The following information is also available:
Time column is TIME ORDERED-> Fetching fa970325_1338.0040.Z
ATTITUDE_V0.9j reading attitude file:./merged.tmp open asc output file:out.tmp AVERAGE ASPECT AND OFFSET FOR THIS ATTITUDE FILE: Attitude file start and stop ascatime : 133450743.467000 133490451.348800 Data file start and stop ascatime : 133450743.467000 133490451.348800 Aspecting run start and stop ascatime : 133450743.467098 133490451.348723 Time interval averaged over (seconds) : 39707.881625 Total pointing and manuver time (sec) : 24796.476562 14911.486328 Mean boresight Euler angles : 254.149071 54.858423 8.786121 RA DEC SUN ANGLE Mean solar position (deg) : 3.84 1.66 Mean aberration (arcsec) : 8.02 -16.80 Mean sat X-axis (deg) : 269.179613 -53.914259 94.09 Mean sat Y-axis (deg) : 349.232982 7.175310 15.57 Mean sat Z-axis (deg) : 254.149071 35.141576 104.99 RA DEC ROLL OFFSET (deg) (deg) (deg) (arcmin) Average 254.428894 35.310555 278.622131 0.379584 Minimum 254.320648 35.306988 278.487213 0.020868 Maximum 254.437057 35.763451 278.830322 27.331238 Sigma (RMS) 0.003289 0.001159 0.027796 0.822635 Number of ASPECT records processed = 25844 Aspecting to RA/DEC : 254.42889404 35.31055450 closing output file... closing attitude file...-> Standard Output From STOOL checkatt:
Opening file: ./out.tmp ***************** Observation Info ****************** RA (J2000 deg): 254.429 DEC: 35.311 START TIME: SC 133450743.4671 = UT 25/03/97 13:39:03 ****** Definition of Attitude SENSOR Bit Flags ****** Sensors used in the attitude determination and attitude control mode 1: USED, 0: NOT USED B0:STT-A, B1:STT-B, B2:NSAS, B3:GAS, B4:SSAS-SA, B5:SSAS-SB, B6:IRU-X, B7:IRU-Y, B8:IRU-Z, B9:IRU-S1, B10:IRU-S2, B11: Attitude control mode 1: coarse, 0: fine B12: Sun presence 1: day, 0: night B13: STT-A earth occultation 1: earth occultation, 0: no occultation B14: STT-B earth occultation 1: earth occultation, 0: no occultation B16,17,18: STT-A track stars no.1,2,3, 1: USED, 0: NOT USED B19,20,21: STT-B track stars no.1,2,3, 1: USED, 0: NOT USED B22,23: always 0 ******** Attitude File Reconstruction Summary ******* S S N G S S I I I I I A S S S S S T T S A S S R R R R R C U T T T T T T A S A A U U U U U M N T T T T - - S . A A - - - - - . . - - - - A B . . - - X Y Z S S . . A B A B . . . . S S . . . 1 2 . . O O S S offset_time separation sensor . . . . A B . . . . . . . C C T T (sec) (arcmin) . . . . . . . . . . . . . C C R R BIT: 0 1 2 3 4 5 6 7 8 9 A B C D E 4.000117 5.396 8603 1 1 0 0 0 0 0 0 0 1 1 0 0 0 0 0 0 999.997070 5.416 8A03 1 1 0 0 0 0 0 0 0 1 0 1 0 0 0 0 0 1381.995850 4.408 8803 1 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 1438.495728 3.404 8803 1 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 1501.495605 2.398 8803 1 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 1593.995239 1.394 8803 1 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 1809.994751 0.391 8803 1 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 3127.990723 0.262 8403 1 1 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 6743.979980 0.400 C08A83 1 1 0 0 0 0 0 1 0 1 0 1 0 0 0 0 0 8859.973633 0.326 8403 1 1 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 12503.962891 0.366 C08A83 1 1 0 0 0 0 0 1 0 1 0 1 0 0 0 0 0 14615.956055 0.293 8403 1 1 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 18263.945312 0.287 C08A83 1 1 0 0 0 0 0 1 0 1 0 1 0 0 0 0 0 20359.939453 0.254 8403 1 1 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 24471.927734 0.186 D888C3 1 1 0 0 0 0 1 1 0 0 0 1 0 0 0 0 3 26391.921875 0.230 188443 1 1 0 0 0 0 1 0 0 0 1 0 0 0 0 0 3 29719.912109 0.184 C08A83 1 1 0 0 0 0 0 1 0 1 0 1 0 0 0 0 0 31847.904297 0.183 8403 1 1 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 35479.894531 0.140 C08A83 1 1 0 0 0 0 0 1 0 1 0 1 0 0 0 0 0 37591.886719 0.179 8403 1 1 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 39707.882812 27.331 9603 1 1 0 0 0 0 0 0 0 1 1 0 1 0 0 0 0 Attitude Records: 25844 Attitude Steps: 21 Maneuver ACM time: 14911.5 sec Pointed ACM time: 24796.5 sec-> Calculating aspect point
100 98 count=416 sum1=105682 sum2=22809.5 sum3=3726.88 100 99 count=47 sum1=11940 sum2=2577.33 sum3=421.852 100 100 count=2 sum1=508.084 sum2=109.686 sum3=17.971 101 98 count=19 sum1=4827.03 sum2=1041.83 sum3=169.768 101 99 count=41 sum1=10416.4 sum2=2248.21 sum3=365.983 102 99 count=57 sum1=14481.8 sum2=3125.68 sum3=507.878 103 99 count=63 sum1=16006.9 sum2=3454.88 sum3=560.124 104 56 count=1 sum1=254.087 sum2=54.405 sum3=8.652 104 99 count=33 sum1=8384.82 sum2=1809.77 sum3=292.915 104 100 count=21 sum1=5335.89 sum2=1151.7 sum3=186.247 105 100 count=68 sum1=17278.6 sum2=3729.45 sum3=602.321 106 100 count=91 sum1=23123.8 sum2=4991.15 sum3=804.507 107 100 count=98 sum1=24903.5 sum2=5375.35 sum3=864.872 108 100 count=91 sum1=23125.4 sum2=4991.58 sum3=802.041 108 101 count=65 sum1=16518.4 sum2=3565.51 sum3=572.409 109 101 count=349 sum1=88694.2 sum2=19144.8 sum3=3069.51 110 101 count=9005 sum1=2.28863e+06 sum2=494006 sum3=79061.1 111 101 count=15376 sum1=3.90787e+06 sum2=843524 sum3=134957 0 out of 25843 points outside bin structure-> Euler angles: 254.153, 54.8595, 8.77808
Interpolating 48 records in time interval 1.3349e+08 - 1.3349e+08
frf_directory,s,h,"./",,,"frf directory" frf_file,s,h,"ft970325_1338.0040",,,"frf telemetry file"-> Standard Output From FTOOL frfread:
Frfread version 3.00 patch 32 ASCA format Telemetry file: ft970325_1338.0040 Initial mode = 2 (Bright) Initial value for dummy = 0 Initial datamode = 0 (Observation) Initial sis = 0 Initial bit_rate = 2 Reading all superframes reading PH mode reading PCAL mode reading MPCmode No mode = 0 Faint = 0 Bright = 414016 Fast = 0 Frame = 0 Dark frame = 0 Histogram = 0 Integration = 0 PH = 414016 MPC = 0 PCAL = 0 Memory Check = 0 Number of superframes = 6547 no. of SIS events found = 923455-> Standard Error Output From FTOOL frfread
coordinate error 48 0 coordinate error 0 384 coordinate error 0 48 coordinate error 1 256 coordinate error 0 1 coordinate error 96 0 coordinate error 0 3 coordinate error 24 0 coordinate error 12 0 coordinate error 6 0 coordinate error 0 0 coordinate error 0 96 coordinate error 6 0 coordinate error 0 12 coordinate error 1 256 coordinate error 256 0 coordinate error 0 384 coordinate error 24 0 coordinate error 0 0 coordinate error 12 0 coordinate error 0 0 coordinate error 0 0 coordinate error 1 256 coordinate error 0 6 coordinate error 0 0 coordinate error 0 0 coordinate error 0 0 coordinate error 0 0 coordinate error 0 0 coordinate error 0 24 coordinate error 192 0 coordinate error 48 0 coordinate error 0 0 coordinate error 0 0 coordinate error 192 0 coordinate error 0 0 coordinate error 0 0 coordinate error 0 0 coordinate error 0 384 coordinate error 0 0 coordinate error 0 0 coordinate error 0 0 coordinate error 0 0 coordinate error 0 96 coordinate error 3 0 coordinate error 0 3 coordinate error 0 0 coordinate error 0 384 coordinate error 0 0 coordinate error 0 0 coordinate error 0 0 coordinate error 0 1 coordinate error 12 0 coordinate error 0 96 coordinate error 256 0 coordinate error 3 0 coordinate error 24 0 coordinate error 0 0 coordinate error 0 0 coordinate error 0 6 coordinate error 0 3 coordinate error 0 96 coordinate error 0 96 coordinate error 0 96 coordinate error 0 0 coordinate error 96 0 coordinate error 0 3 coordinate error 0 0 coordinate error 3 0 coordinate error 0 3 coordinate error 0 0 coordinate error 0 0 coordinate error 0 12 coordinate error 0 0 coordinate error 0 0 coordinate error 0 0 coordinate error 0 0 coordinate error 0 0 coordinate error 12 0 coordinate error 0 0 coordinate error 0 0 coordinate error 0 0 coordinate error 0 0 coordinate error 0 0 coordinate error 12 0 coordinate error 0 1 coordinate error 0 6 coordinate error 0 384 coordinate error 0 0 coordinate error 0 6 coordinate error 0 6 coordinate error 0 0 coordinate error 0 0 coordinate error 0 96 coordinate error 1 256 coordinate error 0 0 coordinate error 0 0 coordinate error 96 0 coordinate error 256 0 coordinate error 1 256 coordinate error 0 12 coordinate error 0 96 coordinate error 0 0 coordinate error 1 256 coordinate error 0 12 coordinate error 256 0-> Removing the following files with NEVENTS=0
ft970325_1338_0040G200570M.fits ft970325_1338_0040G200670L.fits ft970325_1338_0040G201370H.fits ft970325_1338_0040G201970L.fits ft970325_1338_0040G300570M.fits ft970325_1338_0040G300670L.fits ft970325_1338_0040G301370H.fits ft970325_1338_0040G301470H.fits ft970325_1338_0040G302070L.fits ft970325_1338_0040S000402M.fits ft970325_1338_0040S000502L.fits ft970325_1338_0040S001402L.fits ft970325_1338_0040S100402M.fits ft970325_1338_0040S100502L.fits ft970325_1338_0040S101402L.fits-> Checking for empty GTI extensions
ft970325_1338_0040S000102M.fits[3] ft970325_1338_0040S000202H.fits[3] ft970325_1338_0040S000302M.fits[3] ft970325_1338_0040S000602L.fits[3] ft970325_1338_0040S000702H.fits[3] ft970325_1338_0040S000802L.fits[3] ft970325_1338_0040S000902L.fits[3] ft970325_1338_0040S001002L.fits[3] ft970325_1338_0040S001102H.fits[3] ft970325_1338_0040S001202M.fits[3] ft970325_1338_0040S001302L.fits[3] ft970325_1338_0040S001502L.fits[3] ft970325_1338_0040S001602L.fits[3] ft970325_1338_0040S001702H.fits[3] ft970325_1338_0040S001802M.fits[3] ft970325_1338_0040S001902L.fits[3] ft970325_1338_0040S002002L.fits[3] ft970325_1338_0040S002102H.fits[3] ft970325_1338_0040S002202H.fits[3] ft970325_1338_0040S002302H.fits[3] ft970325_1338_0040S002402M.fits[3] ft970325_1338_0040S002502M.fits[3] ft970325_1338_0040S002602L.fits[3] ft970325_1338_0040S002702L.fits[3] ft970325_1338_0040S002802H.fits[3] ft970325_1338_0040S002902M.fits[3] ft970325_1338_0040S003002L.fits[3] ft970325_1338_0040S003102L.fits[3] ft970325_1338_0040S003202M.fits[3] ft970325_1338_0040S003302L.fits[3]-> Merging GTIs from the following files:
ft970325_1338_0040S100102M.fits[3] ft970325_1338_0040S100202H.fits[3] ft970325_1338_0040S100302M.fits[3] ft970325_1338_0040S100602L.fits[3] ft970325_1338_0040S100702H.fits[3] ft970325_1338_0040S100802L.fits[3] ft970325_1338_0040S100902L.fits[3] ft970325_1338_0040S101002L.fits[3] ft970325_1338_0040S101102H.fits[3] ft970325_1338_0040S101202M.fits[3] ft970325_1338_0040S101302L.fits[3] ft970325_1338_0040S101502L.fits[3] ft970325_1338_0040S101602L.fits[3] ft970325_1338_0040S101702H.fits[3] ft970325_1338_0040S101802M.fits[3] ft970325_1338_0040S101902L.fits[3] ft970325_1338_0040S102002L.fits[3] ft970325_1338_0040S102102H.fits[3] ft970325_1338_0040S102202H.fits[3] ft970325_1338_0040S102302H.fits[3] ft970325_1338_0040S102402M.fits[3] ft970325_1338_0040S102502M.fits[3] ft970325_1338_0040S102602L.fits[3] ft970325_1338_0040S102702L.fits[3] ft970325_1338_0040S102802H.fits[3] ft970325_1338_0040S102902M.fits[3] ft970325_1338_0040S103002L.fits[3] ft970325_1338_0040S103102L.fits[3] ft970325_1338_0040S103202M.fits[3] ft970325_1338_0040S103302L.fits[3]-> Merging GTIs from the following files:
ft970325_1338_0040G200170M.fits[3] ft970325_1338_0040G200270H.fits[3] ft970325_1338_0040G200370M.fits[3] ft970325_1338_0040G200470M.fits[3] ft970325_1338_0040G200770L.fits[3] ft970325_1338_0040G200870L.fits[3] ft970325_1338_0040G200970H.fits[3] ft970325_1338_0040G201070H.fits[3] ft970325_1338_0040G201170H.fits[3] ft970325_1338_0040G201270H.fits[3] ft970325_1338_0040G201470L.fits[3] ft970325_1338_0040G201570L.fits[3] ft970325_1338_0040G201670H.fits[3] ft970325_1338_0040G201770M.fits[3] ft970325_1338_0040G201870L.fits[3] ft970325_1338_0040G202070L.fits[3] ft970325_1338_0040G202170L.fits[3] ft970325_1338_0040G202270H.fits[3] ft970325_1338_0040G202370M.fits[3] ft970325_1338_0040G202470L.fits[3] ft970325_1338_0040G202570L.fits[3] ft970325_1338_0040G202670H.fits[3] ft970325_1338_0040G202770H.fits[3] ft970325_1338_0040G202870H.fits[3] ft970325_1338_0040G202970H.fits[3] ft970325_1338_0040G203070H.fits[3] ft970325_1338_0040G203170H.fits[3] ft970325_1338_0040G203270H.fits[3] ft970325_1338_0040G203370H.fits[3] ft970325_1338_0040G203470H.fits[3] ft970325_1338_0040G203570H.fits[3] ft970325_1338_0040G203670H.fits[3] ft970325_1338_0040G203770H.fits[3] ft970325_1338_0040G203870H.fits[3] ft970325_1338_0040G203970H.fits[3] ft970325_1338_0040G204070H.fits[3] ft970325_1338_0040G204170M.fits[3] ft970325_1338_0040G204270L.fits[3] ft970325_1338_0040G204370L.fits[3] ft970325_1338_0040G204470H.fits[3] ft970325_1338_0040G204570M.fits[3] ft970325_1338_0040G204670L.fits[3] ft970325_1338_0040G204770L.fits[3] ft970325_1338_0040G204870M.fits[3] ft970325_1338_0040G204970M.fits[3] ft970325_1338_0040G205070M.fits[3] ft970325_1338_0040G205170M.fits[3] ft970325_1338_0040G205270L.fits[3] ft970325_1338_0040G205370L.fits[3]-> Merging GTIs from the following files:
ft970325_1338_0040G300170M.fits[3] ft970325_1338_0040G300270H.fits[3] ft970325_1338_0040G300370M.fits[3] ft970325_1338_0040G300470M.fits[3] ft970325_1338_0040G300770L.fits[3] ft970325_1338_0040G300870L.fits[3] ft970325_1338_0040G300970H.fits[3] ft970325_1338_0040G301070H.fits[3] ft970325_1338_0040G301170H.fits[3] ft970325_1338_0040G301270H.fits[3] ft970325_1338_0040G301570L.fits[3] ft970325_1338_0040G301670L.fits[3] ft970325_1338_0040G301770H.fits[3] ft970325_1338_0040G301870M.fits[3] ft970325_1338_0040G301970L.fits[3] ft970325_1338_0040G302170L.fits[3] ft970325_1338_0040G302270L.fits[3] ft970325_1338_0040G302370H.fits[3] ft970325_1338_0040G302470M.fits[3] ft970325_1338_0040G302570L.fits[3] ft970325_1338_0040G302670L.fits[3] ft970325_1338_0040G302770H.fits[3] ft970325_1338_0040G302870H.fits[3] ft970325_1338_0040G302970H.fits[3] ft970325_1338_0040G303070H.fits[3] ft970325_1338_0040G303170H.fits[3] ft970325_1338_0040G303270H.fits[3] ft970325_1338_0040G303370H.fits[3] ft970325_1338_0040G303470H.fits[3] ft970325_1338_0040G303570H.fits[3] ft970325_1338_0040G303670H.fits[3] ft970325_1338_0040G303770M.fits[3] ft970325_1338_0040G303870L.fits[3] ft970325_1338_0040G303970L.fits[3] ft970325_1338_0040G304070H.fits[3] ft970325_1338_0040G304170M.fits[3] ft970325_1338_0040G304270L.fits[3] ft970325_1338_0040G304370L.fits[3] ft970325_1338_0040G304470M.fits[3] ft970325_1338_0040G304570M.fits[3] ft970325_1338_0040G304670M.fits[3] ft970325_1338_0040G304770M.fits[3] ft970325_1338_0040G304870L.fits[3] ft970325_1338_0040G304970L.fits[3]
GISSORTCODE:LO:Start program GISSORTCODE:LO:End program-> Standard Error Output From STOOL gissortsplit:
GISSORTSPLIT:LO:Start program GISSORTSPLIT:LO:g200170h.prelist merge count = 1 photon cnt = 81 GISSORTSPLIT:LO:g200270h.prelist merge count = 1 photon cnt = 141 GISSORTSPLIT:LO:g200370h.prelist merge count = 1 photon cnt = 64 GISSORTSPLIT:LO:g200470h.prelist merge count = 1 photon cnt = 62 GISSORTSPLIT:LO:g200570h.prelist merge count = 10 photon cnt = 372884 GISSORTSPLIT:LO:g200670h.prelist merge count = 2 photon cnt = 133 GISSORTSPLIT:LO:g200770h.prelist merge count = 2 photon cnt = 120 GISSORTSPLIT:LO:g200870h.prelist merge count = 1 photon cnt = 57 GISSORTSPLIT:LO:g200970h.prelist merge count = 1 photon cnt = 71 GISSORTSPLIT:LO:g201070h.prelist merge count = 1 photon cnt = 52 GISSORTSPLIT:LO:g201170h.prelist merge count = 1 photon cnt = 71 GISSORTSPLIT:LO:g201270h.prelist merge count = 1 photon cnt = 55 GISSORTSPLIT:LO:g200170l.prelist merge count = 1 photon cnt = 9 GISSORTSPLIT:LO:g200270l.prelist merge count = 2 photon cnt = 56 GISSORTSPLIT:LO:g200370l.prelist merge count = 8 photon cnt = 8758 GISSORTSPLIT:LO:g200470l.prelist merge count = 4 photon cnt = 1067 GISSORTSPLIT:LO:g200170m.prelist merge count = 1 photon cnt = 25 GISSORTSPLIT:LO:g200270m.prelist merge count = 7 photon cnt = 193211 GISSORTSPLIT:LO:g200370m.prelist merge count = 1 photon cnt = 254 GISSORTSPLIT:LO:g200470m.prelist merge count = 1 photon cnt = 257 GISSORTSPLIT:LO:g200570m.prelist merge count = 1 photon cnt = 256 GISSORTSPLIT:LO:Total filenames split = 49 GISSORTSPLIT:LO:Total split file cnt = 21 GISSORTSPLIT:LO:End program-> Creating ad11502010g200170h.unf
---- cmerge: version 1.5 ---- A total of 10 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040G200270H.fits 2 -- ft970325_1338_0040G201270H.fits 3 -- ft970325_1338_0040G201670H.fits 4 -- ft970325_1338_0040G202270H.fits 5 -- ft970325_1338_0040G202970H.fits 6 -- ft970325_1338_0040G203170H.fits 7 -- ft970325_1338_0040G203370H.fits 8 -- ft970325_1338_0040G203570H.fits 9 -- ft970325_1338_0040G204070H.fits 10 -- ft970325_1338_0040G204470H.fits Merging binary extension #: 2 1 -- ft970325_1338_0040G200270H.fits 2 -- ft970325_1338_0040G201270H.fits 3 -- ft970325_1338_0040G201670H.fits 4 -- ft970325_1338_0040G202270H.fits 5 -- ft970325_1338_0040G202970H.fits 6 -- ft970325_1338_0040G203170H.fits 7 -- ft970325_1338_0040G203370H.fits 8 -- ft970325_1338_0040G203570H.fits 9 -- ft970325_1338_0040G204070H.fits 10 -- ft970325_1338_0040G204470H.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad11502010g200270m.unf
---- cmerge: version 1.5 ---- A total of 7 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040G200170M.fits 2 -- ft970325_1338_0040G200370M.fits 3 -- ft970325_1338_0040G201770M.fits 4 -- ft970325_1338_0040G202370M.fits 5 -- ft970325_1338_0040G204170M.fits 6 -- ft970325_1338_0040G204570M.fits 7 -- ft970325_1338_0040G205170M.fits Merging binary extension #: 2 1 -- ft970325_1338_0040G200170M.fits 2 -- ft970325_1338_0040G200370M.fits 3 -- ft970325_1338_0040G201770M.fits 4 -- ft970325_1338_0040G202370M.fits 5 -- ft970325_1338_0040G204170M.fits 6 -- ft970325_1338_0040G204570M.fits 7 -- ft970325_1338_0040G205170M.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad11502010g200370l.unf
---- cmerge: version 1.5 ---- A total of 8 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040G200870L.fits 2 -- ft970325_1338_0040G201570L.fits 3 -- ft970325_1338_0040G201870L.fits 4 -- ft970325_1338_0040G202170L.fits 5 -- ft970325_1338_0040G202570L.fits 6 -- ft970325_1338_0040G204370L.fits 7 -- ft970325_1338_0040G204770L.fits 8 -- ft970325_1338_0040G205370L.fits Merging binary extension #: 2 1 -- ft970325_1338_0040G200870L.fits 2 -- ft970325_1338_0040G201570L.fits 3 -- ft970325_1338_0040G201870L.fits 4 -- ft970325_1338_0040G202170L.fits 5 -- ft970325_1338_0040G202570L.fits 6 -- ft970325_1338_0040G204370L.fits 7 -- ft970325_1338_0040G204770L.fits 8 -- ft970325_1338_0040G205370L.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad11502010g200470l.unf
---- cmerge: version 1.5 ---- A total of 4 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040G202470L.fits 2 -- ft970325_1338_0040G204270L.fits 3 -- ft970325_1338_0040G204670L.fits 4 -- ft970325_1338_0040G205270L.fits Merging binary extension #: 2 1 -- ft970325_1338_0040G202470L.fits 2 -- ft970325_1338_0040G204270L.fits 3 -- ft970325_1338_0040G204670L.fits 4 -- ft970325_1338_0040G205270L.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Ignoring the following files containing 000000257 events
ft970325_1338_0040G204870M.fits-> Ignoring the following files containing 000000256 events
ft970325_1338_0040G204970M.fits-> Ignoring the following files containing 000000254 events
ft970325_1338_0040G205070M.fits-> Ignoring the following files containing 000000141 events
ft970325_1338_0040G203470H.fits-> Ignoring the following files containing 000000133 events
ft970325_1338_0040G201170H.fits ft970325_1338_0040G202870H.fits-> Ignoring the following files containing 000000120 events
ft970325_1338_0040G203670H.fits ft970325_1338_0040G203970H.fits-> Ignoring the following files containing 000000081 events
ft970325_1338_0040G203870H.fits-> Ignoring the following files containing 000000071 events
ft970325_1338_0040G200970H.fits-> Ignoring the following files containing 000000071 events
ft970325_1338_0040G202670H.fits-> Ignoring the following files containing 000000064 events
ft970325_1338_0040G203270H.fits-> Ignoring the following files containing 000000062 events
ft970325_1338_0040G203070H.fits-> Ignoring the following files containing 000000057 events
ft970325_1338_0040G203770H.fits-> Ignoring the following files containing 000000056 events
ft970325_1338_0040G200770L.fits ft970325_1338_0040G202070L.fits-> Ignoring the following files containing 000000055 events
ft970325_1338_0040G201070H.fits-> Ignoring the following files containing 000000052 events
ft970325_1338_0040G202770H.fits-> Ignoring the following files containing 000000025 events
ft970325_1338_0040G200470M.fits-> Ignoring the following files containing 000000009 events
ft970325_1338_0040G201470L.fits-> Collecting GIS3 event files by mode
GISSORTCODE:LO:Start program GISSORTCODE:LO:End program-> Standard Error Output From STOOL gissortsplit:
GISSORTSPLIT:LO:Start program GISSORTSPLIT:LO:g300170h.prelist merge count = 1 photon cnt = 79 GISSORTSPLIT:LO:g300270h.prelist merge count = 1 photon cnt = 117 GISSORTSPLIT:LO:g300370h.prelist merge count = 9 photon cnt = 360647 GISSORTSPLIT:LO:g300470h.prelist merge count = 2 photon cnt = 150 GISSORTSPLIT:LO:g300570h.prelist merge count = 1 photon cnt = 77 GISSORTSPLIT:LO:g300670h.prelist merge count = 1 photon cnt = 59 GISSORTSPLIT:LO:g300770h.prelist merge count = 1 photon cnt = 73 GISSORTSPLIT:LO:g300870h.prelist merge count = 1 photon cnt = 47 GISSORTSPLIT:LO:g300970h.prelist merge count = 1 photon cnt = 54 GISSORTSPLIT:LO:g300170l.prelist merge count = 1 photon cnt = 12 GISSORTSPLIT:LO:g300270l.prelist merge count = 2 photon cnt = 62 GISSORTSPLIT:LO:g300370l.prelist merge count = 8 photon cnt = 8371 GISSORTSPLIT:LO:g300470l.prelist merge count = 4 photon cnt = 1075 GISSORTSPLIT:LO:g300170m.prelist merge count = 1 photon cnt = 24 GISSORTSPLIT:LO:g300270m.prelist merge count = 7 photon cnt = 192742 GISSORTSPLIT:LO:g300370m.prelist merge count = 1 photon cnt = 255 GISSORTSPLIT:LO:g300470m.prelist merge count = 1 photon cnt = 255 GISSORTSPLIT:LO:g300570m.prelist merge count = 1 photon cnt = 256 GISSORTSPLIT:LO:Total filenames split = 44 GISSORTSPLIT:LO:Total split file cnt = 18 GISSORTSPLIT:LO:End program-> Creating ad11502010g300170h.unf
---- cmerge: version 1.5 ---- A total of 9 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040G300270H.fits 2 -- ft970325_1338_0040G301270H.fits 3 -- ft970325_1338_0040G301770H.fits 4 -- ft970325_1338_0040G302370H.fits 5 -- ft970325_1338_0040G303070H.fits 6 -- ft970325_1338_0040G303270H.fits 7 -- ft970325_1338_0040G303470H.fits 8 -- ft970325_1338_0040G303670H.fits 9 -- ft970325_1338_0040G304070H.fits Merging binary extension #: 2 1 -- ft970325_1338_0040G300270H.fits 2 -- ft970325_1338_0040G301270H.fits 3 -- ft970325_1338_0040G301770H.fits 4 -- ft970325_1338_0040G302370H.fits 5 -- ft970325_1338_0040G303070H.fits 6 -- ft970325_1338_0040G303270H.fits 7 -- ft970325_1338_0040G303470H.fits 8 -- ft970325_1338_0040G303670H.fits 9 -- ft970325_1338_0040G304070H.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad11502010g300270m.unf
---- cmerge: version 1.5 ---- A total of 7 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040G300170M.fits 2 -- ft970325_1338_0040G300370M.fits 3 -- ft970325_1338_0040G301870M.fits 4 -- ft970325_1338_0040G302470M.fits 5 -- ft970325_1338_0040G303770M.fits 6 -- ft970325_1338_0040G304170M.fits 7 -- ft970325_1338_0040G304770M.fits Merging binary extension #: 2 1 -- ft970325_1338_0040G300170M.fits 2 -- ft970325_1338_0040G300370M.fits 3 -- ft970325_1338_0040G301870M.fits 4 -- ft970325_1338_0040G302470M.fits 5 -- ft970325_1338_0040G303770M.fits 6 -- ft970325_1338_0040G304170M.fits 7 -- ft970325_1338_0040G304770M.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad11502010g300370l.unf
---- cmerge: version 1.5 ---- A total of 8 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040G300870L.fits 2 -- ft970325_1338_0040G301670L.fits 3 -- ft970325_1338_0040G301970L.fits 4 -- ft970325_1338_0040G302270L.fits 5 -- ft970325_1338_0040G302670L.fits 6 -- ft970325_1338_0040G303970L.fits 7 -- ft970325_1338_0040G304370L.fits 8 -- ft970325_1338_0040G304970L.fits Merging binary extension #: 2 1 -- ft970325_1338_0040G300870L.fits 2 -- ft970325_1338_0040G301670L.fits 3 -- ft970325_1338_0040G301970L.fits 4 -- ft970325_1338_0040G302270L.fits 5 -- ft970325_1338_0040G302670L.fits 6 -- ft970325_1338_0040G303970L.fits 7 -- ft970325_1338_0040G304370L.fits 8 -- ft970325_1338_0040G304970L.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad11502010g300470l.unf
---- cmerge: version 1.5 ---- A total of 4 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040G302570L.fits 2 -- ft970325_1338_0040G303870L.fits 3 -- ft970325_1338_0040G304270L.fits 4 -- ft970325_1338_0040G304870L.fits Merging binary extension #: 2 1 -- ft970325_1338_0040G302570L.fits 2 -- ft970325_1338_0040G303870L.fits 3 -- ft970325_1338_0040G304270L.fits 4 -- ft970325_1338_0040G304870L.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Ignoring the following files containing 000000256 events
ft970325_1338_0040G304570M.fits-> Ignoring the following files containing 000000255 events
ft970325_1338_0040G304470M.fits-> Ignoring the following files containing 000000255 events
ft970325_1338_0040G304670M.fits-> Ignoring the following files containing 000000150 events
ft970325_1338_0040G301170H.fits ft970325_1338_0040G302970H.fits-> Ignoring the following files containing 000000117 events
ft970325_1338_0040G303170H.fits-> Ignoring the following files containing 000000079 events
ft970325_1338_0040G303370H.fits-> Ignoring the following files containing 000000077 events
ft970325_1338_0040G300970H.fits-> Ignoring the following files containing 000000073 events
ft970325_1338_0040G302770H.fits-> Ignoring the following files containing 000000062 events
ft970325_1338_0040G300770L.fits ft970325_1338_0040G302170L.fits-> Ignoring the following files containing 000000059 events
ft970325_1338_0040G301070H.fits-> Ignoring the following files containing 000000054 events
ft970325_1338_0040G303570H.fits-> Ignoring the following files containing 000000047 events
ft970325_1338_0040G302870H.fits-> Ignoring the following files containing 000000024 events
ft970325_1338_0040G300470M.fits-> Ignoring the following files containing 000000012 events
ft970325_1338_0040G301570L.fits-> Collecting SIS0 event files by mode
SIS0SORTCODE:LO:Start program SIS0SORTCODE:LO:End program-> Standard Error Output From STOOL sis0sortsplit:
SIS0SORTSPLIT:LO:Start program SIS0SORTSPLIT:LO:s000102h.prelist merge count = 2 photon cnt = 104095 SIS0SORTSPLIT:LO:s000202h.prelist merge count = 1 photon cnt = 11972 SIS0SORTSPLIT:LO:s000302h.prelist merge count = 1 photon cnt = 20023 SIS0SORTSPLIT:LO:s000402h.prelist merge count = 3 photon cnt = 46908 SIS0SORTSPLIT:LO:s000502h.prelist merge count = 1 photon cnt = 60 SIS0SORTSPLIT:LO:s000602l.prelist merge count = 4 photon cnt = 26780 SIS0SORTSPLIT:LO:s000702l.prelist merge count = 4 photon cnt = 22333 SIS0SORTSPLIT:LO:s000802l.prelist merge count = 3 photon cnt = 13459 SIS0SORTSPLIT:LO:s000902l.prelist merge count = 1 photon cnt = 7564 SIS0SORTSPLIT:LO:s001002l.prelist merge count = 1 photon cnt = 32 SIS0SORTSPLIT:LO:s001102l.prelist merge count = 1 photon cnt = 288 SIS0SORTSPLIT:LO:s001202m.prelist merge count = 2 photon cnt = 80695 SIS0SORTSPLIT:LO:s001302m.prelist merge count = 2 photon cnt = 47792 SIS0SORTSPLIT:LO:s001402m.prelist merge count = 1 photon cnt = 9412 SIS0SORTSPLIT:LO:s001502m.prelist merge count = 3 photon cnt = 57400 SIS0SORTSPLIT:LO:Total filenames split = 30 SIS0SORTSPLIT:LO:Total split file cnt = 15 SIS0SORTSPLIT:LO:End program-> Creating ad11502010s000102h.unf
---- cmerge: version 1.5 ---- A total of 2 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040S001702H.fits 2 -- ft970325_1338_0040S002802H.fits Merging binary extension #: 2 1 -- ft970325_1338_0040S001702H.fits 2 -- ft970325_1338_0040S002802H.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad11502010s000202m.unf
---- cmerge: version 1.5 ---- A total of 2 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040S001802M.fits 2 -- ft970325_1338_0040S002902M.fits Merging binary extension #: 2 1 -- ft970325_1338_0040S001802M.fits 2 -- ft970325_1338_0040S002902M.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad11502010s000302m.unf
---- cmerge: version 1.5 ---- A total of 3 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040S000102M.fits 2 -- ft970325_1338_0040S000302M.fits 3 -- ft970325_1338_0040S002402M.fits Merging binary extension #: 2 1 -- ft970325_1338_0040S000102M.fits 2 -- ft970325_1338_0040S000302M.fits 3 -- ft970325_1338_0040S002402M.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad11502010s000402m.unf
---- cmerge: version 1.5 ---- A total of 2 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040S001202M.fits 2 -- ft970325_1338_0040S003202M.fits Merging binary extension #: 2 1 -- ft970325_1338_0040S001202M.fits 2 -- ft970325_1338_0040S003202M.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad11502010s000502h.unf
---- cmerge: version 1.5 ---- A total of 3 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040S000202H.fits 2 -- ft970325_1338_0040S002102H.fits 3 -- ft970325_1338_0040S002302H.fits Merging binary extension #: 2 1 -- ft970325_1338_0040S000202H.fits 2 -- ft970325_1338_0040S002102H.fits 3 -- ft970325_1338_0040S002302H.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad11502010s000602l.unf
---- cmerge: version 1.5 ---- A total of 4 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040S001602L.fits 2 -- ft970325_1338_0040S001902L.fits 3 -- ft970325_1338_0040S002702L.fits 4 -- ft970325_1338_0040S003002L.fits Merging binary extension #: 2 1 -- ft970325_1338_0040S001602L.fits 2 -- ft970325_1338_0040S001902L.fits 3 -- ft970325_1338_0040S002702L.fits 4 -- ft970325_1338_0040S003002L.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad11502010s000702l.unf
---- cmerge: version 1.5 ---- A total of 4 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040S001002L.fits 2 -- ft970325_1338_0040S001302L.fits 3 -- ft970325_1338_0040S003102L.fits 4 -- ft970325_1338_0040S003302L.fits Merging binary extension #: 2 1 -- ft970325_1338_0040S001002L.fits 2 -- ft970325_1338_0040S001302L.fits 3 -- ft970325_1338_0040S003102L.fits 4 -- ft970325_1338_0040S003302L.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Checking ft970325_1338_0040S000702H.fits
---- cmerge: version 1.5 ---- A total of 1 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040S000702H.fits Merging binary extension #: 2 1 -- ft970325_1338_0040S000702H.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad11502010s000902l.unf
---- cmerge: version 1.5 ---- A total of 3 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040S000602L.fits 2 -- ft970325_1338_0040S000802L.fits 3 -- ft970325_1338_0040S002602L.fits Merging binary extension #: 2 1 -- ft970325_1338_0040S000602L.fits 2 -- ft970325_1338_0040S000802L.fits 3 -- ft970325_1338_0040S002602L.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Checking ft970325_1338_0040S001102H.fits
---- cmerge: version 1.5 ---- A total of 1 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040S001102H.fits Merging binary extension #: 2 1 -- ft970325_1338_0040S001102H.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Checking ft970325_1338_0040S002502M.fits
---- cmerge: version 1.5 ---- A total of 1 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040S002502M.fits Merging binary extension #: 2 1 -- ft970325_1338_0040S002502M.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Checking ft970325_1338_0040S002002L.fits
---- cmerge: version 1.5 ---- A total of 1 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040S002002L.fits Merging binary extension #: 2 1 -- ft970325_1338_0040S002002L.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Ignoring the following files containing 000000288 events
ft970325_1338_0040S000902L.fits-> Ignoring the following files containing 000000060 events
ft970325_1338_0040S002202H.fits-> Ignoring the following files containing 000000032 events
ft970325_1338_0040S001502L.fits-> Collecting SIS1 event files by mode
SIS1SORTCODE:LO:Start program SIS1SORTCODE:LO:End program-> Standard Error Output From STOOL sis1sortsplit:
SIS1SORTSPLIT:LO:Start program SIS1SORTSPLIT:LO:s100102h.prelist merge count = 1 photon cnt = 155 SIS1SORTSPLIT:LO:s100202h.prelist merge count = 1 photon cnt = 16373 SIS1SORTSPLIT:LO:s100302h.prelist merge count = 3 photon cnt = 56616 SIS1SORTSPLIT:LO:s100402h.prelist merge count = 2 photon cnt = 136420 SIS1SORTSPLIT:LO:s100502h.prelist merge count = 1 photon cnt = 6698 SIS1SORTSPLIT:LO:s100602l.prelist merge count = 3 photon cnt = 13128 SIS1SORTSPLIT:LO:s100702l.prelist merge count = 1 photon cnt = 5548 SIS1SORTSPLIT:LO:s100802l.prelist merge count = 4 photon cnt = 27477 SIS1SORTSPLIT:LO:s100902l.prelist merge count = 4 photon cnt = 19842 SIS1SORTSPLIT:LO:s101002l.prelist merge count = 1 photon cnt = 32 SIS1SORTSPLIT:LO:s101102l.prelist merge count = 1 photon cnt = 288 SIS1SORTSPLIT:LO:s101202m.prelist merge count = 1 photon cnt = 7965 SIS1SORTSPLIT:LO:s101302m.prelist merge count = 3 photon cnt = 57658 SIS1SORTSPLIT:LO:s101402m.prelist merge count = 2 photon cnt = 97061 SIS1SORTSPLIT:LO:s101502m.prelist merge count = 2 photon cnt = 29275 SIS1SORTSPLIT:LO:Total filenames split = 30 SIS1SORTSPLIT:LO:Total split file cnt = 15 SIS1SORTSPLIT:LO:End program-> Creating ad11502010s100102h.unf
---- cmerge: version 1.5 ---- A total of 2 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040S101702H.fits 2 -- ft970325_1338_0040S102802H.fits Merging binary extension #: 2 1 -- ft970325_1338_0040S101702H.fits 2 -- ft970325_1338_0040S102802H.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad11502010s100202m.unf
---- cmerge: version 1.5 ---- A total of 2 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040S101802M.fits 2 -- ft970325_1338_0040S102902M.fits Merging binary extension #: 2 1 -- ft970325_1338_0040S101802M.fits 2 -- ft970325_1338_0040S102902M.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad11502010s100302m.unf
---- cmerge: version 1.5 ---- A total of 3 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040S100102M.fits 2 -- ft970325_1338_0040S100302M.fits 3 -- ft970325_1338_0040S102402M.fits Merging binary extension #: 2 1 -- ft970325_1338_0040S100102M.fits 2 -- ft970325_1338_0040S100302M.fits 3 -- ft970325_1338_0040S102402M.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad11502010s100402h.unf
---- cmerge: version 1.5 ---- A total of 3 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040S100202H.fits 2 -- ft970325_1338_0040S102102H.fits 3 -- ft970325_1338_0040S102302H.fits Merging binary extension #: 2 1 -- ft970325_1338_0040S100202H.fits 2 -- ft970325_1338_0040S102102H.fits 3 -- ft970325_1338_0040S102302H.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad11502010s100502m.unf
---- cmerge: version 1.5 ---- A total of 2 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040S101202M.fits 2 -- ft970325_1338_0040S103202M.fits Merging binary extension #: 2 1 -- ft970325_1338_0040S101202M.fits 2 -- ft970325_1338_0040S103202M.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad11502010s100602l.unf
---- cmerge: version 1.5 ---- A total of 4 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040S101602L.fits 2 -- ft970325_1338_0040S101902L.fits 3 -- ft970325_1338_0040S102702L.fits 4 -- ft970325_1338_0040S103002L.fits Merging binary extension #: 2 1 -- ft970325_1338_0040S101602L.fits 2 -- ft970325_1338_0040S101902L.fits 3 -- ft970325_1338_0040S102702L.fits 4 -- ft970325_1338_0040S103002L.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad11502010s100702l.unf
---- cmerge: version 1.5 ---- A total of 4 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040S101002L.fits 2 -- ft970325_1338_0040S101302L.fits 3 -- ft970325_1338_0040S103102L.fits 4 -- ft970325_1338_0040S103302L.fits Merging binary extension #: 2 1 -- ft970325_1338_0040S101002L.fits 2 -- ft970325_1338_0040S101302L.fits 3 -- ft970325_1338_0040S103102L.fits 4 -- ft970325_1338_0040S103302L.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Checking ft970325_1338_0040S100702H.fits
---- cmerge: version 1.5 ---- A total of 1 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040S100702H.fits Merging binary extension #: 2 1 -- ft970325_1338_0040S100702H.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad11502010s100902l.unf
---- cmerge: version 1.5 ---- A total of 3 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040S100602L.fits 2 -- ft970325_1338_0040S100802L.fits 3 -- ft970325_1338_0040S102602L.fits Merging binary extension #: 2 1 -- ft970325_1338_0040S100602L.fits 2 -- ft970325_1338_0040S100802L.fits 3 -- ft970325_1338_0040S102602L.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Checking ft970325_1338_0040S102502M.fits
---- cmerge: version 1.5 ---- A total of 1 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040S102502M.fits Merging binary extension #: 2 1 -- ft970325_1338_0040S102502M.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Checking ft970325_1338_0040S101102H.fits
---- cmerge: version 1.5 ---- A total of 1 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040S101102H.fits Merging binary extension #: 2 1 -- ft970325_1338_0040S101102H.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Checking ft970325_1338_0040S102002L.fits
---- cmerge: version 1.5 ---- A total of 1 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft970325_1338_0040S102002L.fits Merging binary extension #: 2 1 -- ft970325_1338_0040S102002L.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Ignoring the following files containing 000000288 events
ft970325_1338_0040S100902L.fits-> Ignoring the following files containing 000000155 events
ft970325_1338_0040S102202H.fits-> Ignoring the following files containing 000000032 events
ft970325_1338_0040S101502L.fits-> Tar-ing together the leftover raw files
a ft970325_1338_0040G200470M.fits 40K a ft970325_1338_0040G200770L.fits 40K a ft970325_1338_0040G200970H.fits 40K a ft970325_1338_0040G201070H.fits 40K a ft970325_1338_0040G201170H.fits 40K a ft970325_1338_0040G201470L.fits 40K a ft970325_1338_0040G202070L.fits 40K a ft970325_1338_0040G202670H.fits 40K a ft970325_1338_0040G202770H.fits 40K a ft970325_1338_0040G202870H.fits 40K a ft970325_1338_0040G203070H.fits 40K a ft970325_1338_0040G203270H.fits 40K a ft970325_1338_0040G203470H.fits 43K a ft970325_1338_0040G203670H.fits 40K a ft970325_1338_0040G203770H.fits 40K a ft970325_1338_0040G203870H.fits 40K a ft970325_1338_0040G203970H.fits 40K a ft970325_1338_0040G204870M.fits 45K a ft970325_1338_0040G204970M.fits 45K a ft970325_1338_0040G205070M.fits 45K a ft970325_1338_0040G300470M.fits 40K a ft970325_1338_0040G300770L.fits 40K a ft970325_1338_0040G300970H.fits 40K a ft970325_1338_0040G301070H.fits 40K a ft970325_1338_0040G301170H.fits 40K a ft970325_1338_0040G301570L.fits 40K a ft970325_1338_0040G302170L.fits 40K a ft970325_1338_0040G302770H.fits 40K a ft970325_1338_0040G302870H.fits 40K a ft970325_1338_0040G302970H.fits 40K a ft970325_1338_0040G303170H.fits 43K a ft970325_1338_0040G303370H.fits 40K a ft970325_1338_0040G303570H.fits 40K a ft970325_1338_0040G304470M.fits 45K a ft970325_1338_0040G304570M.fits 45K a ft970325_1338_0040G304670M.fits 45K a ft970325_1338_0040S000902L.fits 45K a ft970325_1338_0040S001502L.fits 40K a ft970325_1338_0040S002202H.fits 40K a ft970325_1338_0040S100902L.fits 45K a ft970325_1338_0040S101502L.fits 40K a ft970325_1338_0040S102202H.fits 43K-> Checking OBJECT keywords in HK and event files
temp2gain v4.2 opening ft970325_1338.0040 'ft970325_1338.0040' is successfully opened Data Start Time is 133450736.47 (970325 133856) Time Margin 2.0 sec included Sync error detected in 4658 th SF Sync error detected in 4662 th SF Sync error detected in 4666 th SF Sync error detected in 4667 th SF Sync error detected in 4668 th SF Sync error detected in 4669 th SF Sync error detected in 4670 th SF Sync error detected in 4675 th SF Sync error detected in 4676 th SF Sync error detected in 4680 th SF Sync error detected in 4812 th SF Sync error detected in 4817 th SF Sync error detected in 4820 th SF Sync error detected in 4821 th SF Sync error detected in 4823 th SF Sync error detected in 4826 th SF Sync error detected in 4935 th SF Sync error detected in 4936 th SF Sync error detected in 4937 th SF Sync error detected in 4938 th SF Sync error detected in 4949 th SF Sync error detected in 5032 th SF Sync error detected in 5033 th SF Sync error detected in 5034 th SF Sync error detected in 5116 th SF Sync error detected in 5118 th SF Sync error detected in 5119 th SF Sync error detected in 5209 th SF 'ft970325_1338.0040' EOF detected, sf=6547 Data End Time is 133490452.35 (970326 004052) Gain History is written in ft970325_1338_0040.ghf-> Checking if column CAL_START in ft970325_1338_0040.ghf[1] is in order
Time column is TIME ORDERED-> Checking if column CAL_STOP in ft970325_1338_0040.ghf[1] is in order
Time column is TIME ORDERED
ASCALIN_V0.9t-> Checking if ad11502010g200270m.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010g200370l.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010g200470l.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010g300170h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010g300270m.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010g300370l.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010g300470l.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010s000102h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010s000202m.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010s000302m.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010s000402m.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010s000502h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010s000602l.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010s000702l.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010s000802h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010s000902l.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010s001002h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010s001102m.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010s001202l.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010s100102h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010s100202m.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010s100302m.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010s100402h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010s100502m.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010s100602l.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010s100702l.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010s100802h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010s100902l.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010s101002m.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010s101102h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad11502010s101202l.unf is covered by attitude file
