OSHA 3143
Informational Booklet on Industrial Hygiene
U.S. Department of Labor
Occupational Safety and Health Administration
OSHA 3143 1998 (Revised)
This informational booklet is intended to provide a generic, non-exhaustive
overview of a particular standards-related topic. This publication does not
itself alter or determine compliance responsibilities, which are set forth
in OSHA standards themselves and the Occupational Safety and Health
Act. Moreover, because interpretations and enforcement policy may
change over time, for additional guidance on OSHA compliance requirements,
the reader should consult current and administrative interpretations and
decisions by the Occupational Safety and Health Review Commission and the
Courts.
Material contained in this publication is in the public domain and may be
reproduced, fully or partially, without permission of the Federal government. Source credit is requested
but not required.
This information will be made available to sensory impaired individuals
upon request.
Voice phone: (202) 219-8615; Telecommunications Device for the Deaf (TDD) message referral
phone: 1-800-326-2577.
Industrial Hygiene |
|
U. S. Department of Labor
Alexis M. Herman, Secretary
Occupational Safety and Health Administration
Charles N. Jeffress, Assistant Secretary
OSHA 3143
1998 (Revised)
Contents
What is Industrial Hygiene?
How Are OSHA and Industrial Hygiene Related?
What is a Worksite Analysis?
How do IH's Recognize and Control Hazards?
What Are Some Examples of Job Hazards?
Air Contaminants
Chemical Hazards
Biological Hazards
Physical Hazards
Ergonomic Hazards
What Help Can OSHA Provide?
Safety and Health Program Management Guidelines
State Programs
Free Onsite Consultation
Voluntary Protection Programs
Training and Education
Electronic Information
Emergencies
Related OSHA Publications
States with Approved Plans
OSHA Consultation Project Directory
OSHA Area Offices
OSHA Regional Offices
What is Industrial Hygiene?
Industrial hygiene is the science of anticipating, recognizing, evaluating, and controlling workplace
conditions that may cause workers' injury or illness. Industrial hygienists use environmental monitoring and
analytical methods to detect the extent of worker exposure and employ engineering, work practice controls, and
other methods to control potential health hazards.
There has been an awareness of industrial hygiene since antiquity. The environment and its relation to
worker health was recognized as early as the fourth century BC when Hippocrates noted lead toxicity in the mining
industry. In the first century AD, Pliny the Elder, a Roman scholar, perceived health risks to those working with
zinc and sulfur. He devised a face mask made from an animal bladder to protect workers from exposure to dust and
lead fumes. In the second century AD, the Greek physician, Galen, accurately described the pathology of lead
poisoning and also recognized the hazardous exposures of copper miners to acid mists.
In the Middle Ages, guilds worked at assisting sick workers and their families. In 1556 the German scholar,
Agricola, advanced the science of industrial hygiene even further when, in his book De Re Metallica, he described
the diseases of miners and prescribed preventive measures. The book included suggestions for mine ventilation and
worker protection, discussed mining accidents, and described diseases associated with mining occupations such as
silicosis.
Industrial hygiene gained further respectability in 1700 when Bernardo Ramazzini, known as the "father of
industrial medicine," published in Italy the first comprehensive book on industrial medicine, De Morbis Artificum
Diatriba (The Diseases of Workmen). The book contained accurate descriptions of the occupational diseases of most
of the workers of his time. Ramazzini greatly affected the future of industrial hygiene because he asserted that
occupational diseases should be studied in the work environment rather than in hospital wards.
Industrial hygiene received another major boost in 1743 when Ulrich Ellenborg published a pamphlet on
occupational diseases and injuries among gold miners. Ellenborg also wrote about the toxicity of carbon monoxide,
mercury, lead, and nitric acid.
In England in the 18th century, Percival Pott, as a result of his findings on the insidious effects of soot
on chimney sweepers, was a major force in getting the British Parliament to pass the Chimney-Sweepers Act of 1788.
The passage of the English Factory Acts beginning in 1833 marked the first effective legislative acts in the field
of industrial safety. The Acts, however, were intended to provide compensation for accidents rather than to control
their causes. Later, various other European nations developed workers' compensation acts, which stimulated the
adoption of increased factory safety precautions and the establishment of medical services within industrial
plants.
In the early 20th century in the U. S., Dr. Alice Hamilton, led efforts to improve industrial hygiene. She
observed industrial conditions first hand and startled mine owners, factory managers, and state officials with
evidence that there was a correlation between worker illness and their exposure to toxins. She also presented
definitive proposals for eliminating unhealthful working conditions.
At about the same time, U.S. federal and state agencies began investigating health conditions in industry.
In 1908, the public's awareness of occupationally related diseases stimulated the passage of compensation acts
for certain civil employees. States passed the first workers' compensation laws in 1911. And in 1913, the New York
Department of Labor and the Ohio Department of Health established the first state industrial hygiene programs. All
states enacted such legislation by 1948. In most states, there is some compensation coverage for workers contracting
occupational diseases.
The U.S. Congress has passed three landmark pieces of legislation relating to safeguarding workers' health:
(1) the Metal and Nonmetallic Mines Safety Act of 1966, (2) the Federal Coal Mine Safety and Health Act of 1969,
and (3) the Occupational Safety and Health Act of 1970 (Act). Today, nearly every employer is required to implement
the elements of an industrial hygiene and safety, occupational health, or hazard communication program and to be
responsive to the Occupational Safety and Health Administration (OSHA) and the Act and its regulations.
