NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION
400 Seventh Street, SW
Washington, DC 20590
____________________________________
)
In Re: Tire Reserve Pressure )
)
____________________________________)
Information Requested from Tire Manufacturers to Address Questions on Tire Reserve Loading
To: Name
Title
Company Name and Address
Pursuant to 49 U.S.C. 30166(g) and 49 CFR Part 510, the National Highway Traffic Safety Administration (NHTSA) issues this Special Order to [COMPANY NAME] (Tire Manufacturer). This Special Order relates to NHTSA’s consideration of amendments to its Federal Motor Vehicle Safety Standards relating to tires. Under 49 U.S.C. 30166(g) and 49 CFR Part 510, Tire Manufacturer is required to provide complete and accurate information as specified below.
The Office of Management and Budget (OMB) Clearance Number for this collection of information is 2127-0623.
The Response of Tire Manufacturer to this Special Order must be accompanied by a notarized affidavit, signed by the responsible corporate official, stating that she has caused the records of Tire Manufacturer to be searched for information responsive to this Special Order, and that the answers furnished to the National Highway Traffic Safety Administration respond accurately and fully to this Special Order.
The information provided in response to this Special Order must be derived from any and all information known to, or in the possession of, Tire Manufacturer. Tire Manufacturer is not required to conduct any tests or physical measurements to respond to the specifications in this Special Order.
Each interrogatory in this Special Order must be answered separately and fully, in writing and under oath.
All data furnished in response to this order must be provided in electronic form and shall be submitted in the template (compatible with Microsoft Excel 2000), provided with this order. All fields of the template submitted to the agency shall be calculable.
If Tire Manufacturer, after exercising due diligence to secure the full information to do so, cannot respond to any interrogatory or portion thereof, please 1) answer to the extent possible and indicate your inability to answer the remainder, or 2) indicate that the information is "unavailable," or "not applicable (N/A)." When data would not, standing alone, be self-explanatory, the production of data shall be supplemented and accompanied by explanation.
All measurements furnished in response to the specifications in this Special Order shall be stated in metric and/or English/imperial units. The unit of measurement used shall be specified and used consistently within each response to each interrogatory.
Any tire pressure identified for LT tires shall be based on the "de-rated" value of the tire as per S5.1.2 of FMVSS No. 120.
Should you claim a privilege with respect to any information that is requested by any of the following Special Order, describe such items in sufficient detail to provide justification for the claim. Each claim of privilege must specify in detail all the grounds on which it rests. If Tire Manufacturer claims that any of the information submitted in response to this Special Order constitutes confidential commercial material within the meaning of 5 U.S.C. 552 (b) (4), or is protected from disclosure pursuant to 18 U.S.C. 1905, an affidavit must be provided in support of such claim, including a statement of the competitive harm that Tire Manufacturer believes would occur if the information were released to the public.
Unless otherwise indicated, the following Special Order shall refer to the period from vehicle model year 1996 to vehicle model year 2002.
Tire Manufacturer’s response must be submitted not later than March 24, 2003 to Ms. Nancy Bell (NCC-112), Room 5219, NHTSA, 400 Seventh Street, S.W., Washington, D.C. 20590.
Should you find that in order for Tire Manufacturer to respond fully and accurately to the information requests below your company requires information from another individual or company (e.g., supplier, manufacturer), Tire Manufacturer is required to request that information from that source. If, as a result, you require additional time to respond to a particular information request contained within the Special Order, you may request an extension of time to respond to that information request from Ms. Bell at the address above. Any such request must include an identification of the particular information request for which that extension is sought, together with information identifying the date Tire Manufacturer requested that additional information, and the date by which an answer is expected. Should you have any questions, Ms. Bell may be reached on (202) 366-2992.
Confidentiality requests must be submitted, in accordance with 49 CFR Part 512, to Ms. Heidi Coleman, Assistant Chief Counsel for Traffic Injury Control & General Law (NCC-113), Room 5219, NHTSA, 400 Seventh Street, S.W., Washington, D.C. 20590.
For the purpose of this special order, including the instructions thereto, the terms listed below are defined as follows:
"[COMPANY NAME]" ("Tire Manufacturer") means the named respondent/recipient to whom this special order is addressed, including all of its past or present divisions, headquarters, regional, zone and other offices, subsidiaries, affiliates, contractors, agents or attorneys thereof.