ASCALIN_V0.9t
Date and time are: 97/ 3/25 13:38 mjd=50532.568056 Orbit file name is ./frf.orbit.201 Epoch of Orbital Elements: 1997/3/24 15:0:0 Rigidity Data File: ./rigidity.data.1.23 Attitude FRF: fa970325_1338.0040 S0-HK file: ft970325_1338_0040S0HK.fits S1-HK file: ft970325_1338_0040S1HK.fits G2-HK file: ft970325_1338_0040G2HK.fits G3-HK file: ft970325_1338_0040G3HK.fits output FITS File: ft970325_1338_0040.mkf Total 1242 Data bins were processed.-> Checking if column TIME in ft970325_1338_0040.mkf is in order
Time column is TIME ORDERED-> Calculating dead time values for filter file
The sum of the selected column is 6586.3946 The mean of the selected column is 57.272996 The standard deviation of the selected column is 11.287041 The minimum of selected column is 40.375122 The maximum of selected column is 121.75037 The number of points used in calculation is 115-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S0_PIXL3>23.4 && S0_PIXL3<91.1 ) ) &&( (S0_SATF3<1) ||(S0_SATF3>1)) &&( (S0_SATF3<1) ||(S0_SATF3>1)) &&( (S0_SATF3<1) ||(S0_SATF3>1)) &&( (S0_SATF3<1) ||(S0_SATF3>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.39E+04 104095 0001 Processing file: /data/data15/seq_proc/11502010.006/ad11502010s000102h.unf EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/screen_work1001.xsl Total Good Bad: Region Time Phase Cut 81467 78447 0 3020 0 0 Writing events file 78447 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 81467 78447 0 3020 0 0 in 3775.72 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data15/seq_proc/11502010.006/screen_in_event.xsl reading data file: /data/data15/seq_proc/11502010.006/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 78447 copy bad pix array... cleaning chip # 0 cleaning chip # 1 cleaning chip # 2 cleaning chip # 3 Hot pixels & counts : 1 942 Flickering pixels iter, pixels & cnts : 1 3 182 Number of pixels rejected : 4 Number of (internal) image counts : 78447 Number of image cts rejected (N, %) : 1124 1.4328145 By chip : 0 1 2 3 Pixels rejected : 0 0 0 4 Image counts : 0 0 0 78447 Image cts rejected: 0 0 0 1124 Image cts rej (%) : 0.00 0.00 0.00 1.43 filtering data... Total counts : 0 0 0 78447 Total cts rejected: 0 0 0 1124 Total cts rej (%) : 0.00 0.00 0.00 1.43 Number of clean counts accepted : 77323 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 4 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010s000102h.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS0-BRIGHT > extract events !screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS0-BRIGHT > save clean outfile=ad11502010s000102h.evt use_events=no Wrote cleaned events file to ad11502010s000102h.evt !screen:ASCA-SIS0-BRIGHT > exit save_session=no-> Filtering ad11502010s000202m.unf into ad11502010s000202m.evt
The sum of the selected column is 3739.5737 The mean of the selected column is 59.358312 The standard deviation of the selected column is 12.052859 The minimum of selected column is 38.656364 The maximum of selected column is 114.28159 The number of points used in calculation is 63-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S0_PIXL3>23.1 && S0_PIXL3<95.5 ) ) &&( (S0_SATF3<1) ||(S0_SATF3>1)) &&( (S0_SATF3<1) ||(S0_SATF3>1)) &&( (S0_SATF3<1) ||(S0_SATF3>1)) &&( (S0_SATF3<1) ||(S0_SATF3>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 19:15:20 0.31E+04 80695 0001 Processing file: /data/data15/seq_proc/11502010.006/ad11502010s000202m.unf EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/screen_work1001.xsl Total Good Bad: Region Time Phase Cut 61630 42824 0 18806 0 0 Writing events file 42824 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 61630 42824 0 18806 0 0 in 2132.15 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data15/seq_proc/11502010.006/screen_in_event.xsl reading data file: /data/data15/seq_proc/11502010.006/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 42824 copy bad pix array... cleaning chip # 0 cleaning chip # 1 cleaning chip # 2 cleaning chip # 3 Hot pixels & counts : 1 534 Flickering pixels iter, pixels & cnts : 1 7 136 Number of pixels rejected : 8 Number of (internal) image counts : 42824 Number of image cts rejected (N, %) : 670 1.5645432 By chip : 0 1 2 3 Pixels rejected : 0 0 0 8 Image counts : 0 0 0 42824 Image cts rejected: 0 0 0 670 Image cts rej (%) : 0.00 0.00 0.00 1.56 filtering data... Total counts : 0 0 0 42824 Total cts rejected: 0 0 0 670 Total cts rej (%) : 0.00 0.00 0.00 1.56 Number of clean counts accepted : 42154 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 8 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010s000202m.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS0-BRIGHT > extract events !screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS0-BRIGHT > save clean outfile=ad11502010s000202m.evt use_events=no Wrote cleaned events file to ad11502010s000202m.evt !screen:ASCA-SIS0-BRIGHT > exit save_session=no-> Filtering ad11502010s000302m.unf into ad11502010s000302m.evt
The sum of the selected column is 625.04504 The mean of the selected column is 34.724724 The standard deviation of the selected column is 6.4416600 The minimum of selected column is 23.068258 The maximum of selected column is 49.281399 The number of points used in calculation is 18-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S0_PIXL0>15.3 && S0_PIXL0<54 ) ) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 13:39:04 0.30E+04 57400 1000 Processing file: /data/data15/seq_proc/11502010.006/ad11502010s000302m.unf EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/screen_work1001.xsl Total Good Bad: Region Time Phase Cut 32775 22291 0 10484 0 0 Writing events file 22291 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 32775 22291 0 10484 0 0 in 1669.24 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data15/seq_proc/11502010.006/screen_in_event.xsl reading data file: /data/data15/seq_proc/11502010.006/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 22291 copy bad pix array... cleaning chip # 0 Hot pixels & counts : 21 7762 Flickering pixels iter, pixels & cnts : 1 7 61 cleaning chip # 1 cleaning chip # 2 cleaning chip # 3 Number of pixels rejected : 28 Number of (internal) image counts : 22291 Number of image cts rejected (N, %) : 7823 35.0948830 By chip : 0 1 2 3 Pixels rejected : 28 0 0 0 Image counts : 22291 0 0 0 Image cts rejected: 7823 0 0 0 Image cts rej (%) : 35.09 0.00 0.00 0.00 filtering data... Total counts : 22291 0 0 0 Total cts rejected: 7823 0 0 0 Total cts rej (%) : 35.09 0.00 0.00 0.00 Number of clean counts accepted : 14468 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 28 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010s000302m.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS0-BRIGHT > extract events !screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS0-BRIGHT > save clean outfile=ad11502010s000302m.evt use_events=no Wrote cleaned events file to ad11502010s000302m.evt !screen:ASCA-SIS0-BRIGHT > exit save_session=no-> Filtering ad11502010s000402m.unf into ad11502010s000402m.evt
The sum of the selected column is 4659.5139 The mean of the selected column is 33.521683 The standard deviation of the selected column is 12.213438 The minimum of selected column is 15.687547 The maximum of selected column is 95.625282 The number of points used in calculation is 139-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S0_PIXL2>0.0 && S0_PIXL2<70.1 ) ) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 17:30:16 0.58E+04 47792 0010 Processing file: /data/data15/seq_proc/11502010.006/ad11502010s000402m.unf EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/screen_work1001.xsl Total Good Bad: Region Time Phase Cut 32050 25540 0 6510 0 0 Writing events file 25540 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 32050 25540 0 6510 0 0 in 4618.04 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data15/seq_proc/11502010.006/screen_in_event.xsl reading data file: /data/data15/seq_proc/11502010.006/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 25540 copy bad pix array... cleaning chip # 0 cleaning chip # 1 cleaning chip # 2 Hot pixels & counts : 1 923 Flickering pixels iter, pixels & cnts : 1 6 76 cleaning chip # 3 Number of pixels rejected : 7 Number of (internal) image counts : 25540 Number of image cts rejected (N, %) : 999 3.9115114 By chip : 0 1 2 3 Pixels rejected : 0 0 7 0 Image counts : 0 0 25540 0 Image cts rejected: 0 0 999 0 Image cts rej (%) : 0.00 0.00 3.91 0.00 filtering data... Total counts : 0 0 25540 0 Total cts rejected: 0 0 999 0 Total cts rej (%) : 0.00 0.00 3.91 0.00 Number of clean counts accepted : 24541 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 7 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010s000402m.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS0-BRIGHT > extract events !screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS0-BRIGHT > save clean outfile=ad11502010s000402m.evt use_events=no Wrote cleaned events file to ad11502010s000402m.evt !screen:ASCA-SIS0-BRIGHT > exit save_session=no-> Filtering ad11502010s000502h.unf into ad11502010s000502h.evt
The sum of the selected column is 756.34151 The mean of the selected column is 39.807448 The standard deviation of the selected column is 15.590260 The minimum of selected column is 27.531332 The maximum of selected column is 93.750275 The number of points used in calculation is 19-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S0_PIXL0>0.0 && S0_PIXL0<86.5 ) ) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 14:00:08 0.24E+04 46908 1000 Processing file: /data/data15/seq_proc/11502010.006/ad11502010s000502h.unf EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/screen_work1001.xsl Total Good Bad: Region Time Phase Cut 39050 25232 0 13818 0 0 Writing events file 25232 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 39050 25232 0 13818 0 0 in 1841.61 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data15/seq_proc/11502010.006/screen_in_event.xsl reading data file: /data/data15/seq_proc/11502010.006/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 25232 copy bad pix array... cleaning chip # 0 Hot pixels & counts : 21 8754 Flickering pixels iter, pixels & cnts : 1 12 122 cleaning chip # 1 cleaning chip # 2 cleaning chip # 3 Number of pixels rejected : 33 Number of (internal) image counts : 25232 Number of image cts rejected (N, %) : 8876 35.1775513 By chip : 0 1 2 3 Pixels rejected : 33 0 0 0 Image counts : 25232 0 0 0 Image cts rejected: 8876 0 0 0 Image cts rej (%) : 35.18 0.00 0.00 0.00 filtering data... Total counts : 25232 0 0 0 Total cts rejected: 8876 0 0 0 Total cts rej (%) : 35.18 0.00 0.00 0.00 Number of clean counts accepted : 16356 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 33 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010s000502h.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS0-BRIGHT > extract events !screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS0-BRIGHT > save clean outfile=ad11502010s000502h.evt use_events=no Wrote cleaned events file to ad11502010s000502h.evt !screen:ASCA-SIS0-BRIGHT > exit save_session=no-> Filtering ad11502010s000602l.unf into ad11502010s000602l.evt
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S0_PIXL3>0) ) &&( (S0_SATF3<1) ||(S0_SATF3>1)) &&( (S0_SATF3<1) ||(S0_SATF3>1)) &&( (S0_SATF3<1) ||(S0_SATF3>1)) &&( (S0_SATF3<1) ||(S0_SATF3>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT LOW 25/03/97 18:24:08 0.40E+04 26780 0001 Processing file: /data/data15/seq_proc/11502010.006/ad11502010s000602l.unf EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/screen_work1001.xsl Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data15/seq_proc/11502010.006/screen_in_event.xsl reading data file: /data/data15/seq_proc/11502010.006/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 0 copy bad pix array... cleaning chip # 0 cleaning chip # 1 cleaning chip # 2 cleaning chip # 3 Number of pixels rejected : 0 Number of (internal) image counts : 0 Number of image cts rejected (N, %) : 0 0.0000000 By chip : 0 1 2 3 Pixels rejected : 0 0 0 0 Image counts : 0 0 0 0 Image cts rejected: 0 0 0 0 Image cts rej (%) : 0.00 0.00 0.00 0.00 filtering data... Total counts : 0 0 0 0 Total cts rejected: 0 0 0 0 Total cts rej (%) : 0.00 0.00 0.00 0.00 Number of clean counts accepted : 0 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 0 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010s000602l.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS0-BRIGHT > extract events !screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS0-BRIGHT > save clean outfile=ad11502010s000602l.evt use_events=no Wrote cleaned events file to ad11502010s000602l.evt !screen:ASCA-SIS0-BRIGHT > exit save_session=no-> Deleting ad11502010s000602l.evt since it contains 0 events
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S0_PIXL2>0) ) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT LOW 25/03/97 16:49:12 0.34E+04 22333 0010 Processing file: /data/data15/seq_proc/11502010.006/ad11502010s000702l.unf EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/screen_work1001.xsl Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data15/seq_proc/11502010.006/screen_in_event.xsl reading data file: /data/data15/seq_proc/11502010.006/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 0 copy bad pix array... cleaning chip # 0 cleaning chip # 1 cleaning chip # 2 cleaning chip # 3 Number of pixels rejected : 0 Number of (internal) image counts : 0 Number of image cts rejected (N, %) : 0 0.0000000 By chip : 0 1 2 3 Pixels rejected : 0 0 0 0 Image counts : 0 0 0 0 Image cts rejected: 0 0 0 0 Image cts rej (%) : 0.00 0.00 0.00 0.00 filtering data... Total counts : 0 0 0 0 Total cts rejected: 0 0 0 0 Total cts rej (%) : 0.00 0.00 0.00 0.00 Number of clean counts accepted : 0 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 0 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010s000702l.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS0-BRIGHT > extract events !screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS0-BRIGHT > save clean outfile=ad11502010s000702l.evt use_events=no Wrote cleaned events file to ad11502010s000702l.evt !screen:ASCA-SIS0-BRIGHT > exit save_session=no-> Deleting ad11502010s000702l.evt since it contains 0 events
The sum of the selected column is 1996.2559 The mean of the selected column is 22.945471 The standard deviation of the selected column is 5.7499820 The minimum of selected column is 13.375040 The maximum of selected column is 42.187626 The number of points used in calculation is 87-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S0_PIXL1>5.6 && S0_PIXL1<40.1 ) ) &&( (S0_SATF1<1) ||(S0_SATF1>1)) &&( (S0_SATF1<1) ||(S0_SATF1>1)) &&( (S0_SATF1<1) ||(S0_SATF1>1)) &&( (S0_SATF1<1) ||(S0_SATF1>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 15:32:24 0.31E+04 20023 0100 Processing file: /data/data15/seq_proc/11502010.006/ad11502010s000802h.unf EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/screen_work1001.xsl Total Good Bad: Region Time Phase Cut 14189 12992 0 1197 0 0 Writing events file 12992 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 14189 12992 0 1197 0 0 in 2885.91 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data15/seq_proc/11502010.006/screen_in_event.xsl reading data file: /data/data15/seq_proc/11502010.006/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 12992 copy bad pix array... cleaning chip # 0 cleaning chip # 1 Hot pixels & counts : 2 780 Flickering pixels iter, pixels & cnts : 1 6 30 cleaning chip # 2 cleaning chip # 3 Number of pixels rejected : 8 Number of (internal) image counts : 12992 Number of image cts rejected (N, %) : 810 6.2346058 By chip : 0 1 2 3 Pixels rejected : 0 8 0 0 Image counts : 0 12992 0 0 Image cts rejected: 0 810 0 0 Image cts rej (%) : 0.00 6.23 0.00 0.00 filtering data... Total counts : 0 12992 0 0 Total cts rejected: 0 810 0 0 Total cts rej (%) : 0.00 6.23 0.00 0.00 Number of clean counts accepted : 12182 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 8 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010s000802h.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS0-BRIGHT > extract events !screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS0-BRIGHT > save clean outfile=ad11502010s000802h.evt use_events=no Wrote cleaned events file to ad11502010s000802h.evt !screen:ASCA-SIS0-BRIGHT > exit save_session=no-> Filtering ad11502010s000902l.unf into ad11502010s000902l.evt
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S0_PIXL1>0) ) &&( (S0_SATF1<1) ||(S0_SATF1>1)) &&( (S0_SATF1<1) ||(S0_SATF1>1)) &&( (S0_SATF1<1) ||(S0_SATF1>1)) &&( (S0_SATF1<1) ||(S0_SATF1>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT LOW 25/03/97 15:11:04 0.21E+04 13459 0100 Processing file: /data/data15/seq_proc/11502010.006/ad11502010s000902l.unf EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/screen_work1001.xsl Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data15/seq_proc/11502010.006/screen_in_event.xsl reading data file: /data/data15/seq_proc/11502010.006/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 0 copy bad pix array... cleaning chip # 0 cleaning chip # 1 cleaning chip # 2 cleaning chip # 3 Number of pixels rejected : 0 Number of (internal) image counts : 0 Number of image cts rejected (N, %) : 0 0.0000000 By chip : 0 1 2 3 Pixels rejected : 0 0 0 0 Image counts : 0 0 0 0 Image cts rejected: 0 0 0 0 Image cts rej (%) : 0.00 0.00 0.00 0.00 filtering data... Total counts : 0 0 0 0 Total cts rejected: 0 0 0 0 Total cts rej (%) : 0.00 0.00 0.00 0.00 Number of clean counts accepted : 0 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 0 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010s000902l.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS0-BRIGHT > extract events !screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS0-BRIGHT > save clean outfile=ad11502010s000902l.evt use_events=no Wrote cleaned events file to ad11502010s000902l.evt !screen:ASCA-SIS0-BRIGHT > exit save_session=no-> Deleting ad11502010s000902l.evt since it contains 0 events
The sum of the selected column is 1162.4409 The mean of the selected column is 30.590551 The standard deviation of the selected column is 7.5036000 The minimum of selected column is 19.687559 The maximum of selected column is 47.593891 The number of points used in calculation is 38-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S0_PIXL2>8 && S0_PIXL2<53.1 ) ) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 17:07:20 0.14E+04 11972 0010 Processing file: /data/data15/seq_proc/11502010.006/ad11502010s001002h.unf EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/screen_work1001.xsl Total Good Bad: Region Time Phase Cut 8756 7882 0 874 0 0 Writing events file 7882 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 8756 7882 0 874 0 0 in 1261.90 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data15/seq_proc/11502010.006/screen_in_event.xsl reading data file: /data/data15/seq_proc/11502010.006/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 7882 copy bad pix array... cleaning chip # 0 cleaning chip # 1 cleaning chip # 2 Hot pixels & counts : 1 256 Flickering pixels iter, pixels & cnts : 1 7 26 cleaning chip # 3 Number of pixels rejected : 8 Number of (internal) image counts : 7882 Number of image cts rejected (N, %) : 282 3.5777721 By chip : 0 1 2 3 Pixels rejected : 0 0 8 0 Image counts : 0 0 7882 0 Image cts rejected: 0 0 282 0 Image cts rej (%) : 0.00 0.00 3.58 0.00 filtering data... Total counts : 0 0 7882 0 Total cts rejected: 0 0 282 0 Total cts rej (%) : 0.00 0.00 3.58 0.00 Number of clean counts accepted : 7600 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 8 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010s001002h.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS0-BRIGHT > extract events !screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS0-BRIGHT > save clean outfile=ad11502010s001002h.evt use_events=no Wrote cleaned events file to ad11502010s001002h.evt !screen:ASCA-SIS0-BRIGHT > exit save_session=no-> Filtering ad11502010s001102m.unf into ad11502010s001102m.evt
The sum of the selected column is 998.05303 The mean of the selected column is 30.244031 The standard deviation of the selected column is 9.7757680 The minimum of selected column is 2.6563365 The maximum of selected column is 55.468914 The number of points used in calculation is 33-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S0_PIXL1>0.9 && S0_PIXL1<59.5 ) ) &&( (S0_SATF1<1) ||(S0_SATF1>1)) &&( (S0_SATF1<1) ||(S0_SATF1>1)) &&( (S0_SATF1<1) ||(S0_SATF1>1)) &&( (S0_SATF1<1) ||(S0_SATF1>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 20:50:00 0.13E+04 9412 0100 Processing file: /data/data15/seq_proc/11502010.006/ad11502010s001102m.unf EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/screen_work1001.xsl Total Good Bad: Region Time Phase Cut 6117 4823 0 1294 0 0 Writing events file 4823 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 6117 4823 0 1294 0 0 in 1059.83 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data15/seq_proc/11502010.006/screen_in_event.xsl reading data file: /data/data15/seq_proc/11502010.006/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 4823 copy bad pix array... cleaning chip # 0 Hot pixels & counts : 0 0 Flickering pixels iter, pixels & cnts : 1 17 68 cleaning chip # 1 Hot pixels & counts : 1 256 Flickering pixels iter, pixels & cnts : 1 2 25 cleaning chip # 2 cleaning chip # 3 Number of pixels rejected : 20 Number of (internal) image counts : 4823 Number of image cts rejected (N, %) : 349 7.2361603 By chip : 0 1 2 3 Pixels rejected : 17 3 0 0 Image counts : 214 4609 0 0 Image cts rejected: 68 281 0 0 Image cts rej (%) : 31.78 6.10 0.00 0.00 filtering data... Total counts : 214 4609 0 0 Total cts rejected: 68 281 0 0 Total cts rej (%) : 31.78 6.10 0.00 0.00 Number of clean counts accepted : 4474 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 20 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010s001102m.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS0-BRIGHT > extract events !screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS0-BRIGHT > save clean outfile=ad11502010s001102m.evt use_events=no Wrote cleaned events file to ad11502010s001102m.evt !screen:ASCA-SIS0-BRIGHT > exit save_session=no-> Filtering ad11502010s001202l.unf into ad11502010s001202l.evt
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S0_PIXL0>0) ) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT LOW 25/03/97 20:00:08 0.10E+04 7564 1000 Processing file: /data/data15/seq_proc/11502010.006/ad11502010s001202l.unf EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/screen_work1001.xsl Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data15/seq_proc/11502010.006/screen_in_event.xsl reading data file: /data/data15/seq_proc/11502010.006/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 0 copy bad pix array... cleaning chip # 0 cleaning chip # 1 cleaning chip # 2 cleaning chip # 3 Number of pixels rejected : 0 Number of (internal) image counts : 0 Number of image cts rejected (N, %) : 0 0.0000000 By chip : 0 1 2 3 Pixels rejected : 0 0 0 0 Image counts : 0 0 0 0 Image cts rejected: 0 0 0 0 Image cts rej (%) : 0.00 0.00 0.00 0.00 filtering data... Total counts : 0 0 0 0 Total cts rejected: 0 0 0 0 Total cts rej (%) : 0.00 0.00 0.00 0.00 Number of clean counts accepted : 0 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 0 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010s001202l.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS0-BRIGHT > extract events !screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS0-BRIGHT > save clean outfile=ad11502010s001202l.evt use_events=no Wrote cleaned events file to ad11502010s001202l.evt !screen:ASCA-SIS0-BRIGHT > exit save_session=no-> Deleting ad11502010s001202l.evt since it contains 0 events
The sum of the selected column is 7965.0236 The mean of the selected column is 69.868628 The standard deviation of the selected column is 12.506466 The minimum of selected column is 47.906391 The maximum of selected column is 129.68788 The number of points used in calculation is 114-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S1_PIXL1>32.3 && S1_PIXL1<107.3 ) ) &&( (S1_SATF1<1) ||(S1_SATF1>1)) &&( (S1_SATF1<1) ||(S1_SATF1>1)) &&( (S1_SATF1<1) ||(S1_SATF1>1)) &&( (S1_SATF1<1) ||(S1_SATF1>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.39E+04 136420 0100 Processing file: /data/data15/seq_proc/11502010.006/ad11502010s100102h.unf EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/screen_work1001.xsl Total Good Bad: Region Time Phase Cut 111123 105182 0 5941 0 0 Writing events file 105182 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 111123 105182 0 5941 0 0 in 3723.85 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data15/seq_proc/11502010.006/screen_in_event.xsl reading data file: /data/data15/seq_proc/11502010.006/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 105182 copy bad pix array... cleaning chip # 0 cleaning chip # 1 Hot pixels & counts : 11 8729 Flickering pixels iter, pixels & cnts : 1 18 254 cleaning chip # 2 cleaning chip # 3 Number of pixels rejected : 29 Number of (internal) image counts : 105182 Number of image cts rejected (N, %) : 8983 8.5404348 By chip : 0 1 2 3 Pixels rejected : 0 29 0 0 Image counts : 0 105182 0 0 Image cts rejected: 0 8983 0 0 Image cts rej (%) : 0.00 8.54 0.00 0.00 filtering data... Total counts : 0 105182 0 0 Total cts rejected: 0 8983 0 0 Total cts rej (%) : 0.00 8.54 0.00 0.00 Number of clean counts accepted : 96199 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 29 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010s100102h.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS1-BRIGHT > extract events !screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS1-BRIGHT > save clean outfile=ad11502010s100102h.evt use_events=no Wrote cleaned events file to ad11502010s100102h.evt !screen:ASCA-SIS1-BRIGHT > exit save_session=no-> Filtering ad11502010s100202m.unf into ad11502010s100202m.evt
The sum of the selected column is 4762.9517 The mean of the selected column is 75.602408 The standard deviation of the selected column is 14.108043 The minimum of selected column is 52.437656 The maximum of selected column is 121.81287 The number of points used in calculation is 63-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S1_PIXL1>33.2 && S1_PIXL1<117.9 ) ) &&( (S1_SATF1<1) ||(S1_SATF1>1)) &&( (S1_SATF1<1) ||(S1_SATF1>1)) &&( (S1_SATF1<1) ||(S1_SATF1>1)) &&( (S1_SATF1<1) ||(S1_SATF1>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 19:15:20 0.31E+04 97061 0100 Processing file: /data/data15/seq_proc/11502010.006/ad11502010s100202m.unf EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/screen_work1001.xsl Total Good Bad: Region Time Phase Cut 77241 53199 0 24042 0 0 Writing events file 53199 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 77241 53199 0 24042 0 0 in 2122.06 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data15/seq_proc/11502010.006/screen_in_event.xsl reading data file: /data/data15/seq_proc/11502010.006/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 53199 copy bad pix array... cleaning chip # 0 cleaning chip # 1 Hot pixels & counts : 10 4747 Flickering pixels iter, pixels & cnts : 1 8 237 cleaning chip # 2 cleaning chip # 3 Number of pixels rejected : 18 Number of (internal) image counts : 53199 Number of image cts rejected (N, %) : 4984 9.3685970 By chip : 0 1 2 3 Pixels rejected : 0 18 0 0 Image counts : 0 53199 0 0 Image cts rejected: 0 4984 0 0 Image cts rej (%) : 0.00 9.37 0.00 0.00 filtering data... Total counts : 0 53199 0 0 Total cts rejected: 0 4984 0 0 Total cts rej (%) : 0.00 9.37 0.00 0.00 Number of clean counts accepted : 48215 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 18 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010s100202m.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS1-BRIGHT > extract events !screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS1-BRIGHT > save clean outfile=ad11502010s100202m.evt use_events=no Wrote cleaned events file to ad11502010s100202m.evt !screen:ASCA-SIS1-BRIGHT > exit save_session=no-> Filtering ad11502010s100302m.unf into ad11502010s100302m.evt
The sum of the selected column is 782.11084 The mean of the selected column is 43.450602 The standard deviation of the selected column is 12.499360 The minimum of selected column is 24.477354 The maximum of selected column is 76.812729 The number of points used in calculation is 18-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S1_PIXL2>5.9 && S1_PIXL2<80.9 ) ) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 13:39:04 0.30E+04 57658 0010 Processing file: /data/data15/seq_proc/11502010.006/ad11502010s100302m.unf EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/screen_work1001.xsl Total Good Bad: Region Time Phase Cut 37188 28043 0 9145 0 0 Writing events file 28043 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 37188 28043 0 9145 0 0 in 1701.24 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data15/seq_proc/11502010.006/screen_in_event.xsl reading data file: /data/data15/seq_proc/11502010.006/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 28043 copy bad pix array... cleaning chip # 0 cleaning chip # 1 cleaning chip # 2 Hot pixels & counts : 6 2059 Flickering pixels iter, pixels & cnts : 1 9 67 cleaning chip # 3 Number of pixels rejected : 15 Number of (internal) image counts : 28043 Number of image cts rejected (N, %) : 2126 7.5812144 By chip : 0 1 2 3 Pixels rejected : 0 0 15 0 Image counts : 0 0 28043 0 Image cts rejected: 0 0 2126 0 Image cts rej (%) : 0.00 0.00 7.58 0.00 filtering data... Total counts : 0 0 28043 0 Total cts rejected: 0 0 2126 0 Total cts rej (%) : 0.00 0.00 7.58 0.00 Number of clean counts accepted : 25917 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 15 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010s100302m.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS1-BRIGHT > extract events !screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS1-BRIGHT > save clean outfile=ad11502010s100302m.evt use_events=no Wrote cleaned events file to ad11502010s100302m.evt !screen:ASCA-SIS1-BRIGHT > exit save_session=no-> Filtering ad11502010s100402h.unf into ad11502010s100402h.evt
The sum of the selected column is 875.16774 The mean of the selected column is 46.061460 The standard deviation of the selected column is 8.4438248 The minimum of selected column is 35.437607 The maximum of selected column is 66.156448 The number of points used in calculation is 19-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S1_PIXL2>20.7 && S1_PIXL2<71.3 ) ) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 14:00:08 0.24E+04 56616 0010 Processing file: /data/data15/seq_proc/11502010.006/ad11502010s100402h.unf EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/screen_work1001.xsl Total Good Bad: Region Time Phase Cut 46539 29342 0 17197 0 0 Writing events file 29342 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 46539 29342 0 17197 0 0 in 1769.47 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data15/seq_proc/11502010.006/screen_in_event.xsl reading data file: /data/data15/seq_proc/11502010.006/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 29342 copy bad pix array... cleaning chip # 0 cleaning chip # 1 cleaning chip # 2 Hot pixels & counts : 6 2207 Flickering pixels iter, pixels & cnts : 1 15 107 cleaning chip # 3 Number of pixels rejected : 21 Number of (internal) image counts : 29342 Number of image cts rejected (N, %) : 2314 7.8863063 By chip : 0 1 2 3 Pixels rejected : 0 0 21 0 Image counts : 0 0 29342 0 Image cts rejected: 0 0 2314 0 Image cts rej (%) : 0.00 0.00 7.89 0.00 filtering data... Total counts : 0 0 29342 0 Total cts rejected: 0 0 2314 0 Total cts rej (%) : 0.00 0.00 7.89 0.00 Number of clean counts accepted : 27028 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 21 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010s100402h.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS1-BRIGHT > extract events !screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS1-BRIGHT > save clean outfile=ad11502010s100402h.evt use_events=no Wrote cleaned events file to ad11502010s100402h.evt !screen:ASCA-SIS1-BRIGHT > exit save_session=no-> Filtering ad11502010s100502m.unf into ad11502010s100502m.evt
The sum of the selected column is 4508.9822 The mean of the selected column is 32.438721 The standard deviation of the selected column is 12.234645 The minimum of selected column is 11.343783 The maximum of selected column is 74.406471 The number of points used in calculation is 139-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S1_PIXL0>0.0 && S1_PIXL0<69.1 ) ) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 17:30:16 0.58E+04 29275 1000 Processing file: /data/data15/seq_proc/11502010.006/ad11502010s100502m.unf EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/screen_work1001.xsl Total Good Bad: Region Time Phase Cut 17095 13502 0 3593 0 0 Writing events file 13502 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 17095 13502 0 3593 0 0 in 4586.04 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data15/seq_proc/11502010.006/screen_in_event.xsl reading data file: /data/data15/seq_proc/11502010.006/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 13502 copy bad pix array... cleaning chip # 0 Hot pixels & counts : 8 4146 Flickering pixels iter, pixels & cnts : 1 9 125 cleaning chip # 1 cleaning chip # 2 cleaning chip # 3 Number of pixels rejected : 17 Number of (internal) image counts : 13502 Number of image cts rejected (N, %) : 4271 31.6323509 By chip : 0 1 2 3 Pixels rejected : 17 0 0 0 Image counts : 13502 0 0 0 Image cts rejected: 4271 0 0 0 Image cts rej (%) : 31.63 0.00 0.00 0.00 filtering data... Total counts : 13502 0 0 0 Total cts rejected: 4271 0 0 0 Total cts rej (%) : 31.63 0.00 0.00 0.00 Number of clean counts accepted : 9231 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 17 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010s100502m.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS1-BRIGHT > extract events !screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS1-BRIGHT > save clean outfile=ad11502010s100502m.evt use_events=no Wrote cleaned events file to ad11502010s100502m.evt !screen:ASCA-SIS1-BRIGHT > exit save_session=no-> Filtering ad11502010s100602l.unf into ad11502010s100602l.evt
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S1_PIXL1>0) ) &&( (S1_SATF1<1) ||(S1_SATF1>1)) &&( (S1_SATF1<1) ||(S1_SATF1>1)) &&( (S1_SATF1<1) ||(S1_SATF1>1)) &&( (S1_SATF1<1) ||(S1_SATF1>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT LOW 25/03/97 18:24:08 0.40E+04 27477 0100 Processing file: /data/data15/seq_proc/11502010.006/ad11502010s100602l.unf EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/screen_work1001.xsl Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data15/seq_proc/11502010.006/screen_in_event.xsl reading data file: /data/data15/seq_proc/11502010.006/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 0 copy bad pix array... cleaning chip # 0 cleaning chip # 1 cleaning chip # 2 cleaning chip # 3 Number of pixels rejected : 0 Number of (internal) image counts : 0 Number of image cts rejected (N, %) : 0 0.0000000 By chip : 0 1 2 3 Pixels rejected : 0 0 0 0 Image counts : 0 0 0 0 Image cts rejected: 0 0 0 0 Image cts rej (%) : 0.00 0.00 0.00 0.00 filtering data... Total counts : 0 0 0 0 Total cts rejected: 0 0 0 0 Total cts rej (%) : 0.00 0.00 0.00 0.00 Number of clean counts accepted : 0 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 0 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010s100602l.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS1-BRIGHT > extract events !screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS1-BRIGHT > save clean outfile=ad11502010s100602l.evt use_events=no Wrote cleaned events file to ad11502010s100602l.evt !screen:ASCA-SIS1-BRIGHT > exit save_session=no-> Deleting ad11502010s100602l.evt since it contains 0 events
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S1_PIXL0>0) ) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT LOW 25/03/97 16:49:12 0.34E+04 19842 1000 Processing file: /data/data15/seq_proc/11502010.006/ad11502010s100702l.unf EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/screen_work1001.xsl Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data15/seq_proc/11502010.006/screen_in_event.xsl reading data file: /data/data15/seq_proc/11502010.006/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 0 copy bad pix array... cleaning chip # 0 cleaning chip # 1 cleaning chip # 2 cleaning chip # 3 Number of pixels rejected : 0 Number of (internal) image counts : 0 Number of image cts rejected (N, %) : 0 0.0000000 By chip : 0 1 2 3 Pixels rejected : 0 0 0 0 Image counts : 0 0 0 0 Image cts rejected: 0 0 0 0 Image cts rej (%) : 0.00 0.00 0.00 0.00 filtering data... Total counts : 0 0 0 0 Total cts rejected: 0 0 0 0 Total cts rej (%) : 0.00 0.00 0.00 0.00 Number of clean counts accepted : 0 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 0 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010s100702l.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS1-BRIGHT > extract events !screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS1-BRIGHT > save clean outfile=ad11502010s100702l.evt use_events=no Wrote cleaned events file to ad11502010s100702l.evt !screen:ASCA-SIS1-BRIGHT > exit save_session=no-> Deleting ad11502010s100702l.evt since it contains 0 events
The sum of the selected column is 2725.6673 The mean of the selected column is 31.329510 The standard deviation of the selected column is 16.846041 The minimum of selected column is 12.500037 The maximum of selected column is 150.15669 The number of points used in calculation is 87-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S1_PIXL3>0.0 && S1_PIXL3<81.8 ) ) &&( (S1_SATF3<1) ||(S1_SATF3>1)) &&( (S1_SATF3<1) ||(S1_SATF3>1)) &&( (S1_SATF3<1) ||(S1_SATF3>1)) &&( (S1_SATF3<1) ||(S1_SATF3>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 15:32:24 0.32E+04 16373 0001 Processing file: /data/data15/seq_proc/11502010.006/ad11502010s100802h.unf EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/screen_work1001.xsl Total Good Bad: Region Time Phase Cut 10334 9513 0 821 0 0 Writing events file 9513 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 10334 9513 0 821 0 0 in 2917.91 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data15/seq_proc/11502010.006/screen_in_event.xsl reading data file: /data/data15/seq_proc/11502010.006/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 9513 copy bad pix array... cleaning chip # 0 cleaning chip # 1 cleaning chip # 2 cleaning chip # 3 Hot pixels & counts : 8 3597 Flickering pixels iter, pixels & cnts : 1 5 46 Number of pixels rejected : 13 Number of (internal) image counts : 9513 Number of image cts rejected (N, %) : 3643 38.2949638 By chip : 0 1 2 3 Pixels rejected : 0 0 0 13 Image counts : 0 0 0 9513 Image cts rejected: 0 0 0 3643 Image cts rej (%) : 0.00 0.00 0.00 38.29 filtering data... Total counts : 0 0 0 9513 Total cts rejected: 0 0 0 3643 Total cts rej (%) : 0.00 0.00 0.00 38.29 Number of clean counts accepted : 5870 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 13 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010s100802h.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS1-BRIGHT > extract events !screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS1-BRIGHT > save clean outfile=ad11502010s100802h.evt use_events=no Wrote cleaned events file to ad11502010s100802h.evt !screen:ASCA-SIS1-BRIGHT > exit save_session=no-> Filtering ad11502010s100902l.unf into ad11502010s100902l.evt
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S1_PIXL3>0) ) &&( (S1_SATF3<1) ||(S1_SATF3>1)) &&( (S1_SATF3<1) ||(S1_SATF3>1)) &&( (S1_SATF3<1) ||(S1_SATF3>1)) &&( (S1_SATF3<1) ||(S1_SATF3>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT LOW 25/03/97 15:11:04 0.22E+04 13128 0001 Processing file: /data/data15/seq_proc/11502010.006/ad11502010s100902l.unf EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/screen_work1001.xsl Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data15/seq_proc/11502010.006/screen_in_event.xsl reading data file: /data/data15/seq_proc/11502010.006/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 0 copy bad pix array... cleaning chip # 0 cleaning chip # 1 cleaning chip # 2 cleaning chip # 3 Number of pixels rejected : 0 Number of (internal) image counts : 0 Number of image cts rejected (N, %) : 0 0.0000000 By chip : 0 1 2 3 Pixels rejected : 0 0 0 0 Image counts : 0 0 0 0 Image cts rejected: 0 0 0 0 Image cts rej (%) : 0.00 0.00 0.00 0.00 filtering data... Total counts : 0 0 0 0 Total cts rejected: 0 0 0 0 Total cts rej (%) : 0.00 0.00 0.00 0.00 Number of clean counts accepted : 0 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 0 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010s100902l.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS1-BRIGHT > extract events !screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS1-BRIGHT > save clean outfile=ad11502010s100902l.evt use_events=no Wrote cleaned events file to ad11502010s100902l.evt !screen:ASCA-SIS1-BRIGHT > exit save_session=no-> Deleting ad11502010s100902l.evt since it contains 0 events
