Here are the messages between 20070301 and 20070331. 1. BASINS 4 error message 2. Re: BASINS 4 error message 3. Missing hourly precipitation data 4. RE: Missing hourly precipitation data 5. Re: Error warning: 341 4 6. Question about WinHSPF 7. HSPF technique details and codes 8. Re: HSPF technique details and codes 9. Re: Question about WinHSPF 10. Re: Question about WinHSPF 11. Re: Question about WinHSPF 12. BMPRAC 13. Re: BMPRAC 14. Hi Ladies and Gentlemen: 15. Correspondence relationship of the soil classifications in STATSGO and SSURGO 16. Initial Met Station in WinHSPF 17. NAD83utm? 18. RE: NAD83utm? 19. HSPF error message. 20. Re: HSPF error message. 21. Re: HSPF error message. 22. Re: HSPF error message. 23. NYSKIP in BASINS SWAT2000 24. Re: Flow result 25. Re:Flow result 26. watershed delineation problems 27. re: watershed delineation problems 28. Re: watershed delineation problems 29. Read ArcGIS data in BASINS 30. Re: Read ArcGIS data in BASINS 31. Fwd: Read ArcGIS data in BASINS 32. Re: HYDR-PARM1 BLOCK 33. Re: HYDR-PARM1 BLOCK 34. modeling water diversions 35. Re:HYDR-PARM1 BLOCK 36. Re: Water balance Script 37. Land Use in Basins 38. Land use Land cover data set 39. RE: Read ArcGIS data in BASINS 40. Re: Read ArcGIS data in BASINS 41. Re: Land Use in Basins 42. Manual Delineation ----------------------------------------------------------- X-Message-Number: 1 X-lyris-Id: 152351 Date: Thu, 1 Mar 2007 10:58:24 -0600 (CST) From: Vladimir Alarcon Subject: BASINS 4 error message Please, has anyone in the list received the following error message when calling HSPF from BASINS 4? BASINS HSPF Error An error occurred: Conversion from string "" to type 'Double' is not valid. Any comments will be greatly appreciated. Thanks. Vladimir Alarcon GeoResources Institute MSU ----------------------------------------------------------- X-Message-Number: 2 X-lyris-Id: 152374 Date: Thu, 1 Mar 2007 11:34:29 -0600 (CST) From: Vladimir Alarcon Subject: Re: BASINS 4 error message Just giving more details on my problem. The error message detailed below is generated when the Status window reports: Writing WSD file. Thanks. On Thu, 1 Mar 2007, Vladimir Alarcon wrote: > Please, > has anyone in the list received the following error message when calling HSPF > from BASINS 4? > > BASINS HSPF Error > An error occurred: Conversion from string "" to type 'Double' is not valid. > > Any comments will be greatly appreciated. Thanks. > > Vladimir Alarcon > GeoResources Institute > MSU > ----------------------------------------------------------- X-Message-Number: 3 X-lyris-Id: 152504 Date: Mon, 5 Mar 2007 14:42:15 -0600 From: "Debabrata Sahoo" Subject: Missing hourly precipitation data Hello! Folks, I am trying to model a semi-arid coastal watershed using HSPF. It needs hourly precipitation data. At one station I have hourly precipitation data (for the period 1996-2006). However, some of the data points are missing at that station. I do not have any near by weather station. Can anyone through some light as to how to get hourly data sets for the station or fill in the Gaps. Can I use interpolation technique? I am using WDMUtil tool. Thanks, Deb ******************************************************************************** ***************** Debabrata Sahoo Research and Teaching Assistant Doctoral Candidate: Biological and Agricultural Engineering (Focus:Urban Hydrology/Water Resources/Aquatic Biogeochemistry/Ecological Engineering/Spatial Technologies) Texas A and M University, College Station, 77840 Phone: 979-845-4560 (O) 979-268-7890 (R) ******************************************************************************** ***************** ----- Original Message ----- From: To: "Private list for BASINS users" Sent: Thursday, February 15, 2007 3:33 PM Subject: [basinsinfo] Problem with WDM file corruption > > > Initially we had the WDM file created by BASINS only for FLOW > constituent. Externally, I updated the UCI file to model other > constituents. Using the WDMUtil I added new timeseries for each of the > modeled constituents. So far, I have modeled using this procedure for 8 > different watersheds. Of which, 6 watersheds run like a champ. When I > execute the other two UCI files using WinHSPF Lite the execution > progresses and shows 4% complete, at that time the execution stops with > the following message ???Click ???send??? to send a feedback message to > WinHSPFLt development team. No error is reported in the echo file. > > When the program execution is terminated, the WDM file is corrupted with > start dates, end dates, and julian dates going wrong. > > Steps taken: Only when the EXT TARGETS block is kept blank (in the UCI > file) the execution terminates after 4% and the WDM file is not > corrupted, since nothing is being written into WDM! > > Does anyone had a similar experience? If so, can you please let me know > where and what to look for in the UCI file. I appreciate your help. > Thank you. > > Seshadri S. Iyer, Ph.D., PE, CFM > Senior Water Resources Engineer > URS Corporation > 277 Bendix Road, Suite 500 > Virginia Beach, VA 23452 > Phone: (757) 499-4224 (office) > (757) 321-1273 (direct) > (757) 576-6684 (cell) > email: seshadri_iyer@urscorp.com > > > This e-mail and any attachments are confidential. If you receive this > message in error or are not the intended recipient, you should not retain, > distribute, disclose or use any of this information and you should destroy > the e-mail and any attachments or copies. > > > > > > ------------------------------------------ > You are currently subscribed to the basinsinfo listserver. > > To unsubscribe, send the words unsubscribe basinsinfo to > lyris@lists.epa.gov > OR: > Use the listserver's web interface at > https://lists.epa.gov/cgi-bin/lyris.pl to manage your > subscription. > OR > Contact the basinsinfo listserver owner at > basinsinfo-Owner@lists.epa.gov > ------------------------------------------ ----------------------------------------------------------- X-Message-Number: 4 X-lyris-Id: 152519 Date: Tue, 6 Mar 2007 10:38:26 -0500 From: "Paul Hummel" Subject: RE: Missing hourly precipitation data Hi Deb, We're working on an update to the met database for BASINS. Even though it's not complete, I may be able to help you out and send some data for nearby stations. Please contact me directly and let me know the station you are using and maybe its Lat/Lng coordinates and I'll see what I can find. Paul Hummel AQUA TERRA Consultants -----Original Message----- From: Debabrata Sahoo [mailto:dsahoo@tamu.edu] Sent: Monday, March 05, 2007 3:42 PM To: Private list for BASINS users Subject: [basinsinfo] Missing hourly precipitation data Hello! Folks, I am trying to model a semi-arid coastal watershed using HSPF. It needs hourly precipitation data. At one station I have hourly precipitation data (for the period 1996-2006). However, some of the data points are missing at that station. I do not have any near by weather station. Can anyone through some light as to how to get hourly data sets for the station or fill in the Gaps. Can I use interpolation technique? I am using WDMUtil tool. Thanks, Deb **************************************************************************** ********************* Debabrata Sahoo Research and Teaching Assistant Doctoral Candidate: Biological and Agricultural Engineering (Focus:Urban Hydrology/Water Resources/Aquatic Biogeochemistry/Ecological Engineering/Spatial Technologies) Texas A and M University, College Station, 77840 Phone: 979-845-4560 (O) 979-268-7890 (R) **************************************************************************** ********************* ----- Original Message ----- From: To: "Private list for BASINS users" Sent: Thursday, February 15, 2007 3:33 PM Subject: [basinsinfo] Problem with WDM file corruption > > > Initially we had the WDM file created by BASINS only for FLOW > constituent. Externally, I updated the UCI file to model other > constituents. Using the WDMUtil I added new timeseries for each of the > modeled constituents. So far, I have modeled using this procedure for 8 > different watersheds. Of which, 6 watersheds run like a champ. When I > execute the other two UCI files using WinHSPF Lite the execution > progresses and shows 4% complete, at that time the execution stops with > the following message ???Click ???send??? to send a feedback message to > WinHSPFLt development team. No error is reported in the echo file. > > When the program execution is terminated, the WDM file is corrupted with > start dates, end dates, and julian dates going wrong. > > Steps taken: Only when the EXT TARGETS block is kept blank (in the UCI > file) the execution terminates after 4% and the WDM file is not > corrupted, since nothing is being written into WDM! > > Does anyone had a similar experience? If so, can you please let me know > where and what to look for in the UCI file. I appreciate your help. > Thank you. > > Seshadri S. Iyer, Ph.D., PE, CFM > Senior Water Resources Engineer > URS Corporation > 277 Bendix Road, Suite 500 > Virginia Beach, VA 23452 > Phone: (757) 499-4224 (office) > (757) 321-1273 (direct) > (757) 576-6684 (cell) > email: seshadri_iyer@urscorp.com > > > This e-mail and any attachments are confidential. If you receive this > message in error or are not the intended recipient, you should not retain, > distribute, disclose or use any of this information and you should destroy > the e-mail and any attachments or copies. > > > > > > ------------------------------------------ > You are currently subscribed to the basinsinfo listserver. > > To unsubscribe, send the words unsubscribe basinsinfo to > lyris@lists.epa.gov > OR: > Use the listserver's web interface at > https://lists.epa.gov/cgi-bin/lyris.pl to manage your > subscription. > OR > Contact the basinsinfo listserver owner at > basinsinfo-Owner@lists.epa.gov > ------------------------------------------ ------------------------------------------ You are currently subscribed to the basinsinfo listserver. To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov OR: Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your subscription. OR Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov ------------------------------------------ ----------------------------------------------------------- X-Message-Number: 5 X-lyris-Id: 152571 Date: Tue, 06 Mar 2007 20:37:20 +0000 From: "harshad patel" Subject: Re: Error warning: 341 4

Hello Friends,

I am having trouble with below error. I try with adding two additional row to adjust high flow in ftable also.

----------------------------------------------------------------------------- ------------------------------------------------------
ERROR/WARNING ID:   341   4             & nbsp;            &nb sp;              ;             *
 *           &n bsp;            &nbs p;                           &n bsp;            &nbs p;                  *
 *  DATE/TIME: 1990/ 1/ 1  2: 0             & nbsp;            &nb sp;              ;             *
 *           &n bsp;            &nbs p;                           &n bsp;            &nbs p;                  *
 *  RCHRES:    11                           &n bsp;            &nbs p;                            *
 *           &n bsp;            &nbs p;                           &n bsp;            &nbs p;                  *
 *  The calculation of relative depth in subroutine AUXIL, using Newton's           *
 *  method of successive approximations, did not converge.  Probable reason --      *
 *  unusual or bad entries in RCHTAB.  Relevant data are:            &nbs p;              *
 *           &n bsp;            &nbs p;                           &n bsp;            &nbs p;                  *
 *           A          B          C      RDEP1      RDEP2  COUNT            &nb sp;      *
 *  0.0000E+00 1400.0     ********** ********** **********    112 

----------------------------------------------------------------------------- ---------------------------------------------------------

Anyone have idea how to fix this error?

Thanks .

-Harshad Patel


Windows Live Spaces: Share your your latest news with your friends now! ----------------------------------------------------------- X-Message-Number: 6 X-lyris-Id: 152778 Date: Fri, 9 Mar 2007 12:48:53 -0500 From: thidavisuth.chunkrua@duke.edu Subject: Question about WinHSPF Hello, I have questions regarding WinHSPF and hope someone can help me. 1. I had problem in running BASINS so I am manually creating watershed file (*.wsd), reach file (*.rch), channel geometry file (*.ptf), and point sources file (*.psr) by analyzing data in ArcMap. My questions are: - What is the unit of slope in the watershed file? - If I do not have any point sources in the watershed (it is a very small study area), is it still necessary to have *.ptf file in the wsd folder? If yes, how should I fill out fields. For example, "Facility Name" --> "" or "Npdes" --> 0? 2. When I create a new project in WinHSPF, I do not have the Project WDM file to download. The manual said that "If this file does not already exist, type the name in the file name box and it will be created." I did that but then I got an error: "Run-time error'53': File not found." Any recommendations on how I can create this file? Thank you very much in advance and have a good Friday! Whan ---------------------------------------------------- Thidavisuth (Whan) Chunkrua Master of Environmental Management'07 candidate Nicholas School of Environmental and Earth Sciences Duke University ----------------------------------------------------------- X-Message-Number: 7 X-lyris-Id: 152782 Date: Sun, 11 Mar 2007 16:51:06 +0000 From: Lei Wang Subject: HSPF technique details and codes --_36d5093e-7c90-4e1a-9003-28d6184cc5d1_ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Dear all, =20 I am using BASINs for my PhD study. Is anybody know where to get the docume= nt for HSPF technical details (such as algorithms, equations, etc.). As I k= now that HSPF code is open. Where can I get HSPF code? Thank you very much. =20 =20 With regards, =20 =20 Lei Wang =20 _________________________________________________________________ Explore the seven wonders of the world http://search.msn.com/results.aspx?q=3D7+wonders+world&mkt=3Den-US&form=3DQ= BRE= --_36d5093e-7c90-4e1a-9003-28d6184cc5d1_ Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Dear all,
 
I am using BASINs for my PhD study. Is anybody know where to get the docume= nt for HSPF technical details (such as algorithms, equations, etc.). As I k= now that HSPF code is open. Where can I get HSPF code? Thank you very much.=
 
