Processing Job Log for Sequence 10011010, version 006

The following information is also available:

• The processing log index
• An index of processing errors

Processing started ( 18:13:08 )

Fetching and uncompressing telemetry, attitude and orbit files ( 18:13:10 )

 
Time column is TIME ORDERED

Determine nominal aspect point for the observation ( 18:16:37 )

ATTITUDE_V0.9j
 
   reading attitude file:./merged.tmp
   open asc  output file:out.tmp
 
 AVERAGE ASPECT AND OFFSET FOR THIS ATTITUDE FILE:
 
 Attitude file start and stop ascatime :   8914802.724600   8995179.939100
 Data     file start and stop ascatime :   8914802.724600   8995179.939100
 Aspecting run start and stop ascatime :   8914802.724704   8995179.938985
 
 Time interval averaged over (seconds) :     80377.214281
 Total pointing and manuver time (sec) :     49307.976562     31069.484375
 
 Mean boresight Euler angles :     94.634040      67.198208     177.903328
 
                                    RA             DEC         SUN ANGLE
 
 Mean solar position   (deg) :     21.95           9.20
 Mean aberration    (arcsec) :     -7.40           0.03
 
 Mean sat X-axis       (deg) :    269.237506      67.107135      90.05
 Mean sat Y-axis       (deg) :      3.821178       1.932754      19.44
 Mean sat Z-axis       (deg) :     94.634040      22.801793      70.56
 
                      RA            DEC            ROLL          OFFSET
                    (deg)          (deg)          (deg)         (arcmin)
 
 Average            94.356369      22.678408      88.009827       0.600804
 Minimum            94.302223      22.612709      87.996315       0.161932
 Maximum            94.371689      22.685400      88.052483       4.919353
 Sigma (RMS)         0.001684       0.002053       0.009338       0.986296
 
 Number of ASPECT records processed =      77430
 
 Aspecting to RA/DEC                   :      94.35636902      22.67840767
    closing output   file...
    closing attitude file...

  
 Opening file: ./out.tmp                                                       
  
  ***************** Observation Info ******************
  
  RA (J2000 deg):   94.356 DEC:   22.678
  
  START TIME: SC   8914802.7247 = UT 14/04/93 04:20:02      
  
  ****** Definition of Attitude SENSOR Bit Flags ******
  
 Sensors used in the attitude determination and attitude control mode  
                                 1: USED,   0: NOT USED                
  
 B0:STT-A, B1:STT-B, B2:NSAS,  B3:GAS,    B4:SSAS-SA, B5:SSAS-SB,      
 B6:IRU-X, B7:IRU-Y, B8:IRU-Z, B9:IRU-S1, B10:IRU-S2,                  
 B11: Attitude control mode    1: coarse, 0: fine                      
 B12: Sun presence             1: day,    0: night                     
 B13: STT-A earth occultation  1: earth occultation, 0: no occultation 
 B14: STT-B earth occultation  1: earth occultation, 0: no occultation 
 B16,17,18: STT-A track stars no.1,2,3,     1: USED, 0: NOT USED       
 B19,20,21: STT-B track stars no.1,2,3,     1: USED, 0: NOT USED       
 B22,23: always 0                                                      
  
  ******** Attitude File Reconstruction Summary *******
  
                                    S S N G S S I I I I I A S S S S S
                                    T T S A S S R R R R R C U T T T T
                                    T T A S A A U U U U U M N T T T T
                                    - - S . A A - - - - - . . - - - -
                                    A B . . - - X Y Z S S . . A B A B
                                    . . . . S S . . . 1 2 . . O O S S
     offset_time separation sensor  . . . . A B . . . . . . . C C T T
        (sec)     (arcmin)          . . . . . . . . . . . . . C C R R
  
                             BIT:   0 1 2 3 4 5 6 7 8 9 A B C D E
  
       0.500122      4.794   4603   1 1 0 0 0 0 0 0 0 1 1 0 0 0 1 0 0
    1397.995239      4.841   4803   1 1 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
    2033.993164      3.836   4803   1 1 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
    2089.492920      2.835   4803   1 1 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
    2157.992676      1.818   4803   1 1 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
    2309.992188      0.809   4803   1 1 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
    3625.987305      0.679 184443   1 1 0 0 0 0 1 0 0 0 1 0 0 0 1 0 3
    7161.974609      1.192   4803   1 1 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
    9385.966797      0.667 184443   1 1 0 0 0 0 1 0 0 0 1 0 0 0 1 0 3
   12921.954102      0.878   4803   1 1 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
   15133.946289      0.441   4403   1 1 0 0 0 0 0 0 0 0 1 0 0 0 1 0 0
   18675.933594      0.441   4803   1 1 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
   20905.925781      0.445 184443   1 1 0 0 0 0 1 0 0 0 1 0 0 0 1 0 3
   24441.914062      0.461   4803   1 1 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
   26665.906250      0.443 184443   1 1 0 0 0 0 1 0 0 0 1 0 0 0 1 0 3
   30201.892578      0.446   4803   1 1 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
   32413.884766      0.422   4403   1 1 0 0 0 0 0 0 0 0 1 0 0 0 1 0 0
   35953.871094      0.460   4803   1 1 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
   38185.863281      0.442 184443   1 1 0 0 0 0 1 0 0 0 1 0 0 0 1 0 3
   41721.851562      0.427   4803   1 1 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
   43933.843750      0.398   4403   1 1 0 0 0 0 0 0 0 0 1 0 0 0 1 0 0
   47481.832031      0.404   4803   1 1 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
   49705.824219      0.362 184443   1 1 0 0 0 0 1 0 0 0 1 0 0 0 1 0 3
   53241.812500      0.336   4803   1 1 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
   55453.804688      0.259   4403   1 1 0 0 0 0 0 0 0 0 1 0 0 0 1 0 0
   59001.789062      0.250   4803   1 1 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
   61213.781250      0.216   4403   1 1 0 0 0 0 0 0 0 0 1 0 0 0 1 0 0
   64761.769531      0.236   4803   1 1 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
   66971.765625      0.193   4403   1 1 0 0 0 0 0 0 0 0 1 0 0 0 1 0 0
   70521.750000      0.229   4803   1 1 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
   72731.742188      0.201   4403   1 1 0 0 0 0 0 0 0 0 1 0 0 0 1 0 0
   76281.726562      0.242   4803   1 1 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
   78491.718750      0.281   4403   1 1 0 0 0 0 0 0 0 0 1 0 0 0 1 0 0
   80377.210938      0.314   4603   1 1 0 0 0 0 0 0 0 1 1 0 0 0 1 0 0
  
  Attitude  Records:   77430
  Attitude    Steps:   34
  
  Maneuver ACM time:     31069.5 sec
  Pointed  ACM time:     49308.0 sec
  

100 99 count=92 sum1=8701.82 sum2=6187.56 sum3=16369.6
100 100 count=3740 sum1=353732 sum2=251560 sum3=665495
101 98 count=81 sum1=7662.26 sum2=5446.9 sum3=14411.8
101 99 count=16 sum1=1513.44 sum2=1076.02 sum3=2846.82
102 97 count=80 sum1=7568.45 sum2=5378.92 sum3=14233.4
102 98 count=5 sum1=473.005 sum2=336.205 sum3=889.6
103 96 count=35 sum1=3311.48 sum2=2353.01 sum3=6226.96
103 97 count=20 sum1=1892.22 sum2=1344.63 sum3=3558.27
104 95 count=20 sum1=1892.54 sum2=1344.34 sum3=3558.12
104 96 count=7 sum1=662.349 sum2=470.556 sum3=1245.36
105 93 count=53803 sum1=5.09172e+06 sum2=3.61522e+06 sum3=9.57164e+06
105 94 count=53 sum1=5015.78 sum2=3562.02 sum3=9428.69
105 95 count=16 sum1=1514.12 sum2=1075.39 sum3=2846.44
106 93 count=14493 sum1=1.37164e+06 sum2=973864 sum3=2.57826e+06
106 94 count=4413 sum1=417668 sum2=296573 sum3=785068
106 95 count=546 sum1=51675.7 sum2=36698.1 sum3=97134.5
107 94 count=9 sum1=851.85 sum2=604.836 sum3=1601.08
0 out of 77429 points outside bin structure

Running frfread on telemetry files ( 18:19:26 )

frf_directory,s,h,"./",,,"frf directory"
frf_file,s,h,"ft930414_0420.0239",,,"frf telemetry file"

Frfread version 3.00 patch 32
ASCA format
Telemetry file: ft930414_0420.0239
Initial mode = 2  (Bright)
Initial value for dummy = 0
Initial datamode = 0  (Observation)
Initial sis = 1
Initial bit_rate = 4
Reading all superframes
reading PH mode
reading PCAL mode
reading MPCmode
No mode = 0
Faint = 976336
Bright = 259376
Fast = 0
Frame = 0
Dark frame = 0
Histogram = 0
Integration = 0
PH = 1235712
MPC = 0
PCAL = 0
Memory Check = 0
Number of superframes = 19476
no. of SIS events found = 1956333

coordinate error 0 0
coordinate error 0 0
coordinate error 0 192
coordinate error 0 0
coordinate error 12 0
coordinate error 192 0
coordinate error 0 0
coordinate error 0 0
coordinate error 256 0
coordinate error 1 0
coordinate error 0 0
coordinate error 6 0
coordinate error 0 0
coordinate error 430 12
coordinate error 508 12
coordinate error 0 112
coordinate error 36 441
coordinate error 0 249
coordinate error 0 256
coordinate error 0 0
coordinate error 338 460
coordinate error 0 24
coordinate error 163 0
coordinate error 130 482
coordinate error 16 504
coordinate error 93 448
coordinate error 3 3
coordinate error 0 384
coordinate error 0 0
coordinate error 0 0
coordinate error 261 451
coordinate error 48 0
coordinate error 0 0
coordinate error 0 0
coordinate error 102 478
coordinate error 166 478
coordinate error 38 478
coordinate error 450 126
coordinate error 3 206
coordinate error 461 432
coordinate error 439 413
coordinate error 0 0
coordinate error 430 169
coordinate error 490 361
coordinate error 11 0
coordinate error 1 165
coordinate error 0 0
coordinate error 467 192

ft930414_0420_0239G200270H.fits
ft930414_0420_0239G200370H.fits
ft930414_0420_0239G200470M.fits
ft930414_0420_0239G200570M.fits
ft930414_0420_0239G203999.fits
ft930414_0420_0239G205170M.fits
ft930414_0420_0239G205270M.fits
ft930414_0420_0239G205399.fits
ft930414_0420_0239G205670M.fits
ft930414_0420_0239G205970H.fits
ft930414_0420_0239G206070H.fits
ft930414_0420_0239G206170H.fits
ft930414_0420_0239G206670M.fits
ft930414_0420_0239G207070M.fits
ft930414_0420_0239G207199.fits
ft930414_0420_0239G207599.fits
ft930414_0420_0239G207799.fits
ft930414_0420_0239G207970H.fits
ft930414_0420_0239G208070M.fits
ft930414_0420_0239G208170M.fits
ft930414_0420_0239G208899.fits
ft930414_0420_0239G209170H.fits
ft930414_0420_0239G209270M.fits
ft930414_0420_0239G209370M.fits
ft930414_0420_0239G210099.fits
ft930414_0420_0239G210570H.fits
ft930414_0420_0239G210670M.fits
ft930414_0420_0239G210770M.fits
ft930414_0420_0239G210899.fits
ft930414_0420_0239G211399.fits
ft930414_0420_0239G211670H.fits
ft930414_0420_0239G211770M.fits
ft930414_0420_0239G211870M.fits
ft930414_0420_0239G212599.fits
ft930414_0420_0239G300270H.fits
ft930414_0420_0239G300370H.fits
ft930414_0420_0239G300470M.fits
ft930414_0420_0239G300570M.fits
ft930414_0420_0239G301870M.fits
ft930414_0420_0239G307370H.fits
ft930414_0420_0239G308099.fits
ft930414_0420_0239G309470M.fits
ft930414_0420_0239G309570M.fits
ft930414_0420_0239G309699.fits
ft930414_0420_0239G309970M.fits
ft930414_0420_0239G310270H.fits
ft930414_0420_0239G310370H.fits
ft930414_0420_0239G310470H.fits
ft930414_0420_0239G310970M.fits
ft930414_0420_0239G311370M.fits
ft930414_0420_0239G311499.fits
ft930414_0420_0239G311899.fits
ft930414_0420_0239G312099.fits
ft930414_0420_0239G312270H.fits
ft930414_0420_0239G312370H.fits
ft930414_0420_0239G312470M.fits
ft930414_0420_0239G312570M.fits
ft930414_0420_0239G313299.fits
ft930414_0420_0239G313570H.fits
ft930414_0420_0239G313670M.fits
ft930414_0420_0239G313770M.fits
ft930414_0420_0239G314270H.fits
ft930414_0420_0239G314499.fits
ft930414_0420_0239G314970H.fits
ft930414_0420_0239G315070M.fits
ft930414_0420_0239G315170M.fits
ft930414_0420_0239G315299.fits
ft930414_0420_0239G315799.fits
ft930414_0420_0239G316070H.fits
ft930414_0420_0239G316170M.fits
ft930414_0420_0239G316270M.fits
ft930414_0420_0239G316999.fits
ft930414_0420_0239S000302M.fits
ft930414_0420_0239S000501M.fits
ft930414_0420_0239S002001M.fits
ft930414_0420_0239S005499.fits
ft930414_0420_0239S005802M.fits
ft930414_0420_0239S006001M.fits
ft930414_0420_0239S006401H.fits
ft930414_0420_0239S006502M.fits
ft930414_0420_0239S006699.fits
ft930414_0420_0239S006802M.fits
ft930414_0420_0239S007002M.fits
ft930414_0420_0239S007101M.fits
ft930414_0420_0239S007201H.fits
ft930414_0420_0239S008099.fits
ft930414_0420_0239S008499.fits
ft930414_0420_0239S008699.fits
ft930414_0420_0239S008901M.fits
ft930414_0420_0239S009499.fits
ft930414_0420_0239S009601M.fits
ft930414_0420_0239S009802M.fits
ft930414_0420_0239S010199.fits
ft930414_0420_0239S010501M.fits
ft930414_0420_0239S010702M.fits
ft930414_0420_0239S010899.fits
ft930414_0420_0239S011199.fits
ft930414_0420_0239S011301M.fits
ft930414_0420_0239S011702H.fits
ft930414_0420_0239S011999.fits
ft930414_0420_0239S100302M.fits
ft930414_0420_0239S100501M.fits
ft930414_0420_0239S102001M.fits
ft930414_0420_0239S105599.fits
ft930414_0420_0239S105902M.fits
ft930414_0420_0239S106101M.fits
ft930414_0420_0239S106501H.fits
ft930414_0420_0239S106602M.fits
ft930414_0420_0239S106799.fits
ft930414_0420_0239S106902M.fits
ft930414_0420_0239S107102M.fits
ft930414_0420_0239S107201M.fits
ft930414_0420_0239S107301H.fits
ft930414_0420_0239S108199.fits
ft930414_0420_0239S108599.fits
ft930414_0420_0239S108799.fits
ft930414_0420_0239S109699.fits
ft930414_0420_0239S110002M.fits
ft930414_0420_0239S110499.fits
ft930414_0420_0239S110801M.fits
ft930414_0420_0239S111002M.fits
ft930414_0420_0239S111199.fits
ft930414_0420_0239S111499.fits
ft930414_0420_0239S111601M.fits
ft930414_0420_0239S112199.fits

ft930414_0420_0239S000102H.fits[3]
ft930414_0420_0239S000202H.fits[3]
ft930414_0420_0239S000402M.fits[3]
ft930414_0420_0239S000601H.fits[3]
ft930414_0420_0239S000702M.fits[3]
ft930414_0420_0239S000802M.fits[3]
ft930414_0420_0239S000902M.fits[3]
ft930414_0420_0239S001002M.fits[3]
ft930414_0420_0239S001102M.fits[3]
ft930414_0420_0239S001201H.fits[3]
ft930414_0420_0239S001301H.fits[3]
ft930414_0420_0239S001401H.fits[3]
ft930414_0420_0239S001501H.fits[3]
ft930414_0420_0239S001601H.fits[3]
ft930414_0420_0239S001702M.fits[3]
ft930414_0420_0239S001802M.fits[3]
ft930414_0420_0239S001902M.fits[3]
ft930414_0420_0239S002101H.fits[3]
ft930414_0420_0239S002201H.fits[3]
ft930414_0420_0239S002301H.fits[3]
ft930414_0420_0239S002401H.fits[3]
ft930414_0420_0239S002501H.fits[3]
ft930414_0420_0239S002601H.fits[3]
ft930414_0420_0239S002701H.fits[3]
ft930414_0420_0239S002801H.fits[3]
ft930414_0420_0239S002901H.fits[3]
ft930414_0420_0239S003001H.fits[3]
ft930414_0420_0239S003101H.fits[3]
ft930414_0420_0239S003201H.fits[3]
ft930414_0420_0239S003301H.fits[3]
ft930414_0420_0239S003401H.fits[3]
ft930414_0420_0239S003501H.fits[3]
ft930414_0420_0239S003601H.fits[3]
ft930414_0420_0239S003701H.fits[3]
ft930414_0420_0239S003801H.fits[3]
ft930414_0420_0239S003901H.fits[3]
ft930414_0420_0239S004001H.fits[3]
ft930414_0420_0239S004101H.fits[3]
ft930414_0420_0239S004201H.fits[3]
ft930414_0420_0239S004301H.fits[3]
ft930414_0420_0239S004401H.fits[3]
ft930414_0420_0239S004501H.fits[3]
ft930414_0420_0239S004601H.fits[3]
ft930414_0420_0239S004701H.fits[3]
ft930414_0420_0239S004801H.fits[3]
ft930414_0420_0239S004901H.fits[3]
ft930414_0420_0239S005001H.fits[3]
ft930414_0420_0239S005101H.fits[3]
ft930414_0420_0239S005201H.fits[3]
ft930414_0420_0239S005302M.fits[3]
ft930414_0420_0239S005502M.fits[3]
ft930414_0420_0239S005601H.fits[3]
ft930414_0420_0239S005702M.fits[3]
ft930414_0420_0239S005902M.fits[3]
ft930414_0420_0239S006101H.fits[3]
ft930414_0420_0239S006201H.fits[3]
ft930414_0420_0239S006301H.fits[3]
ft930414_0420_0239S006702M.fits[3]
ft930414_0420_0239S006902M.fits[3]
ft930414_0420_0239S007301H.fits[3]
ft930414_0420_0239S007402M.fits[3]
ft930414_0420_0239S007502M.fits[3]
ft930414_0420_0239S007602M.fits[3]
ft930414_0420_0239S007702M.fits[3]
ft930414_0420_0239S007802M.fits[3]
ft930414_0420_0239S007902M.fits[3]
ft930414_0420_0239S008102M.fits[3]
ft930414_0420_0239S008202H.fits[3]
ft930414_0420_0239S008302H.fits[3]
ft930414_0420_0239S008502H.fits[3]
ft930414_0420_0239S008702H.fits[3]
ft930414_0420_0239S008801H.fits[3]
ft930414_0420_0239S009002M.fits[3]
ft930414_0420_0239S009102M.fits[3]
ft930414_0420_0239S009202M.fits[3]
ft930414_0420_0239S009301H.fits[3]
ft930414_0420_0239S009501H.fits[3]
ft930414_0420_0239S009702M.fits[3]
ft930414_0420_0239S009902M.fits[3]
ft930414_0420_0239S010001H.fits[3]
ft930414_0420_0239S010201H.fits[3]
ft930414_0420_0239S010301H.fits[3]
ft930414_0420_0239S010401H.fits[3]
ft930414_0420_0239S010602M.fits[3]
ft930414_0420_0239S010902H.fits[3]
ft930414_0420_0239S011001H.fits[3]
ft930414_0420_0239S011201H.fits[3]
ft930414_0420_0239S011402M.fits[3]
ft930414_0420_0239S011502M.fits[3]
ft930414_0420_0239S011602M.fits[3]
ft930414_0420_0239S011801H.fits[3]
ft930414_0420_0239S012001H.fits[3]

ft930414_0420_0239S100102H.fits[3]
ft930414_0420_0239S100202H.fits[3]
ft930414_0420_0239S100402M.fits[3]
ft930414_0420_0239S100601H.fits[3]
ft930414_0420_0239S100702M.fits[3]
ft930414_0420_0239S100802M.fits[3]
ft930414_0420_0239S100902M.fits[3]
ft930414_0420_0239S101002M.fits[3]
ft930414_0420_0239S101102M.fits[3]
ft930414_0420_0239S101201H.fits[3]
ft930414_0420_0239S101301H.fits[3]
ft930414_0420_0239S101401H.fits[3]
ft930414_0420_0239S101501H.fits[3]
ft930414_0420_0239S101601H.fits[3]
ft930414_0420_0239S101702M.fits[3]
ft930414_0420_0239S101802M.fits[3]
ft930414_0420_0239S101902M.fits[3]
ft930414_0420_0239S102101H.fits[3]
ft930414_0420_0239S102201H.fits[3]
ft930414_0420_0239S102301H.fits[3]
ft930414_0420_0239S102401H.fits[3]
ft930414_0420_0239S102501H.fits[3]
ft930414_0420_0239S102601H.fits[3]
ft930414_0420_0239S102701H.fits[3]
ft930414_0420_0239S102801H.fits[3]
ft930414_0420_0239S102901H.fits[3]
ft930414_0420_0239S103001H.fits[3]
ft930414_0420_0239S103101H.fits[3]
ft930414_0420_0239S103201H.fits[3]
ft930414_0420_0239S103301H.fits[3]
ft930414_0420_0239S103401H.fits[3]
ft930414_0420_0239S103501H.fits[3]
ft930414_0420_0239S103601H.fits[3]
ft930414_0420_0239S103701H.fits[3]
ft930414_0420_0239S103801H.fits[3]
ft930414_0420_0239S103901H.fits[3]
ft930414_0420_0239S104001H.fits[3]
ft930414_0420_0239S104101H.fits[3]
ft930414_0420_0239S104201H.fits[3]
ft930414_0420_0239S104301H.fits[3]
ft930414_0420_0239S104401H.fits[3]
ft930414_0420_0239S104501H.fits[3]
ft930414_0420_0239S104601H.fits[3]
ft930414_0420_0239S104701H.fits[3]
ft930414_0420_0239S104801H.fits[3]
ft930414_0420_0239S104901H.fits[3]
ft930414_0420_0239S105001H.fits[3]
ft930414_0420_0239S105101H.fits[3]
ft930414_0420_0239S105201H.fits[3]
ft930414_0420_0239S105301H.fits[3]
ft930414_0420_0239S105402M.fits[3]
ft930414_0420_0239S105602M.fits[3]
ft930414_0420_0239S105701H.fits[3]
ft930414_0420_0239S105802M.fits[3]
ft930414_0420_0239S106002M.fits[3]
ft930414_0420_0239S106201H.fits[3]
ft930414_0420_0239S106301H.fits[3]
ft930414_0420_0239S106401H.fits[3]
ft930414_0420_0239S106802M.fits[3]
ft930414_0420_0239S107002M.fits[3]
ft930414_0420_0239S107401H.fits[3]
ft930414_0420_0239S107502M.fits[3]
ft930414_0420_0239S107602M.fits[3]
ft930414_0420_0239S107702M.fits[3]
ft930414_0420_0239S107802M.fits[3]
ft930414_0420_0239S107902M.fits[3]
ft930414_0420_0239S108002M.fits[3]
ft930414_0420_0239S108202M.fits[3]
ft930414_0420_0239S108302H.fits[3]
ft930414_0420_0239S108402H.fits[3]
ft930414_0420_0239S108602H.fits[3]
ft930414_0420_0239S108802H.fits[3]
ft930414_0420_0239S108901H.fits[3]
ft930414_0420_0239S109001M.fits[3]
ft930414_0420_0239S109102M.fits[3]
ft930414_0420_0239S109202M.fits[3]
ft930414_0420_0239S109302M.fits[3]
ft930414_0420_0239S109402H.fits[3]
ft930414_0420_0239S109501H.fits[3]
ft930414_0420_0239S109701H.fits[3]
ft930414_0420_0239S109801M.fits[3]
ft930414_0420_0239S109902M.fits[3]
ft930414_0420_0239S110102M.fits[3]
ft930414_0420_0239S110202H.fits[3]
ft930414_0420_0239S110301H.fits[3]
ft930414_0420_0239S110501H.fits[3]
ft930414_0420_0239S110601H.fits[3]
ft930414_0420_0239S110701H.fits[3]
ft930414_0420_0239S110902M.fits[3]
ft930414_0420_0239S111202H.fits[3]
ft930414_0420_0239S111301H.fits[3]
ft930414_0420_0239S111501H.fits[3]
ft930414_0420_0239S111702M.fits[3]
ft930414_0420_0239S111802M.fits[3]
ft930414_0420_0239S111902M.fits[3]
ft930414_0420_0239S112001H.fits[3]
ft930414_0420_0239S112201H.fits[3]

ft930414_0420_0239G200170H.fits[3]
ft930414_0420_0239G200670M.fits[3]
ft930414_0420_0239G200770M.fits[3]
ft930414_0420_0239G200870H.fits[3]
ft930414_0420_0239G200970H.fits[3]
ft930414_0420_0239G201070H.fits[3]
ft930414_0420_0239G201170H.fits[3]
ft930414_0420_0239G201270H.fits[3]
ft930414_0420_0239G201370H.fits[3]
ft930414_0420_0239G201470M.fits[3]
ft930414_0420_0239G201570M.fits[3]
ft930414_0420_0239G201670H.fits[3]
ft930414_0420_0239G201770H.fits[3]
ft930414_0420_0239G201870H.fits[3]
ft930414_0420_0239G201970H.fits[3]
ft930414_0420_0239G202070H.fits[3]
ft930414_0420_0239G202170H.fits[3]
ft930414_0420_0239G202270M.fits[3]
ft930414_0420_0239G202370M.fits[3]
ft930414_0420_0239G202470H.fits[3]
ft930414_0420_0239G202570H.fits[3]
ft930414_0420_0239G202670H.fits[3]
ft930414_0420_0239G202770H.fits[3]
ft930414_0420_0239G202870H.fits[3]
ft930414_0420_0239G202970H.fits[3]
ft930414_0420_0239G203070H.fits[3]
ft930414_0420_0239G203170H.fits[3]
ft930414_0420_0239G203270H.fits[3]
ft930414_0420_0239G203370H.fits[3]
ft930414_0420_0239G203470H.fits[3]
ft930414_0420_0239G203570H.fits[3]
ft930414_0420_0239G203670H.fits[3]
ft930414_0420_0239G203770H.fits[3]
ft930414_0420_0239G203870M.fits[3]
ft930414_0420_0239G204070M.fits[3]
ft930414_0420_0239G204170H.fits[3]
ft930414_0420_0239G204270H.fits[3]
ft930414_0420_0239G204370H.fits[3]
ft930414_0420_0239G204470H.fits[3]
ft930414_0420_0239G204570M.fits[3]
ft930414_0420_0239G204670M.fits[3]
ft930414_0420_0239G204770H.fits[3]
ft930414_0420_0239G204870H.fits[3]
ft930414_0420_0239G204970H.fits[3]
ft930414_0420_0239G205070H.fits[3]
ft930414_0420_0239G205470M.fits[3]
ft930414_0420_0239G205570M.fits[3]
ft930414_0420_0239G205770M.fits[3]
ft930414_0420_0239G205870M.fits[3]
ft930414_0420_0239G206270H.fits[3]
ft930414_0420_0239G206370M.fits[3]
ft930414_0420_0239G206470M.fits[3]
ft930414_0420_0239G206570M.fits[3]
ft930414_0420_0239G206770M.fits[3]
ft930414_0420_0239G206870M.fits[3]
ft930414_0420_0239G206970M.fits[3]
ft930414_0420_0239G207270M.fits[3]
ft930414_0420_0239G207370H.fits[3]
ft930414_0420_0239G207470H.fits[3]
ft930414_0420_0239G207670H.fits[3]
ft930414_0420_0239G207870H.fits[3]
ft930414_0420_0239G208270M.fits[3]
ft930414_0420_0239G208370M.fits[3]
ft930414_0420_0239G208470H.fits[3]
ft930414_0420_0239G208570H.fits[3]
ft930414_0420_0239G208670H.fits[3]
ft930414_0420_0239G208770H.fits[3]
ft930414_0420_0239G208970H.fits[3]
ft930414_0420_0239G209070H.fits[3]
ft930414_0420_0239G209470M.fits[3]
ft930414_0420_0239G209570M.fits[3]
ft930414_0420_0239G209670H.fits[3]
ft930414_0420_0239G209770H.fits[3]
ft930414_0420_0239G209870H.fits[3]
ft930414_0420_0239G209970H.fits[3]
ft930414_0420_0239G210170H.fits[3]
ft930414_0420_0239G210270H.fits[3]
ft930414_0420_0239G210370H.fits[3]
ft930414_0420_0239G210470H.fits[3]
ft930414_0420_0239G210970H.fits[3]
ft930414_0420_0239G211070H.fits[3]
ft930414_0420_0239G211170H.fits[3]
ft930414_0420_0239G211270H.fits[3]
ft930414_0420_0239G211470H.fits[3]
ft930414_0420_0239G211570H.fits[3]
ft930414_0420_0239G211970M.fits[3]
ft930414_0420_0239G212070M.fits[3]
ft930414_0420_0239G212170H.fits[3]
ft930414_0420_0239G212270H.fits[3]
ft930414_0420_0239G212370H.fits[3]
ft930414_0420_0239G212470H.fits[3]
ft930414_0420_0239G212670H.fits[3]

ft930414_0420_0239G300170H.fits[3]
ft930414_0420_0239G300670M.fits[3]
ft930414_0420_0239G300770M.fits[3]
ft930414_0420_0239G300870H.fits[3]
ft930414_0420_0239G300970H.fits[3]
ft930414_0420_0239G301070H.fits[3]
ft930414_0420_0239G301170H.fits[3]
ft930414_0420_0239G301270H.fits[3]
ft930414_0420_0239G301370H.fits[3]
ft930414_0420_0239G301470H.fits[3]
ft930414_0420_0239G301570H.fits[3]
ft930414_0420_0239G301670M.fits[3]
ft930414_0420_0239G301770M.fits[3]
ft930414_0420_0239G301970M.fits[3]
ft930414_0420_0239G302070H.fits[3]
ft930414_0420_0239G302170H.fits[3]
ft930414_0420_0239G302270H.fits[3]
ft930414_0420_0239G302370H.fits[3]
ft930414_0420_0239G302470H.fits[3]
ft930414_0420_0239G302570H.fits[3]
ft930414_0420_0239G302670H.fits[3]
ft930414_0420_0239G302770H.fits[3]
ft930414_0420_0239G302870H.fits[3]
ft930414_0420_0239G302970H.fits[3]
ft930414_0420_0239G303070H.fits[3]
ft930414_0420_0239G303170H.fits[3]
ft930414_0420_0239G303270H.fits[3]
ft930414_0420_0239G303370H.fits[3]
ft930414_0420_0239G303470M.fits[3]
ft930414_0420_0239G303570M.fits[3]
ft930414_0420_0239G303670M.fits[3]
ft930414_0420_0239G303770M.fits[3]
ft930414_0420_0239G303870H.fits[3]
ft930414_0420_0239G303970H.fits[3]
ft930414_0420_0239G304070H.fits[3]
ft930414_0420_0239G304170H.fits[3]
ft930414_0420_0239G304270H.fits[3]
ft930414_0420_0239G304370H.fits[3]
ft930414_0420_0239G304470H.fits[3]
ft930414_0420_0239G304570H.fits[3]
ft930414_0420_0239G304670H.fits[3]
ft930414_0420_0239G304770H.fits[3]
ft930414_0420_0239G304870H.fits[3]
ft930414_0420_0239G304970H.fits[3]
ft930414_0420_0239G305070H.fits[3]
ft930414_0420_0239G305170H.fits[3]
ft930414_0420_0239G305270H.fits[3]
ft930414_0420_0239G305370H.fits[3]
ft930414_0420_0239G305470H.fits[3]
ft930414_0420_0239G305570H.fits[3]
ft930414_0420_0239G305670H.fits[3]
ft930414_0420_0239G305770H.fits[3]
ft930414_0420_0239G305870H.fits[3]
ft930414_0420_0239G305970H.fits[3]
ft930414_0420_0239G306070H.fits[3]
ft930414_0420_0239G306170H.fits[3]
ft930414_0420_0239G306270H.fits[3]
ft930414_0420_0239G306370H.fits[3]
ft930414_0420_0239G306470H.fits[3]
ft930414_0420_0239G306570H.fits[3]
ft930414_0420_0239G306670H.fits[3]
ft930414_0420_0239G306770H.fits[3]
ft930414_0420_0239G306870H.fits[3]
ft930414_0420_0239G306970H.fits[3]
ft930414_0420_0239G307070H.fits[3]
ft930414_0420_0239G307170H.fits[3]
ft930414_0420_0239G307270H.fits[3]
ft930414_0420_0239G307470H.fits[3]
ft930414_0420_0239G307570H.fits[3]
ft930414_0420_0239G307670H.fits[3]
ft930414_0420_0239G307770H.fits[3]
ft930414_0420_0239G307870H.fits[3]
ft930414_0420_0239G307970M.fits[3]
ft930414_0420_0239G308170M.fits[3]
ft930414_0420_0239G308270M.fits[3]
ft930414_0420_0239G308370M.fits[3]
ft930414_0420_0239G308470H.fits[3]
ft930414_0420_0239G308570H.fits[3]
ft930414_0420_0239G308670H.fits[3]
ft930414_0420_0239G308770H.fits[3]
ft930414_0420_0239G308870M.fits[3]
ft930414_0420_0239G308970M.fits[3]
ft930414_0420_0239G309070H.fits[3]
ft930414_0420_0239G309170H.fits[3]
ft930414_0420_0239G309270H.fits[3]
ft930414_0420_0239G309370H.fits[3]
ft930414_0420_0239G309770M.fits[3]
ft930414_0420_0239G309870M.fits[3]
ft930414_0420_0239G310070M.fits[3]
ft930414_0420_0239G310170M.fits[3]
ft930414_0420_0239G310570H.fits[3]
ft930414_0420_0239G310670M.fits[3]
ft930414_0420_0239G310770M.fits[3]
ft930414_0420_0239G310870M.fits[3]
ft930414_0420_0239G311070M.fits[3]
ft930414_0420_0239G311170M.fits[3]
ft930414_0420_0239G311270M.fits[3]
ft930414_0420_0239G311570M.fits[3]
ft930414_0420_0239G311670H.fits[3]
ft930414_0420_0239G311770H.fits[3]
ft930414_0420_0239G311970H.fits[3]
ft930414_0420_0239G312170H.fits[3]
ft930414_0420_0239G312670M.fits[3]
ft930414_0420_0239G312770M.fits[3]
ft930414_0420_0239G312870H.fits[3]
ft930414_0420_0239G312970H.fits[3]
ft930414_0420_0239G313070H.fits[3]
ft930414_0420_0239G313170H.fits[3]
ft930414_0420_0239G313370H.fits[3]
ft930414_0420_0239G313470H.fits[3]
ft930414_0420_0239G313870M.fits[3]
ft930414_0420_0239G313970M.fits[3]
ft930414_0420_0239G314070H.fits[3]
ft930414_0420_0239G314170H.fits[3]
ft930414_0420_0239G314370H.fits[3]
ft930414_0420_0239G314570H.fits[3]
ft930414_0420_0239G314670H.fits[3]
ft930414_0420_0239G314770H.fits[3]
ft930414_0420_0239G314870H.fits[3]
ft930414_0420_0239G315370H.fits[3]
ft930414_0420_0239G315470H.fits[3]
ft930414_0420_0239G315570H.fits[3]
ft930414_0420_0239G315670H.fits[3]
ft930414_0420_0239G315870H.fits[3]
ft930414_0420_0239G315970H.fits[3]
ft930414_0420_0239G316370M.fits[3]
ft930414_0420_0239G316470M.fits[3]
ft930414_0420_0239G316570H.fits[3]
ft930414_0420_0239G316670H.fits[3]
ft930414_0420_0239G316770H.fits[3]
ft930414_0420_0239G316870H.fits[3]
ft930414_0420_0239G317070H.fits[3]

