! Started logfile: J0733+5022_S_2006_02_14_yyk_uvs.log on Wed Jul 5 11:39:20 2006 obs J0733+5022_S_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J0733+5022_S_2006_02_14_yyk_uva.fits ! AN table 1: 222 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.848849 visibilities/baseline/integration-bin. ! Found source: J0733+5022 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2683 lines of history. ! ! Reading 33920 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0733+5022_S_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.597236 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.705 mas, bmaj=8.98 mas, bpa=18.74 degrees ! Estimated noise=1.80094 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.50369 Jy ! Component: 100 - total flux cleaned = 0.586117 Jy ! Total flux subtracted in 100 components = 0.586117 Jy ! Clean residual min=-0.016685 max=0.022869 Jy/beam ! Clean residual mean=-0.000122 rms=0.005100 Jy/beam ! Combined flux in latest and established models = 0.586117 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.586117 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.103548Jy sigma=1.844992 ! Fit after self-cal, rms=0.103277Jy sigma=1.838366 ! Inverting map and beam ! Estimated beam: bmin=2.705 mas, bmaj=8.98 mas, bpa=18.74 degrees ! Estimated noise=1.80094 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.202 mas, bmaj=9.139 mas, bpa=18.3 degrees ! Estimated noise=1.36174 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0302666 Jy ! Component: 100 - total flux cleaned = 0.0456847 Jy ! Component: 150 - total flux cleaned = 0.054365 Jy ! Component: 200 - total flux cleaned = 0.0595915 Jy ! Total flux subtracted in 200 components = 0.0595915 Jy ! Clean residual min=-0.012257 max=0.013666 Jy/beam ! Clean residual mean=-0.000195 rms=0.003252 Jy/beam ! Combined flux in latest and established models = 0.645709 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 46 components and 0.645709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093813Jy sigma=1.692352 ! Fit after self-cal, rms=0.093667Jy sigma=1.690003 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.202 x 9.139 at 18.3 degrees (North through East) ! Clean map min=-0.011876 max=0.57751 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00495 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.93 HN 0.97 KP 0.96 ! LA 1.21 MK 0.89 NL 0.93 OV 1.10 ! PT 1.03 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.994462 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.02 KP 0.97 ! LA 1.15 MK 0.98 NL 0.96 OV 1.00 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.962528 ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.01 HN 1.04 KP 0.97 ! LA 0.94 MK 1.12 NL 1.04 OV 1.03 ! PT 1.08 SC 1.03 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.0461 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.99 HN 0.94 KP 0.89 ! LA 0.80 MK 1.12 NL 0.98 OV 0.85 ! PT 0.94 SC 1.12 ! ! ! Fit before self-cal, rms=0.093667Jy sigma=1.690003 ! Fit after self-cal, rms=0.067137Jy sigma=1.239171 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067137Jy sigma=1.239171 ! Fit after self-cal, rms=0.067137Jy sigma=1.239093 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.252 mas, bmaj=9.134 mas, bpa=18.07 degrees ! Estimated noise=1.35436 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000906675 Jy ! Component: 100 - total flux cleaned = -0.000798233 Jy ! Component: 150 - total flux cleaned = -0.000713472 Jy ! Component: 200 - total flux cleaned = -0.000716618 Jy ! Total flux subtracted in 200 components = -0.000716618 Jy ! Clean residual min=-0.005298 max=0.005803 Jy/beam ! Clean residual mean=0.000013 rms=0.001387 Jy/beam ! Combined flux in latest and established models = 0.644992 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 59 components and 0.644992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066829Jy sigma=1.231192 ! Fit after self-cal, rms=0.066767Jy sigma=1.230447 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066767Jy sigma=1.230447 ! Fit after self-cal, rms=0.065032Jy sigma=1.198299 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179379 Jy ! Component: 100 - total flux cleaned = 0.000433263 Jy ! Component: 150 - total flux cleaned = 0.000538755 Jy ! Component: 200 - total flux cleaned = 0.000633421 Jy ! Total flux subtracted in 200 components = 0.000633421 Jy ! Clean residual min=-0.005142 max=0.005331 Jy/beam ! Clean residual mean=0.000014 rms=0.001338 Jy/beam ! Combined flux in latest and established models = 0.645626 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 65 components and 0.645625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064959Jy sigma=1.196554 ! Fit after self-cal, rms=0.064820Jy sigma=1.194626 