Compares a time with a maximum time that is defined in
DRAircraftRulesInterface and returns true if the comparison time
is greater than the max time allowed.
Compares an airspeed with a minimum airspeed that is defined in
DRAircraftRulesInterface and returns true if the comparison speed
is greater than the threshold.
This class defines some of the common methods that all Epoch Managers
need and does some of the initial communication between a epoch manager
instance and the Executive.
AbstractFilter is an abstract class for the Filter interface that provides
methods to add and remove listeners from the list of registered listeners,
and to send registered listeners a specified Filterable.
Constructor -
AcesGeomap is the object representing a particluar geomap within
the given ACES GEOMAP dataset consisting of it's name, center coords
and various line information.
This class integrates FixCleaner and RouteCleaner to
produce an XML file (for use by AcesXmlPostProcess)
which contains information on:
- what fixes to delete
- what routes to delete them from
See the source AcesXmlCleaner.java
List containing the Classes of aircraft event that the listeners
want to receive (if a aircraft event is an instance of the Class,
the listener is sent the Event).
acEvtBus -
Variable in class faa.tg.aircraft.adm.guidance.longuidance.CvsClimbMan
Allows SPW prompt if start to fail to meet the altitude rate.
AcidFilter listens for Filterable objects, checks to see if the events
are instances of HasAcid or HasBeaconCode and sends the events with a
matching aircraft ID or beacon code to listeners.
AcidListFilter is a AbstractFilter; it listens for Filterables, checks to
see if the events are for the requested Acid, and
if so sends those events to listeners registered for that Filterable.
This class contains the Aircraft Identification Status Message
which is used to notify the AtVoice as to the status of an aircraft
on a controller's frequency.
This popup is used to specify the spw preferences for when an aircraft is
selected in an InstrumentPanel such as centering on that aircraft or displaying
that aircraft's route.
This contains all the time-sorted AircraftState objects constructed
while importing non-TGF data: it is indexed by the system time value
stored in a SimulationTime object.
Implementing actionListener
If help button was pressed, embedableTextEditor opens with the sp command
document and if clear line button was pressed, clears the command textField
If the OK button is pressed, Pvd history or predictor is
updated to reflect the length that was specified by the slider
This dialog is closed no matter which button is pressed
Looks up an aircraft's departure and arrival runways and
activates (adds an effectively infinite additional cost in the algorithm
for path finding through them).
Defines an AcType (aircraft type) class: does not distinguish between the
actual aircraft type imported from the flight plan (used by Flight) and
the simulator's aircraft type equivalent that determines the flight
characteristics to use (used by Aircraft).
Constructor for an AcType that takes a String that should contain the
UFP aircraft type, followed by a slash ('/'), followed by the
navigation equipment type.
AcTypeFilter is an AbstractFilter; it listens for Filterable objects,
checks to see if the events are instances of HasAcType (they have an
associated aircraft type), and sends the events with a matching aircraft
type to the listeners that are registered for that aircraft type.
Add an alternative (equivalent) fix to this route node: returns whether
the addition was successful (will fail if the alternative fix position
is not equal to the primary fix position).
Adds the component to the specified row and col that spans across
a specified number of columns and rows with the specified filling
direction and an anchoring position.
Creates a menu item in the ECO's DRAT menu that allows a recording to be
imported into a scenario with the specified suffix to append to recorded
ACIDs.
Creates a menu item in the ECO's DRAT menu that allows a recording to be
imported into a scenario with the specified suffix to append to recorded
ACIDs.
Creates a menu item in the ECO's DRAT menu that allows a recording to be
imported into a scenario with the specified suffix to append to recorded
ACIDs.
Adds the AircraftEventListener and the Class the listener wants to receive
instances of, placing them at the end of the List (increases List size
by one).
Adds a route node and end radial to this route, and creates a
end radial segment; currently allows the end radial to be set to
null, which causes the RouteWEndRadial to behave the same as a Route.
Add a simulation event for certain types of simpilot commands that
allows delayed commands and the chaining of delayed commands for
AtTime and AtFix command types.
ADMController is the primary in-air dynamics controller class for
ADMAircraft; it supports high-fidelity guidance control using a
component guidance model.
Contains the characters that designate ADS-B equipment: the aircraft
type will be checked for an equipment code field (..."/#") to see if
the equipment code is one of the characters in this string.
AdsbMgr manages the transmission of ADS-B (Automatic Dependent
Surveillance--Broadcast) datalink messages from simulated aircraft,
containing aircraft state information, to listeners that register to
receive it.
