concerns. =20 Paul Duda AQUA TERRA Consultants -----Original Message----- From: Tieshi Huang [mailto:thuang@hawaii.edu] Sent: Tuesday, August 12, 2008 10:23 PM To: Private list for BASINS users Cc: Private list for BASINS users Subject: Re: [basinsinfo] BASINS 4.0 experience I had problems too with PLOAD model of BASINS 4.0. =20 (1) In BASINS 4.0, it looks like the EMC is calculated based on=20 weighted area instead of weighted flow, but the pollutant load is=20 calculated based on weighted flow. In BASINS 3.0, both the EMC and=20 pollutant are calculated based on weighted flow. (2) With the application of BMP, BASINS 4.0 does not give the results=20 expected to be, but BASINS 3.0 matches my expectation. (3) Basins 3.0 can give storm runoff value, but I don't know how to get=20 it from BASINS 4.0. Tim Huang Lian, Yanqing wrote: > I hope some of you out there could share your experience on BASINS = 4.0. >I have had problems with delineation and some data downloading. The >program became extremely slow after I downloaded DEM and landuse data.=20 > >=20 > >So I stick on BASINS 3.0, which has been pretty smooth.=20 > >=20 > >Thanks > >=20 > >Yanqing Lian > > >------------------------------------------ >You are currently subscribed to the basinsinfo listserver.=20 > >To unsubscribe, send the words unsubscribe basinsinfo to=20 lyris@lists.epa.gov >OR: >Use the listserver's web interface at=20 https://lists.epa.gov/cgi-bin/lyris.pl to manage your=20 >subscription. >OR >Contact the basinsinfo listserver owner at=20 basinsinfo-Owner@lists.epa.gov >------------------------------------------ ------------------------------------------ You are currently subscribed to the basinsinfo listserver.=20 To unsubscribe, send the words unsubscribe basinsinfo to = lyris@lists.epa.gov OR: Use the listserver's web interface at = https://lists.epa.gov/cgi-bin/lyris.pl to manage your=20 subscription. OR Contact the basinsinfo listserver owner at = basinsinfo-Owner@lists.epa.gov ------------------------------------------ -- If this email is spam, report it here: http://www.onlymyemail.com/view/?action=3DreportSpam&Id=3DMTcyMzc6NzE1MzA= 5MDUwOnBiZHVkYUBhcXVhdGVycmEuY29t ----------------------------------------------------------- X-Message-Number: 4 X-lyris-Id: 173458 Date: Wed, 3 Sep 2008 09:08:09 -0400 From: "Parker, Joseph Michael" Subject: FTableError This is a multi-part message in MIME format. ------_=_NextPart_001_01C90DC6.1CF75694 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello all I am getting this error for the reach below which is located in a small = high elevation subwatershed in Western NC. At first I ran with the ftable given from = BASINS manual=20 delineation which gave me a ftable error. Then I tried calculating a new ftable based on the Compute new ftable by selecting the physiographic province but I am still getting an error. = Has anyone ran into this error before. Thank you=20 Joseph Parker University of Tennessee ERROR/WARNING ID: 341 4 = * * = * * DATE/TIME: 1964/11/25 3: 0 = * * = * * RCHRES: 25 = * * = * * The calculation of relative depth in subroutine AUXIL, using = Newton's * * method of successive approximations, did not converge. Probable = reason -- * * unusual or bad entries in RCHTAB. Relevant data are: = * * = * * A B C RDEP1 RDEP2 COUNT = * * 0.0000E+00 1.2197E+04 ********** ********** ********** 101 = * * = * *************************************************************************= *********** ------_=_NextPart_001_01C90DC6.1CF75694 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable FTableError

Hello all

I am getting this error for the reach below which is located in a small = high elevation
subwatershed in Western NC. At first I ran with the ftable given from = BASINS manual
delineation which gave me a ftable error. Then
I tried calculating a new ftable based on the Compute new ftable
by selecting the physiographic province but I am still getting an = error.

Has anyone ran into this error before.

Thank you
Joseph Parker
University of Tennessee



 ERROR/WARNING ID:   341   = 4            =             &= nbsp;           &n= bsp;           &nb= sp;    *
 *           =             &= nbsp;           &n= bsp;           &nb= sp;           &nbs= p;            = ;          *
 *  DATE/TIME: 1964/11/25  3: = 0            =             &= nbsp;           &n= bsp;           &nb= sp;    *
 *           =             &= nbsp;           &n= bsp;           &nb= sp;           &nbs= p;            = ;          *
 *  RCHRES:    = 25            = ;            =             &= nbsp;           &n= bsp;           &nb= sp;      *
 *           =             &= nbsp;           &n= bsp;           &nb= sp;           &nbs= p;            = ;          *
 *  The calculation of relative depth in subroutine AUXIL, = using = Newton's           = *
 *  method of successive approximations, did not = converge.  Probable reason --      *
 *  unusual or bad entries in RCHTAB.  Relevant data = are:           &nb= sp;           &nbs= p;   *
 *           =             &= nbsp;           &n= bsp;           &nb= sp;           &nbs= p;            = ;          *
*           = A          = B          = C      RDEP1      = RDEP2  = COUNT           &n= bsp;       *
 *  0.0000E+00 1.2197E+04 ********** ********** = **********    = 101           &nbs= p;       *
 *           =             &= nbsp;           &n= bsp;           &nb= sp;           &nbs= p;            = ;          *
*************************************************************************= ***********

------_=_NextPart_001_01C90DC6.1CF75694-- ----------------------------------------------------------- X-Message-Number: 5 X-lyris-Id: 173495 Date: Wed, 3 Sep 2008 09:39:11 -0700 From: "Ashley Perkins" Subject: Re: FTableError ------=_Part_21514_22362225.1220459951881 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline Hi Joesph, I am currently working on correcting this error as well, and have followed the same steps as you. With the AUXILFG's turned off I am able to model long term annual flows that differ 1% from measured records. However, I am continuing to work on manually altering the FTables. There is a helpful dialogue about this problem in the Sept 07 listserve archives: http://www.epa.gov/waterscience/basins/blistsrv/sep07.txt Good luck, Ashley Perkins On Wed, Sep 3, 2008 at 6:08 AM, Parker, Joseph Michael wrote: > Hello all > > I am getting this error for the reach below which is located in a small > high elevation > subwatershed in Western NC. At first I ran with the ftable given from > BASINS manual > delineation which gave me a ftable error. Then > I tried calculating a new ftable based on the Compute new ftable > by selecting the physiographic province but I am still getting an error. > > Has anyone ran into this error before. > > Thank you > Joseph Parker > University of Tennessee > > > > ERROR/WARNING ID: 341 > 4 * > * > * > * DATE/TIME: 1964/11/25 3: > 0 * > * > * > * RCHRES: > 25 * > * > * > * The calculation of relative depth in subroutine AUXIL, using > Newton's * > * method of successive approximations, did not converge. Probable reason > -- * > * unusual or bad entries in RCHTAB. Relevant data > are: * > * > * > * A B C RDEP1 RDEP2 > COUNT * > * 0.0000E+00 1.2197E+04 ********** ********** ********** > 101 * > * > * > > ******************************************************************************** **** > > ------------------------------------------ > You are currently subscribed to the basinsinfo listserver. > > To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov > OR: > Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your > subscription. > OR > Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov > ------------------------------------------ > > ------=_Part_21514_22362225.1220459951881 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline
Hi Joesph,
 
I am currently working on correcting this error as well, and have foll= owed the same steps as you.  With the AUXILFG's turned off I am ab= le to model long term annual flows that differ 1% from measured records.&nb= sp; However, I am continuing to work on manually altering the FTables.
 
There is a helpful dialogue about this problem in the Sept 07 listserv= e archives:
 
Good luck,
 
Ashley Perkins

 
On Wed, Sep 3, 2008 at 6:08 AM, Parker, Joseph M= ichael <jparke33@u= tk.edu> wrote:

Hello all

I am getting this error for the reach = below which is located in a small high elevation
subwatershed in Western= NC. At first I ran with the ftable given from BASINS manual
delineation= which gave me a ftable error. Then
I tried calculating a new ftable based on the Compute new ftable
by sele= cting the physiographic province but I am still getting an error.

Ha= s anyone ran into this error before.

Thank you
Joseph Parker
University of Tennessee



 ERROR/WARNING ID:   = 341   4         &nbs= p;            &= nbsp;           &nbs= p;            &= nbsp;     *
 *     &nb= sp;            =             &nb= sp;            =             &nb= sp;            =             &nb= sp; *
 *  DATE/TIME: 1964/11/25  3: 0   &n= bsp;            = ;            &n= bsp;            = ;            *
 *           &n= bsp;            = ;            &n= bsp;            = ;            &n= bsp;            = ;        *
 *  RCHRES: = ;   25          = ;            &n= bsp;            = ;            &n= bsp;            = ;       *
 *    &= nbsp;           &nbs= p;            &= nbsp;           &nbs= p;            &= nbsp;           &nbs= p;            &= nbsp;  *
 *  The calculation of relative depth in subroutine AUXIL, using = Newton's           *<= br> *  method of successive approximations, did not converge.&nbs= p; Probable reason --      *
 *  unus= ual or bad entries in RCHTAB.  Relevant data are:   &nb= sp;            =            *
 *           &n= bsp;            = ;            &n= bsp;            = ;            &n= bsp;            = ;        *
*    &= nbsp;      A      &n= bsp;   B          C&= nbsp;     RDEP1      RDEP2&nbs= p; COUNT           &= nbsp;       *
 *  0.0000E+00 1.2= 197E+04 ********** ********** **********    101  &= nbsp;           &nbs= p;    *
 *           &n= bsp;            = ;            &n= bsp;            = ;            &n= bsp;            = ;        *
**************************= **********************************************************


<= pre>------------------------------------------ You are currently subscribed to the basinsinfo listserver.=20 To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov OR: Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl<= /a> to manage your=20 subscription. OR Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov ------------------------------------------
------=_Part_21514_22362225.1220459951881-- ----------------------------------------------------------- X-Message-Number: 6 X-lyris-Id: 173508 Date: Thu, 04 Sep 2008 13:11:50 +0200 From: "Bruce Eady" <205512889@ukzn.ac.za> Subject: Re: PLOAD Problem Hi Tim, Thanks so much for getting back to me with regards to my PLOAD problem. I have tried your solution, and I'm sorry to say it still does not work = (still get really small values for load in lbs). I'm not sure if you'll = know, but do the columns in the attribute table have to be in a certain = order for the model to 'read' from it? I appreciate your time Tim, thank you! Regards, B.R.Eady =20 UKZN Honours Student=20 (Applied Environmental Science) >>> Tieshi Huang 2008/09/02 09:32 PM >>> Hi Bruce, I guess the problem was due to your Precipitation input. In my PLOAD=20 model, there are four subbasins with subbasins 1 to 4. In my=20 Precipitation setup, the Subbasin ID Field is the subbasins 1 to 4. =20 Then PLOAD program will calculate runoff of each subbasin according to=20 its area. Check your subbasin layer through attribute table, your Precipitation=20 Tab - Subbasin ID Field should match the number of your subbasins=20 instead of area, I guess. Tim Bruce Eady wrote: >Hello to the BASINS team. >=20 >My name is Bruce Eady. I'm currently doing my honours year at the=20 University of KwaZulu-Natal, South Africa. I am currently dealing with=20 BASINS 4.0 and am incorporating it into my research project, where the=20 PLOAD model is my focal point. I am using the PLOAD model for the=20 Hartbeespoort Dam, situated in the North West province of South Africa,=20 which is a very problematic reservoir with extensive eutrophication=20 taking place. I think BASINS 4.0 is a really great program and can be=20 used extensively in the future. >=20 >But, I seem to have a problem using the simple (EMC) method in PLOAD. = I=20 am modeling PO4 and total nitrogen (TN). The problem is the output,=20 where the Load and load per acre output shapefiles (lbs) seem to be=20 extremely low (in between 5 x 10-7 and 2.7 x 10-5 lbs). I'm thinking=20 the calculations involved are not multiplying the area of the=20 quaternary catchments (which are in square meters) for the output.=20 Below is what I have been inserting for the input. >=20 >General tab: I am using the quaternary cathment layer for the Subbasins=20= layer. Land Use Type is 'Other Shapefile', as the USGS GIRAS shapefile=20 does not work in South Africa. >=20 >Precipitation: Have specified precipitation for each Subbasin (in=20 inches), with the subbasin ID field set to AREA. >=20 >Land Use: Have selected the land use layer (namely Transformed=20 Rangelands) and the Land Use ID Field to SYMBOL_COL (which is the field=20 in the attribute table containing values corresponding to those in the=20 EMC table) >=20 >Event Mean Concentration: I have altered a few values here, but I = don't=20 think this will make a difference to the output I am having problems=20 with. =20 >=20 >I am not dealing with the remaining tabs (Point Sources, BMPs and Bank=20 Erosion) for my project. >=20 >Please could you help me. If there is and additional information=20 regarding my procedures, please don't hesitate to ask. >=20 >Thank you. >=20 >Regards, >=20 >B.R.Eady >=20 >UKZN Honours Student=20 >(Applied Environmental Science) > >Please find our Email Disclaimer here: http://www.ukzn.ac.za/disclaimer/= =20 > >------------------------------------------ >You are currently subscribed to the basinsinfo listserver.=20 > >To unsubscribe, send the words unsubscribe basinsinfo to=20 lyris@lists.epa.gov=20 >OR: >Use the listserver's web interface at=20 https://lists.epa.gov/cgi-bin/lyris.pl to manage your=20 >subscription. >OR >Contact the basinsinfo listserver owner at=20 basinsinfo-Owner@lists.epa.gov=20 >------------------------------------------ ------------------------------------------ You are currently subscribed to the basinsinfo listserver.=20 To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.go= v=20 OR: Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.p= l to manage your=20 subscription. OR Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov= =20 ------------------------------------------ Please find our Email Disclaimer here: http://www.ukzn.ac.za/disclaimer/ ----------------------------------------------------------- X-Message-Number: 7 X-lyris-Id: 173527 Date: Thu, 04 Sep 2008 09:06:23 -0700 From: "Ching-piau Lai" Subject: GIS Layer index error This is a MIME message. If you are reading this text, you may want to consider changing to a mail reader or gateway that understands how to properly handle MIME multipart messages. --=__Part88A10D6F.0__= Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: quoted-printable Hi all: Can any one of you help me resolve the following problem occurred when I = set up a project for HSPF model using BASINS 4.0 ? I didn't get this = problem when using BASINS 3.1. =20 " An error occurred:GisUtil:LayerIndex:Error:LayorName:L_SANBCA:IsNotRecogn= iged"=20 =20 Thank you for your help in advance. =20 =20 =20 =20 =20 C.P. Lai, Ph.D., P.E. Water Resources Control Engineer California Regional Water Quality Control Board Los Angeles Region TMDL 3=20 320 West 4th Street, Suite 200 Los Angeles, CA 90013 (213)576-6951 clai@waterboards.ca.gov --=__Part88A10D6F.0__= Content-Type: text/html; charset=US-ASCII Content-Transfer-Encoding: quoted-printable Content-Description: HTML
Hi all:
Can any one of you help me resolve the following problem occurred = when I set up a project for HSPF model using BASINS 4.0 ? I didn't get = this problem when using BASINS 3.1.  
" An error occurred:GisUtil:LayerIndex:Error:LayorName:L_SANBCA:IsNotR= ecogniged" 
 
 Thank you for your help in advance.
 
 
 
 
 
C.P. Lai, Ph.D., P.E.
Water Resources Control = Engineer
California Regional Water Quality Control Board
Los Angeles = Region
TMDL 3
320 West 4th Street, Suite 200
Los Angeles, CA = 90013
(213)576-6951
clai@waterboards.ca.gov --=__Part88A10D6F.0__=-- ----------------------------------------------------------- X-Message-Number: 8 X-lyris-Id: 173545 Date: Fri, 5 Sep 2008 10:57:23 -0400 From: "Paul Duda" Subject: RE: GIS Layer index error This is a multi-part message in MIME format. ------=_NextPart_000_0014_01C90F46.2D0EC5C0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Edwin, Assuming you have downloaded and added the GIRAS landuse data to your project, you've run into a problem that has been addressed in the latest BASINS 4.0 update. (See http://www.epa.gov/waterscience/ftp/basins/system/BASINS4/) For a quick work-around you can just change the name of the layer "Land Use sanbca" so that it shows up in the MapWindow table of contents as "L_SANBCA" and run the HSPF setup tool again. Paul Duda AQUA TERRA Consultants -----Original Message----- From: Ching-piau Lai [mailto:clai@waterboards.ca.gov] Sent: Thursday, September 04, 2008 12:06 PM To: Private list for BASINS users Subject: [basinsinfo] GIS Layer index error Hi all: Can any one of you help me resolve the following problem occurred when I set up a project for HSPF model using BASINS 4.0 ? I didn't get this problem when using BASINS 3.1. " An error occurred:GisUtil:LayerIndex:Error:LayorName:L_SANBCA:IsNotRecogniged" Thank you for your help in advance. C.P. Lai, Ph.D., P.E. Water Resources Control Engineer California Regional Water Quality Control Board Los Angeles Region TMDL 3 320 West 4th Street, Suite 200 Los Angeles, CA 90013 (213)576-6951 clai@waterboards.ca.gov ------------------------------------------ You are currently subscribed to the basinsinfo listserver. To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov OR: Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your subscription. OR Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov ------------------------------------------ ---------------------------------------------------------------------------- -- If this email is spam, report it here: http://www.OnlyMyEmail.com/ReportSpam ------=_NextPart_000_0014_01C90F46.2D0EC5C0 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

Edwin,

Assuming you have downloaded and = added the=20 GIRAS landuse data to your project, you've run into a problem that = has been=20 addressed in the latest BASINS 4.0 update.  (See http:= //www.epa.gov/waterscience/ftp/basins/system/BASINS4/) =20 For a quick work-around you can just change the name of the = layer=20 "Land Use sanbca" so that = it shows up=20 in the MapWindow table of contents as "L_SANBCA" and run=20 the HSPF setup tool again.

Paul Duda

AQUA TERRA Consultants

-----Original = Message-----
From: Ching-piau Lai=20 [mailto:clai@waterboards.ca.gov]
Sent: Thursday, September = 04, 2008=20 12:06 PM
To: Private list for BASINS = users
Subject:=20 [basinsinfo] GIS Layer index error

Hi all:
Can any one of you help me resolve the following problem occurred = when I=20 set up a project for HSPF model using BASINS 4.0 ? I didn't get this = problem=20 when using BASINS 3.1.  
" An error=20 = occurred:GisUtil:LayerIndex:Error:LayorName:L_SANBCA:IsNotRecogniged"&nbs= p;
 
 Thank you for your help in advance.
 
 
 
 
 
C.P. Lai, Ph.D., P.E.
Water Resources Control=20 Engineer
California Regional Water Quality Control Board
Los = Angeles=20 Region
TMDL 3
320 West 4th Street, Suite 200
Los Angeles, CA = = 90013
(213)576-6951
clai@waterboards.ca.gov
---------------=
---------------------------
You are currently subscribed to the basinsinfo listserver.=20

To unsubscribe, send the words unsubscribe basinsinfo to =
lyris@lists.epa.gov
OR:
Use the listserver's web interface at =
https://lists.epa.gov/cgi-bin/lyris.pl to manage your=20
subscription.
OR
Contact the basinsinfo listserver owner at =
basinsinfo-Owner@lists.epa.gov
------------------------------------------

If=20 this email is spam, report it here:
http://www.OnlyMyEmail.com= /ReportSpam=20
------=_NextPart_000_0014_01C90F46.2D0EC5C0-- ----------------------------------------------------------- X-Message-Number: 9 X-lyris-Id: 173639 Date: Mon, 8 Sep 2008 20:50:15 -0000 From: "Mery Apple" Subject: Watershed Delineation Does anyone know how to get the stream reaches and sub-basins to match with the National Hydrography Dataset? When I delineate my watershed some important streams are not represented. I have tried to use the AWD tool and check "Burn-in Existing Streams Polyline" with National Hydrography Data layer selected. Yet this is not accurately representing my watershed. I will really appreciate any suggestions or ideas? Thanks, Mery Apple ----------------------------------------------------------- X-Message-Number: 10 X-lyris-Id: 173836 Date: Fri, 12 Sep 2008 23:17:45 -0000 From: "Mery Apple" Subject: Problems with BASINS Update I installed the 08/2008 BASINS Update and now I can not run HSPF. The Error is: "An error has occured in MapWindow or in a plug-in" Has anyone else had this problem? Does anyone have any suggestions on how to fix this? Mery Apple ----------------------------------------------------------- X-Message-Number: 11 X-lyris-Id: 173837 Date: Sat, 13 Sep 2008 06:31:40 -0700 (PDT) From: Lauren Felker Subject: Re: Problems with BASINS Update --0-979699727-1221312700=:25313 Content-Type: text/plain; charset=us-ascii Mery, I have had the same problem as well. The error says: "System.ArgumentException: An item with the same key has already been added," if you look at what the error report is sending, at least for me. I tried reinstalling basins, but this didn't solve my problem. I haven't figured out a solution either. Lauren ----- Original Message ---- From: Mery Apple To: Private list for BASINS users Sent: Friday, September 12, 2008 7:17:45 PM Subject: [basinsinfo] Problems with BASINS Update I installed the 08/2008 BASINS Update and now I can not run HSPF. The Error is: "An error has occured in MapWindow or in a plug-in" Has anyone else had this problem? Does anyone have any suggestions on how to fix this? Mery Apple ------------------------------------------ You are currently subscribed to the basinsinfo listserver. To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov OR: Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your subscription. OR Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov ------------------------------------------ --0-979699727-1221312700=:25313 Content-Type: text/html; charset=us-ascii
Mery,

I have had the same problem as well. The error says: "System.ArgumentException: An item with the same key has already been added," if you look at what the error report is sending, at least for me. I tried reinstalling basins, but this didn't solve my problem. I haven't figured out a solution either.