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.252 x 9.134 at 18.07 degrees (North through East) ! Clean map min=-0.0050255 max=0.57797 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064820Jy sigma=1.194626 ! Fit after self-cal, rms=0.054181Jy sigma=0.972415 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054181Jy sigma=0.972415 ! Fit after self-cal, rms=0.054166Jy sigma=0.972294 ! Inverting map and beam ! Estimated beam: bmin=3.259 mas, bmaj=9.114 mas, bpa=17.97 degrees ! Estimated noise=1.35217 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000787577 Jy ! Component: 100 - total flux cleaned = 0.000985019 Jy ! Component: 150 - total flux cleaned = 0.00105819 Jy ! Component: 200 - total flux cleaned = 0.00108922 Jy ! Total flux subtracted in 200 components = 0.00108922 Jy ! Clean residual min=-0.004551 max=0.004807 Jy/beam ! Clean residual mean=0.000024 rms=0.001284 Jy/beam ! Combined flux in latest and established models = 0.646715 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 72 components and 0.646715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054098Jy sigma=0.970738 ! Fit after self-cal, rms=0.054088Jy sigma=0.970636 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054088Jy sigma=0.970636 ! Fit after self-cal, rms=0.051057Jy sigma=0.929416 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051057Jy sigma=0.929416 ! Fit after self-cal, rms=0.051059Jy sigma=0.929424 ! Inverting map and beam ! Estimated beam: bmin=3.262 mas, bmaj=9.107 mas, bpa=17.94 degrees ! Estimated noise=1.35276 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000340612 Jy ! Component: 100 - total flux cleaned = 0.000551293 Jy ! Component: 150 - total flux cleaned = 0.000630936 Jy ! Component: 200 - total flux cleaned = 0.000706316 Jy ! Total flux subtracted in 200 components = 0.000706316 Jy ! Clean residual min=-0.004338 max=0.004777 Jy/beam ! Clean residual mean=0.000026 rms=0.001262 Jy/beam ! Combined flux in latest and established models = 0.647421 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 76 components and 0.647421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051030Jy sigma=0.928793 ! Fit after self-cal, rms=0.051027Jy sigma=0.928760 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.122 mas, bmaj=10.47 mas, bpa=11.66 degrees ! Estimated noise=1.72072 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000478041 Jy ! Component: 100 - total flux cleaned = 0.000667594 Jy ! Component: 150 - total flux cleaned = 0.000775123 Jy ! Component: 200 - total flux cleaned = 0.000841188 Jy ! Total flux subtracted in 200 components = 0.000841188 Jy ! Clean residual min=-0.005073 max=0.006238 Jy/beam ! Clean residual mean=0.000051 rms=0.001600 Jy/beam ! Combined flux in latest and established models = 0.648262 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 86 components and 0.648262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051053Jy sigma=0.929312 ! Fit after self-cal, rms=0.051043Jy sigma=0.929170 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.722 mas, bmaj=8.956 mas, bpa=18.57 degrees ! Estimated noise=1.77312 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.495745 Jy ! Component: 100 - total flux cleaned = 0.57848 Jy ! Component: 150 - total flux cleaned = 0.608724 Jy ! Component: 200 - total flux cleaned = 0.624111 Jy ! Total flux subtracted in 200 components = 0.624111 Jy ! Clean residual min=-0.006691 max=0.006727 Jy/beam ! Clean residual mean=-0.000005 rms=0.001951 Jy/beam ! Combined flux in latest and established models = 0.624111 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.624111 Jy ! Inverting map and beam ! Estimated beam: bmin=3.262 mas, bmaj=9.107 mas, bpa=17.94 degrees ! Estimated noise=1.35276 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109422 Jy ! Component: 100 - total flux cleaned = 0.014578 Jy ! Component: 150 - total flux cleaned = 0.0167978 Jy ! Component: 200 - total flux cleaned = 0.0184524 Jy ! Total flux subtracted in 200 components = 0.0184524 Jy ! Clean residual min=-0.004483 max=0.005550 Jy/beam ! Clean residual mean=0.000019 rms=0.001341 Jy/beam ! Combined flux in latest and established models = 0.642563 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 51 components and 0.642563 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.122 mas, bmaj=10.47 mas, bpa=11.66 degrees ! Estimated noise=1.72072 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00366225 Jy ! Component: 100 - total flux cleaned = 0.00427134 Jy ! Component: 150 - total flux cleaned = 0.00460281 Jy ! Component: 200 - total flux cleaned = 0.00476037 Jy ! Total flux subtracted in 200 components = 0.00476037 Jy ! Clean residual min=-0.005236 max=0.006503 Jy/beam ! Clean residual mean=0.000046 rms=0.001638 Jy/beam ! Combined flux in