| BOM Line |
Part Was |
Mfg |
Proposed Replacement |
Preferred or recommended alternate Mfg. |
Remarks | |
Components blessed by Ed for deployment into the ice. Changes included in DOM MB Rev 3. |
||||||
| 208 |
1812K121R Bead |
Steward |
EMI 1812-125 |
Delevan |
||
| 379 |
Bead, LI0805D121R |
Steward |
EMI 0805-120 |
Delevan |
||
| 65 | 2N7002 | Fairchild | 2N7002E | Vishay | ||
| 117 | BAS70-04 | Philips | BAS70-04 | MicroSemi | ||
| 118 | BAV103-7 | Diodes Inc | 1N5615US | MicroSemi | Slightly larger footprint than MELF http://www.microsemi.com/catalog/part.asp?id=3704 |
|
| BAV103 | Vishay | Same footprint as Diodes Inc part. |
||||
| 119 | BCX70K | Infineon | BCX70K | Vishay | ||
| 125 | DL4004MS | Diodes Inc | 1N3595US-HRDGLASS | MicroSemi | Same footprint http://www.microsemi.com/catalog/part.asp?id=3683 |
|
| 161 | NC7SZ126M5 | Fairchild | 74LVC1G126GW | Philips | no IDT, no National |
|
| 172 | SN74AHCT1G126DBV | TI | 74LVC1G126GW | Philips | no IDT, no National | |
| 173 | SN74AHCT1G14DBV | TI | 74LVC1G14GW | Philips | no IDT, no National | |
| 180 | TT1.501-KK81 | Mini-Circuits | MLP-2012 | BTTC-Beta Transformer | Low profile; Change from 1:1 to 1:1.5 impedance ratio |
|
| PT-31406 | Datatronics | High profile |
||||
| 174 | T1-6-16-KK81 | Mini-Circuits | MUB55D | Vanguard | 1:1 ratio |
|
| 176 | T3-1T-3-KK81 | Mini-Circuits | MUB510D | Vanguard | 1:2 impedance ratio |
|
Components selected for Rev 4, pending approval by 'reliability team' |
||||||
| 157 | MMBD4448HTC | Diodes Inc | BAV70 | Vishay | Low Capacitance Dual Diode |
|
| 158 | MMBD4448HTS-7 | Diodes Inc | BAV99 | Vishay | Low Capacitance Dual Diode | |
| 159 | MMBTH81 | Fairchild | BF579 | Vishay | Inferior performance |
|
| BF569 | Vishay | Untested |
||||
| 132 | FIN1017K8X
(US8) |
Fairchild | SN65LVDS1
(SOIC8) |
TI | Lower power than alternates, Change footprint |
|
| DS90LV017ATM
(SOIC8) |
National | No Philips or IDT, Change footprint | ||||
| 133 | FIN1018K8X (US8) | Fairchild | SN65LVDS2
(SOIC8) |
TI |
Lower power than alterantes, Change footprint | |
| DS90LV018ATM (SOIC8) | National | No Philips or IDT, Change footprint | ||||
| 134 | FIN1101M | Fairchild | SN65LVDS100 |
TI | Lacks gate enable -- not
suitable, no philips or IDT |
|
| DS90LV001TM | National | Same footprint |
||||
| 135 | FSTD16211MTD | Fairchild | SN74CBT16211CDGGR
|
TI |
||
| CBT16211DGG
|
Philips |
|||||
| 136 | FSTD3125QSC | Fairchild | SN74CBT3125CPWR |
TI |
||
| CBT3125D |
Philips | |||||
|
|
colored
cells indicate a particular part is preferred. |
|||||
|
|
colored
cells indicate a choice is still available. |
|||||
|
|
colored
cells indicate components may be freely substituted in the DOM MB design |
|||||
|
|
colored
cells indicate that the mixing of brands of parts is not recommended,
or forbidden |
|||||
|
|
colored
cells indicate that, though approved, for technical reasons, the option
cannot be taken. |
|||||
| Inductors
(listed in order of preference for various technicalreasons.. See notes
in last column |
||||||
| 121 | CDRH5D18-4R1 | Sumida | SPD62-472M | Delevan |
Sumida part recommended by Maxim in switcher data sheet SPD is Shielded; Slightly bigger land pattern than PM54 |
|
| P1812-392K | Delevan |
Rectangular => footprint change | ||||
| 4922-09L | Delevan |
Rectangular => footprint change | ||||
| PD54-392M | Delevan |
Unshielded, but small) | ||||
| 166 | PM54-100M | JWMiller | SPD62-103M | Delevan |
Shielded; Slightly bigger land pattern | |
| PD54-103K | Delevan |
(like JWMillerpart) | ||||
| P1812-103K | Delevan |
Rectangular => footprint change |
||||
| 4922-13L | Delevan |
Rectangular => footprint change | ||||
| 167 | PM54-221K | JWMiller | SPD73-334M |
Delevan |
Shielded; Even bigger land pattern than SPD62 |
|
| SPD62-224M | Delevan |
Shielded; Slightly bigger land
pattern than PM54 |
||||
| PD54-224K | Delevan |
like JWMillerpart | ||||
| P1812-224K | Delevan |
Rectangular => footprint change | ||||
| 4922-29L | Delevan |
Rectangular => footprint change | ||||