! Started logfile: J1222+0413_X_2006_02_16_yyk_uvs.log on Wed Jul 5 12:12:51 2006 obs J1222+0413_X_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J1222+0413_X_2006_02_16_yyk_uva.fits ! AN table 1: 139 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.943086 visibilities/baseline/integration-bin. ! Found source: J1222+0413 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2421 lines of history. ! ! Reading 23596 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1222+0413_X_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.603654 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7079 mas, bmaj=1.829 mas, bpa=-1.812 degrees ! Estimated noise=2.02513 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.507219 Jy ! Component: 100 - total flux cleaned = 0.579128 Jy ! Total flux subtracted in 100 components = 0.579128 Jy ! Clean residual min=-0.017206 max=0.017479 Jy/beam ! Clean residual mean=-0.000058 rms=0.004396 Jy/beam ! Combined flux in latest and established models = 0.579129 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.579129 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.097310Jy sigma=1.427409 ! Fit after self-cal, rms=0.097226Jy sigma=1.421227 ! Inverting map and beam ! Estimated beam: bmin=0.7079 mas, bmaj=1.829 mas, bpa=-1.812 degrees ! Estimated noise=2.02513 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8627 mas, bmaj=2.145 mas, bpa=-1.617 degrees ! Estimated noise=1.62129 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0298867 Jy ! Component: 100 - total flux cleaned = 0.0429952 Jy ! Component: 150 - total flux cleaned = 0.0494796 Jy ! Component: 200 - total flux cleaned = 0.0522674 Jy ! Total flux subtracted in 200 components = 0.0522674 Jy ! Clean residual min=-0.017564 max=0.011703 Jy/beam ! Clean residual mean=-0.000065 rms=0.003301 Jy/beam ! Combined flux in latest and established models = 0.631396 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 45 model components to the UV plane model. ! The established model now contains 53 components and 0.631396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089115Jy sigma=1.274250 ! Fit after self-cal, rms=0.089135Jy sigma=1.273892 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8627 x 2.145 at -1.617 degrees (North through East) ! Clean map min=-0.016312 max=0.58683 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.98825 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 1.06 KP 0.98 ! LA 1.03 MK 1.03 NL 1.01 OV 1.00 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01008 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.04 HN 1.04 KP 0.91 ! LA 0.95 MK 0.97 NL 1.00 OV 0.96 ! PT 1.04 SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.01386 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 HN 0.93 KP 0.85 ! LA 0.97 MK 1.03 NL 0.97 OV 0.99 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.987407 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.04 HN 0.98 KP 0.88 ! LA 0.97 MK 1.08 NL 0.98 OV 1.04 ! PT 1.12 SC 1.00 ! ! ! Fit before self-cal, rms=0.089135Jy sigma=1.273892 ! Fit after self-cal, rms=0.076011Jy sigma=1.052868 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076011Jy sigma=1.052868 ! Fit after self-cal, rms=0.076022Jy sigma=1.052817 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8713 mas, bmaj=2.157 mas, bpa=-1.421 degrees ! Estimated noise=1.62097 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000532602 Jy ! Component: 100 - total flux cleaned = -0.00067281 Jy ! Component: 150 - total flux cleaned = -0.000707845 Jy ! Component: 200 - total flux cleaned = -0.000649057 Jy ! Total flux subtracted in 200 components = -0.000649057 Jy ! Clean residual min=-0.005546 max=0.006561 Jy/beam ! Clean residual mean=-0.000005 rms=0.001506 Jy/beam ! Combined flux in latest and established models = 0.630747 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 60 components and 0.630747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075919Jy sigma=1.051878 ! Fit after self-cal, rms=0.075937Jy sigma=1.051714 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075937Jy sigma=1.051714 ! Fit after self-cal, rms=0.073543Jy sigma=1.005072 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00049076 Jy ! Component: 100 - total flux cleaned = 0.000454602 Jy ! Component: 150 - total flux cleaned = 0.000454064 Jy ! Component: 200 - total flux cleaned = 0.000430833 Jy ! Total flux subtracted in 200 components = 0.000430833 Jy ! Clean residual min=-0.005459 max=0.006607 Jy/beam ! Clean residual mean=-0.000005 rms=0.001501 Jy/beam ! Combined flux in latest and established models = 0.631178 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 66 components and 0.631178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073491Jy sigma=1.004539 ! Fit after self-cal, rms=0.073165Jy sigma=0.999832 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8713 x 2.157 at -1.421 degrees (North through East) ! Clean map min=-0.0052118 max=0.58733 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073165Jy sigma=0.999832 ! Fit after self-cal, rms=0.071599Jy sigma=0.964262 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071599Jy sigma=0.964262 ! Fit after self-cal, rms=0.071527Jy sigma=0.963377 ! Inverting map and beam ! Estimated beam: bmin=0.8722 mas, bmaj=2.158 mas, bpa=-1.398 degrees ! Estimated noise=1.6204 mJy/beam. ! Added new window around map position (25, 15). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00692945 Jy ! Component: 100 - total flux cleaned = 0.00998622 Jy ! Component: 150 - total flux cleaned = 0.0112853 Jy ! Component: 200 - total flux cleaned = 0.011878 Jy ! Total flux subtracted in 200 components = 0.011878 Jy ! Clean residual min=-0.004701 max=0.004228 Jy/beam ! Clean residual mean=-0.000003 rms=0.001261 Jy/beam ! Combined flux in latest and established models = 0.643056 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 82 components and 0.643056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070995Jy sigma=0.951204 ! Fit after self-cal, rms=0.070945Jy sigma=0.950610 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070945Jy sigma=0.950610 ! Fit after self-cal, rms=0.069557Jy sigma=0.935208 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069557Jy sigma=0.935208 ! Fit after self-cal, rms=0.069545Jy sigma=0.935006 ! Inverting map and beam ! Estimated beam: bmin=0.8733 mas, bmaj=2.161 mas, bpa=-1.387 degrees ! Estimated noise=1.62073 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000799142 Jy ! Component: 100 - total flux cleaned = 0.00118685 Jy ! Component: 150 - total flux cleaned = 0.00147991 Jy ! Component: 200 - total flux cleaned = 0.00174522 Jy ! Total flux subtracted in 200 components = 0.00174522 Jy ! Clean residual min=-0.004843 max=0.004470 Jy/beam ! Clean residual mean=-0.000002 rms=0.001230 Jy/beam ! Combined flux in latest and established models = 0.644801 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 88 components and 0.644801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069450Jy sigma=0.933694 ! Fit after self-cal, rms=0.069449Jy sigma=0.933547 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.18 mas, bmaj=3.412 mas, bpa=-4.304 degrees ! Estimated noise=2.10684 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121839 Jy ! Component: 100 - total flux cleaned = 0.00153268 Jy ! Component: 150 - total flux cleaned = 0.00164903 Jy ! Component: 200 - total flux cleaned = 0.00175633 Jy ! Total flux subtracted in 200 components = 0.00175633 Jy ! Clean residual min=-0.005344 max=0.004501 Jy/beam ! Clean residual mean=-0.000002 rms=0.001357 Jy/beam ! Combined flux in latest and established models = 0.646557 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 99 components and 0.646557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069433Jy sigma=0.933674 ! Fit after self-cal, rms=0.069424Jy sigma=0.933511 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7122 mas, bmaj=1.835 mas, bpa=-1.728 degrees ! Estimated noise=2.03029 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.50879 Jy ! Component: 100 - total flux cleaned = 0.580076 Jy ! Component: 150 - total flux cleaned = 0.601857 Jy ! Component: 200 - total flux cleaned = 0.612142 Jy ! Total flux subtracted in 200 components = 0.612142 Jy ! Clean residual min=-0.007423 max=0.006612 Jy/beam ! Clean residual mean=-0.000008 rms=0.001859 Jy/beam ! Combined flux in latest and established models = 0.612142 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.612142 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8733 mas, bmaj=2.161 mas, bpa=-1.387 degrees ! Estimated noise=1.62073 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100094 Jy ! Component: 100 - total flux cleaned = 0.0161297 Jy ! Component: 150 - total flux cleaned = 0.0205533 Jy ! Component: 200 - total flux cleaned = 0.0239373 Jy ! Total flux subtracted in 200 components = 0.0239373 Jy ! Clean residual min=-0.004680 max=0.004248 Jy/beam ! Clean residual mean=-0.000004 rms=0.001312 Jy/beam ! Combined flux in latest and established models = 0.636079 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 52 components and 0.636079 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.18 mas, bmaj=3.412 mas, bpa=-4.304 degrees ! Estimated noise=2.10684 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00403008 Jy ! Component: 100 - total flux cleaned = 0.00646232 Jy ! Component: 150 - total flux cleaned = 0.00765475 Jy ! Component: 200 - total flux cleaned = 0.00832067 Jy ! Total flux subtracted in 200 components = 0.00832067 Jy ! Clean residual min=-0.005100 max=0.004317 Jy/beam ! Clean residual mean=-0.000003 rms=0.001370 Jy/beam ! Combined