Fermi.releasenote.52.x86_64
Click here to get the file
Size
18.2 kB
-
File type
text/plain
File contents
Scientific Linux Fermi 5.2 x86_64 July 17, 2008
Please send bug reports to dawson@fnal.gov,csieh@fnal.gov
Please read the Release Notes for Scientific Linux. It is located at
SL.releasenote
Also read the Upstream Vendor release notes . They are located in
Upstream.vendor.releasenote
All of the info in the SL.releasenote is valid unless this document
states otherwise. This document only contains info that is specific
to the Fermi site. Any reference to SL.releasenote is done to emphasis
that it contains important information.
----------------------------------------------------------------------------
This is based on the rebuilding of RPMS out of SRPMS's that form Scientific
Linux. Please read this entire document before installing.
Table of contents
INSTALLATION INFO
ADDED compared to Scientific Linux 5.2
UPDATED compared to Scientific Linux 5.2
Installer modifications
/contrib
/docs
/notsupported
MISC Notes
HARDWARE SPECIFIC ISSUES
SOFTWARE ISSUES/BUGS
SUPPORT INFO
vendor ERRATA
Each has a "---" line above and below it.
_____________________________________________________________________________
INSTALLATION INFO
_____________________________________________________________________________
Installation Locations
Via NETWORK:
nfs:
linux.fnal.gov:/export/linux/slf52/x86_64/
ftp:
linux.fnal.gov /linux/slf52/x86_64
http:
linux1.fnal.gov /linux/slf52/x86_64
network install with floppy
There is no floppy install as the kernel is too big to fit on a floppy.
network install with cdrom
There is a boot.iso which is small iso image which includes all the
drivers. After download you can use cdrecord to create a cdr with this
image on it.
ftp://linux.fnal.gov/download/slf52/network.install.x86_64/boot.iso
There is a DVD image
Download and then burn the dvd iso image from
ftp://linux.fnal.gov/download/slf52/dvd.install.x86_64/
There cd images
Download and then burn the cd iso image from
ftp://linux.fnal.gov/download/slf52/cd.install.x86_64/
Installing a Xen Paravirtualized Guest
When installing a Xen Paravirtualized Guest, the location is
http://linux1.fnal.gov/linux/slf52/x86_64/sites/Fermi
-----------------------------------------------------------------------------
ADDED compared to Scientific Linux 52 x86_64
-----------------------------------------------------------------------------
*Fermi-release-notes
Made change so that /etc/redhat-release, /etc/issue and /etc/issue.net
show Scientific Linux Fermi instead of just Scientific Linux.
Clam Anti Virus
Clam Anti-Virus. Obtained from the DAG repository and rebuilt from
src.rpm. http://www.clamav.net
clamav-0.91.2-1.rf.x86_64.rpm
clamav-db-0.91.2-1.rf.x86_64.rpm
clamav-devel-0.91.2-1.rf.x86_64.rpm
clamav-milter-0.91.2-1.rf.x86_64.rpm
clamd-0.91.2-1.rf.x86_64.rpm
clamtk-2.32-1.rf.x86_64.rpm
flpr
Installed by default. This does NOT require ups/upd.
The flpr binary will reside in /usr/local/bin/
flpr-2.4-4f.9x.i386.rpm
Kerberos
For SLF 5, we no longer need Fermi's kerberos. We are only including
packages for configuring krb5.conf, as well as some utilities.
* krb5-fermi-config-2.8-1.noarch.rpm
krb5-getcert-1.9-5.slf5.noarch.rpm
OpenAFS
See SL.releasenote
Here is the procedure for installing openafs, using yum
yum install openafs-client openafs-thiscell kernel-module-openafs-`uname -r`
openafs-thiscell-FNAL-5.noarch.rpm
redhat-logos-1.1.25-1.LTS.6.noarch.rpm
This version of redhat-logo's has all of the generic changes
that were made with Scientific Linux as well as changes to make
it look like SLF.
redhat-logos-4.9.16-1.SLF.4.noarch.rpm
SLIP
Scientific Linux Inventory Project client
ocsinventory-client-0.9.9-9.noarch.rpm
upsupdbootstrap
Not installed by default.