How Are OSHA and Industrial Hygiene Related?
Under the Act, OSHA develops and sets mandatory occupational safety and health requirements applicable to
the more than 6 million workplaces in the U.S. OSHA relies on, among many others, industrial hygienists to
evaluate jobs for potential health hazards. Developing and setting mandatory occupational safety and health
standards involves determining the extent of employee exposure to hazards and deciding what is needed to control
these hazards, thereby protecting the workers. Industrial hygienists, or IHs, are trained to anticipate, recognize,
evaluate, and recommend controls for environmental and physical hazards that can affect the health and well-being
of workers. More than 40 percent of the OSHA compliance officers who inspect America's workplaces are industrial
hygienists. Industrial hygienists also play a major role in developing and issuing OSHA standards to protect
workers from health hazards associated with toxic chemicals, biological hazards, and harmful physical agents. They
also provide technical assistance and support to the agency's national and regional offices. OSHA also employs
industrial hygienists who assist in setting up field enforcement procedures, and who issue technical interpretations
of OSHA regulations and standards. Industrial hygienists analyze, identify, and measure workplace hazards or
stressors that can cause sickness, impaired health, or significant discomfort in workers through chemical, physical,
ergonomic, or biological exposures. Two roles of the OSHA industrial hygienist are to spot those conditions and help
eliminate or control them through appropriate measures.
What is a Worksite Analysis?
A worksite analysis is an essential first step that helps an industrial hygienist determine what jobs and
work stations are the sources of potential problems. During the worksite analysis, the industrial hygienist measures
and identifies exposures, problem tasks, and risks. The most effective worksite analyses include all jobs,
operations, and work activities. The industrial hygienist inspects, researches, or analyzes how the particular
chemicals or physical hazards at that worksite affect worker health. If a situation hazardous to health is
discovered, the industrial hygienist recommends the appropriate corrective actions.
How do IH's Recognize and Control Hazards?
Industrial hygienists recognize that engineering, work practice, and administrative controls are the primary
means of reducing employee exposure to occupational hazards. Engineering controls minimize employee exposure by
either reducing or removing the hazard at the source or isolating the worker from the hazards.
Engineering controls include eliminating toxic chemicals and replacing harmful toxic materials with less
hazardous ones, enclosing work processes or confining work operations, and installing general and local ventilation
systems.
Work practice controls alter the manner in which a task is performed. Some fundamental and easily implemented
work practice controls include (1) following proper procedures that minimize exposures while operating production
and control equipment; (2) inspecting and maintaining process and control equipment on a regular basis; (3)
implementing good house-keeping procedures; (4) providing good supervision and (5) mandating that eating, drinking,
smoking, chewing tobacco or gum, and applying cosmetics in regulated areas be prohibited.
Administrative controls include controlling employees' exposure by scheduling production and workers' tasks,
or both, in ways that minimize exposure levels. For example, the employer might schedule operations with the highest
exposure potential during periods when the fewest employees are present.
When effective work practices and/or engineering controls are not feasible to achieve the permissible exposure
limit, or while such controls are being instituted, and in emergencies, appropriate respiratory equipment must be
used. In addition, personal protective equipment such as gloves, safety goggles, helmets, safety shoes, and
protective clothing may also be required. To be effective, personal protective equipment must be individually
selected, properly fitted and periodically refitted; conscientiously and properly worn; regularly maintained;
and replaced as necessary.
What Are Some Examples of Job Hazards?
To be effective in recognizing and evaluating on-the-job hazards and recommending controls, industrial
hygienists must be familiar with the hazards' characteristics. Major job risks can include air contaminants, and
chemical, biological, physical, and ergonomic hazards.
Air Contaminants
These are commonly classified as either particulate or gas and vapor contaminants. The most common particulate
contaminants include dusts, fumes, mists, aerosols, and fibers. Dusts are solid particles that are formed or
generated from solid organic or inorganic materials by reducing their size through mechanical processes such as
crushing, grinding, drilling, abrading or blasting.
Fumes are formed when material from a volatilized solid condenses in cool air. In most cases, the solid
particles resulting from the condensation react with air to form an oxide.
The term mist is applied to a finely divided liquid suspended in the atmosphere. Mists are generated by
liquids condensing from a vapor back to a liquid or by breaking up a liquid into a dispersed state such as by
splashing, foaming or atomizing. Aerosols are also a form of a mist characterized by highly respirable, minute
liquid particles.
Fibers are solid particles whose length is several times greater than their diameter.
Gases are formless fluids that expand to occupy the space or enclosure in which they are confined. Examples
are welding gases such as acetylene, nitrogen, helium, and argon; and carbon monoxide generated from the operation
of internal combustion engines or by its use as a reducing gas in a heat treating operation. Another example is
hydrogen sulfide which is formed wherever there is decomposition of materials containing sulfur under reducing
conditions.
Liquids change into vapors and mix with the surrounding atmosphere through evaporation. Vapors are the
volatile form of substances that are normally in a solid or liquid state at room temperature and pressure. Vapors
are the gaseous form of substances which are normally in the solid or liquid state at room temperature and pressure.
They are formed by evaporation from a liquid or solid and can be found where parts cleaning and painting takes place
and where solvents are used.