The sum of the selected column is 1510.6357 The mean of the selected column is 45.776840 The standard deviation of the selected column is 21.386966 The minimum of selected column is 3.0312338 The maximum of selected column is 108.21907 The number of points used in calculation is 33-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S1_PIXL3>0.0 && S1_PIXL3<109.9 ) ) &&( (S1_SATF3<1) ||(S1_SATF3>1)) &&( (S1_SATF3<1) ||(S1_SATF3>1)) &&( (S1_SATF3<1) ||(S1_SATF3>1)) &&( (S1_SATF3<1) ||(S1_SATF3>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 20:50:00 0.13E+04 7965 0001 Processing file: /data/data15/seq_proc/11502010.006/ad11502010s101002m.unf EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/screen_work1001.xsl Total Good Bad: Region Time Phase Cut 4333 3476 0 857 0 0 Writing events file 3476 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 4333 3476 0 857 0 0 in 1059.83 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data15/seq_proc/11502010.006/screen_in_event.xsl reading data file: /data/data15/seq_proc/11502010.006/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 3476 copy bad pix array... cleaning chip # 0 cleaning chip # 1 cleaning chip # 2 Hot pixels & counts : 0 0 Flickering pixels iter, pixels & cnts : 1 2 8 cleaning chip # 3 Hot pixels & counts : 6 1123 Flickering pixels iter, pixels & cnts : 1 3 32 Number of pixels rejected : 11 Number of (internal) image counts : 3476 Number of image cts rejected (N, %) : 1163 33.4579964 By chip : 0 1 2 3 Pixels rejected : 0 0 2 9 Image counts : 0 0 284 3192 Image cts rejected: 0 0 8 1155 Image cts rej (%) : 0.00 0.00 2.82 36.18 filtering data... Total counts : 0 0 284 3192 Total cts rejected: 0 0 8 1155 Total cts rej (%) : 0.00 0.00 2.82 36.18 Number of clean counts accepted : 2313 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 11 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010s101002m.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS1-BRIGHT > extract events !screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS1-BRIGHT > save clean outfile=ad11502010s101002m.evt use_events=no Wrote cleaned events file to ad11502010s101002m.evt !screen:ASCA-SIS1-BRIGHT > exit save_session=no-> Filtering ad11502010s101102h.unf into ad11502010s101102h.evt
The sum of the selected column is 1154.9097 The mean of the selected column is 29.613068 The standard deviation of the selected column is 9.9179171 The minimum of selected column is 15.437546 The maximum of selected column is 64.656441 The number of points used in calculation is 39-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S1_PIXL0>0.0 && S1_PIXL0<59.3 ) ) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 17:07:20 0.14E+04 6698 1000 Processing file: /data/data15/seq_proc/11502010.006/ad11502010s101102h.unf EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/screen_work1001.xsl Total Good Bad: Region Time Phase Cut 4369 3878 0 491 0 0 Writing events file 3878 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 4369 3878 0 491 0 0 in 1233.90 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data15/seq_proc/11502010.006/screen_in_event.xsl reading data file: /data/data15/seq_proc/11502010.006/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 3878 copy bad pix array... cleaning chip # 0 Hot pixels & counts : 8 1219 Flickering pixels iter, pixels & cnts : 1 12 65 cleaning chip # 1 cleaning chip # 2 cleaning chip # 3 Number of pixels rejected : 20 Number of (internal) image counts : 3878 Number of image cts rejected (N, %) : 1284 33.1098518 By chip : 0 1 2 3 Pixels rejected : 20 0 0 0 Image counts : 3878 0 0 0 Image cts rejected: 1284 0 0 0 Image cts rej (%) : 33.11 0.00 0.00 0.00 filtering data... Total counts : 3878 0 0 0 Total cts rejected: 1284 0 0 0 Total cts rej (%) : 33.11 0.00 0.00 0.00 Number of clean counts accepted : 2594 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 20 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010s101102h.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS1-BRIGHT > extract events !screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS1-BRIGHT > save clean outfile=ad11502010s101102h.evt use_events=no Wrote cleaned events file to ad11502010s101102h.evt !screen:ASCA-SIS1-BRIGHT > exit save_session=no-> Filtering ad11502010s101202l.unf into ad11502010s101202l.evt
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S1_PIXL2>0) ) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&((T_DY_NT<0)||(T_DY_NT>16)) &&((T_SAA <0)||(T_SAA >16))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT LOW 25/03/97 20:00:08 0.10E+04 5548 0010 Processing file: /data/data15/seq_proc/11502010.006/ad11502010s101202l.unf EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/screen_work1001.xsl Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data15/seq_proc/11502010.006/screen_in_event.xsl reading data file: /data/data15/seq_proc/11502010.006/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 0 copy bad pix array... cleaning chip # 0 cleaning chip # 1 cleaning chip # 2 cleaning chip # 3 Number of pixels rejected : 0 Number of (internal) image counts : 0 Number of image cts rejected (N, %) : 0 0.0000000 By chip : 0 1 2 3 Pixels rejected : 0 0 0 0 Image counts : 0 0 0 0 Image cts rejected: 0 0 0 0 Image cts rej (%) : 0.00 0.00 0.00 0.00 filtering data... Total counts : 0 0 0 0 Total cts rejected: 0 0 0 0 Total cts rej (%) : 0.00 0.00 0.00 0.00 Number of clean counts accepted : 0 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 0 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010s101202l.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS1-BRIGHT > extract events !screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS1-BRIGHT > save clean outfile=ad11502010s101202l.evt use_events=no Wrote cleaned events file to ad11502010s101202l.evt !screen:ASCA-SIS1-BRIGHT > exit save_session=no-> Deleting ad11502010s101202l.evt since it contains 0 events
(SAA==0)&& (COR>4)&& (G2_H0+G2_H2+G3_H0+G3_H2<45)&& (G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&& (RBM_CONT<100)&& (ELV>5)&& (ACS==0)&& (ANG_DIST>0)&& (ANG_DIST<0.01)&& (G2_L1>0)-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.11E+05 372884 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200170h.unf Total Good Bad: Region Time Phase Cut 372884 343549 7852 21483 0 0 Writing events file 343549 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 372884 343549 7852 21483 0 0 in 10153.96 seconds Infile # of rows Outfile # of rows # filtered ---------------- ----------------- ---------- 343549 337632 5917 Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010g200170h.unf Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4 !screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-GIS2-PH > extract events !screen:ASCA-GIS2-PH > gisclean Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits !screen:ASCA-GIS2-PH > save clean outfile=ad11502010g200170h.evt use_events=no !screen:ASCA-GIS2-PH > exit save_session=no-> Setting NEVENTS to 337632 in ad11502010g200170h.unf
(SAA==0)&& (COR>4)&& (G2_H0+G2_H2+G3_H0+G3_H2<45)&& (G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&& (RBM_CONT<100)&& (ELV>5)&& (ACS==0)&& (ANG_DIST>0)&& (ANG_DIST<0.01)&& (G2_L1>0)-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.13E+05 193211 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200270m.unf Total Good Bad: Region Time Phase Cut 193211 158393 5210 29608 0 0 Writing events file 158393 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 193211 158393 5210 29608 0 0 in 10128.23 seconds Infile # of rows Outfile # of rows # filtered ---------------- ----------------- ---------- 158393 155659 2734 Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010g200270m.unf Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4 !screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-GIS2-PH > extract events !screen:ASCA-GIS2-PH > gisclean Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits !screen:ASCA-GIS2-PH > save clean outfile=ad11502010g200270m.evt use_events=no !screen:ASCA-GIS2-PH > exit save_session=no-> Setting NEVENTS to 155659 in ad11502010g200270m.unf
(SAA==0)&& (COR>4)&& (G2_H0+G2_H2+G3_H0+G3_H2<45)&& (G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&& (RBM_CONT<100)&& (ELV>5)&& (ACS==0)&& (ANG_DIST>0)&& (ANG_DIST<0.01)&& (G2_L1>0)-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH LOW 25/03/97 15:16:34 0.83E+04 8758 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200370l.unf Total Good Bad: Region Time Phase Cut 8758 751 4978 3029 0 0 Writing events file 751 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 8758 751 4978 3029 0 0 in 191.73 seconds Infile # of rows Outfile # of rows # filtered ---------------- ----------------- ---------- 751 742 9 Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010g200370l.unf Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4 !screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-GIS2-PH > extract events !screen:ASCA-GIS2-PH > gisclean Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits !screen:ASCA-GIS2-PH > save clean outfile=ad11502010g200370l.evt use_events=no !screen:ASCA-GIS2-PH > exit save_session=no-> Setting NEVENTS to 742 in ad11502010g200370l.unf
(SAA==0)&& (COR>4)&& (G2_H0+G2_H2+G3_H0+G3_H2<45)&& (G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&& (RBM_CONT<100)&& (ELV>5)&& (ACS==0)&& (ANG_DIST>0)&& (ANG_DIST<0.01)&& (G2_L1>0)-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH LOW 25/03/97 19:42:10 0.51E+03 1067 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200470l.unf Total Good Bad: Region Time Phase Cut 1067 1 209 857 0 0 Writing events file 1 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1067 1 209 857 0 0 in 0.15 seconds Infile # of rows Outfile # of rows # filtered ---------------- ----------------- ---------- 1 1 0 Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010g200470l.unf Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4 !screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-GIS2-PH > extract events !screen:ASCA-GIS2-PH > gisclean Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits !screen:ASCA-GIS2-PH > save clean outfile=ad11502010g200470l.evt use_events=no !screen:ASCA-GIS2-PH > exit save_session=no-> Filtering ad11502010g300170h.unf into ad11502010g300170h.evt
(SAA==0)&& (COR>4)&& (G2_H0+G2_H2+G3_H0+G3_H2<45)&& (G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&& (RBM_CONT<100)&& (ELV>5)&& (ACS==0)&& (ANG_DIST>0)&& (ANG_DIST<0.01)&& (G3_L1>0)-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.11E+05 360647 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300170h.unf Total Good Bad: Region Time Phase Cut 360647 331986 6598 22063 0 0 Writing events file 331986 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 360647 331986 6598 22063 0 0 in 10163.96 seconds Infile # of rows Outfile # of rows # filtered ---------------- ----------------- ---------- 331986 327963 4023 Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010g300170h.unf Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4 !screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-GIS3-PH > extract events !screen:ASCA-GIS3-PH > gisclean Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits !screen:ASCA-GIS3-PH > save clean outfile=ad11502010g300170h.evt use_events=no !screen:ASCA-GIS3-PH > exit save_session=no-> Setting NEVENTS to 327963 in ad11502010g300170h.unf
(SAA==0)&& (COR>4)&& (G2_H0+G2_H2+G3_H0+G3_H2<45)&& (G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&& (RBM_CONT<100)&& (ELV>5)&& (ACS==0)&& (ANG_DIST>0)&& (ANG_DIST<0.01)&& (G3_L1>0)-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.13E+05 192742 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300270m.unf Total Good Bad: Region Time Phase Cut 192742 158283 4625 29834 0 0 Writing events file 158283 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 192742 158283 4625 29834 0 0 in 10128.23 seconds Infile # of rows Outfile # of rows # filtered ---------------- ----------------- ---------- 158283 156322 1961 Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010g300270m.unf Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4 !screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-GIS3-PH > extract events !screen:ASCA-GIS3-PH > gisclean Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits !screen:ASCA-GIS3-PH > save clean outfile=ad11502010g300270m.evt use_events=no !screen:ASCA-GIS3-PH > exit save_session=no-> Setting NEVENTS to 156322 in ad11502010g300270m.unf
(SAA==0)&& (COR>4)&& (G2_H0+G2_H2+G3_H0+G3_H2<45)&& (G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&& (RBM_CONT<100)&& (ELV>5)&& (ACS==0)&& (ANG_DIST>0)&& (ANG_DIST<0.01)&& (G3_L1>0)-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH LOW 25/03/97 15:16:34 0.83E+04 8371 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300370l.unf Total Good Bad: Region Time Phase Cut 8371 750 4246 3375 0 0 Writing events file 750 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 8371 750 4246 3375 0 0 in 191.73 seconds Infile # of rows Outfile # of rows # filtered ---------------- ----------------- ---------- 750 741 9 Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010g300370l.unf Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4 !screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-GIS3-PH > extract events !screen:ASCA-GIS3-PH > gisclean Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits !screen:ASCA-GIS3-PH > save clean outfile=ad11502010g300370l.evt use_events=no !screen:ASCA-GIS3-PH > exit save_session=no-> Setting NEVENTS to 741 in ad11502010g300370l.unf
(SAA==0)&& (COR>4)&& (G2_H0+G2_H2+G3_H0+G3_H2<45)&& (G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&& (RBM_CONT<100)&& (ELV>5)&& (ACS==0)&& (ANG_DIST>0)&& (ANG_DIST<0.01)&& (G3_L1>0)-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH LOW 25/03/97 19:42:10 0.51E+03 1075 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300470l.unf Total Good Bad: Region Time Phase Cut 1075 1 209 865 0 0 Writing events file 1 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1075 1 209 865 0 0 in 0.15 seconds Infile # of rows Outfile # of rows # filtered ---------------- ----------------- ---------- 1 1 0 Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !screen:ASCA > read events ad11502010g300470l.unf Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4 !screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-GIS3-PH > extract events !screen:ASCA-GIS3-PH > gisclean Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits !screen:ASCA-GIS3-PH > save clean outfile=ad11502010g300470l.evt use_events=no !screen:ASCA-GIS3-PH > exit save_session=no
-ANNULUS(128.5,128.5,192,88) -ELLIPSE(167.5,220,24.66,28.95,245.298)-> gis2_ano_on_flf_180295.fits already present in current directory
ASCAEXPO_V0.9b reading data file: ad11502010g200170h.evt reading gti ext: STDGTI reading cal file: gis2_ano_on_flf_180295.fits reading inst file: GIS2_REGION256.4_regionmap.tmp making an inst map... multiply inst map... reading att file: ./fa970325_1338.0040 making an exposure map... Aspect RA/DEC/ROLL : 254.4330 35.3094 278.6170 Mean RA/DEC/ROLL : 254.4326 35.2814 278.6170 Pnt RA/DEC/ROLL : 254.3266 35.3625 278.6170 Image rebin factor : 1 Attitude Records : 25893 GTI intervals : 19 Total GTI (secs) : 10153.957 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 1247.9909668 1247.9909668 20 Percent Complete: Total/live time: 2517.9873047 2517.9873047 30 Percent Complete: Total/live time: 3319.4848633 3319.4848633 40 Percent Complete: Total/live time: 4795.9731445 4795.9731445 50 Percent Complete: Total/live time: 5677.9707031 5677.9707031 60 Percent Complete: Total/live time: 7142.4663086 7142.4663086 70 Percent Complete: Total/live time: 7597.9648438 7597.9648438 80 Percent Complete: Total/live time: 8881.9609375 8881.9609375 90 Percent Complete: Total/live time: 9574.4589844 9574.4589844 100 Percent Complete: Total/live time: 10153.9570312 10153.9570312 Number of attitude steps used: 35 Number of attitude steps avail: 21153 Mean RA/DEC pixel offset: -12.7927 -2.7532 writing expo file: ad11502010g200170h.expo closing attitude file... closing data file...-> Generating low and high energy images for ad11502010g200170h.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad11502010g200170h Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.10E+05 337632 1024 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200170h.evt Total Good Bad: Region Time Phase Cut 337632 337501 131 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 337632 337501 131 0 0 0 in 10153.96 seconds Image has 337501 counts for 33.24 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200170h.evt Total Good Bad: Region Time Phase Cut 337632 119078 131 0 0 218423 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 337632 119078 131 0 0 218423 in 10153.96 seconds Image has 119078 counts for 11.73 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200170h.evt Total Good Bad: Region Time Phase Cut 337632 219485 131 0 0 118016 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 337632 219485 131 0 0 118016 in 10153.96 seconds Image has 219485 counts for 21.62 counts/sec Command not found; type ? for a command listing !ad11502010g200170h:ASCA > !ad11502010g200170h:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad11502010g200170h:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !ad11502010g200170h:ASCA > read events ad11502010g200170h.evt Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !ad11502010g200170h:ASCA-GIS2-PH > set image sky !ad11502010g200170h:ASCA-GIS2-PH > filter region corner_point.reg !ad11502010g200170h:ASCA-GIS2-PH > extract image !ad11502010g200170h:ASCA-GIS2-PH > save image outfile=ad11502010g200170h.img Wrote image to file ad11502010g200170h.img !ad11502010g200170h:ASCA-GIS2-PH > filter pha_cut 0 170 !ad11502010g200170h:ASCA-GIS2-PH > extract image !ad11502010g200170h:ASCA-GIS2-PH > save image outfile=ad11502010g200170h_lo.img Wrote image to file ad11502010g200170h_lo.img !ad11502010g200170h:ASCA-GIS2-PH > clear pha_cut !ad11502010g200170h:ASCA-GIS2-PH > filter pha_cut 170 1024 Warning: your PI upper bound: 1024 is above the maximum value. !ad11502010g200170h:ASCA-GIS2-PH > extract image !ad11502010g200170h:ASCA-GIS2-PH > save image outfile=ad11502010g200170h_hi.img Wrote image to file ad11502010g200170h_hi.img !ad11502010g200170h:ASCA-GIS2-PH > exit save_session=no-> Generating exposure map ad11502010g200270m.expo
ASCAEXPO_V0.9b reading data file: ad11502010g200270m.evt reading gti ext: STDGTI reading cal file: gis2_ano_on_flf_180295.fits reading inst file: GIS2_REGION256.4_regionmap.tmp making an inst map... multiply inst map... reading att file: ./fa970325_1338.0040 making an exposure map... Aspect RA/DEC/ROLL : 254.4330 35.3094 278.6192 Mean RA/DEC/ROLL : 254.4331 35.2808 278.6192 Pnt RA/DEC/ROLL : 254.3256 35.3499 278.6192 Image rebin factor : 1 Attitude Records : 25893 GTI intervals : 9 Total GTI (secs) : 10128.228 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 1616.9951172 1616.9951172 20 Percent Complete: Total/live time: 2928.0383301 2928.0383301 30 Percent Complete: Total/live time: 4528.0336914 4528.0336914 40 Percent Complete: Total/live time: 4528.0336914 4528.0336914 50 Percent Complete: Total/live time: 5537.0292969 5537.0292969 60 Percent Complete: Total/live time: 6368.0268555 6368.0268555 70 Percent Complete: Total/live time: 7717.1206055 7717.1206055 80 Percent Complete: Total/live time: 8749.1171875 8749.1171875 90 Percent Complete: Total/live time: 10128.2275391 10128.2275391 100 Percent Complete: Total/live time: 10128.2275391 10128.2275391 Number of attitude steps used: 17 Number of attitude steps avail: 3910 Mean RA/DEC pixel offset: -12.4645 -2.9443 writing expo file: ad11502010g200270m.expo closing attitude file... closing data file...-> Generating low and high energy images for ad11502010g200270m.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad11502010g200270m Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.10E+05 155659 1024 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200270m.evt Total Good Bad: Region Time Phase Cut 155659 155588 71 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 155659 155588 71 0 0 0 in 10128.23 seconds Image has 155588 counts for 15.36 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200270m.evt Total Good Bad: Region Time Phase Cut 155659 57959 71 0 0 97629 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 155659 57959 71 0 0 97629 in 10128.23 seconds Image has 57959 counts for 5.723 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200270m.evt Total Good Bad: Region Time Phase Cut 155659 98098 71 0 0 57490 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 155659 98098 71 0 0 57490 in 10128.23 seconds Image has 98098 counts for 9.686 counts/sec Command not found; type ? for a command listing !ad11502010g200270m:ASCA > !ad11502010g200270m:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad11502010g200270m:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !ad11502010g200270m:ASCA > read events ad11502010g200270m.evt Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !ad11502010g200270m:ASCA-GIS2-PH > set image sky !ad11502010g200270m:ASCA-GIS2-PH > filter region corner_point.reg !ad11502010g200270m:ASCA-GIS2-PH > extract image !ad11502010g200270m:ASCA-GIS2-PH > save image outfile=ad11502010g200270m.img Wrote image to file ad11502010g200270m.img !ad11502010g200270m:ASCA-GIS2-PH > filter pha_cut 0 170 !ad11502010g200270m:ASCA-GIS2-PH > extract image !ad11502010g200270m:ASCA-GIS2-PH > save image outfile=ad11502010g200270m_lo.img Wrote image to file ad11502010g200270m_lo.img !ad11502010g200270m:ASCA-GIS2-PH > clear pha_cut !ad11502010g200270m:ASCA-GIS2-PH > filter pha_cut 170 1024 Warning: your PI upper bound: 1024 is above the maximum value. !ad11502010g200270m:ASCA-GIS2-PH > extract image !ad11502010g200270m:ASCA-GIS2-PH > save image outfile=ad11502010g200270m_hi.img Wrote image to file ad11502010g200270m_hi.img !ad11502010g200270m:ASCA-GIS2-PH > exit save_session=no-> Generating exposure map ad11502010g200370l.expo
ASCAEXPO_V0.9b reading data file: ad11502010g200370l.evt reading gti ext: STDGTI reading cal file: gis2_ano_on_flf_180295.fits reading inst file: GIS2_REGION256.4_regionmap.tmp making an inst map... multiply inst map... reading att file: ./fa970325_1338.0040 making an exposure map... Aspect RA/DEC/ROLL : 254.4330 35.3094 278.6136 Mean RA/DEC/ROLL : 254.4292 35.2817 278.6136 Pnt RA/DEC/ROLL : 254.4413 35.3306 278.6136 Image rebin factor : 1 Attitude Records : 25893 GTI intervals : 4 Total GTI (secs) : 191.732 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 44.9797821 44.9797821 20 Percent Complete: Total/live time: 44.9797821 44.9797821 30 Percent Complete: Total/live time: 60.9797363 60.9797363 40 Percent Complete: Total/live time: 95.9257812 95.9257812 50 Percent Complete: Total/live time: 159.8372650 159.8372650 60 Percent Complete: Total/live time: 159.8372650 159.8372650 70 Percent Complete: Total/live time: 191.7317810 191.7317810 100 Percent Complete: Total/live time: 191.7317810 191.7317810 Number of attitude steps used: 8 Number of attitude steps avail: 2865 Mean RA/DEC pixel offset: -11.2563 -3.2162 writing expo file: ad11502010g200370l.expo closing attitude file... closing data file...-> Generating low and high energy images for ad11502010g200370l.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad11502010g200370l Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH LOW 25/03/97 15:16:34 0.19E+03 742 1024 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200370l.evt Total Good Bad: Region Time Phase Cut 742 742 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 742 742 0 0 0 0 in 191.73 seconds Image has 742 counts for 3.870 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200370l.evt Total Good Bad: Region Time Phase Cut 742 282 0 0 0 460 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 742 282 0 0 0 460 in 191.73 seconds Image has 282 counts for 1.471 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200370l.evt Total Good Bad: Region Time Phase Cut 742 462 0 0 0 280 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 742 462 0 0 0 280 in 191.73 seconds Image has 462 counts for 2.410 counts/sec Command not found; type ? for a command listing !ad11502010g200370l:ASCA > !ad11502010g200370l:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad11502010g200370l:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !ad11502010g200370l:ASCA > read events ad11502010g200370l.evt Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !ad11502010g200370l:ASCA-GIS2-PH > set image sky !ad11502010g200370l:ASCA-GIS2-PH > filter region corner_point.reg !ad11502010g200370l:ASCA-GIS2-PH > extract image !ad11502010g200370l:ASCA-GIS2-PH > save image outfile=ad11502010g200370l.img Wrote image to file ad11502010g200370l.img !ad11502010g200370l:ASCA-GIS2-PH > filter pha_cut 0 170 !ad11502010g200370l:ASCA-GIS2-PH > extract image !ad11502010g200370l:ASCA-GIS2-PH > save image outfile=ad11502010g200370l_lo.img Wrote image to file ad11502010g200370l_lo.img !ad11502010g200370l:ASCA-GIS2-PH > clear pha_cut !ad11502010g200370l:ASCA-GIS2-PH > filter pha_cut 170 1024 Warning: your PI upper bound: 1024 is above the maximum value. !ad11502010g200370l:ASCA-GIS2-PH > extract image !ad11502010g200370l:ASCA-GIS2-PH > save image outfile=ad11502010g200370l_hi.img Wrote image to file ad11502010g200370l_hi.img !ad11502010g200370l:ASCA-GIS2-PH > exit save_session=no-> Generating exposure map ad11502010g200470l.expo
ASCAEXPO_V0.9b reading data file: ad11502010g200470l.evt reading gti ext: STDGTI reading cal file: gis2_ano_on_flf_180295.fits reading inst file: GIS2_REGION256.4_regionmap.tmp making an inst map... multiply inst map... reading att file: ./fa970325_1338.0040 making an exposure map... Aspect RA/DEC/ROLL : 254.4330 35.3094 278.6156 Mean RA/DEC/ROLL : 254.4306 35.2814 278.6156 Pnt RA/DEC/ROLL : 254.4384 35.3327 278.6156 Image rebin factor : 1 Attitude Records : 25893 GTI intervals : 2 Total GTI (secs) : 0.147 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 0.0648682 0.0648682 20 Percent Complete: Total/live time: 0.1468985 0.1468985 100 Percent Complete: Total/live time: 0.1468985 0.1468985 Number of attitude steps used: 2 Number of attitude steps avail: 4 Mean RA/DEC pixel offset: -6.6849 -1.5644 writing expo file: ad11502010g200470l.expo closing attitude file... closing data file...-> Generating low and high energy images for ad11502010g200470l.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad11502010g200470l Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH LOW 25/03/97 19:42:10 0.15E+00 1 1024 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200470l.evt Total Good Bad: Region Time Phase Cut 1 1 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1 1 0 0 0 0 in 0.15 seconds Image has 1 counts for 6.807 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200470l.evt Total Good Bad: Region Time Phase Cut 1 0 0 0 0 1 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1 0 0 0 0 1 in 0.15 seconds Image has 0 counts for 0. counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200470l.evt Total Good Bad: Region Time Phase Cut 1 1 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1 1 0 0 0 0 in 0.15 seconds Image has 1 counts for 6.807 counts/sec Command not found; type ? for a command listing !ad11502010g200470l:ASCA > !ad11502010g200470l:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad11502010g200470l:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !ad11502010g200470l:ASCA > read events ad11502010g200470l.evt Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !ad11502010g200470l:ASCA-GIS2-PH > set image sky !ad11502010g200470l:ASCA-GIS2-PH > filter region corner_point.reg !ad11502010g200470l:ASCA-GIS2-PH > extract image !ad11502010g200470l:ASCA-GIS2-PH > save image outfile=ad11502010g200470l.img Wrote image to file ad11502010g200470l.img !ad11502010g200470l:ASCA-GIS2-PH > filter pha_cut 0 170 !ad11502010g200470l:ASCA-GIS2-PH > extract image !ad11502010g200470l:ASCA-GIS2-PH > save image outfile=ad11502010g200470l_lo.img Wrote image to file ad11502010g200470l_lo.img !ad11502010g200470l:ASCA-GIS2-PH > clear pha_cut !ad11502010g200470l:ASCA-GIS2-PH > filter pha_cut 170 1024 Warning: your PI upper bound: 1024 is above the maximum value. !ad11502010g200470l:ASCA-GIS2-PH > extract image !ad11502010g200470l:ASCA-GIS2-PH > save image outfile=ad11502010g200470l_hi.img Wrote image to file ad11502010g200470l_hi.img !ad11502010g200470l:ASCA-GIS2-PH > exit save_session=no-> Generating exposure map ad11502010g300170h.expo
-ANNULUS(128.5,128.5,192,88) -ELLIPSE(217,95,21.56,25.92,169.216)-> gis3_ano_on_flf_180295.fits already present in current directory
ASCAEXPO_V0.9b reading data file: ad11502010g300170h.evt reading gti ext: STDGTI reading cal file: gis3_ano_on_flf_180295.fits reading inst file: GIS3_REGION256.4_regionmap.tmp making an inst map... multiply inst map... reading att file: ./fa970325_1338.0040 making an exposure map... Aspect RA/DEC/ROLL : 254.4330 35.3094 278.6162 Mean RA/DEC/ROLL : 254.4313 35.3061 278.6162 Pnt RA/DEC/ROLL : 254.3283 35.3377 278.6162 Image rebin factor : 1 Attitude Records : 25893 GTI intervals : 23 Total GTI (secs) : 10163.957 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 1247.9909668 1247.9909668 20 Percent Complete: Total/live time: 2517.9873047 2517.9873047 30 Percent Complete: Total/live time: 3319.4848633 3319.4848633 40 Percent Complete: Total/live time: 4795.9731445 4795.9731445 50 Percent Complete: Total/live time: 5677.9707031 5677.9707031 60 Percent Complete: Total/live time: 7142.4663086 7142.4663086 70 Percent Complete: Total/live time: 7597.9648438 7597.9648438 80 Percent Complete: Total/live time: 8891.9609375 8891.9609375 90 Percent Complete: Total/live time: 9584.4589844 9584.4589844 100 Percent Complete: Total/live time: 10163.9570312 10163.9570312 Number of attitude steps used: 35 Number of attitude steps avail: 21150 Mean RA/DEC pixel offset: -1.0588 -1.5881 writing expo file: ad11502010g300170h.expo closing attitude file... closing data file...-> Generating low and high energy images for ad11502010g300170h.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad11502010g300170h Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.10E+05 327963 1024 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300170h.evt Total Good Bad: Region Time Phase Cut 327963 327819 144 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 327963 327819 144 0 0 0 in 10163.96 seconds Image has 327819 counts for 32.25 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300170h.evt Total Good Bad: Region Time Phase Cut 327963 118382 144 0 0 209437 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 327963 118382 144 0 0 209437 in 10163.96 seconds Image has 118382 counts for 11.65 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300170h.evt Total Good Bad: Region Time Phase Cut 327963 210428 144 0 0 117391 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 327963 210428 144 0 0 117391 in 10163.96 seconds Image has 210428 counts for 20.70 counts/sec Command not found; type ? for a command listing !ad11502010g300170h:ASCA > !ad11502010g300170h:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad11502010g300170h:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !ad11502010g300170h:ASCA > read events ad11502010g300170h.evt Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !ad11502010g300170h:ASCA-GIS3-PH > set image sky !ad11502010g300170h:ASCA-GIS3-PH > filter region corner_point.reg !ad11502010g300170h:ASCA-GIS3-PH > extract image !ad11502010g300170h:ASCA-GIS3-PH > save image outfile=ad11502010g300170h.img Wrote image to file ad11502010g300170h.img !ad11502010g300170h:ASCA-GIS3-PH > filter pha_cut 0 170 !ad11502010g300170h:ASCA-GIS3-PH > extract image !ad11502010g300170h:ASCA-GIS3-PH > save image outfile=ad11502010g300170h_lo.img Wrote image to file ad11502010g300170h_lo.img !ad11502010g300170h:ASCA-GIS3-PH > clear pha_cut !ad11502010g300170h:ASCA-GIS3-PH > filter pha_cut 170 1024 Warning: your PI upper bound: 1024 is above the maximum value. !ad11502010g300170h:ASCA-GIS3-PH > extract image !ad11502010g300170h:ASCA-GIS3-PH > save image outfile=ad11502010g300170h_hi.img Wrote image to file ad11502010g300170h_hi.img !ad11502010g300170h:ASCA-GIS3-PH > exit save_session=no-> Generating exposure map ad11502010g300270m.expo
ASCAEXPO_V0.9b reading data file: ad11502010g300270m.evt reading gti ext: STDGTI reading cal file: gis3_ano_on_flf_180295.fits reading inst file: GIS3_REGION256.4_regionmap.tmp making an inst map... multiply inst map... reading att file: ./fa970325_1338.0040 making an exposure map... Aspect RA/DEC/ROLL : 254.4330 35.3094 278.6184 Mean RA/DEC/ROLL : 254.4317 35.3056 278.6184 Pnt RA/DEC/ROLL : 254.3273 35.3251 278.6184 Image rebin factor : 1 Attitude Records : 25893 GTI intervals : 9 Total GTI (secs) : 10128.228 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 1616.9951172 1616.9951172 20 Percent Complete: Total/live time: 2928.0383301 2928.0383301 30 Percent Complete: Total/live time: 4528.0336914 4528.0336914 40 Percent Complete: Total/live time: 4528.0336914 4528.0336914 50 Percent Complete: Total/live time: 5537.0292969 5537.0292969 60 Percent Complete: Total/live time: 6368.0268555 6368.0268555 70 Percent Complete: Total/live time: 7717.1206055 7717.1206055 80 Percent Complete: Total/live time: 8749.1171875 8749.1171875 90 Percent Complete: Total/live time: 10128.2275391 10128.2275391 100 Percent Complete: Total/live time: 10128.2275391 10128.2275391 Number of attitude steps used: 17 Number of attitude steps avail: 3910 Mean RA/DEC pixel offset: -1.0964 -1.8150 writing expo file: ad11502010g300270m.expo closing attitude file... closing data file...-> Generating low and high energy images for ad11502010g300270m.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad11502010g300270m Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.10E+05 156322 1024 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300270m.evt Total Good Bad: Region Time Phase Cut 156322 156238 84 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 156322 156238 84 0 0 0 in 10128.23 seconds Image has 156238 counts for 15.43 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300270m.evt Total Good Bad: Region Time Phase Cut 156322 58546 84 0 0 97692 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 156322 58546 84 0 0 97692 in 10128.23 seconds Image has 58546 counts for 5.780 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300270m.evt Total Good Bad: Region Time Phase Cut 156322 98104 84 0 0 58134 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 156322 98104 84 0 0 58134 in 10128.23 seconds Image has 98104 counts for 9.686 counts/sec Command not found; type ? for a command listing !ad11502010g300270m:ASCA > !ad11502010g300270m:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad11502010g300270m:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !ad11502010g300270m:ASCA > read events ad11502010g300270m.evt Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !ad11502010g300270m:ASCA-GIS3-PH > set image sky !ad11502010g300270m:ASCA-GIS3-PH > filter region corner_point.reg !ad11502010g300270m:ASCA-GIS3-PH > extract image !ad11502010g300270m:ASCA-GIS3-PH > save image outfile=ad11502010g300270m.img Wrote image to file ad11502010g300270m.img !ad11502010g300270m:ASCA-GIS3-PH > filter pha_cut 0 170 !ad11502010g300270m:ASCA-GIS3-PH > extract image !ad11502010g300270m:ASCA-GIS3-PH > save image outfile=ad11502010g300270m_lo.img Wrote image to file ad11502010g300270m_lo.img !ad11502010g300270m:ASCA-GIS3-PH > clear pha_cut !ad11502010g300270m:ASCA-GIS3-PH > filter pha_cut 170 1024 Warning: your PI upper bound: 1024 is above the maximum value. !ad11502010g300270m:ASCA-GIS3-PH > extract image !ad11502010g300270m:ASCA-GIS3-PH > save image outfile=ad11502010g300270m_hi.img Wrote image to file ad11502010g300270m_hi.img !ad11502010g300270m:ASCA-GIS3-PH > exit save_session=no-> Generating exposure map ad11502010g300370l.expo
ASCAEXPO_V0.9b reading data file: ad11502010g300370l.evt reading gti ext: STDGTI reading cal file: gis3_ano_on_flf_180295.fits reading inst file: GIS3_REGION256.4_regionmap.tmp making an inst map... multiply inst map... reading att file: ./fa970325_1338.0040 making an exposure map... Aspect RA/DEC/ROLL : 254.4330 35.3094 278.6127 Mean RA/DEC/ROLL : 254.4277 35.3063 278.6127 Pnt RA/DEC/ROLL : 254.4428 35.3058 278.6127 Image rebin factor : 1 Attitude Records : 25893 GTI intervals : 4 Total GTI (secs) : 191.732 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 44.9797821 44.9797821 20 Percent Complete: Total/live time: 44.9797821 44.9797821 30 Percent Complete: Total/live time: 60.9797363 60.9797363 40 Percent Complete: Total/live time: 95.9257812 95.9257812 50 Percent Complete: Total/live time: 159.8372650 159.8372650 60 Percent Complete: Total/live time: 159.8372650 159.8372650 70 Percent Complete: Total/live time: 191.7317810 191.7317810 100 Percent Complete: Total/live time: 191.7317810 191.7317810 Number of attitude steps used: 8 Number of attitude steps avail: 2865 Mean RA/DEC pixel offset: -0.6875 -2.1663 writing expo file: ad11502010g300370l.expo closing attitude file... closing data file...-> Generating low and high energy images for ad11502010g300370l.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad11502010g300370l Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH LOW 25/03/97 15:16:34 0.19E+03 741 1024 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300370l.evt Total Good Bad: Region Time Phase Cut 741 741 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 741 741 0 0 0 0 in 191.73 seconds Image has 741 counts for 3.865 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300370l.evt Total Good Bad: Region Time Phase Cut 741 265 0 0 0 476 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 741 265 0 0 0 476 in 191.73 seconds Image has 265 counts for 1.382 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300370l.evt Total Good Bad: Region Time Phase Cut 741 477 0 0 0 264 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 741 477 0 0 0 264 in 191.73 seconds Image has 477 counts for 2.488 counts/sec Command not found; type ? for a command listing !ad11502010g300370l:ASCA > !ad11502010g300370l:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad11502010g300370l:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !ad11502010g300370l:ASCA > read events ad11502010g300370l.evt Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !ad11502010g300370l:ASCA-GIS3-PH > set image sky !ad11502010g300370l:ASCA-GIS3-PH > filter region corner_point.reg !ad11502010g300370l:ASCA-GIS3-PH > extract image !ad11502010g300370l:ASCA-GIS3-PH > save image outfile=ad11502010g300370l.img Wrote image to file ad11502010g300370l.img !ad11502010g300370l:ASCA-GIS3-PH > filter pha_cut 0 170 !ad11502010g300370l:ASCA-GIS3-PH > extract image !ad11502010g300370l:ASCA-GIS3-PH > save image outfile=ad11502010g300370l_lo.img Wrote image to file ad11502010g300370l_lo.img !ad11502010g300370l:ASCA-GIS3-PH > clear pha_cut !ad11502010g300370l:ASCA-GIS3-PH > filter pha_cut 170 1024 Warning: your PI upper bound: 1024 is above the maximum value. !ad11502010g300370l:ASCA-GIS3-PH > extract image !ad11502010g300370l:ASCA-GIS3-PH > save image outfile=ad11502010g300370l_hi.img Wrote image to file ad11502010g300370l_hi.img !ad11502010g300370l:ASCA-GIS3-PH > exit save_session=no-> Generating exposure map ad11502010g300470l.expo
ASCAEXPO_V0.9b reading data file: ad11502010g300470l.evt reading gti ext: STDGTI reading cal file: gis3_ano_on_flf_180295.fits reading inst file: GIS3_REGION256.4_regionmap.tmp making an inst map... multiply inst map... reading att file: ./fa970325_1338.0040 making an exposure map... Aspect RA/DEC/ROLL : 254.4330 35.3094 278.6147 Mean RA/DEC/ROLL : 254.4290 35.3062 278.6147 Pnt RA/DEC/ROLL : 254.4400 35.3078 278.6147 Image rebin factor : 1 Attitude Records : 25893 GTI intervals : 2 Total GTI (secs) : 0.147 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 0.0648682 0.0648682 20 Percent Complete: Total/live time: 0.1468985 0.1468985 100 Percent Complete: Total/live time: 0.1468985 0.1468985 Number of attitude steps used: 2 Number of attitude steps avail: 4 Mean RA/DEC pixel offset: -0.6456 -0.9645 writing expo file: ad11502010g300470l.expo closing attitude file... closing data file...-> Generating low and high energy images for ad11502010g300470l.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad11502010g300470l Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH LOW 25/03/97 19:42:10 0.15E+00 1 1024 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300470l.evt Total Good Bad: Region Time Phase Cut 1 1 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1 1 0 0 0 0 in 0.15 seconds Image has 1 counts for 6.807 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300470l.evt Total Good Bad: Region Time Phase Cut 1 0 0 0 0 1 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1 0 0 0 0 1 in 0.15 seconds Image has 0 counts for 0. counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300470l.evt Total Good Bad: Region Time Phase Cut 1 1 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1 1 0 0 0 0 in 0.15 seconds Image has 1 counts for 6.807 counts/sec Command not found; type ? for a command listing !ad11502010g300470l:ASCA > !ad11502010g300470l:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad11502010g300470l:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !ad11502010g300470l:ASCA > read events ad11502010g300470l.evt Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !ad11502010g300470l:ASCA-GIS3-PH > set image sky !ad11502010g300470l:ASCA-GIS3-PH > filter region corner_point.reg !ad11502010g300470l:ASCA-GIS3-PH > extract image !ad11502010g300470l:ASCA-GIS3-PH > save image outfile=ad11502010g300470l.img Wrote image to file ad11502010g300470l.img !ad11502010g300470l:ASCA-GIS3-PH > filter pha_cut 0 170 !ad11502010g300470l:ASCA-GIS3-PH > extract image !ad11502010g300470l:ASCA-GIS3-PH > save image outfile=ad11502010g300470l_lo.img Wrote image to file ad11502010g300470l_lo.img !ad11502010g300470l:ASCA-GIS3-PH > clear pha_cut !ad11502010g300470l:ASCA-GIS3-PH > filter pha_cut 170 1024 Warning: your PI upper bound: 1024 is above the maximum value. !ad11502010g300470l:ASCA-GIS3-PH > extract image !ad11502010g300470l:ASCA-GIS3-PH > save image outfile=ad11502010g300470l_hi.img Wrote image to file ad11502010g300470l_hi.img !ad11502010g300470l:ASCA-GIS3-PH > exit save_session=no-> Generating exposure map ad11502010s000102h.expo