Constructs a new AdsbMgr that adds a specified broadcaster so
that an AdsbMgr that immediately starts sending messages to a
multicast InetAddress can be started by an OptionalClasses.xml entry.
A creator class that enables dynamic creation of the AfMessage
Instances of this class are used to create instances of the AfMessage
See the source: AfCreator.java
This class contains the names of the elements and attributes found
in an AIDL XML file that comes from the aidl namespace
See the source
AidlElementNames.java
AircraftEventListenerList contains two lists; one contains objects of
type AircraftEventListener and the other contains the Class of aircraft event
that the AircraftEventListener wants to receive instances of.
AircraftFactoryInterface is the interface that each AircraftFactory
user should use to manipulate any concrete implementation of a
AircraftFactory object.
AircraftFieldDurationFactory is a FilterableListener and AbstractFilter;
it listens for AircraftState objects, and sends durations for periods of
time where the fields selected have the same set of values.
Constructs a class that constructs duration information for AircraftState
information by sets of fields that have the same values, for all
duration lengths with no fields currently specified.
Constructs a class that filters second-by-second aircraft objects by
ACID or beacon code; specifies String containing space-separated ACIDs
and or beacon codes.
Used to transmit information about a group
Has the same information as ADM Aircraft Transfer Medium but
also contains information about a group
See the source
AircraftGroupTransferMedium.java
This object represent the squared difference between the heading of each
aircraft in a sector and the direction of the major axis(route) in a
sector, weighted by sector aspect ratio.
This object represent Aircraft Speed Change - difference between
Desired Indicated Air Speed and Indicated Air Speed
See the source AircraftSpeedChange.java
This object represent number of aircraft pairs with 3-D Euclidian distance between
according to the 'milesBetweenLow'-'milesBetweenHigh' parameters in nautical miles.
This object represent conflict predicted - number of aircraft pairs predicted to be in conflict
within next 20 min whose lateral separation distance between 'lateralLower' - 'lateralHigher'
in nautical miles, and vertical ('vertical') separation less than above/below ('vertSepHigh'/'vertSepLow')
29000 feet.
This object check is the aircraft within some distance to sector boundary - Polygon
(result of faa.tg.dynamicDensity.math.sector.GeoSectorBoundaryOnCertainAltitude calculations).
The base class which extracting different Types of Aircraft from FZ, UZ, and DZ messages,
and insert this information into table (User - TMUUSER, table - AIRTYPE_TMU).
AircraftWeight represents the Weight of the Aircraft by dividing
weight into three different kinds of weight:
empty weightfuel weightpayload weight
See section 6 of the Detailed Design Document for a discussion
of design issues.
AirportFilter is a AbstractFilter; it listens for Filterables,
checks to see if the events are from the requested airport, and
if so sends those events to listeners registered for that airport.
This adapter class for faa.tg.nas.airport.Airport enables functionality
need for ground movement with out extending airport, due to serialization issues.
Issue a Alarm Search command on the bus
This allows the bus master to find all of the unique
ROM codes of the devices on the bus that have an
alarm set.
Whether duplicate events from among the sub-filters are allowed to
be sent to listeners; if not this filter will check for duplicates
to prevent them from being sent.
Sets whether duplicate events from among the sub-filters are allowed
to be sent to listeners; if not this filter will check for duplicates
to prevent them from being sent.
AltFilter is an AbstractFilter; it listens for Filterables,
checks to see if the events can be differentiated by altitude, and then
sends the events to listeners registered for those coordinates.
This command is given to an aircraft currently changing altitude to
specify a altitude rate to climb/descend at, or immediately after an
altitude command to specify its altitude rate.
Constructor - creates a text field and a drop down of the Unit_type
of the given class and specifies whether negative numbers are allowed
in the field value.
This object extends a Rti13NullFederateAmbassador - it is used
whenever the RTI needs to tell a federate something via the
call back methods implemented within.
The AmmMessageCenter handles messages to and from an Airport Management
Module (AMM), an automated system managing entry into a Self-Controlled
Area (SCA) and setting the aircraft sequence for landing, for studies
involving the Small Aircraft Transportation System (SATS).
The restriction is "at or above" as in a STAR route: an attempt should
be made to capture the altitude, but it is not a failure if the
aircraft does not descend all the way to the target altitude.
Append the specified maneuver to this speed-altitude profile; if
the specified maneuver has follow-on maneuvers they will also be
included in this profile.
A class which will allow a user to select the start date
and the end date for which he would like to have data pulled from the database for
arrivals and departures from a specified airport.
Select ASDI data from DB (according to Dates, MSG type, and Facility Identifiers)
into ASDI XML original format file, and then compress that file into zip format.
