Processing Job Log for Sequence 10001000, version 009

This is the complete and detailed record of how this sequence was processed.

The following information is also available:

Processing started (18:53:8)

Checking input files for validity (18:53:10)

-> Verifying the input files
-> FITS file fa931009_0333.1601 exists
-> FITS file ad10001000_input.cat exists
-> FITS file ft931009_0333.1601 exists
-> Calculating Observation start and end times
-> Fetching leapsec.fits from /aps/calibration
-> leapsec.fits is already present in the working directory
-> Observation begins 2.4291194E+07 = 1993-10-09 03:33:13
-> Observation ends 2.4336106E+07 = 1993-10-09 16:01:45

Determine nominal pointing (18:53:22)

-> Checking fa931009_0333.1601 for problems
-> Fetching asca_mean_1999-04-23.fits from /aps/calibration
-> stdout output from aspect

Spacecraft Euler Angles: Phi=-89.52384 Theta=115.02931 Psi=179.73671
Telescope pointing: R.A.=270.19761 Dec=-25.16032 Roll=89.61856 degrees

-> Nominal spacecraft Euler angles: Phi=-89.523837376436 Theta=115.02930949116 Psi=179.73670601958
-> Nominal telescope pointing: R.A.=270.19760567690 Dec=-25.160324785437 Roll Angle=89.618564874187
-> Galactic Coordinates: Lii=4.967831 Bii=-0.990641

Running frfread on telemetry files (18:53:37)

-> Running frfread on ft931009_0333.1601
-> stdout output from frfread4

67.9997 second gap between superframes 591 and 592
SIS0 FAST RAWY out of order time=24296063.466692 rawy=0 pha=1162
Dropping SF 908 with invalid bit rate 7
97.9997 second gap between superframes 2566 and 2567
SIS1 FAST RAWY out of order time=24302135.448258 rawy=248 pha=1048
Dropping SF 2926 with invalid bit rate 7
Dropping SF 2931 with inconsistent datamode 0/31
1.99999 second gap between superframes 3647 and 3648
116 second gap between superframes 4628 and 4629
Dropping SF 4794 with invalid bit rate 7
Dropping SF 4795 with invalid bit rate 7
Dropping SF 4797 with invalid bit rate 7
SIS0 FAST RAWY out of order time=24308343.426534 rawy=155 pha=38
SIS1 FAST RAWY out of order time=24308699.425281 rawy=177 pha=727
Dropping SF 4981 with inconsistent datamode 0/31
SIS1 FAST RAWY out of order time=24310011.420795 rawy=248 pha=642
Dropping SF 6486 with inconsistent datamode 0/5
Dropping SF 6838 with inconsistent datamode 0/31
Dropping SF 6839 with inconsistent datamode 0/31
141.999 second gap between superframes 8705 and 8706
Dropping SF 9041 with inconsistent datamode 0/31
SIS1 FAST RAWY out of order time=24325639.363545 rawy=66 pha=1181
SIS1 FAST RAWY out of order time=24325639.363545 rawy=186 pha=161
Dropping SF 9376 with inconsistent SIS mode 3/0
Dropping SF 9377 with synch code word 0 = 154 not 250
Dropping SF 9378 with synch code word 1 = 147 not 243
Dropping SF 9380 with synch code word 0 = 202 not 250
SIS1 FAST RAWY out of order time=24325675.363421 rawy=57 pha=175
SIS0 FAST RAWY out of order time=24325679.363414 rawy=209 pha=1049
SIS0 FAST RAWY out of order time=24325695.36336 rawy=116 pha=714
Dropping SF 9404 with corrupted frame indicator
Dropping SF 9405 with synch code word 0 = 58 not 250
SIS0 FAST RAWY out of order time=24325703.363332 rawy=237 pha=1261
SIS0 FAST RAWY out of order time=24325715.363291 rawy=115 pha=485
SIS0 FAST RAWY out of order time=24325715.363291 rawy=209 pha=984
Dropping SF 9414 with synch code word 1 = 147 not 243
SIS0 FAST RAWY out of order time=24325731.363236 rawy=36 pha=1223
Dropping SF 9448 with synch code word 0 = 58 not 250
SIS1 FAST RAWY out of order time=24325787.363038 rawy=220 pha=712
SIS0 FAST RAWY out of order time=24325795.363017 rawy=59 pha=1056
SIS0 FAST RAWY out of order time=24325807.362976 rawy=233 pha=631
Dropping SF 9461 with corrupted frame indicator
Dropping SF 9462 with synch code word 0 = 154 not 250
SIS0 FAST RAWY out of order time=24325819.362935 rawy=64 pha=438
SIS1 FAST RAWY out of order time=24325823.362914 rawy=104 pha=1193
Dropping SF 9469 with synch code word 0 = 249 not 250
SIS0 FAST RAWY out of order time=24325831.362894 rawy=25 pha=1047
SIS0 FAST RAWY out of order time=24325847.362839 rawy=16 pha=748
SIS0 FAST RAWY out of order time=24325847.362839 rawy=117 pha=697
SIS1 FAST RAWY out of order time=24325847.362832 rawy=40 pha=866
SIS0 FAST RAWY out of order time=24325851.362826 rawy=16 pha=1041
SIS0 FAST RAWY out of order time=24325851.362826 rawy=209 pha=1085
SIS1 FAST RAWY out of order time=24325851.362819 rawy=132 pha=1111
SIS1 FAST RAWY out of order time=24325859.362792 rawy=130 pha=169
SIS0 FAST RAWY out of order time=24325863.362785 rawy=61 pha=928
Dropping SF 9487 with synch code word 0 = 154 not 250
SIS1 FAST RAWY out of order time=24325867.362764 rawy=2 pha=1047
SIS0 FAST RAWY out of order time=24325871.362758 rawy=222 pha=1904
Dropping SF 9491 with corrupted frame indicator
Dropping SF 9492 with synch code word 0 = 122 not 250
SIS1 FAST RAWY out of order time=24325875.362737 rawy=124 pha=1170
SIS0 FAST RAWY out of order time=24325879.36273 rawy=147 pha=1125
SIS1 FAST RAWY out of order time=24325879.362724 rawy=107 pha=1097
SIS0 FAST RAWY out of order time=24325963.362445 rawy=235 pha=872
SIS1 FAST RAWY out of order time=24325963.362439 rawy=154 pha=227
SIS0 FAST RAWY out of order time=24325971.362418 rawy=121 pha=1208
Dropping SF 9543 with synch code word 1 = 147 not 243
SIS0 FAST RAWY out of order time=24325983.362378 rawy=114 pha=1104
SIS0 FAST RAWY out of order time=24325987.362364 rawy=42 pha=1052
SIS1 FAST RAWY out of order time=24325987.362357 rawy=17 pha=1216
Dropping SF 9550 which overlaps by 0.240006 seconds
SIS1 FAST RAWY out of order time=24325995.36233 rawy=11 pha=1417
SIS1 FAST RAWY out of order time=24325995.36233 rawy=169 pha=1024
Dropping SF 9555 with inconsistent SIS mode 2/3
SIS0 FAST RAWY out of order time=24326011.362282 rawy=24 pha=1286
SIS0 FAST RAWY out of order time=24326011.362282 rawy=168 pha=1294
SIS0 FAST RAWY out of order time=24326015.362269 rawy=114 pha=211
Dropping SF 9563 with corrupted frame indicator
Dropping SF 9564 with synch code word 1 = 51 not 243
SIS1 FAST RAWY out of order time=24326103.361965 rawy=40 pha=1062
SIS0 FAST RAWY out of order time=24326107.361958 rawy=145 pha=833
SIS0 FAST RAWY out of order time=24326111.361945 rawy=50 pha=776
SIS0 FAST RAWY out of order time=24326111.361945 rawy=88 pha=190
Dropping SF 9611 with synch code word 0 = 226 not 250
Dropping SF 9613 with inconsistent SIS ID
SIS1 FAST RAWY out of order time=24326123.361898 rawy=10 pha=1231
Dropping SF 9622 with synch code word 0 = 226 not 250
SIS1 FAST RAWY out of order time=24326135.361857 rawy=4 pha=1811
Dropping SF 9624 with synch code word 1 = 51 not 243
Dropping SF 9625 with synch code word 1 = 240 not 243
SIS0 FAST RAWY out of order time=24326143.361837 rawy=176 pha=67
SIS1 FAST RAWY out of order time=24326143.36183 rawy=42 pha=1185
Dropping SF 9628 with synch code word 1 = 147 not 243
SIS1 FAST RAWY out of order time=24326151.361803 rawy=37 pha=1059
SIS0 FAST RAWY out of order time=24326155.361797 rawy=124 pha=661
SIS1 FAST RAWY out of order time=24326155.36179 rawy=128 pha=1236
SIS1 FAST RAWY out of order time=24326263.361427 rawy=226 pha=1197
Dropping SF 9688 with synch code word 1 = 51 not 243
SIS1 FAST RAWY out of order time=24326267.361413 rawy=114 pha=1051
Dropping SF 9692 with corrupted frame indicator
SIS0 FAST RAWY out of order time=24326279.361379 rawy=142 pha=1817
Dropping SF 9696 with synch code word 0 = 248 not 250
SIS1 FAST RAWY out of order time=24326283.361359 rawy=13 pha=666
SIS1 FAST RAWY out of order time=24326283.361359 rawy=132 pha=1182
Dropping SF 9701 with synch code word 1 = 240 not 243
SIS1 FAST RAWY out of order time=24326295.361319 rawy=96 pha=1034
Dropping SF 9704 with synch code word 1 = 195 not 243
Dropping SF 9706 with synch code word 0 = 226 not 250
Dropping SF 9707 with corrupted frame indicator
Dropped 1st C0 read after clocking change in ft931009_0333_1601S004302M.fits
Dropped 1st C1 read after clocking change in ft931009_0333_1601S004302M.fits
Dropped 1st C0 read after clocking change in ft931009_0333_1601S103802M.fits
Dropped 1st C2 read after clocking change in ft931009_0333_1601S004302M.fits
Dropped 1st C1 read after clocking change in ft931009_0333_1601S103802M.fits
Dropped 1st C3 read after clocking change in ft931009_0333_1601S004302M.fits
Dropped 1st C2 read after clocking change in ft931009_0333_1601S103802M.fits
Dropped 1st C3 read after clocking change in ft931009_0333_1601S103802M.fits
10582 of 10625 super frames processed

-> 0% of superframes in ft931009_0333.1601 corrupted
-> Deleting the following files with NEVENTS=0

ft931009_0333_1601G200870H.fits
ft931009_0333_1601G200970M.fits
ft931009_0333_1601G201070H.fits
ft931009_0333_1601G201770H.fits
ft931009_0333_1601G201870M.fits
ft931009_0333_1601G201970H.fits
ft931009_0333_1601G202070H.fits
ft931009_0333_1601G202170H.fits
ft931009_0333_1601G202270H.fits
ft931009_0333_1601G300870H.fits
ft931009_0333_1601G300970M.fits
ft931009_0333_1601G301070H.fits
ft931009_0333_1601G301170H.fits
ft931009_0333_1601G301670H.fits
ft931009_0333_1601G301770H.fits
ft931009_0333_1601G301870M.fits
ft931009_0333_1601G301970H.fits
ft931009_0333_1601G302070H.fits
ft931009_0333_1601G302170H.fits
ft931009_0333_1601G302270H.fits
ft931009_0333_1601S001603M.fits
ft931009_0333_1601S001703H.fits
ft931009_0333_1601S002603M.fits
ft931009_0333_1601S003803M.fits
ft931009_0333_1601S004302M.fits
ft931009_0333_1601S101303M.fits
ft931009_0333_1601S101403H.fits
ft931009_0333_1601S102103M.fits
ft931009_0333_1601S103303M.fits

-> merging GTIs for s0 931009_0333.1601
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft931009_0333_1601S0HK.fits
-> Total ONTIME for s0 931009_0333.1601 = 40059.9
-> merging GTIs for s1 931009_0333.1601
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft931009_0333_1601S1HK.fits
-> Total ONTIME for s1 931009_0333.1601 = 40091.9
-> merging GTIs for g2 931009_0333.1601
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft931009_0333_1601G2HK.fits
-> Total ONTIME for g2 931009_0333.1601 = 38957.9
-> merging GTIs for g3 931009_0333.1601
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft931009_0333_1601G3HK.fits
-> Total ONTIME for g3 931009_0333.1601 = 38953.9

Merging event files from frfread (19:31:8)

-> Grouping s0 event files
-> stdout output from group_event_files

1 ft931009_0333_1601S000603H.fits 5500348
1 ft931009_0333_1601S000703H.fits 5500348
1 ft931009_0333_1601S000803H.fits 5500348
1 ft931009_0333_1601S001203H.fits 5500348
1 ft931009_0333_1601S001303H.fits 5500348
1 ft931009_0333_1601S001403H.fits 5500348
1 ft931009_0333_1601S001803H.fits 5500348
1 ft931009_0333_1601S001903H.fits 5500348
1 ft931009_0333_1601S002003H.fits 5500348
1 ft931009_0333_1601S002403H.fits 5500348
1 ft931009_0333_1601S002803H.fits 5500348
1 ft931009_0333_1601S003203H.fits 5500348
1 ft931009_0333_1601S003403H.fits 5500348
2 ft931009_0333_1601S000903M.fits 555115
2 ft931009_0333_1601S001103M.fits 555115
2 ft931009_0333_1601S001503M.fits 555115
2 ft931009_0333_1601S002103M.fits 555115
2 ft931009_0333_1601S002303M.fits 555115
2 ft931009_0333_1601S002503M.fits 555115
2 ft931009_0333_1601S002703M.fits 555115
2 ft931009_0333_1601S002903M.fits 555115
2 ft931009_0333_1601S003103M.fits 555115
2 ft931009_0333_1601S003503M.fits 555115
2 ft931009_0333_1601S003703M.fits 555115
2 ft931009_0333_1601S003903M.fits 555115
2 ft931009_0333_1601S004103M.fits 555115
3 ft931009_0333_1601S000502H.fits 253986
4 ft931009_0333_1601S000102M.fits 44544
4 ft931009_0333_1601S004202M.fits 44544
5 ft931009_0333_1601S004402M.fits 6147
5 ft931009_0333_1601S004502M.fits 6147
5 ft931009_0333_1601S004602M.fits 6147
5 ft931009_0333_1601S004702M.fits 6147
5 ft931009_0333_1601S004802M.fits 6147
5 ft931009_0333_1601S004902M.fits 6147
6 ft931009_0333_1601S000202L.fits 5337
6 ft931009_0333_1601S000402L.fits 5337
7 ft931009_0333_1601S001003M.fits 1437
7 ft931009_0333_1601S002203M.fits 1437
7 ft931009_0333_1601S003003M.fits 1437
7 ft931009_0333_1601S003603M.fits 1437
7 ft931009_0333_1601S004003M.fits 1437
8 ft931009_0333_1601S003303H.fits 1358
9 ft931009_0333_1601S000302L.fits 10

-> Creating ad10001000s000103h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  13  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 13 good fits files ...
Merging binary extension #: 1 
 1 -- ft931009_0333_1601S000603H.fits 
 2 -- ft931009_0333_1601S000703H.fits 
 3 -- ft931009_0333_1601S000803H.fits 
 4 -- ft931009_0333_1601S001203H.fits 
 5 -- ft931009_0333_1601S001303H.fits 
 6 -- ft931009_0333_1601S001403H.fits 
 7 -- ft931009_0333_1601S001803H.fits 
 8 -- ft931009_0333_1601S001903H.fits 
 9 -- ft931009_0333_1601S002003H.fits 
 10 -- ft931009_0333_1601S002403H.fits 
 11 -- ft931009_0333_1601S002803H.fits 
 12 -- ft931009_0333_1601S003203H.fits 
 13 -- ft931009_0333_1601S003403H.fits 
Merging binary extension #: 2 
 1 -- ft931009_0333_1601S000603H.fits 
 2 -- ft931009_0333_1601S000703H.fits 
 3 -- ft931009_0333_1601S000803H.fits 
 4 -- ft931009_0333_1601S001203H.fits 
 5 -- ft931009_0333_1601S001303H.fits 
 6 -- ft931009_0333_1601S001403H.fits 
 7 -- ft931009_0333_1601S001803H.fits 
 8 -- ft931009_0333_1601S001903H.fits 
 9 -- ft931009_0333_1601S002003H.fits 
 10 -- ft931009_0333_1601S002403H.fits 
 11 -- ft931009_0333_1601S002803H.fits 
 12 -- ft931009_0333_1601S003203H.fits 
 13 -- ft931009_0333_1601S003403H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad10001000s000203m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  13  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 13 good fits files ...
Merging binary extension #: 1 
 1 -- ft931009_0333_1601S000903M.fits 
 2 -- ft931009_0333_1601S001103M.fits 
 3 -- ft931009_0333_1601S001503M.fits 
 4 -- ft931009_0333_1601S002103M.fits 
 5 -- ft931009_0333_1601S002303M.fits 
 6 -- ft931009_0333_1601S002503M.fits 
 7 -- ft931009_0333_1601S002703M.fits 
 8 -- ft931009_0333_1601S002903M.fits 
 9 -- ft931009_0333_1601S003103M.fits 
 10 -- ft931009_0333_1601S003503M.fits 
 11 -- ft931009_0333_1601S003703M.fits 
 12 -- ft931009_0333_1601S003903M.fits 
 13 -- ft931009_0333_1601S004103M.fits 
Merging binary extension #: 2 
 1 -- ft931009_0333_1601S000903M.fits 
 2 -- ft931009_0333_1601S001103M.fits 
 3 -- ft931009_0333_1601S001503M.fits 
 4 -- ft931009_0333_1601S002103M.fits 
 5 -- ft931009_0333_1601S002303M.fits 
 6 -- ft931009_0333_1601S002503M.fits 
 7 -- ft931009_0333_1601S002703M.fits 
 8 -- ft931009_0333_1601S002903M.fits 
 9 -- ft931009_0333_1601S003103M.fits 
 10 -- ft931009_0333_1601S003503M.fits 
 11 -- ft931009_0333_1601S003703M.fits 
 12 -- ft931009_0333_1601S003903M.fits 
 13 -- ft931009_0333_1601S004103M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Checking ft931009_0333_1601S000502H.fits for validity
-> Creating ad10001000s000302h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  1  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 1 good fits files ...
Merging binary extension #: 1 
 1 -- ft931009_0333_1601S000502H.fits 
Merging binary extension #: 2 
 1 -- ft931009_0333_1601S000502H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad10001000s000402m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  2  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 2 good fits files ...
Merging binary extension #: 1 
 1 -- ft931009_0333_1601S000102M.fits 
 2 -- ft931009_0333_1601S004202M.fits 
Merging binary extension #: 2 
 1 -- ft931009_0333_1601S000102M.fits 
 2 -- ft931009_0333_1601S004202M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad10001000s000502m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  6  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 6 good fits files ...
Merging binary extension #: 1 
 1 -- ft931009_0333_1601S004402M.fits 
 2 -- ft931009_0333_1601S004502M.fits 
 3 -- ft931009_0333_1601S004602M.fits 
 4 -- ft931009_0333_1601S004702M.fits 
 5 -- ft931009_0333_1601S004802M.fits 
 6 -- ft931009_0333_1601S004902M.fits 
Merging binary extension #: 2 
 1 -- ft931009_0333_1601S004402M.fits 
 2 -- ft931009_0333_1601S004502M.fits 
 3 -- ft931009_0333_1601S004602M.fits 
 4 -- ft931009_0333_1601S004702M.fits 
 5 -- ft931009_0333_1601S004802M.fits 
 6 -- ft931009_0333_1601S004902M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad10001000s000602l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  2  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 2 good fits files ...
Merging binary extension #: 1 
 1 -- ft931009_0333_1601S000202L.fits 
 2 -- ft931009_0333_1601S000402L.fits 
Merging binary extension #: 2 
 1 -- ft931009_0333_1601S000202L.fits 
 2 -- ft931009_0333_1601S000402L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad10001000s000703m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  5  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 5 good fits files ...
Merging binary extension #: 1 
 1 -- ft931009_0333_1601S001003M.fits 
 2 -- ft931009_0333_1601S002203M.fits 
 3 -- ft931009_0333_1601S003003M.fits 
 4 -- ft931009_0333_1601S003603M.fits 
 5 -- ft931009_0333_1601S004003M.fits 
Merging binary extension #: 2 
 1 -- ft931009_0333_1601S001003M.fits 
 2 -- ft931009_0333_1601S002203M.fits 
 3 -- ft931009_0333_1601S003003M.fits 
 4 -- ft931009_0333_1601S003603M.fits 
 5 -- ft931009_0333_1601S004003M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Checking ft931009_0333_1601S003303H.fits for validity
-> Creating ad10001000s000803h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  1  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 1 good fits files ...
Merging binary extension #: 1 
 1 -- ft931009_0333_1601S003303H.fits 
Merging binary extension #: 2 
 1 -- ft931009_0333_1601S003303H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Ignoring the following files containing 10 events ft931009_0333_1601S000302L.fits
-> Grouping s1 event files
-> stdout output from group_event_files

1 ft931009_0333_1601S100603H.fits 5336372
1 ft931009_0333_1601S100703H.fits 5336372
1 ft931009_0333_1601S101103H.fits 5336372
1 ft931009_0333_1601S101503H.fits 5336372
1 ft931009_0333_1601S101903H.fits 5336372
1 ft931009_0333_1601S102303H.fits 5336372
1 ft931009_0333_1601S102703H.fits 5336372
1 ft931009_0333_1601S102803H.fits 5336372
1 ft931009_0333_1601S102903H.fits 5336372
2 ft931009_0333_1601S100803M.fits 825882
2 ft931009_0333_1601S101003M.fits 825882
2 ft931009_0333_1601S101203M.fits 825882
2 ft931009_0333_1601S101603M.fits 825882
2 ft931009_0333_1601S101803M.fits 825882
2 ft931009_0333_1601S102003M.fits 825882
2 ft931009_0333_1601S102203M.fits 825882
2 ft931009_0333_1601S102403M.fits 825882
2 ft931009_0333_1601S102603M.fits 825882
2 ft931009_0333_1601S103003M.fits 825882
2 ft931009_0333_1601S103203M.fits 825882
2 ft931009_0333_1601S103403M.fits 825882
2 ft931009_0333_1601S103603M.fits 825882
3 ft931009_0333_1601S100502H.fits 213863
4 ft931009_0333_1601S100102M.fits 44672
4 ft931009_0333_1601S103702M.fits 44672
5 ft931009_0333_1601S103802M.fits 7168
6 ft931009_0333_1601S100202L.fits 6002
6 ft931009_0333_1601S100402L.fits 6002
7 ft931009_0333_1601S100903M.fits 1462
7 ft931009_0333_1601S101703M.fits 1462
7 ft931009_0333_1601S102503M.fits 1462
7 ft931009_0333_1601S103103M.fits 1462
7 ft931009_0333_1601S103503M.fits 1462
8 ft931009_0333_1601S100302L.fits 5