Links from /usr/local/bin are NOT made anymore.
upsupdbootstrap-5.0-0.i386.rpm
* upsupdbootstrap-fnal-5.0-0.i386.rpm
conflicts with upsupdbootstrap-local
Installs ups/upd to /fnal/ups
* upsupdbootstrap-local-5.0-0.i386.rpm
conflicts with upsupdbootstrap-fnal
Installs ups/upd to /local/ups
yum-conf
Modified to give Fermi's rpm's a priority, as well as point to
Fermi's linux distribution servers instead of scientific linux's.
* yum-conf-52-1.SLF.noarch.rpm
*yum-conf-5x-2-4.SLF.noarch.rpm
Will keep you at 5x which is the current stable 5x release. So when
we release the next 5 release yum will automatically yum install it
except for the kernel.
yum install yum-conf-5x
yum-autoupdate-1-1.SLF.noarch.rpm
yum-autoupdate has the nightly yum cron job in it.
The nightly cron job has been modified to check the add-ons directory.
zz_dhcp_resolv-3.0.5-1.noarch.rpm
This rpm fixes that so that when your network starts, as it checks
your resolv.conf, if you have dhcp.fnal.gov, but not fnal.gov it will
put it in, so that you will have "search fnal.gov dhcp.fnal.gov" in
your /etc/resolv.conf file.
zz_lang_collate-1.0-4.noarch.rpm
Changes LANG so that sorting is done the same as 6.1 and
earlier. (ABCabc instead of AaBbCc).
Can speed up programs that sort.
zz_local_dns_cache-1.0-3.noarch.rpm
This rpm will change your machine to use a local dns cache before
looking for the standard dns servers
zz_logwatch_df-1.1-2.noarch.rpm
By default logwatch does a df -h when looking at disk usage.
This can be unwanted if you have alot of NFS mounted disks.
This rpm changes that command to be df -lP -h, which looks at
local disks only, and the output is in the POSIX output format.
zz_ntp_configure-4.2.0-6.noarch.rpm
Configure ntp for Fermi site network.
Startup script now pokes hole in the firewall for itself
One can manually change the script by editing the file
/etc/sysconfig/ntpd.fermi
zz_pine_user_domain-1.0-2.noarch.rpm
By default when a user sends mail from pine their email address
is myname@mycomputer.fnal.gov. This rpm changes it so that the
default is myname@fnal.gov by modifying the /etc/pine.conf config file.
zz_sendmail_fermi_gateway-2.0-1.noarch.rpm
This rpm is designed to send outbound sendmail e-mail through
the fermilab e-mail gateway(smtp.fnal.gov).
zz_tcp_wrappers_change-3.0-3.noarch.rpm
Disable all offsite access to common network services. Also
puts in the "DOE required login banners". If it determines that
you have already modified /etc/hosts.allow or host.deny it leaves
them alone.
Change to add perl to requires as %post uses perl
zz_tex_tweaks-1.0-1.noarch.rpm
Changes the default paper size to 8.5 x 11 vs A3
---------------------------------------------------------------------------
UPDATED compared to Scientific Linux 50 x86_64
----------------------------------------------------------------------------
OpenSSH
This is the openssh from S.L. 5.x with some patches and modifications.
The client does kerberos with both fermi's old openssh(old gssapi),
as well as generic new openssh's(new gssapi)
The server only does the kerberos with the newer versions of openssh
It does 'kerberos only' by default
It does not do cryptocard.
openssh-server is not installed by default.
openssh-4.3p2-41.slf5.x86_64.rpm
openssh-askpass-4.3p2-41.slf5.x86_64.rpm
openssh-clients-4.3p2-41.slf5.x86_64.rpm
openssh-server-4.3p2-41.slf5.x86_64.rpm
pam_krb5
This is a modified version of the pam_krb5 that comes with SL5.