ASCAEXPO_V0.9b reading data file: ad11502010s000102h.evt reading gti ext: STDGTI reading hp ext: HOT_PIXELS reading cal file: s0_teldef_ascalin.fits making an inst map... SIS AREA DISC ENABL OFF CHIP: 0 1 2 3 CCD POWER ON/OFF: OFF OFF OFF ON AREA DISC IN/OUT: OUT OUT IN IN AREA DISC H START: 6 6 6 316 AREA DISC H STOP: 425 67 200 425 AREA DISC V START: 2 2 2 2 AREA DISC V STOP: 422 422 150 112 reading att file: ./fa970325_1338.0040 making an exposure map... Aspect RA/DEC/ROLL : 254.4330 35.3094 278.6038 Mean RA/DEC/ROLL : 254.4114 35.2916 278.6038 Pnt RA/DEC/ROLL : 254.4589 35.3223 278.6038 Image rebin factor : 4 Attitude Records : 25893 Hot Pixels : 4 GTI intervals : 5 Total GTI (secs) : 3775.720 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 1400.4412842 1400.4412842 20 Percent Complete: Total/live time: 1400.4412842 1400.4412842 30 Percent Complete: Total/live time: 1404.9412842 1404.9412842 40 Percent Complete: Total/live time: 1811.9086914 1811.9086914 50 Percent Complete: Total/live time: 2516.7553711 2516.7553711 60 Percent Complete: Total/live time: 2516.7553711 2516.7553711 70 Percent Complete: Total/live time: 3207.7534180 3207.7534180 80 Percent Complete: Total/live time: 3207.7534180 3207.7534180 90 Percent Complete: Total/live time: 3775.7204590 3775.7204590 100 Percent Complete: Total/live time: 3775.7204590 3775.7204590 Number of attitude steps used: 9 Number of attitude steps avail: 7911 Mean RA/DEC pixel offset: -58.8266 -82.8836 writing expo file: ad11502010s000102h.expo closing attitude file... closing data file...-> Generating low and high energy images for ad11502010s000102h.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad11502010s000102h Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.38E+04 77323 0001 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000102h.evt Total Good Bad: Region Time Phase Cut 77323 77323 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 77323 77323 0 0 0 0 in 3775.72 seconds Image has 77323 counts for 20.48 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000102h.evt Total Good Bad: Region Time Phase Cut 77323 41877 0 0 0 35446 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 77323 41877 0 0 0 35446 in 3775.72 seconds Image has 41877 counts for 11.09 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000102h.evt Total Good Bad: Region Time Phase Cut 77323 35494 0 0 0 41829 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 77323 35494 0 0 0 41829 in 3775.72 seconds Image has 35494 counts for 9.401 counts/sec Command not found; type ? for a command listing !ad11502010s000102h:ASCA > !ad11502010s000102h:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad11502010s000102h:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !ad11502010s000102h:ASCA > read events ad11502010s000102h.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !ad11502010s000102h:ASCA-SIS0-BRIGHT > set image sky !ad11502010s000102h:ASCA-SIS0-BRIGHT > filter region corner_point.reg !ad11502010s000102h:ASCA-SIS0-BRIGHT > extract image !ad11502010s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad11502010s000102h.img Wrote image to file ad11502010s000102h.img !ad11502010s000102h:ASCA-SIS0-BRIGHT > filter pha_cut 0 547 !ad11502010s000102h:ASCA-SIS0-BRIGHT > extract image !ad11502010s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad11502010s000102h_lo.img Wrote image to file ad11502010s000102h_lo.img !ad11502010s000102h:ASCA-SIS0-BRIGHT > clear pha_cut !ad11502010s000102h:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048 Warning: your PI upper bound: 2048 is above the maximum value. !ad11502010s000102h:ASCA-SIS0-BRIGHT > extract image !ad11502010s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad11502010s000102h_hi.img Wrote image to file ad11502010s000102h_hi.img !ad11502010s000102h:ASCA-SIS0-BRIGHT > exit save_session=no-> Generating exposure map ad11502010s000202m.expo
ASCAEXPO_V0.9b reading data file: ad11502010s000202m.evt reading gti ext: STDGTI reading hp ext: HOT_PIXELS reading cal file: s0_teldef_ascalin.fits making an inst map... SIS AREA DISC ENABL OFF CHIP: 0 1 2 3 CCD POWER ON/OFF: OFF OFF OFF ON AREA DISC IN/OUT: OUT OUT IN IN AREA DISC H START: 6 6 6 316 AREA DISC H STOP: 425 67 200 425 AREA DISC V START: 2 2 2 2 AREA DISC V STOP: 422 422 150 112 reading att file: ./fa970325_1338.0040 making an exposure map... Aspect RA/DEC/ROLL : 254.4330 35.3094 278.6043 Mean RA/DEC/ROLL : 254.4109 35.2915 278.6043 Pnt RA/DEC/ROLL : 254.4584 35.3222 278.6043 Image rebin factor : 4 Attitude Records : 25893 Hot Pixels : 8 GTI intervals : 5 Total GTI (secs) : 2132.155 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 1258.0600586 1258.0600586 20 Percent Complete: Total/live time: 1258.0600586 1258.0600586 30 Percent Complete: Total/live time: 2132.1547852 2132.1547852 100 Percent Complete: Total/live time: 2132.1547852 2132.1547852 Number of attitude steps used: 3 Number of attitude steps avail: 852 Mean RA/DEC pixel offset: -45.6457 -61.4598 writing expo file: ad11502010s000202m.expo closing attitude file... closing data file...-> Generating low and high energy images for ad11502010s000202m.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad11502010s000202m Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 19:15:20 0.21E+04 42154 0001 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000202m.evt Total Good Bad: Region Time Phase Cut 42154 42154 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 42154 42154 0 0 0 0 in 2132.15 seconds Image has 42154 counts for 19.77 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000202m.evt Total Good Bad: Region Time Phase Cut 42154 22678 0 0 0 19476 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 42154 22678 0 0 0 19476 in 2132.15 seconds Image has 22678 counts for 10.64 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000202m.evt Total Good Bad: Region Time Phase Cut 42154 19506 0 0 0 22648 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 42154 19506 0 0 0 22648 in 2132.15 seconds Image has 19506 counts for 9.148 counts/sec Command not found; type ? for a command listing !ad11502010s000202m:ASCA > !ad11502010s000202m:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad11502010s000202m:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !ad11502010s000202m:ASCA > read events ad11502010s000202m.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !ad11502010s000202m:ASCA-SIS0-BRIGHT > set image sky !ad11502010s000202m:ASCA-SIS0-BRIGHT > filter region corner_point.reg !ad11502010s000202m:ASCA-SIS0-BRIGHT > extract image !ad11502010s000202m:ASCA-SIS0-BRIGHT > save image outfile=ad11502010s000202m.img Wrote image to file ad11502010s000202m.img !ad11502010s000202m:ASCA-SIS0-BRIGHT > filter pha_cut 0 547 !ad11502010s000202m:ASCA-SIS0-BRIGHT > extract image !ad11502010s000202m:ASCA-SIS0-BRIGHT > save image outfile=ad11502010s000202m_lo.img Wrote image to file ad11502010s000202m_lo.img !ad11502010s000202m:ASCA-SIS0-BRIGHT > clear pha_cut !ad11502010s000202m:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048 Warning: your PI upper bound: 2048 is above the maximum value. !ad11502010s000202m:ASCA-SIS0-BRIGHT > extract image !ad11502010s000202m:ASCA-SIS0-BRIGHT > save image outfile=ad11502010s000202m_hi.img Wrote image to file ad11502010s000202m_hi.img !ad11502010s000202m:ASCA-SIS0-BRIGHT > exit save_session=no-> Generating exposure map ad11502010s000302m.expo
ASCAEXPO_V0.9b reading data file: ad11502010s000302m.evt reading gti ext: STDGTI reading hp ext: HOT_PIXELS reading cal file: s0_teldef_ascalin.fits making an inst map... SIS AREA DISC ENABL OFF CHIP: 0 1 2 3 CCD POWER ON/OFF: ON OFF OFF OFF AREA DISC IN/OUT: OUT OUT IN IN AREA DISC H START: 6 6 6 316 AREA DISC H STOP: 425 67 200 425 AREA DISC V START: 2 2 2 2 AREA DISC V STOP: 422 422 150 112 reading att file: ./fa970325_1338.0040 making an exposure map... Aspect RA/DEC/ROLL : 254.4330 35.3094 278.6092 Mean RA/DEC/ROLL : 254.4670 35.2777 278.6092 Pnt RA/DEC/ROLL : 254.3450 35.3401 278.6092 Image rebin factor : 4 Attitude Records : 25893 Hot Pixels : 28 GTI intervals : 5 Total GTI (secs) : 1669.245 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 1085.7465820 1085.7465820 20 Percent Complete: Total/live time: 1085.7465820 1085.7465820 30 Percent Complete: Total/live time: 1086.2465820 1086.2465820 40 Percent Complete: Total/live time: 1086.2465820 1086.2465820 50 Percent Complete: Total/live time: 1669.2449951 1669.2449951 100 Percent Complete: Total/live time: 1669.2449951 1669.2449951 Number of attitude steps used: 4 Number of attitude steps avail: 490 Mean RA/DEC pixel offset: -47.5697 -71.2476 writing expo file: ad11502010s000302m.expo closing attitude file... closing data file...-> Generating low and high energy images for ad11502010s000302m.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad11502010s000302m Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 13:39:04 0.17E+04 14468 1000 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000302m.evt Total Good Bad: Region Time Phase Cut 14468 14468 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 14468 14468 0 0 0 0 in 1669.24 seconds Image has 14468 counts for 8.667 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000302m.evt Total Good Bad: Region Time Phase Cut 14468 7902 0 0 0 6566 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 14468 7902 0 0 0 6566 in 1669.24 seconds Image has 7902 counts for 4.734 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000302m.evt Total Good Bad: Region Time Phase Cut 14468 6576 0 0 0 7892 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 14468 6576 0 0 0 7892 in 1669.24 seconds Image has 6576 counts for 3.940 counts/sec Command not found; type ? for a command listing !ad11502010s000302m:ASCA > !ad11502010s000302m:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad11502010s000302m:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !ad11502010s000302m:ASCA > read events ad11502010s000302m.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !ad11502010s000302m:ASCA-SIS0-BRIGHT > set image sky !ad11502010s000302m:ASCA-SIS0-BRIGHT > filter region corner_point.reg !ad11502010s000302m:ASCA-SIS0-BRIGHT > extract image !ad11502010s000302m:ASCA-SIS0-BRIGHT > save image outfile=ad11502010s000302m.img Wrote image to file ad11502010s000302m.img !ad11502010s000302m:ASCA-SIS0-BRIGHT > filter pha_cut 0 547 !ad11502010s000302m:ASCA-SIS0-BRIGHT > extract image !ad11502010s000302m:ASCA-SIS0-BRIGHT > save image outfile=ad11502010s000302m_lo.img Wrote image to file ad11502010s000302m_lo.img !ad11502010s000302m:ASCA-SIS0-BRIGHT > clear pha_cut !ad11502010s000302m:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048 Warning: your PI upper bound: 2048 is above the maximum value. !ad11502010s000302m:ASCA-SIS0-BRIGHT > extract image !ad11502010s000302m:ASCA-SIS0-BRIGHT > save image outfile=ad11502010s000302m_hi.img Wrote image to file ad11502010s000302m_hi.img !ad11502010s000302m:ASCA-SIS0-BRIGHT > exit save_session=no-> Generating exposure map ad11502010s000402m.expo
ASCAEXPO_V0.9b reading data file: ad11502010s000402m.evt reading gti ext: STDGTI reading hp ext: HOT_PIXELS reading cal file: s0_teldef_ascalin.fits making an inst map... SIS AREA DISC ENABL OFF CHIP: 0 1 2 3 CCD POWER ON/OFF: OFF OFF ON OFF AREA DISC IN/OUT: OUT OUT IN IN AREA DISC H START: 6 6 6 316 AREA DISC H STOP: 425 67 200 425 AREA DISC V START: 2 2 2 2 AREA DISC V STOP: 422 422 150 112 reading att file: ./fa970325_1338.0040 making an exposure map... Aspect RA/DEC/ROLL : 254.4330 35.3094 278.6038 Mean RA/DEC/ROLL : 254.4113 35.2918 278.6038 Pnt RA/DEC/ROLL : 254.4577 35.3217 278.6038 Image rebin factor : 4 Attitude Records : 25893 Hot Pixels : 7 GTI intervals : 5 Total GTI (secs) : 4618.041 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 650.9980469 650.9980469 20 Percent Complete: Total/live time: 1834.0412598 1834.0412598 30 Percent Complete: Total/live time: 1834.0412598 1834.0412598 40 Percent Complete: Total/live time: 2486.9335938 2486.9335938 50 Percent Complete: Total/live time: 2486.9335938 2486.9335938 60 Percent Complete: Total/live time: 3102.9316406 3102.9316406 70 Percent Complete: Total/live time: 3694.9301758 3694.9301758 80 Percent Complete: Total/live time: 4010.9291992 4010.9291992 90 Percent Complete: Total/live time: 4406.9277344 4406.9277344 100 Percent Complete: Total/live time: 4618.0415039 4618.0415039 Number of attitude steps used: 11 Number of attitude steps avail: 1875 Mean RA/DEC pixel offset: -61.0418 -81.9347 writing expo file: ad11502010s000402m.expo closing attitude file... closing data file...-> Generating low and high energy images for ad11502010s000402m.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad11502010s000402m Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 17:30:16 0.46E+04 24541 0010 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000402m.evt Total Good Bad: Region Time Phase Cut 24541 24541 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 24541 24541 0 0 0 0 in 4618.04 seconds Image has 24541 counts for 5.314 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000402m.evt Total Good Bad: Region Time Phase Cut 24541 12875 0 0 0 11666 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 24541 12875 0 0 0 11666 in 4618.04 seconds Image has 12875 counts for 2.788 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000402m.evt Total Good Bad: Region Time Phase Cut 24541 11682 0 0 0 12859 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 24541 11682 0 0 0 12859 in 4618.04 seconds Image has 11682 counts for 2.530 counts/sec Command not found; type ? for a command listing !ad11502010s000402m:ASCA > !ad11502010s000402m:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad11502010s000402m:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !ad11502010s000402m:ASCA > read events ad11502010s000402m.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !ad11502010s000402m:ASCA-SIS0-BRIGHT > set image sky !ad11502010s000402m:ASCA-SIS0-BRIGHT > filter region corner_point.reg !ad11502010s000402m:ASCA-SIS0-BRIGHT > extract image !ad11502010s000402m:ASCA-SIS0-BRIGHT > save image outfile=ad11502010s000402m.img Wrote image to file ad11502010s000402m.img !ad11502010s000402m:ASCA-SIS0-BRIGHT > filter pha_cut 0 547 !ad11502010s000402m:ASCA-SIS0-BRIGHT > extract image !ad11502010s000402m:ASCA-SIS0-BRIGHT > save image outfile=ad11502010s000402m_lo.img Wrote image to file ad11502010s000402m_lo.img !ad11502010s000402m:ASCA-SIS0-BRIGHT > clear pha_cut !ad11502010s000402m:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048 Warning: your PI upper bound: 2048 is above the maximum value. !ad11502010s000402m:ASCA-SIS0-BRIGHT > extract image !ad11502010s000402m:ASCA-SIS0-BRIGHT > save image outfile=ad11502010s000402m_hi.img Wrote image to file ad11502010s000402m_hi.img !ad11502010s000402m:ASCA-SIS0-BRIGHT > exit save_session=no-> Generating exposure map ad11502010s000502h.expo
ASCAEXPO_V0.9b reading data file: ad11502010s000502h.evt reading gti ext: STDGTI reading hp ext: HOT_PIXELS reading cal file: s0_teldef_ascalin.fits making an inst map... SIS AREA DISC ENABL OFF CHIP: 0 1 2 3 CCD POWER ON/OFF: ON OFF OFF OFF AREA DISC IN/OUT: OUT OUT IN IN AREA DISC H START: 6 6 6 316 AREA DISC H STOP: 425 67 200 425 AREA DISC V START: 2 2 2 2 AREA DISC V STOP: 422 422 150 112 reading att file: ./fa970325_1338.0040 making an exposure map... Aspect RA/DEC/ROLL : 254.4330 35.3094 278.6063 Mean RA/DEC/ROLL : 254.4327 35.2863 278.6063 Pnt RA/DEC/ROLL : 254.3461 35.3524 278.6063 Image rebin factor : 4 Attitude Records : 25893 Hot Pixels : 33 GTI intervals : 12 Total GTI (secs) : 1841.614 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 225.9940338 225.9940338 20 Percent Complete: Total/live time: 551.9930420 551.9930420 30 Percent Complete: Total/live time: 763.9923096 763.9923096 40 Percent Complete: Total/live time: 763.9923096 763.9923096 50 Percent Complete: Total/live time: 1235.9597168 1235.9597168 60 Percent Complete: Total/live time: 1235.9597168 1235.9597168 70 Percent Complete: Total/live time: 1841.6142578 1841.6142578 100 Percent Complete: Total/live time: 1841.6142578 1841.6142578 Number of attitude steps used: 12 Number of attitude steps avail: 3831 Mean RA/DEC pixel offset: -64.0397 -73.2144 writing expo file: ad11502010s000502h.expo closing attitude file... closing data file...-> Generating low and high energy images for ad11502010s000502h.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad11502010s000502h Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 14:00:08 0.18E+04 16356 1000 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000502h.evt Total Good Bad: Region Time Phase Cut 16356 16356 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 16356 16356 0 0 0 0 in 1841.61 seconds Image has 16356 counts for 8.881 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000502h.evt Total Good Bad: Region Time Phase Cut 16356 8774 0 0 0 7582 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 16356 8774 0 0 0 7582 in 1841.61 seconds Image has 8774 counts for 4.764 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000502h.evt Total Good Bad: Region Time Phase Cut 16356 7593 0 0 0 8763 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 16356 7593 0 0 0 8763 in 1841.61 seconds Image has 7593 counts for 4.123 counts/sec Command not found; type ? for a command listing !ad11502010s000502h:ASCA > !ad11502010s000502h:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad11502010s000502h:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !ad11502010s000502h:ASCA > read events ad11502010s000502h.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !ad11502010s000502h:ASCA-SIS0-BRIGHT > set image sky !ad11502010s000502h:ASCA-SIS0-BRIGHT > filter region corner_point.reg !ad11502010s000502h:ASCA-SIS0-BRIGHT > extract image !ad11502010s000502h:ASCA-SIS0-BRIGHT > save image outfile=ad11502010s000502h.img Wrote image to file ad11502010s000502h.img !ad11502010s000502h:ASCA-SIS0-BRIGHT > filter pha_cut 0 547 !ad11502010s000502h:ASCA-SIS0-BRIGHT > extract image !ad11502010s000502h:ASCA-SIS0-BRIGHT > save image outfile=ad11502010s000502h_lo.img Wrote image to file ad11502010s000502h_lo.img !ad11502010s000502h:ASCA-SIS0-BRIGHT > clear pha_cut !ad11502010s000502h:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048 Warning: your PI upper bound: 2048 is above the maximum value. !ad11502010s000502h:ASCA-SIS0-BRIGHT > extract image !ad11502010s000502h:ASCA-SIS0-BRIGHT > save image outfile=ad11502010s000502h_hi.img Wrote image to file ad11502010s000502h_hi.img !ad11502010s000502h:ASCA-SIS0-BRIGHT > exit save_session=no-> Generating exposure map ad11502010s000802h.expo
ASCAEXPO_V0.9b reading data file: ad11502010s000802h.evt reading gti ext: STDGTI reading hp ext: HOT_PIXELS reading cal file: s0_teldef_ascalin.fits making an inst map... SIS AREA DISC ENABL OFF CHIP: 0 1 2 3 CCD POWER ON/OFF: OFF ON OFF OFF AREA DISC IN/OUT: OUT OUT IN IN AREA DISC H START: 6 6 6 316 AREA DISC H STOP: 425 67 200 425 AREA DISC V START: 2 2 2 2 AREA DISC V STOP: 422 422 150 112 reading att file: ./fa970325_1338.0040 making an exposure map... Aspect RA/DEC/ROLL : 254.4330 35.3094 278.6005 Mean RA/DEC/ROLL : 254.4097 35.2930 278.6005 Pnt RA/DEC/ROLL : 254.4626 35.3203 278.6005 Image rebin factor : 4 Attitude Records : 25893 Hot Pixels : 8 GTI intervals : 4 Total GTI (secs) : 2885.908 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 375.4471130 375.4471130 20 Percent Complete: Total/live time: 1093.9450684 1093.9450684 30 Percent Complete: Total/live time: 1093.9450684 1093.9450684 40 Percent Complete: Total/live time: 1439.9438477 1439.9438477 50 Percent Complete: Total/live time: 1947.4422607 1947.4422607 60 Percent Complete: Total/live time: 1947.4422607 1947.4422607 70 Percent Complete: Total/live time: 2885.9082031 2885.9082031 100 Percent Complete: Total/live time: 2885.9082031 2885.9082031 Number of attitude steps used: 10 Number of attitude steps avail: 5922 Mean RA/DEC pixel offset: -54.5193 -86.1419 writing expo file: ad11502010s000802h.expo closing attitude file... closing data file...-> Generating low and high energy images for ad11502010s000802h.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad11502010s000802h Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 15:32:24 0.29E+04 12182 0100 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000802h.evt Total Good Bad: Region Time Phase Cut 12182 12182 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 12182 12182 0 0 0 0 in 2885.91 seconds Image has 12182 counts for 4.221 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000802h.evt Total Good Bad: Region Time Phase Cut 12182 6393 0 0 0 5789 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 12182 6393 0 0 0 5789 in 2885.91 seconds Image has 6393 counts for 2.215 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000802h.evt Total Good Bad: Region Time Phase Cut 12182 5793 0 0 0 6389 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 12182 5793 0 0 0 6389 in 2885.91 seconds Image has 5793 counts for 2.007 counts/sec Command not found; type ? for a command listing !ad11502010s000802h:ASCA > !ad11502010s000802h:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad11502010s000802h:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !ad11502010s000802h:ASCA > read events ad11502010s000802h.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !ad11502010s000802h:ASCA-SIS0-BRIGHT > set image sky !ad11502010s000802h:ASCA-SIS0-BRIGHT > filter region corner_point.reg !ad11502010s000802h:ASCA-SIS0-BRIGHT > extract image !ad11502010s000802h:ASCA-SIS0-BRIGHT > save image outfile=ad11502010s000802h.img Wrote image to file ad11502010s000802h.img !ad11502010s000802h:ASCA-SIS0-BRIGHT > filter pha_cut 0 547 !ad11502010s000802h:ASCA-SIS0-BRIGHT > extract image !ad11502010s000802h:ASCA-SIS0-BRIGHT > save image outfile=ad11502010s000802h_lo.img Wrote image to file ad11502010s000802h_lo.img !ad11502010s000802h:ASCA-SIS0-BRIGHT > clear pha_cut !ad11502010s000802h:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048 Warning: your PI upper bound: 2048 is above the maximum value. !ad11502010s000802h:ASCA-SIS0-BRIGHT > extract image !ad11502010s000802h:ASCA-SIS0-BRIGHT > save image outfile=ad11502010s000802h_hi.img Wrote image to file ad11502010s000802h_hi.img !ad11502010s000802h:ASCA-SIS0-BRIGHT > exit save_session=no-> Generating exposure map ad11502010s001002h.expo
ASCAEXPO_V0.9b reading data file: ad11502010s001002h.evt reading gti ext: STDGTI reading hp ext: HOT_PIXELS reading cal file: s0_teldef_ascalin.fits making an inst map... SIS AREA DISC ENABL OFF CHIP: 0 1 2 3 CCD POWER ON/OFF: OFF OFF ON OFF AREA DISC IN/OUT: OUT OUT IN IN AREA DISC H START: 6 6 6 316 AREA DISC H STOP: 425 67 200 425 AREA DISC V START: 2 2 2 2 AREA DISC V STOP: 422 422 150 112 reading att file: ./fa970325_1338.0040 making an exposure map... Aspect RA/DEC/ROLL : 254.4330 35.3094 278.6022 Mean RA/DEC/ROLL : 254.4103 35.2927 278.6022 Pnt RA/DEC/ROLL : 254.4601 35.3212 278.6022 Image rebin factor : 4 Attitude Records : 25893 Hot Pixels : 8 GTI intervals : 2 Total GTI (secs) : 1261.896 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 366.9613342 366.9613342 20 Percent Complete: Total/live time: 366.9613342 366.9613342 30 Percent Complete: Total/live time: 566.4607544 566.4607544 40 Percent Complete: Total/live time: 566.4607544 566.4607544 50 Percent Complete: Total/live time: 1261.8962402 1261.8962402 100 Percent Complete: Total/live time: 1261.8962402 1261.8962402 Number of attitude steps used: 4 Number of attitude steps avail: 2565 Mean RA/DEC pixel offset: -46.6855 -70.4790 writing expo file: ad11502010s001002h.expo closing attitude file... closing data file...-> Generating low and high energy images for ad11502010s001002h.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad11502010s001002h Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 17:07:20 0.13E+04 7600 0010 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s001002h.evt Total Good Bad: Region Time Phase Cut 7600 7600 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 7600 7600 0 0 0 0 in 1261.90 seconds Image has 7600 counts for 6.023 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s001002h.evt Total Good Bad: Region Time Phase Cut 7600 4012 0 0 0 3588 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 7600 4012 0 0 0 3588 in 1261.90 seconds Image has 4012 counts for 3.179 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s001002h.evt Total Good Bad: Region Time Phase Cut 7600 3593 0 0 0 4007 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 7600 3593 0 0 0 4007 in 1261.90 seconds Image has 3593 counts for 2.847 counts/sec Command not found; type ? for a command listing !ad11502010s001002h:ASCA > !ad11502010s001002h:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad11502010s001002h:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !ad11502010s001002h:ASCA > read events ad11502010s001002h.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !ad11502010s001002h:ASCA-SIS0-BRIGHT > set image sky !ad11502010s001002h:ASCA-SIS0-BRIGHT > filter region corner_point.reg !ad11502010s001002h:ASCA-SIS0-BRIGHT > extract image !ad11502010s001002h:ASCA-SIS0-BRIGHT > save image outfile=ad11502010s001002h.img Wrote image to file ad11502010s001002h.img !ad11502010s001002h:ASCA-SIS0-BRIGHT > filter pha_cut 0 547 !ad11502010s001002h:ASCA-SIS0-BRIGHT > extract image !ad11502010s001002h:ASCA-SIS0-BRIGHT > save image outfile=ad11502010s001002h_lo.img Wrote image to file ad11502010s001002h_lo.img !ad11502010s001002h:ASCA-SIS0-BRIGHT > clear pha_cut !ad11502010s001002h:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048 Warning: your PI upper bound: 2048 is above the maximum value. !ad11502010s001002h:ASCA-SIS0-BRIGHT > extract image !ad11502010s001002h:ASCA-SIS0-BRIGHT > save image outfile=ad11502010s001002h_hi.img Wrote image to file ad11502010s001002h_hi.img !ad11502010s001002h:ASCA-SIS0-BRIGHT > exit save_session=no-> Generating exposure map ad11502010s001102m.expo
ASCAEXPO_V0.9b reading data file: ad11502010s001102m.evt reading gti ext: STDGTI reading hp ext: HOT_PIXELS reading cal file: s0_teldef_ascalin.fits making an inst map... SIS AREA DISC ENABL OFF CHIP: 0 1 2 3 CCD POWER ON/OFF: OFF ON OFF OFF AREA DISC IN/OUT: OUT OUT IN IN AREA DISC H START: 6 6 6 316 AREA DISC H STOP: 425 67 200 425 AREA DISC V START: 2 2 2 2 AREA DISC V STOP: 422 422 150 112 reading att file: ./fa970325_1338.0040 making an exposure map... Aspect RA/DEC/ROLL : 254.4330 35.3094 278.6037 Mean RA/DEC/ROLL : 254.4109 35.2913 278.6037 Pnt RA/DEC/ROLL : 254.4577 35.3225 278.6037 Image rebin factor : 4 Attitude Records : 25893 Hot Pixels : 20 GTI intervals : 2 Total GTI (secs) : 1059.828 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 1059.8281250 1059.8281250 100 Percent Complete: Total/live time: 1059.8281250 1059.8281250 Number of attitude steps used: 2 Number of attitude steps avail: 283 Mean RA/DEC pixel offset: -34.1377 -46.3821 writing expo file: ad11502010s001102m.expo closing attitude file... closing data file...-> Generating low and high energy images for ad11502010s001102m.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad11502010s001102m Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 20:50:00 0.11E+04 4474 0100 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s001102m.evt Total Good Bad: Region Time Phase Cut 4474 4474 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 4474 4474 0 0 0 0 in 1059.83 seconds Image has 4474 counts for 4.221 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s001102m.evt Total Good Bad: Region Time Phase Cut 4474 2355 0 0 0 2119 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 4474 2355 0 0 0 2119 in 1059.83 seconds Image has 2355 counts for 2.222 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s001102m.evt Total Good Bad: Region Time Phase Cut 4474 2123 0 0 0 2351 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 4474 2123 0 0 0 2351 in 1059.83 seconds Image has 2123 counts for 2.003 counts/sec Command not found; type ? for a command listing !ad11502010s001102m:ASCA > !ad11502010s001102m:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad11502010s001102m:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !ad11502010s001102m:ASCA > read events ad11502010s001102m.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !ad11502010s001102m:ASCA-SIS0-BRIGHT > set image sky !ad11502010s001102m:ASCA-SIS0-BRIGHT > filter region corner_point.reg !ad11502010s001102m:ASCA-SIS0-BRIGHT > extract image !ad11502010s001102m:ASCA-SIS0-BRIGHT > save image outfile=ad11502010s001102m.img Wrote image to file ad11502010s001102m.img !ad11502010s001102m:ASCA-SIS0-BRIGHT > filter pha_cut 0 547 !ad11502010s001102m:ASCA-SIS0-BRIGHT > extract image !ad11502010s001102m:ASCA-SIS0-BRIGHT > save image outfile=ad11502010s001102m_lo.img Wrote image to file ad11502010s001102m_lo.img !ad11502010s001102m:ASCA-SIS0-BRIGHT > clear pha_cut !ad11502010s001102m:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048 Warning: your PI upper bound: 2048 is above the maximum value. !ad11502010s001102m:ASCA-SIS0-BRIGHT > extract image !ad11502010s001102m:ASCA-SIS0-BRIGHT > save image outfile=ad11502010s001102m_hi.img Wrote image to file ad11502010s001102m_hi.img !ad11502010s001102m:ASCA-SIS0-BRIGHT > exit save_session=no-> Generating exposure map ad11502010s100102h.expo
ASCAEXPO_V0.9b reading data file: ad11502010s100102h.evt reading gti ext: STDGTI reading hp ext: HOT_PIXELS reading cal file: s1_teldef_ascalin.fits making an inst map... SIS AREA DISC ENABL OFF CHIP: 0 1 2 3 CCD POWER ON/OFF: OFF ON OFF OFF AREA DISC IN/OUT: OUT OUT OUT OUT AREA DISC H START: 6 6 6 6 AREA DISC H STOP: 425 425 425 103 AREA DISC V START: 2 2 2 2 AREA DISC V STOP: 422 422 422 422 reading att file: ./fa970325_1338.0040 making an exposure map... Aspect RA/DEC/ROLL : 254.4330 35.3094 278.6150 Mean RA/DEC/ROLL : 254.4308 35.2930 278.6150 Pnt RA/DEC/ROLL : 254.4395 35.3209 278.6150 Image rebin factor : 4 Attitude Records : 25893 Hot Pixels : 29 GTI intervals : 5 Total GTI (secs) : 3723.846 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 1400.4412842 1400.4412842 20 Percent Complete: Total/live time: 1400.4412842 1400.4412842 30 Percent Complete: Total/live time: 1404.9412842 1404.9412842 40 Percent Complete: Total/live time: 1843.9086914 1843.9086914 50 Percent Complete: Total/live time: 2484.7553711 2484.7553711 60 Percent Complete: Total/live time: 2484.7553711 2484.7553711 70 Percent Complete: Total/live time: 3175.7534180 3175.7534180 80 Percent Complete: Total/live time: 3175.7534180 3175.7534180 90 Percent Complete: Total/live time: 3723.8464355 3723.8464355 100 Percent Complete: Total/live time: 3723.8464355 3723.8464355 Number of attitude steps used: 9 Number of attitude steps avail: 7905 Mean RA/DEC pixel offset: -62.7804 -19.0276 writing expo file: ad11502010s100102h.expo closing attitude file... closing data file...-> Generating low and high energy images for ad11502010s100102h.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad11502010s100102h Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.37E+04 96199 0100 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100102h.evt Total Good Bad: Region Time Phase Cut 96199 96199 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 96199 96199 0 0 0 0 in 3723.85 seconds Image has 96199 counts for 25.83 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100102h.evt Total Good Bad: Region Time Phase Cut 96199 51002 0 0 0 45197 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 96199 51002 0 0 0 45197 in 3723.85 seconds Image has 51002 counts for 13.70 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100102h.evt Total Good Bad: Region Time Phase Cut 96199 45270 0 0 0 50929 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 96199 45270 0 0 0 50929 in 3723.85 seconds Image has 45270 counts for 12.16 counts/sec Command not found; type ? for a command listing !ad11502010s100102h:ASCA > !ad11502010s100102h:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad11502010s100102h:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !ad11502010s100102h:ASCA > read events ad11502010s100102h.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !ad11502010s100102h:ASCA-SIS1-BRIGHT > set image sky !ad11502010s100102h:ASCA-SIS1-BRIGHT > filter region corner_point.reg !ad11502010s100102h:ASCA-SIS1-BRIGHT > extract image !ad11502010s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad11502010s100102h.img Wrote image to file ad11502010s100102h.img !ad11502010s100102h:ASCA-SIS1-BRIGHT > filter pha_cut 0 547 !ad11502010s100102h:ASCA-SIS1-BRIGHT > extract image !ad11502010s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad11502010s100102h_lo.img Wrote image to file ad11502010s100102h_lo.img !ad11502010s100102h:ASCA-SIS1-BRIGHT > clear pha_cut !ad11502010s100102h:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048 Warning: your PI upper bound: 2048 is above the maximum value. !ad11502010s100102h:ASCA-SIS1-BRIGHT > extract image !ad11502010s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad11502010s100102h_hi.img Wrote image to file ad11502010s100102h_hi.img !ad11502010s100102h:ASCA-SIS1-BRIGHT > exit save_session=no-> Generating exposure map ad11502010s100202m.expo
ASCAEXPO_V0.9b reading data file: ad11502010s100202m.evt reading gti ext: STDGTI reading hp ext: HOT_PIXELS reading cal file: s1_teldef_ascalin.fits making an inst map... SIS AREA DISC ENABL OFF CHIP: 0 1 2 3 CCD POWER ON/OFF: OFF ON OFF OFF AREA DISC IN/OUT: OUT OUT OUT OUT AREA DISC H START: 6 6 6 6 AREA DISC H STOP: 425 425 425 103 AREA DISC V START: 2 2 2 2 AREA DISC V STOP: 422 422 422 422 reading att file: ./fa970325_1338.0040 making an exposure map... Aspect RA/DEC/ROLL : 254.4330 35.3094 278.6155 Mean RA/DEC/ROLL : 254.4303 35.2929 278.6155 Pnt RA/DEC/ROLL : 254.4390 35.3208 278.6155 Image rebin factor : 4 Attitude Records : 25893 Hot Pixels : 18 GTI intervals : 4 Total GTI (secs) : 2122.060 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 1290.0600586 1290.0600586 20 Percent Complete: Total/live time: 1290.0600586 1290.0600586 30 Percent Complete: Total/live time: 2122.0600586 2122.0600586 100 Percent Complete: Total/live time: 2122.0600586 2122.0600586 Number of attitude steps used: 3 Number of attitude steps avail: 834 Mean RA/DEC pixel offset: -48.6086 -13.5591 writing expo file: ad11502010s100202m.expo closing attitude file... closing data file...-> Generating low and high energy images for ad11502010s100202m.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad11502010s100202m Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 19:15:20 0.21E+04 48215 0100 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100202m.evt Total Good Bad: Region Time Phase Cut 48215 48215 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 48215 48215 0 0 0 0 in 2122.06 seconds Image has 48215 counts for 22.72 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100202m.evt Total Good Bad: Region Time Phase Cut 48215 25532 0 0 0 22683 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 48215 25532 0 0 0 22683 in 2122.06 seconds Image has 25532 counts for 12.03 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100202m.evt Total Good Bad: Region Time Phase Cut 48215 22718 0 0 0 25497 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 48215 22718 0 0 0 25497 in 2122.06 seconds Image has 22718 counts for 10.71 counts/sec Command not found; type ? for a command listing !ad11502010s100202m:ASCA > !ad11502010s100202m:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad11502010s100202m:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !ad11502010s100202m:ASCA > read events ad11502010s100202m.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !ad11502010s100202m:ASCA-SIS1-BRIGHT > set image sky !ad11502010s100202m:ASCA-SIS1-BRIGHT > filter region corner_point.reg !ad11502010s100202m:ASCA-SIS1-BRIGHT > extract image !ad11502010s100202m:ASCA-SIS1-BRIGHT > save image outfile=ad11502010s100202m.img Wrote image to file ad11502010s100202m.img !ad11502010s100202m:ASCA-SIS1-BRIGHT > filter pha_cut 0 547 !ad11502010s100202m:ASCA-SIS1-BRIGHT > extract image !ad11502010s100202m:ASCA-SIS1-BRIGHT > save image outfile=ad11502010s100202m_lo.img Wrote image to file ad11502010s100202m_lo.img !ad11502010s100202m:ASCA-SIS1-BRIGHT > clear pha_cut !ad11502010s100202m:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048 Warning: your PI upper bound: 2048 is above the maximum value. !ad11502010s100202m:ASCA-SIS1-BRIGHT > extract image !ad11502010s100202m:ASCA-SIS1-BRIGHT > save image outfile=ad11502010s100202m_hi.img Wrote image to file ad11502010s100202m_hi.img !ad11502010s100202m:ASCA-SIS1-BRIGHT > exit save_session=no-> Generating exposure map ad11502010s100302m.expo
ASCAEXPO_V0.9b reading data file: ad11502010s100302m.evt reading gti ext: STDGTI reading hp ext: HOT_PIXELS reading cal file: s1_teldef_ascalin.fits making an inst map... SIS AREA DISC ENABL OFF CHIP: 0 1 2 3 CCD POWER ON/OFF: OFF OFF ON OFF AREA DISC IN/OUT: OUT OUT OUT OUT AREA DISC H START: 6 6 6 6 AREA DISC H STOP: 425 425 425 103 AREA DISC V START: 2 2 2 2 AREA DISC V STOP: 422 422 422 422 reading att file: ./fa970325_1338.0040 making an exposure map... Aspect RA/DEC/ROLL : 254.4330 35.3094 278.6204 Mean RA/DEC/ROLL : 254.4738 35.2826 278.6204 Pnt RA/DEC/ROLL : 254.3256 35.3386 278.6204 Image rebin factor : 4 Attitude Records : 25893 Hot Pixels : 15 GTI intervals : 4 Total GTI (secs) : 1701.245 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 1117.7465820 1117.7465820 20 Percent Complete: Total/live time: 1117.7465820 1117.7465820 30 Percent Complete: Total/live time: 1118.2465820 1118.2465820 40 Percent Complete: Total/live time: 1118.2465820 1118.2465820 50 Percent Complete: Total/live time: 1701.2449951 1701.2449951 100 Percent Complete: Total/live time: 1701.2449951 1701.2449951 Number of attitude steps used: 4 Number of attitude steps avail: 490 Mean RA/DEC pixel offset: -50.9029 -17.3593 writing expo file: ad11502010s100302m.expo closing attitude file... closing data file...-> Generating low and high energy images for ad11502010s100302m.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad11502010s100302m Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 13:39:04 0.17E+04 25917 0010 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100302m.evt Total Good Bad: Region Time Phase Cut 25917 25917 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 25917 25917 0 0 0 0 in 1701.24 seconds Image has 25917 counts for 15.23 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100302m.evt Total Good Bad: Region Time Phase Cut 25917 13644 0 0 0 12273 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 25917 13644 0 0 0 12273 in 1701.24 seconds Image has 13644 counts for 8.020 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100302m.evt Total Good Bad: Region Time Phase Cut 25917 12298 0 0 0 13619 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 25917 12298 0 0 0 13619 in 1701.24 seconds Image has 12298 counts for 7.229 counts/sec Command not found; type ? for a command listing !ad11502010s100302m:ASCA > !ad11502010s100302m:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad11502010s100302m:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !ad11502010s100302m:ASCA > read events ad11502010s100302m.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !ad11502010s100302m:ASCA-SIS1-BRIGHT > set image sky !ad11502010s100302m:ASCA-SIS1-BRIGHT > filter region corner_point.reg !ad11502010s100302m:ASCA-SIS1-BRIGHT > extract image !ad11502010s100302m:ASCA-SIS1-BRIGHT > save image outfile=ad11502010s100302m.img Wrote image to file ad11502010s100302m.img !ad11502010s100302m:ASCA-SIS1-BRIGHT > filter pha_cut 0 547 !ad11502010s100302m:ASCA-SIS1-BRIGHT > extract image !ad11502010s100302m:ASCA-SIS1-BRIGHT > save image outfile=ad11502010s100302m_lo.img Wrote image to file ad11502010s100302m_lo.img !ad11502010s100302m:ASCA-SIS1-BRIGHT > clear pha_cut !ad11502010s100302m:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048 Warning: your PI upper bound: 2048 is above the maximum value. !ad11502010s100302m:ASCA-SIS1-BRIGHT > extract image !ad11502010s100302m:ASCA-SIS1-BRIGHT > save image outfile=ad11502010s100302m_hi.img Wrote image to file ad11502010s100302m_hi.img !ad11502010s100302m:ASCA-SIS1-BRIGHT > exit save_session=no-> Generating exposure map ad11502010s100402h.expo
