Thursday, October 14

3:00 - 6:00 p.m.; Grand Ballroom D-G; Chairs: F.A. Garner, PNNL, USA and Y. Katoh, Kyoto University, Japan

Session 17 POSTERS

Plasma Facing Components, Irradiated Mechanical Properties, Facilities and Test Techniques

17.01 MANUFACTURING AND TESTING OF A PROTOTYPICAL DIVERTOR VERTICAL TARGET FOR ITER M. Merola, L. Plöechl, Ph. Chappuis, F. Escourbiac, M. Grattarola, I. Smid, R. Tivey, and G. Vieider

17.02 TUNGSTEN FILAMENT MOCK-UPS FOR GAS BOX LINER C. Cazzola, J. Boscary, and R. Matera

17.03 BRITTLE DESTRUCTION OF CARBON BASED MATERIALS DUE TO SEVERE THERMAL SHOCKS S. Pestchanyi, N. Usov, and H. Würz

17.04 THE THERMAL SHOCK ON THE COATINGS AND SiCf/SiC J. Yu, Z. Yao, F. Chu, and X. Tang

17.05 NONDESTRUCTIVE TEST TECHNIQUE FOR MATERIALS AND COMPONENTS OF FUSION REACTOR BY MEANS OF INFRARED THERMOGRAPHY| T. Ishii, N. Ooka, M. Akiba, M. Eto, T. Inagaki, and Y. Okamoto

17.06 INFRARED CHARACTERIZATION AND HIGH HEAT FLUX TESTING OF PLASMA SPRAYED LAYERS Ph. Chappuis, F. Escourbiac, M. Chantant, M. Febvre, M. Grattarola, M. Bet, and M. Merola

17.07 DEVELOPMENT OF BRUSH ARMOR FOR HIGH HEAT FLUX APPLICATIONS J.S. O'Dell and T.N. McKechnie

17.08 INVESTIGATION OF NEGATIVE TRANSFERRED-ARC CLEANING FOR REMOVAL OF DEUTERIUM CONTAINING IMPURITY FILMS R.G. Castro, K.J. Hollis, C.J. Maggiore, and B.D. Bartram

17.09 MATERIAL MIXING PROCESSES ON HIGH HEAT FLUX COMPONENTS M. Rubel, B. Emmoth, V. Philipps, J. von Seggern, T. Tanabe, and P. Wienhold

17.10 CODEPOSITION OF DEUTERIUM IONS WITH BERYLLIUM OXIDE AT ELEVATED TEMPERATURES A.V. Markin, V.P. Dubkov, A.E. Gorodetsky, M.A. Negodaev, N.V. Rozhanskii, F. Scaffidi-Argentina, H. Werle, C.H. Wu, R.Kh. Zalavutdinov, and A.P. Zakharov

17.11 SPUTTERING STUDIES OF BERYLLIUM WITH HELIUM AND DEUTERIUM USING MOLECULAR DYNAMICS APPROACH S. Ueda, T. Ohsaka, and S. Kuwajima

17.12 RESULTS OF HHF TESTS AND METALLOGRAPHIC INVESTIGATION OF BERYLLIUM HHF MOCKUPS R. Giniyatulin, V. Komarov, I. Mazul, N. Yablokov, R. Watson, C. Cadden, and N. Yang

17.13 EFFECTS OF PLASMA DISRUPTION EVENTS ON ITER FIRST WALL PLASMA FACING MATERIALS A. Cardella, H. Gorenflo, A. Lodato, K. Ioki, and R. Raffray

17.14 EROSION MECHANISMS AND PRODUCTS IN GRAPHITE TARGETS UNDER SIMULATED DISRUPTION CONDITIONS F. Scaffidi-Argentina, V. Safronov, I. Arkhipov, N. Arkhipov, V. Bakhtin, V. Barsuk, S. Kurkin, E. Mironova, D. Toporkov, S. Vasenin, H. Werle, H. Würz, and A. Zhitlukhin

17.15 CHEMICAL EROSION OF GRAPHITE IRRADIATED BY HIGH FLUX DEUTERIUM BEAM Y. Ohtsuka, M. Isobe, Y. Ueda, and M. Nishikawa

