2008 Schedule B - Chapter 79
Section XV - Chapter 79
Zinc and Articles Thereof
Note
1. In this chapter the following expressions have the meanings hereby assigned to them:
(a). Bars and rods
Rolled, extruded, drawn or forged products, not in coils, which have a uniform
solid cross section along their whole length in the shape of circles, ovals,
rectangles (including squares), equilateral triangles or regular convex polygons
(including "flattened circles" and "modified rectangles," of which two opposite
sides are convex arcs, the other two sides being straight, of equal length and
parallel). Products with a rectangular (including square), triangular or polygonal
cross section may have corners rounded along their whole length. The thickness
of such products which have a rectangular (including "modified rectangular")
cross section exceeds one-tenth of the width. The expression also covers cast or
sintered products of the same forms and dimensions, which have been
subsequently worked after production (otherwise than by simple trimming or
descaling), provided that they have not thereby assumed the character of articles
or products of other headings.
(b). Profiles
Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform
cross section along their whole length, which do not conform to any of the
definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The
expression also covers cast or sintered products, of the same forms, which have
been subsequently worked after production (otherwise than by simple trimming
or descaling), provided that they have not thereby assumed the character of
articles or products of other headings.
(c). Wire
Rolled, extruded or drawn products, in coils, which have a uniform solid cross
section along their whole length in the shape of circles, ovals, rectangles
(including squares), equilateral triangles or regular convex polygons (including
"flattened circles" and "modified rectangles," of which two opposite sides are
convex arcs, the other two sides being straight, of equal length and parallel).
Products with a rectangular (including square), triangular or polygonal cross
section may have corners rounded along their whole length. The thickness of
such products which have a rectangular (including "modified rectangular") cross
section exceeds one-tenth of the width.
(d). Plates, sheets, strip and foil
Flat-surfaced products (other than the unwrought products of heading 7901),
coiled or not, of solid rectangular (other than square) cross section with or
without rounded corners (including "modified rectangles" of which two opposite
sides are convex arcs, the other two sides being straight, of equal length and
parallel) of a uniform thickness, which are:
- of rectangular (including square) shape with a thickness not exceeding
one-tenth of the width,
- of a shape other than rectangular or square, of any size, provided that
they do not assume the character of articles or products of other
headings.
Heading 7905 applies, inter alia, to plates, sheets, strip and foil with patterns (for
example, grooves, ribs, checkers, tears, buttons, lozenges) and to such products
which have been perforated, corrugated, polished or coated, provided that they
do not thereby assume the character of articles or products of other headings.
(e). Tubes and pipes
Hollow products, coiled or not, which have a uniform cross section with only one
enclosed void along their whole length in the shape of circles, ovals, rectangles
(including squares), equilateral triangles or regular convex polygons, and which
have a uniform wall thickness. Products with a rectangular (including square),
equilateral triangular or regular convex polygonal cross section, which may have
corners rounded along their whole length, are also to be considered as tubes and
pipes provided the inner and outer cross sections are concentric and have the
same form and orientation. Tubes and pipes of the foregoing cross sections may
be polished coated, bent, threaded, drilled, waisted, expanded, cone-shaped or
fitted with flanges, collars or rings.
Subheading Note
1. In this chapter the following expressions have the meanings hereby assigned to them:
(a). Zinc, not alloyed
Metal containing by weight at least 97.5 percent of zinc.
(b). Zinc alloys
Metallic substances in which zinc predominates by weight over each of the other
elements, provided that the total content by weight of such other elements
exceeds 2.5 percent.
(c). Zinc dust
Dust obtained by condensation of zinc vapor, consisting of spherical particles
which are finer than zinc powders. At least 80 percent by weight of the particles
pass through a sieve with 63 micrometers (microns) mesh. It must contain at
least 85 percent by weight of metallic zinc.
7901 Unwrought zinc:
Zinc, not alloyed:
7901110000 Containing by weight 99.99 percent or more of zinc kg
7901120000 Containing by weight less than 99.99 percent of zinc kg
7901200000 Zinc alloys . . . . . . . . . . . . . . . . .kg
7902000000 Zinc waste and scrap . . . . . . . . . . . . .kg
7903 Zinc dust, powders and flakes:
7903100000 Zinc dust . . . . . . . . . . . . . . . . . .kg
7903900000 Other . . . . . . . . . . . . . . . . . . . .kg
7904000000 Zinc bars, rods, profiles and wire . . . . . .kg
7905000000 Zinc plates, sheets, strip and foil . . . . . .kg
7907 Other articles of zinc:
7907001000 Articles of a type used for household, table or kitchen use;
toilet and sanitary wares; all the foregoing and parts thereof
of zinc . . . . . . . . . . . . . . . . . . .kg
7907002000 Zinc tubes, pipes and tube or pipe fittings (for example,
couplings, elbows, sleeves) . . . . . . . . .kg
7907006000 Other . . . . . . . . . . . . . . . . . . . .kg
|
|