ASCAEXPO_V0.9b reading data file: ad11502010s100402h.evt reading gti ext: STDGTI reading hp ext: HOT_PIXELS reading cal file: s1_teldef_ascalin.fits making an inst map... SIS AREA DISC ENABL OFF CHIP: 0 1 2 3 CCD POWER ON/OFF: OFF OFF ON OFF AREA DISC IN/OUT: OUT OUT OUT OUT AREA DISC H START: 6 6 6 6 AREA DISC H STOP: 425 425 425 103 AREA DISC V START: 2 2 2 2 AREA DISC V STOP: 422 422 422 422 reading att file: ./fa970325_1338.0040 making an exposure map... Aspect RA/DEC/ROLL : 254.4330 35.3094 278.6175 Mean RA/DEC/ROLL : 254.4518 35.2878 278.6175 Pnt RA/DEC/ROLL : 254.3266 35.3509 278.6175 Image rebin factor : 4 Attitude Records : 25893 Hot Pixels : 21 GTI intervals : 14 Total GTI (secs) : 1769.466 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 225.9940338 225.9940338 20 Percent Complete: Total/live time: 487.9930420 487.9930420 30 Percent Complete: Total/live time: 699.9923096 699.9923096 40 Percent Complete: Total/live time: 1171.9597168 1171.9597168 50 Percent Complete: Total/live time: 1171.9597168 1171.9597168 60 Percent Complete: Total/live time: 1172.3868408 1172.3868408 70 Percent Complete: Total/live time: 1769.4663086 1769.4663086 100 Percent Complete: Total/live time: 1769.4663086 1769.4663086 Number of attitude steps used: 12 Number of attitude steps avail: 3824 Mean RA/DEC pixel offset: -68.0801 -7.3544 writing expo file: ad11502010s100402h.expo closing attitude file... closing data file...-> Generating low and high energy images for ad11502010s100402h.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad11502010s100402h Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 14:00:08 0.18E+04 27028 0010 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100402h.evt Total Good Bad: Region Time Phase Cut 27028 27028 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 27028 27028 0 0 0 0 in 1769.47 seconds Image has 27028 counts for 15.27 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100402h.evt Total Good Bad: Region Time Phase Cut 27028 14182 0 0 0 12846 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 27028 14182 0 0 0 12846 in 1769.47 seconds Image has 14182 counts for 8.015 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100402h.evt Total Good Bad: Region Time Phase Cut 27028 12863 0 0 0 14165 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 27028 12863 0 0 0 14165 in 1769.47 seconds Image has 12863 counts for 7.269 counts/sec Command not found; type ? for a command listing !ad11502010s100402h:ASCA > !ad11502010s100402h:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad11502010s100402h:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !ad11502010s100402h:ASCA > read events ad11502010s100402h.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !ad11502010s100402h:ASCA-SIS1-BRIGHT > set image sky !ad11502010s100402h:ASCA-SIS1-BRIGHT > filter region corner_point.reg !ad11502010s100402h:ASCA-SIS1-BRIGHT > extract image !ad11502010s100402h:ASCA-SIS1-BRIGHT > save image outfile=ad11502010s100402h.img Wrote image to file ad11502010s100402h.img !ad11502010s100402h:ASCA-SIS1-BRIGHT > filter pha_cut 0 547 !ad11502010s100402h:ASCA-SIS1-BRIGHT > extract image !ad11502010s100402h:ASCA-SIS1-BRIGHT > save image outfile=ad11502010s100402h_lo.img Wrote image to file ad11502010s100402h_lo.img !ad11502010s100402h:ASCA-SIS1-BRIGHT > clear pha_cut !ad11502010s100402h:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048 Warning: your PI upper bound: 2048 is above the maximum value. !ad11502010s100402h:ASCA-SIS1-BRIGHT > extract image !ad11502010s100402h:ASCA-SIS1-BRIGHT > save image outfile=ad11502010s100402h_hi.img Wrote image to file ad11502010s100402h_hi.img !ad11502010s100402h:ASCA-SIS1-BRIGHT > exit save_session=no-> Generating exposure map ad11502010s100502m.expo
ASCAEXPO_V0.9b reading data file: ad11502010s100502m.evt reading gti ext: STDGTI reading hp ext: HOT_PIXELS reading cal file: s1_teldef_ascalin.fits making an inst map... SIS AREA DISC ENABL OFF CHIP: 0 1 2 3 CCD POWER ON/OFF: ON OFF OFF OFF AREA DISC IN/OUT: OUT OUT OUT OUT AREA DISC H START: 6 6 6 6 AREA DISC H STOP: 425 425 425 103 AREA DISC V START: 2 2 2 2 AREA DISC V STOP: 422 422 422 422 reading att file: ./fa970325_1338.0040 making an exposure map... Aspect RA/DEC/ROLL : 254.4330 35.3094 278.6150 Mean RA/DEC/ROLL : 254.4307 35.2933 278.6150 Pnt RA/DEC/ROLL : 254.4383 35.3203 278.6150 Image rebin factor : 4 Attitude Records : 25893 Hot Pixels : 17 GTI intervals : 6 Total GTI (secs) : 4586.041 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 650.9980469 650.9980469 20 Percent Complete: Total/live time: 1866.0412598 1866.0412598 30 Percent Complete: Total/live time: 1866.0412598 1866.0412598 40 Percent Complete: Total/live time: 2486.9335938 2486.9335938 50 Percent Complete: Total/live time: 2486.9335938 2486.9335938 60 Percent Complete: Total/live time: 3070.9316406 3070.9316406 70 Percent Complete: Total/live time: 3662.9301758 3662.9301758 80 Percent Complete: Total/live time: 3978.9291992 3978.9291992 90 Percent Complete: Total/live time: 4374.9277344 4374.9277344 100 Percent Complete: Total/live time: 4586.0415039 4586.0415039 Number of attitude steps used: 11 Number of attitude steps avail: 1875 Mean RA/DEC pixel offset: -65.0820 -16.6155 writing expo file: ad11502010s100502m.expo closing attitude file... closing data file...-> Generating low and high energy images for ad11502010s100502m.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad11502010s100502m Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 17:30:16 0.46E+04 9231 1000 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100502m.evt Total Good Bad: Region Time Phase Cut 9231 9231 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 9231 9231 0 0 0 0 in 4586.04 seconds Image has 9231 counts for 2.013 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100502m.evt Total Good Bad: Region Time Phase Cut 9231 4501 0 0 0 4730 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 9231 4501 0 0 0 4730 in 4586.04 seconds Image has 4501 counts for 0.9815 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100502m.evt Total Good Bad: Region Time Phase Cut 9231 4740 0 0 0 4491 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 9231 4740 0 0 0 4491 in 4586.04 seconds Image has 4740 counts for 1.034 counts/sec Command not found; type ? for a command listing !ad11502010s100502m:ASCA > !ad11502010s100502m:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad11502010s100502m:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !ad11502010s100502m:ASCA > read events ad11502010s100502m.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !ad11502010s100502m:ASCA-SIS1-BRIGHT > set image sky !ad11502010s100502m:ASCA-SIS1-BRIGHT > filter region corner_point.reg !ad11502010s100502m:ASCA-SIS1-BRIGHT > extract image !ad11502010s100502m:ASCA-SIS1-BRIGHT > save image outfile=ad11502010s100502m.img Wrote image to file ad11502010s100502m.img !ad11502010s100502m:ASCA-SIS1-BRIGHT > filter pha_cut 0 547 !ad11502010s100502m:ASCA-SIS1-BRIGHT > extract image !ad11502010s100502m:ASCA-SIS1-BRIGHT > save image outfile=ad11502010s100502m_lo.img Wrote image to file ad11502010s100502m_lo.img !ad11502010s100502m:ASCA-SIS1-BRIGHT > clear pha_cut !ad11502010s100502m:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048 Warning: your PI upper bound: 2048 is above the maximum value. !ad11502010s100502m:ASCA-SIS1-BRIGHT > extract image !ad11502010s100502m:ASCA-SIS1-BRIGHT > save image outfile=ad11502010s100502m_hi.img Wrote image to file ad11502010s100502m_hi.img !ad11502010s100502m:ASCA-SIS1-BRIGHT > exit save_session=no-> Generating exposure map ad11502010s100802h.expo
ASCAEXPO_V0.9b reading data file: ad11502010s100802h.evt reading gti ext: STDGTI reading hp ext: HOT_PIXELS reading cal file: s1_teldef_ascalin.fits making an inst map... SIS AREA DISC ENABL OFF CHIP: 0 1 2 3 CCD POWER ON/OFF: OFF OFF OFF ON AREA DISC IN/OUT: OUT OUT OUT OUT AREA DISC H START: 6 6 6 6 AREA DISC H STOP: 425 425 425 103 AREA DISC V START: 2 2 2 2 AREA DISC V STOP: 422 422 422 422 reading att file: ./fa970325_1338.0040 making an exposure map... Aspect RA/DEC/ROLL : 254.4330 35.3094 278.6118 Mean RA/DEC/ROLL : 254.4291 35.2944 278.6118 Pnt RA/DEC/ROLL : 254.4431 35.3189 278.6118 Image rebin factor : 4 Attitude Records : 25893 Hot Pixels : 13 GTI intervals : 4 Total GTI (secs) : 2917.908 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 372.4473267 372.4473267 20 Percent Complete: Total/live time: 1278.9444580 1278.9444580 30 Percent Complete: Total/live time: 1278.9444580 1278.9444580 40 Percent Complete: Total/live time: 1503.9438477 1503.9438477 50 Percent Complete: Total/live time: 1503.9438477 1503.9438477 60 Percent Complete: Total/live time: 2011.4422607 2011.4422607 70 Percent Complete: Total/live time: 2917.9082031 2917.9082031 100 Percent Complete: Total/live time: 2917.9082031 2917.9082031 Number of attitude steps used: 10 Number of attitude steps avail: 5986 Mean RA/DEC pixel offset: -58.0362 -22.4174 writing expo file: ad11502010s100802h.expo closing attitude file... closing data file...-> Generating low and high energy images for ad11502010s100802h.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad11502010s100802h Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 15:32:24 0.29E+04 5870 0001 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100802h.evt Total Good Bad: Region Time Phase Cut 5870 5870 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 5870 5870 0 0 0 0 in 2917.91 seconds Image has 5870 counts for 2.012 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100802h.evt Total Good Bad: Region Time Phase Cut 5870 2843 0 0 0 3027 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 5870 2843 0 0 0 3027 in 2917.91 seconds Image has 2843 counts for 0.9743 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100802h.evt Total Good Bad: Region Time Phase Cut 5870 3030 0 0 0 2840 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 5870 3030 0 0 0 2840 in 2917.91 seconds Image has 3030 counts for 1.038 counts/sec Command not found; type ? for a command listing !ad11502010s100802h:ASCA > !ad11502010s100802h:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad11502010s100802h:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !ad11502010s100802h:ASCA > read events ad11502010s100802h.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !ad11502010s100802h:ASCA-SIS1-BRIGHT > set image sky !ad11502010s100802h:ASCA-SIS1-BRIGHT > filter region corner_point.reg !ad11502010s100802h:ASCA-SIS1-BRIGHT > extract image !ad11502010s100802h:ASCA-SIS1-BRIGHT > save image outfile=ad11502010s100802h.img Wrote image to file ad11502010s100802h.img !ad11502010s100802h:ASCA-SIS1-BRIGHT > filter pha_cut 0 547 !ad11502010s100802h:ASCA-SIS1-BRIGHT > extract image !ad11502010s100802h:ASCA-SIS1-BRIGHT > save image outfile=ad11502010s100802h_lo.img Wrote image to file ad11502010s100802h_lo.img !ad11502010s100802h:ASCA-SIS1-BRIGHT > clear pha_cut !ad11502010s100802h:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048 Warning: your PI upper bound: 2048 is above the maximum value. !ad11502010s100802h:ASCA-SIS1-BRIGHT > extract image !ad11502010s100802h:ASCA-SIS1-BRIGHT > save image outfile=ad11502010s100802h_hi.img Wrote image to file ad11502010s100802h_hi.img !ad11502010s100802h:ASCA-SIS1-BRIGHT > exit save_session=no-> Generating exposure map ad11502010s101002m.expo
ASCAEXPO_V0.9b reading data file: ad11502010s101002m.evt reading gti ext: STDGTI reading hp ext: HOT_PIXELS reading cal file: s1_teldef_ascalin.fits making an inst map... SIS AREA DISC ENABL OFF CHIP: 0 1 2 3 CCD POWER ON/OFF: OFF OFF OFF ON AREA DISC IN/OUT: OUT OUT OUT OUT AREA DISC H START: 6 6 6 6 AREA DISC H STOP: 425 425 425 103 AREA DISC V START: 2 2 2 2 AREA DISC V STOP: 422 422 422 422 reading att file: ./fa970325_1338.0040 making an exposure map... Aspect RA/DEC/ROLL : 254.4330 35.3094 278.6149 Mean RA/DEC/ROLL : 254.4303 35.2927 278.6149 Pnt RA/DEC/ROLL : 254.4382 35.3211 278.6149 Image rebin factor : 4 Attitude Records : 25893 Hot Pixels : 11 GTI intervals : 2 Total GTI (secs) : 1059.828 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 1059.8281250 1059.8281250 100 Percent Complete: Total/live time: 1059.8281250 1059.8281250 Number of attitude steps used: 2 Number of attitude steps avail: 283 Mean RA/DEC pixel offset: -36.3598 -10.4565 writing expo file: ad11502010s101002m.expo closing attitude file... closing data file...-> Generating low and high energy images for ad11502010s101002m.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad11502010s101002m Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 20:50:00 0.11E+04 2313 0001 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s101002m.evt Total Good Bad: Region Time Phase Cut 2313 2313 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 2313 2313 0 0 0 0 in 1059.83 seconds Image has 2313 counts for 2.182 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s101002m.evt Total Good Bad: Region Time Phase Cut 2313 1147 0 0 0 1166 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 2313 1147 0 0 0 1166 in 1059.83 seconds Image has 1147 counts for 1.082 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s101002m.evt Total Good Bad: Region Time Phase Cut 2313 1167 0 0 0 1146 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 2313 1167 0 0 0 1146 in 1059.83 seconds Image has 1167 counts for 1.101 counts/sec Command not found; type ? for a command listing !ad11502010s101002m:ASCA > !ad11502010s101002m:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad11502010s101002m:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !ad11502010s101002m:ASCA > read events ad11502010s101002m.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !ad11502010s101002m:ASCA-SIS1-BRIGHT > set image sky !ad11502010s101002m:ASCA-SIS1-BRIGHT > filter region corner_point.reg !ad11502010s101002m:ASCA-SIS1-BRIGHT > extract image !ad11502010s101002m:ASCA-SIS1-BRIGHT > save image outfile=ad11502010s101002m.img Wrote image to file ad11502010s101002m.img !ad11502010s101002m:ASCA-SIS1-BRIGHT > filter pha_cut 0 547 !ad11502010s101002m:ASCA-SIS1-BRIGHT > extract image !ad11502010s101002m:ASCA-SIS1-BRIGHT > save image outfile=ad11502010s101002m_lo.img Wrote image to file ad11502010s101002m_lo.img !ad11502010s101002m:ASCA-SIS1-BRIGHT > clear pha_cut !ad11502010s101002m:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048 Warning: your PI upper bound: 2048 is above the maximum value. !ad11502010s101002m:ASCA-SIS1-BRIGHT > extract image !ad11502010s101002m:ASCA-SIS1-BRIGHT > save image outfile=ad11502010s101002m_hi.img Wrote image to file ad11502010s101002m_hi.img !ad11502010s101002m:ASCA-SIS1-BRIGHT > exit save_session=no-> Generating exposure map ad11502010s101102h.expo
ASCAEXPO_V0.9b reading data file: ad11502010s101102h.evt reading gti ext: STDGTI reading hp ext: HOT_PIXELS reading cal file: s1_teldef_ascalin.fits making an inst map... SIS AREA DISC ENABL OFF CHIP: 0 1 2 3 CCD POWER ON/OFF: ON OFF OFF OFF AREA DISC IN/OUT: OUT OUT OUT OUT AREA DISC H START: 6 6 6 6 AREA DISC H STOP: 425 425 425 103 AREA DISC V START: 2 2 2 2 AREA DISC V STOP: 422 422 422 422 reading att file: ./fa970325_1338.0040 making an exposure map... Aspect RA/DEC/ROLL : 254.4330 35.3094 278.6134 Mean RA/DEC/ROLL : 254.4298 35.2941 278.6134 Pnt RA/DEC/ROLL : 254.4407 35.3198 278.6134 Image rebin factor : 4 Attitude Records : 25893 Hot Pixels : 20 GTI intervals : 3 Total GTI (secs) : 1233.896 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 334.9613342 334.9613342 20 Percent Complete: Total/live time: 334.9613342 334.9613342 30 Percent Complete: Total/live time: 534.4607544 534.4607544 40 Percent Complete: Total/live time: 534.4607544 534.4607544 50 Percent Complete: Total/live time: 1233.8962402 1233.8962402 100 Percent Complete: Total/live time: 1233.8962402 1233.8962402 Number of attitude steps used: 4 Number of attitude steps avail: 2565 Mean RA/DEC pixel offset: -50.0187 -16.5907 writing expo file: ad11502010s101102h.expo closing attitude file... closing data file...-> Generating low and high energy images for ad11502010s101102h.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad11502010s101102h Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 17:07:20 0.12E+04 2594 1000 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s101102h.evt Total Good Bad: Region Time Phase Cut 2594 2594 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 2594 2594 0 0 0 0 in 1233.90 seconds Image has 2594 counts for 2.102 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s101102h.evt Total Good Bad: Region Time Phase Cut 2594 1266 0 0 0 1328 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 2594 1266 0 0 0 1328 in 1233.90 seconds Image has 1266 counts for 1.026 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s101102h.evt Total Good Bad: Region Time Phase Cut 2594 1328 0 0 0 1266 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 2594 1328 0 0 0 1266 in 1233.90 seconds Image has 1328 counts for 1.076 counts/sec Command not found; type ? for a command listing !ad11502010s101102h:ASCA > !ad11502010s101102h:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad11502010s101102h:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !ad11502010s101102h:ASCA > read events ad11502010s101102h.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !ad11502010s101102h:ASCA-SIS1-BRIGHT > set image sky !ad11502010s101102h:ASCA-SIS1-BRIGHT > filter region corner_point.reg !ad11502010s101102h:ASCA-SIS1-BRIGHT > extract image !ad11502010s101102h:ASCA-SIS1-BRIGHT > save image outfile=ad11502010s101102h.img Wrote image to file ad11502010s101102h.img !ad11502010s101102h:ASCA-SIS1-BRIGHT > filter pha_cut 0 547 !ad11502010s101102h:ASCA-SIS1-BRIGHT > extract image !ad11502010s101102h:ASCA-SIS1-BRIGHT > save image outfile=ad11502010s101102h_lo.img Wrote image to file ad11502010s101102h_lo.img !ad11502010s101102h:ASCA-SIS1-BRIGHT > clear pha_cut !ad11502010s101102h:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048 Warning: your PI upper bound: 2048 is above the maximum value. !ad11502010s101102h:ASCA-SIS1-BRIGHT > extract image !ad11502010s101102h:ASCA-SIS1-BRIGHT > save image outfile=ad11502010s101102h_hi.img Wrote image to file ad11502010s101102h_hi.img !ad11502010s101102h:ASCA-SIS1-BRIGHT > exit save_session=no-> Summing sis images
ad11502010s000102h.expo ad11502010s000202m.expo ad11502010s000302m.expo ad11502010s000402m.expo ad11502010s000502h.expo ad11502010s000802h.expo ad11502010s001002h.expo ad11502010s001102m.expo ad11502010s100102h.expo ad11502010s100202m.expo ad11502010s100302m.expo ad11502010s100402h.expo ad11502010s100502m.expo ad11502010s100802h.expo ad11502010s101002m.expo ad11502010s101102h.expo-> Summing the following images to produce ad11502010sis32002_all.totsky
ad11502010s000102h.img ad11502010s000202m.img ad11502010s000302m.img ad11502010s000402m.img ad11502010s000502h.img ad11502010s000802h.img ad11502010s001002h.img ad11502010s001102m.img ad11502010s100102h.img ad11502010s100202m.img ad11502010s100302m.img ad11502010s100402h.img ad11502010s100502m.img ad11502010s100802h.img ad11502010s101002m.img ad11502010s101102h.img-> Summing the following images to produce ad11502010sis32002_lo.totsky
ad11502010s000102h_lo.img ad11502010s000202m_lo.img ad11502010s000302m_lo.img ad11502010s000402m_lo.img ad11502010s000502h_lo.img ad11502010s000802h_lo.img ad11502010s001002h_lo.img ad11502010s001102m_lo.img ad11502010s100102h_lo.img ad11502010s100202m_lo.img ad11502010s100302m_lo.img ad11502010s100402h_lo.img ad11502010s100502m_lo.img ad11502010s100802h_lo.img ad11502010s101002m_lo.img ad11502010s101102h_lo.img-> Summing the following images to produce ad11502010sis32002_hi.totsky
ad11502010s000102h_hi.img ad11502010s000202m_hi.img ad11502010s000302m_hi.img ad11502010s000402m_hi.img ad11502010s000502h_hi.img ad11502010s000802h_hi.img ad11502010s001002h_hi.img ad11502010s001102m_hi.img ad11502010s100102h_hi.img ad11502010s100202m_hi.img ad11502010s100302m_hi.img ad11502010s100402h_hi.img ad11502010s100502m_hi.img ad11502010s100802h_hi.img ad11502010s101002m_hi.img ad11502010s101102h_hi.img-> Running XIMAGE to create ad11502010sis32002.gif
No of detectors read in: 20 ![1]XIMAGE> read/fits ad11502010sis32002_all.totsky Reading an image Telescope ASCA SIS0 Image display size = 320 Done, closing file Largest, Smallest 1474.00 0. Bscale, Bzero from file 1.0000000000000 0. After internal scaling Bscale and Bzero 1.0000000000000 0. Image level, max: 1474 min: 0 ![2]XIMAGE> read/exp_map ad11502010sis32002.totexpo Reading an image Telescope ASCA SIS0 Image display size = 320 Done, closing file Largest, Smallest 195.898 0. Bscale, Bzero from file 1.0000000000000 0. After internal scaling Bscale and Bzero 1.0000000000000 0. Image level, max: 195 min: 0 ![3]XIMAGE> smooth ![4]XIMAGE> cpd /ppm ![5]XIMAGE> cey 2000 ![6]XIMAGE> disp/correct/noframe Displaying image The image is exposure corrected Min = 0 max = 32767 ![7]XIMAGE> grid ![8]XIMAGE> scale scal_f, min_inten 1.00000 0. i,inten,mm,pp 1 0. 0 0 i,inten,mm,pp 2 6.00000 60 -1 i,inten,mm,pp 3 22.0000 22 0 i,inten,mm,pp 4 109.000 109 0 ![9]XIMAGE> exit-> Summing gis images
ad11502010g200170h.expo ad11502010g200270m.expo ad11502010g200370l.expo ad11502010g200470l.expo ad11502010g300170h.expo ad11502010g300270m.expo ad11502010g300370l.expo ad11502010g300470l.expo-> Summing the following images to produce ad11502010gis25670_all.totsky
ad11502010g200170h.img ad11502010g200270m.img ad11502010g200370l.img ad11502010g200470l.img ad11502010g300170h.img ad11502010g300270m.img ad11502010g300370l.img ad11502010g300470l.img-> Summing the following images to produce ad11502010gis25670_lo.totsky
ad11502010g200170h_lo.img ad11502010g200270m_lo.img ad11502010g200370l_lo.img ad11502010g200470l_lo.img ad11502010g300170h_lo.img ad11502010g300270m_lo.img ad11502010g300370l_lo.img ad11502010g300470l_lo.img-> Summing the following images to produce ad11502010gis25670_hi.totsky
ad11502010g200170h_hi.img ad11502010g200270m_hi.img ad11502010g200370l_hi.img ad11502010g200470l_hi.img ad11502010g300170h_hi.img ad11502010g300270m_hi.img ad11502010g300370l_hi.img ad11502010g300470l_hi.img-> Running XIMAGE to create ad11502010gis25670.gif
No of detectors read in: 20 ![1]XIMAGE> read/fits ad11502010gis25670_all.totsky Reading an image Telescope ASCA GIS2 Image display size = 256 Done, closing file Largest, Smallest 7553.00 0. Bscale, Bzero from file 1.0000000000000 0. After internal scaling Bscale and Bzero 1.0000000000000 0. Image level, max: 7553 min: 0 ![2]XIMAGE> read/exp_map ad11502010gis25670.totexpo Reading an image Telescope ASCA GIS2 Image display size = 256 Done, closing file Largest, Smallest 682.635 0. Bscale, Bzero from file 1.0000000000000 0. After internal scaling Bscale and Bzero 1.0000000000000 0. Image level, max: 682 min: 0 ![3]XIMAGE> smooth ![4]XIMAGE> cpd /ppm ![5]XIMAGE> cey 2000 ![6]XIMAGE> disp/correct/noframe Displaying image The image is exposure corrected Min = 0 max = 32767 ![7]XIMAGE> grid ![8]XIMAGE> scale scal_f, min_inten 1.00000 0. i,inten,mm,pp 1 0. 0 0 i,inten,mm,pp 2 4.00000 40 -1 i,inten,mm,pp 3 12.0000 12 0 i,inten,mm,pp 4 59.0000 59 0 ![9]XIMAGE> exit
122 136 0.143518 95 7 4125.87-> Smoothing ad11502010gis25670_hi.totsky with ad11502010gis25670.totexpo
122 136 0.0998527 95 7 3835.67-> Smoothing ad11502010gis25670_lo.totsky with ad11502010gis25670.totexpo
122 136 0.0441209 95 8 4570.59-> Determining extraction radii
122 136 24 F-> Standard Output From STOOL colorpic:
color plane 0 color plane 1 color plane 2 writing image image written-> Creating fits catalog of sources: ad11502010gis25670.src
141 178 0.0997693 162 10 4575.43-> Smoothing ad11502010sis32002_hi.totsky with ad11502010sis32002.totexpo
141 178 0.0509151 162 9 3273.72-> Smoothing ad11502010sis32002_lo.totsky with ad11502010sis32002.totexpo
141 178 0.0489488 162 11 6760.41-> Determining extraction radii
141 178 38 F-> Standard Output From STOOL colorpic:
color plane 0 color plane 1 color plane 2 writing image image written-> Creating fits catalog of sources: ad11502010sis32002.src
The sum of the selected column is 386162.00 The mean of the selected column is 665.79655 The standard deviation of the selected column is 1.4336163 The minimum of selected column is 662.00000 The maximum of selected column is 669.00000 The number of points used in calculation is 580-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 395402.00 The mean of the selected column is 681.72759 The standard deviation of the selected column is 1.9848122 The minimum of selected column is 676.00000 The maximum of selected column is 688.00000 The number of points used in calculation is 580-> Converting (564.0,712.0,2.0) to s1 detector coordinates
The sum of the selected column is 384198.00 The mean of the selected column is 663.55440 The standard deviation of the selected column is 1.3751604 The minimum of selected column is 660.00000 The maximum of selected column is 667.00000 The number of points used in calculation is 579-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 415577.00 The mean of the selected column is 717.74957 The standard deviation of the selected column is 1.9942336 The minimum of selected column is 712.00000 The maximum of selected column is 723.00000 The number of points used in calculation is 579-> Converting (122.0,136.0,2.0) to g2 detector coordinates
The sum of the selected column is 5038111.0 The mean of the selected column is 128.41514 The standard deviation of the selected column is 1.0787896 The minimum of selected column is 125.00000 The maximum of selected column is 131.00000 The number of points used in calculation is 39233-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 5319453.0 The mean of the selected column is 135.58619 The standard deviation of the selected column is 1.1392271 The minimum of selected column is 132.00000 The maximum of selected column is 140.00000 The number of points used in calculation is 39233-> Converting (122.0,136.0,2.0) to g3 detector coordinates
The sum of the selected column is 5747285.0 The mean of the selected column is 134.31374 The standard deviation of the selected column is 1.0660820 The minimum of selected column is 131.00000 The maximum of selected column is 137.00000 The number of points used in calculation is 42790-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 5819271.0 The mean of the selected column is 135.99605 The standard deviation of the selected column is 1.0995712 The minimum of selected column is 133.00000 The maximum of selected column is 140.00000 The number of points used in calculation is 42790
1 ad11502010s000102h.evt 119477 1 ad11502010s000202m.evt 119477 2 ad11502010s000402m.evt 32141 2 ad11502010s001002h.evt 32141 3 ad11502010s000302m.evt 30824 3 ad11502010s000502h.evt 30824 4 ad11502010s000802h.evt 16656 4 ad11502010s001102m.evt 16656-> Fetching SIS0_NOTCHIP0.1
ad11502010s000102h.evt ad11502010s000202m.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.38E+04 77323 0001 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.38E+04 77323 0001 2 HERC_X-1 BRIGHT MEDIUM 25/03/97 19:15:20 0.21E+04 42154 0001 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000102h.evt Total Good Bad: Region Time Phase Cut 77323 68480 8843 0 0 0 Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000202m.evt Total Good Bad: Region Time Phase Cut 42154 37455 4699 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 119477 105935 13542 0 0 0 in 5907.88 seconds Spectrum has 105935 counts for 17.93 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS0 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 5907.9 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 1.63379E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... QUALITY ... ... ------- ... QUALITY ... ------- ... Bad Channels (Channel - Channel) ... --------------------------------------------- ... 0 - 15 have quality 5 ... --------------------------------------------- ... ...... exiting, changes written to file : ad11502010s010102_1.pi Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010s000102h.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS0-BRIGHT > read events ad11502010s000202m.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 2 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS0-BRIGHT > set phaname PI !xsel:ASCA-SIS0-BRIGHT > filter region ad11502010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP0.1 !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP1.1 !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP2.1 !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.1 !xsel:ASCA-SIS0-BRIGHT > filter region ad11502010s010102.discrim !xsel:ASCA-SIS0-BRIGHT > extract spectrum !xsel:ASCA-SIS0-BRIGHT > save spectrum ad11502010s010102_1.pi group=yes Wrote spectrum to ad11502010s010102_1.pi !xsel:ASCA-SIS0-BRIGHT > exit save_session=no-> Grouping ad11502010s010102_1.pi to 40 counts/bin
------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS0 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 5907.9 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 1.63379E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 15 of undefined grouping (Channel quality=bad) ... 16 - 253 are single channels ... 254 - 255 are grouped by a factor 2 ... 256 - 261 are single channels ... 262 - 263 are grouped by a factor 2 ... 264 - 265 are single channels ... 266 - 289 are grouped by a factor 2 ... 290 - 292 are grouped by a factor 3 ... 293 - 296 are grouped by a factor 2 ... 297 - 299 are grouped by a factor 3 ... 300 - 301 are grouped by a factor 2 ... 302 - 322 are grouped by a factor 3 ... 323 - 326 are grouped by a factor 4 ... 327 - 331 are grouped by a factor 5 ... 332 - 335 are grouped by a factor 4 ... 336 - 340 are grouped by a factor 5 ... 341 - 348 are grouped by a factor 8 ... 349 - 355 are grouped by a factor 7 ... 356 - 364 are grouped by a factor 9 ... 365 - 376 are grouped by a factor 12 ... 377 - 389 are grouped by a factor 13 ... 390 - 405 are grouped by a factor 16 ... --------------------------------------------- ... ...... exiting, changes written to file : ad11502010s010102_1.pi ** grppha 2.6.0 completed successfully-> Source occupies chip(s) 3
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x512 S0C3 Bright PI RMF Calibration data from ./ Please stand by... ...Done.-> Generating ad11502010s010102_1.arf with point=yes
ASCAARF vers 2.72 14 Mar 1997. Input WMAP array has size 23 by 24 bins expanded to 23 by 24 bins First WMAP bin is at detector pixel 648 656 8 detector pixels per WMAP bin WMAP bin size is 0.21600 mm 0.21216 arcmin Selected region size is 18.826 arcmin^2 Optical axis is detector pixel 662.72 559.02 1180 energies from RMF file Effective area fudge applied Arf filter applied Point source at 743.00 755.00 (detector coordinates) Point source at -10.03 -24.50 (WMAP bins wrt optical axis) Point source at 5.62 247.73 (... in polar coordinates) Total counts in region = 1.05890E+05 Weighted mean angle from optical axis = 4.180 arcmin-> SIS0_NOTCHIP0.1 already present in current directory
ad11502010s000402m.evt ad11502010s001002h.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 17:30:16 0.46E+04 24541 0010 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 17:30:16 0.46E+04 24541 0010 2 HERC_X-1 BRIGHT HIGH 25/03/97 17:07:20 0.13E+04 7600 0010 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000402m.evt Total Good Bad: Region Time Phase Cut 24541 13607 10934 0 0 0 Doing file: /data/data15/seq_proc/11502010.006/ad11502010s001002h.evt Total Good Bad: Region Time Phase Cut 7600 4296 3304 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 32141 17903 14238 0 0 0 in 5879.94 seconds Spectrum has 17903 counts for 3.045 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS0 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 5879.9 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 7.42187E-03 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... QUALITY ... ... ------- ... QUALITY ... ------- ... Bad Channels (Channel - Channel) ... --------------------------------------------- ... 0 - 15 have quality 5 ... --------------------------------------------- ... ...... exiting, changes written to file : ad11502010s010202_1.pi Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010s000402m.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS0-BRIGHT > read events ad11502010s001002h.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 2 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS0-BRIGHT > set phaname PI !xsel:ASCA-SIS0-BRIGHT > filter region ad11502010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP0.1 !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP1.1 !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP3.1 !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.1 !xsel:ASCA-SIS0-BRIGHT > filter region ad11502010s010202.discrim !xsel:ASCA-SIS0-BRIGHT > extract spectrum !xsel:ASCA-SIS0-BRIGHT > save spectrum ad11502010s010202_1.pi group=yes Wrote spectrum to ad11502010s010202_1.pi !xsel:ASCA-SIS0-BRIGHT > exit save_session=no-> Grouping ad11502010s010202_1.pi to 40 counts/bin
------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS0 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 5879.9 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 7.42187E-03 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 15 of undefined grouping (Channel quality=bad) ... 16 - 154 are single channels ... 155 - 156 are grouped by a factor 2 ... 157 - 157 are single channels ... 158 - 159 are grouped by a factor 2 ... 160 - 160 are single channels ... 161 - 162 are grouped by a factor 2 ... 163 - 163 are single channels ... 164 - 167 are grouped by a factor 2 ... 168 - 169 are single channels ... 170 - 203 are grouped by a factor 2 ... 204 - 206 are grouped by a factor 3 ... 207 - 208 are grouped by a factor 2 ... 209 - 211 are grouped by a factor 3 ... 212 - 213 are grouped by a factor 2 ... 214 - 216 are grouped by a factor 3 ... 217 - 218 are grouped by a factor 2 ... 219 - 221 are grouped by a factor 3 ... 222 - 223 are grouped by a factor 2 ... 224 - 232 are grouped by a factor 3 ... 233 - 244 are grouped by a factor 4 ... 245 - 249 are grouped by a factor 5 ... 250 - 255 are grouped by a factor 6 ... 256 - 260 are grouped by a factor 5 ... 261 - 276 are grouped by a factor 8 ... 277 - 286 are grouped by a factor 10 ... 287 - 297 are grouped by a factor 11 ... 298 - 313 are grouped by a factor 16 ... 314 - 334 are grouped by a factor 21 ... 335 - 376 are grouped by a factor 42 ... 377 - 511 of undefined grouping (Channel quality=bad) ... --------------------------------------------- ... ...... exiting, changes written to file : ad11502010s010202_1.pi ** grppha 2.6.0 completed successfully-> Source occupies chip(s) 2
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x512 S0C2 Bright PI RMF Calibration data from ./ Please stand by... ...Done.-> Generating ad11502010s010202_1.arf with point=yes
ASCAARF vers 2.72 14 Mar 1997. Input WMAP array has size 21 by 13 bins expanded to 21 by 13 bins First WMAP bin is at detector pixel 648 528 8 detector pixels per WMAP bin WMAP bin size is 0.21600 mm 0.21216 arcmin Selected region size is 8.5523 arcmin^2 Optical axis is detector pixel 662.72 559.02 1180 energies from RMF file Effective area fudge applied Arf filter applied Point source at 735.00 583.00 (detector coordinates) Point source at -9.03 -3.00 (WMAP bins wrt optical axis) Point source at 2.02 198.36 (... in polar coordinates) Total counts in region = 1.78780E+04 Weighted mean angle from optical axis = 2.059 arcmin-> SIS0_NOTCHIP1.1 already present in current directory
ad11502010s000302m.evt ad11502010s000502h.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 13:39:04 0.17E+04 14468 1000 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 13:39:04 0.17E+04 14468 1000 2 HERC_X-1 BRIGHT HIGH 25/03/97 14:00:08 0.18E+04 16356 1000 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000302m.evt Total Good Bad: Region Time Phase Cut 14468 11452 3016 0 0 0 Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000502h.evt Total Good Bad: Region Time Phase Cut 16356 12903 3453 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 30824 24355 6469 0 0 0 in 3510.86 seconds Spectrum has 24355 counts for 6.937 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS0 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 3510.9 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 1.09277E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... QUALITY ... ... ------- ... QUALITY ... ------- ... Bad Channels (Channel - Channel) ... --------------------------------------------- ... 0 - 15 have quality 5 ... --------------------------------------------- ... ...... exiting, changes written to file : ad11502010s010302_1.pi Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010s000302m.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS0-BRIGHT > read events ad11502010s000502h.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 2 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS0-BRIGHT > set phaname PI !xsel:ASCA-SIS0-BRIGHT > filter region ad11502010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP1.1 !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP2.1 !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP3.1 !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.1 !xsel:ASCA-SIS0-BRIGHT > filter region ad11502010s010302.discrim !xsel:ASCA-SIS0-BRIGHT > extract spectrum !xsel:ASCA-SIS0-BRIGHT > save spectrum ad11502010s010302_1.pi group=yes Wrote spectrum to ad11502010s010302_1.pi !xsel:ASCA-SIS0-BRIGHT > exit save_session=no-> Grouping ad11502010s010302_1.pi to 40 counts/bin
------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS0 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 3510.9 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 1.09277E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 15 of undefined grouping (Channel quality=bad) ... 16 - 165 are single channels ... 166 - 167 are grouped by a factor 2 ... 168 - 178 are single channels ... 179 - 184 are grouped by a factor 2 ... 185 - 185 are single channels ... 186 - 187 are grouped by a factor 2 ... 188 - 188 are single channels ... 189 - 192 are grouped by a factor 2 ... 193 - 193 are single channels ... 194 - 223 are grouped by a factor 2 ... 224 - 226 are grouped by a factor 3 ... 227 - 228 are grouped by a factor 2 ... 229 - 237 are grouped by a factor 3 ... 238 - 241 are grouped by a factor 4 ... 242 - 243 are grouped by a factor 2 ... 244 - 246 are grouped by a factor 3 ... 247 - 254 are grouped by a factor 4 ... 255 - 275 are grouped by a factor 7 ... 276 - 284 are grouped by a factor 9 ... 285 - 295 are grouped by a factor 11 ... 296 - 308 are grouped by a factor 13 ... 309 - 323 are grouped by a factor 15 ... 324 - 352 are grouped by a factor 29 ... 353 - 511 of undefined grouping (Channel quality=bad) ... --------------------------------------------- ... ...... exiting, changes written to file : ad11502010s010302_1.pi ** grppha 2.6.0 completed successfully-> Source occupies chip(s) 0
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x512 S0C0 Bright PI RMF Calibration data from ./ Please stand by... ...Done.-> Generating ad11502010s010302_1.arf with point=yes
ASCAARF vers 2.72 14 Mar 1997. Input WMAP array has size 17 by 23 bins expanded to 17 by 23 bins First WMAP bin is at detector pixel 512 656 8 detector pixels per WMAP bin WMAP bin size is 0.21600 mm 0.21216 arcmin Selected region size is 12.592 arcmin^2 Optical axis is detector pixel 662.72 559.02 1180 energies from RMF file Effective area fudge applied Arf filter applied Point source at 583.00 751.00 (detector coordinates) Point source at 9.97 -24.00 (WMAP bins wrt optical axis) Point source at 5.51 292.55 (... in polar coordinates) Total counts in region = 2.43250E+04 Weighted mean angle from optical axis = 4.554 arcmin-> SIS0_NOTCHIP0.1 already present in current directory
ad11502010s000802h.evt ad11502010s001102m.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 15:32:24 0.29E+04 12182 0100 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 15:32:24 0.29E+04 12182 0100 2 HERC_X-1 BRIGHT MEDIUM 25/03/97 20:50:00 0.11E+04 4474 0100 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000802h.evt Total Good Bad: Region Time Phase Cut 12182 5672 6510 0 0 0 Doing file: /data/data15/seq_proc/11502010.006/ad11502010s001102m.evt Total Good Bad: Region Time Phase Cut 4474 2039 2435 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 16656 7711 8945 0 0 0 in 3945.74 seconds Spectrum has 7711 counts for 1.954 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS0 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 3945.7 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 4.11133E-03 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... QUALITY ... ... ------- ... QUALITY ... ------- ... Bad Channels (Channel - Channel) ... --------------------------------------------- ... 0 - 15 have quality 5 ... --------------------------------------------- ... ...... exiting, changes written to file : ad11502010s010402_1.pi Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010s000802h.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS0-BRIGHT > read events ad11502010s001102m.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 2 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS0-BRIGHT > set phaname PI !xsel:ASCA-SIS0-BRIGHT > filter region ad11502010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP0.1 !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP2.1 !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP3.1 !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.1 !xsel:ASCA-SIS0-BRIGHT > filter region ad11502010s010402.discrim !xsel:ASCA-SIS0-BRIGHT > extract spectrum !xsel:ASCA-SIS0-BRIGHT > save spectrum ad11502010s010402_1.pi group=yes Wrote spectrum to ad11502010s010402_1.pi !xsel:ASCA-SIS0-BRIGHT > exit save_session=no-> Grouping ad11502010s010402_1.pi to 40 counts/bin
------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS0 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 3945.7 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 4.11133E-03 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 15 of undefined grouping (Channel quality=bad) ... 16 - 18 are single channels ... 19 - 20 are grouped by a factor 2 ... 21 - 71 are single channels ... 72 - 75 are grouped by a factor 2 ... 76 - 76 are single channels ... 77 - 118 are grouped by a factor 2 ... 119 - 119 are single channels ... 120 - 127 are grouped by a factor 2 ... 128 - 130 are grouped by a factor 3 ... 131 - 136 are grouped by a factor 2 ... 137 - 139 are grouped by a factor 3 ... 140 - 143 are grouped by a factor 2 ... 144 - 158 are grouped by a factor 3 ... 159 - 162 are grouped by a factor 4 ... 163 - 174 are grouped by a factor 3 ... 175 - 178 are grouped by a factor 4 ... 179 - 184 are grouped by a factor 3 ... 185 - 196 are grouped by a factor 4 ... 197 - 201 are grouped by a factor 5 ... 202 - 205 are grouped by a factor 4 ... 206 - 215 are grouped by a factor 5 ... 216 - 227 are grouped by a factor 6 ... 228 - 235 are grouped by a factor 8 ... 236 - 244 are grouped by a factor 9 ... 245 - 258 are grouped by a factor 14 ... 259 - 277 are grouped by a factor 19 ... 278 - 307 are grouped by a factor 30 ... 308 - 390 are grouped by a factor 83 ... 391 - 511 of undefined grouping (Channel quality=bad) ... --------------------------------------------- ... ...... exiting, changes written to file : ad11502010s010402_1.pi ** grppha 2.6.0 completed successfully-> Source occupies chip(s) 1