17.16 HIGH HEAT LOAD TESTING OF B4C/Cu FUNCTIONALLY GRADED MATERIALS FOR PFM AND DIVERTOR COMPONENTS APPLICATION X. Liu, Z. Xiao, Z. Xu, Jiming Chen, C. Ge, and J. Li

17.17 DEVELOPMENT OF FUNCTIONALLY GRADED PLASMA-FACING MATERIALS C.-C. Ge, J.-T. Li, Z.-J. Zhou, W.B. Cao, M.-X. Wang, N.-M. Zhang, X. Liu, and Z.-Y. Xu

17.18 INVESTIGATION OF NORMAL REGIME AND DISRUPTION PLASMA ACTION ON DIVERTOR MATERIALS OF FUSION REACTOR Yu.V. Martynenko, M.I. Guseva, V.I. Vasiliev, V.M. Gureev, L.S. Danelyan, V.B. Petrov, B.I. Khripunov, A.A. Shapkin, and V.M. Strunnikov

17.19 CHANGES OF COMPOSITION AND MICROSTRUCTURE OF JOINT INTERFACE OF TUNGSTEN COATED CARBON BY HIGH HEAT FLUX K. Tokunaga, T. Matsubara, Y. Miyamoto, Y. Takao, N. Yoshida, N. Noda, Y. Kubota, T. Sogabe, T. Kato, and L. Plöechl

17.20 MATERIALS EROSION UNDER SIMULATED PLASMA DISRUPTION HEAT LOADS V.N. Litunovsky, V.E. Kuznetsov, I.B. Ovchinnikov, V.A. Titov, and A. Hassanein

17.21 EROSION OF METALLIC TARGETS IN PULSED HIGH HEAT LOAD EXPERIMENTS AND ITS RELEVANCE FOR ITER H. Würz, B. Bazylev, S. Pestchanyi, F. Kappler, I. Landman, and V. Safronov

17.22 APPLICATION OF TUNGSTEN FOR PLASMA LIMITERS IN TEXTOR T. Tanabe, V. Philipps, M. Wada, T. Ohgo, K. Ohya, J. von Seggern, M. Rubel, A. Huber, A. Pospieszczyk, B. Schweer, and the TEXTOR team

17.23 LOW TEMPERATURE DUCTILITY OF FINE GRAINED TUNGSTEN ALLOYS DISPERSED WITH TRANSITION METAL CARBIDES S. Kannari, Y. Kitsunai, H. Kurishita, M. Hasegawa, Y. Hiraoka, T. Takida, and T. Igarashi

17.24 MICROSTRUCTURAL EVOLUTION IN TUNGSTEN DURING LOW ENERGY HELIUM ION IRRADIATION H. Iwakiri, K. Yasunaga, K. Morishita, H. Watanabe, and N. Yoshida

17.25 TEM STUDY ON DEUTERIUM IRRADIATION-INDUCED DEFECTS IN TUNGSTEN AND MOLYBDENUM T. Matsui, S. Muto, and T. Tanabe

17.26 MICROSTRUCTURAL DEVELOPMENT OF NEUTRON AND ION IRRADIATED W-Re ALLOYS Y. Nemoto, A. Hasegawa, M. Satou, and K. Abe

17.27 EFFECT OF NEUTRON IRRADIATION ON THERMAL DIFFUSIVITY OF W-Re ALLOYS M. Fujitsuka, B. Tsuchiya, I. Mutoh, T. Tanabe, and T. Shikama

17.28 STRENGTHENING OF BERYLLIUM AT THE EARLY STAGE OF LOW TEMPERATURE NEUTRON IRRADIATION G.A. Sernyaev

17.29 EFFECT OF HELIUM AND RADIATION DAMAGE ON MECHANICAL PROPERTIES AND STRUCTURE OF BERYLLIUM A.S. Pokrovsky and S.A. Fabritsiev