Merging event files from frfread ( 18:47:43 )

GISSORTCODE:LO:Start program
GISSORTCODE:LO:End program

GISSORTSPLIT:LO:Start program
GISSORTSPLIT:LO:g200170h.prelist merge count = 3 photon cnt = 23
GISSORTSPLIT:LO:g200270h.prelist merge count = 1 photon cnt = 20
GISSORTSPLIT:LO:g200370h.prelist merge count = 1 photon cnt = 28
GISSORTSPLIT:LO:g200470h.prelist merge count = 26 photon cnt = 160068
GISSORTSPLIT:LO:g200570h.prelist merge count = 1 photon cnt = 35
GISSORTSPLIT:LO:g200670h.prelist merge count = 1 photon cnt = 4
GISSORTSPLIT:LO:g200770h.prelist merge count = 1 photon cnt = 39
GISSORTSPLIT:LO:g200870h.prelist merge count = 1 photon cnt = 9
GISSORTSPLIT:LO:g200970h.prelist merge count = 9 photon cnt = 93
GISSORTSPLIT:LO:g201070h.prelist merge count = 1 photon cnt = 8
GISSORTSPLIT:LO:g201170h.prelist merge count = 1 photon cnt = 5
GISSORTSPLIT:LO:g201270h.prelist merge count = 1 photon cnt = 10
GISSORTSPLIT:LO:g201370h.prelist merge count = 1 photon cnt = 21
GISSORTSPLIT:LO:g201470h.prelist merge count = 1 photon cnt = 18
GISSORTSPLIT:LO:g201570h.prelist merge count = 1 photon cnt = 10
GISSORTSPLIT:LO:g201670h.prelist merge count = 1 photon cnt = 3
GISSORTSPLIT:LO:g201770h.prelist merge count = 1 photon cnt = 6
GISSORTSPLIT:LO:g201870h.prelist merge count = 1 photon cnt = 19
GISSORTSPLIT:LO:g201970h.prelist merge count = 1 photon cnt = 21
GISSORTSPLIT:LO:g202070h.prelist merge count = 1 photon cnt = 1
GISSORTSPLIT:LO:g202170h.prelist merge count = 1 photon cnt = 2
GISSORTSPLIT:LO:g202270h.prelist merge count = 1 photon cnt = 5
GISSORTSPLIT:LO:g202370h.prelist merge count = 1 photon cnt = 6
GISSORTSPLIT:LO:g202470h.prelist merge count = 1 photon cnt = 11
GISSORTSPLIT:LO:g202570h.prelist merge count = 1 photon cnt = 18
GISSORTSPLIT:LO:g202670h.prelist merge count = 1 photon cnt = 13
GISSORTSPLIT:LO:g202770h.prelist merge count = 1 photon cnt = 20
GISSORTSPLIT:LO:g202870h.prelist merge count = 1 photon cnt = 6
GISSORTSPLIT:LO:g202970h.prelist merge count = 1 photon cnt = 8
GISSORTSPLIT:LO:g203070h.prelist merge count = 1 photon cnt = 5
GISSORTSPLIT:LO:g200170m.prelist merge count = 3 photon cnt = 67
GISSORTSPLIT:LO:g200270m.prelist merge count = 5 photon cnt = 211
GISSORTSPLIT:LO:g200370m.prelist merge count = 1 photon cnt = 37
GISSORTSPLIT:LO:g200470m.prelist merge count = 13 photon cnt = 143441
GISSORTSPLIT:LO:g200570m.prelist merge count = 5 photon cnt = 858
GISSORTSPLIT:LO:Total filenames split = 92
GISSORTSPLIT:LO:Total split file cnt = 35
GISSORTSPLIT:LO:End program

---- cmerge:  version 1.5 ----

A total of  26  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930414_0420_0239G200170H.fits 
 2 -- ft930414_0420_0239G201170H.fits 
 3 -- ft930414_0420_0239G201370H.fits 
 4 -- ft930414_0420_0239G201970H.fits 
 5 -- ft930414_0420_0239G202170H.fits 
 6 -- ft930414_0420_0239G202770H.fits 
 7 -- ft930414_0420_0239G202970H.fits 
 8 -- ft930414_0420_0239G203170H.fits 
 9 -- ft930414_0420_0239G203370H.fits 
 10 -- ft930414_0420_0239G203570H.fits 
 11 -- ft930414_0420_0239G203770H.fits 
 12 -- ft930414_0420_0239G204470H.fits 
 13 -- ft930414_0420_0239G205070H.fits 
 14 -- ft930414_0420_0239G206270H.fits 
 15 -- ft930414_0420_0239G207470H.fits 
 16 -- ft930414_0420_0239G207670H.fits 
 17 -- ft930414_0420_0239G207870H.fits 
 18 -- ft930414_0420_0239G208770H.fits 
 19 -- ft930414_0420_0239G208970H.fits 
 20 -- ft930414_0420_0239G209970H.fits 
 21 -- ft930414_0420_0239G210170H.fits 
 22 -- ft930414_0420_0239G210370H.fits 
 23 -- ft930414_0420_0239G211270H.fits 
 24 -- ft930414_0420_0239G211470H.fits 
 25 -- ft930414_0420_0239G212470H.fits 
 26 -- ft930414_0420_0239G212670H.fits 
Merging binary extension #: 2 
 1 -- ft930414_0420_0239G200170H.fits 
 2 -- ft930414_0420_0239G201170H.fits 
 3 -- ft930414_0420_0239G201370H.fits 
 4 -- ft930414_0420_0239G201970H.fits 
 5 -- ft930414_0420_0239G202170H.fits 
 6 -- ft930414_0420_0239G202770H.fits 
 7 -- ft930414_0420_0239G202970H.fits 
 8 -- ft930414_0420_0239G203170H.fits 
 9 -- ft930414_0420_0239G203370H.fits 
 10 -- ft930414_0420_0239G203570H.fits 
 11 -- ft930414_0420_0239G203770H.fits 
 12 -- ft930414_0420_0239G204470H.fits 
 13 -- ft930414_0420_0239G205070H.fits 
 14 -- ft930414_0420_0239G206270H.fits 
 15 -- ft930414_0420_0239G207470H.fits 
 16 -- ft930414_0420_0239G207670H.fits 
 17 -- ft930414_0420_0239G207870H.fits 
 18 -- ft930414_0420_0239G208770H.fits 
 19 -- ft930414_0420_0239G208970H.fits 
 20 -- ft930414_0420_0239G209970H.fits 
 21 -- ft930414_0420_0239G210170H.fits 
 22 -- ft930414_0420_0239G210370H.fits 
 23 -- ft930414_0420_0239G211270H.fits 
 24 -- ft930414_0420_0239G211470H.fits 
 25 -- ft930414_0420_0239G212470H.fits 
 26 -- ft930414_0420_0239G212670H.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully! 

---- cmerge:  version 1.5 ----

A total of  13  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930414_0420_0239G200770M.fits 
 2 -- ft930414_0420_0239G201570M.fits 
 3 -- ft930414_0420_0239G202370M.fits 
 4 -- ft930414_0420_0239G204070M.fits 
 5 -- ft930414_0420_0239G204670M.fits 
 6 -- ft930414_0420_0239G205470M.fits 
 7 -- ft930414_0420_0239G205870M.fits 
 8 -- ft930414_0420_0239G206470M.fits 
 9 -- ft930414_0420_0239G206870M.fits 
 10 -- ft930414_0420_0239G207270M.fits 
 11 -- ft930414_0420_0239G208370M.fits 
 12 -- ft930414_0420_0239G209570M.fits 
 13 -- ft930414_0420_0239G212070M.fits 
Merging binary extension #: 2 
 1 -- ft930414_0420_0239G200770M.fits 
 2 -- ft930414_0420_0239G201570M.fits 
 3 -- ft930414_0420_0239G202370M.fits 
 4 -- ft930414_0420_0239G204070M.fits 
 5 -- ft930414_0420_0239G204670M.fits 
 6 -- ft930414_0420_0239G205470M.fits 
 7 -- ft930414_0420_0239G205870M.fits 
 8 -- ft930414_0420_0239G206470M.fits 
 9 -- ft930414_0420_0239G206870M.fits 
 10 -- ft930414_0420_0239G207270M.fits 
 11 -- ft930414_0420_0239G208370M.fits 
 12 -- ft930414_0420_0239G209570M.fits 
 13 -- ft930414_0420_0239G212070M.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully! 

---- cmerge:  version 1.5 ----

A total of  5  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930414_0420_0239G201470M.fits 
 2 -- ft930414_0420_0239G202270M.fits 
 3 -- ft930414_0420_0239G203870M.fits 
 4 -- ft930414_0420_0239G204570M.fits 
 5 -- ft930414_0420_0239G206370M.fits 
Merging binary extension #: 2 
 1 -- ft930414_0420_0239G201470M.fits 
 2 -- ft930414_0420_0239G202270M.fits 
 3 -- ft930414_0420_0239G203870M.fits 
 4 -- ft930414_0420_0239G204570M.fits 
 5 -- ft930414_0420_0239G206370M.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully! 

ft930414_0420_0239G200670M.fits
ft930414_0420_0239G205770M.fits
ft930414_0420_0239G206770M.fits
ft930414_0420_0239G208270M.fits
ft930414_0420_0239G209470M.fits

ft930414_0420_0239G201070H.fits
ft930414_0420_0239G201870H.fits
ft930414_0420_0239G202670H.fits
ft930414_0420_0239G204370H.fits
ft930414_0420_0239G204970H.fits
ft930414_0420_0239G208670H.fits
ft930414_0420_0239G209870H.fits
ft930414_0420_0239G211170H.fits
ft930414_0420_0239G212370H.fits

ft930414_0420_0239G205570M.fits
ft930414_0420_0239G206570M.fits
ft930414_0420_0239G206970M.fits

ft930414_0420_0239G203070H.fits

ft930414_0420_0239G211970M.fits

ft930414_0420_0239G210270H.fits

ft930414_0420_0239G202870H.fits

ft930414_0420_0239G209070H.fits
ft930414_0420_0239G210470H.fits
ft930414_0420_0239G211570H.fits

ft930414_0420_0239G202570H.fits

ft930414_0420_0239G204870H.fits

ft930414_0420_0239G201770H.fits

ft930414_0420_0239G202070H.fits

ft930414_0420_0239G202470H.fits

ft930414_0420_0239G200970H.fits

ft930414_0420_0239G204170H.fits

ft930414_0420_0239G201670H.fits

ft930414_0420_0239G200870H.fits

ft930414_0420_0239G204270H.fits

ft930414_0420_0239G204770H.fits

ft930414_0420_0239G203270H.fits

ft930414_0420_0239G201270H.fits

ft930414_0420_0239G210970H.fits

ft930414_0420_0239G203470H.fits

ft930414_0420_0239G209770H.fits

ft930414_0420_0239G212270H.fits

ft930414_0420_0239G207370H.fits

ft930414_0420_0239G209670H.fits

ft930414_0420_0239G211070H.fits

ft930414_0420_0239G203670H.fits

ft930414_0420_0239G212170H.fits

ft930414_0420_0239G208570H.fits

ft930414_0420_0239G208470H.fits

GISSORTCODE:LO:Start program
GISSORTCODE:LO:End program

GISSORTSPLIT:LO:Start program
GISSORTSPLIT:LO:g300170h.prelist merge count = 3 photon cnt = 23
GISSORTSPLIT:LO:g300270h.prelist merge count = 1 photon cnt = 22
GISSORTSPLIT:LO:g300370h.prelist merge count = 1 photon cnt = 13
GISSORTSPLIT:LO:g300470h.prelist merge count = 3 photon cnt = 24
GISSORTSPLIT:LO:g300570h.prelist merge count = 1 photon cnt = 32
GISSORTSPLIT:LO:g300670h.prelist merge count = 1 photon cnt = 40
GISSORTSPLIT:LO:g300770h.prelist merge count = 2 photon cnt = 40
GISSORTSPLIT:LO:g300870h.prelist merge count = 1 photon cnt = 14
GISSORTSPLIT:LO:g300970h.prelist merge count = 1 photon cnt = 30
GISSORTSPLIT:LO:g301070h.prelist merge count = 44 photon cnt = 158395
GISSORTSPLIT:LO:g301170h.prelist merge count = 1 photon cnt = 35
GISSORTSPLIT:LO:g301270h.prelist merge count = 1 photon cnt = 29
GISSORTSPLIT:LO:g301370h.prelist merge count = 1 photon cnt = 46
GISSORTSPLIT:LO:g301470h.prelist merge count = 1 photon cnt = 36
GISSORTSPLIT:LO:g301570h.prelist merge count = 1 photon cnt = 9
GISSORTSPLIT:LO:g301670h.prelist merge count = 1 photon cnt = 13
GISSORTSPLIT:LO:g301770h.prelist merge count = 8 photon cnt = 93
GISSORTSPLIT:LO:g301870h.prelist merge count = 4 photon cnt = 82
GISSORTSPLIT:LO:g301970h.prelist merge count = 1 photon cnt = 6
GISSORTSPLIT:LO:g302070h.prelist merge count = 1 photon cnt = 3
GISSORTSPLIT:LO:g302170h.prelist merge count = 1 photon cnt = 12
GISSORTSPLIT:LO:g302270h.prelist merge count = 1 photon cnt = 17
GISSORTSPLIT:LO:g302370h.prelist merge count = 1 photon cnt = 6
GISSORTSPLIT:LO:g302470h.prelist merge count = 1 photon cnt = 6
GISSORTSPLIT:LO:g302570h.prelist merge count = 1 photon cnt = 3
GISSORTSPLIT:LO:g302670h.prelist merge count = 1 photon cnt = 6
GISSORTSPLIT:LO:g302770h.prelist merge count = 1 photon cnt = 14
GISSORTSPLIT:LO:g302870h.prelist merge count = 1 photon cnt = 11
GISSORTSPLIT:LO:g302970h.prelist merge count = 1 photon cnt = 4
GISSORTSPLIT:LO:g303070h.prelist merge count = 1 photon cnt = 5
GISSORTSPLIT:LO:g303170h.prelist merge count = 1 photon cnt = 17
GISSORTSPLIT:LO:g303270h.prelist merge count = 1 photon cnt = 15
GISSORTSPLIT:LO:g303370h.prelist merge count = 1 photon cnt = 10
GISSORTSPLIT:LO:g303470h.prelist merge count = 1 photon cnt = 15
GISSORTSPLIT:LO:g303570h.prelist merge count = 1 photon cnt = 21
GISSORTSPLIT:LO:g303670h.prelist merge count = 1 photon cnt = 21
GISSORTSPLIT:LO:g303770h.prelist merge count = 1 photon cnt = 8
GISSORTSPLIT:LO:g303870h.prelist merge count = 2 photon cnt = 28
GISSORTSPLIT:LO:g303970h.prelist merge count = 1 photon cnt = 8
GISSORTSPLIT:LO:g304070h.prelist merge count = 1 photon cnt = 6
GISSORTSPLIT:LO:g304170h.prelist merge count = 1 photon cnt = 4
GISSORTSPLIT:LO:g300170m.prelist merge count = 3 photon cnt = 66
GISSORTSPLIT:LO:g300270m.prelist merge count = 6 photon cnt = 238
GISSORTSPLIT:LO:g300370m.prelist merge count = 1 photon cnt = 270
GISSORTSPLIT:LO:g300470m.prelist merge count = 16 photon cnt = 141619
GISSORTSPLIT:LO:g300570m.prelist merge count = 5 photon cnt = 796
GISSORTSPLIT:LO:g300670m.prelist merge count = 1 photon cnt = 54
GISSORTSPLIT:LO:Total filenames split = 132
GISSORTSPLIT:LO:Total split file cnt = 47
GISSORTSPLIT:LO:End program

---- cmerge:  version 1.5 ----

A total of  44  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930414_0420_0239G300170H.fits 
 2 -- ft930414_0420_0239G301170H.fits 
 3 -- ft930414_0420_0239G301370H.fits 
 4 -- ft930414_0420_0239G301570H.fits 
 5 -- ft930414_0420_0239G302370H.fits 
 6 -- ft930414_0420_0239G302570H.fits 
 7 -- ft930414_0420_0239G302770H.fits 
 8 -- ft930414_0420_0239G302970H.fits 
 9 -- ft930414_0420_0239G303170H.fits 
 10 -- ft930414_0420_0239G303370H.fits 
 11 -- ft930414_0420_0239G304170H.fits 
 12 -- ft930414_0420_0239G304370H.fits 
 13 -- ft930414_0420_0239G304570H.fits 
 14 -- ft930414_0420_0239G304770H.fits 
 15 -- ft930414_0420_0239G304970H.fits 
 16 -- ft930414_0420_0239G305170H.fits 
 17 -- ft930414_0420_0239G305370H.fits 
 18 -- ft930414_0420_0239G305570H.fits 
 19 -- ft930414_0420_0239G305770H.fits 
 20 -- ft930414_0420_0239G305970H.fits 
 21 -- ft930414_0420_0239G306170H.fits 
 22 -- ft930414_0420_0239G306370H.fits 
 23 -- ft930414_0420_0239G306570H.fits 
 24 -- ft930414_0420_0239G306770H.fits 
 25 -- ft930414_0420_0239G306970H.fits 
 26 -- ft930414_0420_0239G307170H.fits 
 27 -- ft930414_0420_0239G307470H.fits 
 28 -- ft930414_0420_0239G307670H.fits 
 29 -- ft930414_0420_0239G307870H.fits 
 30 -- ft930414_0420_0239G308770H.fits 
 31 -- ft930414_0420_0239G309370H.fits 
 32 -- ft930414_0420_0239G310570H.fits 
 33 -- ft930414_0420_0239G311770H.fits 
 34 -- ft930414_0420_0239G311970H.fits 
 35 -- ft930414_0420_0239G312170H.fits 
 36 -- ft930414_0420_0239G313170H.fits 
 37 -- ft930414_0420_0239G313370H.fits 
 38 -- ft930414_0420_0239G314370H.fits 
 39 -- ft930414_0420_0239G314570H.fits 
 40 -- ft930414_0420_0239G314770H.fits 
 41 -- ft930414_0420_0239G315670H.fits 
 42 -- ft930414_0420_0239G315870H.fits 
 43 -- ft930414_0420_0239G316870H.fits 
 44 -- ft930414_0420_0239G317070H.fits 
Merging binary extension #: 2 
 1 -- ft930414_0420_0239G300170H.fits 
 2 -- ft930414_0420_0239G301170H.fits 
 3 -- ft930414_0420_0239G301370H.fits 
 4 -- ft930414_0420_0239G301570H.fits 
 5 -- ft930414_0420_0239G302370H.fits 
 6 -- ft930414_0420_0239G302570H.fits 
 7 -- ft930414_0420_0239G302770H.fits 
 8 -- ft930414_0420_0239G302970H.fits 
 9 -- ft930414_0420_0239G303170H.fits 
 10 -- ft930414_0420_0239G303370H.fits 
 11 -- ft930414_0420_0239G304170H.fits 
 12 -- ft930414_0420_0239G304370H.fits 
 13 -- ft930414_0420_0239G304570H.fits 
 14 -- ft930414_0420_0239G304770H.fits 
 15 -- ft930414_0420_0239G304970H.fits 
 16 -- ft930414_0420_0239G305170H.fits 
 17 -- ft930414_0420_0239G305370H.fits 
 18 -- ft930414_0420_0239G305570H.fits 
 19 -- ft930414_0420_0239G305770H.fits 
 20 -- ft930414_0420_0239G305970H.fits 
 21 -- ft930414_0420_0239G306170H.fits 
 22 -- ft930414_0420_0239G306370H.fits 
 23 -- ft930414_0420_0239G306570H.fits 
 24 -- ft930414_0420_0239G306770H.fits 
 25 -- ft930414_0420_0239G306970H.fits 
 26 -- ft930414_0420_0239G307170H.fits 
 27 -- ft930414_0420_0239G307470H.fits 
 28 -- ft930414_0420_0239G307670H.fits 
 29 -- ft930414_0420_0239G307870H.fits 
 30 -- ft930414_0420_0239G308770H.fits 
 31 -- ft930414_0420_0239G309370H.fits 
 32 -- ft930414_0420_0239G310570H.fits 
 33 -- ft930414_0420_0239G311770H.fits 
 34 -- ft930414_0420_0239G311970H.fits 
 35 -- ft930414_0420_0239G312170H.fits 
 36 -- ft930414_0420_0239G313170H.fits 
 37 -- ft930414_0420_0239G313370H.fits 
 38 -- ft930414_0420_0239G314370H.fits 
 39 -- ft930414_0420_0239G314570H.fits 
 40 -- ft930414_0420_0239G314770H.fits 
 41 -- ft930414_0420_0239G315670H.fits 
 42 -- ft930414_0420_0239G315870H.fits 
 43 -- ft930414_0420_0239G316870H.fits 
 44 -- ft930414_0420_0239G317070H.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully! 

---- cmerge:  version 1.5 ----

A total of  16  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930414_0420_0239G300770M.fits 
 2 -- ft930414_0420_0239G301770M.fits 
 3 -- ft930414_0420_0239G301970M.fits 
 4 -- ft930414_0420_0239G303570M.fits 
 5 -- ft930414_0420_0239G303770M.fits 
 6 -- ft930414_0420_0239G308170M.fits 
 7 -- ft930414_0420_0239G308370M.fits 
 8 -- ft930414_0420_0239G308970M.fits 
 9 -- ft930414_0420_0239G309770M.fits 
 10 -- ft930414_0420_0239G310170M.fits 
 11 -- ft930414_0420_0239G310770M.fits 
 12 -- ft930414_0420_0239G311170M.fits 
 13 -- ft930414_0420_0239G311570M.fits 
 14 -- ft930414_0420_0239G312770M.fits 
 15 -- ft930414_0420_0239G313970M.fits 
 16 -- ft930414_0420_0239G316470M.fits 
Merging binary extension #: 2 
 1 -- ft930414_0420_0239G300770M.fits 
 2 -- ft930414_0420_0239G301770M.fits 
 3 -- ft930414_0420_0239G301970M.fits 
 4 -- ft930414_0420_0239G303570M.fits 
 5 -- ft930414_0420_0239G303770M.fits 
 6 -- ft930414_0420_0239G308170M.fits 
 7 -- ft930414_0420_0239G308370M.fits 
 8 -- ft930414_0420_0239G308970M.fits 
 9 -- ft930414_0420_0239G309770M.fits 
 10 -- ft930414_0420_0239G310170M.fits 
 11 -- ft930414_0420_0239G310770M.fits 
 12 -- ft930414_0420_0239G311170M.fits 
 13 -- ft930414_0420_0239G311570M.fits 
 14 -- ft930414_0420_0239G312770M.fits 
 15 -- ft930414_0420_0239G313970M.fits 
 16 -- ft930414_0420_0239G316470M.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully! 

---- cmerge:  version 1.5 ----

A total of  5  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930414_0420_0239G301670M.fits 
 2 -- ft930414_0420_0239G303470M.fits 
 3 -- ft930414_0420_0239G307970M.fits 
 4 -- ft930414_0420_0239G308870M.fits 
 5 -- ft930414_0420_0239G310670M.fits 
Merging binary extension #: 2 
 1 -- ft930414_0420_0239G301670M.fits 
 2 -- ft930414_0420_0239G303470M.fits 
 3 -- ft930414_0420_0239G307970M.fits 
 4 -- ft930414_0420_0239G308870M.fits 
 5 -- ft930414_0420_0239G310670M.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully! 

ft930414_0420_0239G303670M.fits

ft930414_0420_0239G300670M.fits
ft930414_0420_0239G310070M.fits
ft930414_0420_0239G311070M.fits
ft930414_0420_0239G312670M.fits
ft930414_0420_0239G313870M.fits
ft930414_0420_0239G316370M.fits

ft930414_0420_0239G301070H.fits
ft930414_0420_0239G302270H.fits
ft930414_0420_0239G304070H.fits
ft930414_0420_0239G308670H.fits
ft930414_0420_0239G309270H.fits
ft930414_0420_0239G313070H.fits
ft930414_0420_0239G315570H.fits
ft930414_0420_0239G316770H.fits

ft930414_0420_0239G304670H.fits
ft930414_0420_0239G305470H.fits
ft930414_0420_0239G306270H.fits
ft930414_0420_0239G306670H.fits

ft930414_0420_0239G309870M.fits
ft930414_0420_0239G310870M.fits
ft930414_0420_0239G311270M.fits

ft930414_0420_0239G308270M.fits

ft930414_0420_0239G314670H.fits

ft930414_0420_0239G305870H.fits
ft930414_0420_0239G307570H.fits

ft930414_0420_0239G305270H.fits

ft930414_0420_0239G306070H.fits

ft930414_0420_0239G303270H.fits

ft930414_0420_0239G304270H.fits

ft930414_0420_0239G302670H.fits

ft930414_0420_0239G302470H.fits

ft930414_0420_0239G304470H.fits
ft930414_0420_0239G304870H.fits

ft930414_0420_0239G302870H.fits
ft930414_0420_0239G305070H.fits
ft930414_0420_0239G306470H.fits

ft930414_0420_0239G313470H.fits
ft930414_0420_0239G314870H.fits
ft930414_0420_0239G315970H.fits

ft930414_0420_0239G303070H.fits

ft930414_0420_0239G308570H.fits

ft930414_0420_0239G308470H.fits

ft930414_0420_0239G303870H.fits

ft930414_0420_0239G309170H.fits

ft930414_0420_0239G302170H.fits

ft930414_0420_0239G303970H.fits

ft930414_0420_0239G300870H.fits

ft930414_0420_0239G306870H.fits

ft930414_0420_0239G307770H.fits

ft930414_0420_0239G305670H.fits

ft930414_0420_0239G309070H.fits

ft930414_0420_0239G300970H.fits

ft930414_0420_0239G302070H.fits

ft930414_0420_0239G311670H.fits

ft930414_0420_0239G301470H.fits

ft930414_0420_0239G301270H.fits

ft930414_0420_0239G307070H.fits

ft930414_0420_0239G314170H.fits

ft930414_0420_0239G315470H.fits

ft930414_0420_0239G315370H.fits

ft930414_0420_0239G312870H.fits

ft930414_0420_0239G316670H.fits

ft930414_0420_0239G307270H.fits

ft930414_0420_0239G316570H.fits

ft930414_0420_0239G314070H.fits

ft930414_0420_0239G312970H.fits

SIS0SORTCODE:LO:Start program
SIS0SORTCODE:LO:End program

SIS0SORTSPLIT:LO:Start program
SIS0SORTSPLIT:LO:s000101h.prelist merge count = 1 photon cnt = 153
SIS0SORTSPLIT:LO:s000201h.prelist merge count = 2 photon cnt = 350
SIS0SORTSPLIT:LO:s000301h.prelist merge count = 1 photon cnt = 27
SIS0SORTSPLIT:LO:s000401h.prelist merge count = 1 photon cnt = 335
SIS0SORTSPLIT:LO:s000501h.prelist merge count = 33 photon cnt = 703957
SIS0SORTSPLIT:LO:s000601h.prelist merge count = 2 photon cnt = 862
SIS0SORTSPLIT:LO:s000701h.prelist merge count = 1 photon cnt = 512
SIS0SORTSPLIT:LO:s000801h.prelist merge count = 1 photon cnt = 114
SIS0SORTSPLIT:LO:s000901h.prelist merge count = 1 photon cnt = 203
SIS0SORTSPLIT:LO:s001001h.prelist merge count = 1 photon cnt = 63
SIS0SORTSPLIT:LO:s001101h.prelist merge count = 3 photon cnt = 460
SIS0SORTSPLIT:LO:s001201h.prelist merge count = 1 photon cnt = 2834
SIS0SORTSPLIT:LO:s001301h.prelist merge count = 1 photon cnt = 120
SIS0SORTSPLIT:LO:s001401h.prelist merge count = 1 photon cnt = 512
SIS0SORTSPLIT:LO:s001501h.prelist merge count = 1 photon cnt = 100
SIS0SORTSPLIT:LO:s001601h.prelist merge count = 1 photon cnt = 512
SIS0SORTSPLIT:LO:s001701h.prelist merge count = 1 photon cnt = 253
SIS0SORTSPLIT:LO:s001801h.prelist merge count = 1 photon cnt = 256
SIS0SORTSPLIT:LO:s001902h.prelist merge count = 5 photon cnt = 25174
SIS0SORTSPLIT:LO:s002002h.prelist merge count = 1 photon cnt = 11
SIS0SORTSPLIT:LO:s002102h.prelist merge count = 1 photon cnt = 71
SIS0SORTSPLIT:LO:s002202m.prelist merge count = 23 photon cnt = 293699
SIS0SORTSPLIT:LO:s002302m.prelist merge count = 1 photon cnt = 392
SIS0SORTSPLIT:LO:s002402m.prelist merge count = 1 photon cnt = 926
SIS0SORTSPLIT:LO:s002502m.prelist merge count = 6 photon cnt = 178
SIS0SORTSPLIT:LO:Total filenames split = 92
SIS0SORTSPLIT:LO:Total split file cnt = 25
SIS0SORTSPLIT:LO:End program

---- cmerge:  version 1.5 ----

A total of  33  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930414_0420_0239S000601H.fits 
 2 -- ft930414_0420_0239S001201H.fits 
 3 -- ft930414_0420_0239S001401H.fits 
 4 -- ft930414_0420_0239S001601H.fits 
 5 -- ft930414_0420_0239S002101H.fits 
 6 -- ft930414_0420_0239S002301H.fits 
 7 -- ft930414_0420_0239S002501H.fits 
 8 -- ft930414_0420_0239S002701H.fits 
 9 -- ft930414_0420_0239S003001H.fits 
 10 -- ft930414_0420_0239S003201H.fits 
 11 -- ft930414_0420_0239S003401H.fits 
 12 -- ft930414_0420_0239S003601H.fits 
 13 -- ft930414_0420_0239S003801H.fits 
 14 -- ft930414_0420_0239S004101H.fits 
 15 -- ft930414_0420_0239S004301H.fits 
 16 -- ft930414_0420_0239S004501H.fits 
 17 -- ft930414_0420_0239S004701H.fits 
 18 -- ft930414_0420_0239S005001H.fits 
 19 -- ft930414_0420_0239S005201H.fits 
 20 -- ft930414_0420_0239S005601H.fits 
 21 -- ft930414_0420_0239S006101H.fits 
 22 -- ft930414_0420_0239S006301H.fits 
 23 -- ft930414_0420_0239S007301H.fits 
 24 -- ft930414_0420_0239S008801H.fits 
 25 -- ft930414_0420_0239S009301H.fits 
 26 -- ft930414_0420_0239S009501H.fits 
 27 -- ft930414_0420_0239S010001H.fits 
 28 -- ft930414_0420_0239S010201H.fits 
 29 -- ft930414_0420_0239S010401H.fits 
 30 -- ft930414_0420_0239S011001H.fits 
 31 -- ft930414_0420_0239S011201H.fits 
 32 -- ft930414_0420_0239S011801H.fits 
 33 -- ft930414_0420_0239S012001H.fits 
Merging binary extension #: 2 
 1 -- ft930414_0420_0239S000601H.fits 
 2 -- ft930414_0420_0239S001201H.fits 
 3 -- ft930414_0420_0239S001401H.fits 
 4 -- ft930414_0420_0239S001601H.fits 
 5 -- ft930414_0420_0239S002101H.fits 
 6 -- ft930414_0420_0239S002301H.fits 
 7 -- ft930414_0420_0239S002501H.fits 
 8 -- ft930414_0420_0239S002701H.fits 
 9 -- ft930414_0420_0239S003001H.fits 
 10 -- ft930414_0420_0239S003201H.fits 
 11 -- ft930414_0420_0239S003401H.fits 
 12 -- ft930414_0420_0239S003601H.fits 
 13 -- ft930414_0420_0239S003801H.fits 
 14 -- ft930414_0420_0239S004101H.fits 
 15 -- ft930414_0420_0239S004301H.fits 
 16 -- ft930414_0420_0239S004501H.fits 
 17 -- ft930414_0420_0239S004701H.fits 
 18 -- ft930414_0420_0239S005001H.fits 
 19 -- ft930414_0420_0239S005201H.fits 
 20 -- ft930414_0420_0239S005601H.fits 
 21 -- ft930414_0420_0239S006101H.fits 
 22 -- ft930414_0420_0239S006301H.fits 
 23 -- ft930414_0420_0239S007301H.fits 
 24 -- ft930414_0420_0239S008801H.fits 
 25 -- ft930414_0420_0239S009301H.fits 
 26 -- ft930414_0420_0239S009501H.fits 
 27 -- ft930414_0420_0239S010001H.fits 
 28 -- ft930414_0420_0239S010201H.fits 
 29 -- ft930414_0420_0239S010401H.fits 
 30 -- ft930414_0420_0239S011001H.fits 
 31 -- ft930414_0420_0239S011201H.fits 
 32 -- ft930414_0420_0239S011801H.fits 
 33 -- ft930414_0420_0239S012001H.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully! 

