! Started logfile: J1613+3412_X_2006_02_16_yyk_uvs.log on Wed Jul  5 12:56:45 2006
obs J1613+3412_X_2006_02_16_yyk_uva.fits
! Reading UV FITS file: J1613+3412_X_2006_02_16_yyk_uva.fits
! AN table 1: 144 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.947377 visibilities/baseline/integration-bin.
! Found source: J1613+3412
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2430 lines of history.
! 
! Reading 24556 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1613+3412_X_2006_02_16_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 3.41897 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7083 mas, bmaj=2.146 mas, bpa=17.89 degrees
! Estimated noise=2.16934 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 2.78593 Jy
! Component: 100  -  total flux cleaned = 3.45564 Jy
! Total flux subtracted in 100 components = 3.45564 Jy
! Clean residual min=-0.172210 max=0.296822 Jy/beam
! Clean residual mean=-0.000802 rms=0.045437 Jy/beam
! Combined flux in latest and established models = 3.45564 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 3.45564 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.665882Jy  sigma=10.925750
! Fit after  self-cal, rms=0.653584Jy  sigma=10.720256
! Inverting map 
! Added new window around map position (0.6, -3).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.342718 Jy
! Component: 100  -  total flux cleaned = 0.53076 Jy
! Total flux subtracted in 100 components = 0.53076 Jy
! Clean residual min=-0.137641 max=0.098837 Jy/beam
! Clean residual mean=-0.000547 rms=0.028132 Jy/beam
! Combined flux in latest and established models = 3.9864 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 34 components and 3.9864 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.469115Jy  sigma=7.694028
! Fit after  self-cal, rms=0.461951Jy  sigma=7.511387
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8637 mas, bmaj=2.239 mas, bpa=17.42 degrees
! Estimated noise=1.79553 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.2046 Jy
! Component: 100  -  total flux cleaned = 0.334797 Jy
! Component: 150  -  total flux cleaned = 0.432646 Jy
! Component: 200  -  total flux cleaned = 0.508501 Jy
! Total flux subtracted in 200 components = 0.508501 Jy
! Clean residual min=-0.116836 max=0.085491 Jy/beam
! Clean residual mean=-0.000537 rms=0.023604 Jy/beam
! Combined flux in latest and established models = 4.4949 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 63 model components to the UV plane model.
! The established model now contains 85 components and 4.4949 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.366990Jy  sigma=5.933852
! Fit after  self-cal, rms=0.363282Jy  sigma=5.819194
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8637 x 2.239 at 17.42 degrees (North through East)
! Clean map  min=-0.10076  max=3.187 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.997093
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.06     KP        0.96     
!   LA        0.97     MK        1.01     NL        1.05     OV        1.00     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.01618
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.05     KP        0.90     
!   LA        0.93     MK        0.98     NL        1.03     OV        0.99     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.01104
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.02     HN        0.95     KP        0.84     
!   LA        0.95     MK        1.02     NL        1.01     OV        1.01     
!   PT        1.02     SC        0.98     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.99182
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.05     HN        0.99     KP        0.86     
!   LA        0.94     MK        1.04     NL        1.03     OV        1.04     
!   PT        1.09     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.363282Jy  sigma=5.819194
! Fit after  self-cal, rms=0.247147Jy  sigma=4.049824
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.247147Jy  sigma=4.049824
! Fit after  self-cal, rms=0.247349Jy  sigma=4.048642
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8734 mas, bmaj=2.266 mas, bpa=17.38 degrees
! Estimated noise=1.7936 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.4, -3.4).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0814581 Jy
! Component: 100  -  total flux cleaned = 0.126205 Jy
! Component: 150  -  total flux cleaned = 0.149901 Jy
! Component: 200  -  total flux cleaned = 0.156607 Jy
! Total flux subtracted in 200 components = 0.156607 Jy
! Clean residual min=-0.024729 max=0.034873 Jy/beam
! Clean residual mean=-0.000254 rms=0.007558 Jy/beam
! Combined flux in latest and established models = 4.65151 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 37 model components to the UV plane model.
