-alThe ATLAS area on pdsf has the following structure /auto/atlas/mirror - mirrored libraries In this area there are directories that preserve the CERN ATLAS structure: /auto/atlas/mirror/software (srt mirror). and /auto/atlas/mirror/offline/external (Gaudi, Geant4, tarred and pulled over etc) /auto/atlas/sw/lhcxx - LHC++ software /auto/atlas/sw/lhcb - Gaudi /auto/atlas/sw/lhcb/cvs - Gaudi repository /auto/atlas/local - local cvs repository and libraries built locally Similar to mirror it has subdirectories: /auto/atlas/local/software - for the repository and ATLAS software /auto/atlas/local/offfline/external - for locally built external packages /auto/atlas/tools - setup scripts Setup Scripts ============== I added a script setup-atlas-new.csh to /auto/atlas/tools. It is supposed to be executed after setup-general.csh. Depending on the first argument (either local or mirror) it will setup one of the two environments available currently on PDSF. to set up environment that accesses mirrored libraries: source /auto/atlas/tools/setup-general.csh source /auto/atlas/tools/setup-atlas-new.csh mirror to access locally build libraries: source /auto/atlas/tools/setup-general.csh source /auto/atlas/tools/setup-atlas-new.csh local Mirroring of the ATLAS libraries: ================================= To prepare mirroring of the libraries one needs: /afs/cern.ch/atlas/software/bin/srt mirror -i -r `pwd` -d One needs to use the original srt to do the mirroring - mirrored srt won't work for that. There is no need to have any environmental variables to set up for performing the task listed above. The first step will prepare a directory structure (bin,lib,dist) and mirror the srt libraries. To mirror a release, one still has to use the afs version of: /afs/cern.ch/atlas/software/bin/srt, but already local srt libraries could be used. For that one needs to define $SRT_HOME setenv SRT_HOME /auto/atlas/mirror/software/lib/srt/0.3.2 (0.3.2) is the current version of srt in use. Then a release is mirrored: /afs/cern.ch/atlas/software/bin/srt mirror -c -r `pwd` releaseNumber architecture in our case to mirror 1.1.4 for linux we do: /afs/cern.ch/atlas/software/bin/srt mirror -c -r `pwd` 1.1.4 i586-pc-linux-gnu/egcs-1.1 currently we have the following releases mirrored: 0.0.41 1.1.1 1.1.2 1.1.3 1.1.4 414 MB 1.1.5 439 MB 1.1.6 We need to establish a policy on how to drop releases. Local copy of LHC++ =================== We currently have version 2.0.1 and 3.2.0 (388Mbytes) available under /auto/atlas/sw/lhcxx. Installation is straightforward if you follow instructions: http://wwwinfo.cern.ch/asd/lhc++/installation.html Laurent VACAVANT from EP/HC and Iwona Sakrejda From NERSC (ISakrejda@lbl.gov) registered for lbl to use nag_c and the objectivity. Following a web page: http://wwwinfo.cern.ch/asd/lhc++/installation.html I performed instalation from: /afs/cern.ch/sw/lhcxx/export and our local copy is at: /auto/atlas/sw/lhcxx But the version I installed has no includes. Here is a message I got from CERN library support: ******* We are not allowed to redristribute the NAG C library include files outside Cern. That's because use of header files requires a NAG C developer license: Cern has a site license but we can't assume external sites as one as well. Our group is currently negotiating with NAG to provide such licenses to external institutes, but this will taks some time. Best regards Lysiane Besson/Program Library ******* So for now I just added includes by hand to /auto/atlas/sw/lhcxx/specific/redhat61/Nag_C/5.0/includes Mirroring of the ATLAS cvs repository and Gaudi cvs repository: =============================================================== Mirroring of both the ATLAS and Gaudi cvs repositories with the CVSup/d software has been set up. The server runs at cern on atlas006.cern.ch. Relevant software exists in ~sakrejda/public/cvsup.16.1 A cron job was set up to monitor the server and restart it if the