---- cmerge:  version 1.5 ----

A total of  23  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930414_0420_0239S000402M.fits 
 2 -- ft930414_0420_0239S000702M.fits 
 3 -- ft930414_0420_0239S000902M.fits 
 4 -- ft930414_0420_0239S001102M.fits 
 5 -- ft930414_0420_0239S001702M.fits 
 6 -- ft930414_0420_0239S001902M.fits 
 7 -- ft930414_0420_0239S005302M.fits 
 8 -- ft930414_0420_0239S005502M.fits 
 9 -- ft930414_0420_0239S005702M.fits 
 10 -- ft930414_0420_0239S005902M.fits 
 11 -- ft930414_0420_0239S006702M.fits 
 12 -- ft930414_0420_0239S006902M.fits 
 13 -- ft930414_0420_0239S007402M.fits 
 14 -- ft930414_0420_0239S007602M.fits 
 15 -- ft930414_0420_0239S007802M.fits 
 16 -- ft930414_0420_0239S008102M.fits 
 17 -- ft930414_0420_0239S009002M.fits 
 18 -- ft930414_0420_0239S009202M.fits 
 19 -- ft930414_0420_0239S009702M.fits 
 20 -- ft930414_0420_0239S009902M.fits 
 21 -- ft930414_0420_0239S010602M.fits 
 22 -- ft930414_0420_0239S011402M.fits 
 23 -- ft930414_0420_0239S011602M.fits 
Merging binary extension #: 2 
 1 -- ft930414_0420_0239S000402M.fits 
 2 -- ft930414_0420_0239S000702M.fits 
 3 -- ft930414_0420_0239S000902M.fits 
 4 -- ft930414_0420_0239S001102M.fits 
 5 -- ft930414_0420_0239S001702M.fits 
 6 -- ft930414_0420_0239S001902M.fits 
 7 -- ft930414_0420_0239S005302M.fits 
 8 -- ft930414_0420_0239S005502M.fits 
 9 -- ft930414_0420_0239S005702M.fits 
 10 -- ft930414_0420_0239S005902M.fits 
 11 -- ft930414_0420_0239S006702M.fits 
 12 -- ft930414_0420_0239S006902M.fits 
 13 -- ft930414_0420_0239S007402M.fits 
 14 -- ft930414_0420_0239S007602M.fits 
 15 -- ft930414_0420_0239S007802M.fits 
 16 -- ft930414_0420_0239S008102M.fits 
 17 -- ft930414_0420_0239S009002M.fits 
 18 -- ft930414_0420_0239S009202M.fits 
 19 -- ft930414_0420_0239S009702M.fits 
 20 -- ft930414_0420_0239S009902M.fits 
 21 -- ft930414_0420_0239S010602M.fits 
 22 -- ft930414_0420_0239S011402M.fits 
 23 -- ft930414_0420_0239S011602M.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully! 

---- cmerge:  version 1.5 ----

A total of  5  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930414_0420_0239S000102H.fits 
 2 -- ft930414_0420_0239S008302H.fits 
 3 -- ft930414_0420_0239S008502H.fits 
 4 -- ft930414_0420_0239S008702H.fits 
 5 -- ft930414_0420_0239S010902H.fits 
Merging binary extension #: 2 
 1 -- ft930414_0420_0239S000102H.fits 
 2 -- ft930414_0420_0239S008302H.fits 
 3 -- ft930414_0420_0239S008502H.fits 
 4 -- ft930414_0420_0239S008702H.fits 
 5 -- ft930414_0420_0239S010902H.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully! 

---- cmerge:  version 1.5 ----

A total of  1  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930414_0420_0239S004001H.fits 
Merging binary extension #: 2 
 1 -- ft930414_0420_0239S004001H.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully! 

ft930414_0420_0239S001802M.fits

ft930414_0420_0239S003301H.fits
ft930414_0420_0239S004801H.fits

ft930414_0420_0239S005101H.fits

ft930414_0420_0239S010301H.fits

ft930414_0420_0239S004901H.fits

ft930414_0420_0239S002601H.fits
ft930414_0420_0239S002801H.fits
ft930414_0420_0239S003501H.fits

ft930414_0420_0239S001002M.fits

ft930414_0420_0239S002901H.fits
ft930414_0420_0239S004601H.fits

ft930414_0420_0239S001301H.fits

ft930414_0420_0239S006201H.fits

ft930414_0420_0239S001501H.fits

ft930414_0420_0239S002201H.fits

ft930414_0420_0239S000802M.fits
ft930414_0420_0239S007502M.fits
ft930414_0420_0239S007702M.fits
ft930414_0420_0239S007902M.fits
ft930414_0420_0239S009102M.fits
ft930414_0420_0239S011502M.fits

ft930414_0420_0239S003101H.fits

ft930414_0420_0239S002401H.fits

ft930414_0420_0239S003901H.fits

ft930414_0420_0239S003701H.fits

ft930414_0420_0239S000202H.fits

ft930414_0420_0239S004401H.fits

ft930414_0420_0239S004201H.fits

ft930414_0420_0239S008202H.fits

SIS1SORTCODE:LO:Start program
SIS1SORTCODE:LO:End program

SIS1SORTSPLIT:LO:Start program
SIS1SORTSPLIT:LO:s100101h.prelist merge count = 1 photon cnt = 72
SIS1SORTSPLIT:LO:s100201h.prelist merge count = 2 photon cnt = 2939
SIS1SORTSPLIT:LO:s100301h.prelist merge count = 1 photon cnt = 61
SIS1SORTSPLIT:LO:s100401h.prelist merge count = 3 photon cnt = 456
SIS1SORTSPLIT:LO:s100501h.prelist merge count = 1 photon cnt = 79
SIS1SORTSPLIT:LO:s100601h.prelist merge count = 33 photon cnt = 579146
SIS1SORTSPLIT:LO:s100701h.prelist merge count = 2 photon cnt = 670
SIS1SORTSPLIT:LO:s100801h.prelist merge count = 1 photon cnt = 256
SIS1SORTSPLIT:LO:s100901h.prelist merge count = 1 photon cnt = 256
SIS1SORTSPLIT:LO:s101001h.prelist merge count = 1 photon cnt = 68
SIS1SORTSPLIT:LO:s101101h.prelist merge count = 1 photon cnt = 54
SIS1SORTSPLIT:LO:s101201h.prelist merge count = 1 photon cnt = 187
SIS1SORTSPLIT:LO:s101301h.prelist merge count = 1 photon cnt = 139
SIS1SORTSPLIT:LO:s101401h.prelist merge count = 1 photon cnt = 157
SIS1SORTSPLIT:LO:s101501h.prelist merge count = 1 photon cnt = 53
SIS1SORTSPLIT:LO:s101601h.prelist merge count = 1 photon cnt = 510
SIS1SORTSPLIT:LO:s101701h.prelist merge count = 1 photon cnt = 67
SIS1SORTSPLIT:LO:s101801h.prelist merge count = 1 photon cnt = 364
SIS1SORTSPLIT:LO:s101901h.prelist merge count = 1 photon cnt = 256
SIS1SORTSPLIT:LO:s102001m.prelist merge count = 2 photon cnt = 127
SIS1SORTSPLIT:LO:s102102h.prelist merge count = 7 photon cnt = 23965
SIS1SORTSPLIT:LO:s102202h.prelist merge count = 1 photon cnt = 51
SIS1SORTSPLIT:LO:s102302h.prelist merge count = 1 photon cnt = 80
SIS1SORTSPLIT:LO:s102402m.prelist merge count = 23 photon cnt = 312611
SIS1SORTSPLIT:LO:s102502m.prelist merge count = 1 photon cnt = 337
SIS1SORTSPLIT:LO:s102602m.prelist merge count = 1 photon cnt = 934
SIS1SORTSPLIT:LO:s102702m.prelist merge count = 6 photon cnt = 316
SIS1SORTSPLIT:LO:Total filenames split = 97
SIS1SORTSPLIT:LO:Total split file cnt = 27
SIS1SORTSPLIT:LO:End program

---- cmerge:  version 1.5 ----

A total of  33  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930414_0420_0239S100601H.fits 
 2 -- ft930414_0420_0239S101201H.fits 
 3 -- ft930414_0420_0239S101401H.fits 
 4 -- ft930414_0420_0239S101601H.fits 
 5 -- ft930414_0420_0239S102101H.fits 
 6 -- ft930414_0420_0239S102301H.fits 
 7 -- ft930414_0420_0239S102501H.fits 
 8 -- ft930414_0420_0239S102701H.fits 
 9 -- ft930414_0420_0239S102901H.fits 
 10 -- ft930414_0420_0239S103201H.fits 
 11 -- ft930414_0420_0239S103401H.fits 
 12 -- ft930414_0420_0239S103601H.fits 
 13 -- ft930414_0420_0239S103801H.fits 
 14 -- ft930414_0420_0239S104001H.fits 
 15 -- ft930414_0420_0239S104201H.fits 
 16 -- ft930414_0420_0239S104401H.fits 
 17 -- ft930414_0420_0239S104701H.fits 
 18 -- ft930414_0420_0239S105101H.fits 
 19 -- ft930414_0420_0239S105301H.fits 
 20 -- ft930414_0420_0239S105701H.fits 
 21 -- ft930414_0420_0239S106201H.fits 
 22 -- ft930414_0420_0239S106401H.fits 
 23 -- ft930414_0420_0239S107401H.fits 
 24 -- ft930414_0420_0239S108901H.fits 
 25 -- ft930414_0420_0239S109501H.fits 
 26 -- ft930414_0420_0239S109701H.fits 
 27 -- ft930414_0420_0239S110301H.fits 
 28 -- ft930414_0420_0239S110501H.fits 
 29 -- ft930414_0420_0239S110701H.fits 
 30 -- ft930414_0420_0239S111301H.fits 
 31 -- ft930414_0420_0239S111501H.fits 
 32 -- ft930414_0420_0239S112001H.fits 
 33 -- ft930414_0420_0239S112201H.fits 
Merging binary extension #: 2 
 1 -- ft930414_0420_0239S100601H.fits 
 2 -- ft930414_0420_0239S101201H.fits 
 3 -- ft930414_0420_0239S101401H.fits 
 4 -- ft930414_0420_0239S101601H.fits 
 5 -- ft930414_0420_0239S102101H.fits 
 6 -- ft930414_0420_0239S102301H.fits 
 7 -- ft930414_0420_0239S102501H.fits 
 8 -- ft930414_0420_0239S102701H.fits 
 9 -- ft930414_0420_0239S102901H.fits 
 10 -- ft930414_0420_0239S103201H.fits 
 11 -- ft930414_0420_0239S103401H.fits 
 12 -- ft930414_0420_0239S103601H.fits 
 13 -- ft930414_0420_0239S103801H.fits 
 14 -- ft930414_0420_0239S104001H.fits 
 15 -- ft930414_0420_0239S104201H.fits 
 16 -- ft930414_0420_0239S104401H.fits 
 17 -- ft930414_0420_0239S104701H.fits 
 18 -- ft930414_0420_0239S105101H.fits 
 19 -- ft930414_0420_0239S105301H.fits 
 20 -- ft930414_0420_0239S105701H.fits 
 21 -- ft930414_0420_0239S106201H.fits 
 22 -- ft930414_0420_0239S106401H.fits 
 23 -- ft930414_0420_0239S107401H.fits 
 24 -- ft930414_0420_0239S108901H.fits 
 25 -- ft930414_0420_0239S109501H.fits 
 26 -- ft930414_0420_0239S109701H.fits 
 27 -- ft930414_0420_0239S110301H.fits 
 28 -- ft930414_0420_0239S110501H.fits 
 29 -- ft930414_0420_0239S110701H.fits 
 30 -- ft930414_0420_0239S111301H.fits 
 31 -- ft930414_0420_0239S111501H.fits 
 32 -- ft930414_0420_0239S112001H.fits 
 33 -- ft930414_0420_0239S112201H.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully! 

---- cmerge:  version 1.5 ----

A total of  23  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930414_0420_0239S100402M.fits 
 2 -- ft930414_0420_0239S100702M.fits 
 3 -- ft930414_0420_0239S100902M.fits 
 4 -- ft930414_0420_0239S101102M.fits 
 5 -- ft930414_0420_0239S101702M.fits 
 6 -- ft930414_0420_0239S101902M.fits 
 7 -- ft930414_0420_0239S105402M.fits 
 8 -- ft930414_0420_0239S105602M.fits 
 9 -- ft930414_0420_0239S105802M.fits 
 10 -- ft930414_0420_0239S106002M.fits 
 11 -- ft930414_0420_0239S106802M.fits 
 12 -- ft930414_0420_0239S107002M.fits 
 13 -- ft930414_0420_0239S107502M.fits 
 14 -- ft930414_0420_0239S107702M.fits 
 15 -- ft930414_0420_0239S107902M.fits 
 16 -- ft930414_0420_0239S108202M.fits 
 17 -- ft930414_0420_0239S109102M.fits 
 18 -- ft930414_0420_0239S109302M.fits 
 19 -- ft930414_0420_0239S109902M.fits 
 20 -- ft930414_0420_0239S110102M.fits 
 21 -- ft930414_0420_0239S110902M.fits 
 22 -- ft930414_0420_0239S111702M.fits 
 23 -- ft930414_0420_0239S111902M.fits 
Merging binary extension #: 2 
 1 -- ft930414_0420_0239S100402M.fits 
 2 -- ft930414_0420_0239S100702M.fits 
 3 -- ft930414_0420_0239S100902M.fits 
 4 -- ft930414_0420_0239S101102M.fits 
 5 -- ft930414_0420_0239S101702M.fits 
 6 -- ft930414_0420_0239S101902M.fits 
 7 -- ft930414_0420_0239S105402M.fits 
 8 -- ft930414_0420_0239S105602M.fits 
 9 -- ft930414_0420_0239S105802M.fits 
 10 -- ft930414_0420_0239S106002M.fits 
 11 -- ft930414_0420_0239S106802M.fits 
 12 -- ft930414_0420_0239S107002M.fits 
 13 -- ft930414_0420_0239S107502M.fits 
 14 -- ft930414_0420_0239S107702M.fits 
 15 -- ft930414_0420_0239S107902M.fits 
 16 -- ft930414_0420_0239S108202M.fits 
 17 -- ft930414_0420_0239S109102M.fits 
 18 -- ft930414_0420_0239S109302M.fits 
 19 -- ft930414_0420_0239S109902M.fits 
 20 -- ft930414_0420_0239S110102M.fits 
 21 -- ft930414_0420_0239S110902M.fits 
 22 -- ft930414_0420_0239S111702M.fits 
 23 -- ft930414_0420_0239S111902M.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully! 

---- cmerge:  version 1.5 ----

A total of  7  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930414_0420_0239S100102H.fits 
 2 -- ft930414_0420_0239S108402H.fits 
 3 -- ft930414_0420_0239S108602H.fits 
 4 -- ft930414_0420_0239S108802H.fits 
 5 -- ft930414_0420_0239S109402H.fits 
 6 -- ft930414_0420_0239S110202H.fits 
 7 -- ft930414_0420_0239S111202H.fits 
Merging binary extension #: 2 
 1 -- ft930414_0420_0239S100102H.fits 
 2 -- ft930414_0420_0239S108402H.fits 
 3 -- ft930414_0420_0239S108602H.fits 
 4 -- ft930414_0420_0239S108802H.fits 
 5 -- ft930414_0420_0239S109402H.fits 
 6 -- ft930414_0420_0239S110202H.fits 
 7 -- ft930414_0420_0239S111202H.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully! 

---- cmerge:  version 1.5 ----

A total of  2  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking GTI overlap in input files ... 
Merging binary extension #: 1 
 1 -- ft930414_0420_0239S103001H.fits 
 2 -- ft930414_0420_0239S104601H.fits 
Merging binary extension #: 2 
 1 -- ft930414_0420_0239S103001H.fits 
 2 -- ft930414_0420_0239S104601H.fits 
Checking the output file ...
 Extention # 1 ......   OK
 Extention # 2 ......   OK
The program appears to have finished successfully! 

ft930414_0420_0239S101802M.fits

ft930414_0420_0239S103301H.fits
ft930414_0420_0239S104801H.fits

ft930414_0420_0239S105201H.fits

ft930414_0420_0239S102601H.fits
ft930414_0420_0239S102801H.fits
ft930414_0420_0239S103501H.fits

ft930414_0420_0239S102401H.fits

ft930414_0420_0239S101002M.fits

ft930414_0420_0239S100802M.fits
ft930414_0420_0239S107602M.fits
ft930414_0420_0239S107802M.fits
ft930414_0420_0239S108002M.fits
ft930414_0420_0239S109202M.fits
ft930414_0420_0239S111802M.fits

ft930414_0420_0239S106301H.fits

ft930414_0420_0239S104901H.fits

ft930414_0420_0239S105001H.fits

ft930414_0420_0239S102201H.fits

ft930414_0420_0239S101301H.fits

ft930414_0420_0239S110601H.fits

ft930414_0420_0239S109001M.fits
ft930414_0420_0239S109801M.fits

ft930414_0420_0239S100202H.fits

ft930414_0420_0239S103901H.fits

ft930414_0420_0239S103101H.fits

ft930414_0420_0239S104501H.fits

ft930414_0420_0239S101501H.fits

ft930414_0420_0239S104301H.fits

ft930414_0420_0239S104101H.fits

ft930414_0420_0239S103701H.fits

ft930414_0420_0239S108302H.fits

a ft930414_0420_0239G200670M.fits 40K
a ft930414_0420_0239G200870H.fits 40K
a ft930414_0420_0239G200970H.fits 40K
a ft930414_0420_0239G201070H.fits 40K
a ft930414_0420_0239G201270H.fits 40K
a ft930414_0420_0239G201670H.fits 40K
a ft930414_0420_0239G201770H.fits 40K
a ft930414_0420_0239G201870H.fits 40K
a ft930414_0420_0239G202070H.fits 40K
a ft930414_0420_0239G202470H.fits 40K
a ft930414_0420_0239G202570H.fits 40K
a ft930414_0420_0239G202670H.fits 40K
a ft930414_0420_0239G202870H.fits 40K
a ft930414_0420_0239G203070H.fits 40K
a ft930414_0420_0239G203270H.fits 40K
a ft930414_0420_0239G203470H.fits 40K
a ft930414_0420_0239G203670H.fits 40K
a ft930414_0420_0239G204170H.fits 40K
a ft930414_0420_0239G204270H.fits 40K
a ft930414_0420_0239G204370H.fits 40K
a ft930414_0420_0239G204770H.fits 40K
a ft930414_0420_0239G204870H.fits 40K
a ft930414_0420_0239G204970H.fits 40K
a ft930414_0420_0239G205570M.fits 40K
a ft930414_0420_0239G205770M.fits 40K
a ft930414_0420_0239G206570M.fits 40K
a ft930414_0420_0239G206770M.fits 40K
a ft930414_0420_0239G206970M.fits 40K
a ft930414_0420_0239G207370H.fits 40K
a ft930414_0420_0239G208270M.fits 40K
a ft930414_0420_0239G208470H.fits 40K
a ft930414_0420_0239G208570H.fits 40K
a ft930414_0420_0239G208670H.fits 40K
a ft930414_0420_0239G209070H.fits 40K
a ft930414_0420_0239G209470M.fits 40K
a ft930414_0420_0239G209670H.fits 40K
a ft930414_0420_0239G209770H.fits 40K
a ft930414_0420_0239G209870H.fits 40K
a ft930414_0420_0239G210270H.fits 40K
a ft930414_0420_0239G210470H.fits 40K
a ft930414_0420_0239G210970H.fits 40K
a ft930414_0420_0239G211070H.fits 40K
a ft930414_0420_0239G211170H.fits 40K
a ft930414_0420_0239G211570H.fits 40K
a ft930414_0420_0239G211970M.fits 40K
a ft930414_0420_0239G212170H.fits 40K
a ft930414_0420_0239G212270H.fits 40K
a ft930414_0420_0239G212370H.fits 40K
a ft930414_0420_0239G300670M.fits 40K
a ft930414_0420_0239G300870H.fits 40K
a ft930414_0420_0239G300970H.fits 40K
a ft930414_0420_0239G301070H.fits 40K
a ft930414_0420_0239G301270H.fits 40K
a ft930414_0420_0239G301470H.fits 40K
a ft930414_0420_0239G302070H.fits 40K
a ft930414_0420_0239G302170H.fits 40K
a ft930414_0420_0239G302270H.fits 40K
a ft930414_0420_0239G302470H.fits 40K
a ft930414_0420_0239G302670H.fits 40K
a ft930414_0420_0239G302870H.fits 40K
a ft930414_0420_0239G303070H.fits 40K
a ft930414_0420_0239G303270H.fits 40K
a ft930414_0420_0239G303670M.fits 45K
a ft930414_0420_0239G303870H.fits 40K
a ft930414_0420_0239G303970H.fits 40K
a ft930414_0420_0239G304070H.fits 40K
a ft930414_0420_0239G304270H.fits 40K
a ft930414_0420_0239G304470H.fits 40K
a ft930414_0420_0239G304670H.fits 40K
a ft930414_0420_0239G304870H.fits 40K
a ft930414_0420_0239G305070H.fits 40K
a ft930414_0420_0239G305270H.fits 40K
a ft930414_0420_0239G305470H.fits 40K
a ft930414_0420_0239G305670H.fits 40K
a ft930414_0420_0239G305870H.fits 40K
a ft930414_0420_0239G306070H.fits 40K
a ft930414_0420_0239G306270H.fits 40K
a ft930414_0420_0239G306470H.fits 40K
a ft930414_0420_0239G306670H.fits 40K
a ft930414_0420_0239G306870H.fits 40K
a ft930414_0420_0239G307070H.fits 40K
a ft930414_0420_0239G307270H.fits 40K
a ft930414_0420_0239G307570H.fits 40K
a ft930414_0420_0239G307770H.fits 40K
a ft930414_0420_0239G308270M.fits 40K
a ft930414_0420_0239G308470H.fits 40K
a ft930414_0420_0239G308570H.fits 40K
a ft930414_0420_0239G308670H.fits 40K
a ft930414_0420_0239G309070H.fits 40K
a ft930414_0420_0239G309170H.fits 40K
a ft930414_0420_0239G309270H.fits 40K
a ft930414_0420_0239G309870M.fits 40K
a ft930414_0420_0239G310070M.fits 40K
a ft930414_0420_0239G310870M.fits 40K
a ft930414_0420_0239G311070M.fits 40K
a ft930414_0420_0239G311270M.fits 40K
a ft930414_0420_0239G311670H.fits 40K
a ft930414_0420_0239G312670M.fits 40K
a ft930414_0420_0239G312870H.fits 40K
a ft930414_0420_0239G312970H.fits 40K
a ft930414_0420_0239G313070H.fits 40K
a ft930414_0420_0239G313470H.fits 40K
a ft930414_0420_0239G313870M.fits 40K
a ft930414_0420_0239G314070H.fits 40K
a ft930414_0420_0239G314170H.fits 40K
a ft930414_0420_0239G314670H.fits 40K
a ft930414_0420_0239G314870H.fits 40K
a ft930414_0420_0239G315370H.fits 40K
a ft930414_0420_0239G315470H.fits 40K
a ft930414_0420_0239G315570H.fits 40K
a ft930414_0420_0239G315970H.fits 40K
a ft930414_0420_0239G316370M.fits 40K
a ft930414_0420_0239G316570H.fits 40K
a ft930414_0420_0239G316670H.fits 40K
a ft930414_0420_0239G316770H.fits 40K
a ft930414_0420_0239S000202H.fits 40K
a ft930414_0420_0239S000802M.fits 40K
a ft930414_0420_0239S001002M.fits 51K
a ft930414_0420_0239S001301H.fits 51K
a ft930414_0420_0239S001501H.fits 48K
a ft930414_0420_0239S001802M.fits 65K
a ft930414_0420_0239S002201H.fits 45K
a ft930414_0420_0239S002401H.fits 43K
a ft930414_0420_0239S002601H.fits 45K
a ft930414_0420_0239S002801H.fits 45K
a ft930414_0420_0239S002901H.fits 48K
a ft930414_0420_0239S003101H.fits 45K
a ft930414_0420_0239S003301H.fits 43K
a ft930414_0420_0239S003501H.fits 43K
a ft930414_0420_0239S003701H.fits 43K
a ft930414_0420_0239S003901H.fits 43K
a ft930414_0420_0239S004201H.fits 40K
a ft930414_0420_0239S004401H.fits 40K
a ft930414_0420_0239S004601H.fits 43K
a ft930414_0420_0239S004801H.fits 68K
a ft930414_0420_0239S004901H.fits 60K
a ft930414_0420_0239S005101H.fits 60K
a ft930414_0420_0239S006201H.fits 48K
a ft930414_0420_0239S007502M.fits 40K
a ft930414_0420_0239S007702M.fits 40K
a ft930414_0420_0239S007902M.fits 40K
a ft930414_0420_0239S008202H.fits 40K
a ft930414_0420_0239S009102M.fits 40K
a ft930414_0420_0239S010301H.fits 60K
a ft930414_0420_0239S011502M.fits 40K
a ft930414_0420_0239S100202H.fits 40K
a ft930414_0420_0239S100802M.fits 40K
a ft930414_0420_0239S101002M.fits 48K
a ft930414_0420_0239S101301H.fits 45K
a ft930414_0420_0239S101501H.fits 40K
a ft930414_0420_0239S101802M.fits 65K
a ft930414_0420_0239S102201H.fits 45K
a ft930414_0420_0239S102401H.fits 54K
a ft930414_0420_0239S102601H.fits 48K
a ft930414_0420_0239S102801H.fits 45K
a ft930414_0420_0239S103101H.fits 40K
a ft930414_0420_0239S103301H.fits 45K
a ft930414_0420_0239S103501H.fits 43K
a ft930414_0420_0239S103701H.fits 40K
a ft930414_0420_0239S103901H.fits 43K
a ft930414_0420_0239S104101H.fits 40K
a ft930414_0420_0239S104301H.fits 40K
a ft930414_0420_0239S104501H.fits 40K
a ft930414_0420_0239S104801H.fits 60K
a ft930414_0420_0239S104901H.fits 48K
a ft930414_0420_0239S105001H.fits 48K
a ft930414_0420_0239S105201H.fits 60K
a ft930414_0420_0239S106301H.fits 48K
a ft930414_0420_0239S107602M.fits 40K
a ft930414_0420_0239S107802M.fits 40K
a ft930414_0420_0239S108002M.fits 40K
a ft930414_0420_0239S108302H.fits 40K
a ft930414_0420_0239S109001M.fits 40K
a ft930414_0420_0239S109202M.fits 40K
a ft930414_0420_0239S109801M.fits 40K
a ft930414_0420_0239S110601H.fits 43K
a ft930414_0420_0239S111802M.fits 40K

Converting FAINT mode files to BRIGHT and BRIGHT2 modes ( 19:01:26 )

Creating GIS gain history file ( 19:33:11 )

temp2gain v4.2
opening ft930414_0420.0239
'ft930414_0420.0239' is successfully opened
Data Start Time is 8914798.72 (930414 041958)
Time Margin 2.0 sec included
Sync error detected in 1733 th SF
Sync error detected in 2230 th SF
Sync error detected in 2411 th SF
Sync error detected in 2526 th SF
Sync error detected in 2983 th SF
Sync error detected in 3085 th SF
Sync error detected in 3145 th SF
Sync error detected in 3196 th SF
Sync error detected in 3264 th SF
Sync error detected in 3328 th SF
Sync error detected in 3388 th SF
Sync error detected in 3436 th SF
Sync error detected in 3442 th SF
Sync error detected in 3495 th SF
Sync error detected in 3524 th SF
Sync error detected in 7638 th SF
Sync error detected in 10845 th SF
'ft930414_0420.0239' EOF detected, sf=19479
Data End Time is 8995186.44 (930415 023946)
Gain History is written in ft930414_0420_0239.ghf

 
Time column is TIME ORDERED

 
Time column is TIME ORDERED

Running ASCALIN on unfiltered event files ( 19:36:27 )

ASCALIN_V0.9t

ASCALIN_V0.9t

ASCALIN_V0.9t

ASCALIN_V0.9t

ASCALIN_V0.9t

ASCALIN_V0.9t

ASCALIN_V0.9t

ASCALIN_V0.9t

ASCALIN_V0.9t

ASCALIN_V0.9t

ASCALIN_V0.9t

ASCALIN_V0.9t

ASCALIN_V0.9t

ASCALIN_V0.9t

ASCALIN_V0.9t

ASCALIN_V0.9t

ASCALIN_V0.9t

ASCALIN_V0.9t

ASCALIN_V0.9t

ASCALIN_V0.9t

ASCALIN_V0.9t

ASCALIN_V0.9t

Creating filter files ( 20:13:43 )

Date and time are: 93/ 4/14  4:20  mjd=49091.180556 
Orbit file name is ./frf.orbit.214
Epoch of Orbital Elements: 1993/4/13 0:0:0
Rigidity Data File: ./rigidity.data.1.23
Attitude FRF: fa930414_0420.0239
S0-HK file: ft930414_0420_0239S0HK.fits
S1-HK file: ft930414_0420_0239S1HK.fits
G2-HK file: ft930414_0420_0239G2HK.fits
G3-HK file: ft930414_0420_0239G3HK.fits
output FITS File: ft930414_0420_0239.mkf
Total 2513 Data bins were processed.