! The established model now contains 120 components and 4.65151 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.227221Jy  sigma=3.652852
! Fit after  self-cal, rms=0.226002Jy  sigma=3.636127
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.226002Jy  sigma=3.636127
! Fit after  self-cal, rms=0.136469Jy  sigma=2.176379
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.019658 Jy
! Component: 100  -  total flux cleaned = 0.0266496 Jy
! Component: 150  -  total flux cleaned = 0.0292732 Jy
! Component: 200  -  total flux cleaned = 0.0309898 Jy
! Total flux subtracted in 200 components = 0.0309898 Jy
! Clean residual min=-0.020573 max=0.034071 Jy/beam
! Clean residual mean=-0.000232 rms=0.006838 Jy/beam
! Combined flux in latest and established models = 4.6825 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 32 model components to the UV plane model.
! The established model now contains 133 components and 4.6825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.131288Jy  sigma=2.079656
! Fit after  self-cal, rms=0.118140Jy  sigma=1.923054
! Inverting map 
! Added new window around map position (-4.6, -7.4).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0366338 Jy
! Component: 100  -  total flux cleaned = 0.0499828 Jy
! Component: 150  -  total flux cleaned = 0.05662 Jy
! Component: 200  -  total flux cleaned = 0.0618024 Jy
! Total flux subtracted in 200 components = 0.0618024 Jy
! Clean residual min=-0.017927 max=0.017957 Jy/beam
! Clean residual mean=-0.000165 rms=0.005357 Jy/beam
! Combined flux in latest and established models = 4.7443 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 36 model components to the UV plane model.
! The established model now contains 165 components and 4.7443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108248Jy  sigma=1.750484
! Fit after  self-cal, rms=0.106135Jy  sigma=1.730686
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8734 x 2.266 at 17.38 degrees (North through East)
! Clean map  min=-0.016412  max=3.2039 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106135Jy  sigma=1.730686
! Fit after  self-cal, rms=0.079408Jy  sigma=1.269318
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079408Jy  sigma=1.269318
! Fit after  self-cal, rms=0.079199Jy  sigma=1.267647
! Inverting map and beam 
! Estimated beam: bmin=0.875 mas, bmaj=2.271 mas, bpa=17.44 degrees
! Estimated noise=1.78978 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0119657 Jy
! Component: 100  -  total flux cleaned = 0.0148015 Jy
! Component: 150  -  total flux cleaned = 0.0156418 Jy
! Component: 200  -  total flux cleaned = 0.0160059 Jy
! Total flux subtracted in 200 components = 0.0160059 Jy
! Clean residual min=-0.015587 max=0.016619 Jy/beam
! Clean residual mean=-0.000094 rms=0.004214 Jy/beam
! Combined flux in latest and established models = 4.76031 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 186 components and 4.76031 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075381Jy  sigma=1.201763
! Fit after  self-cal, rms=0.075182Jy  sigma=1.199204
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075182Jy  sigma=1.199204
! Fit after  self-cal, rms=0.071970Jy  sigma=1.151497
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071970Jy  sigma=1.151497
! Fit after  self-cal, rms=0.071963Jy  sigma=1.151493
! Inverting map and beam 
! Estimated beam: bmin=0.8755 mas, bmaj=2.272 mas, bpa=17.45 degrees
! Estimated noise=1.78955 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00296732 Jy
! Component: 100  -  total flux cleaned = 0.00132137 Jy
! Component: 150  -  total flux cleaned = 0.000732101 Jy
! Component: 200  -  total flux cleaned = -0.000334199 Jy
! Total flux subtracted in 200 components = -0.000334199 Jy
! Clean residual min=-0.015088 max=0.015944 Jy/beam
! Clean residual mean=-0.000075 rms=0.003882 Jy/beam
! Combined flux in latest and established models = 4.75998 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 37 model components to the UV plane model.