-> Creating ad10001000s100103h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  9  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 9 good fits files ...
Merging binary extension #: 1 
 1 -- ft931009_0333_1601S100603H.fits 
 2 -- ft931009_0333_1601S100703H.fits 
 3 -- ft931009_0333_1601S101103H.fits 
 4 -- ft931009_0333_1601S101503H.fits 
 5 -- ft931009_0333_1601S101903H.fits 
 6 -- ft931009_0333_1601S102303H.fits 
 7 -- ft931009_0333_1601S102703H.fits 
 8 -- ft931009_0333_1601S102803H.fits 
 9 -- ft931009_0333_1601S102903H.fits 
Merging binary extension #: 2 
 1 -- ft931009_0333_1601S100603H.fits 
 2 -- ft931009_0333_1601S100703H.fits 
 3 -- ft931009_0333_1601S101103H.fits 
 4 -- ft931009_0333_1601S101503H.fits 
 5 -- ft931009_0333_1601S101903H.fits 
 6 -- ft931009_0333_1601S102303H.fits 
 7 -- ft931009_0333_1601S102703H.fits 
 8 -- ft931009_0333_1601S102803H.fits 
 9 -- ft931009_0333_1601S102903H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad10001000s100203m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  13  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 13 good fits files ...
Merging binary extension #: 1 
 1 -- ft931009_0333_1601S100803M.fits 
 2 -- ft931009_0333_1601S101003M.fits 
 3 -- ft931009_0333_1601S101203M.fits 
 4 -- ft931009_0333_1601S101603M.fits 
 5 -- ft931009_0333_1601S101803M.fits 
 6 -- ft931009_0333_1601S102003M.fits 
 7 -- ft931009_0333_1601S102203M.fits 
 8 -- ft931009_0333_1601S102403M.fits 
 9 -- ft931009_0333_1601S102603M.fits 
 10 -- ft931009_0333_1601S103003M.fits 
 11 -- ft931009_0333_1601S103203M.fits 
 12 -- ft931009_0333_1601S103403M.fits 
 13 -- ft931009_0333_1601S103603M.fits 
Merging binary extension #: 2 
 1 -- ft931009_0333_1601S100803M.fits 
 2 -- ft931009_0333_1601S101003M.fits 
 3 -- ft931009_0333_1601S101203M.fits 
 4 -- ft931009_0333_1601S101603M.fits 
 5 -- ft931009_0333_1601S101803M.fits 
 6 -- ft931009_0333_1601S102003M.fits 
 7 -- ft931009_0333_1601S102203M.fits 
 8 -- ft931009_0333_1601S102403M.fits 
 9 -- ft931009_0333_1601S102603M.fits 
 10 -- ft931009_0333_1601S103003M.fits 
 11 -- ft931009_0333_1601S103203M.fits 
 12 -- ft931009_0333_1601S103403M.fits 
 13 -- ft931009_0333_1601S103603M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Checking ft931009_0333_1601S100502H.fits for validity
-> Creating ad10001000s100302h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  1  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 1 good fits files ...
Merging binary extension #: 1 
 1 -- ft931009_0333_1601S100502H.fits 
Merging binary extension #: 2 
 1 -- ft931009_0333_1601S100502H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad10001000s100402m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  2  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 2 good fits files ...
Merging binary extension #: 1 
 1 -- ft931009_0333_1601S100102M.fits 
 2 -- ft931009_0333_1601S103702M.fits 
Merging binary extension #: 2 
 1 -- ft931009_0333_1601S100102M.fits 
 2 -- ft931009_0333_1601S103702M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Checking ft931009_0333_1601S103802M.fits for validity
-> Creating ad10001000s100502m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  1  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 1 good fits files ...
Merging binary extension #: 1 
 1 -- ft931009_0333_1601S103802M.fits 
Merging binary extension #: 2 
 1 -- ft931009_0333_1601S103802M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad10001000s100602l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  2  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 2 good fits files ...
Merging binary extension #: 1 
 1 -- ft931009_0333_1601S100202L.fits 
 2 -- ft931009_0333_1601S100402L.fits 
Merging binary extension #: 2 
 1 -- ft931009_0333_1601S100202L.fits 
 2 -- ft931009_0333_1601S100402L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad10001000s100703m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  5  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 5 good fits files ...
Merging binary extension #: 1 
 1 -- ft931009_0333_1601S100903M.fits 
 2 -- ft931009_0333_1601S101703M.fits 
 3 -- ft931009_0333_1601S102503M.fits 
 4 -- ft931009_0333_1601S103103M.fits 
 5 -- ft931009_0333_1601S103503M.fits 
Merging binary extension #: 2 
 1 -- ft931009_0333_1601S100903M.fits 
 2 -- ft931009_0333_1601S101703M.fits 
 3 -- ft931009_0333_1601S102503M.fits 
 4 -- ft931009_0333_1601S103103M.fits 
 5 -- ft931009_0333_1601S103503M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Ignoring the following files containing 5 events ft931009_0333_1601S100302L.fits
-> Grouping g2 event files
-> stdout output from group_event_files

1 ft931009_0333_1601G200570H.fits 944031
1 ft931009_0333_1601G200670H.fits 944031
1 ft931009_0333_1601G201470H.fits 944031
1 ft931009_0333_1601G201570H.fits 944031
1 ft931009_0333_1601G202370H.fits 944031
2 ft931009_0333_1601G200170M.fits 23296
2 ft931009_0333_1601G206170M.fits 23296
3 ft931009_0333_1601G202471H.fits 18884
3 ft931009_0333_1601G203271H.fits 18884
3 ft931009_0333_1601G204071H.fits 18884
3 ft931009_0333_1601G204771H.fits 18884
3 ft931009_0333_1601G205371H.fits 18884
3 ft931009_0333_1601G205571H.fits 18884
4 ft931009_0333_1601G202571M.fits 2692
4 ft931009_0333_1601G204871M.fits 2692
4 ft931009_0333_1601G205271M.fits 2692
4 ft931009_0333_1601G205671M.fits 2692
4 ft931009_0333_1601G206071M.fits 2692
5 ft931009_0333_1601G202771M.fits 1600
5 ft931009_0333_1601G203571M.fits 1600
5 ft931009_0333_1601G205071M.fits 1600
5 ft931009_0333_1601G205871M.fits 1600
6 ft931009_0333_1601G200270L.fits 451
6 ft931009_0333_1601G200470L.fits 451
7 ft931009_0333_1601G201370H.fits 167
8 ft931009_0333_1601G202871H.fits 160
8 ft931009_0333_1601G203471H.fits 160
8 ft931009_0333_1601G203671H.fits 160
9 ft931009_0333_1601G201270H.fits 121
10 ft931009_0333_1601G200770H.fits 63
10 ft931009_0333_1601G201670H.fits 63
11 ft931009_0333_1601G200370L.fits 57
12 ft931009_0333_1601G204271H.fits 28
13 ft931009_0333_1601G204371H.fits 24
14 ft931009_0333_1601G202971H.fits 16
14 ft931009_0333_1601G203771H.fits 16
15 ft931009_0333_1601G202671M.fits 12
15 ft931009_0333_1601G204971M.fits 12
15 ft931009_0333_1601G205771M.fits 12
16 ft931009_0333_1601G204571H.fits 12
17 ft931009_0333_1601G201170H.fits 8
18 ft931009_0333_1601G203071H.fits 8
18 ft931009_0333_1601G203871H.fits 8
19 ft931009_0333_1601G203171H.fits 8
19 ft931009_0333_1601G203971H.fits 8
20 ft931009_0333_1601G205171M.fits 8
20 ft931009_0333_1601G205971M.fits 8
21 ft931009_0333_1601G203371H.fits 4
22 ft931009_0333_1601G204171H.fits 4
23 ft931009_0333_1601G204471H.fits 4
24 ft931009_0333_1601G204671H.fits 4
25 ft931009_0333_1601G205471H.fits 4

-> Creating ad10001000g200170h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  5  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 5 good fits files ...
Merging binary extension #: 1 
 1 -- ft931009_0333_1601G200570H.fits 
 2 -- ft931009_0333_1601G200670H.fits 
 3 -- ft931009_0333_1601G201470H.fits 
 4 -- ft931009_0333_1601G201570H.fits 
 5 -- ft931009_0333_1601G202370H.fits 
Merging binary extension #: 2 
 1 -- ft931009_0333_1601G200570H.fits 
 2 -- ft931009_0333_1601G200670H.fits 
 3 -- ft931009_0333_1601G201470H.fits 
 4 -- ft931009_0333_1601G201570H.fits 
 5 -- ft931009_0333_1601G202370H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad10001000g200270m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  2  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 2 good fits files ...
Merging binary extension #: 1 
 1 -- ft931009_0333_1601G200170M.fits 
 2 -- ft931009_0333_1601G206170M.fits 
Merging binary extension #: 2 
 1 -- ft931009_0333_1601G200170M.fits 
 2 -- ft931009_0333_1601G206170M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad10001000g200371h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  6  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 6 good fits files ...
Merging binary extension #: 1 
 1 -- ft931009_0333_1601G202471H.fits 
 2 -- ft931009_0333_1601G203271H.fits 
 3 -- ft931009_0333_1601G204071H.fits 
 4 -- ft931009_0333_1601G204771H.fits 
 5 -- ft931009_0333_1601G205371H.fits 
 6 -- ft931009_0333_1601G205571H.fits 
Merging binary extension #: 2 
 1 -- ft931009_0333_1601G202471H.fits 
 2 -- ft931009_0333_1601G203271H.fits 
 3 -- ft931009_0333_1601G204071H.fits 
 4 -- ft931009_0333_1601G204771H.fits 
 5 -- ft931009_0333_1601G205371H.fits 
 6 -- ft931009_0333_1601G205571H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad10001000g200471m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  5  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 5 good fits files ...
Merging binary extension #: 1 
 1 -- ft931009_0333_1601G202571M.fits 
 2 -- ft931009_0333_1601G204871M.fits 
 3 -- ft931009_0333_1601G205271M.fits 
 4 -- ft931009_0333_1601G205671M.fits 
 5 -- ft931009_0333_1601G206071M.fits 
Merging binary extension #: 2 
 1 -- ft931009_0333_1601G202571M.fits 
 2 -- ft931009_0333_1601G204871M.fits 
 3 -- ft931009_0333_1601G205271M.fits 
 4 -- ft931009_0333_1601G205671M.fits 
 5 -- ft931009_0333_1601G206071M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad10001000g200571m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  4  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 4 good fits files ...
Merging binary extension #: 1 
 1 -- ft931009_0333_1601G202771M.fits 
 2 -- ft931009_0333_1601G203571M.fits 
 3 -- ft931009_0333_1601G205071M.fits 
 4 -- ft931009_0333_1601G205871M.fits 
Merging binary extension #: 2 
 1 -- ft931009_0333_1601G202771M.fits 
 2 -- ft931009_0333_1601G203571M.fits 
 3 -- ft931009_0333_1601G205071M.fits 
 4 -- ft931009_0333_1601G205871M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Ignoring the following files containing 451 events ft931009_0333_1601G200270L.fits ft931009_0333_1601G200470L.fits
-> Ignoring the following files containing 167 events ft931009_0333_1601G201370H.fits
-> Ignoring the following files containing 160 events ft931009_0333_1601G202871H.fits ft931009_0333_1601G203471H.fits ft931009_0333_1601G203671H.fits
-> Ignoring the following files containing 121 events ft931009_0333_1601G201270H.fits
-> Ignoring the following files containing 63 events ft931009_0333_1601G200770H.fits ft931009_0333_1601G201670H.fits
-> Ignoring the following files containing 57 events ft931009_0333_1601G200370L.fits
-> Ignoring the following files containing 28 events ft931009_0333_1601G204271H.fits
-> Ignoring the following files containing 24 events ft931009_0333_1601G204371H.fits
-> Ignoring the following files containing 16 events ft931009_0333_1601G202971H.fits ft931009_0333_1601G203771H.fits
-> Ignoring the following files containing 12 events ft931009_0333_1601G202671M.fits ft931009_0333_1601G204971M.fits ft931009_0333_1601G205771M.fits
-> Ignoring the following files containing 12 events ft931009_0333_1601G204571H.fits
-> Ignoring the following files containing 8 events ft931009_0333_1601G201170H.fits
-> Ignoring the following files containing 8 events ft931009_0333_1601G203071H.fits ft931009_0333_1601G203871H.fits
-> Ignoring the following files containing 8 events ft931009_0333_1601G203171H.fits ft931009_0333_1601G203971H.fits
-> Ignoring the following files containing 8 events ft931009_0333_1601G205171M.fits ft931009_0333_1601G205971M.fits
-> Ignoring the following files containing 4 events ft931009_0333_1601G203371H.fits
-> Ignoring the following files containing 4 events ft931009_0333_1601G204171H.fits
-> Ignoring the following files containing 4 events ft931009_0333_1601G204471H.fits
-> Ignoring the following files containing 4 events ft931009_0333_1601G204671H.fits
-> Ignoring the following files containing 4 events ft931009_0333_1601G205471H.fits
-> Grouping g3 event files
-> stdout output from group_event_files

1 ft931009_0333_1601G300570H.fits 967766
1 ft931009_0333_1601G300670H.fits 967766
1 ft931009_0333_1601G301470H.fits 967766
1 ft931009_0333_1601G301570H.fits 967766
1 ft931009_0333_1601G302370H.fits 967766
2 ft931009_0333_1601G300170M.fits 23295
2 ft931009_0333_1601G307370M.fits 23295
3 ft931009_0333_1601G302471H.fits 18852
3 ft931009_0333_1601G302671H.fits 18852
3 ft931009_0333_1601G303471H.fits 18852
3 ft931009_0333_1601G304271H.fits 18852
3 ft931009_0333_1601G305171H.fits 18852
3 ft931009_0333_1601G305771H.fits 18852
3 ft931009_0333_1601G305971H.fits 18852
3 ft931009_0333_1601G306171H.fits 18852
3 ft931009_0333_1601G306371H.fits 18852
3 ft931009_0333_1601G306571H.fits 18852
3 ft931009_0333_1601G306671H.fits 18852
3 ft931009_0333_1601G306771H.fits 18852
4 ft931009_0333_1601G302771M.fits 2692
4 ft931009_0333_1601G305271M.fits 2692
4 ft931009_0333_1601G305671M.fits 2692
4 ft931009_0333_1601G306871M.fits 2692
4 ft931009_0333_1601G307271M.fits 2692
5 ft931009_0333_1601G302971M.fits 1600
5 ft931009_0333_1601G303771M.fits 1600
5 ft931009_0333_1601G305471M.fits 1600
5 ft931009_0333_1601G307071M.fits 1600
6 ft931009_0333_1601G300270L.fits 450
6 ft931009_0333_1601G300470L.fits 450
7 ft931009_0333_1601G303071H.fits 156
7 ft931009_0333_1601G303671H.fits 156
7 ft931009_0333_1601G303871H.fits 156
8 ft931009_0333_1601G301370H.fits 133
9 ft931009_0333_1601G300770H.fits 64
10 ft931009_0333_1601G301270H.fits 52
11 ft931009_0333_1601G300370L.fits 50
12 ft931009_0333_1601G304471H.fits 24
13 ft931009_0333_1601G304771H.fits 20
14 ft931009_0333_1601G303171H.fits 16
14 ft931009_0333_1601G303971H.fits 16
15 ft931009_0333_1601G304871H.fits 16
16 ft931009_0333_1601G302871M.fits 12
16 ft931009_0333_1601G305371M.fits 12
16 ft931009_0333_1601G306971M.fits 12
17 ft931009_0333_1601G302571H.fits 8
18 ft931009_0333_1601G303271H.fits 8
18 ft931009_0333_1601G304071H.fits 8
19 ft931009_0333_1601G303371H.fits 8
19 ft931009_0333_1601G304171H.fits 8
20 ft931009_0333_1601G303571H.fits 8
21 ft931009_0333_1601G305571M.fits 8
21 ft931009_0333_1601G307171M.fits 8
22 ft931009_0333_1601G305871H.fits 8
23 ft931009_0333_1601G306471H.fits 8
24 ft931009_0333_1601G304371H.fits 4
25 ft931009_0333_1601G304571H.fits 4
26 ft931009_0333_1601G304671H.fits 4
27 ft931009_0333_1601G304971H.fits 4
28 ft931009_0333_1601G305071H.fits 4
29 ft931009_0333_1601G306071H.fits 4
30 ft931009_0333_1601G306271H.fits 4

-> Creating ad10001000g300170h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  5  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 5 good fits files ...
Merging binary extension #: 1 
 1 -- ft931009_0333_1601G300570H.fits 
 2 -- ft931009_0333_1601G300670H.fits 
 3 -- ft931009_0333_1601G301470H.fits 
 4 -- ft931009_0333_1601G301570H.fits 
 5 -- ft931009_0333_1601G302370H.fits 
Merging binary extension #: 2 
 1 -- ft931009_0333_1601G300570H.fits 
 2 -- ft931009_0333_1601G300670H.fits 
 3 -- ft931009_0333_1601G301470H.fits 
 4 -- ft931009_0333_1601G301570H.fits 
 5 -- ft931009_0333_1601G302370H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad10001000g300270m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  2  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 2 good fits files ...
Merging binary extension #: 1 
 1 -- ft931009_0333_1601G300170M.fits 
 2 -- ft931009_0333_1601G307370M.fits 
Merging binary extension #: 2 
 1 -- ft931009_0333_1601G300170M.fits 
 2 -- ft931009_0333_1601G307370M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad10001000g300371h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  12  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 12 good fits files ...
Merging binary extension #: 1 
 1 -- ft931009_0333_1601G302471H.fits 
 2 -- ft931009_0333_1601G302671H.fits 
 3 -- ft931009_0333_1601G303471H.fits 
 4 -- ft931009_0333_1601G304271H.fits 
 5 -- ft931009_0333_1601G305171H.fits 
 6 -- ft931009_0333_1601G305771H.fits 
 7 -- ft931009_0333_1601G305971H.fits 
 8 -- ft931009_0333_1601G306171H.fits 
 9 -- ft931009_0333_1601G306371H.fits 
 10 -- ft931009_0333_1601G306571H.fits 
 11 -- ft931009_0333_1601G306671H.fits 
 12 -- ft931009_0333_1601G306771H.fits 
Merging binary extension #: 2 
 1 -- ft931009_0333_1601G302471H.fits 
 2 -- ft931009_0333_1601G302671H.fits 
 3 -- ft931009_0333_1601G303471H.fits 
 4 -- ft931009_0333_1601G304271H.fits 
 5 -- ft931009_0333_1601G305171H.fits 
 6 -- ft931009_0333_1601G305771H.fits 
 7 -- ft931009_0333_1601G305971H.fits 
 8 -- ft931009_0333_1601G306171H.fits 
 9 -- ft931009_0333_1601G306371H.fits 
 10 -- ft931009_0333_1601G306571H.fits 
 11 -- ft931009_0333_1601G306671H.fits 
 12 -- ft931009_0333_1601G306771H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad10001000g300471m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  5  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 5 good fits files ...
Merging binary extension #: 1 
 1 -- ft931009_0333_1601G302771M.fits 
 2 -- ft931009_0333_1601G305271M.fits 
 3 -- ft931009_0333_1601G305671M.fits 
 4 -- ft931009_0333_1601G306871M.fits 
 5 -- ft931009_0333_1601G307271M.fits 
Merging binary extension #: 2 
 1 -- ft931009_0333_1601G302771M.fits 
 2 -- ft931009_0333_1601G305271M.fits 
 3 -- ft931009_0333_1601G305671M.fits 
 4 -- ft931009_0333_1601G306871M.fits 
 5 -- ft931009_0333_1601G307271M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad10001000g300571m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  4  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 4 good fits files ...
Merging binary extension #: 1 
 1 -- ft931009_0333_1601G302971M.fits 
 2 -- ft931009_0333_1601G303771M.fits 
 3 -- ft931009_0333_1601G305471M.fits 
 4 -- ft931009_0333_1601G307071M.fits 
Merging binary extension #: 2 
 1 -- ft931009_0333_1601G302971M.fits 
 2 -- ft931009_0333_1601G303771M.fits 
 3 -- ft931009_0333_1601G305471M.fits 
 4 -- ft931009_0333_1601G307071M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Ignoring the following files containing 450 events ft931009_0333_1601G300270L.fits ft931009_0333_1601G300470L.fits
-> Ignoring the following files containing 156 events ft931009_0333_1601G303071H.fits ft931009_0333_1601G303671H.fits ft931009_0333_1601G303871H.fits
-> Ignoring the following files containing 133 events ft931009_0333_1601G301370H.fits
-> Ignoring the following files containing 64 events ft931009_0333_1601G300770H.fits
-> Ignoring the following files containing 52 events ft931009_0333_1601G301270H.fits
-> Ignoring the following files containing 50 events ft931009_0333_1601G300370L.fits
-> Ignoring the following files containing 24 events ft931009_0333_1601G304471H.fits
-> Ignoring the following files containing 20 events ft931009_0333_1601G304771H.fits
-> Ignoring the following files containing 16 events ft931009_0333_1601G303171H.fits ft931009_0333_1601G303971H.fits
-> Ignoring the following files containing 16 events ft931009_0333_1601G304871H.fits
-> Ignoring the following files containing 12 events ft931009_0333_1601G302871M.fits ft931009_0333_1601G305371M.fits ft931009_0333_1601G306971M.fits
-> Ignoring the following files containing 8 events ft931009_0333_1601G302571H.fits
-> Ignoring the following files containing 8 events ft931009_0333_1601G303271H.fits ft931009_0333_1601G304071H.fits
-> Ignoring the following files containing 8 events ft931009_0333_1601G303371H.fits ft931009_0333_1601G304171H.fits
-> Ignoring the following files containing 8 events ft931009_0333_1601G303571H.fits
-> Ignoring the following files containing 8 events ft931009_0333_1601G305571M.fits ft931009_0333_1601G307171M.fits
-> Ignoring the following files containing 8 events ft931009_0333_1601G305871H.fits
-> Ignoring the following files containing 8 events ft931009_0333_1601G306471H.fits
-> Ignoring the following files containing 4 events ft931009_0333_1601G304371H.fits
-> Ignoring the following files containing 4 events ft931009_0333_1601G304571H.fits
-> Ignoring the following files containing 4 events ft931009_0333_1601G304671H.fits
-> Ignoring the following files containing 4 events ft931009_0333_1601G304971H.fits
-> Ignoring the following files containing 4 events ft931009_0333_1601G305071H.fits
-> Ignoring the following files containing 4 events ft931009_0333_1601G306071H.fits
-> Ignoring the following files containing 4 events ft931009_0333_1601G306271H.fits
-> stdout output from tar

a ft931009_0333_1601G200270L.fits 37K
a ft931009_0333_1601G200370L.fits 31K
a ft931009_0333_1601G200470L.fits 37K
a ft931009_0333_1601G200770H.fits 31K
a ft931009_0333_1601G201170H.fits 31K
a ft931009_0333_1601G201270H.fits 34K
a ft931009_0333_1601G201370H.fits 34K
a ft931009_0333_1601G201670H.fits 31K
a ft931009_0333_1601G202671M.fits 26K
a ft931009_0333_1601G202871H.fits 43K
a ft931009_0333_1601G202971H.fits 29K
a ft931009_0333_1601G203071H.fits 26K
a ft931009_0333_1601G203171H.fits 26K
a ft931009_0333_1601G203371H.fits 26K
a ft931009_0333_1601G203471H.fits 71K
a ft931009_0333_1601G203671H.fits 43K
a ft931009_0333_1601G203771H.fits 29K
a ft931009_0333_1601G203871H.fits 26K
a ft931009_0333_1601G203971H.fits 26K
a ft931009_0333_1601G204171H.fits 26K
a ft931009_0333_1601G204271H.fits 40K
a ft931009_0333_1601G204371H.fits 37K
a ft931009_0333_1601G204471H.fits 26K
a ft931009_0333_1601G204571H.fits 31K
a ft931009_0333_1601G204671H.fits 26K
a ft931009_0333_1601G204971M.fits 26K
a ft931009_0333_1601G205171M.fits 26K
a ft931009_0333_1601G205471H.fits 26K
a ft931009_0333_1601G205771M.fits 26K
a ft931009_0333_1601G205971M.fits 26K
a ft931009_0333_1601G300270L.fits 37K
a ft931009_0333_1601G300370L.fits 31K
a ft931009_0333_1601G300470L.fits 37K
a ft931009_0333_1601G300770H.fits 31K
a ft931009_0333_1601G301270H.fits 31K
a ft931009_0333_1601G301370H.fits 34K
a ft931009_0333_1601G302571H.fits 29K
a ft931009_0333_1601G302871M.fits 26K
a ft931009_0333_1601G303071H.fits 43K
a ft931009_0333_1601G303171H.fits 29K
a ft931009_0333_1601G303271H.fits 26K
a ft931009_0333_1601G303371H.fits 26K
a ft931009_0333_1601G303571H.fits 29K
a ft931009_0333_1601G303671H.fits 68K
a ft931009_0333_1601G303871H.fits 43K
a ft931009_0333_1601G303971H.fits 29K
a ft931009_0333_1601G304071H.fits 26K
a ft931009_0333_1601G304171H.fits 26K
a ft931009_0333_1601G304371H.fits 26K
a ft931009_0333_1601G304471H.fits 37K
a ft931009_0333_1601G304571H.fits 26K
a ft931009_0333_1601G304671H.fits 26K
a ft931009_0333_1601G304771H.fits 34K
a ft931009_0333_1601G304871H.fits 31K
a ft931009_0333_1601G304971H.fits 26K
a ft931009_0333_1601G305071H.fits 26K
a ft931009_0333_1601G305371M.fits 26K
a ft931009_0333_1601G305571M.fits 26K
a ft931009_0333_1601G305871H.fits 29K
a ft931009_0333_1601G306071H.fits 26K
a ft931009_0333_1601G306271H.fits 26K
a ft931009_0333_1601G306471H.fits 29K
a ft931009_0333_1601G306971M.fits 26K
a ft931009_0333_1601G307171M.fits 26K
a ft931009_0333_1601S000302L.fits 29K
a ft931009_0333_1601S100302L.fits 29K

