The Occupational Safety and Health Act (OSH Act) requires employers to comply with hazard-specific safety and
health standards. In addition, pursuant to Section 5(a)(1) of the OSH Act, employers must provide their employees with a workplace
free from recognized hazards likely to cause death or serious physical harm. Emergency Preparedness Guides do not and cannot enlarge or
diminish an employer's obligations under the OSH Act.
Emergency Preparedness Guides are based on presently available information, as well as current occupational safety and health provisions
and standards. The procedures and practices discussed in Emergency Preparedness Guides may need to be modified when additional, relevant
information becomes available or when OSH Act standards are promulgated or modified. |
During emergency response activities or recovery operations, workers may be required to work
in cold environments, and sometimes for extended periods. Cold stress is a common problem encountered in these types
of situations. The following frequently asked questions will help workers understand what cold stress is, how it
may affect their health and safety, and how it can be prevented.
How cold is too cold?
When the body is unable to warm itself, cold related stress may result. This may include tissue damage and possibly death.
Four factors contribute to cold stress: cold air temperatures, high velocity air movement, dampness of the air, and
contact with cold water or surfaces. A cold environment forces the body to work harder to maintain its temperature. Cold air,
water, and snow all draw heat from the body. Wind chill is the combination of air temperature and wind speed. For example, when
the air temperature is 40°F, and the wind speed is 35 mph, your exposed skin receives conditions equivalent to the air
temperature being 11° F. While it is obvious that below freezing conditions combined with inadequate clothing could bring
about cold stress, it is also important to understand that it can also be brought about by temperatures in the 50's coupled
with some rain and wind.
How does the body react to cold conditions?
When in a cold environment, most of your body's energy is used to keep your internal temperature warm. Over time, your
body will begin to shift blood flow from your extremities (hands, feet, arms, and legs) and outer skin to the core
(chest and abdomen). This allows exposed skin and the extremities to cool rapidly and increases the risk of frostbite
and hypothermia. Combine this with cold water, and trench foot may also be a problem.
What are the most common cold induced problems?
Hypothermia, Frostbite, and Trench Foot.
What is Hypothermia?
Hypothermia which means "low heat", is a potentially
serious health condition. This occurs when body heat is lost faster than it can be replaced. When the core body temperature
drops below the normal 98.6° F to around 95° F, the onset of symptoms normally begins. The person may begin to shiver
and stomp their feet in order to generate heat. Workers may lose coordination, have slurred speech, and fumble with items in
the hand. The skin will likely be pale and cold. As the body temperature continues to fall these symptoms will worsen and
shivering will stop. Workers may be unable to walk or stand. Once the body temperature falls to around 85° F severe
hypothermia will develop and the person may become unconscious, and at 78°, the person could die.
Anyone working in a cold environment may be at risk for cold stress. However, older people may be at more risk than younger
adults, since older people are not able to generate heat as quickly. Certain medications may prevent the body from generating
heat normally. These include anti-depressants, sedatives, tranquilizers and
others.
Treatment depends on the severity of the hypothermia. For cases of mild hypothermia move to warm area
and stay active. Remove wet clothes and replace with dry clothes or blankets, cover the head. To promote metabolism and assist
in raising internal core temperature drink a warm (not hot) sugary drink. Avoid drinks with caffeine. For more
severe cases do all the above, plus contact emergency medical personnel (Call 911 for an ambulance), cover all extremities
completely, place very warm objects, such as hot packs or water bottles on the victim's head, neck, chest and groin. Arms and
legs should be warmed last. In cases of severe hypothermia treat the worker very gently and do not
apply external heat to re-warm. Hospital treatment is required.
If worker is in the water and unable to exit, secure collars, belts, hoods, etc. in an attempt to maintain warmer water against
the body. Move all extremities as close to the torso as possible to conserve body heat.
What is Frostbite?
Frostbite occurs when the skin actually freezes and loses water. In severe cases, amputation of the
frostbitten area may be required. While frostbite usually occurs when the temperatures are 30° F or lower, wind chill factors
can allow frostbite to occur in above freezing temperatures. Frostbite typically affects the extremities, particularly the feet
and hands. The affected body part will be cold, tingling, stinging or aching followed by numbness. Skin color turns red, then purple,
then white, and is cold to the touch. There may be blisters in severe cases.
Do not rub the area to warm it. Wrap the area in a soft cloth, move the worker to a warm area, and contact medical personnel. Do
not leave the worker alone. If help is delayed, immerse in warm (maximum 105 °F), not hot, water. Do not pour water on affected
part. If there is a chance that the affected part will get cold again do not warm. Warming and recooling will cause severe tissue
damage.
What is Trench Foot?
Trench Foot or immersion foot is caused by having feet immersed in cold water at temperatures
above freezing for long periods of time. It is similar to frostbite, but considered less severe. Symptoms usually consist
of tingling, itching or burning sensation. Blisters may be present.
Soak feet in warm water, then wrap with dry cloth bandages. Drink a warm, sugary drink.
What preventive measures should I take?
Plan for work in cold weather. Wearing appropriate clothing and being aware of how your body is reacting to the cold are
important to preventing cold stress. Avoiding alcohol, certain medications and smoking can also help to minimize the risk.
Protective Clothing is the most important way to avoid cold stress. The
type of fabric also makes a difference. Cotton loses its insulation value when it becomes wet. Wool, silk and most synthetics,
on the other hand, retain their insulation even when wet. The following are recommendations for working in cold environments:
- Wear at least three layers of clothing. An inner layer of wool, silk or synthetic to wick moisture away from the body. A middle layer of wool or synthetic to provide insulation even when wet. An outer wind and rain protection layer that allows some ventilation
to prevent overheating.
- Wear a hat or hood. Up to 40% of body heat can be lost when the head is left exposed.
- Wear insulated boots or other footwear.
- Keep a change of dry clothing available in case work clothes become wet.
- With the exception of the wicking layer do not wear tight clothing. Loose clothing allows better ventilation of heat away from
the body.
- Do not underestimate the wetting effects of perspiration. Oftentimes wicking and venting of the body’s sweat and heat are more
important than protecting from rain or snow.
Work Practices and planning are important preventative
measures. Drink plenty of liquids, avoiding caffeine and alcohol. It is easy to become dehydrated in cold
weather. If possible, heavy work should be scheduled during the warmer parts of the day. Take breaks out of the cold. Try
to work in pairs to keep an eye on each other and watch for signs of cold stress. Avoid fatigue since energy is needed to
keep muscles warm. Take frequent breaks and consume warm, high calorie food such as pasta to maintain energy reserves.
Engineering controls can be effective in reducing the risk of cold stress.
Radiant heaters may be used to warm workers. Shielding work areas from drafts or wind will reduce wind chill. Use insulating
material on equipment handles, especially metal handles, when temperatures drop below 30° F.
Training in recognition and treatment is important. Supervisors, workers and
coworkers should watch for signs of cold stress and allow workers to interrupt their work if they are extremely uncomfortable.
Supervisors should also ensure that work schedules allow appropriate rest periods and ensure liquids are available. They should
use appropriate engineering controls, personal protective equipment and work practices to reduce the risk of cold stress. All
of these measures should be incorporated into the relevant health and safety plans.
|