17.30 HELIUM EFFECTS ON MECHANICAL PROPERTIES OF BERYLLIUM W. Kesternich

17.31 BERYLLIUM SWELLING AND MICROSTRUCTURAL DAMAGE UNDER NEUTRON IRRADIATION TO 1.6X1023 n/cm2 AT 330-340°C V.P. Chakin, V.A. Tsykanov, A.A. Teykovtsev, G.I. Gadjiev, Z.E. Ostrovsky, and V.A. Kazakov

17.32 INFLUENCE OF ISOTHERMAL AND CYCLIC ANNEALING ON STRUCTURE AND SWELLING OF NEUTRON IRRADIATED BERYLLIUM D.V. Andreev, V.N. Bespalov, A.Yu. Biryukov, and E.A. Krasikov

17.33 SPECIAL FEATURES OF HELIUM PORE FORMATION ON THE EXTERNAL SURFACE OF NEUTRON-IRRADIATED BERYLLIUM SAMPLES Yu.V. Shumov, A.G. Bespalov, and V.A. Pechenkin

17.34 DUCTILITY CORRELATIONS BETWEEN SHEAR PUNCH AND UNIAXIAL TENSILE TEST DATA M.B. Toloczko, M.L. Hamilton, and G.E. Lucas

17.35 DISLOCATION MOTION DURING IRRADIATION INDUCED CREEP OF FCC AND BCC POLYCRYSTALS M.B. Toloczko, J.P. Hirth, and F.A. Garner

17.36 IRRADIATION CREEP INDUCED STRESS RELAXATION OF INCONEL 718 AND 20% COLD-WORKED TYPE 316L STAINLESS STEEL R. Matera and R. Scholz

17.37 SHEAR PUNCH AND TENSILE MEASUREMENTS OF MECHANICAL PROPERTY CHANGES INDUCED IN VARIOUS STEELS BY HIGH ENERGY MIXED PROTON AND NEUTRON IRRADIATION AT LOW TEMPERATURES M.L. Hamilton, F.A. Garner, M.B. Toloczko, S.A. Maloy, W.F. Sommer, M.R. James, P.D. Ferguson, and M.R. Louthan, Jr.

17.38 MICROSTRUCTURAL EVOLUTION OF INCONEL 718 AT HIGH HELIUM AND HYDROGEN GENERATION RATES DURING IRRADIATION WITH HIGH ENERGY PROTONS AND SPALLATION NEUTRONS B.H. Sencer, G.M. Bond, F.A. Garner, M.L. Hamilton, B.M. Oliver, S.A. Maloy, W.F. Sommer, M.R. James, and P.D. Ferguson

17.39 RELEVANT ASPECTS OF SPALLATION RADIATION EFFECTS FOR FUSION REACTOR MATERIALS L.K. Mansur, K. Farrell, J.D. Hunn, E.H. Lee, and M.S. Wechsler

17.40 THE CONTRIBUTION OF VARIOUS DEFECTS TO IRRADIATION-INDUCED HARDENING IN AUSTENITIC MODEL ALLOY M. Ando, Y. Katoh, H. Tanigawa, and A. Kohyama

17.41 ON THE RELATIONSHIP BETWEEN UNIAXIAL YIELD AND SHEAR STRENGTH: THE SCHMID/TAYLOR FACTORS AND VON MISES/TRESCA YIELD CRITERIA R.E. Stoller and S.J. Zinkle

17.42 TENSILE AND LOW CYCLE FATIGUE PROPERTIES OF SOLUTION ANNEALED AND TIG WELD AISI 316L STAINLESS STEEL IRRADIATED AT LOW TEMPERATURE (45°C) J-L. Puzzolante, M. Scibetta, R. Chaouadi, and W. Vandermeulen

17.43 TENSILE PROPERTIES AND DAMAGE MICROSTRUCTURES IN ORR/HFIR-IRRADIATED AUSTENITIC STAINLESS STEELS E. Wakai, S. Jitsukawa, N. Hashimoto, J. P. Robertson, and A. Hishinuma

17.44 MICROSTRUCTURAL CHANGES INDUCED BY POST-IRRADIATION ANNEALING OF NEUTRON-IRRADIATED AUSTENITIC STAINLESS STEELS J.I. Cole and T.R. Allen