latest and established models = 0.647324 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 61 components and 0.647324 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.262 mas, bmaj=9.107 mas, bpa=17.94 degrees ! Estimated noise=1.35276 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000286232 Jy ! Component: 100 - total flux cleaned = -0.000147332 Jy ! Component: 150 - total flux cleaned = -2.64739e-05 Jy ! Component: 200 - total flux cleaned = 2.86827e-05 Jy ! Total flux subtracted in 200 components = 2.86827e-05 Jy ! Clean residual min=-0.004323 max=0.005073 Jy/beam ! Clean residual mean=0.000025 rms=0.001276 Jy/beam ! Combined flux in latest and established models = 0.647353 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 74 components and 0.647352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051145Jy sigma=0.930738 ! Fit after self-cal, rms=0.051140Jy sigma=0.930684 wmodel J0733+5022_S_2006_02_14_yyk\_map.mod ! Writing 74 model components to file: J0733+5022_S_2006_02_14_yyk_map.mod wobs J0733+5022_S_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J0733+5022_S_2006_02_14_yyk_uvs.fits wwins J0733+5022_S_2006_02_14_yyk\_map.win ! wwins: Wrote 1 windows to J0733+5022_S_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017062 Jy ! Component: 100 - total flux cleaned = 0.00285332 Jy ! Component: 150 - total flux cleaned = 0.00354996 Jy ! Component: 200 - total flux cleaned = 0.00374331 Jy ! Component: 250 - total flux cleaned = 0.0042307 Jy ! Component: 300 - total flux cleaned = 0.00446107 Jy ! Component: 350 - total flux cleaned = 0.00462798 Jy ! Component: 400 - total flux cleaned = 0.00468257 Jy ! Component: 450 - total flux cleaned = 0.00468422 Jy ! Component: 500 - total flux cleaned = 0.00463506 Jy ! Component: 550 - total flux cleaned = 0.00463495 Jy ! Component: 600 - total flux cleaned = 0.00468106 Jy ! Component: 650 - total flux cleaned = 0.00472571 Jy ! Component: 700 - total flux cleaned = 0.0046383 Jy ! Component: 750 - total flux cleaned = 0.00472453 Jy ! Component: 800 - total flux cleaned = 0.0047665 Jy ! Component: 850 - total flux cleaned = 0.00476657 Jy ! Component: 900 - total flux cleaned = 0.00480613 Jy ! Component: 950 - total flux cleaned = 0.00480565 Jy ! Component: 1000 - total flux cleaned = 0.0048829 Jy ! Component: 1050 - total flux cleaned = 0.00507216 Jy ! Component: 1100 - total flux cleaned = 0.00510987 Jy ! Component: 1150 - total flux cleaned = 0.0053638 Jy ! Component: 1200 - total flux cleaned = 0.00550578 Jy ! Component: 1250 - total flux cleaned = 0.00567977 Jy ! Component: 1300 - total flux cleaned = 0.00574883 Jy ! Component: 1350 - total flux cleaned = 0.00588323 Jy ! Component: 1400 - total flux cleaned = 0.00598204 Jy ! Component: 1450 - total flux cleaned = 0.00614413 Jy ! Component: 1500 - total flux cleaned = 0.00627158 Jy ! Component: 1550 - total flux cleaned = 0.0063348 Jy ! Component: 1600 - total flux cleaned = 0.00654977 Jy ! Component: 1650 - total flux cleaned = 0.00667007 Jy ! Component: 1700 - total flux cleaned = 0.00675903 Jy ! Component: 1750 - total flux cleaned = 0.00684675 Jy ! Component: 1800 - total flux cleaned = 0.00704762 Jy ! Component: 1850 - total flux cleaned = 0.00713173 Jy ! Component: 1900 - total flux cleaned = 0.0072152 Jy ! Component: 1950 - total flux cleaned = 0.00732469 Jy ! Component: 2000 - total flux cleaned = 0.00740576 Jy ! Total flux subtracted in 2048 components = 0.00745882 Jy ! Clean residual min=-0.001773 max=0.001597 Jy/beam ! Clean residual mean=-0.000004 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.654811 Jy keep ! Adding 137 model components to the UV plane model. ! The established model now contains 211 components and 0.654811 Jy ![Exited script file: muppet] wmap "J0733+5022_S_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.262 x 9.107 at 17.94 degrees (North through East) ! Clean map min=-0.0038192 max=0.57878 Jy/beam ! Writing clean map to FITS file: J0733+5022_S_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.578785 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000523283 device "J0733+5022_S_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0733+5022_S_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.271232 0.271232 0.542464 1.08493 2.16985 4.33971 8.67942 17.3588 34.7177 69.4353 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.578 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.262 x 9.107 at 17.94 degrees (North through East) ! Clean map min=-0.0038192 max=0.57878 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0733+5022_S_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0733+5022_S_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0733+5022_S_2006_02_14_yyk_uvs.log closed on Wed Jul 5 11:39:45 2006