Small aperture quadrupole SQE003 , core length 50.273 inches End Pack MD-196290 R = .0604 Ohms, L = 60.7 mH, C = 12.115 nF, Q = 3.3, D = .0258 Hipot < 1.0 microA at 3KV Date of Meas. 4-19-84 Gradient probe: SQ25 Integrator: MTFIN208 Calib Date 29-FEB-1984 Reference probe: SQ58 Morgan coil: mc830314 (Rc = 1.6955 in), Integrator: NA Integral d/dx (By) dz (at x= 0); difference from reference ( SQE001 ); effective length (inches); difference from reference Current I(0) difference % difference eff. length difference 230 Amp 126.1 kG -1.63 kg -1.280 % 51.165 in -0.663 in Fit to flatcoil data as a function of x (x in inches) I(x)/I(0) = ( -2.1038 * x**1 ) ( -3.5670 * (x/R)**1 ) * 10**4 ( -3.2160 * x**2 ) ( -9.2452 * (x/R)**2 ) ( -0.0802 * x**3 ) or ( -0.3911 * (x/R)**3 ) ( -0.0577 * x**4 ) ( -0.4771 * (x/R)**4 ) [fit over range -1.95 to +1.95] Fit to flatcoil data as a function of x (x in inches) I(x)/I(0) = ( -4.6296 * x**2 ) ( -13.3090 * (x/R)**2 ) * 10**4 ( 0.4886 * x**4 ) or ( 4.0376 * (x/R)**4 ) [fit over range -1.95 to +1.95] Out-of-Spec Items Individual authorizing continued production TOP CORE PART. EDGE FLATNESS OF PACK #17 L. OUTSIDE +.004 ENDPACK #698 L. OUTSIDE +.009 TOP CORE LENGTH TOP -.001 J. HUMBERT PERPENDICULARITY OF ENDPACK #698 L. POLE +.010 R. POLE +.011 J. HUMBERT BOTTOM CORE PART. EDGE FLATNESS ENDPACK #772 L. OUTSIDE +.004 PACK #2 L. OUTSIDE +.001 ENDPACK #762 L. OUTSIDE +.002 PERPENDICULARITY OF ENDPACK #772 R. POLE +.004 J. HUMBERT General Comments on magnet: WELDED PACKS #2,3,5,7,9,10,11, & 17 ON LEFT SIDE OF BOTTOM TIE BAR. UNTORQUED 1/2 CORES AND WLD PKS #4,6,8,12,&14 ON BOTH SIDES OF BTM.TIE BAR,THEN RETRQD.GRD PKS #2-17 ON BOTH SIDES OF BTM TIEBAR.THEN GRD PKS #6&7 ON L.SIDE OF TOP TIEBAR AND PKS #6-8 ON R.SIDE OF TOP TIE BAR. Magnet measurements: Date Station Stand Operators Flatcoil: 18-JUN-1984 A3 C JH Harmonics: Tue Jun 19 11:14:58 1984 p3 A KEITH Summary prepared by NONA , 23-JUL-84 Note: Harmonics are reported from 68000 and HOST transfer to Vax; Harmonic Stand I.D. and Morgan coil I.D. are not transmitted automatically SQE003 Relative Integral d/dx (By) vs x x Data Harmonic FlatCoil Fits (inches) * 10**4 Reconstruction 4 parameter 2 parameter -2.55 -22.97 0.00 0.00 0.00 -2.40 -21.49 0.00 0.00 0.00 -2.25 -16.90 0.00 0.00 0.00 -2.10 -12.15 0.00 0.00 0.00 -1.95 -8.64 0.00 -8.37 -10.54 -1.80 -6.48 0.00 -6.78 -9.88 -1.65 -5.17 -5.86 -5.35 -8.98 -1.50 -4.14 -5.27 -4.11 -7.95 -1.35 -3.15 -3.99 -3.02 -6.82 -1.20 -2.14 -2.74 -2.09 -5.66 -1.05 -1.26 -1.67 -1.32 -4.52 -0.90 -0.54 -0.83 -0.69 -3.43 -0.75 -0.05 -0.25 -0.22 -2.45 -0.60 0.25 0.11 0.11 -1.61 -0.45 0.30 0.28 0.30 -0.92 -0.30 0.29 0.31 0.34 -0.41 -0.15 0.17 0.21 0.24 -0.10 0.00 0.00 0.00 0.00 0.00 0.15 -0.37 -0.31 -0.38 -0.10 0.30 -0.87 -0.72 -0.92 -0.41 0.45 -1.51 -1.27 -1.60 -0.91 0.60 -2.34 -1.99 -2.44 -1.60 0.75 -3.41 -2.92 -3.43 -2.44 0.90 -4.66 -4.11 -4.59 -3.42 1.05 -6.08 -5.59 -5.91 -4.50 1.20 -7.63 -7.37 -7.41 -5.65 1.35 -9.31 -9.43 -9.08 -6.81 1.50 -11.09 -11.63 -10.94 -7.94 1.65 -12.87 -12.33 -13.01 -8.98 1.80 -14.90 0.00 -15.27 -9.87 1.95 -17.85 0.00 -17.75 -10.54 2.10 -22.22 0.00 0.00 0.00 2.25 -27.77 0.00 0.00 0.00 2.40 -33.06 0.00 0.00 0.00 2.55 -35.14 0.00 0.00 0.00 SQE003 Harmonic Coefficients *10**4 n normal skew normal skew units=harmonic coil radius units=inches (1.6955 inches) 3 -1.44 2.24 -0.851E+00 0.132E+01 4 -2.13 -0.08 -0.742E+00 -0.286E-01 5 -0.18 -0.74 -0.362E-01 -0.152E+00 6 -1.81 -0.01 -0.219E+00 -0.142E-02 9 -0.02 0.07 -0.536E-03 0.172E-02 10 1.06 -0.04 0.154E-01 -0.556E-03 12 -0.53 -0.02 -0.272E-02 -0.784E-04 15 -0.04 -0.06 -0.470E-04 -0.583E-04 18 0.36 0.04 0.768E-04 0.815E-05 20 -0.33 0.02 -0.244E-04 0.139E-05 21 -0.02 0.03 -0.107E-05 0.125E-05 25 0.04 -0.03 0.187E-06 -0.162E-06 27 0.05 0.04 0.913E-07 0.699E-07 28 -0.16 0.02 -0.179E-06 0.207E-07 30 0.29 -0.03 0.112E-06 -0.985E-08 (where 2n=pole number)
Legal Notices