RUN_TRIG_LUM Utility

The RUN_TRIG_LUM utility returns the trigger luminosities for a set of triggers for a given run list which are specified by the user. If a '*' appears after a luminosity that means the luminosity server number was not available and the minbias luminosity was used as a substitute. This means that NO VETO conditions or dead times or any other corrections were taken into account when calculating this number as they are not available.

RUN_TRIG_LUM Example

$ RUN_TRIG_LUM
Enter input filename (max 80 characters): RUN.LIST
Enter output filename (max 80 characters): RUN.TLUM
Enter trigger name or filename: MISSING_ET
Enter trigger name or press RETURN: SCALAR_ET
Enter trigger name or press RETURN:
Output will be written to RUN.TLUM

$ TYPE RUN.TLUM 

RUN NUM.  MISSING_ET   SCALAR_ET
========  ==========  ==========
  60369   8.0872E-01  4.2451E-01
  60370   9.0521E-02  4.8591E-02
  60371   0.0000E+00* 0.0000E+00*
  60372   1.3512E+01  7.5654E+00
  60373   1.1367E+01  6.9214E+00
  60374   0.0000E+00* 0.0000E+00*
  60375   0.0000E+00* 0.0000E+00*
  60376   1.0373E+01  6.6114E+00
  60377   2.8451E+00  1.8660E+00
  60379   0.0000E+00* 0.0000E+00*
  60380   0.0000E+00* 0.0000E+00*
========  ==========  ==========
TOT LUM.  3.8996E+01  2.3437E+01
PDB Home Page
send comments or suggestions to Laura Paterno
Last modified: Wed Feb 5 10:39:25 CST