Descriptions | |
FDMS: | Obtaining Data |
Documentation Abstract: |
Behavior of Mock-Ups in the California Technical Bulletin 133 Test Protocol: Fabric and Barrier Effects. |
Material: | Polyester 100% Fabric / Aramid (Kevlar) Interliner / Cal 117 Polyurethane |
Lab: | National Institute of Standards and Technology |
Sponsor: | National Institute of Standards and Technology |
Date: | 4/29/1994 |
Test Ref No: | T6322 |
Tested by: | Randy Shields |
Approved by Scientific Officer: | Thomas Ohlemiller |
Mass Lost: | 2562.92 g/m2 | Total Heat Released: | 52.9526 MJ/m2 |
Peak RHR: | 251.754 kW/m2 | Peak Mass Loss Rate: | 13.8137 g/m2s |
Units | Test Mean | 60 s | 180 s | 300 s | |
Heat Release | kW/m2 | 65.02 | 128.956 | 106.752 | 110.109 |
Mass Loss Rate | g/m2s | 0.00326229 | 0.00791526 | 0.00602023 | 0.00563979 |
Heat of Combustion | MJ/kg | 20661000 | 16.2921 | 17.7322 | 19.5236 |
Specific Ext. Area | m2/kg | - | - | - | - |
Carbon Dioxide | kg/kg | 1.88548 | 1.54888 | 1.84099 | 1.89764 |
Carbon Monoxide | kg/kg | 0.0588515 | 0.0255392 | 0.0204897 | 0.0186235 |
Flame out time 14min 4sec/844second.Sample(fabric melts/top
surface smokes-charring 12sec),fabric charred 45sec,(edges
flame/top surface barrier charred 63sec),edge flame increas-
ing 2min 35sec,flames back edge barrier burn thru 7min30sec,
and flame burn thru barrier split open 11min 30second.T6322
Heat Flux: | 35 kW/m2 | Nominal Flow: | 24 l/s |
Orifice Constant: | 0.0426847 | Heat per Unit Mass O2: | 13.1 J/kg |
Heater Orientation: | H | Spark Ignitor Used: | Y |
Grid Used: | N | Frame Used: | N |
Conditioning: | 50 RH @ 296 K | Test Conditions: | 50 RH |
Specimen Thickness: | - | Specimen Area: | 0.01 m2 |
Initial Mass: | 0.0309 g | Time of Peak RHR: | 35 s |
Final Mass: | 0.00527075 g | Peak RHR: | 251.754 kW/m2 |
Mass Lost: | 2562.92 g/m2 | Peak Mass Loss Rate: | 13.8137 g/m2s |
Ignition Time: | 21 s | Peak Extinction Area: | - |
Flameout Time: | 844 s | Total Heat Released: | 52.9526 MJ/m2 |
Publication Status: | Internally reviewed report |
Statistical Basis of Data: | Replicate data available for the same test method and test conditions |
Material Development/ Production Status: | Material currently in production |
Evaluation Status: | Data have been validated |
Laboratory Accreditation Status: | The laboratory is recognized by (inter)national accreditation bodies |
Completeness of Material Description: | Full information on material |
Completeness of Test Procedure Description: | Standard test procedure |