Converting FAINT mode files to BRIGHT and BRIGHT2 modes (19:50:47)

-> No FAINT mode data to convert to bright mode

Calibrating the unfiltered event files (19:50:50)

-> Creating GIS gain history files
-> leapsec.fits is already present in the working directory
-> Fetching gis_temp2gain.fits from /aps/calibration
-> Creating Gain History File ft931009_0333_1601.ghf
-> stdout output from temp2gain

temp2gain V4.6
leapsec FITS data was successfully read

'ft931009_0333.1601' is successfully opened
Data Start Time is 24291191.61 (19931009 033310)
Time Margin 2.0 sec included
Sync error detected in 9366 th SF
Sync error detected in 9367 th SF
Sync error detected in 9369 th SF
Sync error detected in 9393 th SF
Sync error detected in 9402 th SF
Sync error detected in 9436 th SF
Sync error detected in 9449 th SF
Sync error detected in 9456 th SF
Sync error detected in 9474 th SF
Sync error detected in 9478 th SF
Sync error detected in 9529 th SF
Sync error detected in 9549 th SF
Sync error detected in 9596 th SF
Sync error detected in 9607 th SF
Sync error detected in 9609 th SF
Sync error detected in 9610 th SF
Sync error detected in 9613 th SF
Sync error detected in 9673 th SF
Sync error detected in 9680 th SF
Sync error detected in 9685 th SF
Sync error detected in 9688 th SF
Sync error detected in 9690 th SF
'ft931009_0333.1601' EOF detected, sf=10625
Data End Time is 24336107.45 (19931009 160146)
Gain History is written in ft931009_0333_1601.ghf

-> Generating attitude correction table ad10001000_009_bp4.txt
-> Extracting info from ft931009_0333_1601CMHK.fits
-> Running ascalin on all unfiltered event files
-> Preparing to run ascalin on ad10001000g200170h.unf
-> Fetching gis2_ano_on_flf_180295.fits from /aps/calibration
-> Running ascalin on ad10001000g200170h.unf
-> stdout output from ascalin

ASCALIN_V0.9v

-> Preparing to run ascalin on ad10001000g200270m.unf
-> gis2_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad10001000g200270m.unf
-> stdout output from ascalin

ASCALIN_V0.9v

-> Preparing to run ascalin on ad10001000g300170h.unf
-> Fetching gis3_ano_on_flf_180295.fits from /aps/calibration
-> Running ascalin on ad10001000g300170h.unf
-> stdout output from ascalin

ASCALIN_V0.9v

-> Preparing to run ascalin on ad10001000g300270m.unf
-> gis3_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad10001000g300270m.unf
-> stdout output from ascalin

ASCALIN_V0.9v

-> Preparing to run ascalin on ad10001000s000302h.unf
-> Fetching s0_teldef_ascalin.fits from /aps/calibration
-> Fetching sisph2pi_110397.fits from /aps/calibration
-> Running ascalin on ad10001000s000302h.unf
-> stdout output from ascalin

ASCALIN_V0.9v

-> Preparing to run ascalin on ad10001000s000402m.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad10001000s000402m.unf
-> stdout output from ascalin

ASCALIN_V0.9v

-> Preparing to run ascalin on ad10001000s000502m.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad10001000s000502m.unf
-> stdout output from ascalin

ASCALIN_V0.9v

-> Preparing to run ascalin on ad10001000s000602l.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad10001000s000602l.unf
-> stdout output from ascalin

ASCALIN_V0.9v

-> Preparing to run ascalin on ad10001000s100302h.unf
-> Fetching s1_teldef_ascalin.fits from /aps/calibration
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad10001000s100302h.unf
-> stdout output from ascalin

ASCALIN_V0.9v

-> Preparing to run ascalin on ad10001000s100402m.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad10001000s100402m.unf
-> stdout output from ascalin

ASCALIN_V0.9v

-> Preparing to run ascalin on ad10001000s100502m.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad10001000s100502m.unf
-> stdout output from ascalin

ASCALIN_V0.9v

-> Preparing to run ascalin on ad10001000s100602l.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad10001000s100602l.unf
-> stdout output from ascalin

ASCALIN_V0.9v

Checking FAST mode files for correct CCD mode (20:8:25)

-> Checking ad10001000s000103h.unf
-> Checking ad10001000s000203m.unf
-> Checking ad10001000s000703m.unf
-> Checking ad10001000s000803h.unf
-> Checking ad10001000s100103h.unf
-> Checking ad10001000s100203m.unf
-> Checking ad10001000s100703m.unf

Creating filter files (20:10:22)

-> leapsec.fits is already present in the working directory
-> Fetching rigidity.data.1.23 from /aps/calibration
-> Copying orbit file /aps/orbit/frf.orbit.253 to working directory
-> Creating ft931009_0333_1601.mkf
-> stdout output from mkfilter2

 
leapsec FITS data was successfully read

S0-HK file: ft931009_0333_1601S0HK.fits

S1-HK file: ft931009_0333_1601S1HK.fits

G2-HK file: ft931009_0333_1601G2HK.fits

G3-HK file: ft931009_0333_1601G3HK.fits

Date and time are: 1993-10-09 03:31:53  mjd=49269.147148

Orbit file name is frf.orbit.253

Epoch of Orbital Elements: 1993-10-04 14:00:00

Rigidity Data File: rigidity.data.1.23

Attitude FRF: fa931009_0333.1601

output FITS File: ft931009_0333_1601.mkf

mkfilter2: Warning, faQparam error: time= 2.429112960917e+07 outside range of attitude file

           Euler angles undefined for this bin

mkfilter2: Warning, faQparam error: time= 2.429116160917e+07 outside range of attitude file

           Euler angles undefined for this bin

Total 1406 Data bins were processed.

-> Adding deadtime to ft931009_0333_1601.mkf
-> Plotting quantities from ft931009_0333_1601.mkf
-> Extracting telemetry corruption files

Cleaning and filtering the unfiltered event files (20:39:2)

-> Filtering ad10001000s000103h.unf into ad10001000s000103h.evt
-> Calculating statistics for S0_PIXL1
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   6402.4607
 The mean of the selected column is                  14.291207
 The standard deviation of the selected column is    3.7365828
 The minimum of selected column is                   5.1250339
 The maximum of selected column is                   81.687790
 The number of points used in calculation is              448

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>3 && S0_PIXL1<25.5 )  )
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 GX5-1       FAST        HIGH        1993-10-09  04:54:09    0.17E+05  5500348 0100
Processing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s000103h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
        3898497   3619684              0    278813         0         0
 Writing events file
3619684 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
       3898497   3619684              0    278813         0         0
   in  14571.     seconds
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA > read events ad10001000s000103h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
Setting X and Y to RAW
 
Getting Min and Max for Energy Column...
Got min and max for PHA:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
Area discrimination is disabled.
The mask is set from    6 to  425
Both the area inside and outside the mask in the telemetry.
Use SELECT FAST to select the region  inside or outside the mask.
!screen:ASCA-SIS0-FAST > select event "grade==0"
!screen:ASCA-SIS0-FAST > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-FAST > extract events
!screen:ASCA-SIS0-FAST > save events outfile=ad10001000s000103h.evt use_events=no
Wrote events list to file ad10001000s000103h.evt
!screen:ASCA-SIS0-FAST > exit save_session=no

-> Filtering ad10001000s000203m.unf into ad10001000s000203m.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0)  )&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 GX5-1       FAST        MEDIUM      1993-10-09  05:35:57    0.13E+05   555115 0100
Processing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s000203m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data19/seq_proc/ad0_10001000.009/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA > read events ad10001000s000203m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
Setting X and Y to RAW
 
Getting Min and Max for Energy Column...
Got min and max for PHA:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
Area discrimination is disabled.
The mask is set from  171 to  299
Both the area inside and outside the mask in the telemetry.
Use SELECT FAST to select the region  inside or outside the mask.
!screen:ASCA-SIS0-FAST > select event "grade==0"
!screen:ASCA-SIS0-FAST > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-FAST > extract events
!screen:ASCA-SIS0-FAST > save events outfile=ad10001000s000203m.evt use_events=no
Wrote events list to file ad10001000s000203m.evt
!screen:ASCA-SIS0-FAST > exit save_session=no

-> Deleting ad10001000s000203m.evt since it contains 0 events
-> Filtering ad10001000s000302h.unf into ad10001000s000302h.evt
-> Calculating statistics for S0_PIXL1
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   14132.070
 The mean of the selected column is                  487.31274
 The standard deviation of the selected column is    63.090783
 The minimum of selected column is                   199.95113
 The maximum of selected column is                   520.90820
 The number of points used in calculation is               29

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>298 && S0_PIXL1<676.5 )  )
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 GX5-1       BRIGHT      HIGH        1993-10-09  04:33:33    0.11E+04   253986 0100
Processing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s000302h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
         241822    188171              0     53651         0         0
 Writing events file
 188171 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        241822    188171              0     53651         0         0
   in  887.72     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data19/seq_proc/ad0_10001000.009/screen_in_event.xs
    reading data file: /data/data19/seq_proc/ad0_10001000.009/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :       188171
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1          16         448
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           16
 Number of (internal) image counts   :       188171
 Number of image cts rejected (N, %) :          448 0.24
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0           16            0            0
 
 Image counts      :             0       188171            0            0
 Image cts rejected:             0          448            0            0
 Image cts rej (%) :          0.00         0.24         0.00         0.00
 
    filtering data...
 
 Total counts      :             0       188171            0            0
 Total cts rejected:             0          448            0            0
 Total cts rej (%) :          0.00         0.24         0.00         0.00
 
 Number of clean counts accepted  :       187723
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           16
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA > read events ad10001000s000302h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad10001000s000302h.evt use_events=no
Wrote cleaned events file to ad10001000s000302h.evt
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no

-> Filtering ad10001000s000402m.unf into ad10001000s000402m.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0)  )&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 GX5-1       BRIGHT      MEDIUM      1993-10-09  03:33:01    0.14E+04    44544 0100
Processing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s000402m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data19/seq_proc/ad0_10001000.009/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data19/seq_proc/ad0_10001000.009/screen_in_event.xs
    reading data file: /data/data19/seq_proc/ad0_10001000.009/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA > read events ad10001000s000402m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad10001000s000402m.evt use_events=no
Wrote cleaned events file to ad10001000s000402m.evt
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no

-> Deleting ad10001000s000402m.evt since it contains 0 events
-> Filtering ad10001000s000502m.unf into ad10001000s000502m.evt
-> Calculating statistics for S0_PIXL2
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   10103.246
 The mean of the selected column is                  1443.3208
 The standard deviation of the selected column is    239.35575
 The minimum of selected column is                   1174.8165
 The maximum of selected column is                   1844.6859
 The number of points used in calculation is                7

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL0>0)&&(S0_PIXL1>0)&&(S0_PIXL2>725.2 && S0_PIXL2<2161.3 )&&
(S0_PIXL3>0)  )&&(  (S0_SATF0<1)
   ||(S0_SATF0>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF2<1)
   ||(S0_SATF2>1))
&&(  (S0_SATF3<1)
   ||(S0_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 GX5-1       BRIGHT      MEDIUM      1993-10-09  15:57:27    0.24E+03     6147 1111
Processing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s000502m.unf
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA > read events ad10001000s000502m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
The selection criteria produced no GTI's
Failed to get mkf_exp
 XSL_SELECT: Status =   -10
screen:ASCA-SIS0-BRIGHT > Session saved, goodbye

-> Filtering ad10001000s000602l.unf into ad10001000s000602l.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0)  )&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 GX5-1       BRIGHT      LOW         1993-10-09  03:55:09    0.90E+03     5337 0100
Processing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s000602l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data19/seq_proc/ad0_10001000.009/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data19/seq_proc/ad0_10001000.009/screen_in_event.xs
    reading data file: /data/data19/seq_proc/ad0_10001000.009/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA > read events ad10001000s000602l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad10001000s000602l.evt use_events=no
Wrote cleaned events file to ad10001000s000602l.evt
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no

-> Deleting ad10001000s000602l.evt since it contains 0 events
-> Filtering ad10001000s000703m.unf into ad10001000s000703m.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0)  )&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 GX5-1       FAST        MEDIUM      1993-10-09  05:41:49    0.51E+04     1437 0100
Processing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s000703m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data19/seq_proc/ad0_10001000.009/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA > read events ad10001000s000703m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
Setting X and Y to RAW
 
Getting Min and Max for Energy Column...
Got min and max for PHA:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
Area discrimination is disabled.
The mask is set from  171 to  299
Both the area inside and outside the mask in the telemetry.
Use SELECT FAST to select the region  inside or outside the mask.
!screen:ASCA-SIS0-FAST > select event "grade==0"
!screen:ASCA-SIS0-FAST > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-FAST > extract events
!screen:ASCA-SIS0-FAST > save events outfile=ad10001000s000703m.evt use_events=no
Wrote events list to file ad10001000s000703m.evt
!screen:ASCA-SIS0-FAST > exit save_session=no

-> Deleting ad10001000s000703m.evt since it contains 0 events
-> Filtering ad10001000s000803h.unf into ad10001000s000803h.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0)  )&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 GX5-1       FAST        HIGH        1993-10-09  13:10:01    0.40E+01     1358 0100
Processing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s000803h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
           1002      1002              0         0         0         0
 Writing events file
   1002 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1002      1002              0         0         0         0
   in  4.0000     seconds
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA > read events ad10001000s000803h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
Setting X and Y to RAW
 
Getting Min and Max for Energy Column...
Got min and max for PHA:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
Area discrimination is disabled.
The mask is set from  140 to  268
Both the area inside and outside the mask in the telemetry.
Use SELECT FAST to select the region  inside or outside the mask.
!screen:ASCA-SIS0-FAST > select event "grade==0"
!screen:ASCA-SIS0-FAST > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-FAST > extract events
!screen:ASCA-SIS0-FAST > save events outfile=ad10001000s000803h.evt use_events=no
Wrote events list to file ad10001000s000803h.evt
!screen:ASCA-SIS0-FAST > exit save_session=no

-> Filtering ad10001000s100103h.unf into ad10001000s100103h.evt
-> Calculating statistics for S1_PIXL3
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   6081.4073
 The mean of the selected column is                  13.514239
 The standard deviation of the selected column is    2.0088155
 The minimum of selected column is                   4.2031446
 The maximum of selected column is                   28.906353
 The number of points used in calculation is              450

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>7.4 && S1_PIXL3<19.5 )  )
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 GX5-1       FAST        HIGH        1993-10-09  04:54:33    0.17E+05  5336372 0001
Processing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s100103h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
        4154197   3725545              0    428652         0         0
 Writing events file
3725545 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
       4154197   3725545              0    428652         0         0
   in  14350.     seconds
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA > read events ad10001000s100103h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
Setting X and Y to RAW
 
Getting Min and Max for Energy Column...
Got min and max for PHA:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
Area discrimination is disabled.
The mask is set from  183 to  259
Both the area inside and outside the mask in the telemetry.
Use SELECT FAST to select the region  inside or outside the mask.
!screen:ASCA-SIS1-FAST > select event "grade==0"
!screen:ASCA-SIS1-FAST > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-FAST > extract events
!screen:ASCA-SIS1-FAST > save events outfile=ad10001000s100103h.evt use_events=no
Wrote events list to file ad10001000s100103h.evt
!screen:ASCA-SIS1-FAST > exit save_session=no

-> Filtering ad10001000s100203m.unf into ad10001000s100203m.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0)  )&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 GX5-1       FAST        MEDIUM      1993-10-09  05:35:57    0.13E+05   825882 0001
Processing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s100203m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data19/seq_proc/ad0_10001000.009/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA > read events ad10001000s100203m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
Setting X and Y to RAW
 
Getting Min and Max for Energy Column...
Got min and max for PHA:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
Area discrimination is disabled.
The mask is set from  171 to  299
Both the area inside and outside the mask in the telemetry.
Use SELECT FAST to select the region  inside or outside the mask.
!screen:ASCA-SIS1-FAST > select event "grade==0"
!screen:ASCA-SIS1-FAST > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-FAST > extract events
!screen:ASCA-SIS1-FAST > save events outfile=ad10001000s100203m.evt use_events=no
Wrote events list to file ad10001000s100203m.evt
!screen:ASCA-SIS1-FAST > exit save_session=no

-> Deleting ad10001000s100203m.evt since it contains 0 events
-> Filtering ad10001000s100302h.unf into ad10001000s100302h.evt
-> Calculating statistics for S1_PIXL3
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   11873.342
 The mean of the selected column is                  395.77807
 The standard deviation of the selected column is    50.301425
 The minimum of selected column is                   157.61755
 The maximum of selected column is                   448.93915
 The number of points used in calculation is               30

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>244.8 && S1_PIXL3<546.6 )  )
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 GX5-1       BRIGHT      HIGH        1993-10-09  04:33:33    0.12E+04   213863 0001
Processing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s100302h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
         203854    159007              0     44847         0         0
 Writing events file
 159007 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        203854    159007              0     44847         0         0
   in  911.72     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data19/seq_proc/ad0_10001000.009/screen_in_event.xs
    reading data file: /data/data19/seq_proc/ad0_10001000.009/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :       159007
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1          26        1188
 
 Number of pixels rejected           :           26
 Number of (internal) image counts   :       159007
 Number of image cts rejected (N, %) :         1188 0.75
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           26
 
 Image counts      :             0            0            0       159007
 Image cts rejected:             0            0            0         1188
 Image cts rej (%) :          0.00         0.00         0.00         0.75
 
    filtering data...
 
 Total counts      :             0            0            0       159007
 Total cts rejected:             0            0            0         1188
 Total cts rej (%) :          0.00         0.00         0.00         0.75
 
 Number of clean counts accepted  :       157819
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           26
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA > read events ad10001000s100302h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad10001000s100302h.evt use_events=no
Wrote cleaned events file to ad10001000s100302h.evt
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no

-> Filtering ad10001000s100402m.unf into ad10001000s100402m.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0)  )&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 GX5-1       BRIGHT      MEDIUM      1993-10-09  03:33:01    0.14E+04    44672 0001
Processing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s100402m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data19/seq_proc/ad0_10001000.009/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data19/seq_proc/ad0_10001000.009/screen_in_event.xs
    reading data file: /data/data19/seq_proc/ad0_10001000.009/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA > read events ad10001000s100402m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad10001000s100402m.evt use_events=no
Wrote cleaned events file to ad10001000s100402m.evt
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no

-> Deleting ad10001000s100402m.evt since it contains 0 events
-> Filtering ad10001000s100502m.unf into ad10001000s100502m.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL0>0)&&(S1_PIXL1>0)&&(S1_PIXL2>0)&&(S1_PIXL3>0)  )&&(  (S1_SATF0<1)
   ||(S1_SATF0>1))
&&(  (S1_SATF1<1)
   ||(S1_SATF1>1))
&&(  (S1_SATF2<1)
   ||(S1_SATF2>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 GX5-1       BRIGHT      MEDIUM      1993-10-09  15:57:31    0.24E+03     7168 1111
Processing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s100502m.unf
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA > read events ad10001000s100502m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
The selection criteria produced no GTI's
Failed to get mkf_exp
 XSL_SELECT: Status =   -10
screen:ASCA-SIS1-BRIGHT > Session saved, goodbye

-> Filtering ad10001000s100602l.unf into ad10001000s100602l.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0)  )&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 GX5-1       BRIGHT      LOW         1993-10-09  03:55:09    0.90E+03     6002 0001
Processing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s100602l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data19/seq_proc/ad0_10001000.009/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data19/seq_proc/ad0_10001000.009/screen_in_event.xs
    reading data file: /data/data19/seq_proc/ad0_10001000.009/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA > read events ad10001000s100602l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad10001000s100602l.evt use_events=no
Wrote cleaned events file to ad10001000s100602l.evt
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no

-> Deleting ad10001000s100602l.evt since it contains 0 events
-> Filtering ad10001000s100703m.unf into ad10001000s100703m.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0)  )&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 GX5-1       FAST        MEDIUM      1993-10-09  05:41:49    0.51E+04     1462 0001
Processing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s100703m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data19/seq_proc/ad0_10001000.009/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA > read events ad10001000s100703m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
Setting X and Y to RAW
 
Getting Min and Max for Energy Column...
Got min and max for PHA:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
Area discrimination is disabled.
The mask is set from  171 to  299
Both the area inside and outside the mask in the telemetry.
Use SELECT FAST to select the region  inside or outside the mask.
!screen:ASCA-SIS1-FAST > select event "grade==0"
!screen:ASCA-SIS1-FAST > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-FAST > extract events
!screen:ASCA-SIS1-FAST > save events outfile=ad10001000s100703m.evt use_events=no
Wrote events list to file ad10001000s100703m.evt
!screen:ASCA-SIS1-FAST > exit save_session=no

-> Deleting ad10001000s100703m.evt since it contains 0 events
-> Filtering ad10001000g200170h.unf into ad10001000g200170h.evt
-> Fetching GIS2_REGION256.4
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          HIGH        1993-10-09  04:33:45    0.84E+04   944031     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         944031    915623          21005      7403         0         0
 Writing events file
 915623 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        944031    915623          21005      7403         0         0
   in  8078.0     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
      915623              902385             13238
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA > read events ad10001000g200170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.d/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad10001000g200170h.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no

-> Filtering ad10001000g200270m.unf into ad10001000g200270m.evt
-> GIS2_REGION256.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          MEDIUM      1993-10-09  03:33:13    0.15E+04    23296     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g200270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          23296     10045            480     12771         0         0
 Writing events file
  10045 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         23296     10045            480     12771         0         0
   in  640.15     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
       10045                9901               144
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA > read events ad10001000g200270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.d/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad10001000g200270m.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no

-> Skipping ad10001000g200371h.unf because of mode
-> Skipping ad10001000g200471m.unf because of mode
-> Skipping ad10001000g200571m.unf because of mode
-> Filtering ad10001000g300170h.unf into ad10001000g300170h.evt
-> Fetching GIS3_REGION256.4
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          HIGH        1993-10-09  04:33:45    0.84E+04   967766     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         967766    944325          15727      7714         0         0
 Writing events file
 944325 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        967766    944325          15727      7714         0         0
   in  8078.0     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
      944325              932121             12204
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA > read events ad10001000g300170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.d/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad10001000g300170h.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no

-> Filtering ad10001000g300270m.unf into ad10001000g300270m.evt
-> GIS3_REGION256.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          MEDIUM      1993-10-09  03:33:13    0.15E+04    23295     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g300270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          23295     10069            356     12870         0         0
 Writing events file
  10069 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         23295     10069            356     12870         0         0
   in  640.15     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
       10069                9921               148
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA > read events ad10001000g300270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.d/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad10001000g300270m.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no

-> Skipping ad10001000g300371h.unf because of mode
-> Skipping ad10001000g300471m.unf because of mode
-> Skipping ad10001000g300571m.unf because of mode

Generating images and exposure maps (21:28:20)

-> Generating exposure map ad10001000g200170.expo
-> GIS2_REGION256.4 already present in current directory
-> Standard Output From STOOL regionmap:

-ANNULUS(128.5,128.5,192,88)
-ELLIPSE(167.5,220,24.66,28.95,245.298)

-> gis2_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad10001000g200170h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad10001000g200170h.evt
    reading   gti ext: STDGTI
    reading  cal file: gis2_ano_on_flf_180295.fits
    reading inst file: GIS2_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa931009_0333.1601
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      270.1976     -25.1603      89.6142
 Mean   RA/DEC/ROLL :      270.2055     -25.1392      89.6142
 Pnt    RA/DEC/ROLL :      270.1868     -25.1816      89.6142
 
 Image rebin factor :             1
 Attitude Records   :         42304
 GTI intervals      :            12
 Total GTI (secs)   :      8077.964
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       1344.49      1344.49
  20 Percent Complete: Total/live time:       2232.49      2232.49
  30 Percent Complete: Total/live time:       2519.49      2519.49
  40 Percent Complete: Total/live time:       3549.99      3549.99
  50 Percent Complete: Total/live time:       4201.99      4201.99
  60 Percent Complete: Total/live time:       5556.48      5556.48
  70 Percent Complete: Total/live time:       5807.98      5807.98
  80 Percent Complete: Total/live time:       6822.48      6822.48
  90 Percent Complete: Total/live time:       7729.47      7729.47
 100 Percent Complete: Total/live time:       8077.96      8077.96
 
