Fracture Analog Project Data Holdings
ER probes were placed both within the infiltration pond and at
vertical depths ranging 0.3 m (1 ft) to 12.7 m (48 ft) within five wells,
well II-5 and four of the slant wells (S-1 to S-4).
Electrical Resistivity (ER) Data from the 1997 Infiltration and Tracer Field Tests
File names
0813-0827.xls, 0827-0909.xls, 0909-0917.xls, 0917-0922.xls,
0922-0926.xls, 0926-1002.xls, 1002-1006.xls, 1006-1010.xls, 1010-1014.xls,
1014-1018.xls, 1018-1022.xls, 1022-1026.xls, 1026-1029.xls, 1029-1101.xls
File type/format
Excel file
Quantities measured (units)
current (amps) and voltage (volts)
Number of probes
80
Probe locations
Approximate probe locations are given in the file for probes located within
the pond. For probes installed within wells, the file gives the well id
and the distance down the borehole (ft).
Coordinates of each well are given in the file well_coords.xls.
(See the page on Site Characterization Data.)
Period of data collection
8/13/97 to 11/1/97
Frequency of data collection
one-hour intervals
Description
Each file name indicates the dates of data collections for data contained
in the file. Each file contains two worksheets, one for current and
one for voltage.
File names
II5 graphs.xls, S1 graphs.xls, S2 graphs.xls,
S3 graphs.xls, S4 graphs.xls
File type/format
Excel file
Quantities calculated (units)
resistance (ohms)
Number of probes
80
Period of data collection
9/9/97 to 11/1/97
Description
Each file contains four Excel charts of resistance vs. time for
the well indicated by the file name. Each chart shows data for one of the
pulses of the infiltration/tracer test.