Lauren

----- Original Message ----
From: Mery Apple <mery@hawaii.edu>
To: Private list for BASINS users <basinsinfo@lists.epa.gov>
Sent: Friday, September 12, 2008 7:17:45 PM
Subject: [basinsinfo] Problems with BASINS Update

I installed the 08/2008 BASINS Update and now I can not run HSPF. 

The Error is:

"An error has occured in MapWindow or in a plug-in"

Has anyone else had this problem?  Does anyone have any suggestions on how to fix this?

Mery Apple
------------------------------------------
You are currently subscribed to the basinsinfo listserver.

To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov
OR:
Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your
subscription.
OR
Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov
---------------------------------------- --

--0-979699727-1221312700=:25313-- ----------------------------------------------------------- X-Message-Number: 12 X-lyris-Id: 173839 Date: Mon, 15 Sep 2008 04:39:56 -0000 From: "Mery Apple" Subject: Re: Problems with BASINS Update The only way I have found to work around it is to use the 08/2008 update to delineate my watershed the way I want. Then I un-install and re-install the previous version. This seems ridiculous and very time consuming. I am not sure why the problem is occurring. I have a feeling it is related to my land use layer that I am using which I have to add in manually. I do think it is a bug though. ----------------------------------------------------------- X-Message-Number: 13 X-lyris-Id: 173840 Date: Mon, 15 Sep 2008 07:58:42 -0400 From: "Paul Duda" Subject: RE: Problems with BASINS Update Hi Mery, We've had good success using this update to setup HSPF, so it must be = something particular about the options you've chosen. If you can send = me a more detailed report, I'll be happy to take a look. Since you seem to suspect your land use might be related, I suggest = letting me know the characteristics of the land use layer, ie shapefile = or grid, which options did you specify in the land use tab, etc. If = there are more details in the error message (usually there is something = that says something like click here to show the details of the error), = you could copy that into an email and send it to me. If you want to send me some attachments remember to send them directly = to me (the listserve will strip the attachments from the message. Paul -----Original Message----- From: Mery Apple [mailto:mery@hawaii.edu] Sent: Friday, September 12, 2008 7:18 PM To: Private list for BASINS users Subject: [basinsinfo] Problems with BASINS Update I installed the 08/2008 BASINS Update and now I can not run HSPF. =20 The Error is: "An error has occured in MapWindow or in a plug-in" Has anyone else had this problem? Does anyone have any suggestions on = how to fix this? Mery Apple ------------------------------------------ You are currently subscribed to the basinsinfo listserver.=20 To unsubscribe, send the words unsubscribe basinsinfo to = lyris@lists.epa.gov OR: Use the listserver's web interface at = https://lists.epa.gov/cgi-bin/lyris.pl to manage your=20 subscription. OR Contact the basinsinfo listserver owner at = basinsinfo-Owner@lists.epa.gov ------------------------------------------ -- If this email is spam, report it here: http://www.onlymyemail.com/view/?action=3DreportSpam&Id=3DMTcyMzc6NzQ0MTA= xNDU1OnBiZHVkYUBhcXVhdGVycmEuY29t ----------------------------------------------------------- X-Message-Number: 14 X-lyris-Id: 173842 Date: Mon, 15 Sep 2008 06:36:12 -0700 (PDT) From: Lauren Felker Subject: Basins to HSPF error --0-1189499041-1221485772=:88982 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Hello all. =0A=0AHere is the content of the error I'm getting when I try to= create an HSPF project with the latest version of Basins: =0A=0ABASINS 4 4= .5.3048 (5/6/2008)=0ASystem.ArgumentException: An item with the same key ha= s already been added.=0A=A0=A0 at System.ThrowHelper.ThrowArgumentException= (ExceptionResource resource)=0A=A0=A0 at System.Collections.Generic.Diction= ary`2.Insert(TKey key, TValue value, Boolean add)=0A=A0=A0 at System.Collec= tions.ObjectModel.KeyedCollection`2.AddKey(TKey key, TItem item)=0A=A0=A0 a= t System.Collections.ObjectModel.KeyedCollection`2.InsertItem(Int32 index, = TItem item)=0A=A0=A0 at System.Collections.ObjectModel.Collection`1.Add(T i= tem)=0A=A0=A0 at atcModelSetup.frmModelSetup.CreateReachSegments(atcCollect= ion aSubbasinsSelected, atcCollection aSubbasinsModelSegmentIds)=0A=A0=A0 a= t atcModelSetup.frmModelSetup.SetupHSPF(String aOutputPath, String aBaseOut= putName)=0A=A0=A0 at atcModelSetup.frmModelSetup.cmdOK_Click(Object sender,= EventArgs e)=0A=A0=A0 at System.Windows.Forms.Control.OnClick(EventArgs e)= =0A=A0=A0 at System.Windows.Forms.Button.OnClick(EventArgs e)=0A=A0=A0 at S= ystem.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)=0A=A0=A0 at Sys= tem.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 = clicks)=0A=A0=A0 at System.Windows.Forms.Control.WndProc(Message& m)=0A=A0= =A0 at System.Windows.Forms.ButtonBase.WndProc(Message& m)=0A=A0=A0 at Syst= em.Windows.Forms.Button.WndProc(Message& m)=0A=A0=A0 at System.Windows.Form= s.Control.ControlNativeWindow.OnMessage(Message& m)=0A=A0=A0 at System.Wind= ows.Forms.Control.ControlNativeWindow.WndProc(Message& m)=0A=A0=A0 at Syste= m.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam= , IntPtr lparam)=0AMapWinUtility (debug reporter) Assmebly Version: 2.0.42.= 50727=0AOperating System: Win32NT=0AService Pack: Service Pack 3, v.3264=0A= Major Version:=A05=0AMinor Version:=A01=0ARevision:=A0=A03=0ABuild:=A0=A026= 00=0A=0ACan anyone give me any insight on this issue?=0A=0AThanks!=0ALauren= =0A=0A=0A=0A --0-1189499041-1221485772=:88982 Content-Type: text/html; charset=us-ascii
Hello all.
 
Here is the content of the error I'm getting when I try to create an HSPF project with the latest version of Basins:
 
BASINS 4 4.5.3048 (5/6/2008)
System.ArgumentException: An item with the same key has already been added.
   at System.ThrowHelper.ThrowArgumentException(ExceptionResource resource)
   at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
   at System.Collections.ObjectModel.KeyedCollection`2.AddKey(TKey key, TItem item)
   at System.Collections.ObjectModel.KeyedCollection`2.InsertItem(Int32 index, TItem item)
   at System.Collections.ObjectModel.Collection`1.Add(T item)
   at atcModelSetup.frmModelSetup.CreateReachSegments(atcCollection aSubbasinsSelected, atcCollection aSubbasinsModelSegmentIds)
   at atcModelSetup.frmModelSetup.SetupHSPF(String aOutputPath, String aBaseOutputName)
   at atcModelSetup.frmModelSetup.cmdOK_Click(Object sender, EventArgs e)
   at System.Windows.Forms.Control.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ButtonBase.WndProc(Message& m)
   at System.Windows.Forms.Button.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
MapWinUtility (debug reporter) Assmebly Version: 2.0.42.50727
Operating System: Win32NT
Service Pack: Service Pack 3, v.3264
Major Version: 5
Minor Version: 1
Revision:  3
Build:  2600
 
Can anyone give me any insight on this issue?
 
Thanks!
Lauren
 

--0-1189499041-1221485772=:88982-- ----------------------------------------------------------- X-Message-Number: 15 X-lyris-Id: 173843 Date: Mon, 15 Sep 2008 08:58:45 -0500 From: "Jay D. Davis" Subject: RE: Problems with BASINS Update Good morning BASINners While I claim no programming expertise, a few courses does not a programmer make, one sevier weakness I consistently see in programming is generic error messages, especially those with numbers and some "DUH" statement. The programmer should, perhaps with much weeping, wailing and gnashing of teeth, be able to put some meaning to the statements. Rather than "Error 420097. Input rejected." How about "Error 420097. Decimal data required." Put some meaning to the error codes, please. Even more enraging are the "click here for detail errors" or "consult the (error) log for details", whereupon the Microsoft double-click, one finds "Error 420097. Input rejected." Circulus improbondo!! jd -----Original Message----- From: Paul Duda [mailto:pbduda@aquaterra.com] Sent: Monday, September 15, 2008 6:59 AM To: Private list for BASINS users Subject: RE: [basinsinfo] Problems with BASINS Update Hi Mery, We've had good success using this update to setup HSPF, so it must be something particular about the options you've chosen. If you can send me a more detailed report, I'll be happy to take a look. Since you seem to suspect your land use might be related, I suggest letting me know the characteristics of the land use layer, ie shapefile or grid, which options did you specify in the land use tab, etc. If there are more details in the error message (usually there is something that says something like click here to show the details of the error), you could copy that into an email and send it to me. If you want to send me some attachments remember to send them directly to me (the listserve will strip the attachments from the message. Paul -----Original Message----- From: Mery Apple [mailto:mery@hawaii.edu] Sent: Friday, September 12, 2008 7:18 PM To: Private list for BASINS users Subject: [basinsinfo] Problems with BASINS Update I installed the 08/2008 BASINS Update and now I can not run HSPF. The Error is: "An error has occured in MapWindow or in a plug-in" Has anyone else had this problem? Does anyone have any suggestions on how to fix this? Mery Apple ------------------------------------------ You are currently subscribed to the basinsinfo listserver. To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov OR: Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your subscription. OR Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov ------------------------------------------ -- If this email is spam, report it here: http://www.onlymyemail.com/view/?action=reportSpam&Id=MTcyMzc6NzQ0MTAxNDU1On BiZHVkYUBhcXVhdGVycmEuY29t ------------------------------------------ You are currently subscribed to the basinsinfo listserver. To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov OR: Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your subscription. OR Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov ------------------------------------------ ----------------------------------------------------------- X-Message-Number: 16 X-lyris-Id: 173846 Date: Mon, 15 Sep 2008 09:11:28 -0500 From: "Jay D. Davis" Subject: RE: Basins to HSPF error This is a multi-part message in MIME format. ------=_NextPart_000_0052_01C91713.0A013AC0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit This is one of the more detailed error info pullouts I have seen. But, I still get lost trying to trace it through. I understand Lauren's frustration. jd _____ From: Lauren Felker [mailto:emerson924@yahoo.com] Sent: Monday, September 15, 2008 8:36 AM To: Private list for BASINS users Subject: [basinsinfo] Basins to HSPF error Hello all. Here is the content of the error I'm getting when I try to create an HSPF project with the latest version of Basins: BASINS 4 4.5.3048 (5/6/2008) System.ArgumentException: An item with the same key has already been added. at System.ThrowHelper.ThrowArgumentException(ExceptionResource resource) at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add) at System.Collections.ObjectModel.KeyedCollection`2.AddKey(TKey key, TItem item) at System.Collections.ObjectModel.KeyedCollection`2.InsertItem(Int32 index, TItem item) at System.Collections.ObjectModel.Collection`1.Add(T item) at atcModelSetup.frmModelSetup.CreateReachSegments(atcCollection aSubbasinsSelected, atcCollection aSubbasinsModelSegmentIds) at atcModelSetup.frmModelSetup.SetupHSPF(String aOutputPath, String aBaseOutputName) at atcModelSetup.frmModelSetup.cmdOK_Click(Object sender, EventArgs e) at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnClick(EventArgs e) at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ButtonBase.WndProc(Message& m) at System.Windows.Forms.Button.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) MapWinUtility (debug reporter) Assmebly Version: 2.0.42.50727 Operating System: Win32NT Service Pack: Service Pack 3, v.3264 Major Version: 5 Minor Version: 1 Revision: 3 Build: 2600 Can anyone give me any insight on this issue? Thanks! Lauren ------------------------------------------ You are currently subscribed to the basinsinfo listserver. To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov OR: Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your subscription. OR Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov ------------------------------------------ ------=_NextPart_000_0052_01C91713.0A013AC0 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

This is one of the more detailed = error info pullouts I have seen.  But, I still get lost trying to trace = it through.   I understand Lauren’s frustration.

 

jd

 

From: = Lauren Felker [mailto:emerson924@yahoo.com]
Sent: Monday, September = 15, 2008 8:36 AM
To: Private list for = BASINS users
Subject: [basinsinfo] = Basins to HSPF error

 

Hello all.

 

Here is the content of the error I'm getting when I try to = create an HSPF project with the latest version of Basins: =

 

BASINS 4 4.5.3048 (5/6/2008)

System.ArgumentException: An item with the same key has already = been added.
   at = System.ThrowHelper.ThrowArgumentException(ExceptionResource resource)
   at System.Collections.Generic.Dictionary`2.Insert(TKey key, = TValue value, Boolean add)
   at = System.Collections.ObjectModel.KeyedCollection`2.AddKey(TKey key, TItem item)
   at System.Collections.ObjectModel.KeyedCollection`2.InsertItem(Int32 index, = TItem item)
   at System.Collections.ObjectModel.Collection`1.Add(T = item)
   at = atcModelSetup.frmModelSetup.CreateReachSegments(atcCollection aSubbasinsSelected, atcCollection aSubbasinsModelSegmentIds)
   at atcModelSetup.frmModelSetup.SetupHSPF(String = aOutputPath, String aBaseOutputName)
   at atcModelSetup.frmModelSetup.cmdOK_Click(Object sender, EventArgs e)
   at System.Windows.Forms.Control.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs = mevent)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ButtonBase.WndProc(Message& = m)
   at System.Windows.Forms.Button.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& = m)
   at = System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, = Int32 msg, IntPtr wparam, IntPtr lparam)

MapWinUtility (debug reporter) Assmebly Version: = 2.0.42.50727
Operating System: Win32NT
Service Pack: Service Pack 3, v.3264
Major Version: 5
Minor Version: 1
Revision:  3
Build:  2600

 

Can anyone give me any insight on this = issue?

 

Thanks!

Lauren

 

 

------------------------------------------
You are =
currently subscribed to the basinsinfo listserver. =

 
To =
unsubscribe, send the words unsubscribe basinsinfo to =
lyris@lists.epa.gov
OR:
Use the =
listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to =
manage your 
subscription.
OR
Contact =
the basinsinfo listserver owner at =
basinsinfo-Owner@lists.epa.gov
------------------------------------------
------=_NextPart_000_0052_01C91713.0A013AC0-- ----------------------------------------------------------- X-Message-Number: 17 X-lyris-Id: 173847 Date: Mon, 15 Sep 2008 10:12:33 -0400 From: "Paul Duda" Subject: RE: Basins to HSPF error This is a multi-part message in MIME format. ------=_NextPart_000_002E_01C9171B.920E8230 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit I think this problem must be related to the attributes of the streams shapefile that you are using. The HSPF setup tool requires that there be one and only one stream segment per subbasin, and each stream segment must have a unique id in the shapefile attribute table. This rule is enforced by the BASINS delineation tools, but if you are using your own imported delineations I can see how it might be violated. You might need to run the manual delineator to define the stream network and calculate the stream attributes before starting the model setup tool. Paul Duda AQUA TERRA Consultants -----Original Message----- From: Lauren Felker [mailto:emerson924@yahoo.com] Sent: Monday, September 15, 2008 9:36 AM To: Private list for BASINS users Subject: [basinsinfo] Basins to HSPF error Hello all. Here is the content of the error I'm getting when I try to create an HSPF project with the latest version of Basins: BASINS 4 4.5.3048 (5/6/2008) System.ArgumentException: An item with the same key has already been added. at System.ThrowHelper.ThrowArgumentException(ExceptionResource resource) at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add) at System.Collections.ObjectModel.KeyedCollection`2.AddKey(TKey key, TItem item) at System.Collections.ObjectModel.KeyedCollection`2.InsertItem(Int32 index, TItem item) at System.Collections.ObjectModel.Collection`1.Add(T item) at atcModelSetup.frmModelSetup.CreateReachSegments(atcCollection aSubbasinsSelected, atcCollection aSubbasinsModelSegmentIds) at atcModelSetup.frmModelSetup.SetupHSPF(String aOutputPath, String aBaseOutputName) at atcModelSetup.frmModelSetup.cmdOK_Click(Object sender, EventArgs e) at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnClick(EventArgs e) at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ButtonBase.WndProc(Message& m) at System.Windows.Forms.Button.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) MapWinUtility (debug reporter) Assmebly Version: 2.0.42.50727 Operating System: Win32NT Service Pack: Service Pack 3, v.3264 Major Version: 5 Minor Version: 1 Revision: 3 Build: 2600 Can anyone give me any insight on this issue? Thanks! Lauren ------------------------------------------ You are currently subscribed to the basinsinfo listserver. To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov OR: Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your subscription. OR Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov ------------------------------------------ ---------------------------------------------------------------------------- -- If this email is spam, report it here: http://www.OnlyMyEmail.com/ReportSpam ------=_NextPart_000_002E_01C9171B.920E8230 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
I=20 think this problem must be related to the attributes of the streams = shapefile=20 that you are using.  The HSPF setup tool requires that there be one = and=20 only one stream segment per subbasin, and each stream segment must have = a unique=20 id in the shapefile attribute table.  This rule is enforced by the = BASINS=20 delineation tools, but if you are using your own imported delineations I = can see=20 how it might be violated. 
 
You=20 might need to run the manual delineator to define the stream network and = calculate the stream attributes before starting the model setup=20 tool.
 
Paul=20 Duda
AQUA=20 TERRA Consultants
-----Original Message-----
From: Lauren Felker=20 [mailto:emerson924@yahoo.com]
Sent: Monday, September 15, = 2008 9:36=20 AM
To: Private list for BASINS users
Subject: = [basinsinfo]=20 Basins to HSPF error

Hello all.
 
Here is the content of the error I'm getting when I try to create = an HSPF=20 project with the latest version of Basins:
 
BASINS 4 4.5.3048 (5/6/2008)
System.ArgumentException: An item with the same key has already = been=20 added.
   at=20 System.ThrowHelper.ThrowArgumentException(ExceptionResource=20 resource)
   at=20 System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, = Boolean=20 add)
   at=20 System.Collections.ObjectModel.KeyedCollection`2.AddKey(TKey key, = TItem=20 item)
   at=20 System.Collections.ObjectModel.KeyedCollection`2.InsertItem(Int32 = index, TItem=20 item)
   at = System.Collections.ObjectModel.Collection`1.Add(T=20 item)
   at=20 atcModelSetup.frmModelSetup.CreateReachSegments(atcCollection=20 aSubbasinsSelected, atcCollection = aSubbasinsModelSegmentIds)
  =20 at atcModelSetup.frmModelSetup.SetupHSPF(String aOutputPath, String=20 aBaseOutputName)
   at=20 atcModelSetup.frmModelSetup.cmdOK_Click(Object sender, EventArgs=20 e)
   at System.Windows.Forms.Control.OnClick(EventArgs=20 e)
   at System.Windows.Forms.Button.OnClick(EventArgs=20 e)
   at = System.Windows.Forms.Button.OnMouseUp(MouseEventArgs=20 mevent)
   at = System.Windows.Forms.Control.WmMouseUp(Message&=20 m, MouseButtons button, Int32 clicks)
   at=20 System.Windows.Forms.Control.WndProc(Message& m)
   = at=20 System.Windows.Forms.ButtonBase.WndProc(Message& = m)
   at=20 System.Windows.Forms.Button.WndProc(Message& m)
   at = = System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message&=20 m)
   at=20 System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message&=20 m)
   at = System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd,=20 Int32 msg, IntPtr wparam, IntPtr lparam)
MapWinUtility (debug reporter) Assmebly Version:=20 2.0.42.50727
Operating System: Win32NT
Service Pack: Service = Pack 3,=20 v.3264
Major Version: 5
Minor=20 = Version: 1
Revision:  3
Build:  2600
=
 
Can anyone give me any insight on this issue?
 