 Number of attitude steps  used:           20
 Number of attitude steps avail:        17222
 Mean RA/DEC pixel offset:       -9.8353      -3.2509
 
    writing expo file: ad10001000g200170.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad10001000g200170h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad10001000g200170h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          HIGH        1993-10-09  04:33:45    0.81E+04   902385     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         902385    901166           1219         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        902385    901166           1219         0         0         0
   in  8078.0     seconds
 Image            has   901166 counts for  111.6     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         902385    120442           1219         0         0    780724
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        902385    120442           1219         0         0    780724
   in  8078.0     seconds
 Image            has   120442 counts for  14.91     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         902385    783609           1219         0         0    117557
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        902385    783609           1219         0         0    117557
   in  8078.0     seconds
 Image            has   783609 counts for  97.01     counts/sec
 Command not found; type ? for a command listing
!ad10001000g200170h:ASCA >
!ad10001000g200170h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad10001000g200170h:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!ad10001000g200170h:ASCA > read events ad10001000g200170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!ad10001000g200170h:ASCA-GIS2-PH > set image sky
!ad10001000g200170h:ASCA-GIS2-PH > filter region corner_point.reg
!ad10001000g200170h:ASCA-GIS2-PH > extract image
!ad10001000g200170h:ASCA-GIS2-PH > save image outfile=ad10001000g200170_all.img
Wrote image to file ad10001000g200170_all.img
!ad10001000g200170h:ASCA-GIS2-PH > filter pha_cut 0 170
!ad10001000g200170h:ASCA-GIS2-PH > extract image
!ad10001000g200170h:ASCA-GIS2-PH > save image outfile=ad10001000g200170_lo.img
Wrote image to file ad10001000g200170_lo.img
!ad10001000g200170h:ASCA-GIS2-PH > clear pha_cut
!ad10001000g200170h:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad10001000g200170h:ASCA-GIS2-PH > extract image
!ad10001000g200170h:ASCA-GIS2-PH > save image outfile=ad10001000g200170_hi.img
Wrote image to file ad10001000g200170_hi.img
!ad10001000g200170h:ASCA-GIS2-PH > exit save_session=no

-> Generating exposure map ad10001000g200270.expo
-> GIS2_REGION256.4 already present in current directory
-> gis2_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad10001000g200270m.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad10001000g200270m.evt
    reading   gti ext: STDGTI
    reading  cal file: gis2_ano_on_flf_180295.fits
    reading inst file: GIS2_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa931009_0333.1601
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      270.1976     -25.1603      89.6149
 Mean   RA/DEC/ROLL :      270.1794     -25.1404      89.6149
 Pnt    RA/DEC/ROLL :      270.2618     -25.1969      89.6149
 
 Image rebin factor :             1
 Attitude Records   :         42304
 GTI intervals      :             2
 Total GTI (secs)   :       640.151
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:         99.00        99.00
  20 Percent Complete: Total/live time:        167.00       167.00
  30 Percent Complete: Total/live time:        271.00       271.00
  40 Percent Complete: Total/live time:        271.00       271.00
  50 Percent Complete: Total/live time:        447.00       447.00
  60 Percent Complete: Total/live time:        447.00       447.00
  70 Percent Complete: Total/live time:        544.00       544.00
  80 Percent Complete: Total/live time:        544.00       544.00
  90 Percent Complete: Total/live time:        640.15       640.15
 100 Percent Complete: Total/live time:        640.15       640.15
 
 Number of attitude steps  used:            8
 Number of attitude steps avail:          170
 Mean RA/DEC pixel offset:       -9.4273      -0.5069
 
    writing expo file: ad10001000g200270.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad10001000g200270m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad10001000g200270m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          MEDIUM      1993-10-09  03:33:13    0.64E+03     9901     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           9901      9891             10         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          9901      9891             10         0         0         0
   in  640.15     seconds
 Image            has     9891 counts for  15.45     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           9901      1150             10         0         0      8741
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          9901      1150             10         0         0      8741
   in  640.15     seconds
 Image            has     1150 counts for  1.796     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           9901      8765             10         0         0      1126
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          9901      8765             10         0         0      1126
   in  640.15     seconds
 Image            has     8765 counts for  13.69     counts/sec
 Command not found; type ? for a command listing
!ad10001000g200270m:ASCA >
!ad10001000g200270m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad10001000g200270m:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!ad10001000g200270m:ASCA > read events ad10001000g200270m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!ad10001000g200270m:ASCA-GIS2-PH > set image sky
!ad10001000g200270m:ASCA-GIS2-PH > filter region corner_point.reg
!ad10001000g200270m:ASCA-GIS2-PH > extract image
!ad10001000g200270m:ASCA-GIS2-PH > save image outfile=ad10001000g200270_all.img
Wrote image to file ad10001000g200270_all.img
!ad10001000g200270m:ASCA-GIS2-PH > filter pha_cut 0 170
!ad10001000g200270m:ASCA-GIS2-PH > extract image
!ad10001000g200270m:ASCA-GIS2-PH > save image outfile=ad10001000g200270_lo.img
Wrote image to file ad10001000g200270_lo.img
!ad10001000g200270m:ASCA-GIS2-PH > clear pha_cut
!ad10001000g200270m:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad10001000g200270m:ASCA-GIS2-PH > extract image
!ad10001000g200270m:ASCA-GIS2-PH > save image outfile=ad10001000g200270_hi.img
Wrote image to file ad10001000g200270_hi.img
!ad10001000g200270m:ASCA-GIS2-PH > exit save_session=no

-> Generating exposure map ad10001000g300170.expo
-> GIS3_REGION256.4 already present in current directory
-> Standard Output From STOOL regionmap:

-ANNULUS(128.5,128.5,192,88)
-ELLIPSE(217,95,21.56,25.92,169.216)

-> gis3_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad10001000g300170h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad10001000g300170h.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa931009_0333.1601
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      270.1976     -25.1603      89.6155
 Mean   RA/DEC/ROLL :      270.2027     -25.1639      89.6155
 Pnt    RA/DEC/ROLL :      270.1897     -25.1569      89.6155
 
 Image rebin factor :             1
 Attitude Records   :         42304
 GTI intervals      :            12
 Total GTI (secs)   :      8077.964
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       1344.49      1344.49
  20 Percent Complete: Total/live time:       2232.49      2232.49
  30 Percent Complete: Total/live time:       2519.49      2519.49
  40 Percent Complete: Total/live time:       3549.99      3549.99
  50 Percent Complete: Total/live time:       4201.99      4201.99
  60 Percent Complete: Total/live time:       5556.48      5556.48
  70 Percent Complete: Total/live time:       5807.98      5807.98
  80 Percent Complete: Total/live time:       6822.48      6822.48
  90 Percent Complete: Total/live time:       7729.47      7729.47
 100 Percent Complete: Total/live time:       8077.96      8077.96
 
 Number of attitude steps  used:           20
 Number of attitude steps avail:        17222
 Mean RA/DEC pixel offset:        1.6394      -2.1110
 
    writing expo file: ad10001000g300170.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad10001000g300170h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad10001000g300170h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          HIGH        1993-10-09  04:33:45    0.81E+04   932121     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         932121    931154            967         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        932121    931154            967         0         0         0
   in  8078.0     seconds
 Image            has   931154 counts for  115.3     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         932121    120835            967         0         0    810319
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        932121    120835            967         0         0    810319
   in  8078.0     seconds
 Image            has   120835 counts for  14.96     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         932121    813262            967         0         0    117892
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        932121    813262            967         0         0    117892
   in  8078.0     seconds
 Image            has   813262 counts for  100.7     counts/sec
 Command not found; type ? for a command listing
!ad10001000g300170h:ASCA >
!ad10001000g300170h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad10001000g300170h:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!ad10001000g300170h:ASCA > read events ad10001000g300170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!ad10001000g300170h:ASCA-GIS3-PH > set image sky
!ad10001000g300170h:ASCA-GIS3-PH > filter region corner_point.reg
!ad10001000g300170h:ASCA-GIS3-PH > extract image
!ad10001000g300170h:ASCA-GIS3-PH > save image outfile=ad10001000g300170_all.img
Wrote image to file ad10001000g300170_all.img
!ad10001000g300170h:ASCA-GIS3-PH > filter pha_cut 0 170
!ad10001000g300170h:ASCA-GIS3-PH > extract image
!ad10001000g300170h:ASCA-GIS3-PH > save image outfile=ad10001000g300170_lo.img
Wrote image to file ad10001000g300170_lo.img
!ad10001000g300170h:ASCA-GIS3-PH > clear pha_cut
!ad10001000g300170h:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad10001000g300170h:ASCA-GIS3-PH > extract image
!ad10001000g300170h:ASCA-GIS3-PH > save image outfile=ad10001000g300170_hi.img
Wrote image to file ad10001000g300170_hi.img
!ad10001000g300170h:ASCA-GIS3-PH > exit save_session=no

-> Generating exposure map ad10001000g300270.expo
-> GIS3_REGION256.4 already present in current directory
-> gis3_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad10001000g300270m.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad10001000g300270m.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa931009_0333.1601
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      270.1976     -25.1603      89.6162
 Mean   RA/DEC/ROLL :      270.1765     -25.1651      89.6162
 Pnt    RA/DEC/ROLL :      270.2647     -25.1722      89.6162
 
 Image rebin factor :             1
 Attitude Records   :         42304
 GTI intervals      :             2
 Total GTI (secs)   :       640.151
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:         99.00        99.00
  20 Percent Complete: Total/live time:        167.00       167.00
  30 Percent Complete: Total/live time:        271.00       271.00
  40 Percent Complete: Total/live time:        271.00       271.00
  50 Percent Complete: Total/live time:        447.00       447.00
  60 Percent Complete: Total/live time:        447.00       447.00
  70 Percent Complete: Total/live time:        544.00       544.00
  80 Percent Complete: Total/live time:        544.00       544.00
  90 Percent Complete: Total/live time:        640.15       640.15
 100 Percent Complete: Total/live time:        640.15       640.15
 
 Number of attitude steps  used:            8
 Number of attitude steps avail:          170
 Mean RA/DEC pixel offset:        1.1415       0.5430
 
    writing expo file: ad10001000g300270.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad10001000g300270m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad10001000g300270m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          MEDIUM      1993-10-09  03:33:13    0.64E+03     9921     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           9921      9904             17         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          9921      9904             17         0         0         0
   in  640.15     seconds
 Image            has     9904 counts for  15.47     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           9921      1135             17         0         0      8769
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          9921      1135             17         0         0      8769
   in  640.15     seconds
 Image            has     1135 counts for  1.773     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           9921      8803             17         0         0      1101
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          9921      8803             17         0         0      1101
   in  640.15     seconds
 Image            has     8803 counts for  13.75     counts/sec
 Command not found; type ? for a command listing
!ad10001000g300270m:ASCA >
!ad10001000g300270m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad10001000g300270m:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!ad10001000g300270m:ASCA > read events ad10001000g300270m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!ad10001000g300270m:ASCA-GIS3-PH > set image sky
!ad10001000g300270m:ASCA-GIS3-PH > filter region corner_point.reg
!ad10001000g300270m:ASCA-GIS3-PH > extract image
!ad10001000g300270m:ASCA-GIS3-PH > save image outfile=ad10001000g300270_all.img
Wrote image to file ad10001000g300270_all.img
!ad10001000g300270m:ASCA-GIS3-PH > filter pha_cut 0 170
!ad10001000g300270m:ASCA-GIS3-PH > extract image
!ad10001000g300270m:ASCA-GIS3-PH > save image outfile=ad10001000g300270_lo.img
Wrote image to file ad10001000g300270_lo.img
!ad10001000g300270m:ASCA-GIS3-PH > clear pha_cut
!ad10001000g300270m:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad10001000g300270m:ASCA-GIS3-PH > extract image
!ad10001000g300270m:ASCA-GIS3-PH > save image outfile=ad10001000g300270_hi.img
Wrote image to file ad10001000g300270_hi.img
!ad10001000g300270m:ASCA-GIS3-PH > exit save_session=no

-> Generating exposure map ad10001000s000302.expo
-> s0_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad10001000s000302h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad10001000s000302h.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s0_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF          ON         OFF         OFF
 AREA DISC  IN/OUT:          OUT         OUT          IN          IN
 AREA DISC H START:            6           6           6         316
 AREA DISC H  STOP:          425         425         200         425
 AREA DISC V START:            2           2           2           2
 AREA DISC V  STOP:          422         422         150         112
  
    reading att  file: ./fa931009_0333.1601
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      270.1976     -25.1603      89.6070
 Mean   RA/DEC/ROLL :      270.2228     -25.1519      89.6070
 Pnt    RA/DEC/ROLL :      270.1714     -25.1691      89.6070
 
 Image rebin factor :             4
 Attitude Records   :         42304
 Hot Pixels         :            16
 GTI intervals      :             3
 Total GTI (secs)   :       887.716
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:        887.72       887.72
 100 Percent Complete: Total/live time:        887.72       887.72
 
 Number of attitude steps  used:            2
 Number of attitude steps avail:         1874
 Mean RA/DEC pixel offset:      -19.5252     -51.9856
 
    writing expo file: ad10001000s000302.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad10001000s000302h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad10001000s000302h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 GX5-1       BRIGHT      HIGH        1993-10-09  04:33:33    0.89E+03   187723 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s000302h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         187723    187723              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        187723    187723              0         0         0         0
   in  887.72     seconds
 Image            has   187723 counts for  211.5     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s000302h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         187723     23617              0         0         0    164106
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        187723     23617              0         0         0    164106
   in  887.72     seconds
 Image            has    23617 counts for  26.60     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s000302h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         187723    164261              0         0         0     23462
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        187723    164261              0         0         0     23462
   in  887.72     seconds
 Image            has   164261 counts for  185.0     counts/sec
 Command not found; type ? for a command listing
!ad10001000s000302h:ASCA >
!ad10001000s000302h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad10001000s000302h:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!ad10001000s000302h:ASCA > read events ad10001000s000302h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!ad10001000s000302h:ASCA-SIS0-BRIGHT > set image sky
!ad10001000s000302h:ASCA-SIS0-BRIGHT > filter region corner_point.reg
!ad10001000s000302h:ASCA-SIS0-BRIGHT > extract image
!ad10001000s000302h:ASCA-SIS0-BRIGHT > save image outfile=ad10001000s000302_all.img
Wrote image to file ad10001000s000302_all.img
!ad10001000s000302h:ASCA-SIS0-BRIGHT > filter pha_cut 0 547
!ad10001000s000302h:ASCA-SIS0-BRIGHT > extract image
!ad10001000s000302h:ASCA-SIS0-BRIGHT > save image outfile=ad10001000s000302_lo.img
Wrote image to file ad10001000s000302_lo.img
!ad10001000s000302h:ASCA-SIS0-BRIGHT > clear pha_cut
!ad10001000s000302h:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad10001000s000302h:ASCA-SIS0-BRIGHT > extract image
!ad10001000s000302h:ASCA-SIS0-BRIGHT > save image outfile=ad10001000s000302_hi.img
Wrote image to file ad10001000s000302_hi.img
!ad10001000s000302h:ASCA-SIS0-BRIGHT > exit save_session=no

-> Generating exposure map ad10001000s100302.expo
-> s1_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad10001000s100302h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad10001000s100302h.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s1_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF         OFF         OFF          ON
 AREA DISC  IN/OUT:          OUT          IN         OUT          IN
 AREA DISC H START:            6           6           6         183
 AREA DISC H  STOP:          425         130         425         259
 AREA DISC V START:            1           1           1           1
 AREA DISC V  STOP:          422         422         422         422
  
    reading att  file: ./fa931009_0333.1601
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      270.1976     -25.1603      89.6144
 Mean   RA/DEC/ROLL :      270.2053     -25.1508      89.6144
 Pnt    RA/DEC/ROLL :      270.1889     -25.1702      89.6144
 
 Image rebin factor :             4
 Attitude Records   :         42304
 Hot Pixels         :            26
 GTI intervals      :             3
 Total GTI (secs)   :       911.716
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:        904.84       904.84
  20 Percent Complete: Total/live time:        904.84       904.84
  30 Percent Complete: Total/live time:        911.72       911.72
 100 Percent Complete: Total/live time:        911.72       911.72
 
 Number of attitude steps  used:            3
 Number of attitude steps avail:         2049
 Mean RA/DEC pixel offset:      -28.6893     -21.9352
 
    writing expo file: ad10001000s100302.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad10001000s100302h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad10001000s100302h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 GX5-1       BRIGHT      HIGH        1993-10-09  04:33:33    0.91E+03   157819 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s100302h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         157819    157819              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        157819    157819              0         0         0         0
   in  911.72     seconds
 Image            has   157819 counts for  173.1     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s100302h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         157819     20949              0         0         0    136870
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        157819     20949              0         0         0    136870
   in  911.72     seconds
 Image            has    20949 counts for  22.98     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s100302h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         157819    137025              0         0         0     20794
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        157819    137025              0         0         0     20794
   in  911.72     seconds
 Image            has   137025 counts for  150.3     counts/sec
 Command not found; type ? for a command listing
!ad10001000s100302h:ASCA >
!ad10001000s100302h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad10001000s100302h:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!ad10001000s100302h:ASCA > read events ad10001000s100302h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!ad10001000s100302h:ASCA-SIS1-BRIGHT > set image sky
!ad10001000s100302h:ASCA-SIS1-BRIGHT > filter region corner_point.reg
!ad10001000s100302h:ASCA-SIS1-BRIGHT > extract image
!ad10001000s100302h:ASCA-SIS1-BRIGHT > save image outfile=ad10001000s100302_all.img
Wrote image to file ad10001000s100302_all.img
!ad10001000s100302h:ASCA-SIS1-BRIGHT > filter pha_cut 0 547
!ad10001000s100302h:ASCA-SIS1-BRIGHT > extract image
!ad10001000s100302h:ASCA-SIS1-BRIGHT > save image outfile=ad10001000s100302_lo.img
Wrote image to file ad10001000s100302_lo.img
!ad10001000s100302h:ASCA-SIS1-BRIGHT > clear pha_cut
!ad10001000s100302h:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad10001000s100302h:ASCA-SIS1-BRIGHT > extract image
!ad10001000s100302h:ASCA-SIS1-BRIGHT > save image outfile=ad10001000s100302_hi.img
Wrote image to file ad10001000s100302_hi.img
!ad10001000s100302h:ASCA-SIS1-BRIGHT > exit save_session=no

-> Summing sis images
-> Exposure for ad10001000s000302.expo is 887.716309 seconds
-> Exposure for ad10001000s100302.expo is 911.716187 seconds
-> Summing the following images to produce ad10001000sis32002.totexpo

ad10001000s000302.expo
ad10001000s100302.expo

-> Setting EXPOSURE=1799.432496 in ad10001000sis32002.totexpo
-> Exposure for ad10001000s000302_all.img is 8.877163272015750E+02 seconds
-> ad10001000s000302_all.img has 187723 counts
-> Exposure for ad10001000s100302_all.img is 9.117162239775062E+02 seconds
-> ad10001000s100302_all.img has 157819 counts
-> Summing the following images to produce ad10001000sis32002_all.totsky

ad10001000s000302_all.img
ad10001000s100302_all.img

-> Setting EXPOSURE=1799.43255117908 in ad10001000sis32002_all.totsky
-> Setting TOTCTS=345542 in ad10001000sis32002_all.totsky
-> Exposure for ad10001000s000302_lo.img is 8.877163272015750E+02 seconds
-> ad10001000s000302_lo.img has 23617 counts
-> Exposure for ad10001000s100302_lo.img is 9.117162239775062E+02 seconds
-> ad10001000s100302_lo.img has 20949 counts
-> Summing the following images to produce ad10001000sis32002_lo.totsky

ad10001000s000302_lo.img
ad10001000s100302_lo.img

-> Setting EXPOSURE=1799.43255117908 in ad10001000sis32002_lo.totsky
-> Setting TOTCTS=44566 in ad10001000sis32002_lo.totsky
-> Exposure for ad10001000s000302_hi.img is 8.877163272015750E+02 seconds
-> ad10001000s000302_hi.img has 164261 counts
-> Exposure for ad10001000s100302_hi.img is 9.117162239775062E+02 seconds
-> ad10001000s100302_hi.img has 137025 counts
-> Summing the following images to produce ad10001000sis32002_hi.totsky

ad10001000s000302_hi.img
ad10001000s100302_hi.img

-> Setting EXPOSURE=1799.43255117908 in ad10001000sis32002_hi.totsky
-> Setting TOTCTS=301286 in ad10001000sis32002_hi.totsky
-> Running XIMAGE to create ad10001000sis32002.gif
-> Standard Output From STOOL ximage:

 No of detectors read in:   21
![1]XIMAGE> read/fits ad10001000sis32002_all.totsky
 Telescope ASCA SIS0,SIS1
 Image size = 320 x 320 pixels
 Image rebin = 4
 Image center = 640.5, 640.5
 Reading an image
  Image level, min = 0.0000000 max = 298.00000
 Saving current map
![2]XIMAGE> read/expo ad10001000sis32002.totexpo
 Telescope ASCA SIS0,SIS1
WARNING:  assuming DRPIX based on mission info
 Reading an image
  Image level, min = 0.0000000 max = 29.990543
![3]XIMAGE> smooth
 Sigma (arcmin) :    0.15912
  Scaling factor :     1.00000
  Min and max :   0  244
 Max-preserving scaling factor :     1.2213115
![4]XIMAGE> cpd /ppm
![5]XIMAGE> cey 2000
![6]XIMAGE> disp/correct/noframe
 The image is exposure corrected
 Displaying image
  Min =  0. Max =     59202.0
![7]XIMAGE> grid
![8]XIMAGE> scale
![9]XIMAGE> exit

-> Summing gis images
-> Exposure for ad10001000g200170.expo is 8077.964355 seconds
-> Exposure for ad10001000g200270.expo is 640.151001 seconds
-> Exposure for ad10001000g300170.expo is 8077.964355 seconds
-> Exposure for ad10001000g300270.expo is 640.151001 seconds
-> Summing the following images to produce ad10001000gis25670.totexpo

ad10001000g200170.expo
ad10001000g200270.expo
ad10001000g300170.expo
ad10001000g300270.expo

-> Setting EXPOSURE=17436.230712 in ad10001000gis25670.totexpo
-> Exposure for ad10001000g200170_all.img is 8.077964705407619E+03 seconds
-> ad10001000g200170_all.img has 901166 counts
-> Exposure for ad10001000g200270_all.img is 6.401510407142341E+02 seconds
-> ad10001000g200270_all.img has 9891 counts
-> Exposure for ad10001000g300170_all.img is 8.077964705407619E+03 seconds
-> ad10001000g300170_all.img has 931154 counts
-> Exposure for ad10001000g300270_all.img is 6.401510407142341E+02 seconds
-> ad10001000g300270_all.img has 9904 counts
-> Summing the following images to produce ad10001000gis25670_all.totsky

ad10001000g200170_all.img
ad10001000g200270_all.img
ad10001000g300170_all.img
ad10001000g300270_all.img

-> Setting EXPOSURE=17436.2314922437 in ad10001000gis25670_all.totsky
-> Setting TOTCTS=1852115 in ad10001000gis25670_all.totsky
-> Exposure for ad10001000g200170_lo.img is 8.077964705407619E+03 seconds
-> ad10001000g200170_lo.img has 120442 counts
-> Exposure for ad10001000g200270_lo.img is 6.401510407142341E+02 seconds
-> ad10001000g200270_lo.img has 1150 counts
-> Exposure for ad10001000g300170_lo.img is 8.077964705407619E+03 seconds
-> ad10001000g300170_lo.img has 120835 counts
-> Exposure for ad10001000g300270_lo.img is 6.401510407142341E+02 seconds
-> ad10001000g300270_lo.img has 1135 counts
-> Summing the following images to produce ad10001000gis25670_lo.totsky

ad10001000g200170_lo.img
ad10001000g200270_lo.img
ad10001000g300170_lo.img
ad10001000g300270_lo.img

-> Setting EXPOSURE=17436.2314922437 in ad10001000gis25670_lo.totsky
-> Setting TOTCTS=243562 in ad10001000gis25670_lo.totsky
-> Exposure for ad10001000g200170_hi.img is 8.077964705407619E+03 seconds
-> ad10001000g200170_hi.img has 783609 counts
-> Exposure for ad10001000g200270_hi.img is 6.401510407142341E+02 seconds
-> ad10001000g200270_hi.img has 8765 counts
-> Exposure for ad10001000g300170_hi.img is 8.077964705407619E+03 seconds
-> ad10001000g300170_hi.img has 813262 counts
-> Exposure for ad10001000g300270_hi.img is 6.401510407142341E+02 seconds
-> ad10001000g300270_hi.img has 8803 counts
-> Summing the following images to produce ad10001000gis25670_hi.totsky

ad10001000g200170_hi.img
ad10001000g200270_hi.img
ad10001000g300170_hi.img
ad10001000g300270_hi.img