 
With regards,
 
 
Lei Wang
 

Explore the seven wonders of the world Learn more! = --_36d5093e-7c90-4e1a-9003-28d6184cc5d1_-- ----------------------------------------------------------- X-Message-Number: 8 X-lyris-Id: 152785 Date: Sun, 11 Mar 2007 23:19:25 -0500 From: "Sillah Kargbo" Subject: Re: HSPF technique details and codes Hi Lei you can get all that you need from the BASINS home site. See the = following link www.epa.gov/waterscience/basins=20 Good luck. G.A. Sillah Kargbo, PhD, P.Eng. Water Resources Engineer, Source Protection Planning Lake Simcoe Region Conservation Authority 120 Bayview Parway Newmarket, Ontario L3Y 3W3 Tel: (905) 967-0112 ext 309 Fax: (905) 967-1265 E-mail: s.kargbo@lsrca.on.ca >>> wanglei21st@hotmail.com 11/03/2007 12:51 pm >>> Dear all, =20 I am using BASINs for my PhD study. Is anybody know where to get the = document for HSPF technical details (such as algorithms, equations, etc.). = As I know that HSPF code is open. Where can I get HSPF code? Thank you = very much. =20 =20 With regards, =20 =20 Lei Wang =20 _________________________________________________________________ Explore the seven wonders of the world http://search.msn.com/results.aspx?q=3D7+wonders+world&mkt=3Den-US&form=3DQ= BRE=20 ------------------------------------------ You are currently subscribed to the basinsinfo listserver.=20 To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.go= v=20 OR: Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.p= l to manage your=20 subscription. OR Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov= =20 ------------------------------------------ ----------------------------------------------------------- X-Message-Number: 9 X-lyris-Id: 152789 Date: Mon, 12 Mar 2007 06:37:53 -0700 (PDT) From: Mansoor Baloch Subject: Re: Question about WinHSPF --0-1396199385-1173706673=:52117 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Hello Everybody I am also creating the BASINS files manually and have the same questions as Mr. Chunkrua has plus i am also confused about the units of the quantities that we enter in the BASINS files. The manual says the units of the quantities like Area and Distance are to be in acres and ft respectively in the Watershed file(.wsd) and Segl and Delth are to be in miles and ft respectively in the Reach File(.rch). That is british units are to be used while i have my WDM file with metric units plus i will be creating the whole uci file in metric units. So what should i do? Thanks thidavisuth.chunkrua@duke.edu wrote: Hello, I have questions regarding WinHSPF and hope someone can help me. 1. I had problem in running BASINS so I am manually creating watershed file (*.wsd), reach file (*.rch), channel geometry file (*.ptf), and point sources file (*.psr) by analyzing data in ArcMap. My questions are: - What is the unit of slope in the watershed file? - If I do not have any point sources in the watershed (it is a very small study area), is it still necessary to have *.ptf file in the wsd folder? If yes, how should I fill out fields. For example, "Facility Name" --> "" or "Npdes" --> 0? 2. When I create a new project in WinHSPF, I do not have the Project WDM file to download. The manual said that "If this file does not already exist, type the name in the file name box and it will be created." I did that but then I got an error: "Run-time error'53': File not found." Any recommendations on how I can create this file? Thank you very much in advance and have a good Friday! Whan ---------------------------------------------------- Thidavisuth (Whan) Chunkrua Master of Environmental Management'07 candidate Nicholas School of Environmental and Earth Sciences Duke University ------------------------------------------ You are currently subscribed to the basinsinfo listserver. To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov OR: Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your subscription. OR Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov ------------------------------------------ With Regards -------------------------------------------------------------------------------- -------- Mansoor Ahmed Baloch PhD Candidate Department of Environmental Sciences & Engineering, Faculty of Civil Engineering, Istanbul Technical University 34469 Maslak, Istanbul, Turkey. -------------------------------------------------------------------------------- -------- Tel: +90 216 365 73 40 Cell:+90 (0)555 621 59 29 e-mail: baloch@itu.edu.tr -------------------------------------------------------------------------------- -------- --------------------------------- TV dinner still cooling? Check out "Tonight's Picks" on Yahoo! TV. --0-1396199385-1173706673=:52117 Content-Type: text/html; charset=iso-8859-1 Content-Transfer-Encoding: 8bit
Hello Everybody
 
I am also creating the BASINS files manually and have the same questions as Mr. Chunkrua has plus i am also confused about the units of the quantities that we enter in the BASINS files. The manual says the units of the quantities like  Area and Distance are to be in acres and ft respectively in the Watershed file(.wsd) and Segl and Delth are to be in miles and ft respectively in the Reach File(.rch). That is british units are to be used while i have my WDM file with metric units plus i will be creating the whole uci file in metric units. So what should i do?
Thanks
 


thidavisuth.chunkrua@duke.edu wrote:
Hello,

I have questions regarding WinHSPF and hope someone can help me.

1. I had problem in running BASINS so I am manually creating watershed file
(*.wsd), reach file (*.rch), channel geometry file (*.ptf), and point sources
file (*.psr) by analyzing data in ArcMap. My questions are:
- What is the unit of slope in the watershed file?
- If I do not have any point sources in the watershed (it is a very small study
area), is it still necessary to have *.ptf file in the wsd folder? If yes, how
should I fill out fields. For example, "Facility Name" --> "" or "Npdes" --> 0?

2. When I create a new project in WinHSPF, I do not have the Project WDM file to
download. The manual said that "If this file does not already exist, type the
name in the file name box and it will be created." I did that but then I got an
error: "Run-time error'53': File not found." Any recommendations on how I can
create this file?

Thank you very much in advance and have a good Friday!
Whan

----------------------------------------------------
T hidavisuth (Whan) Chunkrua
Master of Environmental Management'07 candidate
Nicholas School of Environmental and Earth Sciences
Duke University


------------------------------------------
You are currently subscribed to the basinsinfo listserver.

To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov
OR:
Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your
subscription.
OR
Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov
------------------------------------------



 
With Regards
------------------------------------------------------------------------- ---------------
Mansoor Ahmed Baloch
PhD Candidate
Department of Environmental Sciences & Engineering,
Faculty of Civil Engineering, 
Istanbul Technical University 34469 Maslak, Istanbul, Turkey.
--------------------------------------------------------------------------- -------------
Tel: +90 216 365 73 40
Cell:+90 (0)555 621 59 29
--------------------------------------------------------------------------- -------------

TV dinner still cooling?
Check out "Tonight's Picks" on Yahoo! TV. --0-1396199385-1173706673=:52117-- ----------------------------------------------------------- X-Message-Number: 10 X-lyris-Id: 152791 Date: Mon, 12 Mar 2007 10:14:01 -0500 From: "Sillah Kargbo" Subject: Re: Question about WinHSPF I am working in Canada where we use metric units. When initializing your = BASINS model have the option of changing your units to metric in the = projection window and during HSPF set up you also have the options in the = PERLND and IMPLND modules to choose the input and out units (English or = Metric) you want to work with.=20 Good luck. G.A. Sillah Kargbo, PhD, P.Eng. Water Resources Engineer, Source Protection Planning Lake Simcoe Region Conservation Authority 120 Bayview Parway Newmarket, Ontario L3Y 3W3 Tel: (905) 967-0112 ext 309 Fax: (905) 967-1265 E-mail: s.kargbo@lsrca.on.ca >>> maahbaloch@yahoo.com 12/03/2007 9:37 am >>> Hello Everybody =20 I am also creating the BASINS files manually and have the same questions = as Mr. Chunkrua has plus i am also confused about the units of the = quantities that we enter in the BASINS files. The manual says the units of = the quantities like Area and Distance are to be in acres and ft respective= ly in the Watershed file(.wsd) and Segl and Delth are to be in miles and = ft respectively in the Reach File(.rch). That is british units are to be = used while i have my WDM file with metric units plus i will be creating = the whole uci file in metric units. So what should i do? Thanks =20 =20 thidavisuth.chunkrua@duke.edu wrote: Hello, I have questions regarding WinHSPF and hope someone can help me. 1. I had problem in running BASINS so I am manually creating watershed = file (*.wsd), reach file (*.rch), channel geometry file (*.ptf), and point = sources file (*.psr) by analyzing data in ArcMap. My questions are: - What is the unit of slope in the watershed file? - If I do not have any point sources in the watershed (it is a very small = study area), is it still necessary to have *.ptf file in the wsd folder? If yes, = how should I fill out fields. For example, "Facility Name" --> "" or "Npdes" = --> 0? 2. When I create a new project in WinHSPF, I do not have the Project WDM = file to download. The manual said that "If this file does not already exist, type = the name in the file name box and it will be created." I did that but then I = got an error: "Run-time error'53': File not found." Any recommendations on how I = can create this file? Thank you very much in advance and have a good Friday! Whan ---------------------------------------------------- Thidavisuth (Whan) Chunkrua Master of Environmental Management'07 candidate Nicholas School of Environmental and Earth Sciences Duke University ------------------------------------------ You are currently subscribed to the basinsinfo listserver.=20 To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.go= v=20 OR: Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.p= l to manage your=20 subscription. OR Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov= =20 ------------------------------------------ =20 With Regards -------------------------------------------------------------------------= --------------- Mansoor Ahmed Baloch PhD Candidate Department of Environmental Sciences & Engineering, Faculty of Civil Engineering,=20 Istanbul Technical University 34469 Maslak, Istanbul, Turkey. -------------------------------------------------------------------------= --------------- Tel: +90 216 365 73 40 Cell:+90 (0)555 621 59 29 e-mail: baloch@itu.edu.tr=20 -------------------------------------------------------------------------= --------------- =20 --------------------------------- TV dinner still cooling? Check out "Tonight's Picks" on Yahoo! TV. ------------------------------------------ You are currently subscribed to the basinsinfo listserver.=20 To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.go= v=20 OR: Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.p= l to manage your=20 subscription. OR Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov= =20 ------------------------------------------ ----------------------------------------------------------- X-Message-Number: 11 X-lyris-Id: 152895 Date: Tue, 13 Mar 2007 15:18:43 -0500 From: Partington.Ed@epamail.epa.gov Subject: Re: Question about WinHSPF Whan wrote: Hello, I have questions regarding WinHSPF and hope someone can help me. >>>>My Answers 1. I had problem in running BASINS so I am manually creating watershed file (*.wsd), reach file (*.rch), channel geometry file (*.ptf), and point sources file (*.psr) by analyzing data in ArcMap. My questions are: - What is the unit of slope in the watershed file? >>>>> slope has no units. - If I do not have any point sources in the watershed (it is a very small study area), is it still necessary to have *.ptf file in the wsd folder? If yes, how should I fill out fields. For example, "Facility Name" --> "" or "Npdes" --> 0? >>>>>No you do NOT need a point source. You can put point sources in later. 2. When I create a new project in WinHSPF, I do not have the Project WDM file to download. The manual said that "If this file does not already exist, type the name in the file name box and it will be created." I did that but then I got an error: "Run-time error'53': File not found." Any recommendations on how I can create this file? >>>>>When you first create a project and wish to save the project WDM file a window >>>>>opens and asks you where you want to put your project WDM file. The file name >>>>>starts with a *.wdm . You need to remove the "*" and put in a 8 or less character >>>>>file name. Thank you very much in advance and have a good Friday! Whan ---------------------------------------------------- Thidavisuth (Whan) Chunkrua Master of Environmental Management'07 candidate Nicholas School of Environmental and Earth Sciences Duke University ------------------------------------------ EPA/OW/OST/SHPD/RSTSSB/BASINS ----------------------------------------------------------- X-Message-Number: 12 X-lyris-Id: 152944 Date: Wed, 14 Mar 2007 14:06:07 -0500 From: "Fang, Andrew F." Subject: BMPRAC I used WinHSPF to add a BMP to one of the subbasins in my model, which simulates three generalized water quality constitutes. During WinHSPF BMPRAC setup, I did not enter any removal efficiency values for any available pollutant species (e.g., PO4, NO3) because my model does not actually simulate them. The strange thing is that after I run the model with all these zero removal efficency valules, the results still show load reductions to all of my three generalized quality constitutes! Does anyone know what the BMPRAC module did that caused the load reductions?=20 Also, later I edited the BMPRAC block in a text editor to enter removal efficiency values for the three general quality constitutes that my model acutally simulates. It worked to reduce loadings from the subbasin. However, the reductions were smaller than those when all removal rates were set at zero (as I explained in the above paragraph). Any explanations? Thanks! Andrew =20 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Andrew Fang, Ph.D. Watershed Planning & Stormwater Permitting Water Quality Division Oklahoma Department of Environmental Quality 707 N. Robinson P.O. Box 1677 Oklahoma City, OK 73101-1677 ----------------------------------------------------------- X-Message-Number: 13 X-lyris-Id: 152946 Date: Wed, 14 Mar 2007 15:28:05 -0400 From: Troy_Naperala@URSCorp.com Subject: Re: BMPRAC --0__=0ABBF80DDFF9AD068f9e8a93df938690918c0ABBF80DDFF9AD06 Content-type: multipart/alternative; Boundary="1__=0ABBF80DDFF9AD068f9e8a93df938690918c0ABBF80DDFF9AD06" --1__=0ABBF80DDFF9AD068f9e8a93df938690918c0ABBF80DDFF9AD06 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: quoted-printable Andrew: I recently developed an HSPF file that used BMPRAC. Initially, I had similar problems. I eventually traced the non-intuitive results to prob= lems in the schematic and MASS-LINK blocks and BMPRAC inputs. There was not = a single item I can point to that was causing my problems...there were several. I just carefully edited my UCI file using a text editor until = the results were what I expected (I didn't try WinHSPF). If you send me your uci file directly I'll take a look at it. Best regards, Troy *************************************************************** Troy R. Naperala, P.E. Senior Project Engineer URS Corporation Architects, Engineers, Planners, Scientists 10850 Traverse Highway, Suite 2205 Traverse City, Michigan 49686 E-mail: Troy_Naperala@urscorp.com (Direct) (231) 932-7592 ext. 223 (Mobile) (231) 620-7083 (Fax) (231) 932-7594 Traverse City, Farmington Hills, Detroit, Grand Rapids = This e-mail and any attachments are confidential. If you receive this = message in error or are not the intended recipient, you should not ret= ain, distribute, disclose or use any of this information and you should des= troy the e-mail and any attachments or copies. = = = "Fang, Andrew F." = = To "Private list for BASINS users" = 03/14/2007 03:06 = PM = cc = Subj= ect Please respond to [basinsinfo] BMPRAC = "Private list for = BASINS users" = = = = I used WinHSPF to add a BMP to one of the subbasins in my model, which simulates three generalized water quality constitutes. During WinHSPF BMPRAC setup, I did not enter any removal efficiency values for any available pollutant species (e.g., PO4, NO3) because my model does not actually simulate them. The strange thing is that after I run the model= with all these zero removal efficency valules, the results still show load reductions to all of my three generalized quality constitutes! Doe= s anyone know what the BMPRAC module did that caused the load reductions?= Also, later I edited the BMPRAC block in a text editor to enter removal= efficiency values for the three general quality constitutes that my model acutally simulates. It worked to reduce loadings from the subbasin. However, the reductions were smaller than those when all removal rates were set at zero (as I explained in the above paragraph).= Any explanations? Thanks! Andrew =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Andrew Fang, Ph.D. Watershed Planning & Stormwater Permitting Water Quality Division Oklahoma Department of Environmental Quality 707 N. Robinson P.O. Box 1677 Oklahoma City, OK 73101-1677 ------------------------------------------ You are currently subscribed to the basinsinfo listserver. To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov OR: Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your subscription. OR Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.g= ov ------------------------------------------ = --1__=0ABBF80DDFF9AD068f9e8a93df938690918c0ABBF80DDFF9AD06 Content-type: text/html; charset=US-ASCII Content-Disposition: inline Content-transfer-encoding: quoted-printable

Andrew:

I recently developed an HSPF file that used BMPRAC. Initially, I had s= imilar problems. I eventually traced the non-intuitive results to probl= ems in the schematic and MASS-LINK blocks and BMPRAC inputs. There was = not a single item I can point to that was causing my problems...there w= ere several. I just carefully edited my UCI file using a text editor un= til the results were what I expected (I didn't try WinHSPF).

If you send me your uci file directly I'll take a look at it.

