a principle relay circuit including an output relay and a voltage input terminal, the output relay controls a power transmitted from the voltage input terminal to a household electric appliance socket or a second current inductive timer socket; a reed relay circuit including a capacitor, a plurality of diodes, a reed relay and a resistance, and being used to receive signals from exciting transistors of a time switch circuit, and to start the output relay; a counter circuit including a DC rectifier, seven series-connected counters, and a time select switch; a holding circuit including a neon light, a photodiode, an operational amplifier, a transistor, a diode and a resistance;

a time switch circuit including three time switches, and three series-connected exciting transistors, and the time units of the three time switches are minute, ten minute and hour;

an inductive and amplification circuit including a transformer parallel-connected to a rated resistor, a set of two-stage operational amplifiers, a resistance, and a capacitor; a household electric appliance socket for connection of a household electric appliance; a second current inductive timer socket for connection of another current inductive timer socket;

the current inductive timer socket is characterized in that: the seven series-connected counters are senary, decimal, senary, decimal, decimal, senary and decimal, the holding circuit uses the neon light and the photodiode as a photocoupler whose signal is first amplified by the operational amplifier and then rectified into DC current by the diode, the DC current is partially supplied to the reed relay as power source and is partially used to drive the transistor and further to drive the reed relay, the time switch circuit includes three time switches for setting time by minute, ten-minute and hour, respectively, so as to set time accurately, such as 5 hours 38 minutes, the three series-connected transistors are capable of driving a 5-500 mA relay, the value of the rated resistor is 0.01-0.1 ohm, the rated resistor is able to sense the operation of an electric appliance with a power of 30 W-1000 W, an output of the operational amplifier is used as a power source for two circuits, part of the output of the operational amplifier passes through the diode to serve as a DC current power source of the counter circuit and return the counters to zero, and part of the output of the operational amplifier passes through the diode to serve as a power source of the reed relay, that is to say, only when the inductive and amplification circuit produces signals, the counter circuit is powered on return to zero and begins to count;

when an electric appliance is connected to the current inductive timer socket, a signal of voltage drop will be produced at both ends of the rated resistor, and then will be amplified by the operational amplifier and transmitted to the counter circuit, when the counter circuit counts to a predetermined value, the time switches will send signals to the three exciting transistors, so as to start the reed relay and the output relay, thus cutting off the power supply to the electric appliance, meanwhile, the holding circuit will keep the output relay on, thus a timing operation is finished, after that, if the user turns off a switch of the electric appliance, the holding circuit will make the output relay switch off, returning to its original state.