Thanks!
Lauren
=
 


-------------------------------------=
-----
You are currently subscribed to the basinsinfo listserver.=20

To unsubscribe, send the words unsubscribe basinsinfo to =
lyris@lists.epa.gov
OR:
Use the listserver's web interface at =
https://lists.epa.gov/cgi-bin/lyris.pl to manage your=20
subscription.
OR
Contact the basinsinfo listserver owner at =
basinsinfo-Owner@lists.epa.gov
------------------------------------------

If=20 this email is spam, report it here:
http://www.OnlyMyEmail.com= /ReportSpam=20 ------=_NextPart_000_002E_01C9171B.920E8230-- ----------------------------------------------------------- X-Message-Number: 18 X-lyris-Id: 173884 Date: Mon, 15 Sep 2008 18:14:38 -0000 From: "Mery Apple" Subject: RE: Problems with BASINS Update Paul, Thanks for the response. Here is the error message. My landuse is a shapefile. I specified other shapefile and selected my file in the landuse tab with the classification feild as discription (i.e. agriculture, urban, forest, etc.) Let me know what you suggest I try. Thanks, Mery Apple BASINS 4 4.5.3048 (5/6/2008) System.InvalidCastException: Conversion from string "Agricultural Land" to type 'Integer' is not valid. ---> System.FormatException: Input string was not in a correct format. at Microsoft.VisualBasic.CompilerServices.Conversions.ParseDouble(String Value, NumberFormatInfo NumberFormat) at Microsoft.VisualBasic.CompilerServices.Conversions.ToInteger(String Value) --- End of inner exception stack trace --- at Microsoft.VisualBasic.CompilerServices.Conversions.ToInteger(String Value) at Microsoft.VisualBasic.CompilerServices.Conversions.ToInteger(Object Value) at atcModelSetup.frmModelSetup.CreateLanduses(atcCollection aSubbasinsSlopes, Collection aLucodes, Collection aSubids, Collection aAreas, Reaches aReaches) at atcModelSetup.frmModelSetup.SetupHSPF(String aOutputPath, String aBaseOutputName) at atcModelSetup.frmModelSetup.cmdOK_Click(Object sender, EventArgs e) at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnClick(EventArgs e) at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ButtonBase.WndProc(Message& m) at System.Windows.Forms.Button.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) MapWinUtility (debug reporter) Assmebly Version: 2.0.1433.50727 Operating System: Win32NT Service Pack: Service Pack 3 Major Version: 5 Minor Version: 1 Revision: 3 Build: 2600 ------------------------------------------------- Logical Drives: C:\ D:\ System Directory: C:\WINDOWS\system32 Current Directory: C:\Basins\bin Command Line: "C:\Basins\bin\MapWindow.exe" Command Line Args: C:\Basins\bin\MapWindow.exe ------------Environment Variables----------------- Path == C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\ATI Technologies\ATI.ACE\;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared\;c:\matlab_sv13\bin\win32;C:\Basins\models\HSPEXP\hspexp2.4 \bin;C:\Program Files\QuickTime\QTSystem\;C:\BMDPNS2\DYNAMIC TEMP == C:\DOCUME~1\mery\LOCALS~1\Temp SESSIONNAME == Console PATHEXT == .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH USERDOMAIN == APPLE PROCESSOR_ARCHITECTURE == x86 SystemDrive == C: RoxioCentral == C:\Program Files\Common Files\Roxio Shared\9.0\Roxio Central33\ APPDATA == C:\Documents and Settings\mery\Application Data windir == C:\WINDOWS TMP == C:\DOCUME~1\mery\LOCALS~1\Temp USERPROFILE == C:\Documents and Settings\mery ProgramFiles == C:\Program Files FP_NO_HOST_CHECK == NO HOMEPATH == \Documents and Settings\mery COMPUTERNAME == APPLE CLASSPATH == .;C:\Program Files\Java\jre1.5.0_06\lib\ext\QTJava.zip USERNAME == mery NUMBER_OF_PROCESSORS == 2 PROCESSOR_IDENTIFIER == x86 Family 15 Model 104 Stepping 1, AuthenticAMD ComSpec == C:\WINDOWS\system32\cmd.exe PYTHONPATH == C:\Program Files\ArcGIS\bin DNEWS == C:\BMDPNS2\DYNAMIC LOGONSERVER == \\APPLE CommonProgramFiles == C:\Program Files\Common Files ARCGISHOME == C:\Program Files\ArcGIS\ SystemRoot == C:\WINDOWS PROCESSOR_LEVEL == 15 PROCESSOR_REVISION == 6801 PROJ_LIB == C:\Basins\bin\PROJ_NAD QTJAVA == C:\Program Files\Java\jre1.5.0_06\lib\ext\QTJava.zip ALLUSERSPROFILE == C:\Documents and Settings\All Users OS == Windows_NT HOMEDRIVE == C: ------------Performance Info (Bytes)-------------- Private Memory: 631033856 tVirtual Memory: 873426944 Total CPU time: 00:00:50.1406250 Total User Mode CPU time: 00:00:20.8125000 ------------Module Info:-------------------------- ----Module Name: MapWindow.exe Path: C:\Basins\bin\MapWindow.exe Version: 4.5.3048.25994 ----Module Name: ntdll.dll Path: C:\WINDOWS\system32\ntdll.dll Version: 5.1.2600.5512 (xpsp.080413-2111) ----Module Name: mscoree.dll Path: C:\WINDOWS\system32\mscoree.dll Version: 2.0.50727.1433 (REDBITS.050727-1400) ----Module Name: KERNEL32.dll Path: C:\WINDOWS\system32\KERNEL32.dll Version: 5.1.2600.5512 (xpsp.080413-2111) ----Module Name: ADVAPI32.dll Path: C:\WINDOWS\system32\ADVAPI32.dll Version: 5.1.2600.5512 (xpsp.080413-2113) ----Module Name: RPCRT4.dll Path: C:\WINDOWS\system32\RPCRT4.dll Version: 5.1.2600.5512 (xpsp.080413-2108) ----Module Name: Secur32.dll Path: C:\WINDOWS\system32\Secur32.dll Version: 5.1.2600.5512 (xpsp.080413-2113) ----Module Name: SHLWAPI.dll Path: C:\WINDOWS\system32\SHLWAPI.dll Version: 6.00.2900.5512 (xpsp.080413-2105) ----Module Name: GDI32.dll Path: C:\WINDOWS\system32\GDI32.dll Version: 5.1.2600.5512 (xpsp.080413-2105) ----Module Name: USER32.dll Path: C:\WINDOWS\system32\USER32.dll Version: 5.1.2600.5512 (xpsp.080413-2105) ----Module Name: msvcrt.dll Path: C:\WINDOWS\system32\msvcrt.dll Version: 7.0.2600.5512 (xpsp.080413-2111) ----Module Name: IMM32.DLL Path: C:\WINDOWS\system32\IMM32.DLL Version: 5.1.2600.5512 (xpsp.080413-2105) ----Module Name: mscorwks.dll Path: c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\mscorwks.dll Version: 2.0.50727.1433 (REDBITS.050727-1400) ----Module Name: MSVCR80.dll Path: C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.1433_x-ww_5c f844d2\MSVCR80.dll Version: 8.00.50727.1433 ----Module Name: shell32.dll Path: C:\WINDOWS\system32\shell32.dll Version: 6.00.2900.5512 (xpsp.080413-2105) ----Module Name: comctl32.dll Path: C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.260 0.5512_x-ww_35d4ce83\comctl32.dll Version: 6.0 (xpsp.080413-2105) ----Module Name: comctl32.dll Path: C:\WINDOWS\system32\comctl32.dll Version: 5.82 (xpsp.080413-2105) ----Module Name: mscorlib.ni.dll Path: C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\mscorlib\32e6f703c114f3a971cbe706 586e3655\mscorlib.ni.dll Version: 2.0.50727.1433 (REDBITS.050727-1400) ----Module Name: ole32.dll Path: C:\WINDOWS\system32\ole32.dll Version: 5.1.2600.5512 (xpsp.080413-2108) ----Module Name: MSCTF.dll Path: C:\WINDOWS\system32\MSCTF.dll Version: 5.1.2600.5512 (xpsp.080413-2105) ----Module Name: QOEHook.dll Path: C:\Program Files\CA\CA Internet Security Suite\CA Anti-Spam\QSP-5.1.18.0\QOEHook.dll Version: 5.1.18.0 ----Module Name: mscorjit.dll Path: c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\mscorjit.dll Version: 2.0.50727.1433 (REDBITS.050727-1400) ----Module Name: xpsp2res.dll Path: C:\WINDOWS\system32\xpsp2res.dll Version: 5.1.2600.5512 (xpsp.080413-2113) ----Module Name: MapWinInterfaces.dll Path: C:\Basins\bin\MapWinInterfaces.dll Version: 4.3.3034.36587 ----Module Name: System.ni.dll Path: C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\System\ba0e3a22211ba7343e0116b051 f2965a\System.ni.dll Version: 2.0.50727.1433 (REDBITS.050727-1400) ----Module Name: System.Drawing.ni.dll Path: C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\System.Drawing\0e83aac37b2623f1a2 4c70979f31dd56\System.Drawing.ni.dll Version: 2.0.50727.1433 (REDBITS.050727-1400) ----Module Name: System.Windows.Forms.ni.dll Path: C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\System.Windows.Forms\3d8c79c45aa6 74e43f075e2e66b8caf5\System.Windows.Forms.ni.dll Version: 2.0.50727.1433 (REDBITS.050727-1400) ----Module Name: System.Xml.ni.dll Path: C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\System.Xml\c98cb65a79cfccb44ea727 ebe4593ede\System.Xml.ni.dll Version: 2.0.50727.1433 (REDBITS.050727-1400) ----Module Name: Microsoft.VisualBasic.ni.dll Path: C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\Microsoft.VisualBas#\923bd5525838 0eae77353d36a5a1b08f\Microsoft.VisualBasic.ni.dll Version: 8.0.50727.1433 (REDBITS.050727-1400) ----Module Name: version.dll Path: C:\WINDOWS\system32\version.dll Version: 5.1.2600.5512 (xpsp.080413-2105) ----Module Name: IntellisenseEditor.dll Path: C:\Basins\bin\IntellisenseEditor.dll Version: 1.0.2743.27782 ----Module Name: msctfime.ime Path: C:\WINDOWS\system32\msctfime.ime Version: 5.1.2600.5512 (xpsp.080413-2105) ----Module Name: gdiplus.dll Path: C:\WINDOWS\WinSxS\x86_Microsoft.Windows.GdiPlus_6595b64144ccf1df_1.0.2600.5581_x -ww_dfbc4fc4\gdiplus.dll Version: 5.1.3102.5581 (xpsp_sp3_qfe.080415-1416) ----Module Name: rsaenh.dll Path: C:\WINDOWS\system32\rsaenh.dll Version: 5.1.2600.5507 (xpsp.080318-1711) ----Module Name: ICSharpCode.TextEditor.dll Path: C:\Basins\bin\ICSharpCode.TextEditor.dll Version: 2.1.0.2429 ----Module Name: ICSharpCode.SharpDevelop.Dom.dll Path: C:\Basins\bin\ICSharpCode.SharpDevelop.Dom.dll Version: 2.1.0.2429 ----Module Name: oleaut32.dll Path: C:\WINDOWS\system32\oleaut32.dll Version: 5.1.2600.5512 ----Module Name: log4net.dll Path: C:\Basins\bin\log4net.dll Version: 1.2.10.0 ----Module Name: System.Configuration.ni.dll Path: C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\System.Configuration\eee9b4857768 9e92db5a7b5c5de98d9b\System.Configuration.ni.dll Version: 2.0.50727.1433 (REDBITS.050727-1400) ----Module Name: MapWindow.resources.dll Path: C:\Basins\bin\en\MapWindow.resources.dll Version: 4.4.2801.28626 ----Module Name: MapWinUtility.dll Path: C:\Basins\bin\MapWinUtility.dll Version: 1.0.3096.24764 ----Module Name: uxtheme.dll Path: C:\WINDOWS\system32\uxtheme.dll Version: 6.00.2900.5512 (xpsp.080413-2105) ----Module Name: AxInterop.MapWinGIS.dll Path: C:\Basins\bin\AxInterop.MapWinGIS.dll Version: 3.0.0.0 ----Module Name: WeifenLuo.WinFormsUI.Docking.dll Path: C:\Basins\bin\WeifenLuo.WinFormsUI.Docking.dll Version: 2.2.0.0 ----Module Name: Interop.MapWinGIS.dll Path: C:\Basins\bin\Interop.MapWinGIS.dll Version: 3.0.0.0 ----Module Name: CLBCATQ.DLL Path: C:\WINDOWS\system32\CLBCATQ.DLL Version: 2001.12.4414.700 ----Module Name: COMRes.dll Path: C:\WINDOWS\system32\COMRes.dll Version: 2001.12.4414.700 ----Module Name: MAPWIN~1.OCX Path: C:\PROGRA~1\COMMON~1\MAPWIN~1\MAPWIN~1.OCX Version: 4.6.0.0 ----Module Name: ODBC32.dll Path: C:\WINDOWS\system32\ODBC32.dll Version: 3.525.1132.0 (xpsp.080413-0852) ----Module Name: comdlg32.dll Path: C:\WINDOWS\system32\comdlg32.dll Version: 6.00.2900.5512 (xpsp.080413-2105) ----Module Name: MFC71.DLL Path: C:\WINDOWS\system32\MFC71.DLL Version: 7.10.3077.0 ----Module Name: MSVCR71.dll Path: C:\WINDOWS\system32\MSVCR71.dll Version: 7.10.3052.4 ----Module Name: MSIMG32.dll Path: C:\WINDOWS\system32\MSIMG32.dll Version: 5.1.2600.5512 (xpsp.080413-2105) ----Module Name: MSVCP71.dll Path: C:\WINDOWS\system32\MSVCP71.dll Version: 7.10.3077.0 ----Module Name: WS2_32.dll Path: C:\WINDOWS\system32\WS2_32.dll Version: 5.1.2600.5512 (xpsp.080413-0852) ----Module Name: WS2HELP.dll Path: C:\WINDOWS\system32\WS2HELP.dll Version: 5.1.2600.5512 (xpsp.080413-0852) ----Module Name: odbcint.dll Path: C:\WINDOWS\system32\odbcint.dll Version: 3.525.1132.0 (xpsp.080413-0852) ----Module Name: MFC71ENU.DLL Path: C:\WINDOWS\system32\MFC71ENU.DLL Version: 7.10.3077.0 ----Module Name: SXS.DLL Path: C:\WINDOWS\system32\SXS.DLL Version: 5.1.2600.5512 (xpsp.080413-2111) ----Module Name: RichEd20.DLL Path: C:\WINDOWS\system32\RichEd20.DLL Version: 5.30.23.1230 ----Module Name: ArchiveTool.dll Path: C:\Basins\bin\Plugins\ArchiveTool.dll Version: 4.5.0.0 ----Module Name: GISTools.dll Path: C:\Basins\bin\Plugins\GISTools.dll Version: 4.5.3012.6832 ----Module Name: MapWinGeoProc.dll Path: C:\Basins\bin\MapWinGeoProc.dll Version: 1.0.0.1 ----Module Name: ICSharpCode.SharpZipLib.dll Path: C:\Basins\bin\Plugins\ICSharpCode.SharpZipLib.dll Version: 0.85.1.271 ----Module Name: mwCSVtoShapefile.dll Path: C:\Basins\bin\Plugins\mwCSVtoShapefile.dll Version: 1.0.0.0 ----Module Name: ShapefileEditor.dll Path: C:\Basins\bin\Plugins\ShapefileEditor.dll Version: 4.5.3034.36086 ----Module Name: mwTaudemBasinsWrapper.dll Path: C:\Basins\bin\Plugins\watershed_delin\mwTaudemBasinsWrapper.dll Version: 1.0.3006.35018 ----Module Name: Interop.TKTAUDEMLib.dll Path: C:\Basins\bin\Interop.TKTAUDEMLib.dll Version: 3.1.0.0 ----Module Name: atcBasinsObsWQ.dll Path: C:\Basins\bin\Plugins\BASINS\atcBasinsObsWQ.dll Version: 3.1.1.0 ----Module Name: atcData.dll Path: C:\Basins\bin\Plugins\BASINS\atcData.dll Version: 3.1.1.0 ----Module Name: atcUtility.dll Path: C:\Basins\bin\Plugins\BASINS\atcUtility.dll Version: 3.1.1.0 ----Module Name: atcCligen.dll Path: C:\Basins\bin\Plugins\BASINS\atcCligen.dll Version: 3.1.1.0 ----Module Name: atcCligenOutput.dll Path: C:\Basins\bin\Plugins\BASINS\atcCligenOutput.dll Version: 3.1.1.0 ----Module Name: atcClimateAssessmentTool.dll Path: C:\Basins\bin\Plugins\BASINS\atcClimateAssessmentTool.dll Version: 3.1.1.0 ----Module Name: atcControls.dll Path: C:\Basins\bin\Plugins\BASINS\atcControls.dll Version: 3.1.1.0 ----Module Name: atcDataTree.dll Path: C:\Basins\bin\Plugins\BASINS\atcDataTree.dll Version: 3.1.1.0 ----Module Name: atcEvents.dll Path: C:\Basins\bin\Plugins\BASINS\atcEvents.dll Version: 3.1.1.0 ----Module Name: atcFrequencyGrid.dll Path: C:\Basins\bin\Plugins\BASINS\atcFrequencyGrid.dll Version: 3.1.1.0 ----Module Name: atcGisUtilities.dll Path: C:\Basins\bin\Plugins\BASINS\atcGisUtilities.dll Version: 3.1.1.0 ----Module Name: atcGraph.dll Path: C:\Basins\bin\Plugins\BASINS\atcGraph.dll Version: 3.1.1.0 ----Module Name: ZedGraph.dll Path: C:\Basins\bin\ZedGraph.dll Version: 5.1.3.0 ----Module Name: atcHspfBinOut.dll Path: C:\Basins\bin\Plugins\BASINS\atcHspfBinOut.dll Version: 3.1.1.0 ----Module Name: atcHspfSupport.dll Path: C:\Basins\bin\Plugins\BASINS\atcHspfSupport.dll Version: 1.0.0.0 ----Module Name: atcLandUse.dll Path: C:\Basins\bin\Plugins\BASINS\atcLandUse.dll Version: 3.1.1.0 ----Module Name: atcList.dll Path: C:\Basins\bin\Plugins\BASINS\atcList.dll Version: 3.1.1.0 ----Module Name: atcLookup.dll Path: C:\Basins\bin\Plugins\BASINS\atcLookup.dll Version: 3.1.1.0 ----Module Name: atcManDelin.dll Path: C:\Basins\bin\Plugins\BASINS\atcManDelin.dll Version: 3.1.1.0 ----Module Name: atcMetCmp.dll Path: C:\Basins\bin\Plugins\BASINS\atcMetCmp.dll Version: 3.1.1.0 ----Module Name: atcModelSegmentation.dll Path: C:\Basins\bin\Plugins\BASINS\atcModelSegmentation.dll Version: 0.0.0.0 ----Module Name: atcModelSetup.dll Path: C:\Basins\bin\Plugins\BASINS\atcModelSetup.dll Version: 3.1.1.0 ----Module Name: atcMwGisUtility.dll Path: C:\Basins\bin\Plugins\BASINS\atcMwGisUtility.dll Version: 3.1.1.0 ----Module Name: atcNOAAHPD.dll Path: C:\Basins\bin\Plugins\BASINS\atcNOAAHPD.dll Version: 3.1.1.0 ----Module Name: atcNOAAISH.dll Path: C:\Basins\bin\Plugins\BASINS\atcNOAAISH.dll Version: 3.1.1.0 ----Module Name: atcPollutantLoading.dll Path: C:\Basins\bin\Plugins\BASINS\atcPollutantLoading.dll Version: 3.1.1.0 ----Module Name: atcProjector.dll Path: C:\Basins\bin\Plugins\BASINS\atcProjector.dll Version: 3.1.1.0 ----Module Name: atcReport.dll Path: C:\Basins\bin\Plugins\BASINS\atcReport.dll Version: 3.1.1.0 ----Module Name: atcSeasonalAttributes.dll Path: C:\Basins\bin\Plugins\BASINS\atcSeasonalAttributes.dll Version: 3.1.1.0 ----Module Name: atcSeasons.dll Path: C:\Basins\bin\Plugins\BASINS\atcSeasons.dll Version: 3.1.1.0 ----Module Name: atcSegmentation.dll Path: C:\Basins\bin\Plugins\BASINS\atcSegmentation.dll Version: 1.0.0.0 ----Module Name: atcSWATDBF.dll Path: C:\Basins\bin\Plugins\BASINS\atcSWATDBF.dll Version: 3.1.1.0 ----Module Name: atcSynopInput.dll Path: C:\Basins\bin\Plugins\BASINS\atcSynopInput.dll Version: 3.1.1.0 ----Module Name: atcSynopticAnalysis.dll Path: C:\Basins\bin\Plugins\BASINS\atcSynopticAnalysis.dll Version: 3.1.1.0 ----Module Name: atcTimeseriesDbf.dll Path: C:\Basins\bin\Plugins\BASINS\atcTimeseriesDbf.dll Version: 0.0.0.0 ----Module Name: atcTimeseriesExcel.dll Path: C:\Basins\bin\Plugins\BASINS\atcTimeseriesExcel.dll Version: 0.0.0.0 ----Module Name: atcTimeseriesMath.dll Path: C:\Basins\bin\Plugins\BASINS\atcTimeseriesMath.dll Version: 3.1.1.0 ----Module Name: atcTimeseriesNdayHighLow.dll Path: C:\Basins\bin\Plugins\BASINS\atcTimeseriesNdayHighLow.dll Version: 3.1.1.0 ----Module Name: atcTimeseriesNOAA.dll Path: C:\Basins\bin\Plugins\BASINS\atcTimeseriesNOAA.dll Version: 3.1.1.0 ----Module Name: atcTimeseriesRDB.dll Path: C:\Basins\bin\Plugins\BASINS\atcTimeseriesRDB.dll Version: 1.0.0.0 ----Module Name: atcTimeseriesStatistics.dll Path: C:\Basins\bin\Plugins\BASINS\atcTimeseriesStatistics.dll Version: 0.0.0.0 ----Module Name: atcTimeseriesSTORET.dll Path: C:\Basins\bin\Plugins\BASINS\atcTimeseriesSTORET.dll Version: 1.0.0.0 ----Module Name: atcUCI.dll Path: C:\Basins\bin\Plugins\BASINS\atcUCI.dll Version: 3.1.1.0 ----Module Name: atcWDM.dll Path: C:\Basins\bin\Plugins\BASINS\atcWDM.dll Version: 3.1.1.0 ----Module Name: System.Web.ni.dll Path: C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\System.Web\67cfb70213562afe2ca9b9 066764af3a\System.Web.ni.dll Version: 2.0.50727.1433 (REDBITS.050727-1400) ----Module Name: shfolder.dll Path: C:\WINDOWS\system32\shfolder.dll Version: 6.00.2900.5512 (xpsp.080413-2105) ----Module Name: hass_ent.dll Path: C:\WINDOWS\system32\hass_ent.dll Version: 13, 0, 21, 0 ----Module Name: lf90wiod.dll Path: C:\WINDOWS\system32\lf90wiod.dll Version: ----Module Name: BASINS.dll Path: C:\Basins\bin\Plugins\BASINS\BASINS.dll Version: 3.1.1.0 ----Module Name: D4EMBasinsDataExtension.dll Path: C:\Basins\bin\Plugins\BASINS\D4EMBasinsDataExtension.dll Version: 1.0.0.0 ----Module Name: D4EMDataManager.dll Path: C:\Basins\bin\Plugins\BASINS\D4EMDataManager.dll Version: 1.0.3138.24152 ----Module Name: D4EMDataDownload.dll Path: C:\Basins\bin\Plugins\BASINS\D4EMDataDownload.dll Version: 1.0.0.0 ----Module Name: D4EMNHDPlusDataExtension.dll Path: C:\Basins\bin\Plugins\BASINS\D4EMNHDPlusDataExtension.dll Version: 1.0.0.0 ----Module Name: D4EMNLCD2001DataExtension.dll Path: C:\Basins\bin\Plugins\BASINS\D4EMNLCD2001DataExtension.dll Version: 1.0.0.0 ----Module Name: D4EMNWISDataExtension.dll Path: C:\Basins\bin\Plugins\BASINS\D4EMNWISDataExtension.dll Version: 1.0.0.0 ----Module Name: D4EMSTORETDataExtension.dll Path: C:\Basins\bin\Plugins\BASINS\D4EMSTORETDataExtension.dll Version: 1.0.0.0 ----Module Name: System.Web.Services.ni.dll Path: C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\System.Web.Services\38991368499e2 109ea4099a0fe29c5a3\System.Web.Services.ni.dll Version: 2.0.50727.1433 (REDBITS.050727-1400) ----Module Name: DFLOWAnalysis.dll Path: C:\Basins\bin\Plugins\BASINS\DFLOWAnalysis.dll Version: 1.1.0.0 ----Module Name: Utilities.dll Path: C:\Basins\bin\Plugins\BASINS\Utilities.dll Version: 1.3.2816.19723 ----Module Name: WebDownload.dll Path: C:\Basins\bin\Plugins\BASINS\WebDownload.dll Version: 1.3.2816.19723 ----Module Name: dciman32.dll Path: C:\WINDOWS\system32\dciman32.dll Version: 5.1.2600.5512 (xpsp.080413-2105) ----Module Name: diasymreader.dll Path: c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\diasymreader.dll Version: 8.0.50727.1433 (REDBITS.050727-1400) ----Module Name: Accessibility.ni.dll Path: C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\Accessibility\c6772fd12a581ad3be4 9e3f2a80b5622\Accessibility.ni.dll Version: 2.0.50727.1433 (REDBITS.050727-1400) ----Module Name: Apphelp.dll Path: C:\WINDOWS\system32\Apphelp.dll Version: 5.1.2600.5512 (xpsp.080413-2105) ----Module Name: Interop.mwTauDem.dll Path: C:\Basins\bin\Plugins\watershed_delin\Interop.mwTauDem.dll Version: 1.0.0.0 ----Module Name: mwTaudem.dll Path: C:\Basins\bin\Plugins\watershed_delin\mwTaudem.dll Version: 3.00.0053 ----Module Name: MSVBVM60.DLL Path: C:\WINDOWS\system32\MSVBVM60.DLL Version: 6.00.9802 ----Module Name: tkTaudem.dll Path: C:\Basins\bin\Plugins\watershed_delin\tkTaudem.dll Version: 2, 0, 0, 28 ----Module Name: fortcalls.dll Path: C:\Basins\bin\Plugins\watershed_delin\fortcalls.dll Version: ----Module Name: DFORRT.dll Path: C:\Basins\bin\Plugins\watershed_delin\DFORRT.dll Version: 6.0 - 575 ----Module Name: mwIdentifier.dll Path: C:\Basins\bin\ApplicationPlugins\mwIdentifier.dll Version: 4.5.3034.36085 ----Module Name: mwLabeler.dll Path: C:\Basins\bin\ApplicationPlugins\mwLabeler.dll Version: 4.5.3034.36085 ----Module Name: TableEditor.dll Path: C:\Basins\bin\ApplicationPlugins\TableEditor.dll Version: 4.5.3012.6832 ----Module Name: mslbui.dll Path: C:\WINDOWS\system32\mslbui.dll Version: 5.1.2600.5512 (xpsp.080413-2105) ----Module Name: stdole.dll Path: C:\WINDOWS\assembly\GAC\stdole\7.0.3300.0__b03f5f7f11d50a3a\stdole.dll Version: 7.00.9466 ----Module Name: proj.dll Path: C:\Basins\bin\proj.dll Version: ----Module Name: dadkeyb.dll Path: C:\Program Files\Dell\QuickSet\dadkeyb.dll Version: ----Module Name: psapi.dll Path: C:\WINDOWS\system32\psapi.dll Version: 5.1.2600.5512 (xpsp.080413-2105) ------------End Debug Info------------------------ ----------------------------------------------------------- X-Message-Number: 19 X-lyris-Id: 173910 Date: Tue, 16 Sep 2008 11:25:00 -0400 From: "Paul Duda" Subject: RE: Problems with BASINS Update Hi Mery, You're right, that is a bug. When you use the 'other shapefile' option, = the current version of the HSPF setup tool expects the 'classification = field' to contain integers, so when you used the description as a the = classification field it caused a problem. =20 We'll fix the tool so the 'classification field' can contain text, but = for now I'll suggest a work-around. Hopefully your land use layer = already has a field containing integer identifiers -- most that I've = seen do, for instance the GIRAS has lucode and description as two fields = in the attribute table. You just need to use that integer identifier. = Then if you want the model to see land use code '11' as 'urban' or = whatever within the HSPF model, you can set up a classification file, a = dbf containing those relationships, just like the file 'giras.dbf' is = used for the GIRAS land use data with BASINS. Or you can change the = descriptions in the PERLND GEN-INFO table in HSPF -- that would give you = the same result. Let me know if I need to go through this in more detail. Paul -----Original Message----- From: Mery Apple [mailto:mery@hawaii.edu] Sent: Monday, September 15, 2008 2:15 PM To: Private list for BASINS users Subject: RE:[basinsinfo] Problems with BASINS Update Paul, Thanks for the response. Here is the error message. My landuse is a = shapefile. I specified other shapefile and selected my file in the = landuse tab with the classification feild as discription (i.e. = agriculture, urban, forest, etc.) Let me know what you suggest I try. Thanks,=20 Mery Apple BASINS 4 4.5.3048 (5/6/2008) System.InvalidCastException: Conversion from string "Agricultural Land" = to type 'Integer' is not valid. ---> System.FormatException: Input = string was not in a correct format. at = Microsoft.VisualBasic.CompilerServices.Conversions.ParseDouble(String = Value, NumberFormatInfo NumberFormat) at = Microsoft.VisualBasic.CompilerServices.Conversions.ToInteger(String = Value) --- End of inner exception stack trace --- at = Microsoft.VisualBasic.CompilerServices.Conversions.ToInteger(String = Value) at = Microsoft.VisualBasic.CompilerServices.Conversions.ToInteger(Object = Value) at atcModelSetup.frmModelSetup.CreateLanduses(atcCollection = aSubbasinsSlopes, Collection aLucodes, Collection aSubids, Collection = aAreas, Reaches aReaches) at atcModelSetup.frmModelSetup.SetupHSPF(String aOutputPath, String = aBaseOutputName) at atcModelSetup.frmModelSetup.cmdOK_Click(Object sender, EventArgs = e) at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnClick(EventArgs e) at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons = button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ButtonBase.WndProc(Message& m) at System.Windows.Forms.Button.WndProc(Message& m) at = System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& = m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, = IntPtr wparam, IntPtr lparam) MapWinUtility (debug reporter) Assmebly Version: 2.0.1433.50727 Operating System: Win32NT Service Pack: Service Pack 3 Major Version: 5 Minor Version: 1 Revision: 3 Build: 2600 ------------------------------------------------- Logical Drives: C:\ D:\=20 System Directory: C:\WINDOWS\system32 Current Directory: C:\Basins\bin Command Line: "C:\Basins\bin\MapWindow.exe"=20 Command Line Args: C:\Basins\bin\MapWindow.exe=20 ------------Environment Variables----------------- Path =3D=3D = C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program = Files\ATI Technologies\ATI.ACE\;C:\Program Files\Common Files\Roxio = Shared\DLLShared\;C:\Program Files\Common Files\Roxio = Shared\DLLShared\;C:\Program Files\Common Files\Roxio = Shared\9.0\DLLShared\;c:\matlab_sv13\bin\win32;C:\Basins\models\HSPEXP\hs= pexp2.4\bin;C:\Program Files\QuickTime\QTSystem\;C:\BMDPNS2\DYNAMIC TEMP =3D=3D C:\DOCUME~1\mery\LOCALS~1\Temp SESSIONNAME =3D=3D Console PATHEXT =3D=3D .