This pam module has the ability to do cryptocard authentication.
pam_krb5-2.2.11-5.slf5.i386.rpm
pam_krb5-2.2.11-5.slf5.x86_64.rpm
----------------------------------------------------------------------------
Installer modifications
---------------------------------------------------------------------------
Anaconda (installer)
Changes to "defaults" from vendor installer.
Firewall is on by default.
The zz_ntp_configure-4.2.0-6 rpm pokes a hole for inbound ntp.
US/Central is default timezone. vendor default was New York.
Kerberos is on by default with a realm of FNAL.GOV . vendor default
was off.
Default install is via http. If one wishes to use nfs then type
nfs at the isolinux prompt. If one wshes to use ftp then type ftp
at the isolinux prompt.
Support for "sites" was added.
Support for workgroups was added
---------------------------------------------------------------------------
/contrib/
---------------------------------------------------------------------------
The packages in this section have been contributed by various people. They
are presented AS IS and there is no guarantee of them working. These packages
are NOT supported by us. They will only get security updates if the
contributor provides them. If you have questions about them then ask the
contributor.
To use with yum:
For one time only (prefered method)
yum --enablerepo=Fermi-contrib install <package>
To enable for all yum updates/install (including autoyum)
edit the file /etc/yum.repos.d/fermi-contrib.repo
and change the line
enabled=0
to
enabled=1
See README's in the RPMS/ directorys for specific package info.
/sites/Fermi/contrib/RPMS/
---------------------------------------------------------------------------
KNOWN LIMITATIONS/BUGS
---------------------------------------------------------------------------
The estimated time to install is not even close.
After you have picked a workgroup on the workgroup selection page and moved
to the next , you cannot go back to that page. The installer will die.
---------------------------------------------------------------------------
MISC NOTES
---------------------------------------------------------------------------
If you select "linux text" or you might want to type
"linux text noipv6"
because the install trys to do ipv6 and since there is no support
at FNAL for ipv6 it takes a long time to timeout
kickstart users might want to add the "noipv6" option to their ks.cfg file
---------------------------------------------------------------------------
SUPPORT INFO
---------------------------------------------------------------------------