Chemical Hazards
Harmful chemical compounds in the form of solids, liquids, gases, mists, dusts, fumes, and vapors exert toxic
effects by inhalation (breathing), absorption (through direct contact with the skin), or ingestion (eating or
drinking). Airborne chemical hazards exist as concentrations of mists, vapors, gases, fumes, or solids. Some are
toxic through inhalation and some of them irritate the skin on contact; some can be toxic by absorption through the
skin or through ingestion, and some are corrosive to living tissue.
The degree of worker risk from exposure to any given substance depends on the nature and potency of the
toxic effects and the magnitude and duration of exposure.
Information on the risk to workers from chemical hazards can be obtained from the Material Safety Data Sheet
(MSDS) that OSHA'S Hazard Communication Standard requires be supplied by the manufacturer or importer to the
purchaser of all hazardous materials. The MSDS is a summary of the important health, safety, and toxicological
information on the chemical or the mixture's ingredients. Other provisions of the Hazard Communication Standard
require that all containers of hazardous substances in the workplace have appropriate warning and identification
labels.
Biological Hazards
These include bacteria, viruses, fungi, and other living organisms that can cause acute and chronic infections
by entering the body either directly or through breaks in the skin. Occupations that deal with plants or animals
or their products or with food and food processing may expose workers to biological hazards. Laboratory and medical
personnel also can be exposed to biological hazards. Any occupations that result in contact with bodily fluids pose
a risk to workers from biological hazards.
In occupations where animals are involved, biological hazards are dealt with by preventing and controlling
diseases in the animal population as well as proper care and handling of infected animals. Also, effective personal
hygiene, particularly proper attention to minor cuts and scratches, especially those on the hands and forearms,
helps keep worker risks to a minimum.
In occupations where there is potential exposure to biological hazards, workers should practice proper
personal hygiene, particularly hand washing. Hospitals should provide proper ventilation, proper personal protective
equipment such as gloves and respirators, adequate infectious waste disposal systems, and appropriate controls
including isolation in instances of particularly contagious diseases such as tuberculosis.
Physical Hazards
These include excessive levels of ionizing and nonionizing electromagnetic radiation, noise, vibration,
illumination, and temperature.
In occupations where there is exposure to ionizing radiation, time, distance, and shielding are important
tools in ensuring worker safety. Danger from radiation increases with the amount of time one is exposed to it;
hence, the shorter the time of exposure the smaller the radiation danger.
Distance also is a valuable tool in controlling exposure to both ionizing and non-ionizing radiation.
Radiation levels from some sources can be estimated by comparing the squares of the distances between the worker and
the source. For example, at a reference point of 10 feet from a source, the radiation is 1/100 of the intensity at
1 foot from the source.
Shielding also is a way to protect against radiation. The greater the protective mass between a radioactive
source and the worker, the lower the radiation exposure.
Nonionizing radiation also is dealt with by shielding workers from the source. Sometimes limiting exposure
times to nonionizing radiation or increasing the distance is not effective. Laser radiation, for example, cannot be
controlled effectively by imposing time limits. An exposure can be hazardous that is faster than the blinking of an
eye. Increasing the distance from a laser source may require miles before the energy level reaches a point where the
exposure would not be harmful.
Noise, another significant physical hazard, can be controlled by various measures. Noise can be reduced by
installing equipment and systems that have been engineered, designed, and built to operate quietly; by enclosing or
shielding noisy equipment; by making certain that equipment is in good repair and properly maintained with all worn
or unbalanced parts replaced; by mounting noisy equipment on special mounts to reduce vibration; and by installing
silencers, mufflers, or baffles.
Substituting quiet work methods for noisy ones is another significant way to reduce noise, for example,
welding parts rather than riveting them. Also, treating floors, ceilings, and walls with acoustical material can
reduce reflected or reverberant noise. In addition, erecting sound barriers at adjacent work stations around
noisy operations will reduce worker exposure to noise generated at adjacent work stations.
It is also possible to reduce noise exposure by increasing the distance between the source and the receiver,
by isolating workers in acoustical booths, limiting workers' exposure time to noise, and by providing hearing
protection. OSHA requires that workers in noisy surroundings be periodically tested as a precaution against hearing
loss.
Another physical hazard, radiant heat exposure in factories such as steel mills, can be controlled by
installing reflective shields and by providing protective clothing.
Ergonomic Hazards
The science of ergonomics studies and evaluates a full range of tasks including, but not limited to, lifting,
holding, pushing, walking, and reaching. Many ergonomic problems result from technological changes such as increased
assembly line speeds, adding specialized tasks, and increased repetition; some problems arise from poorly designed
job tasks. Any of those conditions can cause ergonomic hazards such as excessive vibration and noise, eye strain,
repetitive motion, and heavy lifting problems. Improperly designed tools or work areas also can be ergonomic
hazards. Repetitive motions or repeated shocks over prolonged periods of time as in jobs involving sorting,
assembling, and data entry can often cause irritation and inflammation of the tendon sheath of the hands and
arms, a condition known as carpal tunnel syndrome.
Ergonomic hazards are avoided primarily by the effective design of a job or jobsite and better designed tools
or equipment that meet workers' needs in terms of physical environment and job tasks. Through thorough worksite
analyses, employers can set up procedures to correct or control ergonomic hazards by using the appropriate
engineering controls (e.g., designing or re-designing work stations, lighting, tools, and equipment); teaching
correct work practices (e.g., proper lifting methods); employing proper administrative controls (e.g., shifting
workers among several different tasks, reducing production demand, and increasing rest breaks); and, if neces-
sary, providing and mandating personal protective equipment. Evaluating working conditions from an ergonomics
standpoint involves looking at the total physiological and psychological demands of the job on the worker.