"And" as well as "or" shall be construed disjunctively or conjunctively as necessary to bring within this Special Order any information that may otherwise be construed to be out of their scope.
"Bead" means the part of the tire that is made of steel wires, wrapped or reinforced by ply cords and that is shaped to fit the rim.
"Bead separation" means a breakdown of the bond between components in the bead.
"Carcass" means the tire structure, except tread and sidewall rubber which, when inflated, bears the load.
"Chunking" means the breaking away of pieces of the tread or sidewall.
"Claim" means a written request or written demand for relief, including money or other compensation, assumption of expenditures, or equitable relief, related to a motor vehicle crash, accident, the failure of a component or system of a vehicle or an item of motor vehicle equipment, or a fire originating in or from a motor vehicle or a substance that leaked from a motor vehicle. Claim includes, but is not limited to, a demand in the absence of a lawsuit, a complaint initiating a lawsuit, an assertion or notice of litigation, a settlement, covenant not to sue or release of liability in the absence of a written demand, and a subrogation request. A claim exists regardless of any denial or refusal to pay it, and regardless of whether it has been settled or resolved in the manufacturer's favor. The existence of a claim may not be conditioned on the receipt of anything beyond the document(s) stating a claim. Claim does not include demands related to asbestos exposure, to emissions of volatile organic compounds from vehicle interiors, or to end-of-life disposal of vehicles, parts or components of vehicles, equipment, or parts or components of equipment.
"Cord" means the strands forming the plies in the tire.
"Cord separation" means the parting of cords from adjacent rubber compounds.
"Cracking" means any parting within the tread, sidewall, or inner liner of the tire extending to cord material.
"Innerliner" means the layer(s) forming the inside surface of a tubeless tire that contains the inflating medium within the tire.
"Innerliner separation" means the parting of the innerliner from cord material in the carcass.
"Light vehicle" means vehicles, except motorcycles, with a gross vehicle weight rating of (GVWR) or 10,000 pounds or less.
"Load rating" means the maximum load that a tire is rated to carry for a given inflation pressure.
"Maximum load rating" means the load rating for a tire at the maximum permissible inflation pressure for that tire.
"Maximum permissible inflation pressure" means the maximum cold inflation pressure to which a tire may be inflated.
"Open splice" means any parting at any junction of tread, sidewall, or innerliner that extends to cord material.
"Original Equipment" means the part and/or accessory, including full-size spare tires, installed by the vehicle manufacturer at the factory.
"Ply" means a layer of rubber-coated parallel cords.
"Ply separation" means a parting of rubber compound between adjacent plies.
"Pneumatic tire" means a mechanical device made of rubber, chemicals, fabric and steel or other materials that, when mounted on an automotive wheel, provides the traction and contains the gas or fluid that sustains the load.
"Radial ply tire" means a pneumatic tire in which the ply cords that extend to the beads are laid at substantially 90 degrees to the centerline of the tread.
"Sidewall" means that portion of a tire between the tread and bead.
"Sidewall separation" means the parting of the rubber compound from the cord material in the sidewall.
"TIN" means "tire identification number" as specified in 49 CFR § 574.5.
"Tire" means a pneumatic, radial ply tire.
"Tire Failure" means the following:
"Tire Size" means tire size designation, service description, and load identification as per the 2002 publications of one of the organizations listed in S4.4.1(b) of FMVSS No. 109 or S5.1(b) of FMVSS No. 119.
"Tread" means that portion of a tire that comes into contact with the road.
"Tread separation" means pulling away of the tread from the tire carcass.
"Vehicle" means "motor vehicle" as defined in 49 U.S.C. § 30102.
"VIN" means "vehicle identification number" as specified in 49 CFR § 565.6.
"You" or "your," means the named respondent to whom this Special Order is addressed.
Identify all claims related to "Tire Failure" of "Original Equipment" tires supplied/produced by you for light vehicles manufactured/produced/imported by vehicle manufacturers for sale in the United States for vehicle model years 1996 through 2002, by stating, for each claim, the following information:
Dated: January __, 2003
____________________________
Jacqueline Glassman
Chief Counsel
Office of the Chief Counsel (NCC-110)
National Highway Traffic Safety Administration
400 Seventh Street, SW
Room 5219
Washington, DC 20590