Fermi site users should start with the "Fermi" specific support areas and
use the Scientific Linux next.
Scientific Linux Fermi web pages
http://www.fnal.gov/cd/unix/linux
Fermi Linux Community support mailing list
linux-users@fnal.gov
Which is archived at
http://listserv.fnal.gov/archives/linux-users.html
Scientific Linux web page
http://www.scientificlinux.org
----------------------------------------------------------------------------
SECURITY ERRATA included which was released after SL5.2
----------------------------------------------------------------------------
bind-9.3.4-6.0.2.P1.el5_2.x86_64.rpm
bind-chroot-9.3.4-6.0.2.P1.el5_2.x86_64.rpm
bind-devel-9.3.4-6.0.2.P1.el5_2.i386.rpm
bind-devel-9.3.4-6.0.2.P1.el5_2.x86_64.rpm
bind-libbind-devel-9.3.4-6.0.2.P1.el5_2.i386.rpm
bind-libbind-devel-9.3.4-6.0.2.P1.el5_2.x86_64.rpm
bind-libs-9.3.4-6.0.2.P1.el5_2.i386.rpm
bind-libs-9.3.4-6.0.2.P1.el5_2.x86_64.rpm
bind-sdb-9.3.4-6.0.2.P1.el5_2.x86_64.rpm
bind-utils-9.3.4-6.0.2.P1.el5_2.x86_64.rpm
bluez-libs-3.7-1.1.i386.rpm
bluez-libs-3.7-1.1.x86_64.rpm
bluez-libs-devel-3.7-1.1.i386.rpm
bluez-libs-devel-3.7-1.1.x86_64.rpm
bluez-utils-3.7-2.2.x86_64.rpm
bluez-utils-cups-3.7-2.2.x86_64.rpm
caching-nameserver-9.3.4-6.0.1.P1.el5_2.x86_64.rpm
Cluster_Administration-as-IN-5.2-1.noarch.rpm
Cluster_Administration-bn-IN-5.2-1.noarch.rpm
Cluster_Administration-de-DE-5.2-1.noarch.rpm
Cluster_Administration-en-US-5.2-1.noarch.rpm
Cluster_Administration-es-ES-5.2-1.noarch.rpm
Cluster_Administration-fr-FR-5.2-1.noarch.rpm
Cluster_Administration-gu-IN-5.2-1.noarch.rpm
Cluster_Administration-hi-IN-5.2-1.noarch.rpm
Cluster_Administration-it-IT-5.2-1.noarch.rpm
Cluster_Administration-ja-JP-5.2-1.noarch.rpm
Cluster_Administration-kn-IN-5.2-1.noarch.rpm
Cluster_Administration-ko-KR-5.2-1.noarch.rpm
Cluster_Administration-ml-IN-5.2-1.noarch.rpm
Cluster_Administration-mr-IN-5.2-1.noarch.rpm
Cluster_Administration-or-IN-5.2-1.noarch.rpm
Cluster_Administration-pa-IN-5.2-1.noarch.rpm
Cluster_Administration-pt-BR-5.2-1.noarch.rpm
Cluster_Administration-ru-RU-5.2-1.noarch.rpm
Cluster_Administration-si-LK-5.2-1.noarch.rpm
Cluster_Administration-ta-IN-5.2-1.noarch.rpm
Cluster_Administration-te-IN-5.2-1.noarch.rpm
Cluster_Administration-zh-CN-5.2-1.noarch.rpm
Cluster_Administration-zh-TW-5.2-1.noarch.rpm
compat-openldap-2.3.27_2.2.29-8.el5_2.4.i386.rpm
compat-openldap-2.3.27_2.2.29-8.el5_2.4.x86_64.rpm
devhelp-0.12-18.el5.i386.rpm
devhelp-0.12-18.el5.x86_64.rpm
devhelp-devel-0.12-18.el5.i386.rpm
devhelp-devel-0.12-18.el5.x86_64.rpm
finch-2.3.1-2.el5_2.i386.rpm
finch-2.3.1-2.el5_2.x86_64.rpm