Best regards,
Troy
***************************************************************
Troy R. Naperala, P.E.
Senior Project Engineer
URS Corporation
Architects, Engineers, Planners, Scientists
10850 Traverse Highway, Suite 2205
Traverse City, Michigan 49686

E-mail: Troy_Naperala@urscorp.com
(Direct) (231) 932-7592 ext. 223
(Mobile) (231) 620-7083
(Fax) (231) 932-7594

Traverse City, Farmington Hills, Detroit, Grand Rapids


This e-mail and any attachments are confidential. If= you receive this message in error or are not the intended recipient, y= ou should not retain, distribute, disclose or use any of this informati= on and you should destroy the e-mail and any attachments or copies.



3D"Inactive"Fang, Andrew F.&quo= t; <Andrew.Fang@deq.state.ok.us>


=
          "Fang, Andrew F." <Andrew.Fang@deq= .state.ok.us>

          03/14/2007 03:06 PM
          Please respond to
          "Private list for BASINS users" <basinsinfo@lists.epa.gov&= gt;

 =

To
3D""
"Private list for BASINS users" <basinsin= fo@lists.epa.gov>

cc
3D""

Subject
3D""
[basinsinfo] BMPRAC
=3D""3D""<= /td>

I used WinHSPF to add a BMP to one of the subbasins in my model, wh= ich
simulates three generalized water quality constitutes. During WinHSPF BMPRAC setup, I did not enter any removal efficiency values for any
= available pollutant species (e.g., PO4, NO3) because my model does not<= br> actually simulate them. The strange thing is that after I run the model=
with all these zero removal efficency valules, the results still show load reductions to all of my three generalized quality constitutes! Doe= s
anyone know what the BMPRAC module did that caused the load reductions?=

Also, later I edited the BMPRAC block in a text editor to enter removal=
efficiency values for the three general quality constitutes that my
= model acutally simulates. It worked to reduce loadings from the
subbasin. However, the reductions were smaller than those when all
removal rates were set at zero (as I explained in the above paragraph).=
Any explanations?

Thanks!

Andrew  

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
Andrew Fang, Ph.D.
Watershed Planning & Stormwater Permitting
Water Quality Division
Oklahoma Department of Environmental Quality
707 N. Robinson
P.O. Box 1677
Oklahoma City, OK 73101-1677

------------------------------------------
You are currently subscribed to the basinsinfo listserver.

To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.ep= a.gov
OR:
Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your
subscription.
OR
Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.g= ov
------------------------------------------

