Procurement SIBR Records
SDO |
Document Number |
Document Title |
Edition |
Incorp By |
Federal Specifications Standards and Test Methods |
A-A-55494B |
Fuse Cartridge, Semiconductor Type, 250 Volts |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55495B |
Fuse Cartridge, Semiconductor Type, 500 Volts |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55496B |
Fuse Cartridge, Semiconductor Type, 700 Volts |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55497C |
Fuse Link, Electrical, Type K (Fast) |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55498C |
Fuse Link, Electrical, Type T (Slow) |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55500 |
Shielding Bead, Electronic General Requirements for |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55500/1 |
Surface Mount Shielding Bead |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55501B |
Resistors, Fixed, Zero OHM, 1/4 Watt |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55502B |
Resistors, Fixed, Zero OHM, 1/8 Watt |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55504A |
Fuseholder, Extractor Post, Which Accommodates 3AG (.25 Inch |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55504/1A |
Fuseholder, Extractor Post, Front Mount, Low Profile, Finger |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55504/2A |
Fuseholder, Extractor Post, Front Mount, High Profile, Finge |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55504/3A |
Fuseholder, Extractor Post, Front or Rear Mount, Finger Grip |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55504/4A |
Fuseholder, Extractor Post, Low Profile, Snap-In, Front Moun |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55504/5A |
Fuseholder, Extractor Post, Front Mount, Low Profile, Screwd |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55504/6A |
Fuseholder, Extractor Post, High Profile, Front Mount, Screw |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55506A |
Filter, Radio Frequency Interference |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55507A |
Clip, Electrical, Fuse, General Requirements For |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55507/1A |
Clip, Electrical, Fuse, 30 and 60 Ampere, For Fuse Diameter |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55507/2 |
Clip, Electrical, Fuse, P.C. Board, 15and 30 Ampere, For Fus |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55508B |
Fuseholder, Block, 30 Amperes (A), 250 Volts (V) AC, 1 to 12 |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55509A |
Fuse, Indicator Alarm |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55512A |
Resistor, Thermally Sensitive (Thermistor) |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55513 |
Connectors, Electrical, IEEE 488 Compatible, Rectangular, Mi |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55514 |
Connectors, Electrical, IEEE 488 Compatible, Rectangular, Mi |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55515 |
Connectors, Electrical, IEEE 488 Compatible, Rectangular, Mi |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55516 |
Microcircuit, Linear, Video Analog Input Interface, Monolith |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55517A |
Resistor, Fixed, Carbon Film, General Requirements for |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55517/1B |
Resistor, Fixed, Carbon Film, 1/8 Watt |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55517/2B |
Resistor, Fixed, Carbon Film, 1/4 Watt |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55517/3B |
Resistor, Fixed, Carbon Film, 1/2 Watt |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55517/4B |
Resistor, Fixed, Carbon Film, 1 Watt |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55517/5B |
Resistor, Fixed, Carbon Film, 2 Watt |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55518A |
Fuseholder, Block, General Requirement |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55518/2A |
Fuseholder, Block, 30 Ampere (A), 250 Volts (V) AC, 1 Throug |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55518/3A |
Fuseholder, Block, 30 Ampere (A), 250 Volts (V) AC, 1 Throug |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55518/4A |
Fuseholder, Block, 30 Ampere (A), 250 Volts (V) AC, 1 Throug |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55519A |
Fuse, Inclosed Lonk, Subminiature, Surface Mount (SM), Gener |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55519/1 |
Fuse, Inclosed Link, Subminiature, Surface Mount (SM), Very |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55519/2B |
Fuse , Inclosed Link, Subminiature, Surface Mount (SM), Time |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55519/3A |
Fuse, Inclosed Link, Subminiature, Surface Mount (SM), Very |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55519/4A |
Fuse, Inclosed Link, Subminiature, Surface Mount (SM), Time |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55520 |
Cleaning Kit, Automatic Data Processing Equipment, Disk Driv |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55520/1 |
Cleaning Kit, Automatic Data Processing Equipment, Disk driv |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55520/2 |
Cleaning Kit, Automatic Data Processing Equipment, Disk Driv |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55520/3 |
Cleaning Kit, Automatic Data Processing Equipment, Disk Driv |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55522A |
Barbed Tape, Concertina |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55523 |
Posts, Fence: Drive-Type, Spadeless |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55524 |
Shunt, Instrument (External, 50 Millivolt, Lightweight Type) |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55524/1A |
Shunt, Instrument (External, 50 Millivolt, 10 Through 150 Am |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55524/2A |