server is killed for some reason (computer reboot etc). A script for the cron job is at: ~sakrejda/public/cvsup.16.1/watch.sh A local version of the Atlas repository resides at: /auto/atlas/local/software/cvs It needs 351MB. There is a file: /auto/atlas/local/software/cvs/CVSROOT/avail It contains 1 line: unavail This way the repository is read-only. A local version of Gaudi repository resides at: /auto/atlas/sw/lhcb/cvs It needs 120MB. There is a file: /auto/atlas/sw/lhcb/cvs/CVSROOT/avail It contains 1 line: unavail This way the repository is read-only. Currently bo repositories are updated every 4 hours by a cron job running on pdsflx003 pdsflx003 66% crontab -l # DO NOT EDIT THIS FILE - edit the master and reinstall. # (/tmp/crontab.17005 installed on Thu Nov 9 13:32:44 2000) # (Cron version -- $Id: crontab.c,v 2.13 1994/01/17 03:20:37 vixie Exp $) SHELL=/bin/csh 20 0-23/4 * * * /auto/atlas/local/acvsup 50 0-23/4 * * * /auto/atlas/sw/lhcb/acvsup Log of the cron job goes to: /auto/atlas/local/cvsuplog for the ATLAS repository and /auto/atlas/sw/lhcb/cvsuplog for Gaudi. Building ATLAS release based on a local repository: =================================================== I mirrored srt to have it in the /auto/atlas/local/software area. I should have retrieved the source and build it instead of mirroring, but could not find instructions. I will correct that later. reminder, to mirror srt: /afs/cern.ch/atlas/software/bin/srt mirror -i -r `pwd` d I had to correct for the location of /usr/bin/install The problem is in: /auto/atlas/mirror/software/lib/srt/0.3.2/fragments/i586-pc-linux/egcs-1.0/machine Then Maja adviced to use: srt [srt options] mirror -n -r ROOT DIST to get a tagged version of the source code from the repository. I pointed it at PDSF cvs mirror site: setenv CVSROOT /auto/atlas/local/software/cvs I created: /auto/atlas/local/software/dist then in: /auto/atlas/local/software I ran: /afs/cern.ch/atlas/software/bin/srt mirror -n -r `pwd` 1.1.5 If you "fixed" your mirror, so it does not know it's a mirror you need to go to /auto/atlas/local/software/dist and: /auto/atlas/local/software/bin/srt new -p 1.2.1 offline-01-02-01 I set environmental variables: setenv SRT_HOME /auto/atlas/local/software/lib/srt/0.3.2 setenv SRT_ARCH i586-pc-linux-gnu setenv SRT_CONF egcs-1.1 setenv SRT_TARGET i586-pc-linux-gnu/egcs-1.1 setenv SRT_SITE /auto/atlas/local/software/srt-local-config and appended /auto/atlas/local/software/bin to the PATH Then in : /auto/atlas/local/software/ srt setup cd dist/1.1.5 I edited boot.mk replacing list of hosts by my local host. Then following Maya's instructions I ran: make -f boot.mk release make -f boot.mk release-post-clean then cd /auto/atlas/local/software/ and froze the release: /afs/cern.ch/atlas/software/bin/srt mirror -f -r `pwd` 1.1.5 or with the "fixed" version of srt cd /auto/atlas/local/software/dist/1.1.5 and run srt freeze I had to use the cern srt as the local knows it's a mirror and won't do freezing. If I create srt locally, this problem should be gone. I got a message: build finished on pdsflx02 without errors at Fri Sep 1 10:39:57 PDT 2000 Now we have the following releases build locally: 1.1.3 1.1.5 1.1.6 1.2.0 1.2.1 Mirroring of the Gaudi repository: ================================== Mirroring of the Gaudi cvs repository with the CVSup/d software has been set up. A local version of the repository resides at: /auto/atlas/sw/lhcb/cvs It requires 97MB of disk space.Currently it is updated every 3 hours by a cron job running on pdsflx02. Log of the cron job goes into: /auto/atlas/sw/lhcb/cvsuplog Installing Gaudi from CERN: =========================== pdsflx02 74% cp /afs/cern.ch/atlas/offline/external/GaudiRoot/Gaudi.tar.gz . pdsflx02 75% cp /afs/cern.ch/atlas/offline/external/GaudiRoot/packages.tar.gz . pdsflx02 76% cp /afs/cern.ch/atlas/offline/external/GaudiRoot/tools.tar.gz . unzip and untar Installing local version of CMT ================================ Web page for distributions (v1r7): http://www.lal.in2p3.fr/SI/CMT/v1r7/CMTDownload.html Then select both http://www.lal.in2p3.fr/SI/CMT/v1r7/CMTv1r7i386_linux22.tar.Z and http://www.lal.in2p3.fr/SI/CMT/v1r7/CMTv1r7.tar.Z For ATLAS at PDSF CMT was installed at: /auto/atlas/sw/contrib/CMT Save it and untar (tar -xvZf) then go to CMT/v1r7/mgr and install: ./INSTALL gamke And it's ready for use.... Building local Gaudi(v6r1): ========================= Untar (tar -xvzf) in /auto/atlas/local/offline/external/Gaudi a release that D. Quarrie posted at CERN in the ATLAS afs area: /afs/cern.ch/atlas/project/Gaudi/install/0.6.1.tar.gz Make sure you have CMT v1r7 Set the following environmental variables (I am not sure we need them all, will experiment later): setenv CERN /usr/local/cern setenv CERN_LEVEL 2000 setenv CMTBASE /auto/atlas/sw/contrib/CMT setenv CMTVERS v1r7 setenv CMTCONFIG i386_linux22 source $CMTBASE/$CMTVERS/mgr/setup.csh setenv PATH `/auto/atlas/tools/addpath.pl PATH ${CMTBASE}/mgr` setenv CMTPATH /auto/atlas/local/offline/external/Gaudi/0.6.1 setenv CMTSITE LBNL setenv LHCBCERNINC ${CERN}/${CERN_LEVEL}/include/ setenv SITEROOT /auto/atlas/ setenv ROOTSYS /auto/atlas/sw/ROOT/v2.25 setenv LD_LIBRARY_PATH /auto/atlas/sw/ROOT/v2.25/i386_linux22/root/lib add $CERN/${CERN_LEVEL}/bin to your path if it is not there. setenv PATH ${PATH}:${CERN}/${CERN_LEVEL}/bin Xerces had to be installed in $EXT_DIR (tar -xvzf ~quarrie/Atlas/xerces-c.tar.gz) This is the same place xerces is installed at CERN in EXTLIB/v2r2/mgr requirements were modified to include at the end of EXT_DIR: LBNL "/auto/atlas/local/offline/external/" at the end of ROOT_DIR: LBNL "/auto/atlas/sw/ROOT/" Since for now I have problems with Python, I exclude it from the built. Then do the following: cd Athena/v1r8/cmt cmt broadcast -exclude="Python" rm -f '*.make' cmt broadcast -exclude="Python" cmt config cmt broadcast -exclude="Python" make clean cmt broadcast -exclude="Python" make -k AND IT WAS MADE!!!!!!!! Additional packages from offline/external ========================================= The following packages were tarred and installed in /auto/atlas/mirror/offline/external tar -cvzf ~/public/pythia_6.129.tar.z --exclude pythia_6.129/installed/sparc-sun-solaris2.5.1 pythia_6.129 tar -cvzf ~/public/isajet_7.51.tar.z -X ~/exclude.txt isajet_7.51 tar -cvzf ~/public/4.09.tar.z --exclude 4.09/installed/sparc-sun-solaris2.5.1 4.09 Building Athena at based on /auto/atlas/mirror and my local cvs ================================================================ On pdsf system install is in: /usr/bin/install so I had to edit: /auto/atlas/mirror/software/lib/srt/0.3.2/fragments/i586-pc-linux/egcs-1.0/machine I replaced: # Installation INSTALL = /usr/local/bin/gnu/install -c with: # Installation INSTALL = /usr/bin/install -c Then I followed Dave's instructions: srt new src 1.1.3 cd src cvs co -d ZebraTDRCnv -r MayTutorial_01_01_00 offline/Event/ZebraTDRCnv cvs co -d GaudiSequencer -r Gaudi5-00-00-00 offline/Control/GaudiSequencer cvs co -d GaudiInterface -r Gaudi5-00-00-00 offline/External/GaudiInterface cvs co -d ControlExamples -r Gaudi5-00-00-00 offline/Control/ControlExamples cd .. mkdir build mkdir run cd build ../src/configure make clean make install results from these 3 commands are in: /auto/atlas/sakrejda/mathena/build clean.doc configure.doc install.doc The third one contains references to the /afs area although I have my local Gaudi - needs to be chcked. also the following variables are being defined: ATLAS_EXTERNAL=/afs/cern.ch/atlas/offline/external LHCXX_ARCH=redhat61 CMTCONFIG=i386_linux22 GAUDIROOT=/afs/cern.ch/atlas/offline/external/GaudiRoot need to find out where and modify to reflect local configuration But otherwise procedure seemed to be succesful. To run: cd ../run cp ../src/ControlExamples/GaudiExamplesCommon/share/* . source setup.csh But then I don't know what I am supposed to run....