= --1__=0ABBF80DDFF9AD068f9e8a93df938690918c0ABBF80DDFF9AD06-- --0__=0ABBF80DDFF9AD068f9e8a93df938690918c0ABBF80DDFF9AD06 Content-type: image/gif; name="graycol.gif" Content-Disposition: inline; filename="graycol.gif" Content-ID: <10__=0ABBF80DDFF9AD068f9e8a93df93@urscorp.com> Content-transfer-encoding: base64 R0lGODlhEAAQAKECAMzMzAAAAP///wAAACH5BAEAAAIALAAAAAAQABAAAAIXlI+py+0PopwxUbpu ZRfKZ2zgSJbmSRYAIf4fT3B0aW1pemVkIGJ5IFVsZWFkIFNtYXJ0U2F2ZXIhAAA7 --0__=0ABBF80DDFF9AD068f9e8a93df938690918c0ABBF80DDFF9AD06 Content-type: image/gif; name="pic04287.gif" Content-Disposition: inline; filename="pic04287.gif" Content-ID: <20__=0ABBF80DDFF9AD068f9e8a93df93@urscorp.com> Content-transfer-encoding: base64 R0lGODlhWABDALP/AAAAAK04Qf79/o+Gm7WuwlNObwoJFCsoSMDAwGFsmIuezf///wAAAAAAAAAA AAAAACH5BAEAAAgALAAAAABYAEMAQAT/EMlJq704682770RiFMRinqggEUNSHIchG0BCfHhOjAuh EDeUqTASLCbBhQrhG7xis2j0lssNDopE4jfIJhDaggI8YB1sZeZgLVA9YVCpnGagVjV171aRVrYR RghXcAGFhoUETwYxcXNyADJ3GlcSKGAwLwllVC1vjIUHBWsFilKQdI8GA5IcpApeJQt8L09lmgkH LZikoU5wjqcyAMMFrJIDPAKvCFletKSev1HBw8KrxtjZ2tvc3d5VyKtCKW3jfz4uMKmq3xu4N0nK BVoJQmx2LGVOmrqNjjJf2hHAQo/eDwJGTKhQMcgQEEAnEjFS98+RnW3smGkZU6ncCWav/4wYOnAI TihRL/4FEwbp28BXMMcoscQCVxlepL4IGDSCyJyVQOu0o7CjmLN50OZlqWmyFy5/6yBBuji0AxFR M00oQAqNIstqI6qKHUsWRAEAvagsmfUEAImyxgbmUpJk3IklNUtJOUAVLoUr1+wqDGTE4zk+T6FG uQb3SizBCwatiiUgCBN8vrz+zFjVyQ8FWkOlg4NQiZMB5QS8QO3mpOaKnL0Z2EKvNMSILEThKhCg zMKPVxYJh23qm9KNW7pArPynMqZDiErsTMqI+LRi3QAgkFUbXpuFKhSYZALd0O5RKa2z9EYKBbpb qxIKsjUPRgD7I2XYV6wyrOw92ykExP8NW4URhknC5dKGE4v4NENQj2jXjmfNgOZDaXb5glRmXQ33 YEWQYNcZFnrYcIQLNzyTFDQNkXIff0ExVlY4srziQk43inZgL4rwxxINMvpFFAz1KOODHiu+4aEw NEjFl5B3JIKWKF3k6I9bfUGp5ZZcdunll5IA4cuHvQQJ5gcsoCWOOUwgltIwAKRxJgbIkJAQZEq0 2YliZnpZZ4BH3CnYOXldOUOfQoYDqF1LFHbXCrO8xmRsfoXDXJ6ChjCAH3QlhJcT6VWE6FCkfCco CgrMFsROrIEX3o2whVjWDjoJccN3LdggSGXLCdLEgHr1lyU3O3QxhgohNKXJCWv8JQr/PDdaqd6w 2rj1inLiGeiCJoDspAoQlYE6QWLSECehcWIYxIQES6zhbn1iImTHEQyqJ4eIxJJoUBc+3CbBuwZE V5cJPPkIjFDdeEabQbd6WgICTxiiz0f5dBKquXF6k4senwEhYGnKEFJeGrxUZy8dB8gmAXI/sPvH ESfCwVt5hTgYiqQqtdRNHQIU1PJ33ZqmzgE90OwLaoJcnMop1WiMmgkPHQRIrwgFuNV90A3doNKT mrKIN07AnGcI9BQjhCBN4RfA1qIZnMqorJCogKfGQnxSCDilTVIA0yl5ciTovgLuBDKFUDE9aQcw 9SA+rjSNf9/M1gxrj6VwDTS0IUSElMzBfsj0NFXR2kwsV1A5IF1grLgLL/r1R40BZEnuBWgmQEyb jqRwSAt6bqMCOFkvKFN2GPPkUzIm/SCF8z8pVzpbjVnMsy0vOr1hw3SaSRUhpY09v0z0J1FnwzPl fmh+xl4WtR0zGu24I4KbMQm3lnVu2oNWxI9W/lcyzA+mCKF4DBikxb/+UWtOGRiFP8qEwAayIgIA Ow== --0__=0ABBF80DDFF9AD068f9e8a93df938690918c0ABBF80DDFF9AD06 Content-type: image/gif; name="ecblank.gif" Content-Disposition: inline; filename="ecblank.gif" Content-ID: <30__=0ABBF80DDFF9AD068f9e8a93df93@urscorp.com> Content-transfer-encoding: base64 R0lGODlhEAABAIAAAAAAAP///yH5BAEAAAEALAAAAAAQAAEAAAIEjI8ZBQA7 --0__=0ABBF80DDFF9AD068f9e8a93df938690918c0ABBF80DDFF9AD06-- ----------------------------------------------------------- X-Message-Number: 14 X-lyris-Id: 153079 Date: Mon, 19 Mar 2007 08:49:39 -0500 From: "Sillah Kargbo" Subject: Hi Ladies and Gentlemen: Hi Ladies and Gentlemen: Below is the SNOW section from my ECHO file. I have also included at the = end my input table for SNOW- PARM1. I wonder if you could take a look at = the errors and input data and advise me what you see i am doing wrong. I = am modelling with BASINS 3.1. PROCESSING INPUT FOR SECTION SNOW PROCESSING: ICE-FLAG 1 =20 Ice- flag 1 FINISHED PROCESSING ENTRIES IN THIS TABLE PROCESSING: SNOW-FLAGS 1 =20 SNOPFG VMKFG 1 0 FINISHED PROCESSING ENTRIES IN THIS TABLE PROCESSING: SNOW-PARM1 1 =20 LAT MELEV SHADE SNOWCF COVIND KMELT TBASE degrees (m) (mm) (mm/d.C) (C) =20 =20 **************************************************************************= ********** * = * * ERROR/WARNING ID: 218 14 = * * = * * Operation : IMPLND Number : 201 = * * Table : SNOW-PARM1 Subscrpt: 1 = * * Parameter : 1 Value : 02 44 = * * = * * Unable to convert value entered into a real number. = * * = * **************************************************************************= ********** =20 =20 =20 **************************************************************************= ********** * = * * ERROR/WARNING ID: 218 3 = * * = * * Operation : IMPLND Number : 201 = * * Table : SNOW-PARM1 Subscrpt: 1 = * * Parameter : 1 Value : 2.0000E+08 = * * = * * Allowed Min : -90.00 Max : 90.00 = * * = * * Set to Default : 40.00 = * * = * **************************************************************************= ********** =20 =20 =20 **************************************************************************= ********** * = * * ERROR/WARNING ID: 218 14 = * * = * * Operation : IMPLND Number : 201 = * * Table : SNOW-PARM1 Subscrpt: 1 = * * Parameter : 3 Value : 0 0 = * * = * * Unable to convert value entered into a real number. = * * = * **************************************************************************= ********** =20 =20 =20 **************************************************************************= ********** * = * * ERROR/WARNING ID: 218 14 = * * = * * Operation : IMPLND Number : 201 = * * Table : SNOW-PARM1 Subscrpt: 1 = * * Parameter : 4 Value : .3 1 = * * = * * Unable to convert value entered into a real number. = * * = * **************************************************************************= ********** =20 =20 =20 **************************************************************************= ********** * = * * ERROR/WARNING ID: 218 3 = * * = * * Operation : IMPLND Number : 201 = * * Table : SNOW-PARM1 Subscrpt: 1 = * * Parameter : 4 Value : 0.30 = * * = * * Allowed Min : 1.00 Max : 100.00 = * * = * * Set to Default : -999.00 = * * = * **************************************************************************= ********** =20 =20 =20 **************************************************************************= ********** * = * * ERROR/WARNING ID: 218 3 = * * = * * Operation : IMPLND Number : 201 = * * Table : SNOW-PARM1 Subscrpt: 1 = * * Parameter : 5 Value : 0.20 = * * = * * Allowed Min : 0.25 Max : -999.00 = * * = * * Set to Default : -999.00 = * * = * **************************************************************************= ********** =20 =20 =20 **************************************************************************= ********** * = * * ERROR/WARNING ID: 218 14 = * * = * * Operation : IMPLND Number : 201 = * * Table : SNOW-PARM1 Subscrpt: 1 = * * Parameter : 6 Value : 25 2. = * * = * * Unable to convert value entered into a real number. = * * = * **************************************************************************= ********** =20 =20 =20 **************************************************************************= ********** * = * * ERROR/WARNING ID: 218 3 = * * = * * Operation : IMPLND Number : 201 = * * Table : SNOW-PARM1 Subscrpt: 1 = * * Parameter : 7 Value : 65.00 = * * = * * Allowed Min : -20.00 Max : 20.00 = * * = * * Set to Default : 0.00 = * * = * **************************************************************************= ********** =20 40.0 .6 0 0 -999. -999.25 2. 0.00 4.000E+01 6.000E-01 0.000E+00-9.990E+02-9.990E+02 2.500E+08 0.000E+00 FINISHED PROCESSING ENTRIES IN THIS TABLE SNOW-PARM1 INPUT TABLE OpNum Description LAT MELEV SHADE SNOWCF = COVIND KMELT TBASE=20 902 Urban/ Infrastructur 44.6 0 0.3 1.2 25 = 2.65 0 901 Urban/ High Intensit 44.6 0 0.3 1.2 25 = 2.65 0 802 Urban/ Infrastructur 44.6 0 0.3 1.2 25 = 2.65 0 801 Urban/ High Intensit 44.6 0 0.3 1.2 25 = 2.65 0 702 Urban/ Infrastructur 44.6 0 0.3 1.2 25 = 2.65 0 701 Urban/ High Intensit 44.6 0 0.3 1.2 25 = 2.65 0 602 Urban/ Infrastructur 44.6 0 0.3 1.2 25 = 2.65 0 601 Urban/ High Intensit 44.6 0 0.3 1.2 25 = 2.65 0 502 Urban/ Infrastructur 44.6 0 0.3 1.2 25 = 2.65 0 501 Urban/ High Intensit 44.6 0 0.3 1.2 25 = 2.65 0 402 Urban/ Infrastructur 44.6 0 0.3 1.2 25 = 2.65 0 401 Urban/ High Intensit 44.6 0 0.3 1.2 25 = 2.65 0 302 Urban/ Infrastructur 44.6 0 0.3 1.2 25 = 2.65 0 301 Urban/ High Intensit 44.6 0 0.3 1.2 25 = 2.65 0 202 Urban/ Infrastructur 44.6 0 0.3 1.2 25 = 2.65 0 201 Urban/ High Intensit 44.6 0 0.3 1.2 25 = 2.65 0 102 Urban/ Infrastructur 44.6 0 0.3 1.2 25 = 2.65 0 101 Urban/ High Intensit 44.6 0 0.3 1.2 25 = 2.65 0 Thanks for your time and help. My best regards, G.A. Sillah Kargbo, PhD, P.Eng. Water Resources Engineer, Source Protection Planning c/o Lake Simcoe Region Conservation Authority 120 Bayview Parway Newmarket, Ontario L3Y 3W3 Tel: (905) 895-1281 ext 309 Fax: (905) 853-5881 E-mail: s.kargbo@lsrca.on.ca ----------------------------------------------------------- X-Message-Number: 15 X-lyris-Id: 153144 Date: Tue, 20 Mar 2007 14:05:01 -0500 (CDT) From: Subject: Correspondence relationship of the soil classifications in STATSGO and SSURGO RGVhciBCQVNJTlMgdXNlcnMsDQoNCkluIG91ciBwcm9qZWN0IHR3byB3YXRlcnNoZWRzIGhh dmUgYmVlbiBkZWxpbmVhdGVkIHVzaW5nIHRoZSBzb2lsIGRhdGEgZnJvbSBTVEFUU0dPIGFu ZCBTU1VSR08gcmVzcGVjdGl2ZWx5LiBGb3IgYSBjb21wYXJpc29uIHN0dWR5IHB1cnBvc2Us IEkgd291bGQgbGlrZSB0byBmaW5kIHRoZSBjb3JyZXNwb25kZW5jZSByZWxhdGlvbnNoaXAg YmV0d2VlbiB0aGUgY2xhc3NpZmljYXRpb25zIG9mIG1hcCB1bml0cyBpbiB0d28gZGF0YWJh c2VzLiBGb3IgZXhhbXBsZSwgaW4gdGhlIHR3byB3YXRlcnNoZWRzIHRoYXQgaGF2ZSBiZWVu IGRlbGluZWF0ZWQsIHRoZSBtYXAgdW5pdHMgd2l0aCB0aGUgZm9sbG93aW5nIHNvaWwgY2xh c3NpZmljYXRpb25zIHdlcmUgZm91bmQ6DQoNClNTVVJHTyAgU1NVUkdPDQoNCkE2ODA5NTMg ICBJTDAwMw0KQTY4MDg1OCAgIElMMDM2DQpBNjgwOTUwICAgSUwwNzANCuKApiAgICAgICAg ICAgICAg4oCmDQoNCldoYXQgSSB3b3VsZCBsaWtlIHRvIGtub3cgaXMgd2hpY2ggdW5pdHMg aW4gU1NVUkdPIGRhdGEgYmFzZSBjYW4gZ29lcyB0byB0aGUgY2F0ZWdvcmllcywgZS5nLiwg IElMMDAzLCBpbiBTVEFUU0dPLCBldGMuLg0KDQpEb2VzIHN1Y2ggYW4gZXN0YWJsaXNoZWQg Y29ycmVzcG9uZGVuY2UgcmVsYXRpb25zaGlwIGV4aXN0PyBBbnkgaGVscCB3aWxsIGJlIGFw cHJlY2lhdGVkLg0KDQpIdWEgWGllDQpQaEQgQ2FuZGlkYXRlDQpEZXBhcnRtZW50IG9mIENp dmlsIGFuZCBFbnZpcm9ubWVudGFsIEVuZ2luZWVyaW5nDQpVbml2ZXJzaXR5IG9mIElsbGlu b2lzIGF0IFVyYmFuYS1DaGFtcGFpZ24NCg== ----------------------------------------------------------- X-Message-Number: 16 X-lyris-Id: 153146 Date: Tue, 20 Mar 2007 14:32:09 -0500 From: "Debabrata Sahoo" Subject: Initial Met Station in WinHSPF Hello! Folks, I am trying to run HSPF (WinHSPF environment) for which I have three wdm files. When I try to pull these three wdm files in WinHSPF, only two of them are getting populated. The stations are populated in "Initial Met Station" space. Any clue. Thanks, Deb ******************************************************************************** ***************** Debabrata Sahoo Research and Teaching Assistant Doctoral Candidate: Biological and Agricultural Engineering (Focus:Urban Hydrology/Water Resources/Aquatic Biogeochemistry/Ecological Engineering/Spatial Technologies) Texas A and M University, College Station, 77840 Phone: 979-845-4560 (O) 979-268-7890 (R) ******************************************************************************** ***************** ----------------------------------------------------------- X-Message-Number: 17 X-lyris-Id: 153165 Date: Wed, 21 Mar 2007 14:40:49 -0000 From: "Sam Mryyan." Subject: NAD83utm? Dear all, I am working on modeling groundwater wells. The xy location of the wells are given in NAD83utm. I would like to add more wells for the computer to model. These additional wells will be 50ft each away from the actual well. I am not sure how to do this. Below is an example of the coordinates I am using. Any help explaining this process would be appreciated. X_NAD83utm Y_NAD83utm 370877.720107999 4616923.47935 370870.028747999 4616969.52636 371281.952461000 4616942.26841 371114.112333000 4616246.50213 ----------------------------------------------------------- X-Message-Number: 18 X-lyris-Id: 153197 Date: Wed, 21 Mar 2007 12:59:00 -0400 From: "Dan Tufford" Subject: RE: NAD83utm? Hello Sam, Without too much detail, UTM coordinates are meters east (X coordinate) and north (Y coordinate) of a reference point. So when you select where you want the new wells to be you just use a little geometry and arithmetic to determine the new coordinates. If you use, or know someone with access to, ArcGIS you can let the computer do the math. I hope this helps. Regards, Daniel L. Tufford, Ph.D. University of South Carolina Department of Biological Sciences 209A Sumwalt (office) 701 Sumter St, Room 401 (mail) Columbia, SC 29208 Ph. 803-777-3292, Fx: 803-777-3292 e-mail: tufford@sc.edu web: http://www.biol.sc.edu/~tufford -----Original Message----- From: Sam Mryyan. [mailto:SAM.MRYYAN@us.army.mil] Sent: Wednesday, March 21, 2007 10:41 AM To: Private list for BASINS users Subject: [basinsinfo] NAD83utm? Dear all, I am working on modeling groundwater wells. The xy location of the wells are given in NAD83utm. I would like to add more wells for the computer to model. These additional wells will be 50ft each away from the actual well. I am not sure how to do this. Below is an example of the coordinates I am using. Any help explaining this process would be appreciated. X_NAD83utm Y_NAD83utm 370877.720107999 4616923.47935 370870.028747999 4616969.52636 371281.952461000 4616942.26841 371114.112333000 4616246.50213 ------------------------------------------ You are currently subscribed to the basinsinfo listserver. To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov OR: Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your subscription. OR Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov ------------------------------------------ ----------------------------------------------------------- X-Message-Number: 19 X-lyris-Id: 153247 Date: Thu, 22 Mar 2007 11:32:58 -0500 From: "Debabrata Sahoo" Subject: HSPF error message. Hello! Folks, I am working on San Antonio Watershed. While running HSPF, I got following error message. Any clue. Thanks in advance. ******************************************************************************** **** * * * ERROR/WARNING ID: 217 98 * * * * VOLNO: 13 * * WDMSFL: 2 * * * * Specified dataset was not found in the WDM file. * * * ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 17* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 14* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 15* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **! ** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 13* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 17* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 14* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** *******************************************************************************! ***** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 15* * WDMSFL : 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 53* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 57* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 54* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ***************! ********************************************************************* ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 55* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 53* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 57* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ************! ********************************************************************** ** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 54* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 55* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 73* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 77* * WDMSFL: 2* ** * S! pecified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 74* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 75* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ******************************************************************************** **** ** * The count for the ERROR printed above has reached its maximum.* ** * T! he RUN has been terminated.* ** ************************************** ********************************************** ******************************************************************************** ****Deb************************************************************************* ************************Debabrata SahooResearch and Teaching AssistantDoctoral Candidate: Biological and Agricultural Engineering(Focus:Urban Hydrology/Water Resources/Aquatic Biogeochemistry/EcologicalEngineering/Spatial Technologies)Texas A and M University, College Station, 77840Phone: 979-845-4560 (O) 979-268-7890 (R)***************************************************************************** ********************----- Original Message -----From: To: "Private list for BASINS users" Sent: Tuesday, March 20, 2007 2:05 PMSubject: [basinsinfo] Correspondence relationship of the soilclassifications in STATSGO and SSURGO> Dear BASINS users,>> In our project two watersheds have been delineated using the soil datafrom STATSG! O and SSURGO respectively. For a comparison study purpose, Iwould like to find the correspondence relationship between theclassifications of map units in two databases. For example, in the twowatersheds that have been delineated, the map units with the following soilclassifications were found:>> SSURGO SSURGO>> A680953 IL003> A680858 IL036> A680950 IL070> ??? ???>> What I would like to know is which units in SSURGO data base can goes tothe categories, e.g., IL003, in STATSGO, etc..>> Does such an established correspondence relationship exist? Any help willbe appreciated.>> Hua Xie> PhD Candidate> Department of Civil and Environmental Engineering> University of Illinois at Urbana-Champaign>> ------------------------------------------> You are currently subscribed to the basinsinfo listserver.>> To unsubscribe, send the words unsubscribe basinsinfo tolyris@lists.epa.gov> OR:> Use the listserver's web interface athttps://lists.epa.gov/cgi-bin/lyris.pl to m! anage your> subscription.> OR> Contact the basinsinfo listserver owner atbasinsinfo-Owner@lists.epa.gov> ------------------------------------------ ----------------------------------------------------------- X-Message-Number: 20 X-lyris-Id: 153249 Date: Thu, 22 Mar 2007 13:04:47 -0400 From: Carleton.Jim@epamail.epa.gov Subject: Re: HSPF error message. Debabrata, It looks like some of the DSNs (numbers) specified in your uci file in the EXT SOURCES and/or EXT TARGETS blocks do not correspond with the DSNs for those same quantities in your wdm file. Take a look at these sections of your uci file (in a text editor), and use WdmUtil to see what the DSNs are in the wdm file. It might be easiest to renumber the entries in your uci so that they match the DSNs in your wdm. Debabrata Sahoo To Private list for BASINS users 03/22/2007 12:32 PM cc Subject Please respond [basinsinfo] HSPF error message. to Private list for BASINS users Hello! Folks, I am working on San Antonio Watershed. While running HSPF, I got following error message. Any clue. Thanks in advance. ******************************************************************************** **** * * * ERROR/WARNING ID: 217 98 * * * * VOLNO: 13 * * WDMSFL: 2 * * * * Specified dataset was not found in the WDM file. * * * ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 17* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 14* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 15* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **! ** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 13* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 17* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 14* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** *******************************************************************************! ***** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 15* * WDMSFL : 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 53* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 57* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 54* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ***************! ********************************************************************* ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 55* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 53* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 57* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ************! ********************************************************************** ** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 54* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 55* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 73* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 77* * WDMSFL: 2* ** * S! pecified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 74* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 75* * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** ******************************************************************************** **** ******************************************************************************** **** ******************************************************************************** **** ** * The count for the ERROR printed above has reached its maximum.* ** * T! he RUN has been terminated.* ** ************************************** ********************************************** ******************************************************************************** ****Deb************************************************************************* ************************Debabrata SahooResearch and Teaching AssistantDoctoral Candidate: Biological and Agricultural Engineering(Focus:Urban Hydrology/Water Resources/Aquatic Biogeochemistry/EcologicalEngineering/Spatial Technologies)Texas A and M University, College Station, 77840Phone: 979-845-4560 (O) 979-268-7890 (R)***************************************************************************** ********************----- Original Message -----From: To: "Private list for BASINS users" Sent: Tuesday, March 20, 2007 2:05 PMSubject: [basinsinfo] Correspondence relationship of the soilclassifications in STATSGO and SSURGO> Dear BASINS users,>> In our project two watersheds have been delineated using the soil datafrom STATSG! O and SSURGO respectively. For a comparison study purpose, Iwould like to find the correspondence relationship between theclassifications of map units in two databases. For example, in the twowatersheds that have been delineated, the map units with the following soilclassifications were found:>> SSURGO SSURGO>> A680953 IL003> A680858 IL036> A680950 IL070> ??? ???>> What I would like to know is which units in SSURGO data base can goes tothe categories, e.g., IL003, in STATSGO, etc..>> Does such an established correspondence relationship exist? Any help willbe appreciated.>> Hua Xie> PhD Candidate> Department of Civil and Environmental Engineering> University of Illinois at Urbana-Champaign>> ------------------------------------------> You are currently subscribed to the basinsinfo listserver.>> To unsubscribe, send the words unsubscribe basinsinfo tolyris@lists.epa.gov> OR:> Use the listserver's web interface athttps://lists.epa.gov/cgi-bin/lyris.pl to m! anage your> subscription.