Shunt, Instrument (External, 50 Millivolt, 170 Through 600 A |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55524/3A |
Shunt, Instrument (External, 50 Millivolt, 800 Through 1200 |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55525 |
Lathe, Armature, and Undercutter |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55526 |
Microcircuit, Linear, Power Operational Amplifier, Monolith |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55527 |
Fillers For Rotary Sweeper Brush: For Sweeper, Front Mounted |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55528 |
Connectors, Telecommunication, Polarized Shell, Plug, Male R |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55531 |
Connectors, Telecommunication, Polarized Shell, Receptacle, |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55534A |
Resistor, Fixed, Power Type (Very Low Resistance Values), Ge |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55534/1A |
Resistors, Fixed, Wire Wound or Metal Element, (Power Type) |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-55534/2B |
Resistors, Fixed, Chip, Very Low Values (Power Type) Style V |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-54165 |
Bur, Bone, Tungsten Carbide General Specification for |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-54165/1 |
Bur, Bone, Tungsten Carbide, Side Cutting, 19 mm Cutting Len |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-54165/2 |
Bur, Bone, Tungsten Carbide, Round Cutting, 1.5 mm Head Diam |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-54165/3 |
Bur, Bone, Tungsten Carbide, Round Cutting, 2 mm Head Diamet |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-54165/4 |
Bur, Bone, Tungsten Carbide, Round Cutting, 2 mm Head Diamet |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-54165/5 |
Bur, Bone, Tungsten Carbide, Side Cutting, 7.5 mm Cutting Le |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-54165/6 |
Bur, Bone, Tungsten Carbide, Side Cutting, 19 mm Cutting Len |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-54165/7 |
Bur, Bone, Tungsten Carbide, Round Cutting, 1.5 mm Head Diam |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-54165/8 |
Bur, Bone, Tungsten Carbide, Side Cutting, 7.5 mm Cutting Le |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-54165/9 |
Bur, Bone, Tungsten Carbide, Oval Cutting, 8 mm Cutting Leng |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-54165/10 |
Bur, Bone, Tungsten Carbide, Oval Cutting 10 mm Cutting Leng |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-54165/11 |
Bur, Bone, Tungsten Carbide, Oval Cutting, 8 mm Cutting Leng |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-54165/12 |
Bur, Bone, Tungsten Carbide, Oval Cutting, 10 mm Cutting Len |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-54165/13 |
Bur, Bone, Tungsten Carbide, Oval Cutting, 5 mm Cutting Leng |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-54165/14 |
Bur, Bone, Tungsten Carbide, Barrel Cutting, Medium Shank |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-54165/15 |
Bur, Bone, Tungsten Carbide, Barrel Cutting, Long Shank |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-54165/16 |
Bur, Bone, Tungsten Carbide, Round Cutting, 3 mm Head Diamet |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-54165/17 |
Bur, Bone, Tungsten Carbide, Round Cutting, 5 mm Head Diamet |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-54165/18 |
Bur, Bone, Tungsten Carbide, Round Cutting, 5 mm Head Diamet |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-54165/19 |
Bur, Bone, Tungsten Carbide, Round Cutting, 4.0 mm Head Diam |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-54165/20 |
Bur, Bone, Tungsten Carbide, Round Cutting, 4.0 mm Head Diam |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-54165/21 |
Bur, Bone, Tungsten Carbide, Side Cutting, 4.5 mm Cutting Le |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-54165/22 |
Bur, Bone, Tungsten Carbide, Side Cutting, 10 mm Cutting Len |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-54165/23 |
Bur, Bone, Tungsten Carbide, Side Cutting, 12 mm Cutting Len |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-54167 |
Forceps, Eye, Utility, Angular, Nugent |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-58061 |
Soldering - Desoldering Station |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-58062 |
Closed Circuit Impact Crusher and Screening Plant |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-58063 |
High Speed Snow Broom, Mounted On A 44,500 Lbs GVW (Minimum) |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-58064 |
Resistor, Decade (0.01-111, 111.1 OHM) |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-58065B |
Mounter-Demounter, Pneumatic Tire, Stationary |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-58066 |
Shaver, Rivet Head, Portable, Pneumatic |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-58067 |
Truck, Lift, Fork, Diesel-Engine-Driven, Pneumatic-Tired, 15 |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-58068 |
Truck, Lift, Fork, Electric, Sit Down, Solid Tires, 6,000 Po |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-58069 |
Truck, Lift, Fork, Electric, Order Selector, High Lift Ride |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-58070 |
Gage, Indicator Bore |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-58071 |
Test Set, Radio Frequency Power (50 Mhz to 26.5 Ghz) |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-58072 |
Test Set, Telephone |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-58073 |
Test Set, Ultrasonic |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-58074 |
Test Set, Ultrasonic, Bond |
NDG |
GSA |
Federal Specifications Standards and Test Methods |
A-A-58075 |
Holder, Countersink, Adjustable Micrometer Stop |
NDG |
GSA |