17.45 THE EFFECT OF HELIUM TO DPA RATIO ON FATIGUE BEHAVIOR OF AUSTENITIC STAINLESS STEEL IRRADIATED TO 2 DPA I. Ioka, M. Yonekawa, Y. Miwa, and H. Tsuji

17.46 THE EFFECTS OF THE MICROSTRUCTURE AND RADIATION HARDENING ON IRRADIATION ASSISTED STRESS CORROSION CRACKING C. Bailat, R. Schäublin, and M. Victoria

17.47 IRRADIATION BEHAVIOR OF THE TYPE 316 L STAINLESS STEELS V.K. Shamardin, G. Kalinin, and B.S. Rodchenkov

17.49 INVESTIGATION OF HEAT TREATMENT AND TECHNOLOGIES EFFECT ON 316LN-IG STEEL STRUCTURE AND PROPERTIES A.B. Korostelev, V.Ya. Abramov, and A.V. Sidorenkov

17.51 BOUNDARY ZONES DEPLETED BY RADIATION DEFECTS AND ITS INFLUENCE ON THE MECHANICAL PROPERTIES OF IRRADIATED MATERIALS O.P. Maksimkin

17.52 RADIATION EFFECTS ON THE MECHANICAL PROPERTIES OF MOLYBDENUM ALLOYS M. Scibetta, R. Chaouadi, and J.L. Puzzolante

17.53 FATIGUE PROPERTIES OF THE F82H FERRITIC MARTENSITIC STEEL UNDER PROTON IRRADIATION P. Marmy

17.54 THERMAL FATIGUE AND FAILURE OF NEUTRON IRRADIATED FERRITIC-MARTENSITIC STEELS L.A. Belyaeva, A.A. Zisman, C. Petersen, V.A. Potapova, and V.V. Rybin

17.55 EFFECT OF HEAT TREATMENT AND IRRADIATION TEMPERATURE ON MECHANICAL PROPERTIES AND STRUCTURE OF REDUCED-ACTIVATION Cr-W-V STEELS OF BAINITIC, MARTENSITIC, AND MARTENSITIC-FERRITIC CLASSES I.V. Gorynin, V.V. Rybin, A.N. Lapin, I.P. Kursevich, and E.Yu. Klepicov

17.56 EFFECTS OF HELIUM IMPLANTATION ON HARDNESS OF PURE IRON AND A REDUCED ACTIVATION FERRITIC-MARTENSITIC STEEL H. Tanigawa, S. Jitsukawa, A. Hishinuma, M. Ando, Y. Katoh, A. Kohyama, and T. Iwai

17.57 EFFECTS OF IRRADIATION CREEP ON MICROSTRUCTURAL EVOLUTION IN REDUCED ACTIVATION FERRITIC STEELS T. Shibayama, H. Takahashi, Y. Kohno, A. Kohyama, and D.S. Gelles

17.58 DAMAGE STRUCTURE OF ISOTOPICALLY TAILORED HT-9 STEELS IRRADIATED AT 400°C IN HFIR N. Hashimoto, J.P. Robertson, A.F. Rowcliffe, and Y. Miwa

17.59 MICROSTRUCTURAL CHANGES IN F82H IRRADIATED AT 673 K UP TO 51 DPA IN HFIR Y. Miwa, E. Wakai, K. Shiba, N. Hashimoto, J.P. Robertson, A.F. Rowcliffe, and A. Hishinuma

17.60 DEFECT CLUSTER FORMATION AND MECHANICAL PROPERTIES OF METALS CONTAINING HIGH CONCENTRATION OF HELIUM A.I. Ryazanov, H. Trinkaus, and H. Ullmaier

17.61 CHARACTERIZATION OF MICROSTRUCTURAL EFFECTS ON THE DUCTILE TO BRITTLE TRANSITION OF 9-12CrMoVNb AND 7-9CrWVTa STEELS D. Preininger

