! Started logfile: J1725+7726_S_2006_02_16_yyk_uvs.log on Wed Jul 5 13:09:52 2006 obs J1725+7726_S_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J1725+7726_S_2006_02_16_yyk_uva.fits ! AN table 1: 873 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.688533 visibilities/baseline/integration-bin. ! Found source: J1725+7726 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2422 lines of history. ! ! Reading 108196 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1725+7726_S_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.17238 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.299 mas, bmaj=9.869 mas, bpa=0.5062 degrees ! Estimated noise=1.48613 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -0.5). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0816592 Jy ! Component: 100 - total flux cleaned = 0.116689 Jy ! Total flux subtracted in 100 components = 0.116689 Jy ! Clean residual min=-0.015275 max=0.017688 Jy/beam ! Clean residual mean=0.000348 rms=0.006192 Jy/beam ! Combined flux in latest and established models = 0.116689 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.116689 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.126015Jy sigma=2.317915 ! Fit after self-cal, rms=0.125478Jy sigma=2.303435 ! Inverting map and beam ! Estimated beam: bmin=2.299 mas, bmaj=9.869 mas, bpa=0.5062 degrees ! Estimated noise=1.48613 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.878 mas, bmaj=9.86 mas, bpa=0.9232 degrees ! Estimated noise=0.866601 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0566693 Jy ! Component: 100 - total flux cleaned = 0.0940559 Jy ! Component: 150 - total flux cleaned = 0.119765 Jy ! Component: 200 - total flux cleaned = 0.137515 Jy ! Total flux subtracted in 200 components = 0.137515 Jy ! Clean residual min=-0.021375 max=0.034295 Jy/beam ! Clean residual mean=0.001059 rms=0.011570 Jy/beam ! Combined flux in latest and established models = 0.254204 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 63 components and 0.254204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105186Jy sigma=1.870562 ! Fit after self-cal, rms=0.105044Jy sigma=1.864951 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.878 x 9.86 at 0.9232 degrees (North through East) ! Clean map min=-0.021073 max=0.118 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.105044Jy sigma=1.864951 ! Fit after self-cal, rms=0.105044Jy sigma=1.864951 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105044Jy sigma=1.864951 ! Fit after self-cal, rms=0.105022Jy sigma=1.864249 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.878 mas, bmaj=9.86 mas, bpa=0.9232 degrees ! Estimated noise=0.866601 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130482 Jy ! Component: 100 - total flux cleaned = 0.0218838 Jy ! Component: 150 - total flux cleaned = 0.0280003 Jy ! Component: 200 - total flux cleaned = 0.0316622 Jy ! Total flux subtracted in 200 components = 0.0316622 Jy ! Clean residual min=-0.022079 max=0.037116 Jy/beam ! Clean residual mean=0.000992 rms=0.010976 Jy/beam ! Combined flux in latest and established models = 0.285866 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 66 components and 0.285866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104015Jy sigma=1.837735 ! Fit after self-cal, rms=0.103947Jy sigma=1.836057 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103947Jy sigma=1.836057 ! Fit after self-cal, rms=0.100868Jy sigma=1.785363 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00389753 Jy ! Component: 100 - total flux cleaned = 0.00534096 Jy ! Component: 150 - total flux cleaned = 0.0065952 Jy ! Component: 200 - total flux cleaned = 0.00697858 Jy ! Total flux subtracted in 200 components = 0.00697858 Jy ! Clean residual min=-0.021587 max=0.036828 Jy/beam ! Clean residual mean=0.000969 rms=0.010706 Jy/beam ! Combined flux in latest and established models = 0.292844 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 71 components and 0.292844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100537Jy sigma=1.778923 ! Fit after self-cal, rms=0.100422Jy sigma=1.776251 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.878 x 9.86 at 0.9232 degrees (North through East) ! Clean map min=-0.020928 max=0.12172 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100422Jy sigma=1.776251 ! Fit after self-cal, rms=0.100422Jy sigma=1.776251 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100422Jy sigma=1.776251 ! Fit after self-cal, rms=0.100424Jy sigma=1.776092 ! Inverting map and beam ! Estimated beam: bmin=2.878 mas, bmaj=9.86 