Overall, industrial hygienists point out that the benefits of a well-designed, ergonomic work environment can
include increased efficiency, fewer accidents, lower operating costs. and more effective use of personnel.
In sum, industrial hygiene encompasses a broad spectrum of the working environment. Early in its history OSHA
recognized industrial hygiene as an integral part of a healthful work setting. OSHA places a high priority on using
industrial hygiene concepts in its health standards and as a tool for effective enforcement of job safety and health
regulations. By recognizing and applying the principles of industrial hygiene to the work environment, America's
workplaces will become more healthful and safer.
What Help Can OSHA Provide?
Safety and Health Program Management Guidelines
Effective management of worker safety and health protection is a decisive factor in reducing the extent and
severity of work-related injuries and illnesses and their related costs. To assist employers and employees in
developing effective safety and health programs, OSHA published recommended Safety and Health Program Management
Guidelines (Federal Register 54(18):3908-3916, January 26, 1989). These voluntary guidelines apply to all places
of employment covered by OSHA. The guidelines identify four general elements that are critical to the development of
a successful safety and health management program:
- management commitment and employee involvement,
- worksite analysis,
- hazard prevention and control, and
- safety and health training.
The guidelines recommend specific actions under each of these general elements to achieve an effective safety
and health program. A single free copy of the guidelines can be obtained from the U.S. Department of Labor OSHA/OICA
Publications. P.O. Box 37535, Washington, DC 20013-7535, by sending a self-addressed mailing label with your
request.
State Programs
The Occupational Safety and Health Act of 1970 encourages states to develop and operate their own job safety
and health plans. States administering occupational safety and health programs through plans approved under section
18(b) of the Act, must adopt standards and enforce requirements that are "at least as effective" as federal
requirements. There are currently 25 state plan states: 23 cover the private and public sectors (state and local
governments) and 2 cover the public sector only. For more information on State Plan states, see the list of states
with approved plans at the end of this publication.
Free Onsite Consultation
Consultation assistance is available on request to employers who want help in establishing and maintaining a
safe and healthful workplace. Largely funded by OSHA, the service is provided at no cost to the employer. Primarily
developed for smaller employers with more hazardous operations, the consultation service is delivered by state
government agencies or universities employing professional safety consultants and health consultants. Comprehensive
assistance includes an appraisal of all work practices and environmental hazards of the workplace and all aspects of
the employer's present job safety and health program.
The program is separate from OSHA'S inspection efforts. No penalties are proposed or citations issued for any
safety or health problems identified by the consultant. The service is confidential.
For more information concerning consultation assistance, see the list of consultation projects at the end of
this publication.
Voluntary Protection Program (VPPs)
Voluntary Protection Programs (VPPs) and onsite consultation services, when coupled with an effective
enforcement program, expand worker protection to help meet the goals of the Act. The three VPPs--Star, Merit, and
Demonstration--are designed to recognize outstanding achievement by companies that have successfully incorporated
comprehensive safety and health programs into their total management system. They motivate others to achieve
excellent safety and health results in the same outstanding way as they establish a cooperative relationship among
employers, employees, and OSHA.
For additional information on VPPs and how to apply, contact the OSHA area or regional offices listed at the
end of this publication.
Training and Education
OSHA area offices offer a variety of information services, such as publications, audiovisual aids, technical
advice, and speakers for special engagements. The OSHA Training Institute in Des Plaines, IL, provides basic and
advanced courses in safety and health for federal and state compliance officers, state consultants, federal agency
personnel, and private sector employers, employees, and their representatives.
OSHA also provides funds to nonprofit organizations, through grants to conduct workplace training and
education in subjects where OSHA believes there is a lack of workplace training. Grants are awarded annually and
grant recipients are expected to contribute 20 percent of the total grant cost. For more information on grants,
training, and education, contact the OSHA Training Institute, Office of Training and Education, 1555 Times Drive,
Des Plaines, IL 60018; telephone (847) 297-4810.
For further information on any OSHA program, contact your nearest OSHA area or regional office listed at the
end of this publication.
Electronic Information
Internet--OSHA standards, interpretations, directives, technical advisors, compliance assistance, and
additional information are now on the World Wide Web at http: //www.osha.gov/.
CD-ROM--A wide variety of OSHA materials, including standards, interpretations, directives, and more, can be
purchased on CD-ROM from the U.S. Government Printing Office. To order, write to the Superintendent of Documents,
P.O. Box 371954, Pittsburgh, PA 15250-7954 or telephone (202)512-1800. Specify OSHA Regulations, Documents, and
Technical Information on CD-ROM (ORDT), GPO Order No. S/N 729-013-00000-5. The price is $38 per year ($47.50
foreign); $15 per single copy ($18.75 foreign).
Emergencies
For life-threatening situations, call (800) 321-OSHA. Complaints will go immediately to the nearest OSHA area
or state office for help.
For further information on any OSHA program, contact your nearest OSHA area or regional office listed at the
end of this publication.