 
Time column is TIME ORDERED

Cleaning and filtering the unfiltered event files ( 20:42:59 )

 The sum of the selected column is                   10116.443
 The mean of the selected column is                  26.552343
 The standard deviation of the selected column is    10.426156
 The minimum of selected column is                   1.9375070
 The maximum of selected column is                   105.87537
 The number of points used in calculation is              381

 The sum of the selected column is                   7260.3745
 The mean of the selected column is                  19.056101
 The standard deviation of the selected column is    7.4882525
 The minimum of selected column is                   2.2827463
 The maximum of selected column is                   55.125191
 The number of points used in calculation is              381

 The sum of the selected column is                   9210.8554
 The mean of the selected column is                  29.056326
 The standard deviation of the selected column is    14.101020
 The minimum of selected column is                   6.8437738
 The maximum of selected column is                   119.31292
 The number of points used in calculation is              317

 The sum of the selected column is                   8875.4905
 The mean of the selected column is                  23.923155
 The standard deviation of the selected column is    11.351308
 The minimum of selected column is                   1.6468810
 The maximum of selected column is                   94.156578
 The number of points used in calculation is              371

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL0>0.0 && S0_PIXL0<57.8 )&&
(S0_PIXL1>0.0 && S0_PIXL1<41.5 )&&
(S0_PIXL2>0.0 && S0_PIXL2<71.3 )&&
(S0_PIXL3>0.0 && S0_PIXL3<57.9 )  )
&&(  (S0_SATF0<1)
   ||(S0_SATF0>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF2<1)
   ||(S0_SATF2>1))
&&(  (S0_SATF3<1)
   ||(S0_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 IC443    BRIGHT   HIGH     14/04/93 06:25:04 0.28E+05   278067 1111
 
Processing file: /data/data15/seq_proc/10011010.006/ad10011010s000102h.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
         256608    127138              0    129470         0         0
 Writing events file
 127138 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        256608    127138              0    129470         0         0
   in    9591.02 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data15/seq_proc/10011010.006/screen_in_event.xsl
    reading data file: /data/data15/seq_proc/10011010.006/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :       127138
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              66       33451
 Flickering pixels iter, pixels & cnts :   1          65        1220
cleaning chip #           1
 Hot pixels & counts                   :              21        8382
 Flickering pixels iter, pixels & cnts :   1          48         557
cleaning chip #           2
 Hot pixels & counts                   :              12        2533
 Flickering pixels iter, pixels & cnts :   1          66         851
cleaning chip #           3
 Hot pixels & counts                   :              15        4785
 Flickering pixels iter, pixels & cnts :   1          48         443
 Flickering pixels iter, pixels & cnts :   2           1           6
 
 Number of pixels rejected           :          342
 Number of (internal) image counts   :       127138
 Number of image cts rejected (N, %) :        52228     41.0797729
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :           131           69           78           64
 
 Image counts      :         60862        27866        18452        19958
 Image cts rejected:         34671         8939         3384         5234
 Image cts rej (%) :         56.97        32.08        18.34        26.23
 
    filtering data...
 
 Total counts      :         60862        27866        18452        19958
 Total cts rejected:         34671         8939         3384         5234
 Total cts rej (%) :         56.97        32.08        18.34        26.23
 
 Number of clean counts accepted  :        74910
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          342
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!screen:ASCA > read events ad10011010s000102h.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad10011010s000102h.evt use_events=no
 Wrote cleaned events file to ad10011010s000102h.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no

 The sum of the selected column is                   10116.443
 The mean of the selected column is                  26.552343
 The standard deviation of the selected column is    10.426156
 The minimum of selected column is                   1.9375070
 The maximum of selected column is                   105.87537
 The number of points used in calculation is              381

 The sum of the selected column is                   7260.3745
 The mean of the selected column is                  19.056101
 The standard deviation of the selected column is    7.4882525
 The minimum of selected column is                   2.2827463
 The maximum of selected column is                   55.125191
 The number of points used in calculation is              381

 The sum of the selected column is                   9210.8554
 The mean of the selected column is                  29.056326
 The standard deviation of the selected column is    14.101020
 The minimum of selected column is                   6.8437738
 The maximum of selected column is                   119.31292
 The number of points used in calculation is              317

 The sum of the selected column is                   8875.4905
 The mean of the selected column is                  23.923155
 The standard deviation of the selected column is    11.351308
 The minimum of selected column is                   1.6468810
 The maximum of selected column is                   94.156578
 The number of points used in calculation is              371

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL0>0.0 && S0_PIXL0<57.8 )&&
(S0_PIXL1>0.0 && S0_PIXL1<41.5 )&&
(S0_PIXL2>0.0 && S0_PIXL2<71.3 )&&
(S0_PIXL3>0.0 && S0_PIXL3<57.9 )  )
&&(  (S0_SATF0<1)
   ||(S0_SATF0>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF2<1)
   ||(S0_SATF2>1))
&&(  (S0_SATF3<1)
   ||(S0_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 IC443    BRIGHT2  HIGH     14/04/93 06:25:04 0.28E+05   301669 1111
 
Processing file: /data/data15/seq_proc/10011010.006/ad10011010s000112h.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
         259680    128660              0    131020         0         0
 Writing events file
 128660 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        259680    128660              0    131020         0         0
   in    9591.02 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data15/seq_proc/10011010.006/screen_in_event.xsl
    reading data file: /data/data15/seq_proc/10011010.006/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :       128660
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              66       33813
 Flickering pixels iter, pixels & cnts :   1          67        1263
cleaning chip #           1
 Hot pixels & counts                   :              21        8407
 Flickering pixels iter, pixels & cnts :   1          47         556
cleaning chip #           2
 Hot pixels & counts                   :              12        2552
 Flickering pixels iter, pixels & cnts :   1          66         876
cleaning chip #           3
 Hot pixels & counts                   :              15        4808
 Flickering pixels iter, pixels & cnts :   1          48         447
 Flickering pixels iter, pixels & cnts :   2           1           6
 
 Number of pixels rejected           :          343
 Number of (internal) image counts   :       128660
 Number of image cts rejected (N, %) :        52728     40.9824333
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :           133           68           78           64
 
 Image counts      :         61585        28089        18759        20227
 Image cts rejected:         35076         8963         3428         5261
 Image cts rej (%) :         56.96        31.91        18.27        26.01
 
    filtering data...
 
 Total counts      :         61585        28089        18759        20227
 Total cts rejected:         35076         8963         3428         5261
 Total cts rej (%) :         56.96        31.91        18.27        26.01
 
 Number of clean counts accepted  :        75932
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          343
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!screen:ASCA > read events ad10011010s000112h.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!screen:ASCA-SIS0-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT2 > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS0-BRIGHT2 > extract events
!screen:ASCA-SIS0-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT2 > save clean outfile=ad10011010s000112h.evt use_events=no
 Wrote cleaned events file to ad10011010s000112h.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS0-BRIGHT2 > exit save_session=no

 The sum of the selected column is                   7317.8383
 The mean of the selected column is                  28.363714
 The standard deviation of the selected column is    11.899403
 The minimum of selected column is                   13.312548
 The maximum of selected column is                   122.06293
 The number of points used in calculation is              258

 The sum of the selected column is                   5831.4894
 The mean of the selected column is                  22.515403
 The standard deviation of the selected column is    12.178509
 The minimum of selected column is                   6.1875243
 The maximum of selected column is                   108.06288
 The number of points used in calculation is              259

 The sum of the selected column is                   24216.701
 The mean of the selected column is                  93.500778
 The standard deviation of the selected column is    163.70517
 The minimum of selected column is                   9.9375343
 The maximum of selected column is                   965.94104
 The number of points used in calculation is              259

 The sum of the selected column is                   8199.0915
 The mean of the selected column is                  31.656724
 The standard deviation of the selected column is    25.086718
 The minimum of selected column is                   9.4375334
 The maximum of selected column is                   202.25072
 The number of points used in calculation is              259

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL0>0.0 && S0_PIXL0<64 )&&
(S0_PIXL1>0.0 && S0_PIXL1<59 )&&
(S0_PIXL2>0.0 && S0_PIXL2<584.6 )&&
(S0_PIXL3>0.0 && S0_PIXL3<106.9 )  )
&&(  (S0_SATF0<1)
   ||(S0_SATF0>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF2<1)
   ||(S0_SATF2>1))
&&(  (S0_SATF3<1)
   ||(S0_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 IC443    BRIGHT   MEDIUM   14/04/93 05:09:00 0.30E+05   293699 1111
 
Processing file: /data/data15/seq_proc/10011010.006/ad10011010s000202m.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
         271812    100956              0    170856         0         0
 Writing events file
 100956 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        271812    100956              0    170856         0         0
   in    7730.66 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data15/seq_proc/10011010.006/screen_in_event.xsl
    reading data file: /data/data15/seq_proc/10011010.006/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :       100956
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              66       26836
 Flickering pixels iter, pixels & cnts :   1          58         936
cleaning chip #           1
 Hot pixels & counts                   :              20        6404
 Flickering pixels iter, pixels & cnts :   1          41         434
cleaning chip #           2
 Hot pixels & counts                   :              12        2045
 Flickering pixels iter, pixels & cnts :   1          66         680
cleaning chip #           3
 Hot pixels & counts                   :              15        3579
 Flickering pixels iter, pixels & cnts :   1          39         397
 Flickering pixels iter, pixels & cnts :   2           1           6
 
 Number of pixels rejected           :          318
 Number of (internal) image counts   :       100956
 Number of image cts rejected (N, %) :        41317     40.9257507
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :           124           61           78           55
 
 Image counts      :         49611        22132        14083        15130
 Image cts rejected:         27772         6838         2725         3982
 Image cts rej (%) :         55.98        30.90        19.35        26.32
 
    filtering data...
 
 Total counts      :         49611        22132        14083        15130
 Total cts rejected:         27772         6838         2725         3982
 Total cts rej (%) :         55.98        30.90        19.35        26.32
 
 Number of clean counts accepted  :        59639
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          318
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!screen:ASCA > read events ad10011010s000202m.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad10011010s000202m.evt use_events=no
 Wrote cleaned events file to ad10011010s000202m.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL0>0)&&
(S0_PIXL1>0)&&
(S0_PIXL2>0)&&
(S0_PIXL3>0)  )
&&(  (S0_SATF0<1)
   ||(S0_SATF0>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF2<1)
   ||(S0_SATF2>1))
&&(  (S0_SATF3<1)
   ||(S0_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 IC443    BRIGHT   HIGH     14/04/93 04:19:48 0.22E+04    25174 1111
 
Processing file: /data/data15/seq_proc/10011010.006/ad10011010s000302h.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data15/seq_proc/10011010.006/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data15/seq_proc/10011010.006/screen_in_event.xsl
    reading data file: /data/data15/seq_proc/10011010.006/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip #           0
cleaning chip #           1
cleaning chip #           2
cleaning chip #           3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0      0.0000000
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!screen:ASCA > read events ad10011010s000302h.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad10011010s000302h.evt use_events=no
 Wrote cleaned events file to ad10011010s000302h.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL0>0)&&
(S0_PIXL1>0)&&
(S0_PIXL2>0)&&
(S0_PIXL3>0)  )
&&(  (S0_SATF0<1)
   ||(S0_SATF0>1))
&&(  (S0_SATF3<1)
   ||(S0_SATF3>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF2<1)
   ||(S0_SATF2>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 IC443    BRIGHT   HIGH     14/04/93 08:22:08 0.25E+03     1677 1111
 
Processing file: /data/data15/seq_proc/10011010.006/ad10011010s000402h.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data15/seq_proc/10011010.006/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data15/seq_proc/10011010.006/screen_in_event.xsl
    reading data file: /data/data15/seq_proc/10011010.006/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip #           0
cleaning chip #           1
cleaning chip #           2
cleaning chip #           3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0      0.0000000
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!screen:ASCA > read events ad10011010s000402h.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad10011010s000402h.evt use_events=no
 Wrote cleaned events file to ad10011010s000402h.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL0>0)&&
(S0_PIXL1>0)&&
(S0_PIXL2>0)&&
(S0_PIXL3>0)  )
&&(  (S0_SATF0<1)
   ||(S0_SATF0>1))
&&(  (S0_SATF3<1)
   ||(S0_SATF3>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF2<1)
   ||(S0_SATF2>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 IC443    BRIGHT2  HIGH     14/04/93 08:22:08 0.25E+03     1766 1111
 
Processing file: /data/data15/seq_proc/10011010.006/ad10011010s000412h.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data15/seq_proc/10011010.006/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data15/seq_proc/10011010.006/screen_in_event.xsl
    reading data file: /data/data15/seq_proc/10011010.006/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip #           0
cleaning chip #           1
cleaning chip #           2
cleaning chip #           3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0      0.0000000
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!screen:ASCA > read events ad10011010s000412h.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!screen:ASCA-SIS0-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT2 > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS0-BRIGHT2 > extract events
!screen:ASCA-SIS0-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT2 > save clean outfile=ad10011010s000412h.evt use_events=no
 Wrote cleaned events file to ad10011010s000412h.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS0-BRIGHT2 > exit save_session=no

 The sum of the selected column is                   12128.586
 The mean of the selected column is                  31.584860
 The standard deviation of the selected column is    13.675356
 The minimum of selected column is                   1.7156312
 The maximum of selected column is                   92.969070
 The number of points used in calculation is              384

 The sum of the selected column is                   12445.107
 The mean of the selected column is                  32.324955
 The standard deviation of the selected column is    14.600411
 The minimum of selected column is                   3.2440593
 The maximum of selected column is                   102.21910
 The number of points used in calculation is              385

 The sum of the selected column is                   13068.771
 The mean of the selected column is                  33.944861
 The standard deviation of the selected column is    13.907817
 The minimum of selected column is                   2.4256041
 The maximum of selected column is                   106.31287
 The number of points used in calculation is              385

 The sum of the selected column is                   12646.048
 The mean of the selected column is                  32.846877
 The standard deviation of the selected column is    15.225980
 The minimum of selected column is                   2.5089376
 The maximum of selected column is                   127.40670
 The number of points used in calculation is              385

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL0>0.0 && S1_PIXL0<72.6 )&&
(S1_PIXL1>0.0 && S1_PIXL1<76.1 )&&
(S1_PIXL2>0.0 && S1_PIXL2<75.6 )&&
(S1_PIXL3>0.0 && S1_PIXL3<78.5 )  )
&&(  (S1_SATF0<1)
   ||(S1_SATF0>1))
&&(  (S1_SATF1<1)
   ||(S1_SATF1>1))
&&(  (S1_SATF2<1)
   ||(S1_SATF2>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT   HIGH     14/04/93 06:25:04 0.28E+05   295359 1111
 
Processing file: /data/data15/seq_proc/10011010.006/ad10011010s100102h.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
         263581    148094              0    115487         0         0
 Writing events file
 148094 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        263581    148094              0    115487         0         0
   in   11603.15 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data15/seq_proc/10011010.006/screen_in_event.xsl
    reading data file: /data/data15/seq_proc/10011010.006/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :       148094
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              29        9837
 Flickering pixels iter, pixels & cnts :   1          63         917
cleaning chip #           1
 Hot pixels & counts                   :              31       13504
 Flickering pixels iter, pixels & cnts :   1          53         874
 Flickering pixels iter, pixels & cnts :   2           1           3
cleaning chip #           2
 Hot pixels & counts                   :              24       13922
 Flickering pixels iter, pixels & cnts :   1          63        1311
 Flickering pixels iter, pixels & cnts :   2           1          10
cleaning chip #           3
 Hot pixels & counts                   :              19        8448
 Flickering pixels iter, pixels & cnts :   1          59         939
 
 Number of pixels rejected           :          343
 Number of (internal) image counts   :       148094
 Number of image cts rejected (N, %) :        49765     33.6036568
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            92           85           88           78
 
 Image counts      :         26392        36606        58829        26267
 Image cts rejected:         10754        14381        15243         9387
 Image cts rej (%) :         40.75        39.29        25.91        35.74
 
    filtering data...
 
 Total counts      :         26392        36606        58829        26267
 Total cts rejected:         10754        14381        15243         9387
 Total cts rej (%) :         40.75        39.29        25.91        35.74
 
 Number of clean counts accepted  :        98329
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          343
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!screen:ASCA > read events ad10011010s100102h.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad10011010s100102h.evt use_events=no
 Wrote cleaned events file to ad10011010s100102h.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no

 The sum of the selected column is                   12128.586
 The mean of the selected column is                  31.584860
 The standard deviation of the selected column is    13.675356
 The minimum of selected column is                   1.7156312
 The maximum of selected column is                   92.969070
 The number of points used in calculation is              384

 The sum of the selected column is                   12445.107
 The mean of the selected column is                  32.324955
 The standard deviation of the selected column is    14.600411
 The minimum of selected column is                   3.2440593
 The maximum of selected column is                   102.21910
 The number of points used in calculation is              385

 The sum of the selected column is                   13068.771
 The mean of the selected column is                  33.944861
 The standard deviation of the selected column is    13.907817
 The minimum of selected column is                   2.4256041
 The maximum of selected column is                   106.31287
 The number of points used in calculation is              385

 The sum of the selected column is                   12646.048
 The mean of the selected column is                  32.846877
 The standard deviation of the selected column is    15.225980
 The minimum of selected column is                   2.5089376
 The maximum of selected column is                   127.40670
 The number of points used in calculation is              385

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL0>0.0 && S1_PIXL0<72.6 )&&
(S1_PIXL1>0.0 && S1_PIXL1<76.1 )&&
(S1_PIXL2>0.0 && S1_PIXL2<75.6 )&&
(S1_PIXL3>0.0 && S1_PIXL3<78.5 )  )
&&(  (S1_SATF0<1)
   ||(S1_SATF0>1))
&&(  (S1_SATF1<1)
   ||(S1_SATF1>1))
&&(  (S1_SATF2<1)
   ||(S1_SATF2>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT2  HIGH     14/04/93 06:25:04 0.28E+05   320404 1111
 
Processing file: /data/data15/seq_proc/10011010.006/ad10011010s100112h.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
         265864    149260              0    116604         0         0
 Writing events file
 149260 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        265864    149260              0    116604         0         0
   in   11603.15 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data15/seq_proc/10011010.006/screen_in_event.xsl
    reading data file: /data/data15/seq_proc/10011010.006/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :       149260
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              29        9902
 Flickering pixels iter, pixels & cnts :   1          63         929
cleaning chip #           1
 Hot pixels & counts                   :              31       13539
 Flickering pixels iter, pixels & cnts :   1          54         878
 Flickering pixels iter, pixels & cnts :   2           1           3
cleaning chip #           2
 Hot pixels & counts                   :              24       14044
 Flickering pixels iter, pixels & cnts :   1          63        1316
 Flickering pixels iter, pixels & cnts :   2           1          10
cleaning chip #           3
 Hot pixels & counts                   :              19        8491
 Flickering pixels iter, pixels & cnts :   1          56         935
 
 Number of pixels rejected           :          341
 Number of (internal) image counts   :       149260
 Number of image cts rejected (N, %) :        50047     33.5300827
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            92           86           88           75
 
 Image counts      :         26625        36872        59302        26461
 Image cts rejected:         10831        14420        15370         9426
 Image cts rej (%) :         40.68        39.11        25.92        35.62
 
    filtering data...
 
 Total counts      :         26625        36872        59302        26461
 Total cts rejected:         10831        14420        15370         9426
 Total cts rej (%) :         40.68        39.11        25.92        35.62
 
 Number of clean counts accepted  :        99213
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          341
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!screen:ASCA > read events ad10011010s100112h.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS1-BRIGHT2 > extract events
!screen:ASCA-SIS1-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT2 > save clean outfile=ad10011010s100112h.evt use_events=no
 Wrote cleaned events file to ad10011010s100112h.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS1-BRIGHT2 > exit save_session=no

 The sum of the selected column is                   10934.414
 The mean of the selected column is                  42.217813
 The standard deviation of the selected column is    66.405648
 The minimum of selected column is                   5.4062696
 The maximum of selected column is                   1028.4724
 The number of points used in calculation is              259

 The sum of the selected column is                   9910.8057
 The mean of the selected column is                  38.265659
 The standard deviation of the selected column is    26.647368
 The minimum of selected column is                   9.9687853
 The maximum of selected column is                   235.84457
 The number of points used in calculation is              259

 The sum of the selected column is                   9985.5666
 The mean of the selected column is                  38.554311
 The standard deviation of the selected column is    20.306608
 The minimum of selected column is                   12.531294
 The maximum of selected column is                   189.93817
 The number of points used in calculation is              259

 The sum of the selected column is                   9679.7082
 The mean of the selected column is                  37.373391
 The standard deviation of the selected column is    23.961639
 The minimum of selected column is                   10.281286
 The maximum of selected column is                   255.71965
 The number of points used in calculation is              259

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL0>0.0 && S1_PIXL0<241.4 )&&
(S1_PIXL1>0.0 && S1_PIXL1<118.2 )&&
(S1_PIXL2>0.0 && S1_PIXL2<99.4 )&&
(S1_PIXL3>0.0 && S1_PIXL3<109.2 )  )
&&(  (S1_SATF0<1)
   ||(S1_SATF0>1))
&&(  (S1_SATF1<1)
   ||(S1_SATF1>1))
&&(  (S1_SATF2<1)
   ||(S1_SATF2>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT   MEDIUM   14/04/93 05:09:00 0.30E+05   312611 1111
 
Processing file: /data/data15/seq_proc/10011010.006/ad10011010s100202m.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
         281922    102070              0    179852         0         0
 Writing events file
 102070 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        281922    102070              0    179852         0         0
   in    7914.66 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data15/seq_proc/10011010.006/screen_in_event.xsl
    reading data file: /data/data15/seq_proc/10011010.006/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :       102070
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              28        6889
 Flickering pixels iter, pixels & cnts :   1          58         668
cleaning chip #           1
 Hot pixels & counts                   :              28        8874
 Flickering pixels iter, pixels & cnts :   1          52         684
cleaning chip #           2
 Hot pixels & counts                   :              24        9645
 Flickering pixels iter, pixels & cnts :   1          53         740
 Flickering pixels iter, pixels & cnts :   2           1          12
cleaning chip #           3
 Hot pixels & counts                   :              20        6179
 Flickering pixels iter, pixels & cnts :   1          46         608
 Flickering pixels iter, pixels & cnts :   2           1           3
 
 Number of pixels rejected           :          311
 Number of (internal) image counts   :       102070
 Number of image cts rejected (N, %) :        34302     33.6063499
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            86           80           78           67
 
 Image counts      :         18356        25188        40185        18341
 Image cts rejected:          7557         9558        10397         6790
 Image cts rej (%) :         41.17        37.95        25.87        37.02
 
    filtering data...
 
 Total counts      :         18356        25188        40185        18341
 Total cts rejected:          7557         9558        10397         6790
 Total cts rej (%) :         41.17        37.95        25.87        37.02
 
 Number of clean counts accepted  :        67768
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          311
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!screen:ASCA > read events ad10011010s100202m.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad10011010s100202m.evt use_events=no
 Wrote cleaned events file to ad10011010s100202m.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL0>0)&&
(S1_PIXL1>0)&&
(S1_PIXL2>0)&&
(S1_PIXL3>0)  )
&&(  (S1_SATF0<1)
   ||(S1_SATF0>1))
&&(  (S1_SATF1<1)
   ||(S1_SATF1>1))
&&(  (S1_SATF2<1)
   ||(S1_SATF2>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT   HIGH     14/04/93 04:19:44 0.23E+04    23965 1111
 
Processing file: /data/data15/seq_proc/10011010.006/ad10011010s100302h.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data15/seq_proc/10011010.006/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data15/seq_proc/10011010.006/screen_in_event.xsl
    reading data file: /data/data15/seq_proc/10011010.006/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip #           0
cleaning chip #           1
cleaning chip #           2
cleaning chip #           3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0      0.0000000
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!screen:ASCA > read events ad10011010s100302h.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad10011010s100302h.evt use_events=no
 Wrote cleaned events file to ad10011010s100302h.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL0>0)&&
(S1_PIXL1>0)&&
(S1_PIXL2>0)&&
(S1_PIXL3>0)  )
&&(  (S1_SATF0<1)
   ||(S1_SATF0>1))
&&(  (S1_SATF1<1)
   ||(S1_SATF1>1))
&&(  (S1_SATF2<1)
   ||(S1_SATF2>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT   HIGH     14/04/93 08:06:08 0.23E+03     1414 1111
 
Processing file: /data/data15/seq_proc/10011010.006/ad10011010s100402h.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
           1264        29              0      1235         0         0
 Writing events file
     29 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1264        29              0      1235         0         0
   in       1.97 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data15/seq_proc/10011010.006/screen_in_event.xsl
    reading data file: /data/data15/seq_proc/10011010.006/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :           29
 
    copy bad pix array...
cleaning chip #           0
cleaning chip #           1
cleaning chip #           2
cleaning chip #           3
 Hot pixels & counts                   :               0           0
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :           29
 Number of image cts rejected (N, %) :            0      0.0000000
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0           29
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0           29
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :           29
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!screen:ASCA > read events ad10011010s100402h.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad10011010s100402h.evt use_events=no
 Wrote cleaned events file to ad10011010s100402h.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL0>0)&&
(S1_PIXL1>0)&&
(S1_PIXL2>0)&&
(S1_PIXL3>0)  )
&&(  (S1_SATF0<1)
   ||(S1_SATF0>1))
&&(  (S1_SATF1<1)
   ||(S1_SATF1>1))
&&(  (S1_SATF2<1)
   ||(S1_SATF2>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT2  HIGH     14/04/93 08:06:08 0.23E+03     1556 1111
 
Processing file: /data/data15/seq_proc/10011010.006/ad10011010s100412h.unf
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
           1273        29              0      1244         0         0
 Writing events file
     29 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1273        29              0      1244         0         0
   in       1.97 seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data15/seq_proc/10011010.006/screen_in_event.xsl
    reading data file: /data/data15/seq_proc/10011010.006/screen_out_event.xsl
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :           29
 
    copy bad pix array...
cleaning chip #           0
cleaning chip #           1
cleaning chip #           2
cleaning chip #           3
 Hot pixels & counts                   :               0           0
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :           29
 Number of image cts rejected (N, %) :            0      0.0000000
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0           29
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0           29
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :           29
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!screen:ASCA > read events ad10011010s100412h.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-SIS1-BRIGHT2 > extract events
!screen:ASCA-SIS1-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT2 > save clean outfile=ad10011010s100412h.evt use_events=no
 Wrote cleaned events file to ad10011010s100412h.evt                                                                                                                                                                                                            
 
!screen:ASCA-SIS1-BRIGHT2 > exit save_session=no

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.31E+05   160068     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         160068     61640          61449     36979         0         0
 Writing events file
  61640 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        160068     61640          61449     36979         0         0
   in   11755.48 seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
       61640               60835               805
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!screen:ASCA > read events ad10011010g200170h.unf
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256_OFF.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad10011010g200170h.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       MEDIUM   14/04/93 05:16:28 0.26E+05   143441     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         143441     37503          56569     49369         0         0
 Writing events file
  37503 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        143441     37503          56569     49369         0         0
   in    7123.57 seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
       37503               36925               578
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!screen:ASCA > read events ad10011010g200270m.unf
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256_OFF.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad10011010g200270m.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       MEDIUM   14/04/93 06:40:12 0.16E+03      858     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200370m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
            858       168            453       237         0         0
 Writing events file
    168 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           858       168            453       237         0         0
   in      32.00 seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
         168                 162                 6
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!screen:ASCA > read events ad10011010g200370m.unf
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256_OFF.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad10011010g200370m.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.31E+05   158395     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         158395     61620          60059     36716         0         0
 Writing events file
  61620 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        158395     61620          60059     36716         0         0
   in   11747.48 seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
       61620               60918               702
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!screen:ASCA > read events ad10011010g300170h.unf
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256_OFF.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad10011010g300170h.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       MEDIUM   14/04/93 05:16:28 0.26E+05   141619     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         141619     36937          56486     48196         0         0
 Writing events file
  36937 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        141619     36937          56486     48196         0         0
   in    7123.57 seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
       36937               36522               415
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!screen:ASCA > read events ad10011010g300270m.unf
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256_OFF.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad10011010g300270m.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       MEDIUM   14/04/93 06:40:12 0.16E+03      796     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300370m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
            796       153            428       215         0         0
 Writing events file
    153 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           796       153            428       215         0         0
   in      32.00 seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
         153                 152                 1
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!screen:ASCA > read events ad10011010g300370m.unf
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256_OFF.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad10011010g300370m.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no

Generating images and exposure maps ( 21:24:22 )

-ANNULUS(128.5,128.5,192,81)
-ELLIPSE(167.5,220,24.66,28.95,245.298)

ASCAEXPO_V0.9b
 
    reading data file: ad10011010g200170h.evt
    reading   gti ext: STDGTI
    reading  cal file: gis2_ano_on_flf_180295.fits
    reading inst file: GIS2_REGION256_OFF.4_regionmap.tmp
 
    making an inst map...
     multiply inst map...
 
    reading att  file: ./fa930414_0420.0239
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       94.3601      22.6819      88.0132
 Mean   RA/DEC/ROLL :       94.3715      22.7089      88.0132
 Pnt    RA/DEC/ROLL :       94.2935      22.5944      88.0132
 
 Image rebin factor :             1
 Attitude Records   :         77431
 GTI intervals      :            32
 Total GTI (secs)   :     11755.480
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:        0.0000000       0.0000000
  10 Percent Complete: Total/live time:     1847.4938965    1847.4938965
  20 Percent Complete: Total/live time:     2508.9895020    2508.9895020
  30 Percent Complete: Total/live time:     4856.1884766    4856.1884766
  40 Percent Complete: Total/live time:     4856.1884766    4856.1884766
  50 Percent Complete: Total/live time:     8831.4873047    8831.4873047
  60 Percent Complete: Total/live time:     8831.4873047    8831.4873047
  70 Percent Complete: Total/live time:    10306.9824219   10306.9824219
  80 Percent Complete: Total/live time:    10306.9824219   10306.9824219
  90 Percent Complete: Total/live time:    11047.4794922   11047.4794922
 100 Percent Complete: Total/live time:    11755.4804688   11755.4804688
 
 Number of attitude steps  used:           31
 Number of attitude steps avail:        45261
 Mean RA/DEC pixel offset:      -10.1494      -2.4715
 
    writing expo file: ad10011010g200170h.expo
    closing attitude file...
    closing data file...