17.62 TRANSITION REGIME FRACTURE TOUGHNESS-TEMPERATURE PROPERTIES AND CONSTITUTIVE BEHAVIOR OF TWO ADVANCED FERRITIC-MARTENSITIC STEELS P. Spätig, G.R. Odette, E. Donahue, and G.E. Lucas

17.63 CONFOCAL MICROSCOPY-FRACTURE RECONSTRUCTION, FINITE ELEMENT MODELING CHARACTERIZATION OF LOCAL CLEAVAGE TOUGHNESS IN AN ADVANCED MARTENSITIC STEEL FROM SUBSIZED CHARPY V-NOTCH IMPACT TESTS T. Yamamoto, G.R. Odette, G.E. Lucas, and H. Matsui

17.64 LOW TEMPERATURE IRRADIATION EFFECTS ON TENSILE AND CHARPY PROPERTIES OF LOW ACTIVATION FERRITIC STEELS K. Shiba and A. Hishinuma

17.65 EMBRITTLEMENT OF REDUCED-ACTIVATION FERRITIC/MARTENSITIC STEELS IRRADIATED IN HFIR AT 300 AND 400°C R.L. Klueh, M.A. Sokolov, K. Shiba, and Y. Miwa

17.66 TENSILE PROPERTIES AND MICROSTRUCTURE OF 590 MeV PROTON IRRADIATED PURE Fe AND Fe-Cr ALLOYS M.I. Luppo, C. Bailat, R. Schäublin, and M. Victoria

17.67 DIFFERENCES IN THE MICROSTRUCTURE OF THE F82H FERRITIC/MARTENSITIC STEEL AFTER PROTON AND NEUTRON IRRADIATION R. Schäublin and M. Victoria

17.68 EFFECT OF LOW TEMPERATURE IRRADIATION IN ATR ON THE MECHANICAL PROPERTIES OF TERNARY V-Cr-Ti ALLOYS M.L. Hamilton and M.B. Toloczko

17.69 MECHANICAL BEHAVIOR AND MICROSTRUCTURAL EVOLUTION OF VANADIUM ALLOYS IRRADIATED IN ATR-1A1 K. Fukumoto, H. Matsui, L.J. Nowicki, H. Tsai, and D.L. Smith

17.70 EFFECTS OF IRRADIATION ON TOUGHNESS IN V-4Cr-4Ti-Si, Al, Y T. Shibayama, H. Takahashi, and C. Namba

17.71 V-ALLOY EMBRITTLEMENT BY IRRADIATION IN A COOLING GAS ENVIRONMENT H.D. Röhrig, M. Rieth, B. Dafferner, and E. Materna-Morris

17.72 FEATURES OF RADIATION DAMAGE OF VANADIUM AND ITS ALLOYS AT A TEMPERATURE OF 330-340°C V.A. Kazakov, V.P. Chakin, Z.E. Ostrovsky, and Yu.D. Goncharenko

17.73 MICROSTRUCTURAL EXAMINATION OF V-(3-6%)Cr-(3-5%)Ti IRRADIATED IN THE ATR-A1 EXPERIMENT D.S. Gelles

17.74 DEFECT MICROSTRUCTURE AND DEFORMATION BEHAVIOR OF V-Ti-Cr-Si-Al-Y ALLOY IRRADIATED IN ATR T. Chuto, M. Satou, and K. Abe

17.75 MICROSTRUCTURAL ANALYSIS OF V-4Cr-4Ti ALLOYS IRRADIATED IN THE BOR-60 FUSION-1 EXPERIMENT D.T. Hoelzer, S.J. Zinkle, and A.F. Rowcliffe

17.76 EFFECT OF STRAIN RATE ON THE TENSILE PROPERTIES OF UNIRRADIATED AND IRRADIATED V-Cr-Ti ALLOYS A.F. Rowcliffe, S.J. Zinkle, and D.T. Hoelzer

17.77 IRRADIATION-COUPLING TECHNIQUES USING JMTR AND OTHER FACILITY Y. Matsui, Y. Itahashi, M. Niimi, and T. Hoshiya

17.78 DESIGN AND OPERATION OF AN IRRADIATION EXPERIMENT TO MEASURE, IN-SITU, THE CHANGE IN THERMAL CONDUCTIVITY OF CERAMIC MATERIALS A.L. Qualls and W.S. Eatherly