> OR> Contact the basinsinfo listserver owner atbasinsinfo-Owner@lists.epa.gov> ------------------------------------------ ------------------------------------------ You are currently subscribed to the basinsinfo listserver. To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov OR: Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your subscription. OR Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov ------------------------------------------ ----------------------------------------------------------- X-Message-Number: 21 X-lyris-Id: 153271 Date: Thu, 22 Mar 2007 12:53:30 -0500 From: "Sillah Kargbo" Subject: Re: HSPF error message. You must go to EXT SOURCES in the data input window (WinHSP) and manually = remove all those time series parameters not used in your model. WinHSPF = seem to generate them automatically, I guess they are defaults.=20 Good luck. G.A. Sillah Kargbo, PhD, P.Eng. Water Resources Engineer, Source Protection Planning c/o Lake Simcoe Region Conservation Authority 120 Bayview Parway Newmarket, Ontario L3Y 3W3 Tel: (905) 895-1281 ext 309 Fax: (905) 853-5881 E-mail: s.kargbo@lsrca.on.ca >>> dsahoo@tamu.edu 22/03/2007 12:32 pm >>> Hello! Folks, I am working on San Antonio Watershed. While running HSPF, I got = following=20 error message. Any clue. Thanks in advance. ***************************************************************************= ********* *=20 * * ERROR/WARNING ID: 217 98=20 * *=20 * * VOLNO: 13=20 * * WDMSFL: 2=20 * *=20 * * Specified dataset was not found in the WDM file.=20 * *=20 * **************************************************************************= ********** ****************************************************************= ******************** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: = 17* * WDMSFL: 2* ** * Specified dataset was not found in the WDM = file.* ** *****************************************************************= ******************* *******************************************************= ***************************** ** * ERROR/WARNING ID: 217 98* ** * = VOLNO: 14* * WDMSFL: 2* ** * Specified dataset was not found in = the WDM file.* ** *********************************************************= *************************** ***********************************************= ************************************* ** * ERROR/WARNING ID: 217 98* = ** * VOLNO: 15* * WDMSFL: 2* ** * Specified dataset was not = found in the WDM file.* ** ************************************************= **********************************! ** ***********************************************************************= ************* ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 13* * = WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** = ***************************************************************************= ********* *****************************************************************= ******************* ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 17* = * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* = ** ************************************************************************= ************ **************************************************************= ********************** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: = 14* * WDMSFL: 2* ** * Specified dataset was not found in the WDM = file.* ** *****************************************************************= ******************* *******************************************************= ************************! ***** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 15* * WDMSFL : 2* ** * Specified dataset was not found in the WDM file.* ** = ***************************************************************************= ********* *****************************************************************= ******************* ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 53* = * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* = ** ************************************************************************= ************ **************************************************************= ********************** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: = 57* * WDMSFL: 2* ** * Specified dataset was not found in the WDM = file.* ** *****************************************************************= ******************* *******************************************************= ***************************** ** * ERROR/WARNING ID: 217 98* ** * = VOLNO: 54* * WDMSFL: 2* ** * Specified dataset was not found in = the WDM file.* ** ***************! ********************************************************************* = ***************************************************************************= ********* ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 55* * = WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** = ***************************************************************************= ********* *****************************************************************= ******************* ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 53* = * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* = ** ************************************************************************= ************ **************************************************************= ********************** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: = 57* * WDMSFL: 2* ** * Specified dataset was not found in the WDM = file.* ** *****************************************************************= ******************* ************! ********************************************************************** ** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 54* * WDMSFL: = 2* ** * Specified dataset was not found in the WDM file.* ** *************= *********************************************************************** = ***************************************************************************= ********* ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 55* * = WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** = ***************************************************************************= ********* *****************************************************************= ******************* ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 73* = * WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* = ** ************************************************************************= ************ **************************************************************= ********************** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: = 77* * WDMSFL: 2* ** * S! pecified dataset was not found in the WDM file.* ** **********************= ************************************************************** ************= ************************************************************************ = ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 74* * WDMSFL: 2* = ** * Specified dataset was not found in the WDM file.* ** ****************= ******************************************************************** = ***************************************************************************= ********* ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 75* * = WDMSFL: 2* ** * Specified dataset was not found in the WDM file.* ** = ***************************************************************************= ********* *****************************************************************= ******************* *******************************************************= ***************************** ** * The count for the ERROR printed above = has reached its maximum.* ** * T! he RUN has been terminated.* ** ************************************** ********************************************** ****************************= ********************************************************Deb****************= ***************************************************************************= ******Debabrata SahooResearch and Teaching AssistantDoctoral Candidate: = Biological and Agricultural Engineering(Focus:Urban Hydrology/Water = Resources/Aquatic Biogeochemistry/EcologicalEngineering/Spatial Technologie= s)Texas A and M University, College Station, 77840Phone: 979-845-4560 (O) = 979-268-7890 (R)**************************************************= ***********************************************----- Original Message = -----From: To: "Private list for BASINS users" Sent: Tuesday, March 20, 2007 2:05 PMSubject: [basinsinfo] = Correspondence relationship of the soilclassifications in STATSGO and = SSURGO> Dear BASINS users,>> In our project two watersheds have been = delineated using the soil datafrom STATSG! O and SSURGO respectively. For a comparison study purpose, Iwould like to = find the correspondence relationship between theclassifications of map = units in two databases. For example, in the twowatersheds that have been = delineated, the map units with the following soilclassifications were = found:>> SSURGO SSURGO>> A680953 IL003> A680858 IL036> A680950 = IL070> ??? ???>> What I would like to know is which units in = SSURGO data base can goes tothe categories, e.g., IL003, in STATSGO, = etc..>> Does such an established correspondence relationship exist? Any = help willbe appreciated.>> Hua Xie> PhD Candidate> Department of Civil and = Environmental Engineering> University of Illinois at Urbana-Champaign>> = ------------------------------------------> You are currently subscribed = to the basinsinfo listserver.>> To unsubscribe, send the words unsubscribe = basinsinfo tolyris@lists.epa.gov> OR:> Use the listserver's web interface = athttps://lists.epa.gov/cgi-bin/lyris.pl to m! anage your> subscription.> OR> Contact the basinsinfo listserver owner atbasinsinfo-Owner@lists.epa.gov> ----------------------------------------= -- ------------------------------------------ You are currently subscribed to the basinsinfo listserver.=20 To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.go= v=20 OR: Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.p= l to manage your=20 subscription. OR Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov= =20 ------------------------------------------ ----------------------------------------------------------- X-Message-Number: 22 X-lyris-Id: 153310 Date: Fri, 23 Mar 2007 10:40:23 -0500 From: "Debabrata Sahoo" Subject: Re: HSPF error message. Hello! Folks, Please see the error below. PROCESSING OPN SEQUENCE BLOCK ******************************************************************************** **** ** * ERROR/WARNING ID: 211 26* ** * There are more operations in the opn sequence block than can fit into* * table OPNTAB. Thus, this operation will not be entered in the table.* ** ******************************************************************************** ****This error came when I tried to run my HSPF in DOS prompt. However, when Iran my model (HSPF) from WinHSPF environment, with the same UCI file, noerror was encountered. Any clue.Thanks in advance.Deb********************************************************************* ***************************Debabrata SahooResearch and Teaching AssistantDoctoral Candidate: Biological and Agricultural Engineering(Focus:Urban Hydrology/Water Resources/Aquatic Biogeochemistry/EcologicalEngineering/Spatial Technologies)Texas A and M University, College Station, 77840Phone: 979-845-4560 (O) 979-268-7890 (R)**************************! ***********************************************************************----- Original Message -----From: To: "Private list for BASINS users" Sent: Thursday, March 22, 2007 12:04 PMSubject: Re: [basinsinfo] HSPF error message.> Debabrata,>> It looks like some of the DSNs (numbers) specified in your uci file in> the EXT SOURCES and/or EXT TARGETS blocks do not correspond with the> DSNs for those same quantities in your wdm file. Take a look at these> sections of your uci file (in a text editor), and use WdmUtil to see> what the DSNs are in the wdm file. It might be easiest to renumber the> entries in your uci so that they match the DSNs in your wdm.>>>>> Debabrata Sahoo> > To> Private list for BASINS users> 03/22/2007 12:32 > ! PM cc>> Subject> Please respond [basinsinfo] HSPF error message.> to> Private list for> BASINS users> s.epa.gov>>>>>>>> Hello! Folks,>> I am working on San Antonio Watershed. While running HSPF, I got> following> error message. Any clue. Thanks in advance.>>********************************************************************** **************>> *> *> * ERROR/WARNING ID: 217 98> *> *> *> * VOLNO: 13> *> * WDMSFL: 2> *> *> *> * Specified dataset was not found in the WDM file.> *> *> *>>***************************************************************************** *******>>*********************************************************************** *************> ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 17* * WDMSFL:> 2* ** * Specified dataset was not found in the WDM file.* **>**********************! **************************************************************>>**************** ********************************************************************> ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 14* * WDMSFL:> 2* ** * Specified dataset was not found in the WDM file.* **>***************************************************************************** *******>>*********************************************************************** *************> ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 15* * WDMSFL:> 2* ** * Specified dataset was not found in the WDM file.* **>***************************************************************************** *****!>> **>***************************************************************************** *******> ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 13* * WDMSFL:> 2* ** * Specified dataset was not found in the WDM file.* **>***************************************************************************** *******>>******************! ******************************************************************> ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 17* * WDMSFL:> 2* ** * Specified dataset was not found in the WDM file.* **>***************************************************************************** *******>>*********************************************************************** *************> ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 14* * WDMSFL:> 2* ** * Specified dataset was not found in the WDM file.* **>***************************************************************************** *******>>*********************************************************************** ********!>> ***** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 15* * WDMSFL> : 2* ** * Specified dataset was not found in the WDM file.* **>***************************************************************************** *******>>*********************************************************************** *************> ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 53* * WDMSFL:> 2* ** * Spec! ified dataset was not found in the WDM file.* **>***************************************************************************** *******>>*********************************************************************** *************> ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 57* * WDMSFL:> 2* ** * Specified dataset was not found in the WDM file.* **>***************************************************************************** *******>>*********************************************************************** *************> ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 54* * WDMSFL:> 2* ** * Specified dataset was not found in the WDM file.* **> ***************!> *********************************************************************>********** **************************************************************************> ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 55* * WDMSFL:> 2* ** * Specified dataset was not found in the WDM file.* **>*********************************! ***************************************************>>***************** *******************************************************************> ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 53* * WDMSFL:> 2* ** * Specified dataset was not found in the WDM file.* **>***************************************************************************** *******>>*********************************************************************** *************> ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 57* * WDMSFL:> 2* ** * Specified dataset was not found in the WDM file.* **>***************************************************************************** *******> ************!> **********************************************************************> ** ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 54* * WDMSFL:> 2* ** * Specified dataset was not found in the WDM file.* **>***************************************************************************** *******>>*********************************************************************** *************> ** * ERROR/W! ARNING ID: 217 98* ** * VOLNO: 55* * WDMSFL:> 2* ** * Specified dataset was not found in the WDM file.* **>***************************************************************************** *******>>*********************************************************************** *************> ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 73* * WDMSFL:> 2* ** * Specified dataset was not found in the WDM file.* **>***************************************************************************** *******>>*********************************************************************** *************> ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 77* * WDMSFL:> 2* ** * S!> pecified dataset was not found in the WDM file.* **>***************************************************************************** *******>>*********************************************************************** *************> ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 74* * WDMSFL:> 2* ** * Specified dataset w! as not found in the WDM file.* **>************************************ ************************************************>>****************************** ******************************************************> ** * ERROR/WARNING ID: 217 98* ** * VOLNO: 75* * WDMSFL:> 2* ** * Specified dataset was not found in the WDM file.* **>***************************************************************************** *******>>*********************************************************************** *************>>***************************************************************** *******************> ** * The count for the ERROR printed above has reached its maximum.*> ** * T!> he RUN has been terminated.* ** **************************************> **********************************************>********************************* ***************************************************Deb************************** ***********************************************************************Debabrata > SahooResearch and Teaching AssistantDoctoral Candidate: Biological and>! Agricultural Engineering(Focus:Urban Hydrology/Water Resources/Aquatic> Biogeochemistry/EcologicalEngineering/Spatial Technologies)Texas A and M> University, College Station, 77840Phone: 979-845-4560 (O)> 979-268-7890>(R)**************************************************************** *********************************-----> Original Message -----From: To: "Private list for> BASINS users" Sent: Tuesday, March 20, 2007> 2:05 PMSubject: [basinsinfo] Correspondence relationship of the> soilclassifications in STATSGO and SSURGO> Dear BASINS users,>> In our> project two watersheds have been delineated using the soil datafrom> STATSG!> O and SSURGO respectively. For a comparison study purpose, Iwould like> to find the correspondence relationship between theclassifications of> map units in two databases. For example, in the twowatersheds that have> been delineated, the map units with the following soilclassifications> were found:>> SSURGO ! SSURGO>> A680953 IL003> A680858 IL036> A680950> IL070> ??? ???>> What I would like to know is which units> in SSURGO data base can goes tothe categories, e.g., IL003, in STATSGO,> etc..>> Does such an established correspondence relationship exist? Any> help willbe appreciated.>> Hua Xie> PhD Candidate> Department of Civil> and Environmental Engineering> University of Illinois at> Urbana-Champaign>> ------------------------------------------> You are> currently subscribed to the basinsinfo listserver.>> To unsubscribe,> send the words unsubscribe basinsinfo tolyris@lists.epa.gov> OR:> Use> the listserver's web interface athttps://lists.epa.gov/cgi-bin/lyris.pl> to m!> anage your> subscription.> OR> Contact the basinsinfo listserver owner> atbasinsinfo-Owner@lists.epa.gov>> ------------------------------------------>>> ------------------------------------------> You are currently subscribed to the basinsinfo listserver.>> To unsubscribe, send the words unsubscribe basinsinfo to> lyris@lists.epa.gov> OR:> Use the listserver's w! eb interface at> https://lists.epa.gov/cgi-bin/lyris.pl to manage your> subscription.> OR> Contact the basinsinfo listserver owner at> basinsinfo-Owner@lists.epa.gov> ------------------------------------------>>>> ------------------------------------------> You are currently subscribed to the basinsinfo listserver.>> To unsubscribe, send the words unsubscribe basinsinfo tolyris@lists.epa.gov> OR:> Use the listserver's web interface athttps://lists.epa.gov/cgi-bin/lyris.pl to manage your> subscription.> OR> Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov> ------------------------------------------> ----------------------------------------------------------- X-Message-Number: 23 X-lyris-Id: 153375 Date: Tue, 27 Mar 2007 09:19:23 -0400 From: "Bijhouwer, Paul LRB" Subject: NYSKIP in BASINS SWAT2000 Hi,=20 I am posting this message to both the EPA BASINS listserver and the = SWAT-user Google Group.=20 I am trying to use the NYSKIP variable in the .cod file to skip output generation for the first year of my simulation (warm-up period). I have = a BASINS SWAT2000 model that runs successfully with the default value of = NYSKIP =3D 0.=20 Since there is no access to this variable through the GIS interface I = tried editing the basins.cod file directly. However, after editing if I run = the simulation through BASINS, BASINS reports the model did not run = successfully. On the other hand, if I run SWAT directly from a DOS window, SWAT = reports "Execution successfully completed."=20 Is BASINS is making a check between the input simulation period and the generated output and assuming failure because the number of years is not = the same?=20 I tried to fool BASINS by=20 1. Running SWAT with NYSKIP =3D 0 (run successful)=20 2. NOT immediately reading the simulation results=20 3. Manually editing BASINS.COD to set NYSKIP =3D 1=20 4. Running SWAT again from the DOS window=20 5. Selecting "Read Results" from the BASINS Simulation menu.=20 Unfortunately this did not work. BASINS reported that the SWAT run was = not successful, and refused to read the simulation results.=20 Is there a way to use the NYSKIP option of SWAT when running = BASINS/SWAT2000? If so, how should I do it?=20 Thanks,=20 Paul=20 ----------------------------------------------------------- X-Message-Number: 24 X-lyris-Id: 153416 Date: Tue, 27 Mar 2007 14:55:17 +0000 From: "harshad patel" Subject: Re: Flow result