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] ad10011010g200170h
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.12E+05    60835     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          60835     60835              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         60835     60835              0         0         0         0
   in   11755.48 seconds
 Image            has    60835 counts for  5.175     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          60835     49747              0         0         0     11088
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         60835     49747              0         0         0     11088
   in   11755.48 seconds
 Image            has    49747 counts for  4.232     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          60835     11282              0         0         0     49553
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         60835     11282              0         0         0     49553
   in   11755.48 seconds
 Image            has    11282 counts for 0.9597     counts/sec
 Command not found; type ? for a command listing
!ad10011010g200170h:ASCA >
!ad10011010g200170h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!ad10011010g200170h:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!ad10011010g200170h:ASCA > read events ad10011010g200170h.evt
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!ad10011010g200170h:ASCA-GIS2-PH > set image sky
!ad10011010g200170h:ASCA-GIS2-PH > filter region corner_point.reg
!ad10011010g200170h:ASCA-GIS2-PH > extract image
!ad10011010g200170h:ASCA-GIS2-PH > save image outfile=ad10011010g200170h.img
Wrote image to file ad10011010g200170h.img
!ad10011010g200170h:ASCA-GIS2-PH > filter pha_cut 0 170
!ad10011010g200170h:ASCA-GIS2-PH > extract image
!ad10011010g200170h:ASCA-GIS2-PH > save image outfile=ad10011010g200170h_lo.img
Wrote image to file ad10011010g200170h_lo.img
!ad10011010g200170h:ASCA-GIS2-PH > clear pha_cut
!ad10011010g200170h:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad10011010g200170h:ASCA-GIS2-PH > extract image
!ad10011010g200170h:ASCA-GIS2-PH > save image outfile=ad10011010g200170h_hi.img
Wrote image to file ad10011010g200170h_hi.img
!ad10011010g200170h:ASCA-GIS2-PH > exit save_session=no

ASCAEXPO_V0.9b
 
    reading data file: ad10011010g200270m.evt
    reading   gti ext: STDGTI
    reading  cal file: gis2_ano_on_flf_180295.fits
    reading inst file: GIS2_REGION256_OFF.4_regionmap.tmp
 
    making an inst map...
     multiply inst map...
 
    reading att  file: ./fa930414_0420.0239
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       94.3601      22.6819      88.0113
 Mean   RA/DEC/ROLL :       94.3640      22.7067      88.0113
 Pnt    RA/DEC/ROLL :       94.3554      22.6482      88.0113
 
 Image rebin factor :             1
 Attitude Records   :         77431
 GTI intervals      :             9
 Total GTI (secs)   :      7123.568
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:        0.0000000       0.0000000
  10 Percent Complete: Total/live time:     2400.0000000    2400.0000000
  20 Percent Complete: Total/live time:     2400.0000000    2400.0000000
  30 Percent Complete: Total/live time:     2763.9006348    2763.9006348
  40 Percent Complete: Total/live time:     3223.8991699    3223.8991699
  50 Percent Complete: Total/live time:     4619.8940430    4619.8940430
  60 Percent Complete: Total/live time:     4619.8940430    4619.8940430
  70 Percent Complete: Total/live time:     5427.7470703    5427.7470703
  80 Percent Complete: Total/live time:     6979.5688477    6979.5688477
  90 Percent Complete: Total/live time:     6979.5688477    6979.5688477
 100 Percent Complete: Total/live time:     7123.5683594    7123.5683594
 
 Number of attitude steps  used:           14
 Number of attitude steps avail:         6441
 Mean RA/DEC pixel offset:       -8.9863      -2.3829
 
    writing expo file: ad10011010g200270m.expo
    closing attitude file...
    closing data file...

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] ad10011010g200270m
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       MEDIUM   14/04/93 05:16:28 0.71E+04    36925     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          36925     36925              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         36925     36925              0         0         0         0
   in    7123.57 seconds
 Image            has    36925 counts for  5.183     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          36925     30323              0         0         0      6602
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         36925     30323              0         0         0      6602
   in    7123.57 seconds
 Image            has    30323 counts for  4.257     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          36925      6731              0         0         0     30194
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         36925      6731              0         0         0     30194
   in    7123.57 seconds
 Image            has     6731 counts for 0.9449     counts/sec
 Command not found; type ? for a command listing
!ad10011010g200270m:ASCA >
!ad10011010g200270m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!ad10011010g200270m:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!ad10011010g200270m:ASCA > read events ad10011010g200270m.evt
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!ad10011010g200270m:ASCA-GIS2-PH > set image sky
!ad10011010g200270m:ASCA-GIS2-PH > filter region corner_point.reg
!ad10011010g200270m:ASCA-GIS2-PH > extract image
!ad10011010g200270m:ASCA-GIS2-PH > save image outfile=ad10011010g200270m.img
Wrote image to file ad10011010g200270m.img
!ad10011010g200270m:ASCA-GIS2-PH > filter pha_cut 0 170
!ad10011010g200270m:ASCA-GIS2-PH > extract image
!ad10011010g200270m:ASCA-GIS2-PH > save image outfile=ad10011010g200270m_lo.img
Wrote image to file ad10011010g200270m_lo.img
!ad10011010g200270m:ASCA-GIS2-PH > clear pha_cut
!ad10011010g200270m:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad10011010g200270m:ASCA-GIS2-PH > extract image
!ad10011010g200270m:ASCA-GIS2-PH > save image outfile=ad10011010g200270m_hi.img
Wrote image to file ad10011010g200270m_hi.img
!ad10011010g200270m:ASCA-GIS2-PH > exit save_session=no

ASCAEXPO_V0.9b
 
    reading data file: ad10011010g200370m.evt
    reading   gti ext: STDGTI
    reading  cal file: gis2_ano_on_flf_180295.fits
    reading inst file: GIS2_REGION256_OFF.4_regionmap.tmp
 
    making an inst map...
     multiply inst map...
 
    reading att  file: ./fa930414_0420.0239
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       94.3601      22.6819      88.0076
 Mean   RA/DEC/ROLL :       94.3609      22.7070      88.0076
 Pnt    RA/DEC/ROLL :       94.3591      22.6552      88.0076
 
 Image rebin factor :             1
 Attitude Records   :         77431
 GTI intervals      :             1
 Total GTI (secs)   :        32.000
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:        0.0000000       0.0000000
  10 Percent Complete: Total/live time:       15.9999561      15.9999561
  20 Percent Complete: Total/live time:       31.9999447      31.9999447
 100 Percent Complete: Total/live time:       31.9999447      31.9999447
 
 Number of attitude steps  used:            2
 Number of attitude steps avail:           26
 Mean RA/DEC pixel offset:       -5.2228      -0.5196
 
    writing expo file: ad10011010g200370m.expo
    closing attitude file...
    closing data file...

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] ad10011010g200370m
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       MEDIUM   14/04/93 06:40:12 0.32E+02      162     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            162       162              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           162       162              0         0         0         0
   in      32.00 seconds
 Image            has      162 counts for  5.063     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            162       122              0         0         0        40
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           162       122              0         0         0        40
   in      32.00 seconds
 Image            has      122 counts for  3.813     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            162        41              0         0         0       121
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           162        41              0         0         0       121
   in      32.00 seconds
 Image            has       41 counts for  1.281     counts/sec
 Command not found; type ? for a command listing
!ad10011010g200370m:ASCA >
!ad10011010g200370m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!ad10011010g200370m:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!ad10011010g200370m:ASCA > read events ad10011010g200370m.evt
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!ad10011010g200370m:ASCA-GIS2-PH > set image sky
!ad10011010g200370m:ASCA-GIS2-PH > filter region corner_point.reg
!ad10011010g200370m:ASCA-GIS2-PH > extract image
!ad10011010g200370m:ASCA-GIS2-PH > save image outfile=ad10011010g200370m.img
Wrote image to file ad10011010g200370m.img
!ad10011010g200370m:ASCA-GIS2-PH > filter pha_cut 0 170
!ad10011010g200370m:ASCA-GIS2-PH > extract image
!ad10011010g200370m:ASCA-GIS2-PH > save image outfile=ad10011010g200370m_lo.img
Wrote image to file ad10011010g200370m_lo.img
!ad10011010g200370m:ASCA-GIS2-PH > clear pha_cut
!ad10011010g200370m:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad10011010g200370m:ASCA-GIS2-PH > extract image
!ad10011010g200370m:ASCA-GIS2-PH > save image outfile=ad10011010g200370m_hi.img
Wrote image to file ad10011010g200370m_hi.img
!ad10011010g200370m:ASCA-GIS2-PH > exit save_session=no

-ANNULUS(128.5,128.5,192,73)
-ELLIPSE(217,95,21.56,25.92,169.216)

ASCAEXPO_V0.9b
 
    reading data file: ad10011010g300170h.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256_OFF.4_regionmap.tmp
 
    making an inst map...
     multiply inst map...
 
    reading att  file: ./fa930414_0420.0239
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       94.3601      22.6819      88.0118
 Mean   RA/DEC/ROLL :       94.3682      22.6845      88.0118
 Pnt    RA/DEC/ROLL :       94.2971      22.6191      88.0118
 
 Image rebin factor :             1
 Attitude Records   :         77431
 GTI intervals      :            34
 Total GTI (secs)   :     11747.480
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:        0.0000000       0.0000000
  10 Percent Complete: Total/live time:     1839.4940186    1839.4940186
  20 Percent Complete: Total/live time:     2500.9895020    2500.9895020
  30 Percent Complete: Total/live time:     4848.1884766    4848.1884766
  40 Percent Complete: Total/live time:     4848.1884766    4848.1884766
  50 Percent Complete: Total/live time:     8823.4873047    8823.4873047
  60 Percent Complete: Total/live time:     8823.4873047    8823.4873047
  70 Percent Complete: Total/live time:    10298.9824219   10298.9824219
  80 Percent Complete: Total/live time:    10298.9824219   10298.9824219
  90 Percent Complete: Total/live time:    11039.4794922   11039.4794922
 100 Percent Complete: Total/live time:    11747.4804688   11747.4804688
 
 Number of attitude steps  used:           31
 Number of attitude steps avail:        45261
 Mean RA/DEC pixel offset:        1.5396      -1.3103
 
    writing expo file: ad10011010g300170h.expo
    closing attitude file...
    closing data file...

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] ad10011010g300170h
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.12E+05    60918     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          60918     60918              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         60918     60918              0         0         0         0
   in   11747.48 seconds
 Image            has    60918 counts for  5.186     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          60918     50605              0         0         0     10313
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         60918     50605              0         0         0     10313
   in   11747.48 seconds
 Image            has    50605 counts for  4.308     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          60918     10540              0         0         0     50378
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         60918     10540              0         0         0     50378
   in   11747.48 seconds
 Image            has    10540 counts for 0.8972     counts/sec
 Command not found; type ? for a command listing
!ad10011010g300170h:ASCA >
!ad10011010g300170h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!ad10011010g300170h:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!ad10011010g300170h:ASCA > read events ad10011010g300170h.evt
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!ad10011010g300170h:ASCA-GIS3-PH > set image sky
!ad10011010g300170h:ASCA-GIS3-PH > filter region corner_point.reg
!ad10011010g300170h:ASCA-GIS3-PH > extract image
!ad10011010g300170h:ASCA-GIS3-PH > save image outfile=ad10011010g300170h.img
Wrote image to file ad10011010g300170h.img
!ad10011010g300170h:ASCA-GIS3-PH > filter pha_cut 0 170
!ad10011010g300170h:ASCA-GIS3-PH > extract image
!ad10011010g300170h:ASCA-GIS3-PH > save image outfile=ad10011010g300170h_lo.img
Wrote image to file ad10011010g300170h_lo.img
!ad10011010g300170h:ASCA-GIS3-PH > clear pha_cut
!ad10011010g300170h:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad10011010g300170h:ASCA-GIS3-PH > extract image
!ad10011010g300170h:ASCA-GIS3-PH > save image outfile=ad10011010g300170h_hi.img
Wrote image to file ad10011010g300170h_hi.img
!ad10011010g300170h:ASCA-GIS3-PH > exit save_session=no

ASCAEXPO_V0.9b
 
    reading data file: ad10011010g300270m.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256_OFF.4_regionmap.tmp
 
    making an inst map...
     multiply inst map...
 
    reading att  file: ./fa930414_0420.0239
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       94.3601      22.6819      88.0100
 Mean   RA/DEC/ROLL :       94.3604      22.6820      88.0100
 Pnt    RA/DEC/ROLL :       94.3590      22.6728      88.0100
 
 Image rebin factor :             1
 Attitude Records   :         77431
 GTI intervals      :             9
 Total GTI (secs)   :      7123.568
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:        0.0000000       0.0000000
  10 Percent Complete: Total/live time:     2400.0000000    2400.0000000
  20 Percent Complete: Total/live time:     2400.0000000    2400.0000000
  30 Percent Complete: Total/live time:     2763.9006348    2763.9006348
  40 Percent Complete: Total/live time:     3223.8991699    3223.8991699
  50 Percent Complete: Total/live time:     4619.8940430    4619.8940430
  60 Percent Complete: Total/live time:     4619.8940430    4619.8940430
  70 Percent Complete: Total/live time:     5427.7470703    5427.7470703
  80 Percent Complete: Total/live time:     6979.5688477    6979.5688477
  90 Percent Complete: Total/live time:     6979.5688477    6979.5688477
 100 Percent Complete: Total/live time:     7123.5683594    7123.5683594
 
 Number of attitude steps  used:           14
 Number of attitude steps avail:         6441
 Mean RA/DEC pixel offset:        2.2296      -1.2687
 
    writing expo file: ad10011010g300270m.expo
    closing attitude file...
    closing data file...

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] ad10011010g300270m
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       MEDIUM   14/04/93 05:16:28 0.71E+04    36522     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          36522     36522              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         36522     36522              0         0         0         0
   in    7123.57 seconds
 Image            has    36522 counts for  5.127     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          36522     30441              0         0         0      6081
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         36522     30441              0         0         0      6081
   in    7123.57 seconds
 Image            has    30441 counts for  4.273     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          36522      6201              0         0         0     30321
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         36522      6201              0         0         0     30321
   in    7123.57 seconds
 Image            has     6201 counts for 0.8705     counts/sec
 Command not found; type ? for a command listing
!ad10011010g300270m:ASCA >
!ad10011010g300270m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!ad10011010g300270m:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!ad10011010g300270m:ASCA > read events ad10011010g300270m.evt
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!ad10011010g300270m:ASCA-GIS3-PH > set image sky
!ad10011010g300270m:ASCA-GIS3-PH > filter region corner_point.reg
!ad10011010g300270m:ASCA-GIS3-PH > extract image
!ad10011010g300270m:ASCA-GIS3-PH > save image outfile=ad10011010g300270m.img
Wrote image to file ad10011010g300270m.img
!ad10011010g300270m:ASCA-GIS3-PH > filter pha_cut 0 170
!ad10011010g300270m:ASCA-GIS3-PH > extract image
!ad10011010g300270m:ASCA-GIS3-PH > save image outfile=ad10011010g300270m_lo.img
Wrote image to file ad10011010g300270m_lo.img
!ad10011010g300270m:ASCA-GIS3-PH > clear pha_cut
!ad10011010g300270m:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad10011010g300270m:ASCA-GIS3-PH > extract image
!ad10011010g300270m:ASCA-GIS3-PH > save image outfile=ad10011010g300270m_hi.img
Wrote image to file ad10011010g300270m_hi.img
!ad10011010g300270m:ASCA-GIS3-PH > exit save_session=no

ASCAEXPO_V0.9b
 
    reading data file: ad10011010g300370m.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256_OFF.4_regionmap.tmp
 
    making an inst map...
     multiply inst map...
 
    reading att  file: ./fa930414_0420.0239
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       94.3601      22.6819      88.0062
 Mean   RA/DEC/ROLL :       94.3573      22.6825      88.0062
 Pnt    RA/DEC/ROLL :       94.3627      22.6798      88.0062
 
 Image rebin factor :             1
 Attitude Records   :         77431
 GTI intervals      :             1
 Total GTI (secs)   :        32.000
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:        0.0000000       0.0000000
  10 Percent Complete: Total/live time:       15.9999561      15.9999561
  20 Percent Complete: Total/live time:       31.9999447      31.9999447
 100 Percent Complete: Total/live time:       31.9999447      31.9999447
 
 Number of attitude steps  used:            2
 Number of attitude steps avail:           26
 Mean RA/DEC pixel offset:        0.8165       0.0804
 
    writing expo file: ad10011010g300370m.expo
    closing attitude file...
    closing data file...

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] ad10011010g300370m
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       MEDIUM   14/04/93 06:40:12 0.32E+02      152     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            152       152              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           152       152              0         0         0         0
   in      32.00 seconds
 Image            has      152 counts for  4.750     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            152       130              0         0         0        22
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           152       130              0         0         0        22
   in      32.00 seconds
 Image            has      130 counts for  4.063     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            152        23              0         0         0       129
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           152        23              0         0         0       129
   in      32.00 seconds
 Image            has       23 counts for 0.7188     counts/sec
 Command not found; type ? for a command listing
!ad10011010g300370m:ASCA >
!ad10011010g300370m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!ad10011010g300370m:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!ad10011010g300370m:ASCA > read events ad10011010g300370m.evt
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!ad10011010g300370m:ASCA-GIS3-PH > set image sky
!ad10011010g300370m:ASCA-GIS3-PH > filter region corner_point.reg
!ad10011010g300370m:ASCA-GIS3-PH > extract image
!ad10011010g300370m:ASCA-GIS3-PH > save image outfile=ad10011010g300370m.img
Wrote image to file ad10011010g300370m.img
!ad10011010g300370m:ASCA-GIS3-PH > filter pha_cut 0 170
!ad10011010g300370m:ASCA-GIS3-PH > extract image
!ad10011010g300370m:ASCA-GIS3-PH > save image outfile=ad10011010g300370m_lo.img
Wrote image to file ad10011010g300370m_lo.img
!ad10011010g300370m:ASCA-GIS3-PH > clear pha_cut
!ad10011010g300370m:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad10011010g300370m:ASCA-GIS3-PH > extract image
!ad10011010g300370m:ASCA-GIS3-PH > save image outfile=ad10011010g300370m_hi.img
Wrote image to file ad10011010g300370m_hi.img
!ad10011010g300370m:ASCA-GIS3-PH > exit save_session=no

ASCAEXPO_V0.9b
 
    reading data file: ad10011010s000102h.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s0_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:           ON          ON          ON          ON
 AREA DISC  IN/OUT:           IN          IN          IN          IN
 AREA DISC H START:            6           6         321           6
 AREA DISC H  STOP:            7         100         425           7
 AREA DISC V START:            2         252         354           2
 AREA DISC V  STOP:            3         422         422           3
  
    reading att  file: ./fa930414_0420.0239
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       94.3601      22.6819      88.0169
 Mean   RA/DEC/ROLL :       94.3815      22.6908      88.0169
 Pnt    RA/DEC/ROLL :       94.3396      22.6580      88.0169
 
 Image rebin factor :             4
 Attitude Records   :         77431
 Hot Pixels         :           342
 GTI intervals      :            37
 Total GTI (secs)   :      9591.021
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:        0.0000000       0.0000000
  10 Percent Complete: Total/live time:     1425.1372070    1425.1372070
  20 Percent Complete: Total/live time:     2021.6015625    2021.6015625
  30 Percent Complete: Total/live time:     3931.6176758    3931.6176758
  40 Percent Complete: Total/live time:     5979.6176758    5979.6176758
  50 Percent Complete: Total/live time:     5979.6176758    5979.6176758
  60 Percent Complete: Total/live time:     9337.3378906    9337.3378906
  70 Percent Complete: Total/live time:     9337.3378906    9337.3378906
  80 Percent Complete: Total/live time:     9591.0205078    9591.0205078
 100 Percent Complete: Total/live time:     9591.0205078    9591.0205078
 
 Number of attitude steps  used:           20
 Number of attitude steps avail:        35802
 Mean RA/DEC pixel offset:      -40.9417     -75.5441
 
    writing expo file: ad10011010s000102h.expo
    closing attitude file...
    closing data file...

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] ad10011010s000102h
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 IC443    BRIGHT   HIGH     14/04/93 06:25:04 0.96E+04    74910 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          74910     74910              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         74910     74910              0         0         0         0
   in    9591.02 seconds
 Image            has    74910 counts for  7.810     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          74910     67642              0         0         0      7268
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         74910     67642              0         0         0      7268
   in    9591.02 seconds
 Image            has    67642 counts for  7.053     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          74910      7345              0         0         0     67565
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         74910      7345              0         0         0     67565
   in    9591.02 seconds
 Image            has     7345 counts for 0.7658     counts/sec
 Command not found; type ? for a command listing
!ad10011010s000102h:ASCA >
!ad10011010s000102h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!ad10011010s000102h:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!ad10011010s000102h:ASCA > read events ad10011010s000102h.evt
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!ad10011010s000102h:ASCA-SIS0-BRIGHT > set image sky
!ad10011010s000102h:ASCA-SIS0-BRIGHT > filter region corner_point.reg
!ad10011010s000102h:ASCA-SIS0-BRIGHT > extract image
!ad10011010s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad10011010s000102h.img
Wrote image to file ad10011010s000102h.img
!ad10011010s000102h:ASCA-SIS0-BRIGHT > filter pha_cut 0 547
!ad10011010s000102h:ASCA-SIS0-BRIGHT > extract image
!ad10011010s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad10011010s000102h_lo.img
Wrote image to file ad10011010s000102h_lo.img
!ad10011010s000102h:ASCA-SIS0-BRIGHT > clear pha_cut
!ad10011010s000102h:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad10011010s000102h:ASCA-SIS0-BRIGHT > extract image
!ad10011010s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad10011010s000102h_hi.img
Wrote image to file ad10011010s000102h_hi.img
!ad10011010s000102h:ASCA-SIS0-BRIGHT > exit save_session=no

ASCAEXPO_V0.9b
 
    reading data file: ad10011010s000202m.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s0_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:           ON          ON          ON          ON
 AREA DISC  IN/OUT:           IN          IN          IN          IN
 AREA DISC H START:            6           6         321           6
 AREA DISC H  STOP:            7         100         425           7
 AREA DISC V START:            2         252         354           2
 AREA DISC V  STOP:            3         422         422           3
  
    reading att  file: ./fa930414_0420.0239
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       94.3601      22.6819      88.0171
 Mean   RA/DEC/ROLL :       94.3794      22.6928      88.0171
 Pnt    RA/DEC/ROLL :       94.3402      22.6618      88.0171
 
 Image rebin factor :             4
 Attitude Records   :         77431
 Hot Pixels         :           318
 GTI intervals      :            13
 Total GTI (secs)   :      7730.663
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:        0.0000000       0.0000000
  10 Percent Complete: Total/live time:     1952.0690918    1952.0690918
  20 Percent Complete: Total/live time:     1952.0690918    1952.0690918
  30 Percent Complete: Total/live time:     4113.7089844    4113.7089844
  40 Percent Complete: Total/live time:     4113.7089844    4113.7089844
  50 Percent Complete: Total/live time:     4117.5678711    4117.5678711
  60 Percent Complete: Total/live time:     5137.7089844    5137.7089844
  70 Percent Complete: Total/live time:     5809.7089844    5809.7089844
  80 Percent Complete: Total/live time:     7089.7089844    7089.7089844
  90 Percent Complete: Total/live time:     7089.7089844    7089.7089844
 100 Percent Complete: Total/live time:     7730.6625977    7730.6625977
 
 Number of attitude steps  used:           16
 Number of attitude steps avail:        11788
 Mean RA/DEC pixel offset:      -34.5806     -84.3960
 
    writing expo file: ad10011010s000202m.expo
    closing attitude file...
    closing data file...

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] ad10011010s000202m
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 IC443    BRIGHT   MEDIUM   14/04/93 05:09:00 0.77E+04    59639 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          59639     59639              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         59639     59639              0         0         0         0
   in    7730.66 seconds
 Image            has    59639 counts for  7.715     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          59639     54144              0         0         0      5495
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         59639     54144              0         0         0      5495
   in    7730.66 seconds
 Image            has    54144 counts for  7.004     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          59639      5552              0         0         0     54087
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         59639      5552              0         0         0     54087
   in    7730.66 seconds
 Image            has     5552 counts for 0.7182     counts/sec
 Command not found; type ? for a command listing
!ad10011010s000202m:ASCA >
!ad10011010s000202m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!ad10011010s000202m:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!ad10011010s000202m:ASCA > read events ad10011010s000202m.evt
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!ad10011010s000202m:ASCA-SIS0-BRIGHT > set image sky
!ad10011010s000202m:ASCA-SIS0-BRIGHT > filter region corner_point.reg
!ad10011010s000202m:ASCA-SIS0-BRIGHT > extract image
!ad10011010s000202m:ASCA-SIS0-BRIGHT > save image outfile=ad10011010s000202m.img
Wrote image to file ad10011010s000202m.img
!ad10011010s000202m:ASCA-SIS0-BRIGHT > filter pha_cut 0 547
!ad10011010s000202m:ASCA-SIS0-BRIGHT > extract image
!ad10011010s000202m:ASCA-SIS0-BRIGHT > save image outfile=ad10011010s000202m_lo.img
Wrote image to file ad10011010s000202m_lo.img
!ad10011010s000202m:ASCA-SIS0-BRIGHT > clear pha_cut
!ad10011010s000202m:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad10011010s000202m:ASCA-SIS0-BRIGHT > extract image
!ad10011010s000202m:ASCA-SIS0-BRIGHT > save image outfile=ad10011010s000202m_hi.img
Wrote image to file ad10011010s000202m_hi.img
!ad10011010s000202m:ASCA-SIS0-BRIGHT > exit save_session=no

ASCAEXPO_V0.9b
 
    reading data file: ad10011010s100102h.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s1_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:           ON          ON          ON          ON
 AREA DISC  IN/OUT:           IN          IN          IN          IN
 AREA DISC H START:          376           6           6           6
 AREA DISC H  STOP:          425           7           7          45
 AREA DISC V START:          410           2           2         308
 AREA DISC V  STOP:          422           3           3         422
  
    reading att  file: ./fa930414_0420.0239
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       94.3601      22.6819      88.0103
 Mean   RA/DEC/ROLL :       94.3645      22.6922      88.0103
 Pnt    RA/DEC/ROLL :       94.3567      22.6564      88.0103
 
 Image rebin factor :             4
 Attitude Records   :         77431
 Hot Pixels         :           343
 GTI intervals      :            48
 Total GTI (secs)   :     11603.151
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:        0.0000000       0.0000000
  10 Percent Complete: Total/live time:     2055.6213379    2055.6213379
  20 Percent Complete: Total/live time:     2441.4316406    2441.4316406
  30 Percent Complete: Total/live time:     4303.5371094    4303.5371094
  40 Percent Complete: Total/live time:     5615.5371094    5615.5371094
  50 Percent Complete: Total/live time:     8920.9687500    8920.9687500
  60 Percent Complete: Total/live time:     8920.9687500    8920.9687500
  70 Percent Complete: Total/live time:     9353.4355469    9353.4355469
  80 Percent Complete: Total/live time:    11100.8974609   11100.8974609
  90 Percent Complete: Total/live time:    11100.8974609   11100.8974609
 100 Percent Complete: Total/live time:    11603.1494141   11603.1494141
 
 Number of attitude steps  used:           19
 Number of attitude steps avail:        39842
 Mean RA/DEC pixel offset:      -44.0749     -11.5797
 
    writing expo file: ad10011010s100102h.expo
    closing attitude file...
    closing data file...

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] ad10011010s100102h
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT   HIGH     14/04/93 06:25:04 0.12E+05    98329 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          98329     98329              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         98329     98329              0         0         0         0
   in   11603.15 seconds
 Image            has    98329 counts for  8.474     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          98329     88679              0         0         0      9650
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         98329     88679              0         0         0      9650
   in   11603.15 seconds
 Image            has    88679 counts for  7.643     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          98329      9747              0         0         0     88582
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         98329      9747              0         0         0     88582
   in   11603.15 seconds
 Image            has     9747 counts for 0.8400     counts/sec
 Command not found; type ? for a command listing
!ad10011010s100102h:ASCA >
!ad10011010s100102h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!ad10011010s100102h:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!ad10011010s100102h:ASCA > read events ad10011010s100102h.evt
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!ad10011010s100102h:ASCA-SIS1-BRIGHT > set image sky
!ad10011010s100102h:ASCA-SIS1-BRIGHT > filter region corner_point.reg
!ad10011010s100102h:ASCA-SIS1-BRIGHT > extract image
!ad10011010s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad10011010s100102h.img
Wrote image to file ad10011010s100102h.img
!ad10011010s100102h:ASCA-SIS1-BRIGHT > filter pha_cut 0 547
!ad10011010s100102h:ASCA-SIS1-BRIGHT > extract image
!ad10011010s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad10011010s100102h_lo.img
Wrote image to file ad10011010s100102h_lo.img
!ad10011010s100102h:ASCA-SIS1-BRIGHT > clear pha_cut
!ad10011010s100102h:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad10011010s100102h:ASCA-SIS1-BRIGHT > extract image
!ad10011010s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad10011010s100102h_hi.img
Wrote image to file ad10011010s100102h_hi.img
!ad10011010s100102h:ASCA-SIS1-BRIGHT > exit save_session=no

ASCAEXPO_V0.9b
 
    reading data file: ad10011010s100202m.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s1_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:           ON          ON          ON          ON
 AREA DISC  IN/OUT:           IN          IN          IN          IN
 AREA DISC H START:          376           6           6           6
 AREA DISC H  STOP:          425           7           7          45
 AREA DISC V START:          410           2           2         308
 AREA DISC V  STOP:          422           3           3         422
  
    reading att  file: ./fa930414_0420.0239
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       94.3601      22.6819      88.0105
 Mean   RA/DEC/ROLL :       94.3623      22.6944      88.0105
 Pnt    RA/DEC/ROLL :       94.3574      22.6602      88.0105
 
 Image rebin factor :             4
 Attitude Records   :         77431
 Hot Pixels         :           311
 GTI intervals      :            15
 Total GTI (secs)   :      7914.663
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:        0.0000000       0.0000000
  10 Percent Complete: Total/live time:     2144.0690918    2144.0690918
  20 Percent Complete: Total/live time:     2144.0690918    2144.0690918
  30 Percent Complete: Total/live time:     2775.9682617    2775.9682617
  40 Percent Complete: Total/live time:     4171.9633789    4171.9633789
  50 Percent Complete: Total/live time:     4171.9633789    4171.9633789
  60 Percent Complete: Total/live time:     5361.7089844    5361.7089844
  70 Percent Complete: Total/live time:     6001.7089844    6001.7089844
  80 Percent Complete: Total/live time:     6525.5263672    6525.5263672
  90 Percent Complete: Total/live time:     7313.7089844    7313.7089844
 100 Percent Complete: Total/live time:     7914.6625977    7914.6625977
 
 Number of attitude steps  used:           23
 Number of attitude steps avail:        19211
 Mean RA/DEC pixel offset:      -37.4894     -15.8402
 
    writing expo file: ad10011010s100202m.expo
    closing attitude file...
    closing data file...

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] ad10011010s100202m
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT   MEDIUM   14/04/93 05:09:00 0.79E+04    67768 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          67768     67768              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         67768     67768              0         0         0         0
   in    7914.66 seconds
 Image            has    67768 counts for  8.562     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          67768     61302              0         0         0      6466
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         67768     61302              0         0         0      6466
   in    7914.66 seconds
 Image            has    61302 counts for  7.745     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          67768      6525              0         0         0     61243
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         67768      6525              0         0         0     61243
   in    7914.66 seconds
 Image            has     6525 counts for 0.8244     counts/sec
 Command not found; type ? for a command listing
!ad10011010s100202m:ASCA >
!ad10011010s100202m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!ad10011010s100202m:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!ad10011010s100202m:ASCA > read events ad10011010s100202m.evt
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!ad10011010s100202m:ASCA-SIS1-BRIGHT > set image sky
!ad10011010s100202m:ASCA-SIS1-BRIGHT > filter region corner_point.reg
!ad10011010s100202m:ASCA-SIS1-BRIGHT > extract image
!ad10011010s100202m:ASCA-SIS1-BRIGHT > save image outfile=ad10011010s100202m.img
Wrote image to file ad10011010s100202m.img
!ad10011010s100202m:ASCA-SIS1-BRIGHT > filter pha_cut 0 547
!ad10011010s100202m:ASCA-SIS1-BRIGHT > extract image
!ad10011010s100202m:ASCA-SIS1-BRIGHT > save image outfile=ad10011010s100202m_lo.img
Wrote image to file ad10011010s100202m_lo.img
!ad10011010s100202m:ASCA-SIS1-BRIGHT > clear pha_cut
!ad10011010s100202m:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad10011010s100202m:ASCA-SIS1-BRIGHT > extract image
!ad10011010s100202m:ASCA-SIS1-BRIGHT > save image outfile=ad10011010s100202m_hi.img
Wrote image to file ad10011010s100202m_hi.img
!ad10011010s100202m:ASCA-SIS1-BRIGHT > exit save_session=no

ASCAEXPO_V0.9b
 
    reading data file: ad10011010s100402h.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s1_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:           ON          ON          ON          ON
 AREA DISC  IN/OUT:           IN          IN          IN          IN
 AREA DISC H START:          376           6           6           6
 AREA DISC H  STOP:          425           7           7          45
 AREA DISC V START:          410           2           2         308
 AREA DISC V  STOP:          422           3           3         422
  
    reading att  file: ./fa930414_0420.0239
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       94.3601      22.6819      88.0069
 Mean   RA/DEC/ROLL :       94.3604      22.6937      88.0069
 Pnt    RA/DEC/ROLL :       94.3606      22.6667      88.0069
 
 Image rebin factor :             4
 Attitude Records   :         77431
 Hot Pixels         :             0
 GTI intervals      :             1
 Total GTI (secs)   :         1.969
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:        0.0000000       0.0000000
  10 Percent Complete: Total/live time:        0.4999249       0.4999249
  20 Percent Complete: Total/live time:        1.9687500       1.9687500
 100 Percent Complete: Total/live time:        1.9687500       1.9687500
 
 Number of attitude steps  used:            2
 Number of attitude steps avail:          152
 Mean RA/DEC pixel offset:      -33.0601       6.1885
 
    writing expo file: ad10011010s100402h.expo
    closing attitude file...
    closing data file...