flux in latest and established models = 0.6444 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 67 components and 0.6444 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8733 mas, bmaj=2.161 mas, bpa=-1.387 degrees ! Estimated noise=1.62073 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 8.33699e-05 Jy ! Component: 100 - total flux cleaned = 0.000154471 Jy ! Component: 150 - total flux cleaned = 0.00021746 Jy ! Component: 200 - total flux cleaned = 0.00027252 Jy ! Total flux subtracted in 200 components = 0.00027252 Jy ! Clean residual min=-0.004583 max=0.004457 Jy/beam ! Clean residual mean=-0.000002 rms=0.001225 Jy/beam ! Combined flux in latest and established models = 0.644672 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 74 components and 0.644673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069498Jy sigma=0.934293 ! Fit after self-cal, rms=0.069495Jy sigma=0.934127 wmodel J1222+0413_X_2006_02_16_yyk\_map.mod ! Writing 74 model components to file: J1222+0413_X_2006_02_16_yyk_map.mod wobs J1222+0413_X_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J1222+0413_X_2006_02_16_yyk_uvs.fits wwins J1222+0413_X_2006_02_16_yyk\_map.win ! wwins: Wrote 2 windows to J1222+0413_X_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000990588 Jy ! Component: 100 - total flux cleaned = -0.0017425 Jy ! Component: 150 - total flux cleaned = -0.00209465 Jy ! Component: 200 - total flux cleaned = -0.00222961 Jy ! Component: 250 - total flux cleaned = -0.00242398 Jy ! Component: 300 - total flux cleaned = -0.00279659 Jy ! Component: 350 - total flux cleaned = -0.00297646 Jy ! Component: 400 - total flux cleaned = -0.00344483 Jy ! Component: 450 - total flux cleaned = -0.00384129 Jy ! Component: 500 - total flux cleaned = -0.0040069 Jy ! Component: 550 - total flux cleaned = -0.00438388 Jy ! Component: 600 - total flux cleaned = -0.00464567 Jy ! Component: 650 - total flux cleaned = -0.00479947 Jy ! Component: 700 - total flux cleaned = -0.00479996 Jy ! Component: 750 - total flux cleaned = -0.00494761 Jy ! Component: 800 - total flux cleaned = -0.00499508 Jy ! Component: 850 - total flux cleaned = -0.00494707 Jy ! Component: 900 - total flux cleaned = -0.00499304 Jy ! Component: 950 - total flux cleaned = -0.00499325 Jy ! Component: 1000 - total flux cleaned = -0.00503815 Jy ! Component: 1050 - total flux cleaned = -0.00495079 Jy ! Component: 1100 - total flux cleaned = -0.00499396 Jy ! Component: 1150 - total flux cleaned = -0.00482602 Jy ! Component: 1200 - total flux cleaned = -0.00474332 Jy ! Component: 1250 - total flux cleaned = -0.00482481 Jy ! Component: 1300 - total flux cleaned = -0.00470371 Jy ! Component: 1350 - total flux cleaned = -0.00458454 Jy ! Component: 1400 - total flux cleaned = -0.00458426 Jy ! Component: 1450 - total flux cleaned = -0.00454497 Jy ! Component: 1500 - total flux cleaned = -0.00431652 Jy ! Component: 1550 - total flux cleaned = -0.00439138 Jy ! Component: 1600 - total flux cleaned = -0.00431687 Jy ! Component: 1650 - total flux cleaned = -0.00420716 Jy ! Component: 1700 - total flux cleaned = -0.00402662 Jy ! Component: 1750 - total flux cleaned = -0.00399099 Jy ! Component: 1800 - total flux cleaned = -0.00395549 Jy ! Component: 1850 - total flux cleaned = -0.00388531 Jy ! Component: 1900 - total flux cleaned = -0.00385073 Jy ! Component: 1950 - total flux cleaned = -0.00385061 Jy ! Component: 2000 - total flux cleaned = -0.00378346 Jy ! Total flux subtracted in 2048 components = -0.00385055 Jy ! Clean residual min=-0.002778 max=0.002063 Jy/beam ! Clean residual mean=-0.000004 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.640822 Jy keep ! Adding 118 model components to the UV plane model. ! The established model now contains 192 components and 0.640822 Jy ![Exited script file: muppet] wmap "J1222+0413_X_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8733 x 2.161 at -1.387 degrees (North through East) ! Clean map min=-0.0037805 max=0.58952 Jy/beam ! Writing clean map to FITS file: J1222+0413_X_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.589522 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000629481 device "J1222+0413_X_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J1222+0413_X_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.320335 0.320335 0.640669 1.28134 2.56268 5.12535 10.2507 20.5014 41.0028 82.0057 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.589 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8733 x 2.161 at -1.387 degrees (North through East) ! Clean map min=-0.0037805 max=0.58952 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1222+0413_X_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J1222+0413_X_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1222+0413_X_2006_02_16_yyk_uvs.log closed on Wed Jul 5 12:13:34 2006