! The established model now contains 200 components and 4.75998 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069999Jy  sigma=1.118359
! Fit after  self-cal, rms=0.069939Jy  sigma=1.117329
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.073 mas, bmaj=2.849 mas, bpa=11.55 degrees
! Estimated noise=2.36102 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 7.88098e-05 Jy
! Component: 100  -  total flux cleaned = -0.00217314 Jy
! Component: 150  -  total flux cleaned = -0.00409743 Jy
! Component: 200  -  total flux cleaned = -0.00560912 Jy
! Total flux subtracted in 200 components = -0.00560912 Jy
! Clean residual min=-0.017290 max=0.020578 Jy/beam
! Clean residual mean=-0.000150 rms=0.005609 Jy/beam
! Combined flux in latest and established models = 4.75437 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 218 components and 4.75436 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069531Jy  sigma=1.111724
! Fit after  self-cal, rms=0.069429Jy  sigma=1.110235
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7135 mas, bmaj=2.156 mas, bpa=17.89 degrees
! Estimated noise=2.16942 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 2.78371 Jy
! Component: 100  -  total flux cleaned = 3.4774 Jy
! Component: 150  -  total flux cleaned = 3.80212 Jy
! Component: 200  -  total flux cleaned = 4.00213 Jy
! Total flux subtracted in 200 components = 4.00213 Jy
! Clean residual min=-0.054442 max=0.086143 Jy/beam
! Clean residual mean=-0.000475 rms=0.020559 Jy/beam
! Combined flux in latest and established models = 4.00213 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 4.00213 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8755 mas, bmaj=2.272 mas, bpa=17.45 degrees
! Estimated noise=1.78955 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-10.4, 20.6).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.191365 Jy
! Component: 100  -  total flux cleaned = 0.317954 Jy
! Component: 150  -  total flux cleaned = 0.407317 Jy
! Component: 200  -  total flux cleaned = 0.47203 Jy
! Total flux subtracted in 200 components = 0.47203 Jy
! Clean residual min=-0.030166 max=0.036562 Jy/beam
! Clean residual mean=-0.000435 rms=0.009682 Jy/beam
! Combined flux in latest and established models = 4.47416 Jy
! Adding 79 model components to the UV plane model.
! The established model now contains 99 components and 4.47416 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.073 mas, bmaj=2.849 mas, bpa=11.55 degrees
! Estimated noise=2.36102 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0903109 Jy
! Component: 100  -  total flux cleaned = 0.142234 Jy
! Component: 150  -  total flux cleaned = 0.179602 Jy
! Component: 200  -  total flux cleaned = 0.207423 Jy
! Total flux subtracted in 200 components = 0.207423 Jy
! Clean residual min=-0.022469 max=0.024791 Jy/beam
! Clean residual mean=-0.000419 rms=0.007838 Jy/beam
! Combined flux in latest and established models = 4.68158 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 148 components and 4.68158 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8755 mas, bmaj=2.272 mas, bpa=17.45 degrees
! Estimated noise=1.78955 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0160706 Jy
! Component: 100  -  total flux cleaned = 0.0274128 Jy
! Component: 150  -  total flux cleaned = 0.0318527 Jy
! Component: 200  -  total flux cleaned = 0.0345769 Jy
! Total flux subtracted in 200 components = 0.0345769 Jy
! Clean residual min=-0.016288 max=0.017834 Jy/beam
! Clean residual mean=-0.000130 rms=0.004549 Jy/beam
! Combined flux in latest and established models = 4.71616 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 177 components and 4.71616 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078305Jy  sigma=1.245905
! Fit after  self-cal, rms=0.077403Jy  sigma=1.229201
wmodel J1613+3412_X_2006_02_16_yyk\_map.mod
! Writing 177 model components to file: J1613+3412_X_2006_02_16_yyk_map.mod