Hi,

I am getting strange output for flow. I am running HSPF for fifteen year and  flow output at  outlet is not responding  properly. I mean does not shows any peak. It is just constantly increasing over time. Anyone have anytype of suggestion what could be the problem?

Thanks in advance. 
-Harshad Patel


Buy, Load, Play. The new Sympatico / MSN Music Store works seamlessly with Windows Media Player. Just Click PLAY. ----------------------------------------------------------- X-Message-Number: 25 X-lyris-Id: 153426 Date: Wed, 28 Mar 2007 06:54:42 -0500 From: "Sillah Kargbo" Subject: Re:Flow result Hi Harshad, My assistant and I have had that problem in two models in which we = attempted to use the BASINS generated FTABLES. Our hydrographs were fine = when we prepared the FTABLES outside BASINS, from HEC-RAS. I suspect this = kind of problem has to do with the FTABLES. Other people may suggest other = solution, so wait and see if my approach does not resolve your problem.=20 Good luck G.A. Sillah Kargbo, PhD, P.Eng. Water Resources Engineer, Source Protection Planning c/o Lake Simcoe Region Conservation Authority 120 Bayview Parway Newmarket, Ontario L3Y 3W3 Tel: (905) 895-1281 ext 309 Fax: (905) 853-5881 E-mail: s.kargbo@lsrca.on.ca >>> harshadsaroj@hotmail.com 27/03/2007 10:55 am >>> Hi, I am getting strange output for flow. I am running HSPF for fifteen year = and flow output at outlet is not responding properly. I mean does not = shows any peak. It is just constantly increasing over time. Anyone have = anytype of suggestion what could be the problem? Thanks in advance.=20 -Harshad Patel=20 Buy, Load, Play. The new Sympatico / MSN Music Store works seamlessly with = Windows Media Player. Just Click PLAY. ------------------------------------= ------=20 You are currently subscribed to the basinsinfo listserver.=20 To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.go= v=20 OR:=20 Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.p= l to manage your=20 subscription.=20 OR=20 Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov= =20 ------------------------------------------=20 ----------------------------------------------------------- X-Message-Number: 26 X-lyris-Id: 153476 Date: Wed, 28 Mar 2007 15:22:14 -0600 From: "Jennifer Morgan" Subject: watershed delineation problems ------=_Part_20305_2005963.1175116934719 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline The automatic watershed delineation tool in Basins 4 is producing very strange delineations that don't make any sense for the outlets I've selected for my watershed. For example, there is a single outlet that is producing three side by side subbasins on a single stream channel (one long, narrow subbasin runs along the stream channel, with two large subbasins attached to either side like a pair of elephant ears). I have used this exact same set of data in Basins 3.1, as well as in ArcHydro, and have never gotten these results. So I have two questions: Is there a new update to the delineation tool for Basins 4? In a previous listserve email someone asked about being able to delete automatically created outlets so as to merge unnecessary subbasins. I downloaded the "un-tested" plugin that was mentioned in that thread, but it locks up when it gets to the merging process and it causes the program to be "not responding". Also, I would like to go back to using Basins 3.1, but I can't find the download for it on the EPA website. The update #8 and the data sets are all there, but I can't seem to find the actual Basins program. Does anyone have any suggestions or know where I can find it? Thank you, Jennifer Morgan ------=_Part_20305_2005963.1175116934719 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline The automatic watershed delineation tool in Basins 4 is producing very strange delineations that don't make any sense for the outlets I've selected for my watershed.  For example, there is a single outlet that is producing three side by side subbasins on a single stream channel (one long, narrow subbasin runs along the stream channel, with two large subbasins attached to either side like a pair of elephant ears).  I have used this exact same set of data in Basins 3.1, as well as in ArcHydro, and have never gotten these results.  So I have two questions:

Is there a new update to the delineation tool for Basins 4?  In a previous listserve email someone asked about being able to delete automatically created outlets so as to merge unnecessary subbasins.  I downloaded the "un-tested" plugin that was mentioned in that thread, but it locks up when it gets to the merging process and it causes the program to be "not responding".

Also, I would like to go back to using Basins 3.1, but I can't find the download for it on the EPA website.  The update #8 and the data sets are all there, but I can't seem to find the actual Basins program.  Does anyone have any suggestions or know where I can find it?

Thank you,
Jennifer Morgan



------=_Part_20305_2005963.1175116934719-- ----------------------------------------------------------- X-Message-Number: 27 X-lyris-Id: 153480 Date: Thu, 29 Mar 2007 04:17:30 -0000 From: "Daniel P. Ames" Subject: re: watershed delineation problems Jennifer, I'd like to look at your data. Can you send me a zip file with a sample piece of the DEM and the point/outlet you are using? It's probable that the recent update to AWD fixes this error, but I can do a quick check here. (If you'd like just email a zip file with the sample data to amesdani @ isu.edu) Dan ----------------------------------------------------------- X-Message-Number: 28 X-lyris-Id: 153481 Date: Thu, 29 Mar 2007 07:30:00 -0500 From: Partington.Ed@epamail.epa.gov Subject: Re: watershed delineation problems I apologize. We have been making structural changes in the web site and the link is hard to find. The BASINS 3.1 executable can be found at the download web page http://www.epa.gov/waterscience/basins/b3webdwn.htm Click the "readme" link. At the bottom under "Installation Procedures" you will see a link to "basins31.zip". EPA/OW/OST/SHPD/RSTSSB/BASINS Jennifer Morgan To Sent by: Private list for BASINS users jemorgan22@gmail .com cc Subject 03/28/2007 04:22 [basinsinfo] watershed PM delineation problems Please respond to Private list for BASINS users The automatic watershed delineation tool in Basins 4 is producing very strange delineations that don't make any sense for the outlets I've selected for my watershed. For example, there is a single outlet that is producing three side by side subbasins on a single stream channel (one long, narrow subbasin runs along the stream channel, with two large subbasins attached to either side like a pair of elephant ears). I have used this exact same set of data in Basins 3.1, as well as in ArcHydro, and have never gotten these results. So I have two questions: Is there a new update to the delineation tool for Basins 4? In a previous listserve email someone asked about being able to delete automatically created outlets so as to merge unnecessary subbasins. I downloaded the "un-tested" plugin that was mentioned in that thread, but it locks up when it gets to the merging process and it causes the program to be "not responding". Also, I would like to go back to using Basins 3.1, but I can't find the download for it on the EPA website. The update #8 and the data sets are all there, but I can't seem to find the actual Basins program. Does anyone have any suggestions or know where I can find it? Thank you, Jennifer Morgan ------------------------------------------ You are currently subscribed to the basinsinfo listserver. To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov OR: Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your subscription. OR Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov ------------------------------------------ ----------------------------------------------------------- X-Message-Number: 29 X-lyris-Id: 153492 Date: Thu, 29 Mar 2007 11:30:26 -0600 From: "Serele, Charles" Subject: Read ArcGIS data in BASINS This is a multi-part message in MIME format. ------_=_NextPart_001_01C77227.F032B4BC Content-Type: multipart/alternative; boundary="----_=_NextPart_002_01C77227.F032B4BC" ------_=_NextPart_002_01C77227.F032B4BC Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi All, =20 I am a new user of BASINS and I need help for automatic watershed delineation. My ArcGIS data are in a geodatabase and I would like to import these data into BASINS to work on it. How can I do that ? Can anyone help me. =20 Thanks in advance, =20 Charles ------_=_NextPart_002_01C77227.F032B4BC Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Message
Hi=20 All,
 
I = am a new user=20 of BASINS and I need help for automatic watershed delineation. My ArcGIS = data=20 are in a geodatabase and I would like to import these data into = BASINS to=20 work on it. How can I do that ? Can anyone help me.
 
Thanks in=20 advance,
 
Charles
------_=_NextPart_002_01C77227.F032B4BC-- ------_=_NextPart_001_01C77227.F032B4BC Content-Type: image/jpeg; name="Glacier Bkgrd.jpg" Content-Transfer-Encoding: base64 Content-ID: <488022717@29032007-3183> Content-Description: Glacier Bkgrd.jpg Content-Location: Glacier%20Bkgrd.jpg /9j/4AAQSkZJRgABAgEASABIAAD/7QSqUGhvdG9zaG9wIDMuMAA4QklNA+kAAAAAAHgAAwAAAEgA SAAAAAAC2gIo/+H/4QL5AkUDRwUoA/wAAgAAAEgASAAAAAAC2AIoAAEAAABkAAAAAQADAwMAAAAB Jw8AAQABAAAAAAAAAAAAAAAAYAgAGQGQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA4 QklNA+0AAAAAABAASAAAAAEAAQBIAAAAAQABOEJJTQPzAAAAAAAIAAAAAAAAAAA4QklNBAoAAAAA AAEAADhCSU0nEAAAAAAACgABAAAAAAAAAAI4QklNA/UAAAAAAEgAL2ZmAAEAbGZmAAYAAAAAAAEA L2ZmAAEAoZmaAAYAAAAAAAEAMgAAAAEAWgAAAAYAAAAAAAEANQAAAAEALQAAAAYAAAAAAAE4QklN A/gAAAAAAHAAAP////////////////////////////8D6AAAAAD///////////////////////// ////A+gAAAAA/////////////////////////////wPoAAAAAP////////////////////////// //8D6AAAOEJJTQQAAAAAAAACAAA4QklNBAIAAAAAAAIAADhCSU0ECAAAAAAAEAAAAAEAAAJAAAAC QAAAAAA4QklNBAkAAAAAApkAAAABAAAAgAAAAAEAAAGAAAABgAAAAn0AGAAB/9j/4AAQSkZJRgAB AgEASABIAAD//gAnRmlsZSB3cml0dGVuIGJ5IEFkb2JlIFBob3Rvc2hvcKggNC4wAP/uAA5BZG9i ZQBkgAAAAAH/2wCEAAwICAgJCAwJCQwRCwoLERUPDAwPFRgTExUTExgRDAwMDAwMEQwMDAwMDAwM DAwMDAwMDAwMDAwMDAwMDAwMDAwBDQsLDQ4NEA4OEBQODg4UFA4ODg4UEQwMDAwMEREMDAwMDAwR DAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDP/AABEIAAEAgAMBIgACEQEDEQH/3QAEAAj/xAE/ AAABBQEBAQEBAQAAAAAAAAADAAECBAUGBwgJCgsBAAEFAQEBAQEBAAAAAAAAAAEAAgMEBQYHCAkK CxAAAQQBAwIEAgUHBggFAwwzAQACEQMEIRIxBUFRYRMicYEyBhSRobFCIyQVUsFiMzRygtFDByWS U/Dh8WNzNRaisoMmRJNUZEXCo3Q2F9JV4mXys4TD03Xj80YnlKSFtJXE1OT0pbXF1eX1VmZ2hpam tsbW5vY3R1dnd4eXp7fH1+f3EQACAgECBAQDBAUGBwcGBTUBAAIRAyExEgRBUWFxIhMFMoGRFKGx QiPBUtHwMyRi4XKCkkNTFWNzNPElBhaisoMHJjXC0kSTVKMXZEVVNnRl4vKzhMPTdePzRpSkhbSV xNTk9KW1xdXl9VZmdoaWprbG1ub2JzdHV2d3h5ent8f/2gAMAwEAAhEDEQA/APTqPon4/wAAir5X SQGyn6oSXyukip+qEl8rpJKfqhJfK6SSn6oSXyukkp+qEl8rpJKfqhJfK6SSn6oSXyukkp//2QA4 QklNBAYAAAAAAAcABAAAAAEBAP/+ACdGaWxlIHdyaXR0ZW4gYnkgQWRvYmUgUGhvdG9zaG9wqCA0 LjAA/+4ADkFkb2JlAGQAAAAAAf/bAIQABgQEBwUHCwYGCw4KCAoOEQ4ODg4RFhMTExMTFhEMDAwM DAwRDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAEHCQkTDBMiExMiFA4ODhQUDg4ODhQRDAwM DAwREQwMDAwMDBEMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwM/8AAEQgAAwZAAwERAAIRAQMR Af/dAAQAyP/EAaIAAAAHAQEBAQEAAAAAAAAAAAQFAwIGAQAHCAkKCwEAAgIDAQEBAQEAAAAAAAAA AQACAwQFBgcICQoLEAACAQMDAgQCBgcDBAIGAnMBAgMRBAAFIRIxQVEGE2EicYEUMpGhBxWxQiPB UtHhMxZi8CRygvElQzRTkqKyY3PCNUQnk6OzNhdUZHTD0uIIJoMJChgZhJRFRqS0VtNVKBry4/PE 1OT0ZXWFlaW1xdXl9WZ2hpamtsbW5vY3R1dnd4eXp7fH1+f3OEhYaHiImKi4yNjo+Ck5SVlpeYmZ qbnJ2en5KjpKWmp6ipqqusra6voRAAICAQIDBQUEBQYECAMDbQEAAhEDBCESMUEFURNhIgZxgZEy obHwFMHR4SNCFVJicvEzJDRDghaSUyWiY7LCB3PSNeJEgxdUkwgJChgZJjZFGidkdFU38qOzwygp 0+PzhJSktMTU5PRldYWVpbXF1eX1RlZmdoaWprbG1ub2R1dnd4eXp7fH1+f3OEhYaHiImKi4yNjo +DlJWWl5iZmpucnZ6fkqOkpaanqKmqq6ytrq+v/aAAwDAQACEQMRAD8A9N/vv+Lv+SWFhv5/7F37 7/i7/kliu/n/ALFbJ63H/dv0+lTFd/P/AGKj++/y/wDkliu/n/sVa29Tl8fSn7fCn/JPfFIRH/AY GTv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Bi rv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/w GKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3 /AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd /wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFX f8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gM Vd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+ AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8A gMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/ 4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq 7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wAB irv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Bi rv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/w GKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3 /AYq/wD/2Q== ------_=_NextPart_001_01C77227.F032B4BC-- ----------------------------------------------------------- X-Message-Number: 30 X-lyris-Id: 153546 Date: Thu, 29 Mar 2007 13:09:41 -0500 From: Partington.Ed@epamail.epa.gov Subject: Re: Read ArcGIS data in BASINS BASINS 4 will accept shapefile format (stream network and watershed boundary) and TIFF image format (elevation DEM). BASINS 3.1 with the ArcView Spatial Analyst extension will also accept GRID format (elevation DEM). You can export shapefiles and TIFF images from ArcGIS. EPA/OW/OST/SHPD/RSTSSB/BASINS "Serele, Charles" Private list for BASINS users 03/29/2007 12:30 cc PM Subject [basinsinfo] Read ArcGIS data in Please respond BASINS to Private list for BASINS users Hi All, I am a new user of BASINS and I need help for automatic watershed delineation. My ArcGIS data are in a geodatabase and I would like to import these data into BASINS to work on it. How can I do that ? Can anyone help me. Thanks in advance, Charles ------------------------------------------ You are currently subscribed to the basinsinfo listserver. To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov OR: Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your subscription. OR Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov ------------------------------------------ ----------------------------------------------------------- X-Message-Number: 31 X-lyris-Id: 153554 Date: Thu, 29 Mar 2007 14:51:52 -0600 From: "Daniel Ames" Subject: Fwd: Read ArcGIS data in BASINS ------=_Part_65620_23292458.1175201512838 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline Charles, Because ESRI Geodatabases are in a proprietary ESRI-only format, you will need to export them to a standard format before using them in BASINS. I recommend exporting your raster (DEM) data as GeoTIFF or ASCII-raster, and exporting your vector data as shapefiles. Then your data will be in a non-proprietary open format and can be read by any GIS related software including BASINS. Dan On 3/29/07, Serele, Charles wrote: > > Hi All, > > I am a new user of BASINS and I need help for automatic watershed > delineation. My ArcGIS data are in a geodatabase and I would like to import > these data into BASINS to work on it. How can I do that ? Can anyone help > me. > > Thanks in advance, > > Charles > ------------------------------------------ > You are currently subscribed to the basinsinfo listserver. > > To unsubscribe, send the words unsubscribe basinsinfo to > lyris@lists.epa.gov > OR: > Use the listserver's web interface at > https://lists.epa.gov/cgi-bin/lyris.pl to manage your > subscription. > OR > Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov > ------------------------------------------ > ------=_Part_65620_23292458.1175201512838 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline
Charles,

Because ESRI Geodatabases are in a proprietary ESRI-only format, you will need to export them to a standard format before using them in BASINS.  I recommend exporting your raster (DEM) data as GeoTIFF or ASCII-raster, and exporting your vector data as shapefiles. Then your data will be in a non-proprietary open format and can be read by any GIS related software including BASINS.