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH USERDOMAIN =3D=3D APPLE PROCESSOR_ARCHITECTURE =3D=3D x86 SystemDrive =3D=3D C: RoxioCentral =3D=3D C:\Program Files\Common Files\Roxio Shared\9.0\Roxio = Central33\ APPDATA =3D=3D C:\Documents and Settings\mery\Application Data windir =3D=3D C:\WINDOWS TMP =3D=3D C:\DOCUME~1\mery\LOCALS~1\Temp USERPROFILE =3D=3D C:\Documents and Settings\mery ProgramFiles =3D=3D C:\Program Files FP_NO_HOST_CHECK =3D=3D NO HOMEPATH =3D=3D \Documents and Settings\mery COMPUTERNAME =3D=3D APPLE CLASSPATH =3D=3D .;C:\Program Files\Java\jre1.5.0_06\lib\ext\QTJava.zip USERNAME =3D=3D mery NUMBER_OF_PROCESSORS =3D=3D 2 PROCESSOR_IDENTIFIER =3D=3D x86 Family 15 Model 104 Stepping 1, = AuthenticAMD ComSpec =3D=3D C:\WINDOWS\system32\cmd.exe PYTHONPATH =3D=3D C:\Program Files\ArcGIS\bin DNEWS =3D=3D C:\BMDPNS2\DYNAMIC LOGONSERVER =3D=3D \\APPLE CommonProgramFiles =3D=3D C:\Program Files\Common Files ARCGISHOME =3D=3D C:\Program Files\ArcGIS\ SystemRoot =3D=3D C:\WINDOWS PROCESSOR_LEVEL =3D=3D 15 PROCESSOR_REVISION =3D=3D 6801 PROJ_LIB =3D=3D C:\Basins\bin\PROJ_NAD QTJAVA =3D=3D C:\Program Files\Java\jre1.5.0_06\lib\ext\QTJava.zip ALLUSERSPROFILE =3D=3D C:\Documents and Settings\All Users OS =3D=3D Windows_NT HOMEDRIVE =3D=3D C: ------------Performance Info (Bytes)-------------- Private Memory: 631033856 tVirtual Memory: 873426944 Total CPU time: 00:00:50.1406250 Total User Mode CPU time: 00:00:20.8125000 ------------Module Info:-------------------------- ----Module Name: MapWindow.exe Path: C:\Basins\bin\MapWindow.exe Version: 4.5.3048.25994 ----Module Name: ntdll.dll Path: C:\WINDOWS\system32\ntdll.dll Version: 5.1.2600.5512 (xpsp.080413-2111) ----Module Name: mscoree.dll Path: C:\WINDOWS\system32\mscoree.dll Version: 2.0.50727.1433 (REDBITS.050727-1400) ----Module Name: KERNEL32.dll Path: C:\WINDOWS\system32\KERNEL32.dll Version: 5.1.2600.5512 (xpsp.080413-2111) ----Module Name: ADVAPI32.dll Path: C:\WINDOWS\system32\ADVAPI32.dll Version: 5.1.2600.5512 (xpsp.080413-2113) ----Module Name: RPCRT4.dll Path: C:\WINDOWS\system32\RPCRT4.dll Version: 5.1.2600.5512 (xpsp.080413-2108) ----Module Name: Secur32.dll Path: C:\WINDOWS\system32\Secur32.dll Version: 5.1.2600.5512 (xpsp.080413-2113) ----Module Name: SHLWAPI.dll Path: C:\WINDOWS\system32\SHLWAPI.dll Version: 6.00.2900.5512 (xpsp.080413-2105) ----Module Name: GDI32.dll Path: C:\WINDOWS\system32\GDI32.dll Version: 5.1.2600.5512 (xpsp.080413-2105) ----Module Name: USER32.dll Path: C:\WINDOWS\system32\USER32.dll Version: 5.1.2600.5512 (xpsp.080413-2105) ----Module Name: msvcrt.dll Path: C:\WINDOWS\system32\msvcrt.dll Version: 7.0.2600.5512 (xpsp.080413-2111) ----Module Name: IMM32.DLL Path: C:\WINDOWS\system32\IMM32.DLL Version: 5.1.2600.5512 (xpsp.080413-2105) ----Module Name: mscorwks.dll Path: c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\mscorwks.dll Version: 2.0.50727.1433 (REDBITS.050727-1400) ----Module Name: MSVCR80.dll Path: = C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.1433_= x-ww_5cf844d2\MSVCR80.dll Version: 8.00.50727.1433 ----Module Name: shell32.dll Path: C:\WINDOWS\system32\shell32.dll Version: 6.00.2900.5512 (xpsp.080413-2105) ----Module Name: comctl32.dll Path: = C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_= 6.0.2600.5512_x-ww_35d4ce83\comctl32.dll Version: 6.0 (xpsp.080413-2105) ----Module Name: comctl32.dll Path: C:\WINDOWS\system32\comctl32.dll Version: 5.82 (xpsp.080413-2105) ----Module Name: mscorlib.ni.dll Path: = C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\mscorlib\32e6f703c114f3a97= 1cbe706586e3655\mscorlib.ni.dll Version: 2.0.50727.1433 (REDBITS.050727-1400) ----Module Name: ole32.dll Path: C:\WINDOWS\system32\ole32.dll Version: 5.1.2600.5512 (xpsp.080413-2108) ----Module Name: MSCTF.dll Path: C:\WINDOWS\system32\MSCTF.dll Version: 5.1.2600.5512 (xpsp.080413-2105) ----Module Name: QOEHook.dll Path: C:\Program Files\CA\CA Internet Security Suite\CA = Anti-Spam\QSP-5.1.18.0\QOEHook.dll Version: 5.1.18.0 ----Module Name: mscorjit.dll Path: c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\mscorjit.dll Version: 2.0.50727.1433 (REDBITS.050727-1400) ----Module Name: xpsp2res.dll Path: C:\WINDOWS\system32\xpsp2res.dll Version: 5.1.2600.5512 (xpsp.080413-2113) ----Module Name: MapWinInterfaces.dll Path: C:\Basins\bin\MapWinInterfaces.dll Version: 4.3.3034.36587 ----Module Name: System.ni.dll Path: = C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\System\ba0e3a22211ba7343e0= 116b051f2965a\System.ni.dll Version: 2.0.50727.1433 (REDBITS.050727-1400) ----Module Name: System.Drawing.ni.dll Path: = C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\System.Drawing\0e83aac37b2= 623f1a24c70979f31dd56\System.Drawing.ni.dll Version: 2.0.50727.1433 (REDBITS.050727-1400) ----Module Name: System.Windows.Forms.ni.dll Path: = C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\System.Windows.Forms\3d8c7= 9c45aa674e43f075e2e66b8caf5\System.Windows.Forms.ni.dll Version: 2.0.50727.1433 (REDBITS.050727-1400) ----Module Name: System.Xml.ni.dll Path: = C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\System.Xml\c98cb65a79cfccb= 44ea727ebe4593ede\System.Xml.ni.dll Version: 2.0.50727.1433 (REDBITS.050727-1400) ----Module Name: Microsoft.VisualBasic.ni.dll Path: = C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\Microsoft.VisualBas#\923bd= 55258380eae77353d36a5a1b08f\Microsoft.VisualBasic.ni.dll Version: 8.0.50727.1433 (REDBITS.050727-1400) ----Module Name: version.dll Path: C:\WINDOWS\system32\version.dll Version: 5.1.2600.5512 (xpsp.080413-2105) ----Module Name: IntellisenseEditor.dll Path: C:\Basins\bin\IntellisenseEditor.dll Version: 1.0.2743.27782 ----Module Name: msctfime.ime Path: C:\WINDOWS\system32\msctfime.ime Version: 5.1.2600.5512 (xpsp.080413-2105) ----Module Name: gdiplus.dll Path: = C:\WINDOWS\WinSxS\x86_Microsoft.Windows.GdiPlus_6595b64144ccf1df_1.0.2600= .5581_x-ww_dfbc4fc4\gdiplus.dll Version: 5.1.3102.5581 (xpsp_sp3_qfe.080415-1416) ----Module Name: rsaenh.dll Path: C:\WINDOWS\system32\rsaenh.dll Version: 5.1.2600.5507 (xpsp.080318-1711) ----Module Name: ICSharpCode.TextEditor.dll Path: C:\Basins\bin\ICSharpCode.TextEditor.dll Version: 2.1.0.2429 ----Module Name: ICSharpCode.SharpDevelop.Dom.dll Path: C:\Basins\bin\ICSharpCode.SharpDevelop.Dom.dll Version: 2.1.0.2429 ----Module Name: oleaut32.dll Path: C:\WINDOWS\system32\oleaut32.dll Version: 5.1.2600.5512 ----Module Name: log4net.dll Path: C:\Basins\bin\log4net.dll Version: 1.2.10.0 ----Module Name: System.Configuration.ni.dll Path: = C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\System.Configuration\eee9b= 48577689e92db5a7b5c5de98d9b\System.Configuration.ni.dll Version: 2.0.50727.1433 (REDBITS.050727-1400) ----Module Name: MapWindow.resources.dll Path: C:\Basins\bin\en\MapWindow.resources.dll Version: 4.4.2801.28626 ----Module Name: MapWinUtility.dll Path: C:\Basins\bin\MapWinUtility.dll Version: 1.0.3096.24764 ----Module Name: uxtheme.dll Path: C:\WINDOWS\system32\uxtheme.dll Version: 6.00.2900.5512 (xpsp.080413-2105) ----Module Name: AxInterop.MapWinGIS.dll Path: C:\Basins\bin\AxInterop.MapWinGIS.dll Version: 3.0.0.0 ----Module Name: WeifenLuo.WinFormsUI.Docking.dll Path: C:\Basins\bin\WeifenLuo.WinFormsUI.Docking.dll Version: 2.2.0.0 ----Module Name: Interop.MapWinGIS.dll Path: C:\Basins\bin\Interop.MapWinGIS.dll Version: 3.0.0.0 ----Module Name: CLBCATQ.DLL Path: C:\WINDOWS\system32\CLBCATQ.DLL Version: 2001.12.4414.700 ----Module Name: COMRes.dll Path: C:\WINDOWS\system32\COMRes.dll Version: 2001.12.4414.700 ----Module Name: MAPWIN~1.OCX Path: C:\PROGRA~1\COMMON~1\MAPWIN~1\MAPWIN~1.OCX Version: 4.6.0.0 ----Module Name: ODBC32.dll Path: C:\WINDOWS\system32\ODBC32.dll Version: 3.525.1132.0 (xpsp.080413-0852) ----Module Name: comdlg32.dll Path: C:\WINDOWS\system32\comdlg32.dll Version: 6.00.2900.5512 (xpsp.080413-2105) ----Module Name: MFC71.DLL Path: C:\WINDOWS\system32\MFC71.DLL Version: 7.10.3077.0 ----Module Name: MSVCR71.dll Path: C:\WINDOWS\system32\MSVCR71.dll Version: 7.10.3052.4 ----Module Name: MSIMG32.dll Path: C:\WINDOWS\system32\MSIMG32.dll Version: 5.1.2600.5512 (xpsp.080413-2105) ----Module Name: MSVCP71.dll Path: C:\WINDOWS\system32\MSVCP71.dll Version: 7.10.3077.0 ----Module Name: WS2_32.dll Path: C:\WINDOWS\system32\WS2_32.dll Version: 5.1.2600.5512 (xpsp.080413-0852) ----Module Name: WS2HELP.dll Path: C:\WINDOWS\system32\WS2HELP.dll Version: 5.1.2600.5512 (xpsp.080413-0852) ----Module Name: odbcint.dll Path: C:\WINDOWS\system32\odbcint.dll Version: 3.525.1132.0 (xpsp.080413-0852) ----Module Name: MFC71ENU.DLL Path: C:\WINDOWS\system32\MFC71ENU.DLL Version: 7.10.3077.0 ----Module Name: SXS.DLL Path: C:\WINDOWS\system32\SXS.DLL Version: 5.1.2600.5512 (xpsp.080413-2111) ----Module Name: RichEd20.DLL Path: C:\WINDOWS\system32\RichEd20.DLL Version: 5.30.23.1230 ----Module Name: ArchiveTool.dll Path: C:\Basins\bin\Plugins\ArchiveTool.dll Version: 4.5.0.0 ----Module Name: GISTools.dll Path: C:\Basins\bin\Plugins\GISTools.dll Version: 4.5.3012.6832 ----Module Name: MapWinGeoProc.dll Path: C:\Basins\bin\MapWinGeoProc.dll Version: 1.0.0.1 ----Module Name: ICSharpCode.SharpZipLib.dll Path: C:\Basins\bin\Plugins\ICSharpCode.SharpZipLib.dll Version: 0.85.1.271 ----Module Name: mwCSVtoShapefile.dll Path: C:\Basins\bin\Plugins\mwCSVtoShapefile.dll Version: 1.0.0.0 ----Module Name: ShapefileEditor.dll Path: C:\Basins\bin\Plugins\ShapefileEditor.dll Version: 4.5.3034.36086 ----Module Name: mwTaudemBasinsWrapper.dll Path: = C:\Basins\bin\Plugins\watershed_delin\mwTaudemBasinsWrapper.dll Version: 1.0.3006.35018 ----Module Name: Interop.TKTAUDEMLib.dll Path: C:\Basins\bin\Interop.TKTAUDEMLib.dll Version: 3.1.0.0 ----Module Name: atcBasinsObsWQ.dll Path: C:\Basins\bin\Plugins\BASINS\atcBasinsObsWQ.dll Version: 3.1.1.0 ----Module Name: atcData.dll Path: C:\Basins\bin\Plugins\BASINS\atcData.dll Version: 3.1.1.0 ----Module Name: atcUtility.dll Path: C:\Basins\bin\Plugins\BASINS\atcUtility.dll Version: 3.1.1.0 ----Module Name: atcCligen.dll Path: C:\Basins\bin\Plugins\BASINS\atcCligen.dll Version: 3.1.1.0 ----Module Name: atcCligenOutput.dll Path: C:\Basins\bin\Plugins\BASINS\atcCligenOutput.dll Version: 3.1.1.0 ----Module Name: atcClimateAssessmentTool.dll Path: C:\Basins\bin\Plugins\BASINS\atcClimateAssessmentTool.dll Version: 3.1.1.0 ----Module Name: atcControls.dll Path: C:\Basins\bin\Plugins\BASINS\atcControls.dll Version: 3.1.1.0 ----Module Name: atcDataTree.dll Path: C:\Basins\bin\Plugins\BASINS\atcDataTree.dll Version: 3.1.1.0 ----Module Name: atcEvents.dll Path: C:\Basins\bin\Plugins\BASINS\atcEvents.dll Version: 3.1.1.0 ----Module Name: atcFrequencyGrid.dll Path: C:\Basins\bin\Plugins\BASINS\atcFrequencyGrid.dll Version: 3.1.1.0 ----Module Name: atcGisUtilities.dll Path: C:\Basins\bin\Plugins\BASINS\atcGisUtilities.dll Version: 3.1.1.0 ----Module Name: atcGraph.dll Path: C:\Basins\bin\Plugins\BASINS\atcGraph.dll Version: 3.1.1.0 ----Module Name: ZedGraph.dll Path: C:\Basins\bin\ZedGraph.dll Version: 5.1.3.0 ----Module Name: atcHspfBinOut.dll Path: C:\Basins\bin\Plugins\BASINS\atcHspfBinOut.dll Version: 3.1.1.0 ----Module Name: atcHspfSupport.dll Path: C:\Basins\bin\Plugins\BASINS\atcHspfSupport.dll Version: 1.0.0.0 ----Module Name: atcLandUse.dll Path: C:\Basins\bin\Plugins\BASINS\atcLandUse.dll Version: 3.1.1.0 ----Module Name: atcList.dll Path: C:\Basins\bin\Plugins\BASINS\atcList.dll Version: 3.1.1.0 ----Module Name: atcLookup.dll Path: C:\Basins\bin\Plugins\BASINS\atcLookup.dll Version: 3.1.1.0 ----Module Name: atcManDelin.dll Path: C:\Basins\bin\Plugins\BASINS\atcManDelin.dll Version: 3.1.1.0 ----Module Name: atcMetCmp.dll Path: C:\Basins\bin\Plugins\BASINS\atcMetCmp.dll Version: 3.1.1.0 ----Module Name: atcModelSegmentation.dll Path: C:\Basins\bin\Plugins\BASINS\atcModelSegmentation.dll Version: 0.0.0.0 ----Module Name: atcModelSetup.dll Path: C:\Basins\bin\Plugins\BASINS\atcModelSetup.dll Version: 3.1.1.0 ----Module Name: atcMwGisUtility.dll Path: C:\Basins\bin\Plugins\BASINS\atcMwGisUtility.dll Version: 3.1.1.0 ----Module Name: atcNOAAHPD.dll Path: C:\Basins\bin\Plugins\BASINS\atcNOAAHPD.dll Version: 3.1.1.0 ----Module Name: atcNOAAISH.dll Path: C:\Basins\bin\Plugins\BASINS\atcNOAAISH.dll Version: 3.1.1.0 ----Module Name: atcPollutantLoading.dll Path: C:\Basins\bin\Plugins\BASINS\atcPollutantLoading.dll Version: 3.1.1.0 ----Module Name: atcProjector.dll Path: C:\Basins\bin\Plugins\BASINS\atcProjector.dll Version: 3.1.1.0 ----Module Name: atcReport.dll Path: C:\Basins\bin\Plugins\BASINS\atcReport.dll Version: 3.1.1.0 ----Module Name: atcSeasonalAttributes.dll Path: C:\Basins\bin\Plugins\BASINS\atcSeasonalAttributes.dll Version: 3.1.1.0 ----Module Name: atcSeasons.dll Path: C:\Basins\bin\Plugins\BASINS\atcSeasons.dll Version: 3.1.1.0 ----Module Name: atcSegmentation.dll Path: C:\Basins\bin\Plugins\BASINS\atcSegmentation.dll Version: 1.0.0.0 ----Module Name: atcSWATDBF.dll Path: C:\Basins\bin\Plugins\BASINS\atcSWATDBF.dll Version: 3.1.1.0 ----Module Name: atcSynopInput.dll Path: C:\Basins\bin\Plugins\BASINS\atcSynopInput.dll Version: 3.1.1.0 ----Module Name: atcSynopticAnalysis.dll Path: C:\Basins\bin\Plugins\BASINS\atcSynopticAnalysis.dll Version: 3.1.1.0 ----Module Name: atcTimeseriesDbf.dll Path: C:\Basins\bin\Plugins\BASINS\atcTimeseriesDbf.dll Version: 0.0.0.0 ----Module Name: atcTimeseriesExcel.dll Path: C:\Basins\bin\Plugins\BASINS\atcTimeseriesExcel.dll Version: 0.0.0.0 ----Module Name: atcTimeseriesMath.dll Path: C:\Basins\bin\Plugins\BASINS\atcTimeseriesMath.dll Version: 3.1.1.0 ----Module Name: atcTimeseriesNdayHighLow.dll Path: C:\Basins\bin\Plugins\BASINS\atcTimeseriesNdayHighLow.dll Version: 3.1.1.0 ----Module Name: atcTimeseriesNOAA.dll Path: C:\Basins\bin\Plugins\BASINS\atcTimeseriesNOAA.dll Version: 3.1.1.0 ----Module Name: atcTimeseriesRDB.dll Path: C:\Basins\bin\Plugins\BASINS\atcTimeseriesRDB.dll Version: 1.0.0.0 ----Module Name: atcTimeseriesStatistics.dll Path: C:\Basins\bin\Plugins\BASINS\atcTimeseriesStatistics.dll Version: 0.0.0.0 ----Module Name: atcTimeseriesSTORET.dll Path: C:\Basins\bin\Plugins\BASINS\atcTimeseriesSTORET.dll Version: 1.0.0.0 ----Module Name: atcUCI.dll Path: C:\Basins\bin\Plugins\BASINS\atcUCI.dll Version: 3.1.1.0 ----Module Name: atcWDM.dll Path: C:\Basins\bin\Plugins\BASINS\atcWDM.dll Version: 3.1.1.0 ----Module Name: System.Web.ni.dll Path: = C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\System.Web\67cfb70213562af= e2ca9b9066764af3a\System.Web.ni.dll Version: 2.0.50727.1433 (REDBITS.050727-1400) ----Module Name: shfolder.dll Path: C:\WINDOWS\system32\shfolder.dll Version: 6.00.2900.5512 (xpsp.080413-2105) ----Module Name: hass_ent.dll Path: C:\WINDOWS\system32\hass_ent.dll Version: 13, 0, 21, 0 ----Module Name: lf90wiod.dll Path: C:\WINDOWS\system32\lf90wiod.dll Version: ----Module Name: BASINS.dll Path: C:\Basins\bin\Plugins\BASINS\BASINS.dll Version: 3.1.1.0 ----Module Name: D4EMBasinsDataExtension.dll Path: C:\Basins\bin\Plugins\BASINS\D4EMBasinsDataExtension.dll Version: 1.0.0.0 ----Module Name: D4EMDataManager.dll Path: C:\Basins\bin\Plugins\BASINS\D4EMDataManager.dll Version: 1.0.3138.24152 ----Module Name: D4EMDataDownload.dll Path: C:\Basins\bin\Plugins\BASINS\D4EMDataDownload.dll Version: 1.0.0.0 ----Module Name: D4EMNHDPlusDataExtension.dll Path: C:\Basins\bin\Plugins\BASINS\D4EMNHDPlusDataExtension.dll Version: 1.0.0.0 ----Module Name: D4EMNLCD2001DataExtension.dll Path: C:\Basins\bin\Plugins\BASINS\D4EMNLCD2001DataExtension.dll Version: 1.0.0.0 ----Module Name: D4EMNWISDataExtension.dll Path: C:\Basins\bin\Plugins\BASINS\D4EMNWISDataExtension.dll Version: 1.0.0.0 ----Module Name: D4EMSTORETDataExtension.dll Path: C:\Basins\bin\Plugins\BASINS\D4EMSTORETDataExtension.dll Version: 1.0.0.0 ----Module Name: System.Web.Services.ni.dll Path: = C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\System.Web.Services\389913= 68499e2109ea4099a0fe29c5a3\System.Web.Services.ni.dll Version: 2.0.50727.1433 (REDBITS.050727-1400) ----Module Name: DFLOWAnalysis.dll Path: C:\Basins\bin\Plugins\BASINS\DFLOWAnalysis.dll Version: 1.1.0.0 ----Module Name: Utilities.dll Path: C:\Basins\bin\Plugins\BASINS\Utilities.dll Version: 1.3.2816.19723 ----Module Name: WebDownload.dll Path: C:\Basins\bin\Plugins\BASINS\WebDownload.dll Version: 1.3.2816.19723 ----Module Name: dciman32.dll Path: C:\WINDOWS\system32\dciman32.dll Version: 5.1.2600.5512 (xpsp.080413-2105) ----Module Name: diasymreader.dll Path: = c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\diasymreader.dll Version: 8.0.50727.1433 (REDBITS.050727-1400) ----Module Name: Accessibility.ni.dll Path: = C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\Accessibility\c6772fd12a58= 1ad3be49e3f2a80b5622\Accessibility.ni.dll Version: 2.0.50727.1433 (REDBITS.050727-1400) ----Module Name: Apphelp.dll Path: C:\WINDOWS\system32\Apphelp.dll Version: 5.1.2600.5512 (xpsp.080413-2105) ----Module Name: Interop.mwTauDem.dll Path: C:\Basins\bin\Plugins\watershed_delin\Interop.mwTauDem.dll Version: 1.0.0.0 ----Module Name: mwTaudem.dll Path: C:\Basins\bin\Plugins\watershed_delin\mwTaudem.dll Version: 3.00.0053 ----Module Name: MSVBVM60.DLL Path: C:\WINDOWS\system32\MSVBVM60.DLL Version: 6.00.9802 ----Module Name: tkTaudem.dll Path: C:\Basins\bin\Plugins\watershed_delin\tkTaudem.dll Version: 2, 0, 0, 28 ----Module Name: fortcalls.dll Path: C:\Basins\bin\Plugins\watershed_delin\fortcalls.dll Version: ----Module Name: DFORRT.dll Path: C:\Basins\bin\Plugins\watershed_delin\DFORRT.dll Version: 6.0 - 575 ----Module Name: mwIdentifier.dll Path: C:\Basins\bin\ApplicationPlugins\mwIdentifier.dll Version: 4.5.3034.36085 ----Module Name: mwLabeler.dll Path: C:\Basins\bin\ApplicationPlugins\mwLabeler.dll Version: 4.5.3034.36085 ----Module Name: TableEditor.dll Path: C:\Basins\bin\ApplicationPlugins\TableEditor.dll Version: 4.5.3012.6832 ----Module Name: mslbui.dll Path: C:\WINDOWS\system32\mslbui.dll Version: 5.1.2600.5512 (xpsp.080413-2105) ----Module Name: stdole.dll Path: = C:\WINDOWS\assembly\GAC\stdole\7.0.3300.0__b03f5f7f11d50a3a\stdole.dll Version: 7.00.9466 ----Module Name: proj.dll Path: C:\Basins\bin\proj.dll Version: ----Module Name: dadkeyb.dll Path: C:\Program Files\Dell\QuickSet\dadkeyb.dll Version: ----Module Name: psapi.dll Path: C:\WINDOWS\system32\psapi.dll Version: 5.1.2600.5512 (xpsp.080413-2105) ------------End Debug Info------------------------ ------------------------------------------ You are currently subscribed to the basinsinfo listserver.=20 To unsubscribe, send the words unsubscribe basinsinfo to = lyris@lists.epa.gov OR: Use the listserver's web interface at = https://lists.epa.gov/cgi-bin/lyris.pl to manage your=20 subscription. OR Contact the basinsinfo listserver owner at = basinsinfo-Owner@lists.epa.gov ------------------------------------------ -- If this email is spam, report it here: http://www.onlymyemail.com/view/?action=3DreportSpam&Id=3DMTcyMzc6NzQ2MjU= xMTUzOnBiZHVkYUBhcXVhdGVycmEuY29t ----------------------------------------------------------- X-Message-Number: 20 X-lyris-Id: 173946 Date: Tue, 16 Sep 2008 18:54:40 -0000 From: "Mery Apple" Subject: RE: Problems with BASINS Update Thanks Paul! That worked. ----------------------------------------------------------- X-Message-Number: 21 X-lyris-Id: 173958 Date: Wed, 17 Sep 2008 06:38:05 -0700 (PDT) From: Lauren Felker Subject: Re: Basins to HSPF error --0-1318588760-1221658685=:5416 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Paul,=0A=A0=0ARunning the manual delineator produces 12 instances (among 26= reaches) of multiple segments per subbasin, in some cases there are four s= eparate segments per reach. Also, the stream segments are discontinuous in= =A0several places, especially at the intersection of several reaches. =0A= =A0=0AWhen I first used the manual delineator it was creating a very discon= tinuous stream file, with stream=A0segments completely=A0absent in reaches = where they shouldn't have been absent. To=A0fix this problem=A0I went throu= gh the NHD file and changed the values in the "Level" field to 1 for the se= gments that needed to be made a part of the stream file. That fixed my issu= e so that each reach had a segment like it was supposed to. Could that be c= ontributing to the issue that I have now? =0A=A0=0ALauren=0A=0A=0A=0A----- = Original Message ----=0AFrom: Paul Duda =0ATo: Privat= e list for BASINS users =0ASent: Monday, Septembe= r 15, 2008 10:12:33 AM=0ASubject: RE: [basinsinfo] Basins to HSPF error=0A= =0A=0AI think this problem must be related to the attributes of the streams= shapefile that you are using.=A0 The HSPF setup tool requires that there b= e one and only one stream segment per subbasin, and each stream segment mus= t have a unique id in the shapefile attribute table.=A0 This rule is enforc= ed by the BASINS delineation tools, but if you are using your own imported = delineations I can see how it might be violated.=A0 =0A=A0=0AYou might need= to run the manual delineator to define the stream network and calculate th= e stream attributes before starting the model setup tool.=0A=A0=0APaul Duda= =0AAQUA TERRA Consultants=0A-----Original Message-----=0AFrom: Lauren Felke= r [mailto:emerson924@yahoo.com]=0ASent: Monday, September 15, 2008 9:36 AM= =0ATo: Private list for BASINS users=0ASubject: [basinsinfo] Basins to HSPF= error=0A=0A=0AHello all. =0A=0AHere is the content of the error I'm gettin= g when I try to create an HSPF project with the latest version of Basins: = =0A=0ABASINS 4 4.5.3048 (5/6/2008)=0ASystem.ArgumentException: An item with= the same key has already been added.=0A=A0=A0 at System.ThrowHelper.ThrowA= rgumentException(ExceptionResource resource)=0A=A0=A0 at System.Collections= .Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)=0A=A0=A0 = at System.Collections.ObjectModel.KeyedCollection`2.AddKey(TKey key, TItem = item)=0A=A0=A0 at System.Collections.ObjectModel.KeyedCollection`2.InsertIt= em(Int32 index, TItem item)=0A=A0=A0 at System.Collections.ObjectModel.Coll= ection`1.Add(T item)=0A=A0=A0 at atcModelSetup.frmModelSetup.CreateReachSeg= ments(atcCollection aSubbasinsSelected, atcCollection aSubbasinsModelSegmen= tIds)=0A=A0=A0 at atcModelSetup.frmModelSetup.SetupHSPF(String aOutputPath,= String aBaseOutputName)=0A=A0=A0 at atcModelSetup.frmModelSetup.cmdOK_Clic= k(Object sender, EventArgs e)=0A=A0=A0 at System.Windows.Forms.Control.OnCl= ick(EventArgs e)=0A=A0=A0 at System.Windows.Forms.Button.OnClick(EventArgs = e)=0A=A0=A0 at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)= =0A=A0=A0 at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButton= s button, Int32 clicks)=0A=A0=A0 at System.Windows.Forms.Control.WndProc(Me= ssage& m)=0A=A0=A0 at System.Windows.Forms.ButtonBase.WndProc(Message& m)= =0A=A0=A0 at System.Windows.Forms.Button.WndProc(Message& m)=0A=A0=A0 at Sy= stem.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)=0A=A0= =A0 at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)= =0A=A0=A0 at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 = msg, IntPtr wparam, IntPtr lparam)=0AMapWinUtility (debug reporter) Assmebl= y Version: 2.0.42.50727=0AOperating System: Win32NT=0AService Pack: Service= Pack 3, v.3264=0AMajor Version:=A05=0AMinor Version:=A01=0ARevision:=A0=A0= 3=0ABuild:=A0=A02600=0A=0ACan anyone give me any insight on this issue?=0A= =0AThanks!=0ALauren=0A=0A=0A=0A------------------------------------------= =0AYou are currently subscribed to the basinsinfo listserver. =0A=0ATo unsu= bscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov=0AOR:= =0AUse the listserver's web interface at https://lists.epa.gov/cgi-bin/lyri= s.pl to manage your =0Asubscription.=0AOR=0AContact the basinsinfo listserv= er owner at basinsinfo-Owner@lists.epa.gov=0A------------------------------= ------------=0A________________________________=0AIf this email is spam, re= port it here:=0Ahttp://www.OnlyMyEmail.com/ReportSpam =0A=0A---------------= ---------------------------=0AYou are currently subscribed to the basinsinf= o listserver. =0A=0ATo unsubscribe, send the words unsubscribe basinsinfo t= o lyris@lists.epa.gov=0AOR:=0AUse the listserver's web interface at https:/= /lists.epa.gov/cgi-bin/lyris.pl to manage your =0Asubscription.=0AOR=0ACont= act the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov=0A---= ---------------------------------------=0A=0A=0A --0-1318588760-1221658685=:5416 Content-Type: text/html; charset=us-ascii

