Control Room - 1957
A view of the Control Room from the Observation Room.
View medium photo | View large photo
Skip navigation
home
photos & video
lessons
research
museum display
airport expansion and the RETF
Control Room - 1957
A view of the Control Room from the Observation Room.
View medium photo | View large photo
Control Room - 1957
View in the Control Room. Engineers at the control panels.
View medium photo | View large photo
New Laboratory - 1957
This is a picture of a bottle farm at RETF South 40 ca.1957.
View medium photo | View large photo
Rocket Test Stand - 1957
20,000 pound rocket test stand and engine installation at the South 40 Rocket Research Facility.
View medium photo | View large photo
Engineer - 1957
Engineer in Building 100 control room examining data printout.
View medium photo | View large photo
Control Room - 1955
Building 100 control room, showing personnel with data recording instrumentation.
View medium photo | View large photo
Rocket Lab Shop - 1958
Assembly of 20K rocket engine in rocket lab shop.
View medium photo | View large photo
Rocket Lab Shop - 1958
Assembly of 20K rocket engine in rocket lab shop.
View medium photo | View large photo
Rocket Lab Shop - 1958
Assembly of 20K rocket engine in rocket lab shop.
View medium photo | View large photo
Engine Wrapping - 1959
Rocket engine wrapping operation in the machine shop.
View medium photo | View large photo
Flow Disturbance - 1959
Flow disturbance device and thrust chamber setup at the RETF.
View medium photo | View large photo
Rocket Model - 1959
4000 pound rocket model.
View medium photo | View large photo
Robert J. Gardner - 1959
Robert J. Gardner pressure checking fuel impinging qualities of 20K pound rocket injector at the RETF.
View medium photo | View large photo
Flow patterns - 1960
Checking flow pattern of Rocket Engine Ejector at RETF using water.
View medium photo | View large photo
Rocket Installation - 1960
20K rocket installation showing streak camera setup at the RETF.
View medium photo | View large photo
Engineer - 1962
Engineer in Building 100 control room examining data printout.
View medium photo | View large photo
RETF - 1965
Interior and exterior views of the RETF.
View medium photo | View large photo
Zone Injector - 1966
Zone Injector Rocket Engine at the RETF test stand.
View medium photo | View large photo
Zone Injector - 1966
Zone Injector Rocket Engine at the RETF test stand.
View medium photo | View large photo
Sliding Injector - 1967
Sliding injector on the test stand in the RETF.
View medium photo | View large photo
Oxidant Dome - 1967
Variable orifice in oxidant dome of the rocket engine test rig at the RETF.
View medium photo | View large photo
Calorimeter - 1972
Ed Krawczonek at the pressurizing panel for the Calorimeter.
View medium photo | View large photo
Control Console - 1976
Rocket operations control console and liquid hydrogen bearing rig in the fluid mechanics laboratory FMLEngineers Lorenz Leopold and David Vincent at work at the operations control console.
View medium photo | View large photo
Ribbon Cutting Ceremony
George Repas shows NASA Lewis Research Director Dr. John F. McCarthy the B stand.
View medium photo | View large photo
Ribbon Cutting Ceremony
B Stand ribbon cutting ceremony - RETF - Standing left to right are: George Repas, Alvin Pavli, Wayne Thomas, Joe Etzler, Neal Wingenfeld, Ed Krawczonek in the control room at the RETF.
View medium photo | View large photo
Test Crew - 1984
RETF test crew in action - Standing left to right are: Joe Etzler, Neal Wingenfeld, Ed Krawczonek, Mark Klem.
View medium photo | View large photo
Ratio Rocket Engine - 1985
1000 to 1 area ratio rocket engine mounted in new altitude test stand.
View medium photo | View large photo
Control Room - 1987
ROB (Rocket Operations Building) control room instrumentation - Ed Krawczonek and C. Joe Morgan.
View medium photo | View large photo
Centaur - 1961
Centaur start tests - Bob Gardner.
View medium photo | View large photo
Hydrogen Transfer - 1964
Hydrogen transfer from the roadable dewar to the main tank.
View medium photo | View large photo
A-Stand - 1986
A-Stand with water cooled calorimeter plug engine - Arlette Haeberle, technician.
View medium photo | View large photo
Fred Kubiak and Bob Braun - 1987
Fred Kubiak and Bob Braun doing hydrazine transfer at test stand B.
View medium photo | View large photo
Inside - 1989
Examining A-Stand scrubber are left to right: C. Joe Morgan, Hamilton Fernandez, Ed Krawczonek and persons unknown.
View medium photo | View large photo
home
photos & video
lessons
research
museum display
airport expansion and the RETF
Go to the Flash version of this site
Visit main NASA site
Web Curator: history@grc.nasa.gov
Responsible NASA Official: Kevin P. Coleman
Accessibility Information : http://www.grc.nasa.gov/Doc/access.html
NASA Privacy Statement: http://www.grc.nasa.gov/Doc/privacy.html