Related OSHA Publications
Single, free copies of the following publications can be obtained from the U.S. Department of Labor,
OSHA/OICA Publications, P.O. Box 37535, Washington, DC 20013-7535. Send a Self-addressed mailing label with your
request.
All About OSHA -- OSHA 2056
Employee Workplace Rights -- OSHA 3021
Consultation Services for the Employer -- OSHA 3047
How to Prepare for Workplace Emergencies -- OSHA 2019
Chemical Hazard Communication -- OSHA 3084
The following publications are available from the Superintendent of Documents, U.S. Government Printing
Office, Washington, DC 20402 (202) 512-1800. Include GPO Order No. and make checks payable to Superintendent of
Documents.
Ergonomics: The Study of work -- OSHA 3125. Order No. 029-016-00 124-7; cost $1.00
Framework for a Comprehensive Health and Safety Program in the Hospital Environment. Order No. 029-016-
00149-2; cost $3.50.
General Industry Digest -- OSHA 2201. Order No. 029-016-00155-2; cost $2.25.
Handbook for Small Business -- OSHA 2209. Order No. 029-016-00144- 1; cost $4.00.
Job HazardAnalysis -- OSHA 3071. Order No. 029-016-00142-5; cost $1.00.
Working Safely with Video Display Terminals -- OSHA 3092. Order No. 029-016-00123-9; cost $1.00.
States with Approved Plans
Commissioner
Alaska Department of Labor
1111 West 8th Street
Room 306
Juneau, AK 99801
(907) 465-2700
|
Director
Industrial Commission of Arizona
800 W. Washington
Phoenix, AZ 85007
(602) 542-5795
|
Director
California Department of Industrial Relations
45 Fremont Street
San Francisco, CA 94105
(415) 972-8835
|
Commissioner
Connecticut Department of Labor
200 Folly Brook Boulevard
Wethersfield, CT 06109
(203) 566-5123
|
Director
Hawaii Department of Labor and Industrial Relations
830 Punchbowl Street
Honolulu, HI 96813
(808) 586-8844
|
Commissioner
Indiana Department of Labor - State OffIce Building
402 West Washington Street
Room W195
Indianapolis, IN 46204
(317) 232-2378
|
Commissioner
Iowa Division of Labor Services
1000 E. Grand Avenue
Des Moines, IA 50319
(515) 281-3447 |
Secretary
Kentucky Labor Cabinet
1049 U.S. Highway,
127 South, Suite 2
Frankfort, KY 40601
(502) 564-3070 |
Commissioner
Maryland Division of Labor and Industry
Department of Licensing and Regulation
1100 N. Eutaw Street,
Rm. 613
Baltimore, MD 21202-2206
(410) 767-2215
|
Director
Michigan Department of Consumer and Industry Services
4th Floor Law Building
P.O. Box 30004
Lansing, MI 48909
(517) 373-7230 |
Commissioner
Minnesota Department of Labor and Industry
443 Lafayette Road
St. Paul, MN 55155
(612) 296-2342 |
Director
Nevada Division of Industrial Relations
400 West King Street
Carson City, NV 89710
(702) 687-3032
|
Secretary
New Mexico Environment Department
1190 St. Francis Drive
P.O. Box 26110
Santa Fe, NM 87502
(505) 827-2850
|
Commissioner
New York Department of Labor
W. Averell Hariman State Office Building -12
Room 500
Albany, NY 12240
(518) 457-2741
|
Commissioner
North Carolina Department of Labor
319 Chapanoke Road
Raleigh, NC 27603
(919) 662-4585
|
Administrator
Department of Consumer and Business Services
Occupational Safety and Health Division (OR-OSHA)
Labor and Industries Building
Room 430
Salem, OR 97310
(503) 378-3272
|
Secretary
Puerto Rico Department of Labor and Human Resources
Prudencio Rivera Martinez Building
505 Munoz Rivera Avenue
HatoRey,PR00918
(809) 754-2119
|
Commissioner
South Carolina Department of Labor,
Licensing, and Regulation
Koger Office Park, Kingstree Building
110 Centerview Drive - P.O. Box 11329
Columbia, SC 29210
(803) 896-4300
|
Commissioner
Tennessee Department of Labor
Attention: Robert Taylor
710 James Robertson Parkway
Nashville, TN 37243-0659
(615) 741-2582 |
Commissioner
Industrial Commission of Utah
160 East 300 South,
3rd Floor
P.O. Box 146600
Salt Lake City, UT 84114-6600
(801) 530-6898 |
Commissioner
Vermont Department of Labor and Industry
National Life Building
Drawer 20
120 State Street
Montpelier, VT 05620
(802) 828-2288
|
Commissioner
Virgin Islands Department of Labor
2131 Hospital Street,
Box 890
Christiansted
St. Croix, VI 00820-4666
(809) 773-1994
|
Commissioner
Virginia Department of Labor and Industry
Powers-Taylor Building
13 South 13th Street
Richmond, VA 23219
(804) 786-2377
|
Director