finch-devel-2.3.1-2.el5_2.i386.rpm
finch-devel-2.3.1-2.el5_2.x86_64.rpm
firefox-3.0.1-1.el5.i386.rpm
firefox-3.0.1-1.el5.x86_64.rpm
gfs2-utils-0.1.44-1.el5_2.1.x86_64.rpm
Global_File_System-as-IN-5.2-1.noarch.rpm
Global_File_System-bn-IN-5.2-1.noarch.rpm
Global_File_System-de-DE-5.2-1.noarch.rpm
Global_File_System-en-US-5.2-1.noarch.rpm
Global_File_System-es-ES-5.2-1.noarch.rpm
Global_File_System-fr-FR-5.2-1.noarch.rpm
Global_File_System-gu-IN-5.2-1.noarch.rpm
Global_File_System-hi-IN-5.2-1.noarch.rpm
Global_File_System-it-IT-5.2-1.noarch.rpm
Global_File_System-ja-JP-5.2-1.noarch.rpm
Global_File_System-kn-IN-5.2-1.noarch.rpm
Global_File_System-ko-KR-5.2-1.noarch.rpm
Global_File_System-ml-IN-5.2-1.noarch.rpm
Global_File_System-mr-IN-5.2-1.noarch.rpm
Global_File_System-or-IN-5.2-1.noarch.rpm
Global_File_System-pa-IN-5.2-1.noarch.rpm
Global_File_System-pt-BR-5.2-1.noarch.rpm
Global_File_System-ru-RU-5.2-1.noarch.rpm
Global_File_System-si-LK-5.2-1.noarch.rpm
Global_File_System-ta-IN-5.2-1.noarch.rpm
Global_File_System-te-IN-5.2-1.noarch.rpm
Global_File_System-zh-CN-5.2-1.noarch.rpm
Global_File_System-zh-TW-5.2-1.noarch.rpm
java-1.5.0-sun-compat-1.5.0.16-1jpp.noarch.rpm
jdk-1.5.0_16-fcs.i586.rpm
jdk-1.5.0_16-fcs.x86_64.rpm
k3b-0.12.17-3.el5.x86_64.rpm
kdebindings-3.5.4-6.el5.src.rpm
kdebindings-3.5.4-6.el5.x86_64.rpm
kdebindings-devel-3.5.4-6.el5.i386.rpm
kdebindings-devel-3.5.4-6.el5.x86_64.rpm
libpurple-2.3.1-2.el5_2.i386.rpm
libpurple-2.3.1-2.el5_2.x86_64.rpm
libpurple-devel-2.3.1-2.el5_2.i386.rpm
libpurple-devel-2.3.1-2.el5_2.x86_64.rpm
libpurple-perl-2.3.1-2.el5_2.x86_64.rpm
libpurple-tcl-2.3.1-2.el5_2.x86_64.rpm
libsdp-1.1.99-10.el5_2.x86_64.rpm
man-pages-2.39-12.el5.noarch.rpm
nspr-4.7.1-1.el5.i386.rpm
nspr-4.7.1-1.el5.x86_64.rpm
nspr-devel-4.7.1-1.el5.i386.rpm
nspr-devel-4.7.1-1.el5.x86_64.rpm
nss-3.12.0.3-1.el5.i386.rpm
nss-3.12.0.3-1.el5.x86_64.rpm
nss-devel-3.12.0.3-1.el5.i386.rpm
nss-devel-3.12.0.3-1.el5.x86_64.rpm
nss-pkcs11-devel-3.12.0.3-1.el5.i386.rpm
nss-pkcs11-devel-3.12.0.3-1.el5.x86_64.rpm
nss-tools-3.12.0.3-1.el5.x86_64.rpm
openib-mstflint-1.3-1.el5_2.x86_64.rpm
openib-perftest-1.2-11.el5_2.x86_64.rpm
openib-tvflash-0.9.2-8.el5_2.x86_64.rpm
openldap-2.3.27-8.el5_2.4.i386.rpm
openldap-2.3.27-8.el5_2.4.x86_64.rpm
openldap-clients-2.3.27-8.el5_2.4.x86_64.rpm
openldap-devel-2.3.27-8.el5_2.4.i386.rpm
openldap-devel-2.3.27-8.el5_2.4.x86_64.rpm
openldap-servers-2.3.27-8.el5_2.4.x86_64.rpm
openldap-servers-sql-2.3.27-8.el5_2.4.x86_64.rpm
php-5.1.6-20.el5_2.1.x86_64.rpm
php-bcmath-5.1.6-20.el5_2.1.x86_64.rpm
php-cli-5.1.6-20.el5_2.1.x86_64.rpm
php-common-5.1.6-20.el5_2.1.x86_64.rpm