Paul,

 

Running the manual delineator produces 12 instances (among 26 reaches) of multiple segments per subbasin, in some cases there are four separate segments per reach. Also, the stream segments are discontinuous in several places, especially at the intersection of several reaches.

 

When I first used the manual delineator it was creating a very discontinuous stream file, with stream segments completely absent in reaches where they shouldn't have been absent. To fix this problem I went through the NHD file and changed the values in the "Level" field to 1 for the segments that needed to be made a part of the stream file. That fixed my issue so that each reach had a segment like it was supposed to. Could that be contributing to the issue that I have now?

 

Lauren



----- Original Message ----
From: Paul Duda <pbduda@aquaterra.com>
To: Private list for BASINS users <basinsinfo@lists.epa.gov>
Sent: Monday, September 15, 2008 10:12:33 AM
Subject: RE: [basinsinfo] Basins to HSPF error

I think this problem must be related to the attributes of the streams shapefile that you are using.  The HSPF setup tool requires that there be one and only one stream segment per subbasin, and each stream segment must have a unique id in the shapefile attribute table.  This rule is enforced by the BASINS delineation tools, but if you are using your own imported delineations I can see how it might be violated. 
 
You might need to run the manual delineator to define the stream network and calculate the stream attributes before starting the model setup tool.
 
Paul Duda
AQUA TERRA Consultants
-----Original Message-----
From: Lauren Felker [mailto:emerson924@yahoo.com]
Sent: Monday, September 15, 2008 9:36 AM
To: Private list for BASINS users
Subject: [basinsinfo] Basins to HSPF error

Hello all.
 
Here is the content of the error I'm getting when I try to create an HSPF project with the latest version of Basins:
 
BASINS 4 4.5.3048 (5/6/2008)
System.ArgumentException: An item with the same key has already been added.
   at System.ThrowHelper.ThrowArgumentException(ExceptionResource resource)
   at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
   at System.Collections.ObjectModel.KeyedCollection`2.AddKey(TKey key, TItem item)
   at System.Collections.ObjectModel.KeyedCollection`2.InsertItem(Int32 index, TItem item)
   at System.Collections.ObjectModel.Collection`1.Add(T item)
   at atcModelSetup.frmModelSetup.CreateReachSegments(atcCollection aSubbasinsSelected, atcCollection aSubbasinsModelSegmentIds)
   at atcModelSetup.frmModelSetup.SetupHSPF(String aOutputPath, String aBaseOutputName)
   at atcModelSetup.frmModelSetup.cmdOK_Click(Object sender, EventArgs e)
   at System.Windows.Forms.Control.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ButtonBase.WndProc(Message& m)
   at System.Windows.Forms.Button.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
MapWinUtility (debug reporter) Assmebly Version: 2.0.42.50727
Operating System: Win32NT
Service Pack: Service Pack 3, v.3264
Major Version: 5
Minor Version: 1
Revision:  3
Build:  2600
 
Can anyone give me any insight on this issue?
 