Washington Department of Labor and Industries
General Administration Building
P.O. Box 44001
Olympia, WA 98504-4001
(360) 902-4200
|
Administrator
Occupational Safety and Compensation Division (WSC)
Wyoming Department of Employment
Herschler Building,
2nd Floor East
122 West 25th Street
Cheyenne, WY 82002
(307) 777-7786
|
OSHA Consultation Project Directory
State . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Telephone
Arizona . . . . . . . . . . . . . . . . . . . . . . . . . . (602) 542-5795
Arkansas . . . . . . . . . . . . . . . . . . . . . . . . . .(501) 682-4522
California . . . . . . . . . . . . . . . . . . . . . . . . .(415) 982-8515
Colorado . . . . . . . . . . . . . . . . . . . . . . . . . .(970) 491-6151
Connecticut . . . . . . . . . . . . . . . . . . . . . . . . (860) 566-4550
Delaware . . . . . . . . . . . . . . . . . . . . . . . . . .(302) 761-8219
District of Columbia . . . . . . . . . . . . . . . . . . . .(202) 576-6339
Florida . . . . . . . . . . . . . . . . . . . . . . . . . . (904) 488-3044
Georgia . . . . . . . . . . . . . . . . . . . . . . . . . . (404) 894-2646
Guam . . . . . . . . . . . . . . . . . . . . . . . . . 011 (671) 475-0136
Hawaii . . . . . . . . . . . . . . . . . . . . . . . . . . . (808) 586-9100
Idaho . . . . . . . . . . . . . . . . . . . . . . . . . . . .(208) 385-3283
Illinois . . . . . . . . . . . . . . . . . . . . . . . . . . (312) 814-2337
Indiana . . . . . . . . . . . . . . . . . . . . . . . . . . .(317) 232-2688
Iowa . . . . . . . . . . . . . . . . . . . . . . . . . . . . (515) 281-5352
Kansas . . . . . . . . . . . . . . . . . . . . . . . . . . . (913) 296-7476
Kentucky . . . . . . . . . . . . . . . . . . . . . . . . . . (502) 564-6895
Louisiana . . . . . . . . . . . . . . . . . . . . . . . . . .(504) 342-9601
Maine . . . . . . . . . . . . . . . . . . . . . . . . . . . .(207) 624-6460
Maryland . . . . . . . . . . . . . . . . . . . . . . . . . . (410) 333-4210
Massachusetts . . . . . . . . . . . . . . . . . . . . . . . .(617) 727-3982
Michigan . . . . . . . . . . . . . . . . . . . . . . . . (H) (517) 332-8250
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . (S) (517) 322-1809
Minnesota . . . . . . . . . . . . . . . . . . . . . . . . . .(612) 297-2393
Mississippi . . . . . . . . . . . . . . . . . . . . . . . . .(601) 987-3981
Missouri . . . . . . . . . . . . . . . . . . . . . . . . . . (573) 751-3403
Montana . . . . . . . . . . . . . . . . . . . . . . . . . . .(406) 444-6418
Nebraska . . . . . . . . . . . . . . . . . . . . . . . . . . (402) 471-4717
Nevada . . . . . . . . . . . . . . . . . . . . . . . . . . . (702) 486-5016
New Hampshire . . . . . . . . . . . . . . . . . . . . . . . .(603) 271-2024
New Jersey . . . . . . . . . . . . . . . . . . . . . . . . . (609) 292-2424
New Mexico . . . . . . . . . . . . . . . . . . . . . . . . . (505) 827-4230
New York . . . . . . . . . . . . . . . . . . . . . . . . . . (518) 457-2481
North Carolina . . . . . . . . . . . . . . . . . . . . . . . (919) 662-4644
North Dakota . . . . . . . . . . . . . . . . . . . . . . . . (701) 328-5188
Ohio . . . . . . . . . . . . . . . . . . . . . . . . . . . . (614) 644-2246
Oklahoma . . . . . . . . . . . . . . . . . . . . . . . . . . (405) 528-1500
Oregon . . . . . . . . . . . . . . . . . . . . . . . . . . . (503) 378-3272
Pennsylvania . . . . . . . . . . . . . . . . . . . . . . . . (412) 357-2561
Puerto Rico . . . . . . . . . . . . . . . . . . . . . . . . .(809) 754-2188
Rhode Island . . . . . . . . . . . . . . . . . . . . . . . . (401) 277-2438
South Carolina . . . . . . . . . . . . . . . . . . . . . . . (803) 734-9614
South Dakota . . . . . . . . . . . . . . . . . . . . . . . . (605) 688-4101
Tennessee . . . . . . . . . . . . . . . . . . . . . . . . . .(615) 741-7036
Texas . . . . . . . . . . . . . . . . . . . . . . . . . . . .(512) 440-3834
Utah . . . . . . . . . . . . . . . . . . . . . . . . . . . . (801) 530-6868
Vermont . . . . . . . . . . . . . . . . . . . . . . . . . . .(802) 828-2765
Virginia . . . . . . . . . . . . . . . . . . . . . . . . . . (804) 786-6359
Virgin Islands . . . . . . . . . . . . . . . . . . . . . . . (809) 772-1315
Washington . . . . . . . . . . . . . . . . . . . . . . . . . (360) 902-5638
West Virginia . . . . . . . . . . . . . . . . . . . . . . . .(304) 558-7890