mas, bpa=0.9232 degrees ! Estimated noise=0.866601 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000429118 Jy ! Component: 100 - total flux cleaned = 0.00109273 Jy ! Component: 150 - total flux cleaned = 0.00145938 Jy ! Component: 200 - total flux cleaned = 0.00181849 Jy ! Total flux subtracted in 200 components = 0.00181849 Jy ! Clean residual min=-0.021463 max=0.036912 Jy/beam ! Clean residual mean=0.000964 rms=0.010635 Jy/beam ! Combined flux in latest and established models = 0.294663 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 72 components and 0.294663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100180Jy sigma=1.771616 ! Fit after self-cal, rms=0.100155Jy sigma=1.770927 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100155Jy sigma=1.770927 ! Fit after self-cal, rms=0.100155Jy sigma=1.770927 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100155Jy sigma=1.770927 ! Fit after self-cal, rms=0.100156Jy sigma=1.770924 ! Inverting map and beam ! Estimated beam: bmin=2.878 mas, bmaj=9.86 mas, bpa=0.9232 degrees ! Estimated noise=0.866601 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000245346 Jy ! Component: 100 - total flux cleaned = 0.000973752 Jy ! Component: 150 - total flux cleaned = 0.00119978 Jy ! Component: 200 - total flux cleaned = 0.00152949 Jy ! Total flux subtracted in 200 components = 0.00152949 Jy ! Clean residual min=-0.021428 max=0.037079 Jy/beam ! Clean residual mean=0.000959 rms=0.010592 Jy/beam ! Combined flux in latest and established models = 0.296192 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 72 components and 0.296192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099944Jy sigma=1.767084 ! Fit after self-cal, rms=0.099923Jy sigma=1.766484 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.179 mas, bmaj=10.39 mas, bpa=3.865 degrees ! Estimated noise=1.15233 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0173563 Jy ! Component: 100 - total flux cleaned = 0.0234972 Jy ! Component: 150 - total flux cleaned = 0.0242364 Jy ! Component: 200 - total flux cleaned = 0.0244948 Jy ! Total flux subtracted in 200 components = 0.0244948 Jy ! Clean residual min=-0.044238 max=0.074621 Jy/beam ! Clean residual mean=0.002151 rms=0.023721 Jy/beam ! Combined flux in latest and established models = 0.320687 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 81 components and 0.320687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100785Jy sigma=1.774192 ! Fit after self-cal, rms=0.100705Jy sigma=1.772785 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.299 mas, bmaj=9.869 mas, bpa=0.5062 degrees ! Estimated noise=1.48613 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0827468 Jy ! Component: 100 - total flux cleaned = 0.120693 Jy ! Component: 150 - total flux cleaned = 0.147 Jy ! Component: 200 - total flux cleaned = 0.1668 Jy ! Total flux subtracted in 200 components = 0.1668 Jy ! Clean residual min=-0.013655 max=0.019696 Jy/beam ! Clean residual mean=0.000395 rms=0.005488 Jy/beam ! Combined flux in latest and established models = 0.1668 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 60 model components to the UV plane model. ! The established model now contains 60 components and 0.1668 Jy ! Inverting map and beam ! Estimated beam: bmin=2.878 mas, bmaj=9.86 mas, bpa=0.9232 degrees ! Estimated noise=0.866601 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0416045 Jy ! Component: 100 - total flux cleaned = 0.0699478 Jy ! Component: 150 - total flux cleaned = 0.0895575 Jy ! Component: 200 - total flux cleaned = 0.103155 Jy ! Total flux subtracted in 200 components = 0.103155 Jy ! Clean residual min=-0.021692 max=0.035857 Jy/beam ! Clean residual mean=0.001033 rms=0.010997 Jy/beam ! Combined flux in latest and established models = 0.269956 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 73 components and 0.269956 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.179 mas, bmaj=10.39 mas, bpa=3.865 degrees ! Estimated noise=1.15233 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0299695 Jy ! Component: 100 - total flux cleaned = 0.043791 Jy ! Component: 150 - total flux cleaned = 0.0477581 Jy ! Component: 200 - total flux cleaned = 0.0482588 Jy ! Total flux subtracted in 200 components = 0.0482588 Jy ! Clean residual min=-0.045079 max=0.074426 Jy/beam ! Clean residual mean=0.002168 rms=0.023850 Jy/beam ! Combined flux in latest and established models = 0.318215 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 80 components and 0.318215 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.878 