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x512 S0C1 Bright PI RMF Calibration data from ./ Please stand by... ...Done.-> Generating ad11502010s010402_1.arf with point=yes
ASCAARF vers 2.72 14 Mar 1997. Input WMAP array has size 15 by 12 bins expanded to 15 by 12 bins First WMAP bin is at detector pixel 528 536 8 detector pixels per WMAP bin WMAP bin size is 0.21600 mm 0.21216 arcmin Selected region size is 4.7375 arcmin^2 Optical axis is detector pixel 662.72 559.02 1180 energies from RMF file Effective area fudge applied Arf filter applied Point source at 591.00 587.00 (detector coordinates) Point source at 8.97 -3.50 (WMAP bins wrt optical axis) Point source at 2.04 338.69 (... in polar coordinates) Total counts in region = 7.68500E+03 Weighted mean angle from optical axis = 1.837 arcmin-> Standard Output From STOOL group_event_files:
1 ad11502010s100102h.evt 144414 1 ad11502010s100202m.evt 144414 2 ad11502010s100302m.evt 52945 2 ad11502010s100402h.evt 52945 3 ad11502010s100502m.evt 11825 3 ad11502010s101102h.evt 11825 4 ad11502010s100802h.evt 8183 4 ad11502010s101002m.evt 8183-> Fetching SIS1_NOTCHIP0.1
ad11502010s100102h.evt ad11502010s100202m.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.37E+04 96199 0100 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.37E+04 96199 0100 2 HERC_X-1 BRIGHT MEDIUM 25/03/97 19:15:20 0.21E+04 48215 0100 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100102h.evt Total Good Bad: Region Time Phase Cut 96199 87489 8710 0 0 0 Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100202m.evt Total Good Bad: Region Time Phase Cut 48215 43526 4689 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 144414 131015 13399 0 0 0 in 5845.91 seconds Spectrum has 131015 counts for 22.41 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS1 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 5845.9 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.00684E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... QUALITY ... ... ------- ... QUALITY ... ------- ... Bad Channels (Channel - Channel) ... --------------------------------------------- ... 0 - 15 have quality 5 ... --------------------------------------------- ... ...... exiting, changes written to file : ad11502010s110102_1.pi Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010s100102h.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS1-BRIGHT > read events ad11502010s100202m.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 2 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS1-BRIGHT > set phaname PI !xsel:ASCA-SIS1-BRIGHT > filter region ad11502010s132002_1.reg !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP0.1 !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP2.1 !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP3.1 !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.1 !xsel:ASCA-SIS1-BRIGHT > filter region ad11502010s110102.discrim !xsel:ASCA-SIS1-BRIGHT > extract spectrum !xsel:ASCA-SIS1-BRIGHT > save spectrum ad11502010s110102_1.pi group=yes Wrote spectrum to ad11502010s110102_1.pi !xsel:ASCA-SIS1-BRIGHT > exit save_session=no-> Grouping ad11502010s110102_1.pi to 40 counts/bin
------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS1 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 5845.9 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.00684E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 15 of undefined grouping (Channel quality=bad) ... 16 - 276 are single channels ... 277 - 278 are grouped by a factor 2 ... 279 - 280 are single channels ... 281 - 284 are grouped by a factor 2 ... 285 - 287 are single channels ... 288 - 307 are grouped by a factor 2 ... 308 - 313 are grouped by a factor 3 ... 314 - 317 are grouped by a factor 2 ... 318 - 321 are grouped by a factor 4 ... 322 - 327 are grouped by a factor 3 ... 328 - 347 are grouped by a factor 4 ... 348 - 357 are grouped by a factor 5 ... 358 - 369 are grouped by a factor 6 ... 370 - 374 are grouped by a factor 5 ... 375 - 383 are grouped by a factor 9 ... 384 - 398 are grouped by a factor 15 ... 399 - 420 are grouped by a factor 22 ... --------------------------------------------- ... ...... exiting, changes written to file : ad11502010s110102_1.pi ** grppha 2.6.0 completed successfully-> Source occupies chip(s) 1
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x512 S1C1 Bright PI RMF Calibration data from ./ Please stand by... ...Done.-> Generating ad11502010s110102_1.arf with point=yes
ASCAARF vers 2.72 14 Mar 1997. Input WMAP array has size 23 by 28 bins expanded to 23 by 28 bins First WMAP bin is at detector pixel 648 656 8 detector pixels per WMAP bin WMAP bin size is 0.21600 mm 0.21216 arcmin Selected region size is 23.125 arcmin^2 Optical axis is detector pixel 618.28 773.83 1180 energies from RMF file Effective area fudge applied Arf filter applied Point source at 743.00 771.00 (detector coordinates) Point source at -15.59 0.35 (WMAP bins wrt optical axis) Point source at 3.31 178.70 (... in polar coordinates) Total counts in region = 1.30966E+05 Weighted mean angle from optical axis = 2.586 arcmin-> SIS1_NOTCHIP0.1 already present in current directory
ad11502010s100302m.evt ad11502010s100402h.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 13:39:04 0.17E+04 25917 0010 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 13:39:04 0.17E+04 25917 0010 2 HERC_X-1 BRIGHT HIGH 25/03/97 14:00:08 0.18E+04 27028 0010 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100302m.evt Total Good Bad: Region Time Phase Cut 25917 20072 5845 0 0 0 Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100402h.evt Total Good Bad: Region Time Phase Cut 27028 20960 6068 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 52945 41032 11913 0 0 0 in 3470.71 seconds Spectrum has 41032 counts for 11.82 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS1 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 3470.7 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 1.34961E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... QUALITY ... ... ------- ... QUALITY ... ------- ... Bad Channels (Channel - Channel) ... --------------------------------------------- ... 0 - 15 have quality 5 ... --------------------------------------------- ... ...... exiting, changes written to file : ad11502010s110202_1.pi Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010s100302m.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS1-BRIGHT > read events ad11502010s100402h.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 2 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS1-BRIGHT > set phaname PI !xsel:ASCA-SIS1-BRIGHT > filter region ad11502010s132002_1.reg !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP0.1 !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP1.1 !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP3.1 !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.1 !xsel:ASCA-SIS1-BRIGHT > filter region ad11502010s110202.discrim !xsel:ASCA-SIS1-BRIGHT > extract spectrum !xsel:ASCA-SIS1-BRIGHT > save spectrum ad11502010s110202_1.pi group=yes Wrote spectrum to ad11502010s110202_1.pi !xsel:ASCA-SIS1-BRIGHT > exit save_session=no-> Grouping ad11502010s110202_1.pi to 40 counts/bin
------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS1 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 3470.7 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 1.34961E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 15 of undefined grouping (Channel quality=bad) ... 16 - 222 are single channels ... 223 - 224 are grouped by a factor 2 ... 225 - 226 are single channels ... 227 - 250 are grouped by a factor 2 ... 251 - 256 are grouped by a factor 3 ... 257 - 262 are grouped by a factor 2 ... 263 - 268 are grouped by a factor 3 ... 269 - 272 are grouped by a factor 4 ... 273 - 275 are grouped by a factor 3 ... 276 - 279 are grouped by a factor 4 ... 280 - 282 are grouped by a factor 3 ... 283 - 287 are grouped by a factor 5 ... 288 - 291 are grouped by a factor 4 ... 292 - 296 are grouped by a factor 5 ... 297 - 303 are grouped by a factor 7 ... 304 - 309 are grouped by a factor 6 ... 310 - 316 are grouped by a factor 7 ... 317 - 324 are grouped by a factor 8 ... 325 - 333 are grouped by a factor 9 ... 334 - 345 are grouped by a factor 12 ... 346 - 359 are grouped by a factor 14 ... 360 - 379 are grouped by a factor 20 ... 380 - 426 are grouped by a factor 47 ... 427 - 511 of undefined grouping (Channel quality=bad) ... --------------------------------------------- ... ...... exiting, changes written to file : ad11502010s110202_1.pi ** grppha 2.6.0 completed successfully-> Source occupies chip(s) 2
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x512 S1C2 Bright PI RMF Calibration data from ./ Please stand by... ...Done.-> Generating ad11502010s110202_1.arf with point=yes
ASCAARF vers 2.72 14 Mar 1997. Input WMAP array has size 17 by 28 bins expanded to 17 by 28 bins First WMAP bin is at detector pixel 512 656 8 detector pixels per WMAP bin WMAP bin size is 0.21600 mm 0.21216 arcmin Selected region size is 15.552 arcmin^2 Optical axis is detector pixel 618.28 773.83 1180 energies from RMF file Effective area fudge applied Arf filter applied Point source at 583.00 771.00 (detector coordinates) Point source at 4.41 0.35 (WMAP bins wrt optical axis) Point source at 0.94 4.59 (... in polar coordinates) Total counts in region = 4.09940E+04 Weighted mean angle from optical axis = 1.517 arcmin-> SIS1_NOTCHIP1.1 already present in current directory
ad11502010s100502m.evt ad11502010s101102h.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 17:30:16 0.46E+04 9231 1000 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 17:30:16 0.46E+04 9231 1000 2 HERC_X-1 BRIGHT HIGH 25/03/97 17:07:20 0.12E+04 2594 1000 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100502m.evt Total Good Bad: Region Time Phase Cut 9231 4161 5070 0 0 0 Doing file: /data/data15/seq_proc/11502010.006/ad11502010s101102h.evt Total Good Bad: Region Time Phase Cut 2594 1237 1357 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 11825 5398 6427 0 0 0 in 5819.94 seconds Spectrum has 5398 counts for 0.9275 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS1 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 5819.9 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 4.34570E-03 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... QUALITY ... ... ------- ... QUALITY ... ------- ... Bad Channels (Channel - Channel) ... --------------------------------------------- ... 0 - 15 have quality 5 ... --------------------------------------------- ... ...... exiting, changes written to file : ad11502010s110302_1.pi Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010s100502m.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS1-BRIGHT > read events ad11502010s101102h.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 2 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS1-BRIGHT > set phaname PI !xsel:ASCA-SIS1-BRIGHT > filter region ad11502010s132002_1.reg !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP1.1 !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP2.1 !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP3.1 !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.1 !xsel:ASCA-SIS1-BRIGHT > filter region ad11502010s110302.discrim !xsel:ASCA-SIS1-BRIGHT > extract spectrum !xsel:ASCA-SIS1-BRIGHT > save spectrum ad11502010s110302_1.pi group=yes Wrote spectrum to ad11502010s110302_1.pi !xsel:ASCA-SIS1-BRIGHT > exit save_session=no-> Grouping ad11502010s110302_1.pi to 40 counts/bin
------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS1 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 5819.9 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 4.34570E-03 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 15 of undefined grouping (Channel quality=bad) ... 16 - 17 are grouped by a factor 2 ... 18 - 20 are grouped by a factor 3 ... 21 - 22 are grouped by a factor 2 ... 23 - 54 are single channels ... 55 - 56 are grouped by a factor 2 ... 57 - 58 are single channels ... 59 - 60 are grouped by a factor 2 ... 61 - 62 are single channels ... 63 - 74 are grouped by a factor 2 ... 75 - 77 are grouped by a factor 3 ... 78 - 83 are grouped by a factor 2 ... 84 - 86 are grouped by a factor 3 ... 87 - 96 are grouped by a factor 2 ... 97 - 108 are grouped by a factor 3 ... 109 - 114 are grouped by a factor 2 ... 115 - 117 are grouped by a factor 3 ... 118 - 119 are grouped by a factor 2 ... 120 - 140 are grouped by a factor 3 ... 141 - 142 are grouped by a factor 2 ... 143 - 148 are grouped by a factor 3 ... 149 - 164 are grouped by a factor 4 ... 165 - 167 are grouped by a factor 3 ... 168 - 171 are grouped by a factor 4 ... 172 - 176 are grouped by a factor 5 ... 177 - 184 are grouped by a factor 4 ... 185 - 194 are grouped by a factor 5 ... 195 - 198 are grouped by a factor 4 ... 199 - 208 are grouped by a factor 5 ... 209 - 226 are grouped by a factor 6 ... 227 - 237 are grouped by a factor 11 ... 238 - 250 are grouped by a factor 13 ... 251 - 266 are grouped by a factor 16 ... 267 - 298 are grouped by a factor 32 ... 299 - 448 are grouped by a factor 150 ... 449 - 511 of undefined grouping (Channel quality=bad) ... --------------------------------------------- ... ...... exiting, changes written to file : ad11502010s110302_1.pi ** grppha 2.6.0 completed successfully-> Source occupies chip(s) 0
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x512 S1C0 Bright PI RMF Calibration data from ./ Please stand by... ...Done.-> Generating ad11502010s110302_1.arf with point=yes
ASCAARF vers 2.72 14 Mar 1997. Input WMAP array has size 19 by 9 bins expanded to 19 by 9 bins First WMAP bin is at detector pixel 648 568 8 detector pixels per WMAP bin WMAP bin size is 0.21600 mm 0.21216 arcmin Selected region size is 5.0076 arcmin^2 Optical axis is detector pixel 618.28 773.83 1180 energies from RMF file Effective area fudge applied Arf filter applied Point source at 727.00 607.00 (detector coordinates) Point source at -13.59 20.85 (WMAP bins wrt optical axis) Point source at 5.28 123.09 (... in polar coordinates) Total counts in region = 5.37500E+03 Weighted mean angle from optical axis = 5.013 arcmin-> SIS1_NOTCHIP0.1 already present in current directory
ad11502010s100802h.evt ad11502010s101002m.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 15:32:24 0.29E+04 5870 0001 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 15:32:24 0.29E+04 5870 0001 2 HERC_X-1 BRIGHT MEDIUM 25/03/97 20:50:00 0.11E+04 2313 0001 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100802h.evt Total Good Bad: Region Time Phase Cut 5870 1908 3962 0 0 0 Doing file: /data/data15/seq_proc/11502010.006/ad11502010s101002m.evt Total Good Bad: Region Time Phase Cut 2313 673 1640 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 8183 2581 5602 0 0 0 in 3977.74 seconds Spectrum has 2581 counts for 0.6489 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS1 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 3977.7 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.08984E-03 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... QUALITY ... ... ------- ... QUALITY ... ------- ... Bad Channels (Channel - Channel) ... --------------------------------------------- ... 0 - 15 have quality 5 ... --------------------------------------------- ... ...... exiting, changes written to file : ad11502010s110402_1.pi Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010s100802h.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS1-BRIGHT > read events ad11502010s101002m.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 2 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS1-BRIGHT > set phaname PI !xsel:ASCA-SIS1-BRIGHT > filter region ad11502010s132002_1.reg !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP0.1 !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP1.1 !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP2.1 !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.1 !xsel:ASCA-SIS1-BRIGHT > filter region ad11502010s110402.discrim !xsel:ASCA-SIS1-BRIGHT > extract spectrum !xsel:ASCA-SIS1-BRIGHT > save spectrum ad11502010s110402_1.pi group=yes Wrote spectrum to ad11502010s110402_1.pi !xsel:ASCA-SIS1-BRIGHT > exit save_session=no-> Grouping ad11502010s110402_1.pi to 40 counts/bin
------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS1 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 3977.7 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.08984E-03 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 15 of undefined grouping (Channel quality=bad) ... 16 - 18 are grouped by a factor 3 ... 19 - 22 are grouped by a factor 4 ... 23 - 28 are grouped by a factor 2 ... 29 - 30 are single channels ... 31 - 54 are grouped by a factor 2 ... 55 - 63 are grouped by a factor 3 ... 64 - 67 are grouped by a factor 4 ... 68 - 73 are grouped by a factor 3 ... 74 - 77 are grouped by a factor 4 ... 78 - 82 are grouped by a factor 5 ... 83 - 90 are grouped by a factor 4 ... 91 - 115 are grouped by a factor 5 ... 116 - 121 are grouped by a factor 6 ... 122 - 126 are grouped by a factor 5 ... 127 - 132 are grouped by a factor 6 ... 133 - 136 are grouped by a factor 4 ... 137 - 142 are grouped by a factor 6 ... 143 - 147 are grouped by a factor 5 ... 148 - 154 are grouped by a factor 7 ... 155 - 162 are grouped by a factor 8 ... 163 - 169 are grouped by a factor 7 ... 170 - 187 are grouped by a factor 9 ... 188 - 198 are grouped by a factor 11 ... 199 - 211 are grouped by a factor 13 ... 212 - 223 are grouped by a factor 12 ... 224 - 239 are grouped by a factor 16 ... 240 - 287 are grouped by a factor 48 ... 288 - 511 of undefined grouping (Channel quality=bad) ... --------------------------------------------- ... ...... exiting, changes written to file : ad11502010s110402_1.pi ** grppha 2.6.0 completed successfully-> Source occupies chip(s) 3
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x512 S1C3 Bright PI RMF Calibration data from ./ Please stand by... ...Done.-> Generating ad11502010s110402_1.arf with point=yes
ASCAARF vers 2.72 14 Mar 1997. Input WMAP array has size 12 by 8 bins expanded to 12 by 8 bins First WMAP bin is at detector pixel 552 568 8 detector pixels per WMAP bin WMAP bin size is 0.21600 mm 0.21216 arcmin Selected region size is 2.4081 arcmin^2 Optical axis is detector pixel 618.28 773.83 1180 energies from RMF file Effective area fudge applied Arf filter applied Point source at 603.00 603.00 (detector coordinates) Point source at 1.91 21.35 (WMAP bins wrt optical axis) Point source at 4.55 84.89 (... in polar coordinates) Total counts in region = 2.56300E+03 Weighted mean angle from optical axis = 4.321 arcmin-> Standard Output From STOOL group_event_files:
1 ad11502010g200170h.evt 494034 1 ad11502010g200270m.evt 494034 1 ad11502010g200370l.evt 494034 1 ad11502010g200470l.evt 494034-> GIS2_REGION256.4 already present in current directory
ad11502010g200170h.evt ad11502010g200270m.evt ad11502010g200370l.evt ad11502010g200470l.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.10E+05 337632 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.10E+05 337632 1024 2 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.10E+05 155659 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.10E+05 337632 1024 2 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.10E+05 155659 1024 3 HERC_X-1 PH LOW 25/03/97 15:16:34 0.19E+03 742 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.10E+05 337632 1024 2 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.10E+05 155659 1024 3 HERC_X-1 PH LOW 25/03/97 15:16:34 0.19E+03 742 1024 4 HERC_X-1 PH LOW 25/03/97 19:42:10 0.15E+00 1 1024 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200170h.evt Total Good Bad: Region Time Phase Cut 337632 295863 41769 0 0 0 Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200270m.evt Total Good Bad: Region Time Phase Cut 155659 136068 19591 0 0 0 Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200370l.evt Total Good Bad: Region Time Phase Cut 742 665 77 0 0 0 Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200470l.evt Total Good Bad: Region Time Phase Cut 1 1 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 494034 432597 61437 0 0 0 in 20474.06 seconds Spectrum has 432597 counts for 21.13 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - GIS2 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 20474. Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.90070E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 1024 No. of legal detector channels NCHAN - 1024 No. of detector channels in dataset PHAVERSN - 1992a OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... --------------------------------------------- ... ...... exiting, changes written to file : ad11502010g210170_1.pi Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010g200170h.evt Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS2-PH > read events ad11502010g200270m.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 2 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS2-PH > read events ad11502010g200370l.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 3 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS2-PH > read events ad11502010g200470l.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 4 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS2-PH > set phaname PI !xsel:ASCA-GIS2-PH > filter region ad11502010g225670_1.reg !xsel:ASCA-GIS2-PH > filter region GIS2_REGION256.4 !xsel:ASCA-GIS2-PH > extract spectrum !xsel:ASCA-GIS2-PH > save spectrum ad11502010g210170_1.pi group=yes Wrote spectrum to ad11502010g210170_1.pi !xsel:ASCA-GIS2-PH > exit save_session=no-> Correcting ad11502010g210170_1.pi for dead time
... read all the files from deadlist.tmp-> Grouping ad11502010g210170_1.pi to 40 counts/bin
------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - GIS2 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 20474. Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.90070E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 1024 No. of legal detector channels NCHAN - 1024 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - TRUE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 21 are grouped by a factor 22 ... 22 - 867 are single channels ... 868 - 869 are grouped by a factor 2 ... 870 - 877 are single channels ... 878 - 881 are grouped by a factor 2 ... 882 - 888 are single channels ... 889 - 892 are grouped by a factor 2 ... 893 - 895 are single channels ... 896 - 899 are grouped by a factor 2 ... 900 - 900 are single channels ... 901 - 902 are grouped by a factor 2 ... 903 - 904 are single channels ... 905 - 906 are grouped by a factor 2 ... 907 - 907 are single channels ... 908 - 911 are grouped by a factor 2 ... 912 - 912 are single channels ... 913 - 926 are grouped by a factor 2 ... 927 - 927 are single channels ... 928 - 929 are grouped by a factor 2 ... 930 - 930 are single channels ... 931 - 986 are grouped by a factor 2 ... 987 - 1004 are grouped by a factor 3 ... 1005 - 1008 are grouped by a factor 4 ... 1009 - 1011 are grouped by a factor 3 ... 1012 - 1015 are grouped by a factor 4 ... --------------------------------------------- ... ...... exiting, changes written to file : ad11502010g210170_1.pi ** grppha 2.6.0 completed successfully-> Fetching gis2v4_0.rmf
ASCAARF vers 2.72 14 Mar 1997. Input WMAP array has size 49 by 49 bins expanded to 128 by 128 bins First WMAP bin is at detector pixel 66 74 1 detector pixels per WMAP bin WMAP bin size is 0.25000 mm 0.24555 arcmin Selected region size is 114.65 arcmin^2 Optical axis is detector pixel 133.00 130.96 201 energies from RMF file Effective area fudge applied Arf filter applied Point source at 128.00 136.00 (detector coordinates) Point source at 5.00 -5.04 (WMAP bins wrt optical axis) Point source at 1.74 314.77 (... in polar coordinates) Total counts in region = 4.32597E+05 Weighted mean angle from optical axis = 2.628 arcmin-> Standard Output From STOOL group_event_files:
1 ad11502010g300170h.evt 485027 1 ad11502010g300270m.evt 485027 1 ad11502010g300370l.evt 485027 1 ad11502010g300470l.evt 485027-> GIS3_REGION256.4 already present in current directory
ad11502010g300170h.evt ad11502010g300270m.evt ad11502010g300370l.evt ad11502010g300470l.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.10E+05 327963 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.10E+05 327963 1024 2 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.10E+05 156322 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.10E+05 327963 1024 2 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.10E+05 156322 1024 3 HERC_X-1 PH LOW 25/03/97 15:16:34 0.19E+03 741 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.10E+05 327963 1024 2 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.10E+05 156322 1024 3 HERC_X-1 PH LOW 25/03/97 15:16:34 0.19E+03 741 1024 4 HERC_X-1 PH LOW 25/03/97 19:42:10 0.15E+00 1 1024 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300170h.evt Total Good Bad: Region Time Phase Cut 327963 288286 39677 0 0 0 Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300270m.evt Total Good Bad: Region Time Phase Cut 156322 137223 19099 0 0 0 Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300370l.evt Total Good Bad: Region Time Phase Cut 741 652 89 0 0 0 Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300470l.evt Total Good Bad: Region Time Phase Cut 1 1 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 485027 426162 58865 0 0 0 in 20484.06 seconds Spectrum has 426162 counts for 20.80 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - GIS3 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 20484. Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.90070E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 1024 No. of legal detector channels NCHAN - 1024 No. of detector channels in dataset PHAVERSN - 1992a OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... --------------------------------------------- ... ...... exiting, changes written to file : ad11502010g310170_1.pi Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010g300170h.evt Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS3-PH > read events ad11502010g300270m.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 2 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS3-PH > read events ad11502010g300370l.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 3 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS3-PH > read events ad11502010g300470l.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 4 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS3-PH > set phaname PI !xsel:ASCA-GIS3-PH > filter region ad11502010g325670_1.reg !xsel:ASCA-GIS3-PH > filter region GIS3_REGION256.4 !xsel:ASCA-GIS3-PH > extract spectrum !xsel:ASCA-GIS3-PH > save spectrum ad11502010g310170_1.pi group=yes Wrote spectrum to ad11502010g310170_1.pi !xsel:ASCA-GIS3-PH > exit save_session=no-> Correcting ad11502010g310170_1.pi for dead time
... read all the files from deadlist.tmp-> Grouping ad11502010g310170_1.pi to 40 counts/bin
------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - GIS3 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 20484. Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.90070E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 1024 No. of legal detector channels NCHAN - 1024 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - TRUE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 20 are grouped by a factor 21 ... 21 - 839 are single channels ... 840 - 841 are grouped by a factor 2 ... 842 - 848 are single channels ... 849 - 850 are grouped by a factor 2 ... 851 - 859 are single channels ... 860 - 861 are grouped by a factor 2 ... 862 - 864 are single channels ... 865 - 866 are grouped by a factor 2 ... 867 - 867 are single channels ... 868 - 871 are grouped by a factor 2 ... 872 - 875 are single channels ... 876 - 877 are grouped by a factor 2 ... 878 - 878 are single channels ... 879 - 880 are grouped by a factor 2 ... 881 - 884 are single channels ... 885 - 886 are grouped by a factor 2 ... 887 - 888 are single channels ... 889 - 892 are grouped by a factor 2 ... 893 - 894 are single channels ... 895 - 896 are grouped by a factor 2 ... 897 - 897 are single channels ... 898 - 901 are grouped by a factor 2 ... 902 - 902 are single channels ... 903 - 908 are grouped by a factor 2 ... 909 - 909 are single channels ... 910 - 947 are grouped by a factor 2 ... 948 - 950 are grouped by a factor 3 ... 951 - 964 are grouped by a factor 2 ... 965 - 967 are grouped by a factor 3 ... 968 - 969 are grouped by a factor 2 ... 970 - 975 are grouped by a factor 3 ... 976 - 979 are grouped by a factor 2 ... 980 - 985 are grouped by a factor 3 ... 986 - 987 are grouped by a factor 2 ... 988 - 1002 are grouped by a factor 3 ... --------------------------------------------- ... ...... exiting, changes written to file : ad11502010g310170_1.pi ** grppha 2.6.0 completed successfully-> Fetching gis3v4_0.rmf
ASCAARF vers 2.72 14 Mar 1997. Input WMAP array has size 49 by 49 bins expanded to 128 by 128 bins First WMAP bin is at detector pixel 72 74 1 detector pixels per WMAP bin WMAP bin size is 0.25000 mm 0.24555 arcmin Selected region size is 114.65 arcmin^2 Optical axis is detector pixel 119.36 134.44 201 energies from RMF file Effective area fudge applied Arf filter applied Point source at 134.00 136.00 (detector coordinates) Point source at -14.64 -1.56 (WMAP bins wrt optical axis) Point source at 3.62 186.08 (... in polar coordinates) Total counts in region = 4.26162E+05 Weighted mean angle from optical axis = 4.065 arcmin-> Plotting ad11502010g210170_1_pi.ps from ad11502010g210170_1.pi
XSPEC 9.01 00:03:08 4-Mar-98 Plot device not set, use "cpd" to set it Type "help" or "?" for further information !XSPEC> data ad11502010g210170_1.pi Net count rate (cts/s) for file 1 21.13 +/- 3.2125E-02 1 data set is in use !XSPEC> setplot energy !XSPEC> ignore bad !XSPEC> iplot !PLT> log y on !PLT> rescale y !PLT> hard /ps !PLT> quit !XSPEC> exit !Do you really want to exit (y) y XSPEC: quit-> Plotting ad11502010g310170_1_pi.ps from ad11502010g310170_1.pi
XSPEC 9.01 00:03:27 4-Mar-98 Plot device not set, use "cpd" to set it Type "help" or "?" for further information !XSPEC> data ad11502010g310170_1.pi Net count rate (cts/s) for file 1 20.80 +/- 3.1869E-02 1 data set is in use !XSPEC> setplot energy !XSPEC> ignore bad !XSPEC> iplot !PLT> log y on !PLT> rescale y !PLT> hard /ps !PLT> quit !XSPEC> exit !Do you really want to exit (y) y XSPEC: quit-> Plotting ad11502010s010102_1_pi.ps from ad11502010s010102_1.pi
XSPEC 9.01 00:03:44 4-Mar-98 Plot device not set, use "cpd" to set it Type "help" or "?" for further information !XSPEC> data ad11502010s010102_1.pi Net count rate (cts/s) for file 1 17.93 +/- 5.5096E-02 1 data set is in use !XSPEC> setplot energy !XSPEC> ignore bad !XSPEC> iplot !PLT> log y on !PLT> rescale y !PLT> hard /ps !PLT> quit !XSPEC> exit !Do you really want to exit (y) y XSPEC: quit-> Plotting ad11502010s010202_1_pi.ps from ad11502010s010202_1.pi
XSPEC 9.01 00:04:01 4-Mar-98 Plot device not set, use "cpd" to set it Type "help" or "?" for further information !XSPEC> data ad11502010s010202_1.pi Net count rate (cts/s) for file 1 3.045 +/- 2.2837E-02 1 data set is in use !XSPEC> setplot energy !XSPEC> ignore bad !XSPEC> iplot !PLT> log y on !PLT> rescale y !PLT> hard /ps !PLT> quit !XSPEC> exit !Do you really want to exit (y) y XSPEC: quit-> Plotting ad11502010s010302_1_pi.ps from ad11502010s010302_1.pi
XSPEC 9.01 00:04:18 4-Mar-98 Plot device not set, use "cpd" to set it Type "help" or "?" for further information !XSPEC> data ad11502010s010302_1.pi Net count rate (cts/s) for file 1 6.937 +/- 4.4590E-02 1 data set is in use !XSPEC> setplot energy !XSPEC> ignore bad !XSPEC> iplot !PLT> log y on !PLT> rescale y !PLT> hard /ps !PLT> quit !XSPEC> exit !Do you really want to exit (y) y XSPEC: quit-> Plotting ad11502010s010402_1_pi.ps from ad11502010s010402_1.pi
XSPEC 9.01 00:04:34 4-Mar-98 Plot device not set, use "cpd" to set it Type "help" or "?" for further information !XSPEC> data ad11502010s010402_1.pi Net count rate (cts/s) for file 1 1.954 +/- 2.2442E-02 1 data set is in use !XSPEC> setplot energy !XSPEC> ignore bad !XSPEC> iplot !PLT> log y on !PLT> rescale y !PLT> hard /ps !PLT> quit !XSPEC> exit !Do you really want to exit (y) y XSPEC: quit-> Plotting ad11502010s110102_1_pi.ps from ad11502010s110102_1.pi
XSPEC 9.01 00:04:51 4-Mar-98 Plot device not set, use "cpd" to set it Type "help" or "?" for further information !XSPEC> data ad11502010s110102_1.pi Net count rate (cts/s) for file 1 22.41 +/- 6.1920E-02 1 data set is in use !XSPEC> setplot energy !XSPEC> ignore bad !XSPEC> iplot !PLT> log y on !PLT> rescale y !PLT> hard /ps !PLT> quit !XSPEC> exit !Do you really want to exit (y) y XSPEC: quit-> Plotting ad11502010s110202_1_pi.ps from ad11502010s110202_1.pi
XSPEC 9.01 00:05:07 4-Mar-98 Plot device not set, use "cpd" to set it Type "help" or "?" for further information !XSPEC> data ad11502010s110202_1.pi Net count rate (cts/s) for file 1 11.82 +/- 5.8419E-02 1 data set is in use !XSPEC> setplot energy !XSPEC> ignore bad !XSPEC> iplot !PLT> log y on !PLT> rescale y !PLT> hard /ps !PLT> quit !XSPEC> exit !Do you really want to exit (y) y XSPEC: quit-> Plotting ad11502010s110302_1_pi.ps from ad11502010s110302_1.pi
XSPEC 9.01 00:05:25 4-Mar-98 Plot device not set, use "cpd" to set it Type "help" or "?" for further information !XSPEC> data ad11502010s110302_1.pi Net count rate (cts/s) for file 1 0.9275 +/- 1.2709E-02 1 data set is in use !XSPEC> setplot energy !XSPEC> ignore bad !XSPEC> iplot !PLT> log y on !PLT> rescale y !PLT> hard /ps !PLT> quit !XSPEC> exit !Do you really want to exit (y) y XSPEC: quit-> Plotting ad11502010s110402_1_pi.ps from ad11502010s110402_1.pi
XSPEC 9.01 00:05:43 4-Mar-98 Plot device not set, use "cpd" to set it Type "help" or "?" for further information !XSPEC> data ad11502010s110402_1.pi Net count rate (cts/s) for file 1 0.6489 +/- 1.3305E-02 1 data set is in use !XSPEC> setplot energy !XSPEC> ignore bad !XSPEC> iplot !PLT> log y on !PLT> rescale y !PLT> hard /ps !PLT> quit !XSPEC> exit !Do you really want to exit (y) y XSPEC: quit
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.38E+04 77323 0001 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.38E+04 77323 0001 2 HERC_X-1 BRIGHT MEDIUM 25/03/97 19:15:20 0.21E+04 42154 0001 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.38E+04 77323 0001 2 HERC_X-1 BRIGHT MEDIUM 25/03/97 19:15:20 0.21E+04 42154 0001 3 HERC_X-1 BRIGHT MEDIUM 25/03/97 13:39:04 0.17E+04 14468 1000 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.38E+04 77323 0001 2 HERC_X-1 BRIGHT MEDIUM 25/03/97 19:15:20 0.21E+04 42154 0001 3 HERC_X-1 BRIGHT MEDIUM 25/03/97 13:39:04 0.17E+04 14468 1000 4 HERC_X-1 BRIGHT MEDIUM 25/03/97 17:30:16 0.46E+04 24541 0010 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.38E+04 77323 0001 2 HERC_X-1 BRIGHT MEDIUM 25/03/97 19:15:20 0.21E+04 42154 0001 3 HERC_X-1 BRIGHT MEDIUM 25/03/97 13:39:04 0.17E+04 14468 1000 4 HERC_X-1 BRIGHT MEDIUM 25/03/97 17:30:16 0.46E+04 24541 0010 5 HERC_X-1 BRIGHT HIGH 25/03/97 14:00:08 0.18E+04 16356 1000 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.38E+04 77323 0001 2 HERC_X-1 BRIGHT MEDIUM 25/03/97 19:15:20 0.21E+04 42154 0001 3 HERC_X-1 BRIGHT MEDIUM 25/03/97 13:39:04 0.17E+04 14468 1000 4 HERC_X-1 BRIGHT MEDIUM 25/03/97 17:30:16 0.46E+04 24541 0010 5 HERC_X-1 BRIGHT HIGH 25/03/97 14:00:08 0.18E+04 16356 1000 6 HERC_X-1 BRIGHT HIGH 25/03/97 15:32:24 0.29E+04 12182 0100 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.38E+04 77323 0001 2 HERC_X-1 BRIGHT MEDIUM 25/03/97 19:15:20 0.21E+04 42154 0001 3 HERC_X-1 BRIGHT MEDIUM 25/03/97 13:39:04 0.17E+04 14468 1000 4 HERC_X-1 BRIGHT MEDIUM 25/03/97 17:30:16 0.46E+04 24541 0010 5 HERC_X-1 BRIGHT HIGH 25/03/97 14:00:08 0.18E+04 16356 1000 6 HERC_X-1 BRIGHT HIGH 25/03/97 15:32:24 0.29E+04 12182 0100 7 HERC_X-1 BRIGHT HIGH 25/03/97 17:07:20 0.13E+04 7600 0010 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.38E+04 77323 0001 2 HERC_X-1 BRIGHT MEDIUM 25/03/97 19:15:20 0.21E+04 42154 0001 3 HERC_X-1 BRIGHT MEDIUM 25/03/97 13:39:04 0.17E+04 14468 1000 4 HERC_X-1 BRIGHT MEDIUM 25/03/97 17:30:16 0.46E+04 24541 0010 5 HERC_X-1 BRIGHT HIGH 25/03/97 14:00:08 0.18E+04 16356 1000 6 HERC_X-1 BRIGHT HIGH 25/03/97 15:32:24 0.29E+04 12182 0100 7 HERC_X-1 BRIGHT HIGH 25/03/97 17:07:20 0.13E+04 7600 0010 8 HERC_X-1 BRIGHT MEDIUM 25/03/97 20:50:00 0.11E+04 4474 0100 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000102h.evt Total Good Bad: Region Time Phase Cut 77323 70716 6607 0 0 0 Writing events file 70716 events written to the output file Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000202m.evt Total Good Bad: Region Time Phase Cut 42154 38556 3598 0 0 0 Writing events file 109272 events written to the output file Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000302m.evt Total Good Bad: Region Time Phase Cut 14468 11753 2715 0 0 0 Writing events file 121025 events written to the output file Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000402m.evt Total Good Bad: Region Time Phase Cut 24541 15015 9526 0 0 0 Writing events file 136040 events written to the output file Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000502h.evt Total Good Bad: Region Time Phase Cut 16356 13236 3120 0 0 0 Writing events file 149276 events written to the output file Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000802h.evt Total Good Bad: Region Time Phase Cut 12182 6137 6045 0 0 0 Writing events file 155413 events written to the output file Doing file: /data/data15/seq_proc/11502010.006/ad11502010s001002h.evt Total Good Bad: Region Time Phase Cut 7600 4745 2855 0 0 0 Writing events file 160158 events written to the output file Doing file: /data/data15/seq_proc/11502010.006/ad11502010s001102m.evt Total Good Bad: Region Time Phase Cut 4474 2324 2150 0 0 0 Writing events file 162482 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 199098 162482 36616 0 0 0 in 19244.41 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010s000102h.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS0-BRIGHT > read events ad11502010s000202m.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 2 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS0-BRIGHT > read events ad11502010s000302m.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 3 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS0-BRIGHT > read events ad11502010s000402m.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 4 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS0-BRIGHT > read events ad11502010s000502h.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 5 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS0-BRIGHT > read events ad11502010s000802h.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 6 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS0-BRIGHT > read events ad11502010s001002h.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 7 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS0-BRIGHT > read events ad11502010s001102m.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 8 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS0-BRIGHT > filter region ad11502010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT > extract events !xsel:ASCA-SIS0-BRIGHT > save events outfile=events.tmp use_events=yes Wrote events list to file events.tmp Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-SIS0-BRIGHT > exit save_session=no-> Extracting ad11502010s000002_1.lc with binsize 5.92201233921346
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 13:39:04 0.19E+05 162482 0001 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/events.tmp Total Good Bad: Region Time Phase Cut 162482 162482 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 162482 162482 0 0 0 0 in 19244.41 seconds Fits light curve has 162482 counts for 8.443 counts/sec Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events events.tmp Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS0-BRIGHT > set binsize 5.92201233921346 !xsel:ASCA-SIS0-BRIGHT > extract curve exposure=0.5 !xsel:ASCA-SIS0-BRIGHT > save curve ad11502010s000002_1.lc Wrote FITS light curve to file ad11502010s000002_1.lc !xsel:ASCA-SIS0-BRIGHT > exit save_session=no-> Plotting light curve ad11502010s000002_1_lc.ps