Wisconsin . . . . . . . . . . . . . . . . . . . . . . . .(H) (6O8) 266-8579
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . (S) (414) 521-5063
Wyoming . . . . . . . . . . . . . . . . . . . . . . . . . . (307) 777-7700
(H) - Health
(S) - Safety
OSHA Area Offices
Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Telephone
Albany, NY . . . . . . . . . . . . . . . . . . . . . . . . . (518) 464-6742
Albuquerque, NM . . . . . . . . . . . . . . . . . . . . . . .(505) 248-5302
Allentown, PA . . . . . . . . . . . . . . . . . . . . . . . .(610) 776-0592
Anchorage, AK . . . . . . . . . . . . . . . . . . . . . . . .(907) 271-5152
Appleton, WI . . . . . . . . . . . . . . . . . . . . . . . . (414) 734-4521
Austin, TX . . . . . . . . . . . . . . . . . . . . . . . . . (512) 916-5783
Avenel, NJ . . . . . . . . . . . . . . . . . . . . . . . . . (908) 750-3270
Baltimore, MD . . . . . . . . . . . . . . . . . . . . . . . .(410) 962-2840
Bangor, ME . . . . . . . . . . . . . . . . . . . . . . . . . (207) 941-8177
Baton Rouge, LA . . . . . . . . . . . . . . . . . . . . . . .(504) 389-0474
Bayside. NY . . . . . . . . . . . . . . . . . . . . . . . . (718) 279-9060
Bellevue, WA . . . . . . . . . . . . . . . . . . . . . . . . (206) 553-7520
Billings, MT . . . . . . . . . . . . . . . . . . . . . . . . (406) 247-7494
Birmingham, AL . . . . . . . . . . . . . . . . . . . . . . . (205) 731-1534
Bismarck, ND . . . . . . . . . . . . . . . . . . . . . . . . (701) 250-4521
Boise, ID . . . . . . . . . . . . . . . . . . . . . . . . . .(208) 334-1867
Bowmansville, NY . . . . . . . . . . . . . . . . . . . . . . (716) 684-3891
Braintree, MA . . . . . . . . . . . . . . . . . . . . . . . .(617) 565-6924
Bridgeport, CT . . . . . . . . . . . . . . . . . . . . . . . (203) 579-5581
Calumet City, IL . . . . . . . . . . . . . . . . . . . . . . (708) 891-3800
Carson City, NV . . . . . . . . . . . . . . . . . . . . . . .(702) 885-6963
Charleston, WV . . . . . . . . . . . . . . . . . . . . . . . (304) 347-5937
Cincinnati, OH . . . . . . . . . . . . . . . . . . . . . . . (513) 841-4132
Cleveland. OH . . . . . . . . . . . . . . . . . . . . . . . .(216) 522-3818
Columbia, SC . . . . . . . . . . . . . . . . . . . . . . . . (803) 765-5904
Columbus, OH . . . . . . . . . . . . . . . . . . . . . . . . (614) 469-5582
Concord, NH . . . . . . . . . . . . . . . . . . . . . . . . .(603) 225-1629
Corpus Christi, TX . . . . . . . . . . . . . . . . . . . . . (512) 888-3420
Dallas, TX . . . . . . . . . . . . . . . . . . . . . . . . . (214) 320-2400
Denver, CO . . . . . . . . . . . . . . . . . . . . . . . . . (303) 844-5285
Des Plaines, IL . . . . . . . . . . . . . . . . . . . . . . .(847) 803-4800
Des Moines, IA . . . . . . . . . . . . . . . . . . . . . . . (515) 284-4794
Englewood, CO . . . . . . . . . . . . . . . . . . . . . . . .(303) 843-4500
Erie, PA . . . . . . . . . . . . . . . . . . . . . . . . . . (814) 833-5758
Fort Lauderdale, FL . . . . . . . . . . . . . . . . . . . . .(305) 424-0242
Fort Worth, TX . . . . . . . . . . . . . . . . . . . . . . . (817) 581-7303
Frankfort, KY . . . . . . . . . . . . . . . . . . . . . . . .(502) 227-7024
Harrisburg, PA . . . . . . . . . . . . . . . . . . . . . . . (717) 782-3902
Hartford, CT . . . . . . . . . . . . . . . . . . . . . . . . (203) 240-3152
Hasbrouck Heights, NJ . . . . . . . . . . . . . . . . . . . .(201) 288-1700
Guaynabo, PR . . . . . . . . . . . . . . . . . . . . . . . . (787) 277-1560
Honolulu, HI . . . . . . . . . . . . . . . . . . . . . . . . (808) 541-2685
Houston, TX . . . . . . . . . . . . . . . . . . . . . . . . .(713) 286-0583
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (713) 591-2438
Indianapolis, IN . . . . . . . . . . . . . . . . . . . . . . (317) 226-7290
Jackson, MS . . . . . . . . . . . . . . . . . . . . . . . . .(601) 965-4606
Jacksonville, FL . . . . . . . . . . . . . . . . . . . . . . (904) 232-2895
Kansas City, MO . . . . . . . . . . . . . . . . . . . . . . .(816) 483-9531
Lansing, MI . . . . . . . . . . . . . . . . . . . . . . . . .(517) 377-1892
Little Rock. AR . . . . . . . . . . . . . . . . . . . . . . .(501) 324-6291
Lubbock. TX . . . . . . . . . . . . . . . . . . . . . . . . .(806) 743-7681