List of ASDI MSG Facility Identifires ('sourceFacility' Attribute of 'asdiMessage')
'KZAB' Albuquerque Center 'KMES' Memphis Tracon (SMA TZ only)
'KZBW' Boston Center 'KN90' New York TRACON (NAS TZ only)
'KZOB' Cleveland Center 'KOOA' ODAPS Oakland (AF, AZ, DZ, FZ, RZ, UZ only)
'KZDV' Denver Center 'KPHL' Philadelphia TRACON (TZ only)
'PZAN' Anchorage Center 'PZUA' Guam
'PZAN' Anchorage Center 'PTPA' Tampa
'KZFW' Fort Worth Center 'KA80' Atlanta TRACON (NAS TZ only)
'KZAU' Chicago Center 'KNCT' Northern Cal TRACON (NAS TZ only)
'KZHU' Houston Center 'KONY' ODAPS New York (AF, AZ, DZ, FZ, RZ, UZ only)
'KZID' Indianapolis Center 'KPCT' Potomac TRACON (NAS TZ only) (No data)
'KZJX' Jacksonville Center 'ETMS' TO message generated by ETMS
'KZKC' Kansas City Center 'KMSP' Minneapolis TRACON (NAS TZ only)
'KZLA' Los Angeles Center 'KSCT' Southern California TRACON (NAS TZ only)
'KZME' Memphis Center 'YOWT' CANADA OTHER
'KZNY' New York Center 'CCZX' GANDER
'KZOA' Oakland Center 'CCZM' MONCTON
'KZMP' Minneapolis Center 'CCZU' MONTREAL
'PZHN' Honolulu, Hawaii (NAS TZ only) 'CCZY' TORONTO
'KZMA' Miami Center 'CCZW' WINNIPEG
'KZSE' Seattle Center 'CCZE' EDMONTON
'KZTL' Atlanta Center 'CCZV' VANCOUVER
'KZLC' Salt Lake Center 'LLON' LONDON
'PZLB' American Samoa (No data) 'KA8S' Atlanta TRACON (SMA TZ only)
'KZDC' Washington (D.C.) Center 'KF9S' Boston TRACON (SMA TZ only)
'ETMS' RT message generated by ETMS 'KC9S' Chicago TRACON (SMA TZ only)
'TZSU' San Juan, Puerto Rico 'KCLS' Charlotte TRACON (SMA TZ only)
'KF90' Boston TRACON (TZ only) 'KDFS' DallasFt.Worth TRACON (SMA TZ only)
'KCVG' Cincinnati TRACON (TZ only) 'KDTS' Detroit TRACON (SMA TZ only)
'KDEN' Denver TRACON (NAS TZ only) 'KSDS' Louisville TRACON (SMA TZ only)
'KDFW' Dallas/Fort Worth TRACON (NAS TZ only) 'KMSS' Minneapolis TRACON (SMA TZ only)
'KC93' Chicago TRACON (TZ only) 'KN9S' New York TRACON (SMA TZ only)
'KIND' Indianapolis TRACON (TZ only) 'KPHS' Philadelphia TRACON (SMA TZ only)
'KSDF' Louisville TRACON (TZ only) 'KPIS' Pittsburgh TRACON (SMA TZ only)
'KMCO' Orlando TRACON (TZ only) 'KGTS' St.Louis TRACON (SMA TZ only)
'KGTW' Gateway (St.Louis) TRACON (NAS TZ only) 'KPHX' Phoenix TRACON (TZ only)
A class which read a Track.xml to set the start date and the end date
and a list of acids for which he would like to have data pulled from the database in
order to build a Fpx file from.
The Class binds together a AsdiServiceFileData with a AsdiServer, the main
provides a binding of a TmfLiveFeed with a TmfServer to prodvide a TMF object server
Usage: java faa.tg.asdi.AsdiServiceLiveFeed -a 1
The Class binds together a AsdiFeedConnectLive with a AsdiServer, the main
provides a binding of a TmfLiveFeed with a TmfServer to prodvide a TMF object server
see: http://www.fly.faa.gov/ASDI/asdi.html
Usage: java faa.tg.asdi.AsdiServiceLiveFeed -a 1
AtOrAboveCrossCmd should be used as a parameter to a crossing command
to specify that the crossing fix should be crossed with an altitude
restriction of "AOA": at or above the specified altitude.
Inserts an acid into the command field based on what was currently in it
if nothing is entered prior, the acid selected in the table is entered
if the index check box is selected and a number is entered, the acid
of that index is entered.