-> Setting EXPOSURE=17436.2314922437 in ad10001000gis25670_hi.totsky
-> Setting TOTCTS=1614439 in ad10001000gis25670_hi.totsky
-> Running XIMAGE to create ad10001000gis25670.gif
-> Standard Output From STOOL ximage:

 No of detectors read in:   21
![1]XIMAGE> read/fits ad10001000gis25670_all.totsky
 Telescope ASCA GIS2,GIS3
 Image size = 256 x 256 pixels
 Image rebin = 1
 Image center = 128.5, 128.5
 Reading an image
  Image level, min = 0.0000000 max = 1.5542000E+04
 Saving current map
![2]XIMAGE> read/expo ad10001000gis25670.totexpo
 Telescope ASCA GIS2,GIS3
WARNING:  assuming DRPIX based on mission info
 Reading an image
  Image level, min = 0.0000000 max = 290.60388
![3]XIMAGE> smooth
 Sigma (arcmin) :    0.36837
  Scaling factor :     1.00000
  Min and max :   0  10861
 Max-preserving scaling factor :     1.4309916
![4]XIMAGE> cpd /ppm
![5]XIMAGE> cey 2000
![6]XIMAGE> disp/correct/noframe
 The image is exposure corrected
 Displaying image
  Min =  0. Max =     34904.7
![7]XIMAGE> grid
![8]XIMAGE> scale
![9]XIMAGE> exit

Detecting sources in summed images (21:57:18)

-> Smoothing ad10001000gis25670_all.totsky with ad10001000gis25670.totexpo
-> Clipping exposures below 2615.4346068 seconds
-> Detecting sources in ad10001000gis25670_all.smooth
-> Standard Output From STOOL ascasource:

108 149 0.668353 43 7 7251.02
71 193 0.00332531 14 15 36.9574

-> Smoothing ad10001000gis25670_hi.totsky with ad10001000gis25670.totexpo
-> Clipping exposures below 2615.4346068 seconds
-> Detecting sources in ad10001000gis25670_hi.smooth
-> Standard Output From STOOL ascasource:

108 149 0.609229 39 6 7604.77
71 193 0.00308199 17 18 38.9728

-> Smoothing ad10001000gis25670_lo.totsky with ad10001000gis25670.totexpo
-> Clipping exposures below 2615.4346068 seconds
-> Detecting sources in ad10001000gis25670_lo.smooth
-> Standard Output From STOOL ascasource:

108 148 0.0620356 120 8 6934.72

-> Determining extraction radii
-> Eliminating redundant sources
-> Standard Output From STOOL sift_sources:

108 149 24 F
71 193 14 T

-> Sources with radius >= 2

108 149 24 F
71 193 14 T

-> Standard Output From STOOL colorpic:

color plane 0
color plane 1
color plane 2
writing image
image written

-> Creating fits catalog of sources: ad10001000gis25670.src
-> Smoothing ad10001000sis32002_all.totsky with ad10001000sis32002.totexpo
-> Clipping exposures below 269.9148744 seconds
-> Detecting sources in ad10001000sis32002_all.smooth
-> Standard Output From STOOL ascasource:

121 212 0.124978 85 26 116.062

-> Smoothing ad10001000sis32002_hi.totsky with ad10001000sis32002.totexpo
-> Clipping exposures below 269.9148744 seconds
-> Detecting sources in ad10001000sis32002_hi.smooth
-> Standard Output From STOOL ascasource:

118 213 0.11374 84 25 125.19

-> Smoothing ad10001000sis32002_lo.totsky with ad10001000sis32002.totexpo
-> Clipping exposures below 269.9148744 seconds
-> Detecting sources in ad10001000sis32002_lo.smooth
-> Standard Output From STOOL ascasource:

110 211 0.014202 5 6 43.5038
118 206 0.0123496 3 4 78.7592

-> Determining extraction radii
-> Eliminating redundant sources
-> Standard Output From STOOL sift_sources:

121 212 38 T

-> Sources with radius >= 2

121 212 38 T

-> Standard Output From STOOL colorpic:

color plane 0
color plane 1
color plane 2
writing image
image written

-> Creating fits catalog of sources: ad10001000sis32002.src
-> Generating region files
-> Converting (484.0,848.0,2.0) to s0 detector coordinates
-> Using events in: ad10001000s000302h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   44249.000
 The mean of the selected column is                  413.54206
 The standard deviation of the selected column is    1.1917988
 The minimum of selected column is                   411.00000
 The maximum of selected column is                   416.00000
 The number of points used in calculation is              107

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   46408.000
 The mean of the selected column is                  433.71963
 The standard deviation of the selected column is    1.1958607
 The minimum of selected column is                   431.00000
 The maximum of selected column is                   436.00000
 The number of points used in calculation is              107

-> Converting (484.0,848.0,2.0) to s1 detector coordinates
-> Using events in: ad10001000s100302h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   33731.000
 The mean of the selected column is                  411.35366
 The standard deviation of the selected column is    1.1152362
 The minimum of selected column is                   409.00000
 The maximum of selected column is                   413.00000
 The number of points used in calculation is               82

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   38510.000
 The mean of the selected column is                  469.63415
 The standard deviation of the selected column is    1.2815133
 The minimum of selected column is                   467.00000
 The maximum of selected column is                   474.00000
 The number of points used in calculation is               82

-> Converting (108.0,149.0,2.0) to g2 detector coordinates
-> Using events in: ad10001000g200170h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   8224367.0
 The mean of the selected column is                  103.78143
 The standard deviation of the selected column is    1.0527152
 The minimum of selected column is                   101.00000
 The maximum of selected column is                   106.00000
 The number of points used in calculation is            79247

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   8428279.0
 The mean of the selected column is                  106.35455
 The standard deviation of the selected column is    1.1350363
 The minimum of selected column is                   103.00000
 The maximum of selected column is                   110.00000
 The number of points used in calculation is            79247

-> Converting (71.0,193.0,2.0) to g2 detector coordinates
-> Using events in: ad10001000g200170h.evt
-> No photons in 2.0 pixel radius
-> Converting (71.0,193.0,14.0) to g2 detector coordinates
-> Using events in: ad10001000g200170h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   108231.00
 The mean of the selected column is                  65.954296
 The standard deviation of the selected column is    4.4480451
 The minimum of selected column is                   54.000000
 The maximum of selected column is                   74.000000
 The number of points used in calculation is             1641

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   122116.00
 The mean of the selected column is                  74.415600
 The standard deviation of the selected column is    5.1114745
 The minimum of selected column is                   62.000000
 The maximum of selected column is                   84.000000
 The number of points used in calculation is             1641

-> Converting (108.0,149.0,2.0) to g3 detector coordinates
-> Using events in: ad10001000g300170h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   8766377.0
 The mean of the selected column is                  109.75807
 The standard deviation of the selected column is    1.0987511
 The minimum of selected column is                   107.00000
 The maximum of selected column is                   112.00000
 The number of points used in calculation is            79870

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   8548157.0
 The mean of the selected column is                  107.02588
 The standard deviation of the selected column is    1.1150470
 The minimum of selected column is                   104.00000
 The maximum of selected column is                   110.00000
 The number of points used in calculation is            79870

-> Converting (71.0,193.0,2.0) to g3 detector coordinates
-> Using events in: ad10001000g300170h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   6837.0000
 The mean of the selected column is                  65.740385
 The standard deviation of the selected column is    1.0427297
 The minimum of selected column is                   64.000000
 The maximum of selected column is                   68.000000
 The number of points used in calculation is              104

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   7314.0000
 The mean of the selected column is                  70.326923
 The standard deviation of the selected column is    1.0561177
 The minimum of selected column is                   68.000000
 The maximum of selected column is                   73.000000
 The number of points used in calculation is              104

Extracting spectra and generating response matrices (22:12:4)

-> Fetching xrt_ea_v2_0.fits
-> Fetching xrt_psf_v2_0.fits
-> sisph2pi_110397.fits already present in current directory
-> Fetching sisechos_290296.fits
-> Fetching sisrddis_290296.fits
-> Standard Output From STOOL group_event_files:

1 ad10001000s000302h.evt 187723

-> Fetching SIS0_NOTCHIP0.1
-> Fetching SIS0_NOTCHIP2.1
-> Fetching SIS0_NOTCHIP3.1
-> Fetching SIS0_OFFCHIP.2
-> Extracting ad10001000s010102_1.pi from ad10001000s032002_1.reg and:

ad10001000s000302h.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 GX5-1       BRIGHT      HIGH        1993-10-09  04:33:33    0.89E+03   187723 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s000302h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         187723    154653          33070         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        187723    154653          33070         0         0         0
   in  887.72     seconds
 Spectrum         has   154653 counts for  174.2     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 887.72          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.59080E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      13  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10001000s010102_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA > read events ad10001000s000302h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA-SIS0-BRIGHT > set phaname PI
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad10001000s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP0.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.2
!xsel:ASCA-SIS0-BRIGHT > filter region ad10001000s010102.discrim
!xsel:ASCA-SIS0-BRIGHT > extract spectrum
!xsel:ASCA-SIS0-BRIGHT > save spectrum ad10001000s010102_1.pi group=yes
Wrote spectrum to ad10001000s010102_1.pi
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Deleting BLANK keyword from ad10001000s010102_1.pi
-> Grouping ad10001000s010102_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 887.72          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.59080E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      13  of undefined grouping (Channel quality=bad)
 ...        14 -      14  are single channels
 ...        15 -      20  are grouped by a factor        2
 ...        21 -      21  are single channels
 ...        22 -      27  are grouped by a factor        2
 ...        28 -      30  are single channels
 ...        31 -      34  are grouped by a factor        2
 ...        35 -     292  are single channels
 ...       293 -     294  are grouped by a factor        2
 ...       295 -     295  are single channels
 ...       296 -     297  are grouped by a factor        2
 ...       298 -     299  are single channels
 ...       300 -     319  are grouped by a factor        2
 ...       320 -     322  are grouped by a factor        3
 ...       323 -     328  are grouped by a factor        2
 ...       329 -     346  are grouped by a factor        3
 ...       347 -     350  are grouped by a factor        4
 ...       351 -     353  are grouped by a factor        3
 ...       354 -     357  are grouped by a factor        4
 ...       358 -     367  are grouped by a factor        5
 ...       368 -     385  are grouped by a factor        6
 ...       386 -     392  are grouped by a factor        7
 ...       393 -     400  are grouped by a factor        8
 ...       401 -     412  are grouped by a factor       12
 ...       413 -     429  are grouped by a factor       17
 ...       430 -     450  are grouped by a factor       21
 ...       451 -     482  are grouped by a factor       32
 ...       483 -     511  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10001000s010102_1.pi
 ** grppha 2.9.0 completed successfully

-> Source occupies chip(s) 1
-> Fetching sis0c1p40_290296.fits
-> Generating ad10001000s010102_1.rmf
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x512 S0C1 Bright PI RMF
Calibration data files:
  ecd = ./sis0c1p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.

-> Generating ad10001000s010102_1.arf with point=no
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   38 by   38 bins
               expanded to   38 by   38 bins
 First WMAP bin is at detector pixel  264  280
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   52.900     arcmin^2
 Optical axis is detector pixel 662.72 559.02
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 1.54242E+05
 Weighted mean angle from optical axis  =  7.289 arcmin

-> Standard Output From STOOL group_event_files:

1 ad10001000s100302h.evt 157819

-> Fetching SIS1_NOTCHIP0.1
-> Fetching SIS1_NOTCHIP1.1
-> Fetching SIS1_NOTCHIP2.1
-> Fetching SIS1_OFFCHIP.2
-> Extracting ad10001000s110102_1.pi from ad10001000s132002_1.reg and:

ad10001000s100302h.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 GX5-1       BRIGHT      HIGH        1993-10-09  04:33:33    0.91E+03   157819 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s100302h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         157819    134772          23047         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        157819    134772          23047         0         0         0
   in  911.72     seconds
 Spectrum         has   134772 counts for  147.8     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 911.72          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.59080E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      13  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10001000s110102_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA > read events ad10001000s100302h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA-SIS1-BRIGHT > set phaname PI
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad10001000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.2
!xsel:ASCA-SIS1-BRIGHT > filter region ad10001000s110102.discrim
!xsel:ASCA-SIS1-BRIGHT > extract spectrum
!xsel:ASCA-SIS1-BRIGHT > save spectrum ad10001000s110102_1.pi group=yes
Wrote spectrum to ad10001000s110102_1.pi
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Deleting BLANK keyword from ad10001000s110102_1.pi
-> Grouping ad10001000s110102_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 911.72          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.59080E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      13  of undefined grouping (Channel quality=bad)
 ...        14 -      35  are grouped by a factor        2
 ...        36 -     272  are single channels
 ...       273 -     278  are grouped by a factor        2
 ...       279 -     281  are single channels
 ...       282 -     283  are grouped by a factor        2
 ...       284 -     286  are single channels
 ...       287 -     292  are grouped by a factor        2
 ...       293 -     293  are single channels
 ...       294 -     321  are grouped by a factor        2
 ...       322 -     324  are grouped by a factor        3
 ...       325 -     328  are grouped by a factor        2
 ...       329 -     331  are grouped by a factor        3
 ...       332 -     335  are grouped by a factor        4
 ...       336 -     338  are grouped by a factor        3
 ...       339 -     346  are grouped by a factor        4
 ...       347 -     349  are grouped by a factor        3
 ...       350 -     354  are grouped by a factor        5
 ...       355 -     366  are grouped by a factor        6
 ...       367 -     370  are grouped by a factor        4
 ...       371 -     377  are grouped by a factor        7
 ...       378 -     385  are grouped by a factor        8
 ...       386 -     392  are grouped by a factor        7
 ...       393 -     403  are grouped by a factor       11
 ...       404 -     415  are grouped by a factor       12
 ...       416 -     431  are grouped by a factor       16
 ...       432 -     448  are grouped by a factor       17
 ...       449 -     511  are grouped by a factor       63
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10001000s110102_1.pi
 ** grppha 2.9.0 completed successfully

-> Source occupies chip(s) 3
-> Fetching sis1c3p40_290296.fits
-> Generating ad10001000s110102_1.rmf
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x512 S1C3 Bright PI RMF
Calibration data files:
  ecd = ./sis1c3p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.

-> Generating ad10001000s110102_1.arf with point=no
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   38 by   38 bins
               expanded to   38 by   38 bins
 First WMAP bin is at detector pixel  264  320
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   52.900     arcmin^2
 Optical axis is detector pixel 618.28 773.83
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 1.34445E+05
 Weighted mean angle from optical axis  =  9.871 arcmin

-> Standard Output From STOOL group_event_files:

1 ad10001000g200170h.evt 912286
1 ad10001000g200270m.evt 912286

-> GIS2_REGION256.4 already present in current directory
-> Extracting ad10001000g210170_1.pi from ad10001000g225670_1.reg and:

ad10001000g200170h.evt
ad10001000g200270m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          HIGH        1993-10-09  04:33:45    0.81E+04   902385     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          MEDIUM      1993-10-09  03:33:13    0.64E+03     9901     1024
      2 GX5-1       PH          HIGH        1993-10-09  04:33:45    0.81E+04   902385     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         902385    743592         158793         0         0         0
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           9901      8114           1787         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        912286    751706         160580         0         0         0
   in  8718.1     seconds
 Spectrum         has   751706 counts for  86.22     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 8718.1          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10001000g210170_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA > read events ad10001000g200170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA-GIS2-PH > read events ad10001000g200270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA-GIS2-PH > set phaname PI
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad10001000g225670_1.reg
!xsel:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!xsel:ASCA-GIS2-PH > extract spectrum
!xsel:ASCA-GIS2-PH > save spectrum ad10001000g210170_1.pi group=yes
Wrote spectrum to ad10001000g210170_1.pi
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Deleting BLANK keyword from ad10001000g210170_1.pi
-> Correcting ad10001000g210170_1.pi for dead time
-> Standard Output From FTOOL deadtime:

... read all the files from deadlist.tmp

-> Grouping ad10001000g210170_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 4011.2          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - TRUE            Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      18  are grouped by a factor       19
 ...        19 -     759  are single channels
 ...       760 -     765  are grouped by a factor        2
 ...       766 -     766  are single channels
 ...       767 -     768  are grouped by a factor        2
 ...       769 -     771  are single channels
 ...       772 -     773  are grouped by a factor        2
 ...       774 -     775  are single channels
 ...       776 -     777  are grouped by a factor        2
 ...       778 -     778  are single channels
 ...       779 -     782  are grouped by a factor        2
 ...       783 -     783  are single channels
 ...       784 -     825  are grouped by a factor        2
 ...       826 -     840  are grouped by a factor        3
 ...       841 -     842  are grouped by a factor        2
 ...       843 -     848  are grouped by a factor        3
 ...       849 -     850  are grouped by a factor        2
 ...       851 -     859  are grouped by a factor        3
 ...       860 -     863  are grouped by a factor        4
 ...       864 -     866  are grouped by a factor        3
 ...       867 -     870  are grouped by a factor        4
 ...       871 -     875  are grouped by a factor        5
 ...       876 -     883  are grouped by a factor        4
 ...       884 -     886  are grouped by a factor        3
 ...       887 -     896  are grouped by a factor        5
 ...       897 -     900  are grouped by a factor        4
 ...       901 -     905  are grouped by a factor        5
 ...       906 -     911  are grouped by a factor        6
 ...       912 -     916  are grouped by a factor        5
 ...       917 -     933  are grouped by a factor       17
 ...       934 -    1023  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10001000g210170_1.pi
 ** grppha 2.9.0 completed successfully

-> Fetching gis2v4_0.rmf
-> Fetching s2bev1.fits
-> Fetching s2gridv3.fits
-> Generating ad10001000g210170_1.arf with point=yes
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   48 by   48 bins
               expanded to  128 by  128 bins
 First WMAP bin is at detector pixel   41   43
   1 detector pixels per WMAP bin
 WMAP bin size is   0.25000 mm
                    0.24555 arcmin
 Selected region size is   114.65     arcmin^2
 Optical axis is detector pixel 133.00 130.96
 
  201 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Point source at  103.50  105.50 (detector coordinates)
 Point source at   29.50   25.46 (WMAP bins wrt optical axis)
 Point source at    9.57   40.80 (... in polar coordinates)
 
 Total counts in region = 7.49936E+05
 Weighted mean angle from optical axis  =  9.310 arcmin

-> Extracting ad10001000g210170_2.pi from ad10001000g225670_2.reg and:

ad10001000g200170h.evt
ad10001000g200270m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          HIGH        1993-10-09  04:33:45    0.81E+04   902385     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          MEDIUM      1993-10-09  03:33:13    0.64E+03     9901     1024
      2 GX5-1       PH          HIGH        1993-10-09  04:33:45    0.81E+04   902385     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         902385      4367         898018         0         0         0
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           9901        55           9846         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        912286      4422         907864         0         0         0
   in  8718.1     seconds
 Spectrum         has     4422 counts for 0.5072     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 8718.1          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 7.52300E-03     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10001000g210170_2.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA > read events ad10001000g200170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA-GIS2-PH > read events ad10001000g200270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA-GIS2-PH > set phaname PI
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad10001000g225670_2.reg
!xsel:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!xsel:ASCA-GIS2-PH > extract spectrum
!xsel:ASCA-GIS2-PH > save spectrum ad10001000g210170_2.pi group=yes
Wrote spectrum to ad10001000g210170_2.pi
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Deleting BLANK keyword from ad10001000g210170_2.pi
-> Correcting ad10001000g210170_2.pi for dead time
-> Standard Output From FTOOL deadtime:

... read all the files from deadlist.tmp

-> Grouping ad10001000g210170_2.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 4011.2          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 7.52300E-03     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - TRUE            Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      73  are grouped by a factor       74
 ...        74 -     102  are grouped by a factor       29
 ...       103 -     118  are grouped by a factor       16
 ...       119 -     128  are grouped by a factor       10
 ...       129 -     136  are grouped by a factor        8
 ...       137 -     142  are grouped by a factor        6
 ...       143 -     147  are grouped by a factor        5
 ...       148 -     153  are grouped by a factor        6
 ...       154 -     165  are grouped by a factor        4
 ...       166 -     168  are grouped by a factor        3
 ...       169 -     178  are grouped by a factor        5
 ...       179 -     184  are grouped by a factor        3
 ...       185 -     188  are grouped by a factor        4
 ...       189 -     191  are grouped by a factor        3
 ...       192 -     199  are grouped by a factor        4
 ...       200 -     214  are grouped by a factor        5
 ...       215 -     217  are grouped by a factor        3
 ...       218 -     237  are grouped by a factor        4
 ...       238 -     249  are grouped by a factor        3
 ...       250 -     253  are grouped by a factor        4
 ...       254 -     258  are grouped by a factor        5
 ...       259 -     278  are grouped by a factor        4
 ...       279 -     281  are grouped by a factor        3
 ...       282 -     285  are grouped by a factor        4
 ...       286 -     288  are grouped by a factor        3
 ...       289 -     292  are grouped by a factor        4
 ...       293 -     297  are grouped by a factor        5
 ...       298 -     301  are grouped by a factor        4
 ...       302 -     304  are grouped by a factor        3
 ...       305 -     312  are grouped by a factor        4
 ...       313 -     315  are grouped by a factor        3
 ...       316 -     331  are grouped by a factor        4
 ...       332 -     334  are grouped by a factor        3
 ...       335 -     354  are grouped by a factor        4
 ...       355 -     359  are grouped by a factor        5
 ...       360 -     363  are grouped by a factor        4
 ...       364 -     368  are grouped by a factor        5
 ...       369 -     372  are grouped by a factor        4
 ...       373 -     387  are grouped by a factor        5
 ...       388 -     391  are grouped by a factor        4
 ...       392 -     396  are grouped by a factor        5
 ...       397 -     400  are grouped by a factor        4
 ...       401 -     405  are grouped by a factor        5
 ...       406 -     409  are grouped by a factor        4
 ...       410 -     415  are grouped by a factor        6
 ...       416 -     420  are grouped by a factor        5
 ...       421 -     427  are grouped by a factor        7
 ...       428 -     439  are grouped by a factor        6
 ...       440 -     446  are grouped by a factor        7
 ...       447 -     470  are grouped by a factor        8
 ...       471 -     476  are grouped by a factor        6
 ...       477 -     483  are grouped by a factor        7
 ...       484 -     492  are grouped by a factor        9
 ...       493 -     500  are grouped by a factor        8
 ...       501 -     509  are grouped by a factor        9
 ...       510 -     529  are grouped by a factor       10
 ...       530 -     542  are grouped by a factor       13
 ...       543 -     557  are grouped by a factor       15
 ...       558 -     568  are grouped by a factor       11
 ...       569 -     584  are grouped by a factor       16
 ...       585 -     598  are grouped by a factor       14
 ...       599 -     616  are grouped by a factor       18
 ...       617 -     640  are grouped by a factor       24
 ...       641 -     666  are grouped by a factor       26
 ...       667 -     695  are grouped by a factor       29
 ...       696 -     729  are grouped by a factor       34
 ...       730 -     788  are grouped by a factor       59
 ...       789 -    1023  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10001000g210170_2.pi
 ** grppha 2.9.0 completed successfully

-> gis2v4_0.rmf already present in current directory
-> s2bev1.fits already present in current directory
-> s2gridv3.fits already present in current directory
-> Generating ad10001000g210170_2.arf with point=no
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   26 by   27 bins
               expanded to   64 by   64 bins
 First WMAP bin is at detector pixel   36   44
   1 detector pixels per WMAP bin
 WMAP bin size is   0.25000 mm
                    0.24555 arcmin
 Selected region size is   29.733     arcmin^2
 Optical axis is detector pixel 133.00 130.96
 
  201 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 4.24300E+03
 Weighted mean angle from optical axis  = 20.838 arcmin

-> Standard Output From STOOL group_event_files:

1 ad10001000g300170h.evt 942042
1 ad10001000g300270m.evt 942042

-> GIS3_REGION256.4 already present in current directory
-> Extracting ad10001000g310170_1.pi from ad10001000g325670_1.reg and:

ad10001000g300170h.evt
ad10001000g300270m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          HIGH        1993-10-09  04:33:45    0.81E+04   932121     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          MEDIUM      1993-10-09  03:33:13    0.64E+03     9921     1024
      2 GX5-1       PH          HIGH        1993-10-09  04:33:45    0.81E+04   932121     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         932121    783185         148936         0         0         0
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           9921      8317           1604         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        942042    791502         150540         0         0         0
   in  8718.1     seconds
 Spectrum         has   791502 counts for  90.79     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 8718.1          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10001000g310170_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA > read events ad10001000g300170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA-GIS3-PH > read events ad10001000g300270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA-GIS3-PH > set phaname PI
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad10001000g325670_1.reg
!xsel:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!xsel:ASCA-GIS3-PH > extract spectrum
!xsel:ASCA-GIS3-PH > save spectrum ad10001000g310170_1.pi group=yes
Wrote spectrum to ad10001000g310170_1.pi
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Deleting BLANK keyword from ad10001000g310170_1.pi
-> Correcting ad10001000g310170_1.pi for dead time
-> Standard Output From FTOOL deadtime:

... read all the files from deadlist.tmp

-> Grouping ad10001000g310170_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 3451.3          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - TRUE            Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      19  are grouped by a factor       20
 ...        20 -     772  are single channels
 ...       773 -     774  are grouped by a factor        2
 ...       775 -     776  are single channels
 ...       777 -     778  are grouped by a factor        2
 ...       779 -     779  are single channels
 ...       780 -     781  are grouped by a factor        2
 ...       782 -     784  are single channels
 ...       785 -     786  are grouped by a factor        2
 ...       787 -     788  are single channels
 ...       789 -     792  are grouped by a factor        2
 ...       793 -     793  are single channels
 ...       794 -     795  are grouped by a factor        2
 ...       796 -     796  are single channels
 ...       797 -     830  are grouped by a factor        2
 ...       831 -     839  are grouped by a factor        3
 ...       840 -     843  are grouped by a factor        2
 ...       844 -     846  are grouped by a factor        3
 ...       847 -     848  are grouped by a factor        2
 ...       849 -     863  are grouped by a factor        3
 ...       864 -     865  are grouped by a factor        2
 ...       866 -     874  are grouped by a factor        3
 ...       875 -     882  are grouped by a factor        4
 ...       883 -     891  are grouped by a factor        3
 ...       892 -     899  are grouped by a factor        4
 ...       900 -     909  are grouped by a factor        5
 ...       910 -     913  are grouped by a factor        4
 ...       914 -     923  are grouped by a factor        5
 ...       924 -     941  are grouped by a factor        6
 ...       942 -    1023  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10001000g310170_1.pi
 ** grppha 2.9.0 completed successfully

-> Fetching gis3v4_0.rmf
-> Fetching s3bev1.fits
-> Fetching s3gridv3.fits
-> Generating ad10001000g310170_1.arf with point=yes
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   48 by   48 bins
               expanded to  128 by  128 bins
 First WMAP bin is at detector pixel   47   44
   1 detector pixels per WMAP bin
 WMAP bin size is   0.25000 mm
                    0.24555 arcmin
 Selected region size is   114.65     arcmin^2
 Optical axis is detector pixel 119.36 134.44
 
  201 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Point source at  109.50  106.50 (detector coordinates)
 Point source at    9.86   27.94 (WMAP bins wrt optical axis)
 Point source at    7.28   70.56 (... in polar coordinates)
 
 Total counts in region = 7.90008E+05
 Weighted mean angle from optical axis  =  7.158 arcmin

-> Extracting ad10001000g310170_2.pi from ad10001000g325670_2.reg and:

ad10001000g300170h.evt
ad10001000g300270m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          HIGH        1993-10-09  04:33:45    0.81E+04   932121     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          MEDIUM      1993-10-09  03:33:13    0.64E+03     9921     1024
      2 GX5-1       PH          HIGH        1993-10-09  04:33:45    0.81E+04   932121     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         932121      2902         929219         0         0         0
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           9921        28           9893         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        942042      2930         939112         0         0         0
   in  8718.1     seconds
 Spectrum         has     2930 counts for 0.3361     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 8718.1          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 6.34800E-03     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10001000g310170_2.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA > read events ad10001000g300170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA-GIS3-PH > read events ad10001000g300270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA-GIS3-PH > set phaname PI
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad10001000g325670_2.reg
!xsel:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!xsel:ASCA-GIS3-PH > extract spectrum
!xsel:ASCA-GIS3-PH > save spectrum ad10001000g310170_2.pi group=yes
Wrote spectrum to ad10001000g310170_2.pi
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Deleting BLANK keyword from ad10001000g310170_2.pi
-> Correcting ad10001000g310170_2.pi for dead time
-> Standard Output From FTOOL deadtime:

... read all the files from deadlist.tmp

-> Grouping ad10001000g310170_2.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 3451.3          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 6.34800E-03     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - TRUE            Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      95  are grouped by a factor       96
 ...        96 -     122  are grouped by a factor       27
 ...       123 -     134  are grouped by a factor       12
 ...       135 -     145  are grouped by a factor       11
 ...       146 -     155  are grouped by a factor       10
 ...       156 -     164  are grouped by a factor        9
 ...       165 -     170  are grouped by a factor        6
 ...       171 -     175  are grouped by a factor        5
 ...       176 -     187  are grouped by a factor        6
 ...       188 -     192  are grouped by a factor        5
 ...       193 -     204  are grouped by a factor        6
 ...       205 -     211  are grouped by a factor        7
 ...       212 -     216  are grouped by a factor        5
 ...       217 -     225  are grouped by a factor        9
 ...       226 -     243  are grouped by a factor        6
 ...       244 -     248  are grouped by a factor        5
 ...       249 -     260  are grouped by a factor        6
 ...       261 -     265  are grouped by a factor        5
 ...       266 -     273  are grouped by a factor        4
 ...       274 -     285  are grouped by a factor        6
 ...       286 -     300  are grouped by a factor        5
 ...       301 -     318  are grouped by a factor        6
 ...       319 -     325  are grouped by a factor        7
 ...       326 -     331  are grouped by a factor        6
 ...       332 -     336  are grouped by a factor        5
 ...       337 -     343  are grouped by a factor        7
 ...       344 -     348  are grouped by a factor        5
 ...       349 -     354  are grouped by a factor        6
 ...       355 -     359  are grouped by a factor        5
 ...       360 -     365  are grouped by a factor        6
 ...       366 -     380  are grouped by a factor        5
 ...       381 -     387  are grouped by a factor        7
 ...       388 -     393  are grouped by a factor        6
 ...       394 -     400  are grouped by a factor        7
 ...       401 -     405  are grouped by a factor        5
 ...       406 -     411  are grouped by a factor        6
 ...       412 -     419  are grouped by a factor        8
 ...       420 -     426  are grouped by a factor        7
 ...       427 -     435  are grouped by a factor        9
 ...       436 -     443  are grouped by a factor        8
 ...       444 -     452  are grouped by a factor        9
 ...       453 -     476  are grouped by a factor       12
 ...       477 -     484  are grouped by a factor        8
 ...       485 -     497  are grouped by a factor       13
 ...       498 -     511  are grouped by a factor       14
 ...       512 -     528  are grouped by a factor       17
 ...       529 -     564  are grouped by a factor       18
 ...       565 -     583  are grouped by a factor       19
 ...       584 -     607  are grouped by a factor       24
 ...       608 -     637  are grouped by a factor       30
 ...       638 -     680  are grouped by a factor       43
 ...       681 -     724  are grouped by a factor       44
 ...       725 -     784  are grouped by a factor       60
 ...       785 -    1023  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10001000g310170_2.pi
 ** grppha 2.9.0 completed successfully

-> gis3v4_0.rmf already present in current directory
-> s3bev1.fits already present in current directory
-> s3gridv3.fits already present in current directory
-> Generating ad10001000g310170_2.arf with point=no
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   25 by   25 bins
               expanded to   64 by   64 bins
 First WMAP bin is at detector pixel   37   41
   1 detector pixels per WMAP bin
 WMAP bin size is   0.25000 mm
                    0.24555 arcmin
 Selected region size is   25.089     arcmin^2
 Optical axis is detector pixel 119.36 134.44
 
  201 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 2.82200E+03
 Weighted mean angle from optical axis  = 19.610 arcmin

-> Plotting ad10001000g210170_1_pi.ps from ad10001000g210170_1.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 23:11:41 14-Aug-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad10001000g210170_1.pi;
 Net count rate (cts/s) for file   1   187.4    +/-  0.2162
   using response (RMF) file...       gis2v4_0.rmf
   using auxiliary (ARF) file...      ad10001000g210170_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Plotting ad10001000g210170_2_pi.ps from ad10001000g210170_2.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 23:12:07 14-Aug-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad10001000g210170_2.pi;
 Net count rate (cts/s) for file   1   1.102    +/-  1.6976E-02
   using response (RMF) file...       gis2v4_0.rmf
   using auxiliary (ARF) file...      ad10001000g210170_2.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Plotting ad10001000g310170_1_pi.ps from ad10001000g310170_1.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 23:12:32 14-Aug-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad10001000g310170_1.pi;
 Net count rate (cts/s) for file   1   229.3    +/-  0.2578
   using response (RMF) file...       gis3v4_0.rmf
   using auxiliary (ARF) file...      ad10001000g310170_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Plotting ad10001000g310170_2_pi.ps from ad10001000g310170_2.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 23:12:57 14-Aug-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad10001000g310170_2.pi;
 Net count rate (cts/s) for file   1  0.8490    +/-  1.6226E-02
   using response (RMF) file...       gis3v4_0.rmf
   using auxiliary (ARF) file...      ad10001000g310170_2.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Plotting ad10001000s010102_1_pi.ps from ad10001000s010102_1.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 23:13:21 14-Aug-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad10001000s010102_1.pi;
 Net count rate (cts/s) for file   1   174.2    +/-  0.4430
   using response (RMF) file...       ad10001000s010102_1.rmf
   using auxiliary (ARF) file...      ad10001000s010102_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Plotting ad10001000s110102_1_pi.ps from ad10001000s110102_1.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 23:13:47 14-Aug-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad10001000s110102_1.pi;
 Net count rate (cts/s) for file   1   147.8    +/-  0.4027
   using response (RMF) file...       ad10001000s110102_1.rmf
   using auxiliary (ARF) file...      ad10001000s110102_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

Extracting light curves (23:13:55)

-> Working on s0 mode 02
-> Extracting lightcurves from ad10001000s000302h.evt
-> Largest TIMEDEL=4.0000000E+00
-> Extracting event file filtered with ad10001000s032002_1.reg
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad10001000s000302h.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
         187723    154653          33070         0         0         0
 Writing events file
 154653 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        187723    154653          33070         0         0         0
   in  887.72     seconds

-> Extracting ad10001000s032002_1.lc with binsize 4.0000000E+00
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: lightcurve_filtered_events.tmp
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
         154653    154653              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        154653    154653              0         0         0         0
   in  887.72     seconds
 Fits light curve has   154653 counts for  174.2     counts/sec

-> Working on s0 mode 03
-> Extracting lightcurves from ad10001000s000103h.evt ad10001000s000803h.evt
-> Largest TIMEDEL=4.0000000E+00
-> Extracting ad10001000s000003_0.lc from full field of view
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad10001000s000103h.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
        3619684   3619684              0         0         0         0
 Doing file: ad10001000s000803h.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
           1002      1002              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
       3620686   3620686              0         0         0         0
   in  14575.     seconds
 Fits light curve has  3620686 counts for  248.4     counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone

-> Working on s1 mode 02
-> Extracting lightcurves from ad10001000s100302h.evt
-> Largest TIMEDEL=4.0000000E+00
-> Extracting event file filtered with ad10001000s132002_1.reg
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad10001000s100302h.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
         157819    134772          23047         0         0         0
 Writing events file
 134772 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        157819    134772          23047         0         0         0
   in  911.72     seconds

-> Extracting ad10001000s132002_1.lc with binsize 4.0000000E+00
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: lightcurve_filtered_events.tmp
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
         134772    134772              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        134772    134772              0         0         0         0
   in  911.72     seconds
 Fits light curve has   134772 counts for  147.8     counts/sec

-> Working on s1 mode 03
-> Extracting lightcurves from ad10001000s100103h.evt
-> Largest TIMEDEL=4.0000000E+00
-> Extracting ad10001000s100003_0.lc from full field of view
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad10001000s100103h.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
        3725545   3725545              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
       3725545   3725545              0         0         0         0
   in  14350.     seconds
 Fits light curve has  3725545 counts for  259.6     counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone

-> Working on g2 mode 70
-> Extracting lightcurves from ad10001000g200170h.evt ad10001000g200270m.evt
-> Largest TIMEDEL=5.0000000E-01
-> Extracting event file filtered with ad10001000g225670_1.reg
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad10001000g200170h.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
         902385    743592         158793         0         0         0
 Writing events file
 743592 events written to the output file
 Doing file: ad10001000g200270m.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
           9901      8114           1787         0         0         0
 Writing events file
 751706 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        912286    751706         160580         0         0         0
   in  8718.1     seconds

-> Extracting ad10001000g225670_1.lc with binsize 0.579888662996029
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: lightcurve_filtered_events.tmp
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
         751706    751706              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        751706    751706              0         0         0         0
   in  8718.1     seconds
 Fits light curve has   751706 counts for  86.22     counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone

-> Extracting event file filtered with ad10001000g225670_2.reg
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad10001000g200170h.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
         902385      4367         898018         0         0         0
 Writing events file
   4367 events written to the output file
 Doing file: ad10001000g200270m.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
           9901        55           9846         0         0         0
 Writing events file
   4422 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        912286      4422         907864         0         0         0
   in  8718.1     seconds

-> Extracting ad10001000g225670_2.lc with binsize 98.5766140447971
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: lightcurve_filtered_events.tmp
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
           4422      4422              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4422      4422              0         0         0         0
   in  8718.1     seconds
 Fits light curve has     4422 counts for 0.5072     counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone

-> No files for g2 mode 71
-> Working on g3 mode 70
-> Extracting lightcurves from ad10001000g300170h.evt ad10001000g300270m.evt
-> Largest TIMEDEL=5.0000000E-01
-> Extracting event file filtered with ad10001000g325670_1.reg
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad10001000g300170h.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
         932121    783185         148936         0         0         0
 Writing events file
 783185 events written to the output file
 Doing file: ad10001000g300270m.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
           9921      8317           1604         0         0         0
 Writing events file
 791502 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        942042    791502         150540         0         0         0
   in  8718.1     seconds

-> Extracting ad10001000g325670_1.lc with binsize 0.550732388934068
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: lightcurve_filtered_events.tmp
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
         791502    791502              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        791502    791502              0         0         0         0
   in  8718.1     seconds
 Fits light curve has   791502 counts for  90.79     counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone

-> Extracting event file filtered with ad10001000g325670_2.reg
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad10001000g300170h.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
         932121      2902         929219         0         0         0
 Writing events file
   2902 events written to the output file
 Doing file: ad10001000g300270m.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
           9921        28           9893         0         0         0
 Writing events file
   2930 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        942042      2930         939112         0         0         0
   in  8718.1     seconds

-> Extracting ad10001000g325670_2.lc with binsize 148.773306247813
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: lightcurve_filtered_events.tmp
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
           2930      2930              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2930      2930              0         0         0         0
   in  8718.1     seconds
 Fits light curve has     2930 counts for 0.3361     counts/sec
 Thresholding removed significant counts
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone

-> No files for g3 mode 71
-> Plotting all lightcurves
-> Plotting ad10001000g225670_1.lc in ad10001000g225670_1_lc.ps
-> stdout output from lcurve

 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad10001000g225670_1.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ GX5-1               Start Time (d) ....  9269 03:46:17.609
 FITS Extension ....  1 - `RATE      `   Stop Time (d) .....  9269 16:01:13.609
 No. of Rows .......        15037        Bin Time (s) ......   0.5799
 Right Ascension ... 2.7020E+02          Internal time sys.. Converted to TJD
 Declination ....... -2.5160E+01         Experiment ........ ASCA     GIS2
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ...  9269.15714825428  (days)       3:46:17:609  (h:m:s:ms)
 Expected Stop ....  9269.66751862465  (days)      16: 1:13:609  (h:m:s:ms)
 
 Minimum Newbin Time   0.57988866      (s)
 for Maximum Newbin No..            76043
 
 Default Newbin Time is:   86.226046    (s) (to have 1 Intv. of     512 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     86.226046      (s)
 Maximum Newbin No.               512
 
 Default Newbins per Interval are:       512
 (giving       1 Interval of       512 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       512 Newbins of       86.2260     (s)
 
     512 analysis results per interval
 
  1% completed
  2% completed
  3% completed
  4% completed
  5% completed
  6% completed
  7% completed
  8% completed
  9% completed
 10% completed
 11% completed
 12% completed
 13% completed
 14% completed
 15% completed
 16% completed
 17% completed
 18% completed
 19% completed
 20% completed
 21% completed
 22% completed
 23% completed
 24% completed
 25% completed
 26% completed
 27% completed
 28% completed
 29% completed
 30% completed
 31% completed
 32% completed
 33% completed
 34% completed
 35% completed
 36% completed
 37% completed
 38% completed
 39% completed
 40% completed
 41% completed
 42% completed
 43% completed
 44% completed
 45% completed
 46% completed
 47% completed
 48% completed
 49% completed
 50% completed
 51% completed
 52% completed
 53% completed
 54% completed
 55% completed
 56% completed
 57% completed
 58% completed
 59% completed
 60% completed
 61% completed
 62% completed
 63% completed
 64% completed
 65% completed
 66% completed
 67% completed
 68% completed
 69% completed
 70% completed
 71% completed
 72% completed
 73% completed
 74% completed
 75% completed
 76% completed
 77% completed
 78% completed
 79% completed
 80% completed
 81% completed
 82% completed
 83% completed
 84% completed
 85% completed
 86% completed
 87% completed
 88% completed
 89% completed
 90% completed
 91% completed
 92% completed
 93% completed
 94% completed
 95% completed
 96% completed
 97% completed
 98% completed
 99% completed
100% completed
 
 Intv    1   Start  9269  3:47: 0
     Ser.1     Avg  85.49        Chisq 0.3611E+05   Var  479.2     Newbs.    109
               Min  11.87          Max  93.90    expVar  1.285      Bins  15037
PLT> @lightcurve_plot_commands.tmp
!PLT> dev ad10001000g225670_1_lc.ps/ps
!PLT> LA File ad10001000g225670_1.lc
!PLT> plot
!PLT> quit

-> Plotting ad10001000g225670_2.lc in ad10001000g225670_2_lc.ps
-> stdout output from lcurve

 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad10001000g225670_2.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ GX5-1               Start Time (d) ....  9269 03:46:17.609
 FITS Extension ....  1 - `RATE      `   Stop Time (d) .....  9269 16:01:13.609
 No. of Rows .......           88        Bin Time (s) ......    98.58
 Right Ascension ... 2.7020E+02          Internal time sys.. Converted to TJD
 Declination ....... -2.5160E+01         Experiment ........ ASCA     GIS2
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ...  9269.15714825428  (days)       3:46:17:609  (h:m:s:ms)
 Expected Stop ....  9269.66751862465  (days)      16: 1:13:609  (h:m:s:ms)
 
 Minimum Newbin Time    98.576614      (s)
 for Maximum Newbin No..              448
 
 Default Newbin Time is:   98.576614    (s) (to have 1 Intv. of     448 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     98.576614      (s)
 Maximum Newbin No.               448
 
 Default Newbins per Interval are:       448
 (giving       1 Interval of       448 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       448 Newbins of       98.5766     (s)
 
     448 analysis results per interval
 
  1% completed
  2% completed
  3% completed
  4% completed
  5% completed
  6% completed
  7% completed
  9% completed
 10% completed
 11% completed
 12% completed
 13% completed
 14% completed
 15% completed
 17% completed
 18% completed
 19% completed
 20% completed
 21% completed
 22% completed
 23% completed
 25% completed
 26% completed
 27% completed
 28% completed
 29% completed
 30% completed
 31% completed
 32% completed
 34% completed
 35% completed
 36% completed
 37% completed
 38% completed
 39% completed
 40% completed
 42% completed
 43% completed
 44% completed
 45% completed
 46% completed
 47% completed
 48% completed
 50% completed
 51% completed
 52% completed
 53% completed
 54% completed
 55% completed
 56% completed
 57% completed
 59% completed
 60% completed
 61% completed
 62% completed
 63% completed
 64% completed
 65% completed
 67% completed
 68% completed
 69% completed
 70% completed
 71% completed
 72% completed
 73% completed
 75% completed
 76% completed
 77% completed
 78% completed
 79% completed
 80% completed
 81% completed
 82% completed
 84% completed
 85% completed
 86% completed
 87% completed
 88% completed
 89% completed
 90% completed
 92% completed
 93% completed
 94% completed
 95% completed
 96% completed
 97% completed
 98% completed
100% completed
 
 Intv    1   Start  9269  3:47: 6
     Ser.1     Avg 0.5071        Chisq  306.6       Var 0.2097E-01 Newbs.     88
               Min 0.5869E-01      Max 0.7591    expVar 0.5397E-02  Bins     88
PLT> @lightcurve_plot_commands.tmp
!PLT> dev ad10001000g225670_2_lc.ps/ps
!PLT> LA File ad10001000g225670_2.lc
!PLT> plot
!PLT> quit

-> Plotting ad10001000g325670_1.lc in ad10001000g325670_1_lc.ps
-> stdout output from lcurve

 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad10001000g325670_1.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ GX5-1               Start Time (d) ....  9269 03:46:17.609
 FITS Extension ....  1 - `RATE      `   Stop Time (d) .....  9269 16:01:13.609
 No. of Rows .......        15829        Bin Time (s) ......   0.5507
 Right Ascension ... 2.7020E+02          Internal time sys.. Converted to TJD
 Declination ....... -2.5160E+01         Experiment ........ ASCA     GIS3
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ...  9269.15714825428  (days)       3:46:17:609  (h:m:s:ms)
 Expected Stop ....  9269.66751862465  (days)      16: 1:13:609  (h:m:s:ms)
 
 Minimum Newbin Time   0.55073239      (s)
 for Maximum Newbin No..            80068
 
 Default Newbin Time is:   86.226046    (s) (to have 1 Intv. of     512 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     86.226046      (s)
 Maximum Newbin No.               512
 
 Default Newbins per Interval are:       512
 (giving       1 Interval of       512 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       512 Newbins of       86.2260     (s)
 
     512 analysis results per interval
 
  1% completed
  2% completed
  3% completed
  4% completed
  5% completed
  6% completed
  7% completed
  8% completed
  9% completed
 10% completed
 11% completed
 12% completed
 13% completed
 14% completed
 15% completed
 16% completed
 17% completed
 18% completed
 19% completed
 20% completed
 21% completed
 22% completed
 23% completed
 24% completed
 25% completed
 26% completed
 27% completed
 28% completed
 29% completed
 30% completed
 31% completed
 32% completed
 33% completed
 34% completed
 35% completed
 36% completed
 37% completed
 38% completed
 39% completed
 40% completed
 41% completed
 42% completed
 43% completed
 44% completed
 45% completed
 46% completed
 47% completed
 48% completed
 49% completed
 50% completed
 51% completed
 52% completed
 53% completed
 54% completed
 55% completed
 56% completed
 57% completed
 58% completed
 59% completed
 60% completed
 61% completed
 62% completed
 63% completed
 64% completed
 65% completed
 66% completed
 67% completed
 68% completed
 69% completed
 70% completed
 71% completed
 72% completed
 73% completed
 74% completed
 75% completed
 76% completed
 77% completed
 78% completed
 79% completed
 80% completed
 81% completed
 82% completed
 83% completed
 84% completed
 85% completed
 86% completed
 87% completed
 88% completed
 89% completed
 90% completed
 91% completed
 92% completed
 93% completed
 94% completed
 95% completed
 96% completed
 97% completed
 98% completed
 99% completed
100% completed
 
 Intv    1   Start  9269  3:47: 0
     Ser.1     Avg  90.04        Chisq 0.3811E+05   Var  534.9     Newbs.    109
               Min  12.85          Max  98.94    expVar  1.361      Bins  15829
PLT> @lightcurve_plot_commands.tmp
!PLT> dev ad10001000g325670_1_lc.ps/ps
!PLT> LA File ad10001000g325670_1.lc
!PLT> plot
!PLT> quit

-> Plotting ad10001000g325670_2.lc in ad10001000g325670_2_lc.ps
-> stdout output from lcurve

 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad10001000g325670_2.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ GX5-1               Start Time (d) ....  9269 03:46:17.609
 FITS Extension ....  1 - `RATE      `   Stop Time (d) .....  9269 16:01:13.609
 No. of Rows .......           60        Bin Time (s) ......    148.8
 Right Ascension ... 2.7020E+02          Internal time sys.. Converted to TJD
 Declination ....... -2.5160E+01         Experiment ........ ASCA     GIS3
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ...  9269.15714825428  (days)       3:46:17:609  (h:m:s:ms)
 Expected Stop ....  9269.66751862465  (days)      16: 1:13:609  (h:m:s:ms)
 