Madison. WI . . . . . . . . . . . . . . . . . . . . . . . . .(608) 264-5388
Marlton, NJ . . . . . . . . . . . . . . . . . . . . . . . . .(609) 757-5181
Methuen, MA . . . . . . . . . . . . . . . . . . . . . . . . .(6l7) 565-8110
Milwaukee, WI . . . . . . . . . . . . . . . . . . . . . . . .(414) 297-3315
Minneapolis, MN . . . . . . . . . . . . . . . . . . . . . . .(651) 664-5460
Mobile. AL . . . . . . . . . . . . . . . . . . . . . . . . . (334) 441-6131
Nashville, TN . . . . . . . . . . . . . . . . . . . . . . . .(615) 781-5423
New York, NY . . . . . . . . . . . . . . . . . . . . . . . . (212) 466-2482
Norfolk, VA . . . . . . . . . . . . . . . . . . . . . . . . .(804) 441-3820
North Aurora, IL . . . . . . . . . . . . . . . . . . . . . . (630) 896-8700
Oklahoma City, OK . . . . . . . . . . . . . . . . . . . . . .(405) 231-5351
Omaha. NE . . . . . . . . . . . . . . . . . . . . . . . . . .(402) 221-3182
Parsippany, NJ . . . . . . . . . . . . . . . . . . . . . . . (201) 263-1003
Peoria, IL . . . . . . . . . . . . . . . . . . . . . . . . . (309) 671-7033
Philadelphia, PA . . . . . . . . . . . . . . . . . . . . . . (215) 597-4955
Phoenix, AZ . . . . . . . . . . . . . . . . . . . . . . . . .(602) 640-2007
Pittsburgh, PA . . . . . . . . . . . . . . . . . . . . . . . (412) 644-2903
Portland, OR . . . . . . . . . . . . . . . . . . . . . . . . (503) 326-2251
Providence, RI . . . . . . . . . . . . . . . . . . . . . . . (401) 528-4669
Raleigh, NC . . . . . . . . . . . . . . . . . . . . . . . . .(919) 856-4770
Salt Lake City, UT . . . . . . . . . . . . . . . . . . . . . (801) 524-5080
San Francisco, CA . . . . . . . . . . . . . . . . . . . . . .(415) 744-7120
Savannah, GA . . . . . . . . . . . . . . . . . . . . . . . . (912) 652-4393
Smyrna, GA . . . . . . . . . . . . . . . . . . . . . . . . . (404) 984-8700
Springfield, MA . . . . . . . . . . . . . . . . . . . . . . .(413) 785-0123
St. Louis, MO . . . . . . . . . . . . . . . . . . . . . . . .(314) 425-4249
Syracuse, NY . . . . . . . . . . . . . . . . . . . . . . . . (315) 451-0808
Tampa, FL . . . . . . . . . . . . . . . . . . . . . . . . . .(813) 626-1177
Tarrytown, NY . . . . . . . . . . . . . . . . . . . . . . . .(914) 524-7510
Toledo, OH . . . . . . . . . . . . . . . . . . . . . . . . . (419) 259-7542
Tucker, GA . . . . . . . . . . . . . . . . . . . . . . . . . (770) 493-6644
Westbury, NY . . . . . . . . . . . . . . . . . . . . . . . . (516) 334-3344
Wichita, KS . . . . . . . . . . . . . . . . . . . . . . . . .(316) 269-6644
Wilkes-Barre, PA . . . . . . . . . . . . . . . . . . . . . . (717) 826-6538
Wilmington, DE . . . . . . . . . . . . . . . . . . . . . . . (3O2) 573-6115
OSHA Regional Offices
Region I
(CT,* MA, ME, NH, RI, VT*)
JKF Federal Building
Room E-340
Boston, MA 02203
Telephone: (617) 565-9860
|
Region II
(NJ, NY,* PR,* VI*)
201 Varick Street
Room 670
New York, NY 10014
Telephone: (212) 337-2378
|
Region III
(DC, DE, MD,* PA, VA,* WV)
Gateway Building, Suite 2100
3535 Market Street
Philadelphia, PA 19104
Telephone: (215) 596-1201
|
Region IV
(AL, FL, GA, KY,* MS, NC, SC,* TN*)
Atlanta Federal Center
61 Forsyth Street, SW,
Room 6T50
Atlanta, GA 30303
Telephone: (404) 562-2300
|
Region V
(IL, IN,* MI,* MN,* OH, WI)
230 South Dearborn Street
Room 3244
Chicago, IL 60604
Telephone: (312) 353-2220
|
Region VI
(AR, LA, NM,* OK, TX)
525 Griffin Street
Room 602
Dallas, TX 75202
Telephone: (2 14) 767-4731
|
Region VII
(IA,* KS, MO, NE)
City Center Square
1100 Main Street, Suite 800
Kansas City, MO 64105
Telephone: (8 16) 426-5861
|
Region VIII
(CO, MT, ND, SD, UT,* WY*)
1999 Broadway, Suite 1690
Denver, CO 80202-5716
Telephone: (303) 844-1600
|
Region IX
(American Samoa, AZ,* CA,*
Guam, HI,* NV,* Trust
Territories of the Pacific)
71 Stevenson Street
Room 420
San Francisco, CA 94105
Telephone: (4 15) 975-4310
|
Region X
(AK,* ID, OR,* WA*)
1111 Third Avenue
Suite 715
Seattle, WA 98101-3212
Telephone: (206) 553-5930
|
* These states and territories operate their own OSHA-approved job safety and health
programs (Connecticut and New York plans cover public employees only). States with approved
programs must have a standard that is identical to, or at least as effective, as the federal standard.
OSHA Information Booklet #3143 -- Industrial Hygiene
|