Thanks!
Lauren
 


------------------------------------------
You are currently subscribed to the basinsinfo listserver. 

To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov
OR:
Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your 
subscription.
OR
Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov
------------------------------------------

If this email is spam, report it here:
http://www.OnlyMyEmail.com/ReportSpam 

------------------------------------------
You are currently subscribed to the basinsinfo listserver. 

To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov
OR:
Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to 
manage your 
subscription.
OR
Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov
------------------------------------------

--0-1318588760-1221658685=:5416-- ----------------------------------------------------------- X-Message-Number: 22 X-lyris-Id: 173992 Date: Wed, 17 Sep 2008 11:56:44 -0400 From: "Paul Duda" Subject: RE: Basins to HSPF error This is a multi-part message in MIME format. ------=_NextPart_000_0000_01C918BC.74B420D0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hmm, it sounds like the manual delineator is not performing as expected. This may be an issue where a picture is worth a thousand words -- can you make a few screen images and send them to me directly (can't go thru the listserve)? -----Original Message----- From: Lauren Felker [mailto:emerson924@yahoo.com] Sent: Wednesday, September 17, 2008 9:38 AM To: Private list for BASINS users Subject: Re: [basinsinfo] Basins to HSPF error Paul, Running the manual delineator produces 12 instances (among 26 reaches) of multiple segments per subbasin, in some cases there are four separate segments per reach. Also, the stream segments are discontinuous in several places, especially at the intersection of several reaches. When I first used the manual delineator it was creating a very discontinuous stream file, with stream segments completely absent in reaches where they shouldn't have been absent. To fix this problem I went through the NHD file and changed the values in the "Level" field to 1 for the segments that needed to be made a part of the stream file. That fixed my issue so that each reach had a segment like it was supposed to. Could that be contributing to the issue that I have now? Lauren ----- Original Message ---- From: Paul Duda To: Private list for BASINS users Sent: Monday, September 15, 2008 10:12:33 AM Subject: RE: [basinsinfo] Basins to HSPF error I think this problem must be related to the attributes of the streams shapefile that you are using. The HSPF setup tool requires that there be one and only one stream segment per subbasin, and each stream segment must have a unique id in the shapefile attribute table. This rule is enforced by the BASINS delineation tools, but if you are using your own imported delineations I can see how it might be violated. You might need to run the manual delineator to define the stream network and calculate the stream attributes before starting the model setup tool. Paul Duda AQUA TERRA Consultants -----Original Message----- From: Lauren Felker [mailto:emerson924@yahoo.com] Sent: Monday, September 15, 2008 9:36 AM To: Private list for BASINS users Subject: [basinsinfo] Basins to HSPF error Hello all. Here is the content of the error I'm getting when I try to create an HSPF project with the latest version of Basins: BASINS 4 4.5.3048 (5/6/2008) System.ArgumentException: An item with the same key has already been added. at System.ThrowHelper.ThrowArgumentException(ExceptionResource resource) at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add) at System.Collections.ObjectModel.KeyedCollection`2.AddKey(TKey key, TItem item) at System.Collections.ObjectModel.KeyedCollection`2.InsertItem(Int32 index, TItem item) at System.Collections.ObjectModel.Collection`1.Add(T item) at atcModelSetup.frmModelSetup.CreateReachSegments(atcCollection aSubbasinsSelected, atcCollection aSubbasinsModelSegmentIds) at atcModelSetup.frmModelSetup.SetupHSPF(String aOutputPath, String aBaseOutputName) at atcModelSetup.frmModelSetup.cmdOK_Click(Object sender, EventArgs e) at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnClick(EventArgs e) at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ButtonBase.WndProc(Message& m) at System.Windows.Forms.Button.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) MapWinUtility (debug reporter) Assmebly Version: 2.0.42.50727 Operating System: Win32NT Service Pack: Service Pack 3, v.3264 Major Version: 5 Minor Version: 1 Revision: 3 Build: 2600 Can anyone give me any insight on this issue? Thanks! Lauren ------------------------------------------ You are currently subscribed to the basinsinfo listserver. To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov OR: Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your subscription. OR Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov ------------------------------------------ ---------------------------------------------------------------------------- If this email is spam, report it here: http://www.OnlyMyEmail.com/ReportSpam ------------------------------------------ You are currently subscribed to the basinsinfo listserver. To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov OR: Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your subscription. OR Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov ------------------------------------------ ------------------------------------------ You are currently subscribed to the basinsinfo listserver. To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov OR: Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your subscription. OR Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov ------------------------------------------ ---------------------------------------------------------------------------- -- If this email is spam, report it here: http://www.OnlyMyEmail.com/ReportSpam ------=_NextPart_000_0000_01C918BC.74B420D0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hmm,=20 it sounds like the manual delineator is not performing as = expected.  This=20 may be an issue where a picture is worth a thousand words -- can you = make a few=20 screen images and send them to me directly (can't go thru the=20 listserve)?
 
-----Original Message-----
From: Lauren Felker=20 [mailto:emerson924@yahoo.com]
Sent: Wednesday, September 17, = 2008=20 9:38 AM
To: Private list for BASINS users
Subject: = Re:=20 [basinsinfo] Basins to HSPF error

Paul,

 

Running the manual delineator produces 12 instances (among 26 = reaches) of=20 multiple segments per subbasin, in some cases there are four separate = segments=20 per reach. Also, the stream segments are discontinuous in several = places,=20 especially at the intersection of several reaches.

 

When I first used the manual delineator it was creating a very=20 discontinuous stream file, with stream segments = completely absent in=20 reaches where they shouldn't have been absent. To fix this = problem I=20 went through the NHD file and changed the values in the "Level" field = to 1 for=20 the segments that needed to be made a part of the stream file. That = fixed my=20 issue so that each reach had a segment like it was supposed to. Could = that be=20 contributing to the issue that I have now?

 

Lauren



-----=20 Original Message ----
From: Paul Duda = <pbduda@aquaterra.com>
To:=20 Private list for BASINS users = <basinsinfo@lists.epa.gov>
Sent:=20 Monday, September 15, 2008 10:12:33 AM
Subject: RE: [basinsinfo] = Basins to=20 HSPF error

I=20 think this problem must be related to the attributes of the streams = shapefile=20 that you are using.  The HSPF setup tool requires that there be = one and=20 only one stream segment per subbasin, and each stream segment must = have a=20 unique id in the shapefile attribute table.  This rule is = enforced by the=20 BASINS delineation tools, but if you are using your own imported = delineations=20 I can see how it might be violated. 
 
You=20 might need to run the manual delineator to define the stream network = and=20 calculate the stream attributes before starting the model setup=20 tool.
 
Paul=20 Duda
AQUA=20 TERRA Consultants
-----Original Message-----
From: Lauren Felker=20 [mailto:emerson924@yahoo.com]
Sent: Monday, September 15, = 2008=20 9:36 AM
To: Private list for BASINS = users
Subject:=20 [basinsinfo] Basins to HSPF error

Hello all.
 
Here is the content of the error I'm getting when I try to = create an=20 HSPF project with the latest version of Basins:
 
BASINS 4 4.5.3048 (5/6/2008)
System.ArgumentException: An item with the same key has already = been=20 added.
   at=20 System.ThrowHelper.ThrowArgumentException(ExceptionResource=20 resource)
   at=20 System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue = value,=20 Boolean add)
   at=20 System.Collections.ObjectModel.KeyedCollection`2.AddKey(TKey key, = TItem=20 item)
   at=20 System.Collections.ObjectModel.KeyedCollection`2.InsertItem(Int32 = index,=20 TItem item)
   at=20 System.Collections.ObjectModel.Collection`1.Add(T = item)
   at=20 atcModelSetup.frmModelSetup.CreateReachSegments(atcCollection=20 aSubbasinsSelected, atcCollection = aSubbasinsModelSegmentIds)
  =20 at atcModelSetup.frmModelSetup.SetupHSPF(String aOutputPath, String=20 aBaseOutputName)
   at=20 atcModelSetup.frmModelSetup.cmdOK_Click(Object sender, EventArgs=20 e)
   at System.Windows.Forms.Control.OnClick(EventArgs = e)
   at System.Windows.Forms.Button.OnClick(EventArgs=20 e)
   at = System.Windows.Forms.Button.OnMouseUp(MouseEventArgs=20 mevent)
   at=20 System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons = button,=20 Int32 clicks)
   at=20 System.Windows.Forms.Control.WndProc(Message& m)
   = at=20 System.Windows.Forms.ButtonBase.WndProc(Message& = m)
   at=20 System.Windows.Forms.Button.WndProc(Message& m)
   = at=20 = System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message&=20 m)
   at=20 = System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message&=20 m)
   at = System.Windows.Forms.NativeWindow.Callback(IntPtr=20 hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
MapWinUtility (debug reporter) Assmebly Version:=20 2.0.42.50727
Operating System: Win32NT
Service Pack: Service = Pack 3,=20 v.3264
Major Version: 5
Minor=20 = Version: 1
Revision:  3
Build:  2600
=
 
Can anyone give me any insight on this issue?
 
Thanks!
Lauren
=
 


-------------------------------------=
-----
You are currently subscribed to the basinsinfo listserver.=20

To unsubscribe, send the words unsubscribe basinsinfo to =
lyris@lists.epa.gov
OR:
Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage =
your=20
subscription.
OR
Contact the basinsinfo listserver owner at =
basinsinfo-Owner@lists.epa.gov
------------------------------------------

If=20 this email is spam, report it here:
http://www.OnlyMyEmail.com/ReportSpam=20 = 
------------------------------------------
You are currently subscribed to the basinsinfo listserver.=20

To unsubscribe, send the words unsubscribe basinsinfo to =
lyris@lists.epa.gov
OR:
Use the listserver's web interface at =
https://lists.epa.gov/cgi-bin/lyris.pl to manage your=20
subscription.
OR
Contact the basinsinfo listserver owner at =
basinsinfo-Owner@lists.epa.gov
------------------------------------------

------------------------------------------
You are currently subscribed to the basinsinfo listserver.=20

To unsubscribe, send the words unsubscribe basinsinfo to =
lyris@lists.epa.gov
OR:
Use the listserver's web interface at =
https://lists.epa.gov/cgi-bin/lyris.pl to manage your=20
subscription.
OR
Contact the basinsinfo listserver owner at =
basinsinfo-Owner@lists.epa.gov
------------------------------------------

If=20 this email is spam, report it here:
http://www.OnlyMyEmail.com= /ReportSpam=20 ------=_NextPart_000_0000_01C918BC.74B420D0-- ----------------------------------------------------------- X-Message-Number: 23 X-lyris-Id: 174036 Date: Thu, 18 Sep 2008 14:25:20 -0500 From: "Lian, Yanqing" Subject: BASINS 4.0 error message This is a multi-part message in MIME format. ------_=_NextPart_001_01C919C4.4AA1F914 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable I just installed BASINS 4.0 latest version. I was trying to create a project for the Illinois River basin. It had error when creating project with more than one catalog units (Bad File Name or Number (shapeutil)). It had not problem for single catalog unit.=20 =20 BTW, I am very glad to see model developers, particularly Paul, to have direct input to the problems. Truly appreciate the support and effort from EPA and all the developers. It has been very helpful for our projects in Illinois over the past 8 years.=20 =20 Yanqing Lian Illinois State Water Survey =20 ------_=_NextPart_001_01C919C4.4AA1F914 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

I just installed BASINS 4.0 latest version. I was trying = to create a project for the Illinois River basin. It had error when = creating project with more than one catalog units (Bad File Name or Number = (shapeutil)). It had not problem for single catalog unit.

 

BTW, I am very glad to see model developers, particularly = Paul,  to have direct input to the problems. Truly appreciate the support and = effort from EPA and all the developers. It has been very helpful for our projects in Illinois over the past 8 years.

 

Yanqing Lian

Illinois State Water =
Survey
 
------_=_NextPart_001_01C919C4.4AA1F914-- ----------------------------------------------------------- X-Message-Number: 24 X-lyris-Id: 174044 Date: Thu, 18 Sep 2008 17:39:12 -0400 From: "Iskra, Igor" Subject: HSPF performance in Arctic climate This is a multi-part message in MIME format. ------_=_NextPart_001_01C919D6.EE7BA894 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi all, =20 Any experience on HSPF application for Arctic watersheds. I need to look = at hydrology, snowmelt, continuous simulation of flow, climate change = scenarios for a watershed which is located on 65 deg latitude in Nunavut (Canada). = It is a permafrost region, the river flows only 2 months (July-August), and snowmelt is a driving force. =20 Is HSPF a suitable choice? =20 Thank you very much, =20 igor=20 =20 =20 =20 =20 =20 Igor Iskra, PhD, P.Eng. Water Resources Engineer Dillon Consulting Limited 235 Yorkland Blvd, Suite 800 Toronto, Ontario, M2J 4Y8 Tel: (416) 229-4647 ext 2321 Fax: (416) 229-4692 email: iiskra@dillon.ca =20 www.dillon.ca =20 This message is directed in confidence solely to the person(s) named abov= e and may contain privileged, confidential or private information which is not to be disclo= sed. If you are not the addressee or an authorized representative thereof, please contact the und= ersigned and then destroy this message. Ce message est destine uniquement aux personnes indiquees dans l'entete e= t peut contenir une information privilegiee, confidentielle ou privee et ne= pouvant etre divulguee. Si vous n'etes pas le destinataire de ce message ou une person= ne autorisee a le recevoir, veuillez communiquer avec le soussigne et ensuite detruire= ce message. =0D ------_=_NextPart_001_01C919D6.EE7BA894 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

Hi all,

 

Any experience on HSPF application for Arctic watersheds. I need to look at hydrology, snowmelt, continuous simulation = of flow, climate change scenarios for a watershed which is located on 65 = deg latitude in Nunavut (Canada). It is a = permafrost region, the river flows only 2 months (July-August), and snowmelt is a driving = force.

 

Is HSPF a suitable = choice?

 

Thank you very = much,

 

igor

 

 

 

 

 

Igor = Iskra, PhD, P.Eng.

Water Resources Engineer

Dillon Consulting Limited

235 Yorkland Blvd, Suite 800

Toronto, Ontario, M2J 4Y8

Tel: (416) 229-4647 ext = 2321

Fax: (416) 229-4692

email: iiskra@dillon.ca

www.dillon.ca

 = 

This message is directed in confidence solely to the person(s) named abov=
e and may contain
privileged, confidential or private information which is not to be disclo=
sed. If you are not the
addressee or an authorized representative thereof, please contact the und=
ersigned and
then destroy this message.

Ce message est destine uniquement aux personnes indiquees dans l'entete e=
t
peut contenir une information privilegiee, confidentielle ou privee et ne=
 pouvant etre
divulguee. Si vous n'etes pas le destinataire de ce message ou une person=
ne autorisee
a le recevoir, veuillez communiquer avec le soussigne et ensuite detruire=
 ce message.
=0D
------_=_NextPart_001_01C919D6.EE7BA894--


-----------------------------------------------------------

X-Message-Number: 25
X-lyris-Id: 174046
Date: Thu, 18 Sep 2008 17:41:44 -0700
From: Tony Donigian 
Subject: Re: HSPF performance in Arctic climate




  


Igor -

HSPF has been extensively in the Northern Alberta Oil Sands region, and
has been accepted as the primary tool for assessing mining impacts and
remediation alternatives.



The latitude is in the range of 55 - 60 degrees, so slightly further
south than your study area, and the soil/terrain is referred to as
'muskeg', not really permafrost, but deep highly organic material, and
snow is the dominant form of precipitation.



If you're interested, let me know, and I can send  a few papers to your
personal email address - or you can google some terms like,
hspf+muskeg, Muskeg River, oil sands, modeling, etc.  



Tony








~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~









~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


Tony
Donigian, P.E., D.WRE


AQUA
TERRA Consultants


2685
Marine Way, Suite 1314


Mountain
View,
CA 94043-1115


650-962-1864;
fax 650-962-0706


www.aquaterra.com


 









Iskra, Igor wrote:


  
  
  
  
  
  

  
  

  

  
Hi 
all,

  
 

  
Any
experience on HSPF application for Arctic
watersheds. I need to look at hydrology, snowmelt, continuous
simulation of
flow, climate change scenarios for a watershed which is located on 65
deg latitude
in Nunavut (Canada).
It is a permafrost region,
the river flows only 2 months (July-August), and snowmelt is a driving
force.

  
 

  
Is HSPF a
suitable choice?

  
 

  
Thank you
very much,

  
 

  
igor 


  
 

  
 

  
 

  
 

  
 

  
Igor
Iskra, PhD, P.Eng.

  
Water
Resources Engineer

  
Dillon
Consulting Limited

  
235 Yorkland
Blvd, Suite 800

  
Toronto, Ontario, M2J 
4Y8

  
Tel: (416)
229-4647 ext 2321

  
Fax: (416)
229-4692

  
email: 
iiskra@dillon.ca 

  
www.dillon.ca

  
 

  

  

  
------------------------------------------
You are currently subscribed to the basinsinfo listserver. 

To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov
OR:
Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your 
subscription.
OR
Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov
------------------------------------------


  

  

  If
this email is spam, report it here:

  http://www.OnlyMyEmail.com/ReportSpam
  
  
This message is directed in confidence solely to the person(s) named 
above and may contain
privileged, confidential or private information which is not to be disclosed. 
If you are not the
addressee or an authorized representative thereof, please contact the 
undersigned and
then destroy this message.

Ce message est destine uniquement aux personnes indiquees dans l'entete et
peut contenir une information privilegiee, confidentielle ou privee et ne 
pouvant etre
divulguee. Si vous n'etes pas le destinataire de ce message ou une personne 
autorisee
a le recevoir, veuillez communiquer avec le soussigne et ensuite detruire ce 
message.


  








-----------------------------------------------------------

X-Message-Number: 26
X-lyris-Id: 174087
Date: Fri, 19 Sep 2008 11:54:14 -0400
From: "Paul Duda" 
Subject: RE: BASINS 4.0 error message

This is a multi-part message in MIME format.

------=_NextPart_000_0020_01C91A4E.6FAD00F0
Content-Type: text/plain;
   charset="us-ascii"
Content-Transfer-Encoding: 7bit

Hi Yanging,

I just did a quick test to see that building a project from multiple
cataloging units works, and it does, so there must be something specific to
your cataloging units that is the problem.  Let us know more details, such
as which cataloging units you are working with, and we'll try to reproduce
it here.

Paul
  -----Original Message-----
  From: Lian, Yanqing [mailto:y-lian@sws.uiuc.edu]
  Sent: Thursday, September 18, 2008 3:25 PM
  To: Private list for BASINS users
  Subject: [basinsinfo] BASINS 4.0 error message


  I just installed BASINS 4.0 latest version. I was trying to create a
project for the Illinois River basin. It had error when creating project
with more than one catalog units (Bad File Name or Number (shapeutil)). It
had not problem for single catalog unit.



  BTW, I am very glad to see model developers, particularly Paul,  to have
direct input to the problems. Truly appreciate the support and effort from
EPA and all the developers. It has been very helpful for our projects in
Illinois over the past 8 years.



  Yanqing Lian

Illinois State Water Survey

------------------------------------------
You are currently subscribed to the basinsinfo listserver.

To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov
OR:
Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl
to manage your
subscription.
OR
Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov
------------------------------------------

----------------------------------------------------------------------------
--
  If this email is spam, report it here:
  http://www.OnlyMyEmail.com/ReportSpam

------=_NextPart_000_0020_01C91A4E.6FAD00F0
Content-Type: text/html;
   charset="us-ascii"
Content-Transfer-Encoding: quoted-printable









Hi=20
Yanging,


 


I just=20
did a quick test to see that building a project from multiple cataloging =
units=20
works, and it does, so there must be something specific to your =
cataloging units=20
that is the problem.  Let us know more details, such as which =
cataloging=20
units you are working with, and we'll try to reproduce it=20
here.


 


Paul



  
-----Original Message-----
From: Lian, Yanqing=20
  [mailto:y-lian@sws.uiuc.edu]
Sent: Thursday, September 18, =
2008 3:25=20
  PM
To: Private list for BASINS users
Subject: =
[basinsinfo]=20
  BASINS 4.0 error message


  

  
I=20
  just installed BASINS 4.0 latest version. I was trying to create a =
project for=20
  the Illinois River basin. It had error when creating project with more =
than=20
  one catalog units (Bad File Name or Number (shapeutil)). It had not =
problem=20
  for single catalog unit. 

  
 

  
BTW,=20
  I am very glad to see model developers, particularly Paul,  to =
have=20
  direct input to the problems. Truly appreciate the support and effort =
from EPA=20
  and all the developers. It has been very helpful for our projects in =
Illinois=20
  over the past 8 years. 