17.79 IRRADIATION FACILITIES AND CONTROL CAPABILITES AT THE HIGH FLUX ISOTOPE REACTOR K.R. Thoms, K.E. Lenox and A.L. Qualls

17.80 ADVANCED TEST REACTOR IRRADIATION TEST VEHICLE INSTALLATION AND PERFORMANCE A.J. Palmer, B.C. Hong, and F.W. Ingram

17.81 EVALUATION OF A SPALLATION NEUTRON SOURCE FOR FUSION-RELEVANT RADIATION DAMAGE EFFECTS STUDIES W.F. Sommer, P.D. Ferguson, M.R. Louthan, Jr., W.R. Johnson, and F.A. Garner

17.82 HOW TO IMPROVE THE IRRADIATION CONDITIONS FOR THE INTERNATIONAL FUSION MATERIALS IRRADIATION FACILITY E. Daum and A. Möslang

17.83 LASER-DRIVEN MICRO NEUTRON SOURCES FOR FUSION MATERIALS TESTING AT HIGH FLUX AND FLUENCE L.J. Perkins, B.G. Logan, M.D. Rosen, M.D. Perry, T. Diaz de la Rubia, N.M. Ghoniem, T. Ditmire, P.T. Springer, and S.C. Wilks

17.84 PLASMA BASED VOLUMETRIC NEUTRON SOURCE FOR MATERIALS TESTING E.T. Cheng and the ST-VNS Study Team

17.85 DuET; A NEW DUAL-BEAM ACCELERATOR FACILITY AT KYOTO UNIVERSITY AND ITS PROSPECTIVE APPLICATIONS TO FUSION MATERIALS RESEARCH Y. Katoh, A. Kohyama, K. Jimbo, M. Ando, and A. Kimura

17.86 ACCELERATORS OF SSC RF-IPPE FOR IN-SITU IRRADIATION TESTING OF MECHANICAL AND OPTICAL PROPERTIES OF MATERIALS V.A. Stepanov, V.M. Chernov, A.I. Glotov, B.K. Kardashev, O.A. Plaksin, V.A. Romanov, and L.P. Zavialsky

17.87 MULTIPLE BEAM HIGH VOLTAGE ELECTRON MICROSCOPE AT HOKKAIDO UNIVERSITY AND PROSPECTIVE APPLICATION TO FUSION REACTOR MATERIALS STUDY H. Takahashi, T. Shibayama, and H. Kinoshita

17.88 QUADRUPOLE MASS SPECTROMETER SYSTEM FOR THE DETERMINATION OF LOW TO HIGH LEVELS OF HYDROGEN IN IRRADIATED MATERIALS B.M. Oliver, F.A. Garner, and L.R. Greenwood

17.89 NEUTRON IRRADIATION HARDENING OF ODS ALLOY TESTED BY MINIATURE DISK BEND TEST METHOD C. Chaoqing, S. Jiguang, and X. Yuanchao

17.90 FURTHER ACHIEVEMENTS OF THE FIMEC TEST FOR CHARACTERISATION OF FUSION MATERIALS R. Montanari, A. Donato, P. Gondi, B. Riccardi, and A. Sili

17.91 SPECIMEN SIZE EFFECTS ON THE TENSILE PROPERTIES OF JPCA AND JFMS Y. Kohno, A. Kohyama, M.L. Hamilton, T. Hirose, Y. Katoh, and F.A. Garner

17.92 EFFECT OF SPECIMEN SIZE ON FATIGUE PROPERTIES IN REDUCED ACTIVATION FERRITIC/MARTENSITIC STEELS T. Hirose, A. Kohyama, Y. Katoh, and H. Tanigawa

17.93 DEVELOPMENT OF SMALL SPECIMEN TEST TECHNIQUE FOR EVALUATION OF IRRADIATION EMBRITTLEMENT OF FUSION MATERIALS M. Ohmi, T. Ishii, J. Saito, T. Hoshiya, N. Ooka, S. Jitsukawa, and M. Eto