 Minimum Newbin Time    148.77331      (s)
 for Maximum Newbin No..              297
 
 Default Newbin Time is:   148.77331    (s) (to have 1 Intv. of     297 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     148.77331      (s)
 Maximum Newbin No.               297
 
 Default Newbins per Interval are:       297
 (giving       1 Interval of       297 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       297 Newbins of       148.773     (s)
 
     297 analysis results per interval
 
  1% completed
  3% completed
  5% completed
  6% completed
  8% completed
 10% completed
 11% completed
 13% completed
 15% completed
 16% completed
 18% completed
 20% completed
 21% completed
 23% completed
 25% completed
 26% completed
 28% completed
 30% completed
 31% completed
 33% completed
 35% completed
 36% completed
 38% completed
 40% completed
 41% completed
 43% completed
 45% completed
 46% completed
 48% completed
 50% completed
 51% completed
 53% completed
 55% completed
 56% completed
 58% completed
 60% completed
 61% completed
 63% completed
 65% completed
 66% completed
 68% completed
 70% completed
 71% completed
 73% completed
 75% completed
 76% completed
 78% completed
 80% completed
 81% completed
 83% completed
 85% completed
 86% completed
 88% completed
 90% completed
 91% completed
 93% completed
 95% completed
 96% completed
 98% completed
100% completed
 
 Intv    1   Start  9269  3:47:31
     Ser.1     Avg 0.3346        Chisq  189.2       Var 0.7726E-02 Newbs.     60
               Min 0.3361E-01      Max 0.4436    expVar 0.2402E-02  Bins     60
PLT> @lightcurve_plot_commands.tmp
!PLT> dev ad10001000g325670_2_lc.ps/ps
!PLT> LA File ad10001000g325670_2.lc
!PLT> plot
!PLT> quit

-> Plotting ad10001000s000003_0.lc in ad10001000s000003_0_lc.ps
-> stdout output from lcurve

 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad10001000s000003_0.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ GX5-1               Start Time (d) ....  9269 04:54:09.467
 FITS Extension ....  1 - `RATE      `   Stop Time (d) .....  9269 13:29:45.609
 No. of Rows .......         3644        Bin Time (s) ......    4.000
 Right Ascension ... 2.7020E+02          Internal time sys.. Converted to TJD
 Declination ....... -2.5160E+01         Experiment ........ ASCA     SIS0
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ...  9269.20427623537  (days)       4:54: 9:467  (h:m:s:ms)
 Expected Stop ....  9269.56233343946  (days)      13:29:45:609  (h:m:s:ms)
 
 Minimum Newbin Time    4.0000000      (s)
 for Maximum Newbin No..             7735
 
 Default Newbin Time is:   60.493043    (s) (to have 1 Intv. of     512 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     60.493043      (s)
 Maximum Newbin No.               512
 
 Default Newbins per Interval are:       512
 (giving       1 Interval of       512 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       512 Newbins of       60.4930     (s)
 
     512 analysis results per interval
 
  1% completed
  2% completed
  3% completed
  4% completed
  5% completed
  6% completed
  7% completed
  8% completed
  9% completed
 10% completed
 11% completed
 12% completed
 13% completed
 14% completed
 15% completed
 16% completed
 17% completed
 18% completed
 19% completed
 20% completed
 21% completed
 22% completed
 23% completed
 24% completed
 25% completed
 26% completed
 27% completed
 28% completed
 29% completed
 30% completed
 31% completed
 32% completed
 33% completed
 34% completed
 35% completed
 36% completed
 37% completed
 38% completed
 39% completed
 40% completed
 41% completed
 42% completed
 43% completed
 44% completed
 45% completed
 46% completed
 47% completed
 48% completed
 49% completed
 50% completed
 51% completed
 52% completed
 53% completed
 54% completed
 55% completed
 56% completed
 57% completed
 58% completed
 59% completed
 60% completed
 61% completed
 62% completed
 63% completed
 64% completed
 65% completed
 66% completed
 67% completed
 68% completed
 69% completed
 70% completed
 71% completed
 72% completed
 73% completed
 74% completed
 75% completed
 76% completed
 77% completed
 78% completed
 79% completed
 80% completed
 81% completed
 82% completed
 83% completed
 84% completed
 85% completed
 86% completed
 87% completed
 88% completed
 89% completed
 90% completed
 91% completed
 92% completed
 93% completed
 94% completed
 95% completed
 96% completed
 97% completed
 98% completed
 99% completed
100% completed
 
 Intv    1   Start  9269  4:54:39
     Ser.1     Avg  248.3        Chisq  9958.       Var  188.8     Newbs.    259
               Min  223.2          Max  278.7    expVar  5.106      Bins   3644
PLT> @lightcurve_plot_commands.tmp
!PLT> dev ad10001000s000003_0_lc.ps/ps
!PLT> LA File ad10001000s000003_0.lc
!PLT> plot
!PLT> quit

-> Plotting ad10001000s032002_1.lc in ad10001000s032002_1_lc.ps
-> stdout output from lcurve

 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad10001000s032002_1.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ GX5-1               Start Time (d) ....  9269 04:37:29.609
 FITS Extension ....  1 - `RATE      `   Stop Time (d) .....  9269 04:53:57.467
 No. of Rows .......          222        Bin Time (s) ......    4.000
 Right Ascension ... 2.7020E+02          Internal time sys.. Converted to TJD
 Declination ....... -2.5160E+01         Experiment ........ ASCA     SIS0
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ...  9269.19270380983  (days)       4:37:29:609  (h:m:s:ms)
 Expected Stop ....  9269.20413734717  (days)       4:53:57:467  (h:m:s:ms)
 
 Minimum Newbin Time    4.0000000      (s)
 for Maximum Newbin No..              247
 
 Default Newbin Time is:   4.0000000    (s) (to have 1 Intv. of     247 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     4.0000000      (s)
 Maximum Newbin No.               247
 
 Default Newbins per Interval are:       247
 (giving       1 Interval of       247 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       247 Newbins of       4.00000     (s)
 
     247 analysis results per interval
 
  1% completed
  2% completed
  3% completed
  4% completed
  5% completed
  6% completed
  7% completed
  8% completed
  9% completed
 10% completed
 11% completed
 12% completed
 13% completed
 14% completed
 15% completed
 16% completed
 17% completed
 18% completed
 19% completed
 20% completed
 21% completed
 22% completed
 23% completed
 24% completed
 25% completed
 26% completed
 27% completed
 28% completed
 29% completed
 30% completed
 31% completed
 32% completed
 33% completed
 34% completed
 35% completed
 36% completed
 37% completed
 38% completed
 39% completed
 40% completed
 41% completed
 42% completed
 43% completed
 44% completed
 45% completed
 46% completed
 47% completed
 48% completed
 49% completed
 50% completed
 51% completed
 52% completed
 53% completed
 54% completed
 55% completed
 56% completed
 57% completed
 58% completed
 59% completed
 60% completed
 61% completed
 62% completed
 63% completed
 64% completed
 65% completed
 66% completed
 67% completed
 68% completed
 69% completed
 70% completed
 71% completed
 72% completed
 73% completed
 74% completed
 75% completed
 76% completed
 77% completed
 78% completed
 79% completed
 80% completed
 81% completed
 82% completed
 83% completed
 84% completed
 85% completed
 86% completed
 87% completed
 88% completed
 89% completed
 90% completed
 91% completed
 92% completed
 93% completed
 94% completed
 95% completed
 96% completed
 97% completed
 98% completed
 99% completed
100% completed
 
 Intv    1   Start  9269  4:37:31
     Ser.1     Avg  174.2        Chisq  200.7       Var  39.38     Newbs.    222
               Min  158.0          Max  192.5    expVar  43.58      Bins    222
PLT> @lightcurve_plot_commands.tmp
!PLT> dev ad10001000s032002_1_lc.ps/ps
!PLT> LA File ad10001000s032002_1.lc
!PLT> plot
!PLT> quit

-> Plotting ad10001000s100003_0.lc in ad10001000s100003_0_lc.ps
-> stdout output from lcurve

 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad10001000s100003_0.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ GX5-1               Start Time (d) ....  9269 04:54:33.609
 FITS Extension ....  1 - `RATE      `   Stop Time (d) .....  9269 13:29:45.609
 No. of Rows .......         3588        Bin Time (s) ......    4.000
 Right Ascension ... 2.7020E+02          Internal time sys.. Converted to TJD
 Declination ....... -2.5160E+01         Experiment ........ ASCA     SIS1
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ...  9269.20455566169  (days)       4:54:33:609  (h:m:s:ms)
 Expected Stop ....  9269.56233343946  (days)      13:29:45:609  (h:m:s:ms)
 
 Minimum Newbin Time    4.0000000      (s)
 for Maximum Newbin No..             7728
 
 Default Newbin Time is:   60.445835    (s) (to have 1 Intv. of     512 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     60.445835      (s)
 Maximum Newbin No.               512
 
 Default Newbins per Interval are:       512
 (giving       1 Interval of       512 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       512 Newbins of       60.4458     (s)
 
     512 analysis results per interval
 
  1% completed
  2% completed
  3% completed
  4% completed
  5% completed
  6% completed
  7% completed
  8% completed
  9% completed
 10% completed
 11% completed
 12% completed
 13% completed
 14% completed
 15% completed
 16% completed
 17% completed
 18% completed
 19% completed
 20% completed
 21% completed
 22% completed
 23% completed
 24% completed
 25% completed
 26% completed
 27% completed
 28% completed
 29% completed
 30% completed
 31% completed
 32% completed
 33% completed
 34% completed
 35% completed
 36% completed
 37% completed
 38% completed
 39% completed
 40% completed
 41% completed
 42% completed
 43% completed
 44% completed
 45% completed
 46% completed
 47% completed
 48% completed
 49% completed
 50% completed
 51% completed
 52% completed
 53% completed
 54% completed
 55% completed
 56% completed
 57% completed
 58% completed
 59% completed
 60% completed
 61% completed
 62% completed
 63% completed
 64% completed
 65% completed
 66% completed
 67% completed
 68% completed
 69% completed
 70% completed
 71% completed
 72% completed
 73% completed
 74% completed
 75% completed
 76% completed
 77% completed
 78% completed
 79% completed
 80% completed
 81% completed
 82% completed
 83% completed
 84% completed
 85% completed
 86% completed
 87% completed
 88% completed
 89% completed
 90% completed
 91% completed
 92% completed
 93% completed
 94% completed
 95% completed
 96% completed
 97% completed
 98% completed
 99% completed
100% completed
 
 Intv    1   Start  9269  4:55: 3
     Ser.1     Avg  259.6        Chisq  5317.       Var  120.6     Newbs.    258
               Min  240.8          Max  292.3    expVar  6.002      Bins   3588
PLT> @lightcurve_plot_commands.tmp
!PLT> dev ad10001000s100003_0_lc.ps/ps
!PLT> LA File ad10001000s100003_0.lc
!PLT> plot
!PLT> quit

-> Plotting ad10001000s132002_1.lc in ad10001000s132002_1_lc.ps
-> stdout output from lcurve

 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad10001000s132002_1.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ GX5-1               Start Time (d) ....  9269 04:37:29.609
 FITS Extension ....  1 - `RATE      `   Stop Time (d) .....  9269 04:54:21.467
 No. of Rows .......          228        Bin Time (s) ......    4.000
 Right Ascension ... 2.7020E+02          Internal time sys.. Converted to TJD
 Declination ....... -2.5160E+01         Experiment ........ ASCA     SIS1
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ...  9269.19270380983  (days)       4:37:29:609  (h:m:s:ms)
 Expected Stop ....  9269.20441512383  (days)       4:54:21:467  (h:m:s:ms)
 
 Minimum Newbin Time    4.0000000      (s)
 for Maximum Newbin No..              253
 
 Default Newbin Time is:   4.0000000    (s) (to have 1 Intv. of     253 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     4.0000000      (s)
 Maximum Newbin No.               253
 
 Default Newbins per Interval are:       253
 (giving       1 Interval of       253 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       253 Newbins of       4.00000     (s)
 
     253 analysis results per interval
 
  1% completed
  2% completed
  3% completed
  4% completed
  5% completed
  6% completed
  7% completed
  8% completed
  9% completed
 10% completed
 11% completed
 12% completed
 13% completed
 14% completed
 15% completed
 16% completed
 17% completed
 18% completed
 19% completed
 20% completed
 21% completed
 22% completed
 23% completed
 24% completed
 25% completed
 26% completed
 27% completed
 28% completed
 29% completed
 30% completed
 31% completed
 32% completed
 33% completed
 34% completed
 35% completed
 36% completed
 37% completed
 38% completed
 39% completed
 40% completed
 41% completed
 42% completed
 43% completed
 44% completed
 45% completed
 46% completed
 47% completed
 48% completed
 49% completed
 50% completed
 51% completed
 52% completed
 53% completed
 54% completed
 55% completed
 56% completed
 57% completed
 58% completed
 59% completed
 60% completed
 61% completed
 62% completed
 63% completed
 64% completed
 65% completed
 66% completed
 67% completed
 68% completed
 69% completed
 70% completed
 71% completed
 72% completed
 73% completed
 74% completed
 75% completed
 76% completed
 77% completed
 78% completed
 79% completed
 80% completed
 81% completed
 82% completed
 83% completed
 84% completed
 85% completed
 86% completed
 87% completed
 88% completed
 89% completed
 90% completed
 91% completed
 92% completed
 93% completed
 94% completed
 95% completed
 96% completed
 97% completed
 98% completed
 99% completed
100% completed
 
 Intv    1   Start  9269  4:37:31
     Ser.1     Avg  147.8        Chisq  201.3       Var  32.67     Newbs.    228
               Min  131.8          Max  165.2    expVar  36.98      Bins    228
PLT> @lightcurve_plot_commands.tmp
!PLT> dev ad10001000s132002_1_lc.ps/ps
!PLT> LA File ad10001000s132002_1.lc
!PLT> plot
!PLT> quit

-> Creating GIS monitor count (HK) lightcurves
-> Creating a merged GTI file for g2
-> Making L1 light curve of ft931009_0333_1601G2HK.fits with irate=HIGH
-> stdout output from ghkcurve

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  64579 output records from   64591  good input G2_L1    records.

-> Making L1 light curve of ft931009_0333_1601G2HK.fits with irate=HI+MED
-> stdout output from ghkcurve

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:   8701 output records from   65231  good input G2_L1    records.

-> Creating a merged GTI file for g3
-> Making L1 light curve of ft931009_0333_1601G3HK.fits with irate=HIGH
-> stdout output from ghkcurve

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  64579 output records from   64591  good input G3_L1    records.

-> Making L1 light curve of ft931009_0333_1601G3HK.fits with irate=HI+MED
-> stdout output from ghkcurve

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:   8700 output records from   65231  good input G3_L1    records.

Extracting source event files (23:33:21)

-> Extracting unbinned light curve ad10001000g200170.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          HIGH        1993-10-09  04:33:45    0.81E+04   902385     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         902385    743592         158793         0         0         0
 Writing events file
 743592 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        902385    743592         158793         0         0         0
   in  8078.0     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA > read events ad10001000g200170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad10001000g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad10001000g200170.ulc use_events=yes
Wrote events list to file ad10001000g200170.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_10001000.009/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting unbinned light curve ad10001000g200170.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          HIGH        1993-10-09  04:33:45    0.81E+04   902385     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         902385      4367         898018         0         0         0
 Writing events file
   4367 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        902385      4367         898018         0         0         0
   in  8078.0     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA > read events ad10001000g200170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad10001000g225670_2.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad10001000g200170.ulc use_events=yes
Wrote events list to file ad10001000g200170.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_10001000.009/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting unbinned light curve ad10001000g200270.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          MEDIUM      1993-10-09  03:33:13    0.64E+03     9901     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           9901      8114           1787         0         0         0
 Writing events file
   8114 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          9901      8114           1787         0         0         0
   in  640.15     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA > read events ad10001000g200270m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad10001000g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad10001000g200270.ulc use_events=yes
Wrote events list to file ad10001000g200270.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_10001000.009/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting unbinned light curve ad10001000g200270.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          MEDIUM      1993-10-09  03:33:13    0.64E+03     9901     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           9901        55           9846         0         0         0
 Writing events file
     55 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          9901        55           9846         0         0         0
   in  640.15     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA > read events ad10001000g200270m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad10001000g225670_2.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad10001000g200270.ulc use_events=yes
Wrote events list to file ad10001000g200270.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_10001000.009/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting unbinned light curve ad10001000g300170.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          HIGH        1993-10-09  04:33:45    0.81E+04   932121     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         932121    783185         148936         0         0         0
 Writing events file
 783185 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        932121    783185         148936         0         0         0
   in  8078.0     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA > read events ad10001000g300170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad10001000g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad10001000g300170.ulc use_events=yes
Wrote events list to file ad10001000g300170.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_10001000.009/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting unbinned light curve ad10001000g300170.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          HIGH        1993-10-09  04:33:45    0.81E+04   932121     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         932121      2902         929219         0         0         0
 Writing events file
   2902 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        932121      2902         929219         0         0         0
   in  8078.0     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA > read events ad10001000g300170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad10001000g325670_2.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad10001000g300170.ulc use_events=yes
Wrote events list to file ad10001000g300170.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_10001000.009/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting unbinned light curve ad10001000g300270.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          MEDIUM      1993-10-09  03:33:13    0.64E+03     9921     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           9921      8317           1604         0         0         0
 Writing events file
   8317 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          9921      8317           1604         0         0         0
   in  640.15     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA > read events ad10001000g300270m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad10001000g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad10001000g300270.ulc use_events=yes
Wrote events list to file ad10001000g300270.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_10001000.009/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting unbinned light curve ad10001000g300270.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          MEDIUM      1993-10-09  03:33:13    0.64E+03     9921     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           9921        28           9893         0         0         0
 Writing events file
     28 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          9921        28           9893         0         0         0
   in  640.15     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA > read events ad10001000g300270m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad10001000g325670_2.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad10001000g300270.ulc use_events=yes
Wrote events list to file ad10001000g300270.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_10001000.009/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting unbinned light curve ad10001000s000103.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 GX5-1       FAST        HIGH        1993-10-09  04:54:09    0.15E+05  3619684 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s000103h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
        3619684   3619684              0         0         0         0
 Writing events file
3619684 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
       3619684   3619684              0         0         0         0
   in  14571.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA > read events ad10001000s000103h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
Setting X and Y to RAW
 
Getting Min and Max for Energy Column...
Got min and max for PHA:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
Area discrimination is disabled.
The mask is set from    6 to  425
Both the area inside and outside the mask in the telemetry.
Use SELECT FAST to select the region  inside or outside the mask.
!xsel:ASCA-SIS0-FAST > set image det
!xsel:ASCA-SIS0-FAST > filter region ad10001000s032002_0.reg
Region filters would not be valid for this data.
!xsel:ASCA-SIS0-FAST > extract events
!xsel:ASCA-SIS0-FAST > save events outfile=ad10001000s000103.ulc use_events=yes
Wrote events list to file ad10001000s000103.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_10001000.009/
to the current working directory.
!xsel:ASCA-SIS0-FAST > exit save_session=no

-> Extracting unbinned light curve ad10001000s000302.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 GX5-1       BRIGHT      HIGH        1993-10-09  04:33:33    0.89E+03   187723 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s000302h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         187723    154653          33070         0         0         0
 Writing events file
 154653 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        187723    154653          33070         0         0         0
   in  887.72     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA > read events ad10001000s000302h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad10001000s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=ad10001000s000302.ulc use_events=yes
Wrote events list to file ad10001000s000302.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_10001000.009/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Extracting unbinned light curve ad10001000s000803.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 GX5-1       FAST        HIGH        1993-10-09  13:10:01    0.40E+01     1002 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s000803h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1002      1002              0         0         0         0
 Writing events file
   1002 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1002      1002              0         0         0         0
   in  4.0000     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA > read events ad10001000s000803h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
Setting X and Y to RAW
 
Getting Min and Max for Energy Column...
Got min and max for PHA:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
Area discrimination is disabled.
The mask is set from  140 to  268
Both the area inside and outside the mask in the telemetry.
Use SELECT FAST to select the region  inside or outside the mask.
!xsel:ASCA-SIS0-FAST > set image det
!xsel:ASCA-SIS0-FAST > filter region ad10001000s032002_0.reg
Region filters would not be valid for this data.
!xsel:ASCA-SIS0-FAST > extract events
!xsel:ASCA-SIS0-FAST > save events outfile=ad10001000s000803.ulc use_events=yes
Wrote events list to file ad10001000s000803.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_10001000.009/
to the current working directory.
!xsel:ASCA-SIS0-FAST > exit save_session=no

-> Extracting unbinned light curve ad10001000s100103.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 GX5-1       FAST        HIGH        1993-10-09  04:54:33    0.14E+05  3725545 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s100103h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
        3725545   3725545              0         0         0         0
 Writing events file
3725545 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
       3725545   3725545              0         0         0         0
   in  14350.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA > read events ad10001000s100103h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
Setting X and Y to RAW
 
Getting Min and Max for Energy Column...
Got min and max for PHA:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
Area discrimination is disabled.
The mask is set from  183 to  259
Both the area inside and outside the mask in the telemetry.
Use SELECT FAST to select the region  inside or outside the mask.
!xsel:ASCA-SIS1-FAST > set image det
!xsel:ASCA-SIS1-FAST > filter region ad10001000s132002_0.reg
Region filters would not be valid for this data.
!xsel:ASCA-SIS1-FAST > extract events
!xsel:ASCA-SIS1-FAST > save events outfile=ad10001000s100103.ulc use_events=yes
Wrote events list to file ad10001000s100103.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_10001000.009/
to the current working directory.
!xsel:ASCA-SIS1-FAST > exit save_session=no

-> Extracting unbinned light curve ad10001000s100302.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 GX5-1       BRIGHT      HIGH        1993-10-09  04:33:33    0.91E+03   157819 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s100302h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         157819    134772          23047         0         0         0
 Writing events file
 134772 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        157819    134772          23047         0         0         0
   in  911.72     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA > read events ad10001000s100302h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad10001000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=ad10001000s100302.ulc use_events=yes
Wrote events list to file ad10001000s100302.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_10001000.009/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

Extracting FRAME mode data (0:1:1)

-> Extracting FRAME mode data from ft931009_0333.1601
-> stdout output from tlmFrm

 *** tlmFrm Version 1.1 (1997-08-25) *** 
total number of superframes: 10625

Total of 0 sets of frame data are extracted.

-> Extracting corner pixel histograms

Extracting GIS calibration source spectra (0:1:34)

-> Standard Output From STOOL group_event_files:

1 ad10001000g200170h.unf 967327
1 ad10001000g200270m.unf 967327

-> Fetching GIS2_CALSRC256.2
-> Extracting ad10001000g220170.cal from ad10001000g200170h.unf ad10001000g200270m.unf
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          HIGH        1993-10-09  04:33:45    0.84E+04   944031     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          MEDIUM      1993-10-09  03:33:13    0.15E+04    23296     1024
      2 GX5-1       PH          HIGH        1993-10-09  04:33:45    0.84E+04   944031     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         944031      2051         941980         0         0         0
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g200270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          23296        29          23267         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        967327      2080         965247         0         0         0
   in  9814.0     seconds
 Spectrum         has     2080 counts for 0.2119     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 9814.0          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 3.57970E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10001000g220170.cal
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA > read events ad10001000g200170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA-GIS2-PH > read events ad10001000g200270m.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region GIS2_CALSRC256.2
!xsel:ASCA-GIS2-PH > extract spectrum
!xsel:ASCA-GIS2-PH > save spectrum ad10001000g220170.cal group=yes
Wrote spectrum to ad10001000g220170.cal
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Deleting BLANK keyword from ad10001000g220170.cal
-> gis2v4_0.rmf already present in current directory
-> Plotting ad10001000g220170_cal.ps and finding peak
-> Standard Output From STOOL xspec:


               Xspec 11.00 00:04:43 15-Aug-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xco" ...