mas, bmaj=9.86 mas, bpa=0.9232 degrees ! Estimated noise=0.866601 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0101385 Jy ! Component: 100 - total flux cleaned = -0.0139171 Jy ! Component: 150 - total flux cleaned = -0.0165303 Jy ! Component: 200 - total flux cleaned = -0.0171179 Jy ! Total flux subtracted in 200 components = -0.0171179 Jy ! Clean residual min=-0.021675 max=0.037953 Jy/beam ! Clean residual mean=0.000947 rms=0.010534 Jy/beam ! Combined flux in latest and established models = 0.301097 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 97 components and 0.301097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100477Jy sigma=1.772853 ! Fit after self-cal, rms=0.100410Jy sigma=1.772183 wmodel J1725+7726_S_2006_02_16_yyk\_map.mod ! Writing 97 model components to file: J1725+7726_S_2006_02_16_yyk_map.mod wobs J1725+7726_S_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J1725+7726_S_2006_02_16_yyk_uvs.fits wwins J1725+7726_S_2006_02_16_yyk\_map.win ! wwins: Wrote 1 windows to J1725+7726_S_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.015648 Jy ! Component: 100 - total flux cleaned = 0.0281245 Jy ! Component: 150 - total flux cleaned = 0.0392047 Jy ! Component: 200 - total flux cleaned = 0.0492769 Jy ! Component: 250 - total flux cleaned = 0.058514 Jy ! Component: 300 - total flux cleaned = 0.0646645 Jy ! Component: 350 - total flux cleaned = 0.070095 Jy ! Component: 400 - total flux cleaned = 0.0734131 Jy ! Component: 450 - total flux cleaned = 0.0765479 Jy ! Component: 500 - total flux cleaned = 0.0792404 Jy ! Component: 550 - total flux cleaned = 0.0815392 Jy ! Component: 600 - total flux cleaned = 0.0830087 Jy ! Component: 650 - total flux cleaned = 0.0843998 Jy ! Component: 700 - total flux cleaned = 0.0852843 Jy ! Component: 750 - total flux cleaned = 0.0857151 Jy ! Component: 800 - total flux cleaned = 0.0855124 Jy ! Component: 850 - total flux cleaned = 0.0849297 Jy ! Component: 900 - total flux cleaned = 0.0838097 Jy ! Component: 950 - total flux cleaned = 0.0825505 Jy ! Component: 1000 - total flux cleaned = 0.0809842 Jy ! Component: 1050 - total flux cleaned = 0.0796402 Jy ! Component: 1100 - total flux cleaned = 0.0788303 Jy ! Component: 1150 - total flux cleaned = 0.0778832 Jy ! Component: 1200 - total flux cleaned = 0.0768117 Jy ! Component: 1250 - total flux cleaned = 0.0759275 Jy ! Component: 1300 - total flux cleaned = 0.0749237 Jy ! Component: 1350 - total flux cleaned = 0.0740863 Jy ! Component: 1400 - total flux cleaned = 0.0728669 Jy ! Component: 1450 - total flux cleaned = 0.0718212 Jy ! Component: 1500 - total flux cleaned = 0.0714381 Jy ! Component: 1550 - total flux cleaned = 0.0703168 Jy ! Component: 1600 - total flux cleaned = 0.0691077 Jy ! Component: 1650 - total flux cleaned = 0.0680474 Jy ! Component: 1700 - total flux cleaned = 0.0668978 Jy ! Component: 1750 - total flux cleaned = 0.0658908 Jy ! Component: 1800 - total flux cleaned = 0.0647983 Jy ! Component: 1850 - total flux cleaned = 0.0640493 Jy ! Component: 1900 - total flux cleaned = 0.0628994 Jy ! Component: 1950 - total flux cleaned = 0.0616794 Jy ! Component: 2000 - total flux cleaned = 0.0609855 Jy ! Total flux subtracted in 2048 components = 0.0601107 Jy ! Clean residual min=-0.004889 max=0.005103 Jy/beam ! Clean residual mean=0.000207 rms=0.002829 Jy/beam ! Combined flux in latest and established models = 0.361207 Jy keep ! Adding 352 model components to the UV plane model. ! The established model now contains 449 components and 0.361207 Jy ![Exited script file: muppet] wmap "J1725+7726_S_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.878 x 9.86 at 0.9232 degrees (North through East) ! Clean map min=-0.01284 max=0.12275 Jy/beam ! Writing clean map to FITS file: J1725+7726_S_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.122748 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00280797 device "J1725+7726_S_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J1725+7726_S_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -6.86278 6.86278 13.7256 27.4511 54.9023 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0084 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.122 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.878 x 9.86 at 0.9232 degrees (North through East) ! Clean map min=-0.01284 max=0.12275 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1725+7726_S_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J1725+7726_S_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1725+7726_S_2006_02_16_yyk_uvs.log closed on Wed Jul 5 13:10:23 2006