Type "help" for information [1]xronos> Current User Interface is ; command driven [2]xronos> Enter up to 50 input filenames and options for series 1 (or rtn) Ser. A filename 1 +options[.rbf]=> ad11502010s000002_1.lc Selected FITS extensions: 1 - RATE TABLE; Source ............ HERC_X-1_2 Start Time (d) .... 10532 14:09:22.467 FITS Extension .... 1 - `RATE ` Stop Time (d) ..... 10533 00:18:26.467 No. of Rows ....... 3253 Bin Time (s) ...... 5.922 Right Ascension ... 2.5443E+02 Internal time sys.. Converted to TJD Declination ....... 3.5309E+01 Experiment ........ ASCA SIS0 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No Selected Columns: 1 - Time; 2 - Y-axis; 3 - Y-error; File contains binned data. Ser. A filename 2 +options[.rbf]=> Enter up to 50 input filenames and options for series 2 (or rtn) Ser. B filename 1 +options[.rbf]=> Enter up to 50 input filenames and options for series 3 (or rtn) Ser. C filename 1 +options[.rbf]=> [3]xronos> Maximum of 1 Intvs. with 512 Newbins of 71.4587 (s) Intv 1 Start10532 14: 9:58 Ser.1 Avg 8.424 Chisq 0.9430E+05 Var 47.57 Newbs. 286 Min 1.673 Max 23.63 expVar 0.1502 Bins 3253 Results from Statistical Analysis Newbin Integration Time (s).. 71.459 Interval Duration (s)........ 36515. No. of Newbins .............. 286 Average (c/s) ............... 8.4240 +/- 0.23E-01 Standard Deviation (c/s)..... 6.8974 Minimum (c/s)................ 1.6733 Maximum (c/s)................ 23.627 Variance ((c/s)**2).......... 47.573 +/- 4.0 Expected Variance ((c/s)**2). 0.15017 +/- 0.13E-01 Third Moment ((c/s)**3)...... 232.41 Average Deviation (c/s)...... 6.1306 Skewness..................... 0.70830 +/- 0.14 Kurtosis..................... -1.2636 +/- 0.29 RMS fractional variation..... 0.81748 +/- 0.34E-01 Chi-Square................... 94296. dof 285 Chi-Square Prob of constancy. 0. (0 means < 1.e-38) Kolm.-Smir. Prob of constancy 0. (0 means < 1.e-38) [4]xronos> [5]xronos> Maximum of 1 Intvs. with 512 Newbins of 71.4587 (s) Intv 1 Start10532 14: 9:58 Ser.1 Avg 8.424 Chisq 0.9430E+05 Var 47.57 Newbs. 286 Min 1.673 Max 23.63 expVar 0.1502 Bins 3253 Light curve ready ! Frme 1 Written to output file : xronos.qlc1 PLT> PLT> PLT> [6]xronos>-> Standard Error Output From FTOOL xronos
Note: the following IEEE floating-point arithmetic exceptions occurred and were never cleared; see ieee_flags(3M): Inexact; Underflow; Sun's implementation of IEEE arithmetic is discussed in the Numerical Computation Guide.-> TIMEDEL=4.0000000000E+00 for ad11502010s100102h.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.37E+04 96199 0100 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.37E+04 96199 0100 2 HERC_X-1 BRIGHT MEDIUM 25/03/97 19:15:20 0.21E+04 48215 0100 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.37E+04 96199 0100 2 HERC_X-1 BRIGHT MEDIUM 25/03/97 19:15:20 0.21E+04 48215 0100 3 HERC_X-1 BRIGHT MEDIUM 25/03/97 13:39:04 0.17E+04 25917 0010 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.37E+04 96199 0100 2 HERC_X-1 BRIGHT MEDIUM 25/03/97 19:15:20 0.21E+04 48215 0100 3 HERC_X-1 BRIGHT MEDIUM 25/03/97 13:39:04 0.17E+04 25917 0010 4 HERC_X-1 BRIGHT HIGH 25/03/97 14:00:08 0.18E+04 27028 0010 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.37E+04 96199 0100 2 HERC_X-1 BRIGHT MEDIUM 25/03/97 19:15:20 0.21E+04 48215 0100 3 HERC_X-1 BRIGHT MEDIUM 25/03/97 13:39:04 0.17E+04 25917 0010 4 HERC_X-1 BRIGHT HIGH 25/03/97 14:00:08 0.18E+04 27028 0010 5 HERC_X-1 BRIGHT MEDIUM 25/03/97 17:30:16 0.46E+04 9231 1000 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.37E+04 96199 0100 2 HERC_X-1 BRIGHT MEDIUM 25/03/97 19:15:20 0.21E+04 48215 0100 3 HERC_X-1 BRIGHT MEDIUM 25/03/97 13:39:04 0.17E+04 25917 0010 4 HERC_X-1 BRIGHT HIGH 25/03/97 14:00:08 0.18E+04 27028 0010 5 HERC_X-1 BRIGHT MEDIUM 25/03/97 17:30:16 0.46E+04 9231 1000 6 HERC_X-1 BRIGHT HIGH 25/03/97 15:32:24 0.29E+04 5870 0001 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.37E+04 96199 0100 2 HERC_X-1 BRIGHT MEDIUM 25/03/97 19:15:20 0.21E+04 48215 0100 3 HERC_X-1 BRIGHT MEDIUM 25/03/97 13:39:04 0.17E+04 25917 0010 4 HERC_X-1 BRIGHT HIGH 25/03/97 14:00:08 0.18E+04 27028 0010 5 HERC_X-1 BRIGHT MEDIUM 25/03/97 17:30:16 0.46E+04 9231 1000 6 HERC_X-1 BRIGHT HIGH 25/03/97 15:32:24 0.29E+04 5870 0001 7 HERC_X-1 BRIGHT MEDIUM 25/03/97 20:50:00 0.11E+04 2313 0001 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.37E+04 96199 0100 2 HERC_X-1 BRIGHT MEDIUM 25/03/97 19:15:20 0.21E+04 48215 0100 3 HERC_X-1 BRIGHT MEDIUM 25/03/97 13:39:04 0.17E+04 25917 0010 4 HERC_X-1 BRIGHT HIGH 25/03/97 14:00:08 0.18E+04 27028 0010 5 HERC_X-1 BRIGHT MEDIUM 25/03/97 17:30:16 0.46E+04 9231 1000 6 HERC_X-1 BRIGHT HIGH 25/03/97 15:32:24 0.29E+04 5870 0001 7 HERC_X-1 BRIGHT MEDIUM 25/03/97 20:50:00 0.11E+04 2313 0001 8 HERC_X-1 BRIGHT HIGH 25/03/97 17:07:20 0.12E+04 2594 1000 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100102h.evt Total Good Bad: Region Time Phase Cut 96199 87799 8400 0 0 0 Writing events file 87799 events written to the output file Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100202m.evt Total Good Bad: Region Time Phase Cut 48215 43677 4538 0 0 0 Writing events file 131476 events written to the output file Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100302m.evt Total Good Bad: Region Time Phase Cut 25917 20225 5692 0 0 0 Writing events file 151701 events written to the output file Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100402h.evt Total Good Bad: Region Time Phase Cut 27028 21123 5905 0 0 0 Writing events file 172824 events written to the output file Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100502m.evt Total Good Bad: Region Time Phase Cut 9231 4209 5022 0 0 0 Writing events file 177033 events written to the output file Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100802h.evt Total Good Bad: Region Time Phase Cut 5870 2076 3794 0 0 0 Writing events file 179109 events written to the output file Doing file: /data/data15/seq_proc/11502010.006/ad11502010s101002m.evt Total Good Bad: Region Time Phase Cut 2313 925 1388 0 0 0 Writing events file 180034 events written to the output file Doing file: /data/data15/seq_proc/11502010.006/ad11502010s101102h.evt Total Good Bad: Region Time Phase Cut 2594 1248 1346 0 0 0 Writing events file 181282 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 217367 181282 36085 0 0 0 in 19114.29 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010s100102h.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS1-BRIGHT > read events ad11502010s100202m.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 2 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS1-BRIGHT > read events ad11502010s100302m.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 3 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS1-BRIGHT > read events ad11502010s100402h.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 4 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS1-BRIGHT > read events ad11502010s100502m.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 5 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS1-BRIGHT > read events ad11502010s100802h.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 6 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS1-BRIGHT > read events ad11502010s101002m.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 7 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS1-BRIGHT > read events ad11502010s101102h.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 8 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS1-BRIGHT > filter region ad11502010s132002_1.reg !xsel:ASCA-SIS1-BRIGHT > extract events !xsel:ASCA-SIS1-BRIGHT > save events outfile=events.tmp use_events=yes Wrote events list to file events.tmp Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-SIS1-BRIGHT > exit save_session=no-> Extracting ad11502010s100002_1.lc with binsize 5.27197722095665
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 13:39:04 0.19E+05 181282 0100 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/events.tmp Total Good Bad: Region Time Phase Cut 181282 181282 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 181282 181282 0 0 0 0 in 19114.29 seconds Fits light curve has 181282 counts for 9.484 counts/sec Thresholding removed significant counts Try exposure=0.0 on the extract command in xselect or lcthresh=0.0 if running extractor stand-alone Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events events.tmp Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS1-BRIGHT > set binsize 5.27197722095665 !xsel:ASCA-SIS1-BRIGHT > extract curve exposure=0.5 !xsel:ASCA-SIS1-BRIGHT > save curve ad11502010s100002_1.lc Wrote FITS light curve to file ad11502010s100002_1.lc !xsel:ASCA-SIS1-BRIGHT > exit save_session=no-> Plotting light curve ad11502010s100002_1_lc.ps
Type "help" for information [1]xronos> Current User Interface is ; command driven [2]xronos> Enter up to 50 input filenames and options for series 1 (or rtn) Ser. A filename 1 +options[.rbf]=> ad11502010s100002_1.lc Selected FITS extensions: 1 - RATE TABLE; Source ............ HERC_X-1_2 Start Time (d) .... 10532 14:09:22.467 FITS Extension .... 1 - `RATE ` Stop Time (d) ..... 10533 00:18:26.467 No. of Rows ....... 3628 Bin Time (s) ...... 5.272 Right Ascension ... 2.5443E+02 Internal time sys.. Converted to TJD Declination ....... 3.5309E+01 Experiment ........ ASCA SIS1 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No Selected Columns: 1 - Time; 2 - Y-axis; 3 - Y-error; File contains binned data. Ser. A filename 2 +options[.rbf]=> Enter up to 50 input filenames and options for series 2 (or rtn) Ser. B filename 1 +options[.rbf]=> Enter up to 50 input filenames and options for series 3 (or rtn) Ser. C filename 1 +options[.rbf]=> [3]xronos> Maximum of 1 Intvs. with 512 Newbins of 71.4587 (s) Intv 1 Start10532 14: 9:58 Ser.1 Avg 9.558 Chisq 0.1462E+06 Var 93.12 Newbs. 286 Min 0.5149 Max 29.86 expVar 0.1883 Bins 3628 Results from Statistical Analysis Newbin Integration Time (s).. 71.459 Interval Duration (s)........ 36515. No. of Newbins .............. 286 Average (c/s) ............... 9.5576 +/- 0.26E-01 Standard Deviation (c/s)..... 9.6501 Minimum (c/s)................ 0.51485 Maximum (c/s)................ 29.856 Variance ((c/s)**2).......... 93.124 +/- 7.8 Expected Variance ((c/s)**2). 0.18834 +/- 0.16E-01 Third Moment ((c/s)**3)...... 408.05 Average Deviation (c/s)...... 8.8321 Skewness..................... 0.45407 +/- 0.14 Kurtosis..................... -1.4585 +/- 0.29 RMS fractional variation..... 1.0087 +/- 0.42E-01 Chi-Square................... 0.14618E+06 dof 285 Chi-Square Prob of constancy. 0. (0 means < 1.e-38) Kolm.-Smir. Prob of constancy 0. (0 means < 1.e-38) [4]xronos> [5]xronos> Maximum of 1 Intvs. with 512 Newbins of 71.4587 (s) Intv 1 Start10532 14: 9:58 Ser.1 Avg 9.558 Chisq 0.1462E+06 Var 93.12 Newbs. 286 Min 0.5149 Max 29.86 expVar 0.1883 Bins 3628 Light curve ready ! Frme 1 Written to output file : xronos.qlc1 PLT> PLT> PLT> [6]xronos>-> Standard Error Output From FTOOL xronos
Note: the following IEEE floating-point arithmetic exceptions occurred and were never cleared; see ieee_flags(3M): Inexact; Underflow; Sun's implementation of IEEE arithmetic is discussed in the Numerical Computation Guide.-> TIMEDEL=6.2500000000E-02 for ad11502010g200170h.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.10E+05 337632 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.10E+05 337632 1024 2 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.10E+05 155659 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.10E+05 337632 1024 2 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.10E+05 155659 1024 3 HERC_X-1 PH LOW 25/03/97 15:16:34 0.19E+03 742 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.10E+05 337632 1024 2 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.10E+05 155659 1024 3 HERC_X-1 PH LOW 25/03/97 15:16:34 0.19E+03 742 1024 4 HERC_X-1 PH LOW 25/03/97 19:42:10 0.15E+00 1 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200170h.evt Total Good Bad: Region Time Phase Cut 337632 295863 41769 0 0 0 Writing events file 295863 events written to the output file Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200270m.evt Total Good Bad: Region Time Phase Cut 155659 136068 19591 0 0 0 Writing events file 431931 events written to the output file Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200370l.evt Total Good Bad: Region Time Phase Cut 742 665 77 0 0 0 Writing events file 432596 events written to the output file Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200470l.evt Total Good Bad: Region Time Phase Cut 1 1 0 0 0 0 Writing events file 432597 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 494034 432597 61437 0 0 0 in 20474.06 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010g200170h.evt Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS2-PH > read events ad11502010g200270m.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 2 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS2-PH > read events ad11502010g200370l.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 3 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS2-PH > read events ad11502010g200470l.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 4 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS2-PH > filter region ad11502010g225670_1.reg !xsel:ASCA-GIS2-PH > extract events !xsel:ASCA-GIS2-PH > save events outfile=events.tmp use_events=yes Wrote events list to file events.tmp Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-GIS2-PH > exit save_session=no-> Extracting ad11502010g200070_1.lc with binsize 2.36641297070748
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 13:39:14 0.20E+05 432597 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/events.tmp Total Good Bad: Region Time Phase Cut 432597 432597 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 432597 432597 0 0 0 0 in 20474.06 seconds Fits light curve has 432597 counts for 21.13 counts/sec Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events events.tmp Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS2-PH > set binsize 2.36641297070748 !xsel:ASCA-GIS2-PH > extract curve exposure=0.5 !xsel:ASCA-GIS2-PH > save curve ad11502010g200070_1.lc Wrote FITS light curve to file ad11502010g200070_1.lc !xsel:ASCA-GIS2-PH > exit save_session=no-> Plotting light curve ad11502010g200070_1_lc.ps
Type "help" for information [1]xronos> Current User Interface is ; command driven [2]xronos> Enter up to 50 input filenames and options for series 1 (or rtn) Ser. A filename 1 +options[.rbf]=> ad11502010g200070_1.lc Selected FITS extensions: 1 - RATE TABLE; Source ............ HERC_X-1_2 Start Time (d) .... 10532 14:09:22.467 FITS Extension .... 1 - `RATE ` Stop Time (d) ..... 10533 00:18:26.467 No. of Rows ....... 8653 Bin Time (s) ...... 2.366 Right Ascension ... 2.5443E+02 Internal time sys.. Converted to TJD Declination ....... 3.5309E+01 Experiment ........ ASCA GIS2 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No Selected Columns: 1 - Time; 2 - Y-axis; 3 - Y-error; File contains binned data. Ser. A filename 2 +options[.rbf]=> Enter up to 50 input filenames and options for series 2 (or rtn) Ser. B filename 1 +options[.rbf]=> Enter up to 50 input filenames and options for series 3 (or rtn) Ser. C filename 1 +options[.rbf]=> [3]xronos> Maximum of 1 Intvs. with 512 Newbins of 71.4587 (s) Intv 1 Start10532 14: 9:58 Ser.1 Avg 20.88 Chisq 0.5572E+05 Var 64.96 Newbs. 301 Min 3.113 Max 31.57 expVar 0.3451 Bins 8653 Results from Statistical Analysis Newbin Integration Time (s).. 71.459 Interval Duration (s)........ 36515. No. of Newbins .............. 301 Average (c/s) ............... 20.878 +/- 0.34E-01 Standard Deviation (c/s)..... 8.0595 Minimum (c/s)................ 3.1132 Maximum (c/s)................ 31.567 Variance ((c/s)**2).......... 64.956 +/- 5.3 Expected Variance ((c/s)**2). 0.34510 +/- 0.28E-01 Third Moment ((c/s)**3)...... -15.642 Average Deviation (c/s)...... 7.9042 Skewness.....................-0.29879E-01 +/- 0.14 Kurtosis..................... -1.7425 +/- 0.28 RMS fractional variation..... 0.38501 +/- 0.16E-01 Chi-Square................... 55718. dof 300 Chi-Square Prob of constancy. 0. (0 means < 1.e-38) Kolm.-Smir. Prob of constancy 0. (0 means < 1.e-38) [4]xronos> [5]xronos> Maximum of 1 Intvs. with 512 Newbins of 71.4587 (s) Intv 1 Start10532 14: 9:58 Ser.1 Avg 20.88 Chisq 0.5572E+05 Var 64.96 Newbs. 301 Min 3.113 Max 31.57 expVar 0.3451 Bins 8653 Light curve ready ! Frme 1 Written to output file : xronos.qlc1 PLT> PLT> PLT> [6]xronos>-> Standard Error Output From FTOOL xronos
Note: the following IEEE floating-point arithmetic exceptions occurred and were never cleared; see ieee_flags(3M): Inexact; Underflow; Sun's implementation of IEEE arithmetic is discussed in the Numerical Computation Guide.-> TIMEDEL=6.2500000000E-02 for ad11502010g300170h.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.10E+05 327963 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.10E+05 327963 1024 2 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.10E+05 156322 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.10E+05 327963 1024 2 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.10E+05 156322 1024 3 HERC_X-1 PH LOW 25/03/97 15:16:34 0.19E+03 741 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.10E+05 327963 1024 2 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.10E+05 156322 1024 3 HERC_X-1 PH LOW 25/03/97 15:16:34 0.19E+03 741 1024 4 HERC_X-1 PH LOW 25/03/97 19:42:10 0.15E+00 1 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300170h.evt Total Good Bad: Region Time Phase Cut 327963 288286 39677 0 0 0 Writing events file 288286 events written to the output file Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300270m.evt Total Good Bad: Region Time Phase Cut 156322 137223 19099 0 0 0 Writing events file 425509 events written to the output file Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300370l.evt Total Good Bad: Region Time Phase Cut 741 652 89 0 0 0 Writing events file 426161 events written to the output file Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300470l.evt Total Good Bad: Region Time Phase Cut 1 1 0 0 0 0 Writing events file 426162 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 485027 426162 58865 0 0 0 in 20484.06 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010g300170h.evt Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS3-PH > read events ad11502010g300270m.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 2 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS3-PH > read events ad11502010g300370l.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 3 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS3-PH > read events ad11502010g300470l.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 4 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS3-PH > filter region ad11502010g325670_1.reg !xsel:ASCA-GIS3-PH > extract events !xsel:ASCA-GIS3-PH > save events outfile=events.tmp use_events=yes Wrote events list to file events.tmp Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-GIS3-PH > exit save_session=no-> Extracting ad11502010g300070_1.lc with binsize 2.40331881207235
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 13:39:14 0.20E+05 426162 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/events.tmp Total Good Bad: Region Time Phase Cut 426162 426162 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 426162 426162 0 0 0 0 in 20484.06 seconds Fits light curve has 426162 counts for 20.80 counts/sec Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events events.tmp Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS3-PH > set binsize 2.40331881207235 !xsel:ASCA-GIS3-PH > extract curve exposure=0.5 !xsel:ASCA-GIS3-PH > save curve ad11502010g300070_1.lc Wrote FITS light curve to file ad11502010g300070_1.lc !xsel:ASCA-GIS3-PH > exit save_session=no-> Plotting light curve ad11502010g300070_1_lc.ps
Type "help" for information [1]xronos> Current User Interface is ; command driven [2]xronos> Enter up to 50 input filenames and options for series 1 (or rtn) Ser. A filename 1 +options[.rbf]=> ad11502010g300070_1.lc Selected FITS extensions: 1 - RATE TABLE; Source ............ HERC_X-1_2 Start Time (d) .... 10532 14:09:22.467 FITS Extension .... 1 - `RATE ` Stop Time (d) ..... 10533 00:18:26.467 No. of Rows ....... 8522 Bin Time (s) ...... 2.403 Right Ascension ... 2.5443E+02 Internal time sys.. Converted to TJD Declination ....... 3.5309E+01 Experiment ........ ASCA GIS3 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No Selected Columns: 1 - Time; 2 - Y-axis; 3 - Y-error; File contains binned data. Ser. A filename 2 +options[.rbf]=> Enter up to 50 input filenames and options for series 2 (or rtn) Ser. B filename 1 +options[.rbf]=> Enter up to 50 input filenames and options for series 3 (or rtn) Ser. C filename 1 +options[.rbf]=> [3]xronos> Maximum of 1 Intvs. with 512 Newbins of 71.4587 (s) Intv 1 Start10532 14: 9:58 Ser.1 Avg 20.57 Chisq 0.5006E+05 Var 58.15 Newbs. 301 Min 3.412 Max 30.59 expVar 0.3432 Bins 8522 Results from Statistical Analysis Newbin Integration Time (s).. 71.459 Interval Duration (s)........ 36515. No. of Newbins .............. 301 Average (c/s) ............... 20.566 +/- 0.34E-01 Standard Deviation (c/s)..... 7.6254 Minimum (c/s)................ 3.4119 Maximum (c/s)................ 30.590 Variance ((c/s)**2).......... 58.147 +/- 4.7 Expected Variance ((c/s)**2). 0.34318 +/- 0.28E-01 Third Moment ((c/s)**3)...... -20.693 Average Deviation (c/s)...... 7.4623 Skewness.....................-0.46669E-01 +/- 0.14 Kurtosis..................... -1.6902 +/- 0.28 RMS fractional variation..... 0.36969 +/- 0.15E-01 Chi-Square................... 50060. dof 300 Chi-Square Prob of constancy. 0. (0 means < 1.e-38) Kolm.-Smir. Prob of constancy 0. (0 means < 1.e-38) [4]xronos> [5]xronos> Maximum of 1 Intvs. with 512 Newbins of 71.4587 (s) Intv 1 Start10532 14: 9:58 Ser.1 Avg 20.57 Chisq 0.5006E+05 Var 58.15 Newbs. 301 Min 3.412 Max 30.59 expVar 0.3432 Bins 8522 Light curve ready ! Frme 1 Written to output file : xronos.qlc1 PLT> PLT> PLT> [6]xronos>-> Standard Error Output From FTOOL xronos
Note: the following IEEE floating-point arithmetic exceptions occurred and were never cleared; see ieee_flags(3M): Inexact; Underflow; Sun's implementation of IEEE arithmetic is discussed in the Numerical Computation Guide.-> Merging GTIs from the following files:
ad11502010g200170h.evt[2] ad11502010g200270m.evt[2] ad11502010g200370l.evt[2] ad11502010g200470l.evt[2]-> Making L1 light curve of ft970325_1338_0040G2HK.fits with irate=HIGH
ghkcurve: ALLGTI found in input HK file, will be applied to data. ghkcurve: 78846 output records from 78865 good input G2_L1 records.-> Making L1 light curve of ft970325_1338_0040G2HK.fits with irate=HI+MED
ghkcurve: ALLGTI found in input HK file, will be applied to data. ghkcurve: 20261 output records from 88993 good input G2_L1 records.-> Merging GTIs from the following files:
ad11502010g300170h.evt[2] ad11502010g300270m.evt[2] ad11502010g300370l.evt[2] ad11502010g300470l.evt[2]-> Making L1 light curve of ft970325_1338_0040G3HK.fits with irate=HIGH
ghkcurve: ALLGTI found in input HK file, will be applied to data. ghkcurve: 78575 output records from 78598 good input G3_L1 records.-> Making L1 light curve of ft970325_1338_0040G3HK.fits with irate=HI+MED
ghkcurve: ALLGTI found in input HK file, will be applied to data. ghkcurve: 20266 output records from 88726 good input G3_L1 records.
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.10E+05 337632 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200170h.evt Total Good Bad: Region Time Phase Cut 337632 295863 41769 0 0 0 Writing events file 295863 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 337632 295863 41769 0 0 0 in 10153.96 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010g200170h.evt Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS2-PH > filter region ad11502010g225670_1.reg !xsel:ASCA-GIS2-PH > extract events !xsel:ASCA-GIS2-PH > save events outfile=ad11502010g200170h_1.ulc use_events=yes Wrote events list to file ad11502010g200170h_1.ulc Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-GIS2-PH > exit save_session=no-> Extracting unbinned light curve ad11502010g200270m_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.10E+05 155659 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200270m.evt Total Good Bad: Region Time Phase Cut 155659 136068 19591 0 0 0 Writing events file 136068 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 155659 136068 19591 0 0 0 in 10128.23 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010g200270m.evt Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS2-PH > filter region ad11502010g225670_1.reg !xsel:ASCA-GIS2-PH > extract events !xsel:ASCA-GIS2-PH > save events outfile=ad11502010g200270m_1.ulc use_events=yes Wrote events list to file ad11502010g200270m_1.ulc Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-GIS2-PH > exit save_session=no-> Extracting unbinned light curve ad11502010g200370l_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH LOW 25/03/97 15:16:34 0.19E+03 742 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200370l.evt Total Good Bad: Region Time Phase Cut 742 665 77 0 0 0 Writing events file 665 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 742 665 77 0 0 0 in 191.73 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010g200370l.evt Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS2-PH > filter region ad11502010g225670_1.reg !xsel:ASCA-GIS2-PH > extract events !xsel:ASCA-GIS2-PH > save events outfile=ad11502010g200370l_1.ulc use_events=yes Wrote events list to file ad11502010g200370l_1.ulc Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-GIS2-PH > exit save_session=no-> Extracting unbinned light curve ad11502010g200470l_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH LOW 25/03/97 19:42:10 0.15E+00 1 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200470l.evt Total Good Bad: Region Time Phase Cut 1 1 0 0 0 0 Writing events file 1 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1 1 0 0 0 0 in 0.15 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010g200470l.evt Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS2-PH > filter region ad11502010g225670_1.reg !xsel:ASCA-GIS2-PH > extract events !xsel:ASCA-GIS2-PH > save events outfile=ad11502010g200470l_1.ulc use_events=yes Wrote events list to file ad11502010g200470l_1.ulc Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-GIS2-PH > exit save_session=no-> Deleting ad11502010g200470l_1.ulc since it has 1 events
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.10E+05 327963 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300170h.evt Total Good Bad: Region Time Phase Cut 327963 288286 39677 0 0 0 Writing events file 288286 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 327963 288286 39677 0 0 0 in 10163.96 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010g300170h.evt Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS3-PH > filter region ad11502010g325670_1.reg !xsel:ASCA-GIS3-PH > extract events !xsel:ASCA-GIS3-PH > save events outfile=ad11502010g300170h_1.ulc use_events=yes Wrote events list to file ad11502010g300170h_1.ulc Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-GIS3-PH > exit save_session=no-> Extracting unbinned light curve ad11502010g300270m_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.10E+05 156322 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300270m.evt Total Good Bad: Region Time Phase Cut 156322 137223 19099 0 0 0 Writing events file 137223 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 156322 137223 19099 0 0 0 in 10128.23 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010g300270m.evt Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS3-PH > filter region ad11502010g325670_1.reg !xsel:ASCA-GIS3-PH > extract events !xsel:ASCA-GIS3-PH > save events outfile=ad11502010g300270m_1.ulc use_events=yes Wrote events list to file ad11502010g300270m_1.ulc Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-GIS3-PH > exit save_session=no-> Extracting unbinned light curve ad11502010g300370l_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH LOW 25/03/97 15:16:34 0.19E+03 741 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300370l.evt Total Good Bad: Region Time Phase Cut 741 652 89 0 0 0 Writing events file 652 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 741 652 89 0 0 0 in 191.73 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010g300370l.evt Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS3-PH > filter region ad11502010g325670_1.reg !xsel:ASCA-GIS3-PH > extract events !xsel:ASCA-GIS3-PH > save events outfile=ad11502010g300370l_1.ulc use_events=yes Wrote events list to file ad11502010g300370l_1.ulc Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-GIS3-PH > exit save_session=no-> Extracting unbinned light curve ad11502010g300470l_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH LOW 25/03/97 19:42:10 0.15E+00 1 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300470l.evt Total Good Bad: Region Time Phase Cut 1 1 0 0 0 0 Writing events file 1 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1 1 0 0 0 0 in 0.15 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010g300470l.evt Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS3-PH > filter region ad11502010g325670_1.reg !xsel:ASCA-GIS3-PH > extract events !xsel:ASCA-GIS3-PH > save events outfile=ad11502010g300470l_1.ulc use_events=yes Wrote events list to file ad11502010g300470l_1.ulc Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-GIS3-PH > exit save_session=no-> Deleting ad11502010g300470l_1.ulc since it has 1 events
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.38E+04 77323 0001 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000102h.evt Total Good Bad: Region Time Phase Cut 77323 70716 6607 0 0 0 Writing events file 70716 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 77323 70716 6607 0 0 0 in 3775.72 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010s000102h.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS0-BRIGHT > filter region ad11502010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT > extract events !xsel:ASCA-SIS0-BRIGHT > save events outfile=ad11502010s000102h_1.ulc use_events=yes Wrote events list to file ad11502010s000102h_1.ulc Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-SIS0-BRIGHT > exit save_session=no-> Extracting unbinned light curve ad11502010s000202m_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 19:15:20 0.21E+04 42154 0001 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000202m.evt Total Good Bad: Region Time Phase Cut 42154 38556 3598 0 0 0 Writing events file 38556 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 42154 38556 3598 0 0 0 in 2132.15 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010s000202m.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS0-BRIGHT > filter region ad11502010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT > extract events !xsel:ASCA-SIS0-BRIGHT > save events outfile=ad11502010s000202m_1.ulc use_events=yes Wrote events list to file ad11502010s000202m_1.ulc Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-SIS0-BRIGHT > exit save_session=no-> Extracting unbinned light curve ad11502010s000302m_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 13:39:04 0.17E+04 14468 1000 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000302m.evt Total Good Bad: Region Time Phase Cut 14468 11753 2715 0 0 0 Writing events file 11753 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 14468 11753 2715 0 0 0 in 1669.24 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010s000302m.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS0-BRIGHT > filter region ad11502010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT > extract events !xsel:ASCA-SIS0-BRIGHT > save events outfile=ad11502010s000302m_1.ulc use_events=yes Wrote events list to file ad11502010s000302m_1.ulc Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-SIS0-BRIGHT > exit save_session=no-> Extracting unbinned light curve ad11502010s000402m_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 17:30:16 0.46E+04 24541 0010 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000402m.evt Total Good Bad: Region Time Phase Cut 24541 15015 9526 0 0 0 Writing events file 15015 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 24541 15015 9526 0 0 0 in 4618.04 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010s000402m.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS0-BRIGHT > filter region ad11502010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT > extract events !xsel:ASCA-SIS0-BRIGHT > save events outfile=ad11502010s000402m_1.ulc use_events=yes Wrote events list to file ad11502010s000402m_1.ulc Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-SIS0-BRIGHT > exit save_session=no-> Extracting unbinned light curve ad11502010s000502h_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 14:00:08 0.18E+04 16356 1000 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000502h.evt Total Good Bad: Region Time Phase Cut 16356 13236 3120 0 0 0 Writing events file 13236 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 16356 13236 3120 0 0 0 in 1841.61 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010s000502h.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS0-BRIGHT > filter region ad11502010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT > extract events !xsel:ASCA-SIS0-BRIGHT > save events outfile=ad11502010s000502h_1.ulc use_events=yes Wrote events list to file ad11502010s000502h_1.ulc Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-SIS0-BRIGHT > exit save_session=no-> Extracting unbinned light curve ad11502010s000802h_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 15:32:24 0.29E+04 12182 0100 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000802h.evt Total Good Bad: Region Time Phase Cut 12182 6137 6045 0 0 0 Writing events file 6137 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 12182 6137 6045 0 0 0 in 2885.91 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010s000802h.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS0-BRIGHT > filter region ad11502010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT > extract events !xsel:ASCA-SIS0-BRIGHT > save events outfile=ad11502010s000802h_1.ulc use_events=yes Wrote events list to file ad11502010s000802h_1.ulc Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-SIS0-BRIGHT > exit save_session=no-> Extracting unbinned light curve ad11502010s001002h_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 17:07:20 0.13E+04 7600 0010 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s001002h.evt Total Good Bad: Region Time Phase Cut 7600 4745 2855 0 0 0 Writing events file 4745 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 7600 4745 2855 0 0 0 in 1261.90 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010s001002h.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS0-BRIGHT > filter region ad11502010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT > extract events !xsel:ASCA-SIS0-BRIGHT > save events outfile=ad11502010s001002h_1.ulc use_events=yes Wrote events list to file ad11502010s001002h_1.ulc Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-SIS0-BRIGHT > exit save_session=no-> Extracting unbinned light curve ad11502010s001102m_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 20:50:00 0.11E+04 4474 0100 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s001102m.evt Total Good Bad: Region Time Phase Cut 4474 2324 2150 0 0 0 Writing events file 2324 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 4474 2324 2150 0 0 0 in 1059.83 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010s001102m.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS0-BRIGHT > filter region ad11502010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT > extract events !xsel:ASCA-SIS0-BRIGHT > save events outfile=ad11502010s001102m_1.ulc use_events=yes Wrote events list to file ad11502010s001102m_1.ulc Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-SIS0-BRIGHT > exit save_session=no-> Extracting unbinned light curve ad11502010s100102h_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.37E+04 96199 0100 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100102h.evt Total Good Bad: Region Time Phase Cut 96199 87799 8400 0 0 0 Writing events file 87799 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 96199 87799 8400 0 0 0 in 3723.85 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010s100102h.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS1-BRIGHT > filter region ad11502010s132002_1.reg !xsel:ASCA-SIS1-BRIGHT > extract events !xsel:ASCA-SIS1-BRIGHT > save events outfile=ad11502010s100102h_1.ulc use_events=yes Wrote events list to file ad11502010s100102h_1.ulc Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-SIS1-BRIGHT > exit save_session=no-> Extracting unbinned light curve ad11502010s100202m_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 19:15:20 0.21E+04 48215 0100 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100202m.evt Total Good Bad: Region Time Phase Cut 48215 43677 4538 0 0 0 Writing events file 43677 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 48215 43677 4538 0 0 0 in 2122.06 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010s100202m.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS1-BRIGHT > filter region ad11502010s132002_1.reg !xsel:ASCA-SIS1-BRIGHT > extract events !xsel:ASCA-SIS1-BRIGHT > save events outfile=ad11502010s100202m_1.ulc use_events=yes Wrote events list to file ad11502010s100202m_1.ulc Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-SIS1-BRIGHT > exit save_session=no-> Extracting unbinned light curve ad11502010s100302m_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 13:39:04 0.17E+04 25917 0010 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100302m.evt Total Good Bad: Region Time Phase Cut 25917 20225 5692 0 0 0 Writing events file 20225 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 25917 20225 5692 0 0 0 in 1701.24 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010s100302m.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS1-BRIGHT > filter region ad11502010s132002_1.reg !xsel:ASCA-SIS1-BRIGHT > extract events !xsel:ASCA-SIS1-BRIGHT > save events outfile=ad11502010s100302m_1.ulc use_events=yes Wrote events list to file ad11502010s100302m_1.ulc Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-SIS1-BRIGHT > exit save_session=no-> Extracting unbinned light curve ad11502010s100402h_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 14:00:08 0.18E+04 27028 0010 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100402h.evt Total Good Bad: Region Time Phase Cut 27028 21123 5905 0 0 0 Writing events file 21123 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 27028 21123 5905 0 0 0 in 1769.47 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010s100402h.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS1-BRIGHT > filter region ad11502010s132002_1.reg !xsel:ASCA-SIS1-BRIGHT > extract events !xsel:ASCA-SIS1-BRIGHT > save events outfile=ad11502010s100402h_1.ulc use_events=yes Wrote events list to file ad11502010s100402h_1.ulc Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-SIS1-BRIGHT > exit save_session=no-> Extracting unbinned light curve ad11502010s100502m_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 17:30:16 0.46E+04 9231 1000 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100502m.evt Total Good Bad: Region Time Phase Cut 9231 4209 5022 0 0 0 Writing events file 4209 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 9231 4209 5022 0 0 0 in 4586.04 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010s100502m.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS1-BRIGHT > filter region ad11502010s132002_1.reg !xsel:ASCA-SIS1-BRIGHT > extract events !xsel:ASCA-SIS1-BRIGHT > save events outfile=ad11502010s100502m_1.ulc use_events=yes Wrote events list to file ad11502010s100502m_1.ulc Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-SIS1-BRIGHT > exit save_session=no-> Extracting unbinned light curve ad11502010s100802h_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 15:32:24 0.29E+04 5870 0001 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100802h.evt Total Good Bad: Region Time Phase Cut 5870 2076 3794 0 0 0 Writing events file 2076 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 5870 2076 3794 0 0 0 in 2917.91 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010s100802h.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS1-BRIGHT > filter region ad11502010s132002_1.reg !xsel:ASCA-SIS1-BRIGHT > extract events !xsel:ASCA-SIS1-BRIGHT > save events outfile=ad11502010s100802h_1.ulc use_events=yes Wrote events list to file ad11502010s100802h_1.ulc Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-SIS1-BRIGHT > exit save_session=no-> Extracting unbinned light curve ad11502010s101002m_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 20:50:00 0.11E+04 2313 0001 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s101002m.evt Total Good Bad: Region Time Phase Cut 2313 925 1388 0 0 0 Writing events file 925 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 2313 925 1388 0 0 0 in 1059.83 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010s101002m.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS1-BRIGHT > filter region ad11502010s132002_1.reg !xsel:ASCA-SIS1-BRIGHT > extract events !xsel:ASCA-SIS1-BRIGHT > save events outfile=ad11502010s101002m_1.ulc use_events=yes Wrote events list to file ad11502010s101002m_1.ulc Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-SIS1-BRIGHT > exit save_session=no-> Extracting unbinned light curve ad11502010s101102h_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 17:07:20 0.12E+04 2594 1000 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s101102h.evt Total Good Bad: Region Time Phase Cut 2594 1248 1346 0 0 0 Writing events file 1248 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 2594 1248 1346 0 0 0 in 1233.90 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010s101102h.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-SIS1-BRIGHT > filter region ad11502010s132002_1.reg !xsel:ASCA-SIS1-BRIGHT > extract events !xsel:ASCA-SIS1-BRIGHT > save events outfile=ad11502010s101102h_1.ulc use_events=yes Wrote events list to file ad11502010s101102h_1.ulc Changing Data directory from: /data/data15/seq_proc/11502010.006/ to the current working directory. !xsel:ASCA-SIS1-BRIGHT > exit save_session=no