wobs J1613+3412_X_2006_02_16_yyk\_uvs.fits
! Writing UV FITS file: J1613+3412_X_2006_02_16_yyk_uvs.fits
wwins J1613+3412_X_2006_02_16_yyk\_map.win
! wwins: Wrote 5 windows to J1613+3412_X_2006_02_16_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00694137 Jy
! Component: 100  -  total flux cleaned = 0.00778926 Jy
! Component: 150  -  total flux cleaned = 0.00805846 Jy
! Component: 200  -  total flux cleaned = 0.00853411 Jy
! Component: 250  -  total flux cleaned = 0.00897347 Jy
! Component: 300  -  total flux cleaned = 0.00897014 Jy
! Component: 350  -  total flux cleaned = 0.00956979 Jy
! Component: 400  -  total flux cleaned = 0.00975814 Jy
! Component: 450  -  total flux cleaned = 0.0106791 Jy
! Component: 500  -  total flux cleaned = 0.010854 Jy
! Component: 550  -  total flux cleaned = 0.0115467 Jy
! Component: 600  -  total flux cleaned = 0.011718 Jy
! Component: 650  -  total flux cleaned = 0.0115611 Jy
! Component: 700  -  total flux cleaned = 0.0109366 Jy
! Component: 750  -  total flux cleaned = 0.0103317 Jy
! Component: 800  -  total flux cleaned = 0.00989513 Jy
! Component: 850  -  total flux cleaned = 0.00946999 Jy
! Component: 900  -  total flux cleaned = 0.0093312 Jy
! Component: 950  -  total flux cleaned = 0.00892119 Jy
! Component: 1000  -  total flux cleaned = 0.00826255 Jy
! Component: 1050  -  total flux cleaned = 0.00800887 Jy
! Component: 1100  -  total flux cleaned = 0.00750987 Jy
! Component: 1150  -  total flux cleaned = 0.00714315 Jy
! Component: 1200  -  total flux cleaned = 0.00690709 Jy
! Component: 1250  -  total flux cleaned = 0.00667691 Jy
! Component: 1300  -  total flux cleaned = 0.00690357 Jy
! Component: 1350  -  total flux cleaned = 0.00668422 Jy
! Component: 1400  -  total flux cleaned = 0.00657787 Jy
! Component: 1450  -  total flux cleaned = 0.00626272 Jy
! Component: 1500  -  total flux cleaned = 0.00616101 Jy
! Component: 1550  -  total flux cleaned = 0.0058612 Jy
! Component: 1600  -  total flux cleaned = 0.00566188 Jy
! Component: 1650  -  total flux cleaned = 0.0055641 Jy
! Component: 1700  -  total flux cleaned = 0.00518601 Jy
! Component: 1750  -  total flux cleaned = 0.0045383 Jy
! Component: 1800  -  total flux cleaned = 0.00435942 Jy
! Component: 1850  -  total flux cleaned = 0.00400436 Jy
! Component: 1900  -  total flux cleaned = 0.00400499 Jy
! Component: 1950  -  total flux cleaned = 0.00366124 Jy
! Component: 2000  -  total flux cleaned = 0.00349322 Jy
! Total flux subtracted in 2048 components = 0.00332897 Jy
! Clean residual min=-0.004429 max=0.004538 Jy/beam
! Clean residual mean=-0.000042 rms=0.001574 Jy/beam
! Combined flux in latest and established models = 4.71949 Jy
keep
! Adding 122 model components to the UV plane model.
! The established model now contains 299 components and 4.71949 Jy
![Exited script file: muppet]
wmap "J1613+3412_X_2006_02_16_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8755 x 2.272 at 17.45 degrees (North through East)
! Clean map  min=-0.01091  max=3.2035 Jy/beam
! Writing clean map to FITS file: J1613+3412_X_2006_02_16_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 3.20347 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00155585 
device "J1613+3412_X_2006_02_16_yyk\_map.eps/VPS"
! Attempting to open device: 'J1613+3412_X_2006_02_16_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.145703 0.145703 0.291406 0.582812 1.16562 2.33125 4.6625 9.325 18.65 37.3 74.6
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0046 
print "peak=",int(peak_flux*1000)/1000
! peak= 3.203 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8755 x 2.272 at 17.45 degrees (North through East)
! Clean map  min=-0.01091  max=3.2035 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1613+3412_X_2006_02_16_yyk\_map.gif/gif"
! Attempting to open device: 'J1613+3412_X_2006_02_16_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1613+3412_X_2006_02_16_yyk_uvs.log closed on Wed Jul  5 12:57:26 2006