!XSPEC>   query yes;
Querying disabled - assuming answer is yes

!XSPEC>   data ad10001000g220170.cal;
 Net count rate (cts/s) for file   1  0.2119    +/-  4.7181E-03
   using response (RMF) file...       gis2v4_0.rmf
   1 data set is in use

!XSPEC>   ignore bad;

!XSPEC>   ignore **-4.0;

!XSPEC>   ignore 8.0-**;

!XSPEC>   model powerlaw/b + gauss/b + gauss/b ;0.0 ; ;5.9 ;0.0 ; ;6.5 ;0.0 ; ;
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
Param# 1  :!Param# 1  : 0.0 
Param# 2  :!Param# 2  : 
Param# 3  :!Param# 3  : 5.9 
Param# 4  :!Param# 4  : 0.0 
Param# 5  :!Param# 5  : 
Param# 6  :!Param# 6  : 6.5 
Param# 7  :!Param# 7  : 0.0 
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     +/-      0.
    2    2    1   powerlaw/b norm                1.000     +/-      0.
    3    3    2   gaussian/b LineE    keV        5.900     +/-      0.
    4    4    2   gaussian/b Sigma    keV           0.     +/-      0.
    5    5    2   gaussian/b norm                1.000     +/-      0.
    6    6    3   gaussian/b LineE    keV        6.500     +/-      0.
    7    7    3   gaussian/b Sigma    keV           0.     +/-      0.
    8    8    3   gaussian/b norm                1.000     +/-      0.
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =      5230054.     using    84 PHA bins.
 Reduced chi-squared =      68816.49     for     76 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 6 = 3 1.101005;
Equating parameter :LineE to parameter gaussian:LineE  * 1.10101
    7 variable fit parameters
 Chi-Squared =      5230054.     using    84 PHA bins.
 Reduced chi-squared =      67922.77     for     77 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 7 = 4 1.049288;
Equating parameter :Sigma to parameter :Sigma  * 1.04929
    6 variable fit parameters
 Chi-Squared =      5230054.     using    84 PHA bins.
 Reduced chi-squared =      67051.97     for     78 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   freeze 1;
 Number of variable fit parameters =    5

!XSPEC>   renorm;
 Chi-Squared =      988.0961     using    84 PHA bins.
 Reduced chi-squared =      12.50755     for     79 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   fit;
 Chi-Squared    Lvl  Fit param # 1     2           3           4
                 5           6
   187.338     -3         0.      5.1324E-03   5.898      0.1188
              9.5861E-02  2.3707E-02
   165.059     -4         0.      3.7923E-03   5.936      0.2143
              0.1131      1.8193E-02
   157.934     -5         0.      4.4416E-03   5.937      0.1907
              0.1152      1.5541E-02
   157.640     -6         0.      4.1716E-03   5.941      0.1916
              0.1159      1.4870E-02
   157.604     -7         0.      4.3006E-03   5.940      0.1902
              0.1158      1.4960E-02
   157.599     -8         0.      4.2459E-03   5.941      0.1904
              0.1158      1.4931E-02
 ---------------------------------------------------------------------------
 Variances and Principal axes :
               2     3     4     5     6
 4.49E-07 | -0.99  0.00 -0.02 -0.03 -0.11
 3.71E-06 |  0.12 -0.10 -0.04 -0.10 -0.98
 1.34E-05 | -0.02 -0.09 -0.12  0.98 -0.09
 1.09E-04 |  0.01  0.83 -0.56  0.00 -0.06
 4.15E-04 | -0.01  0.55  0.82  0.14 -0.10
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     frozen
    2    2    1   powerlaw/b norm               4.2459E-03 +/-  0.7340E-03
    3    3    2   gaussian/b LineE    keV        5.941     +/-  0.1410E-01
    4    4    2   gaussian/b Sigma    keV       0.1904     +/-  0.1769E-01
    5    5    2   gaussian/b norm               0.1158     +/-  0.4579E-02
    6    3    3   gaussian/b LineE    keV        6.541     = par   3 *   1.101
    7    4    3   gaussian/b Sigma    keV       0.1998     = par   4 *   1.049
    8    6    3   gaussian/b norm               1.4931E-02 +/-  0.2929E-02
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =      157.5992     using    84 PHA bins.
 Reduced chi-squared =      1.994926     for     79 degrees of freedom
 Null hypothesis probability = 3.657E-07

!XSPEC>   setplot energy;

!XSPEC>   setplot com label top GIS2 Calibration Source, should peak near 5.9 keV;

!XSPEC>   setplot com log x off;

!XSPEC>   setplot com rescale x 4 8;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Calibration source ad10001000g220170.cal peaks at 5.941 +/- 0.0141 keV
-> Standard Output From STOOL group_event_files:

1 ad10001000g300170h.unf 991061
1 ad10001000g300270m.unf 991061

-> Fetching GIS3_CALSRC256.2
-> Extracting ad10001000g320170.cal from ad10001000g300170h.unf ad10001000g300270m.unf
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          HIGH        1993-10-09  04:33:45    0.84E+04   967766     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          MEDIUM      1993-10-09  03:33:13    0.15E+04    23295     1024
      2 GX5-1       PH          HIGH        1993-10-09  04:33:45    0.84E+04   967766     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         967766      1757         966009         0         0         0
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g300270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          23295        41          23254         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        991061      1798         989263         0         0         0
   in  9814.0     seconds
 Spectrum         has     1798 counts for 0.1832     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 9814.0          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.83360E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10001000g320170.cal
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA > read events ad10001000g300170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA-GIS3-PH > read events ad10001000g300270m.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region GIS3_CALSRC256.2
!xsel:ASCA-GIS3-PH > extract spectrum
!xsel:ASCA-GIS3-PH > save spectrum ad10001000g320170.cal group=yes
Wrote spectrum to ad10001000g320170.cal
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Deleting BLANK keyword from ad10001000g320170.cal
-> gis3v4_0.rmf already present in current directory
-> Plotting ad10001000g320170_cal.ps and finding peak
-> Standard Output From STOOL xspec:


               Xspec 11.00 00:07:49 15-Aug-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xco" ...


!XSPEC>   query yes;
Querying disabled - assuming answer is yes

!XSPEC>   data ad10001000g320170.cal;
 Net count rate (cts/s) for file   1  0.1832    +/-  4.3969E-03
   using response (RMF) file...       gis3v4_0.rmf
   1 data set is in use

!XSPEC>   ignore bad;

!XSPEC>   ignore **-4.0;

!XSPEC>   ignore 8.0-**;

!XSPEC>   model powerlaw/b + gauss/b + gauss/b ;0.0 ; ;5.9 ;0.0 ; ;6.5 ;0.0 ; ;
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
Param# 1  :!Param# 1  : 0.0 
Param# 2  :!Param# 2  : 
Param# 3  :!Param# 3  : 5.9 
Param# 4  :!Param# 4  : 0.0 
Param# 5  :!Param# 5  : 
Param# 6  :!Param# 6  : 6.5 
Param# 7  :!Param# 7  : 0.0 
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     +/-      0.
    2    2    1   powerlaw/b norm                1.000     +/-      0.
    3    3    2   gaussian/b LineE    keV        5.900     +/-      0.
    4    4    2   gaussian/b Sigma    keV           0.     +/-      0.
    5    5    2   gaussian/b norm                1.000     +/-      0.
    6    6    3   gaussian/b LineE    keV        6.500     +/-      0.
    7    7    3   gaussian/b Sigma    keV           0.     +/-      0.
    8    8    3   gaussian/b norm                1.000     +/-      0.
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =      5282754.     using    84 PHA bins.
 Reduced chi-squared =      69509.92     for     76 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 6 = 3 1.101005;
Equating parameter :LineE to parameter gaussian:LineE  * 1.10101
    7 variable fit parameters
 Chi-Squared =      5282754.     using    84 PHA bins.
 Reduced chi-squared =      68607.20     for     77 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 7 = 4 1.049288;
Equating parameter :Sigma to parameter :Sigma  * 1.04929
    6 variable fit parameters
 Chi-Squared =      5282754.     using    84 PHA bins.
 Reduced chi-squared =      67727.62     for     78 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   freeze 1;
 Number of variable fit parameters =    5

!XSPEC>   renorm;
 Chi-Squared =      672.6845     using    84 PHA bins.
 Reduced chi-squared =      8.514994     for     79 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   fit;
 Chi-Squared    Lvl  Fit param # 1     2           3           4
                 5           6
   197.535     -4         0.      7.8259E-03   6.046          0.
              7.4857E-02  5.4888E-03
   175.965     -5         0.      5.9525E-03   6.032          0.
              8.1548E-02  1.0816E-02
   175.560     -6         0.      6.2789E-03   6.015          0.
              8.2012E-02  1.0492E-02
   164.903     -7         0.      6.2776E-03   5.952          0.
              8.0163E-02  1.2780E-02
   164.561     -8         0.      5.9227E-03   5.956          0.
              7.8469E-02  1.5938E-02
   164.039     -9         0.      6.1314E-03   5.968          0.
              7.9914E-02  1.3597E-02
 Maximum number of increasing lambda iterations exceeded
 without decreasing the fit statistic, probable minimum
 found to available numerical accuracy
   159.450     -1         0.      5.7530E-03   5.972      0.2170
              8.2499E-02  1.2152E-02
   126.173     -2         0.      5.2616E-03   6.028      0.2000
              9.4523E-02  4.8309E-03
 Number of trials exceeded - last iteration delta =    33.28
   124.178     -3         0.      5.6664E-03   6.015      0.1778
              9.2946E-02  6.6112E-03
   123.932     -4         0.      5.5282E-03   6.014      0.1735
              9.2576E-02  6.5616E-03
   123.932      0         0.      5.5319E-03   6.014      0.1735
              9.2578E-02  6.5680E-03
 ---------------------------------------------------------------------------
 Variances and Principal axes :
               2     3     4     5     6
 3.94E-07 | -0.99  0.00 -0.01 -0.04 -0.13
 3.58E-06 |  0.14 -0.09 -0.04 -0.08 -0.98
 1.08E-05 | -0.03 -0.04 -0.09  0.99 -0.08
 1.25E-04 |  0.01  0.89 -0.46 -0.01 -0.06
 4.01E-04 |  0.00  0.45  0.88  0.09 -0.08
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     frozen
    2    2    1   powerlaw/b norm               5.5319E-03 +/-  0.6934E-03
    3    3    2   gaussian/b LineE    keV        6.014     +/-  0.1341E-01
    4    4    2   gaussian/b Sigma    keV       0.1735     +/-  0.1842E-01
    5    5    2   gaussian/b norm               9.2578E-02 +/-  0.3772E-02
    6    3    3   gaussian/b LineE    keV        6.622     = par   3 *   1.101
    7    4    3   gaussian/b Sigma    keV       0.1820     = par   4 *   1.049
    8    6    3   gaussian/b norm               6.5680E-03 +/-  0.2589E-02
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =      123.9317     using    84 PHA bins.
 Reduced chi-squared =      1.568756     for     79 degrees of freedom
 Null hypothesis probability = 9.347E-04

!XSPEC>   setplot energy;

!XSPEC>   setplot com label top GIS3 Calibration Source, should peak near 5.9 keV;

!XSPEC>   setplot com log x off;

!XSPEC>   setplot com rescale x 4 8;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Calibration source ad10001000g320170.cal peaks at 6.014 +/- 0.01341 keV

Extracting bright and dark Earth event files. (0:8:4)

-> Extracting bright and dark Earth events from ad10001000s000302h.unf
-> Extracting ad10001000s000302h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 GX5-1       BRIGHT      HIGH        1993-10-09  04:33:33    0.11E+04   253986 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s000302h.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA > read events ad10001000s000302h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

-> Deleting ad10001000s000302h.drk since it contains 0 events
-> Extracting bright and dark Earth events from ad10001000s000402m.unf
-> Extracting ad10001000s000402m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 GX5-1       BRIGHT      MEDIUM      1993-10-09  03:33:01    0.14E+04    44544 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s000402m.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA > read events ad10001000s000402m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

-> Deleting ad10001000s000402m.drk since it contains 0 events
-> Extracting bright and dark Earth events from ad10001000s000502m.unf
-> Extracting ad10001000s000502m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 GX5-1       BRIGHT      MEDIUM      1993-10-09  15:57:27    0.24E+03     6147 1111
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s000502m.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA > read events ad10001000s000502m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

-> Deleting ad10001000s000502m.drk since it contains 0 events
-> Extracting bright and dark Earth events from ad10001000s000602l.unf
-> Extracting ad10001000s000602l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 GX5-1       BRIGHT      LOW         1993-10-09  03:55:09    0.90E+03     5337 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s000602l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           5337       116              0      5221         0         0
 Writing events file
    116 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          5337       116              0      5221         0         0
   in  83.869     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA > read events ad10001000s000602l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad10001000s000602l.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad10001000s000602l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :          116
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               3          34
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            3
 Number of (internal) image counts   :          116
 Number of image cts rejected (N, %) :           3429.31
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            3            0            0
 
 Image counts      :             0          116            0            0
 Image cts rejected:             0           34            0            0
 Image cts rej (%) :          0.00        29.31         0.00         0.00
 
    filtering data...
 
 Total counts      :             0          116            0            0
 Total cts rejected:             0           34            0            0
 Total cts rej (%) :          0.00        29.31         0.00         0.00
 
 Number of clean counts accepted  :           82
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            3
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad10001000s100302h.unf
-> Extracting ad10001000s100302h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 GX5-1       BRIGHT      HIGH        1993-10-09  04:33:33    0.12E+04   213863 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s100302h.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA > read events ad10001000s100302h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

-> Deleting ad10001000s100302h.drk since it contains 0 events
-> Extracting bright and dark Earth events from ad10001000s100402m.unf
-> Extracting ad10001000s100402m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 GX5-1       BRIGHT      MEDIUM      1993-10-09  03:33:01    0.14E+04    44672 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s100402m.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA > read events ad10001000s100402m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

-> Deleting ad10001000s100402m.drk since it contains 0 events
-> Extracting bright and dark Earth events from ad10001000s100502m.unf
-> Extracting ad10001000s100502m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 GX5-1       BRIGHT      MEDIUM      1993-10-09  15:57:31    0.24E+03     7168 1111
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s100502m.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA > read events ad10001000s100502m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

-> Deleting ad10001000s100502m.drk since it contains 0 events
-> Extracting bright and dark Earth events from ad10001000s100602l.unf
-> Extracting ad10001000s100602l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 GX5-1       BRIGHT      LOW         1993-10-09  03:55:09    0.90E+03     6002 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000s100602l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           6002       222              0      5780         0         0
 Writing events file
    222 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          6002       222              0      5780         0         0
   in  83.869     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA > read events ad10001000s100602l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad10001000s100602l.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad10001000s100602l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :          222
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               7         110
 
 Number of pixels rejected           :            7
 Number of (internal) image counts   :          222
 Number of image cts rejected (N, %) :          11049.55
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            7
 
 Image counts      :             0            0            0          222
 Image cts rejected:             0            0            0          110
 Image cts rej (%) :          0.00         0.00         0.00        49.55
 
    filtering data...
 
 Total counts      :             0            0            0          222
 Total cts rejected:             0            0            0          110
 Total cts rej (%) :          0.00         0.00         0.00        49.55
 
 Number of clean counts accepted  :          112
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            7
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad10001000g200170h.unf
-> Extracting ad10001000g200170h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          HIGH        1993-10-09  04:33:45    0.84E+04   944031     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         944031        56              0    943975         0         0
 Writing events file
     56 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        944031        56              0    943975         0         0
   in  81.956     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA > read events ad10001000g200170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting ad10001000g200170h.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          HIGH        1993-10-09  04:33:45    0.84E+04   944031     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g200170h.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA > read events ad10001000g200170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Deleting ad10001000g200170h.brt since it contains 0 events
-> Extracting bright and dark Earth events from ad10001000g200270m.unf
-> Extracting ad10001000g200270m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          MEDIUM      1993-10-09  03:33:13    0.15E+04    23296     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g200270m.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA > read events ad10001000g200270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Deleting ad10001000g200270m.drk since it contains 0 events
-> Extracting ad10001000g200270m.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          MEDIUM      1993-10-09  03:33:13    0.15E+04    23296     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g200270m.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA > read events ad10001000g200270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Deleting ad10001000g200270m.brt since it contains 0 events
-> Extracting bright and dark Earth events from ad10001000g300170h.unf
-> Extracting ad10001000g300170h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          HIGH        1993-10-09  04:33:45    0.84E+04   967766     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         967766        50              0    967716         0         0
 Writing events file
     50 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        967766        50              0    967716         0         0
   in  81.956     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA > read events ad10001000g300170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Extracting ad10001000g300170h.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          HIGH        1993-10-09  04:33:45    0.84E+04   967766     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g300170h.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA > read events ad10001000g300170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Deleting ad10001000g300170h.brt since it contains 0 events
-> Extracting bright and dark Earth events from ad10001000g300270m.unf
-> Extracting ad10001000g300270m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          MEDIUM      1993-10-09  03:33:13    0.15E+04    23295     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g300270m.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA > read events ad10001000g300270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Deleting ad10001000g300270m.drk since it contains 0 events
-> Extracting ad10001000g300270m.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 GX5-1       PH          MEDIUM      1993-10-09  03:33:13    0.15E+04    23295     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data19/seq_proc/ad0_10001000.009/ad10001000g300270m.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_10001000.009/
Setting mkf directory to /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA > read events ad10001000g300270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_10001000.009/
HK Directory is: /data/data19/seq_proc/ad0_10001000.009/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Deleting ad10001000g300270m.brt since it contains 0 events

Determining information about this observation (0:18:24)

-> Calculating ISAS time for sis
-> Calculating ISAS time for gis
-> Recording dates of PI calibration files
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory

Generating event file information page (0:20:48)

-> Summing time and events for s0 event files
-> listing ad10001000s000302h.unf
-> Standard Output From STOOL get_uniq_keys:

ad10001000s000402m.unf|S0_ENDH1|425|S0 area discrimination H end addr for ccd 1
ad10001000s000502m.unf|S0_ENDH1|268|S0 area discrimination H end addr for ccd 1
ad10001000s000402m.unf|S0CCDPOW|0100|Which S0 CCDs are in use(0123): 0=OFF 1=ON
ad10001000s000502m.unf|S0CCDPOW|1111|Which S0 CCDs are in use(0123): 0=OFF 1=ON
ad10001000s000402m.unf|S0CCDMOD|1|How many S0 CCDs are in use: 1, 2, or 4
ad10001000s000502m.unf|S0CCDMOD|4|How many S0 CCDs are in use: 1, 2, or 4
ad10001000s000402m.unf|S0CCDLST|1 1 1 1|S0 CCD readout order
ad10001000s000502m.unf|S0CCDLST|0 1 2 3|S0 CCD readout order

-> listing ad10001000s000402m.unf
-> listing ad10001000s000502m.unf
-> listing ad10001000s000602l.unf
-> Standard Output From STOOL get_uniq_keys:

ad10001000s000103h.unf|S0_AEPOW|1|S0 AE power status
ad10001000s000803h.unf|S0_AEPOW|0|S0 AE power status
ad10001000s000103h.unf|S0_ARIO1|0|S0 area discrimination IN/OUT for ccd 1
ad10001000s000803h.unf|S0_ARIO1|1|S0 area discrimination IN/OUT for ccd 1
ad10001000s000103h.unf|S0_STAH1|6|S0 area discrimination H start addr for ccd 1
ad10001000s000803h.unf|S0_STAH1|140|S0 area discrimination H start addr for ccd 1
ad10001000s000103h.unf|S0_ENDH1|425|S0 area discrimination H end addr for ccd 1
ad10001000s000803h.unf|S0_ENDH1|268|S0 area discrimination H end addr for ccd 1

-> listing ad10001000s000103h.unf
-> listing ad10001000s000803h.unf
-> Standard Output From STOOL get_uniq_keys:

ad10001000s000203m.unf|S0_AEANL|0|S0 AE analog status
ad10001000s000703m.unf|S0_AEANL|1|S0 AE analog status

-> listing ad10001000s000203m.unf
-> listing ad10001000s000703m.unf
-> Summing time and events for s1 event files
-> listing ad10001000s100302h.unf
-> Standard Output From STOOL get_uniq_keys:

ad10001000s100402m.unf|S1_STAH3|183|S1 area discrimination H start addr for ccd 3
ad10001000s100502m.unf|S1_STAH3|171|S1 area discrimination H start addr for ccd 3
ad10001000s100402m.unf|S1_ENDH3|259|S1 area discrimination H end addr for ccd 3
ad10001000s100502m.unf|S1_ENDH3|299|S1 area discrimination H end addr for ccd 3
ad10001000s100402m.unf|S1CCDPOW|0001|Which S1 CCDs are in use(0123): 0=OFF 1=ON
ad10001000s100502m.unf|S1CCDPOW|1111|Which S1 CCDs are in use(0123): 0=OFF 1=ON
ad10001000s100402m.unf|S1CCDMOD|1|How many S1 CCDs are in use: 1, 2, or 4
ad10001000s100502m.unf|S1CCDMOD|4|How many S1 CCDs are in use: 1, 2, or 4
ad10001000s100402m.unf|S1CCDLST|3 3 3 3|S1 CCD readout order
ad10001000s100502m.unf|S1CCDLST|0 1 2 3|S1 CCD readout order

-> listing ad10001000s100402m.unf
-> listing ad10001000s100502m.unf
-> listing ad10001000s100602l.unf
-> listing ad10001000s100103h.unf
-> Standard Output From STOOL get_uniq_keys:

ad10001000s100203m.unf|S1_AEANL|0|S1 AE analog status
ad10001000s100703m.unf|S1_AEANL|1|S1 AE analog status

-> listing ad10001000s100203m.unf
-> listing ad10001000s100703m.unf
-> Summing time and events for g2 event files
-> listing ad10001000g200170h.unf
-> listing ad10001000g200270m.unf
-> listing ad10001000g200371h.unf
-> Standard Output From STOOL get_uniq_keys:

ad10001000g200471m.unf|HV_RED|OFF|HV-reduction on/off
ad10001000g200571m.unf|HV_RED|ON|HV-reduction on/off
ad10001000g200471m.unf|HVH_LVL|3|HV-High level (0 - 7)
ad10001000g200571m.unf|HVH_LVL|0|HV-High level (0 - 7)
ad10001000g200471m.unf|HVL_LVL|4|HV-Low level (0 - 7)
ad10001000g200571m.unf|HVL_LVL|3|HV-Low level (0 - 7)

-> listing ad10001000g200471m.unf
-> listing ad10001000g200571m.unf

E2: in eventinfo: Filtered GIS2 exposure is 62% less than nominal

Stack Trace:

File: (eval 1050) Line: 1
File: Subs/ExternalScript.pm Line: 171
File: Subs/Sub.pm Line: 371
File: proc8.0.5/ad0 Line: 109

-> g2 ISAS exposure=23040
-> g2 screened exposure=8718
-> g2 ISAS exposure except ANG_DIST<0.01 = 22880
-> g2 ISAS exposure but with RBM_CONT<100 = 22944
-> g2 ISAS exposure but with H02 criteria = 22688
-> g2 total time screened like event files = 22720
-> g2 total PH time screened like event files = 9120
-> Summing time and events for g3 event files
-> listing ad10001000g300170h.unf
-> listing ad10001000g300270m.unf
-> listing ad10001000g300371h.unf
-> Standard Output From STOOL get_uniq_keys:

ad10001000g300471m.unf|HV_RED|OFF|HV-reduction on/off
ad10001000g300571m.unf|HV_RED|ON|HV-reduction on/off
ad10001000g300471m.unf|HVH_LVL|3|HV-High level (0 - 7)
ad10001000g300571m.unf|HVH_LVL|0|HV-High level (0 - 7)
ad10001000g300471m.unf|HVL_LVL|4|HV-Low level (0 - 7)
ad10001000g300571m.unf|HVL_LVL|3|HV-Low level (0 - 7)

-> listing ad10001000g300471m.unf
-> listing ad10001000g300571m.unf

E2: in eventinfo: Filtered GIS3 exposure is 62% less than nominal

Stack Trace:

File: (eval 1078) Line: 1
File: Subs/ExternalScript.pm Line: 171
File: Subs/Sub.pm Line: 371
File: proc8.0.5/ad0 Line: 109

-> g3 ISAS exposure=23040
-> g3 screened exposure=8718
-> g3 ISAS exposure except ANG_DIST<0.01 = 22880
-> g3 ISAS exposure but with RBM_CONT<100 = 22944
-> g3 ISAS exposure but with H02 criteria = 22688
-> g3 total time screened like event files = 22720
-> g3 total PH time screened like event files = 9120

Creating HTML header page (0:33:53)

Creating HTML source list (0:34:30)

Doing final wrapup of all files (0:37:19)

-> Copying job.par to ad10001000_009_job.par
-> Copying ad0.par to ad10001000_009_process.par
-> Creating ad10001000_tape.cat
-> Creating ad10001000_trend.cat
-> Creating ad10001000_009_file_info.html
-> Calculating site-independant checksums
-> Site independant checksum: 27681
-> Updating FITS checksum keywords
-> Running fverify on all FITS files