*** tlmFrm Version 1.1 (1997-08-25) *** total number of superframes: 6547 Total of 0 sets of frame data are extracted.
1 ad11502010g200170h.unf 575920 1 ad11502010g200270m.unf 575920 1 ad11502010g200370l.unf 575920 1 ad11502010g200470l.unf 575920-> Fetching GIS2_CALSRC256.2
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.11E+05 372884 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.11E+05 372884 1024 2 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.13E+05 193211 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.11E+05 372884 1024 2 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.13E+05 193211 1024 3 HERC_X-1 PH LOW 25/03/97 15:16:34 0.83E+04 8758 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.11E+05 372884 1024 2 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.13E+05 193211 1024 3 HERC_X-1 PH LOW 25/03/97 15:16:34 0.83E+04 8758 1024 4 HERC_X-1 PH LOW 25/03/97 19:42:10 0.51E+03 1067 1024 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200170h.unf Total Good Bad: Region Time Phase Cut 372884 2151 370733 0 0 0 Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200270m.unf Total Good Bad: Region Time Phase Cut 193211 1462 191749 0 0 0 Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200370l.unf Total Good Bad: Region Time Phase Cut 8758 1339 7419 0 0 0 Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200470l.unf Total Good Bad: Region Time Phase Cut 1067 58 1009 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 575920 5010 570910 0 0 0 in 32655.90 seconds Spectrum has 5010 counts for 0.1534 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - GIS2 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 32656. Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 3.57971E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 1024 No. of legal detector channels NCHAN - 1024 No. of detector channels in dataset PHAVERSN - 1992a OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... --------------------------------------------- ... ...... exiting, changes written to file : ad11502010g220170.cal Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010g200170h.unf Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS2-PH > read events ad11502010g200270m.unf Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 2 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS2-PH > read events ad11502010g200370l.unf Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 3 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS2-PH > read events ad11502010g200470l.unf Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 4 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS2-PH > filter region GIS2_CALSRC256.2 !xsel:ASCA-GIS2-PH > extract spectrum !xsel:ASCA-GIS2-PH > save spectrum ad11502010g220170.cal group=yes Wrote spectrum to ad11502010g220170.cal !xsel:ASCA-GIS2-PH > exit save_session=no-> gis2v4_0.rmf already present in current directory
XSPEC 9.01 00:41:02 4-Mar-98 Plot device not set, use "cpd" to set it Type "help" or "?" for further information !XSPEC> query yes Querying disabled - assuming answer is yes !XSPEC> data ad11502010g220170.cal Net count rate (cts/s) for file 1 0.1534 +/- 2.1692E-03 1 data set is in use !XSPEC> ignore bad !XSPEC> ignore **-4.0 !XSPEC> ignore 8.0-** !XSPEC> model const/b + gauss/b + gauss/b Background components must be from the additive model list mo = constant[1] ) + gaussian/b[2] + gaussian/b[3] Input parameter value, delta, min, bot, top, and max values for ... Mod parameter 1 of component 1 constant factor 1.000 1.0000E-02 0. 0. 1.0000E+10 1.0000E+10 ! Mod parameter 2 of component 2 gaussian LineE 6.500 5.0000E-02 0. 0. 1.0000E+06 1.0000E+06 ! 5.9 Mod parameter 3 of component 2 gaussian Sigma 0.1000 5.0000E-02 0. 0. 10.00 20.00 ! 0.0 Mod parameter 4 of component 2 gaussian norm 1.000 1.0000E-02 0. 0. 1.0000E+24 1.0000E+24 ! Mod parameter 5 of component 3 gaussian LineE 6.500 5.0000E-02 0. 0. 1.0000E+06 1.0000E+06 ! 6.5 Mod parameter 6 of component 3 gaussian Sigma 0.1000 5.0000E-02 0. 0. 10.00 20.00 ! 0.0 Mod parameter 7 of component 3 gaussian norm 1.000 1.0000E-02 0. 0. 1.0000E+24 1.0000E+24 ! --------------------------------------------------------------------------- --------------------------------------------------------------------------- mo = constant[1] ) + gaussian/b[2] + gaussian/b[3] Model Fit Model Component Parameter Value par par comp 1 1 1 constant factor 1.00000 +/- 0. 2 2 2 gaussian/b LineE 5.90000 +/- 0. 3 3 2 gaussian/b Sigma 0. +/- 0. 4 4 2 gaussian/b norm 1.00000 +/- 0. 5 5 3 gaussian/b LineE 6.50000 +/- 0. 6 6 3 gaussian/b Sigma 0. +/- 0. 7 7 3 gaussian/b norm 1.00000 +/- 0. --------------------------------------------------------------------------- --------------------------------------------------------------------------- 7 variable fit parameters Chi-Squared = 1.5729E+06 using 84 PHA bins. Reduced chi-squared = 2.0427E+04 !XSPEC> newpar 5 = 2 1.101005 6 variable fit parameters Chi-Squared = 1.5618E+06 using 84 PHA bins. Reduced chi-squared = 2.0023E+04 !XSPEC> newpar 6 = 3 1.049288 5 variable fit parameters Chi-Squared = 1.5618E+06 using 84 PHA bins. Reduced chi-squared = 1.9769E+04 !XSPEC> renorm Chi-Squared = 1346. using 84 PHA bins. Reduced chi-squared = 17.04 !XSPEC> fit Chi-Squared Lvl Fit param # 1 2 3 4 5 Due to zero model norms fit parameter 1 is temporarily frozen 1073.0 0 1.000 5.893 0.1184 4.0865E-02 3.6628E-02 Due to zero model norms fit parameter 1 is temporarily frozen 594.72 0 1.000 5.867 0.1757 5.7823E-02 3.3047E-02 Due to zero model norms fit parameter 1 is temporarily frozen 379.62 -1 1.000 5.926 0.2118 8.0765E-02 2.2505E-02 Due to zero model norms fit parameter 1 is temporarily frozen 352.84 -2 1.000 6.016 0.2608 9.9873E-02 8.2195E-03 Due to zero model norms fit parameter 1 is temporarily frozen 343.48 -3 1.000 5.956 0.2154 8.9653E-02 1.9267E-02 Due to zero model norms fit parameter 1 is temporarily frozen 336.88 -4 1.000 5.999 0.2448 9.7393E-02 1.0406E-02 Due to zero model norms fit parameter 1 is temporarily frozen 332.70 -5 1.000 5.965 0.2180 9.1207E-02 1.6479E-02 Due to zero model norms fit parameter 1 is temporarily frozen 331.44 -6 1.000 5.989 0.2360 9.5596E-02 1.2031E-02 Due to zero model norms fit parameter 1 is temporarily frozen 330.20 -7 1.000 5.971 0.2218 9.2342E-02 1.5239E-02 Due to zero model norms fit parameter 1 is temporarily frozen 329.94 -8 1.000 5.984 0.2317 9.4698E-02 1.2871E-02 Number of trials exceeded - last iteration delta = 0.2588 Due to zero model norms fit parameter 1 is temporarily frozen 329.51 -9 1.000 5.974 0.2241 9.2960E-02 1.4593E-02 Due to zero model norms fit parameter 1 is temporarily frozen 329.49 -10 1.000 5.981 0.2295 9.4227E-02 1.3324E-02 Due to zero model norms fit parameter 1 is temporarily frozen 329.33 -11 1.000 5.976 0.2255 9.3294E-02 1.4250E-02 Due to zero model norms fit parameter 1 is temporarily frozen 329.28 -1 1.000 5.978 0.2270 9.3658E-02 1.3870E-02 Due to zero model norms fit parameter 1 is temporarily frozen 329.28 2 1.000 5.978 0.2270 9.3659E-02 1.3870E-02 --------------------------------------------------------------------------- --------------------------------------------------------------------------- mo = constant[1] ) + gaussian/b[2] + gaussian/b[3] Model Fit Model Component Parameter Value par par comp 1 1 1 constant factor 1.00000 +/- -1.0000 2 2 2 gaussian/b LineE 5.97824 +/- 0.10573E-01 3 3 2 gaussian/b Sigma 0.226984 +/- 0.10408E-01 4 4 2 gaussian/b norm 9.365851E-02 +/- 0.24274E-02 5 2 3 gaussian/b LineE 6.58207 = par 2 * 1.1010 6 3 3 gaussian/b Sigma 0.238172 = par 3 * 1.0493 7 5 3 gaussian/b norm 1.387004E-02 +/- 0.18357E-02 --------------------------------------------------------------------------- --------------------------------------------------------------------------- Chi-Squared = 329.3 using 84 PHA bins. Reduced chi-squared = 4.168 !XSPEC> setplot energy !XSPEC> iplot data !PLT> label top GIS2 Calibration Source, should peak near 5.9 keV !PLT> log x off !PLT> rescale x 4 8 !PLT> hard /ps !PLT> quit !XSPEC> exit !Do you really want to exit (y) y XSPEC: quit-> Calibration source ad11502010g220170.cal peaks at 5.97824 +/- 0.010573 keV
1 ad11502010g300170h.unf 562835 1 ad11502010g300270m.unf 562835 1 ad11502010g300370l.unf 562835 1 ad11502010g300470l.unf 562835-> Fetching GIS3_CALSRC256.2
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.11E+05 360647 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.11E+05 360647 1024 2 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.13E+05 192742 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.11E+05 360647 1024 2 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.13E+05 192742 1024 3 HERC_X-1 PH LOW 25/03/97 15:16:34 0.83E+04 8371 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.11E+05 360647 1024 2 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.13E+05 192742 1024 3 HERC_X-1 PH LOW 25/03/97 15:16:34 0.83E+04 8371 1024 4 HERC_X-1 PH LOW 25/03/97 19:42:10 0.51E+03 1075 1024 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300170h.unf Total Good Bad: Region Time Phase Cut 360647 1905 358742 0 0 0 Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300270m.unf Total Good Bad: Region Time Phase Cut 192742 1367 191375 0 0 0 Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300370l.unf Total Good Bad: Region Time Phase Cut 8371 1127 7244 0 0 0 Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300470l.unf Total Good Bad: Region Time Phase Cut 1075 56 1019 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 562835 4455 558380 0 0 0 in 32663.90 seconds Spectrum has 4455 counts for 0.1364 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - GIS3 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 32664. Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.83356E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 1024 No. of legal detector channels NCHAN - 1024 No. of detector channels in dataset PHAVERSN - 1992a OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... --------------------------------------------- ... ...... exiting, changes written to file : ad11502010g320170.cal Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !xsel:ASCA > read events ad11502010g300170h.unf Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS3-PH > read events ad11502010g300270m.unf Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 2 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS3-PH > read events ad11502010g300370l.unf Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 3 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS3-PH > read events ad11502010g300470l.unf Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 4 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !xsel:ASCA-GIS3-PH > filter region GIS3_CALSRC256.2 !xsel:ASCA-GIS3-PH > extract spectrum !xsel:ASCA-GIS3-PH > save spectrum ad11502010g320170.cal group=yes Wrote spectrum to ad11502010g320170.cal !xsel:ASCA-GIS3-PH > exit save_session=no-> gis3v4_0.rmf already present in current directory
XSPEC 9.01 00:42:20 4-Mar-98 Plot device not set, use "cpd" to set it Type "help" or "?" for further information !XSPEC> query yes Querying disabled - assuming answer is yes !XSPEC> data ad11502010g320170.cal Net count rate (cts/s) for file 1 0.1364 +/- 2.0455E-03 1 data set is in use !XSPEC> ignore bad !XSPEC> ignore **-4.0 !XSPEC> ignore 8.0-** !XSPEC> model const/b + gauss/b + gauss/b Background components must be from the additive model list mo = constant[1] ) + gaussian/b[2] + gaussian/b[3] Input parameter value, delta, min, bot, top, and max values for ... Mod parameter 1 of component 1 constant factor 1.000 1.0000E-02 0. 0. 1.0000E+10 1.0000E+10 ! Mod parameter 2 of component 2 gaussian LineE 6.500 5.0000E-02 0. 0. 1.0000E+06 1.0000E+06 ! 5.9 Mod parameter 3 of component 2 gaussian Sigma 0.1000 5.0000E-02 0. 0. 10.00 20.00 ! 0.0 Mod parameter 4 of component 2 gaussian norm 1.000 1.0000E-02 0. 0. 1.0000E+24 1.0000E+24 ! Mod parameter 5 of component 3 gaussian LineE 6.500 5.0000E-02 0. 0. 1.0000E+06 1.0000E+06 ! 6.5 Mod parameter 6 of component 3 gaussian Sigma 0.1000 5.0000E-02 0. 0. 10.00 20.00 ! 0.0 Mod parameter 7 of component 3 gaussian norm 1.000 1.0000E-02 0. 0. 1.0000E+24 1.0000E+24 ! --------------------------------------------------------------------------- --------------------------------------------------------------------------- mo = constant[1] ) + gaussian/b[2] + gaussian/b[3] Model Fit Model Component Parameter Value par par comp 1 1 1 constant factor 1.00000 +/- 0. 2 2 2 gaussian/b LineE 5.90000 +/- 0. 3 3 2 gaussian/b Sigma 0. +/- 0. 4 4 2 gaussian/b norm 1.00000 +/- 0. 5 5 3 gaussian/b LineE 6.50000 +/- 0. 6 6 3 gaussian/b Sigma 0. +/- 0. 7 7 3 gaussian/b norm 1.00000 +/- 0. --------------------------------------------------------------------------- --------------------------------------------------------------------------- 7 variable fit parameters Chi-Squared = 1.9499E+06 using 84 PHA bins. Reduced chi-squared = 2.5324E+04 !XSPEC> newpar 5 = 2 1.101005 6 variable fit parameters Chi-Squared = 1.9364E+06 using 84 PHA bins. Reduced chi-squared = 2.4826E+04 !XSPEC> newpar 6 = 3 1.049288 5 variable fit parameters Chi-Squared = 1.9364E+06 using 84 PHA bins. Reduced chi-squared = 2.4512E+04 !XSPEC> renorm Chi-Squared = 1380. using 84 PHA bins. Reduced chi-squared = 17.47 !XSPEC> fit Chi-Squared Lvl Fit param # 1 2 3 4 5 Due to zero model norms fit parameter 1 is temporarily frozen 1132.1 0 1.000 5.893 0.1008 3.4520E-02 2.9854E-02 Due to zero model norms fit parameter 1 is temporarily frozen 545.79 0 1.000 5.865 0.1514 5.3571E-02 2.5909E-02 Due to zero model norms fit parameter 1 is temporarily frozen 309.66 -1 1.000 5.914 0.1752 7.6504E-02 1.6683E-02 Due to zero model norms fit parameter 1 is temporarily frozen 289.71 -2 1.000 5.951 0.1937 8.5504E-02 1.0789E-02 Due to zero model norms fit parameter 1 is temporarily frozen 287.59 -3 1.000 5.938 0.1822 8.3666E-02 1.2568E-02 Due to zero model norms fit parameter 1 is temporarily frozen 287.45 -4 1.000 5.941 0.1838 8.4212E-02 1.2018E-02 Due to zero model norms fit parameter 1 is temporarily frozen 287.40 -5 1.000 5.940 0.1826 8.4033E-02 1.2195E-02 Due to zero model norms fit parameter 1 is temporarily frozen 287.40 -1 1.000 5.941 0.1827 8.4065E-02 1.2162E-02 --------------------------------------------------------------------------- --------------------------------------------------------------------------- mo = constant[1] ) + gaussian/b[2] + gaussian/b[3] Model Fit Model Component Parameter Value par par comp 1 1 1 constant factor 1.00000 +/- -1.0000 2 2 2 gaussian/b LineE 5.94057 +/- 0.86351E-02 3 3 2 gaussian/b Sigma 0.182705 +/- 0.98178E-02 4 4 2 gaussian/b norm 8.406527E-02 +/- 0.20209E-02 5 2 3 gaussian/b LineE 6.54060 = par 2 * 1.1010 6 3 3 gaussian/b Sigma 0.191710 = par 3 * 1.0493 7 5 3 gaussian/b norm 1.216217E-02 +/- 0.13460E-02 --------------------------------------------------------------------------- --------------------------------------------------------------------------- Chi-Squared = 287.4 using 84 PHA bins. Reduced chi-squared = 3.638 !XSPEC> setplot energy !XSPEC> iplot data !PLT> label top GIS3 Calibration Source, should peak near 5.9 keV !PLT> log x off !PLT> rescale x 4 8 !PLT> hard /ps !PLT> quit !XSPEC> exit !Do you really want to exit (y) y XSPEC: quit-> Calibration source ad11502010g320170.cal peaks at 5.94057 +/- 0.0086351 keV
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.39E+04 104095 0001 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/ad11502010s000102h.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010s000102h.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS0-BRIGHT > extract events !earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS0-BRIGHT > exit save_session=no-> Deleting ad11502010s000102h.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 19:15:20 0.31E+04 80695 0001 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/ad11502010s000202m.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010s000202m.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS0-BRIGHT > extract events !earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS0-BRIGHT > exit save_session=no-> Deleting ad11502010s000202m.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 13:39:04 0.30E+04 57400 1000 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000302m.unf Total Good Bad: Region Time Phase Cut 57400 1878 0 55522 0 0 Writing events file 1878 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 57400 1878 0 55522 0 0 in 320.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010s000302m.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS0-BRIGHT > extract events !earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS0-BRIGHT > exit save_session=no-> Cleaning hot pixels from ad11502010s000302m.unf
CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.575E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : F Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: ad11502010s000302m.drk reading data file: event.tmp copying primary header to output file... making chip image... Total counts in chip images : 1878 copy bad pix array... cleaning chip # 0 Hot pixels & counts : 22 1589 Flickering pixels iter, pixels & cnts : 1 2 7 cleaning chip # 1 cleaning chip # 2 cleaning chip # 3 Number of pixels rejected : 24 Number of (internal) image counts : 1878 Number of image cts rejected (N, %) : 1596 84.9840240 By chip : 0 1 2 3 Pixels rejected : 24 0 0 0 Image counts : 1878 0 0 0 Image cts rejected: 1596 0 0 0 Image cts rej (%) : 84.98 0.00 0.00 0.00 filtering data... Total counts : 1878 0 0 0 Total cts rejected: 1596 0 0 0 Total cts rej (%) : 84.98 0.00 0.00 0.00 Number of clean counts accepted : 282 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 24 updating NEVENTS keywords... closing data file... closing clean file...-> Extracting bright and dark Earth events from ad11502010s000402m.unf
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 17:30:16 0.58E+04 47792 0010 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/ad11502010s000402m.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010s000402m.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS0-BRIGHT > extract events !earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS0-BRIGHT > exit save_session=no-> Deleting ad11502010s000402m.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 14:00:08 0.24E+04 46908 1000 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/ad11502010s000502h.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010s000502h.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS0-BRIGHT > extract events !earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS0-BRIGHT > exit save_session=no-> Deleting ad11502010s000502h.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT LOW 25/03/97 18:24:08 0.40E+04 26780 0001 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000602l.unf Total Good Bad: Region Time Phase Cut 26780 833 0 25947 0 0 Writing events file 833 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 26780 833 0 25947 0 0 in 576.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010s000602l.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS0-BRIGHT > extract events !earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS0-BRIGHT > exit save_session=no-> Cleaning hot pixels from ad11502010s000602l.unf
CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.575E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : F Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: ad11502010s000602l.drk reading data file: event.tmp copying primary header to output file... making chip image... Total counts in chip images : 833 copy bad pix array... cleaning chip # 0 cleaning chip # 1 cleaning chip # 2 cleaning chip # 3 Hot pixels & counts : 2 170 Number of pixels rejected : 2 Number of (internal) image counts : 833 Number of image cts rejected (N, %) : 170 20.4081631 By chip : 0 1 2 3 Pixels rejected : 0 0 0 2 Image counts : 0 0 0 833 Image cts rejected: 0 0 0 170 Image cts rej (%) : 0.00 0.00 0.00 20.41 filtering data... Total counts : 0 0 0 833 Total cts rejected: 0 0 0 170 Total cts rej (%) : 0.00 0.00 0.00 20.41 Number of clean counts accepted : 663 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 2 updating NEVENTS keywords... closing data file... closing clean file...-> Extracting bright and dark Earth events from ad11502010s000702l.unf
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT LOW 25/03/97 16:49:12 0.34E+04 22333 0010 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000702l.unf Total Good Bad: Region Time Phase Cut 22333 974 0 21359 0 0 Writing events file 974 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 22333 974 0 21359 0 0 in 608.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010s000702l.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS0-BRIGHT > extract events !earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS0-BRIGHT > exit save_session=no-> Cleaning hot pixels from ad11502010s000702l.unf
CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.575E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : F Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: ad11502010s000702l.drk reading data file: event.tmp copying primary header to output file... making chip image... Total counts in chip images : 974 copy bad pix array... cleaning chip # 0 cleaning chip # 1 cleaning chip # 2 Hot pixels & counts : 1 107 Flickering pixels iter, pixels & cnts : 1 4 14 cleaning chip # 3 Number of pixels rejected : 5 Number of (internal) image counts : 974 Number of image cts rejected (N, %) : 121 12.4229975 By chip : 0 1 2 3 Pixels rejected : 0 0 5 0 Image counts : 0 0 974 0 Image cts rejected: 0 0 121 0 Image cts rej (%) : 0.00 0.00 12.42 0.00 filtering data... Total counts : 0 0 974 0 Total cts rejected: 0 0 121 0 Total cts rej (%) : 0.00 0.00 12.42 0.00 Number of clean counts accepted : 853 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 5 updating NEVENTS keywords... closing data file... closing clean file...-> Extracting bright and dark Earth events from ad11502010s000802h.unf
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 15:32:24 0.31E+04 20023 0100 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/ad11502010s000802h.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010s000802h.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS0-BRIGHT > extract events !earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS0-BRIGHT > exit save_session=no-> Deleting ad11502010s000802h.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT LOW 25/03/97 15:11:04 0.21E+04 13459 0100 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s000902l.unf Total Good Bad: Region Time Phase Cut 13459 478 0 12981 0 0 Writing events file 478 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 13459 478 0 12981 0 0 in 288.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010s000902l.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS0-BRIGHT > extract events !earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS0-BRIGHT > exit save_session=no-> Cleaning hot pixels from ad11502010s000902l.unf
CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.575E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : F Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: ad11502010s000902l.drk reading data file: event.tmp copying primary header to output file... making chip image... Total counts in chip images : 478 copy bad pix array... cleaning chip # 0 cleaning chip # 1 Hot pixels & counts : 2 79 cleaning chip # 2 cleaning chip # 3 Number of pixels rejected : 2 Number of (internal) image counts : 478 Number of image cts rejected (N, %) : 79 16.5271969 By chip : 0 1 2 3 Pixels rejected : 0 2 0 0 Image counts : 0 478 0 0 Image cts rejected: 0 79 0 0 Image cts rej (%) : 0.00 16.53 0.00 0.00 filtering data... Total counts : 0 478 0 0 Total cts rejected: 0 79 0 0 Total cts rej (%) : 0.00 16.53 0.00 0.00 Number of clean counts accepted : 399 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 2 updating NEVENTS keywords... closing data file... closing clean file...-> Extracting bright and dark Earth events from ad11502010s001002h.unf
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 17:07:20 0.14E+04 11972 0010 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/ad11502010s001002h.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010s001002h.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS0-BRIGHT > extract events !earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS0-BRIGHT > exit save_session=no-> Deleting ad11502010s001002h.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 20:50:00 0.13E+04 9412 0100 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/ad11502010s001102m.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010s001102m.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS0-BRIGHT > extract events !earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS0-BRIGHT > exit save_session=no-> Deleting ad11502010s001102m.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 HERC_X-1 BRIGHT LOW 25/03/97 20:00:08 0.10E+04 7564 1000 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s001202l.unf Total Good Bad: Region Time Phase Cut 7564 1877 0 5687 0 0 Writing events file 1877 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 7564 1877 0 5687 0 0 in 306.93 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010s001202l.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS0-BRIGHT > extract events !earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS0-BRIGHT > exit save_session=no-> Cleaning hot pixels from ad11502010s001202l.unf
CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.575E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : F Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: ad11502010s001202l.drk reading data file: event.tmp copying primary header to output file... making chip image... Total counts in chip images : 1877 copy bad pix array... cleaning chip # 0 Hot pixels & counts : 21 1456 Flickering pixels iter, pixels & cnts : 1 3 17 cleaning chip # 1 cleaning chip # 2 cleaning chip # 3 Number of pixels rejected : 24 Number of (internal) image counts : 1877 Number of image cts rejected (N, %) : 1473 78.4762955 By chip : 0 1 2 3 Pixels rejected : 24 0 0 0 Image counts : 1877 0 0 0 Image cts rejected: 1473 0 0 0 Image cts rej (%) : 78.48 0.00 0.00 0.00 filtering data... Total counts : 1877 0 0 0 Total cts rejected: 1473 0 0 0 Total cts rej (%) : 78.48 0.00 0.00 0.00 Number of clean counts accepted : 404 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 24 updating NEVENTS keywords... closing data file... closing clean file...-> Extracting bright and dark Earth events from ad11502010s100102h.unf
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 18:43:20 0.39E+04 136420 0100 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/ad11502010s100102h.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010s100102h.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS1-BRIGHT > extract events !earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS1-BRIGHT > exit save_session=no-> Deleting ad11502010s100102h.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 19:15:20 0.31E+04 97061 0100 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/ad11502010s100202m.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010s100202m.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS1-BRIGHT > extract events !earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS1-BRIGHT > exit save_session=no-> Deleting ad11502010s100202m.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 13:39:04 0.30E+04 57658 0010 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100302m.unf Total Good Bad: Region Time Phase Cut 57658 864 0 56794 0 0 Writing events file 864 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 57658 864 0 56794 0 0 in 320.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010s100302m.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS1-BRIGHT > extract events !earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS1-BRIGHT > exit save_session=no-> Cleaning hot pixels from ad11502010s100302m.unf
CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.575E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : F Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: ad11502010s100302m.drk reading data file: event.tmp copying primary header to output file... making chip image... Total counts in chip images : 864 copy bad pix array... cleaning chip # 0 cleaning chip # 1 cleaning chip # 2 Hot pixels & counts : 6 394 cleaning chip # 3 Number of pixels rejected : 6 Number of (internal) image counts : 864 Number of image cts rejected (N, %) : 394 45.6018524 By chip : 0 1 2 3 Pixels rejected : 0 0 6 0 Image counts : 0 0 864 0 Image cts rejected: 0 0 394 0 Image cts rej (%) : 0.00 0.00 45.60 0.00 filtering data... Total counts : 0 0 864 0 Total cts rejected: 0 0 394 0 Total cts rej (%) : 0.00 0.00 45.60 0.00 Number of clean counts accepted : 470 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 6 updating NEVENTS keywords... closing data file... closing clean file...-> Extracting bright and dark Earth events from ad11502010s100402h.unf
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 14:00:08 0.24E+04 56616 0010 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/ad11502010s100402h.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010s100402h.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS1-BRIGHT > extract events !earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS1-BRIGHT > exit save_session=no-> Deleting ad11502010s100402h.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 17:30:16 0.58E+04 29275 1000 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/ad11502010s100502m.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010s100502m.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS1-BRIGHT > extract events !earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS1-BRIGHT > exit save_session=no-> Deleting ad11502010s100502m.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT LOW 25/03/97 18:24:08 0.40E+04 27477 0100 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100602l.unf Total Good Bad: Region Time Phase Cut 27477 2112 0 25365 0 0 Writing events file 2112 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 27477 2112 0 25365 0 0 in 576.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010s100602l.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS1-BRIGHT > extract events !earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS1-BRIGHT > exit save_session=no-> Cleaning hot pixels from ad11502010s100602l.unf
CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.575E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : F Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: ad11502010s100602l.drk reading data file: event.tmp copying primary header to output file... making chip image... Total counts in chip images : 2112 copy bad pix array... cleaning chip # 0 cleaning chip # 1 Hot pixels & counts : 11 1324 Flickering pixels iter, pixels & cnts : 1 4 14 cleaning chip # 2 cleaning chip # 3 Number of pixels rejected : 15 Number of (internal) image counts : 2112 Number of image cts rejected (N, %) : 1338 63.3522720 By chip : 0 1 2 3 Pixels rejected : 0 15 0 0 Image counts : 0 2112 0 0 Image cts rejected: 0 1338 0 0 Image cts rej (%) : 0.00 63.35 0.00 0.00 filtering data... Total counts : 0 2112 0 0 Total cts rejected: 0 1338 0 0 Total cts rej (%) : 0.00 63.35 0.00 0.00 Number of clean counts accepted : 774 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 15 updating NEVENTS keywords... closing data file... closing clean file...-> Extracting bright and dark Earth events from ad11502010s100702l.unf
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT LOW 25/03/97 16:49:12 0.34E+04 19842 1000 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100702l.unf Total Good Bad: Region Time Phase Cut 19842 1647 0 18195 0 0 Writing events file 1647 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 19842 1647 0 18195 0 0 in 608.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010s100702l.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS1-BRIGHT > extract events !earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS1-BRIGHT > exit save_session=no-> Cleaning hot pixels from ad11502010s100702l.unf
CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.575E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : F Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: ad11502010s100702l.drk reading data file: event.tmp copying primary header to output file... making chip image... Total counts in chip images : 1647 copy bad pix array... cleaning chip # 0 Hot pixels & counts : 6 544 Flickering pixels iter, pixels & cnts : 1 4 25 cleaning chip # 1 cleaning chip # 2 cleaning chip # 3 Number of pixels rejected : 10 Number of (internal) image counts : 1647 Number of image cts rejected (N, %) : 569 34.5476608 By chip : 0 1 2 3 Pixels rejected : 10 0 0 0 Image counts : 1647 0 0 0 Image cts rejected: 569 0 0 0 Image cts rej (%) : 34.55 0.00 0.00 0.00 filtering data... Total counts : 1647 0 0 0 Total cts rejected: 569 0 0 0 Total cts rej (%) : 34.55 0.00 0.00 0.00 Number of clean counts accepted : 1078 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 10 updating NEVENTS keywords... closing data file... closing clean file...-> Extracting bright and dark Earth events from ad11502010s100802h.unf
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 15:32:24 0.32E+04 16373 0001 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/ad11502010s100802h.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010s100802h.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS1-BRIGHT > extract events !earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS1-BRIGHT > exit save_session=no-> Deleting ad11502010s100802h.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT LOW 25/03/97 15:11:04 0.22E+04 13128 0001 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s100902l.unf Total Good Bad: Region Time Phase Cut 13128 714 0 12414 0 0 Writing events file 714 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 13128 714 0 12414 0 0 in 288.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010s100902l.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS1-BRIGHT > extract events !earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS1-BRIGHT > exit save_session=no-> Cleaning hot pixels from ad11502010s100902l.unf
CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.575E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : F Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: ad11502010s100902l.drk reading data file: event.tmp copying primary header to output file... making chip image... Total counts in chip images : 714 copy bad pix array... cleaning chip # 0 cleaning chip # 1 cleaning chip # 2 cleaning chip # 3 Hot pixels & counts : 7 392 Flickering pixels iter, pixels & cnts : 1 2 12 Number of pixels rejected : 9 Number of (internal) image counts : 714 Number of image cts rejected (N, %) : 404 56.5826340 By chip : 0 1 2 3 Pixels rejected : 0 0 0 9 Image counts : 0 0 0 714 Image cts rejected: 0 0 0 404 Image cts rej (%) : 0.00 0.00 0.00 56.58 filtering data... Total counts : 0 0 0 714 Total cts rejected: 0 0 0 404 Total cts rej (%) : 0.00 0.00 0.00 56.58 Number of clean counts accepted : 310 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 9 updating NEVENTS keywords... closing data file... closing clean file...-> Extracting bright and dark Earth events from ad11502010s101002m.unf
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT MEDIUM 25/03/97 20:50:00 0.13E+04 7965 0001 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/ad11502010s101002m.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010s101002m.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS1-BRIGHT > extract events !earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS1-BRIGHT > exit save_session=no-> Deleting ad11502010s101002m.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT HIGH 25/03/97 17:07:20 0.14E+04 6698 1000 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/ad11502010s101102h.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010s101102h.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS1-BRIGHT > extract events !earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS1-BRIGHT > exit save_session=no-> Deleting ad11502010s101102h.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 HERC_X-1 BRIGHT LOW 25/03/97 20:00:08 0.10E+04 5548 0010 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010s101202l.unf Total Good Bad: Region Time Phase Cut 5548 787 0 4761 0 0 Writing events file 787 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 5548 787 0 4761 0 0 in 306.93 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010s101202l.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 4.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS1-BRIGHT > extract events !earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS1-BRIGHT > exit save_session=no-> Cleaning hot pixels from ad11502010s101202l.unf
CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.575E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : F Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: ad11502010s101202l.drk reading data file: event.tmp copying primary header to output file... making chip image... Total counts in chip images : 787 copy bad pix array... cleaning chip # 0 cleaning chip # 1 cleaning chip # 2 Hot pixels & counts : 5 338 cleaning chip # 3 Number of pixels rejected : 5 Number of (internal) image counts : 787 Number of image cts rejected (N, %) : 338 42.9479027 By chip : 0 1 2 3 Pixels rejected : 0 0 5 0 Image counts : 0 0 787 0 Image cts rejected: 0 0 338 0 Image cts rej (%) : 0.00 0.00 42.95 0.00 filtering data... Total counts : 0 0 787 0 Total cts rejected: 0 0 338 0 Total cts rej (%) : 0.00 0.00 42.95 0.00 Number of clean counts accepted : 449 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 5 updating NEVENTS keywords... closing data file... closing clean file...-> Extracting bright and dark Earth events from ad11502010g200170h.unf
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.11E+05 372884 1024 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/ad11502010g200170h.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010g200170h.unf Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-GIS2-PH > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS2-PH > extract events !earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS2-PH > exit save_session=no-> Deleting ad11502010g200170h.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.11E+05 372884 1024 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/ad11502010g200170h.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010g200170h.unf Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-GIS2-PH > select mkf "FOV==2" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS2-PH > extract events !earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS2-PH > exit save_session=no-> Deleting ad11502010g200170h.brt since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.13E+05 193211 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200270m.unf Total Good Bad: Region Time Phase Cut 193211 197 0 193014 0 0 Writing events file 197 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 193211 197 0 193014 0 0 in 320.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010g200270m.unf Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-GIS2-PH > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS2-PH > extract events !earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS2-PH > exit save_session=no-> Extracting ad11502010g200270m.brt
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.13E+05 193211 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200270m.unf Total Good Bad: Region Time Phase Cut 193211 420 0 192791 0 0 Writing events file 420 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 193211 420 0 192791 0 0 in 592.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010g200270m.unf Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-GIS2-PH > select mkf "FOV==2" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS2-PH > extract events !earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS2-PH > exit save_session=no-> Extracting bright and dark Earth events from ad11502010g200370l.unf
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH LOW 25/03/97 15:16:34 0.83E+04 8758 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200370l.unf Total Good Bad: Region Time Phase Cut 8758 1118 0 7640 0 0 Writing events file 1118 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 8758 1118 0 7640 0 0 in 1791.82 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010g200370l.unf Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-GIS2-PH > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS2-PH > extract events !earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS2-PH > exit save_session=no-> Extracting ad11502010g200370l.brt
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH LOW 25/03/97 15:16:34 0.83E+04 8758 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200370l.unf Total Good Bad: Region Time Phase Cut 8758 5612 0 3146 0 0 Writing events file 5612 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 8758 5612 0 3146 0 0 in 5824.36 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010g200370l.unf Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-GIS2-PH > select mkf "FOV==2" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS2-PH > extract events !earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS2-PH > exit save_session=no-> Extracting bright and dark Earth events from ad11502010g200470l.unf
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH LOW 25/03/97 19:42:10 0.51E+03 1067 1024 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/ad11502010g200470l.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010g200470l.unf Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-GIS2-PH > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS2-PH > extract events !earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS2-PH > exit save_session=no-> Deleting ad11502010g200470l.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH LOW 25/03/97 19:42:10 0.51E+03 1067 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g200470l.unf Total Good Bad: Region Time Phase Cut 1067 125 0 942 0 0 Writing events file 125 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1067 125 0 942 0 0 in 159.70 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010g200470l.unf Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-GIS2-PH > select mkf "FOV==2" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS2-PH > extract events !earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS2-PH > exit save_session=no-> Extracting bright and dark Earth events from ad11502010g300170h.unf
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.11E+05 360647 1024 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/ad11502010g300170h.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010g300170h.unf Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-GIS3-PH > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS3-PH > extract events !earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS3-PH > exit save_session=no-> Deleting ad11502010g300170h.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH HIGH 25/03/97 14:00:18 0.11E+05 360647 1024 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/ad11502010g300170h.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010g300170h.unf Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-GIS3-PH > select mkf "FOV==2" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS3-PH > extract events !earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS3-PH > exit save_session=no-> Deleting ad11502010g300170h.brt since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.13E+05 192742 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300270m.unf Total Good Bad: Region Time Phase Cut 192742 223 0 192519 0 0 Writing events file 223 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 192742 223 0 192519 0 0 in 320.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010g300270m.unf Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-GIS3-PH > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS3-PH > extract events !earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS3-PH > exit save_session=no-> Extracting ad11502010g300270m.brt
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH MEDIUM 25/03/97 13:39:14 0.13E+05 192742 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300270m.unf Total Good Bad: Region Time Phase Cut 192742 406 0 192336 0 0 Writing events file 406 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 192742 406 0 192336 0 0 in 592.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010g300270m.unf Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-GIS3-PH > select mkf "FOV==2" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS3-PH > extract events !earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS3-PH > exit save_session=no-> Extracting bright and dark Earth events from ad11502010g300370l.unf
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH LOW 25/03/97 15:16:34 0.83E+04 8371 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300370l.unf Total Good Bad: Region Time Phase Cut 8371 1051 0 7320 0 0 Writing events file 1051 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 8371 1051 0 7320 0 0 in 1791.82 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010g300370l.unf Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-GIS3-PH > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS3-PH > extract events !earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS3-PH > exit save_session=no-> Extracting ad11502010g300370l.brt
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH LOW 25/03/97 15:16:34 0.83E+04 8371 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300370l.unf Total Good Bad: Region Time Phase Cut 8371 5316 0 3055 0 0 Writing events file 5316 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 8371 5316 0 3055 0 0 in 5824.36 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010g300370l.unf Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-GIS3-PH > select mkf "FOV==2" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS3-PH > extract events !earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS3-PH > exit save_session=no-> Extracting bright and dark Earth events from ad11502010g300470l.unf
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH LOW 25/03/97 19:42:10 0.51E+03 1075 1024 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data15/seq_proc/11502010.006/ad11502010g300470l.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010g300470l.unf Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-GIS3-PH > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS3-PH > extract events !earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS3-PH > exit save_session=no-> Deleting ad11502010g300470l.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 HERC_X-1 PH LOW 25/03/97 19:42:10 0.51E+03 1075 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data15/seq_proc/11502010.006/ad11502010g300470l.unf Total Good Bad: Region Time Phase Cut 1075 134 0 941 0 0 Writing events file 134 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1075 134 0 941 0 0 in 159.70 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data15/seq_proc/11502010.006/ Setting mkf directory to /data/data15/seq_proc/11502010.006/ !earthevents:ASCA > read events ad11502010g300470l.unf Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 2.0000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data15/seq_proc/11502010.006/ HK Directory is: /data/data15/seq_proc/11502010.006/ !earthevents:ASCA-GIS3-PH > select mkf "FOV==2" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS3-PH > extract events !earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS3-PH > exit save_session=no
Offset of 1.500000000000000E+08 from 1/1/93 0:0:0 is date and time (including leapseconds) = 3/10/97 2:39:56.000000 Modified Julian Day = 50724.111064814816928
ad11502010s000102h.unf|S0CCDPOW|0001|Which S0 CCDs are in use(0123): 0=OFF 1=ON ad11502010s000502h.unf|S0CCDPOW|1000|Which S0 CCDs are in use(0123): 0=OFF 1=ON ad11502010s000802h.unf|S0CCDPOW|0100|Which S0 CCDs are in use(0123): 0=OFF 1=ON ad11502010s001002h.unf|S0CCDPOW|0010|Which S0 CCDs are in use(0123): 0=OFF 1=ON ad11502010s000102h.unf|S0CCDLST|3 3 3 3|S0 CCD readout order ad11502010s000502h.unf|S0CCDLST|0 0 0 0|S0 CCD readout order ad11502010s000802h.unf|S0CCDLST|1 1 1 1|S0 CCD readout order ad11502010s001002h.unf|S0CCDLST|2 2 2 2|S0 CCD readout order-> listing ad11502010s000102h.unf
ad11502010s000202m.unf|S0CCDPOW|0001|Which S0 CCDs are in use(0123): 0=OFF 1=ON ad11502010s000302m.unf|S0CCDPOW|1000|Which S0 CCDs are in use(0123): 0=OFF 1=ON ad11502010s000402m.unf|S0CCDPOW|0010|Which S0 CCDs are in use(0123): 0=OFF 1=ON ad11502010s001102m.unf|S0CCDPOW|0100|Which S0 CCDs are in use(0123): 0=OFF 1=ON ad11502010s000202m.unf|S0CCDLST|3 3 3 3|S0 CCD readout order ad11502010s000302m.unf|S0CCDLST|0 0 0 0|S0 CCD readout order ad11502010s000402m.unf|S0CCDLST|2 2 2 2|S0 CCD readout order ad11502010s001102m.unf|S0CCDLST|1 1 1 1|S0 CCD readout order-> listing ad11502010s000202m.unf
ad11502010s000602l.unf|S0CCDPOW|0001|Which S0 CCDs are in use(0123): 0=OFF 1=ON ad11502010s000702l.unf|S0CCDPOW|0010|Which S0 CCDs are in use(0123): 0=OFF 1=ON ad11502010s000902l.unf|S0CCDPOW|0100|Which S0 CCDs are in use(0123): 0=OFF 1=ON ad11502010s001202l.unf|S0CCDPOW|1000|Which S0 CCDs are in use(0123): 0=OFF 1=ON ad11502010s000602l.unf|S0CCDLST|3 3 3 3|S0 CCD readout order ad11502010s000702l.unf|S0CCDLST|2 2 2 2|S0 CCD readout order ad11502010s000902l.unf|S0CCDLST|1 1 1 1|S0 CCD readout order ad11502010s001202l.unf|S0CCDLST|0 0 0 0|S0 CCD readout order-> listing ad11502010s000602l.unf
ad11502010s100102h.unf|S1CCDPOW|0100|Which S1 CCDs are in use(0123): 0=OFF 1=ON ad11502010s100402h.unf|S1CCDPOW|0010|Which S1 CCDs are in use(0123): 0=OFF 1=ON ad11502010s100802h.unf|S1CCDPOW|0001|Which S1 CCDs are in use(0123): 0=OFF 1=ON ad11502010s101102h.unf|S1CCDPOW|1000|Which S1 CCDs are in use(0123): 0=OFF 1=ON ad11502010s100102h.unf|S1CCDLST|1 1 1 1|S1 CCD readout order ad11502010s100402h.unf|S1CCDLST|2 2 2 2|S1 CCD readout order ad11502010s100802h.unf|S1CCDLST|3 3 3 3|S1 CCD readout order ad11502010s101102h.unf|S1CCDLST|0 0 0 0|S1 CCD readout order-> listing ad11502010s100102h.unf
ad11502010s100202m.unf|S1CCDPOW|0100|Which S1 CCDs are in use(0123): 0=OFF 1=ON ad11502010s100302m.unf|S1CCDPOW|0010|Which S1 CCDs are in use(0123): 0=OFF 1=ON ad11502010s100502m.unf|S1CCDPOW|1000|Which S1 CCDs are in use(0123): 0=OFF 1=ON ad11502010s101002m.unf|S1CCDPOW|0001|Which S1 CCDs are in use(0123): 0=OFF 1=ON ad11502010s100202m.unf|S1CCDLST|1 1 1 1|S1 CCD readout order ad11502010s100302m.unf|S1CCDLST|2 2 2 2|S1 CCD readout order ad11502010s100502m.unf|S1CCDLST|0 0 0 0|S1 CCD readout order ad11502010s101002m.unf|S1CCDLST|3 3 3 3|S1 CCD readout order-> listing ad11502010s100202m.unf
ad11502010s100602l.unf|S1CCDPOW|0100|Which S1 CCDs are in use(0123): 0=OFF 1=ON ad11502010s100702l.unf|S1CCDPOW|1000|Which S1 CCDs are in use(0123): 0=OFF 1=ON ad11502010s100902l.unf|S1CCDPOW|0001|Which S1 CCDs are in use(0123): 0=OFF 1=ON ad11502010s101202l.unf|S1CCDPOW|0010|Which S1 CCDs are in use(0123): 0=OFF 1=ON ad11502010s100602l.unf|S1CCDLST|1 1 1 1|S1 CCD readout order ad11502010s100702l.unf|S1CCDLST|0 0 0 0|S1 CCD readout order ad11502010s100902l.unf|S1CCDLST|3 3 3 3|S1 CCD readout order ad11502010s101202l.unf|S1CCDLST|2 2 2 2|S1 CCD readout order-> listing ad11502010s100602l.unf
ad11502010g200370l.unf|SP_A_L_P|0|Spread discri A_L for POW2 method (0-255) ad11502010g200470l.unf|SP_A_L_P|255|Spread discri A_L for POW2 method (0-255) ad11502010g200370l.unf|SP_B_P|0|Spread discri B for POW2 method (0-255) ad11502010g200470l.unf|SP_B_P|255|Spread discri B for POW2 method (0-255) ad11502010g200370l.unf|SP_C_P|0|Spread discri C for POW2 method (0-255) ad11502010g200470l.unf|SP_C_P|255|Spread discri C for POW2 method (0-255) ad11502010g200370l.unf|SP_A_L_F|80|Spread discri A_L for FLF method (0-255) ad11502010g200470l.unf|SP_A_L_F|0|Spread discri A_L for FLF method (0-255) ad11502010g200370l.unf|SP_A_U_F|239|Spread discri A_U for FLF method (0-255) ad11502010g200470l.unf|SP_A_U_F|0|Spread discri A_U for FLF method (0-255) ad11502010g200370l.unf|SP_B_F|226|Spread discri B for FLF method (0-255) ad11502010g200470l.unf|SP_B_F|120|Spread discri B for FLF method (0-255) ad11502010g200370l.unf|SP_C_F|0|Spread discri C for FLF method (0-255) ad11502010g200470l.unf|SP_C_F|120|Spread discri C for FLF method (0-255) ad11502010g200370l.unf|SP_PH_F|0|Spread discri PH for FLF method (0-1023) ad11502010g200470l.unf|SP_PH_F|31098|Spread discri PH for FLF method (0-1023)-> listing ad11502010g200370l.unf
ad11502010g300370l.unf|SP_A_L_P|0|Spread discri A_L for POW2 method (0-255) ad11502010g300470l.unf|SP_A_L_P|255|Spread discri A_L for POW2 method (0-255) ad11502010g300370l.unf|SP_B_P|0|Spread discri B for POW2 method (0-255) ad11502010g300470l.unf|SP_B_P|255|Spread discri B for POW2 method (0-255) ad11502010g300370l.unf|SP_C_P|0|Spread discri C for POW2 method (0-255) ad11502010g300470l.unf|SP_C_P|255|Spread discri C for POW2 method (0-255) ad11502010g300370l.unf|SP_A_L_F|80|Spread discri A_L for FLF method (0-255) ad11502010g300470l.unf|SP_A_L_F|0|Spread discri A_L for FLF method (0-255) ad11502010g300370l.unf|SP_A_U_F|232|Spread discri A_U for FLF method (0-255) ad11502010g300470l.unf|SP_A_U_F|0|Spread discri A_U for FLF method (0-255) ad11502010g300370l.unf|SP_B_F|224|Spread discri B for FLF method (0-255) ad11502010g300470l.unf|SP_B_F|120|Spread discri B for FLF method (0-255) ad11502010g300370l.unf|SP_C_F|0|Spread discri C for FLF method (0-255) ad11502010g300470l.unf|SP_C_F|120|Spread discri C for FLF method (0-255) ad11502010g300370l.unf|SP_PH_F|0|Spread discri PH for FLF method (0-1023) ad11502010g300470l.unf|SP_PH_F|31353|Spread discri PH for FLF method (0-1023)-> listing ad11502010g300370l.unf
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Doing inventory of all files