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] ad10011010s100402h
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT   HIGH     14/04/93 08:06:08 0.20E+01       29 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s100402h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             29        29              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
            29        29              0         0         0         0
   in       1.97 seconds
 Image            has       29 counts for  14.73     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s100402h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             29        27              0         0         0         2
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
            29        27              0         0         0         2
   in       1.97 seconds
 Image            has       27 counts for  13.71     counts/sec
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s100402h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             29         2              0         0         0        27
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
            29         2              0         0         0        27
   in       1.97 seconds
 Image            has        2 counts for  1.016     counts/sec
 Command not found; type ? for a command listing
!ad10011010s100402h:ASCA >
!ad10011010s100402h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!ad10011010s100402h:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!ad10011010s100402h:ASCA > read events ad10011010s100402h.evt
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!ad10011010s100402h:ASCA-SIS1-BRIGHT > set image sky
!ad10011010s100402h:ASCA-SIS1-BRIGHT > filter region corner_point.reg
!ad10011010s100402h:ASCA-SIS1-BRIGHT > extract image
!ad10011010s100402h:ASCA-SIS1-BRIGHT > save image outfile=ad10011010s100402h.img
Wrote image to file ad10011010s100402h.img
!ad10011010s100402h:ASCA-SIS1-BRIGHT > filter pha_cut 0 547
!ad10011010s100402h:ASCA-SIS1-BRIGHT > extract image
!ad10011010s100402h:ASCA-SIS1-BRIGHT > save image outfile=ad10011010s100402h_lo.img
Wrote image to file ad10011010s100402h_lo.img
!ad10011010s100402h:ASCA-SIS1-BRIGHT > clear pha_cut
!ad10011010s100402h:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad10011010s100402h:ASCA-SIS1-BRIGHT > extract image
!ad10011010s100402h:ASCA-SIS1-BRIGHT > save image outfile=ad10011010s100402h_hi.img
Wrote image to file ad10011010s100402h_hi.img
!ad10011010s100402h:ASCA-SIS1-BRIGHT > exit save_session=no

ad10011010s000102h.expo
ad10011010s000202m.expo
ad10011010s100102h.expo
ad10011010s100202m.expo
ad10011010s100402h.expo

ad10011010s000102h.img
ad10011010s000202m.img
ad10011010s100102h.img
ad10011010s100202m.img
ad10011010s100402h.img

ad10011010s000102h_lo.img
ad10011010s000202m_lo.img
ad10011010s100102h_lo.img
ad10011010s100202m_lo.img
ad10011010s100402h_lo.img

ad10011010s000102h_hi.img
ad10011010s000202m_hi.img
ad10011010s100102h_hi.img
ad10011010s100202m_hi.img
ad10011010s100402h_hi.img

 No of detectors read in:   20
![1]XIMAGE> read/fits ad10011010sis32002_all.totsky
 Reading an image
 Telescope ASCA SIS0
  Image display size =  320
 Done, closing file
  Largest, Smallest    37.0000  0.
  Bscale, Bzero from file     1.0000000000000  0.
After internal scaling
  Bscale and Bzero    1.0000000000000  0.
 Image level, max:  37 min:  0
![2]XIMAGE> read/exp_map ad10011010sis32002.totexpo
 Reading an image
 Telescope ASCA SIS0
  Image display size =  320
 Done, closing file
  Largest, Smallest    614.024  0.
  Bscale, Bzero from file     1.0000000000000  0.
After internal scaling
  Bscale and Bzero    1.0000000000000  0.
 Image level, max:  614 min:  0
![3]XIMAGE> smooth
![4]XIMAGE> cpd /ppm
![5]XIMAGE> cey 2000
![6]XIMAGE> disp/correct/noframe
 Displaying image
 The image is exposure corrected
  Min =  0 max =   32767
![7]XIMAGE> grid
![8]XIMAGE> scale
 scal_f, min_inten    1.00000  0.
 i,inten,mm,pp  1  0.  0  0
 i,inten,mm,pp  2    5.00000  50  -1
 i,inten,mm,pp  3    9.00000  90  -1
 i,inten,mm,pp  4    18.0000  18  0
![9]XIMAGE> exit

ad10011010g200170h.expo
ad10011010g200270m.expo
ad10011010g200370m.expo
ad10011010g300170h.expo
ad10011010g300270m.expo
ad10011010g300370m.expo

ad10011010g200170h.img
ad10011010g200270m.img
ad10011010g200370m.img
ad10011010g300170h.img
ad10011010g300270m.img
ad10011010g300370m.img

ad10011010g200170h_lo.img
ad10011010g200270m_lo.img
ad10011010g200370m_lo.img
ad10011010g300170h_lo.img
ad10011010g300270m_lo.img
ad10011010g300370m_lo.img

ad10011010g200170h_hi.img
ad10011010g200270m_hi.img
ad10011010g200370m_hi.img
ad10011010g300170h_hi.img
ad10011010g300270m_hi.img
ad10011010g300370m_hi.img

 No of detectors read in:   20
![1]XIMAGE> read/fits ad10011010gis25670_all.totsky
 Reading an image
 Telescope ASCA GIS2
  Image display size =  256
 Done, closing file
  Largest, Smallest    70.0000  0.
  Bscale, Bzero from file     1.0000000000000  0.
After internal scaling
  Bscale and Bzero    1.0000000000000  0.
 Image level, max:  70 min:  0
![2]XIMAGE> read/exp_map ad10011010gis25670.totexpo
 Reading an image
 Telescope ASCA GIS2
  Image display size =  256
 Done, closing file
  Largest, Smallest    630.235  0.
  Bscale, Bzero from file     1.0000000000000  0.
After internal scaling
  Bscale and Bzero    1.0000000000000  0.
 Image level, max:  630 min:  0
![3]XIMAGE> smooth
![4]XIMAGE> cpd /ppm
![5]XIMAGE> cey 2000
![6]XIMAGE> disp/correct/noframe
 Displaying image
 The image is exposure corrected
  Min =  0 max =   32767
![7]XIMAGE> grid
![8]XIMAGE> scale
 scal_f, min_inten    1.00000  0.
 i,inten,mm,pp  1  0.  0  0
 i,inten,mm,pp  2    4.00000  40  -1
 i,inten,mm,pp  3    11.0000  11  0
 i,inten,mm,pp  4    23.0000  23  0
![9]XIMAGE> exit

Detecting sources in summed images ( 21:51:27 )

145 144 0.00137221 105 39 24.6049

146 143 0.000287958 105 36 18.1598

144 144 0.00112539 105 39 26.7119

145 144 39 T

color plane 0
color plane 1
color plane 2
writing image
image written

170 190 0.000576471 181 102 15.1751

192 166 8.14311e-05 178 80 17.3315

188 182 0.000521962 186 102 17.0976

170 190 102 T

color plane 0
color plane 1
color plane 2
writing image
image written

 The sum of the selected column is                   6398272.0
 The mean of the selected column is                  504.35693
 The standard deviation of the selected column is    48.445502
 The minimum of selected column is                   391.00000
 The maximum of selected column is                   609.00000
 The number of points used in calculation is            12686

 The sum of the selected column is                   8168666.0
 The mean of the selected column is                  643.91187
 The standard deviation of the selected column is    55.029576
 The minimum of selected column is                   531.00000
 The maximum of selected column is                   752.00000
 The number of points used in calculation is            12686

 The sum of the selected column is                   6010.0000
 The mean of the selected column is                  500.83333
 The standard deviation of the selected column is    1.8989630
 The minimum of selected column is                   497.00000
 The maximum of selected column is                   504.00000
 The number of points used in calculation is               12

 The sum of the selected column is                   8060.0000
 The mean of the selected column is                  671.66667
 The standard deviation of the selected column is    4.4175957
 The minimum of selected column is                   668.00000
 The maximum of selected column is                   682.00000
 The number of points used in calculation is               12

 The sum of the selected column is                   37118.000
 The mean of the selected column is                  109.49263
 The standard deviation of the selected column is    1.1444897
 The minimum of selected column is                   107.00000
 The maximum of selected column is                   112.00000
 The number of points used in calculation is              339

 The sum of the selected column is                   48817.000
 The mean of the selected column is                  144.00295
 The standard deviation of the selected column is    1.2271546
 The minimum of selected column is                   141.00000
 The maximum of selected column is                   147.00000
 The number of points used in calculation is              339

 The sum of the selected column is                   48888.000
 The mean of the selected column is                  115.57447
 The standard deviation of the selected column is    1.1472244
 The minimum of selected column is                   113.00000
 The maximum of selected column is                   118.00000
 The number of points used in calculation is              423

 The sum of the selected column is                   61257.000
 The mean of the selected column is                  144.81560
 The standard deviation of the selected column is    1.2577881
 The minimum of selected column is                   141.00000
 The maximum of selected column is                   148.00000
 The number of points used in calculation is              423

Extracting spectra and generating response matrices ( 22:04:59 )

1 ad10011010s000102h.evt 134549
1 ad10011010s000202m.evt 134549

ad10011010s000102h.evt
ad10011010s000202m.evt

1 ad10011010s000112h.evt 75932

ad10011010s000112h.evt

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 IC443    BRIGHT2  HIGH     14/04/93 06:25:04 0.96E+04    75932 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s000112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          75932     60905          15027         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         75932     60905          15027         0         0         0
   in    9591.02 seconds
 Spectrum         has    60905 counts for  6.350     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 9591.0          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.27485         Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      25  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10011010s010112_1.pi
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s000112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          75932     60905          15027         0         0         0
 Writing events file
  60905 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         75932     60905          15027         0         0         0
   in    9591.02 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events ad10011010s000112h.evt
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-SIS0-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad10011010s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_OFFCHIP.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad10011010s010112.discrim
!xsel:ASCA-SIS0-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS0-BRIGHT2 > save spectrum ad10011010s010112_1.pi group=yes
Wrote spectrum to ad10011010s010112_1.pi
!xsel:ASCA-SIS0-BRIGHT2 > extract events
!xsel:ASCA-SIS0-BRIGHT2 > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data15/seq_proc/10011010.006/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 9591.0          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.27485         Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      25  of undefined grouping (Channel quality=bad)
 ...        26 -      33  are grouped by a factor        2
 ...        34 -     158  are single channels
 ...       159 -     160  are grouped by a factor        2
 ...       161 -     184  are single channels
 ...       185 -     196  are grouped by a factor        2
 ...       197 -     197  are single channels
 ...       198 -     219  are grouped by a factor        2
 ...       220 -     222  are grouped by a factor        3
 ...       223 -     224  are grouped by a factor        2
 ...       225 -     242  are grouped by a factor        3
 ...       243 -     244  are grouped by a factor        2
 ...       245 -     248  are grouped by a factor        4
 ...       249 -     273  are grouped by a factor        5
 ...       274 -     280  are grouped by a factor        7
 ...       281 -     288  are grouped by a factor        8
 ...       289 -     314  are grouped by a factor       13
 ...       315 -     330  are grouped by a factor       16
 ...       331 -     362  are grouped by a factor       32
 ...       363 -     402  are grouped by a factor       40
 ...       403 -     480  are grouped by a factor       78
 ...       481 -     564  are grouped by a factor       84
 ...       565 -     764  are grouped by a factor      200
 ...       765 -     866  are grouped by a factor      102
 ...       867 -     923  are grouped by a factor       57
 ...       924 -     936  are grouped by a factor       13
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10011010s010112_1.pi
 ** grppha 2.6.0 completed successfully

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 IC443    BRIGHT2  HIGH     14/04/93 06:25:04 0.96E+04    60905 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
          60905     25675          35230         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         60905     25675          35230         0         0         0
   in    9591.02 seconds
 Spectrum         has    25675 counts for  2.677     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 9591.0          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 9.58203E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      25  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec0.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events events.tmp
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-SIS0-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad10011010s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_OFFCHIP.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad10011010s010112.discrim
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP1.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS0-BRIGHT2 > save spectrum spec0.tmp group=yes
Wrote spectrum to spec0.tmp
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x1024 S0C0 Bright2 PI RMF
Calibration data from ./
Please stand by...
...Done.

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 IC443    BRIGHT2  HIGH     14/04/93 06:25:04 0.96E+04    60905 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
          60905     17921          42984         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         60905     17921          42984         0         0         0
   in    9591.02 seconds
 Spectrum         has    17921 counts for  1.869     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 9591.0          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 9.03613E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      25  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec1.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events events.tmp
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-SIS0-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad10011010s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_OFFCHIP.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad10011010s010112.discrim
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP0.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS0-BRIGHT2 > save spectrum spec1.tmp group=yes
Wrote spectrum to spec1.tmp
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x1024 S0C1 Bright2 PI RMF
Calibration data from ./
Please stand by...
...Done.

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 IC443    BRIGHT2  HIGH     14/04/93 06:25:04 0.96E+04    60905 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
          60905      8221          52684         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         60905      8221          52684         0         0         0
   in    9591.02 seconds
 Spectrum         has     8221 counts for 0.8572     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 9591.0          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.34180E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      25  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec2.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events events.tmp
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-SIS0-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad10011010s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_OFFCHIP.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad10011010s010112.discrim
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP0.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP1.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS0-BRIGHT2 > save spectrum spec2.tmp group=yes
Wrote spectrum to spec2.tmp
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x1024 S0C2 Bright2 PI RMF
Calibration data from ./
Please stand by...
...Done.

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 IC443    BRIGHT2  HIGH     14/04/93 06:25:04 0.96E+04    60905 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
          60905      9088          51817         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         60905      9088          51817         0         0         0
   in    9591.02 seconds
 Spectrum         has     9088 counts for 0.9476     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 9591.0          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.52539E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      25  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec3.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events events.tmp
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-SIS0-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad10011010s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_OFFCHIP.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad10011010s010112.discrim
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP0.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP1.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS0-BRIGHT2 > save spectrum spec3.tmp group=yes
Wrote spectrum to spec3.tmp
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x1024 S0C3 Bright2 PI RMF
Calibration data from ./
Please stand by...
...Done.

rmf0.tmp 0.421558164354322
rmf1.tmp 0.294245135867334
rmf2.tmp 0.13498070765947
rmf3.tmp 0.149215992118874

ADDRMF vers 1.10  10 April, 1997.
Summing ...
 4.216E-01 * rmf0.tmp
 2.942E-01 * rmf1.tmp
 1.350E-01 * rmf2.tmp
 1.492E-01 * rmf3.tmp
 RMF #    1 : rmf0.tmp                   0.42
              ASCA       SIS0       NONE       NONE       PI
 RMF #    2 : rmf1.tmp                   0.29
              ASCA       SIS0       NONE       NONE       PI
 RMF #    3 : rmf2.tmp                   0.13
              ASCA       SIS0       NONE       NONE       PI
 RMF #    4 : rmf3.tmp                   0.15
              ASCA       SIS0       NONE       NONE       PI

ASCAARF vers 2.72  14 Mar 1997.
 
 Input WMAP array has size   88 by  103 bins
               expanded to   88 by  103 bins
 First WMAP bin is at detector pixel  224  240
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   316.71     arcmin^2
 Optical axis is detector pixel 662.72 559.02
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 6.05790E+04
 Weighted mean angle from optical axis  =  7.299 arcmin
 

1 ad10011010s100102h.evt 166126
1 ad10011010s100202m.evt 166126
1 ad10011010s100402h.evt 166126

ad10011010s100102h.evt
ad10011010s100202m.evt
ad10011010s100402h.evt

1 ad10011010s100112h.evt 99242
1 ad10011010s100412h.evt 99242

ad10011010s100112h.evt
ad10011010s100412h.evt

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT2  HIGH     14/04/93 06:25:04 0.12E+05    99213 1111
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT2  HIGH     14/04/93 06:25:04 0.12E+05    99213 1111
      2 IC443    BRIGHT2  HIGH     14/04/93 08:06:08 0.20E+01       29 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s100112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          99213     79391          19822         0         0         0
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s100412h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             29        26              3         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         99242     79417          19825         0         0         0
   in   11605.12 seconds
 Spectrum         has    79417 counts for  6.843     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 11605.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.27248         Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      25  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10011010s110112_1.pi
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s100112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          99213     79391          19822         0         0         0
 Writing events file
  79391 events written to the output file
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s100412h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             29        26              3         0         0         0
 Writing events file
  79417 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         99242     79417          19825         0         0         0
   in   11605.12 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events ad10011010s100112h.evt
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-SIS1-BRIGHT2 > read events ad10011010s100412h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-SIS1-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad10011010s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_OFFCHIP.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad10011010s110112.discrim
!xsel:ASCA-SIS1-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS1-BRIGHT2 > save spectrum ad10011010s110112_1.pi group=yes
Wrote spectrum to ad10011010s110112_1.pi
!xsel:ASCA-SIS1-BRIGHT2 > extract events
!xsel:ASCA-SIS1-BRIGHT2 > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data15/seq_proc/10011010.006/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 11605.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.27248         Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      25  of undefined grouping (Channel quality=bad)
 ...        26 -      27  are grouped by a factor        2
 ...        28 -      30  are grouped by a factor        3
 ...        31 -      32  are grouped by a factor        2
 ...        33 -     186  are single channels
 ...       187 -     194  are grouped by a factor        2
 ...       195 -     196  are single channels
 ...       197 -     210  are grouped by a factor        2
 ...       211 -     212  are single channels
 ...       213 -     216  are grouped by a factor        2
 ...       217 -     219  are grouped by a factor        3
 ...       220 -     225  are grouped by a factor        2
 ...       226 -     228  are grouped by a factor        3
 ...       229 -     234  are grouped by a factor        2
 ...       235 -     264  are grouped by a factor        3
 ...       265 -     272  are grouped by a factor        4
 ...       273 -     278  are grouped by a factor        6
 ...       279 -     283  are grouped by a factor        5
 ...       284 -     289  are grouped by a factor        6
 ...       290 -     297  are grouped by a factor        8
 ...       298 -     304  are grouped by a factor        7
 ...       305 -     314  are grouped by a factor       10
 ...       315 -     327  are grouped by a factor       13
 ...       328 -     349  are grouped by a factor       22
 ...       350 -     381  are grouped by a factor       32
 ...       382 -     422  are grouped by a factor       41
 ...       423 -     451  are grouped by a factor       29
 ...       452 -     492  are grouped by a factor       41
 ...       493 -     516  are grouped by a factor       24
 ...       517 -     638  are grouped by a factor      122
 ...       639 -     764  are grouped by a factor      126
 ...       765 -     852  are grouped by a factor       88
 ...       853 -     868  are grouped by a factor       16
 ...       869 -     878  are grouped by a factor       10
 ...       879 -     927  are grouped by a factor       49
 ...       928 -     947  are grouped by a factor       20
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10011010s110112_1.pi
 ** grppha 2.6.0 completed successfully

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT2  HIGH     14/04/93 06:25:04 0.12E+05    79417 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
          79417      6907          72510         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         79417      6907          72510         0         0         0
   in   11605.12 seconds
 Spectrum         has     6907 counts for 0.5952     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 11605.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 3.83203E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      25  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec0.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events events.tmp
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-SIS1-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad10011010s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_OFFCHIP.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad10011010s110112.discrim
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP3.1
!xsel:ASCA-SIS1-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS1-BRIGHT2 > save spectrum spec0.tmp group=yes
Wrote spectrum to spec0.tmp
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x1024 S1C0 Bright2 PI RMF
Calibration data from ./
Please stand by...
...Done.

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT2  HIGH     14/04/93 06:25:04 0.12E+05    79417 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
          79417     13642          65775         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         79417     13642          65775         0         0         0
   in   11605.12 seconds
 Spectrum         has    13642 counts for  1.176     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 11605.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.89160E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      25  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec1.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events events.tmp
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-SIS1-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad10011010s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_OFFCHIP.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad10011010s110112.discrim
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP3.1
!xsel:ASCA-SIS1-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS1-BRIGHT2 > save spectrum spec1.tmp group=yes
Wrote spectrum to spec1.tmp
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x1024 S1C1 Bright2 PI RMF
Calibration data from ./
Please stand by...
...Done.

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT2  HIGH     14/04/93 06:25:04 0.12E+05    79417 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
          79417     43007          36410         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         79417     43007          36410         0         0         0
   in   11605.12 seconds
 Spectrum         has    43007 counts for  3.706     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 11605.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.10087         Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      25  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec2.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events events.tmp
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-SIS1-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad10011010s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_OFFCHIP.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad10011010s110112.discrim
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP3.1
!xsel:ASCA-SIS1-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS1-BRIGHT2 > save spectrum spec2.tmp group=yes
Wrote spectrum to spec2.tmp
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x1024 S1C2 Bright2 PI RMF
Calibration data from ./
Please stand by...
...Done.

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT2  HIGH     14/04/93 06:25:04 0.12E+05    79417 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
          79417     15861          63556         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         79417     15861          63556         0         0         0
   in   11605.12 seconds
 Spectrum         has    15861 counts for  1.367     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 11605.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 8.43750E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      25  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec3.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events events.tmp
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-SIS1-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad10011010s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_OFFCHIP.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad10011010s110112.discrim
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS1-BRIGHT2 > save spectrum spec3.tmp group=yes
Wrote spectrum to spec3.tmp
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x1024 S1C3 Bright2 PI RMF
Calibration data from ./
Please stand by...
...Done.

rmf0.tmp 0.0869713033733332
rmf1.tmp 0.171776823602
rmf2.tmp 0.541533928503973
rmf3.tmp 0.199717944520695

ADDRMF vers 1.10  10 April, 1997.
Summing ...
 8.697E-02 * rmf0.tmp
 1.718E-01 * rmf1.tmp
 5.415E-01 * rmf2.tmp
 1.997E-01 * rmf3.tmp
 RMF #    1 : rmf0.tmp                   0.09
              ASCA       SIS1       NONE       NONE       PI
 RMF #    2 : rmf1.tmp                   0.17
              ASCA       SIS1       NONE       NONE       PI
 RMF #    3 : rmf2.tmp                   0.54
              ASCA       SIS1       NONE       NONE       PI
 RMF #    4 : rmf3.tmp                   0.20
              ASCA       SIS1       NONE       NONE       PI

ASCAARF vers 2.72  14 Mar 1997.
 
 Input WMAP array has size   87 by  102 bins
               expanded to   87 by  102 bins
 First WMAP bin is at detector pixel  224  264
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   313.98     arcmin^2
 Optical axis is detector pixel 618.28 773.83
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 7.90900E+04
 Weighted mean angle from optical axis  =  6.221 arcmin
 

1 ad10011010g200170h.evt 97922
1 ad10011010g200270m.evt 97922
1 ad10011010g200370m.evt 97922

ad10011010g200170h.evt
ad10011010g200270m.evt
ad10011010g200370m.evt

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.12E+05    60835     1024
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.12E+05    60835     1024
      2 IC443    PH       MEDIUM   14/04/93 05:16:28 0.71E+04    36925     1024
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.12E+05    60835     1024
      2 IC443    PH       MEDIUM   14/04/93 05:16:28 0.71E+04    36925     1024
      3 IC443    PH       MEDIUM   14/04/93 06:40:12 0.32E+02      162     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          60835     33259          27576         0         0         0
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          36925     19904          17021         0         0         0
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            162        77             85         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         97922     53240          44682         0         0         0
   in   18911.05 seconds
 Spectrum         has    53240 counts for  2.815     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 18911.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 7.55157E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1992a           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10011010g210170_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events ad10011010g200170h.evt
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-GIS2-PH > read events ad10011010g200270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-GIS2-PH > read events ad10011010g200370m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-GIS2-PH > set phaname PI
!xsel:ASCA-GIS2-PH > filter region ad10011010g225670_1.reg
!xsel:ASCA-GIS2-PH > filter region GIS2_REGION256_OFF.4
!xsel:ASCA-GIS2-PH > extract spectrum
!xsel:ASCA-GIS2-PH > save spectrum ad10011010g210170_1.pi group=yes
Wrote spectrum to ad10011010g210170_1.pi
!xsel:ASCA-GIS2-PH > exit save_session=no

... read all the files from deadlist.tmp

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 18911.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 7.55157E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - TRUE            Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      19  are grouped by a factor       20
 ...        20 -     237  are single channels
 ...       238 -     239  are grouped by a factor        2
 ...       240 -     241  are single channels
 ...       242 -     249  are grouped by a factor        2
 ...       250 -     250  are single channels
 ...       251 -     280  are grouped by a factor        2
 ...       281 -     283  are grouped by a factor        3
 ...       284 -     287  are grouped by a factor        2
 ...       288 -     290  are grouped by a factor        3
 ...       291 -     294  are grouped by a factor        2
 ...       295 -     306  are grouped by a factor        3
 ...       307 -     308  are grouped by a factor        2
 ...       309 -     314  are grouped by a factor        3
 ...       315 -     334  are grouped by a factor        4
 ...       335 -     339  are grouped by a factor        5
 ...       340 -     343  are grouped by a factor        4
 ...       344 -     349  are grouped by a factor        6
 ...       350 -     365  are grouped by a factor        8
 ...       366 -     374  are grouped by a factor        9
 ...       375 -     396  are grouped by a factor       11
 ...       397 -     406  are grouped by a factor       10
 ...       407 -     422  are grouped by a factor       16
 ...       423 -     442  are grouped by a factor       20
 ...       443 -     470  are grouped by a factor       28
 ...       471 -     508  are grouped by a factor       38
 ...       509 -     556  are grouped by a factor       48
 ...       557 -     599  are grouped by a factor       43
 ...       600 -     684  are grouped by a factor       85
 ...       685 -     773  are grouped by a factor       89
 ...       774 -    1023  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10011010g210170_1.pi
 ** grppha 2.6.0 completed successfully

ASCAARF vers 2.72  14 Mar 1997.
 
 Input WMAP array has size   79 by   79 bins
               expanded to  128 by  128 bins
 First WMAP bin is at detector pixel   47   82
   1 detector pixels per WMAP bin
 WMAP bin size is   0.25000 mm
                    0.24555 arcmin
 Selected region size is   298.47     arcmin^2
 Optical axis is detector pixel 133.00 130.96
 
  201 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 5.32400E+04
 Weighted mean angle from optical axis  =  7.393 arcmin
 

1 ad10011010g300170h.evt 97592
1 ad10011010g300270m.evt 97592
1 ad10011010g300370m.evt 97592

ad10011010g300170h.evt
ad10011010g300270m.evt
ad10011010g300370m.evt

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.12E+05    60918     1024
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.12E+05    60918     1024
      2 IC443    PH       MEDIUM   14/04/93 05:16:28 0.71E+04    36522     1024
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.12E+05    60918     1024
      2 IC443    PH       MEDIUM   14/04/93 05:16:28 0.71E+04    36522     1024
      3 IC443    PH       MEDIUM   14/04/93 06:40:12 0.32E+02      152     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          60918     40078          20840         0         0         0
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          36522     23872          12650         0         0         0
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            152       104             48         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         97592     64054          33538         0         0         0
   in   18903.05 seconds
 Spectrum         has    64054 counts for  3.389     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 18903.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 7.55157E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1992a           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10011010g310170_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events ad10011010g300170h.evt
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-GIS3-PH > read events ad10011010g300270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-GIS3-PH > read events ad10011010g300370m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-GIS3-PH > set phaname PI
!xsel:ASCA-GIS3-PH > filter region ad10011010g325670_1.reg
!xsel:ASCA-GIS3-PH > filter region GIS3_REGION256_OFF.4
!xsel:ASCA-GIS3-PH > extract spectrum
!xsel:ASCA-GIS3-PH > save spectrum ad10011010g310170_1.pi group=yes
Wrote spectrum to ad10011010g310170_1.pi
!xsel:ASCA-GIS3-PH > exit save_session=no

... read all the files from deadlist.tmp

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 18903.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 7.55157E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - TRUE            Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      19  are grouped by a factor       20
 ...        20 -     237  are single channels
 ...       238 -     245  are grouped by a factor        2
 ...       246 -     247  are single channels
 ...       248 -     249  are grouped by a factor        2
 ...       250 -     251  are single channels
 ...       252 -     261  are grouped by a factor        2
 ...       262 -     263  are single channels
 ...       264 -     289  are grouped by a factor        2
 ...       290 -     295  are grouped by a factor        3
 ...       296 -     297  are grouped by a factor        2
 ...       298 -     300  are grouped by a factor        3
 ...       301 -     302  are grouped by a factor        2
 ...       303 -     326  are grouped by a factor        3
 ...       327 -     342  are grouped by a factor        4
 ...       343 -     347  are grouped by a factor        5
 ...       348 -     353  are grouped by a factor        6
 ...       354 -     361  are grouped by a factor        8
 ...       362 -     368  are grouped by a factor        7
 ...       369 -     384  are grouped by a factor        8
 ...       385 -     395  are grouped by a factor       11
 ...       396 -     409  are grouped by a factor       14
 ...       410 -     421  are grouped by a factor       12
 ...       422 -     441  are grouped by a factor       20
 ...       442 -     459  are grouped by a factor       18
 ...       460 -     485  are grouped by a factor       26
 ...       486 -     517  are grouped by a factor       32
 ...       518 -     552  are grouped by a factor       35
 ...       553 -     593  are grouped by a factor       41
 ...       594 -     679  are grouped by a factor       86
 ...       680 -     774  are grouped by a factor       95
 ...       775 -    1023  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10011010g310170_1.pi
 ** grppha 2.6.0 completed successfully

ASCAARF vers 2.72  14 Mar 1997.
 