Dan


On 3/29/07, Serele, Charles < serelec@agr.gc.ca> wrote:
Hi All,
 
I am a new user of BASINS and I need help for automatic watershed delineation. My ArcGIS data are in a geodatabase and I would like to import these data into BASINS to work on it. How can I do that ? Can anyone help me.
 
Thanks in advance,
 
Charles
------------------------------------------
You are currently subscribed to the basinsinfo listserver.

To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov
OR:
Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your
subscription.
OR
Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov
------------------------------------------

------=_Part_65620_23292458.1175201512838-- ----------------------------------------------------------- X-Message-Number: 32 X-lyris-Id: 153567 Date: Thu, 29 Mar 2007 15:03:06 +0000 From: "harshad patel" Subject: Re: HYDR-PARM1 BLOCK


Hello Friends,

According to HSPF user manual, if  A  value  of 1  for AUX1FG, AUX2FG and AUX3FG  means subroutine  AUXIL will  be called to compute depth, stage, surface area, average depth, and  topwidth,  and  values  for  these parameters  will  be reported  in the  printout.    A value  of  0 supresses  the calculation and printout of this information. So if these value 0 either 1 can make effect in simulated flow results or those flag only for printout purpose only.

Does anyone have idea? please let me know.

Thanks.
-Harshad Patel


RealLiveMoms: Share your experience with Real Live Moms just like you. ----------------------------------------------------------- X-Message-Number: 33 X-lyris-Id: 153586 Date: Fri, 30 Mar 2007 08:05:09 -0700 From: Tony Donigian Subject: Re: HYDR-PARM1 BLOCK Harshad -
These flags only affect the printout of those auxiliary variables, and have no impact on the actual flow simulation.
Tony Donigian
Tony Donigian
AQUA TERRA Consultants
2685 Marine Way, Suite 1314
Mountain View, CA 94043-1115
650-962-1864; fax 650-962-0706


harshad patel wrote:


Hello Friends,

According to HSPF user manual, if  A  value  of 1  for AUX1FG, AUX2FG and AUX3FG  means subroutine  AUXIL will  be called to compute depth, stage, surface area, average depth, and  topwidth,  and  values  for  these parameters  will  be reported  in the  printout.    A value  of  0 supresses  the calculation and printout of this information. So if these value 0 either 1 can make effect in simulated flow results or those flag only for printout purpose only.

Does anyone have idea? please let me know.

Thanks.
-Harshad Patel


RealLiveMoms: Share your experience with Real Live Moms just like you. ------------------------------------------
You are currently subscribed to the basinsinfo listserver.

To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov
OR:
Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your
subscription.
OR
Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov
------------------------------------------
----------------------------------------------------------- X-Message-Number: 34 X-lyris-Id: 153613 Date: Fri, 30 Mar 2007 11:03:17 -0600 From: "Jennifer Morgan" Subject: modeling water diversions ------=_Part_52665_32785572.1175274197822 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline I know how to include discharges TO the river in BASINS, but I'm not sure how to account for diversions of water OUT of the river. Anyone have any suggestions? Thank you, Jennifer Morgan ------=_Part_52665_32785572.1175274197822 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline I know how to include discharges TO the river in BASINS, but I'm not sure how to account for diversions of water OUT of the river.  Anyone have any suggestions?

Thank you,
Jennifer Morgan

------=_Part_52665_32785572.1175274197822-- ----------------------------------------------------------- X-Message-Number: 35 X-lyris-Id: 153619 Date: Fri, 30 Mar 2007 13:04:01 -0500 From: "Sillah Kargbo" Subject: Re:HYDR-PARM1 BLOCK Hi Harshad, Assigning 0 or 1 will only control printout but the simulated flow. I have = printed out hydraulic parameters when I needed them and I have assinged 0 = when I did not but either 0 nor 1 has changed my flow values. Regards, G.A. Sillah Kargbo, PhD, P.Eng. Water Resources Engineer, Source Protection Planning c/o Lake Simcoe Region Conservation Authority 120 Bayview Parway Newmarket, Ontario L3Y 3W3 Tel: (905) 895-1281 ext 309 Fax: (905) 853-5881 E-mail: s.kargbo@lsrca.on.ca >>> harshadsaroj@hotmail.com 29/03/2007 11:03 am >>> Hello Friends, According to HSPF user manual, if A value of 1 for AUX1FG, AUX2FG and = AUX3FG means subroutine AUXIL will be called to compute depth, stage, = surface area, average depth, and topwidth, and values for these = parameters will be reported in the printout. A value of 0 = supresses the calculation and printout of this information. So if these = value 0 either 1 can make effect in simulated flow results or those flag = only for printout purpose only. Does anyone have idea? please let me know. Thanks. -Harshad Patel=20 RealLiveMoms: Share your experience with Real Live Moms just like you. = ------------------------------------------=20 You are currently subscribed to the basinsinfo listserver.=20 To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.go= v=20 OR:=20 Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.p= l to manage your=20 subscription.=20 OR=20 Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov= =20 ------------------------------------------=20 ----------------------------------------------------------- X-Message-Number: 36 X-lyris-Id: 153624 Date: Fri, 30 Mar 2007 18:50:52 +0000 From: "harshad patel" Subject: Re: Water balance Script

Hi Everyone,

I am trying to generate water balance report through GenScn. I follow the same step as given in BASINS/HSPF exercise # 5. According this exercise after selecting waterbalance script and providing current scenario  and Input directory  a "Variable" window pop up and it should closed also. But in my case "varibale" window does not close and another window  pop up called"........WaterBalnace.txt"  without any data and it stop this stage. Looks to me script run is not complete. Why? no idea. can anyone have used in past experined this.

Here is the script run progress under"Variable" window.

*********************************************************

DATASELECTED(1) = <Unknown>
PLUGINMANAGER(Object)
ARG1NAME = CurScenario
ARG1DEFAULT = Base
ARG2NAME = InputDir
ARG2DEFAULT = C:\BASINS\Modelout\
INPUTDIR = C:\BASINS\modelout\prop_11\
STANDARDSDIR = C:\BASINS\models\HSPF\bin\Scripts\
OUTPUTDIR = C:\BASINS\modelout\prop_11\Output\
REPORTNAME = prop_11.WaterBalance
TSERFILEBIN(FileObject:Name:prop_11.hbn Type:HSPFBinary Unit:0)
CURRENTUCIFILEOBJECT(FileObject:Name:prop_11.uci)
GHSPFRUNINFO = UCI Created by WinHSPF for prop_11
ARG1(FileObject:Name:prop_11.hbn Type:HSPFBinary Unit:0)
ARG2 = prop_11
ARGCOUNT = 2
DATAFILEOBJECT(FileObject:Name:prop_11.hbn Type:HSPFBinary Unit:0)
CURSCENARIO = prop_11
DATEFORMAT =  yyyy   
ARGEVALUATING = 5
SHOWTOTAL = 0
DOROW = (ATCScript "Water Balance Row"
  (' nVal, CurScenario, CurLocation, CurConstituent, row, showTotal are set by main script)
  (If (= CurScenario "CurScenario")
      (Warn "Water Balance Row script is a subroutine for WaterBalance.
             It cannot be run alone." "Water Balance Row")
      (Else
        (Set curData (DataFile DataFileObject Data Scenario CurScenario
            ;             & nbsp;            &nb sp;        Location CurLocation
            ;             & nbsp;            &nb sp;        Constituent CurConstituent))
        (Set Total 0)
        (Set col 1)
        (For d = 1 to nVal
           (Set val (DataTser curData Value d))
           (Set Total (+ Total val))
           (Grid (Increment col) row (Format (Signif val 4) "####0.0##"))
        )
        (Grid (Increment col) row (Format (Signif (/ Total nVal) 4) "####0.0##"))
        (If (> showTotal 0)
          (Grid (Increment col) row (Format (Signif Total 4) "####0.0##"))
        )
      )
  )
)

GROUPCOUNTER = 2
CRLF =

PAGEBREAK =
REPORTSTRING =
SAMPLEDATA =
CURDATES = 0
NVAL = 1

*******************************************************************

 

Thanks in advance for any suggestion.



-Harshad Patel


Fine Dining & Fancy Food. Check Out This Collection Of ----------------------------------------------------------- X-Message-Number: 37 X-lyris-Id: 153633 Date: Fri, 30 Mar 2007 13:50:21 -0700 From: franczyk@pdx.edu Subject: Land Use in Basins Hello, I am new at using BASINS and am working on a project where I would like to introduce different land use rasters into the model in order to assess their impact on river runoff. These rasters are ones that I have created myself or have added on to existing ones. The computer that I have available uses Windows XP and ArcView 3.3 or ArcGIS 9.2., which would mean that I can use BASINS 3.1. However, the information on BASINS 3.1 indicates that all data is taken off of the web. Is is possible to introduce your own land use datasets (or any other datasets) into this version or is it strictly limited to datasets from websites? The information for BASINS 3.0 indicates that one can introduce datasets without going to the web, but this version will not run on the computer that I have available, according to its software requirements. I would appreciate any advice as to whether I can use BASINS 3.1 for my purposes. Thank you for your help, Jon Franczyk ----------------------------------------------------------- X-Message-Number: 38 X-lyris-Id: 153634 Date: Fri, 30 Mar 2007 16:33:56 -0500 From: "Debabrata Sahoo" Subject: Land use Land cover data set Hello! Folks, Just need a quick info! What is the year for land use/land cover data sets present in BASINS 3.1? Where do I get the info? Thanks, Deb ----- Original Message ----- From: "Sillah Kargbo" To: "Private list for BASINS users" Sent: Friday, March 30, 2007 1:04 PM Subject: Re:[basinsinfo] HYDR-PARM1 BLOCK Hi Harshad, Assigning 0 or 1 will only control printout but the simulated flow. I have printed out hydraulic parameters when I needed them and I have assinged 0 when I did not but either 0 nor 1 has changed my flow values. Regards, G.A. Sillah Kargbo, PhD, P.Eng. Water Resources Engineer, Source Protection Planning c/o Lake Simcoe Region Conservation Authority 120 Bayview Parway Newmarket, Ontario L3Y 3W3 Tel: (905) 895-1281 ext 309 Fax: (905) 853-5881 E-mail: s.kargbo@lsrca.on.ca >>> harshadsaroj@hotmail.com 29/03/2007 11:03 am >>> Hello Friends, According to HSPF user manual, if A value of 1 for AUX1FG, AUX2FG and AUX3FG means subroutine AUXIL will be called to compute depth, stage, surface area, average depth, and topwidth, and values for these parameters will be reported in the printout. A value of 0 supresses the calculation and printout of this information. So if these value 0 either 1 can make effect in simulated flow results or those flag only for printout purpose only. Does anyone have idea? please let me know. Thanks. -Harshad Patel RealLiveMoms: Share your experience with Real Live Moms just like you. ------------------------------------------ You are currently subscribed to the basinsinfo listserver. To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov OR: Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your subscription. OR Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov ------------------------------------------ ------------------------------------------ You are currently subscribed to the basinsinfo listserver. To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov OR: Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your subscription. OR Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov ------------------------------------------ ----------------------------------------------------------- X-Message-Number: 39 X-lyris-Id: 153637 Date: Fri, 30 Mar 2007 15:51:57 -0600 From: "Serele, Charles" Subject: RE: Read ArcGIS data in BASINS This is a multi-part message in MIME format. ------_=_NextPart_001_01C77315.A32FBF16 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hello Dan, =20 Thank you for your reply. I tried everything but nothing work. I guest my problem is also that I got little experience with ArcGIS. When, I saved my DEM in tiff, BASINS read it but refuse to process it and I loose the projection. Will appreacite help ! =20 Thanks =20 Charles -----Original Message----- From: Daniel Ames [mailto:dpames@gmail.com]=20 Sent: 29 mars 2007 14:52 To: Private list for BASINS users Subject: Fwd: [basinsinfo] Read ArcGIS data in BASINS =09 =09 =09 Charles, =09 Because ESRI Geodatabases are in a proprietary ESRI-only format, you will need to export them to a standard format before using them in BASINS. I recommend exporting your raster (DEM) data as GeoTIFF or ASCII-raster, and exporting your vector data as shapefiles. Then your data will be in a non-proprietary open format and can be read by any GIS related software including BASINS.=20 =09 Dan=20 =09 =09 =09 On 3/29/07, Serele, Charles < serelec@agr.gc.ca > wrote:=20 Hi All, =20 I am a new user of BASINS and I need help for automatic watershed delineation. My ArcGIS data are in a geodatabase and I would like to import these data into BASINS to work on it. How can I do that ? Can anyone help me. =20 Thanks in advance, =20 Charles ------------------------------------------=20 You are currently subscribed to the basinsinfo listserver.=20 =09 To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov=20 OR:=20 Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your=20 subscription.=20 OR=20 Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov=20 ------------------------------------------=20 ------------------------------------------ You are currently subscribed to the basinsinfo listserver. To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov OR: Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your subscription. OR Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov ------------------------------------------ ------_=_NextPart_001_01C77315.A32FBF16 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Message
Hello=20 Dan,
 
Thank you for=20 your reply. I tried everything but nothing work. I guest my problem is = also that=20 I got little experience with ArcGIS.
When, I saved=20 my DEM in tiff, BASINS read it but refuse to process it and I loose the=20 projection.
Will=20 appreacite help !
 
Thanks
 
Charles
-----Original Message-----
From: = Daniel Ames=20 [mailto:dpames@gmail.com]
Sent: 29 mars 2007 = 14:52
To:=20 Private list for BASINS users
Subject: Fwd: [basinsinfo] = Read ArcGIS=20 data in BASINS


Charles,

Because ESRI = Geodatabases are in=20 a proprietary ESRI-only format, you will need to export them to a = standard=20 format before using them in BASINS.  I recommend exporting your = raster=20 (DEM) data as GeoTIFF or ASCII-raster, and exporting your vector data = as=20 shapefiles. Then your data will be in a non-proprietary open format = and can be=20 read by any GIS related software including BASINS.

Dan


On 3/29/07, Serele,=20 Charles < = serelec@agr.gc.ca>=20 wrote:
Hi = All,
 
I am a new user of BASINS = and I need=20 help for automatic watershed delineation. My ArcGIS data are in a=20 geodatabase and I would like to import these data into BASINS = to work=20 on it. How can I do that ? Can anyone help me.
 