php-dba-5.1.6-20.el5_2.1.x86_64.rpm
php-devel-5.1.6-20.el5_2.1.x86_64.rpm
php-gd-5.1.6-20.el5_2.1.x86_64.rpm
php-imap-5.1.6-20.el5_2.1.x86_64.rpm
php-ldap-5.1.6-20.el5_2.1.x86_64.rpm
php-mbstring-5.1.6-20.el5_2.1.x86_64.rpm
php-mysql-5.1.6-20.el5_2.1.x86_64.rpm
php-ncurses-5.1.6-20.el5_2.1.x86_64.rpm
php-odbc-5.1.6-20.el5_2.1.x86_64.rpm
php-pdo-5.1.6-20.el5_2.1.x86_64.rpm
php-pgsql-5.1.6-20.el5_2.1.x86_64.rpm
php-snmp-5.1.6-20.el5_2.1.x86_64.rpm
php-soap-5.1.6-20.el5_2.1.x86_64.rpm
php-xml-5.1.6-20.el5_2.1.x86_64.rpm
php-xmlrpc-5.1.6-20.el5_2.1.x86_64.rpm
pidgin-2.3.1-2.el5_2.i386.rpm
pidgin-2.3.1-2.el5_2.x86_64.rpm
pidgin-devel-2.3.1-2.el5_2.i386.rpm
pidgin-devel-2.3.1-2.el5_2.x86_64.rpm
pidgin-perl-2.3.1-2.el5_2.x86_64.rpm
ruby-1.8.5-5.el5_2.3.x86_64.rpm
ruby-devel-1.8.5-5.el5_2.3.i386.rpm
ruby-devel-1.8.5-5.el5_2.3.x86_64.rpm
ruby-docs-1.8.5-5.el5_2.3.x86_64.rpm
ruby-irb-1.8.5-5.el5_2.3.x86_64.rpm
ruby-libs-1.8.5-5.el5_2.3.i386.rpm
ruby-libs-1.8.5-5.el5_2.3.x86_64.rpm
ruby-mode-1.8.5-5.el5_2.3.x86_64.rpm
ruby-rdoc-1.8.5-5.el5_2.3.x86_64.rpm
ruby-ri-1.8.5-5.el5_2.3.x86_64.rpm
ruby-tcltk-1.8.5-5.el5_2.3.x86_64.rpm
selinux-policy-2.4.6-137.1.el5_2.noarch.rpm
selinux-policy-devel-2.4.6-137.1.el5_2.noarch.rpm
selinux-policy-mls-2.4.6-137.1.el5_2.noarch.rpm
selinux-policy-strict-2.4.6-137.1.el5_2.noarch.rpm
selinux-policy-targeted-2.4.6-137.1.el5_2.noarch.rpm
Virtualization-as-IN-5.2-11.noarch.rpm
Virtualization-bn-IN-5.2-11.noarch.rpm
Virtualization-de-DE-5.2-11.noarch.rpm
Virtualization-en-US-5.2-11.noarch.rpm
Virtualization-es-ES-5.2-11.noarch.rpm
Virtualization-fr-FR-5.2-11.noarch.rpm
Virtualization-gu-IN-5.2-11.noarch.rpm
Virtualization-hi-IN-5.2-11.noarch.rpm
Virtualization-it-IT-5.2-11.noarch.rpm
Virtualization-ja-JP-5.2-11.noarch.rpm
Virtualization-kn-IN-5.2-11.noarch.rpm
Virtualization-ko-KR-5.2-11.noarch.rpm
Virtualization-ml-IN-5.2-11.noarch.rpm
Virtualization-mr-IN-5.2-11.noarch.rpm
Virtualization-or-IN-5.2-11.noarch.rpm
Virtualization-pa-IN-5.2-11.noarch.rpm
Virtualization-pt-BR-5.2-11.noarch.rpm
Virtualization-ru-RU-5.2-11.noarch.rpm
Virtualization-si-LK-5.2-11.noarch.rpm
Virtualization-ta-IN-5.2-11.noarch.rpm
Virtualization-te-IN-5.2-11.noarch.rpm
Virtualization-zh-CN-5.2-11.noarch.rpm
Virtualization-zh-TW-5.2-11.noarch.rpm
xulrunner-1.9.0.1-1.el5.i386.rpm
xulrunner-1.9.0.1-1.el5.x86_64.rpm
xulrunner-devel-1.9.0.1-1.el5.i386.rpm
xulrunner-devel-1.9.0.1-1.el5.x86_64.rpm
xulrunner-devel-unstable-1.9.0.1-1.el5.x86_64.rpm
yelp-2.16.0-20.el5.x86_64.rpm
nspluginwrapper-0.9.91.5-22.el5.i386.rpm
nspluginwrapper-0.9.91.5-22.el5.x86_64.rpm