 Input WMAP array has size   79 by   79 bins
               expanded to  128 by  128 bins
 First WMAP bin is at detector pixel   54   83
   1 detector pixels per WMAP bin
 WMAP bin size is   0.25000 mm
                    0.24555 arcmin
 Selected region size is   298.47     arcmin^2
 Optical axis is detector pixel 119.36 134.44
 
  201 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 6.40540E+04
 Weighted mean angle from optical axis  =  5.546 arcmin
 

 
               XSPEC 9.01 22:43:41 16-May-98
 
 Plot device not set, use "cpd" to set it
 
 Type "help" or "?" for further information
!XSPEC> data ad10011010g210170_1.pi
 Net count rate (cts/s) for file   1   2.815    +/-  1.2226E-02
   1 data set is in use
!XSPEC> setplot energy
!XSPEC> ignore bad
!XSPEC> iplot
!PLT> log y on
!PLT> rescale y
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
 XSPEC: quit

 
               XSPEC 9.01 22:43:58 16-May-98
 
 Plot device not set, use "cpd" to set it
 
 Type "help" or "?" for further information
!XSPEC> data ad10011010g310170_1.pi
 Net count rate (cts/s) for file   1   3.389    +/-  1.3412E-02
   1 data set is in use
!XSPEC> setplot energy
!XSPEC> ignore bad
!XSPEC> iplot
!PLT> log y on
!PLT> rescale y
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
 XSPEC: quit

 
               XSPEC 9.01 22:44:13 16-May-98
 
 Plot device not set, use "cpd" to set it
 
 Type "help" or "?" for further information
!XSPEC> data ad10011010s010112_1.pi
 Net count rate (cts/s) for file   1   6.350    +/-  2.5736E-02
   1 data set is in use
!XSPEC> setplot energy
!XSPEC> ignore bad
!XSPEC> iplot
!PLT> log y on
!PLT> rescale y
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
 XSPEC: quit

 
               XSPEC 9.01 22:44:29 16-May-98
 
 Plot device not set, use "cpd" to set it
 
 Type "help" or "?" for further information
!XSPEC> data ad10011010s110112_1.pi
 Net count rate (cts/s) for file   1   6.843    +/-  2.4286E-02
   1 data set is in use
!XSPEC> setplot energy
!XSPEC> ignore bad
!XSPEC> iplot
!PLT> log y on
!PLT> rescale y
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
 XSPEC: quit

Extracting light curves ( 22:44:40 )

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 IC443    BRIGHT   HIGH     14/04/93 06:25:04 0.96E+04    74910 1111
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 IC443    BRIGHT   HIGH     14/04/93 06:25:04 0.96E+04    74910 1111
      2 IC443    BRIGHT   MEDIUM   14/04/93 05:09:00 0.77E+04    59639 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          74910     61130          13780         0         0         0
 Writing events file
  61130 events written to the output file
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          59639     49340          10299         0         0         0
 Writing events file
 110470 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        134549    110470          24079         0         0         0
   in   17321.68 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events ad10011010s000102h.evt
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-SIS0-BRIGHT > read events ad10011010s000202m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-SIS0-BRIGHT > filter region ad10011010s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data15/seq_proc/10011010.006/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 IC443    BRIGHT   HIGH     14/04/93 05:09:00 0.17E+05   110470 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
         110470    110470              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        110470    110470              0         0         0         0
   in   17321.68 seconds
 Fits light curve has   110470 counts for  6.378     counts/sec
 Thresholding removed significant counts
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events events.tmp
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-SIS0-BRIGHT > set binsize 1.6000000000E+01
!xsel:ASCA-SIS0-BRIGHT > extract curve exposure=0.5
!xsel:ASCA-SIS0-BRIGHT > save curve ad10011010s000002_1.lc
Wrote FITS light curve to file ad10011010s000002_1.lc
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

                                                     Type "help" for information


 [1]xronos>   Current User Interface is ;           command driven                          
 [2]xronos>       Enter up to  50 input filenames and options for series 1 (or rtn)    
      Ser. A filename   1 +options[.rbf]=> ad10011010s000002_1.lc                                                                                                              
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ IC443               Start Time (d) ....  9091 08:03:12.725
 FITS Extension ....  1 - `RATE      `   Stop Time (d) .....  9092 02:39:26.408
 No. of Rows .......         1085        Bin Time (s) ......    16.00
 Right Ascension ... 9.4360E+01          Internal time sys.. Converted to TJD
 Declination ....... 2.2682E+01          Experiment ........ ASCA     SIS0
 
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:   1 - Time;   2 - Y-axis;   3 - Y-error;
 
 File contains binned data.
 
      Ser. A filename   2 +options[.rbf]=>                                                                                                                                     
      Enter up to  50 input filenames and options for series 2 (or rtn)    
      Ser. B filename   1 +options[.rbf]=>                                                                                                                                     
      Enter up to  50 input filenames and options for series 3 (or rtn)    
      Ser. C filename   1 +options[.rbf]=>                                                                                                                                     
 [3]xronos> 
 Maximum of      1 Intvs. with       512 Newbins of       130.961     (s) 

 
 Intv    1   Start 9091  8: 4:18
     Ser.1     Avg  6.364        Chisq  364.4       Var 0.2789     Newbs.   154
               Min  3.241          Max  7.812    expVar 0.7377E-01  Bins   1085

             Results from Statistical Analysis

             Newbin Integration Time (s)..  130.96    
             Interval Duration (s)........  66921.    
             No. of Newbins ..............     154
             Average (c/s) ...............  6.3638      +/-    0.22E-01
             Standard Deviation (c/s)..... 0.52807    
             Minimum (c/s)................  3.2411    
             Maximum (c/s)................  7.8123    
             Variance ((c/s)**2).......... 0.27886     +/-    0.32E-01
             Expected Variance ((c/s)**2). 0.73769E-01 +/-    0.84E-02
             Third Moment ((c/s)**3)......-0.33400    
             Average Deviation (c/s)...... 0.31221    
             Skewness..................... -2.2681        +/-    0.20    
             Kurtosis.....................  11.767        +/-    0.39    
             RMS fractional variation..... 0.71163E-01    +/-    0.55E-02
             Chi-Square...................  364.37        dof     153
             Chi-Square Prob of constancy. 0.27712E-18 (0 means < 1.e-38)
             Kolm.-Smir. Prob of constancy 0.69770E-01 (0 means < 1.e-38)

 [4]xronos>  [5]xronos> 
 Maximum of      1 Intvs. with       512 Newbins of       130.961     (s) 

 
 Intv    1   Start 9091  8: 4:18
     Ser.1     Avg  6.364        Chisq  364.4       Var 0.2789     Newbs.   154
               Min  3.241          Max  7.812    expVar 0.7377E-01  Bins   1085
             Light curve ready !
 Frme    1  Written to output file : xronos.qlc1                                                                                                                         
 PLT>  PLT>  PLT>  [6]xronos> 

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT   HIGH     14/04/93 06:25:04 0.12E+05    98329 1111
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT   HIGH     14/04/93 06:25:04 0.12E+05    98329 1111
      2 IC443    BRIGHT   MEDIUM   14/04/93 05:09:00 0.79E+04    67768 1111
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT   HIGH     14/04/93 06:25:04 0.12E+05    98329 1111
      2 IC443    BRIGHT   MEDIUM   14/04/93 05:09:00 0.79E+04    67768 1111
      3 IC443    BRIGHT   HIGH     14/04/93 08:06:08 0.20E+01       29 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          98329     79610          18719         0         0         0
 Writing events file
  79610 events written to the output file
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          67768     54488          13280         0         0         0
 Writing events file
 134098 events written to the output file
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s100402h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             29        27              2         0         0         0
 Writing events file
 134125 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        166126    134125          32001         0         0         0
   in   19519.78 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events ad10011010s100102h.evt
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-SIS1-BRIGHT > read events ad10011010s100202m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-SIS1-BRIGHT > read events ad10011010s100402h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-SIS1-BRIGHT > filter region ad10011010s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data15/seq_proc/10011010.006/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT   HIGH     14/04/93 05:09:00 0.20E+05   134125 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
         134125    134125              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        134125    134125              0         0         0         0
   in   19519.78 seconds
 Fits light curve has   134125 counts for  6.871     counts/sec
 Thresholding removed significant counts
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events events.tmp
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-SIS1-BRIGHT > set binsize 1.6000000000E+01
!xsel:ASCA-SIS1-BRIGHT > extract curve exposure=0.5
!xsel:ASCA-SIS1-BRIGHT > save curve ad10011010s100002_1.lc
Wrote FITS light curve to file ad10011010s100002_1.lc
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

                                                     Type "help" for information


 [1]xronos>   Current User Interface is ;           command driven                          
 [2]xronos>       Enter up to  50 input filenames and options for series 1 (or rtn)    
      Ser. A filename   1 +options[.rbf]=> ad10011010s100002_1.lc                                                                                                              
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ IC443               Start Time (d) ....  9091 08:03:12.725
 FITS Extension ....  1 - `RATE      `   Stop Time (d) .....  9092 02:39:28.725
 No. of Rows .......         1223        Bin Time (s) ......    16.00
 Right Ascension ... 9.4360E+01          Internal time sys.. Converted to TJD
 Declination ....... 2.2682E+01          Experiment ........ ASCA     SIS1
 
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:   1 - Time;   2 - Y-axis;   3 - Y-error;
 
 File contains binned data.
 
      Ser. A filename   2 +options[.rbf]=>                                                                                                                                     
      Enter up to  50 input filenames and options for series 2 (or rtn)    
      Ser. B filename   1 +options[.rbf]=>                                                                                                                                     
      Enter up to  50 input filenames and options for series 3 (or rtn)    
      Ser. C filename   1 +options[.rbf]=>                                                                                                                                     
 [3]xronos> 
 Maximum of      1 Intvs. with       512 Newbins of       130.966     (s) 

 
 Intv    1   Start 9091  8: 4:18
     Ser.1     Avg  6.868        Chisq  163.9       Var 0.1124     Newbs.   169
               Min  5.354          Max  8.578    expVar 0.7048E-01  Bins   1223

             Results from Statistical Analysis

             Newbin Integration Time (s)..  130.97    
             Interval Duration (s)........  66924.    
             No. of Newbins ..............     169
             Average (c/s) ...............  6.8681      +/-    0.20E-01
             Standard Deviation (c/s)..... 0.33524    
             Minimum (c/s)................  5.3542    
             Maximum (c/s)................  8.5781    
             Variance ((c/s)**2).......... 0.11239     +/-    0.12E-01
             Expected Variance ((c/s)**2). 0.70476E-01 +/-    0.77E-02
             Third Moment ((c/s)**3)......-0.13903E-01
             Average Deviation (c/s)...... 0.22881    
             Skewness.....................-0.36902        +/-    0.19    
             Kurtosis.....................  7.3239        +/-    0.38    
             RMS fractional variation..... 0.29807E-01    +/-    0.44E-02
             Chi-Square...................  163.93        dof     168
             Chi-Square Prob of constancy. 0.57423     (0 means < 1.e-38)
             Kolm.-Smir. Prob of constancy 0.26392     (0 means < 1.e-38)

 [4]xronos>  [5]xronos> 
 Maximum of      1 Intvs. with       512 Newbins of       130.966     (s) 

 
 Intv    1   Start 9091  8: 4:18
     Ser.1     Avg  6.868        Chisq  163.9       Var 0.1124     Newbs.   169
               Min  5.354          Max  8.578    expVar 0.7048E-01  Bins   1223
             Light curve ready !
 Frme    1  Written to output file : xronos.qlc1                                                                                                                         
 PLT>  PLT>  PLT>  [6]xronos> 

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.12E+05    60835     1024
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.12E+05    60835     1024
      2 IC443    PH       MEDIUM   14/04/93 05:16:28 0.71E+04    36925     1024
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.12E+05    60835     1024
      2 IC443    PH       MEDIUM   14/04/93 05:16:28 0.71E+04    36925     1024
      3 IC443    PH       MEDIUM   14/04/93 06:40:12 0.32E+02      162     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          60835     33259          27576         0         0         0
 Writing events file
  33259 events written to the output file
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          36925     19904          17021         0         0         0
 Writing events file
  53163 events written to the output file
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            162        77             85         0         0         0
 Writing events file
  53240 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         97922     53240          44682         0         0         0
   in   18911.05 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events ad10011010g200170h.evt
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-GIS2-PH > read events ad10011010g200270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-GIS2-PH > read events ad10011010g200370m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-GIS2-PH > filter region ad10011010g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data15/seq_proc/10011010.006/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.19E+05    53240     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
          53240     53240              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         53240     53240              0         0         0         0
   in   18911.05 seconds
 Fits light curve has    53240 counts for  2.815     counts/sec
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events events.tmp
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-GIS2-PH > set binsize 17.7601888246053
!xsel:ASCA-GIS2-PH > extract curve exposure=0.5
!xsel:ASCA-GIS2-PH > save curve ad10011010g200070_1.lc
Wrote FITS light curve to file ad10011010g200070_1.lc
!xsel:ASCA-GIS2-PH > exit save_session=no

                                                     Type "help" for information


 [1]xronos>   Current User Interface is ;           command driven                          
 [2]xronos>       Enter up to  50 input filenames and options for series 1 (or rtn)    
      Ser. A filename   1 +options[.rbf]=> ad10011010g200070_1.lc                                                                                                              
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ IC443               Start Time (d) ....  9091 08:03:12.725
 FITS Extension ....  1 - `RATE      `   Stop Time (d) .....  9092 02:39:28.725
 No. of Rows .......         1066        Bin Time (s) ......    17.76
 Right Ascension ... 9.4360E+01          Internal time sys.. Converted to TJD
 Declination ....... 2.2682E+01          Experiment ........ ASCA     GIS2
 
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:   1 - Time;   2 - Y-axis;   3 - Y-error;
 
 File contains binned data.
 
      Ser. A filename   2 +options[.rbf]=>                                                                                                                                     
      Enter up to  50 input filenames and options for series 2 (or rtn)    
      Ser. B filename   1 +options[.rbf]=>                                                                                                                                     
      Enter up to  50 input filenames and options for series 3 (or rtn)    
      Ser. C filename   1 +options[.rbf]=>                                                                                                                                     
 [3]xronos> 
 Maximum of      1 Intvs. with       512 Newbins of       130.966     (s) 

 
 Intv    1   Start 9091  8: 4:18
     Ser.1     Avg  2.829        Chisq  111.1       Var 0.3356E-01 Newbs.   170
               Min  2.494          Max  3.491    expVar 0.3786E-01  Bins   1066

             Results from Statistical Analysis

             Newbin Integration Time (s)..  130.97    
             Interval Duration (s)........  66924.    
             No. of Newbins ..............     170
             Average (c/s) ...............  2.8295      +/-    0.15E-01
             Standard Deviation (c/s)..... 0.18318    
             Minimum (c/s)................  2.4935    
             Maximum (c/s)................  3.4910    
             Variance ((c/s)**2).......... 0.33555E-01 +/-    0.37E-02
             Expected Variance ((c/s)**2). 0.37865E-01 +/-    0.41E-02
             Third Moment ((c/s)**3)...... 0.57403E-02
             Average Deviation (c/s)...... 0.13922    
             Skewness..................... 0.93388        +/-    0.19    
             Kurtosis.....................  1.5487        +/-    0.38    
             RMS fractional variation....< 0.47244E-01 (3 sigma)
             Chi-Square...................  111.06        dof     169
             Chi-Square Prob of constancy. 0.99982     (0 means < 1.e-38)
             Kolm.-Smir. Prob of constancy 0.28412E-01 (0 means < 1.e-38)
 [4]xronos>  [5]xronos> 
 Maximum of      1 Intvs. with       512 Newbins of       130.966     (s) 

 
 Intv    1   Start 9091  8: 4:18
     Ser.1     Avg  2.829        Chisq  111.1       Var 0.3356E-01 Newbs.   170
               Min  2.494          Max  3.491    expVar 0.3786E-01  Bins   1066
             Light curve ready !
 Frme    1  Written to output file : xronos.qlc1                                                                                                                         
 PLT>  PLT>  PLT>  [6]xronos> 

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.12E+05    60918     1024
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.12E+05    60918     1024
      2 IC443    PH       MEDIUM   14/04/93 05:16:28 0.71E+04    36522     1024
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.12E+05    60918     1024
      2 IC443    PH       MEDIUM   14/04/93 05:16:28 0.71E+04    36522     1024
      3 IC443    PH       MEDIUM   14/04/93 06:40:12 0.32E+02      152     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          60918     40078          20840         0         0         0
 Writing events file
  40078 events written to the output file
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          36522     23872          12650         0         0         0
 Writing events file
  63950 events written to the output file
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            152       104             48         0         0         0
 Writing events file
  64054 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         97592     64054          33538         0         0         0
   in   18903.05 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events ad10011010g300170h.evt
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-GIS3-PH > read events ad10011010g300270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-GIS3-PH > read events ad10011010g300370m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-GIS3-PH > filter region ad10011010g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data15/seq_proc/10011010.006/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.19E+05    64054     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
          64054     64054              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         64054     64054              0         0         0         0
   in   18903.05 seconds
 Fits light curve has    64054 counts for  3.389     counts/sec
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events events.tmp
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-GIS3-PH > set binsize 14.7555571098029
!xsel:ASCA-GIS3-PH > extract curve exposure=0.5
!xsel:ASCA-GIS3-PH > save curve ad10011010g300070_1.lc
Wrote FITS light curve to file ad10011010g300070_1.lc
!xsel:ASCA-GIS3-PH > exit save_session=no

                                                     Type "help" for information


 [1]xronos>   Current User Interface is ;           command driven                          
 [2]xronos>       Enter up to  50 input filenames and options for series 1 (or rtn)    
      Ser. A filename   1 +options[.rbf]=> ad10011010g300070_1.lc                                                                                                              
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ IC443               Start Time (d) ....  9091 08:03:12.725
 FITS Extension ....  1 - `RATE      `   Stop Time (d) .....  9092 02:39:28.725
 No. of Rows .......         1284        Bin Time (s) ......    14.76
 Right Ascension ... 9.4360E+01          Internal time sys.. Converted to TJD
 Declination ....... 2.2682E+01          Experiment ........ ASCA     GIS3
 
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:   1 - Time;   2 - Y-axis;   3 - Y-error;
 
 File contains binned data.
 
      Ser. A filename   2 +options[.rbf]=>                                                                                                                                     
      Enter up to  50 input filenames and options for series 2 (or rtn)    
      Ser. B filename   1 +options[.rbf]=>                                                                                                                                     
      Enter up to  50 input filenames and options for series 3 (or rtn)    
      Ser. C filename   1 +options[.rbf]=>                                                                                                                                     
 [3]xronos> 
 Maximum of      1 Intvs. with       512 Newbins of       130.966     (s) 

 
 Intv    1   Start 9091  8: 4:18
     Ser.1     Avg  3.367        Chisq  107.9       Var 0.4463E-01 Newbs.   171
               Min  2.506          Max  4.063    expVar 0.4525E-01  Bins   1284

             Results from Statistical Analysis

             Newbin Integration Time (s)..  130.97    
             Interval Duration (s)........  66924.    
             No. of Newbins ..............     171
             Average (c/s) ...............  3.3675      +/-    0.16E-01
             Standard Deviation (c/s)..... 0.21126    
             Minimum (c/s)................  2.5063    
             Maximum (c/s)................  4.0628    
             Variance ((c/s)**2).......... 0.44631E-01 +/-    0.48E-02
             Expected Variance ((c/s)**2). 0.45255E-01 +/-    0.49E-02
             Third Moment ((c/s)**3)......-0.24315E-02
             Average Deviation (c/s)...... 0.15407    
             Skewness.....................-0.25788        +/-    0.19    
             Kurtosis.....................  1.8518        +/-    0.37    
             RMS fractional variation....< 0.38450E-01 (3 sigma)
             Chi-Square...................  107.89        dof     170
             Chi-Square Prob of constancy. 0.99994     (0 means < 1.e-38)
             Kolm.-Smir. Prob of constancy 0.52148E-01 (0 means < 1.e-38)
 [4]xronos>  [5]xronos> 
 Maximum of      1 Intvs. with       512 Newbins of       130.966     (s) 

 
 Intv    1   Start 9091  8: 4:18
     Ser.1     Avg  3.367        Chisq  107.9       Var 0.4463E-01 Newbs.   171
               Min  2.506          Max  4.063    expVar 0.4525E-01  Bins   1284
             Light curve ready !
 Frme    1  Written to output file : xronos.qlc1                                                                                                                         
 PLT>  PLT>  PLT>  [6]xronos> 

ad10011010g200170h.evt[2]
ad10011010g200270m.evt[2]
ad10011010g200370m.evt[2]

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  57199 output records from   57231  good input G2_L1    records.

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  18858 output records from   64381  good input G2_L1    records.

ad10011010g300170h.evt[2]
ad10011010g300270m.evt[2]
ad10011010g300370m.evt[2]

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  57168 output records from   57202  good input G3_L1    records.

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  18858 output records from   64356  good input G3_L1    records.

Extracting source event files ( 22:58:55 )

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.12E+05    60835     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          60835     33259          27576         0         0         0
 Writing events file
  33259 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         60835     33259          27576         0         0         0
   in   11755.48 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events ad10011010g200170h.evt
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-GIS2-PH > filter region ad10011010g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad10011010g200170h_1.ulc use_events=yes
Wrote events list to file ad10011010g200170h_1.ulc
Changing Data directory from:
    /data/data15/seq_proc/10011010.006/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       MEDIUM   14/04/93 05:16:28 0.71E+04    36925     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          36925     19904          17021         0         0         0
 Writing events file
  19904 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         36925     19904          17021         0         0         0
   in    7123.57 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events ad10011010g200270m.evt
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-GIS2-PH > filter region ad10011010g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad10011010g200270m_1.ulc use_events=yes
Wrote events list to file ad10011010g200270m_1.ulc
Changing Data directory from:
    /data/data15/seq_proc/10011010.006/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       MEDIUM   14/04/93 06:40:12 0.32E+02      162     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            162        77             85         0         0         0
 Writing events file
     77 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           162        77             85         0         0         0
   in      32.00 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events ad10011010g200370m.evt
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-GIS2-PH > filter region ad10011010g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad10011010g200370m_1.ulc use_events=yes
Wrote events list to file ad10011010g200370m_1.ulc
Changing Data directory from:
    /data/data15/seq_proc/10011010.006/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.12E+05    60918     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          60918     40078          20840         0         0         0
 Writing events file
  40078 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         60918     40078          20840         0         0         0
   in   11747.48 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events ad10011010g300170h.evt
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-GIS3-PH > filter region ad10011010g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad10011010g300170h_1.ulc use_events=yes
Wrote events list to file ad10011010g300170h_1.ulc
Changing Data directory from:
    /data/data15/seq_proc/10011010.006/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       MEDIUM   14/04/93 05:16:28 0.71E+04    36522     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          36522     23872          12650         0         0         0
 Writing events file
  23872 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         36522     23872          12650         0         0         0
   in    7123.57 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events ad10011010g300270m.evt
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-GIS3-PH > filter region ad10011010g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad10011010g300270m_1.ulc use_events=yes
Wrote events list to file ad10011010g300270m_1.ulc
Changing Data directory from:
    /data/data15/seq_proc/10011010.006/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       MEDIUM   14/04/93 06:40:12 0.32E+02      152     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            152       104             48         0         0         0
 Writing events file
    104 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           152       104             48         0         0         0
   in      32.00 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events ad10011010g300370m.evt
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-GIS3-PH > filter region ad10011010g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad10011010g300370m_1.ulc use_events=yes
Wrote events list to file ad10011010g300370m_1.ulc
Changing Data directory from:
    /data/data15/seq_proc/10011010.006/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 IC443    BRIGHT   HIGH     14/04/93 06:25:04 0.96E+04    74910 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          74910     61130          13780         0         0         0
 Writing events file
  61130 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         74910     61130          13780         0         0         0
   in    9591.02 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events ad10011010s000102h.evt
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-SIS0-BRIGHT > filter region ad10011010s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=ad10011010s000102h_1.ulc use_events=yes
Wrote events list to file ad10011010s000102h_1.ulc
Changing Data directory from:
    /data/data15/seq_proc/10011010.006/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 IC443    BRIGHT2  HIGH     14/04/93 06:25:04 0.96E+04    75932 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s000112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          75932     61869          14063         0         0         0
 Writing events file
  61869 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         75932     61869          14063         0         0         0
   in    9591.02 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events ad10011010s000112h.evt
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad10011010s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT2 > extract events
!xsel:ASCA-SIS0-BRIGHT2 > save events outfile=ad10011010s000112h_1.ulc use_events=yes
Wrote events list to file ad10011010s000112h_1.ulc
Changing Data directory from:
    /data/data15/seq_proc/10011010.006/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 IC443    BRIGHT   MEDIUM   14/04/93 05:09:00 0.77E+04    59639 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          59639     49340          10299         0         0         0
 Writing events file
  49340 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         59639     49340          10299         0         0         0
   in    7730.66 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events ad10011010s000202m.evt
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-SIS0-BRIGHT > filter region ad10011010s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=ad10011010s000202m_1.ulc use_events=yes
Wrote events list to file ad10011010s000202m_1.ulc
Changing Data directory from:
    /data/data15/seq_proc/10011010.006/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT   HIGH     14/04/93 06:25:04 0.12E+05    98329 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          98329     79610          18719         0         0         0
 Writing events file
  79610 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         98329     79610          18719         0         0         0
   in   11603.15 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events ad10011010s100102h.evt
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-SIS1-BRIGHT > filter region ad10011010s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=ad10011010s100102h_1.ulc use_events=yes
Wrote events list to file ad10011010s100102h_1.ulc
Changing Data directory from:
    /data/data15/seq_proc/10011010.006/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT2  HIGH     14/04/93 06:25:04 0.12E+05    99213 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s100112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          99213     80295          18918         0         0         0
 Writing events file
  80295 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         99213     80295          18918         0         0         0
   in   11603.15 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events ad10011010s100112h.evt
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad10011010s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > extract events
!xsel:ASCA-SIS1-BRIGHT2 > save events outfile=ad10011010s100112h_1.ulc use_events=yes
Wrote events list to file ad10011010s100112h_1.ulc
Changing Data directory from:
    /data/data15/seq_proc/10011010.006/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT   MEDIUM   14/04/93 05:09:00 0.79E+04    67768 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          67768     54488          13280         0         0         0
 Writing events file
  54488 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         67768     54488          13280         0         0         0
   in    7914.66 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events ad10011010s100202m.evt
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-SIS1-BRIGHT > filter region ad10011010s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=ad10011010s100202m_1.ulc use_events=yes
Wrote events list to file ad10011010s100202m_1.ulc
Changing Data directory from:
    /data/data15/seq_proc/10011010.006/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT   HIGH     14/04/93 08:06:08 0.20E+01       29 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s100402h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             29        27              2         0         0         0
 Writing events file
     27 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
            29        27              2         0         0         0
   in       1.97 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events ad10011010s100402h.evt
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-SIS1-BRIGHT > filter region ad10011010s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=ad10011010s100402h_1.ulc use_events=yes
Wrote events list to file ad10011010s100402h_1.ulc
Changing Data directory from:
    /data/data15/seq_proc/10011010.006/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT2  HIGH     14/04/93 08:06:08 0.20E+01       29 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s100412h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             29        27              2         0         0         0
 Writing events file
     27 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
            29        27              2         0         0         0
   in       1.97 seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events ad10011010s100412h.evt
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad10011010s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > extract events
!xsel:ASCA-SIS1-BRIGHT2 > save events outfile=ad10011010s100412h_1.ulc use_events=yes
Wrote events list to file ad10011010s100412h_1.ulc
Changing Data directory from:
    /data/data15/seq_proc/10011010.006/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

Extracting FRAME mode data ( 23:07:39 )

 *** tlmFrm Version 1.1 (1997-08-25) *** 
total number of superframes: 19479

Total of 0 sets of frame data are extracted.

Extracting GIS calibration source spectra ( 23:08:31 )

1 ad10011010g200170h.unf 304367
1 ad10011010g200270m.unf 304367
1 ad10011010g200370m.unf 304367

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.31E+05   160068     1024
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.31E+05   160068     1024
      2 IC443    PH       MEDIUM   14/04/93 05:16:28 0.26E+05   143441     1024
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.31E+05   160068     1024
      2 IC443    PH       MEDIUM   14/04/93 05:16:28 0.26E+05   143441     1024
      3 IC443    PH       MEDIUM   14/04/93 06:40:12 0.16E+03      858     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         160068     15712         144356         0         0         0
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         143441     13496         129945         0         0         0
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200370m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
            858       100            758         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        304367     29308         275059         0         0         0
   in   57811.80 seconds
 Spectrum         has    29308 counts for 0.5070     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 57812.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 3.57971E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1992a           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10011010g220170.cal
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events ad10011010g200170h.unf
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-GIS2-PH > read events ad10011010g200270m.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-GIS2-PH > read events ad10011010g200370m.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-GIS2-PH > filter region GIS2_CALSRC256.2
!xsel:ASCA-GIS2-PH > extract spectrum
!xsel:ASCA-GIS2-PH > save spectrum ad10011010g220170.cal group=yes
Wrote spectrum to ad10011010g220170.cal
!xsel:ASCA-GIS2-PH > exit save_session=no

 
               XSPEC 9.01 23:09:34 16-May-98
 
 Plot device not set, use "cpd" to set it
 
 Type "help" or "?" for further information
!XSPEC> query yes
Querying disabled - assuming answer is yes
!XSPEC> data ad10011010g220170.cal
 Net count rate (cts/s) for file   1  0.5070    +/-  2.9615E-03
   1 data set is in use
!XSPEC> ignore bad
!XSPEC> ignore **-4.0
!XSPEC> ignore 8.0-**
!XSPEC> model const/b + gauss/b + gauss/b
Background components must be from the additive model list
  mo = constant[1] ) + gaussian/b[2] + gaussian/b[3]
 Input parameter value, delta, min, bot, top, and max values for ...
 Mod parameter  1 of component  1 constant factor
    1.000      1.0000E-02      0.          0.      1.0000E+10  1.0000E+10
!
 Mod parameter  2 of component  2 gaussian LineE
    6.500      5.0000E-02      0.          0.      1.0000E+06  1.0000E+06
! 5.9
 Mod parameter  3 of component  2 gaussian Sigma
   0.1000      5.0000E-02      0.          0.       10.00       20.00
! 0.0
 Mod parameter  4 of component  2 gaussian norm
    1.000      1.0000E-02      0.          0.      1.0000E+24  1.0000E+24
!
 Mod parameter  5 of component  3 gaussian LineE
    6.500      5.0000E-02      0.          0.      1.0000E+06  1.0000E+06
! 6.5
 Mod parameter  6 of component  3 gaussian Sigma
   0.1000      5.0000E-02      0.          0.       10.00       20.00
! 0.0
 Mod parameter  7 of component  3 gaussian norm
    1.000      1.0000E-02      0.          0.      1.0000E+24  1.0000E+24
!
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  mo = constant[1] ) + gaussian/b[2] + gaussian/b[3]
  Model Fit Model   Component     Parameter   Value
  par   par comp
    1    1    1       constant    factor     1.00000     +/-      0.
    2    2    2       gaussian/b  LineE      5.90000     +/-      0.
    3    3    2       gaussian/b  Sigma           0.     +/-      0.
    4    4    2       gaussian/b  norm       1.00000     +/-      0.
    5    5    3       gaussian/b  LineE      6.50000     +/-      0.
    6    6    3       gaussian/b  Sigma           0.     +/-      0.
    7    7    3       gaussian/b  norm       1.00000     +/-      0.
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
    7 variable fit parameters
 Chi-Squared =     8.0095E+05 using    84 PHA bins.
 Reduced chi-squared =     1.0402E+04
!XSPEC> newpar 5 = 2 1.101005
    6 variable fit parameters
 Chi-Squared =     7.9472E+05 using    84 PHA bins.
 Reduced chi-squared =     1.0189E+04
!XSPEC> newpar 6 = 3 1.049288
    5 variable fit parameters
 Chi-Squared =     7.9472E+05 using    84 PHA bins.
 Reduced chi-squared =     1.0060E+04
!XSPEC> renorm
 Chi-Squared =      7691.     using    84 PHA bins.
 Reduced chi-squared =      97.35
!XSPEC> fit
 Chi-Squared  Lvl  Fit param # 1     2           3           4
                 5
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   6056.2      0      1.000       5.893      0.1104      0.1251
              0.1090
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   2391.3      0      1.000       5.860      0.1654      0.1920
              9.5810E-02
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   1078.5     -1      1.000       5.905      0.1878      0.2735
              6.3353E-02
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   1019.6     -2      1.000       5.930      0.1999      0.2975
              4.7117E-02
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   1011.2     -3      1.000       5.918      0.1898      0.2910
              5.3483E-02
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   1010.5     -4      1.000       5.922      0.1926      0.2938
              5.0739E-02
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   1010.1     -5      1.000       5.920      0.1911      0.2926
              5.1839E-02
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   1010.1      0      1.000       5.920      0.1911      0.2927
              5.1768E-02
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   1010.1      0      1.000       5.921      0.1911      0.2927
              5.1716E-02
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  mo = constant[1] ) + gaussian/b[2] + gaussian/b[3]
  Model Fit Model   Component     Parameter   Value
  par   par comp
    1    1    1       constant    factor     1.00000     +/- -1.0000
    2    2    2       gaussian/b  LineE      5.92053     +/- 0.38100E-02
    3    3    2       gaussian/b  Sigma     0.191129     +/- 0.40193E-02
    4    4    2       gaussian/b  norm      0.292750     +/- 0.29825E-02
    5    2    3       gaussian/b  LineE      6.51854     = par   2 *  1.1010
    6    3    3       gaussian/b  Sigma     0.200549     = par   3 *  1.0493
    7    5    3       gaussian/b  norm      5.171619E-02 +/- 0.21404E-02
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =      1010.     using    84 PHA bins.
 Reduced chi-squared =      12.79
!XSPEC> setplot energy
!XSPEC> iplot data
!PLT> label top GIS2 Calibration Source, should peak near 5.9 keV
!PLT> log x off
!PLT> rescale x 4 8
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
 XSPEC: quit

1 ad10011010g300170h.unf 300810
1 ad10011010g300270m.unf 300810
1 ad10011010g300370m.unf 300810