Thanks in = advance,
 
Charles
-------------------------------------= -----=20
You are currently subscribed to the basinsinfo listserver. =

To=20 unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov=20
OR:
Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage = your=20
subscription.
OR
Contact the basinsinfo listserver owner = at basinsinfo-Owner@lists.epa.gov=20
------------------------------------------=20 =

-------------------------------= -----------=20 You are currently subscribed to the basinsinfo listserver. To = unsubscribe,=20 send the words unsubscribe basinsinfo to lyris@lists.epa.gov OR: Use = the=20 listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl = to manage=20 your subscription. OR Contact the basinsinfo listserver owner at=20 basinsinfo-Owner@lists.epa.gov=20 ------------------------------------------ ------_=_NextPart_001_01C77315.A32FBF16-- ----------------------------------------------------------- X-Message-Number: 40 X-lyris-Id: 153638 Date: Fri, 30 Mar 2007 16:31:43 -0600 From: "Daniel Ames" Subject: Re: Read ArcGIS data in BASINS ------=_Part_87522_6919123.1175293903236 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline I suggest using ArcCatalog to export your data as ASCII (save it with the .asc extension) then load into BASINS. - Dan On 3/30/07, Serele, Charles wrote: > > Hello Dan, > > Thank you for your reply. I tried everything but nothing work. I guest my > problem is also that I got little experience with ArcGIS. > When, I saved my DEM in tiff, BASINS read it but refuse to process it and > I loose the projection. > Will appreacite help ! > > Thanks > > Charles > > -----Original Message----- > *From:* Daniel Ames [mailto:dpames@gmail.com] > *Sent:* 29 mars 2007 14:52 > *To:* Private list for BASINS users > *Subject:* Fwd: [basinsinfo] Read ArcGIS data in BASINS > > > Charles, > > Because ESRI Geodatabases are in a proprietary ESRI-only format, you will > need to export them to a standard format before using them in BASINS. I > recommend exporting your raster (DEM) data as GeoTIFF or ASCII-raster, and > exporting your vector data as shapefiles. Then your data will be in a > non-proprietary open format and can be read by any GIS related software > including BASINS. > > Dan > > On 3/29/07, Serele, Charles < serelec@agr.gc.ca> wrote: > > > > Hi All, > > > > I am a new user of BASINS and I need help for automatic watershed > > delineation. My ArcGIS data are in a geodatabase and I would like to import > > these data into BASINS to work on it. How can I do that ? Can anyone help > > me. > > > > Thanks in advance, > > > > Charles > > ------------------------------------------ > > You are currently subscribed to the basinsinfo listserver. > > > > To unsubscribe, send the words unsubscribe basinsinfo to > > lyris@lists.epa.gov > > OR: > > Use the listserver's web interface at > > https://lists.epa.gov/cgi-bin/lyris.pl to manage your > > subscription. > > OR > > Contact the basinsinfo listserver owner at > > basinsinfo-Owner@lists.epa.gov > > ------------------------------------------ > > > > ------------------------------------------ You are currently subscribed to > the basinsinfo listserver. To unsubscribe, send the words unsubscribe > basinsinfo to lyris@lists.epa.gov OR: Use the listserver's web interface > at https://lists.epa.gov/cgi-bin/lyris.pl to manage your subscription. OR > Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov------------------------------------------ > > ------------------------------------------ > You are currently subscribed to the basinsinfo listserver. > > To unsubscribe, send the words unsubscribe basinsinfo to > lyris@lists.epa.gov > OR: > Use the listserver's web interface at > https://lists.epa.gov/cgi-bin/lyris.pl to manage your > subscription. > OR > Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov > ------------------------------------------ > ------=_Part_87522_6919123.1175293903236 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline I suggest using ArcCatalog to export your data as ASCII (save it with the .asc extension) then load into BASINS. - Dan

On 3/30/07, Serele, Charles < serelec@agr.gc.ca> wrote:
Hello Dan,
 
Thank you for your reply. I tried everything but nothing work. I guest my problem is also that I got little experience with ArcGIS.
When, I saved my DEM in tiff, BASINS read it but refuse to process it and I loose the projection.
Will appreacite help !
 
Thanks
 
Charles
-----Original Message-----
From: Daniel Ames [mailto:dpames@gmail.com]
Sent: 29 mars 2007 14:52
To: Private list for BASINS users
Subject: Fwd: [basinsinfo] Read ArcGIS data in BASINS


Charles,

Because ESRI Geodatabases are in a proprietary ESRI-only format, you will need to export them to a standard format before using them in BASINS.  I recommend exporting your raster (DEM) data as GeoTIFF or ASCII-raster, and exporting your vector data as shapefiles. Then your data will be in a non-proprietary open format and can be read by any GIS related software including BASINS.

Dan


On 3/29/07, Serele, Charles < serelec@agr.gc.ca> wrote:
Hi All,
 
I am a new user of BASINS and I need help for automatic watershed delineation. My ArcGIS data are in a geodatabase and I would like to import these data into BASINS to work on it. How can I do that ? Can anyone help me.
 
Thanks in advance,
 
Charles
------------------------------------------
You are currently subscribed to the basinsinfo listserver.

To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov
OR:
Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your
subscription.
OR
Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov
------------------------------------------

-------------------------------------- ---- You are currently subscribed to the basinsinfo listserver. To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov OR: Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your subscription. OR Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov ------------------------------------------
------------------------------------------
You are currently subscribed to the basinsinfo listserver.

To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.gov
OR:
Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.pl to manage your
subscription.
OR
Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov
------------------------------------------

------=_Part_87522_6919123.1175293903236-- ----------------------------------------------------------- X-Message-Number: 41 X-lyris-Id: 153647 Date: Sat, 31 Mar 2007 15:02:18 -0400 From: "Sillah Kargbo" Subject: Re: Land Use in Basins Hi Franczyk, You can use your own GIS layers by importing them to your model with ADD = THEME botton in the BASINS View window. Regards, G.A. Sillah Kargbo, PhD, P.Eng. Water Resources Engineer, Source Protection Planning c/o Lake Simcoe Region Conservation Authority 120 Bayview Parway Newmarket, Ontario L3Y 3W3 Tel: (905) 895-1281 ext 309 Fax: (905) 853-5881 E-mail: s.kargbo@lsrca.on.ca >>> franczyk@pdx.edu 30/03/2007 4:50 pm >>> Hello, I am new at using BASINS and am working on a project where I =20 would like to introduce different land use rasters into the model in =20 order to assess their impact on river runoff. These rasters are ones =20 that I have created myself or have added on to existing ones. The =20 computer that I have available uses Windows XP and ArcView 3.3 or =20 ArcGIS 9.2., which would mean that I can use BASINS 3.1. However, the =20 information on BASINS 3.1 indicates that all data is taken off of the =20 web. Is is possible to introduce your own land use datasets (or any =20 other datasets) into this version or is it strictly limited to =20 datasets from websites? The information for BASINS 3.0 indicates that =20 one can introduce datasets without going to the web, but this version =20 will not run on the computer that I have available, according to its =20 software requirements. I would appreciate any advice as to whether I =20 can use BASINS 3.1 for my purposes. Thank you for your help, Jon =20 Franczyk ------------------------------------------ You are currently subscribed to the basinsinfo listserver.=20 To unsubscribe, send the words unsubscribe basinsinfo to lyris@lists.epa.go= v=20 OR: Use the listserver's web interface at https://lists.epa.gov/cgi-bin/lyris.p= l to manage your=20 subscription. OR Contact the basinsinfo listserver owner at basinsinfo-Owner@lists.epa.gov= =20 ------------------------------------------ ----------------------------------------------------------- X-Message-Number: 42 X-lyris-Id: 153650 Date: Sat, 31 Mar 2007 14:52:29 -0600 From: "Serele, Charles" Subject: Manual Delineation This is a multi-part message in MIME format. ------_=_NextPart_001_01C773D6.7F0528DC Content-Type: multipart/alternative; boundary="----_=_NextPart_002_01C773D6.7F0528DC" ------_=_NextPart_002_01C773D6.7F0528DC Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi All, =20 I'm delineating a watershed using the Manual delineation options. However, after delineating the subbasin and calculating subbasin parameters, I got the following error message when I launched the Define Stream Network and Outlets function: Cannot find field Level in the streams layer... =20 Does anyone know what causes this error ^ =20 Thanks in advance =20 Charles ------_=_NextPart_002_01C773D6.7F0528DC Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Message
Hi=20 All,
 
I'm = delineating a=20 watershed using the Manual delineation options. However, after = delineating the=20 subbasin and calculating subbasin parameters, I got the following error = message=20 when I launched the Define Stream Network and Outlets function: = Cannot=20 find field Level in the streams layer...
 
Does anyone know=20 what causes this error ^
 
Thanks in=20 advance
 
Charles
------_=_NextPart_002_01C773D6.7F0528DC-- ------_=_NextPart_001_01C773D6.7F0528DC Content-Type: image/jpeg; name="Glacier Bkgrd.jpg" Content-Transfer-Encoding: base64 Content-ID: <692254920@31032007-19EB> Content-Description: Glacier Bkgrd.jpg Content-Location: Glacier%20Bkgrd.jpg /9j/4AAQSkZJRgABAgEASABIAAD/7QSqUGhvdG9zaG9wIDMuMAA4QklNA+kAAAAAAHgAAwAAAEgA SAAAAAAC2gIo/+H/4QL5AkUDRwUoA/wAAgAAAEgASAAAAAAC2AIoAAEAAABkAAAAAQADAwMAAAAB Jw8AAQABAAAAAAAAAAAAAAAAYAgAGQGQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA4 QklNA+0AAAAAABAASAAAAAEAAQBIAAAAAQABOEJJTQPzAAAAAAAIAAAAAAAAAAA4QklNBAoAAAAA AAEAADhCSU0nEAAAAAAACgABAAAAAAAAAAI4QklNA/UAAAAAAEgAL2ZmAAEAbGZmAAYAAAAAAAEA L2ZmAAEAoZmaAAYAAAAAAAEAMgAAAAEAWgAAAAYAAAAAAAEANQAAAAEALQAAAAYAAAAAAAE4QklN A/gAAAAAAHAAAP////////////////////////////8D6AAAAAD///////////////////////// ////A+gAAAAA/////////////////////////////wPoAAAAAP////////////////////////// //8D6AAAOEJJTQQAAAAAAAACAAA4QklNBAIAAAAAAAIAADhCSU0ECAAAAAAAEAAAAAEAAAJAAAAC QAAAAAA4QklNBAkAAAAAApkAAAABAAAAgAAAAAEAAAGAAAABgAAAAn0AGAAB/9j/4AAQSkZJRgAB AgEASABIAAD//gAnRmlsZSB3cml0dGVuIGJ5IEFkb2JlIFBob3Rvc2hvcKggNC4wAP/uAA5BZG9i ZQBkgAAAAAH/2wCEAAwICAgJCAwJCQwRCwoLERUPDAwPFRgTExUTExgRDAwMDAwMEQwMDAwMDAwM DAwMDAwMDAwMDAwMDAwMDAwMDAwBDQsLDQ4NEA4OEBQODg4UFA4ODg4UEQwMDAwMEREMDAwMDAwR DAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDP/AABEIAAEAgAMBIgACEQEDEQH/3QAEAAj/xAE/ AAABBQEBAQEBAQAAAAAAAAADAAECBAUGBwgJCgsBAAEFAQEBAQEBAAAAAAAAAAEAAgMEBQYHCAkK CxAAAQQBAwIEAgUHBggFAwwzAQACEQMEIRIxBUFRYRMicYEyBhSRobFCIyQVUsFiMzRygtFDByWS U/Dh8WNzNRaisoMmRJNUZEXCo3Q2F9JV4mXys4TD03Xj80YnlKSFtJXE1OT0pbXF1eX1VmZ2hpam tsbW5vY3R1dnd4eXp7fH1+f3EQACAgECBAQDBAUGBwcGBTUBAAIRAyExEgRBUWFxIhMFMoGRFKGx QiPBUtHwMyRi4XKCkkNTFWNzNPElBhaisoMHJjXC0kSTVKMXZEVVNnRl4vKzhMPTdePzRpSkhbSV xNTk9KW1xdXl9VZmdoaWprbG1ub2JzdHV2d3h5ent8f/2gAMAwEAAhEDEQA/APTqPon4/wAAir5X SQGyn6oSXyukip+qEl8rpJKfqhJfK6SSn6oSXyukkp+qEl8rpJKfqhJfK6SSn6oSXyukkp//2QA4 QklNBAYAAAAAAAcABAAAAAEBAP/+ACdGaWxlIHdyaXR0ZW4gYnkgQWRvYmUgUGhvdG9zaG9wqCA0 LjAA/+4ADkFkb2JlAGQAAAAAAf/bAIQABgQEBwUHCwYGCw4KCAoOEQ4ODg4RFhMTExMTFhEMDAwM DAwRDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAEHCQkTDBMiExMiFA4ODhQUDg4ODhQRDAwM DAwREQwMDAwMDBEMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwM/8AAEQgAAwZAAwERAAIRAQMR Af/dAAQAyP/EAaIAAAAHAQEBAQEAAAAAAAAAAAQFAwIGAQAHCAkKCwEAAgIDAQEBAQEAAAAAAAAA AQACAwQFBgcICQoLEAACAQMDAgQCBgcDBAIGAnMBAgMRBAAFIRIxQVEGE2EicYEUMpGhBxWxQiPB UtHhMxZi8CRygvElQzRTkqKyY3PCNUQnk6OzNhdUZHTD0uIIJoMJChgZhJRFRqS0VtNVKBry4/PE 1OT0ZXWFlaW1xdXl9WZ2hpamtsbW5vY3R1dnd4eXp7fH1+f3OEhYaHiImKi4yNjo+Ck5SVlpeYmZ qbnJ2en5KjpKWmp6ipqqusra6voRAAICAQIDBQUEBQYECAMDbQEAAhEDBCESMUEFURNhIgZxgZEy obHwFMHR4SNCFVJicvEzJDRDghaSUyWiY7LCB3PSNeJEgxdUkwgJChgZJjZFGidkdFU38qOzwygp 0+PzhJSktMTU5PRldYWVpbXF1eX1RlZmdoaWprbG1ub2R1dnd4eXp7fH1+f3OEhYaHiImKi4yNjo +DlJWWl5iZmpucnZ6fkqOkpaanqKmqq6ytrq+v/aAAwDAQACEQMRAD8A9N/vv+Lv+SWFhv5/7F37 7/i7/kliu/n/ALFbJ63H/dv0+lTFd/P/AGKj++/y/wDkliu/n/sVa29Tl8fSn7fCn/JPfFIRH/AY GTv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Bi rv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/w GKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3 /AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd /wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFX f8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gM Vd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+ AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8A gMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/ 4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq 7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wAB irv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Bi rv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/w GKu/4DFXf8Birv8AgMVd/wABirv+AxV3/AYq7/gMVd/wGKu/4DFXf8Birv8AgMVd/wABirv+AxV3 /AYq/wD/2Q== ------_=_NextPart_001_01C773D6.7F0528DC-- --- END OF MESSAGES ----------------------------------------------------------