  
 

  
Yanqing=20
  Lian
Illinois =
State Water Survey
 

----=
--------------------------------------
You are currently subscribed to the basinsinfo listserver.=20

To unsubscribe, send the words unsubscribe basinsinfo to =
lyris@lists.epa.gov
OR:
Use the listserver's web interface at =
https://lists.epa.gov/cgi-bin/lyris.pl to manage your=20
subscription.
OR
Contact the basinsinfo listserver owner at =
basinsinfo-Owner@lists.epa.gov
------------------------------------------


  

  If=20
  this email is spam, report it here:
http://www.OnlyMyEmail.com=
/ReportSpam=20
  


------=_NextPart_000_0020_01C91A4E.6FAD00F0--




-----------------------------------------------------------

X-Message-Number: 27
X-lyris-Id: 174088
Date: Fri, 19 Sep 2008 09:05:13 -0700
From: "Sarah Praskievicz" 
Subject: WinHSPF error 341

------=_Part_16948_7459684.1221840313587
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

Hello,

I am a new BASINS user, attempting to use WinHSPF to model the hydrology of
the Tualatin River Basin in Oregon.  My eventual goal, part of my thesis
work, is to simulate changes in flow, sediments, and nutrients resulting
from climate change and urban development in the basin.  However, I am
unable to get results for the baseline flow because I cannot get the model
to run.  I consistently get the following error:

ERROR/WARNING ID:   341
6                                                     *
 *
*
 *  DATE/TIME: 1972/ 1/ 8  3:
0                                                     *
 *
*
 *  RCHRES:
16                                                                   *
 *
*
 *  The volume of water in this reach/mixed reservoir is greater than the
value     *
 *  in the "volume" column of the last row of RCHTAB().  To continue
the            *
 *  simulation the table has been extrapolated, based on information
contained      *
 *  in the last two rows.  This will usually result in some loss of
accuracy.       *
 *  If depth is being calculated it will also cause an error
condition.             *
 *  Relevant data
are:                                                              *
 *
*
 *  NROWS         V1         V2
VOL                                          *
 *      8 2.8084E+09 7.7906E+09
8.7043E+09                                          *

I don't know what this error means or how I can fix it.  Is it possibly a
problem with the data I'm using, which I got through the BASINS data
download tool?  Or is it a problem with the way the subbasins are defined (I
used the automatic watershed delineation)?  Or something else altogether?

I would greatly appreciate any insight on the nature of this error and how
it might be resolved.

Thanks,
Sarah Praskievicz
Portland State University

------=_Part_16948_7459684.1221840313587
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline


Hello,
 
I am a new BASINS user, attempting to =
use WinHSPF to model the hydrology of the Tualatin River Basin in Oregon.&n=
bsp; My eventual goal, part of my thesis work, is to simulate changes in fl=
ow, sediments, and nutrients resulting from climate change and urban develo=
pment in the basin.  However, I am unable to get results for the basel=
ine flow because I cannot get the model to run.  I consistently get th=
e following error:

 
ERROR/WARNING ID:   341   6   =
            &nb=
sp;            =
            &nb=
sp;            *
=
 *           &n=
bsp;            =
;            &n=
bsp;            =
;            &n=
bsp;            =
;        *
 *  DATE/TIME: 1=
972/ 1/ 8  3: 0         &=
nbsp;           &nbs=
p;            &=
nbsp;           &nbs=
p;      *

 *           &n=
bsp;            =
;            &n=
bsp;            =
;            &n=
bsp;            =
;        *
 *  RCHRES: =
;   16          =
;            &n=
bsp;            =
;            &n=
bsp;            =
;       *
 *    &=
nbsp;           &nbs=
p;            &=
nbsp;           &nbs=
p;            &=
nbsp;           &nbs=
p;            &=
nbsp;  *

 *  The volume of water in this reach/mixed reservoir is greater =
than the value     *
 *  in the "volu=
me" column of the last row of RCHTAB().  To continue the &nb=
sp;          *
 * =
; simulation the table has been extrapolated, based on information containe=
d      *

 *  in the last two rows.  This will usually result in some =
loss of accuracy.       *
 *  If=
 depth is being calculated it will also cause an error condition. &nbs=
p;           *
 *=
  Relevant data are:        &n=
bsp;            =
;            &n=
bsp;            =
;            &n=
bsp;   *

 *           &n=
bsp;            =
;            &n=
bsp;            =
;            &n=
bsp;            =
;        *
 *  NROWS &=
nbsp;       V1     &=
nbsp;   V2        VOL &nb=
sp;            =
            &nb=
sp;            =
   *
 *      8 2.8084E+09 7.7906=
E+09 8.7043E+09          =
            &nb=
sp;            =
       *

 
I don't know what this error means or how I can fix it. =
 Is it possibly a problem with the data I'm using, which I got through =
the BASINS data download tool?  Or is it a problem with the way the su=
bbasins are defined (I used the automatic watershed delineation)?  Or =
something else altogether?  

 
I would greatly appreciate any insight on the nature of this erro=
r and how it might be resolved.
 
Thanks,
Sarah PraskieviczPortland State University


------=_Part_16948_7459684.1221840313587--


-----------------------------------------------------------

X-Message-Number: 28
X-lyris-Id: 174089
Date: Fri, 19 Sep 2008 12:23:54 -0400
From: Carleton.Jim@epamail.epa.gov
Subject: Re: WinHSPF error 341

Hi Sarah,

The problem is with your Ftable (i.e. details of stream channel
cross-sectional geometry): the maximum defined reach volume is less than
the volume of water that HSPF is simulating as being present.  I
recommend having a look at BASINS "technical note
#2" (http://www.epa.gov/waterscience/basins/docs/tecnote2.pdf) for some
insight into the problem, and a possible solution.  You can also build a
new Ftable manually if you have some representative stream
cross-sectional geometry data to work with.




                                                                        
             "Sarah                                                     
             Praskievicz"                                               
                                  "Private list for BASINS users"   
                                              
             09/19/2008 12:05                                        cc 
             PM                                                         
                                                                Subject 
                                      [basinsinfo] WinHSPF error 341    
              Please respond                                            
                    to                                                  
              "Private list                                             
                for BASINS                                              
                  users"                                                
                                                           
                                                                        
                                                                        




Hello,

I am a new BASINS user, attempting to use WinHSPF to model the hydrology
of the Tualatin River Basin in Oregon.  My eventual goal, part of my
thesis work, is to simulate changes in flow, sediments, and nutrients
resulting from climate change and urban development in the basin.
However, I am unable to get results for the baseline flow because I
cannot get the model to run.  I consistently get the following error:

ERROR/WARNING ID:   341   6
*
 *
*
 *  DATE/TIME: 1972/ 1/ 8  3: 0
*
 *
*
 *  RCHRES:    16
*
 *
*
 *  The volume of water in this reach/mixed reservoir is greater than
the value     *
 *  in the "volume" column of the last row of RCHTAB().  To continue the
*
 *  simulation the table has been extrapolated, based on information
contained      *
 *  in the last two rows.  This will usually result in some loss of
accuracy.       *
 *  If depth is being calculated it will also cause an error condition.
*
 *  Relevant data are:
*
 *
*
 *  NROWS         V1         V2        VOL
*
 *      8 2.8084E+09 7.7906E+09 8.7043E+09
*

I don't know what this error means or how I can fix it.  Is it possibly
a problem with the data I'm using, which I got through the BASINS data
download tool?  Or is it a problem with the way the subbasins are
defined (I used the automatic watershed delineation)?  Or something else
altogether?

I would greatly appreciate any insight on the nature of this error and
how it might be resolved.

Thanks,
Sarah Praskievicz
Portland State University
------------------------------------------
You are currently subscribed to the basinsinfo listserver.

To unsubscribe, send the words unsubscribe basinsinfo to
lyris@lists.epa.gov
OR:
Use the listserver's web interface at
https://lists.epa.gov/cgi-bin/lyris.pl to manage your
subscription.
OR
Contact the basinsinfo listserver owner at
basinsinfo-Owner@lists.epa.gov
------------------------------------------



-----------------------------------------------------------

X-Message-Number: 29
X-lyris-Id: 174090
Date: Fri, 19 Sep 2008 10:31:29 -0700
From: "Ashley Perkins" 
Subject: Re: WinHSPF error 341

------=_Part_31112_33510910.1221845489451
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

Sarah,

There is also a very useful dialogue about this error in the listserve
archives.  I can't remember which month of the top of my head... Search for
RCHTAB.

Cheers,
Ashley


On Fri, Sep 19, 2008 at 9:23 AM,  wrote:

> Hi Sarah,
>
> The problem is with your Ftable (i.e. details of stream channel
> cross-sectional geometry): the maximum defined reach volume is less than
> the volume of water that HSPF is simulating as being present.  I
> recommend having a look at BASINS "technical note
> #2" (http://www.epa.gov/waterscience/basins/docs/tecnote2.pdf) for some
> insight into the problem, and a possible solution.  You can also build a
> new Ftable manually if you have some representative stream
> cross-sectional geometry data to work with.
>
>
>
>
>
>             "Sarah
>             Praskievicz"
>                          com>                     "Private list for BASINS users"
>                                      
>             09/19/2008 12:05                                        cc
>             PM
>                                                                Subject
>                                      [basinsinfo] WinHSPF error 341
>              Please respond
>                    to
>              "Private list
>                for BASINS
>                  users"
>                             s.epa.gov>
>
>
>
>
>
>
> Hello,
>
> I am a new BASINS user, attempting to use WinHSPF to model the hydrology
> of the Tualatin River Basin in Oregon.  My eventual goal, part of my
> thesis work, is to simulate changes in flow, sediments, and nutrients
> resulting from climate change and urban development in the basin.
> However, I am unable to get results for the baseline flow because I
> cannot get the model to run.  I consistently get the following error:
>
> ERROR/WARNING ID:   341   6
> *
>  *
> *
>  *  DATE/TIME: 1972/ 1/ 8  3: 0
> *
>  *
> *
>  *  RCHRES:    16
> *
>  *
> *
>  *  The volume of water in this reach/mixed reservoir is greater than
> the value     *
>  *  in the "volume" column of the last row of RCHTAB().  To continue the
> *
>  *  simulation the table has been extrapolated, based on information
> contained      *
>  *  in the last two rows.  This will usually result in some loss of
> accuracy.       *
>  *  If depth is being calculated it will also cause an error condition.
> *
>  *  Relevant data are:
> *
>  *
> *
>  *  NROWS         V1         V2        VOL
> *
>  *      8 2.8084E+09 7.7906E+09 8.7043E+09
> *
>
> I don't know what this error means or how I can fix it.  Is it possibly
> a problem with the data I'm using, which I got through the BASINS data
> download tool?  Or is it a problem with the way the subbasins are
> defined (I used the automatic watershed delineation)?  Or something else
> altogether?
>
> I would greatly appreciate any insight on the nature of this error and
> how it might be resolved.
>
> Thanks,
> Sarah Praskievicz
> Portland State University
> ------------------------------------------
> You are currently subscribed to the basinsinfo listserver.
>
> To unsubscribe, send the words unsubscribe basinsinfo to
> lyris@lists.epa.gov
> OR:
> Use the listserver's web interface at
> https://lists.epa.gov/cgi-bin/lyris.pl to manage your
> subscription.
> OR
> Contact the basinsinfo listserver owner at
> basinsinfo-Owner@lists.epa.gov
> ------------------------------------------
>
>
> ------------------------------------------
> You are currently subscribed to the basinsinfo listserver.
>
> To unsubscribe, send the words unsubscribe basinsinfo to
> lyris@lists.epa.gov
> OR:
> Use the listserver's web interface at
> https://lists.epa.gov/cgi-bin/lyris.pl to manage your
> subscription.
> OR
> Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov
> ------------------------------------------
>

------=_Part_31112_33510910.1221845489451
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Content-Disposition: inline


Sarah, 


 


There is also a very useful dialogue about this error in the 
listserve archives.  I can't remember which month of the top of my 
head... Search for RCHTAB.  


 


Cheers,


Ashley


 


 


On Fri, Sep 19, 2008 at 9:23 AM, <Carleton.Jim@epamail.epa.gov> wrote:


Hi Sarah,

The problem is with your 
Ftable (i.e. details of stream channel
cross-sectional geometry): the 
maximum defined reach volume is less than

the volume of water that HSPF is simulating as being present. 
 I
recommend having a look at BASINS "technical note
#2" 
(http://www.epa.gov/waterscience/basins/docs/tecnote2.pdf) 
for some

insight into the problem, and a possible solution.  You can also build 
a
new Ftable manually if you have some representative 
stream
cross-sectional geometry data to work 
with.





            
"Sarah

            Praskievicz"
    
        <spraskie@gmail.         
                      
         To
          
  com>                   
  "Private list for BASINS users"
        
                      
       <basinsinfo@lists.epa.gov>

            09/19/2008 12:05       
                      
           cc
        
    PM
                
                      
                      
   Subject
                
                    
 [basinsinfo] WinHSPF error 341

             Please respond
    
               to
    
         "Private list
      
         for BASINS
        
         users"
        
    <basinsinfo@list
            
   s.epa.gov>













Hello,

I am a new BASINS 
user, attempting to use WinHSPF to model the hydrology
of the Tualatin River 
Basin in Oregon.  My eventual goal, part of my
thesis work, is to 
simulate changes in flow, sediments, and nutrients

resulting from climate change and urban development in the basin.
However, I 
am unable to get results for the baseline flow because I
cannot get the 
model to run.  I consistently get the following 
error:

ERROR/WARNING ID:   341   6

*
 *
*
 *  DATE/TIME: 1972/ 1/ 8  3: 
0
*
 *
*
 *  RCHRES:   
 16
*
 *
*
 *  The volume of water in this 
reach/mixed reservoir is greater than
the value     *
 * 
 in the "volume" column of the last row of RCHTAB().  To 
continue the

*
 *  simulation the table has been extrapolated, based on 
information
contained      *
 *  in the last two 
rows.  This will usually result in some loss of
accuracy.     
  *
 *  If depth is being calculated it will also cause an 
error condition.

*
 *  Relevant data are:
*
 *
*
 * 
 NROWS         V1         V2 
       VOL
*
 *      8 2.8084E+09 
7.7906E+09 8.7043E+09
*

I don't know what this error means or how 
I can fix it.  Is it possibly

a problem with the data I'm using, which I got through the BASINS 
data
download tool?  Or is it a problem with the way the subbasins 
are
defined (I used the automatic watershed delineation)?  Or something 
else

altogether?

I would greatly appreciate any insight on the nature of this 
error and
how it might be resolved.

Thanks,
Sarah 
Praskievicz
Portland State 
University
------------------------------------------

You are currently subscribed to the basinsinfo listserver.

To 
unsubscribe, send the words unsubscribe basinsinfo to
lyris@lists.epa.gov
OR:
Use the 
listserver's web interface at

https://lists.epa.gov/cgi-bin/lyris.pl to manage 
your
subscription.
OR
Contact the basinsinfo listserver owner at
basinsinfo-Owner@lists.epa.gov

------------------------------------------


--------------------------
----------------
You are currently subscribed to the basinsinfo 
listserver.

To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov

OR:
Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage 
your
subscription.
OR
Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov

------------------------------------------



------=_Part_31112_33510910.1221845489451--


-----------------------------------------------------------

X-Message-Number: 30
X-lyris-Id: 174095
Date: Fri, 19 Sep 2008 16:00:44 -0500
From: "Lian, Yanqing" 
Subject: RE: BASINS 4.0 error message

This is a multi-part message in MIME format.

------_=_NextPart_001_01C91A9A.C9461396
Content-Type: text/plain;
   charset="us-ascii"
Content-Transfer-Encoding: quoted-printable

Paul,

=20

These are the catalog units for the Illinois River basin.

=20

4040001

4040002

4040003

4050001

7110009

7120001

7120002

7120003

7120004

7120005

7120006

7120007

7130001

7130002

7130003

7130004

7130005

7130006

7130007

7130008

7130009

7130010

7130011

7130012

=20

Thanks a lot for your quick response and help.

=20

Yanqing

=20

From: Paul Duda [mailto:pbduda@aquaterra.com]=20
Sent: Friday, September 19, 2008 10:54 AM
To: Private list for BASINS users
Subject: RE: [basinsinfo] BASINS 4.0 error message

=20

Hi Yanging,

=20

I just did a quick test to see that building a project from multiple
cataloging units works, and it does, so there must be something specific
to your cataloging units that is the problem.  Let us know more details,
such as which cataloging units you are working with, and we'll try to
reproduce it here.

=20

Paul

   -----Original Message-----
   From: Lian, Yanqing [mailto:y-lian@sws.uiuc.edu]
   Sent: Thursday, September 18, 2008 3:25 PM
   To: Private list for BASINS users
   Subject: [basinsinfo] BASINS 4.0 error message

   I just installed BASINS 4.0 latest version. I was trying to
create a project for the Illinois River basin. It had error when
creating project with more than one catalog units (Bad File Name or
Number (shapeutil)). It had not problem for single catalog unit.=20

   =20

   BTW, I am very glad to see model developers, particularly Paul,
to have direct input to the problems. Truly appreciate the support and
effort from EPA and all the developers. It has been very helpful for our
projects in Illinois over the past 8 years.=20

   =20

   Yanqing Lian

   Illinois State Water Survey
   =20

   =20

   ------------------------------------------
   You are currently subscribed to the basinsinfo listserver.=20
   =20
   To unsubscribe, send the words unsubscribe basinsinfo to
lyris@lists.epa.gov
   OR:
   Use the listserver's web interface at
https://lists.epa.gov/cgi-bin/lyris.pl to manage your=20
   subscription.
   OR
   Contact the basinsinfo listserver owner at
basinsinfo-Owner@lists.epa.gov
   ------------------------------------------

   =20

________________________________

   If this email is spam, report it here:
   http://www.OnlyMyEmail.com/ReportSpam
 =20

=20

------------------------------------------
You are currently subscribed to the basinsinfo listserver.=20
=20
To unsubscribe, send the words unsubscribe basinsinfo to
lyris@lists.epa.gov
OR:
Use the listserver's web interface at
https://lists.epa.gov/cgi-bin/lyris.pl to manage your=20
subscription.
OR
Contact the basinsinfo listserver owner at
basinsinfo-Owner@lists.epa.gov
------------------------------------------

------_=_NextPart_001_01C91A9A.C9461396
Content-Type: text/html;
   charset="us-ascii"
Content-Transfer-Encoding: quoted-printable

















Paul,



 



These are the catalog units for the Illinois River =
basin.



 




 

  
  
4040001

  		
 

 

  
  
4040002

  		
 

 

  
  
4040003

  		
 

 

  
  
4050001

  		
 

 

  
  
7110009

  		
 

 

  
  
7120001

  		
 

 

  
  
7120002

  		
 

 

  
  
7120003

  		
 

 

  
  
7120004

  		
 

 

  
  
7120005

  		
 

 

  
  
7120006

  		
 

 

  
  
7120007

  		
 

 

  
  
7130001

  		
 

 

  
  
7130002

  		
 

 

  
  
7130003

  		
 

 

  
  
7130004

  		
 

 

  
  
7130005

  		
 

 

  
  
7130006

  		
 

 

  
  
7130007

  		
 

 

  
  
7130008

  		
 

 

  
  
7130009

  		
 

 

  
  
7130010

  		
 

 

  
  
7130011

  		
 

 

  
  
7130012

  		
 





 



Thanks a lot for your quick response and =
help.



 



Yanqing



 









From:=
 Paul Duda
[mailto:pbduda@aquaterra.com] 

Sent: Friday, September 19, 2008 10:54 AM

To: Private list for BASINS users

Subject: RE: [basinsinfo] BASINS 4.0 error =
message









 






Hi Yanging,









 









I just did a quick test to see that building a project from
multiple cataloging units works, and it does, so there must be something
specific to your cataloging units that is the problem.  Let us know =
more
details, such as which cataloging units you are working with, and we'll =
try to
reproduce it here.









 









Paul









-----Original Message-----

From: Lian, Yanqing [mailto:y-lian@sws.uiuc.edu]

Sent: Thursday, September 18, 2008 3:25 PM

To: Private list for BASINS users

Subject: [basinsinfo] BASINS 4.0 error =
message



I just installed BASINS 4.0 latest version. I was trying =
to
create a project for the Illinois River basin. It had error when =
creating
project with more than one catalog units (Bad File Name or Number =
(shapeutil)).
It had not problem for single catalog unit. 



 



BTW, I am very glad to see model developers, particularly =
Paul,
 to have direct input to the problems. Truly appreciate the support =
and
effort from EPA and all the developers. It has been very helpful for our
projects in Illinois over the past 8 years. 



 



Yanqing Lian



Illinois State Water =
Survey
 



 



------------------------------------------
You =
are currently subscribed to the basinsinfo listserver. =

 
To unsubscribe, send =
the words unsubscribe basinsinfo to =
lyris@lists.epa.gov
OR:
Use =
the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl =
to manage your =

subscription.
OR
Contact the basinsinfo listserver owner at =
basinsinfo-Owner@lists.epa.gov
---------------------=
---------------------



 












If this email is spam, report it here:

http://www.OnlyMyEmail.com/ReportSpam =







 



------------------------------------------
You =
are currently subscribed to the basinsinfo listserver. =

 
To unsubscribe, send =
the words unsubscribe basinsinfo to =
lyris@lists.epa.gov
OR:
Use =
the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl =
to manage your =

subscription.
OR
Contact the basinsinfo listserver owner at =
basinsinfo-Owner@lists.epa.gov
---------------------=
---------------------






------_=_NextPart_001_01C91A9A.C9461396--


-----------------------------------------------------------

X-Message-Number: 31
X-lyris-Id: 174119
Date: Mon, 22 Sep 2008 12:21:20 -0400
From: "Paul Duda" 
Subject: BASINS 4.0 Update 8/8/08 available

The lastest BASINS 4.0 update (dated 8/8/08) is posted on the BASINS web
page at
http://www.epa.gov/waterscience/ftp/basins/system/BASINS4/


Changes since 2007-11-01 Update of BASINS 4.0:

Updated MapWindow components to candidate Version 4.5

All downloaded data handled by new data download tool from D4EM
(Data for Environmental Modeling) project.
New data download sources NLCD2001 and NHDPlus.
Old data sources updated including modernized STORET and USGS NWIS.
Press F1 while new download form is open for updated documentation.