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.31E+05   158395     1024
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.31E+05   158395     1024
      2 IC443    PH       MEDIUM   14/04/93 05:16:28 0.26E+05   141619     1024
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.31E+05   158395     1024
      2 IC443    PH       MEDIUM   14/04/93 05:16:28 0.26E+05   141619     1024
      3 IC443    PH       MEDIUM   14/04/93 06:40:12 0.16E+03      796     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Getting FITS WCS Keywords
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         158395     14248         144147         0         0         0
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         141619     12397         129222         0         0         0
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300370m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
            796        84            712         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        300810     26729         274081         0         0         0
   in   57691.80 seconds
 Spectrum         has    26729 counts for 0.4633     counts/sec
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    -                 Instrument filter in use
  EXPOSURE  - 57692.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.83356E-02     Background scaling factor
  BACKFILE  - NONE            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - NONE            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  XFLT0001  - none            XSPEC selection filter
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1992a           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad10011010g320170.cal
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA > read events ad10011010g300170h.unf
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-GIS3-PH > read events ad10011010g300270m.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-GIS3-PH > read events ad10011010g300370m.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!xsel:ASCA-GIS3-PH > filter region GIS3_CALSRC256.2
!xsel:ASCA-GIS3-PH > extract spectrum
!xsel:ASCA-GIS3-PH > save spectrum ad10011010g320170.cal group=yes
Wrote spectrum to ad10011010g320170.cal
!xsel:ASCA-GIS3-PH > exit save_session=no

 
               XSPEC 9.01 23:10:45 16-May-98
 
 Plot device not set, use "cpd" to set it
 
 Type "help" or "?" for further information
!XSPEC> query yes
Querying disabled - assuming answer is yes
!XSPEC> data ad10011010g320170.cal
 Net count rate (cts/s) for file   1  0.4633    +/-  2.8341E-03
   1 data set is in use
!XSPEC> ignore bad
!XSPEC> ignore **-4.0
!XSPEC> ignore 8.0-**
!XSPEC> model const/b + gauss/b + gauss/b
Background components must be from the additive model list
  mo = constant[1] ) + gaussian/b[2] + gaussian/b[3]
 Input parameter value, delta, min, bot, top, and max values for ...
 Mod parameter  1 of component  1 constant factor
    1.000      1.0000E-02      0.          0.      1.0000E+10  1.0000E+10
!
 Mod parameter  2 of component  2 gaussian LineE
    6.500      5.0000E-02      0.          0.      1.0000E+06  1.0000E+06
! 5.9
 Mod parameter  3 of component  2 gaussian Sigma
   0.1000      5.0000E-02      0.          0.       10.00       20.00
! 0.0
 Mod parameter  4 of component  2 gaussian norm
    1.000      1.0000E-02      0.          0.      1.0000E+24  1.0000E+24
!
 Mod parameter  5 of component  3 gaussian LineE
    6.500      5.0000E-02      0.          0.      1.0000E+06  1.0000E+06
! 6.5
 Mod parameter  6 of component  3 gaussian Sigma
   0.1000      5.0000E-02      0.          0.       10.00       20.00
! 0.0
 Mod parameter  7 of component  3 gaussian norm
    1.000      1.0000E-02      0.          0.      1.0000E+24  1.0000E+24
!
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  mo = constant[1] ) + gaussian/b[2] + gaussian/b[3]
  Model Fit Model   Component     Parameter   Value
  par   par comp
    1    1    1       constant    factor     1.00000     +/-      0.
    2    2    2       gaussian/b  LineE      5.90000     +/-      0.
    3    3    2       gaussian/b  Sigma           0.     +/-      0.
    4    4    2       gaussian/b  norm       1.00000     +/-      0.
    5    5    3       gaussian/b  LineE      6.50000     +/-      0.
    6    6    3       gaussian/b  Sigma           0.     +/-      0.
    7    7    3       gaussian/b  norm       1.00000     +/-      0.
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
    7 variable fit parameters
 Chi-Squared =     7.9133E+05 using    84 PHA bins.
 Reduced chi-squared =     1.0277E+04
!XSPEC> newpar 5 = 2 1.101005
    6 variable fit parameters
 Chi-Squared =     7.8491E+05 using    84 PHA bins.
 Reduced chi-squared =     1.0063E+04
!XSPEC> newpar 6 = 3 1.049288
    5 variable fit parameters
 Chi-Squared =     7.8491E+05 using    84 PHA bins.
 Reduced chi-squared =      9936.
!XSPEC> renorm
 Chi-Squared =      6382.     using    84 PHA bins.
 Reduced chi-squared =      80.79
!XSPEC> fit
 Chi-Squared  Lvl  Fit param # 1     2           3           4
                 5
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   4983.2      0      1.000       5.894      0.1083      0.1238
              0.1100
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   2477.0      0      1.000       5.875      0.1540      0.1772
              9.7040E-02
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   1013.0     -1      1.000       5.945      0.1738      0.2503
              6.1771E-02
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   817.61     -2      1.000       5.992      0.1900      0.2887
              3.8291E-02
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   792.56     -3      1.000       5.974      0.1736      0.2801
              4.6697E-02
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   790.65     -4      1.000       5.979      0.1763      0.2829
              4.3785E-02
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   790.20     -5      1.000       5.978      0.1748      0.2821
              4.4642E-02
 Due to zero model norms
  fit parameter  1 is temporarily frozen
   790.19      0      1.000       5.978      0.1748      0.2821
              4.4595E-02
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  mo = constant[1] ) + gaussian/b[2] + gaussian/b[3]
  Model Fit Model   Component     Parameter   Value
  par   par comp
    1    1    1       constant    factor     1.00000     +/- -1.0000
    2    2    2       gaussian/b  LineE      5.97787     +/- 0.34186E-02
    3    3    2       gaussian/b  Sigma     0.174797     +/- 0.38992E-02
    4    4    2       gaussian/b  norm      0.282096     +/- 0.27336E-02
    5    2    3       gaussian/b  LineE      6.58166     = par   2 *  1.1010
    6    3    3       gaussian/b  Sigma     0.183412     = par   3 *  1.0493
    7    5    3       gaussian/b  norm      4.459466E-02 +/- 0.17941E-02
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =      790.2     using    84 PHA bins.
 Reduced chi-squared =      10.00
!XSPEC> setplot energy
!XSPEC> iplot data
!PLT> label top GIS3 Calibration Source, should peak near 5.9 keV
!PLT> log x off
!PLT> rescale x 4 8
!PLT> hard /ps
!PLT> quit
!XSPEC> exit
!Do you really want to exit (y) y
 XSPEC: quit

Extracting bright and dark Earth event files. ( 23:10:56 )

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 IC443    BRIGHT   HIGH     14/04/93 06:25:04 0.28E+05   278067 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s000102h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         278067     55663              0    222404         0         0
 Writing events file
  55663 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        278067     55663              0    222404         0         0
   in    8868.78 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA > read events ad10011010s000102h.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad10011010s000102h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        55663
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              72       34377
 Flickering pixels iter, pixels & cnts :   1          64        1253
cleaning chip #           1
 Hot pixels & counts                   :              26        8718
 Flickering pixels iter, pixels & cnts :   1          34         399
cleaning chip #           2
 Hot pixels & counts                   :              26        3211
 Flickering pixels iter, pixels & cnts :   1          43         331
cleaning chip #           3
 Hot pixels & counts                   :              21        5160
 Flickering pixels iter, pixels & cnts :   1         140         821
 
 Number of pixels rejected           :          426
 Number of (internal) image counts   :        55663
 Number of image cts rejected (N, %) :        54270     97.4974365
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :           136           60           69          161
 
 Image counts      :         36035         9380         3800         6448
 Image cts rejected:         35630         9117         3542         5981
 Image cts rej (%) :         98.88        97.20        93.21        92.76
 
    filtering data...
 
 Total counts      :         36035         9380         3800         6448
 Total cts rejected:         35630         9117         3542         5981
 Total cts rej (%) :         98.88        97.20        93.21        92.76
 
 Number of clean counts accepted  :         1393
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          426
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 IC443    BRIGHT2  HIGH     14/04/93 06:25:04 0.28E+05   301669 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s000112h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         301669     59559              0    242110         0         0
 Writing events file
  59559 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        301669     59559              0    242110         0         0
   in    8868.78 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA > read events ad10011010s000112h.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA-SIS0-BRIGHT2 > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS0-BRIGHT2 > extract events
!earthevents:ASCA-SIS0-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT2 > exit save_session=no

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad10011010s000112h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        59559
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              75       36370
 Flickering pixels iter, pixels & cnts :   1          73        1253
cleaning chip #           1
 Hot pixels & counts                   :              27        8860
 Flickering pixels iter, pixels & cnts :   1          40         449
cleaning chip #           2
 Hot pixels & counts                   :              27        3303
 Flickering pixels iter, pixels & cnts :   1          48         377
cleaning chip #           3
 Hot pixels & counts                   :              21        5543
 Flickering pixels iter, pixels & cnts :   1         155         963
 
 Number of pixels rejected           :          466
 Number of (internal) image counts   :        59559
 Number of image cts rejected (N, %) :        57118     95.9015427
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :           148           67           75          176
 
 Image counts      :         38293         9868         4211         7187
 Image cts rejected:         37623         9309         3680         6506
 Image cts rej (%) :         98.25        94.34        87.39        90.52
 
    filtering data...
 
 Total counts      :         38293         9868         4211         7187
 Total cts rejected:         37623         9309         3680         6506
 Total cts rej (%) :         98.25        94.34        87.39        90.52
 
 Number of clean counts accepted  :         2441
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          466
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 IC443    BRIGHT   MEDIUM   14/04/93 05:09:00 0.30E+05   293699 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s000202m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         293699     45035              0    248664         0         0
 Writing events file
  45035 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        293699     45035              0    248664         0         0
   in    7881.08 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA > read events ad10011010s000202m.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad10011010s000202m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        45035
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              71       27990
 Flickering pixels iter, pixels & cnts :   1          44         914
cleaning chip #           1
 Hot pixels & counts                   :              26        6852
 Flickering pixels iter, pixels & cnts :   1          92         475
cleaning chip #           2
 Hot pixels & counts                   :              23        2514
 Flickering pixels iter, pixels & cnts :   1          40         275
cleaning chip #           3
 Hot pixels & counts                   :              19        4171
 Flickering pixels iter, pixels & cnts :   1          34         277
 
 Number of pixels rejected           :          349
 Number of (internal) image counts   :        45035
 Number of image cts rejected (N, %) :        43468     96.5204849
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :           115          118           63           53
 
 Image counts      :         29263         7811         3151         4810
 Image cts rejected:         28904         7327         2789         4448
 Image cts rej (%) :         98.77        93.80        88.51        92.47
 
    filtering data...
 
 Total counts      :         29263         7811         3151         4810
 Total cts rejected:         28904         7327         2789         4448
 Total cts rej (%) :         98.77        93.80        88.51        92.47
 
 Number of clean counts accepted  :         1567
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          349
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 IC443    BRIGHT   HIGH     14/04/93 04:19:48 0.22E+04    25174 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s000302h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          25174      1725              0     23449         0         0
 Writing events file
   1725 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         25174      1725              0     23449         0         0
   in     314.10 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA > read events ad10011010s000302h.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad10011010s000302h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1725
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              67        1027
 Flickering pixels iter, pixels & cnts :   1          13          70
cleaning chip #           1
 Hot pixels & counts                   :              21         284
 Flickering pixels iter, pixels & cnts :   1           2           6
cleaning chip #           2
 Hot pixels & counts                   :              11          82
 Flickering pixels iter, pixels & cnts :   1           2           6
cleaning chip #           3
 Hot pixels & counts                   :              12         125
 Flickering pixels iter, pixels & cnts :   1           3           9
 
 Number of pixels rejected           :          131
 Number of (internal) image counts   :         1725
 Number of image cts rejected (N, %) :         1609     93.2753601
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            80           23           13           15
 
 Image counts      :          1128          322          124          151
 Image cts rejected:          1097          290           88          134
 Image cts rej (%) :         97.25        90.06        70.97        88.74
 
    filtering data...
 
 Total counts      :          1128          322          124          151
 Total cts rejected:          1097          290           88          134
 Total cts rej (%) :         97.25        90.06        70.97        88.74
 
 Number of clean counts accepted  :          116
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          131
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 IC443    BRIGHT   HIGH     14/04/93 08:22:08 0.25E+03     1677 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s000402h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           1677      1677              0         0         0         0
 Writing events file
   1677 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1677      1677              0         0         0         0
   in     249.66 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA > read events ad10011010s000402h.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad10011010s000402h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1677
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              63        1068
 Flickering pixels iter, pixels & cnts :   1           9          55
cleaning chip #           1
 Hot pixels & counts                   :              17         234
 Flickering pixels iter, pixels & cnts :   1           2           7
cleaning chip #           2
 Hot pixels & counts                   :              10          93
 Flickering pixels iter, pixels & cnts :   1           2           6
cleaning chip #           3
 Hot pixels & counts                   :              12         144
 Flickering pixels iter, pixels & cnts :   1           2           7
 
 Number of pixels rejected           :          117
 Number of (internal) image counts   :         1677
 Number of image cts rejected (N, %) :         1614     96.2432938
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            72           19           12           14
 
 Image counts      :          1143          256          118          160
 Image cts rejected:          1123          241           99          151
 Image cts rej (%) :         98.25        94.14        83.90        94.38
 
    filtering data...
 
 Total counts      :          1143          256          118          160
 Total cts rejected:          1123          241           99          151
 Total cts rej (%) :         98.25        94.14        83.90        94.38
 
 Number of clean counts accepted  :           63
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          117
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S0CCDPOW
      1 IC443    BRIGHT2  HIGH     14/04/93 08:22:08 0.25E+03     1766 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s000412h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           1766      1766              0         0         0         0
 Writing events file
   1766 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1766      1766              0         0         0         0
   in     249.66 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA > read events ad10011010s000412h.unf
Got new instrument: SIS0
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA-SIS0-BRIGHT2 > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS0-BRIGHT2 > extract events
!earthevents:ASCA-SIS0-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT2 > exit save_session=no

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad10011010s000412h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1766
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              63        1096
 Flickering pixels iter, pixels & cnts :   1          12          84
cleaning chip #           1
 Hot pixels & counts                   :              17         235
 Flickering pixels iter, pixels & cnts :   1           2           7
cleaning chip #           2
 Hot pixels & counts                   :              10          93
 Flickering pixels iter, pixels & cnts :   1           2           6
cleaning chip #           3
 Hot pixels & counts                   :              13         155
 Flickering pixels iter, pixels & cnts :   1           1           4
 
 Number of pixels rejected           :          120
 Number of (internal) image counts   :         1766
 Number of image cts rejected (N, %) :         1680     95.1302414
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            75           19           12           14
 
 Image counts      :          1207          264          122          173
 Image cts rejected:          1180          242           99          159
 Image cts rej (%) :         97.76        91.67        81.15        91.91
 
    filtering data...
 
 Total counts      :          1207          264          122          173
 Total cts rejected:          1180          242           99          159
 Total cts rej (%) :         97.76        91.67        81.15        91.91
 
 Number of clean counts accepted  :           86
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          120
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT   HIGH     14/04/93 06:25:04 0.28E+05   295359 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s100102h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         295359     47672              0    247687         0         0
 Writing events file
  47672 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        295359     47672              0    247687         0         0
   in    8868.90 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA > read events ad10011010s100102h.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad10011010s100102h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        47672
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              36        9132
 Flickering pixels iter, pixels & cnts :   1          68         710
cleaning chip #           1
 Hot pixels & counts                   :              39       13095
 Flickering pixels iter, pixels & cnts :   1         122         952
cleaning chip #           2
 Hot pixels & counts                   :              35       11932
 Flickering pixels iter, pixels & cnts :   1          38         486
cleaning chip #           3
 Hot pixels & counts                   :              33        9074
 Flickering pixels iter, pixels & cnts :   1          46         487
 
 Number of pixels rejected           :          417
 Number of (internal) image counts   :        47672
 Number of image cts rejected (N, %) :        45868     96.2158051
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :           104          161           73           79
 
 Image counts      :         10350        14655        12777         9890
 Image cts rejected:          9842        14047        12418         9561
 Image cts rej (%) :         95.09        95.85        97.19        96.67
 
    filtering data...
 
 Total counts      :         10350        14655        12777         9890
 Total cts rejected:          9842        14047        12418         9561
 Total cts rej (%) :         95.09        95.85        97.19        96.67
 
 Number of clean counts accepted  :         1804
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          417
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT2  HIGH     14/04/93 06:25:04 0.28E+05   320404 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s100112h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         320404     52571              0    267833         0         0
 Writing events file
  52571 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        320404     52571              0    267833         0         0
   in    8868.90 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA > read events ad10011010s100112h.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS1-BRIGHT2 > extract events
!earthevents:ASCA-SIS1-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT2 > exit save_session=no

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad10011010s100112h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        52571
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              37        9885
 Flickering pixels iter, pixels & cnts :   1          71         729
cleaning chip #           1
 Hot pixels & counts                   :              39       13218
 Flickering pixels iter, pixels & cnts :   1         139        1054
cleaning chip #           2
 Hot pixels & counts                   :              34       12321
 Flickering pixels iter, pixels & cnts :   1          43         579
cleaning chip #           3
 Hot pixels & counts                   :              32       11038
 Flickering pixels iter, pixels & cnts :   1          54         655
 
 Number of pixels rejected           :          449
 Number of (internal) image counts   :        52571
 Number of image cts rejected (N, %) :        49479     94.1184311
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :           108          178           77           86
 
 Image counts      :         11463        15208        13571        12329
 Image cts rejected:         10614        14272        12900        11693
 Image cts rej (%) :         92.59        93.85        95.06        94.84
 
    filtering data...
 
 Total counts      :         11463        15208        13571        12329
 Total cts rejected:         10614        14272        12900        11693
 Total cts rej (%) :         92.59        93.85        95.06        94.84
 
 Number of clean counts accepted  :         3092
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          449
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT   MEDIUM   14/04/93 05:09:00 0.30E+05   312611 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s100202m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         312611     40118              0    272493         0         0
 Writing events file
  40118 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        312611     40118              0    272493         0         0
   in    7881.08 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA > read events ad10011010s100202m.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad10011010s100202m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        40118
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              34        7745
 Flickering pixels iter, pixels & cnts :   1          64         720
cleaning chip #           1
 Hot pixels & counts                   :              34       10430
 Flickering pixels iter, pixels & cnts :   1          51         546
cleaning chip #           2
 Hot pixels & counts                   :              34       10045
 Flickering pixels iter, pixels & cnts :   1         114         692
cleaning chip #           3
 Hot pixels & counts                   :              31        7692
 Flickering pixels iter, pixels & cnts :   1          40         446
 
 Number of pixels rejected           :          402
 Number of (internal) image counts   :        40118
 Number of image cts rejected (N, %) :        38316     95.5082474
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            98           85          148           71
 
 Image counts      :          8877        11367        11331         8543
 Image cts rejected:          8465        10976        10737         8138
 Image cts rej (%) :         95.36        96.56        94.76        95.26
 
    filtering data...
 
 Total counts      :          8877        11367        11331         8543
 Total cts rejected:          8465        10976        10737         8138
 Total cts rej (%) :         95.36        96.56        94.76        95.26
 
 Number of clean counts accepted  :         1802
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          402
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT   HIGH     14/04/93 04:19:44 0.23E+04    23965 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s100302h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          23965      1718              0     22247         0         0
 Writing events file
   1718 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         23965      1718              0     22247         0         0
   in     330.04 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA > read events ad10011010s100302h.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad10011010s100302h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1718
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              18         265
 Flickering pixels iter, pixels & cnts :   1          13          53
cleaning chip #           1
 Hot pixels & counts                   :              23         398
 Flickering pixels iter, pixels & cnts :   1          10          41
cleaning chip #           2
 Hot pixels & counts                   :              25         445
 Flickering pixels iter, pixels & cnts :   1           7          28
cleaning chip #           3
 Hot pixels & counts                   :              19         273
 Flickering pixels iter, pixels & cnts :   1           4          17
 
 Number of pixels rejected           :          119
 Number of (internal) image counts   :         1718
 Number of image cts rejected (N, %) :         1520     88.4749680
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            31           33           32           23
 
 Image counts      :           380          478          521          339
 Image cts rejected:           318          439          473          290
 Image cts rej (%) :         83.68        91.84        90.79        85.55
 
    filtering data...
 
 Total counts      :           380          478          521          339
 Total cts rejected:           318          439          473          290
 Total cts rej (%) :         83.68        91.84        90.79        85.55
 
 Number of clean counts accepted  :          198
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          119
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT   HIGH     14/04/93 08:06:08 0.23E+03     1414 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s100402h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           1414      1378              0        36         0         0
 Writing events file
   1378 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1414      1378              0        36         0         0
   in     225.47 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA > read events ad10011010s100402h.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad10011010s100402h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1378
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              20         240
 Flickering pixels iter, pixels & cnts :   1           8          33
cleaning chip #           1
 Hot pixels & counts                   :              23         315
 Flickering pixels iter, pixels & cnts :   1           9          34
cleaning chip #           2
 Hot pixels & counts                   :              24         386
 Flickering pixels iter, pixels & cnts :   1           4          17
cleaning chip #           3
 Hot pixels & counts                   :              17         210
 Flickering pixels iter, pixels & cnts :   1           6          26
 
 Number of pixels rejected           :          111
 Number of (internal) image counts   :         1378
 Number of image cts rejected (N, %) :         1261     91.5094376
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            28           32           28           23
 
 Image counts      :           309          374          431          264
 Image cts rejected:           273          349          403          236
 Image cts rej (%) :         88.35        93.32        93.50        89.39
 
    filtering data...
 
 Total counts      :           309          374          431          264
 Total cts rejected:           273          349          403          236
 Total cts rej (%) :         88.35        93.32        93.50        89.39
 
 Number of clean counts accepted  :          117
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          111
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  S1CCDPOW
      1 IC443    BRIGHT2  HIGH     14/04/93 08:06:08 0.23E+03     1556 1111
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010s100412h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           1556      1514              0        42         0         0
 Writing events file
   1514 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1556      1514              0        42         0         0
   in     225.47 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA > read events ad10011010s100412h.unf
Got new instrument: SIS1
 
Setting: IMAGE binning    =    4
         WMAP binning     =    8
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-SIS1-BRIGHT2 > extract events
!earthevents:ASCA-SIS1-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT2 > exit save_session=no

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad10011010s100412h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1514
 
    copy bad pix array...
cleaning chip #           0
 Hot pixels & counts                   :              21         261
 Flickering pixels iter, pixels & cnts :   1           9          37
cleaning chip #           1
 Hot pixels & counts                   :              24         328
 Flickering pixels iter, pixels & cnts :   1           8          30
cleaning chip #           2
 Hot pixels & counts                   :              24         393
 Flickering pixels iter, pixels & cnts :   1           4          17
cleaning chip #           3
 Hot pixels & counts                   :              21         280
 Flickering pixels iter, pixels & cnts :   1           5          21
 
 Number of pixels rejected           :          116
 Number of (internal) image counts   :         1514
 Number of image cts rejected (N, %) :         1367     90.2906189
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            30           32           28           26
 
 Image counts      :           337          386          453          338
 Image cts rejected:           298          358          410          301
 Image cts rej (%) :         88.43        92.75        90.51        89.05
 
    filtering data...
 
 Total counts      :           337          386          453          338
 Total cts rejected:           298          358          410          301
 Total cts rej (%) :         88.43        92.75        90.51        89.05
 
 Number of clean counts accepted  :          147
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          116
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.31E+05   160068     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         160068     17700              0    142368         0         0
 Writing events file
  17700 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        160068     17700              0    142368         0         0
   in    9626.57 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA > read events ad10011010g200170h.unf
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.31E+05   160068     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         160068      5119              0    154949         0         0
 Writing events file
   5119 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        160068      5119              0    154949         0         0
   in    1789.50 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA > read events ad10011010g200170h.unf
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       MEDIUM   14/04/93 05:16:28 0.26E+05   143441     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         143441     14017              0    129424         0         0
 Writing events file
  14017 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        143441     14017              0    129424         0         0
   in    6820.30 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA > read events ad10011010g200270m.unf
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       MEDIUM   14/04/93 05:16:28 0.26E+05   143441     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         143441      8930              0    134511         0         0
 Writing events file
   8930 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        143441      8930              0    134511         0         0
   in    2615.83 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA > read events ad10011010g200270m.unf
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       MEDIUM   14/04/93 06:40:12 0.16E+03      858     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g200370m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
            858       391              0       467         0         0
 Writing events file
    391 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           858       391              0       467         0         0
   in      96.00 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA > read events ad10011010g200370m.unf
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       MEDIUM   14/04/93 06:40:12 0.16E+03      858     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data15/seq_proc/10011010.006/ad10011010g200370m.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA > read events ad10011010g200370m.unf
Got new instrument: GIS2
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.31E+05   158395     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         158395     16090              0    142305         0         0
 Writing events file
  16090 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        158395     16090              0    142305         0         0
   in    9618.57 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA > read events ad10011010g300170h.unf
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       HIGH     14/04/93 04:20:02 0.31E+05   158395     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         158395      4617              0    153778         0         0
 Writing events file
   4617 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        158395      4617              0    153778         0         0
   in    1779.50 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA > read events ad10011010g300170h.unf
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       MEDIUM   14/04/93 05:16:28 0.26E+05   141619     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         141619     12879              0    128740         0         0
 Writing events file
  12879 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        141619     12879              0    128740         0         0
   in    6804.30 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA > read events ad10011010g300270m.unf
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       MEDIUM   14/04/93 05:16:28 0.26E+05   141619     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         141619      8449              0    133170         0         0
 Writing events file
   8449 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        141619      8449              0    133170         0         0
   in    2615.83 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA > read events ad10011010g300270m.unf
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       MEDIUM   14/04/93 06:40:12 0.16E+03      796     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Doing file: /data/data15/seq_proc/10011010.006/ad10011010g300370m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
            796       326              0       470         0         0
 Writing events file
    326 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           796       326              0       470         0         0
   in      96.00 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA > read events ad10011010g300370m.unf
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

 
                         **  XSELECT V1.3   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
 
 
        OBJECT   DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME   NEVENTS  PHA_BINS
      1 IC443    PH       MEDIUM   14/04/93 06:40:12 0.16E+03      796     1024
 
EXTRACTOR vers 2.0  11 Apr 1997.
 Skipping file: /data/data15/seq_proc/10011010.006/ad10011010g300370m.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in       0.00 seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Keywords for time and pha are  TIME       PI
 Units of time are              s
 Default timing binsize =    16.00
 Keywords for images are          DETX       DETY
 Keywords for the WMAP are        DETX       DETY
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data15/seq_proc/10011010.006/
Setting mkf directory to /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA > read events ad10011010g300370m.unf
Got new instrument: GIS3
 
Setting: IMAGE binning    =    1
         WMAP binning     =    1
         Energy Column    =  PI
         Energy rebinning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data15/seq_proc/10011010.006/
HK Directory is: /data/data15/seq_proc/10011010.006/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=. ASCA_mkf_def_expr=ft*.mkf
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

Determining information about this observation ( 23:35:26 )

 Offset of  1.500000000000000E+08 from 1/1/93     0:0:0
 is date and time (including leapseconds) = 3/10/97    2:39:56.000000
 Modified Julian Day    =   50724.111064814816928

Generating event file information page ( 23:37:12 )

ad10011010s000102h.unf|S0CCDLST|0 1 2 3|S0 CCD readout order
ad10011010s000302h.unf|S0CCDLST|0 1 2 3|S0 CCD readout order
ad10011010s000402h.unf|S0CCDLST|0 3 1 2|S0 CCD readout order
ad10011010s000102h.unf|ORIGMODE|FAINT|DATAMODE before any conversion
ad10011010s000302h.unf|ORIGMODE|BRIGHT|DATAMODE before any conversion
ad10011010s000402h.unf|ORIGMODE|FAINT|DATAMODE before any conversion

ad10011010s000112h.unf|S0CCDLST|0 1 2 3|S0 CCD readout order
ad10011010s000412h.unf|S0CCDLST|0 3 1 2|S0 CCD readout order

ad10011010s000101h.unf|S0CCDLST|0 1 2 3|S0 CCD readout order
ad10011010s000401h.unf|S0CCDLST|0 3 1 2|S0 CCD readout order

ad10011010s100102h.unf|S1BIASHV|1|S1 Bias selection
ad10011010s100302h.unf|S1BIASHV|1|S1 Bias selection
ad10011010s100402h.unf|S1BIASHV|0|S1 Bias selection
ad10011010s100102h.unf|ORIGMODE|FAINT|DATAMODE before any conversion
ad10011010s100302h.unf|ORIGMODE|BRIGHT|DATAMODE before any conversion
ad10011010s100402h.unf|ORIGMODE|FAINT|DATAMODE before any conversion

ad10011010s100112h.unf|S1BIASHV|1|S1 Bias selection
ad10011010s100412h.unf|S1BIASHV|0|S1 Bias selection

ad10011010s100101h.unf|S1BIASHV|1|S1 Bias selection
ad10011010s100401h.unf|S1BIASHV|0|S1 Bias selection

ad10011010g200270m.unf|SP_A_L_P|0|Spread discri A_L for POW2 method (0-255)
ad10011010g200370m.unf|SP_A_L_P|255|Spread discri A_L for POW2 method (0-255)
ad10011010g200270m.unf|SP_B_P|0|Spread discri B for POW2 method (0-255)
ad10011010g200370m.unf|SP_B_P|255|Spread discri B for POW2 method (0-255)
ad10011010g200270m.unf|SP_C_P|0|Spread discri C for POW2 method (0-255)
ad10011010g200370m.unf|SP_C_P|255|Spread discri C for POW2 method (0-255)
ad10011010g200270m.unf|SP_A_L_F|80|Spread discri A_L for FLF method (0-255)
ad10011010g200370m.unf|SP_A_L_F|0|Spread discri A_L for FLF method (0-255)
ad10011010g200270m.unf|SP_A_U_F|240|Spread discri A_U for FLF method (0-255)
ad10011010g200370m.unf|SP_A_U_F|0|Spread discri A_U for FLF method (0-255)
ad10011010g200270m.unf|SP_B_F|128|Spread discri B for FLF method (0-255)
ad10011010g200370m.unf|SP_B_F|120|Spread discri B for FLF method (0-255)
ad10011010g200270m.unf|SP_C_F|0|Spread discri C for FLF method (0-255)
ad10011010g200370m.unf|SP_C_F|120|Spread discri C for FLF method (0-255)
ad10011010g200270m.unf|SP_PH_F|0|Spread discri PH for FLF method (0-1023)
ad10011010g200370m.unf|SP_PH_F|31098|Spread discri PH for FLF method (0-1023)

E2 in eventinfo: Possible missing filtered time for GIS2

ad10011010g300270m.unf|SP_A_L_P|0|Spread discri A_L for POW2 method (0-255)
ad10011010g300370m.unf|SP_A_L_P|255|Spread discri A_L for POW2 method (0-255)
ad10011010g300270m.unf|SP_B_P|0|Spread discri B for POW2 method (0-255)
ad10011010g300370m.unf|SP_B_P|255|Spread discri B for POW2 method (0-255)
ad10011010g300270m.unf|SP_C_P|0|Spread discri C for POW2 method (0-255)
ad10011010g300370m.unf|SP_C_P|255|Spread discri C for POW2 method (0-255)
ad10011010g300270m.unf|SP_A_L_F|80|Spread discri A_L for FLF method (0-255)
ad10011010g300370m.unf|SP_A_L_F|0|Spread discri A_L for FLF method (0-255)
ad10011010g300270m.unf|SP_A_U_F|240|Spread discri A_U for FLF method (0-255)
ad10011010g300370m.unf|SP_A_U_F|0|Spread discri A_U for FLF method (0-255)
ad10011010g300270m.unf|SP_B_F|128|Spread discri B for FLF method (0-255)
ad10011010g300370m.unf|SP_B_F|120|Spread discri B for FLF method (0-255)
ad10011010g300270m.unf|SP_C_F|0|Spread discri C for FLF method (0-255)
ad10011010g300370m.unf|SP_C_F|120|Spread discri C for FLF method (0-255)
ad10011010g300270m.unf|SP_PH_F|0|Spread discri PH for FLF method (0-1023)
ad10011010g300370m.unf|SP_PH_F|31353|Spread discri PH for FLF method (0-1023)

E2 in eventinfo: Possible missing filtered time for GIS3

Creating sequence documentation ( 23:44:47 )

Creating HTML source list ( 23:45:22 )

Listing the files for distribution ( 23:46:43 )

Doing final wrap up of all files ( 23:57:57 )

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Checksum keywords updated successfully.

Processing complete ( 00:28:35 )