Opening of USGS data files (RDB) directly without need to import to WDM.
Opening of data files by dragging them onto the map or onto Manage Data
form.

When selecting data sets to analyze, constituent value lists now
automatically scroll to a matching value if user types a constituent value.

Updated meteorologic (WDM) database through 2006

New Plug-in to access EPA's DFLOW for estimating design flows

Improved delineation and model segmentation tools

Improved analysis tools including model output reports, improved graphics

Now able to open MrSid grids




-----------------------------------------------------------

X-Message-Number: 32
X-lyris-Id: 174141
Date: Tue, 23 Sep 2008 22:02:46 +0800
From: "F. Zhou" 
Subject: questions about WinHSPF within BASINS

------=_Part_142055_4598865.1222178566612
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

Thanks so much for your attention. I created a watershed model using HSPF
version 11 four years ago, However, it cannot be run within BASINS
(WinHSPF), could you tell me how to convert my HSPF11 model to run under
WinHSPF (or HSPF12)? thanks again.

-- 
Feng

==================================
Feng ZHOU, Ph.D Candidate
College of Environmental Sciences and Engineering
Peking University
Beijing, 100871, CHINA
Email: jardon.zhou@gmail.com
Website:http://www.ccepr.org
==================================

------=_Part_142055_4598865.1222178566612
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Content-Disposition: inline


Thanks so much for your attention. I created a watershed model 
using HSPF version 11 four years ago, However, it cannot be run within BASINS 
(WinHSPF), could you tell me how to convert my HSPF11 model to run under 
WinHSPF (or HSPF12)? thanks again. 


-- 
Feng

==================================
Feng ZHOU, Ph.D 
Candidate
College of Environmental Sciences and Engineering
Peking 
University
Beijing, 100871, CHINA
Email: jardon.zhou@gmail.com

Website:http://www.ccepr.org
==================================


------=_Part_142055_4598865.1222178566612--


-----------------------------------------------------------

X-Message-Number: 33
X-lyris-Id: 174316
Date: Fri, 26 Sep 2008 09:25:56 -0700
From: "Sarah Praskievicz" 
Subject: Re: WinHSPF error 341

------=_Part_21271_21188526.1222446356190
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

Hello everyone,

Thanks to Jim and Ashley for your help.  I have tried editing the FTable,
but unfortunately I am still getting the same error 341.  Here is the
default FTable for the reach that is causing the problem, automatically
calculated by WinHSPF using the standard method:

Depth (ft)  Area (acres)  Volume (acre-ft)  Outflow1 (ft3/s)
0 102.4729 0 0
0.356077 103.2412 36.62505 5.059397
3.56077 110.1559 378.5612 233.6527
4.451 112.0767 477.4803 338.6457
5.5637 337.1892 849.9993 431.0231
6.6764 341.9909 1227.861 787.418
114.6122 807.7701 63278.05 305059.1
222.548 1273.549 175602.5 1222056
As I now understand it, the problem is that the total of the values in
column three (the maximum reach volume) is less than the total of the values
in column four (the volume of water in the reach).  I tried manually editing
the values so those in column three are greater than those in column four
(in common units), but I keep getting the same error: "The volume of water
in this reach/mixed reservoir is greater than the value in the "volume"
column of the last row of RCHTAB()."  What am I doing wrong?

One more question.  When I view the watershed map in BASINS, it is oriented
with the upstream end, which happens to be the west end, at the top.  I
would like it to display with north at the top, as is standard with maps.
Do I need to change the projection (it's 1983 NAD UTM Zone 18N, if that
matters), or is there some other way to reorient the map?

Thank you so much for your help!

Thanks,
Sarah Praskievicz
Portland State University
Department of Geography

On Fri, Sep 19, 2008 at 10:31 AM, Ashley Perkins <
ashleyanneperkins@gmail.com> wrote:

>  Sarah,
>
> There is also a very useful dialogue about this error in the listserve
> archives.  I can't remember which month of the top of my head... Search for
> RCHTAB.
>
> Cheers,
> Ashley
>
>
> On Fri, Sep 19, 2008 at 9:23 AM,  wrote:
>
>> Hi Sarah,
>>
>> The problem is with your Ftable (i.e. details of stream channel
>> cross-sectional geometry): the maximum defined reach volume is less than
>> the volume of water that HSPF is simulating as being present.  I
>> recommend having a look at BASINS "technical note
>> #2" (http://www.epa.gov/waterscience/basins/docs/tecnote2.pdf) for some
>> insight into the problem, and a possible solution.  You can also build a
>> new Ftable manually if you have some representative stream
>> cross-sectional geometry data to work with.
>>
>>
>>
>>
>>
>>             "Sarah
>>             Praskievicz"
>>             >             com>                     "Private list for BASINS users"
>>                                      
>>             09/19/2008 12:05                                        cc
>>             PM
>>                                                                Subject
>>                                      [basinsinfo] WinHSPF error 341
>>              Please respond
>>                    to
>>              "Private list
>>                for BASINS
>>                  users"
>>             >                s.epa.gov>
>>
>>
>>
>>
>>
>>
>> Hello,
>>
>> I am a new BASINS user, attempting to use WinHSPF to model the hydrology
>> of the Tualatin River Basin in Oregon.  My eventual goal, part of my
>> thesis work, is to simulate changes in flow, sediments, and nutrients
>> resulting from climate change and urban development in the basin.
>> However, I am unable to get results for the baseline flow because I
>> cannot get the model to run.  I consistently get the following error:
>>
>> ERROR/WARNING ID:   341   6
>> *
>>  *
>> *
>>  *  DATE/TIME: 1972/ 1/ 8  3: 0
>> *
>>  *
>> *
>>  *  RCHRES:    16
>> *
>>  *
>> *
>>  *  The volume of water in this reach/mixed reservoir is greater than
>> the value     *
>>  *  in the "volume" column of the last row of RCHTAB().  To continue the
>> *
>>  *  simulation the table has been extrapolated, based on information
>> contained      *
>>  *  in the last two rows.  This will usually result in some loss of
>> accuracy.       *
>>  *  If depth is being calculated it will also cause an error condition.
>> *
>>  *  Relevant data are:
>> *
>>  *
>> *
>>  *  NROWS         V1         V2        VOL
>> *
>>  *      8 2.8084E+09 7.7906E+09 8.7043E+09
>> *
>>
>> I don't know what this error means or how I can fix it.  Is it possibly
>> a problem with the data I'm using, which I got through the BASINS data
>> download tool?  Or is it a problem with the way the subbasins are
>> defined (I used the automatic watershed delineation)?  Or something else
>> altogether?
>>
>> I would greatly appreciate any insight on the nature of this error and
>> how it might be resolved.
>>
>> Thanks,
>> Sarah Praskievicz
>> Portland State University
>> ------------------------------------------
>> You are currently subscribed to the basinsinfo listserver.
>>
>> To unsubscribe, send the words unsubscribe basinsinfo to
>> lyris@lists.epa.gov
>> OR:
>> Use the listserver's web interface at
>> https://lists.epa.gov/cgi-bin/lyris.pl to manage your
>> subscription.
>> OR
>> Contact the basinsinfo listserver owner at
>> basinsinfo-Owner@lists.epa.gov
>> ------------------------------------------
>>
>>
>> ------------------------------------------
>> You are currently subscribed to the basinsinfo listserver.
>>
>> To unsubscribe, send the words unsubscribe basinsinfo to
>> lyris@lists.epa.gov
>> OR:
>> Use the listserver's web interface at
>> https://lists.epa.gov/cgi-bin/lyris.pl to manage your
>> subscription.
>> OR
>> Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov
>> ------------------------------------------
>>
>
>  ------------------------------------------
> You are currently subscribed to the basinsinfo listserver.
>
> To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov
> OR:
> Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl 
to manage your
> subscription.
> OR
> Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov
> ------------------------------------------
>
>

------=_Part_21271_21188526.1222446356190
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Content-Disposition: inline


Hello everyone,


 


Thanks to Jim and Ashley for your help.  I have tried editing the 
FTable, but unfortunately I am still getting the same error 341.  Here is 
the default FTable for the reach that is causing the problem, automatically 
calculated by WinHSPF using the standard method:



 


Depth (ft)  Area (acres)  Volume (acre-ft)  Outflow1 
(ft3/s) 

0 102.4729 0 0
0.356077 103.2412 36.62505 5
.059397
3.56077 110.1559 378.5612 233.6527
4.451 112.0
767 477.4803 338.6457
5.5637 337.1892 849.9993 431.0
231

6.6764 341.9909 1227.861 787.418
114.6122 807.7701 6
3278.05 305059.1
222.548 1273.549 175602.5 1222056


As I now understand it, the problem is that the total of the values in 
column three (the maximum reach volume) is less than the total of 
the values in column four (the volume of water in the reach).  I 
tried manually editing the values so those in column three are greater than 
those in column four (in common units), but I keep getting the same error: 
"The volume of water in this reach/mixed reservoir is greater than the 
value in the "volume" column of the last row of RCHTAB()."  
What am I doing wrong?



 


One more question.  When I view the watershed map in 
BASINS, it is oriented with the upstream end, which happens to be the west end, 
at the top.  I would like it to display with north at the top, as is 
standard with maps.  Do I need to change the projection (it's 1983 NAD 
UTM Zone 18N, if that matters), or is there some other way to reorient the 
map?



 


Thank you so much for your help!


 


Thanks,


Sarah Praskievicz


Portland State University


Department of Geography



On Fri, Sep 19, 2008 at 10:31 AM, Ashley Perkins <ashleyanneperkins@gmail.com> wrote:






Sarah, 


 


There is also a very useful dialogue about this error in the 
listserve archives.  I can't remember which month of the top of my 
head... Search for RCHTAB.  


 


Cheers,


Ashley








 


 


On Fri, Sep 19, 2008 at 9:23 AM, <Carleton.Jim@epamail.epa.gov> wrote:


Hi Sarah,

The problem is with your 
Ftable (i.e. details of stream channel
cross-sectional geometry): the 
maximum defined reach volume is less than

the volume of water that HSPF is simulating as being present. 
 I
recommend having a look at BASINS "technical note
#2" 
(http://www.epa.gov/waterscience/basins/docs/tecnote2.pdf) 
for some

insight into the problem, and a possible solution.  You can also build 
a
new Ftable manually if you have some representative 
stream
cross-sectional geometry data to work 
with.





            
"Sarah

            Praskievicz"
    
        <spraskie@gmail.         
                      
         To
          
  com>                   
  "Private list for BASINS users"
        
                      
       <basinsinfo@lists.epa.gov>

            09/19/2008 12:05       
                      
           cc
        
    PM
                
                      
                      
   Subject
                
                    
 [basinsinfo] WinHSPF error 341

             Please respond
    
               to
    
         "Private list
      
         for BASINS
        
         users"
        
    <basinsinfo@list
            
   s.epa.gov>













Hello,

I am a new BASINS user, attempting 
to use WinHSPF to model the hydrology
of the Tualatin River Basin in Oregon. 
 My eventual goal, part of my
thesis work, is to simulate changes in 
flow, sediments, and nutrients

resulting from climate change and urban development in the basin.
However, I 
am unable to get results for the baseline flow because I
cannot get the 
model to run.  I consistently get the following 
error:

ERROR/WARNING ID:   341   6

*
 *
*
 *  DATE/TIME: 1972/ 1/ 8  3: 
0
*
 *
*
 *  RCHRES:   
 16
*
 *
*
 *  The volume of water in this 
reach/mixed reservoir is greater than
the value     *
 * 
 in the "volume" column of the last row of RCHTAB().  To 
continue the

*
 *  simulation the table has been extrapolated, based on 
information
contained      *
 *  in the last two 
rows.  This will usually result in some loss of
accuracy.     
  *
 *  If depth is being calculated it will also cause an 
error condition.

*
 *  Relevant data are:
*
 *
*
 * 
 NROWS         V1         V2 
       VOL
*
 *      8 2.8084E+09 
7.7906E+09 8.7043E+09
*

I don't know what this error means or how 
I can fix it.  Is it possibly

a problem with the data I'm using, which I got through the BASINS 
data
download tool?  Or is it a problem with the way the subbasins 
are
defined (I used the automatic watershed delineation)?  Or something 
else

altogether?

I would greatly appreciate any insight on the nature of this 
error and
how it might be resolved.

Thanks,
Sarah 
Praskievicz
Portland State 
University
------------------------------------------

You are currently subscribed to the basinsinfo listserver.

To 
unsubscribe, send the words unsubscribe basinsinfo to
lyris@lists.epa.gov
OR:
Use the listserver's web 
interface at

https://lists.epa.gov/cgi-bin/lyris.pl to manage 
your
subscription.
OR
Contact the basinsinfo listserver owner at
basinsinfo-Owner@lists.epa.gov

------------------------------------------


--------------------------
----------------
You are currently subscribed to the basinsinfo 
listserver.

To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov

OR:
Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage 
your
subscription.
OR
Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov

------------------------------------------







------------------------------------------
You are currently subscribed to the basinsinfo listserver. 

To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov
OR:
Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your 
subscription.
OR
Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov
------------------------------------------
<
br>


------=_Part_21271_21188526.1222446356190--


-----------------------------------------------------------

X-Message-Number: 34
X-lyris-Id: 174409
Date: Tue, 30 Sep 2008 16:31:06 +0000
From: Harshad Patel 
Subject: Re: ERROR/WARNING ID:   345   1

--_ebd1b403-1acd-4a54-befe-269c93f044f6_
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable


=20
Hello Everyone=2C
=20
I encounter following error. Is anyone have idea what it is means?
=20
***************************************************************************=
********* *                                                                =
                  * *  ERROR/WARNING ID:   345   1                         =
                            * *                                            =
                                      * *  DATE/TIME: 1996/ 2/27 20:30     =
                                                * *                        =
                                                          * *  RCHRES:   30=
0                                                                   * *    =
                                                                           =
   * *  The bed storage of sediment size fraction     2 is empty.          =
             * *  (1- sand 2- silt 3- clay)                                =
                       * *                                                 =
                                 * ****************************************=
********************************************
=20
Thanks in advance
Harshad Patel
_________________________________________________________________


--_ebd1b403-1acd-4a54-befe-269c93f044f6_
Content-Type: text/html; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable






 =3B

Hello Everyone=2C

 =3B

I encounter following error. Is anyone have idea what it is means?

 =3B

***************************************************************************=
*********
 =3B* =3B =3B =3B =3B =3B =3B =
=3B =3B =3B =3B =3B =3B =3B =3B =3B =3B=
 =3B =3B =3B =3B =3B =3B =3B =3B =3B&nb=
sp=3B =3B =3B =3B =3B =3B =3B =3B =3B =
=3B =3B =3B =3B =3B =3B =3B =3B =3B =3B=
 =3B =3B =3B =3B =3B =3B =3B =3B =3B&nb=
sp=3B =3B =3B =3B =3B =3B =3B =3B =3B =
=3B =3B =3B =3B =3B =3B =3B =3B =3B =3B=
 =3B =3B =3B =3B =3B =3B =3B =3B =3B *<=
BR> =3B* =3B ERROR/WARNING ID: =3B =3B 345 =3B =3B =
1 =3B =3B =3B =3B =3B =3B =3B =3B =3B&n=
bsp=3B =3B =3B =3B =3B =3B =3B =3B =3B =
=3B =3B =3B =3B =3B =3B =3B =3B =3B =3B=
 =3B =3B =3B =3B =3B =3B =3B =3B =3B&nb=
sp=3B =3B =3B =3B =3B =3B =3B =3B =3B =
=3B =3B =3B =3B =3B =3B *
 =3B* =3B =3B&=
nbsp=3B =3B =3B =3B =3B =3B =3B =3B =3B&nbs=
p=3B =3B =3B =3B =3B =3B =3B =3B =3B =
=3B =3B =3B =3B =3B =3B =3B =3B =3B =3B=
 =3B =3B =3B =3B =3B =3B =3B =3B =3B&nb=
sp=3B =3B =3B =3B =3B =3B =3B =3B =3B =
=3B =3B =3B =3B =3B =3B =3B =3B =3B =3B=
 =3B =3B =3B =3B =3B =3B =3B =3B =3B&nb=
sp=3B =3B =3B =3B =3B =3B =3B =3B =3B =
=3B =3B =3B =3B =3B *
 =3B* =3B DATE/TIME: 1996/=
 2/27 20:30 =3B =3B =3B =3B =3B =3B =3B =3B=
 =3B =3B =3B =3B =3B =3B =3B =3B =3B&nb=
sp=3B =3B =3B =3B =3B =3B =3B =3B =3B =
=3B =3B =3B =3B =3B =3B =3B =3B =3B =3B=
 =3B =3B =3B =3B =3B =3B =3B =3B =3B&nb=
sp=3B =3B =3B =3B =3B =3B =3B *
 =3B* =
=3B =3B =3B =3B =3B =3B =3B =3B =3B =3B=
 =3B =3B =3B =3B =3B =3B =3B =3B =3B&nb=
sp=3B =3B =3B =3B =3B =3B =3B =3B =3B =
=3B =3B =3B =3B =3B =3B =3B =3B =3B =3B=
 =3B =3B =3B =3B =3B =3B =3B =3B =3B&nb=
sp=3B =3B =3B =3B =3B =3B =3B =3B =3B =
=3B =3B =3B =3B =3B =3B =3B =3B =3B =3B=
 =3B =3B =3B =3B =3B =3B =3B =3B =3B&nb=
sp=3B =3B =3B =3B =3B =3B *
 =3B* =3B RCHRES=
: =3B =3B 300 =3B =3B =3B =3B =3B =3B =
=3B =3B =3B =3B =3B =3B =3B =3B =3B =3B=
 =3B =3B =3B =3B =3B =3B =3B =3B =3B&nb=
sp=3B =3B =3B =3B =3B =3B =3B =3B =3B =
=3B =3B =3B =3B =3B =3B =3B =3B =3B =3B=
 =3B =3B =3B =3B =3B =3B =3B =3B =3B&nb=
sp=3B =3B =3B =3B =3B =3B =3B =3B =3B =
=3B =3B =3B =3B *
 =3B* =3B =3B =3B =3B&=
nbsp=3B =3B =3B =3B =3B =3B =3B =3B =3B&nbs=
p=3B =3B =3B =3B =3B =3B =3B =3B =3B =
=3B =3B =3B =3B =3B =3B =3B =3B =3B =3B=
 =3B =3B =3B =3B =3B =3B =3B =3B =3B&nb=
sp=3B =3B =3B =3B =3B =3B =3B =3B =3B =
=3B =3B =3B =3B =3B =3B =3B =3B =3B =3B=
 =3B =3B =3B =3B =3B =3B =3B =3B =3B&nb=
sp=3B =3B =3B =3B =3B =3B =3B =3B =3B =
=3B =3B =3B *
 =3B* =3B The bed storage of sediment size=
 fraction =3B =3B =3B =3B 2 is empty. =3B =3B =
=3B =3B =3B =3B =3B =3B =3B =3B =3B =3B=
 =3B =3B =3B =3B =3B =3B =3B =3B =3B&nb=
sp=3B *
 =3B* =3B (1- sand 2- silt 3- clay) =3B =3B =
=3B =3B =3B =3B =3B =3B =3B =3B =3B =3B=
 =3B =3B =3B =3B =3B =3B =3B =3B =3B&nb=
sp=3B =3B =3B =3B =3B =3B =3B =3B =3B =
=3B =3B =3B =3B =3B =3B =3B =3B =3B =3B=
 =3B =3B =3B =3B =3B =3B =3B =3B =3B&nb=
sp=3B =3B =3B =3B =3B *
 =3B* =3B =3B =
=3B =3B =3B =3B =3B =3B =3B =3B =3B =3B=
 =3B =3B =3B =3B =3B =3B =3B =3B =3B&nb=
sp=3B =3B =3B =3B =3B =3B =3B =3B =3B =
=3B =3B =3B =3B =3B =3B =3B =3B =3B =3B=
 =3B =3B =3B =3B =3B =3B =3B =3B =3B&nb=
sp=3B =3B =3B =3B =3B =3B =3B =3B =3B =
=3B =3B =3B =3B =3B =3B =3B =3B =3B =3B=
 =3B =3B =3B =3B =3B =3B =3B =3B =3B&nb=
sp=3B =3B =3B =3B *
 =3B********************************=
****************************************************

 =3B

Thanks in advance


Harshad Patel

 
=

--_ebd1b403-1acd-4a54-befe-269c93f044f6_--


-----------------------------------------------------------

X-Message-Number: 35
X-lyris-Id: 174414
Date: Tue, 30 Sep 2008 18:45:06 -0000
From: "Mery Apple" 
Subject: HSPF Limitations

Hello HSPF Users,
I have been looking at the HSPF user manual and I am trying to determine if the 
algorithms in the model has any limitation in regards specifically to slope.  I 
was wondering if any of you more experienced users may be familiar with the 
limitations of HSPF or may be able to refer me to another reference which 
outlines the basis for the underlying equations (how they were developed and 
what assumptions were used).  Because the equations are primarily empirical, it 
is difficult for me to assess if the equations are applicable to extreme 
watershed conditions as found in Hawaii.  If anyone has any advice or 
suggestion I would really appreciate it.

Thanks,
Mery Apple 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
University of Hawai'i at Manoa 
Dept. of Natural Resources & Environmental Management (NREM) 
1910 East-West Road 
Sherman Lab, Room 241 
Honolulu, Hawaii 96822 
Email: mery@hawaii.edu 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~



---

END OF MESSAGES

----------------------------------------------------------